Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#1 Re : Multimédia » motion : produire des avi sur détection de mouvements » 27-03-2020 16:27:17

Bon,
j'ai repris à partir de motion.conf origine (celle de debian "Stretch") et modifier par la suite,alors ca fonctionne beaucoup mieux mais la video est sacader.

Le motion.conf ancien venait de motion de ubuntu 10.10 qui était un peu modifier (de quoi spécifier @ip de la caméra).

Probléme semble résolut à part la video qui saccade.

Merci.

#2 Re : Multimédia » motion : produire des avi sur détection de mouvements » 22-02-2020 20:46:57

ffmpeg_timelapse est à 0,
ce n'est pas le fichier de base que j'ai envoyé, c'est un fichier avec quelques modification.

J'ai une caméra réseau et faut bien entrer @ip et utilisateur mot de passe et le dossier de stockage.

Je ne comprend pas :
'Je te suggère de demander a motion d'afficher la "box" autour de la zone ou le mouvement est détectée.'

#3 Multimédia » motion : produire des avi sur détection de mouvements » 08-02-2020 19:15:53

sizy458
Réponses : 5
Bonjour,

J'ai un utilitaire linux motion qui est censer de produire des avi sur detection de mouvement,
finalement ca produit des avi et jpg sans detection de mouvement si 'ffmpeg_timelapse 1'
ou que des jpeg (je pense sans detection de mouvement).

Qu'est ce que je dois modifier dans ce fichier pour produire que motion produit des fichiers .avi sur détection de mouvement ?

Voici le fichier config :

motion.conf

# motion.conf
#
# This config file was generated by motion 3.2.11


############################################################
# Daemon
############################################################

# Start in daemon (background) mode and release terminal (default: off)
daemon off

#File to store the process ID, also called pid file. (default: not defined)
process_id_file /var/run/motion/motion.pid

############################################################
# Basic Setup Mode
############################################################

# Start in Setup-Mode, daemon disabled. (default: off)
setup_mode off


###########################################################
# Capture device options
############################################################

# Videodevice to be used for capturing  (default /dev/video0)
# for FreeBSD default is /dev/bktr0
videodevice /dev/video0

# v4l2_palette allows to choose preferable palette to be use by motion
# to capture from those supported by your videodevice. (default: 8)
# E.g. if your videodevice supports both V4L2_PIX_FMT_SBGGR8 and
# V4L2_PIX_FMT_MJPEG then motion will by default use V4L2_PIX_FMT_MJPEG.
# Setting v4l2_palette to 1 forces motion to use V4L2_PIX_FMT_SBGGR8
# instead.
#
# Values :
# V4L2_PIX_FMT_SN9C10X : 0  'S910'
# V4L2_PIX_FMT_SBGGR8  : 1  'BA81'
# V4L2_PIX_FMT_MJPEG   : 2  'MJPEG'
# V4L2_PIX_FMT_JPEG    : 3  'JPEG'
# V4L2_PIX_FMT_RGB24   : 4  'RGB3'
# V4L2_PIX_FMT_UYVY    : 5  'UYVY'
# V4L2_PIX_FMT_YUYV    : 6  'YUYV'
# V4L2_PIX_FMT_YUV422P : 7  '422P'
# V4L2_PIX_FMT_YUV420  : 8  'YU12'
v4l2_palette 3

# The video input to be used (default: 8)
# Should normally be set to 0 or 1 for video/TV cards, and 8 for USB cameras
input 8

# The video norm to use (only for video capture and TV tuner cards)
# Values: 0 (PAL), 1 (NTSC), 2 (SECAM), 3 (PAL NC no colour). Default: 0 (PAL)
norm 0

# The frequency to set the tuner to (kHz) (only for TV tuner cards) (default: 0)
frequency 0

# Rotate image this number of degrees. The rotation affects all saved images as
# well as mpeg movies. Valid values: 0 (default = no rotation), 90, 180 and 270.
rotate 0

# Image width (pixels). Valid range: Camera dependent, default: 352
width 800

# Image height (pixels). Valid range: Camera dependent, default: 288
height 448

# Maximum number of frames to be captured per second.
# Valid range: 2-100. Default: 100 (almost no limit).
framerate 30

# Minimum time in seconds between capturing picture frames from the camera.
# Default: 0 = disabled - the capture rate is given by the camera framerate.
# This option is used when you want to capture images at a rate lower than 2 per second.
minimum_frame_time 0

# URL to use if you are using a network camera, size will be autodetected (incl http:// ftp:// or file:///)
# Must be a URL that returns single jpeg pictures or a raw mjpeg stream. Default: Not defined
; netcam_url value
netcam_url http://192.168.0.104/image.jpg
# Username and password for network camera (only if required). Default: not defined
# Syntax is user:password
; netcam_userpass value
netcam_userpass nonoa:cvx
# The setting for keep-alive of network socket, should improve performance on compatible net cameras.
# 1.0:         The historical implementation using HTTP/1.0, closing the socket after each http request.
# keep_alive:  Use HTTP/1.0 requests with keep alive header to reuse the same connection.
# 1.1:         Use HTTP/1.1 requests that support keep alive as default.
# Default: 1.0
netcam_http 1.0

# URL to use for a netcam proxy server, if required, e.g. "http://myproxy".
# If a port number other than 80 is needed, use "http://myproxy:1234".
# Default: not defined
; netcam_proxy value

# Set less strict jpeg checks for network cameras with a poor/buggy firmware.
# Default: off
netcam_tolerant_check off

# Let motion regulate the brightness of a video device (default: off).
# The auto_brightness feature uses the brightness option as its target value.
# If brightness is zero auto_brightness will adjust to average brightness value 128.
# Only recommended for cameras without auto brightness
auto_brightness off

# Set the initial brightness of a video device.
# If auto_brightness is enabled, this value defines the average brightness level
# which Motion will try and adjust to.
# Valid range 0-255, default 0 = disabled
brightness 24

# Set the contrast of a video device.
# Valid range 0-255, default 0 = disabled
contrast 8

# Set the saturation of a video device.
# Valid range 0-255, default 0 = disabled
saturation 8

# Set the hue of a video device (NTSC feature).
# Valid range 0-255, default 0 = disabled
hue 0


############################################################
# Round Robin (multiple inputs on same video device name)
############################################################

# Number of frames to capture in each roundrobin step (default: 1)
roundrobin_frames 1

# Number of frames to skip before each roundrobin step (default: 1)
roundrobin_skip 1

# Try to filter out noise generated by roundrobin (default: off)
switchfilter off


############################################################
# Motion Detection Settings:
############################################################

# Threshold for number of changed pixels in an image that
# triggers motion detection (default: 1500)
threshold 1500

# Automatically tune the threshold down if possible (default: off)
threshold_tune off

# Noise threshold for the motion detection (default: 32)
noise_level 32

# Automatically tune the noise threshold (default: on)
noise_tune on

# Despeckle motion image using (e)rode or (d)ilate or (l)abel (Default: not defined)
# Recommended value is EedDl. Any combination (and number of) of E, e, d, and D is valid.
# (l)abeling must only be used once and the 'l' must be the last letter.
# Comment out to disable
despeckle EedDl

# Detect motion in predefined areas (1 - 9). Areas are numbered like that:  1 2 3
# A script (on_area_detected) is started immediately when motion is         4 5 6
# detected in one of the given areas, but only once during an event.        7 8 9
# One or more areas can be specified with this option. (Default: not defined)
; area_detect value

# PGM file to use as a sensitivity mask.
# Full path name to. (Default: not defined)
; mask_file value

# Dynamically create a mask file during operation (default: 0)
# Adjust speed of mask changes from 0 (off) to 10 (fast)
smart_mask_speed 0

# Ignore sudden massive light intensity changes given as a percentage of the picture
# area that changed intensity. Valid range: 0 - 100 , default: 0 = disabled
lightswitch 0

# Picture frames must contain motion at least the specified number of frames
# in a row before they are detected as true motion. At the default of 1, all
# motion is detected. Valid range: 1 to thousands, recommended 1-5
minimum_motion_frames 3

# Specifies the number of pre-captured (buffered) pictures from before motion
# was detected that will be output at motion detection.
# Recommended range: 0 to 5 (default: 0)
# Do not use large values! Large values will cause Motion to skip video frames and
# cause unsmooth mpegs. To smooth mpegs use larger values of post_capture instead.
pre_capture 0

# Number of frames to capture after motion is no longer detected (default: 0)
post_capture 0

# Gap is the seconds of no motion detection that triggers the end of an event
# An event is defined as a series of motion images taken within a short timeframe.
# Recommended value is 60 seconds (Default). The value 0 is allowed and disables
# events causing all Motion to be written to one single mpeg file and no pre_capture.
gap 60

# Maximum length in seconds of an mpeg movie
# When value is exceeded a new mpeg file is created. (Default: 0 = infinite)
max_mpeg_time 0

# Always save images even if there was no motion (default: off)
output_all off


############################################################
# Image File Output
############################################################

# Output 'normal' pictures when motion is detected (default: on)
# Valid values: on, off, first, best, center
# When set to 'first', only the first picture of an event is saved.
# Picture with most motion of an event is saved when set to 'best'.
# Picture with motion nearest center of picture is saved when set to 'center'.
# Can be used as preview shot for the corresponding movie.
output_normal off

# Output pictures with only the pixels moving object (ghost images) (default: off)
output_motion off

# The quality (in percent) to be used by the jpeg compression (default: 75)
quality 96

# Output ppm images instead of jpeg (default: off)
ppm off


############################################################
# FFMPEG related options
# Film (mpeg) file output, and deinterlacing of the video input
# The options movie_filename and timelapse_filename are also used
# by the ffmpeg feature
############################################################

# Use ffmpeg to encode mpeg movies in realtime (default: off)
ffmpeg_cap_new off

# Use ffmpeg to make movies with only the pixels moving
# object (ghost images) (default: off)
ffmpeg_cap_motion on

# Use ffmpeg to encode a timelapse movie
# Default value 0 = off - else save frame every Nth second
ffmpeg_timelapse 0

# The file rollover mode of the timelapse video
# Valid values: hourly, daily (default), weekly-sunday, weekly-monday, monthly, manual
ffmpeg_timelapse_mode daily

# Bitrate to be used by the ffmpeg encoder (default: 400000)
# This option is ignored if ffmpeg_variable_bitrate is not 0 (disabled)
ffmpeg_bps 3000000

