logo Debian Debian Debian-France Debian-Facile Debian-fr.org Forum-Debian.fr Debian ? Communautés logo inclusivité

Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#1 14-04-2014 10:22:00

vinou33
Membre
Distrib. : Debian Jessie
Noyau : 3.13-1-amd64
(G)UI : GNOME 3
Inscription : 23-03-2014

DUAL-BOOT Identifier une partition UEFI (gparted screenshot)

Bonjour tout le monde,

Demain, je vais recevoir mon nouvel ordinateur. Hier, j'ai emprunté un ordinateur portable avec le boot UEFI à un mec dans la rue et j'ai lancé "gparted". Mon objectif était de découvrir comment identifier une partition UEFI.
Néanmoins, j'ai du désactiver la fonction "secure boot" pour pouvoir lancer gparted. Au final, je me suis retrouvé avec une screenshot (en dessous) et pourriez vous m'aider un peu tout d'abord sur ces questions: Quelle est la partition UEFI dans l'impression d'écran ci dessous ? Est-ce sda3 (l'inconnue) ou sda1 (celle de boot) ? Je ne sais pas si cela peut avoir modifié quelque chose mais je rappelle que j'ai désactivé le secure boot avant de lancer gparted.

lt-asus.jpeg

J'ai aussi deux autres questions qui me turlupinent:
   - Faudra-t-il que je désactive la fonction "secure boot" dans le bios avant de lancer l'installation de Debian Wheezy amd64 Oo ?
   - Quels liens "répertoire <=> partition" vais je avoir à déclarer si je veux installer Debian en mode UEFI ?
     Est ce le bon choix Oo ?  => "/boot/uefi" + "/" + "swap" + "/home"   

Je vous remercie d'avance pour votre aide et vous souhaite une bonne journée.

Cordialement,

Vinou33

Hors ligne

#2 14-04-2014 10:32:12

captnfab
Admin-Girafe
Lieu : /dev/random
Distrib. : Debian
Noyau : Dur
(G)UI : gui gui, je zuis un doiseau
Inscription : 07-07-2008
Site Web

Re : DUAL-BOOT Identifier une partition UEFI (gparted screenshot)

Plop,

La partition UEFI est tout le temps en FAT32 (en fait exFAT, une extension de FAT32), et c'est en général (ou peut-être tout le temps ?) la première. Elle n'est normalement pas très grande.

Il te faut désactiver le secure-boot dans l'UEFI pour installer et pour lancer Debian. Secure-boot demande à ce que le boot-loader soit signé par microsoft. Ce qui est (entre autre) non-libre.

La partition UEFI doit être montée dans /boot/efi.

captnfab,
Association Debian-Facile, bépo.
TheDoctor: Your wish is my command… But be careful what you wish for.

Hors ligne

#3 14-04-2014 10:41:43

vinou33
Membre
Distrib. : Debian Jessie
Noyau : 3.13-1-amd64
(G)UI : GNOME 3
Inscription : 23-03-2014

Re : DUAL-BOOT Identifier une partition UEFI (gparted screenshot)

Ok. Donc c'est sda1 smile. Merci beaucoup. Mais il faudra donc toujours que le secure boot soit désactivé. Je prends note. Thx tongue Tu me sauves la vie. Si je faisais le test sur le petit PC là, comment je pourrais vérifier que tout marche niveau UEFI après l'installation si le secure boot est désactivé ? Simplement par le lancement de grub ? Ou me faudra-t-il une autre version de grub ?

Hors ligne

#4 14-04-2014 11:12:38

captnfab
Admin-Girafe
Lieu : /dev/random
Distrib. : Debian
Noyau : Dur
(G)UI : gui gui, je zuis un doiseau
Inscription : 07-07-2008
Site Web

Re : DUAL-BOOT Identifier une partition UEFI (gparted screenshot)

Je ne comprends pas ta question.

Le Grub installé par Debian en mode UEFI (mais secure-boot désactivé) est un Grub compatible UEFI, donc normalement tout roule d'office.

captnfab,
Association Debian-Facile, bépo.
TheDoctor: Your wish is my command… But be careful what you wish for.

Hors ligne

#5 14-04-2014 11:26:26

vinou33
Membre
Distrib. : Debian Jessie
Noyau : 3.13-1-amd64
(G)UI : GNOME 3
Inscription : 23-03-2014

Re : DUAL-BOOT Identifier une partition UEFI (gparted screenshot)

Okidoki merci.

