tyzef@debian:~$ su -
Mot de passe :
root@debian:~# dmesg --level=err,warn
[ 0.000000] secureboot: Secure boot could not be determined (mode 0)
[ 0.056781] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.906879] hpet_acpi_add: no address or irqs in _CRS
[ 0.907755] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.051228] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[ 1.051296] acpi PNP0C14:03: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[ 1.095176] r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.099664] nvme nvme0: missing or invalid SUBNQN field.
[ 1.105841] usb: port power management may be unreliable
[ 1.118453] i2c_hid i2c-ELAN0504:01: supply vdd not found, using dummy regulator
[ 1.118477] i2c_hid i2c-ELAN0504:01: supply vddl not found, using dummy regulator
[ 2.899907] systemd[1]: /lib/systemd/system/plymouth-start.service:16: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
[ 3.666485] vboxdrv: loading out-of-tree module taints kernel.
[ 3.801781] VBoxNetFlt: Successfully started.
[ 3.812390] VBoxNetAdp: Successfully started.
[ 4.007597] ath10k_pci 0000:02:00.0: firmware: failed to load ath10k/pre-cal-pci-0000:02:00.0.bin (-2)
[ 4.007599] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware
[ 4.007608] ath10k_pci 0000:02:00.0: firmware: failed to load ath10k/cal-pci-0000:02:00.0.bin (-2)
root@debian:~#
root@debian:~# journalctl -xb -p err
-- Journal begins at Thu 2021-01-21 15:23:30 +05, ends at Thu 2021-04-01 13:59:>
avril 01 13:57:23 debian systemd[1]: Failed to start VirtualBox Web Service.
░░ Subject: L'unité (unit) vboxweb.service a échoué
░░ Defined-By: systemd
░░ Support: https://www.debian.org/support
░░
░░ L'unité (unit) vboxweb.service a échoué, avec le résultat failed.
avril 01 13:57:23 debian kernel: VBoxNetFlt: Successfully started.
avril 01 13:57:23 debian kernel: VBoxNetAdp: Successfully started.
avril 01 13:57:23 debian kernel: ath10k_pci 0000:02:00.0: firmware: failed to l>
avril 01 13:57:23 debian kernel: firmware_class: See https://wiki.debian.org/Fi>
avril 01 13:57:23 debian kernel: ath10k_pci 0000:02:00.0: firmware: failed to l>
avril 01 13:57:24 debian bluetoothd[694]: profiles/sap/server.c:sap_server_regi>
avril 01 13:57:24 debian bluetoothd[694]: sap-server: Operation not permitted (>
avril 01 13:57:42 debian pulseaudio[807]: Doing resync
avril 01 13:57:42 debian pulseaudio[807]: Playback after capture (-55301), drop>
avril 01 13:57:43 debian systemd[787]: Failed to start Redshift display colour >
░░ Subject: L'unité (unit) UNIT a échoué
░░ Defined-By: systemd
░░ Support: https://www.debian.org/support
░░
░░ L'unité (unit) UNIT a échoué, avec le résultat failed.
lines 1-22/22 (END)...skipping...
-- Journal begins at Thu 2021-01-21 15:23:30 +05, ends at Thu 2021-04-01 13:59:34 +05. --
avril 01 13:57:23 debian systemd[1]: Failed to start VirtualBox Web Service.
░░ Subject: L'unité (unit) vboxweb.service a échoué
░░ Defined-By: systemd
░░ Support: https://www.debian.org/support
░░
░░ L'unité (unit) vboxweb.service a échoué, avec le résultat failed.
avril 01 13:57:23 debian kernel: VBoxNetFlt: Successfully started.
avril 01 13:57:23 debian kernel: VBoxNetAdp: Successfully started.
avril 01 13:57:23 debian kernel: ath10k_pci 0000:02:00.0: firmware: failed to load ath10k/pre-cal-pci-0000:02:00.0.bin (-2)
avril 01 13:57:23 debian kernel: firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware
avril 01 13:57:23 debian kernel: ath10k_pci 0000:02:00.0: firmware: failed to load ath10k/cal-pci-0000:02:00.0.bin (-2)
avril 01 13:57:24 debian bluetoothd[694]: profiles/sap/server.c:sap_server_register() Sap driver initialization failed.
avril 01 13:57:24 debian bluetoothd[694]: sap-server: Operation not permitted (1)
avril 01 13:57:42 debian pulseaudio[807]: Doing resync
avril 01 13:57:42 debian pulseaudio[807]: Playback after capture (-55301), drop sink 7116
avril 01 13:57:43 debian systemd[787]: Failed to start Redshift display colour temperature adjustment.
░░ Subject: L'unité (unit) UNIT a échoué
░░ Defined-By: systemd
░░ Support: https://www.debian.org/support
░░
░░ L'unité (unit) UNIT a échoué, avec le résultat failed.
