Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#1 20-11-2015 09:55:14

golgot200
Membre
Lieu : AIN
Distrib. : Debian Jessie
Noyau : Linux debian 3.16.0-4-amd64
(G)UI : MATE
Inscription : 05-08-2007

Comprendre les messages dans le kern.log

Bonjour,


Linux debian 4.2.0-0.bpo.1-amd64 #1 SMP Debian 4.2.6-1~bpo8+1 (2015-11-18) x86_64 GNU/Linux
 



je cherche à bien interpréter les messages suivants. Je n'ai pas de plantage et le pc tourne bien pour moi. C'est juste pour comprendre ces quelques messages :



Nov 19 20:01:21 debian kernel: [   15.013721] nvidia: module license 'NVIDIA' taints kernel.
Nov 19 20:01:21 debian kernel: [   15.013726] Disabling lock debugging due to kernel taint

-------------------------------------------------------------------------------------------------------------------------------------------------------

Nov 20 08:00:59 debian kernel: [    0.195413] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
Nov 20 08:00:59 debian kernel: [    0.195418] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
Nov 20 08:00:59 debian kernel: [    0.195423] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
Nov 20 08:00:59 debian kernel: [    0.195462] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge

-------------------------------------------------------------------------------------------------------------------------------------------------------

Nov 20 08:00:59 debian kernel: [   13.816038] EDAC amd64: DRAM ECC disabled.
Nov 20 08:00:59 debian kernel: [   13.816042] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Nov 20 08:00:59 debian kernel: [   13.816042]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
Nov 20 08:00:59 debian kernel: [   13.816042]  (Note that use of the override may cause unknown side effects.)
Nov 20 08:00:59 debian kernel: [   13.824760] i2c i2c-0: nForce2 SMBus adapter at 0x1c00
Nov 20 08:00:59 debian kernel: [   13.824764] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C7F conflicts with OpRegion 0x0000000000001C40-0x0000000000001C45 (\_SB_.PCI0.SM01) (20150619/utaddress-254)
Nov 20 08:00:59 debian kernel: [   13.824769] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C7F conflicts with OpRegion 0x0000000000001C40-0x0000000000001C45 (\_SB_.PCI0.SM00) (20150619/utaddress-254)
Nov 20 08:00:59 debian kernel: [   13.824773] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
 




J'ai flashé le bios qui m'en a éliminé pas mal, mais reste ceux ci dessus.
Merci par avance wink

Dernière modification par golgot200 (20-11-2015 09:56:35)


L'ultime question ... l'intelligence a besoin de la bêtise pour s'affirmer, la beauté a besoin de la laideur pour resplendir, le courage nait dans la peur, les forts impressionnent au millieu des faibles, mais au final,... qui a donc besoin d'autant de connards ?

Hors ligne

#2 20-11-2015 10:18:40

Severian
Membre
Distrib. : Debian GNU/Linux 8.6 (jessie)
Noyau : Linux 4.6.0-0.bpo.1-amd64
(G)UI : Openbox 3.6.1-2
Inscription : 13-12-2014

Re : Comprendre les messages dans le kern.log

mémoire vive ECC , les barrettes de mémoire ECC (Error Correction Coding ou Error Checking and Correcting) sont des mémoires possédant plusieurs bits dédiés à la correction d'erreur (on les appelle ainsi bits de contrôle). Ces barrettes, utilisées principalement dans les serveurs, permettent de détecter les erreurs et de les corriger.



donc je suppose que tes barrettes mémoires, ou ta carte mère ne gère pas les contrôles ECC


"il est urgent d'attendre" (bendia)
ob3-debian2-150x50.png

Hors ligne

#3 20-11-2015 12:23:33

robert2a
Membre
Lieu : France
Distrib. : Stretch
Noyau : Linux 4.8.0-1-amd64
(G)UI : Mate 1.16.1
Inscription : 15-11-2014

Re : Comprendre les messages dans le kern.log

pour acpi  ASPM => https://en.wikipedia.org/wiki/Active_St … Management

pour la memoire le kernel cherche a utiliser la memoire ECC , sur mes 2 serveurs j ai le meme et pourtant compatible mais pas les sous hmm , j ai de la ddr3 normale et ECC desactivé dans le bios.

pour le premier Nvidia c est une license , tu a un driver non-free ?

Dernière modification par robert2a (20-11-2015 12:24:39)

Hors ligne

#4 20-11-2015 12:57:31

golgot200
Membre
Lieu : AIN
Distrib. : Debian Jessie
Noyau : Linux debian 3.16.0-4-amd64
(G)UI : MATE
Inscription : 05-08-2007

Re : Comprendre les messages dans le kern.log

Bonjour et merci à vous deux.

Je reviens vers vous pour vos questions après avoir fait une installation en minimale de Jessie (Mate). wink

Dernière modification par golgot200 (20-11-2015 12:57:54)


L'ultime question ... l'intelligence a besoin de la bêtise pour s'affirmer, la beauté a besoin de la laideur pour resplendir, le courage nait dans la peur, les forts impressionnent au millieu des faibles, mais au final,... qui a donc besoin d'autant de connards ?

Hors ligne

#5 20-11-2015 15:17:12

golgot200
Membre
Lieu : AIN
Distrib. : Debian Jessie
Noyau : Linux debian 3.16.0-4-amd64
(G)UI : MATE
Inscription : 05-08-2007

Re : Comprendre les messages dans le kern.log

Bon là je crise tongue

Je récupère le CD netinstall sur le site, je grave et commence une installation toute neuve et paf message aussi sec :


0.440769 ACPI [package] has zero element ( ffff8800bf69c0)
 



qu'est qu'il faut faire de suite ou après l'installation, les paquets à rajouter ou une configuration à modifier.

j'ai installé acpi-support amd64-microde et firmware-linux-nonfree mais nada

Dernière modification par golgot200 (20-11-2015 15:17:42)


L'ultime question ... l'intelligence a besoin de la bêtise pour s'affirmer, la beauté a besoin de la laideur pour resplendir, le courage nait dans la peur, les forts impressionnent au millieu des faibles, mais au final,... qui a donc besoin d'autant de connards ?

Hors ligne

#6 20-11-2015 16:18:59

vv222
Membre
Lieu : Bretagne
Distrib. : GNU/Linux Debian « Sid »
Noyau : >= Linux 4.5.0 (amd64)
(G)UI : Openbox + ROX
Inscription : 18-11-2013
Site Web

Re : Comprendre les messages dans le kern.log

Un peu de doc au sujet du premier message :
Tainted kernel (www.novell.com)

Jouer sous Debian ? Facile !

Hors ligne

#7 20-11-2015 16:31:33

golgot200
Membre
Lieu : AIN
Distrib. : Debian Jessie
Noyau : Linux debian 3.16.0-4-amd64
(G)UI : MATE
Inscription : 05-08-2007

Re : Comprendre les messages dans le kern.log

Merci vv222

Pour ce qui est de :


0.440769 ACPI [package] has zero element ( ffff8800bf69c0)
 



C'est réglé par l'installation du kernel 4.2 des backports. C'est déjà une bonne chose avant de revenir à nos moutons tongue


L'ultime question ... l'intelligence a besoin de la bêtise pour s'affirmer, la beauté a besoin de la laideur pour resplendir, le courage nait dans la peur, les forts impressionnent au millieu des faibles, mais au final,... qui a donc besoin d'autant de connards ?

Hors ligne

#8 20-11-2015 16:56:12

robert2a
Membre
Lieu : France
Distrib. : Stretch
Noyau : Linux 4.8.0-1-amd64
(G)UI : Mate 1.16.1
Inscription : 15-11-2014

Re : Comprendre les messages dans le kern.log

golgot200 a écrit :



j'ai installé acpi-support amd64-microde et firmware-linux-nonfree mais nada



toi aussi amd te fais des miseres tongue
tu installe une nouvelle machine ?
acpi-support c est pour les portables , pc fixe c est acpi-support-base plutot

Hors ligne

#9 20-11-2015 18:33:38

golgot200
Membre
Lieu : AIN
Distrib. : Debian Jessie
Noyau : Linux debian 3.16.0-4-amd64
(G)UI : MATE
Inscription : 05-08-2007

Re : Comprendre les messages dans le kern.log

robert2a a écrit :


toi aussi amd te fais des miseres tongue



Oui smile

robert2a a écrit :


tu installe une nouvelle machine ?



Une machine que je remet dans le circuit dont je ne connais pas le matos (comme l Athlon)


apt-get install amd64-microcode firmware-linux-nonfree
 



robert2a a écrit :


acpi-support c est pour les portables , pc fixe c est acpi-support-base plutot



Oups .... merci !!!


apt-get remove --purge acpi-support
apt-get autoremove --purge
 



Virer en urgence pulseaudio tongue


apt-get remove --purge pulseaudio pulseaudio-utils mate-settings-daemon-pulse
 



Installer alsa-utils


apt-get install alsa-utils
 



Je crée un fichier .asoundrc dans mon home car j'ai la CARD 0 qui la sortie HDMI de ma Geforce qui prend la main
J'aurai pu blacklister la chose etc mais je veux simple pour l'instant.

OK

Je retournerai dans les logs après.
Je vais bien réussir à dompter la bête.
Pour l'instant, je reste sur nouveau, mate-core, lightdm, alsa et je teste un peu.

Dernière modification par golgot200 (20-11-2015 18:42:06)


L'ultime question ... l'intelligence a besoin de la bêtise pour s'affirmer, la beauté a besoin de la laideur pour resplendir, le courage nait dans la peur, les forts impressionnent au millieu des faibles, mais au final,... qui a donc besoin d'autant de connards ?

Hors ligne

#10 20-11-2015 19:50:22

golgot200
Membre
Lieu : AIN
Distrib. : Debian Jessie
Noyau : Linux debian 3.16.0-4-amd64
(G)UI : MATE
Inscription : 05-08-2007

Re : Comprendre les messages dans le kern.log

Bon, j'en suis là, si quelqu'un trouve quelque chose de louche :