# Enables and defines variable bitrate for the ffmpeg encoder.
# ffmpeg_bps is ignored if variable bitrate is enabled.
# Valid values: 0 (default) = fixed bitrate defined by ffmpeg_bps,
# or the range 2 - 31 where 2 means best quality and 31 is worst.
ffmpeg_variable_bitrate 0

# Codec to used by ffmpeg for the video compression.
# Timelapse mpegs are always made in mpeg1 format independent from this option.
# Supported formats are: mpeg1 (ffmpeg-0.4.8 only), mpeg4 (default), and msmpeg4.
# mpeg1 - gives you files with extension .mpg
# mpeg4 or msmpeg4 - gives you files with extension .avi
# msmpeg4 is recommended for use with Windows Media Player because
# it requires no installation of codec on the Windows client.
# swf - gives you a flash film with extension .swf
# flv - gives you a flash video with extension .flv
# ffv1 - FF video codec 1 for Lossless Encoding ( experimental )
# mov - QuickTime ( testing )
ffmpeg_video_codec mpeg4

# Use ffmpeg to deinterlace video. Necessary if you use an analog camera
# and see horizontal combing on moving objects in video or pictures.
# (default: off)
ffmpeg_deinterlace off


############################################################
# Snapshots (Traditional Periodic Webcam File Output)
############################################################

# Make automated snapshot every N seconds (default: 0 = disabled)
snapshot_interval 0


############################################################
# Text Display
# %Y = year, %m = month, %d = date,
# %H = hour, %M = minute, %S = second, %T = HH:MM:SS,
# %v = event, %q = frame number, %t = thread (camera) number,
# %D = changed pixels, %N = noise level, \n = new line,
# %i and %J = width and height of motion area,
# %K and %L = X and Y coordinates of motion center
# %C = value defined by text_event - do not use with text_event!
# You can put quotation marks around the text to allow
# leading spaces
############################################################

# Locate and draw a box around the moving object.
# Valid values: on, off and preview (default: off)
# Set to 'preview' will only draw a box in preview_shot pictures.
locate off

# Draws the timestamp using same options as C function strftime(3)
# Default: %Y-%m-%d\n%T = date in ISO format and time in 24 hour clock
# Text is placed in lower right corner
text_right %Y-%m-%d\n%T-%q

# Draw a user defined text on the images using same options as C function strftime(3)
# Default: Not defined = no text
# Text is placed in lower left corner
; text_left value

# Draw the number of changed pixed on the images (default: off)
# Will normally be set to off except when you setup and adjust the motion settings
# Text is placed in upper right corner
text_changes off

# This option defines the value of the special event conversion specifier %C
# You can use any conversion specifier in this option except %C. Date and time
# values are from the timestamp of the first image in the current event.
# Default: %Y%m%d%H%M%S
# The idea is that %C can be used filenames and text_left/right for creating
# a unique identifier for each event.
text_event %Y%m%d%H%M%S

# Draw characters at twice normal size on images. (default: off)
text_double off


############################################################
# Target Directories and filenames For Images And Films
# For the options snapshot_, jpeg_, mpeg_ and timelapse_filename
# you can use conversion specifiers
# %Y = year, %m = month, %d = date,
# %H = hour, %M = minute, %S = second,
# %v = event, %q = frame number, %t = thread (camera) number,
# %D = changed pixels, %N = noise level,
# %i and %J = width and height of motion area,
# %K and %L = X and Y coordinates of motion center
# %C = value defined by text_event
# Quotation marks round string are allowed.
############################################################

# Target base directory for pictures and films
# Recommended to use absolute path. (Default: current working directory)
target_dir /media/data/capt

# File path for snapshots (jpeg or ppm) relative to target_dir
# Default: %v-%Y%m%d%H%M%S-snapshot
# Default value is equivalent to legacy oldlayout option
# For Motion 3.0 compatible mode choose: %Y/%m/%d/%H/%M/%S-snapshot
# File extension .jpg or .ppm is automatically added so do not include this.
# Note: A symbolic link called lastsnap.jpg created in the target_dir will always
# point to the latest snapshot, unless snapshot_filename is exactly 'lastsnap'
snapshot_filename %v-%Y%m%d%H%M%S-snapshot

# File path for motion triggered images (jpeg or ppm) relative to target_dir
# Default: %v-%Y%m%d%H%M%S-%q
# Default value is equivalent to legacy oldlayout option
# For Motion 3.0 compatible mode choose: %Y/%m/%d/%H/%M/%S-%q
# File extension .jpg or .ppm is automatically added so do not include this
# Set to 'preview' together with best-preview feature enables special naming
# convention for preview shots. See motion guide for details
jpeg_filename %v-%Y%m%d%H%M%S-%q

# File path for motion triggered ffmpeg films (mpeg) relative to target_dir
# Default: %v-%Y%m%d%H%M%S
# Default value is equivalent to legacy oldlayout option
# For Motion 3.0 compatible mode choose: %Y/%m/%d/%H%M%S
# File extension .mpg or .avi is automatically added so do not include this
# This option was previously called ffmpeg_filename
movie_filename %v-%Y%m%d%H%M%S

# File path for timelapse mpegs relative to target_dir
# Default: %Y%m%d-timelapse
# Default value is near equivalent to legacy oldlayout option
# For Motion 3.0 compatible mode choose: %Y/%m/%d-timelapse
# File extension .mpg is automatically added so do not include this
timelapse_filename %Y%m%d-timelapse


############################################################
# Live Webcam Server
############################################################

# The mini-http server listens to this port for requests (default: 0 = disabled)
webcam_port 8082

# Quality of the jpeg images produced (default: 50)
webcam_quality 95

# Output frames at 1 fps when no motion is detected and increase to the
# rate given by webcam_maxrate when motion is detected (default: off)
webcam_motion off

# Maximum framerate for webcam streams (default: 1)
webcam_maxrate 1

# Restrict webcam connections to localhost only (default: on)
webcam_localhost on

# Limits the number of images per connection (default: 0 = unlimited)
# Number can be defined by multiplying actual webcam rate by desired number of seconds
# Actual webcam rate is the smallest of the numbers framerate and webcam_maxrate
webcam_limit 0


############################################################
# HTTP Based Control
############################################################

# TCP/IP port for the http server to listen on (default: 0 = disabled)
control_port 8081

# Restrict control connections to localhost only (default: on)
control_localhost off

# Output for http server, select off to choose raw text plain (default: on)
control_html_output on

# Authentication for the http based control. Syntax username:password
# Default: not defined (Disabled)
control_authentication dolo:mv


############################################################
# Tracking (Pan/Tilt)
############################################################

# Type of tracker (0=none (default), 1=stepper, 2=iomojo, 3=pwc, 4=generic, 5=uvcvideo)
# The generic type enables the definition of motion center and motion size to
# be used with the conversion specifiers for options like on_motion_detected
track_type 0

# Enable auto tracking (default: off)
track_auto off

# Serial port of motor (default: none)
; track_port value

# Motor number for x-axis (default: 0)
track_motorx 0

# Motor number for y-axis (default: 0)
track_motory 0

# Maximum value on x-axis (default: 0)
track_maxx 0

# Maximum value on y-axis (default: 0)
track_maxy 0

# ID of an iomojo camera if used (default: 0)
track_iomojo_id 0

# Angle in degrees the camera moves per step on the X-axis
# with auto-track (default: 10)
# Currently only used with pwc type cameras
track_step_angle_x 10

# Angle in degrees the camera moves per step on the Y-axis
# with auto-track (default: 10)
# Currently only used with pwc type cameras
track_step_angle_y 10

# Delay to wait for after tracking movement as number
# of picture frames (default: 10)
track_move_wait 10

# Speed to set the motor to (stepper motor option) (default: 255)
track_speed 255

# Number of steps to make (stepper motor option) (default: 40)
track_stepsize 40


############################################################
# External Commands, Warnings and Logging:
# You can use conversion specifiers for the on_xxxx commands
# %Y = year, %m = month, %d = date,
# %H = hour, %M = minute, %S = second,
# %v = event, %q = frame number, %t = thread (camera) number,
# %D = changed pixels, %N = noise level,
# %i and %J = width and height of motion area,
# %K and %L = X and Y coordinates of motion center
# %C = value defined by text_event
# %f = filename with full path
# %n = number indicating filetype
# Both %f and %n are only defined for on_picture_save,
# on_movie_start and on_movie_end
# Quotation marks round string are allowed.
############################################################

# Do not sound beeps when detecting motion (default: on)
# Note: Motion never beeps when running in daemon mode.
quiet on

# Command to be executed when an event starts. (default: none)
# An event starts at first motion detected after a period of no motion defined by gap
; on_event_start value

# Command to be executed when an event ends after a period of no motion
# (default: none). The period of no motion is defined by option gap.
; on_event_end value

# Command to be executed when a picture (.ppm|.jpg) is saved (default: none)
# To give the filename as an argument to a command append it with %f
; on_picture_save value

# Command to be executed when a motion frame is detected (default: none)
; on_motion_detected value

# Command to be executed when motion in a predefined area is detected
# Check option 'area_detect'. (default: none)
; on_area_detected value

# Command to be executed when a movie file (.mpg|.avi) is created. (default: none)
# To give the filename as an argument to a command append it with %f
; on_movie_start value

# Command to be executed when a movie file (.mpg|.avi) is closed. (default: none)
# To give the filename as an argument to a command append it with %f
; on_movie_end value

# Command to be executed when a camera can't be opened or if it is lost
# NOTE: There is situations when motion doesn't detect a lost camera!
# It depends on the driver, some drivers don't detect a lost camera at all
# Some hang the motion thread. Some even hang the PC! (default: none)
; on_camera_lost value


############################################################
# Common Options For MySQL and PostgreSQL database features.
# Options require the MySQL/PostgreSQL options to be active also.
############################################################

# Log to the database when creating motion triggered image file  (default: on)
sql_log_image on

# Log to the database when creating a snapshot image file (default: on)
sql_log_snapshot on

# Log to the database when creating motion triggered mpeg file (default: off)
sql_log_mpeg off

# Log to the database when creating timelapse mpeg file (default: off)
sql_log_timelapse off

# SQL query string that is sent to the database
# Use same conversion specifiers has for text features
# Additional special conversion specifiers are
# %n = the number representing the file_type
# %f = filename with full path
# Default value:
# insert into security(camera, filename, frame, file_type, time_stamp, text_event) values('%t', '%f', '%q', '%n', '%Y-%m-%d %T', '%C')
sql_query insert into security(camera, filename, frame, file_type, time_stamp, event_time_stamp) values('%t', '%f', '%q', '%n', '%Y-%m-%d %T', '%C')


