sudo dmesg -l err
[ 0.553034] ACPI Error: Field [ABSD] at bit offset/length 144/16384 exceeds size of target Buffer (4208 bits) (20180810/dsopcode-201)
[ 0.558455] ACPI Error: Field [ABSD] at bit offset/length 144/16384 exceeds size of target Buffer (4208 bits) (20180810/dsopcode-201)
[ 0.558465] ACPI Error: AE_AML_BUFFER_LIMIT, Could not execute arguments for [ABSD] (BufferField) (20180810/nsinit-433)
[ 0.559736] ACPI Error: Field [ABSD] at bit offset/length 144/16384 exceeds size of target Buffer (4208 bits) (20180810/dsopcode-201)
[ 0.559745] ACPI Error: AE_AML_BUFFER_LIMIT, Could not execute arguments for [ABSD] (BufferField) (20180810/nsinit-433)
[ 3.219441] [drm:construct [amdgpu]] *ERROR* construct: Invalid Connector ObjectID from Adapter Service for connector index:2! type 0 expected 3
[ 10.443939] acer_wmi: Cannot enable Launch Manager mode
[ 12.030901] ath10k_pci 0000:02:00.0: firmware: failed to load ath10k/pre-cal-pci-0000:02:00.0.bin (-2)
[ 12.030910] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware
[ 12.030942] ath10k_pci 0000:02:00.0: firmware: failed to load ath10k/cal-pci-0000:02:00.0.bin (-2)
[ 14.026097] ath10k_pci 0000:02:00.0: Event logged [IO_PAGE_FAULT domain=0x0000 address=0x00000000ffc48b60 flags=0x0020]
[ 14.026121] ath10k_pci 0000:02:00.0: Event logged [IO_PAGE_FAULT domain=0x0000 address=0x00000000ffc48b10 flags=0x0020]
[ 14.026139] ath10k_pci 0000:02:00.0: Event logged [IO_PAGE_FAULT domain=0x0000 address=0x00000000ffc48b10 flags=0x0020]
[ 14.026155] ath10k_pci 0000:02:00.0: Event logged [IO_PAGE_FAULT domain=0x0000 address=0x00000000ffc48b20 flags=0x0020]
[ 14.026172] ath10k_pci 0000:02:00.0: Event logged [IO_PAGE_FAULT domain=0x0000 address=0x00000000ffc48b80 flags=0x0020]
[ 14.026188] ath10k_pci 0000:02:00.0: Event logged [IO_PAGE_FAULT domain=0x0000 address=0x00000000ffc48b70 flags=0x0020]
[ 14.026205] ath10k_pci 0000:02:00.0: Event logged [IO_PAGE_FAULT domain=0x0000 address=0x00000000ffc48b90 flags=0x0020]
[ 14.026221] ath10k_pci 0000:02:00.0: Event logged [IO_PAGE_FAULT domain=0x0000 address=0x00000000ffc48b60 flags=0x0020]
[ 14.026237] ath10k_pci 0000:02:00.0: Event logged [IO_PAGE_FAULT domain=0x0000 address=0x00000000ffc48b40 flags=0x0020]
[ 14.026253] ath10k_pci 0000:02:00.0: Event logged [IO_PAGE_FAULT domain=0x0000 address=0x00000000ffc48b30 flags=0x0020]
[ 14.026271] AMD-Vi: Event logged [IO_PAGE_FAULT device=02:00.0 domain=0x0000 address=0x00000000ffc48bc0 flags=0x0020]
[ 14.026289] AMD-Vi: Event logged [IO_PAGE_FAULT device=02:00.0 domain=0x0000 address=0x00000000ffc48b00 flags=0x0020]
[ 14.026304] AMD-Vi: Event logged [IO_PAGE_FAULT device=02:00.0 domain=0x0000 address=0x00000000ffc48be0 flags=0x0020]
[ 14.026320] AMD-Vi: Event logged [IO_PAGE_FAULT device=02:00.0 domain=0x0000 address=0x00000000ffc48ba0 flags=0x0020]
[ 14.026335] AMD-Vi: Event logged [IO_PAGE_FAULT device=02:00.0 domain=0x0000 address=0x00000000ffc48b00 flags=0x0020]
[ 14.026351] AMD-Vi: Event logged [IO_PAGE_FAULT device=02:00.0 domain=0x0000 address=0x00000000ffc48b90 flags=0x0020]
[ 14.137431] AMD-Vi: Event logged [IO_PAGE_FAULT device=02:00.0 domain=0x0000 address=0x00000000fff1f220 flags=0x0020]
[ 14.137450] AMD-Vi: Event logged [IO_PAGE_FAULT device=02:00.0 domain=0x0000 address=0x00000000fff1f1d0 flags=0x0020]
[ 14.137463] AMD-Vi: Event logged [IO_PAGE_FAULT device=02:00.0 domain=0x0000 address=0x00000000fff1f1e0 flags=0x0020]
[ 14.137476] AMD-Vi: Event logged [IO_PAGE_FAULT device=02:00.0 domain=0x0000 address=0x00000000fff1f1f0 flags=0x0020]
[ 32.142569] print_req_error: I/O error, dev sr0, sector 15043584
[ 32.180879] print_req_error: I/O error, dev sr0, sector 15043824
[ 32.259086] print_req_error: I/O error, dev sr0, sector 15043584
[ 32.259159] Buffer I/O error on dev sr0, logical block 1880448, async page read
[ 298.803255] print_req_error: I/O error, dev sr0, sector 15043584
