logo Debian Debian Debian-France Debian-Facile Debian-fr.org Forum-Debian.fr Debian ? Communautés logo inclusivité

Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#1 Re : Système » La commande shutdown » 26-05-2020 18:58:53

brutux
Qu'entends tu par "manière "standard" pour les save et ne neutralise pas les SIGTERM" ? Si j'envoie un kill $pidduprogramme il se ferme en ayant sauvé son fichier. Il réagira à priori donc bien au SIGTERM envoyé par shutdown.
D'après le lien de ton premier message le délais par défaut entre SIGTERM et SGKILL est de 90s mais ça semble ne concerne que les services.

#2 Re : Système » La commande shutdown » 26-05-2020 13:05:03

brutux
Je cherche à savoir si c'est le fonctionnement normal de la commande  shutdown de ne pas attendre la fin des processus avant d'éteindre une machine.

Dit comme ça c'est con car la réponse est forcement non mais comme c'est le cas chez moi je cherche à comprendre pourquoi. Du coup y à pas vraiment de souci (c'est obligé pour poster ?) juste de la  curiosité et l'envie de faire les choses avec les outils à dispo.

#3 Re : Système » La commande shutdown » 26-05-2020 10:30:41

brutux
La nuit portant conseil... j'utilse openbox et slim en partant d'une netinstall (raspbian lite pour le coup). Il est possible que j'ai omis une configuration de session quelque part et que celle-ci ne se ferme pas proprement !!?  Je cherche...

#4 Re : Système » La commande shutdown » 26-05-2020 07:57:08

brutux
Pkill, kill, killall, oui tout ceci fonctionne très bien. Le soft dispose même de sa propre commande bash pour être arrêté.

#5 Re : Système » La commande shutdown » 25-05-2020 23:27:34

brutux
Oui y a bien un sleep dans mon script et tout fonctionne bien, mais j'aurais préferé une solution plus "universelle" qu'un script perso. Avec sytemd je n'ai pas reussi à faire fonctionner une commande de sortie (= ExecStop ), avec init pareil. Au final j'en viens à penser qu'un service ne puisse bien fonctionner pour du gui.

Je m'étonne juste que shutdown n'attend pas la fin complète des processus, j'imagine que ça ferme la session x et tout ce qu'elle contient même si certains processus sont encore actifs. Ou alors si vraiment "y a tout ce qu'il faut dans les options de shutdown" comme le dit  saitama-san j'ai raté quelque chose.

#6 Système » La commande shutdown » 25-05-2020 18:28:26

brutux
Réponses : 11
Bonjours à tous !

Sur un Raspberry (Raspbian Buster) j’utilise un soft en graphique pour lire de la musique qui , quand on le ferme, sauvegarde l’etat de la liste de lecture dans un fichier, ça prend deux à trois secondes.
Je voulais que son extinction se fasse automatiquement au lancement de commande d’arrêt système. Après avoir essayé de lancer le soft comme un service ou de lancer un script à l’arrêt du système j’utilise finalement un script qui ferme mon programme puis lance un shutdown -h now.

J’aurai pensé que la commande shutdown utilisée basiquement dans un terminal ou autre aurait suffit, quel envoyait un signal d’arrêt à chaque processus et surtout qu’elle attendait que tout les processus soit arrêtés mais ça ne semble pas être les cas. Elle continue sont chemin sans attendre les retardataires !

Est-ce le fonctionnement normal de shutdown?  Y a t-il un moyen d’y remédier, ajout d’un délais ou autre ?

Et y a-t-il une autre façon prévu à cette effet pour arrêter un programme GUI (et lui en laisser le temps) en même temps que le système ? Comment auriez-vous fait ?

#7 Re : Matériel » nomodeset et i915 ? » 13-04-2020 00:00:02

brutux

naguam a écrit :

Pour en être sûr je rééssaierais un os que tu as déjà mis dessus et qui fonctionnais.


lol Je ne fais que ça depuis deux jours, Stretch, Buster, Bullseye,  niet !

Pas de màj non.Pas manuellement en tout cas, et si c'était en arrière plan y a pas de raison qu'il est redémarré tout seul.

#8 Re : Matériel » nomodeset et i915 ? » 12-04-2020 19:20:55

brutux
Et bien non ! Rien n'y fait, n'y l'un n'y l'autre n'y les deux !

#9 Re : Matériel » nomodeset et i915 ? » 12-04-2020 18:59:38

brutux
Ca fait 5 ans que je l'ai sur la même installation de Debian (avec maj version) et il s'est mit à deconner d'un coup, je n'étais pas devant l'ecran à ce moment là donc je peux rien dire de plus.
Un problème hardware ? oui c'est ma conclusion après 2 jours a bidouiller mais je comprends pas pourquoi ça fonctionne quand même un peu...
Ok merci de t'y être penché, je regarde de suite ce qu'il se passe avec ces arguments.

#10 Re : Matériel » nomodeset et i915 ? » 12-04-2020 18:31:36

brutux
Non pardon, ça passe le grub et ça coupe. j'ai juste le temps de voir les erreures du bios(qui ont toujours étées là) .

#11 Re : Matériel » nomodeset et i915 ? » 12-04-2020 17:54:06

brutux
Merci, ça s'éclaircit dans ma tête ! Oui, je sais bien que c'est pas un pc pour jouer smile  ça permet de juger rapidement des perfs avant/après.
Ca marche sous Ubuntu oui mais avec des perfs dégradées. J'ai bien essayé sous Debian de rajouter les firmware mais sans résultat.

Sans nomodeset rien ne boot (même avec X désactivé) mais avec, oui j'ai accès à une console.
Je veux bien un coup de main pour interpreter ça (les erreures de bios étaient presentes avant) :


$dmesg -l err,warn
[    0.000000] secureboot: Secure boot could not be determined (mode 0)
[    0.190927] You have booted with nomodeset. This means your GPU drivers are DISABLED
[    0.190928] Any video related functionality will be severely degraded, and you may not even be able to suspend the system properly
[    0.190928] Unless you actually understand what nomodeset does, you should reboot without enabling it
[    0.266145] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.266145] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.271183] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[    0.271183]  #3
[    0.319833] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.PEG0.PG00._ON.PEGS], AE_NOT_FOUND (20180810/psargs-330)
[    0.319842] ACPI Error: Method parse/execution failed \_SB.PCI0.PEG0.PG00._ON, AE_NOT_FOUND (20180810/psparse-516)
[    0.320175] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.PEG1.PG01._ON.PEGS], AE_NOT_FOUND (20180810/psargs-330)
[    0.320182] ACPI Error: Method parse/execution failed \_SB.PCI0.PEG1.PG01._ON, AE_NOT_FOUND (20180810/psparse-516)
[    0.320496] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.PEG2.PG02._ON.PEGS], AE_NOT_FOUND (20180810/psargs-330)
[    0.320502] ACPI Error: Method parse/execution failed \_SB.PCI0.PEG2.PG02._ON, AE_NOT_FOUND (20180810/psparse-516)
[    2.030905] r8169 0000:01:00.1: can't disable ASPM; OS doesn't have ASPM control
[    3.972407] tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x201] vs fed40080 f80
[    3.972513] tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x201] vs fed40080 f80
[    4.295440] uvcvideo 1-6:1.0: Entity type for entity Realtek Extended Controls Unit was not initialized!
[    4.295443] uvcvideo 1-6:1.0: Entity type for entity Extension 4 was not initialized!
[    4.295445] uvcvideo 1-6:1.0: Entity type for entity Processing 2 was not initialized!
[    4.295447] uvcvideo 1-6:1.0: Entity type for entity Camera 1 was not initialized!
[    4.501534] thermal thermal_zone2: failed to read out thermal zone (-61)
[   64.595206] hdaudio hdaudioC0D2: Unable to bind the codec

 