############################################################
# Database Options For MySQL
############################################################

# Mysql database to log to (default: not defined)
; mysql_db value

# The host on which the database is located (default: localhost)
mysql_host localhost

# User account name for MySQL database (default: not defined)
; mysql_user value

# User password for MySQL database (default: not defined)
; mysql_password value


############################################################
# Database Options For PostgreSQL
############################################################

# PostgreSQL database to log to (default: not defined)
; pgsql_db value

# The host on which the database is located (default: localhost)
pgsql_host localhost

# User account name for PostgreSQL database (default: not defined)
; pgsql_user value

# User password for PostgreSQL database (default: not defined)
; pgsql_password value

# Port on which the PostgreSQL database is located (default: 5432)
pgsql_port 5432


############################################################
# Video Loopback Device (vloopback project)
############################################################

# Output images to a video4linux loopback device
# The value '-' means next available (default: not defined)
; video_pipe value

# Output motion images to a video4linux loopback device
# The value '-' means next available (default: not defined)
; motion_video_pipe value


##############################################################
# Thread config files - One for each camera.
# Except if only one camera - You only need this config file.
# If you have more than one camera you MUST define one thread
# config file for each camera in addition to this config file.
##############################################################


; thread /usr/local/etc/thread1.conf




Merci

#4 Re : Système » nautilus trés lent » 04-01-2020 23:00:15

Je ne sais pas si cela vient de mon disque ou du controleur sata ?
Je testerais les performances smart.

#5 Re : Système » nautilus trés lent » 04-01-2020 10:02:24

J'ai essayer avec thunar, c'est la même chose.

#6 Re : Système » nautilus trés lent » 30-12-2019 10:27:20

J'avais déjà désactiver les vignettes mais pareille.
Ma vieille machine est un AMD Athlon avec 4Gb de ram.

#7 Système » nautilus trés lent » 29-12-2019 12:20:26

sizy458
Réponses : 8
Bonjour,

J'ai debian stretch installé sur une veille machine agé de 8 ans, ainsi le disque dur agé de 7 ans.

Dans nautilus quand je clique sur un répertoire , ok.
Dans nautilus quand je clique sur un répertoire contenant des milliers de fichier jpeg, c'est horriblement lent ! à un point quand je double clique sur un de ces fichiers, je dois attendre des minutes pour
en voir le contenue.
Les fichiers jpeg sont générer par  l'utilitaire 'motion'


Avez vous une solution ?

Merci.

#9 Système » Pour les utilisateur debian stretch » 29-11-2019 17:35:16

sizy458
Réponses : 1
Bonjour,

Pour les utilisateurs de debian stretch,
il est impossible d'administrer un serveur RDP,VNC.



root@multimedia:/home/user# vncserver -localhost no

Warning: multimedia:1 is taken because of /tmp/.X11-unix/X1
Remove this file if there is no X server multimedia:1

New 'multimedia:2 (root)' desktop at :2 on machine multimedia

Starting applications specified in /etc/X11/Xvnc-session
Log file is /root/.vnc/multimedia:2.log

Use xtigervncviewer -SecurityTypes VncAuth,TLSVnc -passwd /root/.vnc/passwd multimedia:2 to connect to the VNC server.


vncserver: Failed command '/etc/X11/Xvnc-session': 256!

=================== tail -15 /root/.vnc/multimedia:2.log ===================
Xvnc TigerVNC 1.7.0 - built Apr  9 2017 14:38:13
Copyright (C) 1999-2016 TigerVNC Team and many others (see README.txt)
See http://www.tigervnc.org for information on TigerVNC.
Underlying X server release 11903000, The X.Org Foundation


Fri Nov 29 17:36:40 2019
 vncext:      VNC extension running!
 vncext:      Listening for VNC connections on all interface(s), port 5902
 vncext:      created VNC server for screen 0
mesg: échec de ttyname: Ioctl() inapproprié pour un périphérique
Terminated
XIO:  fatal IO error 11 (Resource temporarily unavailable) on X server ":2"
      after 173 requests (173 known processed) with 0 events remaining.
Killing Xtigervnc process ID 3387... which seems to be deadlocked. Using SIGKILL!

============================================================================

Starting applications specified in /etc/X11/Xvnc-session has failed.
Maybe try something simple first, e.g.,
  tigervncserver -xstartup /usr/bin/xterm
root@multimedia:/home/user#

 




Pour le serveur RDP buggé c'est pareille.
Je perd mon temps.


Voilà.

#10 Re : Système » motion ,comment ne pas sauvegarder fichiers jpeg » 22-11-2019 19:36:15

Je pensais que ca marcher , ben non , c'est comme avant , il produit toujours fichiers jpeg.
Désolé.

Probléme non résolut.

#11 Re : Système » motion ,comment ne pas sauvegarder fichiers jpeg » 22-11-2019 19:27:57

Désolé,
mais ca ne marche pas ,
il me produit toujours les fichiers jpeg.


j'ai mis output_normal à off et ca ne marche pas ;

#12 Système » motion ,comment ne pas sauvegarder fichiers jpeg » 22-11-2019 17:00:24

sizy458
Réponses : 3
Bonjour,

J'ai le paquet 'motion' installé ca fonctionne moyen ,
je voudrais que motion enregistre les images sur mouvement détectés,
et ne pas générer des fichiers JPG,car je suis obliger de les supprimer à chaque fois.
Je voudrais que motion me générer que des fichiers .avi ou mp4 (peu importe)
C'est une caméra réseau connecté filaire.

Merci.

Je joint la configuration

# motion.conf
#
# This config file was generated by motion 3.2.11


############################################################
# Daemon
############################################################

# Start in daemon (background) mode and release terminal (default: off)
daemon off

#File to store the process ID, also called pid file. (default: not defined)
process_id_file /var/run/motion/motion.pid

############################################################
# Basic Setup Mode
############################################################

# Start in Setup-Mode, daemon disabled. (default: off)
setup_mode off


###########################################################
# Capture device options
############################################################

# Videodevice to be used for capturing  (default /dev/video0)
# for FreeBSD default is /dev/bktr0
videodevice /dev/video0

# v4l2_palette allows to choose preferable palette to be use by motion
# to capture from those supported by your videodevice. (default: 8)
# E.g. if your videodevice supports both V4L2_PIX_FMT_SBGGR8 and
# V4L2_PIX_FMT_MJPEG then motion will by default use V4L2_PIX_FMT_MJPEG.
# Setting v4l2_palette to 1 forces motion to use V4L2_PIX_FMT_SBGGR8
# instead.
#
# Values :
# V4L2_PIX_FMT_SN9C10X : 0  'S910'
# V4L2_PIX_FMT_SBGGR8  : 1  'BA81'
# V4L2_PIX_FMT_MJPEG   : 2  'MJPEG'
# V4L2_PIX_FMT_JPEG    : 3  'JPEG'
# V4L2_PIX_FMT_RGB24   : 4  'RGB3'
# V4L2_PIX_FMT_UYVY    : 5  'UYVY'
# V4L2_PIX_FMT_YUYV    : 6  'YUYV'
# V4L2_PIX_FMT_YUV422P : 7  '422P'
# V4L2_PIX_FMT_YUV420  : 8  'YU12'
v4l2_palette 3

# The video input to be used (default: 8)
# Should normally be set to 0 or 1 for video/TV cards, and 8 for USB cameras
input 8

# The video norm to use (only for video capture and TV tuner cards)
# Values: 0 (PAL), 1 (NTSC), 2 (SECAM), 3 (PAL NC no colour). Default: 0 (PAL)
norm 0

# The frequency to set the tuner to (kHz) (only for TV tuner cards) (default: 0)
frequency 0

# Rotate image this number of degrees. The rotation affects all saved images as
# well as mpeg movies. Valid values: 0 (default = no rotation), 90, 180 and 270.
rotate 0

# Image width (pixels). Valid range: Camera dependent, default: 352
width 800

# Image height (pixels). Valid range: Camera dependent, default: 288
height 448

# Maximum number of frames to be captured per second.
# Valid range: 2-100. Default: 100 (almost no limit).
framerate 20

# Minimum time in seconds between capturing picture frames from the camera.
# Default: 0 = disabled - the capture rate is given by the camera framerate.
# This option is used when you want to capture images at a rate lower than 2 per second.
minimum_frame_time 0

# URL to use if you are using a network camera, size will be autodetected (incl http:// ftp:// or file:///)
# Must be a URL that returns single jpeg pictures or a raw mjpeg stream. Default: Not defined
; netcam_url value
netcam_url http://192.168.0.104/image.jpg
# Username and password for network camera (only if required). Default: not defined
# Syntax is user:password
; netcam_userpass value
netcam_userpass user:mypassword
# The setting for keep-alive of network socket, should improve performance on compatible net cameras.
# 1.0:         The historical implementation using HTTP/1.0, closing the socket after each http request.
# keep_alive:  Use HTTP/1.0 requests with keep alive header to reuse the same connection.
# 1.1:         Use HTTP/1.1 requests that support keep alive as default.
# Default: 1.0
netcam_http 1.0

# URL to use for a netcam proxy server, if required, e.g. "http://myproxy".
# If a port number other than 80 is needed, use "http://myproxy:1234".
# Default: not defined
; netcam_proxy value

# Set less strict jpeg checks for network cameras with a poor/buggy firmware.
# Default: off
netcam_tolerant_check off

# Let motion regulate the brightness of a video device (default: off).
# The auto_brightness feature uses the brightness option as its target value.
# If brightness is zero auto_brightness will adjust to average brightness value 128.
# Only recommended for cameras without auto brightness
auto_brightness off

# Set the initial brightness of a video device.
# If auto_brightness is enabled, this value defines the average brightness level
# which Motion will try and adjust to.
# Valid range 0-255, default 0 = disabled
brightness 24

# Set the contrast of a video device.
# Valid range 0-255, default 0 = disabled
contrast 8

# Set the saturation of a video device.
# Valid range 0-255, default 0 = disabled
saturation 8

# Set the hue of a video device (NTSC feature).
# Valid range 0-255, default 0 = disabled
hue 0


############################################################
# Round Robin (multiple inputs on same video device name)
############################################################

