Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#1 Re : Système » POUR GEEKs: modifications répertoires bloquées sur autre partitions » 27-02-2020 11:55:30

smolski a écrit :

clodben a écrit :

ALORS ??


On ne crie pas sur le forum, c'est impoli, c'est inutile, chacun apporte le temps et le savoir qu'il peut, dans le temps qui lui est disponible et qu'il offre à l'entraide sur ce site.

NON MÉ OH !!!!!! tongue



Je pleure de rire et je me tape le cul par terre.
Comme d’habitude tu es parfait smolski,  merci pour ce moment inoubliable. lol lol lol
On ne crie pas sur le forum NON MÉ OH !!!!!! yes.gifyes.gifyes.gif

#2 Re : Système » [résolu]sudo ne demande plus de mot de passe » 26-02-2020 17:42:20

smolski a écrit :

Cauryl a écrit :

Si quelqu'un qui a l'habitude de tripatouiller le fichier sudoers


Oui, le wiki df, là :
https://debian-facile.org/doc:systeme:sudo big_smile



Oui ici également  https://wiki.debian.org/fr/sudo
C’est une très mauvaise idée
Si vous voulez que les membres du groupe sudo exécutent des commandes sans mot de passe, ajoutez la ligne :

%sudo ALL=(ALL) NOPASSWD: ALL


kernal_panic.gif out.gif

#3 Re : KDE » la version du kde plasma -est sorte ce quand ? » 25-02-2020 20:56:52

Bonsoir rodrigue7973 cool

L’environnement de bureau KDE Plasma 5.18 est disponible depuis le 11 février. C’est une version LTS (support de deux ans). Au programme, plus de clarté, un aspect plus attrayant et des nouvelles fonctionnalités. Faisons le tour des principales nouveautés de KDE Plasma 5.18  wink

ici https://www.numetopia.fr/kde-plasma-5-1 … i-de-neuf/

https://wiki.debian.org/fr/DontBreakDeb … nkenDebian

#4 Re : Gestion des paquets Debian » [Résolu] Réparations paquets cassés » 11-12-2019 21:24:15

mo260842 a écrit :

Sur un tuto, j'ai trouvé la commande suivante qui était donnée pour lister les paquets cassés ?????

$ sudo dpkg -l | grep ^rc



Bonsoir pour information:
La commande suivante affiche une liste de tous les paquets supprimés qui pourraient avoir laissé des fichiers de configuration sur le système (s'il y en a) :

dpkg -l | awk '/^rc/ { print $2 }'



Supprimer ces paquets en une seule fois:

Code BASH:
#apt-get purge $(dpkg -l | awk '/^rc/ { print $2 }')
#apt purge $(dpkg -l | awk '/^rc/ { print $2 }')
ici https://debian-facile.org/utilisateurs: … igration?s[]=lister&s[]=paquets


Bonne chance ! wink

#5 Re : Réseau » UFW pour un Laptop globe-trotter » 06-12-2019 19:54:02

@31hud

Merci pour ta réponse qui m'a permis de rectifier ma bêtise wink

ufw status verbose


Status: active
Logging: on (low)
Default: deny (incoming), allow (outgoing), disabled (routed)
New profiles: skip
 

#6 Re : GNOME 3 » Bug interface wifi » 03-12-2019 17:07:30

MntiKor a écrit :

Bien le bonjour.
Gnome ne trouve plus ma carte wifi. Toutefois je peux toujours me connecter au Wifi avec wicd-curses que j'utilisais déjà avec i3. Quelqu'un saurait comment je peux régler ça ?



Bonjour,

Conflits potentiels
Network-Manager, tout comme ifupdown, wicd, Connection-Manager et dhcpcd5, s'occupe de gérer les connexions réseau, il peut donc entrer en conflit avec ces outils s'ils sont présents !

Regarde ici https://debian-facile.org/doc:reseau:network-manager?s[]=wicd

#7 Réseau » UFW pour un Laptop globe-trotter » 03-12-2019 09:17:07

Coconuts
Réponses : 3
Bonjour,

Sur un  Laptop qui voyage un peu, Debian stable avec les mises à jour effectuées sérieusement, est-il superflu ou indispensable de mettre en œuvre un programme du type UFW ?
Dans cette éventualité, les règles suivantes sont elles suffisantes ?     
Merci par avance idea.gif

ufw status verbose


Status: active
Logging: on (low)
Default: allow (incoming), allow (outgoing), disabled (routed)
New profiles: skip


‘Vous avez ainsi la configuration de base’ .

#8 Re : Débuter avec la ligne de commande » [RESOLU]Problème avec /var/log/Xorg.0.log » 28-11-2019 15:47:42

golgot200 a écrit :

Et le post 11 ? wink



@golgot200 pas de problème lol
Afin d’aller jusqu’au bout concernant de ce petit souci. je précise aucune obligation de le faire wink
J’ai désinstallé le noyau buster-backports linux-image-5.3.0-0.bpo.2-amd64

uname -a


Linux buster 4.19.0-6-amd64 #1 SMP Debian 4.19.67-2+deb10u2 (2019-11-11) x86_64 GNU/Linux




voir le lien du post 11de golgot200 ici https://dwaves.org/2019/08/14/debian-10 … new-front/
Informations pour les scripts ici https://debian-facile.org/doc:programma … shell-bash

Ensuite avec Mate-Tweak,dans gestionnaire des fenêtres.
J’ai sélectionné (Marco avec compositeur GPU compton).
Ci-joint la capture d’écran de Mate-tweak

1574952857.png
Ci-joint la capture d’écran de log/Xorg.0.log (32,8 ko)

1574953048.png


Maintenant c’est réellement réglé, résolu. kernal_panic.gifwoohoo.gif

#9 Re : Débuter avec la ligne de commande » [RESOLU]Problème avec /var/log/Xorg.0.log » 28-11-2019 09:56:28