~
root@debian:~# smartctl -a /dev/sda
smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.0-5-amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Momentus 7200.4
Device Model: ST9250410ASG
Serial Number: 5VG33F7F
LU WWN Device Id: 5 000c50 01f7dc2bf
Firmware Version: 0004SDM1
User Capacity: 250059350016 bytes [250 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Thu Apr 1 15:14:18 2021 +05
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x73) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 56) minutes.
Conveyance self-test routine
recommended polling time: ( 3) minutes.
SCT capabilities: (0x103f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 114 099 006 Pre-fail Always - 68257274
3 Spin_Up_Time 0x0003 099 098 085 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 097 097 020 Old_age Always - 3130
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 067 060 030 Pre-fail Always - 17203832548
9 Power_On_Hours 0x0032 097 097 000 Old_age Always - 2807
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 097 037 020 Old_age Always - 3105
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 081 081 000 Old_age Always - 19
188 Command_Timeout 0x0032 100 097 000 Old_age Always - 4295033388
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 060 044 045 Old_age Always In_the_past 40 (Min/Max 35/42 #4)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 66
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 234
193 Load_Cycle_Count 0x0032 061 061 000 Old_age Always - 78656
194 Temperature_Celsius 0x0022 040 056 000 Old_age Always - 40 (243 52 0 0 0)
195 Hardware_ECC_Recovered 0x001a 035 035 000 Old_age Always - 68257274
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 1676 (224 218 0)
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 127550718
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 1778030586
254 Free_Fall_Sensor 0x0032 001 001 000 Old_age Always - 13
SMART Error Log Version: 1
ATA Error Count: 19 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 19 occurred at disk power-on lifetime: 1581 hours (65 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 49 2d 60 00 Error: UNC at LBA = 0x00602d49 = 6303049
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 48 2d 60 40 00 00:01:22.003 READ FPDMA QUEUED
ef 02 00 00 00 00 00 00 00:01:21.937 SET FEATURES [Enable write cache]
00 00 00 00 00 00 00 ff 00:01:21.918 NOP [Abort queued commands]
60 00 08 48 2d 60 40 00 00:01:19.217 READ FPDMA QUEUED
ef 02 00 00 00 00 00 00 00:01:19.207 SET FEATURES [Enable write cache]
Error 18 occurred at disk power-on lifetime: 1581 hours (65 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 49 2d 60 00 Error: UNC at LBA = 0x00602d49 = 6303049
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 48 2d 60 40 00 00:01:19.217 READ FPDMA QUEUED
ef 02 00 00 00 00 00 00 00:01:19.207 SET FEATURES [Enable write cache]
00 00 00 00 00 00 00 ff 00:01:19.088 NOP [Abort queued commands]
60 00 08 48 2d 60 40 00 00:01:16.351 READ FPDMA QUEUED
ef 02 00 00 00 00 00 00 00:01:16.289 SET FEATURES [Enable write cache]
Error 17 occurred at disk power-on lifetime: 1581 hours (65 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 49 2d 60 00 Error: UNC at LBA = 0x00602d49 = 6303049
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 48 2d 60 40 00 00:01:16.351 READ FPDMA QUEUED
ef 02 00 00 00 00 00 00 00:01:16.289 SET FEATURES [Enable write cache]
00 00 00 00 00 00 00 ff 00:01:16.266 NOP [Abort queued commands]
60 00 08 48 2d 60 40 00 00:01:13.565 READ FPDMA QUEUED
ef 02 00 00 00 00 00 00 00:01:13.559 SET FEATURES [Enable write cache]
Error 16 occurred at disk power-on lifetime: 1581 hours (65 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 49 2d 60 00 Error: UNC at LBA = 0x00602d49 = 6303049
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 48 2d 60 40 00 00:01:13.565 READ FPDMA QUEUED
ef 02 00 00 00 00 00 00 00:01:13.559 SET FEATURES [Enable write cache]
00 00 00 00 00 00 00 ff 00:01:13.444 NOP [Abort queued commands]
60 00 08 48 2d 60 40 00 00:01:10.716 READ FPDMA QUEUED
ef 02 00 00 00 00 00 00 00:01:10.642 SET FEATURES [Enable write cache]
Error 15 occurred at disk power-on lifetime: 1581 hours (65 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 49 2d 60 00 Error: UNC at LBA = 0x00602d49 = 6303049
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 48 2d 60 40 00 00:01:10.716 READ FPDMA QUEUED
ef 02 00 00 00 00 00 00 00:01:10.642 SET FEATURES [Enable write cache]
00 00 00 00 00 00 00 ff 00:01:10.622 NOP [Abort queued commands]
60 00 08 48 2d 60 40 00 00:01:07.922 READ FPDMA QUEUED
ef 02 00 00 00 00 00 00 00:01:07.911 SET FEATURES [Enable write cache]
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 2807 -
# 2 Extended offline Completed without error 00% 2802 -
# 3 Short offline Completed without error 00% 43 -
# 4 Short offline Completed without error 00% 12 -
# 5 Short offline Completed without error 00% 2 -
# 6 Short offline Completed without error 00% 0 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
root@debian:~#