# Number of frames to capture in each roundrobin step (default: 1)
roundrobin_frames 1

# Number of frames to skip before each roundrobin step (default: 1)
roundrobin_skip 1

# Try to filter out noise generated by roundrobin (default: off)
switchfilter off


############################################################
# Motion Detection Settings:
############################################################

# Threshold for number of changed pixels in an image that
# triggers motion detection (default: 1500)
threshold 1500

# Automatically tune the threshold down if possible (default: off)
threshold_tune off

# Noise threshold for the motion detection (default: 32)
noise_level 32

# Automatically tune the noise threshold (default: on)
noise_tune on

# Despeckle motion image using (e)rode or (d)ilate or (l)abel (Default: not defined)
# Recommended value is EedDl. Any combination (and number of) of E, e, d, and D is valid.
# (l)abeling must only be used once and the 'l' must be the last letter.
# Comment out to disable
despeckle EedDl

# Detect motion in predefined areas (1 - 9). Areas are numbered like that:  1 2 3
# A script (on_area_detected) is started immediately when motion is         4 5 6
# detected in one of the given areas, but only once during an event.        7 8 9
# One or more areas can be specified with this option. (Default: not defined)
; area_detect value

# PGM file to use as a sensitivity mask.
# Full path name to. (Default: not defined)
; mask_file value

# Dynamically create a mask file during operation (default: 0)
# Adjust speed of mask changes from 0 (off) to 10 (fast)
smart_mask_speed 0

# Ignore sudden massive light intensity changes given as a percentage of the picture
# area that changed intensity. Valid range: 0 - 100 , default: 0 = disabled
lightswitch 0

# Picture frames must contain motion at least the specified number of frames
# in a row before they are detected as true motion. At the default of 1, all
# motion is detected. Valid range: 1 to thousands, recommended 1-5
minimum_motion_frames 1

# Specifies the number of pre-captured (buffered) pictures from before motion
# was detected that will be output at motion detection.
# Recommended range: 0 to 5 (default: 0)
# Do not use large values! Large values will cause Motion to skip video frames and
# cause unsmooth mpegs. To smooth mpegs use larger values of post_capture instead.
pre_capture 0

# Number of frames to capture after motion is no longer detected (default: 0)
post_capture 0

# Gap is the seconds of no motion detection that triggers the end of an event
# An event is defined as a series of motion images taken within a short timeframe.
# Recommended value is 60 seconds (Default). The value 0 is allowed and disables
# events causing all Motion to be written to one single mpeg file and no pre_capture.
gap 60

# Maximum length in seconds of an mpeg movie
# When value is exceeded a new mpeg file is created. (Default: 0 = infinite)
max_mpeg_time 0

# Always save images even if there was no motion (default: off)
output_all off


############################################################
# Image File Output
############################################################

# Output 'normal' pictures when motion is detected (default: on)
# Valid values: on, off, first, best, center
# When set to 'first', only the first picture of an event is saved.
# Picture with most motion of an event is saved when set to 'best'.
# Picture with motion nearest center of picture is saved when set to 'center'.
# Can be used as preview shot for the corresponding movie.
output_normal on

# Output pictures with only the pixels moving object (ghost images) (default: off)
output_motion off

# The quality (in percent) to be used by the jpeg compression (default: 75)
quality 96

# Output ppm images instead of jpeg (default: off)
ppm off


############################################################
# FFMPEG related options
# Film (mpeg) file output, and deinterlacing of the video input
# The options movie_filename and timelapse_filename are also used
# by the ffmpeg feature
############################################################

# Use ffmpeg to encode mpeg movies in realtime (default: off)
ffmpeg_cap_new off

# Use ffmpeg to make movies with only the pixels moving
# object (ghost images) (default: off)
ffmpeg_cap_motion on

# Use ffmpeg to encode a timelapse movie
# Default value 0 = off - else save frame every Nth second
ffmpeg_timelapse 10

# The file rollover mode of the timelapse video
# Valid values: hourly, daily (default), weekly-sunday, weekly-monday, monthly, manual
ffmpeg_timelapse_mode daily

# Bitrate to be used by the ffmpeg encoder (default: 400000)
# This option is ignored if ffmpeg_variable_bitrate is not 0 (disabled)
ffmpeg_bps 3000000

# Enables and defines variable bitrate for the ffmpeg encoder.
# ffmpeg_bps is ignored if variable bitrate is enabled.
# Valid values: 0 (default) = fixed bitrate defined by ffmpeg_bps,
# or the range 2 - 31 where 2 means best quality and 31 is worst.
ffmpeg_variable_bitrate 0

# Codec to used by ffmpeg for the video compression.
# Timelapse mpegs are always made in mpeg1 format independent from this option.
# Supported formats are: mpeg1 (ffmpeg-0.4.8 only), mpeg4 (default), and msmpeg4.
# mpeg1 - gives you files with extension .mpg
# mpeg4 or msmpeg4 - gives you files with extension .avi
# msmpeg4 is recommended for use with Windows Media Player because
# it requires no installation of codec on the Windows client.
# swf - gives you a flash film with extension .swf
# flv - gives you a flash video with extension .flv
# ffv1 - FF video codec 1 for Lossless Encoding ( experimental )
# mov - QuickTime ( testing )
ffmpeg_video_codec mpeg4

# Use ffmpeg to deinterlace video. Necessary if you use an analog camera
# and see horizontal combing on moving objects in video or pictures.
# (default: off)
ffmpeg_deinterlace off


############################################################
# Snapshots (Traditional Periodic Webcam File Output)
############################################################

# Make automated snapshot every N seconds (default: 0 = disabled)
snapshot_interval 0


############################################################
# Text Display
# %Y = year, %m = month, %d = date,
# %H = hour, %M = minute, %S = second, %T = HH:MM:SS,
# %v = event, %q = frame number, %t = thread (camera) number,
# %D = changed pixels, %N = noise level, \n = new line,
# %i and %J = width and height of motion area,
# %K and %L = X and Y coordinates of motion center
# %C = value defined by text_event - do not use with text_event!
# You can put quotation marks around the text to allow
# leading spaces
############################################################

# Locate and draw a box around the moving object.
# Valid values: on, off and preview (default: off)
# Set to 'preview' will only draw a box in preview_shot pictures.
locate off

# Draws the timestamp using same options as C function strftime(3)
# Default: %Y-%m-%d\n%T = date in ISO format and time in 24 hour clock
# Text is placed in lower right corner
text_right %Y-%m-%d\n%T-%q

# Draw a user defined text on the images using same options as C function strftime(3)
# Default: Not defined = no text
# Text is placed in lower left corner
; text_left value

# Draw the number of changed pixed on the images (default: off)
# Will normally be set to off except when you setup and adjust the motion settings
# Text is placed in upper right corner
text_changes off

# This option defines the value of the special event conversion specifier %C
# You can use any conversion specifier in this option except %C. Date and time
# values are from the timestamp of the first image in the current event.
# Default: %Y%m%d%H%M%S
# The idea is that %C can be used filenames and text_left/right for creating
# a unique identifier for each event.
text_event %Y%m%d%H%M%S

# Draw characters at twice normal size on images. (default: off)
text_double off


############################################################
# Target Directories and filenames For Images And Films
# For the options snapshot_, jpeg_, mpeg_ and timelapse_filename
# you can use conversion specifiers
# %Y = year, %m = month, %d = date,
# %H = hour, %M = minute, %S = second,
# %v = event, %q = frame number, %t = thread (camera) number,
# %D = changed pixels, %N = noise level,
# %i and %J = width and height of motion area,
# %K and %L = X and Y coordinates of motion center
# %C = value defined by text_event
# Quotation marks round string are allowed.
############################################################

# Target base directory for pictures and films
# Recommended to use absolute path. (Default: current working directory)
target_dir /media/data/capt

# File path for snapshots (jpeg or ppm) relative to target_dir
# Default: %v-%Y%m%d%H%M%S-snapshot
# Default value is equivalent to legacy oldlayout option
# For Motion 3.0 compatible mode choose: %Y/%m/%d/%H/%M/%S-snapshot
# File extension .jpg or .ppm is automatically added so do not include this.
# Note: A symbolic link called lastsnap.jpg created in the target_dir will always
# point to the latest snapshot, unless snapshot_filename is exactly 'lastsnap'
snapshot_filename %v-%Y%m%d%H%M%S-snapshot

# File path for motion triggered images (jpeg or ppm) relative to target_dir
# Default: %v-%Y%m%d%H%M%S-%q
# Default value is equivalent to legacy oldlayout option
# For Motion 3.0 compatible mode choose: %Y/%m/%d/%H/%M/%S-%q
# File extension .jpg or .ppm is automatically added so do not include this
# Set to 'preview' together with best-preview feature enables special naming
# convention for preview shots. See motion guide for details
jpeg_filename %v-%Y%m%d%H%M%S-%q

# File path for motion triggered ffmpeg films (mpeg) relative to target_dir
# Default: %v-%Y%m%d%H%M%S
# Default value is equivalent to legacy oldlayout option
# For Motion 3.0 compatible mode choose: %Y/%m/%d/%H%M%S
# File extension .mpg or .avi is automatically added so do not include this
# This option was previously called ffmpeg_filename
movie_filename %v-%Y%m%d%H%M%S

# File path for timelapse mpegs relative to target_dir
# Default: %Y%m%d-timelapse
# Default value is near equivalent to legacy oldlayout option
# For Motion 3.0 compatible mode choose: %Y/%m/%d-timelapse
# File extension .mpg is automatically added so do not include this
timelapse_filename %Y%m%d-timelapse


############################################################
# Live Webcam Server
############################################################

# The mini-http server listens to this port for requests (default: 0 = disabled)
webcam_port 8082

# Quality of the jpeg images produced (default: 50)
webcam_quality 95

# Output frames at 1 fps when no motion is detected and increase to the
# rate given by webcam_maxrate when motion is detected (default: off)
webcam_motion off

# Maximum framerate for webcam streams (default: 1)
webcam_maxrate 1

# Restrict webcam connections to localhost only (default: on)
webcam_localhost on

# Limits the number of images per connection (default: 0 = unlimited)
# Number can be defined by multiplying actual webcam rate by desired number of seconds
# Actual webcam rate is the smallest of the numbers framerate and webcam_maxrate
webcam_limit 0


############################################################
# HTTP Based Control
############################################################

