Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#26 21-10-2016 20:46:00

robert2a
Membre
Lieu : France
Distrib. : Stretch
Noyau : Linux 4.8.0-1-amd64
(G)UI : Mate 1.16.1
Inscription : 15-11-2014

Re : Deuxième écran HDMI non reconnu / bug / carte graphique ?

chalu a écrit :

Est qu'il devrait avoir un retour évoquant HDMI pour la commande lpsci si la sortie HDMI est gérée par la carte intégrée Intel ?
Il n'y en a pas dans son retour message #12. Si ce n'est pas normal, ça pourrait inciter dans ce cas à mettre le noyau des backports ?



la machine est de 2011 , je vois pas trop l'interet .

par contre la commande lspci donne le détail des sorties vidéo ?   ( une commande spéciale ? )

pour tester les sorties , démarrer sur le conecteur hdmi uniquement puis sur le connecteur vga (ou dvi ), si dans les 2 cas le moniteur fonctionne , reste plus qu a faire fonctionner les deux ensemble  smile

ps: sur les portables il y a peut etre des restrictions sur l utilisation des sorties , sur un pc de bureau non juste le nombre maximum d'écran  utilisable (en général le minimum est de 2 )
peut etre voir la doc du portable .

un exemple sur une machine de bureau (Sky Lake ) model I3 6100  Apu 530


Processeur graphique ‡  Intel® HD Graphics 530
Fréquence graphique de base  350.00 MHz
Fréquence graphique dynamique maxi   1.05 GHz
Mémoire vidéo maxi du sous-ensemble graphique   64 GB
Sortie graphique  eDP/DP/HDMI/DVI
Prise en charge de 4K   Yes, at 60Hz
Résolution maximale (Intel® WiDi)‡  1080p
Résolution maximale (HDMI 1.4)‡  4096x2304@24Hz
Résolution maximale (DP)‡  4096x2304@60Hz
Résolution maximale (eDP – Écran plat intégré)‡   4096x2304@60Hz
Résolution maximale (VGA)‡   N/A
Prise en charge de DirectX*   12
Prise en charge de OpenGL*  4.4
Technologie Intel® Quick Sync Video
  Oui
Technologie Intel® InTru™ 3D   Oui
Intel® Wireless Display
  Oui
Technologie Intel® Clear Video HD  Oui
technologie Intel® Clear Video   Oui
Nb. d'écrans pris en charge ‡  3
ID de périphérique  0x1912
 



maximum 3 =>  Nb. d'écrans pris en charge ‡     3

Dernière modification par robert2a (21-10-2016 20:57:01)

Hors ligne

#27 21-10-2016 23:43:02

Strato
Membre
Distrib. : HandyLinux-2.5 = Debian 8.6 (jessie)
Noyau : Linux 3.16.0-4-amd64
(G)UI : XFCE
Inscription : 11-10-2016

Re : Deuxième écran HDMI non reconnu / bug / carte graphique ?

Cela ne viens pas des limitations du portable je pense car le second écran fonctionne sur W$10

Dernière modification par Strato (22-10-2016 00:01:54)

Hors ligne

#28 22-10-2016 08:05:35

chalu
Adhérent(e)
Lieu : Anjou
Distrib. : Debian Jessie (saveur Handylinux 2.5) à jour
Noyau : Linux 3.16.0-4-amd64
(G)UI : XFCE xfwm4
Inscription : 11-03-2016

Re : Deuxième écran HDMI non reconnu / bug / carte graphique ?

Il fonctionne avec laquelle des deux cartes sous Windows 10 ?

Dernière modification par chalu (22-10-2016 08:07:31)


Bien débuter sur Debian :
->Les cahiers du débutant
->Le projet DFlinux (DebianFacileLinux) deux images ISOs (i386 et amd64) basées sur Debian stable et agrémentées d'outils facilitants pour les débutants

Hors ligne

#29 22-10-2016 11:19:45

robert2a
Membre
Lieu : France
Distrib. : Stretch
Noyau : Linux 4.8.0-1-amd64
(G)UI : Mate 1.16.1
Inscription : 15-11-2014

Re : Deuxième écran HDMI non reconnu / bug / carte graphique ?

Strato a écrit :

Cela ne viens pas des limitations du portable je pense car le second écran fonctionne sur W$10



Ce que je pense depuis le début aussi , une installation propre de jessie avec un bureau mate pour commencer
regarder ce que dit le /var/log/Xorg.0.log , que le driver intel soit bien installé. (voir si le serveur X charge quelque chose a propos de la carte nvidia )
donner le contenu du fichier /etc/X11/xorg.conf  (et si il existe )

il ne devrait pas y avoir tous ces problèmes avec ces 2 écrans , sur une installation par défaut .
voila donner un minimum d'infos , pour comprendre ce qu il se passe.

nota: pour le test au dessus , brancher un  écran puis l autre , c'est pas un hasard , juste que pour vérifier que chaque écran fonctionne individuellement ainsi que la sortie (vga , dvi ou hdmi ). (ce qui devrait etre le cas puisque avec win10 tout est correct )

Hors ligne

#30 22-10-2016 11:49:24

PengouinPdt
Adhérent(e)
Lieu : 47 - France
Distrib. : Siduction
Noyau : Linux 4.6.2-towo.1-siduction-amd64
(G)UI : XFCE
Inscription : 09-02-2011
Site Web

Re : Deuxième écran HDMI non reconnu / bug / carte graphique ?

robert2a a écrit :

(...)

par contre la commande lspci donne le détail des sorties vidéo ?   ( une commande spéciale ? )



Normalement :

lspci -vnn | egrep -i "vga|3d|display"



(dsl, suis pas sous Debian là tongue )

robert2a a écrit :


pour tester les sorties , démarrer sur le conecteur hdmi uniquement puis sur le connecteur vga (ou dvi ), si dans les 2 cas le moniteur fonctionne , reste plus qu a faire fonctionner les deux ensemble  smile
(...)



Normalement, sur une machine ci-récente, il n'y a même pas besoin de la brancher ABSOLUMENT avant l'allumage ...
Maintenant ne fonctionnant qu'avec XFCE, principalement, je ne peux pas être aussi ABSOLU ... ce qui est sûr, c'est qu'avec le mode "Affichage" sous XFCE ... cela fait longtemps que je n'ai plus besoin de connecter, allumer l'écran externe avant ! Sans soucis, dans la session ...

Il faut peut-être envisagé une "défaillance matérielle" - déjà vu, du matos fonctionnant correctement sous Windows, et sous Linux, dysfonctionnant !

Hors ligne

#31 22-10-2016 12:05:05

chalu
Adhérent(e)
Lieu : Anjou
Distrib. : Debian Jessie (saveur Handylinux 2.5) à jour
Noyau : Linux 3.16.0-4-amd64
(G)UI : XFCE xfwm4
Inscription : 11-03-2016

Re : Deuxième écran HDMI non reconnu / bug / carte graphique ?

Je ne pense pas non plus que passer au bureau Mate soit le passage obligé.
Est-il certain que la sortie HDMI soit liée à la carte Intel ? En voyant ce genre de fil je penserais plutôt nvidia et dans ce cas installer les pilotes propriétaires.

Bien débuter sur Debian :
->Les cahiers du débutant
->Le projet DFlinux (DebianFacileLinux) deux images ISOs (i386 et amd64) basées sur Debian stable et agrémentées d'outils facilitants pour les débutants

Hors ligne

#32 22-10-2016 15:07:22

PengouinPdt
Adhérent(e)
Lieu : 47 - France
Distrib. : Siduction
Noyau : Linux 4.6.2-towo.1-siduction-amd64
(G)UI : XFCE
Inscription : 09-02-2011
Site Web

Re : Deuxième écran HDMI non reconnu / bug / carte graphique ?

En effet, intéressant ... mais à bien faire au-travers de Bumblebee comme c'est précisé !

À quand le projet "prime" sous Debian - d'autant qu'apparemment c'est aussi un logiciel libre ; moi pas comprendre !?

[source]

Dernière modification par PengouinPdt (22-10-2016 15:09:54)

Hors ligne

#33 22-10-2016 15:37:07

chalu
Adhérent(e)
Lieu : Anjou
Distrib. : Debian Jessie (saveur Handylinux 2.5) à jour
Noyau : Linux 3.16.0-4-amd64
(G)UI : XFCE xfwm4
Inscription : 11-03-2016

Re : Deuxième écran HDMI non reconnu / bug / carte graphique ?

Et je viens (peut-être) de réaliser pourquoi robert2a conseillait l'installation de mate, sans doute à cause du paquet :
https://packages.debian.org/stretch/mate-optimus
Il n'est pas valable pour jessie par contre.

Bien débuter sur Debian :
->Les cahiers du débutant
->Le projet DFlinux (DebianFacileLinux) deux images ISOs (i386 et amd64) basées sur Debian stable et agrémentées d'outils facilitants pour les débutants

Hors ligne

#34 22-10-2016 16:51:54

PengouinPdt
Adhérent(e)
Lieu : 47 - France
Distrib. : Siduction
Noyau : Linux 4.6.2-towo.1-siduction-amd64
(G)UI : XFCE
Inscription : 09-02-2011
Site Web

Re : Deuxième écran HDMI non reconnu / bug / carte graphique ?

Intéressante trouvaille @chalu.
À savoir, maintenant, si cela a le même propos que le projet "prime" sur LA distribution dérivée de Debian ?!
Quoiqu'il en soit, si mate s'y mets, alors les autres DE vont suivre, tel que XFCE, par exemple - il devrait suffire de l'installer pour en bénéficier - certes je m'avance un peu, mais cela serait étonnant le contraire.

Hors ligne

#35 22-10-2016 20:39:50

Strato
Membre
Distrib. : HandyLinux-2.5 = Debian 8.6 (jessie)
Noyau : Linux 3.16.0-4-amd64
(G)UI : XFCE
Inscription : 11-10-2016

Re : Deuxième écran HDMI non reconnu / bug / carte graphique ?

Bonjour bonjour,

Chalu écrit
Il fonctionne avec laquelle des deux cartes sous Windows 10 ? ... Est-il certain que la sortie HDMI soit liée à la carte Intel ? 

Je n'ai pas trouvé explicitement dans Windows la mention "HDMI" en cherchant. Mais j'ai peut-être trouvé quelques indications :
Dans W$, dans paramètre d'affichage avancé, j'ai le choix entre les deux écran, voici l'image :
file-R8efbb82b1af2ece29af36c2f9e98011b
en fonction que l'un ou l'autre des écran soit sélectionné lorsque je décent et vais dans "afficher les propriétés de l'adaptateur" j’obtiens ceci ceci :
- pour l'écran 1 (celui du PC)

file-R67bf78df2a499fc177307b062e06e512
- pour l'écran 2 (l'écran externe)
file-R464cd548c269dd0b306dbc57dc8e3242
- voici les noms des périphérique BIOS si ça peut être utile, je sais pas
file-R19bf93df37f3be38e6971ab80c530867
- information concernant l'emplacement
file-R563bf8ce0e5e8e2123db39d5ee34fd93

Dans gestionnaire de périphérique j'ai ceci en choisissant "Écran, moniteurs plug and play"
file-Ra366e0f428582f7c5bbeec85579164eb
En allant dans "cartes graphiques" j'obtiens les informations précédemment cité.

Dans la fenêtre "activité du processeur graphique NVIDIA" :
- lorsque les deux écran sont allumés (étendu) et que j'ouvre une application dans l'écran du PC, ou lorsque seul l'écran du PC est allumé j’obtiens : "aucune application en cours sur le ce processeur graphique"
file-R3c11935212b2f38132a8ec69e0215dde
- Cependant lorsque j'ouvre une application dans le second écran ou que seul le second écran est allumé j'obtiens "applications en cours d’exécution sur ce processeur graphique"
file-R82dae70e1c15fa8da7fddad1fca4bd72
- voici l'image lorsque j'ouvre "Intel panneau de configuration graphiques et média" dans le second écran
file-R678e7963c81f849b1ce6c1900700d564. De plus dans cette fenêtre dans l'onglet "écran" seul "écran intégré" apparaît.   