Bonjour,
Suite et fin pour ce problème.
J’avais exactement le même problème avec mon

 System: MEDION product: H61H2-LM3 v: 1.2 serial: <root required>
           Mobo: MEDION model: H61H2-LM3 v: 1.0 serial: <root required> BIOS: American Megatrends v: EM0215 date: 02/15/2012
CPU:       Topology: Dual Core model: Intel Pentium G630 bits: 64 type: MCP L2 cache: 3072 KiB
           Speed: 1596 MHz min/max: 1600/2700 MHz Core speeds (MHz): 1: 1596 2: 1596
Graphics:  Device-1: Intel 2nd Generation Core Processor Family Integrated Graphics driver: i915 v: kernel
           Display: x11 server: X.Org 1.20.4 driver: modesetting unloaded: fbdev,vesa resolution: 1680x1050~60Hz
           OpenGL: renderer: Mesa DRI Intel Sandybridge Desktop v: 3.3 Mesa 18.3.6
 


 1167.452] (EE) modeset(0): present flip failed
[  1167.647] (EE) modeset(0): Failed to get GBM bo for flip to new front.
[  1167.647] (EE) modeset(0): present flip failed
[  1167.674] (EE) modeset(0): Failed to get GBM bo for flip to new front.
[  1167.674] (EE) modeset(0): present flip failed
[  1167.692] (EE) modeset(0): Failed to get GBM bo for flip to new front.
[  1167.692] (EE) modeset(0): present flip failed
[  1167.972] (EE) modeset(0): Failed to get GBM bo for flip to new front.
[  1167.972] (EE) modeset(0): present flip failed
[  1168.248] (EE) modeset(0): Failed to get GBM bo for flip to new front.
[  1168.248] (EE) modeset(0): present flip failed
[  1168.671] (EE) modeset(0): Failed to get GBM bo for flip to new front.
[  1168.671] (EE) modeset(0): present flip failed
[  1168.689] (EE) modeset(0): Failed to get GBM bo for flip to new front.
[  1168.689] (EE) modeset(0): present flip failed
[  1168.765] (EE) modeset(0): Failed to get GBM bo for flip to new front.
[  1168.765] (EE) modeset(0): present flip failed
[  1168.776] (EE) modeset(0): Failed to get GBM bo for flip to new front.
[  1168.777] (EE) modeset(0): present flip failed
[  1168.794] (EE) modeset(0): Failed to get GBM bo for flip to new front.
[  1168.794] (EE) modeset(0): present flip failed
[  1169.105] (EE) modeset(0): Failed to get GBM bo for flip to new front.



J’ai installé le noyau suivant :

sudo apt-get install -t buster-backports linux-image-5.3.0-0.bpo.2-amd64


Au reboot un petit contrôle du fichier Xorg.0.log (39,9 ko) le problème est donc réglé, contourné avec le kernel buster-backports.

Ci-joint le nouveau fichier log/Xorg.0.log.