$ dmesg
[    0.000000] Linux version 4.19.0-8-amd64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Debian 4.19.98-1 (2020-01-26)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-8-amd64 root=UUID=26289c9c-eb2d-4c8a-9740-504be5f1c6e6 ro quiet nomodeset
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'compacted' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000084693fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000084694000-0x0000000084694fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000084695000-0x00000000846befff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000846bf000-0x0000000086debfff] usable
[    0.000000] BIOS-e820: [mem 0x0000000086dec000-0x0000000087732fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000087733000-0x0000000087812fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000087813000-0x0000000087babfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000087bac000-0x0000000087fa3fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000087fa4000-0x0000000087ffdfff] type 20
[    0.000000] BIOS-e820: [mem 0x0000000087ffe000-0x0000000087ffefff] usable
[    0.000000] BIOS-e820: [mem 0x0000000088000000-0x00000000880fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000173ffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.40 by American Megatrends
[    0.000000] efi:  ACPI=0x87917000  ACPI 2.0=0x87917000  SMBIOS=0x87ee9000  SMBIOS 3.0=0x87ee8000  ESRT=0x87eeae18
[    0.000000] secureboot: Secure boot could not be determined (mode 0)
[    0.000000] SMBIOS 3.0.0 present.
[    0.000000] DMI: Notebook                         W94_95_97JU/W94_95_97JU, BIOS 5.11 11/09/2017
[    0.000000] tsc: Detected 2100.000 MHz processor
[    0.005157] tsc: Detected 2112.000 MHz TSC
[    0.005157] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.005159] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.005167] last_pfn = 0x174000 max_arch_pfn = 0x400000000
[    0.005233] MTRR default type: write-back
[    0.005234] MTRR fixed ranges enabled:
[    0.005235]   00000-9FFFF write-back
[    0.005236]   A0000-BFFFF uncachable
[    0.005237]   C0000-FFFFF write-protect
[    0.005237] MTRR variable ranges enabled:
[    0.005239]   0 base 00C0000000 mask 7FC0000000 uncachable
[    0.005240]   1 base 00A0000000 mask 7FE0000000 uncachable
[    0.005241]   2 base 0090000000 mask 7FF0000000 uncachable
[    0.005241]   3 base 008C000000 mask 7FFC000000 uncachable
[    0.005242]   4 base 008A000000 mask 7FFE000000 uncachable
[    0.005243]   5 base 0089000000 mask 7FFF000000 uncachable
[    0.005244]   6 base 0088800000 mask 7FFF800000 uncachable
[    0.005244]   7 disabled
[    0.005245]   8 disabled
[    0.005245]   9 disabled
[    0.006060] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.006210] last_pfn = 0x87fff max_arch_pfn = 0x400000000
[    0.049921] esrt: Reserving ESRT space from 0x0000000087eeae18 to 0x0000000087eeae50.
[    0.049929] Using GB pages for direct mapping
[    0.049932] BRK [0x22401000, 0x22401fff] PGTABLE
[    0.049933] BRK [0x22402000, 0x22402fff] PGTABLE
[    0.049934] BRK [0x22403000, 0x22403fff] PGTABLE
[    0.049959] BRK [0x22404000, 0x22404fff] PGTABLE
[    0.049961] BRK [0x22405000, 0x22405fff] PGTABLE
[    0.050210] BRK [0x22406000, 0x22406fff] PGTABLE
[    0.050253] BRK [0x22407000, 0x22407fff] PGTABLE
[    0.050255] BRK [0x22408000, 0x22408fff] PGTABLE
[    0.050321] BRK [0x22409000, 0x22409fff] PGTABLE
[    0.050366] RAMDISK: [mem 0x33b11000-0x35d7ffff]
[    0.050372] ACPI: Early table checksum verification disabled
[    0.050375] ACPI: RSDP 0x0000000087917000 000024 (v02 ALASKA)
[    0.050378] ACPI: XSDT 0x0000000087917098 0000AC (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.050384] ACPI: FACP 0x000000008792FBB8 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
[    0.050389] ACPI: DSDT 0x00000000879171D8 0189D9 (v02 ALASKA A M I    01072009 INTL 20120913)
[    0.050392] ACPI: FACS 0x0000000087B7BF80 000040
[    0.050394] ACPI: APIC 0x000000008792FCC8 000084 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.050397] ACPI: FPDT 0x000000008792FD50 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.050399] ACPI: FIDT 0x000000008792FD98 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.050401] ACPI: MCFG 0x000000008792FE38 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.050404] ACPI: HPET 0x000000008792FE78 000038 (v01 ALASKA A M I    01072009 AMI. 0005000B)
[    0.050406] ACPI: SSDT 0x000000008792FEB0 000315 (v01 SataRe SataTabl 00001000 INTL 20120913)
[    0.050409] ACPI: SSDT 0x00000000879301C8 001100 (v01 INTEL  PtidDevc 00001000 INTL 20120913)
[    0.050412] ACPI: DBGP 0x00000000879312C8 000034 (v01 INTEL           00000000 MSFT 0000005F)
[    0.050414] ACPI: DBG2 0x0000000087931300 000054 (v00 INTEL           00000000 MSFT 0000005F)
[    0.050417] ACPI: SSDT 0x0000000087931358 003CDD (v02 SaSsdt SaSsdt   00003000 INTL 20120913)
[    0.050420] ACPI: UEFI 0x0000000087935038 000042 (v01                 00000000      00000000)
[    0.050422] ACPI: SSDT 0x0000000087935080 000E58 (v02 CpuRef CpuSsdt  00003000 INTL 20120913)
[    0.050425] ACPI: BGRT 0x0000000087935ED8 000038 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.050427] ACPI: DMAR 0x0000000087935F10 0000A8 (v01 INTEL  SKL      00000001 INTL 00000001)
[    0.050430] ACPI: TPM2 0x0000000087935FB8 000034 (v03        Tpm2Tabl 00000001 AMI  00000000)
[    0.050433] ACPI: ASF! 0x0000000087935FF0 0000A5 (v32 INTEL   HCG     00000001 TFSM 000F4240)
[    0.050443] ACPI: Local APIC address 0xfee00000
[    0.050631] No NUMA configuration found
[    0.050632] Faking a node at [mem 0x0000000000000000-0x0000000173ffffff]
[    0.050635] NODE_DATA(0) allocated [mem 0x173ff9000-0x173ffdfff]
[    0.050658] Zone ranges:
[    0.050659]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.050661]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.050662]   Normal   [mem 0x0000000100000000-0x0000000173ffffff]
[    0.050663]   Device   empty
[    0.050663] Movable zone start for each node
[    0.050664] Early memory node ranges
[    0.050665]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.050666]   node   0: [mem 0x0000000000059000-0x000000000009dfff]
[    0.050667]   node   0: [mem 0x0000000000100000-0x0000000084693fff]
[    0.050667]   node   0: [mem 0x00000000846bf000-0x0000000086debfff]
[    0.050668]   node   0: [mem 0x0000000087733000-0x0000000087812fff]
[    0.050668]   node   0: [mem 0x0000000087ffe000-0x0000000087ffefff]
[    0.050669]   node   0: [mem 0x0000000100000000-0x0000000173ffffff]
[    0.050672] Reserved but unavailable: 98 pages
[    0.050674] Initmem setup node 0 [mem 0x0000000000001000-0x0000000173ffffff]
[    0.050675] On node 0 totalpages: 1027646
[    0.050676]   DMA zone: 64 pages used for memmap
[    0.050677]   DMA zone: 22 pages reserved
[    0.050678]   DMA zone: 3996 pages, LIFO batch:0
[    0.050781]   DMA32 zone: 8571 pages used for memmap
[    0.050781]   DMA32 zone: 548514 pages, LIFO batch:63
[    0.066488]   Normal zone: 7424 pages used for memmap
[    0.066489]   Normal zone: 475136 pages, LIFO batch:63
[    0.078607] Reserving Intel graphics memory at [mem 0x89000000-0x8affffff]
[    0.078813] ACPI: PM-Timer IO Port: 0x1808
[    0.078815] ACPI: Local APIC address 0xfee00000
[    0.078821] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.078822] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.078822] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.078823] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.078850] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.078852] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.078853] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.078855] ACPI: IRQ0 used by override.
[    0.078856] ACPI: IRQ9 used by override.
[    0.078858] Using ACPI (MADT) for SMP configuration information
[    0.078859] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.078867] e820: update [mem 0x858a2000-0x85983fff] usable ==> reserved
[    0.078877] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.078898] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.078900] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.078901] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.078902] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.078904] PM: Registered nosave memory: [mem 0x84694000-0x84694fff]
[    0.078904] PM: Registered nosave memory: [mem 0x84695000-0x846befff]
[    0.078906] PM: Registered nosave memory: [mem 0x858a2000-0x85983fff]
[    0.078907] PM: Registered nosave memory: [mem 0x86dec000-0x87732fff]
[    0.078909] PM: Registered nosave memory: [mem 0x87813000-0x87babfff]
[    0.078909] PM: Registered nosave memory: [mem 0x87bac000-0x87fa3fff]
[    0.078910] PM: Registered nosave memory: [mem 0x87fa4000-0x87ffdfff]
[    0.078911] PM: Registered nosave memory: [mem 0x87fff000-0x87ffffff]
[    0.078912] PM: Registered nosave memory: [mem 0x88000000-0x880fffff]
[    0.078913] PM: Registered nosave memory: [mem 0x88100000-0x88ffffff]
[    0.078913] PM: Registered nosave memory: [mem 0x89000000-0x8affffff]
[    0.078914] PM: Registered nosave memory: [mem 0x8b000000-0xdfffffff]
[    0.078914] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.078915] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[    0.078915] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[    0.078916] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[    0.078916] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.078917] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[    0.078917] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.078918] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.078918] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.078920] [mem 0x8b000000-0xdfffffff] available for PCI devices
[    0.078921] Booting paravirtualized kernel on bare hardware
[    0.078925] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.190448] random: get_random_bytes called from start_kernel+0x93/0x52c with crng_init=0
[    0.190458] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.190800] percpu: Embedded 45 pages/cpu s144408 r8192 d31720 u524288
[    0.190810] pcpu-alloc: s144408 r8192 d31720 u524288 alloc=1*2097152
[    0.190811] pcpu-alloc: [0] 0 1 2 3
[    0.190835] Built 1 zonelists, mobility grouping on.  Total pages: 1011565
[    0.190836] Policy zone: Normal
[    0.190838] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-8-amd64 root=UUID=26289c9c-eb2d-4c8a-9740-504be5f1c6e6 ro quiet nomodeset
[    0.190927] You have booted with nomodeset. This means your GPU drivers are DISABLED