# TCP/IP port for the http server to listen on (default: 0 = disabled)
control_port 8081

# Restrict control connections to localhost only (default: on)
control_localhost off

# Output for http server, select off to choose raw text plain (default: on)
control_html_output on

# Authentication for the http based control. Syntax username:password
# Default: not defined (Disabled)
control_authentication doka:pervix


############################################################
# Tracking (Pan/Tilt)
############################################################

# Type of tracker (0=none (default), 1=stepper, 2=iomojo, 3=pwc, 4=generic, 5=uvcvideo)
# The generic type enables the definition of motion center and motion size to
# be used with the conversion specifiers for options like on_motion_detected
track_type 0

# Enable auto tracking (default: off)
track_auto off

# Serial port of motor (default: none)
; track_port value

# Motor number for x-axis (default: 0)
track_motorx 0

# Motor number for y-axis (default: 0)
track_motory 0

# Maximum value on x-axis (default: 0)
track_maxx 0

# Maximum value on y-axis (default: 0)
track_maxy 0

# ID of an iomojo camera if used (default: 0)
track_iomojo_id 0

# Angle in degrees the camera moves per step on the X-axis
# with auto-track (default: 10)
# Currently only used with pwc type cameras
track_step_angle_x 10

# Angle in degrees the camera moves per step on the Y-axis
# with auto-track (default: 10)
# Currently only used with pwc type cameras
track_step_angle_y 10

# Delay to wait for after tracking movement as number
# of picture frames (default: 10)
track_move_wait 10

# Speed to set the motor to (stepper motor option) (default: 255)
track_speed 255

# Number of steps to make (stepper motor option) (default: 40)
track_stepsize 40


############################################################
# External Commands, Warnings and Logging:
# You can use conversion specifiers for the on_xxxx commands
# %Y = year, %m = month, %d = date,
# %H = hour, %M = minute, %S = second,
# %v = event, %q = frame number, %t = thread (camera) number,
# %D = changed pixels, %N = noise level,
# %i and %J = width and height of motion area,
# %K and %L = X and Y coordinates of motion center
# %C = value defined by text_event
# %f = filename with full path
# %n = number indicating filetype
# Both %f and %n are only defined for on_picture_save,
# on_movie_start and on_movie_end
# Quotation marks round string are allowed.
############################################################

# Do not sound beeps when detecting motion (default: on)
# Note: Motion never beeps when running in daemon mode.
quiet on

# Command to be executed when an event starts. (default: none)
# An event starts at first motion detected after a period of no motion defined by gap
; on_event_start value

# Command to be executed when an event ends after a period of no motion
# (default: none). The period of no motion is defined by option gap.
; on_event_end value

# Command to be executed when a picture (.ppm|.jpg) is saved (default: none)
# To give the filename as an argument to a command append it with %f
; on_picture_save value

# Command to be executed when a motion frame is detected (default: none)
; on_motion_detected value

# Command to be executed when motion in a predefined area is detected
# Check option 'area_detect'. (default: none)
; on_area_detected value

# Command to be executed when a movie file (.mpg|.avi) is created. (default: none)
# To give the filename as an argument to a command append it with %f
; on_movie_start value

# Command to be executed when a movie file (.mpg|.avi) is closed. (default: none)
# To give the filename as an argument to a command append it with %f
; on_movie_end value

# Command to be executed when a camera can't be opened or if it is lost
# NOTE: There is situations when motion doesn't detect a lost camera!
# It depends on the driver, some drivers don't detect a lost camera at all
# Some hang the motion thread. Some even hang the PC! (default: none)
; on_camera_lost value


############################################################
# Common Options For MySQL and PostgreSQL database features.
# Options require the MySQL/PostgreSQL options to be active also.
############################################################

# Log to the database when creating motion triggered image file  (default: on)
sql_log_image on

# Log to the database when creating a snapshot image file (default: on)
sql_log_snapshot on

# Log to the database when creating motion triggered mpeg file (default: off)
sql_log_mpeg off

# Log to the database when creating timelapse mpeg file (default: off)
sql_log_timelapse off

# SQL query string that is sent to the database
# Use same conversion specifiers has for text features
# Additional special conversion specifiers are
# %n = the number representing the file_type
# %f = filename with full path
# Default value:
# insert into security(camera, filename, frame, file_type, time_stamp, text_event) values('%t', '%f', '%q', '%n', '%Y-%m-%d %T', '%C')
sql_query insert into security(camera, filename, frame, file_type, time_stamp, event_time_stamp) values('%t', '%f', '%q', '%n', '%Y-%m-%d %T', '%C')


############################################################
# Database Options For MySQL
############################################################

# Mysql database to log to (default: not defined)
; mysql_db value

# The host on which the database is located (default: localhost)
mysql_host localhost

# User account name for MySQL database (default: not defined)
; mysql_user value

# User password for MySQL database (default: not defined)
; mysql_password value


############################################################
# Database Options For PostgreSQL
############################################################

# PostgreSQL database to log to (default: not defined)
; pgsql_db value

# The host on which the database is located (default: localhost)
pgsql_host localhost

# User account name for PostgreSQL database (default: not defined)
; pgsql_user value

# User password for PostgreSQL database (default: not defined)
; pgsql_password value

# Port on which the PostgreSQL database is located (default: 5432)
pgsql_port 5432


############################################################
# Video Loopback Device (vloopback project)
############################################################

# Output images to a video4linux loopback device
# The value '-' means next available (default: not defined)
; video_pipe value

# Output motion images to a video4linux loopback device
# The value '-' means next available (default: not defined)
; motion_video_pipe value


##############################################################
# Thread config files - One for each camera.
# Except if only one camera - You only need this config file.
# If you have more than one camera you MUST define one thread
# config file for each camera in addition to this config file.
##############################################################


; thread /usr/local/etc/thread1.conf

#13 Autres » Lire une fat linux ext4 crypté sur OS windows » 13-11-2019 21:16:46

sizy458
Réponses : 0
Bonjour,

J'ai une clé usb formatté en ext4 avec enc2fs ,c'est à dire crypter.

Je voudrais y accéder en lecteur seule (lecture ecriture si possible) sur Windows 7 , sachant que je connais le mot de passe.

Merci beaucoup.

#14 Re : Matériel » Probléme graphique aléatoire » 08-11-2019 15:49:46

Probléme non résolut , je tourne en mode standard vga avec mode nouveau blacklister.

Si j'installe le dernier driver 440.31 du 04/11/2019 , est que cela va marcher ?
je veux dire résoudre le probléme de https://debian-facile.org/viewtopic.php … 33#p315433

Merci.

#15 Re : Matériel » Probléme graphique aléatoire » 04-11-2019 22:59:26

J'ai oublier de dire que la carte nvidia est intégré à la carte mére.

#16 Re : Matériel » Probléme graphique aléatoire » 04-11-2019 22:50:13

J'ai desinstaller tout nvidia
Le gnome fonctionne bien mais limiter à 1024x768.

J'ai installer nvidia-driver de gestionnaire synaptics , le X ne demarre pas du tout !
j'ai un genre d'écran gris avec un texte et un bouton fermer la session.

En mode rescue J'ai fait un apt-get remove nvidia-* , et tout fonctionne mais en mode vesa et graphique limiter.

Probléme toujours pas résolut.

#17 Re : Matériel » Probléme graphique aléatoire » 04-11-2019 22:25:27

En desinstallant le driver propriétaire, plus de bug,mais video standard
et grep me donne :


og
[    20.709] (II) Module nouveau: vendor="X.Org Foundation"
[    20.709]  compiled for 1.19.3, module version = 1.0.13
[    20.710]  Module class: X.Org Video Driver
--
[    20.728] (II) Module modesetting: vendor="X.Org Foundation"
[    20.728]  compiled for 1.19.2, module version = 1.19.2
[    20.728]  Module class: X.Org Video Driver
--
[    20.735] (II) Module fbdev: vendor="X.Org Foundation"
[    20.735]  compiled for 1.19.0, module version = 0.4.4
[    20.735]  Module class: X.Org Video Driver
--
[    20.749] (II) Module vesa: vendor="X.Org Foundation"
[    20.749]  compiled for 1.19.0, module version = 2.3.4
[    20.750]  Module class: X.Org Video Driver
user@multimedia:~$

 

#18 Matériel » Mode vga » 04-11-2019 20:56:19

sizy458
Réponses : 0
Bonjour,

Je posséde une carte graphique 'GeForce 6150SE nForce 430' et les drivers nvidia sont buggé pour
cette carte graphique 'GeForce 6150SE nForce 430' ,

je vais donc installer que les drivers VGA,VESA.
D'aprés moi : Je n'aurais pas la 3d,opengl (j'en ai pas besoin), un seul écran (je n'ai qu'un écran) , bref...

Est t'il possible d'activer le mode graphique truecolor supérieur à 1024x768 ?
Est ce que je pourrais lire un divx,video sur le mode vga truecolor ????
Si non comment faire ??
Comment optimiser ?

Merci

#19 Re : Matériel » Probléme graphique aléatoire » 04-11-2019 20:01:00

J'ai deinstaller les drivers nvidia et blacklister le pilote nouveau.
J'ai installer que le nvidia propriétaire 'NVIDIA-Linux-x86_64-304.137.run' ,et c'est bien pire et une horreur !
une horreur !

J'ai donc le session login mot de passe,
je peux me logger mais ca bug , je ne peux strictement rien faire !
pas possible d’exécuter quoi que ce soit le terminal,firefox etc .....



J'ai que le mode genre mono-fenetrage , bug logout fermeture de session ,  je ne peux strictement rien faire !.
Je m'explique j'execute par exemple le terminal , le terminal s'affiche  , mais aprés écran noir avec le terminal ,
le clavier répond pas , je dois soit attendre que le logout se fasse automatiquement ou je dois redemarrer la machine.
CTRL-ALT-F1 répond et je peux me éteindre proprement ma machine.
Si j'execute par exemple gestionnaire de fichier, et je verrais un ecran noir avec le gestionnaire de fichier.


J'ai essayer gnome classique et gnome normal et le X11, même probléme , je ne prend même la peine de tester le mode plasma !

Conclusion  j'ai exactement le même problème  mais en pire !
Donc driver nvidia tous buggés pour cette carte graphique 'GeForce 6150SE nForce 430' ! je suis déçu.
, les développeurs de ces drivers n'ont pas tester pour cette carte graphique 'GeForce 6150SE nForce 430'.