[     4.485] (II) modeset(0): Output VGA-1 connected
[     4.485] (II) modeset(0): Output HDMI-1 disconnected
[     4.485] (II) modeset(0): Output DP-1 disconnected
[     4.485] (II) modeset(0): Using exact sizes for initial modes
[     4.485] (II) modeset(0): Output VGA-1 using initial mode 1680x1050 +0+0
[     4.485] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[     4.485] (==) modeset(0): DPI set to (96, 96)
[     4.485] (II) Loading sub module "fb"
[     4.486] (II) LoadModule: "fb"
[     4.486] (II) Loading /usr/lib/xorg/modules/libfb.so
[     4.487] (II) Module fb: vendor="X.Org Foundation"
[     4.487]  compiled for 1.20.4, module version = 1.0.0
[     4.487]  ABI class: X.Org ANSI C Emulation, version 0.4
[     4.487] (II) UnloadModule: "fbdev"
[     4.487] (II) Unloading fbdev
[     4.487] (II) UnloadSubModule: "fbdevhw"
[     4.487] (II) Unloading fbdevhw
[     4.487] (II) UnloadModule: "vesa"
[     4.487] (II) Unloading vesa
[     4.497] (==) modeset(0): Backing store enabled
[     4.497] (==) modeset(0): Silken mouse enabled
[     4.507] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[     4.508] (==) modeset(0): DPMS enabled
[     4.508] (II) modeset(0): [DRI2] Setup complete
[     4.509] (II) modeset(0): [DRI2]   DRI driver: i965
[     4.509] (II) modeset(0): [DRI2]   VDPAU driver: i965
[     4.509] (II) Initializing extension Generic Event Extension
[     4.509] (II) Initializing extension SHAPE
[     4.509] (II) Initializing extension MIT-SHM
[     4.509] (II) Initializing extension XInputExtension
[     4.510] (II) Initializing extension XTEST
[     4.510] (II) Initializing extension BIG-REQUESTS
[     4.510] (II) Initializing extension SYNC
[     4.511] (II) Initializing extension XKEYBOARD
[     4.511] (II) Initializing extension XC-MISC
[     4.511] (II) Initializing extension SECURITY
[     4.511] (II) Initializing extension XFIXES
[     4.511] (II) Initializing extension RENDER
[     4.512] (II) Initializing extension RANDR
[     4.512] (II) Initializing extension COMPOSITE
[     4.512] (II) Initializing extension DAMAGE
[     4.512] (II) Initializing extension MIT-SCREEN-SAVER
[     4.513] (II) Initializing extension DOUBLE-BUFFER
[     4.513] (II) Initializing extension RECORD
[     4.513] (II) Initializing extension DPMS
[     4.513] (II) Initializing extension Present
[     4.514] (II) Initializing extension DRI3
[     4.514] (II) Initializing extension X-Resource
[     4.514] (II) Initializing extension XVideo
[     4.514] (II) Initializing extension XVideo-MotionCompensation
[     4.514] (II) Initializing extension SELinux
[     4.514] (II) SELinux: Disabled on system
[     4.514] (II) Initializing extension GLX
[     4.528] (II) AIGLX: Loaded and initialized i965
[     4.528] (II) GLX: Initialized DRI2 GL provider for screen 0
[     4.528] (II) Initializing extension XFree86-VidModeExtension
[     4.528] (II) Initializing extension XFree86-DGA
[     4.528] (II) Initializing extension XFree86-DRI
[     4.528] (II) Initializing extension DRI2
[     4.541] (II) modeset(0): Damage tracking initialized
[     4.541] (II) modeset(0): Setting screen physical size to 444 x 277
[     4.613] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[     4.613] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     4.613] (II) LoadModule: "libinput"
[     4.613] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[     4.621] (II) Module libinput: vendor="X.Org Foundation"
[     4.621]  compiled for 1.20.4, module version = 0.28.2
[     4.621]  Module class: X.Org XInput Driver
[     4.621]  ABI class: X.Org XInput driver, version 24.1
[     4.621] (II) Using input driver 'libinput' for 'Power Button'
[     4.621] (**) Power Button: always reports core events
[     4.621] (**) Option "Device" "/dev/input/event1"
[     4.621] (**) Option "_source" "server/udev"
[     4.627] (II) event1  - Power Button: is tagged by udev as: Keyboard
[     4.627] (II) event1  - Power Button: device is a keyboard
[     4.627] (II) event1  - Power Button: device removed
[     4.645] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[     4.645] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     4.645] (**) Option "xkb_model" "pc105"
[     4.645] (**) Option "xkb_layout" "fr"
[     4.645] (**) Option "xkb_variant" "latin9"
[     4.672] (II) event1  - Power Button: is tagged by udev as: Keyboard
[     4.672] (II) event1  - Power Button: device is a keyboard
[     4.673] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[     4.673] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     4.673] (II) Using input driver 'libinput' for 'Power Button'
[     4.673] (**) Power Button: always reports core events
[     4.673] (**) Option "Device" "/dev/input/event0"
[     4.673] (**) Option "_source" "server/udev"
[     4.674] (II) event0  - Power Button: is tagged by udev as: Keyboard
[     4.674] (II) event0  - Power Button: device is a keyboard
[     4.674] (II) event0  - Power Button: device removed
[     4.693] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[     4.693] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[     4.693] (**) Option "xkb_model" "pc105"
[     4.693] (**) Option "xkb_layout" "fr"
[     4.693] (**) Option "xkb_variant" "latin9"
[     4.695] (II) event0  - Power Button: is tagged by udev as: Keyboard
[     4.695] (II) event0  - Power Button: device is a keyboard
[     4.696] (II) config/udev: Adding input device Genius Optical Mouse (/dev/input/event3)
[     4.696] (**) Genius Optical Mouse: Applying InputClass "libinput pointer catchall"
[     4.696] (II) Using input driver 'libinput' for 'Genius Optical Mouse'
[     4.697] (**) Genius Optical Mouse: always reports core events
[     4.697] (**) Option "Device" "/dev/input/event3"
[     4.697] (**) Option "_source" "server/udev"
[     4.755] (II) event3  - Genius Optical Mouse: is tagged by udev as: Mouse
[     4.755] (II) event3  - Genius Optical Mouse: device is a pointer
[     4.755] (II) event3  - Genius Optical Mouse: device removed
[     4.789] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:0458:003A.0001/input/input3/event3"
[     4.789] (II) XINPUT: Adding extended input device "Genius Optical Mouse" (type: MOUSE, id 8)
[     4.790] (**) Option "AccelerationScheme" "none"
[     4.790] (**) Genius Optical Mouse: (accel) selected scheme none/0
[     4.790] (**) Genius Optical Mouse: (accel) acceleration factor: 2.000
[     4.790] (**) Genius Optical Mouse: (accel) acceleration threshold: 4
[     4.851] (II) event3  - Genius Optical Mouse: is tagged by udev as: Mouse
[     4.851] (II) event3  - Genius Optical Mouse: device is a pointer
[     4.852] (II) config/udev: Adding input device Genius Optical Mouse (/dev/input/mouse0)
[     4.852] (II) No input driver specified, ignoring this device.
[     4.852] (II) This device may have been added with another device file.
[     4.854] (II) config/udev: Adding input device CHICONY USB Keyboard (/dev/input/event4)
[     4.854] (**) CHICONY USB Keyboard: Applying InputClass "libinput keyboard catchall"
[     4.854] (II) Using input driver 'libinput' for 'CHICONY USB Keyboard'
[     4.854] (**) CHICONY USB Keyboard: always reports core events
[     4.854] (**) Option "Device" "/dev/input/event4"
[     4.854] (**) Option "_source" "server/udev"
[     4.856] (II) event4  - CHICONY USB Keyboard: is tagged by udev as: Keyboard
[     4.856] (II) event4  - CHICONY USB Keyboard: device is a keyboard
[     4.856] (II) event4  - CHICONY USB Keyboard: device removed
[     4.873] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:04F2:0833.0002/input/input4/event4"
[     4.873] (II) XINPUT: Adding extended input device "CHICONY USB Keyboard" (type: KEYBOARD, id 9)
[     4.873] (**) Option "xkb_model" "pc105"
[     4.873] (**) Option "xkb_layout" "fr"
[     4.873] (**) Option "xkb_variant" "latin9"
[     4.876] (II) event4  - CHICONY USB Keyboard: is tagged by udev as: Keyboard
[     4.876] (II) event4  - CHICONY USB Keyboard: device is a keyboard
[     4.877] (II) config/udev: Adding input device CHICONY USB Keyboard System Control (/dev/input/event5)
[     4.877] (**) CHICONY USB Keyboard System Control: Applying InputClass "libinput keyboard catchall"
[     4.877] (II) Using input driver 'libinput' for 'CHICONY USB Keyboard System Control'
[     4.877] (**) CHICONY USB Keyboard System Control: always reports core events
