logo Debian Debian Debian-France Debian-Facile Debian-fr.org Forum-Debian.fr Debian ? Communautés logo inclusivité

Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#1 Re : Vos préférences » Dillo par TOR ! (pas par Thor, hein) » 15-05-2018 18:12:54

Debion
Je n'ai pas de réponse à ta question otyugh.

#2 Re : Vos préférences » Dillo par TOR ! (pas par Thor, hein) » 14-05-2018 17:03:05

Debion
Bonsoir,

On peut aussi installer Tor sur un Raspberry Pi en le transformant en point d'accès en utilisant Raspbian. (Cette idée vient du magazine Raspberry Inside n°5)

Autre solution pour ceux qui veulent l'utiliser tout de suite, on peut utiliser l'extension sur Firefox et Chrome.

Pour ceux que ça intéresse. N'hésitez pas à demander plus d'infos !

Merci d'avance !

#3 Re : Système » Code Erreur Boot » 06-05-2018 08:39:47

Debion
Ok, je vais continuer à chercher les autres.

Merci.

#4 Système » Code Erreur Boot » 05-05-2018 18:48:07

Debion
Réponses : 2
Bonjour,

Petit problème pendant le boot de mon ordi. Je vais vous expliquer.

Quand j'allume mon ordi en appuyant sur le bouton on, le logo Asus s'affiche, le Grub s'affiche, je choisis Debian et s'affiche plusieurs codes d'erreurs.


[     1.366226] usb 1-6 string descriptor 0 read error: -22
/dev/sda1: clean, 8106/3055616 files, 346153/4882432 blocks
/dev/sda4: clean, 145600/1222992 files, 1146184/4882432 blocks
[     8.376174] usb 1-6: firmware: failed to load ar3k/AthrBT_0x11020000.dfu (-2)
[     8.376178] Bluetooth: Loading patch file failed
[     9.391046] nouveau 0000:04:00.0: priv: HUBO: 10ecc0 ffffffff (1e40822c)
[     10.691654] nouveau 0000:04:00.0: DRM: Pointer to TMDS table invalid
[     10.691686] nouveau 0000:04:00.0 DRM: Pointer to flat panel table invalib
 


Puis mon ordi se lance, j'entre mon code et c'est bon.

Tout fonctionne mais j'aimerai soit régler ses problèmes ou les camoufler d'une façon.

Merci d'avance !

#5 Re : Matériel » Ajout Barrette RAM » 05-05-2018 15:42:13

Debion
8 Go de RAM seront suffisants pour mon utilisation. Merci de tous vos conseils !

#6 Re : Matériel » Ajout Barrette RAM » 05-05-2018 15:40:02

Debion
Bonjour, je viens d'acheter une autre barrette de 4Go de la marque Crucial.

Merci de votre aide !

Le lien de mon achat : http://www.crucial.fr/fra/fr/ct51264bf160bj

Au final, j'aurai 2 x 4 Go de RAM et mes 2 slots de RAM occupé.

#7 Re : Matériel » Ajout Barrette RAM » 05-05-2018 12:52:58

Debion
En faites, c'est juste pour que mon PC soit un peu plus rapide, et pouvoir être plus performant.

Après si il devient plus lent avec une autre barrette, je ne change rien.

#8 Re : Matériel » Ajout Barrette RAM » 05-05-2018 09:31:26

Debion
Donc je vais acheter une barrette de 8 Go en plus de celle de 4 Go.

J'aurai 12 Go de RAM qui n'est pas mal.

Merci beaucoup !

#9 Re : Matériel » Ajout Barrette RAM » 05-05-2018 08:41:44

Debion
Petite question en plus :

Peut-on utiliser 2 barrettes de RAM qui n'ont pas la même capacité ? Une 4 Go avec une 8 Go.

Merci d'avance !

#11 Re : Matériel » Ajout Barrette RAM » 04-05-2018 18:47:41

Debion
Mon Ordi me sert à une utilisation quotidienne, internet, mail, mais aussi à la programmation et à la conception graphique.

J'ai 2 slots : un déjà occupé par la RAM d'origine 4 Go et un autre libre où j'aimerai en rajouter une de 8 Go.

Ok donc celle-là devrait bien fonctionnait ?!

https://www.ldlc.com/fiche/PB00152032.html

Merci d'avance !

#12 Re : Matériel » Ajout Barrette RAM » 04-05-2018 11:35:57

Debion
J'en ai regardé plusieurs mais je ne sais pas niveau compatibilité.

Pouvez-vous m'aiguiller sur la compatibilité, type de RAM ?

https://www.ldlc.com/fiche/PB00193174.html

https://www.ldlc.com/fiche/PB00137791.html

https://www.ldlc.com/fiche/PB00153731.html

https://www.ldlc.com/fiche/PB00152032.html

Est-ce qu'une d'elles sont compatibles ?!

Merci d'avance !

