Debian Debian-France Debian-Facile Debian-fr.org Debian-fr.xyz Debian ? Communautés

Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#1 Autres » Installation de FL Studio 20 à partir de Playonlinux ?! » 27-11-2019 15:56:01

guyzmo
Réponses : 0
Salut à tous !
help.gif

cas présent : J'essaie d'installer FL Studio 20 avec sa signature producer edition à l'aide de Playonlinux en vain .
                     J'ai aussi essayer de copier coller les dossier necessaire (dossier Image-line et Asio4all situé dans programes files (x86) ) depuis un pc avec distri windows10 vers .wine/cdriverprogramesfiles(x86) pas possible de le lancer ou alors je ne sais pas comment m'y prendre .
scratchhead.gif
Question1 : est-ce possible de l'installer et de le lancer ? Si oui je me demande Comment ?

Question 2 : comment installer le FLstudio 10 présent dans playonlinux ? je bloque lorsqu'il me demande l'emplacement du fichier d'installation.

Merci

Ps: Je ne voie pas où placer ce sujet , donc modérateur hesiter pas a bien le situé .

#2 Re : Multimédia » [RESOLU] vlc ne lis pas les video .mov » 06-10-2019 14:12:03

golgot200 a écrit :


..

C'est dommage tout de même. J'aurai bien aimé savoir aussi avec  ht.



j'ai essayer et ça n'as rien donner d'où le fait apres cette essaie d'avoir décider d'installer une nouvelle distri

je te répond plus tard pour le top .

#3 Re : Multimédia » [RESOLU] vlc ne lis pas les video .mov » 06-10-2019 12:30:09

voila le retour des erreurs


-- Logs begin at Sun 2019-10-06 13:18:50 CEST, end at Sun 2019-10-06 13:34:44 CEST. --
oct. 06 13:19:01 guyzmo-pc kernel: r8169 0000:01:00.0: firmware: failed to load rtl_nic/rtl8168h-2.fw (-2)
oct. 06 13:19:00 guyzmo-pc systemd[1]: Failed to start Raise network interfaces.
oct. 06 13:19:00 guyzmo-pc dhclient[528]: exiting.
oct. 06 13:19:00 guyzmo-pc dhclient[528]:
oct. 06 13:19:00 guyzmo-pc dhclient[528]: process and the information we find helpful for debugging.
oct. 06 13:19:00 guyzmo-pc dhclient[528]: before submitting a bug.  These pages explain the proper
oct. 06 13:19:00 guyzmo-pc dhclient[528]: bugs on either our web page at www.isc.org or in the README file
oct. 06 13:19:00 guyzmo-pc dhclient[528]: than a configuration issue please read the section on submitting
oct. 06 13:19:00 guyzmo-pc dhclient[528]: If you think you have received this message due to a bug rather
oct. 06 13:19:00 guyzmo-pc dhclient[528]:
oct. 06 13:19:00 guyzmo-pc dhclient[528]: Failed to get interface index: No such device
oct. 06 13:18:53 guyzmo-pc kernel: Bluetooth: Loading patch file failed
oct. 06 13:18:53 guyzmo-pc kernel: firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware
oct. 06 13:18:53 guyzmo-pc kernel: usb 1-5.1: firmware: failed to load ar3k/AthrBT_0x31010000.dfu (-2)
oct. 06 13:18:50 guyzmo-pc kernel: ACPI Error: Method parse/execution failed \_SB.PCI0.LPCB.EC0._REG, AE_NOT_EXIST (20180810/pspars
oct. 06 13:18:50 guyzmo-pc kernel: ACPI Error: Region EmbeddedControl (ID=3) has no handler (20180810/exfldio-265)
oct. 06 13:18:50 guyzmo-pc kernel: ACPI Error: No handler for Region [RAM_] (000000003ddd3d6c) [EmbeddedControl] (20180810/evregion
oct. 06 13:18:50 guyzmo-pc kernel: ACPI Error: Method parse/execution failed \_SB.PCI0.LPCB.EC0._REG, AE_NOT_EXIST (20180810/pspars
oct. 06 13:18:50 guyzmo-pc kernel: ACPI Error: Region EmbeddedControl (ID=3) has no handler (20180810/exfldio-265)
oct. 06 13:18:50 guyzmo-pc kernel: ACPI Error: No handler for Region [RAM_] (000000003ddd3d6c) [EmbeddedControl] (20180810/evregion
~

 


hier l'ordi s'allumer sans probleme , petit a petit j'installe des paquets pour avoir certain programme et quand j'ai redemarer Kernel panic IO-APIC , bon je connais un peu le sujet j'edit le grub avec "noapic" la machine se lance mais pas de touchpad donc je re essaie avec "apic=debug" et là ça vient de se lancer .

#4 Re : Multimédia » [RESOLU] vlc ne lis pas les video .mov » 06-10-2019 11:26:47

Après une longue journée a essayer plusieurs distrib LIVE j'ai enfin réussis à installer debian 10 (buster) .
Il y as quelques erreurs au demarrage , j'essaierai de faire une capture d'ecran , c'est en rapport avec acpi ,mais le pc demarre , j'ai bien 4 CPU les vidéos se lise bien ( sur mplayer , vlc lui n'y arrive pas ).
Donc je peux dire que le Sujet est résolu? ou abandonné?

Merci à tous de votre Aide !

#5 Re : Multimédia » [RESOLU] vlc ne lis pas les video .mov » 04-10-2019 12:22:27

golgot200 a écrit :

acpi=off , il y a que "off" en option ?


EDIT: je ne suis pas un connaisseur, mais l'option acpi=ht (HyperThreading) qui si j'ai bien compris désactiverai l'ACPI sauf pour le processeur pourrait être une solution non ?



j'essaie en fin d'aprem là je ne peux rester ! Merci

#6 Re : Multimédia » [RESOLU] vlc ne lis pas les video .mov » 04-10-2019 12:07:38

sur les forum lors de l'installation il y avait 3 commandes qui pouvait résoudre le probleme qu'il y avais au grub les 2 autres étant d'inscrire a la place de acpi=off , noapic ou nolapic .voila tout ce que je sais sur le sujet car apres c'est un amis qui me la installler (bien que je soit présent avec lui)

#7 Re : Multimédia » [RESOLU] vlc ne lis pas les video .mov » 04-10-2019 11:45:34

J'attend une reponse sur le forum pour finalisé ma clé usb live boot et je fait l'essaie sans acpi=off .. si ça bloque au grub (comme durant l'essaie d'installation) je fait une réinstalle et change le sujet en Abandonné .

#8 Installation de Debian » blocage pour finalisé une cle-usb boot live » 04-10-2019 11:41:50

guyzmo
Réponses : 2
Bonjour , j'ai suivit ce tuto pour installer un live LibraZiK2 et Persistence : http://librazik.tuxfamily.org/doc2/manu … ersistante
et je me retrouve bloquer à la dernière étapes "Rendre la clé usb amorçable"

j'ai bien demonter la clé usb (en la laissant brancher) puis dans le terminal j'ai rentrer la commande:

 su -c "/sbin/install-mbr /dev/sdb"



et le retour est:

Failed to open /dev/sdb: No medium found



et sans demonter la clé le retour m'annonce :

install-mbr:/dev/sdb: Probable detection of modern MBR format which is currently incompatible with install-mbr.  Installing will probably break Windows installations on this system.  Use --force to override.