[     4.877] (**) Option "Device" "/dev/input/event5"
[     4.877] (**) Option "_source" "server/udev"
[     4.879] (II) event5  - CHICONY USB Keyboard System Control: is tagged by udev as: Keyboard
[     4.880] (II) event5  - CHICONY USB Keyboard System Control: device is a keyboard
[     4.880] (II) event5  - CHICONY USB Keyboard System Control: device removed
[     4.901] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:04F2:0833.0003/input/input5/event5"
[     4.901] (II) XINPUT: Adding extended input device "CHICONY USB Keyboard System Control" (type: KEYBOARD, id 10)
[     4.901] (**) Option "xkb_model" "pc105"
[     4.901] (**) Option "xkb_layout" "fr"
[     4.901] (**) Option "xkb_variant" "latin9"
[     4.904] (II) event5  - CHICONY USB Keyboard System Control: is tagged by udev as: Keyboard
[     4.904] (II) event5  - CHICONY USB Keyboard System Control: device is a keyboard
[     4.905] (II) config/udev: Adding input device CHICONY USB Keyboard Consumer Control (/dev/input/event6)
[     4.905] (**) CHICONY USB Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[     4.905] (II) Using input driver 'libinput' for 'CHICONY USB Keyboard Consumer Control'
[     4.905] (**) CHICONY USB Keyboard Consumer Control: always reports core events
[     4.905] (**) Option "Device" "/dev/input/event6"
[     4.905] (**) Option "_source" "server/udev"
[     4.907] (II) event6  - CHICONY USB Keyboard Consumer Control: is tagged by udev as: Keyboard
[     4.907] (II) event6  - CHICONY USB Keyboard Consumer Control: device is a keyboard
[     4.908] (II) event6  - CHICONY USB Keyboard Consumer Control: device removed
[     4.941] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:04F2:0833.0003/input/input6/event6"
[     4.941] (II) XINPUT: Adding extended input device "CHICONY USB Keyboard Consumer Control" (type: KEYBOARD, id 11)
[     4.941] (**) Option "xkb_model" "pc105"
[     4.941] (**) Option "xkb_layout" "fr"
[     4.941] (**) Option "xkb_variant" "latin9"
[     4.944] (II) event6  - CHICONY USB Keyboard Consumer Control: is tagged by udev as: Keyboard
[     4.944] (II) event6  - CHICONY USB Keyboard Consumer Control: device is a keyboard
[     4.945] (II) config/udev: Adding input device CHICONY USB Keyboard (/dev/input/event8)
[     4.945] (**) CHICONY USB Keyboard: Applying InputClass "libinput keyboard catchall"
[     4.945] (II) Using input driver 'libinput' for 'CHICONY USB Keyboard'
[     4.945] (**) CHICONY USB Keyboard: always reports core events
[     4.945] (**) Option "Device" "/dev/input/event8"
[     4.945] (**) Option "_source" "server/udev"
[     4.947] (II) event8  - CHICONY USB Keyboard: is tagged by udev as: Keyboard
[     4.947] (II) event8  - CHICONY USB Keyboard: device is a keyboard
[     4.948] (II) event8  - CHICONY USB Keyboard: device removed
[     4.981] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:04F2:0833.0003/input/input7/event8"
[     4.981] (II) XINPUT: Adding extended input device "CHICONY USB Keyboard" (type: KEYBOARD, id 12)
[     4.981] (**) Option "xkb_model" "pc105"
[     4.981] (**) Option "xkb_layout" "fr"
[     4.981] (**) Option "xkb_variant" "latin9"
[     4.984] (II) event8  - CHICONY USB Keyboard: is tagged by udev as: Keyboard
[     4.984] (II) event8  - CHICONY USB Keyboard: device is a keyboard
[     4.984] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event10)
[     4.985] (II) No input driver specified, ignoring this device.
[     4.985] (II) This device may have been added with another device file.
[     4.985] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event11)
[     4.985] (II) No input driver specified, ignoring this device.
[     4.985] (II) This device may have been added with another device file.
[     4.986] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event12)
[     4.986] (II) No input driver specified, ignoring this device.
[     4.986] (II) This device may have been added with another device file.
[     4.986] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event13)
[     4.986] (II) No input driver specified, ignoring this device.
[     4.986] (II) This device may have been added with another device file.
[     4.987] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event14)
[     4.987] (II) No input driver specified, ignoring this device.
[     4.987] (II) This device may have been added with another device file.
[     4.987] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
[     4.987] (II) No input driver specified, ignoring this device.
[     4.987] (II) This device may have been added with another device file.
[     4.988] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event9)
[     4.988] (II) No input driver specified, ignoring this device.
[     4.988] (II) This device may have been added with another device file.
[     4.989] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[     4.989] (II) No input driver specified, ignoring this device.
[     4.989] (II) This device may have been added with another device file.
[     7.424] (II) config/udev: removing device Genius Optical Mouse
[     7.424] (II) event3  - Genius Optical Mouse: device removed
[     7.437] (II) UnloadModule: "libinput"
[     7.797] (II) config/udev: Adding input device Genius Optical Mouse (/dev/input/mouse0)
[     7.797] (II) No input driver specified, ignoring this device.
[     7.797] (II) This device may have been added with another device file.
[     7.895] (II) config/udev: Adding input device Genius Optical Mouse (/dev/input/event3)
[     7.895] (**) Genius Optical Mouse: Applying InputClass "libinput pointer catchall"
[     7.895] (II) Using input driver 'libinput' for 'Genius Optical Mouse'
[     7.895] (**) Genius Optical Mouse: always reports core events
[     7.895] (**) Option "Device" "/dev/input/event3"
[     7.895] (**) Option "_source" "server/udev"
[     7.955] (II) event3  - Genius Optical Mouse: is tagged by udev as: Mouse
[     7.955] (II) event3  - Genius Optical Mouse: device is a pointer
[     7.955] (II) event3  - Genius Optical Mouse: device removed
[     7.985] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:0458:003A.0004/input/input15/event3"
[     7.985] (II) XINPUT: Adding extended input device "Genius Optical Mouse" (type: MOUSE, id 8)
[     7.985] (**) Option "AccelerationScheme" "none"
[     7.985] (**) Genius Optical Mouse: (accel) selected scheme none/0
[     7.985] (**) Genius Optical Mouse: (accel) acceleration factor: 2.000
[     7.985] (**) Genius Optical Mouse: (accel) acceleration threshold: 4
[     8.047] (II) event3  - Genius Optical Mouse: is tagged by udev as: Mouse
[     8.047] (II) event3  - Genius Optical Mouse: device is a pointer
[    30.605] (II) modeset(0): EDID vendor "SAM", prod id 1099
[    30.605] (II) modeset(0): Using EDID range info for horizontal sync
[    30.605] (II) modeset(0): Using EDID range info for vertical refresh
[    30.605] (II) modeset(0): Printing DDC gathered Modelines:
[    30.605] (II) modeset(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz eP)
[    30.605] (II) modeset(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    30.605] (II) modeset(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    30.605] (II) modeset(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    30.605] (II) modeset(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[    30.605] (II) modeset(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    30.605] (II) modeset(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    30.605] (II) modeset(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    30.605] (II) modeset(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    30.605] (II) modeset(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    30.605] (II) modeset(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    30.605] (II) modeset(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    30.605] (II) modeset(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    30.605] (II) modeset(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    30.605] (II) modeset(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    30.605] (II) modeset(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    30.605] (II) modeset(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    30.605] (II) modeset(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[    30.622] (II) modeset(0): EDID vendor "SAM", prod id 1099