J'ai pu me débrouiller pour recupérer l'information ci -dessous avec une autre machine par clé usb


grep -B2 'Module class: X.Org Video Driver' /var/log/Xorg.0.log





[    27.149] (II) Module nvidia: vendor="NVIDIA Corporation"
[    27.149]  compiled for 4.0.2, module version = 1.0.0
[    27.149]  Module class: X.Org Video Driver
 



Le paquet 'xserver-xorg-video-nvidia' n'est pas installé , est ce que je dois l'installer ?

J'ai vérifier en bootant sur cette machine un Windows XP  ,j'ai bien une NVIDIA et non une ATI.

#20 Re : Matériel » Probléme graphique aléatoire » 04-11-2019 18:18:11

J'ai suivie le lien https://debian-facile.org/doc:materiel: … ia:accueil
Tout flinguer !
Bon à reinstaller et
en plus probléme  non résolut  !

Un message de session 'quelque chose s'est mal passer' avec un bouton 'fermer la session' et demerde toi !

voici le log xorg.0.log


[   516.788]
X.Org X Server 1.19.2
Release Date: 2017-03-02
[   516.789] X Protocol Version 11, Revision 0
[   516.789] Build Operating System: Linux 4.9.0-8-amd64 x86_64 Debian
[   516.789] Current Operating System: Linux multimedia 4.9.0-11-amd64 #1 SMP Debian 4.9.189-3+deb9u1 (2019-09-20) x86_64
[   516.789] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-11-amd64 root=UUID=8616a031-cb50-4a6d-8503-ca861d8e747b ro single
[   516.790] Build Date: 03 November 2018  03:09:11AM
[   516.790] xorg-server 2:1.19.2-1+deb9u5 (https://www.debian.org/support)
[   516.790] Current version of pixman: 0.34.0
[   516.790]  Before reporting problems, check http://wiki.x.org
  to make sure that you have the latest version.
[   516.790] Markers: (--) probed, (**) from config file, (==) default setting,
  (++) from command line, (!!) notice, (II) informational,
  (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   516.792] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Nov  4 18:25:13 2019
[   516.792] (==) Using config file: "/etc/X11/xorg.conf"
[   516.792] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   516.793] (==) No Layout section.  Using the first Screen section.
[   516.793] (==) No screen section available. Using defaults.
[   516.793] (**) |-->Screen "Default Screen Section" (0)
[   516.793] (**) |   |-->Monitor "<default monitor>"
[   516.793] (==) No device specified for screen "Default Screen Section".
  Using the first device section listed.
[   516.793] (**) |   |-->Device "Video Card"
[   516.793] (==) No monitor specified for screen "Default Screen Section".
  Using a default monitor configuration.
[   516.793] (==) Automatically adding devices
[   516.793] (==) Automatically enabling devices
[   516.793] (==) Automatically adding GPU devices
[   516.793] (==) Max clients allowed: 256, resource mask: 0x1fffff
[   516.794] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[   516.794]  Entry deleted from font path.
[   516.794] (==) FontPath set to:
  /usr/share/fonts/X11/misc,
  /usr/share/fonts/X11/100dpi/:unscaled,
  /usr/share/fonts/X11/75dpi/:unscaled,
  /usr/share/fonts/X11/Type1,
  /usr/share/fonts/X11/100dpi,
  /usr/share/fonts/X11/75dpi,
  built-ins
[   516.794] (**) ModulePath set to "/usr/lib/xorg/modules/linux,/usr/lib/xorg/modules"
[   516.794] (II) The server relies on udev to provide the list of input devices.
  If no devices become available, reconfigure udev or disable AutoAddDevices.
[   516.794] (II) Loader magic: 0x55a163655e00
[   516.794] (II) Module ABI versions:
[   516.794]  X.Org ANSI C Emulation: 0.4
[   516.794]  X.Org Video Driver: 23.0
[   516.794]  X.Org XInput driver : 24.1
[   516.794]  X.Org Server Extension : 10.0
[   516.794] (EE) dbus-core: error connecting to system bus: org.freedesktop.DBus.Error.FileNotFound (Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory)
[   516.794] (++) using VT number 1

[   516.796] (--) PCI:*(0:0:13:0) 10de:03d0:1025:0394 rev 162, Mem @ 0xfb000000/16777216, 0xe0000000/268435456, 0xfa000000/16777216, BIOS @ 0x????????/131072
[   516.796] (II) LoadModule: "glx"
[   516.797] (II) Loading /usr/lib/xorg/modules/linux/libglx.so
[   516.805] (II) Module glx: vendor="NVIDIA Corporation"
[   516.805]  compiled for 4.0.2, module version = 1.0.0
[   516.805]  Module class: X.Org Server Extension
[   516.805] (II) NVIDIA GLX Module  390.116  Sun Jan 27 06:24:32 PST 2019
[   516.805] (II) LoadModule: "nvidia"
[   516.805] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[   516.863] (II) Module nvidia: vendor="NVIDIA Corporation"
[   516.863]  compiled for 4.0.2, module version = 1.0.0
[   516.863]  Module class: X.Org Video Driver
[   516.872] (II) NVIDIA dlloader X Driver  390.116  Sun Jan 27 05:57:42 PST 2019
[   516.872] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[   516.884] (II) Loading sub module "fb"
[   516.884] (II) LoadModule: "fb"
[   516.884] (II) Loading /usr/lib/xorg/modules/libfb.so
[   516.884] (II) Module fb: vendor="X.Org Foundation"
[   516.884]  compiled for 1.19.2, module version = 1.0.0
[   516.884]  ABI class: X.Org ANSI C Emulation, version 0.4
[   516.884] (II) Loading sub module "wfb"
[   516.885] (II) LoadModule: "wfb"
[   516.885] (II) Loading /usr/lib/xorg/modules/libwfb.so
[   516.895] (II) Module wfb: vendor="X.Org Foundation"
[   516.895]  compiled for 1.19.2, module version = 1.0.0
[   516.895]  ABI class: X.Org ANSI C Emulation, version 0.4
[   516.896] (II) Loading sub module "ramdac"
[   516.896] (II) LoadModule: "ramdac"
[   516.896] (II) Module "ramdac" already built-in
[   516.897] (WW) NVIDIA(0): The NVIDIA GeForce 6150SE nForce 430 GPU installed in this
[   516.897] (WW) NVIDIA(0):     system is supported through the NVIDIA 304.xx Legacy
[   516.897] (WW) NVIDIA(0):     drivers. Please visit
[   516.897] (WW) NVIDIA(0):     http://www.nvidia.com/object/unix.html for more
[   516.897] (WW) NVIDIA(0):     information.  The 390.116 NVIDIA driver will ignore this
[   516.897] (WW) NVIDIA(0):     GPU.  Continuing probe...
[   516.897] (EE) No devices detected.
[   516.897] (EE)
Fatal server error:
[   516.897] (EE) no screens found(EE)
[   516.897] (EE)
Please consult the The X.Org Foundation support
   at http://wiki.x.org
 for help.
[   516.897] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[   516.898] (EE)
[   516.899] (EE) Server terminated with error (1). Closing log file.
 

#21 Re : Matériel » Probléme graphique aléatoire » 03-11-2019 22:10:36

Voici:


root@multimedia:/home/user# cat /var/log/syslog | tail -n 100
Nov  3 22:05:56 multimedia smbd[1468]: [2019/11/03 22:05:56.045072,  0] ../lib/param/loadparm.c:1750(lpcfg_do_service_parameter)
Nov  3 22:05:56 multimedia smbd[1468]:   Ignoring unknown parameter "inherit permission"
Nov  3 22:05:56 multimedia smbd[1468]: [2019/11/03 22:05:56.045164,  0] ../lib/param/loadparm.c:772(lpcfg_map_parameter)
Nov  3 22:05:56 multimedia smbd[1468]:   Unknown parameter encountered: "share modes"
Nov  3 22:05:56 multimedia smbd[1468]: [2019/11/03 22:05:56.045183,  0] ../lib/param/loadparm.c:1750(lpcfg_do_service_parameter)
Nov  3 22:05:56 multimedia smbd[1468]:   Ignoring unknown parameter "share modes"
Nov  3 22:05:56 multimedia smbd[1468]: [2019/11/03 22:05:56.045213,  0] ../lib/param/loadparm.c:772(lpcfg_map_parameter)
Nov  3 22:05:56 multimedia smbd[1468]:   Unknown parameter encountered: "inherit permission"
Nov  3 22:05:56 multimedia smbd[1468]: [2019/11/03 22:05:56.045230,  0] ../lib/param/loadparm.c:1750(lpcfg_do_service_parameter)
Nov  3 22:05:56 multimedia smbd[1468]:   Ignoring unknown parameter "inherit permission"
Nov  3 22:05:56 multimedia smbd[1468]: [2019/11/03 22:05:56.045322,  0] ../lib/param/loadparm.c:772(lpcfg_map_parameter)
Nov  3 22:05:56 multimedia smbd[1468]:   Unknown parameter encountered: "share modes"
Nov  3 22:05:56 multimedia smbd[1468]: [2019/11/03 22:05:56.045340,  0] ../lib/param/loadparm.c:1750(lpcfg_do_service_parameter)
Nov  3 22:05:56 multimedia smbd[1468]:   Ignoring unknown parameter "share modes"
Nov  3 22:05:56 multimedia smbd[1468]: [2019/11/03 22:05:56.045383,  0] ../lib/param/loadparm.c:772(lpcfg_map_parameter)
Nov  3 22:05:56 multimedia smbd[1468]:   Unknown parameter encountered: "inherit permission"
Nov  3 22:05:56 multimedia smbd[1468]: [2019/11/03 22:05:56.045401,  0] ../lib/param/loadparm.c:1750(lpcfg_do_service_parameter)
Nov  3 22:05:56 multimedia smbd[1468]:   Ignoring unknown parameter "inherit permission"
Nov  3 22:05:56 multimedia smbd[1468]: [2019/11/03 22:05:56.045495,  0] ../lib/param/loadparm.c:772(lpcfg_map_parameter)
Nov  3 22:05:56 multimedia smbd[1468]:   Unknown parameter encountered: "share modes"
Nov  3 22:05:56 multimedia smbd[1468]: [2019/11/03 22:05:56.045514,  0] ../lib/param/loadparm.c:1750(lpcfg_do_service_parameter)
Nov  3 22:05:56 multimedia smbd[1468]:   Ignoring unknown parameter "share modes"
Nov  3 22:05:56 multimedia smbd[1468]: [2019/11/03 22:05:56.055606,  0] ../source3/smbd/service.c:755(make_connection_snum)
Nov  3 22:05:56 multimedia smbd[1468]:   canonicalize_connect_path failed for service multimediarw, path /media/data
Nov  3 22:06:02 multimedia smbd[1470]: [2019/11/03 22:06:02.217878,  0] ../lib/param/loadparm.c:772(lpcfg_map_parameter)
Nov  3 22:06:02 multimedia smbd[1470]:   Unknown parameter encountered: "share modes"
Nov  3 22:06:02 multimedia smbd[1470]: [2019/11/03 22:06:02.218056,  0] ../lib/param/loadparm.c:1750(lpcfg_do_service_parameter)
Nov  3 22:06:02 multimedia smbd[1470]:   Ignoring unknown parameter "share modes"
Nov  3 22:06:02 multimedia smbd[1470]: [2019/11/03 22:06:02.218173,  0] ../lib/param/loadparm.c:772(lpcfg_map_parameter)
Nov  3 22:06:02 multimedia smbd[1470]:   Unknown parameter encountered: "inherit permission"
Nov  3 22:06:02 multimedia smbd[1470]: [2019/11/03 22:06:02.218237,  0] ../lib/param/loadparm.c:1750(lpcfg_do_service_parameter)
Nov  3 22:06:02 multimedia smbd[1470]:   Ignoring unknown parameter "inherit permission"
Nov  3 22:06:02 multimedia smbd[1470]: [2019/11/03 22:06:02.218603,  0] ../lib/param/loadparm.c:772(lpcfg_map_parameter)
Nov  3 22:06:02 multimedia smbd[1470]:   Unknown parameter encountered: "share modes"
Nov  3 22:06:02 multimedia smbd[1470]: [2019/11/03 22:06:02.218670,  0] ../lib/param/loadparm.c:1750(lpcfg_do_service_parameter)
Nov  3 22:06:02 multimedia smbd[1470]:   Ignoring unknown parameter "share modes"
Nov  3 22:06:02 multimedia smbd[1470]: [2019/11/03 22:06:02.218776,  0] ../lib/param/loadparm.c:772(lpcfg_map_parameter)
Nov  3 22:06:02 multimedia smbd[1470]:   Unknown parameter encountered: "inherit permission"
Nov  3 22:06:02 multimedia smbd[1470]: [2019/11/03 22:06:02.218836,  0] ../lib/param/loadparm.c:1750(lpcfg_do_service_parameter)
Nov  3 22:06:02 multimedia smbd[1470]:   Ignoring unknown parameter "inherit permission"
Nov  3 22:06:02 multimedia smbd[1470]: [2019/11/03 22:06:02.219158,  0] ../lib/param/loadparm.c:772(lpcfg_map_parameter)
Nov  3 22:06:02 multimedia smbd[1470]:   Unknown parameter encountered: "share modes"
Nov  3 22:06:02 multimedia smbd[1470]: [2019/11/03 22:06:02.219221,  0] ../lib/param/loadparm.c:1750(lpcfg_do_service_parameter)
Nov  3 22:06:02 multimedia smbd[1470]:   Ignoring unknown parameter "share modes"
Nov  3 22:06:02 multimedia smbd[1470]: [2019/11/03 22:06:02.219326,  0] ../lib/param/loadparm.c:772(lpcfg_map_parameter)
Nov  3 22:06:02 multimedia smbd[1470]:   Unknown parameter encountered: "inherit permission"
Nov  3 22:06:02 multimedia smbd[1470]: [2019/11/03 22:06:02.219386,  0] ../lib/param/loadparm.c:1750(lpcfg_do_service_parameter)
Nov  3 22:06:02 multimedia smbd[1470]:   Ignoring unknown parameter "inherit permission"
Nov  3 22:06:02 multimedia smbd[1470]: [2019/11/03 22:06:02.219705,  0] ../lib/param/loadparm.c:772(lpcfg_map_parameter)
Nov  3 22:06:02 multimedia smbd[1470]:   Unknown parameter encountered: "share modes"
Nov  3 22:06:02 multimedia smbd[1470]: [2019/11/03 22:06:02.219768,  0] ../lib/param/loadparm.c:1750(lpcfg_do_service_parameter)
Nov  3 22:06:02 multimedia smbd[1470]:   Ignoring unknown parameter "share modes"
Nov  3 22:06:02 multimedia smbd[1470]: [2019/11/03 22:06:02.219913,  0] ../lib/param/loadparm.c:772(lpcfg_map_parameter)
Nov  3 22:06:02 multimedia smbd[1470]:   Unknown parameter encountered: "inherit permission"
Nov  3 22:06:02 multimedia smbd[1470]: [2019/11/03 22:06:02.219974,  0] ../lib/param/loadparm.c:1750(lpcfg_do_service_parameter)
Nov  3 22:06:02 multimedia smbd[1470]:   Ignoring unknown parameter "inherit permission"
Nov  3 22:06:02 multimedia smbd[1470]: [2019/11/03 22:06:02.220299,  0] ../lib/param/loadparm.c:772(lpcfg_map_parameter)
Nov  3 22:06:02 multimedia smbd[1470]:   Unknown parameter encountered: "share modes"
Nov  3 22:06:02 multimedia smbd[1470]: [2019/11/03 22:06:02.220367,  0] ../lib/param/loadparm.c:1750(lpcfg_do_service_parameter)
Nov  3 22:06:02 multimedia smbd[1470]:   Ignoring unknown parameter "share modes"
Nov  3 22:06:02 multimedia smbd[1470]: [2019/11/03 22:06:02.235819,  0] ../source3/smbd/service.c:755(make_connection_snum)
Nov  3 22:06:02 multimedia smbd[1470]:   canonicalize_connect_path failed for service multimediarw, path /media/data
Nov  3 22:06:58 multimedia gnome-software-service.desktop[1280]: 21:06:58:0623 Gs  no app for changed apps-menu@gnome-shell-extensions.gcampax.github.com
Nov  3 22:06:58 multimedia dbus[459]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service'
Nov  3 22:06:58 multimedia gnome-software-service.desktop[1280]: 21:06:58:0662 Gs  no app for changed places-menu@gnome-shell-extensions.gcampax.github.com
Nov  3 22:06:58 multimedia gnome-software-service.desktop[1280]: 21:06:58:0665 Gs  no app for changed alternate-tab@gnome-shell-extensions.gcampax.github.com
Nov  3 22:06:58 multimedia gnome-software-service.desktop[1280]: 21:06:58:0667 Gs  no app for changed launch-new-instance@gnome-shell-extensions.gcampax.github.com
Nov  3 22:06:58 multimedia systemd[1]: Starting Hostname Service...
Nov  3 22:06:58 multimedia gnome-software-service.desktop[1280]: 21:06:58:0705 Gs  no app for changed window-list@gnome-shell-extensions.gcampax.github.com
Nov  3 22:06:58 multimedia gnome-software-service.desktop[1280]: 21:06:58:0708 Gs  no app for changed hibernate-status@dromi
Nov  3 22:06:58 multimedia dbus[459]: [system] Successfully activated service 'org.freedesktop.hostname1'
Nov  3 22:06:58 multimedia systemd[1]: Started Hostname Service.
Nov  3 22:07:04 multimedia kernel: [  840.643334] nouveau 0000:00:0d.0: bus: MMIO write of 052f0001 FAULT at 00b030
Nov  3 22:07:04 multimedia kernel: [  840.700554] nouveau 0000:00:0d.0: bus: MMIO write of 00000000 FAULT at 00b030
Nov  3 22:07:08 multimedia firefox-esr[1504]: Theme parsing error: <data>:1:34: Expected ')' in color definition
Nov  3 22:07:08 multimedia firefox-esr[1504]: Theme parsing error: <data>:1:77: Expected ')' in color definition
Nov  3 22:07:18 multimedia dbus-daemon[1039]: Activating service name='org.gnome.ChromeGnomeShell'
Nov  3 22:07:18 multimedia dbus-daemon[1039]: Successfully activated service 'org.gnome.ChromeGnomeShell'
Nov  3 22:07:57 multimedia dbus-daemon[1039]: Activating via systemd: service name='org.gnome.Terminal' unit='gnome-terminal-server.service'
Nov  3 22:07:57 multimedia systemd[1022]: Starting GNOME Terminal Server...
Nov  3 22:07:57 multimedia dbus-daemon[1039]: Successfully activated service 'org.gnome.Terminal'
Nov  3 22:07:57 multimedia systemd[1022]: Started GNOME Terminal Server.
Nov  3 22:08:05 multimedia systemd[1]: Starting Cleanup of Temporary Directories...
Nov  3 22:08:05 multimedia systemd[1]: Created slice User Slice of root.
Nov  3 22:08:05 multimedia systemd[1]: Starting User Manager for UID 0...
Nov  3 22:08:05 multimedia systemd[1]: Started Session 3 of user root.
Nov  3 22:08:06 multimedia systemd[1]: Started Cleanup of Temporary Directories.
Nov  3 22:08:06 multimedia systemd[1702]: Listening on GnuPG cryptographic agent (ssh-agent emulation).
Nov  3 22:08:06 multimedia systemd[1702]: Starting D-Bus User Message Bus Socket.
Nov  3 22:08:06 multimedia systemd[1702]: Reached target Paths.
Nov  3 22:08:06 multimedia systemd[1702]: Reached target Timers.
Nov  3 22:08:06 multimedia systemd[1702]: Listening on GnuPG cryptographic agent (access for web browsers).
Nov  3 22:08:06 multimedia systemd[1702]: Listening on GnuPG cryptographic agent and passphrase cache (restricted).
Nov  3 22:08:06 multimedia systemd[1702]: Listening on GnuPG cryptographic agent and passphrase cache.
Nov  3 22:08:06 multimedia systemd[1702]: Listening on D-Bus User Message Bus Socket.
Nov  3 22:08:06 multimedia systemd[1702]: Reached target Sockets.
Nov  3 22:08:06 multimedia systemd[1702]: Reached target Basic System.
Nov  3 22:08:06 multimedia systemd[1702]: Reached target Default.
Nov  3 22:08:06 multimedia systemd[1702]: Startup finished in 433ms.
Nov  3 22:08:06 multimedia systemd[1]: Started User Manager for UID 0.