#13 Re : Matériel » Ajout Barrette RAM » 02-05-2018 20:15:54

Debion
Retour de la commmande :

 dmidecode -t memory



 # dmidecode 3.0
Getting SMBIOS data from sysfs.
SMBIOS 2.8 present.

Handle 0x0013, DMI type 16, 23 bytes
Physical Memory Array
  Location: System Board Or Motherboard
  Use: System Memory
  Error Correction Type: None
  Maximum Capacity: 16 GB
  Error Information Handle: Not Provided
  Number Of Devices: 2

Handle 0x0014, DMI type 17, 34 bytes
Memory Device
  Array Handle: 0x0013
  Error Information Handle: Not Provided
  Total Width: Unknown
  Data Width: Unknown
  Size: No Module Installed
  Form Factor: DIMM
  Set: None
  Locator: ChannelA-DIMM0
  Bank Locator: BANK 0
  Type: Unknown
  Type Detail: None
  Speed: Unknown
  Manufacturer: Not Specified
  Serial Number: Not Specified
  Asset Tag: Not Specified
  Part Number: Not Specified
  Rank: Unknown
  Configured Clock Speed: Unknown

Handle 0x0015, DMI type 17, 34 bytes
Memory Device
  Array Handle: 0x0013
  Error Information Handle: Not Provided
  Total Width: 64 bits
  Data Width: 64 bits
  Size: 4096 MB
  Form Factor: SODIMM
  Set: None
  Locator: ChannelB-DIMM0
  Bank Locator: BANK 2
  Type: DDR3
  Type Detail: Synchronous
  Speed: 1600 MHz
  Manufacturer: Samsung
  Serial Number: 00000000
  Asset Tag: 9876543210
  Part Number: M471B5173EB0-YK0  
  Rank: 1
  Configured Clock Speed: 1600 MHz



C'est bien un Asus K501LX-DM200T.

Merci !

#14 Matériel » Ajout Barrette RAM » 01-05-2018 17:36:12

Debion
Réponses : 30
Bonsoir,

J'aimerai augmenter la mémoire vive de mon ordinateur qui est de pour l'instant 4 Go.

Avec une autre barrette de 4 Go.

Pour l'instant, je regarde mais j'aimerai me renseigner.

Est ce que si on rajoute une barrette de RAM, il faut ré-installer Debian, faire autre chose ou ne rien faire ?

Merci d'avance !

#15 Re : Matériel » Problème Pad PC Portable [Résolu] » 01-05-2018 09:09:17

Debion
Problème résolu ! J'ai installé le dernier Debian 9.4.0 au lieu de Debian 8.10 . Maintenant mon Pad fonctionne. J'en ai profité pour re-partitionner mes disques !

Pour les doublons du fichier sources.list , je le savais mais j'avais pas pris le temps.

Merci beaucoup !

#16 Re : Matériel » Problème Pad PC Portable [Résolu] » 28-04-2018 18:38:48

Debion
Bonsoir !

Réponse à

 apt-cache policy xserver-xorg-input-synaptics



 xserver-xorg-input-synaptics:
  Installé : 1.8.1-1
  Candidat : 1.8.1-1
 Table de version :
 *** 1.8.1-1 0
        500 http://httpredir.debian.org/debian/ jessie/main amd64 Packages
        500 http://ftp.fr.debian.org/debian/ jessie/main amd64 Packages
        100 /var/lib/dpkg/status