[    30.622] (II) modeset(0): Using hsync ranges from config file
[    30.622] (II) modeset(0): Using vrefresh ranges from config file
[    30.622] (II) modeset(0): Printing DDC gathered Modelines:
[    30.622] (II) modeset(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz eP)
[    30.622] (II) modeset(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    30.622] (II) modeset(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    30.622] (II) modeset(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    30.622] (II) modeset(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[    30.622] (II) modeset(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    30.622] (II) modeset(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    30.622] (II) modeset(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    30.622] (II) modeset(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    30.622] (II) modeset(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    30.622] (II) modeset(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    30.622] (II) modeset(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    30.622] (II) modeset(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    30.622] (II) modeset(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    30.622] (II) modeset(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    30.622] (II) modeset(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    30.622] (II) modeset(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    30.622] (II) modeset(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[    30.640] (II) modeset(0): EDID vendor "SAM", prod id 1099
[    30.640] (II) modeset(0): Using hsync ranges from config file
[    30.640] (II) modeset(0): Using vrefresh ranges from config file
[    30.640] (II) modeset(0): Printing DDC gathered Modelines:
[    30.640] (II) modeset(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz eP)
[    30.640] (II) modeset(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    30.640] (II) modeset(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    30.640] (II) modeset(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    30.640] (II) modeset(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[    30.640] (II) modeset(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    30.640] (II) modeset(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    30.640] (II) modeset(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    30.640] (II) modeset(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    30.640] (II) modeset(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    30.640] (II) modeset(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    30.640] (II) modeset(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    30.640] (II) modeset(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    30.640] (II) modeset(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    30.640] (II) modeset(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    30.640] (II) modeset(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    30.640] (II) modeset(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    30.640] (II) modeset(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[    30.657] (II) modeset(0): EDID vendor "SAM", prod id 1099
[    30.657] (II) modeset(0): Using hsync ranges from config file
[    30.657] (II) modeset(0): Using vrefresh ranges from config file
[    30.657] (II) modeset(0): Printing DDC gathered Modelines:
[    30.657] (II) modeset(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz eP)
[    30.657] (II) modeset(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    30.657] (II) modeset(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    30.657] (II) modeset(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    30.657] (II) modeset(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[    30.657] (II) modeset(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    30.657] (II) modeset(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    30.657] (II) modeset(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    30.657] (II) modeset(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    30.657] (II) modeset(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    30.657] (II) modeset(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    30.657] (II) modeset(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    30.657] (II) modeset(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    30.657] (II) modeset(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    30.657] (II) modeset(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    30.657] (II) modeset(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    30.657] (II) modeset(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    30.657] (II) modeset(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[    31.708] (II) modeset(0): EDID vendor "SAM", prod id 1099
[    31.708] (II) modeset(0): Using hsync ranges from config file
[    31.708] (II) modeset(0): Using vrefresh ranges from config file
[    31.708] (II) modeset(0): Printing DDC gathered Modelines:
[    31.708] (II) modeset(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz eP)
[    31.708] (II) modeset(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    31.708] (II) modeset(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    31.708] (II) modeset(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    31.708] (II) modeset(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[    31.708] (II) modeset(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    31.708] (II) modeset(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    31.708] (II) modeset(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    31.708] (II) modeset(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    31.708] (II) modeset(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    31.708] (II) modeset(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    31.708] (II) modeset(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    31.708] (II) modeset(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    31.708] (II) modeset(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    31.708] (II) modeset(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    31.708] (II) modeset(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    31.708] (II) modeset(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    31.708] (II) modeset(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[   598.444] (II) config/udev: removing device Genius Optical Mouse
[   598.444] (II) event3  - Genius Optical Mouse: device removed
[   598.467] (II) UnloadModule: "libinput"
[   598.817] (II) config/udev: Adding input device Genius Optical Mouse (/dev/input/mouse0)
[   598.817] (II) No input driver specified, ignoring this device.
[   598.817] (II) This device may have been added with another device file.
[   598.915] (II) config/udev: Adding input device Genius Optical Mouse (/dev/input/event3)
[   598.915] (**) Genius Optical Mouse: Applying InputClass "libinput pointer catchall"
[   598.915] (II) Using input driver 'libinput' for 'Genius Optical Mouse'
[   598.915] (**) Genius Optical Mouse: always reports core events
[   598.915] (**) Option "Device" "/dev/input/event3"
[   598.915] (**) Option "_source" "server/udev"
[   598.975] (II) event3  - Genius Optical Mouse: is tagged by udev as: Mouse
[   598.975] (II) event3  - Genius Optical Mouse: device is a pointer
[   598.975] (II) event3  - Genius Optical Mouse: device removed
[   599.005] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:0458:003A.0005/input/input16/event3"
[   599.005] (II) XINPUT: Adding extended input device "Genius Optical Mouse" (type: MOUSE, id 8)
[   599.007] (**) Option "AccelerationScheme" "none"
[   599.008] (**) Genius Optical Mouse: (accel) selected scheme none/0
[   599.008] (**) Genius Optical Mouse: (accel) acceleration factor: 2.000
[   599.008] (**) Genius Optical Mouse: (accel) acceleration threshold: 4
[   599.067] (II) event3  - Genius Optical Mouse: is tagged by udev as: Mouse
[   599.067] (II) event3  - Genius Optical Mouse: device is a pointer