Hors ligne

#6 14-04-2014 17:18:25

ridix
Membre
Lieu : chtimi
Distrib. : bureau et portable-WHEEZY +backports
Noyau : 3.2.0-4-amd64
(G)UI : XFCE
Inscription : 29-01-2014

Re : DUAL-BOOT Identifier une partition UEFI (gparted screenshot)

captnfab a écrit :

Plop,

La partition UEFI est tout le temps en FAT32 (en fait exFAT, une extension de FAT32), et c'est en général (ou peut-être tout le temps ?) la première. Elle n'est normalement pas très grande.

.



La partition EFI doit avoir n'importe-quelle emplacement entièrement inclus dans les 100 premiers Go du disque

Dernière modification par ridix (14-04-2014 17:24:52)

Hors ligne

#7 14-04-2014 17:30:36

vinou33
Membre
Distrib. : Debian Jessie
Noyau : 3.13-1-amd64
(G)UI : GNOME 3
Inscription : 23-03-2014

Re : DUAL-BOOT Identifier une partition UEFI (gparted screenshot)

Oui mais là ce n'est pas trop clair.  Pourrais tu me dire plutôt selon toi qu'elle est la partition uefi sur l'image stp ?

Hors ligne

#8 14-04-2014 17:40:18

ridix
Membre
Lieu : chtimi
Distrib. : bureau et portable-WHEEZY +backports
Noyau : 3.2.0-4-amd64
(G)UI : XFCE
Inscription : 29-01-2014

Re : DUAL-BOOT Identifier une partition UEFI (gparted screenshot)

il faudrait que tu télécharge  Linux Secure Remix

http://doc.ubuntu-fr.org/linux_secure_remix?redirect=1

et Créer un rapport Boot-Info

http://doc.ubuntu-fr.org/tutoriel/boot-info

surtout ne clique pas sur réparation recommandée !!!

et tu poste ensuite ton boot info !

Cela vient de Ubuntu mais je connais bien cette Méthode

Hors ligne

#9 14-04-2014 17:42:29

ridix
Membre
Lieu : chtimi
Distrib. : bureau et portable-WHEEZY +backports
Noyau : 3.2.0-4-amd64
(G)UI : XFCE
Inscription : 29-01-2014

Re : DUAL-BOOT Identifier une partition UEFI (gparted screenshot)

j'ai posté un exemple de boot info dessous

Dernière modification par ridix (14-04-2014 19:23:41)

Hors ligne

#10 14-04-2014 17:44:02

captnfab
Admin-Girafe
Lieu : /dev/random
Distrib. : Debian
Noyau : Dur
(G)UI : gui gui, je zuis un doiseau
Inscription : 07-07-2008
Site Web

Re : DUAL-BOOT Identifier une partition UEFI (gparted screenshot)

@ridix: je ne comprends pas pourquoi tu lui demandes de faire ça. Ici la partition UEFI est clairement /dev/sda1

Pour s'en assurer, il suffit de la monter et de vérifier qu'elle contient bien un dossier « EFI ».

captnfab,
Association Debian-Facile, bépo.
TheDoctor: Your wish is my command… But be careful what you wish for.

Hors ligne

#11 14-04-2014 17:46:34

ridix
Membre
Lieu : chtimi
Distrib. : bureau et portable-WHEEZY +backports
Noyau : 3.2.0-4-amd64
(G)UI : XFCE
Inscription : 29-01-2014

Re : DUAL-BOOT Identifier une partition UEFI (gparted screenshot)


Ubuntu Pastebin
Paste from boot-repair at Tue, 25 Mar 2014 12:33:27 +0000
Download as text



 

 Boot Info Script e7fc706 + Boot-Repair extra info      [Boot-Info 12May2013]


============================= Boot Info Summary: ===============================

 => No boot loader is installed in the MBR of /dev/sda.

sda1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  FAT32
    Boot sector info:  According to the info in the boot sector, sda1 starts
                       at sector 0. But according to the info from fdisk,
                       sda1 starts at sector 161792.
    Operating System:  
    Boot files:        /EFI/ubuntu/MokManager.efi /EFI/ubuntu/grubx64.efi
                       /EFI/ubuntu/shimx64.efi

sda2: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info:
    Operating System:  Ubuntu 13.10
    Boot files:        /boot/grub/grub.cfg /etc/fstab

sda3: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info:
    Operating System:  
    Boot files:        

sda4: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info:

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________

Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1                   1   976,773,167   976,773,167  ee GPT


GUID Partition Table detected.