-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Réponse à

 cat /var/log/Xorg.0.log




[    19.485]
X.Org X Server 1.16.4
Release Date: 2014-12-20
[    19.485] X Protocol Version 11, Revision 0
[    19.485] Build Operating System: Linux 4.9.0-4-amd64 x86_64 Debian
[    19.486] Current Operating System: Linux Artos 3.16.0-5-amd64 #1 SMP Debian 3.16.51-3+deb8u1 (2018-01-08) x86_64
[    19.486] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-5-amd64 root=UUID=f496c32f-a49f-4f8c-b8bd-b9245741b3ab ro quiet
[    19.486] Build Date: 14 October 2017  10:41:31AM
[    19.486] xorg-server 2:1.16.4-1+deb8u2 (http://www.debian.org/support)
[    19.486] Current version of pixman: 0.32.6
[    19.486]  Before reporting problems, check http://wiki.x.org
  to make sure that you have the latest version.
[    19.486] Markers: (--) probed, (**) from config file, (==) default setting,
  (++) from command line, (!!) notice, (II) informational,
  (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    19.486] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Apr 28 19:25:34 2018
[    19.607] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    19.721] (==) No Layout section.  Using the first Screen section.
[    19.721] (==) No screen section available. Using defaults.
[    19.721] (**) |-->Screen "Default Screen Section" (0)
[    19.721] (**) |   |-->Monitor "<default monitor>"
[    19.739] (==) No monitor specified for screen "Default Screen Section".
  Using a default monitor configuration.
[    19.739] (==) Automatically adding devices
[    19.739] (==) Automatically enabling devices
[    19.739] (==) Automatically adding GPU devices
[    20.131] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    20.131]  Entry deleted from font path.
[    20.411] (==) FontPath set to:
  /usr/share/fonts/X11/misc,
  /usr/share/fonts/X11/100dpi/:unscaled,
  /usr/share/fonts/X11/75dpi/:unscaled,
  /usr/share/fonts/X11/Type1,
  /usr/share/fonts/X11/100dpi,
  /usr/share/fonts/X11/75dpi,
  built-ins
[    20.411] (==) ModulePath set to "/usr/lib/xorg/modules"
[    20.411] (II) The server relies on udev to provide the list of input devices.
  If no devices become available, reconfigure udev or disable AutoAddDevices.
[    20.457] (II) Loader magic: 0x55b391c75d80
[    20.457] (II) Module ABI versions:
[    20.457]  X.Org ANSI C Emulation: 0.4
[    20.457]  X.Org Video Driver: 18.0
[    20.457]  X.Org XInput driver : 21.0
[    20.457]  X.Org Server Extension : 8.0
[    20.457] (II) xfree86: Adding drm device (/dev/dri/card0)
[    20.458] (--) PCI:*(0:0:2:0) 8086:1616:1043:1acd rev 9, Mem @ 0xa1000000/16777216, 0xb0000000/268435456, I/O @ 0x00005000/64
[    20.458] (--) PCI: (0:4:0:0) 10de:139a:1043:1acd rev 162, Mem @ 0xa2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00003000/128, BIOS @ 0x????????/524288
[    20.459] (II) LoadModule: "glx"
[    20.602] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    20.919] (II) Module glx: vendor="X.Org Foundation"
[    20.919]  compiled for 1.16.4, module version = 1.0.0
[    20.919]  ABI class: X.Org Server Extension, version 8.0
[    20.919] (==) AIGLX enabled
[    20.919] (==) Matched intel as autoconfigured driver 0
[    20.919] (==) Matched intel as autoconfigured driver 1
[    20.919] (==) Matched modesetting as autoconfigured driver 2
[    20.919] (==) Matched fbdev as autoconfigured driver 3
[    20.919] (==) Matched vesa as autoconfigured driver 4
[    20.920] (==) Assigned the driver to the xf86ConfigLayout
[    20.920] (II) LoadModule: "intel"
[    20.920] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    20.972] (II) Module intel: vendor="X.Org Foundation"
[    20.972]  compiled for 1.15.99.904, module version = 2.21.15
[    20.972]  Module class: X.Org Video Driver
[    20.972]  ABI class: X.Org Video Driver, version 18.0
[    20.972] (II) LoadModule: "modesetting"
[    20.973] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    20.992] (II) Module modesetting: vendor="X.Org Foundation"
[    20.992]  compiled for 1.16.4, module version = 0.9.0
[    20.992]  Module class: X.Org Video Driver
[    20.992]  ABI class: X.Org Video Driver, version 18.0
[    20.992] (II) LoadModule: "fbdev"
[    20.992] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    21.002] (II) Module fbdev: vendor="X.Org Foundation"
[    21.002]  compiled for 1.15.99.904, module version = 0.4.4
[    21.002]  Module class: X.Org Video Driver
[    21.002]  ABI class: X.Org Video Driver, version 18.0
[    21.002] (II) LoadModule: "vesa"
[    21.002] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    21.011] (II) Module vesa: vendor="X.Org Foundation"
[    21.011]  compiled for 1.15.99.904, module version = 2.3.3
[    21.011]  Module class: X.Org Video Driver
[    21.011]  ABI class: X.Org Video Driver, version 18.0
[    21.011] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
  i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
  915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
  Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
  GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
  HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
  HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
  HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
  HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
[    21.027] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    21.027] (II) FBDEV: driver for framebuffer: fbdev
[    21.027] (II) VESA: driver for VESA chipsets: vesa
[    21.027] (++) using VT number 7