Nov 20 18:47:11 debian kernel: [    0.000000] Initializing cgroup subsys cpuset
Nov 20 18:47:11 debian kernel: [    0.000000] Initializing cgroup subsys cpu
Nov 20 18:47:11 debian kernel: [    0.000000] Initializing cgroup subsys cpuacct
Nov 20 18:47:11 debian kernel: [    0.000000] Linux version 4.2.0-0.bpo.1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP Debian 4.2.6-1~bpo8+1 (2015-11-18)
Nov 20 18:47:11 debian kernel: [    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.2.0-0.bpo.1-amd64 root=UUID=2f59cbb1-36d4-49a1-b29e-7217e40949f2 ro quiet
Nov 20 18:47:11 debian kernel: [    0.000000] tseg: 00bff00000
Nov 20 18:47:11 debian kernel: [    0.000000] x86/fpu: Legacy x87 FPU detected.
Nov 20 18:47:11 debian kernel: [    0.000000] x86/fpu: Using 'lazy' FPU context switches.
Nov 20 18:47:11 debian kernel: [    0.000000] e820: BIOS-provided physical RAM map:
Nov 20 18:47:11 debian kernel: [    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
Nov 20 18:47:11 debian kernel: [    0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
Nov 20 18:47:11 debian kernel: [    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
Nov 20 18:47:11 debian kernel: [    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bfedffff] usable
Nov 20 18:47:11 debian kernel: [    0.000000] BIOS-e820: [mem 0x00000000bfee0000-0x00000000bfee2fff] ACPI NVS
Nov 20 18:47:11 debian kernel: [    0.000000] BIOS-e820: [mem 0x00000000bfee3000-0x00000000bfeeffff] ACPI data
Nov 20 18:47:11 debian kernel: [    0.000000] BIOS-e820: [mem 0x00000000bfef0000-0x00000000bfefffff] reserved
Nov 20 18:47:11 debian kernel: [    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
Nov 20 18:47:11 debian kernel: [    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
Nov 20 18:47:11 debian kernel: [    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
Nov 20 18:47:11 debian kernel: [    0.000000] NX (Execute Disable) protection: active
Nov 20 18:47:11 debian kernel: [    0.000000] SMBIOS 2.4 present.
Nov 20 18:47:11 debian kernel: [    0.000000] DMI: System manufacturer System Product Name/CROSSHAIR, BIOS ASUS CROSSHAIR ACPI BIOS Revision 1207 08/26/2008
Nov 20 18:47:11 debian kernel: [    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
Nov 20 18:47:11 debian kernel: [    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
Nov 20 18:47:11 debian kernel: [    0.000000] AGP: No AGP bridge found
Nov 20 18:47:11 debian kernel: [    0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
Nov 20 18:47:11 debian kernel: [    0.000000] MTRR default type: uncachable
Nov 20 18:47:11 debian kernel: [    0.000000] MTRR fixed ranges enabled:
Nov 20 18:47:11 debian kernel: [    0.000000]   00000-9FFFF write-back
Nov 20 18:47:11 debian kernel: [    0.000000]   A0000-BFFFF uncachable
Nov 20 18:47:11 debian kernel: [    0.000000]   C0000-C7FFF write-protect
Nov 20 18:47:11 debian kernel: [    0.000000]   C8000-FFFFF uncachable
Nov 20 18:47:11 debian kernel: [    0.000000] MTRR variable ranges enabled:
Nov 20 18:47:11 debian kernel: [    0.000000]   0 base 0000000000 mask FF80000000 write-back
Nov 20 18:47:11 debian kernel: [    0.000000]   1 base 0080000000 mask FFC0000000 write-back
Nov 20 18:47:11 debian kernel: [    0.000000]   2 base 00BFF00000 mask FFFFF00000 uncachable
Nov 20 18:47:11 debian kernel: [    0.000000]   3 base 0100000000 mask FFC0000000 write-back
Nov 20 18:47:11 debian kernel: [    0.000000]   4 disabled
Nov 20 18:47:11 debian kernel: [    0.000000]   5 disabled
Nov 20 18:47:11 debian kernel: [    0.000000]   6 disabled
Nov 20 18:47:11 debian kernel: [    0.000000]   7 disabled
Nov 20 18:47:11 debian kernel: [    0.000000] TOM2: 0000000140000000 aka 5120M
Nov 20 18:47:11 debian kernel: [    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
Nov 20 18:47:11 debian kernel: [    0.000000] e820: update [mem 0xbff00000-0xffffffff] usable ==> reserved
Nov 20 18:47:11 debian kernel: [    0.000000] e820: last_pfn = 0xbfee0 max_arch_pfn = 0x400000000
Nov 20 18:47:11 debian kernel: [    0.000000] found SMP MP-table at [mem 0x000f6530-0x000f653f] mapped at [ffff8800000f6530]
Nov 20 18:47:11 debian kernel: [    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
Nov 20 18:47:11 debian kernel: [    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
Nov 20 18:47:11 debian kernel: [    0.000000]  [mem 0x00000000-0x000fffff] page 4k
Nov 20 18:47:11 debian kernel: [    0.000000] BRK [0x01d2d000, 0x01d2dfff] PGTABLE
Nov 20 18:47:11 debian kernel: [    0.000000] BRK [0x01d2e000, 0x01d2efff] PGTABLE
Nov 20 18:47:11 debian kernel: [    0.000000] BRK [0x01d2f000, 0x01d2ffff] PGTABLE
Nov 20 18:47:11 debian kernel: [    0.000000] init_memory_mapping: [mem 0x13fe00000-0x13fffffff]
Nov 20 18:47:11 debian kernel: [    0.000000]  [mem 0x13fe00000-0x13fffffff] page 2M
Nov 20 18:47:11 debian kernel: [    0.000000] BRK [0x01d30000, 0x01d30fff] PGTABLE
Nov 20 18:47:11 debian kernel: [    0.000000] init_memory_mapping: [mem 0x120000000-0x13fdfffff]
Nov 20 18:47:11 debian kernel: [    0.000000]  [mem 0x120000000-0x13fdfffff] page 2M
Nov 20 18:47:11 debian kernel: [    0.000000] init_memory_mapping: [mem 0x00100000-0xbfedffff]
Nov 20 18:47:11 debian kernel: [    0.000000]  [mem 0x00100000-0x001fffff] page 4k
Nov 20 18:47:11 debian kernel: [    0.000000]  [mem 0x00200000-0xbfdfffff] page 2M
Nov 20 18:47:11 debian kernel: [    0.000000]  [mem 0xbfe00000-0xbfedffff] page 4k
Nov 20 18:47:11 debian kernel: [    0.000000] init_memory_mapping: [mem 0x100000000-0x11fffffff]
Nov 20 18:47:11 debian kernel: [    0.000000]  [mem 0x100000000-0x11fffffff] page 2M
Nov 20 18:47:11 debian kernel: [    0.000000] RAMDISK: [mem 0x36144000-0x37099fff]
Nov 20 18:47:11 debian kernel: [    0.000000] ACPI: Early table checksum verification disabled
Nov 20 18:47:11 debian kernel: [    0.000000] ACPI: RSDP 0x00000000000F82E0 000024 (v02 Nvidia)
Nov 20 18:47:11 debian kernel: [    0.000000] ACPI: XSDT 0x00000000BFEE3100 00004C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
Nov 20 18:47:11 debian kernel: [    0.000000] ACPI: FACP 0x00000000BFEEBA80 0000F4 (v03 Nvidia ASUSACPI 42302E31 AWRD 00000000)
Nov 20 18:47:11 debian kernel: [    0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aEventBlock: 32/8 (20150619/tbfadt-623)
Nov 20 18:47:11 debian kernel: [    0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/8 (20150619/tbfadt-623)
Nov 20 18:47:11 debian kernel: [    0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/PmTimerBlock: 32/8 (20150619/tbfadt-623)
Nov 20 18:47:11 debian kernel: [    0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/8 (20150619/tbfadt-623)
Nov 20 18:47:11 debian kernel: [    0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe1Block: 128/8 (20150619/tbfadt-623)
Nov 20 18:47:11 debian kernel: [    0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aEventBlock: 8, using default 32 (20150619/tbfadt-704)
Nov 20 18:47:11 debian kernel: [    0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 8, using default 16 (20150619/tbfadt-704)
Nov 20 18:47:11 debian kernel: [    0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/PmTimerBlock: 8, using default 32 (20150619/tbfadt-704)
Nov 20 18:47:11 debian kernel: [    0.000000] ACPI: DSDT 0x00000000BFEE3280 008786 (v01 NVIDIA AWRDACPI 00001000 MSFT 03000000)
Nov 20 18:47:11 debian kernel: [    0.000000] ACPI: FACS 0x00000000BFEE0000 000040
Nov 20 18:47:11 debian kernel: [    0.000000] ACPI: FACS 0x00000000BFEE0000 000040
Nov 20 18:47:11 debian kernel: [    0.000000] ACPI: SSDT 0x00000000BFEEBCC0 00030E (v01 PTLTD  POWERNOW 00000001  LTP 00000001)
Nov 20 18:47:11 debian kernel: [    0.000000] ACPI: HPET 0x00000000BFEEC040 000038 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000098)
Nov 20 18:47:11 debian kernel: [    0.000000] ACPI: MCFG 0x00000000BFEEC0C0 00003C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
Nov 20 18:47:11 debian kernel: [    0.000000] ACPI: APIC 0x00000000BFEEBBC0 000098 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
Nov 20 18:47:11 debian kernel: [    0.000000] ACPI: Local APIC address 0xfee00000
Nov 20 18:47:11 debian kernel: [    0.000000] Scanning NUMA topology in Northbridge 24
Nov 20 18:47:11 debian kernel: [    0.000000] No NUMA configuration found
Nov 20 18:47:11 debian kernel: [    0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
Nov 20 18:47:11 debian kernel: [    0.000000] NODE_DATA(0) allocated [mem 0x13fff9000-0x13fffcfff]
Nov 20 18:47:11 debian kernel: [    0.000000]  [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013b600000-ffff88013f5fffff] on node 0
Nov 20 18:47:11 debian kernel: [    0.000000] Zone ranges:
Nov 20 18:47:11 debian kernel: [    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
Nov 20 18:47:11 debian kernel: [    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
Nov 20 18:47:11 debian kernel: [    0.000000]   Normal   [mem 0x0000000100000000-0x000000013fffffff]
Nov 20 18:47:11 debian kernel: [    0.000000] Movable zone start for each node
Nov 20 18:47:11 debian kernel: [    0.000000] Early memory node ranges
Nov 20 18:47:11 debian kernel: [    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
Nov 20 18:47:11 debian kernel: [    0.000000]   node   0: [mem 0x0000000000100000-0x00000000bfedffff]
Nov 20 18:47:11 debian kernel: [    0.000000]   node   0: [mem 0x0000000100000000-0x000000013fffffff]
Nov 20 18:47:11 debian kernel: [    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff]
Nov 20 18:47:11 debian kernel: [    0.000000] On node 0 totalpages: 1048190
Nov 20 18:47:11 debian kernel: [    0.000000]   DMA zone: 64 pages used for memmap
Nov 20 18:47:11 debian kernel: [    0.000000]   DMA zone: 21 pages reserved
Nov 20 18:47:11 debian kernel: [    0.000000]   DMA zone: 3998 pages, LIFO batch:0
Nov 20 18:47:11 debian kernel: [    0.000000]   DMA32 zone: 12220 pages used for memmap
Nov 20 18:47:11 debian kernel: [    0.000000]   DMA32 zone: 782048 pages, LIFO batch:31
Nov 20 18:47:11 debian kernel: [    0.000000]   Normal zone: 4096 pages used for memmap
Nov 20 18:47:11 debian kernel: [    0.000000]   Normal zone: 262144 pages, LIFO batch:31
Nov 20 18:47:11 debian kernel: [    0.000000] Detected use of extended apic ids on hypertransport bus
Nov 20 18:47:11 debian kernel: [    0.000000] ACPI: PM-Timer IO Port: 0x1008
Nov 20 18:47:11 debian kernel: [    0.000000] ACPI: Local APIC address 0xfee00000
Nov 20 18:47:11 debian kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Nov 20 18:47:11 debian kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Nov 20 18:47:11 debian kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
Nov 20 18:47:11 debian kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
Nov 20 18:47:11 debian kernel: [    0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
Nov 20 18:47:11 debian kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Nov 20 18:47:11 debian kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Nov 20 18:47:11 debian kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
Nov 20 18:47:11 debian kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
Nov 20 18:47:11 debian kernel: [    0.000000] ACPI: IRQ0 used by override.
Nov 20 18:47:11 debian kernel: [    0.000000] ACPI: IRQ9 used by override.
Nov 20 18:47:11 debian kernel: [    0.000000] ACPI: IRQ14 used by override.
Nov 20 18:47:11 debian kernel: [    0.000000] ACPI: IRQ15 used by override.
Nov 20 18:47:11 debian kernel: [    0.000000] Using ACPI (MADT) for SMP configuration information
Nov 20 18:47:11 debian kernel: [    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfefff000
Nov 20 18:47:11 debian kernel: [    0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
Nov 20 18:47:11 debian kernel: [    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
Nov 20 18:47:11 debian kernel: [    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
Nov 20 18:47:11 debian kernel: [    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
Nov 20 18:47:11 debian kernel: [    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
Nov 20 18:47:11 debian kernel: [    0.000000] PM: Registered nosave memory: [mem 0xbfee0000-0xbfee2fff]
Nov 20 18:47:11 debian kernel: [    0.000000] PM: Registered nosave memory: [mem 0xbfee3000-0xbfeeffff]
Nov 20 18:47:11 debian kernel: [    0.000000] PM: Registered nosave memory: [mem 0xbfef0000-0xbfefffff]
Nov 20 18:47:11 debian kernel: [    0.000000] PM: Registered nosave memory: [mem 0xbff00000-0xefffffff]
Nov 20 18:47:11 debian kernel: [    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
Nov 20 18:47:11 debian kernel: [    0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xfebfffff]
Nov 20 18:47:11 debian kernel: [    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