Partition    Start Sector    End Sector  # of Sectors System
/dev/sda1         161,792       987,135       825,344 EFI System partition
/dev/sda2         987,136    94,662,655    93,675,520 Data partition (Linux)
/dev/sda3      94,662,656   212,865,023   118,202,368 Data partition (Linux)
/dev/sda4     212,865,024   229,670,911    16,805,888 Swap partition (Linux)

"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/loop0                                              squashfs  
/dev/sda1        E58C-719F                              vfat      
/dev/sda2        4633b433-12ce-4b65-8af3-dcc2450db673   ext4      
/dev/sda3        9ef4b505-0b72-49f9-b961-9143b038012e   ext4      
/dev/sda4        a7fa36ad-fea8-4808-bbbc-820c953fb7ad   swap      
/dev/sr0                                                iso9660    Linux Secure 13.04 64bit

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/loop0       /rofs                    squashfs   (ro,noatime)
/dev/sr0         /cdrom                   iso9660    (ro,noatime)


=========================== sda2/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
set default="0"

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}

function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}

function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  4633b433-12ce-4b65-8af3-dcc2450db673
else
  search --no-floppy --fs-uuid --set=root 4633b433-12ce-4b65-8af3-dcc2450db673
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=fr_FR
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ]; then
  set timeout=-1
else
  set timeout=10
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
  clear
fi
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
  set gfxpayload="${1}"
  if [ "${1}" = "keep" ]; then
    set vt_handoff=vt.handoff=7
  else
    set vt_handoff=
  fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-4633b433-12ce-4b65-8af3-dcc2450db673' {
recordfail
  load_video
  gfxmode $linux_gfx_mode
  insmod gzio
  insmod part_gpt
  insmod ext2
  set root='hd0,gpt2'
  if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  4633b433-12ce-4b65-8af3-dcc2450db673
  else
    search --no-floppy --fs-uuid --set=root 4633b433-12ce-4b65-8af3-dcc2450db673
  fi
  linux /boot/vmlinuz-3.11.0-18-generic.efi.signed root=UUID=4633b433-12ce-4b65-8af3-dcc2450db673 ro   quiet splash $vt_handoff
  initrd  /boot/initrd.img-3.11.0-18-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-4633b433-12ce-4b65-8af3-dcc2450db673' {
  menuentry 'Ubuntu, avec Linux 3.11.0-18-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.11.0-18-generic-advanced-4633b433-12ce-4b65-8af3-dcc2450db673' {
  recordfail
    load_video
    gfxmode $linux_gfx_mode
    insmod gzio
    insmod part_gpt
    insmod ext2
    set root='hd0,gpt2'
    if [ x$feature_platform_search_hint = xy ]; then
      search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  4633b433-12ce-4b65-8af3-dcc2450db673
    else
      search --no-floppy --fs-uuid --set=root 4633b433-12ce-4b65-8af3-dcc2450db673
    fi
    echo  'Chargement de Linux 3.11.0-18-generic…'
    linux /boot/vmlinuz-3.11.0-18-generic.efi.signed root=UUID=4633b433-12ce-4b65-8af3-dcc2450db673 ro   quiet splash $vt_handoff
    echo  'Chargement du disque mémoire initial…'
    initrd  /boot/initrd.img-3.11.0-18-generic
  }
  menuentry 'Ubuntu, avec Linux 3.11.0-18-generic (mode de dépannage)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.11.0-18-generic-recovery-4633b433-12ce-4b65-8af3-dcc2450db673' {
  recordfail
    load_video
    insmod gzio
    insmod part_gpt
    insmod ext2
    set root='hd0,gpt2'
    if [ x$feature_platform_search_hint = xy ]; then
      search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  4633b433-12ce-4b65-8af3-dcc2450db673
    else
      search --no-floppy --fs-uuid --set=root 4633b433-12ce-4b65-8af3-dcc2450db673
    fi
    echo  'Chargement de Linux 3.11.0-18-generic…'
    linux /boot/vmlinuz-3.11.0-18-generic.efi.signed root=UUID=4633b433-12ce-4b65-8af3-dcc2450db673 ro recovery nomodeset
    echo  'Chargement du disque mémoire initial…'
    initrd  /boot/initrd.img-3.11.0-18-generic
  }
  menuentry 'Ubuntu, avec Linux 3.11.0-12-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.11.0-12-generic-advanced-4633b433-12ce-4b65-8af3-dcc2450db673' {
  recordfail
    load_video
    gfxmode $linux_gfx_mode
    insmod gzio
    insmod part_gpt
    insmod ext2
    set root='hd0,gpt2'
    if [ x$feature_platform_search_hint = xy ]; then
      search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  4633b433-12ce-4b65-8af3-dcc2450db673
    else
      search --no-floppy --fs-uuid --set=root 4633b433-12ce-4b65-8af3-dcc2450db673
    fi
    echo  'Chargement de Linux 3.11.0-12-generic…'
    linux /boot/vmlinuz-3.11.0-12-generic root=UUID=4633b433-12ce-4b65-8af3-dcc2450db673 ro   quiet splash $vt_handoff
    echo  'Chargement du disque mémoire initial…'
    initrd  /boot/initrd.img-3.11.0-12-generic
  }
  menuentry 'Ubuntu, avec Linux 3.11.0-12-generic (mode de dépannage)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.11.0-12-generic-recovery-4633b433-12ce-4b65-8af3-dcc2450db673' {
  recordfail
    load_video
    insmod gzio
    insmod part_gpt
    insmod ext2
    set root='hd0,gpt2'
    if [ x$feature_platform_search_hint = xy ]; then
      search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  4633b433-12ce-4b65-8af3-dcc2450db673
    else
      search --no-floppy --fs-uuid --set=root 4633b433-12ce-4b65-8af3-dcc2450db673
    fi
    echo  'Chargement de Linux 3.11.0-12-generic…'
    linux /boot/vmlinuz-3.11.0-12-generic root=UUID=4633b433-12ce-4b65-8af3-dcc2450db673 ro recovery nomodeset
    echo  'Chargement du disque mémoire initial…'
    initrd  /boot/initrd.img-3.11.0-12-generic
  }
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
if [ "x${timeout}" != "x-1" ]; then
  if keystatus; then
    if keystatus --shift; then
      set timeout=-1
    else
      set timeout=0
    fi
  else
    if sleep --interruptible 3 ; then
      set timeout=0
    fi
  fi
fi
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
  fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sda2/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda2 during installation
UUID=4633b433-12ce-4b65-8af3-dcc2450db673 /               ext4    errors=remount-ro 0       1
# /boot/efi was on /dev/sda1 during installation
UUID=E58C-719F  /boot/efi       vfat    defaults        0       1
# /home was on /dev/sda3 during installation
UUID=9ef4b505-0b72-49f9-b961-9143b038012e /home           ext4    defaults        0       2
# swap was on /dev/sda4 during installation
UUID=a7fa36ad-fea8-4808-bbbc-820c953fb7ad none            swap    sw              0       0
--------------------------------------------------------------------------------