#10 Re : Débuter avec la ligne de commande » [RESOLU]Problème avec /var/log/Xorg.0.log » 28-11-2019 00:15:52

raleur a écrit :

Je n'appelle pas ça une solution. Tu n'as pas envie d'essayer la solution du message 194 du sujet pointé par golgot200 qui me semble prometteuse ?



Bonsoir,
Pour information :
J’ai testé : la création d’un fichier nano /etc/X11/xorg.conf comme tel.

Section "Device"
  Identifier "card0"
  Driver "modesetting"
  Option "PageFlip" off
EndSection



Au redémarrage du système impossible d’accéder à ma session graphique
J’ai donc dans la console lancé la commande suivante :

sudo rm /etc/X11/xorg.conf


Puis un sudo reboot


j’ai retrouvé ma session graphique.
Terminé pour moi, j’abdique. wink
Merci A Tous

#11 Re : Débuter avec la ligne de commande » [RESOLU]Problème avec /var/log/Xorg.0.log » 27-11-2019 16:09:15

raleur a écrit :

golgot200 a écrit :

Post 192 peut-être


Plutôt 194, non ?

Coconuts a écrit :

Je vais maintenant purger NVIDIA


Quel rapport avec Nvidia ? Ce sont des messages d'erreur du pilote modesetting, donc pour un GPU Intel a priori (bien qu'il soit censé fonctionner avec tout GPU ayant un pilote KMS).


Exact un Bug GPU Intel?

Merci pour vos réponses.
Je vais retenir comme solution, un petit rm une fois par semaine sur ce fichier log qui ne me sert à rien.
En prenant en compte que la commande #’rm n’est pas sans danger. https://debian-facile.org/doc:systeme:rm


1574869068.png

Après redémarrage du système pas de problème wink
@Raleur, @melissa6969, @golgot200 un grand merci à vous smile

#12 Re : Débuter avec la ligne de commande » [RESOLU]Problème avec /var/log/Xorg.0.log » 27-11-2019 10:15:22

golgot200 a écrit :



@golgot200
Merci pour ta réponse très rapide.
Malheureusement, cela ne règle pas le problème, dès que je réactive le gestionnaire de fenêtres avec composition logicielle, le fichier /var/log/Xorg.0.log reprend de l’embonpoint.
Je vais maintenant purger NVIDIA ( no problèmo). wink

#13 Re : Débuter avec la ligne de commande » [RESOLU]Problème avec /var/log/Xorg.0.log » 27-11-2019 09:39:36

Pour information ,
Pour l’instant la seule solution que j’ai trouvée est la suivante :
dans le gestionnaire de composition, j’ai désactivé le gestionnaire de fenêtres avec composition logicielle.
Cela fonctionne, plus de redondance sur ce fichier perturbateur. BUG ? sad
1574846229.png

#14 Débuter avec la ligne de commande » [RESOLU]Problème avec /var/log/Xorg.0.log » 27-11-2019 08:43:57

Coconuts
Réponses : 16
Bonjour,

J’ai un souci avec /var/log/Xorg.0.log , ce dernier prend beaucoup d’embonpoint. hmm
Exemple deux lignes écrites par seconde !
Question: est-il possible de réduire l’écriture de ce fichier ?

cat /var/log/Xorg.0.log



 1062.379] (EE) modeset(0): present flip failed
[  1062.512] (EE) modeset(0): Failed to get GBM bo for flip to new front.
[  1062.512] (EE) modeset(0): present flip failed
[  1062.662] (EE) modeset(0): Failed to get GBM bo for flip to new front.
[  1062.662] (EE) modeset(0): present flip failed
[  1062.829] (EE) modeset(0): Failed to get GBM bo for flip to new front.
[  1062.829] (EE) modeset(0): present flip failed
[  1062.979] (EE) modeset(0): Failed to get GBM bo for flip to new front.
[  1062.979] (EE) modeset(0): present flip failed
[  1063.112] (EE) modeset(0): Failed to get GBM bo for flip to new front.
[  1063.112] (EE) modeset(0): present flip failed
[  1063.129] (EE) modeset(0): Failed to get GBM bo for flip to new front.
[  1063.129] (EE) modeset(0): present flip failed
[  1063.262] (EE) modeset(0): Failed to get GBM bo for flip to new front.
[  1063.262] (EE) modeset(0): present flip failed
[  1063.397] (EE) modeset(0): Failed to get GBM bo for flip to new front.
[  1063.397] (EE) modeset(0): present flip failed
[  1063.429] (EE) modeset(0): Failed to get GBM bo for flip to new front.
[  1063.429] (EE) modeset(0): present flip failed
 


