Debian-facile
Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.
Vous n'êtes pas identifié(e).
- Contributions : Récentes | Sans réponse
#1 Matériel » Android Bluedroid » 22-10-2022 13:18:28
- fred02840
- Réponses : 0
Bonjour
Je suis passé à la fibre cette semaine, avec une Livebox 5 et un décodeur UHD. Je ne sais pas si cela en est la cause, mais j'ai repéré un « Android Bluedroid » dans les périphériques bluetooth affichés dans les paramètres. Il n'est pas configuré, et sa présence est assez aléatoire : il disparaît et réapparaît. Il n'y a pas moyen de le configurer… Quelqu'un saurait-il me dire ce que c'est ? Et, si cela est intéressant, s'il peut être configuré.
Merci d'avance
Je suis passé à la fibre cette semaine, avec une Livebox 5 et un décodeur UHD. Je ne sais pas si cela en est la cause, mais j'ai repéré un « Android Bluedroid » dans les périphériques bluetooth affichés dans les paramètres. Il n'est pas configuré, et sa présence est assez aléatoire : il disparaît et réapparaît. Il n'y a pas moyen de le configurer… Quelqu'un saurait-il me dire ce que c'est ? Et, si cela est intéressant, s'il peut être configuré.
Merci d'avance
#2 Re : Matériel » Problème avec Alsa et Pipewire (?) » 20-10-2022 16:29:34
Ne pas s'inquiéter des « ACPI Warning: » (d'après une réponse que l'on trouvera sur le forum de DF) :
ces erreurs ne disparaîtrons pas, c'est simplement dû à ton bios uefi complètement pourri (comme 90% des bios conçus pour avant tout respecter les standards imposés par microsoft) donc t'as une flopée d'erreurs acpi qui sont juste bénignes.
elles empêchent pas le fonctionnement normal du pc, ces erreurs existent depuis des années, sont très courantes sur Linux (cpu Intel majoritairement touché)
tous les pc intel que j'ai sous la main, ont des erreurs similaires ou très semblables, mais pourtant tout fonctionne à la perfection.
Une solution existe (je vais la tester) selon cette source. J'ai adapté cela au contenu de mon fichier (je n'ai pas la mention « quiet splash ») /etc/default/grub, et remplacé
GRUB_CMDLINE_LINUX_DEFAULT="quiet"
par
GRUB_CMDLINE_LINUX_DEFAULT="quiet acpi=off"
Je redémarre et je reviens…
Mouais… Solution inopérante pour moi : j'ai toujours les mêmes messages d'erreur. Je remets /etc/default/grub dans son état initial…
#3 Re : Matériel » Problème avec Alsa et Pipewire (?) » 20-10-2022 16:23:51
Pour « ENERGY_PERF_BIAS: Set to 'normal', was 'performance' », il s'agit du paramétrage de la puissance du processeur. On peut le faire avec le paquet linux-cpupower.
#4 Re : Matériel » Problème avec Alsa et Pipewire (?) » 20-10-2022 16:22:23
POur le problème
r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
Il est indiqué ici que (trad. deepl) :
le microprogramme n'a pas offert le contrôle de l'ASPM au système d'exploitation, pour des raisons que seuls les ingénieurs du fournisseur du système/de la carte mère peuvent connaître avec certitude.
Cela peut être dû au fait que le matériel n'est pas compatible ASPM, il n'y a donc rien à contrôler et les liens PCIe sont toujours alimentés à fond lorsque le système fonctionne (c'est probablement la raison la plus courante, au moins sur les systèmes de bureau). Il se peut aussi que le micrologiciel n'ait pas implémenté l'interface de programmation nécessaire, bien que le matériel soit compatible avec le système ASPM. Ou encore, il se peut que l'implémentation matérielle ait une bizarrerie qui fait qu'elle se comporte mal si un système d'exploitation n'ayant aucune connaissance spécifique du matériel tente de contrôler l'ASPM.
Et la réponse de conclure que le message est donc informatif.
#5 Re : Matériel » Problème avec Alsa et Pipewire (?) » 20-10-2022 14:55:08
Et voilà ce que renvoie dmesg, restreint aux problèmes. Ce qui m'inquiète sur l'état de santé de l'ordinateur et du système, même si « dmesg --level=alert, crit » ne donne rien
dmesg --level=err
[ 0.159565] ACPI Error: Needed type [Reference], found [Integer] 0000000023a6a483 (20220331/exresop-66)
[ 0.159634] ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20220331/dswexec-431)
[ 0.159699] ACPI Error: Aborting method \_PR.CPU0._PDC due to previous error (AE_AML_OPERAND_TYPE) (20220331/psparse-529)
[ 0.913223] ima: Error Communicating to TPM chip
[ 0.920498] ima: Error Communicating to TPM chip
[ 0.928497] ima: Error Communicating to TPM chip
[ 0.935446] ima: Error Communicating to TPM chip
[ 0.943443] ima: Error Communicating to TPM chip
[ 0.950398] ima: Error Communicating to TPM chip
[ 0.956497] ima: Error Communicating to TPM chip
[ 0.963446] ima: Error Communicating to TPM chip
[ 0.159565] ACPI Error: Needed type [Reference], found [Integer] 0000000023a6a483 (20220331/exresop-66)
[ 0.159634] ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20220331/dswexec-431)
[ 0.159699] ACPI Error: Aborting method \_PR.CPU0._PDC due to previous error (AE_AML_OPERAND_TYPE) (20220331/psparse-529)
[ 0.913223] ima: Error Communicating to TPM chip
[ 0.920498] ima: Error Communicating to TPM chip
[ 0.928497] ima: Error Communicating to TPM chip
[ 0.935446] ima: Error Communicating to TPM chip
[ 0.943443] ima: Error Communicating to TPM chip
[ 0.950398] ima: Error Communicating to TPM chip
[ 0.956497] ima: Error Communicating to TPM chip
[ 0.963446] ima: Error Communicating to TPM chip
Et là, il y en a davantage :
dmesg --level=warn
[ 0.097370] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[ 0.097370] #2 #3
[ 0.115857] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.209338] pnp 00:00: disabling [mem 0x000c0000-0x000c3fff] because it overlaps 0000:00:02.0 BAR 6 [mem 0x000c0000-0x000dffff]
[ 0.209344] pnp 00:00: disabling [mem 0x000c4000-0x000c7fff] because it overlaps 0000:00:02.0 BAR 6 [mem 0x000c0000-0x000dffff]
[ 0.209348] pnp 00:00: disabling [mem 0x000c8000-0x000cbfff] because it overlaps 0000:00:02.0 BAR 6 [mem 0x000c0000-0x000dffff]
[ 0.209352] pnp 00:00: disabling [mem 0x000cc000-0x000cffff] because it overlaps 0000:00:02.0 BAR 6 [mem 0x000c0000-0x000dffff]
[ 0.209356] pnp 00:00: disabling [mem 0x000d0000-0x000d3fff] because it overlaps 0000:00:02.0 BAR 6 [mem 0x000c0000-0x000dffff]
[ 0.209360] pnp 00:00: disabling [mem 0x000d4000-0x000d7fff] because it overlaps 0000:00:02.0 BAR 6 [mem 0x000c0000-0x000dffff]
[ 0.209363] pnp 00:00: disabling [mem 0x000d8000-0x000dbfff] because it overlaps 0000:00:02.0 BAR 6 [mem 0x000c0000-0x000dffff]
[ 0.209367] pnp 00:00: disabling [mem 0x000dc000-0x000dffff] because it overlaps 0000:00:02.0 BAR 6 [mem 0x000c0000-0x000dffff]
[ 1.358190] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[ 1.364690] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x0000000000001863 (\PMI) (20220331/utaddress-204)
[ 1.364702] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\_SB.PCI0.LPC.PMIO) (20220331/utaddress-204)
[ 1.364712] ACPI Warning: SystemIO range 0x0000000000000840-0x000000000000084F conflicts with OpRegion 0x0000000000000800-0x0000000000000863 (\GPRL) (20220331/utaddress-204)
[ 1.364718] ACPI Warning: SystemIO range 0x0000000000000840-0x000000000000084F conflicts with OpRegion 0x0000000000000800-0x0000000000000BFF (\GPR) (20220331/utaddress-204)
[ 1.364725] ACPI Warning: SystemIO range 0x0000000000000840-0x000000000000084F conflicts with OpRegion 0x0000000000000800-0x000000000000085F (\_SB.PCI0.PEG.GPIO) (20220331/utaddress-204)
[ 1.364731] ACPI Warning: SystemIO range 0x0000000000000840-0x000000000000084F conflicts with OpRegion 0x0000000000000800-0x000000000000085F (\_SB.PCI0.LPC.EC.HKEY.GINV) (20220331/utaddress-204)
[ 1.364737] ACPI Warning: SystemIO range 0x0000000000000840-0x000000000000084F conflicts with OpRegion 0x0000000000000800-0x000000000000085F (\_GPE.GINV) (20220331/utaddress-204)
[ 1.364743] ACPI Warning: SystemIO range 0x0000000000000840-0x000000000000084F conflicts with OpRegion 0x0000000000000800-0x000000000000087F (\_SB.PCI0.LPC.LPIO) (20220331/utaddress-204)
[ 1.364750] ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083F conflicts with OpRegion 0x0000000000000800-0x0000000000000863 (\GPRL) (20220331/utaddress-204)
[ 1.364756] ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083F conflicts with OpRegion 0x0000000000000800-0x0000000000000BFF (\GPR) (20220331/utaddress-204)
[ 1.364761] ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083F conflicts with OpRegion 0x0000000000000800-0x000000000000085F (\_SB.PCI0.PEG.GPIO) (20220331/utaddress-204)
[ 1.364767] ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083F conflicts with OpRegion 0x0000000000000800-0x000000000000085F (\_SB.PCI0.LPC.EC.HKEY.GINV) (20220331/utaddress-204)
[ 1.364773] ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083F conflicts with OpRegion 0x0000000000000800-0x000000000000085F (\_GPE.GINV) (20220331/utaddress-204)
[ 1.364779] ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083F conflicts with OpRegion 0x0000000000000800-0x000000000000087F (\_SB.PCI0.LPC.LPIO) (20220331/utaddress-204)
[ 1.364786] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x0000000000000863 (\GPRL) (20220331/utaddress-204)
[ 1.364792] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x0000000000000BFF (\GPR) (20220331/utaddress-204)
[ 1.364797] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000085F (\_SB.PCI0.PEG.GPIO) (20220331/utaddress-204)
[ 1.364803] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000085F (\_SB.PCI0.LPC.EC.HKEY.GINV) (20220331/utaddress-204)
[ 1.364809] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000085F (\_GPE.GINV) (20220331/utaddress-204)
[ 1.364815] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000087F (\_SB.PCI0.LPC.LPIO) (20220331/utaddress-204)
[ 1.364821] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 1.559225] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.559981] usb: port power management may be unreliable
[ 9.614959] at24 0-0050: supply vcc not found, using dummy regulator
[ 28.795615] ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
[ 28.795625] ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
[ 28.795629] ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
[ 28.795632] ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
[ 28.795635] ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
[ 28.795638] ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
[ 28.795641] ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
[ 29.103971] ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
[ 29.103980] ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
[ 29.103984] ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
[ 29.103986] ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
[ 29.103989] ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
[ 29.103991] ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
[ 29.103994] ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
[ 29.688065] kauditd_printk_skb: 18 callbacks suppressed
[ 0.097370] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[ 0.097370] #2 #3
[ 0.115857] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.209338] pnp 00:00: disabling [mem 0x000c0000-0x000c3fff] because it overlaps 0000:00:02.0 BAR 6 [mem 0x000c0000-0x000dffff]
[ 0.209344] pnp 00:00: disabling [mem 0x000c4000-0x000c7fff] because it overlaps 0000:00:02.0 BAR 6 [mem 0x000c0000-0x000dffff]
[ 0.209348] pnp 00:00: disabling [mem 0x000c8000-0x000cbfff] because it overlaps 0000:00:02.0 BAR 6 [mem 0x000c0000-0x000dffff]
[ 0.209352] pnp 00:00: disabling [mem 0x000cc000-0x000cffff] because it overlaps 0000:00:02.0 BAR 6 [mem 0x000c0000-0x000dffff]
[ 0.209356] pnp 00:00: disabling [mem 0x000d0000-0x000d3fff] because it overlaps 0000:00:02.0 BAR 6 [mem 0x000c0000-0x000dffff]
[ 0.209360] pnp 00:00: disabling [mem 0x000d4000-0x000d7fff] because it overlaps 0000:00:02.0 BAR 6 [mem 0x000c0000-0x000dffff]
[ 0.209363] pnp 00:00: disabling [mem 0x000d8000-0x000dbfff] because it overlaps 0000:00:02.0 BAR 6 [mem 0x000c0000-0x000dffff]
[ 0.209367] pnp 00:00: disabling [mem 0x000dc000-0x000dffff] because it overlaps 0000:00:02.0 BAR 6 [mem 0x000c0000-0x000dffff]
[ 1.358190] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[ 1.364690] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x0000000000001863 (\PMI) (20220331/utaddress-204)
[ 1.364702] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\_SB.PCI0.LPC.PMIO) (20220331/utaddress-204)
[ 1.364712] ACPI Warning: SystemIO range 0x0000000000000840-0x000000000000084F conflicts with OpRegion 0x0000000000000800-0x0000000000000863 (\GPRL) (20220331/utaddress-204)
[ 1.364718] ACPI Warning: SystemIO range 0x0000000000000840-0x000000000000084F conflicts with OpRegion 0x0000000000000800-0x0000000000000BFF (\GPR) (20220331/utaddress-204)
[ 1.364725] ACPI Warning: SystemIO range 0x0000000000000840-0x000000000000084F conflicts with OpRegion 0x0000000000000800-0x000000000000085F (\_SB.PCI0.PEG.GPIO) (20220331/utaddress-204)
[ 1.364731] ACPI Warning: SystemIO range 0x0000000000000840-0x000000000000084F conflicts with OpRegion 0x0000000000000800-0x000000000000085F (\_SB.PCI0.LPC.EC.HKEY.GINV) (20220331/utaddress-204)
[ 1.364737] ACPI Warning: SystemIO range 0x0000000000000840-0x000000000000084F conflicts with OpRegion 0x0000000000000800-0x000000000000085F (\_GPE.GINV) (20220331/utaddress-204)
[ 1.364743] ACPI Warning: SystemIO range 0x0000000000000840-0x000000000000084F conflicts with OpRegion 0x0000000000000800-0x000000000000087F (\_SB.PCI0.LPC.LPIO) (20220331/utaddress-204)
[ 1.364750] ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083F conflicts with OpRegion 0x0000000000000800-0x0000000000000863 (\GPRL) (20220331/utaddress-204)
[ 1.364756] ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083F conflicts with OpRegion 0x0000000000000800-0x0000000000000BFF (\GPR) (20220331/utaddress-204)
[ 1.364761] ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083F conflicts with OpRegion 0x0000000000000800-0x000000000000085F (\_SB.PCI0.PEG.GPIO) (20220331/utaddress-204)
[ 1.364767] ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083F conflicts with OpRegion 0x0000000000000800-0x000000000000085F (\_SB.PCI0.LPC.EC.HKEY.GINV) (20220331/utaddress-204)
[ 1.364773] ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083F conflicts with OpRegion 0x0000000000000800-0x000000000000085F (\_GPE.GINV) (20220331/utaddress-204)
[ 1.364779] ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083F conflicts with OpRegion 0x0000000000000800-0x000000000000087F (\_SB.PCI0.LPC.LPIO) (20220331/utaddress-204)
[ 1.364786] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x0000000000000863 (\GPRL) (20220331/utaddress-204)
[ 1.364792] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x0000000000000BFF (\GPR) (20220331/utaddress-204)
[ 1.364797] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000085F (\_SB.PCI0.PEG.GPIO) (20220331/utaddress-204)
[ 1.364803] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000085F (\_SB.PCI0.LPC.EC.HKEY.GINV) (20220331/utaddress-204)
[ 1.364809] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000085F (\_GPE.GINV) (20220331/utaddress-204)
[ 1.364815] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000087F (\_SB.PCI0.LPC.LPIO) (20220331/utaddress-204)
[ 1.364821] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 1.559225] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.559981] usb: port power management may be unreliable
[ 9.614959] at24 0-0050: supply vcc not found, using dummy regulator
[ 28.795615] ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
[ 28.795625] ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
[ 28.795629] ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
[ 28.795632] ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
[ 28.795635] ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
[ 28.795638] ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
[ 28.795641] ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
[ 29.103971] ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
[ 29.103980] ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
[ 29.103984] ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
[ 29.103986] ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
[ 29.103989] ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
[ 29.103991] ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
[ 29.103994] ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
[ 29.688065] kauditd_printk_skb: 18 callbacks suppressed
#6 Re : Matériel » Problème avec Alsa et Pipewire (?) » 20-10-2022 14:32:02
Pas de trace de TPM dans le BIOS. J'ai activé et désactivé des options, notamment pour lancer l'UEFI seul ou pas (avec Legacy) : eh bé, môôôsssieur ne veut pas rester solitaire. Cela dit, je n'ai pas décidé de créer un mot de passe pour avoir d'autres options : le fais-je ?