root@multimedia:/home/user# dmesg | tail -n 100
[    5.592360] systemd[1]: Listening on udev Control Socket.
[    5.910414] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[    6.185322] systemd-journald[198]: Received request to flush runtime journal from PID 1
[    7.689678] acpi_cpufreq: overriding BIOS provided _PSD data
[    7.872558] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
[    7.872567] ACPI: Power Button [PWRB]
[    7.872741] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[    7.872745] ACPI: Power Button [PWRF]
[    8.012706] sd 2:0:0:0: Attached scsi generic sg0 type 0
[    8.012812] sr 3:0:0:0: Attached scsi generic sg1 type 5
[    8.012911] sd 6:0:0:0: Attached scsi generic sg2 type 0
[    8.013017] sd 6:0:0:1: Attached scsi generic sg3 type 0
[    8.159892] wmi: Mapper loaded
[    8.186790] input: PC Speaker as /devices/platform/pcspkr/input/input7
[    8.211676] [drm] Initialized
[    8.221773] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    8.653714] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22
[    8.653730] snd_hda_intel 0000:00:05.0: Disabling MSI
[    8.665165] ACPI: PCI Interrupt Link [LMC9] enabled at IRQ 21
[    8.665310] nouveau 0000:00:0d.0: NVIDIA C61 (04c000a2)
[    8.676531] nouveau 0000:00:0d.0: bios: version 05.61.32.30.00
[    8.676658] nouveau 0000:00:0d.0: disp: dcb 1 type 4 unknown
[    8.677471] nouveau 0000:00:0d.0: fb: 256 MiB of unknown memory type
[    8.732984] [TTM] Zone  kernel: Available graphics memory: 1896376 kiB
[    8.732988] [TTM] Initializing pool allocator
[    8.733002] [TTM] Initializing DMA pool allocator
[    8.733102] nouveau 0000:00:0d.0: DRM: VRAM: 253 MiB
[    8.733106] nouveau 0000:00:0d.0: DRM: GART: 512 MiB
[    8.733115] nouveau 0000:00:0d.0: DRM: TMDS table version 1.1
[    8.733120] nouveau 0000:00:0d.0: DRM: DCB version 3.0
[    8.733126] nouveau 0000:00:0d.0: DRM: DCB outp 00: 01000310 00000023
[    8.733131] nouveau 0000:00:0d.0: DRM: DCB outp 01: 00110204 942b0003
[    8.733136] nouveau 0000:00:0d.0: DRM: DCB conn 00: 0000
[    8.733140] nouveau 0000:00:0d.0: DRM: DCB conn 01: 1131
[    8.733144] nouveau 0000:00:0d.0: DRM: DCB conn 02: 0110
[    8.733147] nouveau 0000:00:0d.0: DRM: DCB conn 03: 0111
[    8.733151] nouveau 0000:00:0d.0: DRM: DCB conn 04: 0113
[    8.733492] nouveau 0000:00:0d.0: DRM: Saving VGA fonts
[    8.782289] nouveau 0000:00:0d.0: DRM: DCB type 4 not known
[    8.782293] nouveau 0000:00:0d.0: DRM: Unknown-1 has no encoders, removing
[    8.783528] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    8.783529] [drm] Driver supports precise vblank timestamp query.
[    8.786296] nouveau 0000:00:0d.0: DRM: MM: using M2MF for buffer copies
[    8.816849] nouveau 0000:00:0d.0: DRM: allocated 1280x1024 fb: 0x9000, bo ffff9bf6da8dc000
[    8.817214] fbcon: nouveaufb (fb0) is primary device
[    8.935279] Console: switching to colour frame buffer device 160x64
[    8.937596] nouveau 0000:00:0d.0: fb0: nouveaufb frame buffer device
[    8.953075] [drm] Initialized nouveau 1.3.1 20120801 for 0000:00:0d.0 on minor 0
[    9.032205] kvm: Nested Virtualization enabled
[    9.032212] kvm: Nested Paging enabled
[    9.070455] EDAC MC: Ver: 3.0.0
[    9.097395] MCE: In-kernel MCE decoding enabled.
[    9.256404] EDAC amd64: DRAM ECC disabled.
[    9.256416] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[    9.285897] EDAC amd64: DRAM ECC disabled.
[    9.285909] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[    9.777079] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC662 rev1: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[    9.777087] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    9.777092] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    9.777096] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    9.777099] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    9.777104] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[    9.777108] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[    9.777112] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[   10.187566] Adding 2928636k swap on /dev/sda7.  Priority:-1 extents:1 across:2928636k FS
[   11.900491] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:05.0/sound/card0/input8
[   11.901651] input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input9
[   11.901849] input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input10
[   11.902040] input: HDA NVidia Line as /devices/pci0000:00/0000:00:05.0/sound/card0/input11
[   11.902229] input: HDA NVidia Line Out as /devices/pci0000:00/0000:00:05.0/sound/card0/input12
[   11.902415] input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:05.0/sound/card0/input13
[   15.106068] vboxdrv: loading out-of-tree module taints kernel.
[   15.112982] vboxdrv: Found 2 processor cores
[   15.132888] vboxdrv: TSC mode is Invariant, tentative frequency 2812753607 Hz
[   15.132890] vboxdrv: Successfully loaded version 6.0.14 (interface 0x00290008)
[   15.719429] VBoxNetFlt: Successfully started.
[   15.784007] VBoxNetAdp: Successfully started.
[   16.089736] IPv6: ADDRCONF(NETDEV_UP): enp0s7: link is not ready
[   16.090272] forcedeth 0000:00:07.0 enp0s7: MSI enabled
[   16.091047] IPv6: ADDRCONF(NETDEV_UP): enp0s7: link is not ready
[   16.091054] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s7: link becomes ready
[   16.126480] VBoxPciLinuxInit
[   16.272637] vboxpci: IOMMU not found (not registered)
[   41.231122] nouveau 0000:00:0d.0: bus: MMIO write of 023e0001 FAULT at 00b000
[   42.607220] nouveau 0000:00:0d.0: bus: MMIO write of 026e0001 FAULT at 00b010
[   42.609439] nouveau 0000:00:0d.0: bus: MMIO write of 02700001 FAULT at 00b020
[   43.096287] nouveau 0000:00:0d.0: bus: MMIO write of 00000000 FAULT at 00b020
[   43.096571] nouveau 0000:00:0d.0: bus: MMIO write of 026e0001 FAULT at 00b010
[   44.120797] nouveau 0000:00:0d.0: bus: MMIO write of 026e0001 FAULT at 00b010
[   44.122410] nouveau 0000:00:0d.0: bus: MMIO write of 026e0001 FAULT at 00b010
[   44.307878] nouveau 0000:00:0d.0: bus: MMIO write of 026f0001 FAULT at 00b020
[   44.315360] fuse init (API version 7.26)
[   44.721415] nouveau 0000:00:0d.0: bus: MMIO write of 00000000 FAULT at 00b000
[   51.346441] nouveau 0000:00:0d.0: bus: MMIO write of 03270001 FAULT at 00b000
[  840.643334] nouveau 0000:00:0d.0: bus: MMIO write of 052f0001 FAULT at 00b030
[  840.700554] nouveau 0000:00:0d.0: bus: MMIO write of 00000000 FAULT at 00b030
root@multimedia:/home/user#

 





root@multimedia:/home/user# cat /var/log/Xorg.0.log
cat: /var/log/Xorg.0.log: Aucun fichier ou dossier de ce type
root@multimedia:/home/user#



 



Je n'ai pas ce fichier Xorg.0.log

#22 Re : Matériel » Probléme graphique aléatoire » 03-11-2019 21:38:58

Le probléme se produit quelque soit le GNOME.

Je joint le syslog :
https://www.sendbox.fr/osbzAwsJ

J'ai un doute sur un log :


ov  3 21:18:26 multimedia /usr/lib/gdm3/gdm-x-session[988]: dbus-update-activation-environment: setting GTK_MODULES=gail:atk-bridge
Nov  3 21:18:27 multimedia kernel: [   55.294115] nouveau 0000:00:0d.0: bus: MMIO write of 02760001 FAULT at 00b010
Nov  3 21:18:27 multimedia kernel: [   55.297138] nouveau 0000:00:0d.0: bus: MMIO write of 02780001 FAULT at 00b020
Nov  3 21:18:27 multimedia /usr/lib/gdm3/gdm-x-session[988]: OpenGL version: 2.
Nov  3 21:18:27 multimedia /usr/lib/gdm3/gdm-x-session[988]: dbus-update-activation-environment: setting QT_ACCESSIBILITY=1
Nov  3 21:18:27 multimedia /usr/lib/gdm3/gdm-x-session[988]: dbus-update-activation-environment: setting QT_LINUX_ACCESSIBILITY_ALWAYS_ON
 

#23 Re : Matériel » Probléme graphique aléatoire » 03-11-2019 21:07:38

Probléme malheureusement toujours pas résolut.
Je pense que c'est bien autre choses que la video.
Je cherche une aiguille dans une boite de foins.
Tous les mises à jours sont installés.
Le dernier plantage à mort aléatoirement avec affichage video scintillant raillure (je ne peux pas l'expliquer), c'était en effectuant une action suspendre une machine virtuelle.

Personne pour m'aider.

Sur Ubuntu 10.10 je n'avais pas ce probléme aléatoire.

#24 Re : Matériel » Probléme graphique aléatoire » 03-11-2019 20:12:00

Les paquets 'xserver-xorg-video-nouveau' et 'libgl1-mesa-glx libgl1-mesa-dri' sont déjà installés.
J'ai désactiver le compositeur effet de bureau en changant opengl->xrender.

On verra bien

#25 Re : Matériel » Probléme graphique aléatoire » 02-11-2019 23:14:46

Voici:


root@multimedia:/home/user# lspci -nnk | grep -iE "vga|3d|display" -A 3
00:0d.0 VGA compatible controller [0300]: NVIDIA Corporation C61 [GeForce 6150SE nForce 430] [10de:03d0] (rev a2)
  Subsystem: Acer Incorporated [ALI] C61 [GeForce 6150SE nForce 430] [1025:0394]
  Kernel driver in use: nouveau
  Kernel modules: nouveau

 



J'avais installer la debian sans me preoccuper du driver graphique.

Pied de page des forums

Propulsé par FluxBB