Nov 20 18:47:11 debian kernel: [    0.000000] e820: [mem 0xbff00000-0xefffffff] available for PCI devices
Nov 20 18:47:11 debian kernel: [    0.000000] Booting paravirtualized kernel on bare hardware
Nov 20 18:47:11 debian kernel: [    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
Nov 20 18:47:11 debian kernel: [    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
Nov 20 18:47:11 debian kernel: [    0.000000] PERCPU: Embedded 32 pages/cpu @ffff88013fc00000 s92696 r8192 d30184 u524288
Nov 20 18:47:11 debian kernel: [    0.000000] pcpu-alloc: s92696 r8192 d30184 u524288 alloc=1*2097152
Nov 20 18:47:11 debian kernel: [    0.000000] pcpu-alloc: [0] 0 1 2 3
Nov 20 18:47:11 debian kernel: [    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1031789
Nov 20 18:47:11 debian kernel: [    0.000000] Policy zone: Normal
Nov 20 18:47:11 debian kernel: [    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.2.0-0.bpo.1-amd64 root=UUID=2f59cbb1-36d4-49a1-b29e-7217e40949f2 ro quiet
Nov 20 18:47:11 debian kernel: [    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
Nov 20 18:47:11 debian kernel: [    0.000000] AGP: Checking aperture...
Nov 20 18:47:11 debian kernel: [    0.000000] AGP: No AGP bridge found
Nov 20 18:47:11 debian kernel: [    0.000000] AGP: Node 0: aperture [bus addr 0xb4000000-0xb5ffffff] (32MB)
Nov 20 18:47:11 debian kernel: [    0.000000] Aperture pointing to e820 RAM. Ignoring.
Nov 20 18:47:11 debian kernel: [    0.000000] AGP: Your BIOS doesn't leave an aperture memory hole
Nov 20 18:47:11 debian kernel: [    0.000000] AGP: Please enable the IOMMU option in the BIOS setup
Nov 20 18:47:11 debian kernel: [    0.000000] AGP: This costs you 64MB of RAM
Nov 20 18:47:11 debian kernel: [    0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB)
Nov 20 18:47:11 debian kernel: [    0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
Nov 20 18:47:11 debian kernel: [    0.000000] Memory: 3965544K/4192760K available (5493K kernel code, 1094K rwdata, 2740K rodata, 1292K init, 832K bss, 227216K reserved, 0K cma-reserved)
Nov 20 18:47:11 debian kernel: [    0.000000] Hierarchical RCU implementation.
Nov 20 18:47:11 debian kernel: [    0.000000]   Build-time adjustment of leaf fanout to 64.
Nov 20 18:47:11 debian kernel: [    0.000000]   RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
Nov 20 18:47:11 debian kernel: [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
Nov 20 18:47:11 debian kernel: [    0.000000] NR_IRQS:33024 nr_irqs:456 16
Nov 20 18:47:11 debian kernel: [    0.000000] spurious 8259A interrupt: IRQ7.
Nov 20 18:47:11 debian kernel: [    0.000000] Console: colour VGA+ 80x25
Nov 20 18:47:11 debian kernel: [    0.000000] console [tty0] enabled
Nov 20 18:47:11 debian kernel: [    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns
Nov 20 18:47:11 debian kernel: [    0.000000] hpet clockevent registered
Nov 20 18:47:11 debian kernel: [    0.000000] tsc: Fast TSC calibration using PIT
Nov 20 18:47:11 debian kernel: [    0.000000] tsc: Detected 3013.786 MHz processor
Nov 20 18:47:11 debian kernel: [    0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized
Nov 20 18:47:11 debian kernel: [    0.004011] Calibrating delay loop (skipped), value calculated using timer frequency.. 6027.57 BogoMIPS (lpj=12055144)
Nov 20 18:47:11 debian kernel: [    0.004014] pid_max: default: 32768 minimum: 301
Nov 20 18:47:11 debian kernel: [    0.004022] ACPI: Core revision 20150619
Nov 20 18:47:11 debian kernel: [    0.013710] ACPI: All ACPI Tables successfully acquired
Nov 20 18:47:11 debian kernel: [    0.013744] Security Framework initialized
Nov 20 18:47:11 debian kernel: [    0.013747] AppArmor: AppArmor disabled by boot time parameter
Nov 20 18:47:11 debian kernel: [    0.013748] Yama: disabled by default; enable with sysctl kernel.yama.*
Nov 20 18:47:11 debian kernel: [    0.014042] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Nov 20 18:47:11 debian kernel: [    0.015714] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Nov 20 18:47:11 debian kernel: [    0.016655] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Nov 20 18:47:11 debian kernel: [    0.016661] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Nov 20 18:47:11 debian kernel: [    0.016954] Initializing cgroup subsys blkio
Nov 20 18:47:11 debian kernel: [    0.016958] Initializing cgroup subsys memory
Nov 20 18:47:11 debian kernel: [    0.016965] Initializing cgroup subsys devices
Nov 20 18:47:11 debian kernel: [    0.016968] Initializing cgroup subsys freezer
Nov 20 18:47:11 debian kernel: [    0.016971] Initializing cgroup subsys net_cls
Nov 20 18:47:11 debian kernel: [    0.016975] Initializing cgroup subsys perf_event
Nov 20 18:47:11 debian kernel: [    0.016978] Initializing cgroup subsys net_prio
Nov 20 18:47:11 debian kernel: [    0.017000] CPU: Physical Processor ID: 0
Nov 20 18:47:11 debian kernel: [    0.017001] CPU: Processor Core ID: 0
Nov 20 18:47:11 debian kernel: [    0.017003] mce: CPU supports 5 MCE banks
Nov 20 18:47:11 debian kernel: [    0.017009] LVT offset 0 assigned for vector 0xf9
Nov 20 18:47:11 debian kernel: [    0.017011] process: using AMD E400 aware idle routine
Nov 20 18:47:11 debian kernel: [    0.017013] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
Nov 20 18:47:11 debian kernel: [    0.017015] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
Nov 20 18:47:11 debian kernel: [    0.017210] Freeing SMP alternatives memory: 20K (ffffffff81c56000 - ffffffff81c5b000)
Nov 20 18:47:11 debian kernel: [    0.019897] ftrace: allocating 23146 entries in 91 pages
Nov 20 18:47:11 debian kernel: [    0.024620] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Nov 20 18:47:11 debian kernel: [    0.068000] smpboot: CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ (fam: 0f, model: 43, stepping: 03)
Nov 20 18:47:11 debian kernel: [    0.068000] Performance Events: AMD PMU driver.
Nov 20 18:47:11 debian kernel: [    0.068000] ... version:                0
Nov 20 18:47:11 debian kernel: [    0.068000] ... bit width:              48
Nov 20 18:47:11 debian kernel: [    0.068000] ... generic registers:      4
Nov 20 18:47:11 debian kernel: [    0.068000] ... value mask:             0000ffffffffffff
Nov 20 18:47:11 debian kernel: [    0.068000] ... max period:             00007fffffffffff
Nov 20 18:47:11 debian kernel: [    0.068000] ... fixed-purpose events:   0
Nov 20 18:47:11 debian kernel: [    0.068000] ... event mask:             000000000000000f
Nov 20 18:47:11 debian kernel: [    0.068000] x86: Booting SMP configuration:
Nov 20 18:47:11 debian kernel: [    0.068000] .... node  #0, CPUs:      #1
Nov 20 18:47:11 debian kernel: [    0.068204] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
Nov 20 18:47:11 debian kernel: [    0.144060] x86: Booted up 1 node, 2 CPUs
Nov 20 18:47:11 debian kernel: [    0.144062] smpboot: Total of 2 processors activated (12055.01 BogoMIPS)
Nov 20 18:47:11 debian kernel: [    0.144585] devtmpfs: initialized
Nov 20 18:47:11 debian kernel: [    0.149010] PM: Registering ACPI NVS region [mem 0xbfee0000-0xbfee2fff] (12288 bytes)
Nov 20 18:47:11 debian kernel: [    0.149010] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
Nov 20 18:47:11 debian kernel: [    0.149010] pinctrl core: initialized pinctrl subsystem
Nov 20 18:47:11 debian kernel: [    0.149010] NET: Registered protocol family 16
Nov 20 18:47:11 debian kernel: [    0.160004] cpuidle: using governor ladder
Nov 20 18:47:11 debian kernel: [    0.172003] cpuidle: using governor menu
Nov 20 18:47:11 debian kernel: [    0.172015] node 0 link 0: io port [8000, ffff]
Nov 20 18:47:11 debian kernel: [    0.172017] TOM: 00000000c0000000 aka 3072M
Nov 20 18:47:11 debian kernel: [    0.172019] node 0 link 0: mmio [a0000, bffff]
Nov 20 18:47:11 debian kernel: [    0.172022] node 0 link 0: mmio [c0000000, efffffff]
Nov 20 18:47:11 debian kernel: [    0.172023] node 0 link 0: mmio [f4000000, fe02ffff]
Nov 20 18:47:11 debian kernel: [    0.172025] node 0 link 0: mmio [f0000000, f05fffff]
Nov 20 18:47:11 debian kernel: [    0.172026] TOM2: 0000000140000000 aka 5120M
Nov 20 18:47:11 debian kernel: [    0.172028] bus: [bus 00-05] on node 0 link 0
Nov 20 18:47:11 debian kernel: [    0.172030] bus: 00 [io  0x0000-0xffff]
Nov 20 18:47:11 debian kernel: [    0.172031] bus: 00 [mem 0x000a0000-0x000bffff]
Nov 20 18:47:11 debian kernel: [    0.172032] bus: 00 [mem 0xc0000000-0xf3ffffff]
Nov 20 18:47:11 debian kernel: [    0.172033] bus: 00 [mem 0xf4000000-0xffffffff]
Nov 20 18:47:11 debian kernel: [    0.172035] bus: 00 [mem 0x140000000-0xfcffffffff]
Nov 20 18:47:11 debian kernel: [    0.172090] ACPI: bus type PCI registered
Nov 20 18:47:11 debian kernel: [    0.172092] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
Nov 20 18:47:11 debian kernel: [    0.172178] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
Nov 20 18:47:11 debian kernel: [    0.172180] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
Nov 20 18:47:11 debian kernel: [    0.172186] PCI: Using configuration type 1 for base access
Nov 20 18:47:11 debian kernel: [    0.172361] mtrr: your CPUs had inconsistent variable MTRR settings
Nov 20 18:47:11 debian kernel: [    0.172362] mtrr: probably your BIOS does not setup all CPUs.
Nov 20 18:47:11 debian kernel: [    0.172363] mtrr: corrected configuration.
Nov 20 18:47:11 debian kernel: [    0.184057] ACPI: Added _OSI(Module Device)
Nov 20 18:47:11 debian kernel: [    0.184058] ACPI: Added _OSI(Processor Device)
Nov 20 18:47:11 debian kernel: [    0.184060] ACPI: Added _OSI(3.0 _SCP Extensions)
Nov 20 18:47:11 debian kernel: [    0.184061] ACPI: Added _OSI(Processor Aggregator Device)
Nov 20 18:47:11 debian kernel: [    0.189791] ACPI: Interpreter enabled
Nov 20 18:47:11 debian kernel: [    0.189800] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580)
Nov 20 18:47:11 debian kernel: [    0.189813] ACPI: (supports S0 S1 S3 S4 S5)
Nov 20 18:47:11 debian kernel: [    0.189814] ACPI: Using IOAPIC for interrupt routing
Nov 20 18:47:11 debian kernel: [    0.189837] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
Nov 20 18:47:11 debian kernel: [    0.195739] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
Nov 20 18:47:11 debian kernel: [    0.195745] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
Nov 20 18:47:11 debian kernel: [    0.195749] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
Nov 20 18:47:11 debian kernel: [    0.195789] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
Nov 20 18:47:11 debian kernel: [    0.195972] PCI host bridge to bus 0000:00
Nov 20 18:47:11 debian kernel: [    0.195975] pci_bus 0000:00: root bus resource [bus 00-ff]
Nov 20 18:47:11 debian kernel: [    0.195977] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
Nov 20 18:47:11 debian kernel: [    0.195979] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
Nov 20 18:47:11 debian kernel: [    0.195981] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
Nov 20 18:47:11 debian kernel: [    0.195983] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
Nov 20 18:47:11 debian kernel: [    0.195985] pci_bus 0000:00: root bus resource [mem 0xbff00000-0xfebfffff window]
Nov 20 18:47:11 debian kernel: [    0.195992] pci 0000:00:00.0: [10de:02f4] type 00 class 0x050000
Nov 20 18:47:11 debian kernel: [    0.196091] pci 0000:00:00.1: [10de:02fa] type 00 class 0x050000
Nov 20 18:47:11 debian kernel: [    0.196172] pci 0000:00:00.2: [10de:02fe] type 00 class 0x050000
Nov 20 18:47:11 debian kernel: [    0.196258] pci 0000:00:00.3: [10de:02f8] type 00 class 0x050000
Nov 20 18:47:11 debian kernel: [    0.196343] pci 0000:00:00.4: [10de:02f9] type 00 class 0x050000
Nov 20 18:47:11 debian kernel: [    0.196434] pci 0000:00:00.5: [10de:02ff] type 00 class 0x050000
Nov 20 18:47:11 debian kernel: [    0.196521] pci 0000:00:00.6: [10de:027f] type 00 class 0x050000
Nov 20 18:47:11 debian kernel: [    0.196603] pci 0000:00:00.7: [10de:027e] type 00 class 0x050000
Nov 20 18:47:11 debian kernel: [    0.196692] pci 0000:00:04.0: [10de:02fb] type 01 class 0x060400
Nov 20 18:47:11 debian kernel: [    0.196714] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
Nov 20 18:47:11 debian kernel: [    0.196763] pci 0000:00:04.0: System wakeup disabled by ACPI
Nov 20 18:47:11 debian kernel: [    0.196812] pci 0000:00:08.0: [10de:0369] type 00 class 0x050000
Nov 20 18:47:11 debian kernel: [    0.197024] pci 0000:00:09.0: [10de:0360] type 00 class 0x060100
Nov 20 18:47:11 debian kernel: [    0.197125] pci 0000:00:09.1: [10de:0368] type 00 class 0x0c0500
Nov 20 18:47:11 debian kernel: [    0.197157] pci 0000:00:09.1: reg 0x20: [io  0x1c00-0x1c3f]
Nov 20 18:47:11 debian kernel: [    0.197163] pci 0000:00:09.1: reg 0x24: [io  0x1c40-0x1c7f]