[    21.032] (WW) Falling back to old probe method for modesetting
[    21.032] (WW) Falling back to old probe method for fbdev
[    21.032] (II) Loading sub module "fbdevhw"
[    21.032] (II) LoadModule: "fbdevhw"
[    21.033] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    21.289] (II) Module fbdevhw: vendor="X.Org Foundation"
[    21.289]  compiled for 1.16.4, module version = 0.0.2
[    21.289]  ABI class: X.Org Video Driver, version 18.0
[    21.290] (WW) Falling back to old probe method for vesa
[    21.290] (II) intel(0): Creating default Display subsection in Screen section
  "Default Screen Section" for depth/fbbpp 24/32
[    21.290] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    21.290] (==) intel(0): RGB weight 888
[    21.290] (==) intel(0): Default visual is TrueColor
[    21.290] (WW) intel(0): Unknown chipset
[    21.290] (**) intel(0): Relaxed fencing disabled
[    21.290] (**) intel(0): Wait on SwapBuffers? enabled
[    21.290] (**) intel(0): Triple buffering? enabled
[    21.290] (**) intel(0): Framebuffer linear
[    21.290] (**) intel(0): Pixmaps tiled
[    21.290] (**) intel(0): 3D buffers tiled
[    21.290] (**) intel(0): SwapBuffers wait enabled
[    21.290] (==) intel(0): video overlay key set to 0x101fe
[    21.290] (II) intel(0): Output eDP1 has no monitor section
[    21.290] (--) intel(0): found backlight control interface /sys/class/backlight/intel_backlight
[    21.344] (II) intel(0): Output DP1 has no monitor section
[    21.344] (II) intel(0): Output HDMI1 has no monitor section
[    21.345] (II) intel(0): Output HDMI2 has no monitor section
[    21.345] (II) intel(0): EDID for output eDP1
[    21.345] (II) intel(0): Manufacturer: CMN  Model: 15c4  Serial#: 0
[    21.345] (II) intel(0): Year: 2013  Week: 40
[    21.345] (II) intel(0): EDID Version: 1.4
[    21.345] (II) intel(0): Digital Display Input
[    21.345] (II) intel(0): 6 bits per channel
[    21.345] (II) intel(0): Digital interface is DisplayPort
[    21.345] (II) intel(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[    21.345] (II) intel(0): Gamma: 2.20
[    21.345] (II) intel(0): No DPMS capabilities specified
[    21.345] (II) intel(0): Supported color encodings: RGB 4:4:4
[    21.345] (II) intel(0): First detailed timing is preferred mode
[    21.345] (II) intel(0): Preferred mode is native pixel format and refresh rate
[    21.345] (II) intel(0): redX: 0.565 redY: 0.330   greenX: 0.323 greenY: 0.577
[    21.345] (II) intel(0): blueX: 0.160 blueY: 0.145   whiteX: 0.313 whiteY: 0.329
[    21.345] (II) intel(0): Manufacturer's mask: 0
[    21.345] (II) intel(0): Supported detailed timing:
[    21.345] (II) intel(0): clock: 136.6 MHz   Image Size:  344 x 193 mm
[    21.345] (II) intel(0): h_active: 1920  h_sync: 1964  h_sync_end 1992 h_blank_end 2070 h_border: 0
[    21.345] (II) intel(0): v_active: 1080  v_sync: 1082  v_sync_end 1086 v_blanking: 1100 v_border: 0
[    21.345] (II) intel(0):  N156HGE-EAB
[    21.345] (II) intel(0):  CMN
[    21.345] (II) intel(0):  N156HGE-EAB
[    21.345] (II) intel(0): EDID (in hex):
[    21.345] (II) intel(0):   00ffffffffffff000daec41500000000
[    21.345] (II) intel(0):   281701049522137802ef059054529329
[    21.345] (II) intel(0):   25505400000001010101010101010101
[    21.345] (II) intel(0):   0101010101015e358096703814402c1c
[    21.345] (II) intel(0):   240058c110000018000000fe004e3135
[    21.345] (II) intel(0):   364847452d4541420a20000000fe0043
[    21.345] (II) intel(0):   4d4e0a202020202020202020000000fe
[    21.345] (II) intel(0):   004e3135364847452d4541420a20001d
[    21.345] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[    21.345] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    21.345] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    21.345] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[    21.345] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[    21.345] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[    21.345] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[    21.345] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[    21.345] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[    21.345] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[    21.345] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[    21.345] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[    21.345] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[    21.345] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[    21.345] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[    21.345] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[    21.345] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[    21.345] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[    21.345] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[    21.345] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[    21.345] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[    21.345] (II) intel(0): Printing probed modes for output eDP1
[    21.345] (II) intel(0): Modeline "1920x1080"x60.0  136.62  1920 1964 1992 2070  1080 1082 1086 1100 -hsync -vsync (66.0 kHz eP)
[    21.345] (II) intel(0): Modeline "1920x1080"x59.9  138.50  1920 1968 2000 2080  1080 1083 1088 1111 +hsync -vsync (66.6 kHz d)
[    21.345] (II) intel(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz d)
[    21.345] (II) intel(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz d)
[    21.345] (II) intel(0): Modeline "1600x1024"x60.2  103.12  1600 1600 1656 1664  1024 1024 1029 1030 +hsync +vsync (62.0 kHz d)