[    0.190928] Any video related functionality will be severely degraded, and you may not even be able to suspend the system properly
[    0.190928] Unless you actually understand what nomodeset does, you should reboot without enabling it
[    0.200103] Calgary: detecting Calgary via BIOS EBDA area
[    0.200105] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.220147] Memory: 3867692K/4110584K available (10252K kernel code, 1241K rwdata, 3320K rodata, 1592K init, 2276K bss, 242892K reserved, 0K cma-reserved)
[    0.220249] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.220256] Kernel/User page tables isolation: enabled
[    0.220310] ftrace: allocating 31847 entries in 125 pages
[    0.235315] rcu: Hierarchical RCU implementation.
[    0.235317] rcu:   RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[    0.235318] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.238439] NR_IRQS: 33024, nr_irqs: 1024, preallocated irqs: 16
[    0.238754] spurious 8259A interrupt: IRQ7.
[    0.238781] Console: colour dummy device 80x25
[    0.238786] console [tty0] enabled
[    0.238804] ACPI: Core revision 20180810
[    0.239140] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[    0.239170] hpet clockevent registered
[    0.239244] APIC: Switch to symmetric I/O mode setup
[    0.239246] DMAR: Host address width 39
[    0.239248] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.239253] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e
[    0.239254] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.239258] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[    0.239259] DMAR: RMRR base: 0x000000874d5000 end: 0x000000874f4fff
[    0.239260] DMAR: RMRR base: 0x00000088800000 end: 0x0000008affffff
[    0.239262] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.239263] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.239264] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[    0.239265] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[    0.241360] DMAR-IR: Enabled IRQ remapping in xapic mode
[    0.241361] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.245302] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.263181] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1e71785e5dd, max_idle_ns: 440795244814 ns
[    0.263197] Calibrating delay loop (skipped), value calculated using timer frequency.. 4224.00 BogoMIPS (lpj=8448000)
[    0.263199] pid_max: default: 32768 minimum: 301
[    0.263978] Security Framework initialized
[    0.263979] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.264000] AppArmor: AppArmor initialized
[    0.265240] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.265871] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.265898] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.265918] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.266145] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.266145] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.266163] CPU0: Thermal monitoring enabled (TM1)
[    0.266180] process: using mwait in idle threads
[    0.266183] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.266184] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.266185] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.266187] Spectre V2 : Mitigation: Full generic retpoline
[    0.266187] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.266188] Speculative Store Bypass: Vulnerable
[    0.266217] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.266502] Freeing SMP alternatives memory: 24K
[    0.270842] TSC deadline timer enabled
[    0.270846] smpboot: CPU0: Intel(R) Pentium(R) CPU 4405U @ 2.10GHz (family: 0x6, model: 0x4e, stepping: 0x3)
[    0.270963] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.270996] ... version:                4
[    0.270997] ... bit width:              48
[    0.270997] ... generic registers:      4
[    0.270998] ... value mask:             0000ffffffffffff
[    0.270998] ... max period:             00007fffffffffff
[    0.270999] ... fixed-purpose events:   3
[    0.271000] ... event mask:             000000070000000f
[    0.271045] rcu: Hierarchical SRCU implementation.
[    0.271183] random: crng done (trusting CPU's manufacturer)
[    0.271183] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.271183] smp: Bringing up secondary CPUs ...
[    0.271183] x86: Booting SMP configuration:
[    0.271183] .... node  #0, CPUs:      #1 #2
[    0.271183] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[    0.271183]  #3
[    0.271183] smp: Brought up 1 node, 4 CPUs
[    0.271183] smpboot: Max logical packages: 1
[    0.271183] smpboot: Total of 4 processors activated (16896.00 BogoMIPS)
[    0.271391] devtmpfs: initialized
[    0.271391] x86/mm: Memory block size: 128MB
[    0.271617] PM: Registering ACPI NVS region [mem 0x84694000-0x84694fff] (4096 bytes)
[    0.271617] PM: Registering ACPI NVS region [mem 0x87813000-0x87babfff] (3772416 bytes)
[    0.271617] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.271617] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.271617] pinctrl core: initialized pinctrl subsystem
[    0.271617] NET: Registered protocol family 16
[    0.271617] audit: initializing netlink subsys (disabled)
[    0.271617] audit: type=2000 audit(1586701859.032:1): state=initialized audit_enabled=0 res=1
[    0.271617] cpuidle: using governor ladder
[    0.271617] cpuidle: using governor menu
[    0.271617] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.271617] ACPI: bus type PCI registered
[    0.271617] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.271617] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.271617] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.271617] PCI: Using configuration type 1 for base access
[    0.271918] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.271918] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.271918] ACPI: Added _OSI(Module Device)
[    0.271918] ACPI: Added _OSI(Processor Device)
[    0.271918] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.271918] ACPI: Added _OSI(Processor Aggregator Device)
[    0.271918] ACPI: Added _OSI(Linux-Dell-Video)
[    0.271918] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.303332] ACPI: 5 ACPI AML tables successfully acquired and loaded
[    0.306433] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.309815] ACPI: Dynamic OEM Table Load:
[    0.309821] ACPI: SSDT 0xFFFF92E5AE5CC000 0005BB (v02 PmRef  Cpu0Ist  00003000 INTL 20120913)
[    0.310257] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[    0.311426] ACPI: Dynamic OEM Table Load:
[    0.311430] ACPI: SSDT 0xFFFF92E5AE629400 00037F (v02 PmRef  Cpu0Cst  00003001 INTL 20120913)
[    0.311826] ACPI: Dynamic OEM Table Load:
[    0.311829] ACPI: SSDT 0xFFFF92E5AE5F3300 00008E (v02 PmRef  Cpu0Hwp  00003000 INTL 20120913)
[    0.312116] ACPI: Dynamic OEM Table Load:
[    0.312119] ACPI: SSDT 0xFFFF92E5AE6B0A00 000130 (v02 PmRef  HwpLvt   00003000 INTL 20120913)
[    0.313002] ACPI: Dynamic OEM Table Load:
[    0.313008] ACPI: SSDT 0xFFFF92E5AE5CE000 0005AA (v02 PmRef  ApIst    00003000 INTL 20120913)
[    0.313619] ACPI: Dynamic OEM Table Load:
[    0.313622] ACPI: SSDT 0xFFFF92E5AE6B0600 000119 (v02 PmRef  ApHwp    00003000 INTL 20120913)
[    0.313998] ACPI: Dynamic OEM Table Load:
[    0.314001] ACPI: SSDT 0xFFFF92E5AE6B1600 000119 (v02 PmRef  ApCst    00003000 INTL 20120913)
[    0.316040] ACPI: EC: EC started
[    0.316041] ACPI: EC: interrupt blocked
[    0.316726] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
[    0.316728] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x50, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.316730] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions
[    0.316730] ACPI: Interpreter enabled
[    0.316775] ACPI: (supports S0 S3 S4 S5)
[    0.316777] ACPI: Using IOAPIC for interrupt routing
[    0.316818] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.317384] ACPI: Enabled 8 GPEs in block 00 to 7F
[    0.319789] ACPI: Power Resource [PG00] (on)
[    0.319833] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.PEG0.PG00._ON.PEGS], AE_NOT_FOUND (20180810/psargs-330)
[    0.319842] ACPI Error: Method parse/execution failed \_SB.PCI0.PEG0.PG00._ON, AE_NOT_FOUND (20180810/psparse-516)
[    0.320132] ACPI: Power Resource [PG01] (on)
[    0.320175] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.PEG1.PG01._ON.PEGS], AE_NOT_FOUND (20180810/psargs-330)
[    0.320182] ACPI Error: Method parse/execution failed \_SB.PCI0.PEG1.PG01._ON, AE_NOT_FOUND (20180810/psparse-516)
[    0.320454] ACPI: Power Resource [PG02] (on)
[    0.320496] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.PEG2.PG02._ON.PEGS], AE_NOT_FOUND (20180810/psargs-330)
[    0.320502] ACPI Error: Method parse/execution failed \_SB.PCI0.PEG2.PG02._ON, AE_NOT_FOUND (20180810/psparse-516)
[    0.336922] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.336927] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.336959] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.337490] PCI host bridge to bus 0000:00
[    0.337492] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.337493] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.337494] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.337495] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.337496] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[    0.337497] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.337498] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[    0.337499] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.337500] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.337501] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.337502] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.337503] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.337504] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.337505] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[    0.337506] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[    0.337507] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[    0.337508] pci_bus 0000:00: root bus resource [mem 0x8b000000-0xdfffffff window]
[    0.337509] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[    0.337510] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.337519] pci 0000:00:00.0: [8086:1904] type 00 class 0x060000
[    0.337647] pci 0000:00:02.0: [8086:1906] type 00 class 0x030000
[    0.337660] pci 0000:00:02.0: reg 0x10: [mem 0xde000000-0xdeffffff 64bit]