=================== sda2: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

  42.597454071 = 45.738668032   boot/grub/grub.cfg                             1
   1.460296631 = 1.567981568    boot/vmlinuz-3.11.0-12-generic                 1
   2.972045898 = 3.191209984    boot/vmlinuz-3.11.0-18-generic                 1
   3.159549713 = 3.392540672    boot/vmlinuz-3.11.0-18-generic.efi.signed      1
   1.460296631 = 1.567981568    vmlinuz                                        1
   3.229324341 = 3.467460608    boot/initrd.img-3.11.0-12-generic              1
   4.377571106 = 4.700381184    boot/initrd.img-3.11.0-18-generic              1
   3.229324341 = 3.467460608    initrd.img                                     1

=============================== StdErr Messages: ===============================

File descriptor 8 (/proc/3876/mounts) leaked on lvscan invocation. Parent PID 12104: bash
  No volume groups found

ADDITIONAL INFORMATION :
=================== log of boot-repair 2014-03-25__12h29 ===================
boot-repair version : 3.199~ppa2~raring
boot-sav version : 3.199~ppa2~raring
glade2script version : 3.2.2~ppa45~raring
boot-sav-extra version : 3.199~ppa2~raring
boot-repair is executed in live-session (Linux-Secure-Remix-64bit 20may2013, raring, Ubuntu, x86_64)
ls: cannot access /home/usr/.config: No such file or directory
CPU op-mode(s):        32-bit, 64-bit
file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- debian-installer/language=fr keyboard-configuration/layoutcode?=fr keyboard-configuration/variantcode?=oss

WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.


=================== os-prober:
/dev/sda2:Ubuntu 13.10 (13.10):Ubuntu:linux

=================== blkid:
/dev/loop0: TYPE="squashfs"
/dev/sda1: UUID="E58C-719F" TYPE="vfat"
/dev/sda2: UUID="4633b433-12ce-4b65-8af3-dcc2450db673" TYPE="ext4"
/dev/sda3: UUID="9ef4b505-0b72-49f9-b961-9143b038012e" TYPE="ext4"
/dev/sda4: UUID="a7fa36ad-fea8-4808-bbbc-820c953fb7ad" TYPE="swap"
/dev/sr0: LABEL="Linux Secure 13.04 64bit" TYPE="iso9660"


1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.


WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util sfdisk doesn't support GPT. Use GNU Parted.


WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.



=================== sda2/etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"




=================== sda2/etc/grub.d/ :
drwxr-xr-x  2 root root           4096 mars  22 20:26 grub.d
total 72
-rwxr-xr-x 1 root root  7850 oct.  10 17:48 00_header
-rwxr-xr-x 1 root root  5949 août  15  2013 05_debian_theme
-rwxr-xr-x 1 root root 11479 oct.  10 17:48 10_linux
-rwxr-xr-x 1 root root 10258 oct.  10 17:48 20_linux_xen
-rwxr-xr-x 1 root root  1798 juin  17  2013 20_memtest86+
-rwxr-xr-x 1 root root 11531 oct.  10 17:48 30_os-prober
-rwxr-xr-x 1 root root  1426 oct.  10 17:48 30_uefi-firmware
-rwxr-xr-x 1 root root   214 oct.  10 17:48 40_custom
-rwxr-xr-x 1 root root   216 oct.  10 17:48 41_custom
-rw-r--r-- 1 root root   483 oct.  10 17:48 README


/boot/efi detected in the fstab of sda2: UUID=E58C-719F   (sda1)
=================== UEFI/Legacy mode:
This live-session is not in EFI-mode.
SecureBoot maybe enabled.


=================== PARTITIONS & DISKS:
sda1  : sda,  not-sepboot,  no-grubenv  nogrub, no-docgrub, no-update-grub, 32, no-boot,  no-os,  is-correct-EFI, part-has-no-fstab,  part-has-no-fstab,  no-nt,  no-winload, no-recov-nor-hid, no-bmgr,  notwinboot, nopakmgr, nogrubinstall,  no---usr, part-has-no-fstab,  not-sep-usr,  standard, not-far,  /mnt/boot-sav/sda1.
sda2  : sda,  not-sepboot,  grubenv-ok  grub2,  signed grub-efi , update-grub,  64, with-boot,  is-os,  not--efi--part, fstab-without-boot, fstab-has-goodEFI,  no-nt,  no-winload, no-recov-nor-hid, no-bmgr,  notwinboot, apt-get,  grub-install, with--usr,  fstab-without-usr,  not-sep-usr,  standard, not-far,  /mnt/boot-sav/sda2.
sda3  : sda,  maybesepboot, no-grubenv  nogrub, no-docgrub, no-update-grub, 32, no-boot,  no-os,  not--efi--part, part-has-no-fstab,  part-has-no-fstab,  no-nt,  no-winload, no-recov-nor-hid, no-bmgr,  notwinboot, nopakmgr, nogrubinstall,  no---usr, part-has-no-fstab,  not-sep-usr,  standard, farbios,  /mnt/boot-sav/sda3.

sda : GPT,  no-BIOS_boot, has-correctEFI,   not-usb,  has-os, 2048 sectors * 512 bytes


=================== parted -l:

Model: ATA ST500DM002-1BD14 (scsi)
Disk /dev/sda: 500GB
Sector size (logical/physical): 512B/4096B
Partition Table: gpt

Number  Start   End     Size    File system     Name  Flags
1      82.8MB  505MB   423MB   fat32                 boot
2      505MB   48.5GB  48.0GB  ext4
3      48.5GB  109GB   60.5GB  ext4
4      109GB   118GB   8605MB  linux-swap(v1)



                                                                         
Error: /dev/sr0: unrecognised disk label

=================== parted -lm:

BYT;
/dev/sda:500GB:scsi:512:4096:gpt:ATA ST500DM002-1BD14;
1:82.8MB:505MB:423MB:fat32::boot;
2:505MB:48.5GB:48.0GB:ext4::;
3:48.5GB:109GB:60.5GB:ext4::;
4:109GB:118GB:8605MB:linux-swap(v1)::;


                                                                         
Error: /dev/sr0: unrecognised disk label


=================== mount:
/cow on / type overlayfs (rw)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
/dev/sr0 on /cdrom type iso9660 (ro,noatime)
/dev/loop0 on /rofs type squashfs (ro,noatime)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
gvfsd-fuse on /run/user/ubuntu/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=ubuntu)
/dev/sda1 on /mnt/boot-sav/sda1 type vfat (rw)
/dev/sda2 on /mnt/boot-sav/sda2 type ext4 (rw)
/dev/sda3 on /mnt/boot-sav/sda3 type ext4 (rw)


