logo Debian Debian Debian-France Debian-Facile Debian-fr.org Forum-Debian.fr Debian ? Communautés logo inclusivité

Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

Pages : 1

#1 Re : Matériel » [RESOLU] problème startX avec Bullseye et GPU Intel UHD 620 » 24-11-2020 16:59:52

NormandiePi
Oui Merci Robert.
J'ai mis à jour le grub.
ça me change la vie.
Enfin une Debian bullseye OK sur mon laptop.
il me reste à accéder à la partition data de Windows 10 cryptée et mettre Filezilla et d'autre soft pour bosser.

#2 Re : Matériel » [RESOLU] problème startX avec Bullseye et GPU Intel UHD 620 » 24-11-2020 12:53:51

NormandiePi
Bonjour,
Ah ma pause déjeuner commence bien.
Merci Robert.
et Merci èfpé

Robert, en mode recovery du Grub, je n'arrive même pas au stade ou il me propose le login. L'écran se freeze (tout noir) et avec Phymouth, je vois les taches éxécutées avant ce freeze.

J'ai suivi la procédure donnée par èfpé et j'arrive à me connecter (avoir mon bureau Xfce) en 1920x1080 !

Je résume.

1. Télécharger le fichier: 1920x1080.bin présent ici: https://github.com/akatrevorjay/edid-generator  (remarque : ce fichier pèse 128 octets)
2. Copie ce fichier ici: /lib/firmware/edid/
3. reboot
4. au démarrage du Grub , taper "e"
5. sur la ligne qui contient QUIET, saisir drm.edid_firmware=edid/1920x1080.bin . on aura donc: "drm.edid_firmware=edid/1920x1080.bin QUIET"
6. faire F10
7. et hop, Champagne, j'ai la page de login Xfce en 1920x1080 et je me loggue sans souci.


Cette solution corrige le problème.

Il me reste à mettre ce paramètre dans le Grub pour l'avoir de manière définitive.

Je ferme la file.

Merci à vous tous et in fine, pas nécessaire d'installer un driver particulier. Juste l'EDID résoud le problème avec un fichier de 128 octets !!!!!! . Je n'avais pas mis la main sur la file trouvée par .
NB: Mes moteurs de recherche utilisés sont: Qwant, DuckDuckGo et Google à la fin.

Bon déjeuner.

#3 Re : Matériel » [RESOLU] problème startX avec Bullseye et GPU Intel UHD 620 » 23-11-2020 22:22:45

NormandiePi
Merci Robert pour ton retour.

J'ai planté ma Debian avec le test du fichier de conf 80-intel.conf

1er test ce matin, fichier créé et déposé ici:
/etc/X11/xorg.conf.d/80-intel.conf

Section "Device"
  Identifier "Intel Graphics"
  Driver "intel"
  Option "AccelMethod" "SNA"
EndSection



Je reboote et pan, j'obtiens un écran noir, même pas l'écran de login soit avec un desktop ou en commande.
J'ai aussi tenté avec nomodeset=1.

J'ai tout réinstallé la Debian car je ne maitrise pas le recovery.

Ce soir, test avec :
/usr/share/X11/xorg.conf.d/80-intel.conf

Section "Device"
  Identifier "Intel Graphics"
  Driver "modesetting"
EndSection



idem.
impossible de rebooter.
écran noir sans avoir la possibilité de se loguer. Je refais l'install de la Debian Bullseye !
Est-ce que le problème vient d'un conflit avec les autres fichiers de conf :
root@pommard:/usr/share/X11/xorg.conf.d# ls -l
total 20
-rw-r--r-- 1 root root   92 22 oct.   2019 10-amdgpu.conf
-rw-r--r-- 1 root root 1350 31 mars   2020 10-quirks.conf
-rw-r--r-- 1 root root   92 22 oct.   2019 10-radeon.conf
-rw-r--r-- 1 root root 1429 17 août  12:45 40-libinput.conf
-rw-r--r-- 1 root root 2747  6 août   2019 70-wacom.conf

il y a notamment amdgpu ? Est-ce normal?
je continue encore un peu les recherches ce soir mais pas envie de refaire une install de la Debian si je casse tout.

#4 Re : Matériel » [RESOLU] problème startX avec Bullseye et GPU Intel UHD 620 » 23-11-2020 14:41:15

NormandiePi
Robert, Croutons,

Merci Robert, te revoilà.
J'ai planté ma Debian ce matin, après un:

apt-get remove --purge xserver-xorg-video-intel
apt-get remove --purge amdgpu-dkms
apt-get remove --purge xserver-xorg-video-intel
 


J'ai du le lancer 2 fois le remove de xorg-intel pour qu'il se fasse correctement.

J'ai rebooté mais pan ! impossible d'arriver jusqu'à l'écran de login même avec le nomodeset=1 .
Je n'avais que les logs à l'écran.
Puisque j'avais fait tellement d'install /de désinstall de paquets: amggpu, amggpu-pro, gpu-utils, ... j'ai décidé de faire un réinstall complète de la Debian.
Et j'ai modifié le sources.list ensuite en indiquant les non-free (NB: je suis en bullseye testing)

apt-get update
apt-get upgrade
apt-get install firmware-misc-nonfree firmware-iwlwifi intel-microcode
reboot
 


Sans nomodeset=1, je n'arrive pas à avoir l'écran de login. J'ai un écran noir avant.
Avec cette réinstallation, voici les logs de X:

root@pommard:/home/thomas# more /var/log/Xorg.0.log
[     3.180]
X.Org X Server 1.20.8
X Protocol Version 11, Revision 0
[     3.180] Build Operating System: Linux 4.19.0-8-amd64 x86_64 Debian
[     3.180] Current Operating System: Linux pommard 5.9.0-2-amd64 #1 SMP Deb
ian 5.9.6-1 (2020-11-08) x86_64
[     3.180] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.9.0-2-amd64 root
=UUID=b7d817b5-5e77-4fef-aaca-a664f728da5b ro nomodeset=1 quiet
[     3.180] Build Date: 31 March 2020  10:14:40AM
[     3.180] xorg-server 2:1.20.8-2 (https://www.debian.org/support)
[     3.180] Current version of pixman: 0.36.0
[     3.180]  Before reporting problems, check http://wiki.x.org
  to make sure that you have the latest version.
[     3.180] Markers: (--) probed, (**) from config file, (==) default settin
g,
  (++) from command line, (!!) notice, (II) informational,
  (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     3.180] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Nov 23 12:54:52
2020
[     3.181] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     3.181] (==) No Layout section.  Using the first Screen section.
[     3.181] (==) No screen section available. Using defaults.
[     3.181] (**) |-->Screen "Default Screen Section" (0)
[     3.181] (**) |   |-->Monitor "<default monitor>"
[     3.182] (==) No monitor specified for screen "Default Screen Section".
  Using a default monitor configuration.
[     3.182] (==) Automatically adding devices
[     3.182] (==) Automatically enabling devices
[     3.182] (==) Automatically adding GPU devices
[     3.182] (==) Max clients allowed: 256, resource mask: 0x1fffff
[     3.183] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exis
t.
[     3.183]  Entry deleted from font path.
[     3.184] (==) FontPath set to:
  /usr/share/fonts/X11/misc,
  /usr/share/fonts/X11/100dpi/:unscaled,
  /usr/share/fonts/X11/75dpi/:unscaled,
  /usr/share/fonts/X11/Type1,
  /usr/share/fonts/X11/100dpi,
  /usr/share/fonts/X11/75dpi,
  built-ins
[     3.184] (==) ModulePath set to "/usr/lib/xorg/modules"
[     3.184] (II) The server relies on udev to provide the list of input devi
ces.
  If no devices become available, reconfigure udev or disable AutoAddDe
vices.
[     3.184] (II) Loader magic: 0x55e2d2e66e20
[     3.184] (II) Module ABI versions:
[     3.184]  X.Org ANSI C Emulation: 0.4
[     3.184]  X.Org Video Driver: 24.1
[     3.184]  X.Org XInput driver : 24.1
[     3.184]  X.Org Server Extension : 10.0
[     3.186] (++) using VT number 7

[     3.186] (II) systemd-logind: logind integration requires -keeptty and -k
eeptty was not provided, disabling logind integration
[     3.189] (--) PCI:*(0@0:2:0) 8086:3ea0:1043:17d1 rev 0, Mem @ 0x600000000
0/16777216, 0x4000000000/268435456, I/O @ 0x00003000/64, BIOS @ 0x????????/13
1072
[     3.189] (II) LoadModule: "glx"
[     3.189] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     3.194] (II) Module glx: vendor="X.Org Foundation"
[     3.194]  compiled for 1.20.8, module version = 1.0.0
[     3.194]  ABI class: X.Org Server Extension, version 10.0
[     3.194] (==) Matched modesetting as autoconfigured driver 0
[     3.194] (==) Matched fbdev as autoconfigured driver 1
[     3.194] (==) Matched vesa as autoconfigured driver 2
[     3.194] (==) Assigned the driver to the xf86ConfigLayout
[     3.194] (II) LoadModule: "modesetting"



Et j'ai toujours l'erreur avec cette nouvelle installation  card0, missing directory !

root@pommard:/home/thomas# cat /var/log/Xorg.0.log|grep card0
[     3.199] (EE) open /dev/dri/card0: No such file or directory
[     3.199] (EE) open /dev/dri/card0: No such file or directory


Pour te répondre aussi Robert,
1. Oui, nomodeset=1 n'est pas viable.
2. Le package linux-headers-amd64 n'est plus installé.

Ajout de sbin dans le path, ça se passe dans le fichier

vi /root/.bashrc


bloc à supprimer si la commande n’affiche rien


J'ai ajouté ce path car il était incomplet:

#Added by TB
export PATH='/usr/sbin':$PATH



Je sauve et je reboote.
démarrage avec nomodeset=1

root@pommard:/etc/X11/xorg.conf.d# lspci | grep -i vga | cut -d: -f3
 Intel Corporation UHD Graphics 620 (Whiskey Lake)
 



J'ai lu:

Intel

    If your graphic card was manufactured in 2007 and newer, try uninstalling the xserver-xorg-video-intel package and use the builtin modesetting driver (xserver-xorg-core) instead.
 



J'ai installé:

apt-get install dbus-launch



puis test de

startx
 


C'est Ok mais j'étais avec une session nomodeset=1

un test trouvé sur Reddit:
https://www.reddit.com/r/debian/comment … o_work_on/
Donc je crée:

touch /etc/X11/xorg.conf.d/80-intel.conf
vi /etc/X11/xorg.conf.d/80-intel.conf



Je mets ça dans le fichier comme indiqué mais j'ai placé le fichier là: /etc/X11/xorg.conf.d/ au lieu de /usr/...

Section "Device"
  Identifier "Intel Graphics"
  Driver "intel"
  Option "AccelMethod" "SNA"
EndSection
 


reboot avec et sans nomodeset=1

test Ko. Ce test m'a cassé mon profil "thomas".
Je dois maintenant me connecter en root avec le desktop !!! grrrr....

Je crains qu'il faille vraiment créer un xorg.conf pour que j'arrive à avoir un desktop correct (Robert me l'avait suggéré mais peur de tout cassé !
J'ai cassé ma Debian en faisant ça.
Je creuse....

#5 Matériel » [RESOLU] problème startX avec Bullseye et GPU Intel UHD 620 » 22-11-2020 23:15:27

NormandiePi
Réponses : 16
Bonjour,

Suite à maintes recherches et tests faits, je fais appel à votre aide.
Robert m'a permis d'avancer mais nous avions bloqué sur le GPU.

La file initiale est la suite:
https://debian-facile.org/viewtopic.php?id=28535
NB: pas utile de la lire.

J'ai fait de nombreux tests, ne je n'arrive pas à lancer ma Debian 10 (bullseye) jusqu'à l'écran de login. J'ai un écran noir avant.
Le problème vient du GPU Intel UHD 620.

Voici mon matériel:

root@pommard:~# lshw -short



Chemin matériel   Périphérique   Classe         Description
==============================================================
                                    system         ZenBook UX431FA
/0                                  bus            UX431FA
/0/0                                memory         64KiB BIOS
/0/3a                               memory         8GiB Mémoire Système
/0/3a/0                             memory         4GiB Série de composants
/0/3a/1                             memory         4GiB Série de composants
/0/45                               memory         256KiB L1 cache
/0/46                               memory         1MiB L2 cache
/0/47                               memory         8MiB L3 cache
/0/48                               processor      Intel(R) Core(TM) i7-8565U
/0/100                              bridge         Coffee Lake HOST and DRAM
/0/100/2                            display        UHD Graphics 620 (Whiskey
/0/100/4                            generic        Xeon E3-1200 v5/E3-1500 v5
/0/100/8                            generic        Xeon E3-1200 v5/v6 / E3-15
/0/100/12                           generic        Cannon Point-LP Thermal Co
/0/100/14                           bus            Cannon Point-LP USB 3.1 xH
/0/100/14/0        usb1             bus            xHCI Host Controller
/0/100/14/0/1                       bus            USB2.0 Hub
/0/100/14/0/1/1                     generic        USB 10/100/1000 LAN
/0/100/14/0/1/2                     bus            USB 2.0 Hub
/0/100/14/0/1/2/2                   multimedia     EarPods_TC01_K9I
/0/100/14/0/4                       multimedia     USB2.0 HD UVC WebCam
/0/100/14/0/a                       communication  Bluetooth 9460/9560 Jeffer
/0/100/14/1        usb2             bus            xHCI Host Controller
/0/100/14/1/1                       bus            USB3.0 Hub
/0/100/14.2                         memory         RAM memory
/0/100/14.3        wlo1             network        Cannon Point-LP CNVi [Wire
/0/100/15                           bus            Cannon Point-LP Serial IO
/0/100/16                           communication  Cannon Point-LP MEI Contro
/0/100/17                           storage        Cannon Point-LP SATA Contr
/0/100/1d                           bridge         Cannon Point-LP PCI Expres
/0/100/1d/0                         storage        WD Black 2018 / PC SN520 N
/0/100/1e                           communication  Cannon Point-LP Serial IO
/0/100/1e.3                         bus            Intel Corporation
/0/100/1f                           bridge         Cannon Point-LP LPC Contro
/0/100/1f.3                         multimedia     Cannon Point-LP High Defin
/0/100/1f.4                         bus            Cannon Point-LP SMBus Cont
/0/100/1f.5                         bus            Cannon Point-LP SPI Contro
/0/1                                system         PnP device PNP0c02
/0/2                                system         PnP device PNP0c02
/0/3                                generic        PnP device INT3f0d
/0/4                                input          PnP device PNP0303
/0/5                                system         PnP device PNP0c02
/0/6                                system         PnP device PNP0c02
/0/7                                system         PnP device PNP0c02
/0/8                                system         PnP device PNP0c02
/1                                  power          To Be Filled By O.E.M.
/2                 enx00e04c68000f  network        Ethernet interface
 



La version qui est intallé est:

root@pommard:~/Téléchargements# lsb_release -a
 


No LSB modules are available.
Distributor ID: Debian
Description:  Debian GNU/Linux bullseye/sid
Release:  testing
Codename: bullseye
 


root@pommard:~/Téléchargements# uname -a
 


Linux pommard 5.9.0-2-amd64 #1 SMP Debian 5.9.6-1 (2020-11-08) x86_64 GNU/Linux
 


Les noyaux, je lance avevc le 5.9.0-2-amd64

root@pommard:# dpkg -l | grep -iE "linux-image|linux-headers"


ii  linux-headers-5.9.0-2-amd64                5.9.6-1                        amd64        Header files for Linux 5.9.0-2-amd64
ii  linux-headers-5.9.0-2-common               5.9.6-1                        all          Common header files for Linux 5.9.0-2
rc  linux-headers-amd64                        5.9.6-1                        amd64        Header files for Linux amd64 configuration (meta-package)
ii  linux-image-5.9.0-1-amd64                  5.9.1-1                        amd64        Linux 5.9 for 64-bit PCs (signed)
ii  linux-image-5.9.0-2-amd64                  5.9.6-1                        amd64        Linux 5.9 for 64-bit PCs (signed)
ii  linux-image-amd64                          5.9.6-1                        amd64        Linux for 64-bit PCs (meta-package)
 



root@pommard:~# lspci


00:00.0 Host bridge: Intel Corporation Coffee Lake HOST and DRAM Controller (rev 0b)
00:02.0 VGA compatible controller: Intel Corporation UHD Graphics 620 (Whiskey Lake)
00:04.0 Signal processing controller: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Thermal Subsystem (rev 0b)
00:08.0 System peripheral: Intel Corporation Xeon E3-1200 v5/v6 / E3-1500 v5 / 6th/7th/8th Gen Core Processor Gaussian Mixture Model
00:12.0 Signal processing controller: Intel Corporation Cannon Point-LP Thermal Controller (rev 30)
00:14.0 USB controller: Intel Corporation Cannon Point-LP USB 3.1 xHCI Controller (rev 30)
00:14.2 RAM memory: Intel Corporation Cannon Point-LP Shared SRAM (rev 30)
00:14.3 Network controller: Intel Corporation Cannon Point-LP CNVi [Wireless-AC] (rev 30)
00:15.0 Serial bus controller [0c80]: Intel Corporation Cannon Point-LP Serial IO I2C Controller #0 (rev 30)
00:16.0 Communication controller: Intel Corporation Cannon Point-LP MEI Controller #1 (rev 30)
00:17.0 SATA controller: Intel Corporation Cannon Point-LP SATA Controller [AHCI Mode] (rev 30)
00:1d.0 PCI bridge: Intel Corporation Cannon Point-LP PCI Express Root Port #9 (rev f0)
00:1e.0 Communication controller: Intel Corporation Cannon Point-LP Serial IO UART Controller #2 (rev 30)
00:1e.3 Serial bus controller [0c80]: Intel Corporation Device 9dab (rev 30)
00:1f.0 ISA bridge: Intel Corporation Cannon Point-LP LPC Controller (rev 30)
00:1f.3 Audio device: Intel Corporation Cannon Point-LP High Definition Audio Controller (rev 30)
00:1f.4 SMBus: Intel Corporation Cannon Point-LP SMBus Controller (rev 30)
00:1f.5 Serial bus controller [0c80]: Intel Corporation Cannon Point-LP SPI Controller (rev 30)
01:00.0 Non-Volatile memory controller: Sandisk Corp WD Black 2018 / PC SN520 NVMe SSD (rev 01)
 



root@pommard:~# lspci -kk | grep -A3 VGA
 


00:02.0 VGA compatible controller: Intel Corporation UHD Graphics 620 (Whiskey Lake)
  DeviceName: Onboard - Video
  Subsystem: ASUSTeK Computer Inc. UHD Graphics 620 (Whiskey Lake)
  Kernel modules: i915
 



root@pommard:# systool -vm i915
Module = "i915"