[    21.345] (II) intel(0): Modeline "1400x1050"x60.0  122.00  1400 1488 1640 1880  1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[    21.345] (II) intel(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[    21.345] (II) intel(0): Modeline "1440x900"x59.9  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz d)
[    21.345] (II) intel(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz d)
[    21.345] (II) intel(0): Modeline "1360x768"x59.8   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsync (47.7 kHz d)
[    21.345] (II) intel(0): Modeline "1360x768"x60.0   72.00  1360 1408 1440 1520  768 771 781 790 +hsync -vsync (47.4 kHz d)
[    21.345] (II) intel(0): Modeline "1152x864"x60.0   81.62  1152 1216 1336 1520  864 865 868 895 -hsync +vsync (53.7 kHz d)
[    21.345] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[    21.345] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    21.345] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    21.345] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[    21.400] (II) intel(0): EDID for output DP1
[    21.400] (II) intel(0): EDID for output HDMI1
[    21.401] (II) intel(0): EDID for output HDMI2
[    21.401] (II) intel(0): Output eDP1 connected
[    21.401] (II) intel(0): Output DP1 disconnected
[    21.401] (II) intel(0): Output HDMI1 disconnected
[    21.401] (II) intel(0): Output HDMI2 disconnected
[    21.401] (II) intel(0): Using exact sizes for initial modes
[    21.401] (II) intel(0): Output eDP1 using initial mode 1920x1080
[    21.401] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    21.401] (II) intel(0): Kernel page flipping support detected, enabling
[    21.401] (==) intel(0): DPI set to (96, 96)
[    21.401] (II) Loading sub module "fb"
[    21.401] (II) LoadModule: "fb"
[    21.423] (II) Loading /usr/lib/xorg/modules/libfb.so
[    21.439] (II) Module fb: vendor="X.Org Foundation"
[    21.440]  compiled for 1.16.4, module version = 1.0.0
[    21.440]  ABI class: X.Org ANSI C Emulation, version 0.4
[    21.440] (II) Loading sub module "dri2"
[    21.440] (II) LoadModule: "dri2"
[    21.440] (II) Module "dri2" already built-in
[    21.440] (II) UnloadModule: "modesetting"
[    21.440] (II) Unloading modesetting
[    21.440] (II) UnloadModule: "fbdev"
[    21.440] (II) Unloading fbdev
[    21.440] (II) UnloadSubModule: "fbdevhw"
[    21.440] (II) Unloading fbdevhw
[    21.440] (II) UnloadModule: "vesa"
[    21.440] (II) Unloading vesa
[    21.440] (==) Depth 24 pixmap format is 32 bpp
[    21.440] (WW) intel(0): cannot enable DRI2 whilst forcing software fallbacks
[    21.440] (II) intel(0): Allocated new frame buffer 1920x1080 stride 7680, untiled
[    21.457] (II) UXA(0): Driver registered support for the following operations:
[    21.457] (II)         solid
[    21.457] (II)         copy
[    21.457] (II)         composite (RENDER acceleration)
[    21.457] (II)         put_image
[    21.457] (II)         get_image
[    21.457] (==) intel(0): Backing store enabled
[    21.458] (==) intel(0): Silken mouse enabled
[    21.458] (II) intel(0): Initializing HW Cursor
[    21.458] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    21.458] (==) intel(0): DPMS enabled
[    21.459] (==) intel(0): Intel XvMC decoder disabled
[    21.459] (WW) intel(0): Disabling Xv because no adaptors could be initialized.
[    21.459] (II) intel(0): direct rendering: Failed
[    21.459] (==) intel(0): hotplug detection: "enabled"
[    21.480] (--) RandR disabled
[    21.543] (II) SELinux: Disabled on system
[    21.546] (II) AIGLX: Screen 0 is not DRI2 capable
[    21.546] (EE) AIGLX: reverting to software rendering
[    22.183] (II) AIGLX: Loaded and initialized swrast
[    22.183] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[    22.183] (II) intel(0): Setting screen physical size to 508 x 285
[    22.943] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[    22.943] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    22.943] (II) LoadModule: "evdev"
[    22.944] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    23.072] (II) Module evdev: vendor="X.Org Foundation"
[    23.072]  compiled for 1.16.0, module version = 2.9.0
[    23.072]  Module class: X.Org XInput Driver
[    23.072]  ABI class: X.Org XInput driver, version 21.0
[    23.072] (II) Using input driver '
evdev' for 'Power Button'
[    23.072] (**) Power Button: always reports core events
[    23.072] (**) evdev: Power Button: Device: "/dev/input/event5"
[    23.072] (--) evdev: Power Button: Vendor 0 Product 0x1
[    23.072] (--) evdev: Power Button: Found keys
[    23.072] (II) evdev: Power Button: Configuring as keyboard
[    23.072] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event5"
[    23.072] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    23.072] (**) Option "xkb_rules" "evdev"
[    23.072] (**) Option "xkb_model" "pc105"
[    23.072] (**) Option "xkb_layout" "fr"
[    23.072] (**) Option "xkb_variant" "latin9"
[    23.229] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[    23.229] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    23.229] (II) Using input driver '
evdev' for 'Video Bus'
[    23.229] (**) Video Bus: always reports core events
[    23.229] (**) evdev: Video Bus: Device: "/dev/input/event9"
[    23.229] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    23.229] (--) evdev: Video Bus: Found keys
[    23.229] (II) evdev: Video Bus: Configuring as keyboard
[    23.229] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10/event9"
[    23.229] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    23.229] (**) Option "xkb_rules" "evdev"
[    23.229] (**) Option "xkb_model" "pc105"
[    23.229] (**) Option "xkb_layout" "fr"
[    23.229] (**) Option "xkb_variant" "latin9"