Redémarrage (avec toujours le signalement du problème « ima: error communicating to tpm chip » qu'on retrouve dans le résultat de la commande ci-dessous), et voilà ce que cela donne dans le Terminal (peu de progrès, sinon aucun) :
Redémarrage (avec toujours le signalement du problème « ima: error communicating to tpm chip » qu'on retrouve dans le résultat de la commande ci-dessous), et voilà ce que cela donne dans le Terminal (peu de progrès, sinon aucun) :
journalctl -b -r -p err
oct. 20 14:22:19 debian systemd[1604]: Failed to start Tracker metadata extractor.
oct. 20 14:22:12 debian bluetoothd[582]: src/profile.c:record_cb() Unable to get Hands-Free Voice gateway SDP record: Host is down
oct. 20 14:22:07 debian bluetoothd[582]: src/profile.c:record_cb() Unable to get Hands-Free Voice gateway SDP record: Device or resource busy
oct. 20 14:22:07 debian bluetoothd[582]: profiles/audio/avdtp.c:avdtp_connect_cb() connect to F8:34:41:A5:10:80: Host is down (112)
oct. 20 14:22:03 debian gdm-launch-environment][735]: GLib-GObject: g_object_unref: assertion 'G_IS_OBJECT (object)' failed
oct. 20 14:22:01 debian bluetoothd[582]: profiles/audio/avdtp.c:avdtp_connect_cb() connect to 34:15:9E:90:07:AD: Host is down (112)
oct. 20 14:21:56 debian bluetoothd[582]: src/profile.c:record_cb() Unable to get Headset Voice gateway SDP record: Host is down
oct. 20 14:21:55 debian systemd[1604]: Failed to start Application launched by gnome-session-binary.
oct. 20 14:21:50 debian systemd[1604]: Failed to start Application launched by gnome-session-binary.
oct. 20 14:21:50 debian systemd[1604]: Failed to start Application launched by gnome-session-binary.
oct. 20 14:21:49 debian bluetoothd[582]: src/profile.c:ext_start_servers() RFCOMM server failed for Hands-Free Voice gateway: rfcomm_bind: Address al>
oct. 20 14:21:48 debian gdm-password][1588]: gkr-pam: unable to locate daemon control file
oct. 20 14:21:25 debian bluetoothd[582]: src/profile.c:record_cb() Unable to get Hands-Free Voice gateway SDP record: Host is down
oct. 20 14:21:20 debian bluetoothd[582]: src/profile.c:record_cb() Unable to get Hands-Free Voice gateway SDP record: Device or resource busy
oct. 20 14:21:20 debian bluetoothd[582]: profiles/audio/avdtp.c:avdtp_connect_cb() connect to F8:34:41:A5:10:80: Host is down (112)
oct. 20 14:21:15 debian bluetoothd[582]: profiles/audio/avdtp.c:avdtp_connect_cb() connect to 34:15:9E:90:07:AD: Host is down (112)
oct. 20 14:21:10 debian bluetoothd[582]: src/profile.c:record_cb() Unable to get Headset Voice gateway SDP record: Host is down
oct. 20 14:21:01 debian bluetoothd[582]: src/profile.c:ext_start_servers() RFCOMM server failed for Hands-Free Voice gateway: rfcomm_bind: Address al>
oct. 20 14:20:35 debian systemd[581]: bluetooth-autoconnect.service: Failed at step EXEC spawning /usr/bin/bluetooth-autoconnect: No such file or dir>
oct. 20 14:20:27 debian kernel: ima: Error Communicating to TPM chip
oct. 20 14:20:27 debian kernel: ima: Error Communicating to TPM chip
oct. 20 14:20:27 debian kernel: ima: Error Communicating to TPM chip
oct. 20 14:20:27 debian kernel: ima: Error Communicating to TPM chip
oct. 20 14:20:27 debian kernel: ima: Error Communicating to TPM chip
oct. 20 14:20:27 debian kernel: ima: Error Communicating to TPM chip
oct. 20 14:20:27 debian kernel: ima: Error Communicating to TPM chip
oct. 20 14:20:27 debian kernel: ima: Error Communicating to TPM chip
oct. 20 14:20:27 debian kernel: ACPI Error: Aborting method \_PR.CPU0._PDC due to previous error (AE_AML_OPERAND_TYPE) (20220331/psparse-529)
oct. 20 14:20:27 debian kernel: ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20220331/dswexec-431)
oct. 20 14:20:27 debian kernel: ACPI Error: Needed type [Reference], found [Integer] 0000000023a6a483 (20220331/exresop-66)
oct. 20 14:22:19 debian systemd[1604]: Failed to start Tracker metadata extractor.
oct. 20 14:22:12 debian bluetoothd[582]: src/profile.c:record_cb() Unable to get Hands-Free Voice gateway SDP record: Host is down
oct. 20 14:22:07 debian bluetoothd[582]: src/profile.c:record_cb() Unable to get Hands-Free Voice gateway SDP record: Device or resource busy
oct. 20 14:22:07 debian bluetoothd[582]: profiles/audio/avdtp.c:avdtp_connect_cb() connect to F8:34:41:A5:10:80: Host is down (112)
oct. 20 14:22:03 debian gdm-launch-environment][735]: GLib-GObject: g_object_unref: assertion 'G_IS_OBJECT (object)' failed
oct. 20 14:22:01 debian bluetoothd[582]: profiles/audio/avdtp.c:avdtp_connect_cb() connect to 34:15:9E:90:07:AD: Host is down (112)
oct. 20 14:21:56 debian bluetoothd[582]: src/profile.c:record_cb() Unable to get Headset Voice gateway SDP record: Host is down
oct. 20 14:21:55 debian systemd[1604]: Failed to start Application launched by gnome-session-binary.
oct. 20 14:21:50 debian systemd[1604]: Failed to start Application launched by gnome-session-binary.
oct. 20 14:21:50 debian systemd[1604]: Failed to start Application launched by gnome-session-binary.
oct. 20 14:21:49 debian bluetoothd[582]: src/profile.c:ext_start_servers() RFCOMM server failed for Hands-Free Voice gateway: rfcomm_bind: Address al>
oct. 20 14:21:48 debian gdm-password][1588]: gkr-pam: unable to locate daemon control file
oct. 20 14:21:25 debian bluetoothd[582]: src/profile.c:record_cb() Unable to get Hands-Free Voice gateway SDP record: Host is down
oct. 20 14:21:20 debian bluetoothd[582]: src/profile.c:record_cb() Unable to get Hands-Free Voice gateway SDP record: Device or resource busy
oct. 20 14:21:20 debian bluetoothd[582]: profiles/audio/avdtp.c:avdtp_connect_cb() connect to F8:34:41:A5:10:80: Host is down (112)
oct. 20 14:21:15 debian bluetoothd[582]: profiles/audio/avdtp.c:avdtp_connect_cb() connect to 34:15:9E:90:07:AD: Host is down (112)
oct. 20 14:21:10 debian bluetoothd[582]: src/profile.c:record_cb() Unable to get Headset Voice gateway SDP record: Host is down
oct. 20 14:21:01 debian bluetoothd[582]: src/profile.c:ext_start_servers() RFCOMM server failed for Hands-Free Voice gateway: rfcomm_bind: Address al>
oct. 20 14:20:35 debian systemd[581]: bluetooth-autoconnect.service: Failed at step EXEC spawning /usr/bin/bluetooth-autoconnect: No such file or dir>
oct. 20 14:20:27 debian kernel: ima: Error Communicating to TPM chip
oct. 20 14:20:27 debian kernel: ima: Error Communicating to TPM chip
oct. 20 14:20:27 debian kernel: ima: Error Communicating to TPM chip
oct. 20 14:20:27 debian kernel: ima: Error Communicating to TPM chip
oct. 20 14:20:27 debian kernel: ima: Error Communicating to TPM chip
oct. 20 14:20:27 debian kernel: ima: Error Communicating to TPM chip
oct. 20 14:20:27 debian kernel: ima: Error Communicating to TPM chip
oct. 20 14:20:27 debian kernel: ima: Error Communicating to TPM chip
oct. 20 14:20:27 debian kernel: ACPI Error: Aborting method \_PR.CPU0._PDC due to previous error (AE_AML_OPERAND_TYPE) (20220331/psparse-529)
oct. 20 14:20:27 debian kernel: ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20220331/dswexec-431)
oct. 20 14:20:27 debian kernel: ACPI Error: Needed type [Reference], found [Integer] 0000000023a6a483 (20220331/exresop-66)
#7 Re : Matériel » Problème avec Alsa et Pipewire (?) » 20-10-2022 12:21:19
anonyme a écrit :
Bonjour
pour TPM regarde si tu peu le désactiver dans le bios
Évidemment, il n'y apparaît pas… Je continue à chercher : il doit y avoir moyen de le désactiver.
#8 Re : Matériel » Problème avec Alsa et Pipewire (?) » 20-10-2022 11:38:17
À tout hasard, voici le contenu du fichier des sources
nano /etc/apt/sources.list
# Dépôt Testing principal (avec non-libres)
deb http://ftp.fr.debian.org/debian/ testing main contrib non-free
deb-src http://ftp.fr.debian.org/debian/ testing main contrib non-free
# Dépôts Testing mises à jour de sécurité (avec non-libres)
deb http://deb.debian.org/debian-security/ testing-security/updates main contrib non-free
deb-src http://deb.debian.org/debian-security/ testing-security/updates main contrib non-free
# Dépôt Testing updates ("volatile")
deb http://deb.debian.org/debian/ testing-updates main contrib non-free
deb-src http://deb.debian.org/debian/ testing-updates main contrib non-free
# Dépôt Testing backports
deb http://deb.debian.org/debian/ testing-backports main contrib non-free
deb-src http://deb.debian.org/debian/ testing-backports main contrib non-free
# Dépôt Testing proposed updates
deb http://deb.debian.org/debian/ testing-proposed-updates main contrib non-free
deb-src http://deb.debian.org/debian/ testing-proposed-updates main contrib non-free
## Dépôts Deb-Multimedia (désactivés le 11 oct. 2022)
# deb http://www.deb-multimedia.org testing main non-free
# deb-src http://www.deb-multimedia.org testing main non-free
# Dépôt Testing principal (avec non-libres)
deb http://ftp.fr.debian.org/debian/ testing main contrib non-free
deb-src http://ftp.fr.debian.org/debian/ testing main contrib non-free
# Dépôts Testing mises à jour de sécurité (avec non-libres)
deb http://deb.debian.org/debian-security/ testing-security/updates main contrib non-free
deb-src http://deb.debian.org/debian-security/ testing-security/updates main contrib non-free
# Dépôt Testing updates ("volatile")
deb http://deb.debian.org/debian/ testing-updates main contrib non-free
deb-src http://deb.debian.org/debian/ testing-updates main contrib non-free
# Dépôt Testing backports
deb http://deb.debian.org/debian/ testing-backports main contrib non-free
deb-src http://deb.debian.org/debian/ testing-backports main contrib non-free
# Dépôt Testing proposed updates
deb http://deb.debian.org/debian/ testing-proposed-updates main contrib non-free
deb-src http://deb.debian.org/debian/ testing-proposed-updates main contrib non-free
## Dépôts Deb-Multimedia (désactivés le 11 oct. 2022)
# deb http://www.deb-multimedia.org testing main non-free
# deb-src http://www.deb-multimedia.org testing main non-free
#9 Re : Matériel » Problème avec Alsa et Pipewire (?) » 20-10-2022 11:33:14
anonyme a écrit :
Bonjour
pour TPM regarde si tu peu le désactiver dans le bios
pour ton fil je comprend pas le titre "Alsa et Pipewire"
j'utilise pipewire avec pulseaudio (paquet "pipewire-pulse" ) (les paquets pipewire-jack et pipewire-alsa ne sont pas installés )
D'accord. Je redémarre.