  Attributes:
    coresize            = "2658304"
    initsize            = "0"
    initstate           = "live"
    refcnt              = "0"
    taint               = ""
    uevent              = <store method only>

  Parameters:
    disable_display     = "N"
    disable_power_well  = "-1"
    dmc_firmware_path   = "(null)"
    edp_vswing          = "0"
    enable_dc           = "-1"
    enable_dp_mst       = "Y"
    enable_dpcd_backlight= "-1"
    enable_fbc          = "-1"
    enable_guc          = "0"
    enable_gvt          = "N"
    enable_hangcheck    = "Y"
    enable_ips          = "1"
    enable_psr          = "-1"
    error_capture       = "Y"
    fastboot            = "-1"
    force_probe         = ""
    force_reset_modeset_test= "N"
    guc_firmware_path   = "(null)"
    guc_log_level       = "-1"
    huc_firmware_path   = "(null)"
    invert_brightness   = "0"
    load_detect_test    = "N"
    lvds_channel_mode   = "0"
    mmio_debug          = "0"
    modeset             = "-1"
    nuclear_pageflip    = "N"
    panel_use_ssc       = "-1"
    psr_safest_params   = "N"
    reset               = "3"
    vbt_firmware        = "(null)"
    vbt_sdvo_panel_type = "-1"
    verbose_state_checks= "Y"

  Sections:
    .altinstr_aux       = "0xffffffffc0d452f5"
    .altinstr_replacement= "0xffffffffc0d4512d"
    .altinstructions    = "0xffffffffc0da9e74"
    .bss                = "0xffffffffc0e31500"
    .data..cacheline_aligned= "0xffffffffc0e30a40"
    .data..read_mostly  = "0xffffffffc0e2c7a0"
    .data.once          = "0xffffffffc0e2c71c"
    .data               = "0xffffffffc0e21000"
    .exit.text          = "0xffffffffc0d452ab"
    .fixup              = "0xffffffffc0d4532b"
    .gnu.linkonce.this_module= "0xffffffffc0e31140"
    .init.rodata        = "0xffffffffc0e7f000"
    .init.text          = "0xffffffffc0e7e000"
    .note.Linux         = "0xffffffffc0d46024"
    .note.gnu.build-id  = "0xffffffffc0d46000"
    .orc_unwind         = "0xffffffffc0dd8b15"
    .orc_unwind_ip      = "0xffffffffc0daa361"
    .parainstructions   = "0xffffffffc0da86e8"
    .ref.data           = "0xffffffffc0e2d0c0"
    .rodata             = "0xffffffffc0d460c0"
    .rodata.str1.1      = "0xffffffffc0d9a628"
    .rodata.str1.8      = "0xffffffffc0d70698"
    .smp_locks          = "0xffffffffc0d995c4"
    .strtab             = "0xffffffffc0eadf60"
    .symtab             = "0xffffffffc0e80000"
    .text               = "0xffffffffc0bf4000"
    .text.unlikely      = "0xffffffffc0d3d1d5"
    __bpf_raw_tp_map    = "0xffffffffc0e2c840"
    __bug_table         = "0xffffffffc0e28d2c"
    __dyndbg            = "0xffffffffc0e2f090"
    __ex_table          = "0xffffffffc0e1ec44"
    __jump_table        = "0xffffffffc0e20000"
    __kcrctab_gpl       = "0xffffffffc0d4609c"
    __ksymtab_gpl       = "0xffffffffc0d46048"
    __ksymtab_strings   = "0xffffffffc0e1eba8"
    __mcount_loc        = "0xffffffffc0d68b48"
    __param             = "0xffffffffc0e1e6a8"
    __tracepoints_ptrs  = "0xffffffffc0e1ec8c"
    __tracepoints_strings= "0xffffffffc0e1ed80"
    __tracepoints       = "0xffffffffc0e2e320"
    _ftrace_events      = "0xffffffffc0e2cf00"
 



root@pommard:/etc/environment.d# glxinfo | grep "OpenGL vendor string"



OpenGL vendor string: Mesa/X.org



Je teste que la 3D est OK:

root@pommard:/home/thomas# glxgears
 


J'ai bien une fenêtre qui s'ouvre avevc un engrenage et des roues dentées en 3D en mouvement

J'ai installé le package amdgpu en suivant la procédure d'ici mais sans succès:
https://wiki.debian.org/AMDGPUDriverOnStretchAndBuster2

J'ai toujours les erreurs suivants dans Xorg.0.log:
root@pommard:~# more /var/log/Xorg.0.log

[     3.061]
X.Org X Server 1.20.8
X Protocol Version 11, Revision 0
[     3.061] Build Operating System: Linux 4.19.0-8-amd64 x86_64 Debian
[     3.061] Current Operating System: Linux pommard 5.9.0-2-amd64 #1 SMP Deb
ian 5.9.6-1 (2020-11-08) x86_64
[     3.061] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.9.0-2-amd64 root
=UUID=d81f20a8-e73c-4594-9ca6-745480ea954d ro nomodeset=1 quiet
[     3.061] Build Date: 31 March 2020  10:14:40AM
[     3.061] xorg-server 2:1.20.8-2 (https://www.debian.org/support)
[     3.061] Current version of pixman: 0.36.0
[     3.061]  Before reporting problems, check http://wiki.x.org
  to make sure that you have the latest version.
[     3.061] Markers: (--) probed, (**) from config file, (==) default settin
g,
  (++) from command line, (!!) notice, (II) informational,
  (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     3.061] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Nov 22 20:57:54
2020
[     3.066] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     3.066] (==) No Layout section.  Using the first Screen section.
[     3.066] (==) No screen section available. Using defaults.
[     3.066] (**) |-->Screen "Default Screen Section" (0)

… escamotage de 1 ligne
[     3.067] (==) No monitor specified for screen "Default Screen Section".
  Using a default monitor configuration.
[     3.067] (==) Automatically adding devices
[     3.067] (==) Automatically enabling devices
[     3.067] (==) Automatically adding GPU devices
[     3.067] (==) Max clients allowed: 256, resource mask: 0x1fffff
[     3.070] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exis
t.
[     3.070]  Entry deleted from font path.
[     3.072] (==) FontPath set to:
  /usr/share/fonts/X11/misc,
  /usr/share/fonts/X11/100dpi/:unscaled,
  /usr/share/fonts/X11/75dpi/:unscaled,
  /usr/share/fonts/X11/Type1,
  /usr/share/fonts/X11/100dpi,
  /usr/share/fonts/X11/75dpi,
  built-ins
[     3.072] (==) ModulePath set to "/usr/lib/xorg/modules"
[     3.072] (II) The server relies on udev to provide the list of input devi
ces.
  If no devices become available, reconfigure udev or disable AutoAddDe
vices.
[     3.072] (II) Loader magic: 0x55bb932ebe20

… escamotage de 1 ligne
[     3.072]  X.Org ANSI C Emulation: 0.4
[     3.072]  X.Org Video Driver: 24.1
[     3.072]  X.Org XInput driver : 24.1
[     3.072]  X.Org Server Extension : 10.0
[     3.073] (++) using VT number 7

[     3.073] (II) systemd-logind: logind integration requires -keeptty and -k
eeptty was not provided, disabling logind integration
[     3.075] (--) PCI:*(0@0:2:0) 8086:3ea0:1043:17d1 rev 0, Mem @ 0x600000000
0/16777216, 0x4000000000/268435456, I/O @ 0x00003000/64, BIOS @ 0x????????/13
1072
[     3.076] (II) LoadModule: "glx"
[     3.076] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     3.082] (II) Module glx: vendor="X.Org Foundation"
[     3.082]  compiled for 1.20.8, module version = 1.0.0
[     3.082]  ABI class: X.Org Server Extension, version 10.0
[     3.082] (==) Matched modesetting as autoconfigured driver 0
[     3.082] (==) Matched fbdev as autoconfigured driver 1
[     3.082] (==) Matched vesa as autoconfigured driver 2
[     3.082] (==) Assigned the driver to the xf86ConfigLayout
[     3.082] (II) LoadModule: "modesetting"
[     3.082] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[     3.083] (II) Module modesetting: vendor="X.Org Foundation"

… escamotage de 1 ligne
[     3.083]  Module class: X.Org Video Driver
[     3.083]  ABI class: X.Org Video Driver, version 24.1
[     3.083] (II) LoadModule: "fbdev"
[     3.083] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[     3.083] (II) Module fbdev: vendor="X.Org Foundation"
[     3.083]  compiled for 1.20.0, module version = 0.5.0
[     3.083]  Module class: X.Org Video Driver
[     3.083]  ABI class: X.Org Video Driver, version 24.0
[     3.083] (II) LoadModule: "vesa"
[     3.083] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[     3.084] (II) Module vesa: vendor="X.Org Foundation"
[     3.084]  compiled for 1.20.9, module version = 2.5.0
[     3.084]  Module class: X.Org Video Driver
[     3.084]  ABI class: X.Org Video Driver, version 24.1
[     3.084] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[     3.084] (II) FBDEV: driver for framebuffer: fbdev
[     3.084] (II) VESA: driver for VESA chipsets: vesa
[     3.087] (EE) open /dev/dri/card0: No such file or directory
[     3.087] (WW) Falling back to old probe method for modesetting
[     3.087] (EE) open /dev/dri/card0: No such file or directory
[     3.087] (II) Loading sub module "fbdevhw"
[     3.087] (II) LoadModule: "fbdevhw"
[     3.087] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so

… escamotage de 1 ligne
[     3.088]  compiled for 1.20.8, module version = 0.0.2
[     3.088]  ABI class: X.Org Video Driver, version 24.1
[     3.088] (EE) Unable to find a valid framebuffer device
[     3.088] (WW) Falling back to old probe method for fbdev
[     3.088] (II) Loading sub module "fbdevhw"
[     3.088] (II) LoadModule: "fbdevhw"
[     3.088] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[     3.088] (II) Module fbdevhw: vendor="X.Org Foundation"
[     3.088]  compiled for 1.20.8, module version = 0.0.2
[     3.088]  ABI class: X.Org Video Driver, version 24.1
[     3.088] (II) FBDEV(2): using default device
[     3.088] vesa: Refusing to run on UEFI
[     3.088] (EE) Screen 0 deleted because of no matching config section.
[     3.089] (II) UnloadModule: "modesetting"
[     3.089] (EE) Screen 0 deleted because of no matching config section.
[     3.089] (II) UnloadModule: "fbdev"
[     3.089] (II) UnloadSubModule: "fbdevhw"
[     3.089] (II) FBDEV(0): Creating default Display subsection in Screen sec
tion
  "Default Screen Section" for depth/fbbpp 24/32
[     3.089] (==) FBDEV(0): Depth 24, (==) framebuffer bpp 32
[     3.089] (==) FBDEV(0): RGB weight 888
[     3.089] (==) FBDEV(0): Default visual is TrueColor

… escamotage de 1 ligne
[     3.089] (II) FBDEV(0): hardware: EFI VGA (video memory: 1920kB)
[     3.089] (DB) xf86MergeOutputClassOptions unsupported bus type 0
[     3.089] (II) FBDEV(0): checking modes against framebuffer device...
[     3.089] (II) FBDEV(0): checking modes against monitor...
[     3.089] (II) FBDEV(0): Virtual size is 800x600 (pitch 800)
[     3.089] (**) FBDEV(0):  Built-in mode "current": 48.0 MHz, 46.9 kHz, 75.
1 Hz
[     3.089] (II) FBDEV(0): Modeline "current"x0.0   48.00  800 832 928 1024
 600 604 608 624 -hsync -vsync -csync (46.9 kHz b)
[     3.089] (==) FBDEV(0): DPI set to (96, 96)
[     3.089] (II) Loading sub module "fb"
[     3.089] (II) LoadModule: "fb"
[     3.089] (II) Loading /usr/lib/xorg/modules/libfb.so
[     3.090] (II) Module fb: vendor="X.Org Foundation"
[     3.090]  compiled for 1.20.8, module version = 1.0.0
[     3.090]  ABI class: X.Org ANSI C Emulation, version 0.4
[     3.090] (**) FBDEV(0): using shadow framebuffer
[     3.090] (II) Loading sub module "shadow"
[     3.090] (II) LoadModule: "shadow"
[     3.090] (II) Loading /usr/lib/xorg/modules/libshadow.so
[     3.090] (II) Module shadow: vendor="X.Org Foundation"
[     3.090]  compiled for 1.20.8, module version = 1.1.0
[     3.090]  ABI class: X.Org ANSI C Emulation, version 0.4
 



Pourquoi ai-je cette erreur:

open /dev/dri/card0: No such file or directory
 


J'ai réinstallé le package kms mais sans succès

C'est ça , open /dev/dri/card0: No such file or directory, la cause principale qui m'empèche de démarrer Debian?

Pour conclure, sur ce laptop, avec Bullseye, le seul moyen de démarrer Debian est d'avoir de mettre

nomodeset=1


au démarrage en paramètre du Kernel.
Avec cette option j'ai bien un bureau Xfce propre mais en résolution 800x600, dommage.
Et tout fonctionne parfaitement en tout cas.

Sinon, sans cette option (nomodeset=1), j'ai un écran noir en lancant Debian et je n'ai même pas l'écran de login (Desktop Xfce).

En fouillant sur les forums, j'ai vu que le GPU que j'ai ,le UHD 620, pose du fil à retordre à toutes les distribution linux mais je n'ai pas trouvé de solution.
Si vous avez des pistes, je suis preneur.
J'ai in

#6 Re : Matériel » [Fermé] Impossible d'installer Debian 10.6 sur Asus Zenbook UX431 » 09-11-2020 22:49:33

NormandiePi
Bonsoir,
Après une longue pause (1 semaine), je me suis remis sur mon problème d'installation de la Debian sur mon Asus Zenbook.

La version qui permet d'aller plus loin est la version bullseye testing.

Il y a plusieurs problème:
Je n'arrive à me connecter que si j'ajoute "nomodeset=1" dans le GRUB
mais j'ai un écran 800x600
1. problème de son (USB2-port2 dans kern.log)
2. problème I2C
3. peut-être d'autres problèmes liés au dock au moins.

Pour le problème de son, j'ai pu temporairement avoir du son uniquement sur le PC mais pas avec l'enceinte branchée sur le dock car il y a un souci à ce niveau.

Voici ce qui est branché sur les ports USB:

root@pommard:/home/thomas# lsusb -t
/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/6p, 10000M
    |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 5000M
        |__ Port 1: Dev 3, If 0, Class=Vendor Specific Class, Driver=r8152, 5000M
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/12p, 480M
    |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/5p, 480M
        |__ Port 2: Dev 6, If 0, Class=Hub, Driver=hub/4p, 480M
            |__ Port 2: Dev 7, If 1, Class=Audio, Driver=snd-usb-audio, 12M
            |__ Port 2: Dev 7, If 2, Class=Audio, Driver=snd-usb-audio, 12M
            |__ Port 2: Dev 7, If 0, Class=Audio, Driver=snd-usb-audio, 12M
            |__ Port 2: Dev 7, If 3, Class=Human Interface Device, Driver=usbhid, 12M
    |__ Port 4: Dev 3, If 1, Class=Video, Driver=uvcvideo, 480M
    |__ Port 4: Dev 3, If 0, Class=Video, Driver=uvcvideo, 480M
    |__ Port 10: Dev 4, If 0, Class=Wireless, Driver=btusb, 12M
    |__ Port 10: Dev 4, If 1, Class=Wireless, Driver=btusb, 12M
 


J'ai cette erreur là (quand le dock est branché au portable)

thomas@pommard:~$ /usr/sbin/alsactl init
alsa-lib main.c:983:(snd_use_case_mgr_open) error: failed to import hw:0 use case configuration -2
Found hardware: "HDA-Intel" "Realtek ALC294" "HDA:10ec0294,104317d1,00100004 HDA:8086280b,80860101,00100000" "0x1043" "0x17d1"
Hardware is initialized using a generic method
alsa-lib main.c:983:(snd_use_case_mgr_open) error: failed to import hw:1 use case configuration -2
Found hardware: "USB-Audio" "USB Mixer" "USB2000:dd00" "" ""
Hardware is initialized using a generic method
 



Solution trouvée: il faut désactiver le port USB2 sur lequel est branchée l'enceinte sur le dock:

root@pommard:/home/thomas# echo disabled | sudo tee /sys/bus/usb/devices/usb2/power/wakeup
 



Résultat:

disabled
 



Pour tester le son sur le portable:

speaker-test -c 2 -l 1 -t wav
 



NB: au prochain reboot, le port USB2-port2 sera à nouveau activé donc je n'aurai plus de son. J'ai au moins la solution palliative. Je pourrai soit mettre le port dans une blacklist ou avoir un script lancé au démarrage de la Debian Bullseye.
Je continue avec mon baton de pélerin pour résoudre les autres problèmes.
[MAJ 10/11/20] correction faute grammaire.

#7 Re : Matériel » [Fermé] Impossible d'installer Debian 10.6 sur Asus Zenbook UX431 » 03-11-2020 15:43:01

NormandiePi

tu a le paquet  "libv4l-0" que tu peut installer (il est installé sur ma machine )


J'étais en train de voir ça avant que tu me le demande.
J'ai le paquet d'installer.
Je pars en réunion.

#8 Re : Matériel » [Fermé] Impossible d'installer Debian 10.6 sur Asus Zenbook UX431 » 03-11-2020 15:29:12

NormandiePi
Oui j'ai bien "secure boot" disable et tous les autres trucs de security sur USB en autres sont "disable"
Avec Win10 et cet Asus, il faut être disable sinon impossible de booter sur une clé USB.

#9 Re : Matériel » [Fermé] Impossible d'installer Debian 10.6 sur Asus Zenbook UX431 » 03-11-2020 15:14:44

NormandiePi
voici le résultat:

root@pommard:/home/thomas# dmesg | grep drm
[    2.064502] systemd[1]: Starting Load Kernel Module drm...
[    2.113382] systemd[1]: modprobe@drm.service: Succeeded.
[    2.113963] systemd[1]: Finished Load Kernel Module drm.
 