Je n'est pas trouvé de moyen autre que empirique déterminer qui gère quoi dans W$, cela me laisse à penser que Intel gère le premier écran et NVIDIA le second ? Je n'est pas trouvé de moyen autre que empirique pour le savoir.

robert2a écrit
« une installation propre de jessie avec un bureau mate pour commencer »

Je testerais ça dès que possible. J'ai essayé le "DF-Live" mon second écran ne s'affiche pas nom plus.

robert2a écrit
« regarder ce que dit le /var/log/Xorg.0.log , que le driver intel soit bien installé »

Lorsque je vais dans le fichier cité j’obtiens, (j'ai utilisé la balise "xorg_conf") :

[    15.593]
X.Org X Server 1.16.4
Release Date: 2014-12-20
[    15.593] X Protocol Version 11, Revision 0
[    15.593] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[    15.593] Current Operating System: Linux handylinux 3.16.0-4-amd64 #1 SMP Debian 3.16.36-1+deb8u2 (2016-10-19) x86_64
[    15.593] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 root=UUID=75c21c03-71d0-4361-a2fc-9cb0d7793aa2 ro quiet
[    15.593] Build Date: 11 February 2015  12:32:02AM
[    15.593] xorg-server 2:1.16.4-1 ([url]http://www.debian.org/support[/url])
[    15.593] Current version of pixman: 0.32.6
[    15.593]     Before reporting problems, check [url]http://wiki.x.org[/url]
    to make sure that you have the latest version.
[    15.593] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    15.593] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Oct 22 19:42:46 2016
[    15.633] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    15.642] (==) No Layout section.  Using the first Screen section.
[    15.642] (==) No screen section available. Using defaults.
[    15.642] (**) |-->Screen "Default Screen Section" (0)
[    15.642] (**) |   |-->Monitor "<default monitor>"
[    15.643] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
[    15.643] (==) Automatically adding devices
[    15.643] (==) Automatically enabling devices
[    15.643] (==) Automatically adding GPU devices
[    15.681] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    15.681]     Entry deleted from font path.
[    15.684] (==) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/100dpi/:unscaled,
    /usr/share/fonts/X11/75dpi/:unscaled,
    /usr/share/fonts/X11/Type1,
    /usr/share/fonts/X11/100dpi,
    /usr/share/fonts/X11/75dpi,
    built-ins
[    15.684] (==) ModulePath set to "/usr/lib/xorg/modules"
[    15.684] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[    15.684] (II) Loader magic: 0x7fc5b9ba0d80
[    15.684] (II) Module ABI versions:
[    15.684]     X.Org ANSI C Emulation: 0.4
[    15.684]     X.Org Video Driver: 18.0
[    15.684]     X.Org XInput driver : 21.0
[    15.684]     X.Org Server Extension : 8.0
[    15.685] (II) xfree86: Adding drm device (/dev/dri/card1)
[    15.685] (II) xfree86: Adding drm device (/dev/dri/card0)
[    15.688] (--) PCI:*(0:0:2:0) 8086:0116:1028:04b6 rev 9, Mem @ 0xf1400000/4194304, 0xe0000000/268435456, I/O @ 0x00004000/64
[    15.689] (--) PCI: (0:1:0:0) 10de:0df5:1028:04b6 rev 161, Mem @ 0xf0000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00003000/128, BIOS @ 0x????????/524288
[    15.689] (II) LoadModule: "glx"
[    15.701] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    15.943] (II) Module glx: vendor="X.Org Foundation"
[    15.943]     compiled for 1.16.4, module version = 1.0.0
[    15.943]     ABI class: X.Org Server Extension, version 8.0
[    15.943] (==) AIGLX enabled
[b][    15.943] (==) Matched intel as autoconfigured driver 0[/b]
[    15.943] (==) Matched nouveau as autoconfigured driver 1
[    15.943] (==) Matched nv as autoconfigured driver 2
[b][    15.943] (==) Matched intel as autoconfigured driver 3[/b]
[    15.943] (==) Matched modesetting as autoconfigured driver 4
[    15.943] (==) Matched fbdev as autoconfigured driver 5
[    15.943] (==) Matched vesa as autoconfigured driver 6
[    15.943] (==) Assigned the driver to the xf86ConfigLayout
[b][    15.943] (II) LoadModule: "intel"
[    15.945] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    15.989] (II) Module intel: vendor="X.Org Foundation"[/b]
[    15.989]     compiled for 1.15.99.904, module version = 2.21.15
[    15.989]     Module class: X.Org Video Driver
[    15.989]     ABI class: X.Org Video Driver, version 18.0
[    15.989] (II) LoadModule: "nouveau"
[    15.989] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[    16.017] (II) Module nouveau: vendor="X.Org Foundation"
[    16.017]     compiled for 1.16.0, module version = 1.0.11
[    16.017]     Module class: X.Org Video Driver
[    16.017]     ABI class: X.Org Video Driver, version 18.0
[    16.017] (II) LoadModule: "nv"
[    16.018] (WW) Warning, couldn't open module nv
[    16.018] (II) UnloadModule: "nv"
[    16.018] (II) Unloading nv
[    16.018] (EE) Failed to load module "nv" (module does not exist, 0)
[    16.018] (II) LoadModule: "modesetting"
[    16.018] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    16.030] (II) Module modesetting: vendor="X.Org Foundation"
[    16.030]     compiled for 1.16.4, module version = 0.9.0
[    16.030]     Module class: X.Org Video Driver
[    16.030]     ABI class: X.Org Video Driver, version 18.0
[    16.031] (II) LoadModule: "fbdev"
[    16.031] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    16.032] (II) Module fbdev: vendor="X.Org Foundation"
[    16.032]     compiled for 1.15.99.904, module version = 0.4.4
[    16.032]     Module class: X.Org Video Driver
[    16.032]     ABI class: X.Org Video Driver, version 18.0
[    16.032] (II) LoadModule: "vesa"
[    16.033] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    16.039] (II) Module vesa: vendor="X.Org Foundation"
[    16.039]     compiled for 1.15.99.904, module version = 2.3.3
[    16.039]     Module class: X.Org Video Driver
[    16.039]     ABI class: X.Org Video Driver, version 18.0
[b][    16.039] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:[/b]

    i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
    915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
    Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
    GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
    HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
    HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
    HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
    HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
[    16.041] (II) NOUVEAU driver Date:   Thu Aug 28 03:57:48 2014 +0200
[b][    16.041] (II) NOUVEAU driver for NVIDIA chipset families :[/b]