Dois-je exécuter "  --force " ou c'est pas la solution ?
Je n'ai pas encore essayer la commande suivante du tuto!

Merci par avance!

#9 Re : Multimédia » [RESOLU] vlc ne lis pas les video .mov » 04-10-2019 09:59:38

Bon je vais faire une dernieres journée a essayer quelques manipe , j'ai booté une usb avec un live de librazik2 et un live de debian buster au cas où on y arrive pas (ps: je bloque sur une manipe mais j'enverrai un mp a l'un de vous 2 pour une incomprehension sur une étape).

Cela étant dit je renvoie les retour des commandes par ordre chronologique smile :

-le paquets "firmware-misc-nonfree" est bien installé
-drm

 dmesg | grep drm


[   24.773780] [drm] Initialized


-intel

dmesg | grep intel


[    0.991052] intel_idle: MWAIT substates: 0x33000020
[    0.991055] intel_idle: v0.4.1 model 0x4C
[    0.991167] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.017298] intel_pstate: Intel P-state driver initializing
[   24.851231] snd_hda_intel 0000:00:1b.0: assigned PCI INT A -> IRQ 10
[   24.888634] snd_hda_intel 0000:00:1b.0: failed to add i915 component master (-19)
[   26.528653] intel_rapl: Found RAPL domain package
[   26.528658] intel_rapl: Found RAPL domain core



journalctl -r -p err



et hard info est installé .

-- Logs begin at Fri 2019-10-04 08:17:17 CEST, end at Fri 2019-10-04 10:52:17 CEST. --
oct. 04 09:32:54 debian kernel: FAT-fs (sdb2): unable to read boot sector to mark fs as dirty
oct. 04 09:32:54 debian systemd-udevd[3120]: inotify_add_watch(9, /dev/sdb, 10) failed: No such file or directory
oct. 04 08:51:26 debian pulseaudio[1031]: [alsa-sink-ALC255 Analog] alsa-sink.c: We were woken up with POLLOUT set -- however a subsequent snd_pcm_avail() returned 0 or
oct. 04 08:51:26 debian pulseaudio[1031]: [alsa-sink-ALC255 Analog] alsa-sink.c: Most likely this is a bug in the ALSA driver 'snd_hda_intel'. Please report this issue
oct. 04 08:51:26 debian pulseaudio[1031]: [alsa-sink-ALC255 Analog] alsa-sink.c: ALSA woke us up to write new data to the device, but there was actually nothing to writ
oct. 04 08:17:27 debian avahi-daemon[438]: chroot.c: open() failed: No such file or directory
 

(ps : je bloc sur le bootage de la clé usb clà se voit big_smile )

dmesg | grep node


[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000017fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.000000]   node   0: [mem 0x0000000020200000-0x0000000074993fff]
[    0.000000]   node   0: [mem 0x00000000749d4000-0x000000007a0d3fff]
[    0.000000]   node   0: [mem 0x000000007a614000-0x000000007b341fff]
[    0.000000]   node   0: [mem 0x000000007bc42000-0x000000007bffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000017fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000017fffffff]
[    0.000000] On node 0 totalpages: 1027869
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:1 nr_node_ids:1
[    0.004653] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.112215] x86: Booted up 1 node, 1 CPUs



pour

cat /proc/cmdline


BOOT_IMAGE=/boot/vmlinuz-4.9.0-11-rt-amd64 root=UUID=0224725e-04c1-40ff-8983-d8068df1a4a0 ro i8042.nopnp acpi=off quiet



Je voudrais finir de booter ma cle usb avec sa persistence avant d'essayer d'enlever acpi=off , au cas ou je redemare plus smile

#10 Re : Multimédia » [RESOLU] vlc ne lis pas les video .mov » 04-10-2019 00:50:15

glxinfo -B


name of display: :0
display: :0  screen: 0
direct rendering: Yes
Extended renderer info (GLX_MESA_query_renderer):
    Vendor: VMware, Inc. (0xffffffff)
    Device: llvmpipe (LLVM 3.9, 128 bits) (0xffffffff)
    Version: 13.0.6
    Accelerated: no
    Video memory: 3874MB
    Unified memory: no
    Preferred profile: core (0x1)
    Max core profile version: 3.3
    Max compat profile version: 3.0
    Max GLES1 profile version: 1.1
    Max GLES[23] profile version: 3.0
OpenGL vendor string: VMware, Inc.
OpenGL renderer string: Gallium 0.4 on llvmpipe (LLVM 3.9, 128 bits)
OpenGL core profile version string: 3.3 (Core Profile) Mesa 13.0.6
OpenGL core profile shading language version string: 3.30
OpenGL core profile context flags: (none)
OpenGL core profile profile mask: core profile

OpenGL version string: 3.0 Mesa 13.0.6
OpenGL shading language version string: 1.30
OpenGL context flags: (none)

OpenGL ES profile version string: OpenGL ES 3.0 Mesa 13.0.6
OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.00