Pour le pb de ma webcam, c'est étrange car ici:
https://www.ideasonboard.org/uvc/
on ne voit pas la ref de ma webcam mais les ref : 13d3:5* qui ont des soucis.

UVC 1.50 device USB2.0 HD UVC WebCam (13d3:56d3)

#10 Re : Matériel » [Fermé] Impossible d'installer Debian 10.6 sur Asus Zenbook UX431 » 03-11-2020 14:39:19

NormandiePi
Merci encore pour tout le temps que tu as passé.

J'avais fait des tests encore hier soir avec toutes les combinaisons:
1. boot avec dock branché sans nomodeset=1 : crash, écran noir au démarrage
2. boot sans dock sans nomodeset=1 : crash, écran noir au démarrage
3. boot avec dock branché avec nomodeset=1 : OK, j'arrive à me connecter
4. boot sans dock avec nomodeset=1 : OK, j'arrive à me connecter

résultat du lspci:

root@pommard:/home/thomas# lspci -nnk | grep -i vga -A3
00:02.0 VGA compatible controller [0300]: Intel Corporation UHD Graphics 620 (Whiskey Lake) [8086:3ea0]
  DeviceName: Onboard - Video
  Subsystem: ASUSTeK Computer Inc. UHD Graphics 620 (Whiskey Lake) [1043:17d1]
  Kernel modules: i915
 



Je viens de faire une MAJ de i2c-tools:

apt-get install i2c-tools
 

#11 Re : Matériel » [Fermé] Impossible d'installer Debian 10.6 sur Asus Zenbook UX431 » 03-11-2020 08:47:39

NormandiePi
Oui il n'y a rien de grave.
Voici le journal à l'instant au reboot avec nomodeset=1 et dock non-branché:

root@pommard:/home/thomas# journalctl -r -p err
-- Logs begin at Tue 2020-11-03 08:41:04 CET, end at Tue 2020-11-03 08:41:31>
nov. 03 08:41:18 pommard lightdm[719]: gkr-pam: unable to locate daemon cont>
nov. 03 08:41:05 pommard bluetoothd[537]: sap-server: Operation not permitte>
nov. 03 08:41:05 pommard bluetoothd[537]: profiles/sap/server.c:sap_server_r>
nov. 03 08:41:04 pommard kernel: firmware_class: See [url]https://wiki.debian.org[/url]>
nov. 03 08:41:04 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 03 08:41:04 pommard kernel: i2c i2c-1: failed to add I2C device XXXX000>
nov. 03 08:41:04 pommard kernel: i2c i2c-1: Failed to register i2c client XX>
nov. 03 08:41:04 pommard kernel: i2c i2c-1: failed to add I2C device XXXX000>
nov. 03 08:41:04 pommard kernel: i2c i2c-1: Failed to register i2c client XX>
nov. 03 08:41:04 pommard kernel: i2c i2c-1: failed to add I2C device XXXX000>
nov. 03 08:41:04 pommard kernel: i2c i2c-1: Failed to register i2c client XX>
 


Si je branche le dock et n'indique pas nomodeset, j'obtiens toujours un écran noir donc on a un pb avec le dock et encore autre chose .
Par exemple dans dmesg on voit un pb avec la webcam? regarde à 2.59s

[    2.593900] uvcvideo: Found UVC 1.50 device USB2.0 HD UVC WebCam (13d3:56d3)
[    2.601852] uvcvideo: Failed to initialize entity for entity 6
[    2.601853] uvcvideo: Failed to register entities (-22).


dmesg complet:

[    0.076491] mce: CPU0: Thermal monitoring enabled (TM1)
[    0.076506] process: using mwait in idle threads
[    0.076508] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.076508] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.076510] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.076511] Spectre V2 : Mitigation: Full generic retpoline
[    0.076512] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.076512] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.076513] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.076513] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[    0.076514] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.076517] SRBDS: Mitigation: Microcode
[    0.076517] MDS: Mitigation: Clear CPU buffers
[    0.076661] Freeing SMP alternatives memory: 32K
[    0.078111] smpboot: CPU0: Intel(R) Core(TM) i7-8565U CPU @ 1.80GHz (family: 0x6, model: 0x8e, stepping: 0xb)
[    0.078201] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.078225] ... version:                4
[    0.078225] ... bit width:              48
[    0.078225] ... generic registers:      4
[    0.078226] ... value mask:             0000ffffffffffff
[    0.078226] ... max period:             00007fffffffffff
[    0.078226] ... fixed-purpose events:   3
[    0.078227] ... event mask:             000000070000000f
[    0.078254] rcu: Hierarchical SRCU implementation.
[    0.078547] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.078596] smp: Bringing up secondary CPUs ...
[    0.078648] x86: Booting SMP configuration:
[    0.078649] .... node  #0, CPUs:      #1 #2 #3 #4
[    0.083366] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[    0.083366]  #5 #6 #7
[    0.085878] smp: Brought up 1 node, 8 CPUs
[    0.085878] smpboot: Max logical packages: 1
[    0.085878] smpboot: Total of 8 processors activated (31999.48 BogoMIPS)
[    0.097786] node 0 deferred pages initialised in 12ms
[    0.100234] devtmpfs: initialized
[    0.100234] x86/mm: Memory block size: 128MB
[    0.100234] PM: Registering ACPI NVS region [mem 0x89881000-0x89932fff] (729088 bytes)
[    0.100234] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.100234] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.100234] pinctrl core: initialized pinctrl subsystem
[    0.100234] NET: Registered protocol family 16
[    0.100234] audit: initializing netlink subsys (disabled)
[    0.100234] audit: type=2000 audit(1604393421.048:1): state=initialized audit_enabled=0 res=1
[    0.100234] thermal_sys: Registered thermal governor 'fair_share'
[    0.100234] thermal_sys: Registered thermal governor 'bang_bang'
[    0.100234] thermal_sys: Registered thermal governor 'step_wise'
[    0.100234] thermal_sys: Registered thermal governor 'user_space'
[    0.100234] cpuidle: using governor ladder
[    0.100234] cpuidle: using governor menu
[    0.100234] ACPI: bus type PCI registered
[    0.100234] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.100234] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.100234] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.100234] PCI: Using configuration type 1 for base access
[    0.101886] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.102266] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.102266] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.190986] ACPI: Added _OSI(Module Device)
[    0.190986] ACPI: Added _OSI(Processor Device)
[    0.190986] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.190986] ACPI: Added _OSI(Processor Aggregator Device)
[    0.190986] ACPI: Added _OSI(Linux-Dell-Video)
[    0.190986] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.190986] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.233836] ACPI: 10 ACPI AML tables successfully acquired and loaded
[    0.239212] ACPI: Dynamic OEM Table Load:
[    0.239216] ACPI: SSDT 0xFFFF95D3346BA800 0000F4 (v02 PmRef  Cpu0Psd  00003000 INTL 20160527)
[    0.240120] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked
[    0.241149] ACPI: Dynamic OEM Table Load:
[    0.241152] ACPI: SSDT 0xFFFF95D3346C6000 000400 (v02 PmRef  Cpu0Cst  00003001 INTL 20160527)
[    0.242131] ACPI: Dynamic OEM Table Load:
[    0.242134] ACPI: SSDT 0xFFFF95D3076DB000 00053F (v02 PmRef  Cpu0Ist  00003000 INTL 20160527)
[    0.243148] ACPI: Dynamic OEM Table Load:
[    0.243150] ACPI: SSDT 0xFFFF95D334777E00 00011B (v02 PmRef  Cpu0Hwp  00003000 INTL 20160527)
[    0.244058] ACPI: Dynamic OEM Table Load:
[    0.244062] ACPI: SSDT 0xFFFF95D3076D8000 000724 (v02 PmRef  HwpLvt   00003000 INTL 20160527)
[    0.245147] ACPI: Dynamic OEM Table Load:
[    0.245150] ACPI: SSDT 0xFFFF95D3076DB800 0005FC (v02 PmRef  ApIst    00003000 INTL 20160527)
[    0.246163] ACPI: Dynamic OEM Table Load:
[    0.246165] ACPI: SSDT 0xFFFF95D3346C3800 000317 (v02 PmRef  ApHwp    00003000 INTL 20160527)
[    0.247192] ACPI: Dynamic OEM Table Load:
[    0.247196] ACPI: SSDT 0xFFFF95D3076F7000 000AB0 (v02 PmRef  ApPsd    00003000 INTL 20160527)
[    0.248522] ACPI: Dynamic OEM Table Load:
[    0.248524] ACPI: SSDT 0xFFFF95D3346C7C00 00030A (v02 PmRef  ApCst    00003000 INTL 20160527)
[    0.251811] ACPI: EC: EC started
[    0.251811] ACPI: EC: interrupt blocked
[    0.254190] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.254191] ACPI: \_SB_.PCI0.LPCB.H_EC: Boot DSDT EC used to handle transactions
[    0.254192] ACPI: Interpreter enabled
[    0.254223] ACPI: (supports S0 S3 S4 S5)
[    0.254224] ACPI: Using IOAPIC for interrupt routing
[    0.254250] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.255064] ACPI: Enabled 8 GPEs in block 00 to 7F
[    0.259155] ACPI: Power Resource [PXP] (on)
[    0.377625] ACPI: Power Resource [PXP] (off)
[    0.379850] ACPI: Power Resource [BTPR] (on)
[    0.381521] ACPI: Power Resource [USBC] (on)
[    0.381745] ACPI: Power Resource [PAUD] (on)
[    0.386536] ACPI: Power Resource [V0PR] (on)
[    0.387126] ACPI: Power Resource [V1PR] (on)
[    0.387694] ACPI: Power Resource [V2PR] (on)
[    0.391566] ACPI: Power Resource [PXTC] (off)
[    0.395220] ACPI: Power Resource [WRST] (on)
[    0.407311] ACPI: Power Resource [FN00] (off)
[    0.407362] ACPI: Power Resource [FN01] (off)
[    0.407415] ACPI: Power Resource [FN02] (off)
[    0.407464] ACPI: Power Resource [FN03] (off)
[    0.407512] ACPI: Power Resource [FN04] (off)
[    0.407987] ACPI: Power Resource [PIN] (off)
[    0.408294] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.408298] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.410570] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[    0.411334] PCI host bridge to bus 0000:00
[    0.411335] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.411336] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.411337] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.411338] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.411338] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.411339] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[    0.411339] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[    0.411340] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[    0.411340] pci_bus 0000:00: root bus resource [mem 0x90000000-0xdfffffff window]
[    0.411341] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x7fffffffff window]
[    0.411342] pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window]
[    0.411342] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.411359] pci 0000:00:00.0: [8086:3e34] type 00 class 0x060000
[    0.411631] pci 0000:00:02.0: [8086:3ea0] type 00 class 0x030000
[    0.411639] pci 0000:00:02.0: reg 0x10: [mem 0x6000000000-0x6000ffffff 64bit]
[    0.411643] pci 0000:00:02.0: reg 0x18: [mem 0x4000000000-0x400fffffff 64bit pref]
[    0.411647] pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
[    0.411659] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.411766] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
[    0.411774] pci 0000:00:04.0: reg 0x10: [mem 0x6001110000-0x6001117fff 64bit]
[    0.411917] pci 0000:00:08.0: [8086:1911] type 00 class 0x088000
[    0.411925] pci 0000:00:08.0: reg 0x10: [mem 0x600112a000-0x600112afff 64bit]
[    0.412071] pci 0000:00:12.0: [8086:9df9] type 00 class 0x118000
[    0.412089] pci 0000:00:12.0: reg 0x10: [mem 0x6001129000-0x6001129fff 64bit]
[    0.412259] pci 0000:00:14.0: [8086:9ded] type 00 class 0x0c0330
[    0.412273] pci 0000:00:14.0: reg 0x10: [mem 0x6001100000-0x600110ffff 64bit]
[    0.412325] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.412621] pci 0000:00:14.2: [8086:9def] type 00 class 0x050000
[    0.412636] pci 0000:00:14.2: reg 0x10: [mem 0x6001120000-0x6001121fff 64bit]
[    0.412646] pci 0000:00:14.2: reg 0x18: [mem 0x6001128000-0x6001128fff 64bit]
[    0.412784] pci 0000:00:14.3: [8086:9df0] type 00 class 0x028000
[    0.412805] pci 0000:00:14.3: reg 0x10: [mem 0x600111c000-0x600111ffff 64bit]
[    0.412935] pci 0000:00:14.3: PME# supported from D0 D3hot D3cold
[    0.413128] pci 0000:00:15.0: [8086:9de8] type 00 class 0x0c8000
[    0.413206] pci 0000:00:15.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[    0.413610] pci 0000:00:16.0: [8086:9de0] type 00 class 0x078000
[    0.413629] pci 0000:00:16.0: reg 0x10: [mem 0x6001126000-0x6001126fff 64bit]
[    0.413698] pci 0000:00:16.0: PME# supported from D3hot
[    0.413875] pci 0000:00:17.0: [8086:9dd3] type 00 class 0x010601
[    0.413887] pci 0000:00:17.0: reg 0x10: [mem 0x90100000-0x90101fff]
[    0.413893] pci 0000:00:17.0: reg 0x14: [mem 0x90103000-0x901030ff]
[    0.413898] pci 0000:00:17.0: reg 0x18: [io  0x3090-0x3097]
[    0.413905] pci 0000:00:17.0: reg 0x1c: [io  0x3080-0x3083]
[    0.413912] pci 0000:00:17.0: reg 0x20: [io  0x3060-0x307f]
[    0.413917] pci 0000:00:17.0: reg 0x24: [mem 0x90102000-0x901027ff]
[    0.413952] pci 0000:00:17.0: PME# supported from D3hot
[    0.414095] pci 0000:00:1d.0: [8086:9db0] type 01 class 0x060400
[    0.414163] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.414186] pci 0000:00:1d.0: PTM enabled (root), 4ns granularity
[    0.414417] pci 0000:00:1e.0: [8086:9da8] type 00 class 0x078000
[    0.414495] pci 0000:00:1e.0: reg 0x10: [mem 0x6001125000-0x6001125fff 64bit]
[    0.414554] pci 0000:00:1e.0: reg 0x18: [mem 0x6001124000-0x6001124fff 64bit]
[    0.414888] pci 0000:00:1e.3: [8086:9dab] type 00 class 0x0c8000
[    0.415011] pci 0000:00:1e.3: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[    0.415401] pci 0000:00:1f.0: [8086:9d84] type 00 class 0x060100
[    0.415690] pci 0000:00:1f.3: [8086:9dc8] type 00 class 0x040380
[    0.415719] pci 0000:00:1f.3: reg 0x10: [mem 0x6001118000-0x600111bfff 64bit]
[    0.415755] pci 0000:00:1f.3: reg 0x20: [mem 0x6001000000-0x60010fffff 64bit]
[    0.415830] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.416338] pci 0000:00:1f.4: [8086:9da3] type 00 class 0x0c0500
[    0.416362] pci 0000:00:1f.4: reg 0x10: [mem 0x6001122000-0x60011220ff 64bit]
[    0.416390] pci 0000:00:1f.4: reg 0x20: [io  0xefa0-0xefbf]
[    0.416517] pci 0000:00:1f.5: [8086:9da4] type 00 class 0x0c8000
[    0.416531] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
[    0.416714] pci 0000:01:00.0: [15b7:5003] type 00 class 0x010802
[    0.416733] pci 0000:01:00.0: reg 0x10: [mem 0x90000000-0x90003fff 64bit]
[    0.416951] pci 0000:00:1d.0: PCI bridge to [bus 01]
[    0.416954] pci 0000:00:1d.0:   bridge window [mem 0x90000000-0x900fffff]
[    0.418941] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0
[    0.418997] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *1
[    0.419051] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0
[    0.419104] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0
[    0.419158] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0
[    0.419211] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0
[    0.419264] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0
[    0.419317] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0
[    0.426900] ACPI: EC: interrupt unblocked
[    0.426900] ACPI: EC: event unblocked
[    0.426916] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.426916] ACPI: EC: GPE=0x50
[    0.426917] ACPI: \_SB_.PCI0.LPCB.H_EC: Boot DSDT EC initialization complete
[    0.426918] ACPI: \_SB_.PCI0.LPCB.H_EC: EC: Used to handle transactions and events
[    0.426964] iommu: Default domain type: Translated
[    0.426971] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.426971] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.426971] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.426971] vgaarb: loaded
[    0.426971] EDAC MC: Ver: 3.0.0
[    0.429710] Registered efivars operations
[    0.429773] NetLabel: Initializing
[    0.429773] NetLabel:  domain hash size = 128
[    0.429773] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.429783] NetLabel:  unlabeled traffic allowed by default
[    0.429784] PCI: Using ACPI for IRQ routing
[    0.471871] PCI: pci_cache_line_size set to 64 bytes
[    0.472076] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.472077] e820: reserve RAM buffer [mem 0x822e1000-0x83ffffff]
[    0.472077] e820: reserve RAM buffer [mem 0x8234e000-0x83ffffff]
[    0.472078] e820: reserve RAM buffer [mem 0x8575b000-0x87ffffff]
[    0.472078] e820: reserve RAM buffer [mem 0x8a00f000-0x8bffffff]
[    0.472079] e820: reserve RAM buffer [mem 0x26e000000-0x26fffffff]
[    0.472566] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.472568] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    0.473710] clocksource: Switched to clocksource tsc-early
[    0.480274] VFS: Disk quotas dquot_6.6.0
[    0.480284] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.480365] AppArmor: AppArmor Filesystem Enabled
[    0.480377] pnp: PnP ACPI init
[    0.480463] system 00:00: [mem 0x40000000-0x403fffff] could not be reserved
[    0.480467] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.480610] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.480611] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.480613] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.480692] system 00:02: [io  0x1854-0x1857] has been reserved
[    0.480694] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.480805] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.480940] system 00:04: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.480941] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.480941] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.480942] system 00:04: [mem 0xe0000000-0xefffffff] has been reserved
[    0.480943] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.480944] system 00:04: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.480944] system 00:04: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.480945] system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.480947] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.481100] system 00:05: [io  0x1800-0x18fe] could not be reserved
[    0.481101] system 00:05: [mem 0xfd000000-0xfd69ffff] has been reserved
[    0.481102] system 00:05: [mem 0xfd6b0000-0xfd6cffff] has been reserved
[    0.481103] system 00:05: [mem 0xfd6f0000-0xfdffffff] has been reserved
[    0.481103] system 00:05: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    0.481104] system 00:05: [mem 0xfe200000-0xfe7fffff] has been reserved
[    0.481105] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[    0.481107] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.481311] system 00:06: [io  0x2000-0x20fe] has been reserved
[    0.481313] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.482081] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.482915] pnp: PnP ACPI: found 8 devices
[    0.488120] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.488163] NET: Registered protocol family 2
[    0.488248] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    0.488283] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.488398] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    0.488446] TCP: Hash tables configured (established 65536 bind 65536)
[    0.488474] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.488492] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.488525] NET: Registered protocol family 1
[    0.488528] NET: Registered protocol family 44
[    0.488538] pci 0000:00:15.0: BAR 0: assigned [mem 0x4010000000-0x4010000fff 64bit]
[    0.488593] pci 0000:00:1e.3: BAR 0: assigned [mem 0x4010001000-0x4010001fff 64bit]
[    0.488647] pci 0000:00:1d.0: PCI bridge to [bus 01]
[    0.488650] pci 0000:00:1d.0:   bridge window [mem 0x90000000-0x900fffff]
[    0.488655] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.488656] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.488656] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.488657] pci_bus 0000:00: resource 7 [mem 0x000e0000-0x000e3fff window]
[    0.488657] pci_bus 0000:00: resource 8 [mem 0x000e4000-0x000e7fff window]
[    0.488658] pci_bus 0000:00: resource 9 [mem 0x000e8000-0x000ebfff window]
[    0.488659] pci_bus 0000:00: resource 10 [mem 0x000ec000-0x000effff window]
[    0.488659] pci_bus 0000:00: resource 11 [mem 0x000f0000-0x000fffff window]
[    0.488660] pci_bus 0000:00: resource 12 [mem 0x90000000-0xdfffffff window]
[    0.488660] pci_bus 0000:00: resource 13 [mem 0x4000000000-0x7fffffffff window]
[    0.488661] pci_bus 0000:00: resource 14 [mem 0xfc800000-0xfe7fffff window]
[    0.488662] pci_bus 0000:01: resource 1 [mem 0x90000000-0x900fffff]
[    0.488756] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.489094] PCI: CLS 64 bytes, default 64
[    0.489124] Trying to unpack rootfs image as initramfs...
[    0.789835] Freeing initrd memory: 31448K
[    0.789873] DMAR: No ATSR found
[    0.789926] DMAR: dmar0: Using Queued invalidation
[    0.789930] DMAR: dmar1: Using Queued invalidation
[    0.790137] pci 0000:00:00.0: Adding to iommu group 0
[    0.790146] pci 0000:00:02.0: Adding to iommu group 1
[    0.790157] pci 0000:00:04.0: Adding to iommu group 2
[    0.790166] pci 0000:00:08.0: Adding to iommu group 3
[    0.790187] pci 0000:00:12.0: Adding to iommu group 4
[    0.790207] pci 0000:00:14.0: Adding to iommu group 5
[    0.790216] pci 0000:00:14.2: Adding to iommu group 5
[    0.790224] pci 0000:00:14.3: Adding to iommu group 6
[    0.790237] pci 0000:00:15.0: Adding to iommu group 7
[    0.790249] pci 0000:00:16.0: Adding to iommu group 8
[    0.790258] pci 0000:00:17.0: Adding to iommu group 9
[    0.790271] pci 0000:00:1d.0: Adding to iommu group 10
[    0.790288] pci 0000:00:1e.0: Adding to iommu group 11
[    0.790297] pci 0000:00:1e.3: Adding to iommu group 11
[    0.790320] pci 0000:00:1f.0: Adding to iommu group 12
[    0.790330] pci 0000:00:1f.3: Adding to iommu group 12
[    0.790340] pci 0000:00:1f.4: Adding to iommu group 12
[    0.790350] pci 0000:00:1f.5: Adding to iommu group 12
[    0.790365] pci 0000:01:00.0: Adding to iommu group 13
[    0.793271] DMAR: Intel(R) Virtualization Technology for Directed I/O
[    0.793272] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.793274] software IO TLB: mapped [mem 0x7de39000-0x81e39000] (64MB)
[    0.793363] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    0.793937] Initialise system trusted keyrings
[    0.793975] Key type blacklist registered
[    0.794033] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[    0.795257] zbud: loaded
[    0.795419] integrity: Platform Keyring initialized
[    0.795421] Key type asymmetric registered
[    0.795422] Asymmetric key parser 'x509' registered
[    0.795429] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    0.795475] io scheduler mq-deadline registered
[    0.798040] pcieport 0000:00:1d.0: PME: Signaling with IRQ 122
[    0.798097] pcieport 0000:00:1d.0: AER: enabled with IRQ 122
[    0.798132] pcieport 0000:00:1d.0: DPC: enabled with IRQ 122
[    0.798133] pcieport 0000:00:1d.0: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
[    0.798228] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.798243] efifb: probing for efifb
[    0.798254] efifb: framebuffer at 0x4000000000, using 1920k, total 1920k
[    0.798255] efifb: mode is 800x600x32, linelength=3200, pages=1
[    0.798255] efifb: scrolling: redraw
[    0.798256] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.798341] Console: switching to colour frame buffer device 100x37
[    0.799332] fb0: EFI VGA frame buffer device
[    0.799339] intel_idle: MWAIT substates: 0x11142120
[    0.799339] intel_idle: v0.5.1 model 0x8E
[    0.799824] intel_idle: Local APIC timer is reliable in all C-states
[    0.803130] thermal LNXTHERM:00: registered as thermal_zone0
[    0.803131] ACPI: Thermal Zone [TZ00] (59 C)
[    0.803347] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.804088] Linux agpgart interface v0.103
[    0.804115] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    0.804115] AMD-Vi: AMD IOMMUv2 functionality not available on this system
[    0.804708] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    0.804708] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.807931] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.808035] mousedev: PS/2 mouse device common for all mice
[    0.808275] rtc_cmos rtc_cmos: RTC can wake from S4
[    0.809170] rtc_cmos rtc_cmos: registered as rtc0
[    0.809384] rtc_cmos rtc_cmos: setting system clock to 2020-11-03T08:50:22 UTC (1604393422)
[    0.809399] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram
[    0.809406] intel_pstate: Intel P-state driver initializing
[    0.810246] intel_pstate: HWP enabled
[    0.810389] ledtrig-cpu: registered to indicate activity on CPUs
[    0.810895] NET: Registered protocol family 10
[    0.815716] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.818309] Segment Routing with IPv6
[    0.818324] mip6: Mobile IPv6
[    0.818325] NET: Registered protocol family 17
[    0.818543] mpls_gso: MPLS GSO support
[    0.819429] microcode: sig=0x806eb, pf=0x80, revision=0xd6
[    0.819686] microcode: Microcode Update Driver: v2.2.
[    0.819689] IPI shorthand broadcast: enabled
[    0.819698] sched_clock: Marking stable (814848666, 4490523)->(823760521, -4421332)
[    0.820193] registered taskstats version 1
[    0.820194] Loading compiled-in X.509 certificates
[    0.851172] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[    0.851186] Loaded X.509 cert 'Debian Secure Boot Signer 2020: 00b55eb3b9'
[    0.851208] zswap: loaded using pool lzo/zbud
[    0.852075] Key type ._fscrypt registered
[    0.852076] Key type .fscrypt registered
[    0.852076] Key type fscrypt-provisioning registered
[    0.852145] AppArmor: AppArmor sha1 policy hashing enabled
[    0.853584] integrity: Loading X.509 certificate: UEFI:db
[    0.853766] integrity: Loaded X.509 cert 'ASUSTeK Notebook SW Key Certificate: b8e581e4df77a5bb4282d5ccfc00c071'
[    0.853767] integrity: Loading X.509 certificate: UEFI:db
[    0.854032] integrity: Loaded X.509 cert 'ASUSTeK MotherBoard SW Key Certificate: da83b990422ebc8c441f8d8b039a65a2'
[    0.854032] integrity: Loading X.509 certificate: UEFI:db
[    0.854049] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[    0.854049] integrity: Loading X.509 certificate: UEFI:db
[    0.854067] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[    0.854067] integrity: Loading X.509 certificate: UEFI:db
[    0.854213] integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63'
[    0.857908] Freeing unused kernel image (initmem) memory: 1636K
[    0.930230] Write protecting the kernel read-only data: 18432k
[    0.931581] Freeing unused kernel image (text/rodata gap) memory: 2044K
[    0.931883] Freeing unused kernel image (rodata/data gap) memory: 332K
[    1.005075] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.005079] Run /init as init process
[    1.005080]   with arguments:
[    1.005080]     /init
[    1.005081]   with environment:
[    1.005081]     HOME=/
[    1.005081]     TERM=linux
[    1.005082]     BOOT_IMAGE=/boot/vmlinuz-5.9.0-1-amd64
[    1.078895] hid: raw HID events driver (C) Jiri Kosina
[    1.092475] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[    1.092667] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[    1.099276] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
[    1.099642] idma64 idma64.0: Found Intel integrated DMA 64-bit
[    1.104362] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[    1.104429] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[    1.107406] battery: ACPI: Battery Slot [BAT0] (battery present)
[    1.109171] SCSI subsystem initialized
[    1.120070] ACPI: bus type USB registered
[    1.120091] usbcore: registered new interface driver usbfs
[    1.120098] usbcore: registered new interface driver hub
[    1.120137] usbcore: registered new device driver usb
[    1.125137] nvme nvme0: pci function 0000:01:00.0
[    1.129628] libata version 3.00 loaded.
[    1.133379] nvme nvme0: 8/0/0 default/read/poll queues
[    1.133488] i2c i2c-0: 2/2 memory slots populated (from DMI)
[    1.136009] ahci 0000:00:17.0: version 3.0
[    1.136022] ahci 0000:00:17.0: enabling device (0000 -> 0003)
[    1.136319] i2c_hid i2c-ELAN1301:00: supply vdd not found, using dummy regulator