[    23.230] (II) config/udev: Adding input device Video Bus (/dev/input/event10)
[    23.230] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    23.230] (II) Using input driver '
evdev' for 'Video Bus'
[    23.230] (**) Video Bus: always reports core events
[    23.230] (**) evdev: Video Bus: Device: "/dev/input/event10"
[    23.230] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    23.230] (--) evdev: Video Bus: Found keys
[    23.230] (II) evdev: Video Bus: Configuring as keyboard
[    23.230] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:22/LNXVIDEO:01/input/input11/event10"
[    23.230] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[    23.230] (**) Option "xkb_rules" "evdev"
[    23.230] (**) Option "xkb_model" "pc105"
[    23.230] (**) Option "xkb_layout" "fr"
[    23.230] (**) Option "xkb_variant" "latin9"
[    23.230] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[    23.230] (II) No input driver specified, ignoring this device.
[    23.230] (II) This device may have been added with another device file.
[    23.230] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
[    23.230] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    23.230] (II) Using input driver '
evdev' for 'Sleep Button'
[    23.230] (**) Sleep Button: always reports core events
[    23.230] (**) evdev: Sleep Button: Device: "/dev/input/event4"
[    23.230] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    23.230] (--) evdev: Sleep Button: Found keys
[    23.230] (II) evdev: Sleep Button: Configuring as keyboard
[    23.230] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5/event4"
[    23.230] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[    23.230] (**) Option "xkb_rules" "evdev"
[    23.230] (**) Option "xkb_model" "pc105"
[    23.231] (**) Option "xkb_layout" "fr"
[    23.231] (**) Option "xkb_variant" "latin9"
[    23.231] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event11)
[    23.231] (II) No input driver specified, ignoring this device.
[    23.231] (II) This device may have been added with another device file.
[    23.231] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event12)
[    23.231] (II) No input driver specified, ignoring this device.
[    23.231] (II) This device may have been added with another device file.
[    23.231] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event13)
[    23.231] (II) No input driver specified, ignoring this device.
[    23.231] (II) This device may have been added with another device file.
[    23.231] (II) config/udev: Adding input device MOSART Semi. 2.4G Wireless Mouse (/dev/input/event1)
[    23.232] (**) MOSART Semi. 2.4G Wireless Mouse: Applying InputClass "evdev pointer catchall"
[    23.232] (II) Using input driver '
evdev' for 'MOSART Semi. 2.4G Wireless Mouse'
[    23.232] (**) MOSART Semi. 2.4G Wireless Mouse: always reports core events
[    23.232] (**) evdev: MOSART Semi. 2.4G Wireless Mouse: Device: "/dev/input/event1"
[    23.232] (--) evdev: MOSART Semi. 2.4G Wireless Mouse: Vendor 0x3938 Product 0x1031
[    23.232] (--) evdev: MOSART Semi. 2.4G Wireless Mouse: Found 9 mouse buttons
[    23.232] (--) evdev: MOSART Semi. 2.4G Wireless Mouse: Found scroll wheel(s)
[    23.232] (--) evdev: MOSART Semi. 2.4G Wireless Mouse: Found relative axes
[    23.232] (--) evdev: MOSART Semi. 2.4G Wireless Mouse: Found x and y relative axes
[    23.232] (--) evdev: MOSART Semi. 2.4G Wireless Mouse: Found absolute axes
[    23.232] (II) evdev: MOSART Semi. 2.4G Wireless Mouse: Forcing absolute x/y axes to exist.
[    23.232] (II) evdev: MOSART Semi. 2.4G Wireless Mouse: Configuring as mouse
[    23.232] (II) evdev: MOSART Semi. 2.4G Wireless Mouse: Adding scrollwheel support
[    23.232] (**) evdev: MOSART Semi. 2.4G Wireless Mouse: YAxisMapping: buttons 4 and 5
[    23.232] (**) evdev: MOSART Semi. 2.4G Wireless Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    23.232] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:3938:1031.0001/input/input3/event1"
[    23.232] (II) XINPUT: Adding extended input device "MOSART Semi. 2.4G Wireless Mouse" (type: MOUSE, id 10)
[    23.232] (II) evdev: MOSART Semi. 2.4G Wireless Mouse: initialized for relative axes.
[    23.232] (WW) evdev: MOSART Semi. 2.4G Wireless Mouse: ignoring absolute axes.
[    23.232] (**) MOSART Semi. 2.4G Wireless Mouse: (accel) keeping acceleration scheme 1
[    23.232] (**) MOSART Semi. 2.4G Wireless Mouse: (accel) acceleration profile 0
[    23.232] (**) MOSART Semi. 2.4G Wireless Mouse: (accel) acceleration factor: 2.000
[    23.232] (**) MOSART Semi. 2.4G Wireless Mouse: (accel) acceleration threshold: 4
[    23.233] (II) config/udev: Adding input device MOSART Semi. 2.4G Wireless Mouse (/dev/input/mouse0)
[    23.233] (II) No input driver specified, ignoring this device.
[    23.233] (II) This device may have been added with another device file.
[    23.233] (II) config/udev: Adding input device USB2.0 VGA UVC WebCam (/dev/input/event8)
[    23.233] (**) USB2.0 VGA UVC WebCam: Applying InputClass "evdev keyboard catchall"
[    23.233] (II) Using input driver '
evdev' for 'USB2.0 VGA UVC WebCam'
[    23.233] (**) USB2.0 VGA UVC WebCam: always reports core events
[    23.233] (**) evdev: USB2.0 VGA UVC WebCam: Device: "/dev/input/event8"
[    23.233] (--) evdev: USB2.0 VGA UVC WebCam: Vendor 0x4f2 Product 0xb483
[    23.233] (--) evdev: USB2.0 VGA UVC WebCam: Found keys
[    23.233] (II) evdev: USB2.0 VGA UVC WebCam: Configuring as keyboard
[    23.233] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input9/event8"
[    23.233] (II) XINPUT: Adding extended input device "USB2.0 VGA UVC WebCam" (type: KEYBOARD, id 11)