[    16.041]     RIVA TNT        (NV04)
[    16.041]     RIVA TNT2       (NV05)
[    16.041]     GeForce 256     (NV10)
[    16.041]     GeForce 2       (NV11, NV15)
[    16.041]     GeForce 4MX     (NV17, NV18)
[    16.041]     GeForce 3       (NV20)
[    16.042]     GeForce 4Ti     (NV25, NV28)
[    16.042]     GeForce FX      (NV3x)
[    16.042]     GeForce 6       (NV4x)
[    16.042]     GeForce 7       (G7x)
[    16.042]     GeForce 8       (G8x)
[    16.042]     GeForce GTX 200 (NVA0)
[    16.042]     GeForce GTX 400 (NVC0)
[    16.042] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    16.042] (II) FBDEV: driver for framebuffer: fbdev
[    16.042] (II) VESA: driver for VESA chipsets: vesa
[    16.042] (++) using VT number 7
[    16.060] (II) [drm] nouveau interface version: 1.1.2
[    16.060] (WW) Falling back to old probe method for modesetting
[    16.060] (WW) Falling back to old probe method for fbdev
[    16.060] (II) Loading sub module "fbdevhw"
[    16.060] (II) LoadModule: "fbdevhw"
[    16.061] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    16.075] (II) Module fbdevhw: vendor="X.Org Foundation"
[    16.075]     compiled for 1.16.4, module version = 0.0.2
[    16.075]     ABI class: X.Org Video Driver, version 18.0
[    16.075] (WW) Falling back to old probe method for vesa
[b][    16.075] (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
[    16.075] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    16.075] (==) intel(0): RGB weight 888
[    16.075] (==) intel(0): Default visual is TrueColor
[    16.075] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 3000
[    16.075] (**) intel(0): Relaxed fencing enabled
[    16.075] (**) intel(0): Wait on SwapBuffers? enabled
[    16.075] (**) intel(0): Triple buffering? enabled
[    16.076] (**) intel(0): Framebuffer tiled
[    16.076] (**) intel(0): Pixmaps tiled
[    16.076] (**) intel(0): 3D buffers tiled
[    16.076] (**) intel(0): SwapBuffers wait enabled
[    16.076] (==) intel(0): video overlay key set to 0x101fe
[    16.076] (II) intel(0): Output LVDS1 has no monitor section
[    16.076] (--) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[    16.108] (II) intel(0): Output VGA1 has no monitor section
[    16.109] (II) intel(0): Output HDMI1 has no monitor section
[    16.109] (II) intel(0): Output DP1 has no monitor section
[    16.109] (II) intel(0): EDID for output LVDS1
[    16.109] (II) intel(0): Manufacturer: SEC  Model: 5441  Serial#: 0
[    16.109] (II) intel(0): Year: 2010  Week: 0
[    16.109] (II) intel(0): EDID Version: 1.3
[    16.109] (II) intel(0): Digital Display Input
[    16.109] (II) intel(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[    16.109] (II) intel(0): Gamma: 2.20
[    16.109] (II) intel(0): No DPMS capabilities specified
[    16.109] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[    16.109] (II) intel(0): First detailed timing is preferred mode
[    16.109] (II) intel(0): redX: 0.620 redY: 0.340   greenX: 0.330 greenY: 0.570
[    16.109] (II) intel(0): blueX: 0.150 blueY: 0.060   whiteX: 0.313 whiteY: 0.329
[    16.109] (II) intel(0): Manufacturer's mask: 0
[    16.109] (II) intel(0): Supported detailed timing:
[    16.109] (II) intel(0): clock: 71.6 MHz   Image Size:  344 x 194 mm
[    16.109] (II) intel(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1510 h_border: 0
[    16.109] (II) intel(0): v_active: 768  v_sync: 770  v_sync_end 775 v_blanking: 789 v_border: 0
[    16.109] (II) intel(0): Supported detailed timing:
[    16.109] (II) intel(0): clock: 71.6 MHz   Image Size:  344 x 194 mm
[    16.109] (II) intel(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1510 h_border: 0
[    16.109] (II) intel(0): v_active: 768  v_sync: 770  v_sync_end 775 v_blanking: 789 v_border: 0
[    16.109] (II) intel(0):  8MN61€156AT
[    16.109] (II) intel(0): Unknown vendor-specific block 0
[    16.109] (II) intel(0): EDID (in hex):
[    16.109] (II) intel(0):     00ffffffffffff004ca3415400000000
[    16.109] (II) intel(0):     00140103902213780ac8959e57549226
[    16.109] (II) intel(0):     0f505400000001010101010101010101
[    16.110] (II) intel(0):     010101010101f41b5690500015303020
[    16.110] (II) intel(0):     250058c21000001af41b569050001530
[    16.110] (II) intel(0):     3020250058c21000001a000000fe0038
[    16.110] (II) intel(0):     4d4e36318031353641540a2000000000
[    16.110] (II) intel(0):     00000000000000000001010a2020001d
[    16.110] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[    16.110] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    16.110] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    16.110] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[    16.110] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[    16.110] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[    16.110] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[    16.110] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[    16.110] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[    16.110] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[    16.110] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[    16.110] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[    16.110] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[    16.110] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[    16.110] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[    16.110] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[    16.110] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[    16.110] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[    16.110] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[    16.110] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[    16.110] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[    16.110] (II) intel(0): Printing probed modes for output LVDS1
[    16.110] (II) intel(0): Modeline "1366x768"x60.1   71.56  1366 1414 1446 1510  768 770 775 789 +hsync -vsync (47.4 kHz eP)
[    16.110] (II) intel(0): Modeline "1360x768"x59.8   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsync (47.7 kHz d)
[    16.110] (II) intel(0): Modeline "1360x768"x60.0   72.00  1360 1408 1440 1520  768 771 781 790 +hsync -vsync (47.4 kHz d)
[    16.110] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[    16.110] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    16.110] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    16.110] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[    16.140] (II) intel(0): EDID for output VGA1
[    16.141] (II) intel(0): EDID for output HDMI1
[    16.141] (II) intel(0): EDID for output DP1
[    16.141] (II) intel(0): Output LVDS1 connected
[    16.141] (II) intel(0): Output VGA1 disconnected
[    16.141] (II) intel(0): Output HDMI1 disconnected
[    16.141] (II) intel(0): Output DP1 disconnected
[    16.141] (II) intel(0): Using exact sizes for initial modes
[    16.141] (II) intel(0): Output LVDS1 using initial mode 1366x768
[    16.141] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    16.141] (II) intel(0): Kernel page flipping support detected, enabling
[    16.141] (==) intel(0): DPI set to (96, 96)[/b]
[    16.141] (II) Loading sub module "fb"
[    16.141] (II) LoadModule: "fb"
[    16.141] (II) Loading /usr/lib/xorg/modules/libfb.so
[    16.149] (II) Module fb: vendor="X.Org Foundation"
[    16.149]     compiled for 1.16.4, module version = 1.0.0
[    16.149]     ABI class: X.Org ANSI C Emulation, version 0.4
[    16.149] (II) Loading sub module "dri2"
[    16.149] (II) LoadModule: "dri2"
[    16.149] (II) Module "dri2" already built-in
[    16.149] (II) Loading sub module "dri2"
[    16.149] (II) LoadModule: "dri2"
[    16.149] (II) Module "dri2" already built-in
[b][    16.149] (--) NOUVEAU(G0): Chipset: "NVIDIA NVC1"[/b]
[    16.149] (==) NOUVEAU(G0): Depth 24, (--) framebuffer bpp 32
[    16.149] (==) NOUVEAU(G0): RGB weight 888
[    16.149] (==) NOUVEAU(G0): Default visual is TrueColor
[    16.149] (==) NOUVEAU(G0): Using HW cursor
[    16.149] (==) NOUVEAU(G0): GLX sync to VBlank enabled.
[    16.149] (==) NOUVEAU(G0): Page flipping enabled
[    16.149] (==) NOUVEAU(G0): Swap limit set to 1 [Max allowed 2]
[    16.149] (==) NOUVEAU(G0): Page flipping synced to vblank by kernel.
[    16.149] (II) NOUVEAU(G0): Initializing outputs ...
[    16.160] (II) NOUVEAU(G0): Output VGA-1-2 has no monitor section
[    16.221] (II) NOUVEAU(G0): Output HDMI-1-2 has no monitor section
[    16.221] (II) NOUVEAU(G0): 2 crtcs needed for screen.
[    16.226] (II) NOUVEAU(G0): Allocated crtc nr. 0 to this screen.
[    16.226] (II) NOUVEAU(G0): Allocated crtc nr. 1 to this screen.
[    16.237] (II) NOUVEAU(G0): EDID for output VGA-1-2
[    16.237] (II) NOUVEAU(G0): Printing probed modes for output VGA-1-2
[    16.237] (II) NOUVEAU(G0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    16.237] (II) NOUVEAU(G0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    16.237] (II) NOUVEAU(G0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    16.237] (II) NOUVEAU(G0): Modeline "848x480"x60.0   33.75  848 864 976 1088  480 486 494 517 +hsync +vsync (31.0 kHz e)
[    16.237] (II) NOUVEAU(G0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 489 492 525 -hsync -vsync (31.5 kHz e)
[    16.297] (II) NOUVEAU(G0): EDID for output HDMI-1-2
[    16.297] (II) NOUVEAU(G0): Manufacturer: IVM  Model: 6113  Serial#: 2214
[    16.297] (II) NOUVEAU(G0): Year: 2014  Week: 41
[    16.297] (II) NOUVEAU(G0): EDID Version: 1.3
[    16.297] (II) NOUVEAU(G0): Digital Display Input
[    16.297] (II) NOUVEAU(G0): Max Image Size [cm]: horiz.: 53  vert.: 30
[    16.297] (II) NOUVEAU(G0): Gamma: 2.20
[    16.297] (II) NOUVEAU(G0): DPMS capabilities: Off
[    16.297] (II) NOUVEAU(G0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[    16.297] (II) NOUVEAU(G0): First detailed timing is preferred mode
[    16.297] (II) NOUVEAU(G0): redX: 0.645 redY: 0.332   greenX: 0.315 greenY: 0.619
[    16.297] (II) NOUVEAU(G0): blueX: 0.151 blueY: 0.065   whiteX: 0.313 whiteY: 0.329
[    16.297] (II) NOUVEAU(G0): Supported established timings:
[    16.297] (II) NOUVEAU(G0): 640x480@60Hz
[    16.297] (II) NOUVEAU(G0): 640x480@67Hz
[    16.297] (II) NOUVEAU(G0): 800x600@56Hz
[    16.297] (II) NOUVEAU(G0): 800x600@60Hz
[    16.297] (II) NOUVEAU(G0): 1024x768@60Hz
[    16.297] (II) NOUVEAU(G0): Manufacturer's mask: 0
[    16.297] (II) NOUVEAU(G0): Supported standard timings:
[    16.297] (II) NOUVEAU(G0): #0: hsize: 1152  vsize 720  refresh: 60  vid: 113
[    16.297] (II) NOUVEAU(G0): #1: hsize: 1280  vsize 960  refresh: 60  vid: 16513
[    16.297] (II) NOUVEAU(G0): #2: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    16.297] (II) NOUVEAU(G0): #3: hsize: 1600  vsize 1200  refresh: 60  vid: 16553
[    16.297] (II) NOUVEAU(G0): #4: hsize: 1680  vsize 1050  refresh: 60  vid: 179
[    16.297] (II) NOUVEAU(G0): #5: hsize: 1440  vsize 900  refresh: 60  vid: 149
[    16.297] (II) NOUVEAU(G0): #6: hsize: 1920  vsize 1080  refresh: 60  vid: 49361
[    16.297] (II) NOUVEAU(G0): Supported detailed timing:
[    16.297] (II) NOUVEAU(G0): clock: 148.5 MHz   Image Size:  531 x 299 mm
[    16.297] (II) NOUVEAU(G0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[    16.297] (II) NOUVEAU(G0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[    16.297] (II) NOUVEAU(G0): Serial No: 1127844122214
[    16.297] (II) NOUVEAU(G0): Ranges: V min: 55 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
[    16.297] (II) NOUVEAU(G0): Monitor name: PLE2483H
[    16.297] (II) NOUVEAU(G0): Supported detailed timing:
[    16.297] (II) NOUVEAU(G0): clock: 148.5 MHz   Image Size:  531 x 299 mm
[    16.297] (II) NOUVEAU(G0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[    16.297] (II) NOUVEAU(G0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[    16.297] (II) NOUVEAU(G0): Supported detailed timing:
[    16.297] (II) NOUVEAU(G0): clock: 74.2 MHz   Image Size:  531 x 299 mm
[    16.297] (II) NOUVEAU(G0): h_active: 1920  h_sync: 2448  h_sync_end 2492 h_blank_end 2640 h_border: 0
[    16.297] (II) NOUVEAU(G0): v_active: 540  v_sync: 542  v_sync_end 547 v_blanking: 562 v_border: 0
[    16.297] (II) NOUVEAU(G0): Supported detailed timing:
[    16.297] (II) NOUVEAU(G0): clock: 74.2 MHz   Image Size:  531 x 299 mm
[    16.297] (II) NOUVEAU(G0): h_active: 1280  h_sync: 1720  h_sync_end 1760 h_blank_end 1980 h_border: 0
[    16.297] (II) NOUVEAU(G0): v_active: 720  v_sync: 725  v_sync_end 730 v_blanking: 750 v_border: 0
[    16.297] (II) NOUVEAU(G0): Supported detailed timing:
[    16.297] (II) NOUVEAU(G0): clock: 27.0 MHz   Image Size:  531 x 299 mm
[    16.298] (II) NOUVEAU(G0): h_active: 720  h_sync: 732  h_sync_end 796 h_blank_end 864 h_border: 0
[    16.298] (II) NOUVEAU(G0): v_active: 576  v_sync: 581  v_sync_end 586 v_blanking: 625 v_border: 0
[    16.298] (II) NOUVEAU(G0): Supported detailed timing:
[    16.298] (II) NOUVEAU(G0): clock: 148.5 MHz   Image Size:  531 x 299 mm
[    16.298] (II) NOUVEAU(G0): h_active: 1920  h_sync: 2448  h_sync_end 2492 h_blank_end 2640 h_border: 0
[    16.298] (II) NOUVEAU(G0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[    16.298] (II) NOUVEAU(G0): Number of EDID sections to follow: 1
[    16.298] (II) NOUVEAU(G0): EDID (in hex):
[    16.298] (II) NOUVEAU(G0):     00ffffffffffff0026cd1361a6080000
[    16.298] (II) NOUVEAU(G0):     2918010380351e782a0ef5a555509e26
[    16.298] (II) NOUVEAU(G0):     105054330800710081408180a940b300
[    16.298] (II) NOUVEAU(G0):     9500d1c00101023a801871382d40582c
[    16.298] (II) NOUVEAU(G0):     4500132b2100001e000000ff00313132
[    16.298] (II) NOUVEAU(G0):     37383434313232323134000000fd0037
[    16.298] (II) NOUVEAU(G0):     4c1e5311000a202020202020000000fc
[    16.298] (II) NOUVEAU(G0):     00504c4532343833480a20202020012d
[    16.298] (II) NOUVEAU(G0):     020322f14f9005040302011112131406
[    16.298] (II) NOUVEAU(G0):     0715161f230907018301000065030c00
[    16.298] (II) NOUVEAU(G0):     1000023a801871382d40582c4500132b
[    16.298] (II) NOUVEAU(G0):     2100001f011d80d0721c1620102c2580
[    16.298] (II) NOUVEAU(G0):     132b2100009e011d00bc52d01e20b828
[    16.298] (II) NOUVEAU(G0):     5540132b2100001e8c0ad09020403120
[    16.298] (II) NOUVEAU(G0):     0c405500132b21000018023a80d07238
[    16.298] (II) NOUVEAU(G0):     2d40102c4580132b2100001e000000d0
[    16.298] (II) NOUVEAU(G0): Printing probed modes for output HDMI-1-2
[    16.298] (II) NOUVEAU(G0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    16.298] (II) NOUVEAU(G0): Modeline "1920x1080"x50.0  148.50  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[    16.298] (II) NOUVEAU(G0): Modeline "1920x1080"x59.9  148.35  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[    16.298] (II) NOUVEAU(G0): Modeline "1920x1080i"x60.0   74.25  1920 2008 2052 2200  1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[    16.298] (II) NOUVEAU(G0): Modeline "1920x1080i"x50.0   74.25  1920 2448 2492 2640  1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[    16.298] (II) NOUVEAU(G0): Modeline "1920x1080i"x59.9   74.18  1920 2008 2052 2200  1080 1084 1094 1125 interlace +hsync +vsync (33.7 kHz e)
[    16.298] (II) NOUVEAU(G0): Modeline "1600x1200"x60.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[    16.298] (II) NOUVEAU(G0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[    16.298] (II) NOUVEAU(G0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    16.298] (II) NOUVEAU(G0): Modeline "1440x900"x59.9   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[    16.298] (II) NOUVEAU(G0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[    16.298] (II) NOUVEAU(G0): Modeline "1280x720"x60.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[    16.298] (II) NOUVEAU(G0): Modeline "1280x720"x50.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz e)
[    16.298] (II) NOUVEAU(G0): Modeline "1280x720"x59.9   74.18  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[    16.298] (II) NOUVEAU(G0): Modeline "1152x720"x60.0   67.28  1152 1208 1328 1504  720 721 724 746 -hsync +vsync (44.7 kHz)
[    16.298] (II) NOUVEAU(G0): Modeline "1440x576i"x50.0   27.00  1440 1464 1590 1728  576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[    16.298] (II) NOUVEAU(G0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    16.298] (II) NOUVEAU(G0): Modeline "1440x480i"x60.0   27.03  1440 1478 1602 1716  480 488 494 525 interlace -hsync -vsync (15.8 kHz e)
[    16.298] (II) NOUVEAU(G0): Modeline "1440x480i"x59.9   27.00  1440 1478 1602 1716  480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[    16.298] (II) NOUVEAU(G0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    16.298] (II) NOUVEAU(G0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    16.298] (II) NOUVEAU(G0): Modeline "720x576"x50.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz e)
[    16.298] (II) NOUVEAU(G0): Modeline "720x480"x60.0   27.03  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[    16.298] (II) NOUVEAU(G0): Modeline "720x480"x59.9   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[    16.298] (II) NOUVEAU(G0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    16.298] (II) NOUVEAU(G0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    16.298] (II) NOUVEAU(G0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    16.298] (II) NOUVEAU(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    16.298] (--) NOUVEAU(G0): Virtual size is 1024x768 (pitch 0)
[    16.298] (**) NOUVEAU(G0):  Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[    16.298] (II) NOUVEAU(G0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    16.298] (**) NOUVEAU(G0):  Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[    16.298] (II) NOUVEAU(G0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    16.298] (**) NOUVEAU(G0):  Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[    16.298] (II) NOUVEAU(G0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    16.298] (**) NOUVEAU(G0):  Driver mode "848x480": 33.8 MHz (scaled from 0.0 MHz), 31.0 kHz, 60.0 Hz
[    16.298] (II) NOUVEAU(G0): Modeline "848x480"x60.0   33.75  848 864 976 1088  480 486 494 517 +hsync +vsync (31.0 kHz e)
[    16.298] (**) NOUVEAU(G0):  Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 59.9 Hz
[    16.298] (II) NOUVEAU(G0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 489 492 525 -hsync -vsync (31.5 kHz e)
[    16.298] (==) NOUVEAU(G0): DPI set to (96, 96)
[    16.298] (II) Loading sub module "fb"
[    16.298] (II) LoadModule: "fb"
[    16.298] (II) Loading /usr/lib/xorg/modules/libfb.so
[    16.298] (II) Module fb: vendor="X.Org Foundation"
[    16.298]     compiled for 1.16.4, module version = 1.0.0
[    16.298]     ABI class: X.Org ANSI C Emulation, version 0.4
[    16.298] (II) Loading sub module "shadowfb"
[    16.298] (II) LoadModule: "shadowfb"
[    16.298] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[    16.304] (II) Module shadowfb: vendor="X.Org Foundation"
[    16.304]     compiled for 1.16.4, module version = 1.0.0
[    16.304]     ABI class: X.Org ANSI C Emulation, version 0.4
[    16.304] (II) UnloadModule: "modesetting"
[    16.304] (II) Unloading modesetting
[    16.304] (II) UnloadModule: "fbdev"
[    16.304] (II) Unloading fbdev
[    16.304] (II) UnloadSubModule: "fbdevhw"
