Command (m for help): p
 
Disk /dev/sdc: 4114 MB, 4114612224 bytes
127 heads, 62 sectors/track, 1020 cylinders
Units = cylinders of 7874 * 512 = 4031488 bytes
Disk identifier: 0x00000000
 
   Device Boot      Start         End      Blocks   Id  System
 
Command (m for help): n
Command action
   e   extended
   p   primary partition (1-4)
p
Partition number (1-4): 1
First cylinder (1-1020, default 1): 1
Last cylinder or +size or +sizeM or +sizeK (1-1020, default 1020): +700M
 
Command (m for help): n
Command action
   e   extended
   p   primary partition (1-4)
p
Partition number (1-4): 2
First cylinder (176-1020, default 176): 
Using default value 176
Last cylinder or +size or +sizeM or +sizeK (176-1020, default 1020): 
Using default value 1020
 
Command (m for help): p
 
Disk /dev/sdc: 4114 MB, 4114612224 bytes
127 heads, 62 sectors/track, 1020 cylinders
Units = cylinders of 7874 * 512 = 4031488 bytes
Disk identifier: 0x00000000
 
   Device Boot      Start         End      Blocks   Id  System
/dev/sdc1               1         175      688944   83  Linux
/dev/sdc2             176        1020     3326765   83  Linux
 
Command (m for help): t
Partition number (1-4): 1
Hex code (type L to list codes): 6
Changed system type of partition 1 to 6 (FAT16)
 
Command (m for help): a
Partition number (1-4): 1
 
Command (m for help): t
Partition number (1-4): 2
Hex code (type L to list codes): c
Changed system type of partition 2 to c (W95 FAT32 (LBA))
 
Command (m for help): p
 
Disk /dev/sdc: 4114 MB, 4114612224 bytes
127 heads, 62 sectors/track, 1020 cylinders
Units = cylinders of 7874 * 512 = 4031488 bytes
Disk identifier: 0x00000000
 
   Device Boot      Start         End      Blocks   Id  System
/dev/sdc1    *          1         175      688944    6  FAT16
/dev/sdc2             176        1020     3326765    c  W95 FAT32 (LBA)
 
Command (m for help): w
The partition table has been altered!
 
Calling ioctl() to re-read partition table.
 
WARNING: If you have created or modified any DOS 6.x
partitions, please see the fdisk manual page for additional
information.
Syncing disks.