[ 298.839466] print_req_error: I/O error, dev sr0, sector 15043824
[ 298.894633] print_req_error: I/O error, dev sr0, sector 15043584
[ 298.894641] Buffer I/O error on dev sr0, logical block 1880448, async page read
[ 390.751788] print_req_error: I/O error, dev sr0, sector 12422888
[ 390.759805] print_req_error: I/O error, dev sr0, sector 12423128
[ 390.762735] print_req_error: I/O error, dev sr0, sector 12423144
[ 390.852653] print_req_error: I/O error, dev sr0, sector 12423384
[ 390.899152] print_req_error: I/O error, dev sr0, sector 12422888
[ 390.899162] Buffer I/O error on dev sr0, logical block 3105722, async page read
[ 390.899169] Buffer I/O error on dev sr0, logical block 3105723, async page read
[ 589.607819] print_req_error: I/O error, dev sr0, sector 12265448
[ 589.607926] print_req_error: I/O error, dev sr0, sector 12529360
[ 589.622986] print_req_error: I/O error, dev sr0, sector 12265688
[ 589.623018] print_req_error: I/O error, dev sr0, sector 12529600
[ 589.623026] print_req_error: I/O error, dev sr0, sector 12265704
[ 589.623032] print_req_error: I/O error, dev sr0, sector 12265944
[ 589.623058] print_req_error: I/O error, dev sr0, sector 12265448
[ 589.623063] Buffer I/O error on dev sr0, logical block 3066362, async page read
[ 589.623074] print_req_error: I/O error, dev sr0, sector 12265452
[ 589.623077] Buffer I/O error on dev sr0, logical block 3066363, async page read
[ 589.623175] print_req_error: I/O error, dev sr0, sector 12529616
[ 589.623179] print_req_error: I/O error, dev sr0, sector 12529856
[ 589.623197] Buffer I/O error on dev sr0, logical block 3132340, async page read
[ 589.623199] Buffer I/O error on dev sr0, logical block 3132341, async page read
[ 589.627526] Buffer I/O error on dev sr0, logical block 3041446, async page read
[ 589.627543] Buffer I/O error on dev sr0, logical block 3041447, async page read
sudo smartctl -s on -a /dev/sda
smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.19.0-12-amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: TOSHIBA MQ04ABF100
Serial Number: X8T6PCVOT
LU WWN Device Id: 5 000039 8d240ca87
Firmware Version: JU001J
User Capacity: 1000204886016 bytes [1,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-3 T13/2161-D revision 5
SATA Version is: SATA 3.3, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Fri Nov 6 17:52:40 2020 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 24) The self-test routine was aborted by
the host.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 176) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0
3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 1240
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 3636
5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 350
10 Spin_Retry_Count 0x0033 172 100 030 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 468
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 166
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 11
193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 8496
194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 35 (Min/Max 15/48)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
220 Disk_Shift 0x0002 100 100 000 Old_age Always - 0
222 Loaded_Hours 0x0032 100 100 000 Old_age Always - 237
223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0
224 Load_Friction 0x0022 100 100 000 Old_age Always - 0
226 Load-in_Time 0x0026 100 100 000 Old_age Always - 263
240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Aborted by host 80% 350 -
# 2 Short offline Completed without error 00% 350 -
# 3 Extended offline Completed without error 00% 253 -
# 4 Extended offline Aborted by host 70% 247 -
# 5 Extended offline Aborted by host 70% 246 -
# 6 Short offline Completed without error 00% 244 -
# 7 Short captive Completed without error 00% 165 -
# 8 Short captive Completed without error 00% 165 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.