Nov 20 18:47:11 debian kernel: [    0.197183] pci 0000:00:09.1: PME# supported from D3hot D3cold
Nov 20 18:47:11 debian kernel: [    0.197271] pci 0000:00:0a.0: [10de:036c] type 00 class 0x0c0310
Nov 20 18:47:11 debian kernel: [    0.197282] pci 0000:00:0a.0: reg 0x10: [mem 0xfe02f000-0xfe02ffff]
Nov 20 18:47:11 debian kernel: [    0.197310] pci 0000:00:0a.0: supports D1 D2
Nov 20 18:47:11 debian kernel: [    0.197312] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
Nov 20 18:47:11 debian kernel: [    0.197359] pci 0000:00:0a.0: System wakeup disabled by ACPI
Nov 20 18:47:11 debian kernel: [    0.197397] pci 0000:00:0a.1: [10de:036d] type 00 class 0x0c0320
Nov 20 18:47:11 debian kernel: [    0.197408] pci 0000:00:0a.1: reg 0x10: [mem 0xfe02e000-0xfe02e0ff]
Nov 20 18:47:11 debian kernel: [    0.197435] pci 0000:00:0a.1: supports D1 D2
Nov 20 18:47:11 debian kernel: [    0.197437] pci 0000:00:0a.1: PME# supported from D0 D1 D2 D3hot D3cold
Nov 20 18:47:11 debian kernel: [    0.197494] pci 0000:00:0a.1: System wakeup disabled by ACPI
Nov 20 18:47:11 debian kernel: [    0.197539] pci 0000:00:0c.0: [10de:036e] type 00 class 0x01018a
Nov 20 18:47:11 debian kernel: [    0.197558] pci 0000:00:0c.0: reg 0x20: [io  0xf400-0xf40f]
Nov 20 18:47:11 debian kernel: [    0.197566] pci 0000:00:0c.0: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
Nov 20 18:47:11 debian kernel: [    0.197568] pci 0000:00:0c.0: legacy IDE quirk: reg 0x14: [io  0x03f6]
Nov 20 18:47:11 debian kernel: [    0.197569] pci 0000:00:0c.0: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
Nov 20 18:47:11 debian kernel: [    0.197571] pci 0000:00:0c.0: legacy IDE quirk: reg 0x1c: [io  0x0376]
Nov 20 18:47:11 debian kernel: [    0.197651] pci 0000:00:0d.0: [10de:037f] type 00 class 0x010185
Nov 20 18:47:11 debian kernel: [    0.197663] pci 0000:00:0d.0: reg 0x10: [io  0x09f0-0x09f7]
Nov 20 18:47:11 debian kernel: [    0.197668] pci 0000:00:0d.0: reg 0x14: [io  0x0bf0-0x0bf3]
Nov 20 18:47:11 debian kernel: [    0.197672] pci 0000:00:0d.0: reg 0x18: [io  0x0970-0x0977]
Nov 20 18:47:11 debian kernel: [    0.197676] pci 0000:00:0d.0: reg 0x1c: [io  0x0b70-0x0b73]
Nov 20 18:47:11 debian kernel: [    0.197681] pci 0000:00:0d.0: reg 0x20: [io  0xe000-0xe00f]
Nov 20 18:47:11 debian kernel: [    0.197685] pci 0000:00:0d.0: reg 0x24: [mem 0xfe02d000-0xfe02dfff]
Nov 20 18:47:11 debian kernel: [    0.197771] pci 0000:00:0d.1: [10de:037f] type 00 class 0x010185
Nov 20 18:47:11 debian kernel: [    0.197783] pci 0000:00:0d.1: reg 0x10: [io  0x09e0-0x09e7]
Nov 20 18:47:11 debian kernel: [    0.197787] pci 0000:00:0d.1: reg 0x14: [io  0x0be0-0x0be3]
Nov 20 18:47:11 debian kernel: [    0.197791] pci 0000:00:0d.1: reg 0x18: [io  0x0960-0x0967]
Nov 20 18:47:11 debian kernel: [    0.197796] pci 0000:00:0d.1: reg 0x1c: [io  0x0b60-0x0b63]
Nov 20 18:47:11 debian kernel: [    0.197800] pci 0000:00:0d.1: reg 0x20: [io  0xcc00-0xcc0f]
Nov 20 18:47:11 debian kernel: [    0.197804] pci 0000:00:0d.1: reg 0x24: [mem 0xfe02c000-0xfe02cfff]
Nov 20 18:47:11 debian kernel: [    0.197890] pci 0000:00:0d.2: [10de:037f] type 00 class 0x010185
Nov 20 18:47:11 debian kernel: [    0.197902] pci 0000:00:0d.2: reg 0x10: [io  0xc800-0xc807]
Nov 20 18:47:11 debian kernel: [    0.197906] pci 0000:00:0d.2: reg 0x14: [io  0xc400-0xc403]
Nov 20 18:47:11 debian kernel: [    0.197911] pci 0000:00:0d.2: reg 0x18: [io  0xc000-0xc007]
Nov 20 18:47:11 debian kernel: [    0.197915] pci 0000:00:0d.2: reg 0x1c: [io  0xbc00-0xbc03]
Nov 20 18:47:11 debian kernel: [    0.197919] pci 0000:00:0d.2: reg 0x20: [io  0xb800-0xb80f]
Nov 20 18:47:11 debian kernel: [    0.197924] pci 0000:00:0d.2: reg 0x24: [mem 0xfe02b000-0xfe02bfff]
Nov 20 18:47:11 debian kernel: [    0.198012] pci 0000:00:0e.0: [10de:0370] type 01 class 0x060401
Nov 20 18:47:11 debian kernel: [    0.198077] pci 0000:00:0e.0: System wakeup disabled by ACPI
Nov 20 18:47:11 debian kernel: [    0.198121] pci 0000:00:10.0: [10de:0373] type 00 class 0x068000
Nov 20 18:47:11 debian kernel: [    0.198136] pci 0000:00:10.0: reg 0x10: [mem 0xfe02a000-0xfe02afff]
Nov 20 18:47:11 debian kernel: [    0.198141] pci 0000:00:10.0: reg 0x14: [io  0xb400-0xb407]
Nov 20 18:47:11 debian kernel: [    0.198145] pci 0000:00:10.0: reg 0x18: [mem 0xfe029000-0xfe0290ff]
Nov 20 18:47:11 debian kernel: [    0.198149] pci 0000:00:10.0: reg 0x1c: [mem 0xfe028000-0xfe02800f]
Nov 20 18:47:11 debian kernel: [    0.198171] pci 0000:00:10.0: supports D1 D2
Nov 20 18:47:11 debian kernel: [    0.198173] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
Nov 20 18:47:11 debian kernel: [    0.198222] pci 0000:00:10.0: System wakeup disabled by ACPI
Nov 20 18:47:11 debian kernel: [    0.198260] pci 0000:00:11.0: [10de:0373] type 00 class 0x068000
Nov 20 18:47:11 debian kernel: [    0.198275] pci 0000:00:11.0: reg 0x10: [mem 0xfe027000-0xfe027fff]
Nov 20 18:47:11 debian kernel: [    0.198279] pci 0000:00:11.0: reg 0x14: [io  0xb000-0xb007]
Nov 20 18:47:11 debian kernel: [    0.198284] pci 0000:00:11.0: reg 0x18: [mem 0xfe026000-0xfe0260ff]
Nov 20 18:47:11 debian kernel: [    0.198288] pci 0000:00:11.0: reg 0x1c: [mem 0xfe025000-0xfe02500f]
Nov 20 18:47:11 debian kernel: [    0.198310] pci 0000:00:11.0: supports D1 D2
Nov 20 18:47:11 debian kernel: [    0.198312] pci 0000:00:11.0: PME# supported from D0 D1 D2 D3hot D3cold
Nov 20 18:47:11 debian kernel: [    0.198361] pci 0000:00:11.0: System wakeup disabled by ACPI
Nov 20 18:47:11 debian kernel: [    0.198398] pci 0000:00:12.0: [10de:0376] type 01 class 0x060400
Nov 20 18:47:11 debian kernel: [    0.198423] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
Nov 20 18:47:11 debian kernel: [    0.198471] pci 0000:00:12.0: System wakeup disabled by ACPI
Nov 20 18:47:11 debian kernel: [    0.198510] pci 0000:00:16.0: [10de:0375] type 01 class 0x060400
Nov 20 18:47:11 debian kernel: [    0.198538] pci 0000:00:16.0: PME# supported from D0 D1 D2 D3hot D3cold
Nov 20 18:47:11 debian kernel: [    0.198585] pci 0000:00:16.0: System wakeup disabled by ACPI
Nov 20 18:47:11 debian kernel: [    0.198622] pci 0000:00:17.0: [10de:0377] type 01 class 0x060400
Nov 20 18:47:11 debian kernel: [    0.198648] pci 0000:00:17.0: PME# supported from D0 D1 D2 D3hot D3cold
Nov 20 18:47:11 debian kernel: [    0.198697] pci 0000:00:17.0: System wakeup disabled by ACPI
Nov 20 18:47:11 debian kernel: [    0.198730] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
Nov 20 18:47:11 debian kernel: [    0.198806] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
Nov 20 18:47:11 debian kernel: [    0.198882] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
Nov 20 18:47:11 debian kernel: [    0.198956] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
Nov 20 18:47:11 debian kernel: [    0.199068] pci 0000:01:00.0: [10de:1040] type 00 class 0x030000
Nov 20 18:47:11 debian kernel: [    0.199082] pci 0000:01:00.0: reg 0x10: [mem 0xfb000000-0xfbffffff]
Nov 20 18:47:11 debian kernel: [    0.199089] pci 0000:01:00.0: reg 0x14: [mem 0xd8000000-0xdfffffff 64bit pref]
Nov 20 18:47:11 debian kernel: [    0.199096] pci 0000:01:00.0: reg 0x1c: [mem 0xe6000000-0xe7ffffff 64bit pref]
Nov 20 18:47:11 debian kernel: [    0.199101] pci 0000:01:00.0: reg 0x24: [io  0xac00-0xac7f]
Nov 20 18:47:11 debian kernel: [    0.199106] pci 0000:01:00.0: reg 0x30: [mem 0xfcf00000-0xfcf7ffff pref]
Nov 20 18:47:11 debian kernel: [    0.199162] pci 0000:01:00.1: [10de:0e08] type 00 class 0x040300
Nov 20 18:47:11 debian kernel: [    0.199175] pci 0000:01:00.1: reg 0x10: [mem 0xfcffc000-0xfcffffff]
Nov 20 18:47:11 debian kernel: [    0.204016] pci 0000:00:04.0: PCI bridge to [bus 01]
Nov 20 18:47:11 debian kernel: [    0.204019] pci 0000:00:04.0:   bridge window [io  0xa000-0xafff]
Nov 20 18:47:11 debian kernel: [    0.204021] pci 0000:00:04.0:   bridge window [mem 0xfb000000-0xfcffffff]
Nov 20 18:47:11 debian kernel: [    0.204024] pci 0000:00:04.0:   bridge window [mem 0xd8000000-0xe7ffffff 64bit pref]
Nov 20 18:47:11 debian kernel: [    0.204060] pci 0000:02:08.0: [1102:0004] type 00 class 0x040100
Nov 20 18:47:11 debian kernel: [    0.204074] pci 0000:02:08.0: reg 0x10: [io  0x9c00-0x9c3f]
Nov 20 18:47:11 debian kernel: [    0.204114] pci 0000:02:08.0: supports D1 D2
Nov 20 18:47:11 debian kernel: [    0.204151] pci 0000:02:08.1: [1102:7003] type 00 class 0x098000
Nov 20 18:47:11 debian kernel: [    0.204164] pci 0000:02:08.1: reg 0x10: [io  0x9800-0x9807]
Nov 20 18:47:11 debian kernel: [    0.204204] pci 0000:02:08.1: supports D1 D2
Nov 20 18:47:11 debian kernel: [    0.204239] pci 0000:02:08.2: [1102:4001] type 00 class 0x0c0010
Nov 20 18:47:11 debian kernel: [    0.204254] pci 0000:02:08.2: reg 0x10: [mem 0xfdfff000-0xfdfff7ff]
Nov 20 18:47:11 debian kernel: [    0.204261] pci 0000:02:08.2: reg 0x14: [mem 0xfdff8000-0xfdffbfff]
Nov 20 18:47:11 debian kernel: [    0.204300] pci 0000:02:08.2: supports D1 D2
Nov 20 18:47:11 debian kernel: [    0.204301] pci 0000:02:08.2: PME# supported from D0 D1 D2 D3hot
Nov 20 18:47:11 debian kernel: [    0.204349] pci 0000:02:0b.0: [104c:8023] type 00 class 0x0c0010
Nov 20 18:47:11 debian kernel: [    0.204364] pci 0000:02:0b.0: reg 0x10: [mem 0xfdffe000-0xfdffe7ff]
Nov 20 18:47:11 debian kernel: [    0.204371] pci 0000:02:0b.0: reg 0x14: [mem 0xfdff4000-0xfdff7fff]
Nov 20 18:47:11 debian kernel: [    0.204409] pci 0000:02:0b.0: supports D1 D2
Nov 20 18:47:11 debian kernel: [    0.204411] pci 0000:02:0b.0: PME# supported from D0 D1 D2 D3hot
Nov 20 18:47:11 debian kernel: [    0.204463] pci 0000:00:0e.0: PCI bridge to [bus 02] (subtractive decode)
Nov 20 18:47:11 debian kernel: [    0.204466] pci 0000:00:0e.0:   bridge window [io  0x9000-0x9fff]
Nov 20 18:47:11 debian kernel: [    0.204468] pci 0000:00:0e.0:   bridge window [mem 0xfdf00000-0xfdffffff]
Nov 20 18:47:11 debian kernel: [    0.204471] pci 0000:00:0e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
Nov 20 18:47:11 debian kernel: [    0.204473] pci 0000:00:0e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
Nov 20 18:47:11 debian kernel: [    0.204475] pci 0000:00:0e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
Nov 20 18:47:11 debian kernel: [    0.204477] pci 0000:00:0e.0:   bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
Nov 20 18:47:11 debian kernel: [    0.204479] pci 0000:00:0e.0:   bridge window [mem 0xbff00000-0xfebfffff window] (subtractive decode)
Nov 20 18:47:11 debian kernel: [    0.204509] pci 0000:00:12.0: PCI bridge to [bus 03]
Nov 20 18:47:11 debian kernel: [    0.204556] pci 0000:04:00.0: [1095:3132] type 00 class 0x018000
Nov 20 18:47:11 debian kernel: [    0.204596] pci 0000:04:00.0: reg 0x10: [mem 0xfdeff000-0xfdeff07f 64bit]
Nov 20 18:47:11 debian kernel: [    0.204613] pci 0000:04:00.0: reg 0x18: [mem 0xfdef8000-0xfdefbfff 64bit]
Nov 20 18:47:11 debian kernel: [    0.204625] pci 0000:04:00.0: reg 0x20: [io  0x8c00-0x8c7f]
Nov 20 18:47:11 debian kernel: [    0.204646] pci 0000:04:00.0: reg 0x30: [mem 0xfde00000-0xfde7ffff pref]
Nov 20 18:47:11 debian kernel: [    0.204680] pci 0000:04:00.0: supports D1 D2
Nov 20 18:47:11 debian kernel: [    0.204718] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
Nov 20 18:47:11 debian kernel: [    0.204725] pci 0000:00:16.0: PCI bridge to [bus 04]
Nov 20 18:47:11 debian kernel: [    0.204728] pci 0000:00:16.0:   bridge window [io  0x8000-0x8fff]
Nov 20 18:47:11 debian kernel: [    0.204730] pci 0000:00:16.0:   bridge window [mem 0xfde00000-0xfdefffff]
Nov 20 18:47:11 debian kernel: [    0.204761] pci 0000:00:17.0: PCI bridge to [bus 05]
Nov 20 18:47:11 debian kernel: [    0.204778] pci_bus 0000:00: on NUMA node 0
Nov 20 18:47:11 debian kernel: [    0.205173] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 *10 11 14 15)
Nov 20 18:47:11 debian kernel: [    0.205219] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
Nov 20 18:47:11 debian kernel: [    0.205264] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 *10 11 14 15)
Nov 20 18:47:11 debian kernel: [    0.205309] ACPI: PCI Interrupt Link [LNK4] (IRQs *5 7 9 10 11 14 15)
Nov 20 18:47:11 debian kernel: [    0.205354] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 *11 14 15)
Nov 20 18:47:11 debian kernel: [    0.205398] ACPI: PCI Interrupt Link [LNK6] (IRQs *5 7 9 10 11 14 15)
Nov 20 18:47:11 debian kernel: [    0.205442] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 *7 9 10 11 14 15)
Nov 20 18:47:11 debian kernel: [    0.205486] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
Nov 20 18:47:11 debian kernel: [    0.205530] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
Nov 20 18:47:11 debian kernel: [    0.205575] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 *11 14 15)
Nov 20 18:47:11 debian kernel: [    0.205619] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 *11 14 15)