[    16.304] (II) Unloading fbdevhw
[    16.304] (II) UnloadModule: "vesa"
[    16.304] (II) Unloading vesa
[    16.305] (==) Depth 24 pixmap format is 32 bpp
[    16.309] (II) NOUVEAU(G0): Channel setup complete.
[    16.311] (II) NOUVEAU(G0): [COPY] async initialised.
[    16.312] (II) NOUVEAU(G0): [DRI2] Setup complete
[    16.312] (II) NOUVEAU(G0): [DRI2]   DRI driver: nouveau
[    16.312] (II) NOUVEAU(G0): [DRI2]   VDPAU driver: nouveau
[    16.314] (II) Loading sub module "exa"
[    16.314] (II) LoadModule: "exa"
[    16.314] (II) Loading /usr/lib/xorg/modules/libexa.so
[    16.327] (II) Module exa: vendor="X.Org Foundation"
[    16.327]     compiled for 1.16.4, module version = 2.6.0
[    16.327]     ABI class: X.Org Video Driver, version 18.0
[    16.328] (II) EXA(256): Driver allocated offscreen pixmaps
[    16.328] (II) EXA(256): Driver registered support for the following operations:
[    16.328] (II)         Solid
[    16.328] (II)         Copy
[    16.328] (II)         Composite (RENDER acceleration)
[    16.328] (II)         UploadToScreen
[    16.328] (II)         DownloadFromScreen
[    16.328] (==) NOUVEAU(G0): Backing store enabled
[    16.328] (==) NOUVEAU(G0): Silken mouse enabled
[    16.329] (II) NOUVEAU(G0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[    16.329] (II) NOUVEAU(G0): [XvMC] Extension initialized.
[    16.329] (==) NOUVEAU(G0): DPMS enabled
[    16.329] (II) NOUVEAU(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
[b][    16.330] (II) intel(0): [DRI2] Setup complete
[    16.330] (II) intel(0): [DRI2]   DRI driver: i965
[    16.330] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled[/b]
[    16.331] (II) UXA(0): Driver registered support for the following operations:
[    16.331] (II)         solid
[    16.331] (II)         copy
[    16.331] (II)         composite (RENDER acceleration)
[    16.331] (II)         put_image
[    16.332] (II)         get_image
[b][    16.332] (==) intel(0): Backing store enabled
[    16.332] (==) intel(0): Silken mouse enabled
[    16.332] (II) intel(0): Initializing HW Cursor
[    16.332] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    16.332] (==) intel(0): DPMS enabled
[    16.332] (==) intel(0): Intel XvMC decoder enabled
[    16.332] (II) intel(0): Set up textured video
[    16.332] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[    16.332] (II) intel(0): direct rendering: DRI2 Enabled
[    16.332] (==) intel(0): hotplug detection: "enabled"[/b]
[    16.356] (--) RandR disabled
[    16.367] (II) SELinux: Disabled on system
[    16.526] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    16.526] (II) AIGLX: enabled GLX_ARB_create_context
[    16.526] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    16.526] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[b][    16.526] (II) AIGLX: enabled GLX_INTEL_swap_event[/b]
[    16.526] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    16.526] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[    16.527] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[    16.527] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    16.527] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[    16.527] (II) AIGLX: Loaded and initialized i965
[    16.527] (II) GLX: Initialized DRI2 GL provider for screen 0
[    16.528] (II) NOUVEAU(G0): NVEnterVT is called.
[b][    16.529] (II) intel(0): Setting screen physical size to 361 x 203[/b]
[    16.861] (II) config/udev: Adding input device Power Button (/dev/input/event7)
[    16.861] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    16.861] (II) LoadModule: "evdev"
[    16.862] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    16.894] (II) Module evdev: vendor="X.Org Foundation"
[    16.894]     compiled for 1.16.0, module version = 2.9.0
[    16.894]     Module class: X.Org XInput Driver
[    16.894]     ABI class: X.Org XInput driver, version 21.0
[    16.894] (II) Using input driver 'evdev' for 'Power Button'
[    16.894] (**) Power Button: always reports core events
[    16.894] (**) evdev: Power Button: Device: "/dev/input/event7"
[    16.895] (--) evdev: Power Button: Vendor 0 Product 0x1
[    16.895] (--) evdev: Power Button: Found keys
[    16.895] (II) evdev: Power Button: Configuring as keyboard
[    16.895] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input8/event7"
[    16.895] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    16.895] (**) Option "xkb_rules" "evdev"
[    16.895] (**) Option "xkb_model" "pc105"
[    16.895] (**) Option "xkb_layout" "fr"
[    16.895] (**) Option "xkb_variant" "latin9"
[    16.939] (II) config/udev: Adding input device Video Bus (/dev/input/event10)
[    16.939] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    16.939] (II) Using input driver 'evdev' for 'Video Bus'
[    16.939] (**) Video Bus: always reports core events
[    16.939] (**) evdev: Video Bus: Device: "/dev/input/event10"
[    16.939] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    16.939] (--) evdev: Video Bus: Found keys
[    16.939] (II) evdev: Video Bus: Configuring as keyboard
[    16.939] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input11/event10"
[    16.939] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    16.939] (**) Option "xkb_rules" "evdev"
[    16.939] (**) Option "xkb_model" "pc105"
[    16.939] (**) Option "xkb_layout" "fr"
[    16.939] (**) Option "xkb_variant" "latin9"
[    16.940] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[    16.940] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    16.940] (II) Using input driver 'evdev' for 'Video Bus'
[    16.940] (**) Video Bus: always reports core events
[    16.940] (**) evdev: Video Bus: Device: "/dev/input/event9"
[    16.940] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    16.940] (--) evdev: Video Bus: Found keys
[    16.940] (II) evdev: Video Bus: Configuring as keyboard
[    16.940] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:32/LNXVIDEO:00/input/input10/event9"
[    16.940] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[    16.940] (**) Option "xkb_rules" "evdev"
[    16.940] (**) Option "xkb_model" "pc105"
[    16.940] (**) Option "xkb_layout" "fr"
[    16.940] (**) Option "xkb_variant" "latin9"
[    16.941] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[    16.941] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    16.941] (II) Using input driver 'evdev' for 'Power Button'
[    16.941] (**) Power Button: always reports core events
[    16.941] (**) evdev: Power Button: Device: "/dev/input/event4"
[    16.941] (--) evdev: Power Button: Vendor 0 Product 0x1
[    16.941] (--) evdev: Power Button: Found keys
[    16.941] (II) evdev: Power Button: Configuring as keyboard
[    16.941] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5/event4"
[    16.941] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[    16.941] (**) Option "xkb_rules" "evdev"
[    16.941] (**) Option "xkb_model" "pc105"
[    16.941] (**) Option "xkb_layout" "fr"
[    16.941] (**) Option "xkb_variant" "latin9"
[    16.942] (II) config/udev: Adding input device Lid Switch (/dev/input/event6)
[    16.942] (II) No input driver specified, ignoring this device.
[    16.942] (II) This device may have been added with another device file.
[    16.942] (II) config/udev: Adding input device Sleep Button (/dev/input/event5)
[    16.942] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    16.942] (II) Using input driver 'evdev' for 'Sleep Button'
[    16.942] (**) Sleep Button: always reports core events
[    16.942] (**) evdev: Sleep Button: Device: "/dev/input/event5"
[    16.942] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    16.942] (--) evdev: Sleep Button: Found keys
[    16.942] (II) evdev: Sleep Button: Configuring as keyboard
[    16.942] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6/event5"
[    16.942] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[    16.942] (**) Option "xkb_rules" "evdev"
[    16.942] (**) Option "xkb_model" "pc105"
[    16.942] (**) Option "xkb_layout" "fr"
[    16.942] (**) Option "xkb_variant" "latin9"
[    16.943] (II) config/udev: Adding input device Laptop_Integrated_Webcam_2HDM (/dev/input/event17)
[    16.943] (**) Laptop_Integrated_Webcam_2HDM: Applying InputClass "evdev keyboard catchall"
[    16.943] (II) Using input driver 'evdev' for 'Laptop_Integrated_Webcam_2HDM'
[    16.943] (**) Laptop_Integrated_Webcam_2HDM: always reports core events
[    16.943] (**) evdev: Laptop_Integrated_Webcam_2HDM: Device: "/dev/input/event17"
[    16.943] (--) evdev: Laptop_Integrated_Webcam_2HDM: Vendor 0x408 Product 0x2fb1
[    16.943] (--) evdev: Laptop_Integrated_Webcam_2HDM: Found keys
[    16.943] (II) evdev: Laptop_Integrated_Webcam_2HDM: Configuring as keyboard
[    16.944] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.4/3-1.4:1.0/input/input18/event17"
[    16.944] (II) XINPUT: Adding extended input device "Laptop_Integrated_Webcam_2HDM" (type: KEYBOARD, id 11)
[    16.944] (**) Option "xkb_rules" "evdev"
[    16.944] (**) Option "xkb_model" "pc105"
[    16.944] (**) Option "xkb_layout" "fr"
[    16.944] (**) Option "xkb_variant" "latin9"
[    16.944] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event11)
[    16.944] (II) No input driver specified, ignoring this device.
[    16.944] (II) This device may have been added with another device file.
[b][    16.945] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event12)[/b]
[    16.945] (II) No input driver specified, ignoring this device.
[    16.945] (II) This device may have been added with another device file.
[b][    16.945] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event13)[/b]
[    16.945] (II) No input driver specified, ignoring this device.
[    16.945] (II) This device may have been added with another device file.
[b][    16.945] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event14)[/b]
[    16.945] (II) No input driver specified, ignoring this device.
[    16.945] (II) This device may have been added with another device file.
[b][    16.945] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event15)[/b]
[    16.945] (II) No input driver specified, ignoring this device.
[    16.945] (II) This device may have been added with another device file.
[    16.946] (II) config/udev: Adding input device Logitech HID-compliant mouse (/dev/input/event1)
[    16.946] (**) Logitech HID-compliant mouse: Applying InputClass "evdev pointer catchall"
[    16.946] (II) Using input driver 'evdev' for 'Logitech HID-compliant mouse'
[    16.946] (**) Logitech HID-compliant mouse: always reports core events
[    16.946] (**) evdev: Logitech HID-compliant mouse: Device: "/dev/input/event1"
[    16.946] (--) evdev: Logitech HID-compliant mouse: Vendor 0x46d Product 0xc530
[    16.946] (--) evdev: Logitech HID-compliant mouse: Found 20 mouse buttons
[    16.946] (--) evdev: Logitech HID-compliant mouse: Found scroll wheel(s)
[    16.946] (--) evdev: Logitech HID-compliant mouse: Found relative axes
[    16.946] (--) evdev: Logitech HID-compliant mouse: Found x and y relative axes
[    16.946] (II) evdev: Logitech HID-compliant mouse: Configuring as mouse
[    16.946] (II) evdev: Logitech HID-compliant mouse: Adding scrollwheel support
[    16.946] (**) evdev: Logitech HID-compliant mouse: YAxisMapping: buttons 4 and 5
[    16.946] (**) evdev: Logitech HID-compliant mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    16.946] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb1/1-2/1-2:1.0/0003:046D:C530.0001/input/input3/event1"
[    16.946] (II) XINPUT: Adding extended input device "Logitech HID-compliant mouse" (type: MOUSE, id 12)
[    16.946] (II) evdev: Logitech HID-compliant mouse: initialized for relative axes.
[    16.946] (**) Logitech HID-compliant mouse: (accel) keeping acceleration scheme 1
[    16.946] (**) Logitech HID-compliant mouse: (accel) acceleration profile 0
[    16.946] (**) Logitech HID-compliant mouse: (accel) acceleration factor: 2.000
[    16.946] (**) Logitech HID-compliant mouse: (accel) acceleration threshold: 4
[    16.947] (II) config/udev: Adding input device Logitech HID-compliant mouse (/dev/input/mouse0)
[    16.947] (II) No input driver specified, ignoring this device.
[    16.947] (II) This device may have been added with another device file.
[    16.947] (II) config/udev: Adding input device Logitech HID-compliant mouse (/dev/input/event2)/dev/input/event2"
[    16.947] (--) evdev: Logitech HID-compliant
[    16.947] (**) Logitech HID-compliant mouse: Applying InputClass "
evdev keyboard catchall"
[    16.947] (II) Using input driver 'evdev' for 'Logitech HID-compliant mouse'
[    16.947] (**) Logitech HID-compliant mouse: always reports core events
[    16.947] (**) evdev: Logitech HID-compliant mouse: Device: "
mouse: Vendor 0x46d Product 0xc530
[    16.947] (--) evdev: Logitech HID-compliant mouse: Found 1 mouse buttons
[    16.947] (--) evdev: Logitech HID-compliant mouse: Found scroll wheel(s)
[    16.947] (--) evdev: Logitech HID-compliant mouse: Found relative axes
[    16.948] (II) evdev: Logitech HID-compliant mouse: Forcing relative x/y axes to exist.
[    16.948] (--) evdev: Logitech HID-compliant mouse: Found absolute axes
[    16.948] (II) evdev: Logitech HID-compliant mouse: Forcing absolute x/y axes to exist.
[    16.948] (--) evdev: Logitech HID-compliant mouse: Found keys
[    16.948] (II) evdev: Logitech HID-compliant mouse: Configuring as mouse
[    16.948] (II) evdev: Logitech HID-compliant mouse: Configuring as keyboard
[    16.948] (II) evdev: Logitech HID-compliant mouse: Adding scrollwheel support
[    16.948] (**) evdev: Logitech HID-compliant mouse: YAxisMapping: buttons 4 and 5
[    16.948] (**) evdev: Logitech HID-compliant mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    16.948] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb1/1-2/1-2:1.1/0003:046D:C530.0002/input/input4/event2"
[    16.948] (II) XINPUT: Adding extended input device "Logitech HID-compliant mouse" (type: KEYBOARD, id 13)
[    16.948] (**) Option "xkb_rules" "evdev"
[    16.948] (**) Option "xkb_model" "pc105"
[    16.948] (**) Option "xkb_layout" "fr"
[    16.948] (**) Option "xkb_variant" "latin9"
[    16.948] (II) evdev: Logitech HID-compliant mouse: initialized for relative axes.
[    16.948] (WW) evdev: Logitech HID-compliant mouse: ignoring absolute axes.
[    16.948] (**) Logitech HID-compliant mouse: (accel) keeping acceleration scheme 1
[    16.948] (**) Logitech HID-compliant mouse: (accel) acceleration profile 0
[    16.948] (**) Logitech HID-compliant mouse: (accel) acceleration factor: 2.000
[    16.948] (**) Logitech HID-compliant mouse: (accel) acceleration threshold: 4
[    16.949] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    16.949] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    16.949] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    16.949] (**) AT Translated Set 2 keyboard: always reports core events
[    16.949] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[    16.949] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    16.949] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    16.949] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    16.949] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    16.949] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
[    16.949] (**) Option "xkb_rules" "evdev"
[    16.949] (**) Option "xkb_model" "pc105"
[    16.949] (**) Option "xkb_layout" "fr"
[    16.949] (**) Option "xkb_variant" "latin9"
[    16.950] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event3)
[    16.950] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    16.950] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    16.950] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[    16.950] (II) LoadModule: "synaptics"
[    16.950] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    16.959] (II) Module synaptics: vendor="X.Org Foundation"
[    16.959]     compiled for 1.16.0.901, module version = 1.8.99
[    16.959]     Module class: X.Org XInput Driver
[    16.959]     ABI class: X.Org XInput driver, version 21.0
[    16.959] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[    16.959] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    16.959] (**) Option "Device" "/dev/input/event3"
[    16.996] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[    16.996] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5398 (res 42)
[    16.996] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4728 (res 70)
[    16.996] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[    16.996] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[    16.996] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[    16.996] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[    16.996] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    16.996] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    17.060] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input2/event3"
[    17.060] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 15)
[    17.060] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[    17.060] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[    17.060] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.039
[    17.060] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    17.060] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[    17.060] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    17.060] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    17.061] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    17.061] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[    17.061] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[    17.062] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
[    17.062] (II) No input driver specified, ignoring this device.
[    17.062] (II) This device may have been added with another device file.
[    17.063] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event16)
[    17.063] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    17.063] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
[    17.063] (**) Dell WMI hotkeys: always reports core events
[    17.063] (**) evdev: Dell WMI hotkeys: Device: "/dev/input/event16"
[    17.063] (--) evdev: Dell WMI hotkeys: Vendor 0 Product 0
[    17.063] (--) evdev: Dell WMI hotkeys: Found keys
[    17.063] (II) evdev: Dell WMI hotkeys: Configuring as keyboard
[    17.063] (**) Option "config_info" "udev:/sys/devices/virtual/input/input17/event16"
[    17.063] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 16)
[    17.063] (**) Option "xkb_rules" "evdev"
[    17.063] (**) Option "xkb_model" "pc105"
[    17.063] (**) Option "xkb_layout" "fr"
[    17.063] (**) Option "xkb_variant" "latin9"
[b][    35.229] (II) intel(0): EDID vendor "SEC", prod id 21569
[    35.229] (II) intel(0): Printing DDC gathered Modelines:
[    35.229] (II) intel(0): Modeline "1366x768"x0.0   71.56  1366 1414 1446 1510  768 770 775 789 +hsync -vsync (47.4 kHz eP)
[    35.587] (II) intel(0): EDID vendor "SEC", prod id 21569
[    35.588] (II) intel(0): Printing DDC gathered Modelines:
[    35.588] (II) intel(0): Modeline "1366x768"x0.0   71.56  1366 1414 1446 1510  768 770 775 789 +hsync -vsync (47.4 kHz eP)[/b]