et

dmesg


[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] percpu: Embedded 116 pages/cpu s437952 r8192 d28992 u2097152
[    0.000000] pcpu-alloc: s437952 r8192 d28992 u2097152 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1011786
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-11-rt-amd64 root=UUID=0224725e-04c1-40ff-8983-d8068df1a4a0 ro i8042.nopnp acpi=off quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3944420K/4111476K available (6423K kernel code, 1155K rwdata, 2916K rodata, 1680K init, 856K bss, 167056K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=1.
[    0.000000]  RCU kthread priority: 1.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.000000] NR_IRQS:33024 nr_irqs:32 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] tsc: Detected 1600.000 MHz processor
[    0.000007] Calibrating delay loop (skipped), value calculated using timer frequency.. 3200.00 BogoMIPS (lpj=6400000)
[    0.000009] pid_max: default: 32768 minimum: 301
[    0.000104] Security Framework initialized
[    0.000106] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.000117] AppArmor: AppArmor disabled by boot time parameter
[    0.001445] Dentry cache hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.004669] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.005671] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.005689] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.006266] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.006267] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.006279] mce: CPU supports 6 MCE banks
[    0.006296] process: using mwait in idle threads
[    0.006301] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
[    0.006303] Last level dTLB entries: 4KB 256, 2MB 16, 4MB 16, 1GB 0
[    0.006306] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.006308] Spectre V2 : Mitigation: Full generic retpoline
[    0.006309] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.006311] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.016085] Freeing SMP alternatives memory: 24K
[    0.017180] ftrace: allocating 25279 entries in 99 pages
[    0.035985] spurious 8259A interrupt: IRQ7.
[    0.048922] smpboot: Max logical packages: 1
[    0.048930] smpboot: SMP motherboard not detected
[    0.048932] smpboot: SMP disabled
[    0.048972] TSC deadline timer enabled
[    0.049039] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, 8-deep LBR, full-width counters, Intel PMU driver.
[    0.049064] ... version:                3
[    0.049066] ... bit width:              40
[    0.049067] ... generic registers:      2
[    0.049070] ... value mask:             000000ffffffffff
[    0.049071] ... max period:             0000007fffffffff
[    0.049073] ... fixed-purpose events:   3
[    0.049074] ... event mask:             0000000700000003
[    0.105270] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.113154] x86: Booted up 1 node, 1 CPUs
[    0.113158] smpboot: Total of 1 processors activated (3200.00 BogoMIPS)
[    0.114035] devtmpfs: initialized
[    0.114210] x86/mm: Memory block size: 128MB
[    0.125229] PM: Registering ACPI NVS region [mem 0x74994000-0x749d3fff] (262144 bytes)
[    0.125246] PM: Registering ACPI NVS region [mem 0x7a4d4000-0x7a5d3fff] (1048576 bytes)
[    0.125431] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.125451] futex hash table entries: 256 (order: 3, 32768 bytes)
[    0.125539] pinctrl core: initialized pinctrl subsystem
[    0.125888] NET: Registered protocol family 16
[    0.129217] cpuidle: using governor ladder
[    0.129232] cpuidle: using governor menu
[    0.129459] PCI: Using configuration type 1 for base access
[    0.133349] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.149371] ACPI: Interpreter disabled.
[    0.149542] vgaarb: loaded
[    0.153278] PCI: Probing PCI hardware
[    0.153281] PCI: root bus 00: using default resources
[    0.153284] PCI: Probing PCI hardware (bus 00)
[    0.153357] PCI host bridge to bus 0000:00
[    0.153365] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    0.153369] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
[    0.153373] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    0.153389] pci 0000:00:00.0: [8086:2280] type 00 class 0x060000
[    0.153542] pci 0000:00:02.0: [8086:22b1] type 00 class 0x030000
[    0.153571] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x90ffffff 64bit]
[    0.153585] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref]
[    0.153596] pci 0000:00:02.0: reg 0x20: [io  0x2000-0x203f]
[    0.153729] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.153733] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.153795] pci 0000:00:13.0: [8086:22a3] type 00 class 0x010601
[    0.153862] pci 0000:00:13.0: reg 0x20: [io  0x2060-0x207f]
[    0.153876] pci 0000:00:13.0: reg 0x24: [mem 0x9141c000-0x9141c7ff]
[    0.153942] pci 0000:00:13.0: PME# supported from D3hot
[    0.154073] pci 0000:00:14.0: [8086:22b5] type 00 class 0x0c0330
[    0.154105] pci 0000:00:14.0: reg 0x10: [mem 0x91400000-0x9140ffff 64bit]
[    0.154205] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.154338] pci 0000:00:1a.0: [8086:2298] type 00 class 0x108000
[    0.154364] pci 0000:00:1a.0: reg 0x10: [mem 0x91300000-0x913fffff]
[    0.154378] pci 0000:00:1a.0: reg 0x14: [mem 0x91200000-0x912fffff]
[    0.154475] pci 0000:00:1a.0: PME# supported from D0 D3hot
[    0.154594] pci 0000:00:1b.0: [8086:2284] type 00 class 0x040300
[    0.154630] pci 0000:00:1b.0: reg 0x10: [mem 0x91410000-0x91413fff 64bit]
[    0.154747] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.154875] pci 0000:00:1c.0: [8086:22c8] type 01 class 0x060400
[    0.154983] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.155105] pci 0000:00:1c.1: [8086:22ca] type 01 class 0x060400
[    0.155211] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.155353] pci 0000:00:1f.0: [8086:229c] type 00 class 0x060100
[    0.155602] pci 0000:00:1f.3: [8086:2292] type 00 class 0x0c0500
[    0.155658] pci 0000:00:1f.3: reg 0x10: [mem 0x91418000-0x9141801f]
[    0.155778] pci 0000:00:1f.3: reg 0x20: [io  0x2040-0x205f]
[    0.156144] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[    0.156170] pci 0000:01:00.0: reg 0x10: [io  0x1000-0x10ff]
[    0.156210] pci 0000:01:00.0: reg 0x18: [mem 0x91104000-0x91104fff 64bit]
[    0.156235] pci 0000:01:00.0: reg 0x20: [mem 0x91100000-0x91103fff 64bit]
[    0.156337] pci 0000:01:00.0: supports D1 D2
[    0.156341] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.165309] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.165317] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
[    0.165323] pci 0000:00:1c.0:   bridge window [mem 0x91100000-0x911fffff]
[    0.165450] pci 0000:02:00.0: [168c:0036] type 00 class 0x028000
[    0.165483] pci 0000:02:00.0: reg 0x10: [mem 0x91000000-0x9107ffff 64bit]
[    0.165553] pci 0000:02:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[    0.165626] pci 0000:02:00.0: supports D1 D2
[    0.165629] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.177322] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.177333] pci 0000:00:1c.1:   bridge window [mem 0x91000000-0x910fffff]
[    0.177364] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 02
[    0.177461] pci 0000:00:1f.0: PIIX/ICH IRQ router [8086:229c]
[    0.177503] PCI: pci_cache_line_size set to 64 bytes
[    0.177579] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[    0.177584] e820: reserve RAM buffer [mem 0x74994000-0x77ffffff]
[    0.177586] e820: reserve RAM buffer [mem 0x7a0d4000-0x7bffffff]
[    0.177589] e820: reserve RAM buffer [mem 0x7b342000-0x7bffffff]
[    0.181409] clocksource: Switched to clocksource refined-jiffies
[    0.211369] VFS: Disk quotas dquot_6.6.0
[    0.211411] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.211640] pnp: PnP ACPI: disabled
[    0.217146] pci 0000:02:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[    0.217192] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.217198] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
[    0.217206] pci 0000:00:1c.0:   bridge window [mem 0x91100000-0x911fffff]
[    0.217225] pci 0000:02:00.0: BAR 6: assigned [mem 0x91080000-0x9108ffff pref]
[    0.217230] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.217238] pci 0000:00:1c.1:   bridge window [mem 0x91000000-0x910fffff]
[    0.217253] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    0.217256] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
[    0.217260] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
[    0.217263] pci_bus 0000:01: resource 1 [mem 0x91100000-0x911fffff]
[    0.217266] pci_bus 0000:02: resource 1 [mem 0x91000000-0x910fffff]
[    0.217346] NET: Registered protocol family 2
[    0.217801] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.218428] TCP bind hash table entries: 32768 (order: 8, 1835008 bytes)