Tu penses qu'il vaudrait mieux supprimer pipewire-alsa ? pipewire-jack n'est pas installé.
apt policy pipewire-alsa pipewire-jack pipewire-pulse
pipewire-alsa:
Installé : 0.3.59-1+b1
Candidat : 0.3.59-1+b1
Table de version :
*** 0.3.59-1+b1 500
500 http://ftp.fr.debian.org/debian testing/main amd64 Packages
100 /var/lib/dpkg/status
pipewire-jack:
Installé : (aucun)
Candidat : 0.3.59-1+b1
Table de version :
0.3.59-1+b1 500
500 http://ftp.fr.debian.org/debian testing/main amd64 Packages
pipewire-pulse:
Installé : 0.3.59-1+b1
Candidat : 0.3.59-1+b1
Table de version :
*** 0.3.59-1+b1 500
500 http://ftp.fr.debian.org/debian testing/main amd64 Packages
100 /var/lib/dpkg/status
pipewire-alsa:
Installé : 0.3.59-1+b1
Candidat : 0.3.59-1+b1
Table de version :
*** 0.3.59-1+b1 500
500 http://ftp.fr.debian.org/debian testing/main amd64 Packages
100 /var/lib/dpkg/status
pipewire-jack:
Installé : (aucun)
Candidat : 0.3.59-1+b1
Table de version :
0.3.59-1+b1 500
500 http://ftp.fr.debian.org/debian testing/main amd64 Packages
pipewire-pulse:
Installé : 0.3.59-1+b1
Candidat : 0.3.59-1+b1
Table de version :
*** 0.3.59-1+b1 500
500 http://ftp.fr.debian.org/debian testing/main amd64 Packages
100 /var/lib/dpkg/status
#10 Re : Matériel » Problème avec Alsa et Pipewire (?) » 20-10-2022 11:29:42
J'ai installé un autre paquet, et les lignes n'apparaissent plus. D'après ce post sur le forum Debian, le problème signalé par « W: Possible missing firmware /lib/firmware/i915/ » serait en rapport avec le firmware Realtek, justement…
Ce que confirme ce qu'on peut lire ici :
Ce que confirme ce qu'on peut lire ici :
apt-file search bxt_dmc
firmware-misc-nonfree: /lib/firmware/i915/bxt_dmc_ver1.bin
firmware-misc-nonfree: /lib/firmware/i915/bxt_dmc_ver1_07.bin
firmware-misc-nonfree: /lib/firmware/i915/bxt_dmc_ver1.bin
firmware-misc-nonfree: /lib/firmware/i915/bxt_dmc_ver1_07.bin
#11 Re : Matériel » Problème avec Alsa et Pipewire (?) » 20-10-2022 11:18:41
Merci de me donner de ton temps
anonyme a écrit :
je comprend pas trop ta configuration
Je ne suis un pro de la bidouille. Plus j'en apprends sur Debian, et plus je constate mes erreurs.
regarde si ceci est installé
apt policy firmware-realtek
OK. Le firmware n'est pas installé
firmware-realtek:
Installé : (aucun)
Candidat : 20210818-1
Table de version :
20210818-1 500
500 http://ftp.fr.debian.org/debian testing/non-free amd64 Packages
500 http://ftp.fr.debian.org/debian testing/non-free i386 Packages
Installé : (aucun)
Candidat : 20210818-1
Table de version :
20210818-1 500
500 http://ftp.fr.debian.org/debian testing/non-free amd64 Packages
500 http://ftp.fr.debian.org/debian testing/non-free i386 Packages
si non , installe le pour éviter les erreurs de "realtek"
OK : je le fais à l'instant. Résultat : c'est bon
firmware-realtek:
Installé : 20210818-1
Candidat : 20210818-1
Table de version :
*** 20210818-1 500
500 http://ftp.fr.debian.org/debian testing/non-free amd64 Packages
500 http://ftp.fr.debian.org/debian testing/non-free i386 Packages
100 /var/lib/dpkg/status
Installé : 20210818-1
Candidat : 20210818-1
Table de version :
*** 20210818-1 500
500 http://ftp.fr.debian.org/debian testing/non-free amd64 Packages
500 http://ftp.fr.debian.org/debian testing/non-free i386 Packages
100 /var/lib/dpkg/status
J'ai aussi :
firmware-linux:
Installé : 20210818-1
Candidat : 20210818-1
Table de version :
*** 20210818-1 500
500 http://ftp.fr.debian.org/debian testing/non-free amd64 Packages
500 http://ftp.fr.debian.org/debian testing/non-free i386 Packages
100 /var/lib/dpkg/status
firmware-misc-nonfree:
Installé : 20210818-1
Candidat : 20210818-1
Table de version :
*** 20210818-1 500
500 http://ftp.fr.debian.org/debian testing/non-free amd64 Packages
500 http://ftp.fr.debian.org/debian testing/non-free i386 Packages
100 /var/lib/dpkg/status
Installé : 20210818-1
Candidat : 20210818-1
Table de version :
*** 20210818-1 500
500 http://ftp.fr.debian.org/debian testing/non-free amd64 Packages
500 http://ftp.fr.debian.org/debian testing/non-free i386 Packages
100 /var/lib/dpkg/status
firmware-misc-nonfree:
Installé : 20210818-1
Candidat : 20210818-1
Table de version :
*** 20210818-1 500
500 http://ftp.fr.debian.org/debian testing/non-free amd64 Packages
500 http://ftp.fr.debian.org/debian testing/non-free i386 Packages
100 /var/lib/dpkg/status
Mais j'ai toujours ces dernières lignes inquiétantes à la fin, concernant un module i915. Je cherche ce à quoi cela se rapporte…
Les NOUVEAUX paquets suivants vont être installés :
firmware-realtek
0 paquets mis à jour, 1 nouvellement installés, 0 à enlever et 0 non mis à jour.
Il est nécessaire de télécharger 1031 ko d'archives. Après dépaquetage, 4109 ko seront utilisés.
Prendre : 1 http://ftp.fr.debian.org/debian testing/non-free amd64 firmware-realtek all 20210818-1 [1031 kB]
1031 ko téléchargés en 0s (2645 ko/s)
Récupération des rapports de bogue… Fait
Analyse des informations Trouvé/Corrigé… Fait
Sélection du paquet firmware-realtek précédemment désélectionné.
(Lecture de la base de données... 469852 fichiers et répertoires déjà installés.)
Préparation du dépaquetage de .../firmware-realtek_20210818-1_all.deb ...
Dépaquetage de firmware-realtek (20210818-1) ...
Paramétrage de firmware-realtek (20210818-1) ...
Traitement des actions différées (« triggers ») pour initramfs-tools (0.142) ...
update-initramfs: Generating /boot/initrd.img-5.19.0-2-amd64
W: Possible missing firmware /lib/firmware/i915/tgl_guc_69.0.3.bin for module i915
W: Possible missing firmware /lib/firmware/i915/adlp_guc_69.0.3.bin for module i915
W: Possible missing firmware /lib/firmware/i915/skl_guc_70.1.1.bin for module i915
W: Possible missing firmware /lib/firmware/i915/bxt_guc_70.1.1.bin for module i915
W: Possible missing firmware /lib/firmware/i915/kbl_guc_70.1.1.bin for module i915
W: Possible missing firmware /lib/firmware/i915/glk_guc_70.1.1.bin for module i915
W: Possible missing firmware /lib/firmware/i915/kbl_guc_70.1.1.bin for module i915
W: Possible missing firmware /lib/firmware/i915/kbl_guc_70.1.1.bin for module i915
W: Possible missing firmware /lib/firmware/i915/cml_guc_70.1.1.bin for module i915
W: Possible missing firmware /lib/firmware/i915/icl_guc_70.1.1.bin for module i915
W: Possible missing firmware /lib/firmware/i915/ehl_guc_70.1.1.bin for module i915
W: Possible missing firmware /lib/firmware/i915/ehl_guc_70.1.1.bin for module i915
W: Possible missing firmware /lib/firmware/i915/tgl_guc_70.1.1.bin for module i915
W: Possible missing firmware /lib/firmware/i915/tgl_guc_70.1.1.bin for module i915
W: Possible missing firmware /lib/firmware/i915/dg1_guc_70.1.1.bin for module i915
W: Possible missing firmware /lib/firmware/i915/tgl_guc_70.1.1.bin for module i915
W: Possible missing firmware /lib/firmware/i915/adlp_guc_70.1.1.bin for module i915
W: Possible missing firmware /lib/firmware/i915/dg2_guc_70.1.2.bin for module i915
W: Possible missing firmware /lib/firmware/i915/adlp_dmc_ver2_16.bin for module i915
firmware-realtek
0 paquets mis à jour, 1 nouvellement installés, 0 à enlever et 0 non mis à jour.
Il est nécessaire de télécharger 1031 ko d'archives. Après dépaquetage, 4109 ko seront utilisés.
Prendre : 1 http://ftp.fr.debian.org/debian testing/non-free amd64 firmware-realtek all 20210818-1 [1031 kB]
1031 ko téléchargés en 0s (2645 ko/s)
Récupération des rapports de bogue… Fait
Analyse des informations Trouvé/Corrigé… Fait
Sélection du paquet firmware-realtek précédemment désélectionné.
(Lecture de la base de données... 469852 fichiers et répertoires déjà installés.)
Préparation du dépaquetage de .../firmware-realtek_20210818-1_all.deb ...
Dépaquetage de firmware-realtek (20210818-1) ...
Paramétrage de firmware-realtek (20210818-1) ...
Traitement des actions différées (« triggers ») pour initramfs-tools (0.142) ...
update-initramfs: Generating /boot/initrd.img-5.19.0-2-amd64
W: Possible missing firmware /lib/firmware/i915/tgl_guc_69.0.3.bin for module i915
W: Possible missing firmware /lib/firmware/i915/adlp_guc_69.0.3.bin for module i915
W: Possible missing firmware /lib/firmware/i915/skl_guc_70.1.1.bin for module i915
W: Possible missing firmware /lib/firmware/i915/bxt_guc_70.1.1.bin for module i915
W: Possible missing firmware /lib/firmware/i915/kbl_guc_70.1.1.bin for module i915
W: Possible missing firmware /lib/firmware/i915/glk_guc_70.1.1.bin for module i915
W: Possible missing firmware /lib/firmware/i915/kbl_guc_70.1.1.bin for module i915
W: Possible missing firmware /lib/firmware/i915/kbl_guc_70.1.1.bin for module i915
W: Possible missing firmware /lib/firmware/i915/cml_guc_70.1.1.bin for module i915
W: Possible missing firmware /lib/firmware/i915/icl_guc_70.1.1.bin for module i915
W: Possible missing firmware /lib/firmware/i915/ehl_guc_70.1.1.bin for module i915
W: Possible missing firmware /lib/firmware/i915/ehl_guc_70.1.1.bin for module i915
W: Possible missing firmware /lib/firmware/i915/tgl_guc_70.1.1.bin for module i915
W: Possible missing firmware /lib/firmware/i915/tgl_guc_70.1.1.bin for module i915
W: Possible missing firmware /lib/firmware/i915/dg1_guc_70.1.1.bin for module i915
W: Possible missing firmware /lib/firmware/i915/tgl_guc_70.1.1.bin for module i915
W: Possible missing firmware /lib/firmware/i915/adlp_guc_70.1.1.bin for module i915
W: Possible missing firmware /lib/firmware/i915/dg2_guc_70.1.2.bin for module i915
W: Possible missing firmware /lib/firmware/i915/adlp_dmc_ver2_16.bin for module i915
ps: mon module wifi AC + bluetooth 5 est un chipset intel (firmware-iwlwifi) en PCIe + USB
et une carte réseau realtek (filaire)
sur debian bookworm
OK. Voici ce qu'il y a sur mon ThinkPad E540 (en testing) :
Chipset Mobile Intel HM87 Express Chipset
PCIe Mini Card One PCI Express Half Mini Card slot
PCIe WLAN Some: 11b/g/n, PCIe Half Mini Card, Intel Wireless-N 7260, Wi-Fi + Bluetooth, 2x2
Some: 11ac, PCIe Half Mini Card, Intel Dual Band Wireless-AC 7260, Wi-Fi + Bluetooth, 2x2
Bluetooth Bluetooth 4.0 wireless, integrated in selected WLAN PCIe Half Mini Card
Ethernet Realtek RTL8111GUS Gigabit Network Connection
#12 Re : Matériel » Problème avec Alsa et Pipewire (?) » 19-10-2022 18:12:41
Merci de ta réponse. Voici ce que donne
journalctl -b -r -p err
oct. 19 18:06:45 debian obexd[2574]: connect to F4:F1:E1:C8:75:F1: Connection refused (111)
oct. 19 18:06:44 debian obexd[2574]: connect to F4:F1:E1:C8:75:F1: Connection refused (111)
oct. 19 18:06:38 debian obexd[2574]: connect to F4:F1:E1:C8:75:F1: Connection reset by peer (104)
oct. 19 18:06:01 debian kernel: Bluetooth: hci0: ACL packet for unknown connection handle 256
oct. 19 18:04:39 debian bluetoothd[594]: profiles/audio/avdtp.c:avdtp_connect_cb() connect to F8:34:41:A5:10:80: Too many levels of symbolic links (4>
oct. 19 18:04:36 debian bluetoothd[594]: src/service.c:btd_service_connect() a2dp-source profile connect failed for F8:34:41:A5:10:80: Device or reso>
oct. 19 18:04:36 debian bluetoothd[594]: profiles/audio/avdtp.c:avdtp_connect_cb() connect to F8:34:41:A5:10:80: Too many levels of symbolic links (4>
oct. 19 18:04:34 debian bluetoothd[594]: src/service.c:btd_service_connect() a2dp-source profile connect failed for F8:34:41:A5:10:80: Device or reso>
oct. 19 18:04:34 debian bluetoothd[594]: profiles/audio/avdtp.c:avdtp_connect_cb() connect to F8:34:41:A5:10:80: Too many levels of symbolic links (4>
oct. 19 18:04:32 debian bluetoothd[594]: profiles/audio/avdtp.c:avdtp_connect_cb() connect to F8:34:41:A5:10:80: Too many levels of symbolic links (4>
oct. 19 18:04:29 debian bluetoothd[594]: src/service.c:btd_service_connect() a2dp-source profile connect failed for F8:34:41:A5:10:80: Device or reso>
oct. 19 18:04:29 debian bluetoothd[594]: profiles/audio/avdtp.c:avdtp_connect_cb() connect to F8:34:41:A5:10:80: Permission denied (13)
oct. 19 18:04:21 debian bluetoothd[594]: profiles/audio/avdtp.c:avdtp_connect_cb() connect to F8:34:41:A5:10:80: Too many levels of symbolic links (4>
oct. 19 18:04:17 debian bluetoothd[594]: src/service.c:btd_service_connect() a2dp-source profile connect failed for F8:34:41:A5:10:80: Device or reso>
oct. 19 18:04:17 debian bluetoothd[594]: profiles/audio/avdtp.c:avdtp_connect_cb() connect to F8:34:41:A5:10:80: Permission denied (13)
oct. 19 18:04:03 debian bluetoothd[594]: profiles/audio/avdtp.c:avdtp_connect_cb() connect to F8:34:41:A5:10:80: Too many levels of symbolic links (4>
oct. 19 18:04:00 debian bluetoothd[594]: src/service.c:btd_service_connect() a2dp-source profile connect failed for F8:34:41:A5:10:80: Device or reso>
oct. 19 18:04:00 debian bluetoothd[594]: profiles/audio/avdtp.c:avdtp_connect_cb() connect to F8:34:41:A5:10:80: Permission denied (13)
oct. 19 17:27:00 debian systemd[1624]: Failed to start Tracker metadata extractor.