[    1.136361] i2c_hid i2c-ELAN1301:00: supply vddl not found, using dummy regulator
[    1.136393] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x4 impl SATA mode
[    1.136397] ahci 0000:00:17.0: flags: 64bit ncq sntf pm clo only pio slum part deso sadm sds apst
[    1.137078] scsi host0: ahci
[    1.137308] scsi host1: ahci
[    1.137430] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.137439] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    1.137455] scsi host2: ahci
[    1.137561] ata1: DUMMY
[    1.137562] ata2: DUMMY
[    1.137566] ata3: SATA max UDMA/133 abar m2048@0x90102000 port 0x90102200 irq 132
[    1.138556] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000000009810
[    1.138562] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.138780] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.09
[    1.138782] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.138783] usb usb1: Product: xHCI Host Controller
[    1.138784] usb usb1: Manufacturer: Linux 5.9.0-1-amd64 xhci-hcd
[    1.138785] usb usb1: SerialNumber: 0000:00:14.0
[    1.138921] hub 1-0:1.0: USB hub found
[    1.138940] hub 1-0:1.0: 12 ports detected
[    1.139678]  nvme0n1: p1 p2 p3 p4 p5 p6 p7 p8
[    1.140108] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.140111] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.140114] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
[    1.140156] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.09
[    1.140158] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.140159] usb usb2: Product: xHCI Host Controller
[    1.140160] usb usb2: Manufacturer: Linux 5.9.0-1-amd64 xhci-hcd
[    1.140161] usb usb2: SerialNumber: 0000:00:14.0
[    1.140282] hub 2-0:1.0: USB hub found
[    1.140298] hub 2-0:1.0: 6 ports detected
[    1.140475] usb: port power management may be unreliable
[    1.286377] i2c i2c-1: Failed to register i2c client XXXX0000:01 at 0x15 (-16)
[    1.286406] i2c i2c-1: failed to add I2C device XXXX0000:01 from ACPI
[    1.286683] i2c i2c-1: Failed to register i2c client XXXX0000:03 at 0x15 (-16)
[    1.286705] i2c i2c-1: failed to add I2C device XXXX0000:03 from ACPI
[    1.286900] i2c i2c-1: Failed to register i2c client XXXX0000:05 at 0x15 (-16)
[    1.286923] i2c i2c-1: failed to add I2C device XXXX0000:05 from ACPI
[    1.305829] intel-lpss 0000:00:1e.0: enabling device (0000 -> 0002)
[    1.306517] idma64 idma64.1: Found Intel integrated DMA 64-bit
[    1.307046] dw-apb-uart.1: ttyS0 at MMIO 0x6001125000 (irq = 20, base_baud = 7500000) is a 16550A
[    1.307834] intel-lpss 0000:00:1e.3: enabling device (0000 -> 0002)
[    1.308430] idma64 idma64.2: Found Intel integrated DMA 64-bit
[    1.451355] ata3: SATA link down (SStatus 4 SControl 300)
[    1.461506] input: ELAN1301:00 04F3:30C6 Mouse as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-ELAN1301:00/0018:04F3:30C6.0001/input/input1
[    1.461760] input: ELAN1301:00 04F3:30C6 Touchpad as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-ELAN1301:00/0018:04F3:30C6.0001/input/input2
[    1.462005] hid-generic 0018:04F3:30C6.0001: input,hidraw0: I2C HID v1.00 Mouse [ELAN1301:00 04F3:30C6] on i2c-ELAN1301:00
[    1.473750] usb 1-4: new high-speed USB device number 2 using xhci_hcd
[    1.542460] PM: Image not found (code -22)
[    1.648598] usb 1-4: New USB device found, idVendor=13d3, idProduct=56d3, bcdDevice=18.54
[    1.648600] usb 1-4: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    1.648601] usb 1-4: Product: USB2.0 HD UVC WebCam
[    1.648602] usb 1-4: Manufacturer: Azurewave
[    1.648604] usb 1-4: SerialNumber: 0x0001
[    1.660616] EXT4-fs (nvme0n1p7): mounted filesystem with ordered data mode. Opts: (null)
[    1.706614] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[    1.758056] systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time.
[    1.770639] systemd[1]: Inserted module 'autofs4'
[    1.777799] usb 1-10: new full-speed USB device number 3 using xhci_hcd
[    1.809732] tsc: Refined TSC clocksource calibration: 1992.018 MHz
[    1.809740] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x396d7369390, max_idle_ns: 881590493256 ns
[    1.809959] clocksource: Switched to clocksource tsc
[    1.854527] systemd[1]: systemd 246.6-2 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    1.874277] systemd[1]: Detected architecture x86-64.
[    1.894627] systemd[1]: Set hostname to <pommard>.
[    1.927038] usb 1-10: New USB device found, idVendor=8087, idProduct=0aaa, bcdDevice= 0.02
[    1.927042] usb 1-10: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.002306] systemd[1]: Queued start job for default target Graphical Interface.
[    2.003330] systemd[1]: Created slice system-getty.slice.
[    2.003623] systemd[1]: Created slice system-modprobe.slice.
[    2.003853] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    2.004111] systemd[1]: Created slice User and Session Slice.
[    2.004177] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    2.004229] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    2.004418] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    2.004462] systemd[1]: Reached target Local Encrypted Volumes.
[    2.004498] systemd[1]: Reached target Paths.
[    2.004518] systemd[1]: Reached target Remote File Systems.
[    2.004533] systemd[1]: Reached target Slices.
[    2.004680] systemd[1]: Listening on Syslog Socket.
[    2.004783] systemd[1]: Listening on fsck to fsckd communication Socket.
[    2.004840] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    2.005000] systemd[1]: Listening on Journal Audit Socket.
[    2.005094] systemd[1]: Listening on Journal Socket (/dev/log).
[    2.005206] systemd[1]: Listening on Journal Socket.
[    2.005352] systemd[1]: Listening on udev Control Socket.
[    2.005443] systemd[1]: Listening on udev Kernel Socket.
[    2.006375] systemd[1]: Mounting Huge Pages File System...
[    2.007300] systemd[1]: Mounting POSIX Message Queue File System...
[    2.008265] systemd[1]: Mounting Kernel Debug File System...
[    2.009366] systemd[1]: Mounting Kernel Trace File System...
[    2.010595] systemd[1]: Starting Set the console keyboard layout...
[    2.012070] systemd[1]: Starting Create list of static device nodes for the current kernel...
[    2.013076] systemd[1]: Starting Load Kernel Module drm...
[    2.013454] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[    2.013502] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[    2.015246] systemd[1]: Starting Journal Service...
[    2.016659] systemd[1]: Starting Load Kernel Modules...
[    2.017657] systemd[1]: Starting Remount Root and Kernel File Systems...
[    2.018930] systemd[1]: Starting Coldplug All udev Devices...
[    2.021673] systemd[1]: Mounted Huge Pages File System.
[    2.022010] systemd[1]: Mounted POSIX Message Queue File System.
[    2.022186] systemd[1]: Mounted Kernel Debug File System.
[    2.022351] systemd[1]: Mounted Kernel Trace File System.
[    2.023120] systemd[1]: Finished Create list of static device nodes for the current kernel.
[    2.029998] systemd[1]: Finished Load Kernel Modules.
[    2.030342] systemd[1]: Condition check resulted in FUSE Control File System being skipped.
[    2.030482] systemd[1]: Condition check resulted in Kernel Configuration File System being skipped.
[    2.031556] EXT4-fs (nvme0n1p7): re-mounted. Opts: errors=remount-ro
[    2.031953] systemd[1]: Starting Apply Kernel Variables...
[    2.034434] systemd[1]: Finished Remount Root and Kernel File Systems.
[    2.035428] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[    2.035491] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[    2.036850] systemd[1]: Starting Load/Save Random Seed...
[    2.038307] systemd[1]: Starting Create System Users...
[    2.043384] systemd[1]: Finished Apply Kernel Variables.
[    2.052206] systemd[1]: Finished Load/Save Random Seed.
[    2.055311] systemd[1]: Finished Create System Users.
[    2.056660] systemd[1]: Starting Create Static Device Nodes in /dev...
[    2.070925] systemd[1]: Finished Create Static Device Nodes in /dev.
[    2.073204] systemd[1]: Starting Rule-based Manager for Device Events and Files...
[    2.073707] systemd[1]: modprobe@drm.service: Succeeded.
[    2.074310] systemd[1]: Finished Load Kernel Module drm.
[    2.112723] systemd[1]: Finished Set the console keyboard layout.
[    2.112899] systemd[1]: Reached target Local File Systems (Pre).
[    2.123211] systemd[1]: Finished Coldplug All udev Devices.
[    2.124614] systemd[1]: Starting Helper to synchronize boot up for ifupdown...
[    2.128083] systemd[1]: Finished Helper to synchronize boot up for ifupdown.
[    2.133364] systemd[1]: Started Rule-based Manager for Device Events and Files.
[    2.180382] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:19/PNP0C09:00/PNP0C0D:00/input/input3
[    2.189584] intel_pmc_core INT33A1:00:  initialized
[    2.193843] ACPI: Lid Switch [LID0]
[    2.194017] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[    2.194070] ACPI: Power Button [PWRB]
[    2.194162] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[    2.194226] ACPI: Power Button [PWRF]
[    2.354149] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
[    2.358896] systemd[1]: Found device WDC PC SN520 SDAPNUW-256G-1002 8.
[    2.360616] mc: Linux media interface: v0.10
[    2.365343] intel_rapl_common: Found RAPL domain package
[    2.365345] intel_rapl_common: Found RAPL domain dram
[    2.366378] systemd[1]: Found device WDC PC SN520 SDAPNUW-256G-1002 SYSTEM.
[    2.371267] systemd[1]: Activating swap /dev/disk/by-uuid/7782352e-719b-4ef8-8969-987f5f975373...
[    2.372568] systemd[1]: Starting File System Check on /dev/disk/by-uuid/8EA6-FE87...
[    2.377209] EFI Variables Facility v0.08 2004-May-17
[    2.378327] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[    2.378824] proc_thermal 0000:00:04.0: Creating sysfs group for PROC_THERMAL_PCI
[    2.380254] iTCO_vendor_support: vendor-support=0
[    2.395478] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    2.396402] cfg80211: Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf'
[    2.397361] cfg80211: Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
[    2.397812] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    2.399451] systemd[1]: Started File System Check Daemon to report status.
[    2.400131] platform regulatory.0: firmware: direct-loading firmware regulatory.db
[    2.400282] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s
[    2.412538] cryptd: max_cpu_qlen set to 1000
[    2.413085] videodev: Linux video capture interface: v2.00
[    2.414161] pstore: Using crash dump compression: deflate
[    2.414171] pstore: Registered efi as persistent store backend
[    2.447053] systemd[1]: Finished File System Check on /dev/disk/by-uuid/8EA6-FE87.
[    2.448410] systemd[1]: Mounting /boot/efi...
[    2.542325] input: PC Speaker as /devices/platform/pcspkr/input/input6
[    2.545604] Intel(R) Wireless WiFi driver for Linux
[    2.545660] iwlwifi 0000:00:14.3: enabling device (0000 -> 0002)
[    2.547709] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    2.547756] AVX2 version of gcm_enc/dec engaged.
[    2.547757] AES CTR mode by8 optimization enabled
[    2.547794] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[    2.552371] iwlwifi 0000:00:14.3: firmware: direct-loading firmware iwlwifi-9000-pu-b0-jf-b0-46.ucode
[    2.552394] iwlwifi 0000:00:14.3: WRT: Overriding region id 0
[    2.552395] iwlwifi 0000:00:14.3: WRT: Overriding region id 1
[    2.552397] iwlwifi 0000:00:14.3: WRT: Overriding region id 2
[    2.552398] iwlwifi 0000:00:14.3: WRT: Overriding region id 3
[    2.552399] iwlwifi 0000:00:14.3: WRT: Overriding region id 4
[    2.552400] iwlwifi 0000:00:14.3: WRT: Overriding region id 6
[    2.552401] iwlwifi 0000:00:14.3: WRT: Overriding region id 8
[    2.552402] iwlwifi 0000:00:14.3: WRT: Overriding region id 9
[    2.552403] iwlwifi 0000:00:14.3: WRT: Overriding region id 10
[    2.552404] iwlwifi 0000:00:14.3: WRT: Overriding region id 11
[    2.552405] iwlwifi 0000:00:14.3: WRT: Overriding region id 15
[    2.552406] iwlwifi 0000:00:14.3: WRT: Overriding region id 16
[    2.552407] iwlwifi 0000:00:14.3: WRT: Overriding region id 18
[    2.552408] iwlwifi 0000:00:14.3: WRT: Overriding region id 19
[    2.552409] iwlwifi 0000:00:14.3: WRT: Overriding region id 20
[    2.552410] iwlwifi 0000:00:14.3: WRT: Overriding region id 21
[    2.552416] iwlwifi 0000:00:14.3: Found debug destination: EXTERNAL_DRAM
[    2.552417] iwlwifi 0000:00:14.3: Found debug configuration: 0
[    2.552793] iwlwifi 0000:00:14.3: loaded firmware version 46.8902351f.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm
[    2.552813] iwlwifi 0000:00:14.3: firmware: failed to load iwl-debug-yoyo.bin (-2)
[    2.552850] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware
[    2.557779] Adding 1000444k swap on /dev/nvme0n1p8.  Priority:-2 extents:1 across:1000444k SSFS
[    2.564536] systemd[1]: Activated swap /dev/disk/by-uuid/7782352e-719b-4ef8-8969-987f5f975373.
[    2.564654] systemd[1]: Reached target Swap.
[    2.568120] input: ELAN1301:00 04F3:30C6 Mouse as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-ELAN1301:00/0018:04F3:30C6.0001/input/input7
[    2.568253] input: ELAN1301:00 04F3:30C6 Touchpad as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-ELAN1301:00/0018:04F3:30C6.0001/input/input8
[    2.570366] hid-multitouch 0018:04F3:30C6.0001: input,hidraw0: I2C HID v1.00 Mouse [ELAN1301:00 04F3:30C6] on i2c-ELAN1301:00
[    2.572777] asus_wmi: ASUS WMI generic driver loaded
[    2.577442] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[    2.577444] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    2.577444] RAPL PMU: hw unit of domain package 2^-14 Joules
[    2.577445] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    2.577446] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    2.577446] RAPL PMU: hw unit of domain psys 2^-14 Joules
[    2.577953] asus_wmi: Initialization: 0x1
[    2.578248] asus_wmi: BIOS WMI version: 8.1
[    2.578523] asus_wmi: SFUN value: 0x4a0061
[    2.578528] asus-nb-wmi asus-nb-wmi: Detected ATK, not ASUSWMI, use DSTS
[    2.578531] asus-nb-wmi asus-nb-wmi: Detected ATK, enable event queue
[    2.586013] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input9
[    2.593900] uvcvideo: Found UVC 1.50 device USB2.0 HD UVC WebCam (13d3:56d3)
[    2.601852] uvcvideo: Failed to initialize entity for entity 6
[    2.601853] uvcvideo: Failed to register entities (-22).
[    2.601944] input: USB2.0 HD UVC WebCam: USB2.0 HD as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input10
[    2.618886] usbcore: registered new interface driver uvcvideo
[    2.618887] USB Video Class driver (1.1.1)
[    2.629762] battery: new extension: ASUS Battery Extension
[    2.687794] systemd[1]: Mounted /boot/efi.
[    2.687938] systemd[1]: Reached target Local File Systems.
[    2.689452] systemd[1]: Starting Load AppArmor profiles...
[    2.690862] systemd[1]: Starting Set console font and keymap...
[    2.690957] systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
[    2.691031] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
[    2.695127] systemd[1]: Started Journal Service.
[    2.738033] audit: type=1400 audit(1604389824.420:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=401 comm="apparmor_parser"
[    2.738038] audit: type=1400 audit(1604389824.420:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=400 comm="apparmor_parser"
[    2.738424] audit: type=1400 audit(1604389824.424:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=399 comm="apparmor_parser"
[    2.738974] audit: type=1400 audit(1604389824.424:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=397 comm="apparmor_parser"
[    2.738977] audit: type=1400 audit(1604389824.424:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=397 comm="apparmor_parser"
[    2.741588] audit: type=1400 audit(1604389824.424:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=404 comm="apparmor_parser"
[    2.741593] audit: type=1400 audit(1604389824.424:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=404 comm="apparmor_parser"
[    2.741597] audit: type=1400 audit(1604389824.424:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=404 comm="apparmor_parser"
[    2.741907] audit: type=1400 audit(1604389824.428:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=402 comm="apparmor_parser"
[    2.922693] iwlwifi 0000:00:14.3: Detected Intel(R) Wireless-AC 9560, REV=0x318
[    3.016702] iwlwifi 0000:00:14.3: base HW address: fc:77:74:62:b8:53
[    3.027570] intel_rapl_common: Found RAPL domain package
[    3.027573] intel_rapl_common: Found RAPL domain core
[    3.027574] intel_rapl_common: Found RAPL domain uncore
[    3.027575] intel_rapl_common: Found RAPL domain dram
[    3.035442] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[    3.059090] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380
[    3.059122] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[    3.097283] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[    3.097730] thermal thermal_zone6: failed to read out thermal zone (-61)
[    3.112950] iwlwifi 0000:00:14.3 wlo1: renamed from wlan0
[    3.208693] Bluetooth: Core ver 2.22
[    3.208713] NET: Registered protocol family 31
[    3.208714] Bluetooth: HCI device and connection manager initialized
[    3.208719] Bluetooth: HCI socket layer initialized
[    3.208724] Bluetooth: L2CAP socket layer initialized
[    3.208735] Bluetooth: SCO socket layer initialized
[    3.219256] usbcore: registered new interface driver btusb
[    3.220671] Bluetooth: hci0: Bootloader revision 0.1 build 42 week 52 2015
[    3.221676] Bluetooth: hci0: Device revision is 2
[    3.221678] Bluetooth: hci0: Secure boot is enabled
[    3.221679] Bluetooth: hci0: OTP lock is enabled
[    3.221680] Bluetooth: hci0: API lock is enabled
[    3.221681] Bluetooth: hci0: Debug lock is disabled
[    3.221683] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[    3.224090] bluetooth hci0: firmware: direct-loading firmware intel/ibt-17-16-1.sfi
[    3.224095] Bluetooth: hci0: Found device firmware: intel/ibt-17-16-1.sfi
[    3.478490] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    3.478492] Bluetooth: BNEP filters: protocol multicast
[    3.478497] Bluetooth: BNEP socket layer initialized
[    4.790039] Bluetooth: hci0: Waiting for firmware download to complete
[    4.790683] Bluetooth: hci0: Firmware loaded in 1534132 usecs
[    4.790808] Bluetooth: hci0: Waiting for device to boot
[    4.804632] Bluetooth: hci0: Device booted in 13619 usecs
[    4.804934] bluetooth hci0: firmware: direct-loading firmware intel/ibt-17-16-1.ddc
[    4.804937] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-17-16-1.ddc
[    4.806754] Bluetooth: hci0: Applying Intel DDC parameters completed
[    4.809823] Bluetooth: hci0: Firmware revision 0.1 build 241 week 36 2020
[    4.870575] NET: Registered protocol family 38
[   20.737856] usb 1-1: new high-speed USB device number 4 using xhci_hcd
[   20.886824] usb 1-1: New USB device found, idVendor=1d5c, idProduct=5012, bcdDevice= 1.00
[   20.886831] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   20.886836] usb 1-1: Product: USB2.0 Hub
[   20.886840] usb 1-1: Manufacturer: Fresco Logic, Inc.
[   20.887888] hub 1-1:1.0: USB hub found
[   20.887940] hub 1-1:1.0: 5 ports detected
[   21.013920] usb 2-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[   21.035234] usb 2-1: New USB device found, idVendor=1d5c, idProduct=5002, bcdDevice= 1.00
[   21.035240] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   21.035244] usb 2-1: Product: USB3.0 Hub
[   21.035246] usb 2-1: Manufacturer: Fresco Logic, Inc.
[   21.037135] hub 2-1:1.0: USB hub found
[   21.037212] hub 2-1:1.0: 4 ports detected
[   21.450281] usb 1-1.2: new high-speed USB device number 5 using xhci_hcd
[   21.550586] usb 1-1.2: New USB device found, idVendor=1a40, idProduct=0801, bcdDevice= 1.00
[   21.550593] usb 1-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[   21.550597] usb 1-1.2: Product: USB 2.0 Hub
[   21.551697] hub 1-1.2:1.0: USB hub found
[   21.551740] hub 1-1.2:1.0: 4 ports detected
[   21.629838] usb 2-1.1: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd
[   21.651670] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00
[   21.651672] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[   21.651674] usb 2-1.1: Product: USB 10/100/1000 LAN
[   21.651675] usb 2-1.1: Manufacturer: Realtek
[   21.651676] usb 2-1.1: SerialNumber: 000001
[   21.862325] usb 1-1.2.2: new full-speed USB device number 6 using xhci_hcd
[   21.986652] usb 1-1.2.2: New USB device found, idVendor=2000, idProduct=dd00, bcdDevice=11.16
[   21.986658] usb 1-1.2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   21.986661] usb 1-1.2.2: Product: EarPods_TC01_K9I
[   21.986664] usb 1-1.2.2: Manufacturer: C&T
[   21.986667] usb 1-1.2.2: SerialNumber: U2dc0z7ws53a79rn
[   22.009824] input: C&T EarPods_TC01_K9I as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2.2/1-1.2.2:1.3/0003:2000:DD00.0002/input/input11
[   22.074296] hid-generic 0003:2000:DD00.0002: input,hidraw1: USB HID v1.00 Device [C&T EarPods_TC01_K9I] on usb-0000:00:14.0-1.2.2/input3
[   22.074374] usbcore: registered new interface driver usbhid
[   22.074375] usbhid: USB HID core driver
[   22.081791] usbcore: registered new interface driver snd-usb-audio
[   25.110278] usb usb2-port2: Cannot enable. Maybe the USB cable is bad?
[   29.198144] usb usb2-port2: Cannot enable. Maybe the USB cable is bad?
[   33.286028] usb usb2-port2: Cannot enable. Maybe the USB cable is bad?
[   33.286122] usb usb2-port2: attempt power cycle
[   37.689867] usb usb2-port2: Cannot enable. Maybe the USB cable is bad?
[   41.761766] usb usb2-port2: Cannot enable. Maybe the USB cable is bad?
[   41.798691] usbcore: registered new interface driver r8152
[   41.808539] usbcore: registered new interface driver cdc_ether
[   41.882052] usb 2-1.1: reset SuperSpeed Gen 1 USB device number 3 using xhci_hcd
[   41.910655] r8152 2-1.1:1.0: firmware: direct-loading firmware rtl_nic/rtl8153a-4.fw
[   41.929515] r8152 2-1.1:1.0: load rtl8153a-4 v2 02/07/20 successfully
[   41.960061] r8152 2-1.1:1.0 eth0: v1.11.11
[   41.982735] r8152 2-1.1:1.0 enx00e04c68000f: renamed from eth0
[   45.735696] IPv6: ADDRCONF(NETDEV_CHANGE): enx00e04c68000f: link becomes ready
[   45.735965] r8152 2-1.1:1.0 enx00e04c68000f: carrier on
[   46.057763] usb usb2-port2: Cannot enable. Maybe the USB cable is bad?
[   50.353784] usb usb2-port2: Cannot enable. Maybe the USB cable is bad?
[   54.665730] usb usb2-port2: Cannot enable. Maybe the USB cable is bad?
[   58.954114] usb usb2-port2: Cannot enable. Maybe the USB cable is bad?
[   59.608269] wlo1: authenticate with a0:04:60:b9:e5:e0
[   59.618297] wlo1: send auth to a0:04:60:b9:e5:e0 (try 1/3)
[   59.659922] wlo1: authenticated
[   59.661715] wlo1: associate with a0:04:60:b9:e5:e0 (try 1/3)
[   59.846278] wlo1: associate with a0:04:60:b9:e5:e0 (try 2/3)
[   59.895422] wlo1: RX AssocResp from a0:04:60:b9:e5:e0 (capab=0x431 status=0 aid=1)
[   59.922955] wlo1: associated
[   60.464696] iwlwifi 0000:00:14.3: No beacon heard and the time event is over already...
[   60.464795] wlo1: Connection to AP a0:04:60:b9:e5:e0 lost
[   63.250106] usb usb2-port2: Cannot enable. Maybe the USB cable is bad?
[   64.525734] snd_hda_intel 0000:00:1f.3: couldn't bind with audio component
[   64.556721] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC294: line_outs=2 (0x14/0x17/0x0/0x0/0x0) type:speaker
[   64.556724] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   64.556725] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   64.556726] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   64.556727] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   64.556728] snd_hda_codec_realtek hdaudioC0D0:      Headset Mic=0x19
[   64.556729] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[   65.009486] snd_hda_codec_hdmi hdaudioC0D2: No i915 binding for Intel HDMI/DP codec
[   65.009681] hdaudio hdaudioC0D2: Unable to bind the codec
[   65.009979] input: HDA Intel PCH Headset Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[   65.010058] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[   67.464019] usb usb2-port2: Cannot enable. Maybe the USB cable is bad?
[   70.555517] wlo1: authenticate with a0:04:60:b9:e5:e0
[   70.567910] wlo1: send auth to a0:04:60:b9:e5:e0 (try 1/3)
[   70.713083] wlo1: send auth to a0:04:60:b9:e5:e0 (try 2/3)
[   70.720440] wlo1: authenticated
[   70.724730] wlo1: associate with a0:04:60:b9:e5:e0 (try 1/3)
[   70.910301] wlo1: associate with a0:04:60:b9:e5:e0 (try 2/3)
[   70.945201] wlo1: RX AssocResp from a0:04:60:b9:e5:e0 (capab=0x431 status=0 aid=1)
[   70.960795] wlo1: associated
[   71.526932] iwlwifi 0000:00:14.3: No beacon heard and the time event is over already...
[   71.527024] wlo1: Connection to AP a0:04:60:b9:e5:e0 lost
[   71.724293] usb usb2-port2: Cannot enable. Maybe the USB cable is bad?
[   75.994051] usb usb2-port2: Cannot enable. Maybe the USB cable is bad?
root@pommard:/home/thomas#
 