[    0.337666] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.337671] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.337687] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.337867] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
[    0.337892] pci 0000:00:14.0: reg 0x10: [mem 0xdf210000-0xdf21ffff 64bit]
[    0.337967] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.338123] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
[    0.338152] pci 0000:00:16.0: reg 0x10: [mem 0xdf22d000-0xdf22dfff 64bit]
[    0.338233] pci 0000:00:16.0: PME# supported from D3hot
[    0.338378] pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601
[    0.338399] pci 0000:00:17.0: reg 0x10: [mem 0xdf228000-0xdf229fff]
[    0.338407] pci 0000:00:17.0: reg 0x14: [mem 0xdf22c000-0xdf22c0ff]
[    0.338416] pci 0000:00:17.0: reg 0x18: [io  0xf090-0xf097]
[    0.338424] pci 0000:00:17.0: reg 0x1c: [io  0xf080-0xf083]
[    0.338432] pci 0000:00:17.0: reg 0x20: [io  0xf060-0xf07f]
[    0.338441] pci 0000:00:17.0: reg 0x24: [mem 0xdf22b000-0xdf22b7ff]
[    0.338487] pci 0000:00:17.0: PME# supported from D3hot
[    0.338629] pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400
[    0.338707] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.338867] pci 0000:00:1c.1: [8086:9d11] type 01 class 0x060400
[    0.338943] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.339129] pci 0000:00:1f.0: [8086:9d43] type 00 class 0x060100
[    0.339369] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
[    0.339385] pci 0000:00:1f.2: reg 0x10: [mem 0xdf224000-0xdf227fff]
[    0.339552] pci 0000:00:1f.3: [8086:9d70] type 00 class 0x040300
[    0.339580] pci 0000:00:1f.3: reg 0x10: [mem 0xdf220000-0xdf223fff 64bit]
[    0.339608] pci 0000:00:1f.3: reg 0x20: [mem 0xdf200000-0xdf20ffff 64bit]
[    0.339660] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.339854] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
[    0.339914] pci 0000:00:1f.4: reg 0x10: [mem 0xdf22a000-0xdf22a0ff 64bit]
[    0.339983] pci 0000:00:1f.4: reg 0x20: [io  0xf040-0xf05f]
[    0.340258] pci 0000:01:00.0: [10ec:5287] type 00 class 0xff0000
[    0.340288] pci 0000:01:00.0: reg 0x10: [mem 0xdf115000-0xdf115fff]
[    0.340335] pci 0000:01:00.0: reg 0x30: [mem 0xdf100000-0xdf10ffff pref]
[    0.340433] pci 0000:01:00.0: supports D1 D2
[    0.340434] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.340552] pci 0000:01:00.1: [10ec:8168] type 00 class 0x020000
[    0.340583] pci 0000:01:00.1: reg 0x10: [io  0xe000-0xe0ff]
[    0.340612] pci 0000:01:00.1: reg 0x18: [mem 0xdf114000-0xdf114fff 64bit]
[    0.340630] pci 0000:01:00.1: reg 0x20: [mem 0xdf110000-0xdf113fff 64bit]
[    0.340732] pci 0000:01:00.1: supports D1 D2
[    0.340733] pci 0000:01:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.340872] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.340875] pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
[    0.340878] pci 0000:00:1c.0:   bridge window [mem 0xdf100000-0xdf1fffff]
[    0.340979] pci 0000:02:00.0: [8086:095a] type 00 class 0x028000
[    0.341039] pci 0000:02:00.0: reg 0x10: [mem 0xdf000000-0xdf001fff 64bit]
[    0.341242] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.341448] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.341453] pci 0000:00:1c.1:   bridge window [mem 0xdf000000-0xdf0fffff]
[    0.342588] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.342638] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.342685] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.342731] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.342778] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.342824] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.342870] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.342916] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.343490] ACPI: EC: interrupt unblocked
[    0.343510] ACPI: EC: event unblocked
[    0.343522] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x50, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.343528] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
[    0.343635] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.343635] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.343635] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.343635] vgaarb: loaded
[    0.343635] pps_core: LinuxPPS API ver. 1 registered
[    0.343635] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.343635] PTP clock support registered
[    0.343635] EDAC MC: Ver: 3.0.0
[    0.343635] Registered efivars operations
[    0.343635] PCI: Using ACPI for IRQ routing
[    0.372008] PCI: pci_cache_line_size set to 64 bytes
[    0.372079] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.372080] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[    0.372081] e820: reserve RAM buffer [mem 0x84694000-0x87ffffff]
[    0.372083] e820: reserve RAM buffer [mem 0x858a2000-0x87ffffff]
[    0.372084] e820: reserve RAM buffer [mem 0x86dec000-0x87ffffff]
[    0.372085] e820: reserve RAM buffer [mem 0x87813000-0x87ffffff]
[    0.372087] e820: reserve RAM buffer [mem 0x87fff000-0x87ffffff]
[    0.372183] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.372183] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    0.373330] clocksource: Switched to clocksource tsc-early
[    0.381160] VFS: Disk quotas dquot_6.6.0
[    0.381176] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.381283] AppArmor: AppArmor Filesystem Enabled
[    0.381301] pnp: PnP ACPI init
[    0.381610] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.381612] system 00:00: [io  0xffff] has been reserved
[    0.381613] system 00:00: [io  0xffff] has been reserved
[    0.381615] system 00:00: [io  0xffff] has been reserved
[    0.381616] system 00:00: [io  0x1800-0x18fe] has been reserved
[    0.381617] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.381620] system 00:00: [io  0x3322-0x3323] has been reserved
[    0.381624] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.381726] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.381764] system 00:02: [io  0x1854-0x1857] has been reserved
[    0.381768] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.381794] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.381906] pnp 00:04: Plug and Play ACPI device, IDs SYN1217 PNP0f13 (active)
[    0.382137] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.382138] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.382139] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.382141] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[    0.382142] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.382143] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.382144] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.382146] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[    0.382147] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.382149] system 00:05: [mem 0xdffe0000-0xdfffffff] has been reserved
[    0.382152] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.382192] system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved
[    0.382193] system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved
[    0.382194] system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved
[    0.382196] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    0.382197] system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved
[    0.382198] system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved
[    0.382200] system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved
[    0.382202] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.382490] system 00:07: [io  0xff00-0xfffe] has been reserved
[    0.382492] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.383583] system 00:08: [mem 0xfe029000-0xfe029fff] has been reserved
[    0.383585] system 00:08: [mem 0xfe028000-0xfe028fff] has been reserved
[    0.383586] system 00:08: [mem 0xfdaf0000-0xfdafffff] has been reserved
[    0.383587] system 00:08: [mem 0xfdae0000-0xfdaeffff] has been reserved
[    0.383588] system 00:08: [mem 0xfdac0000-0xfdacffff] has been reserved
[    0.383592] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.384239] pnp: PnP ACPI: found 9 devices
[    0.389907] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.389929] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.389932] pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
[    0.389936] pci 0000:00:1c.0:   bridge window [mem 0xdf100000-0xdf1fffff]
[    0.389942] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.389946] pci 0000:00:1c.1:   bridge window [mem 0xdf000000-0xdf0fffff]
[    0.389953] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.389955] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.389956] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.389957] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.389958] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[    0.389959] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[    0.389960] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[    0.389961] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[    0.389962] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[    0.389963] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[    0.389964] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[    0.389965] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[    0.389966] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[    0.389967] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[    0.389968] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[    0.389969] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
[    0.389970] pci_bus 0000:00: resource 20 [mem 0x8b000000-0xdfffffff window]
[    0.389971] pci_bus 0000:00: resource 21 [mem 0xfd000000-0xfe7fffff window]
[    0.389972] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.389973] pci_bus 0000:01: resource 1 [mem 0xdf100000-0xdf1fffff]
[    0.389974] pci_bus 0000:02: resource 1 [mem 0xdf000000-0xdf0fffff]
[    0.390110] NET: Registered protocol family 2
[    0.390278] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes)
[    0.390295] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.390393] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.390512] TCP: Hash tables configured (established 32768 bind 32768)
[    0.390546] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.390564] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.390613] NET: Registered protocol family 1
[    0.390618] NET: Registered protocol family 44
[    0.390629] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.391366] PCI: CLS 0 bytes, default 64