[    23.233] (**) Option "xkb_rules" "evdev"
[    23.233] (**) Option "xkb_model" "pc105"
[    23.233] (**) Option "xkb_layout" "fr"
[    23.233] (**) Option "xkb_variant" "latin9"
[    23.234] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event14)
[    23.234] (II) No input driver specified, ignoring this device.
[    23.234] (II) This device may have been added with another device file.
[    23.234] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event7)
[    23.234] (**) Asus WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    23.234] (II) Using input driver '
evdev' for 'Asus WMI hotkeys'
[    23.234] (**) Asus WMI hotkeys: always reports core events
[    23.234] (**) evdev: Asus WMI hotkeys: Device: "/dev/input/event7"
[    23.234] (--) evdev: Asus WMI hotkeys: Vendor 0 Product 0
[    23.234] (--) evdev: Asus WMI hotkeys: Found keys
[    23.234] (II) evdev: Asus WMI hotkeys: Configuring as keyboard
[    23.234] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input8/event7"
[    23.234] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 12)
[    23.234] (**) Option "xkb_rules" "evdev"
[    23.234] (**) Option "xkb_model" "pc105"
[    23.234] (**) Option "xkb_layout" "fr"
[    23.234] (**) Option "xkb_variant" "latin9"
[    23.235] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    23.235] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    23.235] (II) Using input driver '
evdev' for 'AT Translated Set 2 keyboard'
[    23.235] (**) AT Translated Set 2 keyboard: always reports core events
[    23.235] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[    23.235] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    23.235] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    23.235] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    23.235] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    23.235] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[    23.235] (**) Option "xkb_rules" "evdev"
[    23.235] (**) Option "xkb_model" "pc105"
[    23.235] (**) Option "xkb_layout" "fr"
[    23.235] (**) Option "xkb_variant" "latin9"
[    23.236] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event2)
[    23.236] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[    23.236] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[    23.236] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[    23.236] (II) LoadModule: "synaptics"
[    23.236] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    23.341] (II) Module synaptics: vendor="X.Org Foundation"
[    23.341]  compiled for 1.16.0.901, module version = 1.8.99
[    23.341]  Module class: X.Org XInput Driver
[    23.341]  ABI class: X.Org XInput driver, version 21.0
[    23.341] (II) Using input driver '
synaptics' for 'ETPS/2 Elantech Touchpad'
[    23.341] (**) ETPS/2 Elantech Touchpad: always reports core events
[    23.341] (**) Option "Device" "/dev/input/event2"
[    23.468] (II) synaptics: ETPS/2 Elantech Touchpad: found clickpad property
[    23.468] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 3097 (res 31)
[    23.468] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 2119 (res 32)
[    23.468] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[    23.468] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[    23.468] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left double triple
[    23.468] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[    23.468] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[    23.468] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[    23.468] (**) ETPS/2 Elantech Touchpad: always reports core events
[    23.504] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input2/event2"
[    23.504] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 14)
[    23.504] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[    23.504] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
[    23.504] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.053
[    23.504] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[    23.504] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[    23.504] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[    23.504] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[    23.504] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[    23.504] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse1)
[    23.504] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[    23.504] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[    23.504] (II) No input driver specified, ignoring this device.
[    23.504] (II) This device may have been added with another device file.
[    42.451] (II) intel(0): EDID vendor "CMN", prod id 5572
[    42.451] (II) intel(0): Printing DDC gathered Modelines:
[    42.451] (II) intel(0): Modeline "1920x1080"x0.0  136.62  1920 1964 1992 2070  1080 1082 1086 1100 -hsync -vsync (66.0 kHz eP)
[    42.510] (II) intel(0): EDID vendor "CMN", prod id 5572
[    42.510] (II) intel(0): Printing DDC gathered Modelines:
[    42.510] (II) intel(0): Modeline "1920x1080"x0.0  136.62  1920 1964 1992 2070  1080 1082 1086 1100 -hsync -vsync (66.0 kHz eP)
[    42.641] (II) intel(0): EDID vendor "CMN", prod id 5572
[    42.641] (II) intel(0): Printing DDC gathered Modelines:
[    42.641] (II) intel(0): Modeline "1920x1080"x0.0  136.62  1920 1964 1992 2070  1080 1082 1086 1100 -hsync -vsync (66.0 kHz eP)
[    44.788] (II) intel(0): EDID vendor "CMN", prod id 5572
[    44.788] (II) intel(0): Printing DDC gathered Modelines:
[    44.788] (II) intel(0): Modeline "1920x1080"x0.0  136.62  1920 1964 1992 2070  1080 1082 1086 1100 -hsync -vsync (66.0 kHz eP)