[    0.219013] TCP: Hash tables configured (established 32768 bind 32768)
[    0.219186] UDP hash table entries: 2048 (order: 6, 262144 bytes)
[    0.219355] UDP-Lite hash table entries: 2048 (order: 6, 262144 bytes)
[    0.219594] NET: Registered protocol family 1
[    0.219636] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.219668] PCI: setting IRQ 11 as level-triggered
[    0.219673] pci 0000:00:14.0: assigned PCI INT A -> IRQ 11
[    0.223586] PCI: CLS 64 bytes, default 64
[    0.223751] Unpacking initramfs...
[    0.976374] Freeing initrd memory: 18872K
[    0.976383] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.976387] software IO TLB: mapped [mem 0x760d4000-0x7a0d4000] (64MB)
[    0.976580] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    0.977397] audit: initializing netlink subsys (disabled)
[    0.977442] audit: type=2000 audit(1570128992.940:1): initialized
[    0.981152] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[    0.986077] zbud: loaded
[    0.988643] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.989098] io scheduler noop registered
[    0.989101] io scheduler deadline registered
[    0.989198] io scheduler cfq registered (default)
[    0.989379] PCI: setting IRQ 7 as level-triggered
[    0.989387] pcieport 0000:00:1c.0: assigned PCI INT A -> IRQ 7
[    0.989395] pcieport 0000:00:1c.0: sharing IRQ 7 with 0000:00:02.0
[    0.989425] pcieport 0000:00:1c.0: sharing IRQ 7 with 0000:01:00.0
[    0.989652] pcieport 0000:00:1c.1: assigned PCI INT B -> IRQ 11
[    0.989690] pcieport 0000:00:1c.1: sharing IRQ 11 with 0000:02:00.0
[    0.990013] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    0.990018] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    0.990025] pcie_pme 0000:00:1c.0:pcie001: service driver pcie_pme loaded
[    0.990138] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[    0.990141] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    0.990148] pcie_pme 0000:00:1c.1:pcie001: service driver pcie_pme loaded
[    0.990183] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.990204] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.990240] intel_idle: MWAIT substates: 0x33000020
[    0.990243] intel_idle: v0.4.1 model 0x4C
[    0.990356] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.990524] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.013048] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.013812] Linux agpgart interface v0.103
[    1.013960] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    1.013962] AMD IOMMUv2 functionality not available on this system
[    1.014162] i8042: PNP detection disabled
[    1.017727] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.017741] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.018093] mousedev: PS/2 mouse device common for all mice
[    1.018394] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[    1.018492] rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram
[    1.018509] intel_pstate: Intel P-state driver initializing
[    1.019517] NET: Registered protocol family 10
[    1.022848] mip6: Mobile IPv6
[    1.022854] NET: Registered protocol family 17
[    1.022862] mpls_gso: MPLS GSO support
[    1.023348] microcode: sig=0x406c3, pf=0x1, revision=0x33e
[    1.023458] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.023888] registered taskstats version 1
[    1.023968] zswap: loaded using pool lzo/zbud
[    1.024095] ima: No TPM chip found, activating TPM-bypass!
[    1.024101] ima: Allocated hash algorithm: sha256
[    1.026785] rtc_cmos rtc_cmos: setting system clock to 2019-10-03 18:56:33 UTC (1570128993)
[    1.027026] PM: Hibernation image not present or could not be loaded.
[    1.030470] Freeing unused kernel memory: 1680K
[    1.030474] Write protecting the kernel read-only data: 12288k
[    1.032546] Freeing unused kernel memory: 1752K
[    1.040847] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.042683] Freeing unused kernel memory: 1180K
[    1.053263] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.090342] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.090613] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.090645] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.166084] SCSI subsystem initialized
[    1.169904] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.169959] r8169 0000:01:00.0: assigned PCI INT A -> IRQ 7
[    1.169967] r8169 0000:01:00.0: sharing IRQ 7 with 0000:00:02.0
[    1.170556] usbcore: registered new interface driver usbfs
[    1.170580] usbcore: registered new interface driver hub
[    1.172090] usbcore: registered new device driver usb
[    1.182780] r8169 0000:01:00.0 eth0: RTL8168h/8111h at 0xffffac26c0a41000, 30:65:ec:77:b3:8b, XID 14100800 IRQ 18
[    1.182785] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.183846] PCI: setting IRQ 1 as level-triggered
[    1.183856] i801_smbus 0000:00:1f.3: found PCI INT B -> IRQ 1
[    1.185222] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    1.186052] xhci_hcd 0000:00:14.0: assigned PCI INT A -> IRQ 11
[    1.186138] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.186151] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    1.191291] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x01509810
[    1.191307] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.192768] libata version 3.00 loaded.
[    1.196589] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.196594] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.196597] usb usb1: Product: xHCI Host Controller
[    1.196599] usb usb1: Manufacturer: Linux 4.9.0-11-rt-amd64 xhci-hcd
[    1.196601] usb usb1: SerialNumber: 0000:00:14.0
[    1.196893] hub 1-0:1.0: USB hub found
[    1.196928] hub 1-0:1.0: 7 ports detected
[    1.197463] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.197471] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.197590] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    1.197593] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.197596] usb usb2: Product: xHCI Host Controller
[    1.197598] usb usb2: Manufacturer: Linux 4.9.0-11-rt-amd64 xhci-hcd
[    1.197600] usb usb2: SerialNumber: 0000:00:14.0
[    1.198930] hub 2-0:1.0: USB hub found
[    1.199911] hub 2-0:1.0: 6 ports detected
[    1.201451] ACPI: <n/a>: failed to evaluate _DSM (0x1001)
[    1.201495] ahci 0000:00:13.0: version 3.0
[    1.201512] PCI: setting IRQ 6 as level-triggered
[    1.201520] ahci 0000:00:13.0: found PCI INT A -> IRQ 6
[    1.208921] SSE version of gcm_enc/dec engaged.
[    1.213149] ahci 0000:00:13.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    1.213156] ahci 0000:00:13.0: flags: 64bit ncq led clo only pio slum part deso sadm sds apst
[    1.224984] scsi host0: ahci
[    1.236867] scsi host1: ahci
[    1.237021] ata1: SATA max UDMA/133 abar m2048@0x9141c000 port 0x9141c100 irq 20
[    1.237025] ata2: SATA max UDMA/133 abar m2048@0x9141c000 port 0x9141c180 irq 20
[    1.298452] r8169 0000:01:00.0 enp1s0: renamed from eth0
[    1.529221] usb 1-3: new high-speed USB device number 2 using xhci_hcd
[    1.565062] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.565103] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.565840] ata1.00: ATA-9: WDC WD10JPVX-22JC3T0, 01.01A01, max UDMA/133
[    1.565845] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    1.566740] ata1.00: configured for UDMA/133
[    1.568194] ata2.00: ATAPI: MATSHITA DVD-RAM UJ8HC, 1.00, max UDMA/100
[    1.569253] scsi 0:0:0:0: Direct-Access     ATA      WDC WD10JPVX-22J 1A01 PQ: 0 ANSI: 5
[    1.570606] ata2.00: configured for UDMA/100
[    1.600355] scsi 1:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ8HC    1.00 PQ: 0 ANSI: 5
[    1.628103] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    1.628106] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.628239] sd 0:0:0:0: [sda] Write Protect is off
[    1.628242] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.628298] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.644358] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.644361] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.644846] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.685562] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x4a5f08)
[    1.687244] usb 1-3: New USB device found, idVendor=04f2, idProduct=b47f
[    1.687250] usb 1-3: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    1.687254] usb 1-3: Product: VGA Webcam
[    1.687257] usb 1-3: Manufacturer: Chicony Electronics Co.,Ltd.
[    1.687259] usb 1-3: SerialNumber: 0x0001
[    1.696581] psmouse serio1: elantech: Synaptics capabilities query result 0x00, 0x15, 0x0f.
[    1.706353] psmouse serio1: elantech: Elan sample query result 09, 38, 95
[    1.721098]  sda: sda1 sda2
[    1.723328] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.759508] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input2