[    0.391404] Unpacking initramfs...
[    1.052981] Freeing initrd memory: 35260K
[    1.067324] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.067326] software IO TLB: mapped [mem 0x7f978000-0x83978000] (64MB)
[    1.067358] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1e71785e5dd, max_idle_ns: 440795244814 ns
[    1.067374] clocksource: Switched to clocksource tsc
[    1.068088] Initialise system trusted keyrings
[    1.068098] Key type blacklist registered
[    1.068145] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[    1.069311] zbud: loaded
[    1.228228] Key type asymmetric registered
[    1.228230] Asymmetric key parser 'x509' registered
[    1.228244] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    1.228277] io scheduler noop registered
[    1.228278] io scheduler deadline registered
[    1.228316] io scheduler cfq registered (default)
[    1.228317] io scheduler mq-deadline registered
[    1.228807] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    1.228825] efifb: probing for efifb
[    1.228841] efifb: framebuffer at 0xc0000000, using 4160k, total 4160k
[    1.228843] efifb: mode is 1366x768x32, linelength=5504, pages=1
[    1.228843] efifb: scrolling: redraw
[    1.228844] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.231271] Console: switching to colour frame buffer device 170x48
[    1.233526] fb0: EFI VGA frame buffer device
[    1.233534] intel_idle: MWAIT substates: 0x11142120
[    1.233535] intel_idle: v0.4.1 model 0x4E
[    1.233731] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.234502] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.234981] Linux agpgart interface v0.103
[    1.235023] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    1.235024] AMD IOMMUv2 functionality not available on this system
[    1.235312] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:SYNM] at 0x60,0x64 irq 1,12
[    1.784115] i8042: Detected active multiplexing controller, rev 1.1
[    1.786814] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.786817] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.786840] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.786858] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.786874] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.787023] mousedev: PS/2 mouse device common for all mice
[    1.787067] rtc_cmos 00:01: RTC can wake from S4
[    1.787580] rtc_cmos 00:01: registered as rtc0
[    1.787593] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.787603] intel_pstate: Intel P-state driver initializing
[    1.787857] intel_pstate: HWP enabled
[    1.787881] ledtrig-cpu: registered to indicate activity on CPUs
[    1.788254] NET: Registered protocol family 10
[    1.790617] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.796459] Segment Routing with IPv6
[    1.796484] mip6: Mobile IPv6
[    1.796486] NET: Registered protocol family 17
[    1.796642] mpls_gso: MPLS GSO support
[    1.797187] mce: Using 8 MCE banks
[    1.797223] microcode: sig=0x406e3, pf=0x80, revision=0xba
[    1.797413] microcode: Microcode Update Driver: v2.2.
[    1.797425] sched_clock: Marking stable (1796945476, 462972)->(1806278499, -8870051)
[    1.797601] registered taskstats version 1
[    1.797602] Loading compiled-in X.509 certificates
[    1.834288] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[    1.834306] Loaded X.509 cert 'Debian Secure Boot Signer: 00a7468def'
[    1.834744] zswap: loaded using pool lzo/zbud
[    1.834856] AppArmor: AppArmor sha1 policy hashing enabled
[    1.835722] rtc_cmos 00:01: setting system clock to 2020-04-12 14:31:00 UTC (1586701860)
[    1.837058] Freeing unused kernel image memory: 1592K
[    1.871324] Write protecting the kernel read-only data: 16384k
[    1.872059] Freeing unused kernel image memory: 2028K
[    1.872349] Freeing unused kernel image memory: 776K
[    1.883014] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.883016] x86/mm: Checking user space page tables
[    1.892734] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.892736] Run /init as init process
[    1.962286] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[    1.962309] ACPI: Power Button [PWRB]
[    1.962369] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5
[    1.962385] ACPI: Sleep Button [SLPB]
[    1.962434] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input7
[    1.962439] ACPI: Lid Switch [LID0]
[    1.962485] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8
[    1.962491] ACPI: Power Button [PWRF]
[    1.979100] thermal LNXTHERM:00: registered as thermal_zone0
[    1.979102] ACPI: Thermal Zone [TZ0] (55 C)
[    1.988508] SCSI subsystem initialized
[    1.998884] rtsx_pci 0000:01:00.0: enabling device (0000 -> 0002)
[    2.004632] ACPI: bus type USB registered
[    2.004660] usbcore: registered new interface driver usbfs
[    2.004670] usbcore: registered new interface driver hub
[    2.004699] usbcore: registered new device driver usb
[    2.025220] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[    2.025263] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[    2.030905] r8169 0000:01:00.1: can't disable ASPM; OS doesn't have ASPM control
[    2.035440] libata version 3.00 loaded.
[    2.036451] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    2.036457] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    2.037531] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081109810
[    2.037536] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    2.037714] cryptd: max_cpu_qlen set to 1000
[    2.037751] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[    2.037752] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.037754] usb usb1: Product: xHCI Host Controller
[    2.037755] usb usb1: Manufacturer: Linux 4.19.0-8-amd64 xhci-hcd
[    2.037755] usb usb1: SerialNumber: 0000:00:14.0
[    2.037877] hub 1-0:1.0: USB hub found
[    2.037893] hub 1-0:1.0: 12 ports detected
[    2.038471] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    2.038474] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    2.038477] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[    2.038512] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
[    2.038514] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.038515] usb usb2: Product: xHCI Host Controller
[    2.038515] usb usb2: Manufacturer: Linux 4.19.0-8-amd64 xhci-hcd
[    2.038516] usb usb2: SerialNumber: 0000:00:14.0
[    2.038620] hub 2-0:1.0: USB hub found
[    2.038631] hub 2-0:1.0: 4 ports detected
[    2.043484] ahci 0000:00:17.0: version 3.0
[    2.043763] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    2.043766] ahci 0000:00:17.0: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
[    2.047404] libphy: r8169: probed
[    2.047751] r8169 0000:01:00.1 eth0: RTL8411, 80:fa:5b:22:76:47, XID 5c800800, IRQ 125
[    2.047753] r8169 0000:01:00.1 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    2.052625] SSE version of gcm_enc/dec engaged.
[    2.062086] scsi host0: ahci
[    2.062376] scsi host1: ahci
[    2.062465] ata1: SATA max UDMA/133 abar m2048@0xdf22b000 port 0xdf22b100 irq 124
[    2.062467] ata2: SATA max UDMA/133 abar m2048@0xdf22b000 port 0xdf22b180 irq 124
[    2.074065] r8169 0000:01:00.1 enp1s0f1: renamed from eth0
[    2.371233] usb 1-6: new high-speed USB device number 2 using xhci_hcd
[    2.377801] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.378331] ata2: SATA link down (SStatus 4 SControl 300)
[    2.379521] ata1.00: ATA-9: LDLC, KFS11004, max UDMA/133
[    2.379523] ata1.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 32), AA
[    2.388802] ata1.00: configured for UDMA/133
[    2.388809] ahci 0000:00:17.0: port does not support device sleep
[    2.389707] scsi 0:0:0:0: Direct-Access     ATA      LDLC             1004 PQ: 0 ANSI: 5
[    2.394558] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[    2.394566] sd 0:0:0:0: [sda] Write Protect is off
[    2.394568] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.394576] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.396150]  sda: sda1 sda2 sda3 sda4
[    2.396423] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.557088] usb 1-6: New USB device found, idVendor=04f2, idProduct=b551, bcdDevice=32.07
[    2.557090] usb 1-6: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    2.557091] usb 1-6: Product: Chicony USB 2.0 Camera
[    2.557092] usb 1-6: Manufacturer: Generic
[    2.557093] usb 1-6: SerialNumber: 200901010001
[    2.617291] PM: Image not found (code -22)
[    2.687235] usb 1-7: new full-speed USB device number 3 using xhci_hcd
[    2.837312] usb 1-7: New USB device found, idVendor=046d, idProduct=c52f, bcdDevice=22.01
[    2.837314] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.837315] usb 1-7: Product: USB Receiver
[    2.837316] usb 1-7: Manufacturer: Logitech
[    2.873108] hidraw: raw HID events driver (C) Jiri Kosina
[    2.878456] usbcore: registered new interface driver usbhid
[    2.878458] usbhid: USB HID core driver
[    2.965056] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:046D:C52F.0001/input/input11
[    2.965152] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-7/input0
[    2.965382] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.1/0003:046D:C52F.0002/input/input12
[    3.023324] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-7/input1
[    3.092301] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    3.232506] psmouse serio2: synaptics: queried max coordinates: x [..5712], y [..4872]
[    3.349281] psmouse serio2: synaptics: queried min coordinates: x [1336..], y [1122..]
[    3.349287] psmouse serio2: synaptics: Your touchpad (PNP: SYN1217 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
[    3.499325] psmouse serio2: synaptics: Touchpad model: 1, fw: 8.2, id: 0x1e2b1, caps: 0xf00123/0x840300/0x26800/0x0, board id: 3175, fw id: 2024995
[    3.514268] systemd[1]: Inserted module 'autofs4'
[    3.538762] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input10
[    3.557010] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    3.575427] systemd[1]: Detected architecture x86-64.
[    3.579760] systemd[1]: Set hostname to <w95>.
[    3.705764] systemd[1]: Listening on Journal Audit Socket.
[    3.705817] systemd[1]: Reached target Remote File Systems.
[    3.706925] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    3.706992] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    3.707105] systemd[1]: Listening on Journal Socket.
[    3.707969] systemd[1]: Starting Set the console keyboard layout...