Nov 20 18:47:11 debian kernel: [    0.205663] ACPI: PCI Interrupt Link [LMC1] (IRQs 5 *7 9 10 11 14 15)
Nov 20 18:47:11 debian kernel: [    0.205707] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 11 14 15) *0, disabled.
Nov 20 18:47:11 debian kernel: [    0.205751] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
Nov 20 18:47:11 debian kernel: [    0.205795] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15)
Nov 20 18:47:11 debian kernel: [    0.205840] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 *7 9 10 11 14 15)
Nov 20 18:47:11 debian kernel: [    0.205884] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
Nov 20 18:47:11 debian kernel: [    0.205929] ACPI: PCI Interrupt Link [LSID] (IRQs *5 7 9 10 11 14 15)
Nov 20 18:47:11 debian kernel: [    0.205979] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 *10 11 14 15)
Nov 20 18:47:11 debian kernel: [    0.206028] ACPI: PCI Interrupt Link [LSA2] (IRQs 5 7 9 10 *11 14 15)
Nov 20 18:47:11 debian kernel: [    0.206109] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
Nov 20 18:47:11 debian kernel: [    0.206181] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
Nov 20 18:47:11 debian kernel: [    0.206252] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
Nov 20 18:47:11 debian kernel: [    0.206324] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
Nov 20 18:47:11 debian kernel: [    0.206395] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
Nov 20 18:47:11 debian kernel: [    0.206467] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
Nov 20 18:47:11 debian kernel: [    0.206539] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
Nov 20 18:47:11 debian kernel: [    0.206610] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
Nov 20 18:47:11 debian kernel: [    0.206682] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
Nov 20 18:47:11 debian kernel: [    0.206755] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
Nov 20 18:47:11 debian kernel: [    0.206828] ACPI: PCI Interrupt Link [AMC1] (IRQs 20 21 22 23) *0, disabled.
Nov 20 18:47:11 debian kernel: [    0.206901] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
Nov 20 18:47:11 debian kernel: [    0.206974] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0, disabled.
Nov 20 18:47:11 debian kernel: [    0.207046] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
Nov 20 18:47:11 debian kernel: [    0.207119] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
Nov 20 18:47:11 debian kernel: [    0.207193] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
Nov 20 18:47:11 debian kernel: [    0.207265] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
Nov 20 18:47:11 debian kernel: [    0.207338] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
Nov 20 18:47:11 debian kernel: [    0.207411] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
Nov 20 18:47:11 debian kernel: [    0.207485] ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0, disabled.
Nov 20 18:47:11 debian kernel: [    0.207562] ACPI: Enabled 1 GPEs in block 20 to 5F
Nov 20 18:47:11 debian kernel: [    0.207663] vgaarb: setting as boot device: PCI:0000:01:00.0
Nov 20 18:47:11 debian kernel: [    0.207663] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
Nov 20 18:47:11 debian kernel: [    0.207663] vgaarb: loaded
Nov 20 18:47:11 debian kernel: [    0.207663] vgaarb: bridge control possible 0000:01:00.0
Nov 20 18:47:11 debian kernel: [    0.207663] PCI: Using ACPI for IRQ routing
Nov 20 18:47:11 debian kernel: [    0.209103] PCI: pci_cache_line_size set to 64 bytes
Nov 20 18:47:11 debian kernel: [    0.209151] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
Nov 20 18:47:11 debian kernel: [    0.209153] e820: reserve RAM buffer [mem 0xbfee0000-0xbfffffff]
Nov 20 18:47:11 debian kernel: [    0.209305] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Nov 20 18:47:11 debian kernel: [    0.209312] hpet0: at MMIO 0xfefff000, IRQs 2, 8, 31
Nov 20 18:47:11 debian kernel: [    0.209315] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
Nov 20 18:47:11 debian kernel: [    0.211341] clocksource: Switched to clocksource hpet
Nov 20 18:47:11 debian kernel: [    0.215137] pnp: PnP ACPI init
Nov 20 18:47:11 debian kernel: [    0.215295] system 00:00: [io  0x1000-0x107f] has been reserved
Nov 20 18:47:11 debian kernel: [    0.215297] system 00:00: [io  0x1080-0x10ff] has been reserved
Nov 20 18:47:11 debian kernel: [    0.215300] system 00:00: [io  0x1400-0x147f] has been reserved
Nov 20 18:47:11 debian kernel: [    0.215302] system 00:00: [io  0x1480-0x14ff] has been reserved
Nov 20 18:47:11 debian kernel: [    0.215304] system 00:00: [io  0x1800-0x187f] has been reserved
Nov 20 18:47:11 debian kernel: [    0.215306] system 00:00: [io  0x1880-0x18ff] has been reserved
Nov 20 18:47:11 debian kernel: [    0.215310] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
Nov 20 18:47:11 debian kernel: [    0.215401] system 00:01: [io  0x04d0-0x04d1] has been reserved
Nov 20 18:47:11 debian kernel: [    0.215403] system 00:01: [io  0x0800-0x087f] has been reserved
Nov 20 18:47:11 debian kernel: [    0.215406] system 00:01: [io  0x0290-0x0297] has been reserved
Nov 20 18:47:11 debian kernel: [    0.215408] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
Nov 20 18:47:11 debian kernel: [    0.215471] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
Nov 20 18:47:11 debian kernel: [    0.215608] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
Nov 20 18:47:11 debian kernel: [    0.216177] system 00:04: [mem 0xf0000000-0xf3ffffff] has been reserved
Nov 20 18:47:11 debian kernel: [    0.216179] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
Nov 20 18:47:11 debian kernel: [    0.216325] system 00:05: [mem 0x000cde00-0x000cffff] has been reserved
Nov 20 18:47:11 debian kernel: [    0.216328] system 00:05: [mem 0x000f0000-0x000f7fff] could not be reserved
Nov 20 18:47:11 debian kernel: [    0.216330] system 00:05: [mem 0x000f8000-0x000fbfff] could not be reserved
Nov 20 18:47:11 debian kernel: [    0.216332] system 00:05: [mem 0x000fc000-0x000fffff] could not be reserved
Nov 20 18:47:11 debian kernel: [    0.216335] system 00:05: [mem 0xfefff000-0xfefff0ff] has been reserved
Nov 20 18:47:11 debian kernel: [    0.216337] system 00:05: [mem 0xbfee0000-0xbfefffff] could not be reserved
Nov 20 18:47:11 debian kernel: [    0.216339] system 00:05: [mem 0xffff0000-0xffffffff] has been reserved
Nov 20 18:47:11 debian kernel: [    0.216341] system 00:05: [mem 0x00000000-0x0009ffff] could not be reserved
Nov 20 18:47:11 debian kernel: [    0.216343] system 00:05: [mem 0x00100000-0xbfedffff] could not be reserved
Nov 20 18:47:11 debian kernel: [    0.216345] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
Nov 20 18:47:11 debian kernel: [    0.216348] system 00:05: [mem 0xfee00000-0xfeefffff] has been reserved
Nov 20 18:47:11 debian kernel: [    0.216351] system 00:05: [mem 0xfefff000-0xfeffffff] could not be reserved
Nov 20 18:47:11 debian kernel: [    0.216353] system 00:05: [mem 0xfff80000-0xfff80fff] has been reserved
Nov 20 18:47:11 debian kernel: [    0.216355] system 00:05: [mem 0xfff90000-0xfffbffff] has been reserved
Nov 20 18:47:11 debian kernel: [    0.216357] system 00:05: [mem 0xfffed000-0xfffeffff] has been reserved
Nov 20 18:47:11 debian kernel: [    0.216359] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
Nov 20 18:47:11 debian kernel: [    0.216367] pnp: PnP ACPI: found 6 devices
Nov 20 18:47:11 debian kernel: [    0.223422] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
Nov 20 18:47:11 debian kernel: [    0.223449] pci 0000:00:04.0: PCI bridge to [bus 01]
Nov 20 18:47:11 debian kernel: [    0.223452] pci 0000:00:04.0:   bridge window [io  0xa000-0xafff]
Nov 20 18:47:11 debian kernel: [    0.223455] pci 0000:00:04.0:   bridge window [mem 0xfb000000-0xfcffffff]
Nov 20 18:47:11 debian kernel: [    0.223457] pci 0000:00:04.0:   bridge window [mem 0xd8000000-0xe7ffffff 64bit pref]
Nov 20 18:47:11 debian kernel: [    0.223461] pci 0000:00:0e.0: PCI bridge to [bus 02]
Nov 20 18:47:11 debian kernel: [    0.223463] pci 0000:00:0e.0:   bridge window [io  0x9000-0x9fff]
Nov 20 18:47:11 debian kernel: [    0.223465] pci 0000:00:0e.0:   bridge window [mem 0xfdf00000-0xfdffffff]
Nov 20 18:47:11 debian kernel: [    0.223469] pci 0000:00:12.0: PCI bridge to [bus 03]
Nov 20 18:47:11 debian kernel: [    0.223474] pci 0000:00:16.0: PCI bridge to [bus 04]
Nov 20 18:47:11 debian kernel: [    0.223476] pci 0000:00:16.0:   bridge window [io  0x8000-0x8fff]
Nov 20 18:47:11 debian kernel: [    0.223479] pci 0000:00:16.0:   bridge window [mem 0xfde00000-0xfdefffff]
Nov 20 18:47:11 debian kernel: [    0.223483] pci 0000:00:17.0: PCI bridge to [bus 05]
Nov 20 18:47:11 debian kernel: [    0.223488] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
Nov 20 18:47:11 debian kernel: [    0.223490] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
Nov 20 18:47:11 debian kernel: [    0.223492] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
Nov 20 18:47:11 debian kernel: [    0.223494] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
Nov 20 18:47:11 debian kernel: [    0.223496] pci_bus 0000:00: resource 8 [mem 0xbff00000-0xfebfffff window]
Nov 20 18:47:11 debian kernel: [    0.223498] pci_bus 0000:01: resource 0 [io  0xa000-0xafff]
Nov 20 18:47:11 debian kernel: [    0.223500] pci_bus 0000:01: resource 1 [mem 0xfb000000-0xfcffffff]
Nov 20 18:47:11 debian kernel: [    0.223502] pci_bus 0000:01: resource 2 [mem 0xd8000000-0xe7ffffff 64bit pref]
Nov 20 18:47:11 debian kernel: [    0.223504] pci_bus 0000:02: resource 0 [io  0x9000-0x9fff]
Nov 20 18:47:11 debian kernel: [    0.223506] pci_bus 0000:02: resource 1 [mem 0xfdf00000-0xfdffffff]
Nov 20 18:47:11 debian kernel: [    0.223507] pci_bus 0000:02: resource 4 [io  0x0000-0x0cf7 window]
Nov 20 18:47:11 debian kernel: [    0.223509] pci_bus 0000:02: resource 5 [io  0x0d00-0xffff window]
Nov 20 18:47:11 debian kernel: [    0.223511] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff window]
Nov 20 18:47:11 debian kernel: [    0.223513] pci_bus 0000:02: resource 7 [mem 0x000c0000-0x000dffff window]
Nov 20 18:47:11 debian kernel: [    0.223515] pci_bus 0000:02: resource 8 [mem 0xbff00000-0xfebfffff window]
Nov 20 18:47:11 debian kernel: [    0.223517] pci_bus 0000:04: resource 0 [io  0x8000-0x8fff]
Nov 20 18:47:11 debian kernel: [    0.223519] pci_bus 0000:04: resource 1 [mem 0xfde00000-0xfdefffff]
Nov 20 18:47:11 debian kernel: [    0.223580] NET: Registered protocol family 2
Nov 20 18:47:11 debian kernel: [    0.223755] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
Nov 20 18:47:11 debian kernel: [    0.223884] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
Nov 20 18:47:11 debian kernel: [    0.224070] TCP: Hash tables configured (established 32768 bind 32768)
Nov 20 18:47:11 debian kernel: [    0.224125] UDP hash table entries: 2048 (order: 4, 65536 bytes)
Nov 20 18:47:11 debian kernel: [    0.224158] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
Nov 20 18:47:11 debian kernel: [    0.224262] NET: Registered protocol family 1
Nov 20 18:47:11 debian kernel: [    0.224309] pci 0000:00:00.0: Found enabled HT MSI Mapping
Nov 20 18:47:11 debian kernel: [    0.224555] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
Nov 20 18:47:11 debian kernel: [    0.296314] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
Nov 20 18:47:11 debian kernel: [    0.296442] pci 0000:00:0d.0: Enabling HT MSI Mapping
Nov 20 18:47:11 debian kernel: [    0.296478] pci 0000:00:0d.1: Enabling HT MSI Mapping
Nov 20 18:47:11 debian kernel: [    0.296514] pci 0000:00:0d.2: Enabling HT MSI Mapping
Nov 20 18:47:11 debian kernel: [    0.296550] pci 0000:00:0e.0: Enabling HT MSI Mapping
Nov 20 18:47:11 debian kernel: [    0.296594] pci 0000:00:10.0: Enabling HT MSI Mapping
Nov 20 18:47:11 debian kernel: [    0.296642] pci 0000:00:11.0: Enabling HT MSI Mapping
Nov 20 18:47:11 debian kernel: [    0.296691] pci 0000:00:12.0: Enabling HT MSI Mapping
Nov 20 18:47:11 debian kernel: [    0.296743] pci 0000:00:16.0: Enabling HT MSI Mapping
Nov 20 18:47:11 debian kernel: [    0.296799] pci 0000:00:17.0: Enabling HT MSI Mapping
Nov 20 18:47:11 debian kernel: [    0.296814] pci 0000:01:00.0: Video device with shadowed ROM
Nov 20 18:47:11 debian kernel: [    0.296830] PCI: CLS 32 bytes, default 64
Nov 20 18:47:11 debian kernel: [    0.296897] Unpacking initramfs...
Nov 20 18:47:11 debian kernel: [    0.582518] Freeing initrd memory: 15704K (ffff880036144000 - ffff88003709a000)
Nov 20 18:47:11 debian kernel: [    0.582796] PCI-DMA: Disabling AGP.
Nov 20 18:47:11 debian kernel: [    0.582867] PCI-DMA: aperture base @ b4000000 size 65536 KB