robert2a a écrit
voir si le serveur X charge quelque chose a propos de la carte nvidia


Pardon je ne sais pas ce qu'est le serveur "X charge" après recherche j'ai trouvé la commande :

startx


Après avoir exécuté cette commande et passé dans le bureau XFCE, puis petre retourné sur la session HL de base, dans le terminal s'affiche :

X.Org X Server 1.16.4
Release Date: 2014-12-20
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
Current Operating System: Linux handylinux 3.16.0-4-amd64 #1 SMP Debian 3.16.36-1+deb8u2 (2016-10-19) x86_64
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 root=UUID=75c21c03-71d0-4361-a2fc-9cb0d7793aa2 ro quiet
Build Date: 11 February 2015  12:32:02AM
xorg-server 2:1.16.4-1 (http://www.debian.org/support)
Current version of pixman: 0.32.6
  Before reporting problems, check http://wiki.x.org
  to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
  (++) from command line, (!!) notice, (II) informational,
  (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.1.log", Time: Sat Oct 22 13:50:37 2016
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
>                   Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Compat map for group 2 redefined
>                   Using new definition
> Warning:          Compat map for group 3 redefined
>                   Using new definition
> Warning:          Compat map for group 4 redefined
>                   Using new definition
Errors from xkbcomp are not fatal to the X server
xinit: connection to X server lost

waiting for X server to shut down .(EE) Server terminated successfully (0). Closing log file.


robert2a a écrit
donner le contenu du fichier /etc/X11/xorg.conf  (et si il existe )


Je ne voie pas xorg.conf dans le dossier X11
Lorsque je rentre

éditeur /etc/X11/xorg.conf


éditeur: command not found



roberta2 a écrit
pour le test au dessus , brancher un  écran puis l autre , c'est pas un hasard , juste que pour vérifier que chaque écran fonctionne individuellement ainsi que la sortie (vga , dvi ou hdmi ). (ce qui devrait etre le cas puisque avec win10 tout est correct )


Le problème c'est que je peut pas débrancher l'écran de l'ordinateur portable… Et dans le BIOS je n'est rien vue à ce propos. De plus le bios ne s'affiche que sur l'écran du portable.

La commande :

lspci -vnn | egrep -i "vga|3d|display"


00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) (prog-if 00 [VGA controller])
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GF108M [GeForce GT 525M] [10de:0df5] (rev a1) (prog-if 00 [VGA controller])
 


PengouinPdt à écrit
Il faut peut-être envisagé une "défaillance matérielle" - déjà vu, du matos fonctionnant correctement sous Windows, et sous Linux, dysfonctionnant !


Moi qui pensé me passer de W$, ce serait triste de devoir y retourner pour une histoire d'écran, j'espère que ce n'est pas le cas. smile

Dernière modification par Strato (23-10-2016 04:15:24)

Hors ligne

#36 23-10-2016 00:35:02

robert2a
Membre
Lieu : France
Distrib. : Stretch
Noyau : Linux 4.8.0-1-amd64
(G)UI : Mate 1.16.1
Inscription : 15-11-2014

Re : Deuxième écran HDMI non reconnu / bug / carte graphique ?

Bonsoir

tu a un écran tactile ?  => https://www.debian-fr.org/t/ecran-tacti … er/57613/5


[    16.141] (II) intel(0): Output LVDS1 connected
[    16.141] (II) intel(0): Output VGA1 disconnected
[    16.141] (II) intel(0): Output HDMI1 disconnected
[    16.141] (II) intel(0): Output DP1 disconnected
 



ceci me perturbe tongue  =>  Output LVDS1 connected

suis un papy basic moi old_geek.gif  peut etre que le souci vient de la a creuser

sinon pour tes drivers c'est nickel tout est bon , intel et nouveau
reprend ton post avec les bonnes balises , il sera moins long avec l'ascenseur


robert2a a écrit
voir si le serveur X charge quelque chose a propos de la carte nvidia
 


pour ceci tu m'a mal compris , c'est le contenu du Xorg.0.log (que tu a posté ) pas une commande pour lancé le serveur X

tu peut créer un fichier xorg.conf , par exemple pour le driver intel avec les bonnes config d'écran (c'est incompatible avec bumblebee donc faudra l'éffacer quand tu l installe )
par contre aucune connaissance de ce qu il faut faire pour l 'écran du portable
une section screen0 et screen1
ps: un bug de debian ou pas aucune idée mais recherche "debian et tactile"
tu vois que pas d'écran sur HDMI  => "intel(0): Output HDMI1 disconnected"

autre chose tu n'a pas une touche pour basculer de l'écran intégré a l écran externe  (encore une fois pas portable du tout donc je peut dire des bétises wink  )

pour répondre a PengouinPdt
ce n'est pas une question de materiel récent mais en auto , si l'écran n'est pas allumé tu a une résolution basic (pas de configuration dans le xorg.conf de l'écran)
ça ne coute rien de faire les essaies écran allumés et branché
pour le double écran c'est plus vicieux , le deuxieme écran ne s allume pas (si il ne l'est pas avant l allumage du pc ) toujours en mode auto , donc c'est le serveur X qui s'occupe de configurer tout le bazard smile
sur pc de bureau avec le driver non-free de stretch et 2 écrans sans xorg.conf (puisque maintenant il n'est plus obligatoire après le driver 340.xx)

Dernière modification par robert2a (23-10-2016 01:06:26)

Hors ligne

#37 23-10-2016 05:17:57

Strato
Membre
Distrib. : HandyLinux-2.5 = Debian 8.6 (jessie)
Noyau : Linux 3.16.0-4-amd64
(G)UI : XFCE
Inscription : 11-10-2016

Re : Deuxième écran HDMI non reconnu / bug / carte graphique ?

Bonjour,

chalu a écrit :

En voyant ce genre de fil je penserais plutôt nvidia et dans ce cas installer les pilotes propriétaires.


PengouinPdt a écrit :

mais à bien faire au-travers de Bumblebee comme c'est précisé !


Donc il faudrait que j'arrive à faire fonctionner bumblebee avec les pilote propriétaire et voir ce qu'il en retourne si je comprend bien ?

PengouinPdt a écrit :

Et je viens (peut-être) de réaliser pourquoi robert2a conseillait l'installation de mate, sans doute à cause du paquet :
https://packages.debian.org/stretch/mate-optimus Il n'est pas valable pour jessie par contre.