#12 Re : Matériel » [Fermé] Impossible d'installer Debian 10.6 sur Asus Zenbook UX431 » 03-11-2020 00:24:57

NormandiePi
le journalctl avec les lignes complètes suite au reboot:

-- Logs begin at Tue 2020-11-03 00:16:17 CET, end at Tue 2020-11-03 00:18:00>
nov. 03 00:17:30 pommard wpa_supplicant[538]: dbus: wpa_dbus_property_changed: no property SessionLength in object /fi/w1/wpa_supplicant1/Interfaces/0

nov. 03 00:17:19 pommard kernel: hdaudio hdaudioC0D2: Unable to bind the codec
nov. 03 00:17:19 pommard wpa_supplicant[538]: dbus: wpa_dbus_property_changed: no property SessionLength in object /fi/w1/wpa_supplicant1/Interfaces/0

nov. 03 00:17:06 pommard wpa_supplicant[538]: dbus: wpa_dbus_property_changed: no property SessionLength in object /fi/w1/wpa_supplicant1/Interfaces/0

nov. 03 00:17:01 pommard kernel: iwlwifi 0000:00:14.3: Unhandled alg: 0x71b
nov. 03 00:17:01 pommard wpa_supplicant[538]: dbus: wpa_dbus_property_changed: no property SessionLength in object /fi/w1/wpa_supplicant1/Interfaces/0
nov. 03 00:17:01 pommard kernel: iwlwifi 0000:00:14.3: Unhandled alg: 0x707
nov. 03 00:17:01 pommard kernel: iwlwifi 0000:00:14.3: expected hw-decrypted unicast frame for station
nov. 03 00:17:01 pommard kernel: iwlwifi 0000:00:14.3: expected hw-decrypted unicast frame for station
nov. 03 00:17:01 pommard kernel: iwlwifi 0000:00:14.3: expected hw-decrypted unicast frame for station
nov. 03 00:17:01 pommard kernel: iwlwifi 0000:00:14.3: expected hw-decrypted unicast frame for station
nov. 03 00:17:01 pommard kernel: iwlwifi 0000:00:14.3: expected hw-decrypted unicast frame for station
 

#13 Re : Matériel » [Fermé] Impossible d'installer Debian 10.6 sur Asus Zenbook UX431 » 02-11-2020 23:06:31

NormandiePi
voici les logs de Xorg:


[     4.200]
X.Org X Server 1.20.8
X Protocol Version 11, Revision 0
[     4.200] Build Operating System: Linux 4.19.0-8-amd64 x86_64 Debian
[     4.200] Current Operating System: Linux pommard 5.9.0-1-amd64 #1 SMP Debian 5.9.1-1 (2020-10-17) x86_64
[     4.200] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.9.0-1-amd64 root=UUID=d81f20a8-e73c-4594-9ca6-745480ea954d ro nomodeset=1 quiet
[     4.201] Build Date: 31 March 2020  10:14:40AM
[     4.201] xorg-server 2:1.20.8-2 (https://www.debian.org/support)
[     4.201] Current version of pixman: 0.36.0
[     4.201]  Before reporting problems, check http://wiki.x.org
  to make sure that you have the latest version.
[     4.201] Markers: (--) probed, (**) from config file, (==) default setting,
  (++) from command line, (!!) notice, (II) informational,
  (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     4.201] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Nov  2 22:40:59 2020
[     4.202] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     4.203] (==) No Layout section.  Using the first Screen section.
[     4.203] (==) No screen section available. Using defaults.
[     4.203] (**) |-->Screen "Default Screen Section" (0)
[     4.203] (**) |   |-->Monitor "<default monitor>"
[     4.204] (==) No monitor specified for screen "Default Screen Section".
  Using a default monitor configuration.
[     4.204] (==) Automatically adding devices
[     4.204] (==) Automatically enabling devices
[     4.204] (==) Automatically adding GPU devices
[     4.204] (==) Max clients allowed: 256, resource mask: 0x1fffff
[     4.206] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[     4.207]  Entry deleted from font path.
[     4.208] (==) FontPath set to:
  /usr/share/fonts/X11/misc,
  /usr/share/fonts/X11/100dpi/:unscaled,
  /usr/share/fonts/X11/75dpi/:unscaled,
  /usr/share/fonts/X11/Type1,
  /usr/share/fonts/X11/100dpi,
  /usr/share/fonts/X11/75dpi,
  built-ins
[     4.208] (==) ModulePath set to "/usr/lib/xorg/modules"
[     4.208] (II) The server relies on udev to provide the list of input devices.
  If no devices become available, reconfigure udev or disable AutoAddDevices.
[     4.208] (II) Loader magic: 0x5608c85f1e20
[     4.208] (II) Module ABI versions:
[     4.208]  X.Org ANSI C Emulation: 0.4
[     4.208]  X.Org Video Driver: 24.1
[     4.208]  X.Org XInput driver : 24.1
[     4.208]  X.Org Server Extension : 10.0
[     4.210] (++) using VT number 7

[     4.210] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[     4.215] (--) PCI:*(0@0:2:0) 8086:3ea0:1043:17d1 rev 0, Mem @ 0x6000000000/16777216, 0x4000000000/268435456, I/O @ 0x00003000/64, BIOS @ 0x????????/131072
[     4.215] (II) LoadModule: "glx"
[     4.216] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     4.223] (II) Module glx: vendor="X.Org Foundation"
[     4.223]  compiled for 1.20.8, module version = 1.0.0
[     4.223]  ABI class: X.Org Server Extension, version 10.0
[     4.223] (==) Matched modesetting as autoconfigured driver 0
[     4.223] (==) Matched fbdev as autoconfigured driver 1
[     4.223] (==) Matched vesa as autoconfigured driver 2
[     4.223] (==) Assigned the driver to the xf86ConfigLayout
[     4.223] (II) LoadModule: "modesetting"
[     4.223] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[     4.224] (II) Module modesetting: vendor="X.Org Foundation"
[     4.224]  compiled for 1.20.8, module version = 1.20.8
[     4.224]  Module class: X.Org Video Driver
[     4.224]  ABI class: X.Org Video Driver, version 24.1
[     4.224] (II) LoadModule: "fbdev"
[     4.224] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[     4.225] (II) Module fbdev: vendor="X.Org Foundation"
[     4.225]  compiled for 1.20.0, module version = 0.5.0
[     4.225]  Module class: X.Org Video Driver
[     4.225]  ABI class: X.Org Video Driver, version 24.0
[     4.225] (II) LoadModule: "vesa"
[     4.225] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[     4.225] (II) Module vesa: vendor="X.Org Foundation"
[     4.225]  compiled for 1.20.9, module version = 2.5.0
[     4.225]  Module class: X.Org Video Driver
[     4.225]  ABI class: X.Org Video Driver, version 24.1
[     4.226] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[     4.226] (II) FBDEV: driver for framebuffer: fbdev
[     4.226] (II) VESA: driver for VESA chipsets: vesa
[     4.230] (EE) open /dev/dri/card0: No such file or directory
[     4.230] (WW) Falling back to old probe method for modesetting
[     4.230] (EE) open /dev/dri/card0: No such file or directory
[     4.230] (II) Loading sub module "fbdevhw"
[     4.230] (II) LoadModule: "fbdevhw"
[     4.231] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[     4.231] (II) Module fbdevhw: vendor="X.Org Foundation"
[     4.231]  compiled for 1.20.8, module version = 0.0.2
[     4.231]  ABI class: X.Org Video Driver, version 24.1
[     4.231] (EE) Unable to find a valid framebuffer device
[     4.231] (WW) Falling back to old probe method for fbdev
[     4.231] (II) Loading sub module "fbdevhw"
[     4.231] (II) LoadModule: "fbdevhw"
[     4.232] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[     4.232] (II) Module fbdevhw: vendor="X.Org Foundation"
[     4.232]  compiled for 1.20.8, module version = 0.0.2
[     4.232]  ABI class: X.Org Video Driver, version 24.1
[     4.232] (II) FBDEV(2): using default device
[     4.232] vesa: Refusing to run on UEFI
[     4.232] (EE) Screen 0 deleted because of no matching config section.
[     4.232] (II) UnloadModule: "modesetting"
[     4.232] (EE) Screen 0 deleted because of no matching config section.
[     4.232] (II) UnloadModule: "fbdev"
[     4.232] (II) UnloadSubModule: "fbdevhw"
[     4.232] (II) FBDEV(0): Creating default Display subsection in Screen section
  "Default Screen Section" for depth/fbbpp 24/32
[     4.232] (==) FBDEV(0): Depth 24, (==) framebuffer bpp 32
[     4.232] (==) FBDEV(0): RGB weight 888
[     4.232] (==) FBDEV(0): Default visual is TrueColor
[     4.232] (==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0)
[     4.232] (II) FBDEV(0): hardware: EFI VGA (video memory: 1920kB)
[     4.232] (DB) xf86MergeOutputClassOptions unsupported bus type 0
[     4.232] (II) FBDEV(0): checking modes against framebuffer device...
[     4.232] (II) FBDEV(0): checking modes against monitor...
[     4.232] (II) FBDEV(0): Virtual size is 800x600 (pitch 800)
[     4.232] (**) FBDEV(0):  Built-in mode "current": 48.0 MHz, 46.9 kHz, 75.1 Hz
[     4.232] (II) FBDEV(0): Modeline "current"x0.0   48.00  800 832 928 1024  600 604 608 624 -hsync -vsync -csync (46.9 kHz b)
[     4.232] (==) FBDEV(0): DPI set to (96, 96)
[     4.232] (II) Loading sub module "fb"
[     4.232] (II) LoadModule: "fb"
[     4.232] (II) Loading /usr/lib/xorg/modules/libfb.so
[     4.233] (II) Module fb: vendor="X.Org Foundation"
[     4.233]  compiled for 1.20.8, module version = 1.0.0
[     4.233]  ABI class: X.Org ANSI C Emulation, version 0.4
[     4.233] (**) FBDEV(0): using shadow framebuffer
[     4.233] (II) Loading sub module "shadow"
[     4.233] (II) LoadModule: "shadow"
[     4.233] (II) Loading /usr/lib/xorg/modules/libshadow.so
[     4.234] (II) Module shadow: vendor="X.Org Foundation"
[     4.234]  compiled for 1.20.8, module version = 1.1.0
[     4.234]  ABI class: X.Org ANSI C Emulation, version 0.4
[     4.234] (II) FBDEV(0): FBIOBLANK: Invalid argument (Screen blanking not supported by kernel - disabling)
[     4.235] (==) FBDEV(0): Backing store enabled
[     4.237] (==) FBDEV(0): DPMS enabled
[     4.237] (II) Initializing extension Generic Event Extension
[     4.237] (II) Initializing extension SHAPE
[     4.237] (II) Initializing extension MIT-SHM
[     4.238] (II) Initializing extension XInputExtension
[     4.238] (II) Initializing extension XTEST
[     4.238] (II) Initializing extension BIG-REQUESTS
[     4.239] (II) Initializing extension SYNC
[     4.239] (II) Initializing extension XKEYBOARD
[     4.239] (II) Initializing extension XC-MISC
[     4.239] (II) Initializing extension SECURITY
[     4.240] (II) Initializing extension XFIXES
[     4.240] (II) Initializing extension RENDER
[     4.240] (II) Initializing extension RANDR
[     4.241] (II) Initializing extension COMPOSITE
[     4.241] (II) Initializing extension DAMAGE
[     4.241] (II) Initializing extension MIT-SCREEN-SAVER
[     4.242] (II) Initializing extension DOUBLE-BUFFER
[     4.242] (II) Initializing extension RECORD
[     4.242] (II) Initializing extension DPMS
[     4.242] (II) Initializing extension Present
[     4.243] (II) Initializing extension DRI3
[     4.243] (II) Initializing extension X-Resource
[     4.243] (II) Initializing extension XVideo
[     4.243] (II) Initializing extension XVideo-MotionCompensation
[     4.243] (II) Initializing extension SELinux
[     4.243] (II) SELinux: Disabled on system
[     4.243] (II) Initializing extension GLX
[     4.244] (II) AIGLX: Screen 0 is not DRI2 capable
[     4.370] (II) IGLX: Loaded and initialized swrast
[     4.370] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[     4.370] (II) Initializing extension XFree86-VidModeExtension
[     4.370] (II) Initializing extension XFree86-DGA
[     4.370] (II) Initializing extension XFree86-DRI
[     4.370] (II) Initializing extension DRI2
[     4.419] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[     4.419] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     4.419] (II) LoadModule: "libinput"
[     4.419] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[     4.421] (II) Module libinput: vendor="X.Org Foundation"
[     4.421]  compiled for 1.20.8, module version = 0.30.0
[     4.421]  Module class: X.Org XInput Driver
[     4.421]  ABI class: X.Org XInput driver, version 24.1
[     4.421] (II) Using input driver 'libinput' for 'Power Button'
[     4.421] (**) Power Button: always reports core events
[     4.421] (**) Option "Device" "/dev/input/event4"
[     4.421] (**) Option "_source" "server/udev"
[     4.426] (II) event4  - Power Button: is tagged by udev as: Keyboard
[     4.426] (II) event4  - Power Button: device is a keyboard
[     4.426] (II) event4  - Power Button: device removed
[     4.454] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event4"
[     4.454] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     4.454] (**) Option "xkb_model" "pc105"
[     4.454] (**) Option "xkb_layout" "fr"
[     4.454] (**) Option "xkb_variant" "latin9"
[     4.484] (II) event4  - Power Button: is tagged by udev as: Keyboard
[     4.484] (II) event4  - Power Button: device is a keyboard
[     4.485] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[     4.485] (II) No input driver specified, ignoring this device.
[     4.485] (II) This device may have been added with another device file.
[     4.485] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[     4.485] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     4.485] (II) Using input driver 'libinput' for 'Power Button'
[     4.485] (**) Power Button: always reports core events
[     4.485] (**) Option "Device" "/dev/input/event3"
[     4.485] (**) Option "_source" "server/udev"
[     4.487] (II) event3  - Power Button: is tagged by udev as: Keyboard
[     4.487] (II) event3  - Power Button: device is a keyboard
[     4.487] (II) event3  - Power Button: device removed
[     4.514] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4/event3"
[     4.514] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[     4.514] (**) Option "xkb_model" "pc105"
[     4.514] (**) Option "xkb_layout" "fr"
[     4.514] (**) Option "xkb_variant" "latin9"
[     4.517] (II) event3  - Power Button: is tagged by udev as: Keyboard
[     4.517] (II) event3  - Power Button: device is a keyboard
[     4.519] (II) config/udev: Adding input device USB2.0 HD UVC WebCam: USB2.0 HD (/dev/input/event8)
[     4.519] (**) USB2.0 HD UVC WebCam: USB2.0 HD: Applying InputClass "libinput keyboard catchall"
[     4.520] (II) Using input driver 'libinput' for 'USB2.0 HD UVC WebCam: USB2.0 HD'
[     4.520] (**) USB2.0 HD UVC WebCam: USB2.0 HD: always reports core events
[     4.520] (**) Option "Device" "/dev/input/event8"
[     4.520] (**) Option "_source" "server/udev"
[     4.523] (II) event8  - USB2.0 HD UVC WebCam: USB2.0 HD: is tagged by udev as: Keyboard
[     4.523] (II) event8  - USB2.0 HD UVC WebCam: USB2.0 HD: device is a keyboard
[     4.524] (II) event8  - USB2.0 HD UVC WebCam: USB2.0 HD: device removed
[     4.590] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input10/event8"
[     4.590] (II) XINPUT: Adding extended input device "USB2.0 HD UVC WebCam: USB2.0 HD" (type: KEYBOARD, id 8)
[     4.590] (**) Option "xkb_model" "pc105"
[     4.590] (**) Option "xkb_layout" "fr"
[     4.590] (**) Option "xkb_variant" "latin9"
[     4.594] (II) event8  - USB2.0 HD UVC WebCam: USB2.0 HD: is tagged by udev as: Keyboard
[     4.595] (II) event8  - USB2.0 HD UVC WebCam: USB2.0 HD: device is a keyboard
[     4.597] (II) config/udev: Adding input device ELAN1301:00 04F3:30C6 Mouse (/dev/input/event6)
[     4.597] (**) ELAN1301:00 04F3:30C6 Mouse: Applying InputClass "libinput pointer catchall"
[     4.597] (II) Using input driver 'libinput' for 'ELAN1301:00 04F3:30C6 Mouse'
[     4.597] (**) ELAN1301:00 04F3:30C6 Mouse: always reports core events
[     4.597] (**) Option "Device" "/dev/input/event6"
[     4.597] (**) Option "_source" "server/udev"
[     4.601] (II) event6  - ELAN1301:00 04F3:30C6 Mouse: is tagged by udev as: Mouse Pointingstick
[     4.602] (II) event6  - ELAN1301:00 04F3:30C6 Mouse: device is a pointer
[     4.603] (II) event6  - ELAN1301:00 04F3:30C6 Mouse: device removed
[     4.666] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-ELAN1301:00/0018:04F3:30C6.0001/input/input8/event6"
[     4.666] (II) XINPUT: Adding extended input device "ELAN1301:00 04F3:30C6 Mouse" (type: MOUSE, id 9)
[     4.666] (**) Option "AccelerationScheme" "none"
[     4.666] (**) ELAN1301:00 04F3:30C6 Mouse: (accel) selected scheme none/0
[     4.666] (**) ELAN1301:00 04F3:30C6 Mouse: (accel) acceleration factor: 2.000
[     4.666] (**) ELAN1301:00 04F3:30C6 Mouse: (accel) acceleration threshold: 4
[     4.670] (II) event6  - ELAN1301:00 04F3:30C6 Mouse: is tagged by udev as: Mouse Pointingstick
[     4.671] (II) event6  - ELAN1301:00 04F3:30C6 Mouse: device is a pointer
[     4.674] (II) config/udev: Adding input device ELAN1301:00 04F3:30C6 Mouse (/dev/input/mouse0)
[     4.674] (II) No input driver specified, ignoring this device.
[     4.674] (II) This device may have been added with another device file.
[     4.675] (II) config/udev: Adding input device ELAN1301:00 04F3:30C6 Touchpad (/dev/input/event7)
[     4.675] (**) ELAN1301:00 04F3:30C6 Touchpad: Applying InputClass "libinput touchpad catchall"
[     4.675] (II) Using input driver 'libinput' for 'ELAN1301:00 04F3:30C6 Touchpad'
[     4.675] (**) ELAN1301:00 04F3:30C6 Touchpad: always reports core events
[     4.675] (**) Option "Device" "/dev/input/event7"
[     4.675] (**) Option "_source" "server/udev"
[     4.679] (II) event7  - ELAN1301:00 04F3:30C6 Touchpad: is tagged by udev as: Touchpad
[     4.684] (II) event7  - ELAN1301:00 04F3:30C6 Touchpad: device is a touchpad
[     4.684] (II) event7  - ELAN1301:00 04F3:30C6 Touchpad: device removed
[     4.735] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-ELAN1301:00/0018:04F3:30C6.0001/input/input9/event7"
[     4.735] (II) XINPUT: Adding extended input device "ELAN1301:00 04F3:30C6 Touchpad" (type: TOUCHPAD, id 10)
[     4.739] (**) Option "AccelerationScheme" "none"
[     4.740] (**) ELAN1301:00 04F3:30C6 Touchpad: (accel) selected scheme none/0
[     4.740] (**) ELAN1301:00 04F3:30C6 Touchpad: (accel) acceleration factor: 2.000
[     4.740] (**) ELAN1301:00 04F3:30C6 Touchpad: (accel) acceleration threshold: 4
[     4.744] (II) event7  - ELAN1301:00 04F3:30C6 Touchpad: is tagged by udev as: Touchpad
[     4.748] (II) event7  - ELAN1301:00 04F3:30C6 Touchpad: device is a touchpad
[     4.750] (II) config/udev: Adding input device ELAN1301:00 04F3:30C6 Touchpad (/dev/input/mouse1)
[     4.751] (II) No input driver specified, ignoring this device.
[     4.751] (II) This device may have been added with another device file.
[     4.752] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event1)
[     4.752] (**) Asus WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[     4.752] (II) Using input driver 'libinput' for 'Asus WMI hotkeys'
[     4.752] (**) Asus WMI hotkeys: always reports core events
[     4.752] (**) Option "Device" "/dev/input/event1"
[     4.752] (**) Option "_source" "server/udev"
[     4.754] (II) event1  - Asus WMI hotkeys: is tagged by udev as: Keyboard
[     4.755] (II) event1  - Asus WMI hotkeys: device is a keyboard
[     4.755] (II) event1  - Asus WMI hotkeys: device removed
[     4.802] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input7/event1"
[     4.802] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 11)
[     4.802] (**) Option "xkb_model" "pc105"
[     4.802] (**) Option "xkb_layout" "fr"
[     4.802] (**) Option "xkb_variant" "latin9"
[     4.805] (II) event1  - Asus WMI hotkeys: is tagged by udev as: Keyboard
[     4.805] (II) event1  - Asus WMI hotkeys: device is a keyboard
[     4.808] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[     4.808] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[     4.808] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[     4.808] (**) AT Translated Set 2 keyboard: always reports core events
[     4.808] (**) Option "Device" "/dev/input/event0"
[     4.808] (**) Option "_source" "server/udev"
[     4.811] (II) event0  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[     4.811] (II) event0  - AT Translated Set 2 keyboard: device is a keyboard
[     4.813] (II) event0  - AT Translated Set 2 keyboard: device removed
[     4.842] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[     4.842] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[     4.842] (**) Option "xkb_model" "pc105"
[     4.842] (**) Option "xkb_layout" "fr"
[     4.842] (**) Option "xkb_variant" "latin9"
[     4.846] (II) event0  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[     4.846] (II) event0  - AT Translated Set 2 keyboard: device is a keyboard
[     4.850] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[     4.850] (II) No input driver specified, ignoring this device.
[     4.850] (II) This device may have been added with another device file.
[    65.146] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event10)
[    65.146] (II) No input driver specified, ignoring this device.
[    65.146] (II) This device may have been added with another device file.
[    65.147] (II) config/udev: Adding input device HDA Intel PCH Headset Mic (/dev/input/event9)
[    65.147] (II) No input driver specified, ignoring this device.
[    65.147] (II) This device may have been added with another device file.
[    82.673] (II) config/udev: Adding input device C&T EarPods_TC01_K9I (/dev/input/event11)
[    82.673] (**) C&T EarPods_TC01_K9I: Applying InputClass "libinput keyboard catchall"
[    82.673] (II) Using input driver 'libinput' for 'C&T EarPods_TC01_K9I'
[    82.673] (**) C&T EarPods_TC01_K9I: always reports core events
[    82.673] (**) Option "Device" "/dev/input/event11"
[    82.673] (**) Option "_source" "server/udev"
[    82.674] (II) event11 - C&T EarPods_TC01_K9I: is tagged by udev as: Keyboard
[    82.674] (II) event11 - C&T EarPods_TC01_K9I: device is a keyboard
[    82.675] (II) event11 - C&T EarPods_TC01_K9I: device removed
[    82.741] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2.2/1-1.2.2:1.3/0003:2000:DD00.0002/input/input13/event11"
[    82.741] (II) XINPUT: Adding extended input device "C&T EarPods_TC01_K9I" (type: KEYBOARD, id 13)
[    82.741] (**) Option "xkb_model" "pc105"
[    82.741] (**) Option "xkb_layout" "fr"
[    82.741] (**) Option "xkb_variant" "latin9"
[    82.741] (WW) Option "xkb_options" requires a string value
[    82.744] (II) event11 - C&T EarPods_TC01_K9I: is tagged by udev as: Keyboard
[    82.744] (II) event11 - C&T EarPods_TC01_K9I: device is a keyboard
[    82.745] (EE) event7  - ELAN1301:00 04F3:30C6 Touchpad: client bug: event processing lagging behind by 66ms, your system is too slow