oct. 19 17:26:53 debian bluetoothd[594]: src/profile.c:record_cb() Unable to get Hands-Free Voice gateway SDP record: Host is down
oct. 19 17:26:47 debian bluetoothd[594]: src/profile.c:record_cb() Unable to get Hands-Free Voice gateway SDP record: Device or resource busy
oct. 19 17:26:47 debian bluetoothd[594]: profiles/audio/avdtp.c:avdtp_connect_cb() connect to F8:34:41:A5:10:80: Host is down (112)
oct. 19 17:26:44 debian gdm-launch-environment][738]: GLib-GObject: g_object_unref: assertion 'G_IS_OBJECT (object)' failed
oct. 19 17:26:42 debian bluetoothd[594]: profiles/audio/avdtp.c:avdtp_connect_cb() connect to 34:15:9E:90:07:AD: Host is down (112)
oct. 19 17:26:37 debian bluetoothd[594]: src/profile.c:record_cb() Unable to get Headset Voice gateway SDP record: Host is down
oct. 19 17:26:31 debian systemd[1624]: Failed to start Application launched by gnome-session-binary.
oct. 19 17:26:30 debian bluetoothd[594]: src/profile.c:ext_start_servers() RFCOMM server failed for Hands-Free Voice gateway: rfcomm_bind: Address al>
oct. 19 17:26:29 debian gdm-password][1610]: gkr-pam: unable to locate daemon control file
oct. 19 17:25:09 debian bluetoothd[594]: profiles/audio/avdtp.c:avdtp_connect_cb() connect to F8:34:41:A5:10:80: Too many levels of symbolic links (4>
oct. 19 17:25:09 debian bluetoothd[594]: src/profile.c:record_cb() Unable to get Hands-Free Voice gateway SDP record: Host is down
oct. 19 17:25:05 debian bluetoothd[594]: profiles/audio/avdtp.c:avdtp_connect_cb() connect to F8:34:41:A5:10:80: Permission denied (13)
oct. 19 17:25:04 debian bluetoothd[594]: src/profile.c:record_cb() Unable to get Hands-Free Voice gateway SDP record: Device or resource busy
oct. 19 17:25:04 debian bluetoothd[594]: profiles/audio/avdtp.c:avdtp_connect_cb() connect to 34:15:9E:90:07:AD: Host is down (112)
oct. 19 17:24:59 debian bluetoothd[594]: src/profile.c:record_cb() Unable to get Headset Voice gateway SDP record: Host is down
oct. 19 17:24:51 debian bluetoothd[594]: src/profile.c:ext_start_servers() RFCOMM server failed for Hands-Free Voice gateway: rfcomm_bind: Address al>
oct. 19 17:24:37 debian kernel: r8169 0000:03:00.0: Unable to load firmware rtl_nic/rtl8168g-3.fw (-2)
oct. 19 17:24:37 debian kernel: r8169 0000:03:00.0: firmware: failed to load rtl_nic/rtl8168g-3.fw (-2)
oct. 19 17:24:37 debian kernel: firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware
oct. 19 17:24:37 debian kernel: r8169 0000:03:00.0: firmware: failed to load rtl_nic/rtl8168g-3.fw (-2)
oct. 19 17:24:28 debian systemd[593]: bluetooth-autoconnect.service: Failed at step EXEC spawning /usr/bin/bluetooth-autoconnect: No such file or dir>
oct. 19 17:24:17 debian kernel: ima: Error Communicating to TPM chip
oct. 19 17:24:17 debian kernel: ima: Error Communicating to TPM chip
oct. 19 17:24:17 debian kernel: ima: Error Communicating to TPM chip
oct. 19 17:24:17 debian kernel: ima: Error Communicating to TPM chip
oct. 19 17:24:17 debian kernel: ima: Error Communicating to TPM chip
oct. 19 17:24:17 debian kernel: ima: Error Communicating to TPM chip
oct. 19 17:24:17 debian kernel: ima: Error Communicating to TPM chip
oct. 19 17:24:17 debian kernel: ima: Error Communicating to TPM chip
oct. 19 17:24:17 debian kernel: ACPI Error: Aborting method \_PR.CPU0._PDC due to previous error (AE_AML_OPERAND_TYPE) (20220331/psparse-529)
oct. 19 17:24:17 debian kernel: ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20220331/dswexec-431)
oct. 19 17:24:17 debian kernel: ACPI Error: Needed type [Reference], found [Integer] 00000000d8e6f93b (20220331/exresop-66)
oct. 19 18:06:44 debian obexd[2574]: connect to F4:F1:E1:C8:75:F1: Connection refused (111)
oct. 19 18:06:38 debian obexd[2574]: connect to F4:F1:E1:C8:75:F1: Connection reset by peer (104)
oct. 19 18:06:01 debian kernel: Bluetooth: hci0: ACL packet for unknown connection handle 256
oct. 19 18:04:39 debian bluetoothd[594]: profiles/audio/avdtp.c:avdtp_connect_cb() connect to F8:34:41:A5:10:80: Too many levels of symbolic links (4>
oct. 19 18:04:36 debian bluetoothd[594]: src/service.c:btd_service_connect() a2dp-source profile connect failed for F8:34:41:A5:10:80: Device or reso>
oct. 19 18:04:36 debian bluetoothd[594]: profiles/audio/avdtp.c:avdtp_connect_cb() connect to F8:34:41:A5:10:80: Too many levels of symbolic links (4>
oct. 19 18:04:34 debian bluetoothd[594]: src/service.c:btd_service_connect() a2dp-source profile connect failed for F8:34:41:A5:10:80: Device or reso>
oct. 19 18:04:34 debian bluetoothd[594]: profiles/audio/avdtp.c:avdtp_connect_cb() connect to F8:34:41:A5:10:80: Too many levels of symbolic links (4>
oct. 19 18:04:32 debian bluetoothd[594]: profiles/audio/avdtp.c:avdtp_connect_cb() connect to F8:34:41:A5:10:80: Too many levels of symbolic links (4>
oct. 19 18:04:29 debian bluetoothd[594]: src/service.c:btd_service_connect() a2dp-source profile connect failed for F8:34:41:A5:10:80: Device or reso>
oct. 19 18:04:29 debian bluetoothd[594]: profiles/audio/avdtp.c:avdtp_connect_cb() connect to F8:34:41:A5:10:80: Permission denied (13)
oct. 19 18:04:21 debian bluetoothd[594]: profiles/audio/avdtp.c:avdtp_connect_cb() connect to F8:34:41:A5:10:80: Too many levels of symbolic links (4>
oct. 19 18:04:17 debian bluetoothd[594]: src/service.c:btd_service_connect() a2dp-source profile connect failed for F8:34:41:A5:10:80: Device or reso>
oct. 19 18:04:17 debian bluetoothd[594]: profiles/audio/avdtp.c:avdtp_connect_cb() connect to F8:34:41:A5:10:80: Permission denied (13)
oct. 19 18:04:03 debian bluetoothd[594]: profiles/audio/avdtp.c:avdtp_connect_cb() connect to F8:34:41:A5:10:80: Too many levels of symbolic links (4>
oct. 19 18:04:00 debian bluetoothd[594]: src/service.c:btd_service_connect() a2dp-source profile connect failed for F8:34:41:A5:10:80: Device or reso>
oct. 19 18:04:00 debian bluetoothd[594]: profiles/audio/avdtp.c:avdtp_connect_cb() connect to F8:34:41:A5:10:80: Permission denied (13)
oct. 19 17:27:00 debian systemd[1624]: Failed to start Tracker metadata extractor.
oct. 19 17:26:53 debian bluetoothd[594]: src/profile.c:record_cb() Unable to get Hands-Free Voice gateway SDP record: Host is down
oct. 19 17:26:47 debian bluetoothd[594]: src/profile.c:record_cb() Unable to get Hands-Free Voice gateway SDP record: Device or resource busy
oct. 19 17:26:47 debian bluetoothd[594]: profiles/audio/avdtp.c:avdtp_connect_cb() connect to F8:34:41:A5:10:80: Host is down (112)
oct. 19 17:26:44 debian gdm-launch-environment][738]: GLib-GObject: g_object_unref: assertion 'G_IS_OBJECT (object)' failed
oct. 19 17:26:42 debian bluetoothd[594]: profiles/audio/avdtp.c:avdtp_connect_cb() connect to 34:15:9E:90:07:AD: Host is down (112)
oct. 19 17:26:37 debian bluetoothd[594]: src/profile.c:record_cb() Unable to get Headset Voice gateway SDP record: Host is down
oct. 19 17:26:31 debian systemd[1624]: Failed to start Application launched by gnome-session-binary.
oct. 19 17:26:30 debian bluetoothd[594]: src/profile.c:ext_start_servers() RFCOMM server failed for Hands-Free Voice gateway: rfcomm_bind: Address al>
oct. 19 17:26:29 debian gdm-password][1610]: gkr-pam: unable to locate daemon control file
oct. 19 17:25:09 debian bluetoothd[594]: profiles/audio/avdtp.c:avdtp_connect_cb() connect to F8:34:41:A5:10:80: Too many levels of symbolic links (4>
oct. 19 17:25:09 debian bluetoothd[594]: src/profile.c:record_cb() Unable to get Hands-Free Voice gateway SDP record: Host is down
oct. 19 17:25:05 debian bluetoothd[594]: profiles/audio/avdtp.c:avdtp_connect_cb() connect to F8:34:41:A5:10:80: Permission denied (13)
oct. 19 17:25:04 debian bluetoothd[594]: src/profile.c:record_cb() Unable to get Hands-Free Voice gateway SDP record: Device or resource busy
oct. 19 17:25:04 debian bluetoothd[594]: profiles/audio/avdtp.c:avdtp_connect_cb() connect to 34:15:9E:90:07:AD: Host is down (112)
oct. 19 17:24:59 debian bluetoothd[594]: src/profile.c:record_cb() Unable to get Headset Voice gateway SDP record: Host is down
oct. 19 17:24:51 debian bluetoothd[594]: src/profile.c:ext_start_servers() RFCOMM server failed for Hands-Free Voice gateway: rfcomm_bind: Address al>
oct. 19 17:24:37 debian kernel: r8169 0000:03:00.0: Unable to load firmware rtl_nic/rtl8168g-3.fw (-2)
oct. 19 17:24:37 debian kernel: r8169 0000:03:00.0: firmware: failed to load rtl_nic/rtl8168g-3.fw (-2)
oct. 19 17:24:37 debian kernel: firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware
oct. 19 17:24:37 debian kernel: r8169 0000:03:00.0: firmware: failed to load rtl_nic/rtl8168g-3.fw (-2)
oct. 19 17:24:28 debian systemd[593]: bluetooth-autoconnect.service: Failed at step EXEC spawning /usr/bin/bluetooth-autoconnect: No such file or dir>
oct. 19 17:24:17 debian kernel: ima: Error Communicating to TPM chip
oct. 19 17:24:17 debian kernel: ima: Error Communicating to TPM chip
oct. 19 17:24:17 debian kernel: ima: Error Communicating to TPM chip
oct. 19 17:24:17 debian kernel: ima: Error Communicating to TPM chip
oct. 19 17:24:17 debian kernel: ima: Error Communicating to TPM chip
oct. 19 17:24:17 debian kernel: ima: Error Communicating to TPM chip
oct. 19 17:24:17 debian kernel: ima: Error Communicating to TPM chip
oct. 19 17:24:17 debian kernel: ima: Error Communicating to TPM chip
oct. 19 17:24:17 debian kernel: ACPI Error: Aborting method \_PR.CPU0._PDC due to previous error (AE_AML_OPERAND_TYPE) (20220331/psparse-529)
oct. 19 17:24:17 debian kernel: ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20220331/dswexec-431)
oct. 19 17:24:17 debian kernel: ACPI Error: Needed type [Reference], found [Integer] 00000000d8e6f93b (20220331/exresop-66)
Et c'est la bonne date…Toujours ces
debian kernel: ima: Error Communicating to TPM chip
, déjà évoqués. Un firmware installé qui n'a rien à faire sur l'ordinateur (rtl8168g-3). Les premières lignes concernant un périphérique (F4:F1:E1:C8:75:F1)
#13 Matériel » Problème avec Alsa et Pipewire (?) » 17-10-2022 14:05:14
- fred02840
- Réponses : 14
Bonjour,
En affichant ce qui suit, j'ai une répétition des deux lignes que vous allez voir. Le son sort correctement, mais je me demande bien ce qui se passe, et surtout si cela correspond à un réel problème
En affichant ce qui suit, j'ai une répétition des deux lignes que vous allez voir. Le son sort correctement, mais je me demande bien ce qui se passe, et surtout si cela correspond à un réel problème
journalctl
sept. 28 14:53:49 debian pipewire[1398]: spa.alsa: hw:1,3: snd_pcm_avail after recover: Relais brisé (pipe)
sept. 28 14:53:49 debian pipewire[1398]: spa.alsa: hw:1,7: snd_pcm_avail after recover: Relais brisé (pipe)
sept. 28 14:53:49 debian pipewire[1398]: spa.alsa: hw:1,3: snd_pcm_avail after recover: Relais brisé (pipe)
sept. 28 14:53:49 debian pipewire[1398]: spa.alsa: hw:1,7: snd_pcm_avail after recover: Relais brisé (pipe)
#14 Re : Matériel » Codec SBC-XQ » 17-10-2022 13:47:10
robert2 a écrit :
,
voila le genre de paquet pour aptx (version free) , par exemple
apt policy libfreeaptx0
libfreeaptx0:
Installé : 0.1.1-2
Candidat : 0.1.1-2
Table de version :
*** 0.1.1-2 500
500 https://deb.debian.org/debian bookworm/main amd64 Packages
100 /var/lib/dpkg/status
Voilà ce que donne
apt policy libfreeaptx0
libfreeaptx0:
Installé : 0.1.1-2
Candidat : 0.1.1-2
Table de version :
*** 0.1.1-2 500
500 http://ftp.fr.debian.org/debian testing/main amd64 Packages
100 /var/lib/dpkg/status
libfreeaptx0:
Installé : 0.1.1-2
Candidat : 0.1.1-2
Table de version :
*** 0.1.1-2 500
500 http://ftp.fr.debian.org/debian testing/main amd64 Packages
100 /var/lib/dpkg/status
Là, j'ai tout bon…
#15 Re : Matériel » Codec SBC-XQ » 17-10-2022 13:37:11
anonyme a écrit :
on remet une couche
deux paquets présent : libsbc1 et sbc-tools
mais bon la qualité dépend aussi du fichier sources audio (Spécification de l’échantillon : s16le 2ch 44100Hz ) et de la qualité des HP (ou casque)
ps: c'est un rip de cd audio en "flac"
Voilà ce que donne
pactl list sinks
. Je balance tout : hop !