[    1.808057] random: fast init done
[    1.811015] usb 1-5: new high-speed USB device number 3 using xhci_hcd
[    1.951744] usb 1-5: New USB device found, idVendor=05e3, idProduct=0608
[    1.951751] usb 1-5: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.951756] usb 1-5: Product: USB2.0 Hub
[    1.953390] hub 1-5:1.0: USB hub found
[    1.953701] hub 1-5:1.0: 4 ports detected
[    1.993790] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x171024fa93b, max_idle_ns: 440795253189 ns
[    1.993814] clocksource: Switched to clocksource tsc
[    2.153892] PM: Starting manual resume from disk
[    2.153899] PM: Hibernation image partition 8:1 present
[    2.153900] PM: Looking for hibernation image.
[    2.154109] PM: Image not found (code -22)
[    2.154111] PM: Hibernation image not present or could not be loaded.
[    2.241828] usb 1-5.1: new full-speed USB device number 4 using xhci_hcd
[    2.343390] usb 1-5.1: New USB device found, idVendor=0489, idProduct=e078
[    2.343397] usb 1-5.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.425802] usb 1-5.4: new high-speed USB device number 5 using xhci_hcd
[    2.484755] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    2.526169] usb 1-5.4: New USB device found, idVendor=0bda, idProduct=0129
[    2.526177] usb 1-5.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.526181] usb 1-5.4: Product: USB2.0-CRW
[    2.526184] usb 1-5.4: Manufacturer: Generic
[    2.526187] usb 1-5.4: SerialNumber: 20100201396000000
[    2.542692] usbcore: registered new interface driver rtsx_usb
[    3.805446] ip_tables: (C) 2000-2006 Netfilter Core Team
[    3.921099] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    3.921524] systemd[1]: Detected architecture x86-64.
[    3.942122] systemd[1]: Set hostname to <debian>.
[    4.560721] random: crng init done
[    4.560726] random: 7 urandom warning(s) missed due to ratelimiting
[    5.420906] systemd[1]: Created slice System Slice.
[    5.423305] systemd[1]: Mounting POSIX Message Queue File System...
[    5.425997] systemd[1]: Mounting Debug File System...
[    5.426244] systemd[1]: Reached target User and Group Name Lookups.
[    5.427224] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    5.427525] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    5.427877] systemd[1]: Listening on Journal Audit Socket.
[    5.959918] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[    6.158059] systemd-journald[211]: Received request to flush runtime journal from PID 1
[    6.535348] lp: driver loaded but no devices found
[    6.666155] ppdev: user-space parallel port driver
[    9.105398] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    9.203912] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    9.204039] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    9.253798] [drm] Initialized
[    9.570543] input: PC Speaker as /devices/platform/pcspkr/input/input3
[    9.794633] PCI: setting IRQ 10 as level-triggered
[    9.794642] snd_hda_intel 0000:00:1b.0: assigned PCI INT A -> IRQ 10
[    9.803867] snd_hda_intel 0000:00:1b.0: failed to add i915 component master (-19)
[   10.125672] Bluetooth: Core ver 2.22
[   10.126314] NET: Registered protocol family 31
[   10.126318] Bluetooth: HCI device and connection manager initialized
[   10.126326] Bluetooth: HCI socket layer initialized
[   10.126331] Bluetooth: L2CAP socket layer initialized
[   10.126349] Bluetooth: SCO socket layer initialized
[   10.152856] iTCO_vendor_support: vendor-support=0
[   10.154545] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   10.154626] iTCO_wdt: Found a Braswell SoC TCO device (Version=3, TCOBASE=0x0460)
[   10.155714] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   10.250798] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC255: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   10.250806] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   10.250812] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   10.250815] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   10.250817] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   10.250823] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x1b
[   10.286410] snd_hda_codec_hdmi hdaudioC0D2: No i915 binding for Intel HDMI/DP codec
[   10.287363] snd_hda_codec_hdmi hdaudioC0D2: No i915 binding for Intel HDMI/DP codec
[   10.297009] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
[   10.299000] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[   10.299608] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[   10.518538] usbcore: registered new interface driver btusb
[   10.675470] usb 1-5.1: firmware: direct-loading firmware ar3k/AthrBT_0x31010000.dfu
[   10.798092] usb 1-5.1: firmware: direct-loading firmware ar3k/ramps_0x31010000_40.dfu
[   10.808094] usbcore: registered new interface driver ath3k
[   10.830008] intel_rapl: Found RAPL domain package
[   10.830012] intel_rapl: Found RAPL domain core
[   10.880207] usb 1-5.1: USB disconnect, device number 4
[   11.105747] usb 1-5.1: new full-speed USB device number 6 using xhci_hcd
[   11.206981] usb 1-5.1: New USB device found, idVendor=0489, idProduct=e078
[   11.206989] usb 1-5.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   11.734779] ath9k 0000:02:00.0: assigned PCI INT A -> IRQ 11
[   11.735080] ath: phy0: WB335 2-ANT card detected
[   11.735083] ath: phy0: Set BT/WLAN RX diversity capability
[   11.744071] ath: phy0: Enable LNA combining
[   11.745317] ath: phy0: ASPM enabled: 0x42
[   11.745320] ath: EEPROM regdomain: 0x6c
[   11.745321] ath: EEPROM indicates we should expect a direct regpair map
[   11.745324] ath: Country alpha2 being used: 00
[   11.745326] ath: Regpair used: 0x6c
[   11.988700] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   11.989397] ieee80211 phy0: Atheros AR9565 Rev:1 mem=0xffffac26c1000000, irq=11
[   11.996556] media: Linux media interface: v0.10
[   12.144519] Linux video capture interface: v2.00
[   12.359825] uvcvideo: Found UVC 1.00 device VGA Webcam (04f2:b47f)
[   12.366424] uvcvideo 1-3:1.0: Entity type for entity Extension 4 was not initialized!
[   12.366436] uvcvideo 1-3:1.0: Entity type for entity Extension 7 was not initialized!
[   12.366441] uvcvideo 1-3:1.0: Entity type for entity Processing 2 was not initialized!
[   12.366446] uvcvideo 1-3:1.0: Entity type for entity Camera 1 was not initialized!
[   12.367563] input: VGA Webcam as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/input/input7
[   12.368559] usbcore: registered new interface driver uvcvideo
[   12.368562] USB Video Class driver (1.1.1)
[   12.611043] ath9k 0000:02:00.0 wlp2s0: renamed from wlan0
[   12.799922] Adding 15624188k swap on /dev/sda1.  Priority:-1 extents:1 across:15624188k FS
[   21.203647] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[   21.267284] r8169 0000:01:00.0: firmware: direct-loading firmware rtl_nic/rtl8168h-2.fw
[   21.328449] r8169 0000:01:00.0 enp1s0: link down
[   21.328640] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[   21.378940] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   21.393697] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   21.462953] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   22.612323] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   37.502177] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   38.572171] wlp2s0: authenticate with 00:19:70:74:90:c7
[   38.599051] wlp2s0: send auth to 00:19:70:74:90:c7 (try 1/3)
[   38.601799] wlp2s0: authenticated
[   38.609923] wlp2s0: associate with 00:19:70:74:90:c7 (try 1/3)
[   38.614053] wlp2s0: RX AssocResp from 00:19:70:74:90:c7 (capab=0x431 status=0 aid=6)
[   38.614199] wlp2s0: associated
[   38.838343] ath: EEPROM regdomain: 0x80fa
[   38.838347] ath: EEPROM indicates we should expect a country code
[   38.838350] ath: doing EEPROM country->regdmn map search
[   38.838351] ath: country maps to regdmn code: 0x37
[   38.838353] ath: Country alpha2 being used: FR
[   38.838355] ath: Regpair used: 0x37
[   38.838359] ath: regdomain 0x80fa dynamically updated by country IE
[   38.840055] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 1248.115509] perf: interrupt took too long (2507 > 2500), lowering kernel.perf_event_max_sample_rate to 79750
[ 1489.820583] perf: interrupt took too long (3150 > 3133), lowering kernel.perf_event_max_sample_rate to 63500
[ 1710.204373] perf: interrupt took too long (3959 > 3937), lowering kernel.perf_event_max_sample_rate to 50500
[ 2125.631154] perf: interrupt took too long (4952 > 4948), lowering kernel.perf_event_max_sample_rate to 40250
[ 2802.977160] perf: interrupt took too long (6200 > 6190), lowering kernel.perf_event_max_sample_rate to 32250
[ 4891.646059] perf: interrupt took too long (7756 > 7750)
kernel.perf_event_max_sample_rate to 25750