Tous les firmawares sont OK même avec realtek et non realteck ! kernal_panic.gif

Pour attirer les foules dans cette file, il faut peut-être parlé oenologie big_smile
car mes serveurs, et portables ont tous des noms de cépages ! mon Asus c'est du Pommard big_smile

#14 Re : Matériel » [Fermé] Impossible d'installer Debian 10.6 sur Asus Zenbook UX431 » 02-11-2020 16:10:58

NormandiePi
Robert,
voici le résultat:

remove plymouth:

root@pommard:/home/thomas# apt-get remove --purge plymouth* libplymouth4
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances      
Lecture des informations d'état... Fait
Note : sélection de plymouth-themes pour l'expression rationnelle « plymouth* »
Note : sélection de plymouth-theme pour l'expression rationnelle « plymouth* »
Note : sélection de plymouth-label pour l'expression rationnelle « plymouth* »
Note : sélection de plymouth-themes-script pour l'expression rationnelle « plymouth* »
Note : sélection de plymouth-themes-spinfinity pour l'expression rationnelle « plymouth* »
Note : sélection de plymouth-themes-solar pour l'expression rationnelle « plymouth* »
Note : sélection de plymouth-dev pour l'expression rationnelle « plymouth* »
Note : sélection de plymouth-drm pour l'expression rationnelle « plymouth* »
Note : sélection de plymouth-themes-all pour l'expression rationnelle « plymouth* »
Note : sélection de plymouth-themes-glow pour l'expression rationnelle « plymouth* »
Note : sélection de plymouth-theme-hamara pour l'expression rationnelle « plymouth* »
Note : sélection de plymouth-themes-fade-in pour l'expression rationnelle « plymouth* »
Note : sélection de plymouth pour l'expression rationnelle « plymouth* »
Note : sélection de plymouth-themes-spinner pour l'expression rationnelle « plymouth* »
Note : sélection de plymouth-theme-breeze pour l'expression rationnelle « plymouth* »
Note : sélection de plymouth-x11 pour l'expression rationnelle « plymouth* »
Le paquet « plymouth-dev » n'est pas installé, et ne peut donc être supprimé
Le paquet « plymouth-drm » n'est pas installé, et ne peut donc être supprimé
Note : sélection de « plymouth-themes » au lieu de « plymouth-themes-all »
Note : sélection de « plymouth-themes » au lieu de « plymouth-themes-fade-in »
Note : sélection de « plymouth-themes » au lieu de « plymouth-themes-glow »
Note : sélection de « plymouth-themes » au lieu de « plymouth-themes-script »
Note : sélection de « plymouth-themes » au lieu de « plymouth-themes-solar »
Note : sélection de « plymouth-themes » au lieu de « plymouth-themes-spinfinity »
Note : sélection de « plymouth-themes » au lieu de « plymouth-themes-spinner »
Le paquet « plymouth-theme-breeze » n'est pas installé, et ne peut donc être supprimé
Le paquet « plymouth-themes » n'est pas installé, et ne peut donc être supprimé
Le paquet « plymouth-x11 » n'est pas installé, et ne peut donc être supprimé
Le paquet « plymouth-theme-hamara » n'est pas installé, et ne peut donc être supprimé
Les paquets suivants seront ENLEVÉS :
  libplymouth4* plymouth* plymouth-label*
0 mis à jour, 0 nouvellement installés, 3 à enlever et 0 non mis à jour.
Après cette opération, 862 ko d'espace disque seront libérés.
Souhaitez-vous continuer ? [O/n] o
(Lecture de la base de données... 106964 fichiers et répertoires déjà installés.)
Suppression de plymouth-label (0.9.4-3) ...
Suppression de plymouth (0.9.4-3) ...
update-initramfs: deferring update (trigger activated)
Suppression de libplymouth4:amd64 (0.9.4-3) ...
Traitement des actions différées (« triggers ») pour libc-bin (2.31-4) ...
Traitement des actions différées (« triggers ») pour man-db (2.9.3-2) ...
Traitement des actions différées (« triggers ») pour initramfs-tools (0.139) ...
update-initramfs: Generating /boot/initrd.img-5.9.0-1-amd64
(Lecture de la base de données... 106872 fichiers et répertoires déjà installés.)
Purge des fichiers de configuration de plymouth (0.9.4-3) ...
Traitement des actions différées (« triggers ») pour systemd (246.6-2) ...
 



lusb:

Bus 002 Device 003: ID 0bda:8153 Realtek Semiconductor Corp. RTL8153 Gigabit Ethernet Adapter
Bus 002 Device 002: ID 1d5c:5002 Fresco Logic USB3.0 Hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 002: ID 13d3:56d3 IMC Networks USB2.0 HD UVC WebCam
Bus 001 Device 003: ID 8087:0aaa Intel Corp. Bluetooth 9460/9560 Jefferson Peak (JfP)
Bus 001 Device 006: ID 2000:dd00 CMX Systems
Bus 001 Device 005: ID 1a40:0801 Terminus Technology Inc.
Bus 001 Device 004: ID 1d5c:5012 Fresco Logic USB2.0 Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
 



cat /etc/apt/sources.list :

#

# deb cdrom:[Debian GNU/Linux testing _Bullseye_ - Official Snapshot amd64 NETINST 20201026-03:36]/ bullseye main

#deb cdrom:[Debian GNU/Linux testing _Bullseye_ - Official Snapshot amd64 NETINST 20201026-03:36]/ bullseye main

#deb http://deb.debian.org/debian/ bullseye main
#deb-src http://deb.debian.org/debian/ bullseye main

deb http://deb.debian.org/debian-security bullseye-security/updates main contrib non-free
deb http://deb.debian.org/debian/ bullseye-updates main contrib non-free
deb http://deb.debian.org/debian/ bullseye main contrib non-free

#deb http://security.debian.org/debian-security bullseye-security main
#deb-src http://security.debian.org/debian-security bullseye-security main

# This system was installed using small removable media
# (e.g. netinst, live or single CD). The matching "deb cdrom"
# entries were disabled at the end of the installation process.
# For information about how to configure apt package sources,
# see the sources.list(5) manual.
 


journalctl:

root@pommard:/home/thomas# journalctl -r -p err
-- Logs begin at Mon 2020-11-02 11:02:15 CET, end at Mon 2020-11-02 16:06:10>
nov. 02 16:06:10 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:06:05 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:06:01 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:05:57 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:05:53 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:05:48 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:05:44 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:05:40 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:05:35 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:05:31 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:05:27 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:05:23 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:05:18 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:05:14 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:05:10 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:05:05 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:05:01 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:04:57 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:04:52 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:04:48 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:04:44 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:04:40 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:04:35 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:04:31 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:04:27 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:04:22 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:04:18 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:04:14 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:04:09 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:04:05 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:04:01 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:03:57 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:03:52 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:03:48 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:03:44 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:03:39 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:03:35 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:03:31 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:03:26 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:03:22 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:03:18 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:03:14 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:03:09 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:03:05 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:03:01 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:02:56 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:02:52 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:02:48 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:02:43 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:02:39 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:02:35 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:02:31 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:02:26 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:02:22 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:02:18 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:02:13 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:02:09 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:02:05 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:02:01 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:01:56 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:01:52 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:01:48 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:01:43 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:01:39 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:01:35 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:01:30 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:01:26 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:01:22 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:01:18 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:01:13 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:01:09 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:01:05 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:01:00 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:00:56 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:00:52 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:00:47 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:00:43 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:00:39 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:00:35 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:00:30 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:00:26 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:00:22 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:00:17 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:00:13 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:00:09 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:00:04 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 16:00:00 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:59:56 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:59:52 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:59:47 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:59:43 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:59:39 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:59:34 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:59:30 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:59:26 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:59:21 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:59:17 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:59:13 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:59:09 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:59:04 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:59:00 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:58:56 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:58:51 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:58:47 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:58:43 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:58:38 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:58:34 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:58:30 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:58:26 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:58:21 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:58:17 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:58:13 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:58:08 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:58:04 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:58:00 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:57:56 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:57:51 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:57:47 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:57:43 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:57:38 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:57:34 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:57:30 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:57:25 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:57:21 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:57:17 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:57:13 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:57:08 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:57:04 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:57:00 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:56:55 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:56:51 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:56:47 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:56:42 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:56:38 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:56:34 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:56:30 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:56:25 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:56:21 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:56:17 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:56:12 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:56:08 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:56:04 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:55:59 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:55:55 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:55:51 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:55:47 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:55:42 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:55:38 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:55:34 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:55:29 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:55:25 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:55:21 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:55:16 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:55:12 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:55:08 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:55:04 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:54:59 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:54:55 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:54:51 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:54:46 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:54:42 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:54:38 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:54:33 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:54:29 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:54:25 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:54:21 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:54:16 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:54:12 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:54:08 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:54:03 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:53:59 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:53:55 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:53:51 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:53:46 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:53:42 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:53:38 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:53:33 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:53:29 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:53:25 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:53:20 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:53:16 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:53:12 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:53:08 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:53:03 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:52:59 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:52:55 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:52:50 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:52:46 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:52:42 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:52:37 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:52:33 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:52:29 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:52:25 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:52:20 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:52:16 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:52:12 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:52:07 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:52:03 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:51:59 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:51:54 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:51:50 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:51:46 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:51:42 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:51:37 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:51:33 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:51:29 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:51:24 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:51:20 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:51:16 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:51:12 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:51:07 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:51:03 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:50:59 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:50:54 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:50:50 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:50:46 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:50:41 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:50:37 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:50:32 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:50:28 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:50:24 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:50:20 pommard kernel: r8152 2-1.1:1.0: firmware: failed to load r>
nov. 02 15:50:19 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:50:15 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:50:15 pommard kernel: hdaudio hdaudioC0D2: Unable to bind the cod>
nov. 02 15:50:11 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:50:07 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:50:03 pommard kernel: usb usb2-port2: Cannot enable. Maybe the US>
nov. 02 15:49:24 pommard lightdm[723]: gkr-pam: unable to locate daemon cont>
nov. 02 15:49:13 pommard bluetoothd[572]: sap-server: Operation not permitte>
nov. 02 15:49:13 pommard bluetoothd[572]: profiles/sap/server.c:sap_server_r>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: check git://git.kerne>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: maximum version suppo>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: minimum version requi>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:49:13 pommard kernel: firmware_class: See https://wiki.debian.org>
nov. 02 15:49:13 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:49:13 pommard kernel: i2c i2c-1: failed to add I2C device XXXX000>
nov. 02 15:49:13 pommard kernel: i2c i2c-1: Failed to register i2c client XX>
nov. 02 15:49:13 pommard kernel: i2c i2c-1: failed to add I2C device XXXX000>
nov. 02 15:49:13 pommard kernel: i2c i2c-1: Failed to register i2c client XX>
nov. 02 15:49:13 pommard kernel: i2c i2c-1: failed to add I2C device XXXX000>
nov. 02 15:49:13 pommard kernel: i2c i2c-1: Failed to register i2c client XX>
-- Reboot --
nov. 02 15:48:47 pommard kernel: Bluetooth: hci0: setting interface failed (>
nov. 02 15:48:35 pommard bluetoothd[554]: Failed to set privacy: Rejected (0>
nov. 02 15:48:35 pommard bluetoothd[554]: sap-server: Operation not permitte>
nov. 02 15:48:35 pommard bluetoothd[554]: profiles/sap/server.c:sap_server_r>
nov. 02 15:48:34 pommard kernel: Bluetooth: hci0: Retrieving Intel exception>
nov. 02 15:48:34 pommard kernel: Bluetooth: hci0: Hardware error 0x0a
nov. 02 15:48:34 pommard kernel: iwlwifi 0000:00:14.3: check git://git.kerne>
nov. 02 15:48:34 pommard kernel: iwlwifi 0000:00:14.3: maximum version suppo>
nov. 02 15:48:34 pommard kernel: iwlwifi 0000:00:14.3: minimum version requi>
nov. 02 15:48:34 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:48:34 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:48:34 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:48:34 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:48:34 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:48:34 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:48:34 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:48:34 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:48:34 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:48:34 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:48:34 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:48:34 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:48:34 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:48:34 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:48:34 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:48:34 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:48:34 pommard kernel: iwlwifi 0000:00:14.3: firmware: failed to l>
nov. 02 15:48:34 pommard kernel: i2c i2c-1: failed to add I2C device XXXX000>
nov. 02 15:48:34 pommard kernel: i2c i2c-1: Failed to register i2c client XX>
nov. 02 15:48:34 pommard kernel: i2c i2c-1: failed to add I2C device XXXX000>
nov. 02 15:48:34 pommard kernel: i2c i2c-1: Failed to register i2c client XX>
nov. 02 15:48:34 pommard kernel: i2c i2c-1: failed to add I2C device XXXX000>
nov. 02 15:48:34 pommard kernel: i2c i2c-1: Failed to register i2c client XX>
nov. 02 15:48:34 pommard kernel: firmware_class: See https://wiki.debian.org>
nov. 02 15:48:34 pommard kernel: i915 0000:00:02.0: firmware: failed to load>
-- Reboot --
 


et j'ai fait un reinstall des paquets dont realtek (bien orthographié big_smile)
je fais refaire un reboot avec le dock débranché, avec nomodeset=1

MAJ 17h14
reboot fait.
Si je boote sans nomodeset=1, j'ai un écran noir donc pas le GUI de login Xfce
J'ai donc fait un boot avec nomodeset=1 et le dock débranché, j'arrive à me connecter.
Le changement, la carte Wifi fonctionne.
J'ai pu me connecter à mon réseau Wifi.
Si je branche le dock, le réseau filaire est détectée comme avant.