Sink #51
State: SUSPENDED
Name: alsa_output.pci-0000_00_03.0.pro-output-3
Description: Audio interne Pro
Driver: PipeWire
Sample Specification: s32le 8ch 48000Hz
Channel Map: aux0,aux1,aux2,aux3,aux4,aux5,aux6,aux7
Owner Module: 4294967295
Mute: no
Volume: aux0: 48616 / 74% / -7,78 dB, aux1: 48616 / 74% / -7,78 dB, aux2: 48616 / 74% / -7,78 dB, aux3: 48616 / 74% / -7,78 dB, aux4: 48616 / 74% / -7,78 dB, aux5: 48616 / 74% / -7,78 dB, aux6: 48616 / 74% / -7,78 dB, aux7: 48616 / 74% / -7,78 dB
balance 0,00
Base Volume: 65536 / 100% / 0,00 dB
Monitor Source: alsa_output.pci-0000_00_03.0.pro-output-3.monitor
Latency: 0 usec, configured 0 usec
Flags: HARDWARE DECIBEL_VOLUME LATENCY
Properties:
alsa.card = "1"
alsa.card_name = "HDA Intel HDMI"
alsa.class = "generic"
alsa.device = "3"
alsa.driver_name = "snd_hda_intel"
alsa.id = "HDMI 0"
alsa.long_card_name = "HDA Intel HDMI at 0xf1610000 irq 42"
alsa.name = "HDMI 0"
alsa.resolution_bits = "32"
alsa.subclass = "generic-mix"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
api.alsa.card.longname = "HDA Intel HDMI at 0xf1610000 irq 42"
api.alsa.card.name = "HDA Intel HDMI"
api.alsa.path = "hw:1,3"
api.alsa.pcm.card = "1"
api.alsa.pcm.stream = "playback"
audio.channels = "8"
audio.position = "AUX0,AUX1,AUX2,AUX3,AUX4,AUX5,AUX6,AUX7"
card.profile.device = "0"
clock.name = "api.alsa.1"
device.api = "alsa"
device.class = "sound"
device.id = "42"
device.profile.description = "Pro"
device.profile.name = "pro-output-3"
device.routes = "0"
factory.name = "api.alsa.pcm.sink"
media.class = "Audio/Sink"
device.description = "Audio interne"
node.name = "alsa_output.pci-0000_00_03.0.pro-output-3"
node.nick = "HDMI 0"
node.pause-on-idle = "false"
object.path = "alsa:pcm:1:hw:1,3:playback"
priority.driver = "696"
priority.session = "696"
factory.id = "18"
clock.quantum-limit = "8192"
client.id = "34"
node.driver = "true"
factory.mode = "merge"
audio.adapt.follower = ""
library.name = "audioconvert/libspa-audioconvert"
object.id = "50"
object.serial = "51"
api.acp.auto-port = "false"
api.acp.auto-profile = "false"
api.alsa.card = "1"
api.alsa.use-acp = "true"
api.dbus.ReserveDevice1 = "Audio1"
device.bus = "pci"
device.bus_path = "pci-0000:00:03.0"
device.enum.api = "udev"
device.form_factor = "internal"
device.icon_name = "audio-card-analog-pci"
device.name = "alsa_card.pci-0000_00_03.0"
device.nick = "HDA Intel HDMI"
device.plugged.usec = "11531455"
device.product.id = "0x0c0c"
device.product.name = "Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller"
device.subsystem = "sound"
sysfs.path = "/sys/devices/pci0000:00/0000:00:03.0/sound/card1"
device.vendor.id = "0x8086"
device.vendor.name = "Intel Corporation"
device.string = "1"
Formats:
pcm
Sink #52
State: SUSPENDED
Name: alsa_output.pci-0000_00_03.0.pro-output-7
Description: Audio interne Pro 7
Driver: PipeWire
Sample Specification: s32le 8ch 48000Hz
Channel Map: aux0,aux1,aux2,aux3,aux4,aux5,aux6,aux7
Owner Module: 4294967295
Mute: yes
Volume: aux0: 65536 / 100% / 0,00 dB, aux1: 65536 / 100% / 0,00 dB, aux2: 65536 / 100% / 0,00 dB, aux3: 65536 / 100% / 0,00 dB, aux4: 65536 / 100% / 0,00 dB, aux5: 65536 / 100% / 0,00 dB, aux6: 65536 / 100% / 0,00 dB, aux7: 65536 / 100% / 0,00 dB
balance 0,00
Base Volume: 65536 / 100% / 0,00 dB
Monitor Source: alsa_output.pci-0000_00_03.0.pro-output-7.monitor
Latency: 0 usec, configured 0 usec
Flags: HARDWARE DECIBEL_VOLUME LATENCY
Properties:
alsa.card = "1"
alsa.card_name = "HDA Intel HDMI"
alsa.class = "generic"
alsa.device = "7"
alsa.driver_name = "snd_hda_intel"
alsa.id = "HDMI 1"
alsa.long_card_name = "HDA Intel HDMI at 0xf1610000 irq 42"
alsa.name = "HDMI 1"
alsa.resolution_bits = "32"
alsa.subclass = "generic-mix"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
api.alsa.card.longname = "HDA Intel HDMI at 0xf1610000 irq 42"
api.alsa.card.name = "HDA Intel HDMI"
api.alsa.path = "hw:1,7"
api.alsa.pcm.card = "1"
api.alsa.pcm.stream = "playback"
audio.channels = "8"
audio.position = "AUX0,AUX1,AUX2,AUX3,AUX4,AUX5,AUX6,AUX7"
card.profile.device = "1"
clock.name = "api.alsa.1"
device.api = "alsa"
device.class = "sound"
device.id = "42"
device.profile.description = "Pro 7"
device.profile.name = "pro-output-7"
device.routes = "0"
factory.name = "api.alsa.pcm.sink"
media.class = "Audio/Sink"
device.description = "Audio interne"
node.name = "alsa_output.pci-0000_00_03.0.pro-output-7"
node.nick = "HDMI 1"
node.pause-on-idle = "false"
object.path = "alsa:pcm:1:hw:1,7:playback"
priority.driver = "632"
priority.session = "632"
factory.id = "18"
clock.quantum-limit = "8192"
client.id = "34"
node.driver = "true"
factory.mode = "merge"
audio.adapt.follower = ""
library.name = "audioconvert/libspa-audioconvert"
object.id = "51"
object.serial = "52"
api.acp.auto-port = "false"
api.acp.auto-profile = "false"
api.alsa.card = "1"
api.alsa.use-acp = "true"
api.dbus.ReserveDevice1 = "Audio1"
device.bus = "pci"
device.bus_path = "pci-0000:00:03.0"
device.enum.api = "udev"
device.form_factor = "internal"
device.icon_name = "audio-card-analog-pci"
device.name = "alsa_card.pci-0000_00_03.0"
device.nick = "HDA Intel HDMI"
device.plugged.usec = "11531455"
device.product.id = "0x0c0c"
device.product.name = "Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller"
device.subsystem = "sound"
sysfs.path = "/sys/devices/pci0000:00/0000:00:03.0/sound/card1"
device.vendor.id = "0x8086"
device.vendor.name = "Intel Corporation"
device.string = "1"
Formats:
pcm
Sink #53
State: SUSPENDED
Name: alsa_output.pci-0000_00_03.0.pro-output-8
Description: Audio interne Pro 8
Driver: PipeWire
Sample Specification: s32le 8ch 48000Hz
Channel Map: aux0,aux1,aux2,aux3,aux4,aux5,aux6,aux7
Owner Module: 4294967295
Mute: yes
Volume: aux0: 62188 / 95% / -1,37 dB, aux1: 62188 / 95% / -1,37 dB, aux2: 62188 / 95% / -1,37 dB, aux3: 62188 / 95% / -1,37 dB, aux4: 62188 / 95% / -1,37 dB, aux5: 62188 / 95% / -1,37 dB, aux6: 62188 / 95% / -1,37 dB, aux7: 62188 / 95% / -1,37 dB
balance 0,00
Base Volume: 65536 / 100% / 0,00 dB
Monitor Source: alsa_output.pci-0000_00_03.0.pro-output-8.monitor
Latency: 0 usec, configured 0 usec
Flags: HARDWARE DECIBEL_VOLUME LATENCY
Properties:
alsa.card = "1"
alsa.card_name = "HDA Intel HDMI"
alsa.class = "generic"
alsa.device = "8"
alsa.driver_name = "snd_hda_intel"
alsa.id = "HDMI 2"
alsa.long_card_name = "HDA Intel HDMI at 0xf1610000 irq 42"
alsa.name = "HDMI 2"
alsa.resolution_bits = "32"
alsa.subclass = "generic-mix"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
api.alsa.card.longname = "HDA Intel HDMI at 0xf1610000 irq 42"
api.alsa.card.name = "HDA Intel HDMI"
api.alsa.path = "hw:1,8"
api.alsa.pcm.card = "1"
api.alsa.pcm.stream = "playback"
audio.channels = "8"
audio.position = "AUX0,AUX1,AUX2,AUX3,AUX4,AUX5,AUX6,AUX7"
card.profile.device = "2"
clock.name = "api.alsa.1"
device.api = "alsa"
device.class = "sound"
device.id = "42"
device.profile.description = "Pro 8"
device.profile.name = "pro-output-8"
device.routes = "0"
factory.name = "api.alsa.pcm.sink"
media.class = "Audio/Sink"
device.description = "Audio interne"
node.name = "alsa_output.pci-0000_00_03.0.pro-output-8"
node.nick = "HDMI 2"
node.pause-on-idle = "false"
object.path = "alsa:pcm:1:hw:1,8:playback"
priority.driver = "616"
priority.session = "616"
factory.id = "18"
clock.quantum-limit = "8192"
client.id = "34"
node.driver = "true"
factory.mode = "merge"
audio.adapt.follower = ""
library.name = "audioconvert/libspa-audioconvert"
object.id = "52"
object.serial = "53"
api.acp.auto-port = "false"
api.acp.auto-profile = "false"
api.alsa.card = "1"
api.alsa.use-acp = "true"
api.dbus.ReserveDevice1 = "Audio1"
device.bus = "pci"
device.bus_path = "pci-0000:00:03.0"
device.enum.api = "udev"
device.form_factor = "internal"
device.icon_name = "audio-card-analog-pci"
device.name = "alsa_card.pci-0000_00_03.0"
device.nick = "HDA Intel HDMI"
device.plugged.usec = "11531455"
device.product.id = "0x0c0c"
device.product.name = "Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller"
device.subsystem = "sound"
sysfs.path = "/sys/devices/pci0000:00/0000:00:03.0/sound/card1"
device.vendor.id = "0x8086"
device.vendor.name = "Intel Corporation"
device.string = "1"
Formats:
pcm
Sink #54
State: SUSPENDED
Name: alsa_output.pci-0000_00_03.0.pro-output-9
Description: Audio interne Pro 9
Driver: PipeWire
Sample Specification: s32le 8ch 48000Hz
Channel Map: aux0,aux1,aux2,aux3,aux4,aux5,aux6,aux7
Owner Module: 4294967295
Mute: yes
Volume: aux0: 65936 / 101% / 0,16 dB, aux1: 65936 / 101% / 0,16 dB, aux2: 65936 / 101% / 0,16 dB, aux3: 65936 / 101% / 0,16 dB, aux4: 65936 / 101% / 0,16 dB, aux5: 65936 / 101% / 0,16 dB, aux6: 65936 / 101% / 0,16 dB, aux7: 65936 / 101% / 0,16 dB
balance 0,00
Base Volume: 65536 / 100% / 0,00 dB
Monitor Source: alsa_output.pci-0000_00_03.0.pro-output-9.monitor
Latency: 0 usec, configured 0 usec
Flags: HARDWARE DECIBEL_VOLUME LATENCY
Properties:
alsa.card = "1"
alsa.card_name = "HDA Intel HDMI"
alsa.class = "generic"
alsa.device = "9"
alsa.driver_name = "snd_hda_intel"
alsa.id = "HDMI 3"
alsa.long_card_name = "HDA Intel HDMI at 0xf1610000 irq 42"
alsa.name = "HDMI 3"
alsa.resolution_bits = "32"
alsa.subclass = "generic-mix"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
api.alsa.card.longname = "HDA Intel HDMI at 0xf1610000 irq 42"
api.alsa.card.name = "HDA Intel HDMI"
api.alsa.path = "hw:1,9"
api.alsa.pcm.card = "1"
api.alsa.pcm.stream = "playback"
audio.channels = "8"
audio.position = "AUX0,AUX1,AUX2,AUX3,AUX4,AUX5,AUX6,AUX7"
card.profile.device = "3"
clock.name = "api.alsa.1"
device.api = "alsa"
device.class = "sound"
device.id = "42"
device.profile.description = "Pro 9"
device.profile.name = "pro-output-9"
device.routes = "0"
factory.name = "api.alsa.pcm.sink"
media.class = "Audio/Sink"
device.description = "Audio interne"
node.name = "alsa_output.pci-0000_00_03.0.pro-output-9"
node.nick = "HDMI 3"
node.pause-on-idle = "false"
object.path = "alsa:pcm:1:hw:1,9:playback"
priority.driver = "600"
priority.session = "600"
factory.id = "18"
clock.quantum-limit = "8192"
client.id = "34"
node.driver = "true"
factory.mode = "merge"
audio.adapt.follower = ""
library.name = "audioconvert/libspa-audioconvert"
object.id = "53"
object.serial = "54"
api.acp.auto-port = "false"
api.acp.auto-profile = "false"
api.alsa.card = "1"
api.alsa.use-acp = "true"
api.dbus.ReserveDevice1 = "Audio1"
device.bus = "pci"
device.bus_path = "pci-0000:00:03.0"
device.enum.api = "udev"
device.form_factor = "internal"
device.icon_name = "audio-card-analog-pci"
device.name = "alsa_card.pci-0000_00_03.0"
device.nick = "HDA Intel HDMI"
device.plugged.usec = "11531455"
device.product.id = "0x0c0c"
device.product.name = "Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller"
device.subsystem = "sound"
sysfs.path = "/sys/devices/pci0000:00/0000:00:03.0/sound/card1"
device.vendor.id = "0x8086"
device.vendor.name = "Intel Corporation"
device.string = "1"
Formats:
pcm
Sink #55
State: SUSPENDED
Name: alsa_output.pci-0000_00_03.0.pro-output-10
Description: Audio interne Pro 10
Driver: PipeWire
Sample Specification: s32le 8ch 48000Hz