Je me posais justement la question est-ce qu'un environnement de bureau pouvais influer sur la prise en charge matériel. Comme je suis sur schéma multi-boot je me dit que je pourrais tester d'installer Debian mate sur une autre partition, mais étant débutant...

robert2a a écrit :

tu a un écran tactile ? [...] ceci me perturbe tongue  =>  Output LVDS1 connected


Je n'ai pas d'écran tactile, mais cela viens peut-être de l'écran de l'ordinateur, j'ai recherché sur Wikipédia LVDS1 :

Wikipédia a écrit :

Le LVDS est couramment utilisé lorsqu'il est nécessaire d'interconnecter des composants électroniques de provenance différentes avec un débit de données élevé.
    Les dalles d'affichage des ordinateurs portables, type LCD, sont généralement connectées au contrôleur graphique via un agrégat de liens en LVDS.


robert2a a écrit :

tu peut créer un fichier xorg.conf , par exemple pour le driver intel avec les bonnes config d'écran (c'est incompatible avec bumblebee donc faudra l'éffacer quand tu l installe )


un fichier xorg.conf scratchhead.gif je vais regarder de quoi il s'agit, sinon pour le moment ayant réinstallé HL, j'ai la version HL à jours sans rien de plus.

robert2a a écrit :

Autre chose tu n'a pas une touche pour basculer de l'écran intégré a l écran externe  (encore une fois pas portable du tout donc je peut dire des bétises wink

Bien vue ! smile effectivement j'ai cette touche (Fn+F1 ici)... je l'ai jamais utilisé à vrais dire, lorsque j'appuie dessus dans HL la fenêtre "affichage" s'ouvre... smile

Dernière modification par Strato (23-10-2016 05:34:57)

Hors ligne

#38 23-10-2016 08:16:37

chalu
Adhérent(e)
Lieu : Anjou
Distrib. : Debian Jessie (saveur Handylinux 2.5) à jour
Noyau : Linux 3.16.0-4-amd64
(G)UI : XFCE xfwm4
Inscription : 11-03-2016

Re : Deuxième écran HDMI non reconnu / bug / carte graphique ?

Et si tu essayais d'installer les drivers proprietaires Nvidia, pas de bumbleebe pour voir. Il y a aussi un outil de Configuration je crois pour Nvidia, Nvidia-settings ou quelque chose comme ça. Regarde du côté de la doc de Debian facile ou sur le wiki de HL https://handylinux.org/wiki/doku.php/fr/nvidia

Dernière modification par chalu (23-10-2016 22:36:34)


Bien débuter sur Debian :
->Les cahiers du débutant
->Le projet DFlinux (DebianFacileLinux) deux images ISOs (i386 et amd64) basées sur Debian stable et agrémentées d'outils facilitants pour les débutants

Hors ligne

#39 23-10-2016 09:40:46

PengouinPdt
Adhérent(e)
Lieu : 47 - France
Distrib. : Siduction
Noyau : Linux 4.6.2-towo.1-siduction-amd64
(G)UI : XFCE
Inscription : 09-02-2011
Site Web

Re : Deuxième écran HDMI non reconnu / bug / carte graphique ?

@chalu: stp, ne conseille pas cela ... cela ne fonctionnera pas !
S'il ne peut pas désactiver le gpu Intel, c'est le GPU intel qui prendra la main ... et le pilote nvidia ne verra jamais le gpu idoine !
Le pilote nvidia va chercher à prendre la main - il risque même de ne pas avoir d'affichage du tout !

De l'intérêt de projet comme Bumblebee, ou "prime" - celui-ci va dans le "bon sens" puisqu'il est capable d'interroger la carte nvidia sans passer par Intel !

Hors ligne

#40 23-10-2016 12:54:57

robert2a
Membre
Lieu : France
Distrib. : Stretch
Noyau : Linux 4.8.0-1-amd64
(G)UI : Mate 1.16.1
Inscription : 15-11-2014

Re : Deuxième écran HDMI non reconnu / bug / carte graphique ?

Bonjour
donc tu a une touche pour basculer de l'écran du pc a l'écran exterieur  (qui fonctionne )
et tu a 4 connections  possible (pour les écrans ) la sortie de l écran du portable  (LVDS1) plus 3 prises (VGA , HDMI et DP)
pas d'écran tactile

ps: pour la proposition de chalu , quitte a mettre les drivers nvidia , directement faire un test de stretch avec bumbleblee (derniers paquets disponnible , pas mieux sur sid) , cet essaie je pense que tu la pas fait.
sinon pour moi , je comprend toujours pas pourquoi l'écran hdmi n'est pas détecté (sur le log du serveur X on voit bien que sur les 3 prises aucun écran )

ps:c'est quoi la marque et le model de ton portable ?
sur nvidia non-free il y a l utilitaire "nvidia-settings" pour intel je sais pas , qui en autre permet la gestion du multi-écran
tu n'a testé que hdmi , vga et dp tu n'a pas la possibilité (l'écran ne supporte pas ? )

un petit lien sur un exemple de config en dur (sur un pc de bureau)  => https://debian-facile.org/viewtopic.php … 65#p195965
pour un portable c'est pas top de faire une configuration en dur  hmm

Dernière modification par robert2a (23-10-2016 13:20:38)

Hors ligne

#41 23-10-2016 17:25:09

Strato
Membre
Distrib. : HandyLinux-2.5 = Debian 8.6 (jessie)
Noyau : Linux 3.16.0-4-amd64
(G)UI : XFCE
Inscription : 11-10-2016

Re : Deuxième écran HDMI non reconnu / bug / carte graphique ?

@Chalu et @PengouinPdt

PengouinPdt a écrit :

De l'intérêt de projet comme Bumblebee, ou "prime" - celui-ci va dans le "bon sens" puisqu'il est capable d'interroger la carte nvidia sans passer par Intel !


Donc il faudrait que je fasse fonctionner Bumblebee avec le driver propriétaire nvidia ou pas nécessairement ? Ou encore installer Debian-Stretch-Mate comme nous le suggère robert2a.
Au vue de l'état actuel je pense que j'essayerais ces deux solutions.

robert2a a écrit :

donc tu a une touche pour basculer de l'écran du pc a l'écran extérieur  (qui fonctionne )


Oui, enfin cette touche ne fait pas basculer automatiquement d'un écran à l'autre, elle permet d'ouvrir la fenêtre/l'utilitaire/ l'application (je ne sais pas comment l'appeler) qui permet de faire un choix sur la gestion des écrans.

robert2a a écrit :

et tu a 4 connections  possible (pour les écrans ) la sortie de l écran du portable  (LVDS1) plus 3 prises (VGA , HDMI et DP)


En fait je n'ai pas de prise VGA sur l'ordinateur portablehmm, j'ai seulement :
- Connecteur Mini-DisplayPort (DP) - "Connecteur standard d'interface numérique qui permet de brancher des moniteurs et des projecteurs DisplayPort externes"
- Connecteur HDMI - "Permet de connecter une TV pour les signaux audio et vidéo 5.1. REMARQUE :En utilisation avec un moniteur, seul le signal vidéo est lu".
Et LVDS1 qui n'est pas présent dans le manuel mais je pense qu'il s'agit de l'écran intégré.

robert2a a écrit :

pas d'écran tactile


Non, mais il existe en option, option que je n'ai pas.

robert2a a écrit :

sinon pour moi , je comprend toujours pas pourquoi l'écran hdmi n'est pas détecté (sur le log du serveur X on voit bien que sur les 3 prises aucun écran ) »


chalu a écrit :

Est qu'il devrait avoir un retour évoquant HDMI pour la commande lpsci si la sortie HDMI est gérée par la carte intégrée Intel ?
Il n'y en a pas dans son retour message #12. Si ce n'est pas normal, ça pourrait inciter dans ce cas à mettre le noyau des backports ?


Peut-être est-ce une confusion entre HDMI et VGA de la reconnaissance matériel, je dit ça mais n'y connaît rien. Existe-t-il une commande Windows pour voir si j'obtiens le même résultat, j'ai chercher mais rien trouvé à se sujet.

robert2a a écrit :

ps:c'est quoi la marque et le model de ton portable ?


PC portable est un :
DELL XPS 15 L502X, datant de 2011
Processeur : Intel (R) Core (TM) i3-2310M CPU @ 2.10 GHz
Système d’exploitation 64 bits, processeur x64
Système BIOS : DELL-2 datant de 2011
Connecteur possibles : Mini-DisplayPort (DP) et HDMI

Écran IIYAMA:
"Le ProLite E2483HS" LED 24" Full HD, 1920x1080
- équipé de deux haut-parleurs stéréos internes.
- DVI-D
- HDMI
- VGA ( D-sub) (le manuel signal : le câble n'est pas fourni avec le moniteur, vous devez utiliser un câble VGA (D-sub) dédier spécialement à ce modèle).

Je cite le site du fabricant : Tous les moniteurs IIYAMA sont “Plug & Play” (prêt à l’emploi). Dans tous les derniers systèmes d’ exploitation (depuis MICROSOFT Windows 98 rev. 2), il n’est pas nécessaire d’installer un quelconque pilote (« driver »), car les plus importantes informations sont automatiquement échangées entre ordinateur et votre moniteur IIYAMA.

robert2a a écrit :

tu n'a testé que hdmi , vga et dp tu n'a pas la possibilité (l'écran ne supporte pas ? )


Oui, de ce que je voix c'est la seul connexion qui correspond qui puisse relier mon PC à l'écran …  à moins que… ? (puis c'est le seul câble compatible que j'ai sous la mains, si besoin je pourrait essayer de m'en procurer d'autres).

robert2a a écrit :

Sur nvidia non-free il y a l utilitaire "nvidia-settings" pour intel je sais pas , qui en autre permet la gestion du multi-écran


Je peut peut-être/devrais tester l'utilitaire "nvidia-settings" aussi ?

Ps : je vais créé deux nouvelles partitions afin d'y installer HL pour tester Bumblebee et une autre pour essayer d'installer Debian-Stretch-Mate. ça m'évitera d'écraser celle-ci à chaque fois. tongue

Dernière modification par Strato (23-10-2016 17:36:50)

Hors ligne

#42 23-10-2016 20:34:43

PengouinPdt
Adhérent(e)
Lieu : 47 - France
Distrib. : Siduction
Noyau : Linux 4.6.2-towo.1-siduction-amd64
(G)UI : XFCE
Inscription : 09-02-2011
Site Web

Re : Deuxième écran HDMI non reconnu / bug / carte graphique ?

@strato: LVDS est la dénomination de ton écran "portable" ...
Quant à Bumblebee, c'est avec le pilote nvidia, bien-sûr ... oublies l'usage du pilote libre "nouveau".
Et, oui, tu peux tester MATE wink

Hors ligne

#43 23-10-2016 22:40:01

chalu
Adhérent(e)
Lieu : Anjou
Distrib. : Debian Jessie (saveur Handylinux 2.5) à jour
Noyau : Linux 3.16.0-4-amd64
(G)UI : XFCE xfwm4
Inscription : 11-03-2016

Re : Deuxième écran HDMI non reconnu / bug / carte graphique ?

Mate sur jessie est en version 1.8, je doute que ce soit mieux. Par contre sur stretch avec la version 1.16 ça semble plus prometteur.

Bien débuter sur Debian :
->Les cahiers du débutant
->Le projet DFlinux (DebianFacileLinux) deux images ISOs (i386 et amd64) basées sur Debian stable et agrémentées d'outils facilitants pour les débutants

Hors ligne

#44 09-11-2016 13:33:19

Strato
Membre
Distrib. : HandyLinux-2.5 = Debian 8.6 (jessie)
Noyau : Linux 3.16.0-4-amd64
(G)UI : XFCE
Inscription : 11-10-2016

Re : Deuxième écran HDMI non reconnu / bug / carte graphique ?