Voyez vous une erreur car pour moi je comprend pas tout.
MERCI

#11 Re : Multimédia » [RESOLU] vlc ne lis pas les video .mov » 04-10-2019 00:43:49

@golgot200
je viens de faire le test du live debian9 mate   et "lscpu" m'annonce bien 4 coeurs ....

je vais te citer les paquets installer en lien et faire une autres liste qui seront les paquets que je me demande si je dois les installer , si tu peux me donner ton avis ce serait simpa , Merci.

Paquet installés

-firmware-linux-free
-firmware-misc-nonfree
-intel-microcode(installé recemment)
-mesa-va-drivers
-i965-va-driver
-libdrm-intel1
-libva-drm1
-libva-wayland1
-libva-X11-1
-libva1
-libvdpau-va-gl1
-libx11-6
-libx11-dev
-libx11-doc
-va-driver-all
-vainfo
-vdpau-va-drivers




Paquets à installer?

-libyami-utils


Serait-il mieux pour moi de refaire une installe  ?!

#12 Re : Multimédia » [RESOLU] vlc ne lis pas les video .mov » 03-10-2019 13:12:23

après avoir encoder la vidéo avec handbrake pour avoir une resolution 720*406 la video se lis bien , le son et l image son calé voilàle rendu

Playing: /home/user/Vidéos/VID_test.m4v
 (+) Video --vid=1 (*) (h264)
 (+) Audio --aid=1 --alang=eng (*) (aac)
File tags:
 Title: VID_20190818_170428
libEGL warning: DRI2: failed to authenticate
[vo/opengl] Suspected software renderer or indirect context.
[vo/opengl] Suspected software renderer or indirect context.
Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
[vo/vdpau] Error when calling vdp_device_create_x11: 1
[vo/xv] No Xvideo support found.
[vo/sdl] Using opengl
Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
libva info: VA-API version 0.39.4
libva info: va_getDriverName() returns -1
libva error: va_getDriverName() failed with unknown libva error,driver_name=(null)
Running DIL (3.22.0) Version
DtsDeviceOpen: Opening HW in mode 0
DtsDeviceOpen: Create File Failed
Could not open codec.
[lavf] Edit lists are not correctly supported (FFmpeg issue).
AO: [pulse] 48000Hz stereo 2ch float
Using software decoding.
VO: [sdl] 720x406 => 721x406 yuv420p
AV: 00:00:43 / 00:00:43 (99%) A-V:  0.000 Dropped: 226


Exiting... (End of file)



j'ai rien vue dans le bios en rapport avec le cpu , j'attend d'avoir l'avis d'expert .

Pour information mon installe de debian 9 a été assez galère car il a fallut que j ecrive "acpi=off" pour que l'installe ne plante pas celà n'as aucun lien?!

#13 Re : Multimédia » [RESOLU] vlc ne lis pas les video .mov » 03-10-2019 12:40:15

Debian Alain a écrit :

Les deux mon colonel.



Fait à la lettre ! le test fait avec mpv donne ce retour (toujours la meme chose )

user@debian:~$

mpv --hwdec=auto '/home/user/Documents/photo samsung/VID_20190818_170428.mp4'
Playing: /home/user/Documents/photo samsung/VID_20190818_170428.mp4



 (+) Video --vid=1 (*) (h264)
 (+) Audio --aid=1 --alang=eng (*) (aac)
libEGL warning: DRI2: failed to authenticate
[vo/opengl] Suspected software renderer or indirect context.
[vo/opengl] Suspected software renderer or indirect context.
Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
[vo/vdpau] Error when calling vdp_device_create_x11: 1
[vo/xv] No Xvideo support found.
[vo/sdl] Using opengl
Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
libva info: VA-API version 0.39.4
libva info: va_getDriverName() returns -1
libva error: va_getDriverName() failed with unknown libva error,driver_name=(null)
Running DIL (3.22.0) Version
DtsDeviceOpen: Opening HW in mode 0
DtsDeviceOpen: Create File Failed
Could not open codec.
Using software decoding.
VO: [sdl] 1920x1080 yuv420p
AO: [pulse] 48000Hz stereo 2ch float
AV: 00:00:00 / 00:00:43 (0%) A-V:  0.482 Dropped: 8

Audio/Video desynchronisation detected! Possible reasons include too slow
hardware, temporary CPU spikes, broken drivers, and broken files. Audio
position will not match to the video (see A-V status field).

(Paused) AV: 00:00:09 / 00:00:43 (22%) A-V: 10.792 Dropped: 215


@golgot200

je vais regarder le bios et voir si je voie quoi que ce soit en lien avec les coeurs du processeur

#14 Re : Multimédia » [RESOLU] vlc ne lis pas les video .mov » 03-10-2019 12:19:55

@golgot200

voila le screenshot, désolé je ne suis pas arrivé a faire apparaitre l'image comme toi .. donc oui je voie qu'1coeur présent sur le monitor.

https://framapic.org/gallery#H8H5iTnofk … T1yiJe.png

@Debian Alain ,  je vais m'occuper de changer le sources list , et je regarde les lien que tu m'as transmit , c'ets vrai que certain lien (surtout lorsqu'il sont en anglais ) me perde un peu . Mais je fait mon maximum pour comprendre et suivre sans fautes les conseils donnée ou lus.


par  contre , pour xserver-xorg-etc... , tu n'a pas lu les liens que j'ai mis . ou tu n'as pas compris .

apt install --reinstall -t stretch-backports xserver-xorg-video-modesetting


apt remove xserver-xorg-video-intel


et teste voir ...



Dois-je suivre cette procedure (post#79) ou j'evite et je passe directement a la procedure du post #81 ?!

#15 Re : Multimédia » [RESOLU] vlc ne lis pas les video .mov » 02-10-2019 23:19:24

Pour vous répondre le pc a bien 4 coeurs ,
en regardant les paquets xserver-xorg installé je me demande si il est bon de les avoirs installés, je vous écrits les paquets installé (même ceux que je trouve OK)

xserver-xorg
xserver-xorg-core
x-server-xorg-input-all
xserver-xorg-input-libinput
xserver-xorg-input-synaptics
xserver-xorg-input-wacom
xserver-xorg-legacy
xserver-xorg-video-all
xserver-xorg-video-amdgpu
xserver-xorg-video-ati(?)
xserver-xorg-video-fbdev
xserver-xorg-video-intel
xserver-xorg-video-nouveau
xserver-xorg-video-qxl
xserver-xorg-video-radeon(?)
xserver-xorg-video-vesa
xserver-xorg-video-vmware



est-il necessaire que j'installe xserver-xorg-dev (car lui n'est pas installé)

@Debian Alain

c'est un ami qui m'as installé ma debian stretch du coup je ne sais pas si les dépots sont okay  je te retourne la liste des depots présents




# deb cdrom:[Debian GNU/Linux 9.5.0 _Stretch_ - Official amd64 NETINST 20180714-10:25]/ stretch main

# deb cdrom:[Debian GNU/Linux 9.5.0 _Stretch_ - Official amd64 NETINST 20180714-10:25]/ stretch main

# deb http://ftp.fr.debian.org/debian/ stretch main non-free contrib
# deb-src http://ftp.fr.debian.org/debian/ stretch main non-free contrib