[    3.708933] systemd[1]: Mounting Huge Pages File System...
[    3.737683] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[    3.894913] systemd-journald[252]: Received request to flush runtime journal from PID 1
[    3.926919] ACPI: AC Adapter [AC] (on-line)
[    3.972407] tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x201] vs fed40080 f80
[    3.972513] tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x201] vs fed40080 f80
[    3.973243] battery: ACPI: Battery Slot [BAT0] (battery absent)
[    4.009560] input: PC Speaker as /devices/platform/pcspkr/input/input17
[    4.013086] iTCO_vendor_support: vendor-support=0
[    4.016846] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    4.017378] iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[    4.017395] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    4.023667] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    4.028285] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[    4.034507] EFI Variables Facility v0.08 2004-May-17
[    4.069261] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[    4.069264] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    4.069264] RAPL PMU: hw unit of domain package 2^-14 Joules
[    4.069265] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    4.069266] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    4.069267] RAPL PMU: hw unit of domain psys 2^-14 Joules
[    4.071512] media: Linux media interface: v0.10
[    4.136797] pstore: Using compression: deflate
[    4.136812] pstore: Registered efi as persistent store backend
[    4.147203] videodev: Linux video capture interface: v2.00
[    4.180279] Intel(R) Wireless WiFi driver for Linux
[    4.180280] Copyright(c) 2003- 2015 Intel Corporation
[    4.180374] iwlwifi 0000:02:00.0: enabling device (0000 -> 0002)
[    4.196883] iwlwifi 0000:02:00.0: firmware: direct-loading firmware iwlwifi-7265D-29.ucode
[    4.197529] iwlwifi 0000:02:00.0: loaded firmware version 29.1044073957.0 op_mode iwlmvm
[    4.250479] uvcvideo: Found UVC 1.00 device Chicony USB 2.0 Camera (04f2:b551)
[    4.295440] uvcvideo 1-6:1.0: Entity type for entity Realtek Extended Controls Unit was not initialized!
[    4.295443] uvcvideo 1-6:1.0: Entity type for entity Extension 4 was not initialized!
[    4.295445] uvcvideo 1-6:1.0: Entity type for entity Processing 2 was not initialized!
[    4.295447] uvcvideo 1-6:1.0: Entity type for entity Camera 1 was not initialized!
[    4.295681] input: Chicony USB 2.0 Camera: Chicony as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/input/input18
[    4.295897] usbcore: registered new interface driver uvcvideo
[    4.295898] USB Video Class driver (1.1.1)
[    4.323102] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[    4.397386] Adding 2946044k swap on /dev/sda3.  Priority:-2 extents:1 across:2946044k SSFS
[    4.400035] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[    4.409647] iwlwifi 0000:02:00.0: Detected Intel(R) Wireless N 7265, REV=0x210
[    4.427665] iwlwifi 0000:02:00.0: base HW address: 60:57:18:ec:73:7c
[    4.495501] intel_rapl: Found RAPL domain package
[    4.495504] intel_rapl: Found RAPL domain core
[    4.495505] intel_rapl: Found RAPL domain uncore
[    4.495507] intel_rapl: Found RAPL domain dram
[    4.501161] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[    4.501534] thermal thermal_zone2: failed to read out thermal zone (-61)
[    4.504734] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
[    4.550655] audit: type=1400 audit(1586701863.208:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=444 comm="apparmor_parser"
[    4.552065] audit: type=1400 audit(1586701863.212:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=445 comm="apparmor_parser"
[    4.552071] audit: type=1400 audit(1586701863.212:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=445 comm="apparmor_parser"
[    4.552074] audit: type=1400 audit(1586701863.212:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=445 comm="apparmor_parser"
[    4.552128] audit: type=1400 audit(1586701863.212:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=446 comm="apparmor_parser"
[    4.562952] audit: type=1400 audit(1586701863.220:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=448 comm="apparmor_parser"
[    4.562959] audit: type=1400 audit(1586701863.220:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=448 comm="apparmor_parser"
[    4.563052] audit: type=1400 audit(1586701863.220:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session" pid=450 comm="apparmor_parser"
[    4.563055] audit: type=1400 audit(1586701863.220:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session//chromium" pid=450 comm="apparmor_parser"
[    5.091040] NET: Registered protocol family 3
[    5.103900] NET: Registered protocol family 5
[    5.231093] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   10.044547] r8169 0000:01:00.1: firmware: direct-loading firmware rtl_nic/rtl8411-2.fw
[   10.044800] Generic PHY r8169-101:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=r8169-101:00, irq=IGNORE)
[   10.157170] IPv6: ADDRCONF(NETDEV_UP): enp1s0f1: link is not ready
[   10.157378] r8169 0000:01:00.1 enp1s0f1: Link is Down
[   11.757385] r8169 0000:01:00.1 enp1s0f1: Link is Up - 100Mbps/Full - flow control off
[   11.757400] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0f1: link becomes ready
[   12.390219] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   12.557818] Generic PHY r8169-101:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=r8169-101:00, irq=IGNORE)
[   12.689394] IPv6: ADDRCONF(NETDEV_UP): enp1s0f1: link is not ready
[   12.817096] Generic PHY r8169-101:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=r8169-101:00, irq=IGNORE)
[   12.949734] IPv6: ADDRCONF(NETDEV_UP): enp1s0f1: link is not ready
[   14.499876] r8169 0000:01:00.1 enp1s0f1: Link is Up - 100Mbps/Full - flow control off
[   14.499890] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0f1: link becomes ready
[   64.553958] snd_hda_intel 0000:00:1f.3: couldn't bind with audio component
[   64.579942] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   64.579945] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   64.579946] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[   64.579947] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   64.579948] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   64.579949] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[   64.579950] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[   64.594844] snd_hda_codec_hdmi hdaudioC0D2: No i915 binding for Intel HDMI/DP codec
[   64.595206] hdaudio hdaudioC0D2: Unable to bind the codec
[   64.595434] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
[   64.596179] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
[   64.596278] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21
[  930.485347] usb 1-1: new high-speed USB device number 4 using xhci_hcd
[  930.636724] usb 1-1: New USB device found, idVendor=1516, idProduct=8628, bcdDevice= 2.00
[  930.636729] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  930.636731] usb 1-1: Product: FlashDisk
[  930.636734] usb 1-1: Manufacturer: USB2.0
[  930.636736] usb 1-1: SerialNumber: 00000000000000000CD251D0
[  930.662995] usb-storage 1-1:1.0: USB Mass Storage device detected
[  930.663124] scsi host2: usb-storage 1-1:1.0
[  930.663234] usbcore: registered new interface driver usb-storage
[  930.666555] usbcore: registered new interface driver uas
[  931.690309] scsi 2:0:0:0: Direct-Access     USB2.0   FlashDisk        1.00 PQ: 0 ANSI: 2
[  931.690946] sd 2:0:0:0: Attached scsi generic sg1 type 0
[  931.691517] sd 2:0:0:0: [sdb] 998656 512-byte logical blocks: (511 MB/488 MiB)
[  931.691716] sd 2:0:0:0: [sdb] Write Protect is off
[  931.691722] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
[  931.691902] sd 2:0:0:0: [sdb] No Caching mode page found
[  931.691989] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[  931.697424]  sdb: sdb1
[  931.698497] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 1115.147061] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 1184.713542] usb 1-1: USB disconnect, device number 4
[ 5165.874780] usb 1-3: new high-speed USB device number 5 using xhci_hcd
[ 5166.026058] usb 1-3: New USB device found, idVendor=1516, idProduct=8628, bcdDevice= 2.00
[ 5166.026063] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5166.026066] usb 1-3: Product: FlashDisk
[ 5166.026068] usb 1-3: Manufacturer: USB2.0
[ 5166.026070] usb 1-3: SerialNumber: 00000000000000000CD251D0
[ 5166.027631] usb-storage 1-3:1.0: USB Mass Storage device detected
[ 5166.027984] scsi host2: usb-storage 1-3:1.0
[ 5166.467933] r8169 0000:01:00.1 enp1s0f1: Link is Down
[ 5167.039618] scsi 2:0:0:0: Direct-Access     USB2.0   FlashDisk        1.00 PQ: 0 ANSI: 2
[ 5167.040250] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 5167.043085] sd 2:0:0:0: [sdb] 998656 512-byte logical blocks: (511 MB/488 MiB)
[ 5167.043299] sd 2:0:0:0: [sdb] Write Protect is off
[ 5167.043304] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 5167.043512] sd 2:0:0:0: [sdb] No Caching mode page found
[ 5167.045914] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 5167.049505]  sdb: sdb1
[ 5167.050585] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 5168.073272] r8169 0000:01:00.1 enp1s0f1: Link is Up - 100Mbps/Full - flow control off
[ 5180.575332] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 5181.896957] r8169 0000:01:00.1 enp1s0f1: Link is Down
[ 5183.516004] r8169 0000:01:00.1 enp1s0f1: Link is Up - 100Mbps/Full - flow control off
[ 5185.592162] r8169 0000:01:00.1 enp1s0f1: Link is Down
[ 5187.339563] r8169 0000:01:00.1 enp1s0f1: Link is Up - 100Mbps/Full - flow control off
[ 5188.542946] r8169 0000:01:00.1 enp1s0f1: Link is Down
[ 5189.965117] Generic PHY r8169-101:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=r8169-101:00, irq=IGNORE)
[ 5190.097207] IPv6: ADDRCONF(NETDEV_UP): enp1s0f1: link is not ready
[ 5191.341540] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 5191.518988] Generic PHY r8169-101:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=r8169-101:00, irq=IGNORE)
[ 5191.653202] IPv6: ADDRCONF(NETDEV_UP): enp1s0f1: link is not ready
[ 5194.761579] r8169 0000:01:00.1 enp1s0f1: Link is Up - 100Mbps/Full - flow control off
[ 5194.761594] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0f1: link becomes ready
[ 5196.426167] r8169 0000:01:00.1 enp1s0f1: Link is Down
[ 5198.029451] r8169 0000:01:00.1 enp1s0f1: Link is Up - 100Mbps/Full - flow control off
 