Merci

#15 Re : Scripts, programmes et robots » [merci j'ai assez] Votre config matériel + drivers proprio » 10-11-2019 22:29:10

vrms


Non-free packages installed on debian

firmware-misc-nonfree               Binary firmware for various drivers in the Linux kerne
firmware-realtek                    Binary firmware for Realtek wired/wifi/BT adapters

  2 non-free packages, 0.1% of 1752 installed packages.
 

#16 Re : Scripts, programmes et robots » [merci j'ai assez] Votre config matériel + drivers proprio » 10-11-2019 22:28:10

Bonsoir,

lspci -vmmnnk


Slot: 00:00.0
Class:  Host bridge [0600]
Vendor: Intel Corporation [8086]
Device: 3rd Gen Core processor DRAM Controller [0154]
SVendor:  ASUSTeK Computer Inc. [1043]
SDevice:  3rd Gen Core processor DRAM Controller [124d]
Rev:  09
Driver: ivb_uncore

Slot: 00:01.0
Class:  PCI bridge [0604]
Vendor: Intel Corporation [8086]
Device: Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port [0151]
Rev:  09
Driver: pcieport

Slot: 00:02.0
Class:  VGA compatible controller [0300]
Vendor: Intel Corporation [8086]
Device: 3rd Gen Core processor Graphics Controller [0166]
SVendor:  ASUSTeK Computer Inc. [1043]
SDevice:  3rd Gen Core processor Graphics Controller [124d]
Rev:  09
Driver: i915
Module: i915

Slot: 00:14.0
Class:  USB controller [0c03]
Vendor: Intel Corporation [8086]
Device: 7 Series/C210 Series Chipset Family USB xHCI Host Controller [1e31]
SVendor:  ASUSTeK Computer Inc. [1043]
SDevice:  7 Series/C210 Series Chipset Family USB xHCI Host Controller [124d]
Rev:  04
ProgIf: 30
Driver: xhci_hcd
Module: xhci_pci

Slot: 00:16.0
Class:  Communication controller [0780]
Vendor: Intel Corporation [8086]
Device: 7 Series/C216 Chipset Family MEI Controller #1 [1e3a]
SVendor:  ASUSTeK Computer Inc. [1043]
SDevice:  7 Series/C216 Chipset Family MEI Controller [124d]
Rev:  04
Driver: mei_me
Module: mei_me

Slot: 00:1a.0
Class:  USB controller [0c03]
Vendor: Intel Corporation [8086]
Device: 7 Series/C216 Chipset Family USB Enhanced Host Controller #2 [1e2d]
SVendor:  ASUSTeK Computer Inc. [1043]
SDevice:  7 Series/C216 Chipset Family USB Enhanced Host Controller [124d]
Rev:  04
ProgIf: 20
Driver: ehci-pci
Module: ehci_pci

Slot: 00:1b.0
Class:  Audio device [0403]
Vendor: Intel Corporation [8086]
Device: 7 Series/C216 Chipset Family High Definition Audio Controller [1e20]
SVendor:  ASUSTeK Computer Inc. [1043]
SDevice:  7 Series/C216 Chipset Family High Definition Audio Controller [118f]
Rev:  04
Driver: snd_hda_intel
Module: snd_hda_intel

Slot: 00:1c.0
Class:  PCI bridge [0604]
Vendor: Intel Corporation [8086]
Device: 7 Series/C216 Chipset Family PCI Express Root Port 1 [1e10]
Rev:  c4
Driver: pcieport

Slot: 00:1c.1
Class:  PCI bridge [0604]
Vendor: Intel Corporation [8086]
Device: 7 Series/C210 Series Chipset Family PCI Express Root Port 2 [1e12]
Rev:  c4
Driver: pcieport

Slot: 00:1c.3
Class:  PCI bridge [0604]
Vendor: Intel Corporation [8086]
Device: 7 Series/C216 Chipset Family PCI Express Root Port 4 [1e16]
Rev:  c4
Driver: pcieport

Slot: 00:1d.0
Class:  USB controller [0c03]
Vendor: Intel Corporation [8086]
Device: 7 Series/C216 Chipset Family USB Enhanced Host Controller #1 [1e26]
SVendor:  ASUSTeK Computer Inc. [1043]
SDevice:  7 Series/C216 Chipset Family USB Enhanced Host Controller [124d]
Rev:  04
ProgIf: 20
Driver: ehci-pci
Module: ehci_pci

Slot: 00:1f.0
Class:  ISA bridge [0601]
Vendor: Intel Corporation [8086]
Device: HM76 Express Chipset LPC Controller [1e59]
SVendor:  ASUSTeK Computer Inc. [1043]
SDevice:  HM76 Express Chipset LPC Controller [124d]
Rev:  04
Driver: lpc_ich
Module: lpc_ich

Slot: 00:1f.2
Class:  SATA controller [0106]
Vendor: Intel Corporation [8086]
Device: 7 Series Chipset Family 6-port SATA Controller [AHCI mode] [1e03]
SVendor:  ASUSTeK Computer Inc. [1043]
SDevice:  7 Series Chipset Family 6-port SATA Controller [AHCI mode] [124d]
Rev:  04
ProgIf: 01
Driver: ahci
Module: ahci