Nov 20 18:47:11 debian kernel: [    0.582868] PCI-DMA: using GART IOMMU.
Nov 20 18:47:11 debian kernel: [    0.582871] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
Nov 20 18:47:11 debian kernel: [    0.586349] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b712491adf, max_idle_ns: 440795304721 ns
Nov 20 18:47:11 debian kernel: [    0.586370] microcode: AMD CPU family 0xf not supported
Nov 20 18:47:11 debian kernel: [    0.586771] futex hash table entries: 1024 (order: 4, 65536 bytes)
Nov 20 18:47:11 debian kernel: [    0.586812] audit: initializing netlink subsys (disabled)
Nov 20 18:47:11 debian kernel: [    0.586835] audit: type=2000 audit(1448041614.584:1): initialized
Nov 20 18:47:11 debian kernel: [    0.587126] HugeTLB registered 2 MB page size, pre-allocated 0 pages
Nov 20 18:47:11 debian kernel: [    0.587147] zpool: loaded
Nov 20 18:47:11 debian kernel: [    0.587149] zbud: loaded
Nov 20 18:47:11 debian kernel: [    0.587303] VFS: Disk quotas dquot_6.6.0
Nov 20 18:47:11 debian kernel: [    0.587321] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Nov 20 18:47:11 debian kernel: [    0.587743] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
Nov 20 18:47:11 debian kernel: [    0.587784] io scheduler noop registered
Nov 20 18:47:11 debian kernel: [    0.587786] io scheduler deadline registered
Nov 20 18:47:11 debian kernel: [    0.587798] io scheduler cfq registered (default)
Nov 20 18:47:11 debian kernel: [    0.588125] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Nov 20 18:47:11 debian kernel: [    0.588132] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
Nov 20 18:47:11 debian kernel: [    0.588190] GHES: HEST is not enabled!
Nov 20 18:47:11 debian kernel: [    0.588254] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Nov 20 18:47:11 debian kernel: [    0.588698] Linux agpgart interface v0.103
Nov 20 18:47:11 debian kernel: [    0.588744] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
Nov 20 18:47:11 debian kernel: [    0.588745] AMD IOMMUv2 functionality not available on this system
Nov 20 18:47:11 debian kernel: [    0.588936] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
Nov 20 18:47:11 debian kernel: [    0.588937] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
Nov 20 18:47:11 debian kernel: [    0.589082] serio: i8042 KBD port at 0x60,0x64 irq 1
Nov 20 18:47:11 debian kernel: [    0.589195] mousedev: PS/2 mouse device common for all mice
Nov 20 18:47:11 debian kernel: [    0.589248] rtc_cmos 00:02: RTC can wake from S4
Nov 20 18:47:11 debian kernel: [    0.589387] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
Nov 20 18:47:11 debian kernel: [    0.589423] rtc_cmos 00:02: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
Nov 20 18:47:11 debian kernel: [    0.589435] ledtrig-cpu: registered to indicate activity on CPUs
Nov 20 18:47:11 debian kernel: [    0.590006] NET: Registered protocol family 10
Nov 20 18:47:11 debian kernel: [    0.590220] mip6: Mobile IPv6
Nov 20 18:47:11 debian kernel: [    0.590224] NET: Registered protocol family 17
Nov 20 18:47:11 debian kernel: [    0.590229] mpls_gso: MPLS GSO support
Nov 20 18:47:11 debian kernel: [    0.590526] registered taskstats version 1
Nov 20 18:47:11 debian kernel: [    0.590543] zswap: loading zswap
Nov 20 18:47:11 debian kernel: [    0.590546] zswap: using zbud pool
Nov 20 18:47:11 debian kernel: [    0.590549] zswap: using lzo compressor
Nov 20 18:47:11 debian kernel: [    0.590959] rtc_cmos 00:02: setting system clock to 2015-11-20 17:46:54 UTC (1448041614)
Nov 20 18:47:11 debian kernel: [    0.591007] PM: Hibernation image not present or could not be loaded.
Nov 20 18:47:11 debian kernel: [    0.591585] Freeing unused kernel memory: 1292K (ffffffff81b13000 - ffffffff81c56000)
Nov 20 18:47:11 debian kernel: [    0.591589] Write protecting the kernel read-only data: 10240k
Nov 20 18:47:11 debian kernel: [    0.591969] Freeing unused kernel memory: 640K (ffff880001560000 - ffff880001600000)
Nov 20 18:47:11 debian kernel: [    0.592577] Freeing unused kernel memory: 1356K (ffff8800018ad000 - ffff880001a00000)
Nov 20 18:47:11 debian kernel: [    0.603365] random: systemd-udevd urandom read with 2 bits of entropy available
Nov 20 18:47:11 debian kernel: [    0.615731] ACPI: bus type USB registered
Nov 20 18:47:11 debian kernel: [    0.615760] usbcore: registered new interface driver usbfs
Nov 20 18:47:11 debian kernel: [    0.615771] usbcore: registered new interface driver hub
Nov 20 18:47:11 debian kernel: [    0.615803] usbcore: registered new device driver usb
Nov 20 18:47:11 debian kernel: [    0.616308] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Nov 20 18:47:11 debian kernel: [    0.616440] ehci-pci: EHCI PCI platform driver
Nov 20 18:47:11 debian kernel: [    0.616612] ehci-pci 0000:00:0a.1: EHCI Host Controller
Nov 20 18:47:11 debian kernel: [    0.616620] ehci-pci 0000:00:0a.1: new USB bus registered, assigned bus number 1
Nov 20 18:47:11 debian kernel: [    0.616630] ehci-pci 0000:00:0a.1: debug port 1
Nov 20 18:47:11 debian kernel: [    0.616656] ehci-pci 0000:00:0a.1: cache line size of 32 is not supported
Nov 20 18:47:11 debian kernel: [    0.616678] ehci-pci 0000:00:0a.1: irq 22, io mem 0xfe02e000
Nov 20 18:47:11 debian kernel: [    0.618039] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Nov 20 18:47:11 debian kernel: [    0.618708] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
Nov 20 18:47:11 debian kernel: [    0.621424] SCSI subsystem initialized
Nov 20 18:47:11 debian kernel: [    0.623916] libata version 3.00 loaded.
Nov 20 18:47:11 debian kernel: [    0.628048] ehci-pci 0000:00:0a.1: USB 2.0 started, EHCI 1.00
Nov 20 18:47:11 debian kernel: [    0.628117] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Nov 20 18:47:11 debian kernel: [    0.628119] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Nov 20 18:47:11 debian kernel: [    0.628121] usb usb1: Product: EHCI Host Controller
Nov 20 18:47:11 debian kernel: [    0.628122] usb usb1: Manufacturer: Linux 4.2.0-0.bpo.1-amd64 ehci_hcd
Nov 20 18:47:11 debian kernel: [    0.628124] usb usb1: SerialNumber: 0000:00:0a.1
Nov 20 18:47:11 debian kernel: [    0.628317] hub 1-0:1.0: USB hub found
Nov 20 18:47:11 debian kernel: [    0.628324] hub 1-0:1.0: 10 ports detected
Nov 20 18:47:11 debian kernel: [    0.628855] ohci-pci: OHCI PCI platform driver
Nov 20 18:47:11 debian kernel: [    0.629002] ohci-pci 0000:00:0a.0: OHCI PCI host controller
Nov 20 18:47:11 debian kernel: [    0.629008] ohci-pci 0000:00:0a.0: new USB bus registered, assigned bus number 2
Nov 20 18:47:11 debian kernel: [    0.629048] ohci-pci 0000:00:0a.0: irq 23, io mem 0xfe02f000
Nov 20 18:47:11 debian kernel: [    0.629676] ACPI: Invalid passive threshold
Nov 20 18:47:11 debian kernel: [    0.629871] thermal LNXTHERM:00: registered as thermal_zone0
Nov 20 18:47:11 debian kernel: [    0.629873] ACPI: Thermal Zone [THRM] (40 C)
Nov 20 18:47:11 debian kernel: [    0.634673] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
Nov 20 18:47:11 debian kernel: [    0.635807] sata_sil24 0000:04:00.0: version 1.1
Nov 20 18:47:11 debian kernel: [    0.636043] ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16
Nov 20 18:47:11 debian kernel: [    0.636568] scsi host0: sata_sil24
Nov 20 18:47:11 debian kernel: [    0.644188] scsi host1: sata_sil24
Nov 20 18:47:11 debian kernel: [    0.644247] ata1: SATA max UDMA/100 host m128@0xfdeff000 port 0xfdef8000 irq 16
Nov 20 18:47:11 debian kernel: [    0.644250] ata2: SATA max UDMA/100 host m128@0xfdeff000 port 0xfdefa000 irq 16
Nov 20 18:47:11 debian kernel: [    0.686081] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
Nov 20 18:47:11 debian kernel: [    0.686085] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Nov 20 18:47:11 debian kernel: [    0.686087] usb usb2: Product: OHCI PCI host controller
Nov 20 18:47:11 debian kernel: [    0.686088] usb usb2: Manufacturer: Linux 4.2.0-0.bpo.1-amd64 ohci_hcd
Nov 20 18:47:11 debian kernel: [    0.686090] usb usb2: SerialNumber: 0000:00:0a.0
Nov 20 18:47:11 debian kernel: [    0.686230] hub 2-0:1.0: USB hub found
Nov 20 18:47:11 debian kernel: [    0.686240] hub 2-0:1.0: 10 ports detected
Nov 20 18:47:11 debian kernel: [    0.686484] pata_amd 0000:00:0c.0: version 0.4.1
Nov 20 18:47:11 debian kernel: [    0.687233] scsi host2: pata_amd
Nov 20 18:47:11 debian kernel: [    0.687333] scsi host3: pata_amd
Nov 20 18:47:11 debian kernel: [    0.687379] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf400 irq 14
Nov 20 18:47:11 debian kernel: [    0.687381] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf408 irq 15
Nov 20 18:47:11 debian kernel: [    0.687402] sata_nv 0000:00:0d.0: version 3.5
Nov 20 18:47:11 debian kernel: [    0.687611] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
Nov 20 18:47:11 debian kernel: [    0.687627] sata_nv 0000:00:0d.0: Using SWNCQ mode
Nov 20 18:47:11 debian kernel: [    0.688065] firewire_ohci 0000:02:08.2: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
Nov 20 18:47:11 debian kernel: [    0.688410] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
Nov 20 18:47:11 debian kernel: [    0.688722] scsi host4: sata_nv
Nov 20 18:47:11 debian kernel: [    0.688812] scsi host5: sata_nv
Nov 20 18:47:11 debian kernel: [    0.688861] ata5: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xe000 irq 21
Nov 20 18:47:11 debian kernel: [    0.688864] ata6: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xe008 irq 21
Nov 20 18:47:11 debian kernel: [    0.689068] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20
Nov 20 18:47:11 debian kernel: [    0.689083] sata_nv 0000:00:0d.1: Using SWNCQ mode
Nov 20 18:47:11 debian kernel: [    0.689873] scsi host6: sata_nv
Nov 20 18:47:11 debian kernel: [    0.690044] scsi host7: sata_nv
Nov 20 18:47:11 debian kernel: [    0.690102] ata7: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xcc00 irq 20
Nov 20 18:47:11 debian kernel: [    0.690104] ata8: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xcc08 irq 20
Nov 20 18:47:11 debian kernel: [    0.690305] ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 23
Nov 20 18:47:11 debian kernel: [    0.690311] sata_nv 0000:00:0d.2: Using SWNCQ mode
Nov 20 18:47:11 debian kernel: [    0.691094] scsi host8: sata_nv
Nov 20 18:47:11 debian kernel: [    0.691189] scsi host9: sata_nv
Nov 20 18:47:11 debian kernel: [    0.691239] ata9: SATA max UDMA/133 cmd 0xc800 ctl 0xc400 bmdma 0xb800 irq 23
Nov 20 18:47:11 debian kernel: [    0.691242] ata10: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb808 irq 23
Nov 20 18:47:11 debian kernel: [    0.691284] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
Nov 20 18:47:11 debian kernel: [    0.691477] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
Nov 20 18:47:11 debian kernel: [    0.744036] firewire_ohci 0000:02:0b.0: added OHCI v1.10 device as card 1, 4 IR + 8 IT contexts, quirks 0x2
Nov 20 18:47:11 debian kernel: [    0.848276] ata3.00: ATAPI: HL-DT-STDVD-ROM GDR8164B, 0L06, max UDMA/33
Nov 20 18:47:11 debian kernel: [    0.848283] ata3: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:600:0x13)
Nov 20 18:47:11 debian kernel: [    0.864209] ata3.00: configured for UDMA/33
Nov 20 18:47:11 debian kernel: [    1.000031] ata7: SATA link down (SStatus 0 SControl 300)
Nov 20 18:47:11 debian kernel: [    1.000047] ata9: SATA link down (SStatus 0 SControl 300)
Nov 20 18:47:11 debian kernel: [    1.156025] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Nov 20 18:47:11 debian kernel: [    1.184017] usb 2-4: new low-speed USB device number 2 using ohci-pci
Nov 20 18:47:11 debian kernel: [    1.188098] firewire_core 0000:02:08.2: created device fw0: GUID 00023c01510e311f, S400
Nov 20 18:47:11 debian kernel: [    1.211750] ata5.00: ATA-7: MAXTOR STM380815AS, 3.AAD, max UDMA/133
Nov 20 18:47:11 debian kernel: [    1.211752] ata5.00: 156301488 sectors, multi 1: LBA48 NCQ (depth 31/32)
Nov 20 18:47:11 debian kernel: [    1.212531] forcedeth 0000:00:10.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:1b:fc:9c:7f:91
Nov 20 18:47:11 debian kernel: [    1.212535] forcedeth 0000:00:10.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
Nov 20 18:47:11 debian kernel: [    1.212745] ACPI: PCI Interrupt Link [AMC1] enabled at IRQ 21
Nov 20 18:47:11 debian kernel: [    1.244079] firewire_core 0000:02:0b.0: created device fw1: GUID 0011d8000154e1ff, S400
Nov 20 18:47:11 debian kernel: [    1.278385] ata5.00: configured for UDMA/133
Nov 20 18:47:11 debian kernel: [    1.398039] usb 2-4: New USB device found, idVendor=046d, idProduct=c062
Nov 20 18:47:11 debian kernel: [    1.398041] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Nov 20 18:47:11 debian kernel: [    1.398043] usb 2-4: Product: USB Laser Mouse