------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Réponse à :

 apt-get install xinput



Téléchargement de xinput

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Réponse à :

 xinput --list-props "ETPS/2 Elantech Touchpad"



 
No protocol specified
Unable to connect to X server



Voila toutes les réponses aux commandes demandées !

Merci d'avance !

#17 Re : Matériel » Problème Pad PC Portable [Résolu] » 25-04-2018 19:55:08

Debion

 dmesg | grep -i dmi:



donne

 [    0.000000] DMI: ASUSTeK COMPUTER INC. K501LX/K501LX, BIOS K501LX.206 09/16/2015



Voilà la réponses.

Merci d'avance !

#18 Re : Matériel » Problème Pad PC Portable [Résolu] » 24-04-2018 19:10:19

Debion
Car dans préfèrence de la souris section pavé tactile du centre de contrôle, il est affiché que le pavé tactile est activé alors qu'il ne fonctionne pas.

Le curseur de ma souris ne bouge qu'avec une souris en périphérique.

J'ai installé hardinfo, dans les entrées indiquées dans le sommaire, il y a inscrit " ETPS/2 Elantech TouchPad.

Je n'arrive pas à régler le problème.

Merci d'avance !

#19 Re : Matériel » Problème Pad PC Portable [Résolu] » 23-04-2018 18:07:37

Debion
Malheureusement la solution n'est pas dans ce wiki car je ne veux pas le paramétrer mais l'activer. Car il n'est pas reconnu.

Merci d'avance !

#20 Matériel » Problème Pad PC Portable [Résolu] » 18-04-2018 10:36:53

Debion
Réponses : 11
Bonjour,

Je possède actuellement un ordinateur portable Asus avec Debian 8.

Le problème, c'est qu'il ne fonctionne qu'avec une souris. Le pad tactile ne fonctionne pas.

Comment faire car avant sous Windows, et il fonctionnait ?

Merci d'avance.

#21 Re : Système » Code Erreur pendant Boot [Résolu] » 11-04-2018 16:18:51

Debion
Merci de vos aides, le problème est rectifié !

#22 Re : Système » Code Erreur pendant Boot [Résolu] » 11-04-2018 14:52:15

Debion
Les commandes :

 cat /etc/fstab



renvoie

 # /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda6 during installation
UUID=f496c32f-a49f-4f8c-b8bd-b9245741b3ab /               ext4    errors=remount-ro 0       1
# /boot/efi was on /dev/sda1 during installation
UUID=ECB9-A59A  /boot/efi       vfat    umask=0077      0       1
# swap was on /dev/sda7 during installation
UUID=5490fccf-d217-45e9-9ccc-c13599b87d44 none            swap    sw              0       0
 




et

 blkid



renvoie

 /dev/sda1: LABEL="SYSTEM" UUID="ECB9-A59A" TYPE="vfat" PARTLABEL="System EFI Partition" PARTUUID="d6f6a60f-cd3d-4cc1-bd08-17f1a56e7d48"
/dev/sda6: UUID="f496c32f-a49f-4f8c-b8bd-b9245741b3ab" TYPE="ext4" PARTLABEL="System Stockage Debian" PARTUUID="bf1f5d34-d0aa-4359-ba50-789741a295d4"
/dev/sda7: UUID="e52a3000-13c8-41a1-b01d-a3d8a2bfc4aa" TYPE="swap" PARTLABEL="System OS Debian" PARTUUID="e00e9401-f745-429a-9fb9-afba9f347d88"
 



Mais pour la phase d'après, je suis sur Debian 8 Jessie et pour la commande:

 nano /etc/apt/sources.list



Je n'ai rien changé car il y a déjà ça d'inscrit dessus :

 deb http://httpredir.debian.org/debian/ jessie main contrib non-free #

# deb cdrom:[Debian GNU/Linux 8.10.0 _Jessie_ - Official amd64 NETINST Binary-1$

#deb cdrom:[Debian GNU/Linux 8.10.0 _Jessie_ - Official amd64 NETINST Binary-1 $

deb http://ftp.fr.debian.org/debian/ jessie main
deb-src http://ftp.fr.debian.org/debian/ jessie main

deb http://security.debian.org/ jessie/updates main
deb-src http://security.debian.org/ jessie/updates main

# jessie-updates, previously known as 'volatile'
deb http://ftp.fr.debian.org/debian/ jessie-updates main
deb-src http://ftp.fr.debian.org/debian/ jessie-updates main

# Steam
  deb [arch=i386] http://repo.steampowered.com/steam/ precise steam
 

#23 Re : Système » Code Erreur pendant Boot [Résolu] » 08-04-2018 15:52:45

Debion
Merci de m'avoir aiguiller mais comment régler ce problème ?!

#24 Re : Cinnamon » Cinnamon Bug [Résolu] » 08-04-2018 09:52:46

Debion
Je n'utilise plus Cinnamon, j'utilise Mate.

Merci quand même !

#25 Système » Code Erreur pendant Boot [Résolu] » 07-04-2018 18:53:40

Debion
Réponses : 12
Bonsoir,

Quand j'allume mon ordinateur, j'arrive sur le Grub, je choisis Debian. mon écran indique :

Loading, please wait
/dev/sda6: clean, 311916/11730944 files, 6561872/46908928 blocks
[          2.295684] usb 1-6: string descriptor 0 read error: -22
[          8.355082] usb 1-6: firmware: failed to load ar3k/AthrBT_0x11020 (...)
[          8.393469] Bluetooth, Loading patch file failed
[         11.164268] systemd-fsck[503]: fsck.fat 3.0.27 (2014-11-12)
[         11.164790] systemd-fsck[503]: /dev/sda1 : 10 files, 373/66414 (...)
A start a job is running for dev-disk-by\ (...) [ 2s/1min30]



Avant seules les 7 premières phrases était indiquées mais une huitième est apparu avec un chrono d'une minute 30. puis Debian se lance.

Que faire pour régler ce problème ?

Merci d'avance !

Pied de page des forums

Propulsé par FluxBB