Slot: 00:1f.3
Class:  SMBus [0c05]
Vendor: Intel Corporation [8086]
Device: 7 Series/C216 Chipset Family SMBus Controller [1e22]
SVendor:  ASUSTeK Computer Inc. [1043]
SDevice:  7 Series/C216 Chipset Family SMBus Controller [124d]
Rev:  04
Driver: i801_smbus
Module: i2c_i801

Slot: 01:00.0
Class:  3D controller [0302]
Vendor: NVIDIA Corporation [10de]
Device: GF117M [GeForce 610M/710M/810M/820M / GT 620M/625M/630M/720M] [1140]
SVendor:  ASUSTeK Computer Inc. [1043]
SDevice:  GeForce GT 710M [223a]
Rev:  a1
Module: nouveau

Slot: 03:00.0
Class:  Network controller [0280]
Vendor: Ralink corp. [1814]
Device: RT5390 Wireless 802.11n 1T/1R PCIe [5390]
SVendor:  Foxconn International, Inc. [105b]
SDevice:  RT5390 Wireless 802.11n 1T/1R PCIe [e054]
Driver: rt2800pci
Module: rt2800pci

Slot: 04:00.0
Class:  Unassigned class [ff00]
Vendor: Realtek Semiconductor Co., Ltd. [10ec]
Device: RTL8411 PCI Express Card Reader [5289]
SVendor:  ASUSTeK Computer Inc. [1043]
SDevice:  RTL8411 PCI Express Card Reader [202f]
Rev:  01
Driver: rtsx_pci
Module: rtsx_pci

Slot: 04:00.2
Class:  Ethernet controller [0200]
Vendor: Realtek Semiconductor Co., Ltd. [10ec]
Device: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [8168]
SVendor:  ASUSTeK Computer Inc. [1043]
SDevice:  RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [200f]
Rev:  0a
Driver: r8169
Module: r8169
 

#18 Re : Installation de Debian » [Résolu] Debian 10(.1) - Kernel Panic après grub » 26-09-2019 10:12:25

Bonjour,
Désolé par avance si mon intervention ne sert à rien. 
Je n’y connais pas grand-chose en virtualisation, mais sur une de tes copies d’écran, je vois que les outils VMware tools ne sont pas installés. ?

#19 Re : Installation de Debian » [Resolu] Debian Buster Difficultés » 30-08-2019 16:55:14

Pour lancer une commande en root

su -


Entrer le mot passe root
puis lancer la commande en root
Exemple :
root@buster:~# apt update
Atteint :1 http://deb.debian.org/debian buster InRelease
Atteint :2 http://deb.debian.org/debian-security buster/updates InRelease
Atteint :3 http://deb.debian.org/debian buster-updates InRelease
Atteint :4 http://deb.debian.org/debian buster-backports InRelease
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances       
Lecture des informations d'état... Fait
Tous les paquets sont à jour.
root@buster:~#

#20 Re : Installation de Debian » [Resolu] Debian Buster Difficultés » 30-08-2019 16:38:21

Bonjour

Caton a écrit :


Aucun changement


C’est normal il faut renseigner le fichier sudo en root.
Commande

su -


Entrer le Mot de passe pour  root:


Ensuite regarde le post 11

visudo

#21 Re : Matériel » problèmes inodes sdd sur une partition root [Résolu] » 30-08-2019 15:15:13

robert2a a écrit :

Bonjour
c'est un disque traditionnel , pas un ssd ?


OK je supprime ce post lol lol

#22 Re : Matériel » problèmes inodes sdd sur une partition root [Résolu] » 30-08-2019 14:51:06

Bonjour rodinux,
Pour smartctl, incapable de répondre, c’est du chinois pour moi. sad

#23 Re : Installation de Debian » [Resolu] Debian Buster Difficultés » 30-08-2019 09:26:25

smolski a écrit :

Si tu veux corriger, libre à toi, c'est ton post et tu te le gères prioritairement, quitte à ce que je te cite à ma façon dans le post suivant d'ailleurs.


Non...c’est mieux comme ça, j’ai supprimé le morceau de code [ texte GRAS] qui était resté sur francis.
francis    ALL=(ALL:ALL) ALL

[b]francis [/b]   ALL=(ALL:ALL) ALL

wink

#24 Re : Installation de Debian » [Resolu] Debian Buster Difficultés » 30-08-2019 08:02:07

Salut smolski lol
Edit à toto : Pour plus de clarté, mis le retour de la commande visudo en utilisant Autre code du forum.

Pour information: wink le problème maintenant francis n’apparaît plus en gras avec [les balises code] francis

#25 Re : Installation de Debian » [Resolu] Debian Buster Difficultés » 30-08-2019 07:24:04

Bonjour,
Pour sudo avec un seul utilisateur, mot de passe demandé wink

visudo


#
# This file MUST be edited with the 'visudo' command as root.
#
# Please consider adding local content in /etc/sudoers.d/ instead of
# directly modifying this file.
#
# See the man page for details on how to write a sudoers file.
#
Defaults        env_reset
Defaults        mail_badpass
Defaults        secure_path="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin"

# Host alias specification

# User alias specification

# Cmnd alias specification

# User privilege specification
root        ALL=(ALL:ALL) ALL
francis    ALL=(ALL:ALL) ALL
# Allow members of group sudo to execute any command
%sudo   ALL=(ALL:ALL) ALL

# See sudoers(5) for more information on "#include" directives:

La touche F3 pour enregistrer
La touche F2 pour quitter



https://debian-facile.org/doc:systeme:sudo

Edit à toto : Pour plus de clarté, mis le retour de la commande visudo en utilisant Autre code du forum.

Pied de page des forums

Propulsé par FluxBB