Nov 20 18:47:11 debian kernel: [    1.398045] usb 2-4: Manufacturer: Logitech
Nov 20 18:47:11 debian kernel: [    1.402071] hidraw: raw HID events driver (C) Jiri Kosina
Nov 20 18:47:11 debian kernel: [    1.410266] usbcore: registered new interface driver usbhid
Nov 20 18:47:11 debian kernel: [    1.410268] usbhid: USB HID core driver
Nov 20 18:47:11 debian kernel: [    1.410947] input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:0a.0/usb2/2-4/2-4:1.0/0003:046D:C062.0001/input/input1
Nov 20 18:47:11 debian kernel: [    1.411021] hid-generic 0003:046D:C062.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:00:0a.0-4/input0
Nov 20 18:47:11 debian kernel: [    1.736511] forcedeth 0000:00:11.0: ifname eth1, PHY OUI 0x5043 @ 1, addr 00:1b:fc:9c:84:7d
Nov 20 18:47:11 debian kernel: [    1.736514] forcedeth 0000:00:11.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
Nov 20 18:47:11 debian kernel: [    2.724031] ata1: SATA link down (SStatus 0 SControl 0)
Nov 20 18:47:11 debian kernel: [    3.644036] floppy0: no floppy controllers found
Nov 20 18:47:11 debian kernel: [    4.804028] ata2: SATA link down (SStatus 0 SControl 0)
Nov 20 18:47:11 debian kernel: [    4.807344] scsi 2:0:0:0: CD-ROM            HL-DT-ST DVD-ROM GDR8164B 0L06 PQ: 0 ANSI: 5
Nov 20 18:47:11 debian kernel: [    4.813502] ata4: port disabled--ignoring
Nov 20 18:47:11 debian kernel: [    4.813593] scsi 4:0:0:0: Direct-Access     ATA      MAXTOR STM380815 D    PQ: 0 ANSI: 5
Nov 20 18:47:11 debian kernel: [    5.124017] ata6: SATA link down (SStatus 0 SControl 300)
Nov 20 18:47:11 debian kernel: [    5.436017] ata8: SATA link down (SStatus 0 SControl 300)
Nov 20 18:47:11 debian kernel: [    5.748019] ata10: SATA link down (SStatus 0 SControl 300)
Nov 20 18:47:11 debian kernel: [    5.759225] sr 2:0:0:0: [sr0] scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
Nov 20 18:47:11 debian kernel: [    5.759230] cdrom: Uniform CD-ROM driver Revision: 3.20
Nov 20 18:47:11 debian kernel: [    5.759348] sr 2:0:0:0: Attached scsi CD-ROM sr0
Nov 20 18:47:11 debian kernel: [    5.759626] sd 4:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
Nov 20 18:47:11 debian kernel: [    5.759676] sd 4:0:0:0: [sda] Write Protect is off
Nov 20 18:47:11 debian kernel: [    5.759678] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
Nov 20 18:47:11 debian kernel: [    5.759700] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Nov 20 18:47:11 debian kernel: [    5.759925] sr 2:0:0:0: Attached scsi generic sg0 type 5
Nov 20 18:47:11 debian kernel: [    5.759959] sd 4:0:0:0: Attached scsi generic sg1 type 0
Nov 20 18:47:11 debian kernel: [    5.806201]  sda: sda1 sda2 < sda5 >
Nov 20 18:47:11 debian kernel: [    5.806562] sd 4:0:0:0: [sda] Attached SCSI disk
Nov 20 18:47:11 debian kernel: [    6.190967] PM: Starting manual resume from disk
Nov 20 18:47:11 debian kernel: [    6.190973] PM: Hibernation image partition 8:5 present
Nov 20 18:47:11 debian kernel: [    6.190974] PM: Looking for hibernation image.
Nov 20 18:47:11 debian kernel: [    6.191206] PM: Image not found (code -22)
Nov 20 18:47:11 debian kernel: [    6.191210] PM: Hibernation image not present or could not be loaded.
Nov 20 18:47:11 debian kernel: [    6.418168] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
Nov 20 18:47:11 debian kernel: [    7.127718] random: nonblocking pool is initialized
Nov 20 18:47:11 debian kernel: [    8.717137] fuse init (API version 7.23)
Nov 20 18:47:11 debian kernel: [   10.551170] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
Nov 20 18:47:11 debian kernel: [   10.551177] ACPI: Power Button [PWRB]
Nov 20 18:47:11 debian kernel: [   10.551249] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
Nov 20 18:47:11 debian kernel: [   10.551251] ACPI: Power Button [PWRF]
Nov 20 18:47:11 debian kernel: [   10.596354] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Nov 20 18:47:11 debian kernel: [   10.624398] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
Nov 20 18:47:11 debian kernel: [   10.864250] i2c i2c-0: nForce2 SMBus adapter at 0x1c00
Nov 20 18:47:11 debian kernel: [   10.864256] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C7F conflicts with OpRegion 0x0000000000001C40-0x0000000000001C45 (\_SB_.PCI0.SM01) (20150619/utaddress-254)
Nov 20 18:47:11 debian kernel: [   10.864261] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C7F conflicts with OpRegion 0x0000000000001C40-0x0000000000001C45 (\_SB_.PCI0.SM00) (20150619/utaddress-254)
Nov 20 18:47:11 debian kernel: [   10.864265] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Nov 20 18:47:11 debian kernel: [   11.103729] nv_tco: NV TCO WatchDog Timer Driver v0.01
Nov 20 18:47:11 debian kernel: [   11.103816] nv_tco: Watchdog reboot not detected
Nov 20 18:47:11 debian kernel: [   11.103864] nv_tco: initialized (0x1440). heartbeat=30 sec (nowayout=0)
Nov 20 18:47:11 debian kernel: [   11.136972] [drm] Initialized drm 1.1.0 20060810
Nov 20 18:47:11 debian kernel: [   11.345416] gameport gameport0: EMU10K1 is pci0000:02:08.1/gameport0, io 0x9800, speed 1203kHz
Nov 20 18:47:11 debian kernel: [   11.360570] ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16
Nov 20 18:47:11 debian kernel: [   11.360580] snd_hda_intel 0000:01:00.1: Disabling MSI
Nov 20 18:47:11 debian kernel: [   11.360586] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
Nov 20 18:47:11 debian kernel: [   11.385279] wmi: Mapper loaded
Nov 20 18:47:11 debian kernel: [   11.500190] input: PC Speaker as /devices/platform/pcspkr/input/input4
Nov 20 18:47:11 debian kernel: [   11.500910] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
Nov 20 18:47:11 debian kernel: [   11.504146] snd_emu10k1 0000:02:08.0: Installing spdif_bug patch: SB Audigy 2 ZS [SB0350]
Nov 20 18:47:11 debian kernel: [   11.610028] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
Nov 20 18:47:11 debian kernel: [   11.639059] ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16
Nov 20 18:47:11 debian kernel: [   11.639273] nouveau  [  DEVICE][0000:01:00.0] BOOT0  : 0x0d9000a1
Nov 20 18:47:11 debian kernel: [   11.639276] nouveau  [  DEVICE][0000:01:00.0] Chipset: GF119 (NVD9)
Nov 20 18:47:11 debian kernel: [   11.639277] EDAC MC: Ver: 3.0.0
Nov 20 18:47:11 debian kernel: [   11.639280] nouveau  [  DEVICE][0000:01:00.0] Family : NVC0
Nov 20 18:47:11 debian kernel: [   11.662086] MCE: In-kernel MCE decoding enabled.
Nov 20 18:47:11 debian kernel: [   11.714082] AMD64 EDAC driver v3.4.0
Nov 20 18:47:11 debian kernel: [   11.714120] EDAC amd64: DRAM ECC disabled.
Nov 20 18:47:11 debian kernel: [   11.714131] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Nov 20 18:47:11 debian kernel: [   11.714131]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
Nov 20 18:47:11 debian kernel: [   11.714131]  (Note that use of the override may cause unknown side effects.)
Nov 20 18:47:11 debian kernel: [   11.776669] nouveau  [   VBIOS][0000:01:00.0] using image from PRAMIN
Nov 20 18:47:11 debian kernel: [   11.776805] nouveau  [   VBIOS][0000:01:00.0] BIT signature found
Nov 20 18:47:11 debian kernel: [   11.776808] nouveau  [   VBIOS][0000:01:00.0] version 75.19.1b.00.00
Nov 20 18:47:11 debian kernel: [   11.777181] nouveau  [     PMC][0000:01:00.0] MSI interrupts enabled
Nov 20 18:47:11 debian kernel: [   11.777223] nouveau W[     PFB][0000:01:00.0][0x00000000] reclocking of this ram type unsupported
Nov 20 18:47:11 debian kernel: [   11.777225] nouveau  [     PFB][0000:01:00.0] RAM type: DDR3
Nov 20 18:47:11 debian kernel: [   11.777227] nouveau  [     PFB][0000:01:00.0] RAM size: 1024 MiB
Nov 20 18:47:11 debian kernel: [   11.777228] nouveau  [     PFB][0000:01:00.0]    ZCOMP: 0 tags
Nov 20 18:47:11 debian kernel: [   11.778727] nouveau  [    VOLT][0000:01:00.0] GPU voltage: 900000uv
Nov 20 18:47:11 debian kernel: [   11.827841] nouveau  [  PTHERM][0000:01:00.0] FAN control: PWM
Nov 20 18:47:11 debian kernel: [   11.827872] nouveau  [  PTHERM][0000:01:00.0] fan management: automatic
Nov 20 18:47:11 debian kernel: [   11.827931] nouveau  [  PTHERM][0000:01:00.0] internal sensor: yes
Nov 20 18:47:11 debian kernel: [   11.828020] nouveau  [     CLK][0000:01:00.0] 07: core 270 MHz memory 405 MHz
Nov 20 18:47:11 debian kernel: [   11.828024] nouveau  [     CLK][0000:01:00.0] 0f: core 810 MHz memory 535 MHz
Nov 20 18:47:11 debian kernel: [   11.828208] nouveau  [     CLK][0000:01:00.0] --: core 270 MHz memory 405 MHz
Nov 20 18:47:11 debian kernel: [   11.830583] [TTM] Zone  kernel: Available graphics memory: 2025254 kiB
Nov 20 18:47:11 debian kernel: [   11.830587] [TTM] Initializing pool allocator
Nov 20 18:47:11 debian kernel: [   11.830592] [TTM] Initializing DMA pool allocator
Nov 20 18:47:11 debian kernel: [   11.830605] nouveau  [     DRM] VRAM: 1024 MiB
Nov 20 18:47:11 debian kernel: [   11.830607] nouveau  [     DRM] GART: 1048576 MiB
Nov 20 18:47:11 debian kernel: [   11.830611] nouveau  [     DRM] TMDS table version 2.0
Nov 20 18:47:11 debian kernel: [   11.830613] nouveau  [     DRM] DCB version 4.0
Nov 20 18:47:11 debian kernel: [   11.830615] nouveau  [     DRM] DCB outp 00: 02000300 00000000
Nov 20 18:47:11 debian kernel: [   11.830617] nouveau  [     DRM] DCB outp 01: 01000302 00020030
Nov 20 18:47:11 debian kernel: [   11.830619] nouveau  [     DRM] DCB outp 02: 02011362 00020010
Nov 20 18:47:11 debian kernel: [   11.830620] nouveau  [     DRM] DCB outp 03: 04022310 00000000
Nov 20 18:47:11 debian kernel: [   11.830622] nouveau  [     DRM] DCB conn 00: 00001030
Nov 20 18:47:11 debian kernel: [   11.830624] nouveau  [     DRM] DCB conn 01: 00002161
Nov 20 18:47:11 debian kernel: [   11.830626] nouveau  [     DRM] DCB conn 02: 00000200
Nov 20 18:47:11 debian kernel: [   11.831379] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
Nov 20 18:47:11 debian kernel: [   11.831380] [drm] Driver supports precise vblank timestamp query.
Nov 20 18:47:11 debian kernel: [   11.835360] nouveau  [     DRM] MM: using COPY0 for buffer copies
Nov 20 18:47:11 debian kernel: [   11.939122] kvm: Nested Virtualization enabled
Nov 20 18:47:11 debian kernel: [   11.961557] nouveau  [     DRM] allocated 1680x1050 fb: 0x60000, bo ffff8800b99be800
Nov 20 18:47:11 debian kernel: [   11.961635] fbcon: nouveaufb (fb0) is primary device
Nov 20 18:47:11 debian kernel: [   11.964325] powernow_k8: fid 0x16 (3000 MHz), vid 0x8
Nov 20 18:47:11 debian kernel: [   11.964326] powernow_k8: fid 0x14 (2800 MHz), vid 0xa
Nov 20 18:47:11 debian kernel: [   11.964327] powernow_k8: fid 0x12 (2600 MHz), vid 0xc
Nov 20 18:47:11 debian kernel: [   11.964327] powernow_k8: fid 0x10 (2400 MHz), vid 0xe
Nov 20 18:47:11 debian kernel: [   11.964328] powernow_k8: fid 0xe (2200 MHz), vid 0x10
Nov 20 18:47:11 debian kernel: [   11.964328] powernow_k8: fid 0xc (2000 MHz), vid 0x10
Nov 20 18:47:11 debian kernel: [   11.964329] powernow_k8: fid 0xa (1800 MHz), vid 0x10
Nov 20 18:47:11 debian kernel: [   11.964329] powernow_k8: fid 0x2 (1000 MHz), vid 0x12
Nov 20 18:47:11 debian kernel: [   11.964388] powernow_k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ (2 cpu cores) (version 2.20.00)
Nov 20 18:47:11 debian kernel: [   12.037045] Console: switching to colour frame buffer device 210x65
Nov 20 18:47:11 debian kernel: [   12.040192] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
Nov 20 18:47:11 debian kernel: [   12.040194] nouveau 0000:01:00.0: registered panic notifier
Nov 20 18:47:11 debian kernel: [   12.060027] [drm] Initialized nouveau 1.2.2 20120801 for 0000:01:00.0 on minor 0
Nov 20 18:47:11 debian kernel: [   12.221240] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:04.0/0000:01:00.1/sound/card0/input5
Nov 20 18:47:11 debian kernel: [   12.221436] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:04.0/0000:01:00.1/sound/card0/input6
Nov 20 18:47:11 debian kernel: [   12.500285] Adding 3212284k swap on /dev/sda5.  Priority:-1 extents:1 across:3212284k FS
Nov 20 18:47:11 debian kernel: [   13.752047] floppy0: no floppy controllers found
Nov 20 18:47:11 debian kernel: [   13.752064] work still pending
Nov 20 18:47:11 debian kernel: [   13.995907] forcedeth 0000:00:10.0 eth0: MSI enabled
Nov 20 18:47:11 debian kernel: [   15.249393] RPC: Registered named UNIX socket transport module.
Nov 20 18:47:11 debian kernel: [   15.249402] RPC: Registered udp transport module.
Nov 20 18:47:11 debian kernel: [   15.249406] RPC: Registered tcp transport module.
Nov 20 18:47:11 debian kernel: [   15.249409] RPC: Registered tcp NFSv4.1 backchannel transport module.
Nov 20 18:47:11 debian kernel: [   15.291150] FS-Cache: Loaded
Nov 20 18:47:11 debian kernel: [   15.332341] FS-Cache: Netfs 'nfs' registered for caching
Nov 20 18:47:11 debian kernel: [   15.379929] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
 