Channel Map: aux0,aux1,aux2,aux3,aux4,aux5,aux6,aux7
Owner Module: 4294967295
Mute: yes
Volume: aux0: 0 / 0% / -inf dB, aux1: 0 / 0% / -inf dB, aux2: 0 / 0% / -inf dB, aux3: 0 / 0% / -inf dB, aux4: 0 / 0% / -inf dB, aux5: 0 / 0% / -inf dB, aux6: 0 / 0% / -inf dB, aux7: 0 / 0% / -inf dB
balance 0,00
Base Volume: 65536 / 100% / 0,00 dB
Monitor Source: alsa_output.pci-0000_00_03.0.pro-output-10.monitor
Latency: 0 usec, configured 0 usec
Flags: HARDWARE DECIBEL_VOLUME LATENCY
Properties:
alsa.card = "1"
alsa.card_name = "HDA Intel HDMI"
alsa.class = "generic"
alsa.device = "10"
alsa.driver_name = "snd_hda_intel"
alsa.id = "HDMI 4"
alsa.long_card_name = "HDA Intel HDMI at 0xf1610000 irq 42"
alsa.name = "HDMI 4"
alsa.resolution_bits = "32"
alsa.subclass = "generic-mix"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
api.alsa.card.longname = "HDA Intel HDMI at 0xf1610000 irq 42"
api.alsa.card.name = "HDA Intel HDMI"
api.alsa.path = "hw:1,10"
api.alsa.pcm.card = "1"
api.alsa.pcm.stream = "playback"
audio.channels = "8"
audio.position = "AUX0,AUX1,AUX2,AUX3,AUX4,AUX5,AUX6,AUX7"
card.profile.device = "4"
clock.name = "api.alsa.1"
device.api = "alsa"
device.class = "sound"
device.id = "42"
device.profile.description = "Pro 10"
device.profile.name = "pro-output-10"
device.routes = "0"
factory.name = "api.alsa.pcm.sink"
media.class = "Audio/Sink"
device.description = "Audio interne"
node.name = "alsa_output.pci-0000_00_03.0.pro-output-10"
node.nick = "HDMI 4"
node.pause-on-idle = "false"
object.path = "alsa:pcm:1:hw:1,10:playback"
priority.driver = "584"
priority.session = "584"
factory.id = "18"
clock.quantum-limit = "8192"
client.id = "34"
node.driver = "true"
factory.mode = "merge"
audio.adapt.follower = ""
library.name = "audioconvert/libspa-audioconvert"
object.id = "54"
object.serial = "55"
api.acp.auto-port = "false"
api.acp.auto-profile = "false"
api.alsa.card = "1"
api.alsa.use-acp = "true"
api.dbus.ReserveDevice1 = "Audio1"
device.bus = "pci"
device.bus_path = "pci-0000:00:03.0"
device.enum.api = "udev"
device.form_factor = "internal"
device.icon_name = "audio-card-analog-pci"
device.name = "alsa_card.pci-0000_00_03.0"
device.nick = "HDA Intel HDMI"
device.plugged.usec = "11531455"
device.product.id = "0x0c0c"
device.product.name = "Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller"
device.subsystem = "sound"
sysfs.path = "/sys/devices/pci0000:00/0000:00:03.0/sound/card1"
device.vendor.id = "0x8086"
device.vendor.name = "Intel Corporation"
device.string = "1"
Formats:
pcm
Sink #56
State: SUSPENDED
Name: alsa_output.pci-0000_00_1b.0.analog-stereo
Description: Audio interne Stéréo analogique
Driver: PipeWire
Sample Specification: s32le 2ch 48000Hz
Channel Map: front-left,front-right
Owner Module: 4294967295
Mute: no
Volume: front-left: 44582 / 68% / -10,04 dB, front-right: 44582 / 68% / -10,04 dB
balance 0,00
Base Volume: 65536 / 100% / 0,00 dB
Monitor Source: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor
Latency: 0 usec, configured 0 usec
Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Properties:
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.class = "generic"
alsa.device = "0"
alsa.driver_name = "snd_hda_intel"
alsa.id = "CX20751/2 Analog"
alsa.long_card_name = "HDA Intel PCH at 0xf1614000 irq 43"
alsa.name = "CX20751/2 Analog"
alsa.resolution_bits = "16"
alsa.subclass = "generic-mix"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
api.alsa.card.longname = "HDA Intel PCH at 0xf1614000 irq 43"
api.alsa.card.name = "HDA Intel PCH"
api.alsa.path = "front:0"
api.alsa.pcm.card = "0"
api.alsa.pcm.stream = "playback"
audio.channels = "2"
audio.position = "FL,FR"
card.profile.device = "3"
device.api = "alsa"
device.class = "sound"
device.id = "43"
device.profile.description = "Stéréo analogique"
device.profile.name = "analog-stereo"
device.routes = "2"
factory.name = "api.alsa.pcm.sink"
media.class = "Audio/Sink"
device.description = "Audio interne"
node.name = "alsa_output.pci-0000_00_1b.0.analog-stereo"
node.nick = "CX20751/2 Analog"
node.pause-on-idle = "false"
object.path = "alsa:pcm:0:front:0:playback"
priority.driver = "1009"
priority.session = "1009"
factory.id = "18"
clock.quantum-limit = "8192"
client.id = "34"
node.driver = "true"
factory.mode = "merge"
audio.adapt.follower = ""
library.name = "audioconvert/libspa-audioconvert"
object.id = "31"
object.serial = "56"
node.max-latency = "16384/48000"
api.alsa.period-size = "1024"
api.alsa.period-num = "32"
api.alsa.headroom = "0"
api.acp.auto-port = "false"
api.acp.auto-profile = "false"
api.alsa.card = "0"
api.alsa.use-acp = "true"
api.dbus.ReserveDevice1 = "Audio0"
device.bus = "pci"
device.bus_path = "pci-0000:00:1b.0"
device.enum.api = "udev"
device.form_factor = "internal"
device.icon_name = "audio-card-analog-pci"
device.name = "alsa_card.pci-0000_00_1b.0"
device.nick = "HDA Intel PCH"
device.plugged.usec = "11876795"
device.product.id = "0x8c20"
device.product.name = "8 Series/C220 Series Chipset High Definition Audio Controller"
device.subsystem = "sound"
sysfs.path = "/sys/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.vendor.id = "0x8086"
device.vendor.name = "Intel Corporation"
device.string = "0"
Ports:
analog-output-speaker: Haut-parleurs (type: Speaker, priority: 10000, availability group: Legacy 3, availability unknown)
analog-output-headphones: Casque audio (type: Headphones, priority: 9900, availability group: Legacy 4, not available)
Active Port: analog-output-speaker
Formats:
pcm
State: SUSPENDED
Name: alsa_output.pci-0000_00_03.0.pro-output-3
Description: Audio interne Pro
Driver: PipeWire
Sample Specification: s32le 8ch 48000Hz
Channel Map: aux0,aux1,aux2,aux3,aux4,aux5,aux6,aux7
Owner Module: 4294967295
Mute: no
Volume: aux0: 48616 / 74% / -7,78 dB, aux1: 48616 / 74% / -7,78 dB, aux2: 48616 / 74% / -7,78 dB, aux3: 48616 / 74% / -7,78 dB, aux4: 48616 / 74% / -7,78 dB, aux5: 48616 / 74% / -7,78 dB, aux6: 48616 / 74% / -7,78 dB, aux7: 48616 / 74% / -7,78 dB
balance 0,00
Base Volume: 65536 / 100% / 0,00 dB
Monitor Source: alsa_output.pci-0000_00_03.0.pro-output-3.monitor
Latency: 0 usec, configured 0 usec
Flags: HARDWARE DECIBEL_VOLUME LATENCY
Properties:
alsa.card = "1"
alsa.card_name = "HDA Intel HDMI"
alsa.class = "generic"
alsa.device = "3"
alsa.driver_name = "snd_hda_intel"
alsa.id = "HDMI 0"
alsa.long_card_name = "HDA Intel HDMI at 0xf1610000 irq 42"
alsa.name = "HDMI 0"
alsa.resolution_bits = "32"
alsa.subclass = "generic-mix"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
api.alsa.card.longname = "HDA Intel HDMI at 0xf1610000 irq 42"
api.alsa.card.name = "HDA Intel HDMI"
api.alsa.path = "hw:1,3"
api.alsa.pcm.card = "1"
api.alsa.pcm.stream = "playback"
audio.channels = "8"
audio.position = "AUX0,AUX1,AUX2,AUX3,AUX4,AUX5,AUX6,AUX7"
card.profile.device = "0"
clock.name = "api.alsa.1"
device.api = "alsa"
device.class = "sound"
device.id = "42"
device.profile.description = "Pro"
device.profile.name = "pro-output-3"
device.routes = "0"
factory.name = "api.alsa.pcm.sink"
media.class = "Audio/Sink"
device.description = "Audio interne"
node.name = "alsa_output.pci-0000_00_03.0.pro-output-3"
node.nick = "HDMI 0"
node.pause-on-idle = "false"
object.path = "alsa:pcm:1:hw:1,3:playback"
priority.driver = "696"
priority.session = "696"
factory.id = "18"
clock.quantum-limit = "8192"
client.id = "34"
node.driver = "true"
factory.mode = "merge"
audio.adapt.follower = ""
library.name = "audioconvert/libspa-audioconvert"
object.id = "50"
object.serial = "51"
api.acp.auto-port = "false"
api.acp.auto-profile = "false"
api.alsa.card = "1"
api.alsa.use-acp = "true"
api.dbus.ReserveDevice1 = "Audio1"
device.bus = "pci"
device.bus_path = "pci-0000:00:03.0"
device.enum.api = "udev"
device.form_factor = "internal"
device.icon_name = "audio-card-analog-pci"
device.name = "alsa_card.pci-0000_00_03.0"
device.nick = "HDA Intel HDMI"
device.plugged.usec = "11531455"
device.product.id = "0x0c0c"
device.product.name = "Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller"
device.subsystem = "sound"
sysfs.path = "/sys/devices/pci0000:00/0000:00:03.0/sound/card1"
device.vendor.id = "0x8086"
device.vendor.name = "Intel Corporation"
device.string = "1"
Formats:
pcm
Sink #52
State: SUSPENDED
Name: alsa_output.pci-0000_00_03.0.pro-output-7
Description: Audio interne Pro 7
Driver: PipeWire
Sample Specification: s32le 8ch 48000Hz
Channel Map: aux0,aux1,aux2,aux3,aux4,aux5,aux6,aux7
Owner Module: 4294967295
Mute: yes
Volume: aux0: 65536 / 100% / 0,00 dB, aux1: 65536 / 100% / 0,00 dB, aux2: 65536 / 100% / 0,00 dB, aux3: 65536 / 100% / 0,00 dB, aux4: 65536 / 100% / 0,00 dB, aux5: 65536 / 100% / 0,00 dB, aux6: 65536 / 100% / 0,00 dB, aux7: 65536 / 100% / 0,00 dB
balance 0,00
Base Volume: 65536 / 100% / 0,00 dB
Monitor Source: alsa_output.pci-0000_00_03.0.pro-output-7.monitor
Latency: 0 usec, configured 0 usec
Flags: HARDWARE DECIBEL_VOLUME LATENCY
Properties:
alsa.card = "1"
alsa.card_name = "HDA Intel HDMI"
alsa.class = "generic"
alsa.device = "7"
alsa.driver_name = "snd_hda_intel"
alsa.id = "HDMI 1"
alsa.long_card_name = "HDA Intel HDMI at 0xf1610000 irq 42"
alsa.name = "HDMI 1"
alsa.resolution_bits = "32"
alsa.subclass = "generic-mix"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
api.alsa.card.longname = "HDA Intel HDMI at 0xf1610000 irq 42"
api.alsa.card.name = "HDA Intel HDMI"
api.alsa.path = "hw:1,7"
api.alsa.pcm.card = "1"
api.alsa.pcm.stream = "playback"
audio.channels = "8"
audio.position = "AUX0,AUX1,AUX2,AUX3,AUX4,AUX5,AUX6,AUX7"
card.profile.device = "1"
clock.name = "api.alsa.1"
device.api = "alsa"
device.class = "sound"
device.id = "42"
device.profile.description = "Pro 7"
device.profile.name = "pro-output-7"
device.routes = "0"
factory.name = "api.alsa.pcm.sink"
media.class = "Audio/Sink"
device.description = "Audio interne"
node.name = "alsa_output.pci-0000_00_03.0.pro-output-7"
node.nick = "HDMI 1"
node.pause-on-idle = "false"
object.path = "alsa:pcm:1:hw:1,7:playback"
priority.driver = "632"
priority.session = "632"
factory.id = "18"
clock.quantum-limit = "8192"
client.id = "34"
node.driver = "true"
factory.mode = "merge"
audio.adapt.follower = ""
library.name = "audioconvert/libspa-audioconvert"
object.id = "51"
object.serial = "52"
api.acp.auto-port = "false"
api.acp.auto-profile = "false"
api.alsa.card = "1"
api.alsa.use-acp = "true"
api.dbus.ReserveDevice1 = "Audio1"
device.bus = "pci"
device.bus_path = "pci-0000:00:03.0"
device.enum.api = "udev"
device.form_factor = "internal"
device.icon_name = "audio-card-analog-pci"
device.name = "alsa_card.pci-0000_00_03.0"
device.nick = "HDA Intel HDMI"
device.plugged.usec = "11531455"
device.product.id = "0x0c0c"
device.product.name = "Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller"
device.subsystem = "sound"
sysfs.path = "/sys/devices/pci0000:00/0000:00:03.0/sound/card1"
device.vendor.id = "0x8086"
device.vendor.name = "Intel Corporation"
device.string = "1"
Formats:
pcm
Sink #53
State: SUSPENDED
Name: alsa_output.pci-0000_00_03.0.pro-output-8
Description: Audio interne Pro 8
Driver: PipeWire