#12 Matériel » nomodeset et i915 ? » 12-04-2020 16:31:23

brutux
Réponses : 9
Bonjour, J’ai retrouvé mon pc portable en train de rebooter en boucle, il plantait après le grub sans afficher de message d’erreur. Après avoir vérifié côté hardware, avoir testé des livecd/usb qui ne démarraient pas plus j’ai tenté une réinstallation (debian stable) qui à aboutit sans souci mais le problème est revenu au reboot.
Finalement avec l’argument nomodese ajouté au lancement du noyau la situation s’est débloquée, le système se lance mais  X  plante et donc ...écran noir. Du coup avec nomodeset j’ai pu lancer un liveCD d’Ubuntu et une installation. Là, sous Ubuntu, tout semble fonctionner mais je pense que le driver graphique (=I915 )  n’est pas utilisé, les jeux habituellement fluides sont injouables.

Je n’arrive pas bien à saisir la portée de nomodeset, est-il possible de l’utiliser conjointement au driver Intel et retrouver un système fonctionnel sous Debian  ?
Ce pc à manqué de fiabilité depuis le premier jours. Comme cela lui est arriver sans raison apparente (tout en ayant eu 2 retours à la normale quand je bidouillais la partie hardware) , j’imagine bien un problème matériel. Est-ce possible en l’état ?

Merci aux âmes charitables qui se pencheront sur mon problème.