# deb http://security.debian.org/debian-security/ stretch/updates main contrib non-free  
# deb-src http://security.debian.org/debian-security/ stretch/updates main contrib non-free

# stretch-updates, previously known as 'volatile'
# deb http://ftp.fr.debian.org/debian/ stretch-updates main contrib non-free
# deb-src http://ftp.fr.debian.org/debian/ stretch-updates main contrib non-free

# deb cdrom:[Debian GNU/Linux 9.5.0 _Stretch_ - Official amd64 NETINST 20180714-10:25]/ stretch main

deb http://debian.proxad.net/debian/ stretch main non-free contrib
deb-src http://debian.proxad.net/debian/ stretch main non-free contrib

deb http://security.debian.org/debian-security/ stretch/updates main contrib non-free
deb-src http://security.debian.org/debian-security/ stretch/updates main contrib non-free

# stretch-updates, previously known as 'volatile'
deb http://debian.proxad.net/debian/ stretch-updates main contrib non-free
deb-src http://debian.proxad.net/debian/ stretch-updates main contrib non-free
 



Merci de m'eclaircir Si mes dépots sont okay..

J'ai fait la manipe


apt install --reinstall xserver-xorg-video-modesetting


Qui s'est re installé avec succès.

Puis

lspci -nnk | grep -iE "vga|3d|display" -A 3


00:02.0 VGA compatible controller [0300]: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Integrated Graphics Controller [8086:22b1] (rev 21)
  Subsystem: Acer Incorporated [ALI] Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Integrated Graphics Controller [1025:1013]
  Kernel modules: i915
00:13.0 SATA controller [0106]: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series SATA Controller [8086:22a3] (rev 21)
 



J'attend vos réponse avant d'envoyer un Mp @robert2a (que j'ai vu présent sur des poste en lien avec les carte graphique).

THANKS

#16 Re : Multimédia » [RESOLU] vlc ne lis pas les video .mov » 02-10-2019 17:11:29

est -ce que cette commande peut t'aider?

 inxi -xxAv6
 



je te retranscrit une partie du retour (car bien complet) où je me demande s'il y as pas un problème (sur la ligne Driver : vesa ...)

Memory:    Using dmidecode: you must be root to run dmidecode
Graphics:  Card: Intel Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Integrated Graphics Controller
           bus-ID: 00:02.0 chip-ID: 8086:22b1
           Display Server: X.Org 1.19.2 drivers: vesa (unloaded: modesetting,fbdev)
           Resolution: 1368x768@0.00hz
           GLX Renderer: Gallium 0.4 on llvmpipe (LLVM 3.9, 128 bits)
           GLX Version: 3.0 Mesa 13.0.6 Direct Rendering: Yes

#17 Re : Multimédia » [RESOLU] vlc ne lis pas les video .mov » 02-10-2019 16:08:23

rien ne s'est passé lorsque j'ai fait la commande export j'ai ensuite lancer la seconde commande , et la ça ne m'ouvre même pas  mpv ..

user@debian:~$

export LIBVA_DRIVER_NAME=i965


user@debian:~$

mpv --hwdec=auto '/home/user/Documents/photo samsung/VID_20190818_170428.mp4'


Playing: /home/user/Documents/photo samsung/VID_20190818_170428.mp4
 (+) Video --vid=1 (*) (h264)
 (+) Audio --aid=1 --alang=eng (*) (aac)
libEGL warning: DRI2: failed to authenticate
[vo/opengl] Suspected software renderer or indirect context.
[vo/opengl] Suspected software renderer or indirect context.
Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
[vo/vdpau] Error when calling vdp_device_create_x11: 1
[vo/xv] No Xvideo support found.
[vo/sdl] Using opengl
Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
libva info: VA-API version 0.39.4
libva info: va_getDriverName() returns -1
libva info: User requested driver 'i965'
libva info: Trying to open /usr/lib/x86_64-linux-gnu/dri/i965_drv_video.so
libva info: Found init function __vaDriverInit_0_39
mpv: intel_driver.c:106: intel_driver_init: Assertion `VA_CHECK_DRM_AUTH_TYPE(ctx, VA_DRM_AUTH_DRI1) || VA_CHECK_DRM_AUTH_TYPE(ctx, VA_DRM_AUTH_DRI2) || VA_CHECK_DRM_AUTH_TYPE(ctx, VA_DRM_AUTH_CUSTOM)' failed.
Abandon

#18 Re : Multimédia » [RESOLU] vlc ne lis pas les video .mov » 02-10-2019 15:52:08

user@debian:~$

vainfo


libva info: VA-API version 0.39.4
libva info: va_getDriverName() returns -1
libva error: va_getDriverName() failed with unknown libva error,driver_name=(null)
vaInitialize failed with error code -1 (unknown libva error),exit


user@debian:~$

VDPAU_DRIVER=i965 vainfo


libva info: VA-API version 0.39.4
libva info: va_getDriverName() returns -1
libva error: va_getDriverName() failed with unknown libva error,driver_name=(null)
vaInitialize failed with error code -1 (unknown libva error),exit



ça donne ça ...kernal_panic.gif Oh le casse tête  !! Encore merci de prendre de ton temps pour m'aider !

#20 Re : Multimédia » [RESOLU] vlc ne lis pas les video .mov » 02-10-2019 15:23:28

user@debian:~$

VDPAU_DRIVER=va_gl vdpauinfo


display: :0   screen: 0
libva info: VA-API version 0.39.4
libva info: va_getDriverName() returns -1
libva error: va_getDriverName() failed with unknown libva error,driver_name=(null)
API version: 1
Information string: OpenGL/VAAPI backend for VDPAU

Video surface:

name   width height types
-------------------------------------------
420     4096  4096  NV12 YV12 UYVY YUYV Y8U8V8A8 V8U8Y8A8
422     4096  4096  NV12 YV12 UYVY YUYV Y8U8V8A8 V8U8Y8A8
444     4096  4096  NV12 YV12 UYVY YUYV Y8U8V8A8 V8U8Y8A8

Decoder capabilities:

name                        level macbs width height
----------------------------------------------------
MPEG1                          --- not supported ---
MPEG2_SIMPLE                   --- not supported ---
MPEG2_MAIN                     --- not supported ---
H264_BASELINE                  --- not supported ---
H264_MAIN                      --- not supported ---
H264_HIGH                      --- not supported ---
VC1_SIMPLE                     --- not supported ---
VC1_MAIN                       --- not supported ---
VC1_ADVANCED                   --- not supported ---
MPEG4_PART2_SP                 --- not supported ---
MPEG4_PART2_ASP                --- not supported ---
DIVX4_QMOBILE                  --- not supported ---
DIVX4_MOBILE                   --- not supported ---
DIVX4_HOME_THEATER             --- not supported ---
DIVX4_HD_1080P                 --- not supported ---
DIVX5_QMOBILE                  --- not supported ---
DIVX5_MOBILE                   --- not supported ---
DIVX5_HOME_THEATER             --- not supported ---
DIVX5_HD_1080P                 --- not supported ---
H264_CONSTRAINED_BASELINE      --- not supported ---
H264_EXTENDED                  --- not supported ---
H264_PROGRESSIVE_HIGH          --- not supported ---
H264_CONSTRAINED_HIGH          --- not supported ---
H264_HIGH_444_PREDICTIVE       --- not supported ---
HEVC_MAIN                      --- not supported ---
HEVC_MAIN_10                   --- not supported ---
HEVC_MAIN_STILL                --- not supported ---
HEVC_MAIN_12                   --- not supported ---
HEVC_MAIN_444                  --- not supported ---