Bonjour,
Je suis actuellement avec Debian Stretch installer sur un disque dur externe à partir de "/cdimage/unofficial/non-free/cd-including-firmware/stretch_di_alpha7/multi-arch" avec le bureau MATE. Puis mis à jour avec Le Gestionnaire de paquets Synaptic.

cat /etc/issue

Debian GNU/Linux stretch/sid \n \l


env | grep DESK

DESKTOP_SESSION=lightdm-xsession
MATE_DESKTOP_SESSION_ID=this-is-deprecated
XDG_SESSION_DESKTOP=lightdm-xsession
XDG_CURRENT_DESKTOP=MATE
aln@Debian:~$ echo $DESKTOP_SESSION
lightdm-xsession


uname -a

Linux Debian 4.7.0-1-amd64 #1 SMP Debian 4.7.8-1 (2016-10-19) x86_64 GNU/Linux

Le second écran ne fonctionne toujours pas. Lorsque il est banché il se passe bien quelque chose puisque l'écran de l'ordinateur portable "clignote" et le second écran affiche "no signal detected".
Je vous donne les différentes commande qui ont pu m'être demander, pour alléger je pourrais effacer celles inutiles s'il faut.

lscpu

Architecture :        x86_64
Mode(s) opératoire(s) des processeurs : 32-bit, 64-bit
Boutisme :            Little Endian
Processeur(s) :       4
Liste de processeur(s) en ligne : 0-3
Thread(s) par cœur : 2
Cœur(s) par socket : 2
Socket(s) :           1
Nœud(s) NUMA :       1
Identifiant constructeur : GenuineIntel
Famille de processeur : 6
Modèle :             42
Nom de modèle :      Intel(R) Core(TM) i3-2310M CPU @ 2.10GHz
Révision :           7
Vitesse du processeur en MHz : 799.932
Vitesse maximale du processeur en MHz : 2100,0000
Vitesse minimale du processeur en MHz : 800,0000
BogoMIPS :            4190.42
Virtualisation :      VT-x
Cache L1d :           32K
Cache L1i :           32K
Cache L2 :            256K
Cache L3 :            3072K
Nœud NUMA 0 de processeur(s) : 0-3
Flags:                 fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts nopl xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer xsave avx lahf_lm epb tpr_shadow vnmi flexpriority ept vpid xsaveopt dtherm arat pln pts

xrandr


Screen 0: minimum 320 x 200, current 1366 x 768, maximum 8192 x 8192
LVDS-1 connected 1366x768+0+0 (normal left inverted right x axis y axis) 344mm x 194mm
   1366x768      60.06*+
   1360x768      59.80    59.96  
   1024x768      60.04    60.00  
   960x720       60.00  
   928x696       60.05  
   896x672       60.01  
   960x600       60.00  
   960x540       59.99  
   800x600       60.00    60.32    56.25  
   840x525       60.01    59.88  
   800x512       60.17  
   700x525       59.98  
   640x512       60.02  
   720x450       59.89  
   640x480       60.00    59.94  
   680x384       59.80    59.96  
   576x432       60.06  
   512x384       60.00  
   400x300       60.32    56.34  
   320x240       60.05  
VGA-1 disconnected (normal left inverted right x axis y axis)
HDMI-1 disconnected (normal left inverted right x axis y axis)
DP-1 disconnected (normal left inverted right x axis y axis)



Robert2a a écrit :

Ce que je pense depuis le début aussi , une installation propre de jessie avec un bureau mate pour commencer
regarder ce que dit le /var/log/Xorg.0.log , que le driver intel soit bien installé. (voir si le serveur X charge quelque chose a propos de la carte nvidia )
donner le contenu du fichier /etc/X11/xorg.conf  (et si il existe )

Le fichier /etc/X11/xorg.conf n'existe pas. Le fichier /var/log/Xorg.0/log donne :

[    24.719]
X.Org X Server 1.18.4
Release Date: 2016-07-19
[    24.719] X Protocol Version 11, Revision 0
[    24.719] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[    24.719] Current Operating System: Linux Debian 4.7.0-1-amd64 #1 SMP Debian 4.7.8-1 (2016-10-19) x86_64
[    24.719] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.7.0-1-amd64 root=UUID=c9c5a086-1363-43da-8139-639f1a604522 ro quiet
[    24.719] Build Date: 06 September 2016  01:32:44PM
[    24.719] xorg-server 2:1.18.4-2 (https://www.debian.org/support)
[    24.719] Current version of pixman: 0.34.0
[    24.719]  Before reporting problems, check http://wiki.x.org
  to make sure that you have the latest version.
[    24.719] Markers: (--) probed, (**) from config file, (==) default setting,
  (++) from command line, (!!) notice, (II) informational,
  (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    24.719] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Nov  9 10:41:06 2016
[    24.747] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    24.781] (==) No Layout section.  Using the first Screen section.
[    24.781] (==) No screen section available. Using defaults.
[    24.781] (**) |-->Screen "Default Screen Section" (0)
[    24.781] (**) |   |-->Monitor "<default monitor>"
[    24.784] (==) No monitor specified for screen "Default Screen Section".
  Using a default monitor configuration.
[    24.784] (==) Automatically adding devices
[    24.784] (==) Automatically enabling devices
[    24.784] (==) Automatically adding GPU devices
[    24.784] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    24.847] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    24.847]  Entry deleted from font path.
[    24.873] (==) FontPath set to:
  /usr/share/fonts/X11/misc,
  /usr/share/fonts/X11/100dpi/:unscaled,
  /usr/share/fonts/X11/75dpi/:unscaled,
  /usr/share/fonts/X11/Type1,
  /usr/share/fonts/X11/100dpi,
  /usr/share/fonts/X11/75dpi,
  built-ins
[    24.873] (==) ModulePath set to "/usr/lib/xorg/modules"
[    24.873] (II) The server relies on udev to provide the list of input devices.
  If no devices become available, reconfigure udev or disable AutoAddDevices.
[    24.875] (II) Loader magic: 0x5584559d9dc0
[    24.875] (II) Module ABI versions:
[    24.875]  X.Org ANSI C Emulation: 0.4
[    24.875]  X.Org Video Driver: 20.0
[    24.875]  X.Org XInput driver : 22.1
[    24.875]  X.Org Server Extension : 9.0
[    24.876] (++) using VT number 7