Clevo W950JU /  Skylake Pentium 4405U – intel HD Graphics 510 / 4go Ram
(Habituellement) sous Debian Buster 4.19.0-8-amd64

Le log X d'une installation Debian toute fraîche. Mes essaisss de suppression de fichiers de config, config perso, X -configure, dpkg-reconfigure.., n'ont rien donnés .


[     6.785] X.Org X Server 1.20.4X Protocol Version 11, Revision 0
[     6.785] Build Operating System: Linux 4.9.0-8-amd64 x86_64 Debian
[     6.785] Current Operating System: Linux w95 4.19.0-8-amd64 #1 SMP Debian 4.19.98-1 (2020-01-26) x86_64
[     6.785] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-8-amd64 root=UUID=26289c9c-eb2d-4c8a-9740-504be5f1c6e6 ro quiet nomodeset
[     6.785] Build Date: 05 March 2019  08:11:12PM
[     6.785] xorg-server 2:1.20.4-1 (https://www.debian.org/support)
[     6.785] Current version of pixman: 0.36.0
[     6.785]  Before reporting problems, check http://wiki.x.org  to make sure that you have the latest version.
[     6.785] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational,  (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     6.785] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Apr 12 16:31:05 2020
[     6.785] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     6.786] (==) No Layout section.  Using the first Screen section.
[     6.786] (==) No screen section available. Using defaults.
[     6.786] (**) |-->Screen "Default Screen Section" (0)
[     6.786] (**) |   |-->Monitor "<default monitor>"
[     6.786] (==) No monitor specified for screen "Default Screen Section".
  Using a default monitor configuration.
[     6.786] (==) Automatically adding devices
[     6.786] (==) Automatically enabling devices
[     6.786] (==) Automatically adding GPU devices
[     6.786] (==) Max clients allowed: 256, resource mask: 0x1fffff
[     6.786] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[     6.786]  Entry deleted from font path.
[     6.786] (==) FontPath set to:
  /usr/share/fonts/X11/misc,
  /usr/share/fonts/X11/100dpi/:unscaled,
  /usr/share/fonts/X11/75dpi/:unscaled,
  /usr/share/fonts/X11/Type1,
  /usr/share/fonts/X11/100dpi,
  /usr/share/fonts/X11/75dpi,
  built-ins
[     6.786] (==) ModulePath set to "/usr/lib/xorg/modules"
[     6.787] (II) The server relies on udev to provide the list of input devices.
  If no devices become available, reconfigure udev or disable AutoAddDevices.
[     6.787] (II) Loader magic: 0x55d6c8effe20
[     6.787] (II) Module ABI versions:
[     6.787]  X.Org ANSI C Emulation: 0.4
[     6.787]  X.Org Video Driver: 24.0
[     6.787]  X.Org XInput driver : 24.1
[     6.787]  X.Org Server Extension : 10.0
[     6.788] (++) using VT number 7
[     6.788] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[     6.791] (--) PCI:*(0@0:2:0) 8086:1906:1558:0941 rev 7, Mem @ 0xde000000/16777216, 0xc0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[     6.791] (II) LoadModule: "glx"
[     6.791] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     6.793] (II) Module glx: vendor="X.Org Foundation"
[     6.793]  compiled for 1.20.4, module version = 1.0.0
[     6.793]  ABI class: X.Org Server Extension, version 10.0
[     6.793] (==) Matched modesetting as autoconfigured driver 0
[     6.793] (==) Matched fbdev as autoconfigured driver 1
[     6.793] (==) Matched vesa as autoconfigured driver 2
[     6.793] (==) Assigned the driver to the xf86ConfigLayout
[     6.793] (II) LoadModule: "modesetting"
[     6.793] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[     6.793] (II) Module modesetting: vendor="X.Org Foundation"
[     6.793]  compiled for 1.20.4, module version = 1.20.4
[     6.793]  Module class: X.Org Video Driver
[     6.793]  ABI class: X.Org Video Driver, version 24.0
[     6.793] (II) LoadModule: "fbdev"
[     6.793] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[     6.793] (II) Module fbdev: vendor="X.Org Foundation"
[     6.793]  compiled for 1.20.0, module version = 0.5.0
[     6.793]  Module class: X.Org Video Driver
[     6.793]  ABI class: X.Org Video Driver, version 24.0
[     6.793] (II) LoadModule: "vesa"
[     6.793] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[     6.794] (II) Module vesa: vendor="X.Org Foundation"
[     6.794]  compiled for 1.20.1, module version = 2.4.0
[     6.794]  Module class: X.Org Video Driver
[     6.794]  ABI class: X.Org Video Driver, version 24.0
[     6.794] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[     6.794] (II) FBDEV: driver for framebuffer: fbdev
[     6.794] (II) VESA: driver for VESA chipsets: vesa
[     6.794] (EE) open /dev/dri/card0: No such file or directory
[     6.794] (WW) Falling back to old probe method for modesetting
[     6.794] (EE) open /dev/dri/card0: No such file or directory
[     6.794] (II) Loading sub module "fbdevhw"
[     6.794] (II) LoadModule: "fbdevhw"
[     6.794] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[     6.794] (II) Module fbdevhw: vendor="X.Org Foundation"
[     6.794]  compiled for 1.20.4, module version = 0.0.2
[     6.794]  ABI class: X.Org Video Driver, version 24.0
[     6.795] (EE) Unable to find a valid framebuffer device
[     6.795] (WW) Falling back to old probe method for fbdev
[     6.795] (II) Loading sub module "fbdevhw"
[     6.795] (II) LoadModule: "fbdevhw"
[     6.795] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[     6.795] (II) Module fbdevhw: vendor="X.Org Foundation"
[     6.795]  compiled for 1.20.4, module version = 0.0.2
[     6.795]  ABI class: X.Org Video Driver, version 24.0
[     6.795] (II) FBDEV(2): using default device
[     6.795] (EE) Screen 0 deleted because of no matching config section.
[     6.795] (II) UnloadModule: "modesetting"
[     6.795] (EE) Screen 0 deleted because of no matching config section.
[     6.795] (II) UnloadModule: "fbdev"
[     6.795] (II) UnloadSubModule: "fbdevhw"
[     6.795] (EE)
Fatal server error:
[     6.795] (EE) Cannot run in framebuffer mode. Please specify busIDs        for all framebuffer devices
[     6.795] (EE)
[     6.795] (EE)
Please consult the The X.Org Foundation support
   at http://wiki.x.org
 for help.
[     6.795] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[     6.795] (EE)
[     6.799] (EE) Server terminated with error (1). Closing log file.




lspci -vnn | grep -i VGA -A 12

     00:02.0 VGA compatible controller [0300]: Intel Corporation HD Graphics 510 [8086:1906] (rev 07) (prog-if 00 [VGA controller])
  Subsystem: CLEVO/KAPOK Computer HD Graphics 510 [1558:0941]
  Flags: bus master, fast devsel, latency 0, IRQ 255
  Memory at de000000 (64-bit, non-prefetchable) [size=16M]
  Memory at c0000000 (64-bit, prefetchable) [size=256M]
  I/O ports at f000 [size=64]
  [virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
  Capabilities: [40] Vendor Specific Information: Len=0c <?>
  Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00
  Capabilities: [ac] MSI: Enable- Count=1/1 Maskable- 64bit-
  Capabilities: [d0] Power Management version 2
  Capabilities: [100] Process Address Space ID (PASID)
  Capabilities: [200] Address Translation Service (ATS)
 



$ dmesg | grep vga

[    0.343635] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.343635] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.343635] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.343635] vgaarb: loaded
 



$  lsmod | grep video

uvcvideo              118784  0
videobuf2_vmalloc      16384  1 uvcvideo
videobuf2_memops       16384  1 videobuf2_vmalloc
videobuf2_v4l2         28672  1 uvcvideo
videobuf2_common       53248  2 videobuf2_v4l2,uvcvideo
videodev              212992  3 videobuf2_v4l2,uvcvideo,videobuf2_common
media                  45056  2 videodev,uvcvideo
usbcore               294912  4 xhci_hcd,usbhid,uvcvideo,xhci_pci
video                  45056  1 i915
 


merci.gif

Pied de page des forums

Propulsé par FluxBB