Output surface:

name              width height nat types
----------------------------------------------------
B8G8R8A8          8192  8192    -  
R8G8B8A8          8192  8192    -  
R10G10B10A2       8192  8192    -  
B10G10R10A2       8192  8192    -  
A8                8192  8192    -  

Bitmap surface:

name              width height
------------------------------
B8G8R8A8          8192  8192
R8G8B8A8          8192  8192
R10G10B10A2       8192  8192
B10G10R10A2       8192  8192
A8                8192  8192

Video mixer:

feature name                    sup
------------------------------------
DEINTERLACE_TEMPORAL             -
DEINTERLACE_TEMPORAL_SPATIAL     -
INVERSE_TELECINE                 -
NOISE_REDUCTION                  -
SHARPNESS                        -
LUMA_KEY                         -
HIGH QUALITY SCALING - L1        -
HIGH QUALITY SCALING - L2        -
HIGH QUALITY SCALING - L3        -
HIGH QUALITY SCALING - L4        -
HIGH QUALITY SCALING - L5        -
HIGH QUALITY SCALING - L6        -
HIGH QUALITY SCALING - L7        -
HIGH QUALITY SCALING - L8        -
HIGH QUALITY SCALING - L9        -

parameter name                  sup      min      max
-----------------------------------------------------
VIDEO_SURFACE_WIDTH              -  
VIDEO_SURFACE_HEIGHT             -  
CHROMA_TYPE                      -  
LAYERS                           -  

attribute name                  sup      min      max
-----------------------------------------------------
BACKGROUND_COLOR                 -  
CSC_MATRIX                       -  
NOISE_REDUCTION_LEVEL            -  
SHARPNESS_LEVEL                  -  
LUMA_KEY_MIN_LUMA                -  
LUMA_KEY_MAX_LUMA    

            -

#21 Re : Multimédia » [RESOLU] vlc ne lis pas les video .mov » 02-10-2019 15:14:27

après installation voila le retour

Playing: /home/user/Documents/photo samsung/VID_20190818_152340.mp4
 (+) Video --vid=1 (*) (h264)
 (+) Audio --aid=1 --alang=eng (*) (aac)
libEGL warning: DRI2: failed to authenticate
[vo/opengl] Suspected software renderer or indirect context.
[vo/opengl] Suspected software renderer or indirect context.
Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
[vo/vdpau] Error when calling vdp_device_create_x11: 1
[vo/xv] No Xvideo support found.
[vo/sdl] Using opengl
Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
libva info: VA-API version 0.39.4
libva info: va_getDriverName() returns -1
libva error: va_getDriverName() failed with unknown libva error,driver_name=(null)
Running DIL (3.22.0) Version
DtsDeviceOpen: Opening HW in mode 0
DtsDeviceOpen: Create File Failed
Could not open codec.
Using software decoding.
VO: [sdl] 1920x1080 yuv420p
AO: [pulse] 48000Hz stereo 2ch float
AV: 00:00:00 / 00:00:30 (1%) A-V:  0.418 Dropped: 8

Audio/Video desynchronisation detected! Possible reasons include too slow
hardware, temporary CPU spikes, broken drivers, and broken files. Audio
position will not match to the video (see A-V status field).

AV: 00:00:30 / 00:00:30 (99%) A-V:  0.000 Dropped: 586


Exiting... (End of file)

#22 Re : Multimédia » [RESOLU] vlc ne lis pas les video .mov » 02-10-2019 15:02:45

user@debian:~$

apt-cache policy nvidia-vdpau-driver


nvidia-vdpau-driver:
  Installé : (aucun)
  Candidat : 390.116-1
 Table de version :
     390.116-1 500
        500 http://debian.proxad.net/debian stretch/non-free amd64 Packages
 


j'attend pour ne pas faire de betise  smile ayant une carte intel il est normal que je n'installe pas de paquet Nvidia ?! cependant ce essage revient souvent que ce soit sous vlc ou mpv..

#23 Re : Multimédia » [RESOLU] vlc ne lis pas les video .mov » 02-10-2019 14:47:00

oui tu as raison ce 'est pas si leger , mais c'est une video prise avec un telephone  du coup c'est plus leger que ma camera qui sort du .mov en 3k

user@debian:~$

 apt-cache policy libvdpau1


 libvdpau1:
  Installé : 1.1.1-6
  Candidat : 1.1.1-6
 Table de version :
 *** 1.1.1-6 500
        500 http://debian.proxad.net/debian stretch/main amd64 Packages
        100 /var/lib/dpkg/status


user@debian:~$

apt-cache policy libvdpau-dev


libvdpau-dev:
  Installé : (aucun)
  Candidat : 1.1.1-6
 Table de version :
     1.1.1-6 500
        500 http://debian.proxad.net/debian stretch/main amd64 Packages



Je suppose que je dois installer le paquet libvdpau-dev et refaire un essaie avec

mpv --hwdec=auto "TA_VIDEO"


??

EDIT: ce qui m'installerai 12 nouveaux paquet .

#24 Re : Multimédia » [RESOLU] vlc ne lis pas les video .mov » 02-10-2019 12:46:43

Bonjour !

user@debian:~$

mpv --hwdec=auto 'cd~/photo samsung/VID_20190818_152340.mp4'


Playing: /home/user/Documents/photo samsung/VID_20190818_152340.mp4
 (+) Video --vid=1 (*) (h264)
 (+) Audio --aid=1 --alang=eng (*) (aac)
libEGL warning: DRI2: failed to authenticate
[vo/opengl] Suspected software renderer or indirect context.
[vo/opengl] Suspected software renderer or indirect context.
Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
[vo/vdpau] Error when calling vdp_device_create_x11: 1
[vo/xv] No Xvideo support found.
[vo/sdl] Using opengl
Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
libva info: VA-API version 0.39.4
libva info: va_getDriverName() returns -1
libva error: va_getDriverName() failed with unknown libva error,driver_name=(null)
Running DIL (3.22.0) Version
DtsDeviceOpen: Opening HW in mode 0
DtsDeviceOpen: Create File Failed
Could not open codec.
Using software decoding.
VO: [sdl] 1920x1080 yuv420p
AO: [pulse] 48000Hz stereo 2ch float
AV: 00:00:00 / 00:00:30 (1%) A-V:  0.409 Dropped: 8

Audio/Video desynchronisation detected! Possible reasons include too slow
hardware, temporary CPU spikes, broken drivers, and broken files. Audio
position will not match to the video (see A-V status field).

AV: 00:00:30 / 00:00:30 (99%) A-V:  0.000 Dropped: 592


Exiting... (End of file)



Ahhh là ça parle !! maintenant il faut que je comprenne quel langue parler..out.gif

#25 Re : Multimédia » [RESOLU] vlc ne lis pas les video .mov » 02-10-2019 12:37:38

smolski a écrit :

Salut guyzmo,

Sur le forum il faut bien séparer les commandes de leurs retours comme toto l'a fait dans tes posts précédents, voir le tuto :
Voir le tuto : Le code, ça pique moins les yeux en couleur

Force et courage



Modification faites sur tout les postes , c'est en faisant des erreurs que l'on apprend, et en lisant les tutos adéquats big_smile Encore désolé .Merci

Pied de page des forums

Propulsé par FluxBB