smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.12.14-lp151.28.48-default] (SUSE RPM)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Hitachi Travelstar 5K500.B
Device Model: Hitachi HTS545032B9A300
Serial Number: 100214PBPC061DC8Y2UL
LU WWN Device Id: 5 000cca 5eec4102c
Firmware Version: PB3OC60F
User Capacity: 320 072 933 376 bytes [320 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Sun Jun 7 10:11:15 2020 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
chalu@linux-ietq:~> sudo smartctl --all /dev/sda
smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.12.14-lp151.28.48-default] (SUSE RPM)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Hitachi Travelstar 5K500.B
Device Model: Hitachi HTS545032B9A300
Serial Number: 100214PBPC061DC8Y2UL
LU WWN Device Id: 5 000cca 5eec4102c
Firmware Version: PB3OC60F
User Capacity: 320 072 933 376 bytes [320 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Sun Jun 7 10:11:44 2020 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 246) Self-test routine in progress...
60% of test remaining.
Total time to complete Offline
data collection: ( 645) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 106) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 062 Pre-fail Always - 0
2 Throughput_Performance 0x0005 100 100 040 Pre-fail Offline - 0
3 Spin_Up_Time 0x0007 141 141 033 Pre-fail Always - 2
4 Start_Stop_Count 0x0012 089 089 000 Old_age Always - 18467
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 040 Pre-fail Offline - 0
9 Power_On_Hours 0x0012 078 078 000 Old_age Always - 9868
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 097 097 000 Old_age Always - 6222
191 G-Sense_Error_Rate 0x000a 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 78
193 Load_Cycle_Count 0x0012 064 064 000 Old_age Always - 362059
194 Temperature_Celsius 0x0002 125 125 000 Old_age Always - 44 (Min/Max 11/48)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
223 Load_Retry_Count 0x000a 100 100 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 37 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 37 occurred at disk power-on lifetime: 5279 hours (219 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
10 51 01 b0 ea 42 40 Error: IDNF at LBA = 0x0042eab0 = 4385456
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 01 58 b0 ea 42 40 00 01:28:29.700 READ FPDMA QUEUED
61 80 50 d8 ad 60 40 00 01:28:29.700 WRITE FPDMA QUEUED
61 80 48 50 ba 61 40 00 01:28:29.700 WRITE FPDMA QUEUED
61 2e 40 b8 fc 61 40 00 01:28:29.700 WRITE FPDMA QUEUED
61 03 38 f8 d1 62 40 00 01:28:29.700 WRITE FPDMA QUEUED
Error 36 occurred at disk power-on lifetime: 5279 hours (219 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
10 51 01 b0 ea 42 40 Error: IDNF at LBA = 0x0042eab0 = 4385456
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 01 f0 b0 ea 42 40 00 01:28:29.600 READ FPDMA QUEUED
60 80 e8 b8 10 b4 40 00 01:28:29.600 READ FPDMA QUEUED
61 12 e0 38 ce 62 40 00 01:28:29.600 WRITE FPDMA QUEUED
61 0e d8 d8 d1 62 40 00 01:28:29.600 WRITE FPDMA QUEUED
61 03 d0 f8 d1 62 40 00 01:28:29.600 WRITE FPDMA QUEUED
Error 35 occurred at disk power-on lifetime: 5279 hours (219 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
10 51 01 b0 ea 42 40 Error: IDNF at LBA = 0x0042eab0 = 4385456
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 01 a0 b0 ea 42 40 00 01:28:29.500 READ FPDMA QUEUED
60 80 98 b8 10 b4 40 00 01:28:29.500 READ FPDMA QUEUED
2f 00 01 10 00 00 40 00 01:28:29.500 READ LOG EXT
60 01 90 b0 ea 42 40 00 01:28:29.400 READ FPDMA QUEUED
60 80 88 b8 10 b4 40 00 01:28:29.400 READ FPDMA QUEUED
Error 34 occurred at disk power-on lifetime: 5279 hours (219 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
10 51 01 b0 ea 42 40 Error: IDNF at LBA = 0x0042eab0 = 4385456
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 01 90 b0 ea 42 40 00 01:28:29.400 READ FPDMA QUEUED
60 80 88 b8 10 b4 40 00 01:28:29.400 READ FPDMA QUEUED
2f 00 01 10 00 00 40 00 01:28:29.400 READ LOG EXT
60 01 80 b0 ea 42 40 00 01:28:29.300 READ FPDMA QUEUED
60 80 78 b8 10 b4 40 00 01:28:29.300 READ FPDMA QUEUED
Error 33 occurred at disk power-on lifetime: 5279 hours (219 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
10 51 01 b0 ea 42 40 Error: IDNF at LBA = 0x0042eab0 = 4385456
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 01 80 b0 ea 42 40 00 01:28:29.300 READ FPDMA QUEUED
60 80 78 b8 10 b4 40 00 01:28:29.300 READ FPDMA QUEUED
2f 00 01 10 00 00 40 00 01:28:29.300 READ LOG EXT
60 01 70 b0 ea 42 40 00 01:28:29.200 READ FPDMA QUEUED
60 80 68 b8 10 b4 40 00 01:28:29.200 READ FPDMA QUEUED
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 9865 -
# 2 Short offline Completed without error 00% 9855 -
# 3 Short offline Completed without error 00% 9843 -
# 4 Short offline Completed without error 00% 9832 -
# 5 Short offline Completed without error 00% 9819 -
# 6 Short offline Completed without error 00% 9814 -
# 7 Short offline Completed without error 00% 9807 -
# 8 Short offline Completed without error 00% 9805 -
# 9 Short offline Completed without error 00% 9794 -
#10 Short offline Completed without error 00% 9783 -
#11 Short offline Completed without error 00% 9774 -
#12 Short offline Completed without error 00% 9767 -
#13 Short offline Completed without error 00% 9763 -
#14 Short offline Completed without error 00% 9757 -
#15 Short offline Completed without error 00% 9750 -
#16 Short offline Completed without error 00% 9747 -
#17 Short offline Completed without error 00% 9741 -
#18 Short offline Completed without error 00% 9731 -
#19 Short offline Completed without error 00% 9722 -
#20 Short offline Completed without error 00% 9708 -
#21 Short offline Completed without error 00% 9706 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.