Pour moi, ça me parait assez clean tongue

Dernière modification par golgot200 (20-11-2015 19:53:14)


L'ultime question ... l'intelligence a besoin de la bêtise pour s'affirmer, la beauté a besoin de la laideur pour resplendir, le courage nait dans la peur, les forts impressionnent au millieu des faibles, mais au final,... qui a donc besoin d'autant de connards ?

Hors ligne

#11 20-11-2015 20:54:34

Severian
Membre
Distrib. : Debian GNU/Linux 8.6 (jessie)
Noyau : Linux 4.6.0-0.bpo.1-amd64
(G)UI : Openbox 3.6.1-2
Inscription : 13-12-2014

Re : Comprendre les messages dans le kern.log

et sinon

dmesg -k -l "alert,crit,err,warn"


"il est urgent d'attendre" (bendia)
ob3-debian2-150x50.png

Hors ligne

#12 20-11-2015 21:26:32

golgot200
Membre
Lieu : AIN
Distrib. : Debian Jessie
Noyau : Linux debian 3.16.0-4-amd64
(G)UI : MATE
Inscription : 05-08-2007

Re : Comprendre les messages dans le kern.log

Bonsoir Severian

Là, c'est moins bon :


patrick@debian:~$ dmesg -k -l "alert,crit,err,warn"
[    0.000000] ACPI: RSDP 0x00000000000F82E0 000024 (v02 Nvidia)
[    0.000000] ACPI: XSDT 0x00000000BFEE3100 00004C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI: FACP 0x00000000BFEEBA80 0000F4 (v03 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aEventBlock: 32/8 (20150619/tbfadt-623)
[    0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/8 (20150619/tbfadt-623)
[    0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/PmTimerBlock: 32/8 (20150619/tbfadt-623)
[    0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/8 (20150619/tbfadt-623)
[    0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe1Block: 128/8 (20150619/tbfadt-623)
[    0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aEventBlock: 8, using default 32 (20150619/tbfadt-704)
[    0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 8, using default 16 (20150619/tbfadt-704)
[    0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/PmTimerBlock: 8, using default 32 (20150619/tbfadt-704)
[    0.000000] ACPI: DSDT 0x00000000BFEE3280 008786 (v01 NVIDIA AWRDACPI 00001000 MSFT 03000000)
[    0.000000] ACPI: FACS 0x00000000BFEE0000 000040
[    0.000000] ACPI: FACS 0x00000000BFEE0000 000040
[    0.000000] ACPI: SSDT 0x00000000BFEEBCC0 00030E (v01 PTLTD  POWERNOW 00000001  LTP 00000001)
[    0.000000] ACPI: HPET 0x00000000BFEEC040 000038 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000098)
[    0.000000] ACPI: MCFG 0x00000000BFEEC0C0 00003C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI: APIC 0x00000000BFEEBBC0 000098 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[    0.013488] ACPI: All ACPI Tables successfully acquired
[    0.172360] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.189800] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580)
[    0.207565] ACPI: Enabled 1 GPEs in block 20 to 5F
[    0.224568] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
[    0.296314] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
[    0.586356] microcode: AMD CPU family 0xf not supported
[    0.588919] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.623958] ACPI: Invalid passive threshold
[    0.633907] ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16
[    0.634975] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[    0.688068] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
[    0.688936] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
[    0.689380] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20
[    0.690283] ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 23
[    0.691196] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
[    1.212742] ACPI: PCI Interrupt Link [AMC1] enabled at IRQ 21
[   10.949444] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C7F conflicts with OpRegion 0x0000000000001C40-0x0000000000001C45 (\_SB_.PCI0.SM01) (20150619/utaddress-254)
[   10.949450] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C7F conflicts with OpRegion 0x0000000000001C40-0x0000000000001C45 (\_SB_.PCI0.SM00) (20150619/utaddress-254)
[   10.969657] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[   11.736536] ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16
[   11.748320] ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16
[   11.886156] nouveau W[     PFB][0000:01:00.0][0x00000000] reclocking of this ram type unsupported
[   11.935208] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
patrick@debian:~$

 


L'ultime question ... l'intelligence a besoin de la bêtise pour s'affirmer, la beauté a besoin de la laideur pour resplendir, le courage nait dans la peur, les forts impressionnent au millieu des faibles, mais au final,... qui a donc besoin d'autant de connards ?

Hors ligne

#13 20-11-2015 22:22:56

Severian
Membre
Distrib. : Debian GNU/Linux 8.6 (jessie)
Noyau : Linux 4.6.0-0.bpo.1-amd64
(G)UI : Openbox 3.6.1-2
Inscription : 13-12-2014

Re : Comprendre les messages dans le kern.log

le plus important c'est

dmesg -k -l "alert,crit,err"



après les "warning" ... je ne pense pas que tu puisse passer à coté wink
pas la peine de se passer la rate au cour-bouillon pour autant tongue


"il est urgent d'attendre" (bendia)
ob3-debian2-150x50.png

Hors ligne

#14 20-11-2015 23:09:00

golgot200
Membre
Lieu : AIN
Distrib. : Debian Jessie
Noyau : Linux debian 3.16.0-4-amd64
(G)UI : MATE
Inscription : 05-08-2007

Re : Comprendre les messages dans le kern.log

Je viens d'installer le nvidia-driver :

Avec "alert,crit,err,warn"


patrick@debian:~$

dmesg -k -l "alert,crit,err,warn



[    0.000000] ACPI: RSDP 0x00000000000F82E0 000024 (v02 Nvidia)
[    0.000000] ACPI: XSDT 0x00000000BFEE3100 00004C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI: FACP 0x00000000BFEEBA80 0000F4 (v03 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aEventBlock: 32/8 (20150619/tbfadt-623)
[    0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/8 (20150619/tbfadt-623)
[    0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/PmTimerBlock: 32/8 (20150619/tbfadt-623)
[    0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/8 (20150619/tbfadt-623)
[    0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe1Block: 128/8 (20150619/tbfadt-623)
[    0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aEventBlock: 8, using default 32 (20150619/tbfadt-704)
[    0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 8, using default 16 (20150619/tbfadt-704)
[    0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/PmTimerBlock: 8, using default 32 (20150619/tbfadt-704)
[    0.000000] ACPI: DSDT 0x00000000BFEE3280 008786 (v01 NVIDIA AWRDACPI 00001000 MSFT 03000000)
[    0.000000] ACPI: FACS 0x00000000BFEE0000 000040
[    0.000000] ACPI: FACS 0x00000000BFEE0000 000040
[    0.000000] ACPI: SSDT 0x00000000BFEEBCC0 00030E (v01 PTLTD  POWERNOW 00000001  LTP 00000001)
[    0.000000] ACPI: HPET 0x00000000BFEEC040 000038 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000098)
[    0.000000] ACPI: MCFG 0x00000000BFEEC0C0 00003C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI: APIC 0x00000000BFEEBBC0 000098 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[    0.013711] ACPI: All ACPI Tables successfully acquired
[    0.172361] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.189448] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580)
[    0.207552] ACPI: Enabled 1 GPEs in block 20 to 5F
[    0.224608] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
[    0.296314] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
[    0.575928] microcode: AMD CPU family 0xf not supported
[    0.578596] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.617407] ACPI: Invalid passive threshold
[    0.630375] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[    0.631669] ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16
[    0.682680] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
[    0.684072] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20
[    0.684696] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
[    0.685289] ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 23
[    0.687063] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
[    1.208831] ACPI: PCI Interrupt Link [AMC1] enabled at IRQ 21
[   12.919510] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C7F conflicts with OpRegion 0x0000000000001C40-0x0000000000001C45 (\_SB_.PCI0.SM01) (20150619/utaddress-254)
[   12.919515] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C7F conflicts with OpRegion 0x0000000000001C40-0x0000000000001C45 (\_SB_.PCI0.SM00) (20150619/utaddress-254)
[   13.415195] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[   14.737865] nvidia: module license 'NVIDIA' taints kernel.
[   14.737871] Disabling lock debugging due to kernel taint
[   14.761316] ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16
[   14.762079] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  340.93  Wed Aug 19 16:49:15 PDT 2015
[   14.913840] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
patrick@debian:~$

 



Avec "alert,crit,err"


patrick@debian:~/Bureau$

dmesg -k -l "alert,crit,err



patrick@debian:~/Bureau$
 



J'ai rien smile


L'ultime question ... l'intelligence a besoin de la bêtise pour s'affirmer, la beauté a besoin de la laideur pour resplendir, le courage nait dans la peur, les forts impressionnent au millieu des faibles, mais au final,... qui a donc besoin d'autant de connards ?

Hors ligne

#15 20-11-2015 23:13:26

Severian
Membre
Distrib. : Debian GNU/Linux 8.6 (jessie)
Noyau : Linux 4.6.0-0.bpo.1-amd64
(G)UI : Openbox 3.6.1-2
Inscription : 13-12-2014

Re : Comprendre les messages dans le kern.log

je pense que certains "warning" peuvent être corrigé avec quelques recherches internet, mais ça n'empêchera pas le système de fonctionner en attendant smile

"il est urgent d'attendre" (bendia)
ob3-debian2-150x50.png

Hors ligne

#16 20-11-2015 23:40:54

golgot200
Membre
Lieu : AIN
Distrib. : Debian Jessie
Noyau : Linux debian 3.16.0-4-amd64
(G)UI : MATE
Inscription : 05-08-2007

Re : Comprendre les messages dans le kern.log

Après recherche, effectivement rien de grave et parfois même des bugs dans certains programmes qui génèrent des warnings

L'ultime question ... l'intelligence a besoin de la bêtise pour s'affirmer, la beauté a besoin de la laideur pour resplendir, le courage nait dans la peur, les forts impressionnent au millieu des faibles, mais au final,... qui a donc besoin d'autant de connards ?

Hors ligne

Pied de page des forums