=================== ls:
/sys/block/sda (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda3 sda4 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered):  alarm ashmem autofs binder block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency disk dri dvd dvdrw ecryptfs fb0 fd full fuse hidraw0 hidraw1 hidraw2 hpet input kmsg kvm log lp0 mapper mcelog mei mem net network_latency network_throughput null oldmem parport0 port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sda4 sg0 sg1 shm snapshot snd sr0 stderr stdin stdout uinput urandom vga_arbiter vhost-net zero
ls /dev/mapper:  control
ls /mnt/boot-sav/sda1: /*/*/*/*

=================== hexdump -n512 -C /dev/sda1
00000000  eb 58 90 6d 6b 64 6f 73  66 73 00 00 02 08 20 00  |.X.mkdosfs.... .|
00000010  02 00 00 00 00 f8 00 00  3f 00 ff 00 00 00 00 00  |........?.......|
00000020  00 98 0c 00 28 03 00 00  00 00 00 00 02 00 00 00  |....(...........|
00000030  01 00 06 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000040  00 00 29 9f 71 8c e5 20  20 20 20 20 20 20 20 20  |..).q..         |
00000050  20 20 46 41 54 33 32 20  20 20 0e 1f be 77 7c ac  |  FAT32   ...w|.|
00000060  22 c0 74 0b 56 b4 0e bb  07 00 cd 10 5e eb f0 32  |".t.V.......^..2|
00000070  e4 cd 16 cd 19 eb fe 54  68 69 73 20 69 73 20 6e  |.......This is n|
00000080  6f 74 20 61 20 62 6f 6f  74 61 62 6c 65 20 64 69  |ot a bootable di|
00000090  73 6b 2e 20 20 50 6c 65  61 73 65 20 69 6e 73 65  |sk.  Please inse|
000000a0  72 74 20 61 20 62 6f 6f  74 61 62 6c 65 20 66 6c  |rt a bootable fl|
000000b0  6f 70 70 79 20 61 6e 64  0d 0a 70 72 65 73 73 20  |oppy and..press |
000000c0  61 6e 79 20 6b 65 79 20  74 6f 20 74 72 79 20 61  |any key to try a|
000000d0  67 61 69 6e 20 2e 2e 2e  20 0d 0a 00 00 00 00 00  |gain ... .......|
000000e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
000001f0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 55 aa  |..............U.|
00000200

WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.


=================== df -Th:

Filesystem     Type       Size  Used Avail Use% Mounted on
/cow           overlayfs  1.8G   27M  1.8G   2% /
udev           devtmpfs   1.8G   12K  1.8G   1% /dev
tmpfs          tmpfs      365M  860K  365M   1% /run
/dev/sr0       iso9660    782M  782M     0 100% /cdrom
/dev/loop0     squashfs   738M  738M     0 100% /rofs
none           tmpfs      4.0K     0  4.0K   0% /sys/fs/cgroup
tmpfs          tmpfs      1.8G  944K  1.8G   1% /tmp
none           tmpfs      5.0M     0  5.0M   0% /run/lock
none           tmpfs      1.8G   76K  1.8G   1% /run/shm
none           tmpfs      100M   24K  100M   1% /run/user
/dev/sda1      vfat       403M  3.3M  399M   1% /mnt/boot-sav/sda1
/dev/sda2      ext4        44G  4.1G   38G  10% /mnt/boot-sav/sda2
/dev/sda3      ext4        56G  138M   53G   1% /mnt/boot-sav/sda3

=================== fdisk -l:

Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x00000000

Device Boot      Start         End      Blocks   Id  System
/dev/sda1               1   976773167   488386583+  ee  GPT
Partition 1 does not start on physical sector boundary.


EFI détecté. Veuillez vérifier les options.
=================== Advice displayed in case of recommended repair
Le démarrage de votre ordinateur est en mode Legacy. Vous voudrez peut-être ré-essayer après l'avoir changé en mode EFI.
Alternativement, vous souhaiterez peut-être ré-essayer après avoir désactivé l'option [Partition /boot/efi séparée :].
Voulez-vous continuer ?
=================== Final advice in case of recommended repair
N'oubliez pas de régler votre BIOS pour qu'il amorce sur le fichier sda1/efi/.../grub*.efi !

=================== Default settings
Recommended-Repair
This setting would purge (in order to unsign-grub upgrade version) and reinstall the grub-efi of sda2, using the following options: upgrade-grub       sda1/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s    backup-and-rename-efi-files

=================== Settings chosen by the user
Boot-Info
This setting will not act on the MBR.



Aucun changement n'a été effectué sur cet ordinateur.