Sample Specification: s32le 8ch 48000Hz
Channel Map: aux0,aux1,aux2,aux3,aux4,aux5,aux6,aux7
Owner Module: 4294967295
Mute: yes
Volume: aux0: 62188 / 95% / -1,37 dB, aux1: 62188 / 95% / -1,37 dB, aux2: 62188 / 95% / -1,37 dB, aux3: 62188 / 95% / -1,37 dB, aux4: 62188 / 95% / -1,37 dB, aux5: 62188 / 95% / -1,37 dB, aux6: 62188 / 95% / -1,37 dB, aux7: 62188 / 95% / -1,37 dB
balance 0,00
Base Volume: 65536 / 100% / 0,00 dB
Monitor Source: alsa_output.pci-0000_00_03.0.pro-output-8.monitor
Latency: 0 usec, configured 0 usec
Flags: HARDWARE DECIBEL_VOLUME LATENCY
Properties:
alsa.card = "1"
alsa.card_name = "HDA Intel HDMI"
alsa.class = "generic"
alsa.device = "8"
alsa.driver_name = "snd_hda_intel"
alsa.id = "HDMI 2"
alsa.long_card_name = "HDA Intel HDMI at 0xf1610000 irq 42"
alsa.name = "HDMI 2"
alsa.resolution_bits = "32"
alsa.subclass = "generic-mix"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
api.alsa.card.longname = "HDA Intel HDMI at 0xf1610000 irq 42"
api.alsa.card.name = "HDA Intel HDMI"
api.alsa.path = "hw:1,8"
api.alsa.pcm.card = "1"
api.alsa.pcm.stream = "playback"
audio.channels = "8"
audio.position = "AUX0,AUX1,AUX2,AUX3,AUX4,AUX5,AUX6,AUX7"
card.profile.device = "2"
clock.name = "api.alsa.1"
device.api = "alsa"
device.class = "sound"
device.id = "42"
device.profile.description = "Pro 8"
device.profile.name = "pro-output-8"
device.routes = "0"
factory.name = "api.alsa.pcm.sink"
media.class = "Audio/Sink"
device.description = "Audio interne"
node.name = "alsa_output.pci-0000_00_03.0.pro-output-8"
node.nick = "HDMI 2"
node.pause-on-idle = "false"
object.path = "alsa:pcm:1:hw:1,8:playback"
priority.driver = "616"
priority.session = "616"
factory.id = "18"
clock.quantum-limit = "8192"
client.id = "34"
node.driver = "true"
factory.mode = "merge"
audio.adapt.follower = ""
library.name = "audioconvert/libspa-audioconvert"
object.id = "52"
object.serial = "53"
api.acp.auto-port = "false"
api.acp.auto-profile = "false"
api.alsa.card = "1"
api.alsa.use-acp = "true"
api.dbus.ReserveDevice1 = "Audio1"
device.bus = "pci"
device.bus_path = "pci-0000:00:03.0"
device.enum.api = "udev"
device.form_factor = "internal"
device.icon_name = "audio-card-analog-pci"
device.name = "alsa_card.pci-0000_00_03.0"
device.nick = "HDA Intel HDMI"
device.plugged.usec = "11531455"
device.product.id = "0x0c0c"
device.product.name = "Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller"
device.subsystem = "sound"
sysfs.path = "/sys/devices/pci0000:00/0000:00:03.0/sound/card1"
device.vendor.id = "0x8086"
device.vendor.name = "Intel Corporation"
device.string = "1"
Formats:
pcm
Sink #54
State: SUSPENDED
Name: alsa_output.pci-0000_00_03.0.pro-output-9
Description: Audio interne Pro 9
Driver: PipeWire
Sample Specification: s32le 8ch 48000Hz
Channel Map: aux0,aux1,aux2,aux3,aux4,aux5,aux6,aux7
Owner Module: 4294967295
Mute: yes
Volume: aux0: 65936 / 101% / 0,16 dB, aux1: 65936 / 101% / 0,16 dB, aux2: 65936 / 101% / 0,16 dB, aux3: 65936 / 101% / 0,16 dB, aux4: 65936 / 101% / 0,16 dB, aux5: 65936 / 101% / 0,16 dB, aux6: 65936 / 101% / 0,16 dB, aux7: 65936 / 101% / 0,16 dB
balance 0,00
Base Volume: 65536 / 100% / 0,00 dB
Monitor Source: alsa_output.pci-0000_00_03.0.pro-output-9.monitor
Latency: 0 usec, configured 0 usec
Flags: HARDWARE DECIBEL_VOLUME LATENCY
Properties:
alsa.card = "1"
alsa.card_name = "HDA Intel HDMI"
alsa.class = "generic"
alsa.device = "9"
alsa.driver_name = "snd_hda_intel"
alsa.id = "HDMI 3"
alsa.long_card_name = "HDA Intel HDMI at 0xf1610000 irq 42"
alsa.name = "HDMI 3"
alsa.resolution_bits = "32"
alsa.subclass = "generic-mix"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
api.alsa.card.longname = "HDA Intel HDMI at 0xf1610000 irq 42"
api.alsa.card.name = "HDA Intel HDMI"
api.alsa.path = "hw:1,9"
api.alsa.pcm.card = "1"
api.alsa.pcm.stream = "playback"
audio.channels = "8"
audio.position = "AUX0,AUX1,AUX2,AUX3,AUX4,AUX5,AUX6,AUX7"
card.profile.device = "3"
clock.name = "api.alsa.1"
device.api = "alsa"
device.class = "sound"
device.id = "42"
device.profile.description = "Pro 9"
device.profile.name = "pro-output-9"
device.routes = "0"
factory.name = "api.alsa.pcm.sink"
media.class = "Audio/Sink"
device.description = "Audio interne"
node.name = "alsa_output.pci-0000_00_03.0.pro-output-9"
node.nick = "HDMI 3"
node.pause-on-idle = "false"
object.path = "alsa:pcm:1:hw:1,9:playback"
priority.driver = "600"
priority.session = "600"
factory.id = "18"
clock.quantum-limit = "8192"
client.id = "34"
node.driver = "true"
factory.mode = "merge"
audio.adapt.follower = ""
library.name = "audioconvert/libspa-audioconvert"
object.id = "53"
object.serial = "54"
api.acp.auto-port = "false"
api.acp.auto-profile = "false"
api.alsa.card = "1"
api.alsa.use-acp = "true"
api.dbus.ReserveDevice1 = "Audio1"
device.bus = "pci"
device.bus_path = "pci-0000:00:03.0"
device.enum.api = "udev"
device.form_factor = "internal"
device.icon_name = "audio-card-analog-pci"
device.name = "alsa_card.pci-0000_00_03.0"
device.nick = "HDA Intel HDMI"
device.plugged.usec = "11531455"
device.product.id = "0x0c0c"
device.product.name = "Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller"
device.subsystem = "sound"
sysfs.path = "/sys/devices/pci0000:00/0000:00:03.0/sound/card1"
device.vendor.id = "0x8086"
device.vendor.name = "Intel Corporation"
device.string = "1"
Formats:
pcm
Sink #55
State: SUSPENDED
Name: alsa_output.pci-0000_00_03.0.pro-output-10
Description: Audio interne Pro 10
Driver: PipeWire
Sample Specification: s32le 8ch 48000Hz
Channel Map: aux0,aux1,aux2,aux3,aux4,aux5,aux6,aux7
Owner Module: 4294967295
Mute: yes
Volume: aux0: 0 / 0% / -inf dB, aux1: 0 / 0% / -inf dB, aux2: 0 / 0% / -inf dB, aux3: 0 / 0% / -inf dB, aux4: 0 / 0% / -inf dB, aux5: 0 / 0% / -inf dB, aux6: 0 / 0% / -inf dB, aux7: 0 / 0% / -inf dB
balance 0,00
Base Volume: 65536 / 100% / 0,00 dB
Monitor Source: alsa_output.pci-0000_00_03.0.pro-output-10.monitor
Latency: 0 usec, configured 0 usec
Flags: HARDWARE DECIBEL_VOLUME LATENCY
Properties:
alsa.card = "1"
alsa.card_name = "HDA Intel HDMI"
alsa.class = "generic"
alsa.device = "10"
alsa.driver_name = "snd_hda_intel"
alsa.id = "HDMI 4"
alsa.long_card_name = "HDA Intel HDMI at 0xf1610000 irq 42"
alsa.name = "HDMI 4"
alsa.resolution_bits = "32"
alsa.subclass = "generic-mix"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
api.alsa.card.longname = "HDA Intel HDMI at 0xf1610000 irq 42"
api.alsa.card.name = "HDA Intel HDMI"
api.alsa.path = "hw:1,10"
api.alsa.pcm.card = "1"
api.alsa.pcm.stream = "playback"
audio.channels = "8"
audio.position = "AUX0,AUX1,AUX2,AUX3,AUX4,AUX5,AUX6,AUX7"
card.profile.device = "4"
clock.name = "api.alsa.1"
device.api = "alsa"
device.class = "sound"
device.id = "42"
device.profile.description = "Pro 10"
device.profile.name = "pro-output-10"
device.routes = "0"
factory.name = "api.alsa.pcm.sink"
media.class = "Audio/Sink"
device.description = "Audio interne"
node.name = "alsa_output.pci-0000_00_03.0.pro-output-10"
node.nick = "HDMI 4"
node.pause-on-idle = "false"
object.path = "alsa:pcm:1:hw:1,10:playback"
priority.driver = "584"
priority.session = "584"
factory.id = "18"
clock.quantum-limit = "8192"
client.id = "34"
node.driver = "true"
factory.mode = "merge"
audio.adapt.follower = ""
library.name = "audioconvert/libspa-audioconvert"
object.id = "54"
object.serial = "55"
api.acp.auto-port = "false"
api.acp.auto-profile = "false"
api.alsa.card = "1"
api.alsa.use-acp = "true"
api.dbus.ReserveDevice1 = "Audio1"
device.bus = "pci"
device.bus_path = "pci-0000:00:03.0"
device.enum.api = "udev"
device.form_factor = "internal"
device.icon_name = "audio-card-analog-pci"
device.name = "alsa_card.pci-0000_00_03.0"
device.nick = "HDA Intel HDMI"
device.plugged.usec = "11531455"
device.product.id = "0x0c0c"
device.product.name = "Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller"
device.subsystem = "sound"
sysfs.path = "/sys/devices/pci0000:00/0000:00:03.0/sound/card1"
device.vendor.id = "0x8086"
device.vendor.name = "Intel Corporation"
device.string = "1"
Formats:
pcm
Sink #56
State: SUSPENDED
Name: alsa_output.pci-0000_00_1b.0.analog-stereo
Description: Audio interne Stéréo analogique
Driver: PipeWire
Sample Specification: s32le 2ch 48000Hz
Channel Map: front-left,front-right
Owner Module: 4294967295
Mute: no
Volume: front-left: 44582 / 68% / -10,04 dB, front-right: 44582 / 68% / -10,04 dB
balance 0,00
Base Volume: 65536 / 100% / 0,00 dB
Monitor Source: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor
Latency: 0 usec, configured 0 usec
Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Properties:
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.class = "generic"
alsa.device = "0"
alsa.driver_name = "snd_hda_intel"
alsa.id = "CX20751/2 Analog"
alsa.long_card_name = "HDA Intel PCH at 0xf1614000 irq 43"
alsa.name = "CX20751/2 Analog"
alsa.resolution_bits = "16"
alsa.subclass = "generic-mix"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
api.alsa.card.longname = "HDA Intel PCH at 0xf1614000 irq 43"
api.alsa.card.name = "HDA Intel PCH"
api.alsa.path = "front:0"
api.alsa.pcm.card = "0"
api.alsa.pcm.stream = "playback"
audio.channels = "2"
audio.position = "FL,FR"
card.profile.device = "3"
device.api = "alsa"
device.class = "sound"
device.id = "43"
device.profile.description = "Stéréo analogique"
device.profile.name = "analog-stereo"
device.routes = "2"
factory.name = "api.alsa.pcm.sink"
media.class = "Audio/Sink"
device.description = "Audio interne"
node.name = "alsa_output.pci-0000_00_1b.0.analog-stereo"
node.nick = "CX20751/2 Analog"
node.pause-on-idle = "false"
object.path = "alsa:pcm:0:front:0:playback"
priority.driver = "1009"
priority.session = "1009"
factory.id = "18"
clock.quantum-limit = "8192"
client.id = "34"
node.driver = "true"
factory.mode = "merge"
audio.adapt.follower = ""
library.name = "audioconvert/libspa-audioconvert"
object.id = "31"
object.serial = "56"
node.max-latency = "16384/48000"
api.alsa.period-size = "1024"
api.alsa.period-num = "32"
api.alsa.headroom = "0"
api.acp.auto-port = "false"
api.acp.auto-profile = "false"
api.alsa.card = "0"
api.alsa.use-acp = "true"
api.dbus.ReserveDevice1 = "Audio0"
device.bus = "pci"
device.bus_path = "pci-0000:00:1b.0"
device.enum.api = "udev"
device.form_factor = "internal"
device.icon_name = "audio-card-analog-pci"
device.name = "alsa_card.pci-0000_00_1b.0"
device.nick = "HDA Intel PCH"
device.plugged.usec = "11876795"
device.product.id = "0x8c20"
device.product.name = "8 Series/C220 Series Chipset High Definition Audio Controller"
device.subsystem = "sound"
sysfs.path = "/sys/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.vendor.id = "0x8086"
device.vendor.name = "Intel Corporation"
device.string = "0"
Ports:
analog-output-speaker: Haut-parleurs (type: Speaker, priority: 10000, availability group: Legacy 3, availability unknown)
analog-output-headphones: Casque audio (type: Headphones, priority: 9900, availability group: Legacy 4, not available)
Active Port: analog-output-speaker
Formats:
pcm
#16 Re : Matériel » Codec SBC-XQ » 17-10-2022 13:29:46
Toutes mes excuses pour ne t'avoir répondu plus tôt.