ça change la vie d'avoir un GUI pour poster les logs dans le forum. Car avant je devais faire des photos de l'écran avec mon smartphone.

la carte audio fonctionne. J'ai le son de mon portable! youpi.
par contre si je branche une enceinte sur mon dock, le son ne sort pas par l'enceinte mais uniquement par les haut-parleurs de mon portable.

#15 Re : Matériel » [Fermé] Impossible d'installer Debian 10.6 sur Asus Zenbook UX431 » 02-11-2020 13:07:18

NormandiePi
J'ai mis à jour le sources.list que tu m'avais donné.
résultat:

root@pommard:/home/thomas# apt update
Réception de :1 http://deb.debian.org/debian-security bullseye-security/updates InRelease [44,1 kB]
Réception de :2 http://deb.debian.org/debian bullseye-updates InRelease [38,8 kB]
Atteint :3 http://deb.debian.org/debian bullseye InRelease
Réception de :4 http://deb.debian.org/debian bullseye/contrib amd64 Packages [48,6 kB]
Réception de :5 http://deb.debian.org/debian bullseye/contrib Translation-en [44,8 kB]
Réception de :6 http://deb.debian.org/debian bullseye/non-free amd64 Packages [95,2 kB]
Réception de :7 http://deb.debian.org/debian bullseye/non-free Translation-en [90,4 kB]
362 ko réceptionnés en 1s (321 ko/s)                                    
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances      
Lecture des informations d'état... Fait
Tous les paquets sont à jour.
root@pommard:/home/thomas# apt-get --reinstall install firmware-misc-nonfree firmware-iwlwifi intel-microcode firmware-realteck
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances      
Lecture des informations d'état... Fait
E: Impossible de trouver le paquet firmware-realteck
 

#16 Re : Matériel » [Fermé] Impossible d'installer Debian 10.6 sur Asus Zenbook UX431 » 02-11-2020 11:52:01

NormandiePi
Bonjour,
Petit résumé car j'en suis à pléthore d'install depuis ce matin (6 déjà) dans l'objectif est de pouvoir avoir la 10.6 Xfce sur mon portable Zenbook. J'essaie de faire court et aussi permet à ceux qui lisent cette réponse de ne pas avoir à reprendre la fil depuis le début.

1. La 10.6 Xfce n'est pas compatible avec l'UX431 car problème à minima avec le Wifi, le Bluetooth et la carte audio.
L'installation se passe sans souci en mode graphique mais il m'a été impossible de la lancer au boot avec Grub.
En faisant toutes les combinaisons possible:
- Grub sélection Debian,
- Grub sélection Debian recovery
- Grub avec nomodeset=1
et en branchant/débranchant le dock USB3-c qui me permet d'avoir le réseau filaire.
NB1: C'est ce dock le souci principal.
NB2: installation faite avec ce dock branché mais sans choisir de miroir pendant l'install.
Donc je la laisse tombe. Passons à la suite.

2. Installation de la Bullseye testing en mode graphique.
Le dock USB3-C est branché.
Elle plante à l'écran "détection du matériel réseau": l'écran est figé. J'ai attendu 10minutes dès fois que ...
Donc je la laisse tombe. Passons à la suite.
J'ai fait aussi le test pour installer la "testing" avec le dock non-branché mais j'arrive bien à booter Grub et avoir le prompt mais après je n'ai pas réussi à installer le firmware car n'ayant pas de réseaux sans ce dock !!!! wink

3. Installation de la Bullseye testing en mode normal.
Le dock USB3-C est branché.
L'installation est Ok et je sélectionne le miroir debian.org. il récupère 6 paquets. il me signale qu'il a besoin de:

iwlwifi-9000-pu-b0-jf-43.ucode
jusqu'à
iwlwifi-9000-pu-b0-jf-31.ucode
et
rtl_nic/rtl18153a-4.fw
 


A la fin de l'installation je demande à mettre Xfce.
L'installation se finis sans souci.
reboot avec Grub.
Le seul moyen qui fonctionne:
1.mettre nomodeset=1 dans le Grub avant quiet
2 et débrancher le dock USB3-c

Une fois connecter et que le bureau Xfce est là, je branche le dock, il me détecte le réseau et je peux surfer. j'écris donc avec Firefox sur la debian Bullseye testing que je viens d'installer !!! grand luxe winkcool:cool:   
Mais je suis en 800x600 , c'est mieux que rien.

Voici ce que j'ai dans dmesg:

[ 2621.381266] usb usb2-port2: Cannot enable. Maybe the USB cable is bad?
 



Merci encore Robert. Grâce à ton analyse on avance.
C'est ma femme qui ralle car ne comprend pas pourquoi je serai le seul à avoir des pb avec l'ordi roll:rolleyes:
Bonne journée,
Tom

#17 Re : Matériel » [Fermé] Impossible d'installer Debian 10.6 sur Asus Zenbook UX431 » 01-11-2020 11:54:58

NormandiePi

anonyme a écrit :

bon la priorité il me semble c'est le réseau
tu va faire la commande suivante mais il me faut le nom de la carte filaire


ip address
 


pour moi ça retourne


ip address
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: enp5s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
    link/ether 10:7b:44:92:13:7d brd ff:ff:ff:ff:ff:ff
    inet 192.168.1.102/24 brd 192.168.1.255 scope global dynamic enp5s0
       valid_lft 58097sec preferred_lft 58097sec
    inet6 2a01:cb1c:dce:900:127b:44ff:fe92:137d/64 scope global dynamic mngtmpaddr
       valid_lft 1763sec preferred_lft 563sec
    inet6 fe80::127b:44ff:fe92:137d/64 scope link
       valid_lft forever preferred_lft forever
 



ma carte réseau porte le nom "enp5s0"

ensuite vérifier que c'est le même sur ce fichier


nano /etc/network/interfaces
 


et tu le modifie avec le bon nom
pour moi


# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

source /etc/network/interfaces.d/*

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
allow-hotplug enp5s0
iface enp5s0 inet dhcp
# This is an autoconfigured IPv6 interface
iface enp5s0 inet6 auto
 


J'ai du réseau, dans ip address je vois:
192.168.1.46
et ma carte ethernet à travers le port USB-C du dock : enx00e04c68000f
et j'ai fait un test de débrancher le dock puis le rebrancher.
J'ai eu le message:

r8152 2-1.1:1.0: firware: fail to load rtlnic/rt18153a-4.fw (-2)


anonyme a écrit :


pour les retours tu est pas très précis  hmm  , il me semble que cela doit se voir que tu n'a pas de réseau  ? ( j(espère que tu est en filaire )


Oui je suis en filaire. LE wifi fonctionne mal avec des murs en pierre maconnés de 50cm d'épaisseur !

anonyme a écrit :


pour le dock tu peu le virer pour la mise au point ?


ah mais si je le vire, je n'ai plus de réseau filaire car le doc me sert pour mon RJ45. Ce portable Asus n'a pas de port RJ45
Le dock est un Berserker Gaming modèle AD-BSK-TYR-USB-C-10EN1


anonyme a écrit :


pour les firmwares il y a une modification ça devient :(quand tu aura le réseau )


apt install firmware-misc-nonfree firmware-iwlwifi intel-microcode
 


Pour ces 3 paquets: j'ai le message:

Aucune version du paquet n'est disponible mais il existe dans la base de données. Cela signifie en général que le paquet est manquant.
et Aucune version n'est succeptible d'être installée


Peut-etre que ma base de source est écrasée car j'avais mis ce que tu m'avais proposé précédemment avec le non free.
En fin de journée j'aurai plus de temps et je regarderai ça en détail.

#18 Re : Matériel » [Fermé] Impossible d'installer Debian 10.6 sur Asus Zenbook UX431 » 01-11-2020 00:11:06

NormandiePi
Voici le retour.

anonyme a écrit :

Bonjour
maintenant il faut faire le point sur ce qui ne pas
commencer par mettre permanent "nomodeset=1" (on le retirera plus tard )


nano /etc/default/grub
 



tu modifie la ligne


GRUB_CMDLINE_LINUX_DEFAULT="nomodeset=1 quiet"
 



Ok fait.

anonyme a écrit :


et un update-grub


update-grub
 


c'est KO.
j'ai dû modifier update-grub et mettre le chemin complet dans le fichier car grub-mkconfig il ne le trouvait pas

anonyme a écrit :


deuxième chose mettre a jour ton sources.list
il doit ressembler a celui la


#bullseye11 http
deb http://deb.debian.org/debian-security bullseye-security/updates main contrib non-free
deb http://deb.debian.org/debian/ bullseye-updates main contrib non-free
deb http://deb.debian.org/debian/ bullseye main contrib non-free
 


Mon fichier sources.list ne contenait pas non-free
J'ai donc ajouté les 3 lignes que tu proposes.

anonyme a écrit :


un update


apt update
 


et


apt upgrade
 


Fait mais aucun paquet na été téléchargé ou mis à jour.
Aussi, je dois jongler avec le dock que je débranche pour ne pas avoir d'erreur usb2 sur l'écran sauf quand je fais l'update
Voici les erreurs dans le journal au lancement:
https://imgur.com/a/VhzPoQ8
https://imgur.com/a/pZPwOqR

anonyme a écrit :


si tu a trop de soucis en console pure on peu tenter de mettre xfce4 comme bureau avec lightdm et toujours l'option "nomodeset=1" dans grub (tu sera en vesa le bureau va pas être terrible )
la première chose a mettre c'est le "firmware-misc-nonfree" pour ton gpu intel


apt install firmware-misc-nonfree
 


fait mais rien n'a été mis à jour.


anonyme a écrit :


maintenant que cela est fait un lspci


lspci
 


moi ce qui m' intéresse c'est combien de gpu sur cette machine
normalement la ligne commence par vga ou 3D


voici le résultat:
https://imgur.com/a/2mylh1R

Je ne suis pas allé plus loin.

#19 Re : Matériel » [Fermé] Impossible d'installer Debian 10.6 sur Asus Zenbook UX431 » 31-10-2020 10:19:30

NormandiePi
Bonjour Robert,

Merci pour tes détails.
J'ai bien avancé grâce à tes indications.

anonyme a écrit :

tester stretch inutile


OK mais mon idée était que dans le noyau 5.9.0.1 il y avait une régression c'est pour cela que j'ai tenté une stretch
Bilan: ce n'est pas ça.

anonyme a écrit :


quand l'installation de testing a réussi au reboot entrer dans grub (avec la touche E il me semble) et modifier la ligne comme ceci


GRUB_CMDLINE_LINUX_DEFAULT="nomodeset=1 quiet"
 


et donner le résultat


Nickel, j'ai mis nomodeset=1 avant quiet
Et je sauve  avec F10 qui lance le boot.
Bilan: J'arrive au prompt avec login.
Je me connecte avec mon user.
Et OK je suis connecté.
J'ai 2 lignes de logs qui apparaisent:


usb2-port2: cannont enable. May be the USB cable is bad.
 


C'est mon dock USB "Berserker gaming" qui est compatible Linux (sans préciser avec quel noyau dans leur doc)
Je l'ai débranché mais grâce au dock, l'install a pu récupérer la liste des paquets APT et faire l'installation netinst en se connectant au miroir.
J'ai aussi:


hdaudio.... Unable to bind the codec
 


Le prompt est OK, mais le touchpad ne fonctionne pas.
Je voulais copier ce qu'il y avait à l'écran mais cela n'a pas fonctionné pour tout coller dans un fichier avec vi et vous le mettre ici.

La suite plus bas.

Pour ton autre commentaire:

anonyme a écrit :


modif: au dessus c'est a partir de /etc/default/grub  (permanent )
la ligne est différente , a partir du menu de grub tu fais "e" pour entrer puis la 3eme ligne a partir du bas qui commence par "linux" et finit par "quiet"
tu ajoute nomodeset=1


linux /boot/vmlinuz/ ........................................... ro nomodeset=1 quiet
 


puis F10 pour démarrer (je sais plus si "nomodeset" ou "nomodeset=1" )
cela doit dire au noyau de ne pas configurer le gpu (KMS) au démarrage , tu dois arriver a une invite de connexion en console pure (si c'est bien le gpu qui pose problème )
et en mode vesa (définition de l'écran basique)

ps: tu peu le faire en démarrage normal ou en démarrage de secours (dépannage)  .
la modification est volatile , disparaît au démarrage suivant , pour la mettre permanente modifier le fichier /etc/default/grub


OK compris.

Au bilan:
Je n'ai un souci de dock USB, de Touchpad, de carte audio pour sur.
Pour le Wifi, pendant l'install, j'ai eu l'erreur lors de la détection du matériel. Il me demande de mettre un microcode en plus. chose que je n'ai pas faite car pas bloquant.

A plus tard.
Tom.

#20 Re : Matériel » [Fermé] Impossible d'installer Debian 10.6 sur Asus Zenbook UX431 » 30-10-2020 23:26:55

NormandiePi
bonsoir,
J'ai fait 3 tests de plus dans le but d'avoir un kernel plus ancien.
version 9.9 Netinst  KO, impossible de faire l'install. Au début du lancement après le boot, le load de l'image arrive à un écran noir. Juste le curseur qui clignote !
version 9.4 Netinst  KO, même symptome !
version 9.13 Netinst  KO, même symptome !

#21 Re : Matériel » [Fermé] Impossible d'installer Debian 10.6 sur Asus Zenbook UX431 » 30-10-2020 20:38:17

NormandiePi
Quand je dis que ça crashe, j'ai un écran noir et rien d'autre. Aucune touche ne fonctionne ni la combinaison CTRL Alt F2.

j'ai fait une install en mode expert de la testing netinst avec utilisation du miroir fr.debian.org
Dans les questions finales du process, je désactive le bureau, je configure les mots de passe du root et d'un user en plus, le Grub.

il me détecte bien windows 10.
Lors de l'installation, je vois qu'il installe le noyau 5.9.0.1 !
A la fin de l'installation, je reboote, je sélectionne "debian rescue mode"
et je vois les lignes à l'écran jusqu'à un écran noir.
J'en suis encore au même point.
Le seul test que je n'ai pas pu faire encore, c'est faire une install avec un noyau 5.9.1.1 comme vous l'avez suggéré.
donc affaire à suivre.

#22 Re : Matériel » [Fermé] Impossible d'installer Debian 10.6 sur Asus Zenbook UX431 » 30-10-2020 14:48:47

NormandiePi
Merci Robert.
J'ai fait une install de la testing Netinst.
l'install est Ok. Je n'ai pas utilisé de miroir mais si j'ai le temps je vais refaire une install avec le miroir.
Je reboote et idem, ça crash.
copie d'écran de la dernière ligne j'ai pu attraper !
https://imgur.com/a/etVN80Q

Tom.

#23 Re : Matériel » [Fermé] Impossible d'installer Debian 10.6 sur Asus Zenbook UX431 » 30-10-2020 12:37:13

NormandiePi
Merci pour vos retours.
J'ai refait des install ce matin.

Amd64 10.6.0 Live Minimal KO, impossible de la lancer, elle crashe.
Amd64 10.6.0 Minimal: L'installation se fait sans souci. Je redémarre, le grub est OK. Je sélectionne Debian et ça crashe à nouveau.
Je reboote pour sélectionner dans le Grub : Debian "recovery Mode". Idem, ça crashe.

J'ai tenté une Debian allégée, Sparkylinux. Idem ça crashe.

Bref, ce n'est pas glorieux.

sur un portable Samsung ou j'avais un debian 10.4.0,  j'ai testé. Et là pas de souci. La Xfce s'installe et je peux la lancer.
Donc il y a bien un problème avec le CPU ou sa partie GPU

Espérons qu'il soit corriger dans la 10.7.0
en tout état de cause, je n'ai pas de solution car même les live ne fonctionnent pas. A moins que je passe sur une autre distri, chose que je ne souhaite pas encore car à partmes 2 laptop, j'ai 3 Raspberry, chacun une fonction définie qui tourne sur Raspbian (Debian dédié). Je suis en train de me faire un autre Rapsberry en secours de mon portable Asus qui m'énerve parfois à cause des crashs Win10.

#24 Matériel » [Fermé] Impossible d'installer Debian 10.6 sur Asus Zenbook UX431 » 29-10-2020 14:12:26

NormandiePi
Réponses : 47
Bonjour,

Commençant à être exacerbé par les plantages de Windows10 sur mon portable, j'ai décidé d'ajouter une partition pour installer Debian 10.

C'est un portable Asus:
Intel Core i5-8265U
8 Go
SSD 512 Go
14" LED Full HD Wi-Fi AC/Bluetooth Webcam Windows 10

J'ai installé sans souci le Debian 10.6 XFCE.
le boot est OK.
Et pan, je sélectionne dans le boot: Debian au lieu de Windows.
J'ai à peine le temps d'apercevoir le message: load image.... que j'obtiens un écran noir.
J'ai fait le test avec d'autres versions me disant que XFCE est peut être le souci.
tests KO avec:
Debian 10.6 Amd64 XFCE : KO, écran noir au démarrage
Debian 10.6 Amd64 Live Standard : KO, écran noir au démarrage
Debian 10.6 Amd64 Live Netinst : KO, écran noir au démarrage
Debian 10.6 Amd64 Live KDE: KO, écran noir au démarrage
Debian 10.6 i386 Netinst : KO, écran noir au démarrage

Au démarrage, je choisi de lancer ma Debian initiale en mode "recovery"
Bilan: cf copie d'écran : https://imgur.com/a/hMf0Zm8
hMf0Zm8

Alors le souci semble être lié au disque SSD.
Donc je tente le test Ubuntu 18 LTS Live. Là aussi ça crashe.
Ma crainte, le disque SSD est le problème ou c'est ailleurs?
Avec vous rencontré un tel problème?

J'espère vous avoir donné suffisamment d'éléments pour me débloquer.
NB: j'ai choisi Debian car j'ai des Raspberry sur lesquels j'ai des Raspbian (une Debian light dédiée)
Merci.
Tom.

MAJ: 22/11/20 j'ouvre une autre file car la source du problème est identifiée et cela permet de résumer les échanges d'ici.

Pages : 1

Pied de page des forums

Propulsé par FluxBB