Download as text
 

Hors ligne

#12 14-04-2014 17:53:13

ridix
Membre
Lieu : chtimi
Distrib. : bureau et portable-WHEEZY +backports
Noyau : 3.2.0-4-amd64
(G)UI : XFCE
Inscription : 29-01-2014

Re : DUAL-BOOT Identifier une partition UEFI (gparted screenshot)

captnfab a écrit :

@ridix: je ne comprends pas pourquoi tu lui demandes de faire ça. Ici la partition UEFI est clairement /dev/sda1

Pour s'en assurer, il suffit de la monter et de vérifier qu'elle contient bien un dossier « EFI ».



c'était une solution que j'ai utilisée a plusieurs reprises

Hors ligne

#13 14-04-2014 17:53:33

captnfab
Admin-Girafe
Lieu : /dev/random
Distrib. : Debian
Noyau : Dur
(G)UI : gui gui, je zuis un doiseau
Inscription : 07-07-2008
Site Web

Re : DUAL-BOOT Identifier une partition UEFI (gparted screenshot)

@ridix: je vois bien ce que ça fait, mais tu ne vas pas demander de télécharger toute une iso juste pour obtenir quelques infos que l'on peut avoir en quelques lignes de commande smile

captnfab,
Association Debian-Facile, bépo.
TheDoctor: Your wish is my command… But be careful what you wish for.

Hors ligne

#14 14-04-2014 17:55:48

ridix
Membre
Lieu : chtimi
Distrib. : bureau et portable-WHEEZY +backports
Noyau : 3.2.0-4-amd64
(G)UI : XFCE
Inscription : 29-01-2014

Re : DUAL-BOOT Identifier une partition UEFI (gparted screenshot)

Non tu a raison a force de tester j'ai toute la panoplie chez moi

je voulais simplement l'indiquer .

Dernière modification par ridix (14-04-2014 17:56:56)

Hors ligne

#15 14-04-2014 18:10:30

captnfab
Admin-Girafe
Lieu : /dev/random
Distrib. : Debian
Noyau : Dur
(G)UI : gui gui, je zuis un doiseau
Inscription : 07-07-2008
Site Web

Re : DUAL-BOOT Identifier une partition UEFI (gparted screenshot)

Je serrais curieux de connaître la commande qui donne la sortie « Drive/Partition Info ».
Certainement gfdisk ou un truc comme ça ?

captnfab,
Association Debian-Facile, bépo.
TheDoctor: Your wish is my command… But be careful what you wish for.

Hors ligne

#16 14-04-2014 18:36:25

vinou33
Membre
Distrib. : Debian Jessie
Noyau : 3.13-1-amd64
(G)UI : GNOME 3
Inscription : 23-03-2014

Re : DUAL-BOOT Identifier une partition UEFI (gparted screenshot)

Suis perdu là smile. Comment je la monte la partition et comment je vérifie Oo ? Via le terminal linux dans gparted Oo ? Je le réécris, je suis perdu sad

Hors ligne

#17 14-04-2014 19:07:59

captnfab
Admin-Girafe
Lieu : /dev/random
Distrib. : Debian
Noyau : Dur
(G)UI : gui gui, je zuis un doiseau
Inscription : 07-07-2008
Site Web

Re : DUAL-BOOT Identifier une partition UEFI (gparted screenshot)

Tu n'as pas besoin de vérifier, c'est sûr, c'est la seule partition fat de ton système.

Si tu veux quand même vérifier, tu tapes ces trois commandes en root

mount /dev/sda1 /mnt
ls /mnt
umount /mnt


La deuxième devrait t'afficher « EFI ».


captnfab,
Association Debian-Facile, bépo.
TheDoctor: Your wish is my command… But be careful what you wish for.

Hors ligne

#18 14-04-2014 19:14:11

vinou33
Membre
Distrib. : Debian Jessie
Noyau : 3.13-1-amd64
(G)UI : GNOME 3
Inscription : 23-03-2014

Re : DUAL-BOOT Identifier une partition UEFI (gparted screenshot)

tiens, voilà, je l'ai fait rapidement avant que tu écrives par curiosité smile :


user@debian:~$ ls
user@debian:~$ mkdir toto
user@debian:~$ sudo mount /dev/sda1 toto
user@debian:~$ cd toto
user@debian:~/toto$ ls
BOOTSECT.BAK  db  dbx  EFI  KEK  PK
user@debian:~/toto$ cd EFI
user@debian:~/toto/EFI$ ls
ASUS  Boot  debian  Microsoft
user@debian:~/toto/EFI$ cd ../..
user@debian:~$ sudo umount /dev/sda1
user@debian:~$ sudo mount /dev/sda3 toto
NTFS signature is missing.
Failed to mount '/dev/sda3': Invalid argument
The device '/dev/sda3' doesn't seem to have a valid NTFS.
Maybe the wrong device is used? Or the whole disk instead of a
partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?
 