● bluetooth.service - Bluetooth service
Loaded: loaded (/lib/systemd/system/bluetooth.service; enabled; preset: enabled)
Drop-In: /etc/systemd/system/bluetooth.service.d
└─override.conf
Active: active (running) since Mon 2022-10-17 13:15:00 CEST; 9min ago
Docs: man:bluetoothd(8)
Main PID: 556 (bluetoothd)
Status: "Running"
Tasks: 1 (limit: 9122)
Memory: 3.8M
CPU: 129ms
CGroup: /system.slice/bluetooth.service
└─556 /usr/libexec/bluetooth/bluetoothd --noplugin=sap
oct. 17 13:15:44 debian bluetoothd[556]: Endpoint registered: sender=:1.64 path=/MediaEndpoint/A2DPSource/opus_05_51
oct. 17 13:15:44 debian bluetoothd[556]: Endpoint registered: sender=:1.64 path=/MediaEndpoint/A2DPSource/opus_05_71
oct. 17 13:15:44 debian bluetoothd[556]: Endpoint registered: sender=:1.64 path=/MediaEndpoint/A2DPSink/opus_05_duplex
oct. 17 13:15:44 debian bluetoothd[556]: Endpoint registered: sender=:1.64 path=/MediaEndpoint/A2DPSource/opus_05_duplex
oct. 17 13:15:44 debian bluetoothd[556]: Endpoint registered: sender=:1.64 path=/MediaEndpoint/A2DPSource/opus_05_pro
oct. 17 13:15:51 debian bluetoothd[556]: src/profile.c:record_cb() Unable to get Headset Voice gateway SDP record: Host is down
oct. 17 13:15:56 debian bluetoothd[556]: profiles/audio/avdtp.c:avdtp_connect_cb() connect to 34:15:9E:90:07:AD: Host is down (112)
oct. 17 13:16:01 debian bluetoothd[556]: profiles/audio/avdtp.c:avdtp_connect_cb() connect to F8:34:41:A5:10:80: Host is down (112)
oct. 17 13:16:01 debian bluetoothd[556]: src/profile.c:record_cb() Unable to get Hands-Free Voice gateway SDP record: Device or resource busy
oct. 17 13:16:06 debian bluetoothd[556]: src/profile.c:record_cb() Unable to get Hands-Free Voice gateway SDP record: Host is down
anonyme a écrit :
Bonjour
cette commande renvoie quelque chose
systemctl status bluetooth
si je me suis pas trompé tu a la liste des codecs initialisés en fin du retour
sur debian certain codec demande un firmware (et peu être non libre)
ps: pas de bluetooth sous la main peu pas vérifier la commande (bluetooth ou bluetoothd)
Voilà ce donne la commande indiquée :
● bluetooth.service - Bluetooth service
Loaded: loaded (/lib/systemd/system/bluetooth.service; enabled; preset: enabled)
Drop-In: /etc/systemd/system/bluetooth.service.d
└─override.conf
Active: active (running) since Mon 2022-10-17 13:15:00 CEST; 9min ago
Docs: man:bluetoothd(8)
Main PID: 556 (bluetoothd)
Status: "Running"
Tasks: 1 (limit: 9122)
Memory: 3.8M
CPU: 129ms
CGroup: /system.slice/bluetooth.service
└─556 /usr/libexec/bluetooth/bluetoothd --noplugin=sap
oct. 17 13:15:44 debian bluetoothd[556]: Endpoint registered: sender=:1.64 path=/MediaEndpoint/A2DPSource/opus_05_51
oct. 17 13:15:44 debian bluetoothd[556]: Endpoint registered: sender=:1.64 path=/MediaEndpoint/A2DPSource/opus_05_71
oct. 17 13:15:44 debian bluetoothd[556]: Endpoint registered: sender=:1.64 path=/MediaEndpoint/A2DPSink/opus_05_duplex
oct. 17 13:15:44 debian bluetoothd[556]: Endpoint registered: sender=:1.64 path=/MediaEndpoint/A2DPSource/opus_05_duplex
oct. 17 13:15:44 debian bluetoothd[556]: Endpoint registered: sender=:1.64 path=/MediaEndpoint/A2DPSource/opus_05_pro
oct. 17 13:15:51 debian bluetoothd[556]: src/profile.c:record_cb() Unable to get Headset Voice gateway SDP record: Host is down
oct. 17 13:15:56 debian bluetoothd[556]: profiles/audio/avdtp.c:avdtp_connect_cb() connect to 34:15:9E:90:07:AD: Host is down (112)
oct. 17 13:16:01 debian bluetoothd[556]: profiles/audio/avdtp.c:avdtp_connect_cb() connect to F8:34:41:A5:10:80: Host is down (112)
oct. 17 13:16:01 debian bluetoothd[556]: src/profile.c:record_cb() Unable to get Hands-Free Voice gateway SDP record: Device or resource busy
oct. 17 13:16:06 debian bluetoothd[556]: src/profile.c:record_cb() Unable to get Hands-Free Voice gateway SDP record: Host is down
À noter que les dernières lignes ( à partir de la sixième) sont en rouge. Cela s'explique probablement par le fait que j'ai volontairement renoncé aux profils HSP-HFP (sortie en mono), qui s'imposaient à chaque fois quand j'utilisais mon casque en BT, au lieu d'A2DP.
#17 Re : Matériel » Codec SBC-XQ » 11-10-2022 15:47:54
Merci @Croutons, pour ces nouveaux conseils. Entre temps, j'ai supprimé PulseEffects : EasyEffects le rempalce depuis un moment, apparemment.
#18 Re : Matériel » Sortie son en mono uniquement : The Retour I… [RÉSOLU] » 11-10-2022 15:44:30
11 octobre : encore une modification, puisque le casque (bien que connecté en bluetooth) ne permettait pas d'avoir de son… J'ai commenté la ligne suivante pour que A2DP soit le seul profil admis. Évidemment, attention aux appareils utilisant d'autres profils…
nano /etc/bluetooth/main.conf
# Multiprofile = multiple
# Multiprofile = multiple
Un petit coup de
systemctl restart bluetooth
Et le casque apparaît bien dans les paramètres de sortie son.
Vous avais-je dit que j'avais supprimé pulseaudio ? Ben si…
#19 Re : Matériel » Codec SBC-XQ » 07-10-2022 14:46:38
Je vais me contenter de PulseEffects, et d'abord mieux m'informer sur ses possibilités : ce sera un bon début avant de faire n'importe quoi
#20 Re : Matériel » Codec SBC-XQ » 07-10-2022 14:06:41
Merci pour ta réponse, Croutons.
l'article que tu cites est de 2019, l'information application d'un patch est dépassé
Oui, bien sûr. Peut-être a-t-il été intégré à Pulse (ou autre) ? Je n'ai rien trouvé sur ce point, à part les échanges sur le forum de Pulse.
qu'est ce qui te fait penser que le son peut être meilleur?
Je me fie seulement à ce que dit l'article, avec ce flux en double canal sur quoi j'ignore absolument tout. Ça ne correspond quand même pas à la sortie audio en stéréo, puisque le codec SBC-XQ associé au profil A2DP fait déjà ce boulot ?
la qualité dépend pour beaucoup de ta source, moins du casque
Oui, tout à fait d'accord. : j'avais oublié de mentionner la source. Mais c'est ce pourquoi j'étais intervenu sur cela, en bricolant avec les options de PulseEffects.
Je ne connais pas grand chose en matière audio (noooon ?…) : j'y vais vraiment à tâtons. Si tu veux intervenir sur les graves et les aigus, sur un ordinateur équipé d'une Debian, tu ferais quoi ?
#21 Re : Matériel » Codec SBC-XQ » 07-10-2022 11:12:36
Rhôôôôôh…Ne me dites pas que c'est un petit codec comme ça qui vous rend timide, non ? Ben alors, les gars (et gares) ?…
#22 Matériel » Codec SBC-XQ » 06-10-2022 15:17:10
- fred02840
- Réponses : 13
Mon casque bluetooth fonctionne maintenant sans problème : le profil a2dp (codec SBC-XQ) est reconnu d'emblée. Mais, évidemment, je voudrais améliorer la qualité du son. J'ai tenté d'utiliser un outil comme PulseEffects, mais les améliorations sont peu probantes. On pourra me rétorquer que cela dépend de la qualité du dit casque (un Zihnic, mod. WH-816) : hop, c'est fait.
Il semblerait toutefois que cette amélioration soit possible : si. C'est l'article de la Wkipedia qui le prétend, ne faisant d'ailleurs que reprendre ce qui est écrit (mais en anglais) dans un article de Sound Expert (pas moyen d'ouvrir l'article originel). Voici un extrait prometteur :
Il semblerait toutefois que cette amélioration soit possible : si. C'est l'article de la Wkipedia qui le prétend, ne faisant d'ailleurs que reprendre ce qui est écrit (mais en anglais) dans un article de Sound Expert (pas moyen d'ouvrir l'article originel). Voici un extrait prometteur :
SBC XQ
Le SBC XQ n'est pas une évolution mais plutôt une augmentation de la fréquence de transfert de données du CODEC (bitrate) au-delà de la limite historique de 328 kbit/s imposée par les premières versions de Bluetooth, tout en restant en dessous du maximal théorique de 1500 kbit/s prévu par les spécifications de SBC. De fait, la version XQ du CODEC peut atteindre un débit théorique de 617 kbit/s sur Bluetooth V4.
L'utilisation d'un flux en double canal est nécessaire pour atteindre une qualité de rendu audio supérieur 1au codec aptXHD.
Les débits maximum d’émission sous Android son réglés à 551.2 kbit/s pour du 44.1 /16 bits , et à 600.0 kbit/s pour du 48 /16 bits.
Support
support audio SBC XQ
Menu d'activation du support audio SBC XQ avec un périphérique multimédia compatible (HUAWEI CM510) dans un terminal Android (AOSP - lineageOS 16)
Android (AOSP) 8.0+ sous lineageOS supportent cette évolution2 (sans l'ajout de patch)
GNU/Linux nécessite l'application d'un patch sur le système de son Pulseaudio
Quel est ce patch ? Il aurait été concçu par Pali Rohar.
Mais j'ai quelques interrogations à vous soumettre, car j'avoue n'y piger que couic (ou guère mieux…) :
Qu'est-ce que c'est que cette histoire de « flux en double canal […] nécessaire pour atteindre une qualité de rendu audio supérieur au codec aptXHD » ?
Où récupérer le patch de l'ami Rohar ?
Est-il bien raisonnable de l'installer ?
Merci d'avance pour vos lumières
#23 Re : Matériel » Sortie son en mono uniquement : The Retour I… [RÉSOLU] » 06-10-2022 15:01:11
6 octobre. Le casque est reconnu tout de suite. Et il est identifié automatiquement (plus besoin de relancer le service bluetooth) en tant que tel dans les paramètres audio : A2DP a donc triomphé.
#24 Re : Matériel » Sortie son en mono uniquement : The Retour I… [RÉSOLU] » 02-10-2022 19:11:10
Dernière intervention, je l'espère. Tout est revenu, bluetooth.
Petite astuce au passage. Quand je demande la reconnaissance de mon casque via les paramètres bluetooth de Gnome, et je cherche à voir sous quelle configuration le son se présente, je tombe sur « Main-libre », donc une sortie audio en mono (profil HSF-HSP). Si on veut activer le profil A2DP, il faut en passer par le Terminal et relancer le service bluetooth. Pourquoi ? Je l'ignore, mais ça fonctionne…
Petite astuce au passage. Quand je demande la reconnaissance de mon casque via les paramètres bluetooth de Gnome, et je cherche à voir sous quelle configuration le son se présente, je tombe sur « Main-libre », donc une sortie audio en mono (profil HSF-HSP). Si on veut activer le profil A2DP, il faut en passer par le Terminal et relancer le service bluetooth. Pourquoi ? Je l'ignore, mais ça fonctionne…
systemctl restart bluetooth
Allez, je recolle un RÉSOLU dans le titre, et ça ira bien comme ça.
#25 Re : Matériel » Sortie son en mono uniquement : The Retour I… [RÉSOLU] » 29-09-2022 18:12:39
Eh bé non : plus de son du tout, plus de bluetooth…
Je vais avancer l'heure de me coucher, moi…
Je vais avancer l'heure de me coucher, moi…