Merci pour vos aides wink. J'ai tenté de monté sda3, ce n'est pas passé en passant smile. Donc demain, je ferai la vérification ^^.

Hors ligne

#19 14-04-2014 20:07:18

vinou33
Membre
Distrib. : Debian Jessie
Noyau : 3.13-1-amd64
(G)UI : GNOME 3
Inscription : 23-03-2014

Re : DUAL-BOOT Identifier une partition UEFI (gparted screenshot)

Si je résume,  je ferai de l'espace libre avec gparted. Ensuite je fais l'installation et lors du choix des partitions et de leur taille, je crée les trois de base (/, /home, swap) et je spécifie en plus la partition uefi (/efi/boot). Mais autre petite question, est ce que les 3 partitions créées lors de l'installation seront bien interprétées comme le contenu d'une partition étendue ?

Dernière modification par vinou33 (14-04-2014 20:08:12)

Hors ligne

#20 14-04-2014 20:26:16

ridix
Membre
Lieu : chtimi
Distrib. : bureau et portable-WHEEZY +backports
Noyau : 3.2.0-4-amd64
(G)UI : XFCE
Inscription : 29-01-2014

Re : DUAL-BOOT Identifier une partition UEFI (gparted screenshot)

La table de partition dois être en GPT

Hors ligne

#21 14-04-2014 20:30:26

vinou33
Membre
Distrib. : Debian Jessie
Noyau : 3.13-1-amd64
(G)UI : GNOME 3
Inscription : 23-03-2014

Re : DUAL-BOOT Identifier une partition UEFI (gparted screenshot)

GPT ? Par table, tu entends la partition étendue ? Mais je déclare/crée ça où  et comment stp ?

Hors ligne

#22 14-04-2014 20:38:05

ridix
Membre
Lieu : chtimi
Distrib. : bureau et portable-WHEEZY +backports
Noyau : 3.2.0-4-amd64
(G)UI : XFCE
Inscription : 29-01-2014

Re : DUAL-BOOT Identifier une partition UEFI (gparted screenshot)

un disque GPT peut contenir 128 partitions principales
un disque ms dos 3partitions principales + une partition étendue

Mais je ne suis pas sur que nous parlons de la même chose ?

Mon ordinateur acheté sans os installé le HDD n'était pas formaté,

avec gparted , j'ai passé mon disque en GPT
j'ai crée au début du disque la partition EFI en fat 32

Puis j'ai crée aussi mes partitions , comme cela a l'installation tout est prêt

Dernière modification par ridix (14-04-2014 20:45:49)

Hors ligne

#23 14-04-2014 20:45:08

vinou33
Membre
Distrib. : Debian Jessie
Noyau : 3.13-1-amd64
(G)UI : GNOME 3
Inscription : 23-03-2014

Re : DUAL-BOOT Identifier une partition UEFI (gparted screenshot)

Mais la présence de l'uefi implique le GPT ? En fait, je parlais au cas où j'ai un bios qui soit en MBR au départ. De ce fait, si je crée une partition étendue et que les partitions de linux sont situées dans celle - ci,  cela m'éviterait ce risque de dépasser les 4 partitions (si MBR). Je préfère éviter de prendre des risques ^^.

Hors ligne

#24 14-04-2014 20:47:11

vinou33
Membre
Distrib. : Debian Jessie
Noyau : 3.13-1-amd64
(G)UI : GNOME 3
Inscription : 23-03-2014

Re : DUAL-BOOT Identifier une partition UEFI (gparted screenshot)

Bah tu ne faisais donc pas un dual boot avec l'uefi déjà existante. Chanceux, tu as trouvé un ordinateur sans os, no warranty issue ^^.

Dernière modification par vinou33 (14-04-2014 20:48:03)

Hors ligne

#25 14-04-2014 20:53:26

ridix
Membre
Lieu : chtimi
Distrib. : bureau et portable-WHEEZY +backports
Noyau : 3.2.0-4-amd64
(G)UI : XFCE
Inscription : 29-01-2014

Re : DUAL-BOOT Identifier une partition UEFI (gparted screenshot)

c'est possible de rester avec un partitionnement , comme avant
3partitions principales + une partition étendue
même avec un bios efi ,  tu ne crée pas de partitions Efi
tu installe a l'ancienne,a condition de ne pas avoir Windows 8 a coté

un sans os comme moi tu fait ce que tu veut

Hors ligne

Pied de page des forums