[    24.876] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    24.877] (II) xfree86: Adding drm device (/dev/dri/card1)
[    25.556] (II) xfree86: Adding drm device (/dev/dri/card0)
[    25.559] (--) PCI:*(0:0:2:0) 8086:0116:1028:04b6 rev 9, Mem @ 0xf1400000/4194304, 0xe0000000/268435456, I/O @ 0x00004000/64, BIOS @ 0x????????/131072
[    25.559] (--) PCI: (0:1:0:0) 10de:0df5:1028:04b6 rev 161, Mem @ 0xf0000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00003000/128, BIOS @ 0x????????/524288
[    25.560] (II) LoadModule: "glx"
[    25.595] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    25.802] (II) Module glx: vendor="X.Org Foundation"
[    25.802]  compiled for 1.18.4, module version = 1.0.0
[    25.802]  ABI class: X.Org Server Extension, version 9.0
[    25.802] (==) AIGLX enabled
[    25.802] (==) Matched nouveau as autoconfigured driver 0
[    25.802] (==) Matched nv as autoconfigured driver 1
[    25.802] (==) Matched modesetting as autoconfigured driver 2
[    25.802] (==) Matched fbdev as autoconfigured driver 3
[    25.803] (==) Matched vesa as autoconfigured driver 4
[    25.803] (==) Assigned the driver to the xf86ConfigLayout
[    25.803] (II) LoadModule: "nouveau"
[    25.827] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[    25.879] (II) Module nouveau: vendor="X.Org Foundation"
[    25.879]  compiled for 1.18.4, module version = 1.0.13
[    25.879]  Module class: X.Org Video Driver
[    25.879]  ABI class: X.Org Video Driver, version 20.0
[    25.879] (II) LoadModule: "nv"
[    25.879] (WW) Warning, couldn't open module nv
[    25.879] (II) UnloadModule: "nv"
[    25.879] (II) Unloading nv
[    25.879] (EE) Failed to load module "nv" (module does not exist, 0)
[    25.879] (II) LoadModule: "modesetting"
[    25.879] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    25.882] (II) Module modesetting: vendor="X.Org Foundation"
[    25.882]  compiled for 1.18.4, module version = 1.18.4
[    25.882]  Module class: X.Org Video Driver
[    25.882]  ABI class: X.Org Video Driver, version 20.0
[    25.882] (II) LoadModule: "fbdev"
[    25.883] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    25.889] (II) Module fbdev: vendor="X.Org Foundation"
[    25.889]  compiled for 1.18.0, module version = 0.4.4
[    25.889]  Module class: X.Org Video Driver
[    25.889]  ABI class: X.Org Video Driver, version 20.0
[    25.889] (II) LoadModule: "vesa"
[    25.889] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    25.897] (II) Module vesa: vendor="X.Org Foundation"
[    25.897]  compiled for 1.18.0, module version = 2.3.4
[    25.897]  Module class: X.Org Video Driver
[    25.897]  ABI class: X.Org Video Driver, version 20.0
[    25.897] (II) NOUVEAU driver Date:   Tue Sep 20 00:31:06 2016 -0400
[    25.897] (II) NOUVEAU driver for NVIDIA chipset families :
[    25.897]  RIVA TNT        (NV04)
[    25.897]  RIVA TNT2       (NV05)
[    25.897]  GeForce 256     (NV10)
[    25.897]  GeForce 2       (NV11, NV15)
[    25.897]  GeForce 4MX     (NV17, NV18)
[    25.897]  GeForce 3       (NV20)
[    25.897]  GeForce 4Ti     (NV25, NV28)
[    25.897]  GeForce FX      (NV3x)
[    25.898]  GeForce 6       (NV4x)
[    25.898]  GeForce 7       (G7x)
[    25.898]  GeForce 8       (G8x)
[    25.898]  GeForce GTX 200 (NVA0)
[    25.898]  GeForce GTX 400 (NVC0)
[    25.898] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    25.898] (II) FBDEV: driver for framebuffer: fbdev
[    25.898] (II) VESA: driver for VESA chipsets: vesa
[    25.905] (II) [drm] nouveau interface version: 1.3.1
[    25.905] (II) modeset(0): using drv /dev/dri/card0
[    25.905] (WW) Falling back to old probe method for fbdev
[    25.905] (II) Loading sub module "fbdevhw"
[    25.905] (II) LoadModule: "fbdevhw"
[    25.905] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    25.948] (II) Module fbdevhw: vendor="X.Org Foundation"
[    25.948]  compiled for 1.18.4, module version = 0.0.2
[    25.948]  ABI class: X.Org Video Driver, version 20.0
[    25.948] (WW) Falling back to old probe method for vesa
[    25.948] (II) modeset(0): Creating default Display subsection in Screen section
  "Default Screen Section" for depth/fbbpp 24/32
[    25.948] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[    25.948] (==) modeset(0): RGB weight 888
[    25.948] (==) modeset(0): Default visual is TrueColor
[    25.949] (II) Loading sub module "glamoregl"
[    25.949] (II) LoadModule: "glamoregl"
[    25.949] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[    26.049] (II) Module glamoregl: vendor="X.Org Foundation"
[    26.049]  compiled for 1.18.4, module version = 1.0.0
[    26.049]  ABI class: X.Org ANSI C Emulation, version 0.4
[    26.049] (II) glamor: OpenGL accelerated X.org driver based.
[    26.445] (II) glamor: EGL version 1.4 (DRI2):
[    26.619] (II) modeset(0): glamor initialized
[    26.619] (II) modeset(0): Output LVDS-1 has no monitor section
[    26.736] (II) modeset(0): Output VGA-1 has no monitor section
[    26.865] (II) modeset(0): Output HDMI-1 has no monitor section
[    26.865] (II) modeset(0): Output DP-1 has no monitor section
[    26.865] (II) modeset(0): EDID for output LVDS-1
[    26.865] (II) modeset(0): Manufacturer: SEC  Model: 5441  Serial#: 0
[    26.865] (II) modeset(0): Year: 2010  Week: 0
[    26.865] (II) modeset(0): EDID Version: 1.3
[    26.865] (II) modeset(0): Digital Display Input
[    26.865] (II) modeset(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[    26.865] (II) modeset(0): Gamma: 2.20
[    26.865] (II) modeset(0): No DPMS capabilities specified
[    26.865] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[    26.866] (II) modeset(0): First detailed timing is preferred mode
[    26.866] (II) modeset(0): redX: 0.620 redY: 0.340   greenX: 0.330 greenY: 0.570
[    26.866] (II) modeset(0): blueX: 0.150 blueY: 0.060   whiteX: 0.313 whiteY: 0.329
[    26.866] (II) modeset(0): Manufacturer's mask: 0
[    26.866] (II) modeset(0): Supported detailed timing:
[    26.866] (II) modeset(0): clock: 71.6 MHz   Image Size:  344 x 194 mm
[    26.866] (II) modeset(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1510 h_border: 0
[    26.866] (II) modeset(0): v_active: 768  v_sync: 770  v_sync_end 775 v_blanking: 789 v_border: 0
[    26.866] (II) modeset(0): Supported detailed timing:
[    26.866] (II) modeset(0): clock: 71.6 MHz   Image Size:  344 x 194 mm
[    26.866] (II) modeset(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1510 h_border: 0
[    26.866] (II) modeset(0): v_active: 768  v_sync: 770  v_sync_end 775 v_blanking: 789 v_border: 0
[    26.866] (II) modeset(0):  8MN61156AT
[    26.866] (II) modeset(0): Unknown vendor-specific block 0
[    26.866] (II) modeset(0): EDID (in hex):
[    26.866] (II) modeset(0):   00ffffffffffff004ca3415400000000
[    26.866] (II) modeset(0):   00140103902213780ac8959e57549226
[    26.866] (II) modeset(0):   0f505400000001010101010101010101
[    26.866] (II) modeset(0):   010101010101f41b5690500015303020
[    26.866] (II) modeset(0):   250058c21000001af41b569050001530
[    26.866] (II) modeset(0):   3020250058c21000001a000000fe0038
[    26.866] (II) modeset(0):   4d4e36318031353641540a2000000000
[    26.866] (II) modeset(0):   00000000000000000001010a2020001d
[    26.866] (II) modeset(0): Printing probed modes for output LVDS-1
[    26.866] (II) modeset(0): Modeline "1366x768"x60.1   71.56  1366 1414 1446 1510  768 770 775 789 +hsync -vsync (47.4 kHz eP)
[    26.866] (II) modeset(0): Modeline "1360x768"x59.8   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsync (47.7 kHz d)
[    26.867] (II) modeset(0): Modeline "1360x768"x60.0   72.00  1360 1408 1440 1520  768 771 781 790 +hsync -vsync (47.4 kHz d)
[    26.867] (II) modeset(0): Modeline "1024x768"x120.1  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[    26.867] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[    26.867] (II) modeset(0): Modeline "960x720"x120.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[    26.867] (II) modeset(0): Modeline "928x696"x120.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[    26.867] (II) modeset(0): Modeline "896x672"x120.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[    26.867] (II) modeset(0): Modeline "960x600"x120.0   77.00  960 984 1000 1040  600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[    26.867] (II) modeset(0): Modeline "960x540"x120.0   69.25  960 984 1000 1040  540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[    26.867] (II) modeset(0): Modeline "800x600"x120.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[    26.867] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    26.867] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    26.867] (II) modeset(0): Modeline "840x525"x120.0   73.12  840 892 980 1120  525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[    26.867] (II) modeset(0): Modeline "840x525"x119.8   59.50  840 864 880 920  525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[    26.867] (II) modeset(0): Modeline "800x512"x120.3   51.56  800 800 828 832  512 512 514 515 doublescan +hsync +vsync (62.0 kHz d)
[    26.867] (II) modeset(0): Modeline "700x525"x120.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[    26.867] (II) modeset(0): Modeline "640x512"x120.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[    26.867] (II) modeset(0): Modeline "720x450"x119.8   53.25  720 760 836 952  450 451 454 467 doublescan -hsync +vsync (55.9 kHz d)
[    26.867] (II) modeset(0): Modeline "640x480"x120.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[    26.867] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[    26.867] (II) modeset(0): Modeline "680x384"x119.6   42.38  680 716 784 888  384 385 390 399 doublescan -hsync +vsync (47.7 kHz d)
[    26.867] (II) modeset(0): Modeline "680x384"x119.9   36.00  680 704 720 760  384 385 390 395 doublescan +hsync -vsync (47.4 kHz d)
[    26.867] (II) modeset(0): Modeline "576x432"x120.1   40.81  576 608 668 760  432 432 434 447 doublescan -hsync +vsync (53.7 kHz d)
[    26.867] (II) modeset(0): Modeline "512x384"x120.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[    26.867] (II) modeset(0): Modeline "400x300"x120.6   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[    26.867] (II) modeset(0): Modeline "400x300"x112.7   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[    26.867] (II) modeset(0): Modeline "320x240"x120.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[    26.984] (II) modeset(0): EDID for output VGA-1
[    27.113] (II) modeset(0): EDID for output HDMI-1
[    27.113] (II) modeset(0): EDID for output DP-1
[    27.113] (II) modeset(0): Output LVDS-1 connected
[    27.113] (II) modeset(0): Output VGA-1 disconnected
[    27.113] (II) modeset(0): Output HDMI-1 disconnected
[    27.113] (II) modeset(0): Output DP-1 disconnected
[    27.113] (II) modeset(0): Using exact sizes for initial modes
[    27.113] (II) modeset(0): Output LVDS-1 using initial mode 1366x768 +0+0
[    27.113] (II) modeset(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    27.113] (==) modeset(0): DPI set to (96, 96)
[    27.113] (II) Loading sub module "fb"
[    27.113] (II) LoadModule: "fb"
[    27.113] (II) Loading /usr/lib/xorg/modules/libfb.so
[    27.125] (II) Module fb: vendor="X.Org Foundation"
[    27.125]  compiled for 1.18.4, module version = 1.0.0
[    27.125]  ABI class: X.Org ANSI C Emulation, version 0.4
[    27.125] (II) Loading sub module "dri2"
[    27.125] (II) LoadModule: "dri2"
[    27.125] (II) Module "dri2" already built-in
[    27.125] (--) NOUVEAU(G0): Chipset: "NVIDIA NVC1"
[    27.125] (==) NOUVEAU(G0): Depth 24, (--) framebuffer bpp 32
[    27.125] (==) NOUVEAU(G0): RGB weight 888
[    27.125] (==) NOUVEAU(G0): Default visual is TrueColor
[    27.125] (==) NOUVEAU(G0): Using HW cursor
[    27.125] (==) NOUVEAU(G0): Allowed maximum DRI level 2.
[    27.125] (==) NOUVEAU(G0): GLX sync to VBlank enabled.
[    27.125] (==) NOUVEAU(G0): Page flipping enabled
[    27.125] (==) NOUVEAU(G0): Swap limit set to 1 [Max allowed 2]
[    27.125] (==) NOUVEAU(G0): Page flipping synced to vblank by kernel.
[    27.125] (II) NOUVEAU(G0): Initializing outputs ...
[    27.136] (II) NOUVEAU(G0): Output VGA-1-2 has no monitor section
[    27.137] (II) NOUVEAU(G0): Output HDMI-1-2 has no monitor section
[    27.137] (II) NOUVEAU(G0): 2 crtcs needed for screen.
[    27.141] (II) NOUVEAU(G0): Allocated crtc nr. 0 to this screen.
[    27.141] (II) NOUVEAU(G0): Allocated crtc nr. 1 to this screen.
[    27.152] (II) NOUVEAU(G0): EDID for output VGA-1-2
[    27.152] (II) NOUVEAU(G0): Printing probed modes for output VGA-1-2
[    27.152] (II) NOUVEAU(G0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    27.152] (II) NOUVEAU(G0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    27.152] (II) NOUVEAU(G0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    27.152] (II) NOUVEAU(G0): Modeline "848x480"x60.0   33.75  848 864 976 1088  480 486 494 517 +hsync +vsync (31.0 kHz e)
[    27.152] (II) NOUVEAU(G0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    27.153] (II) NOUVEAU(G0): EDID for output HDMI-1-2
[    27.153] (II) NOUVEAU(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    27.153] (--) NOUVEAU(G0): Virtual size is 1024x768 (pitch 0)
[    27.153] (**) NOUVEAU(G0):  Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[    27.153] (II) NOUVEAU(G0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    27.153] (**) NOUVEAU(G0):  Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[    27.153] (II) NOUVEAU(G0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    27.153] (**) NOUVEAU(G0):  Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[    27.153] (II) NOUVEAU(G0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    27.153] (**) NOUVEAU(G0):  Driver mode "848x480": 33.8 MHz (scaled from 0.0 MHz), 31.0 kHz, 60.0 Hz
[    27.153] (II) NOUVEAU(G0): Modeline "848x480"x60.0   33.75  848 864 976 1088  480 486 494 517 +hsync +vsync (31.0 kHz e)
[    27.153] (**) NOUVEAU(G0):  Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 59.9 Hz
[    27.153] (II) NOUVEAU(G0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    27.153] (==) NOUVEAU(G0): DPI set to (96, 96)
[    27.153] (II) Loading sub module "fb"
[    27.153] (II) LoadModule: "fb"
[    27.153] (II) Loading /usr/lib/xorg/modules/libfb.so
[    27.153] (II) Module fb: vendor="X.Org Foundation"
[    27.153]  compiled for 1.18.4, module version = 1.0.0
[    27.153]  ABI class: X.Org ANSI C Emulation, version 0.4
[    27.153] (II) Loading sub module "shadowfb"
[    27.153] (II) LoadModule: "shadowfb"
[    27.154] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[    27.171] (II) Module shadowfb: vendor="X.Org Foundation"
[    27.171]  compiled for 1.18.4, module version = 1.0.0
[    27.171]  ABI class: X.Org ANSI C Emulation, version 0.4
[    27.171] (II) UnloadModule: "fbdev"
[    27.172] (II) Unloading fbdev
[    27.172] (II) UnloadSubModule: "fbdevhw"
[    27.172] (II) Unloading fbdevhw
[    27.172] (II) UnloadModule: "vesa"
[    27.172] (II) Unloading vesa
[    27.172] (==) Depth 24 pixmap format is 32 bpp
[    27.200] (II) NOUVEAU(G0): Channel setup complete.
[    27.225] (II) NOUVEAU(G0): [COPY] async initialised.
[    27.261] (II) NOUVEAU(G0): Hardware support for Present enabled
[    27.261] (II) NOUVEAU(G0): [DRI2] Setup complete
[    27.261] (II) NOUVEAU(G0): [DRI2]   DRI driver: nouveau
[    27.261] (II) NOUVEAU(G0): [DRI2]   VDPAU driver: nouveau
[    27.261] (II) Loading sub module "exa"
[    27.261] (II) LoadModule: "exa"
[    27.262] (II) Loading /usr/lib/xorg/modules/libexa.so
[    27.272] (II) Module exa: vendor="X.Org Foundation"
[    27.272]  compiled for 1.18.4, module version = 2.6.0
[    27.272]  ABI class: X.Org Video Driver, version 20.0
[    27.273] (II) EXA(256): Driver allocated offscreen pixmaps
[    27.273] (II) EXA(256): Driver registered support for the following operations:
[    27.273] (II)         Solid
[    27.273] (II)         Copy
[    27.273] (II)         Composite (RENDER acceleration)
[    27.273] (II)         UploadToScreen
[    27.273] (II)         DownloadFromScreen
[    27.273] (==) NOUVEAU(G0): Backing store enabled
[    27.273] (==) NOUVEAU(G0): Silken mouse enabled
[    27.273] (II) NOUVEAU(G0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[    27.273] (II) NOUVEAU(G0): [XvMC] Extension initialized.
[    27.273] (==) NOUVEAU(G0): DPMS enabled
[    27.273] (II) NOUVEAU(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    27.482] (==) modeset(0): Backing store enabled
[    27.482] (==) modeset(0): Silken mouse enabled
[    27.482] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    27.482] (==) modeset(0): DPMS enabled
[    27.482] (II) modeset(0): [DRI2] Setup complete
[    27.482] (II) modeset(0): [DRI2]   DRI driver: i965
[    27.482] (II) modeset(0): [DRI2]   VDPAU driver: i965
[    27.488] (--) RandR disabled
[    27.504] (II) SELinux: Disabled on system
[    27.524] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    27.524] (II) AIGLX: enabled GLX_ARB_create_context
[    27.524] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    27.524] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[    27.524] (II) AIGLX: enabled GLX_INTEL_swap_event
[    27.524] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    27.524] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[    27.524] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[    27.524] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[    27.524] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    27.524] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[    27.524] (II) AIGLX: Loaded and initialized i965
[    27.524] (II) GLX: Initialized DRI2 GL provider for screen 0
[    27.526] (II) NOUVEAU(G0): NVEnterVT is called.
[    27.541] (II) modeset(0): Damage tracking initialized
[    27.541] (II) modeset(0): Setting screen physical size to 361 x 203
[    28.491] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[    28.491] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    28.491] (II) LoadModule: "libinput"
[    28.491] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    28.639] (II) Module libinput: vendor="X.Org Foundation"
[    28.639]  compiled for 1.18.4, module version = 0.20.0
[    28.639]  Module class: X.Org XInput Driver
[    28.639]  ABI class: X.Org XInput driver, version 22.1
[    28.639] (II) Using input driver 'libinput' for 'Power Button'
[    28.639] (**) Power Button: always reports core events
[    28.639] (**) Option "Device" "/dev/input/event5"
[    28.639] (**) Option "_source" "server/udev"
[    28.640] (II) input device 'Power Button', /dev/input/event5 is tagged by udev as: Keyboard
[    28.640] (II) input device 'Power Button', /dev/input/event5 is a keyboard
[    28.656] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event5"
[    28.656] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    28.656] (**) Option "xkb_model" "pc105"
[    28.656] (**) Option "xkb_layout" "fr"
[    28.656] (**) Option "xkb_variant" "latin9"
[    28.732] (II) input device 'Power Button', /dev/input/event5 is tagged by udev as: Keyboard
[    28.732] (II) input device 'Power Button', /dev/input/event5 is a keyboard
[    28.733] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[    28.733] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    28.733] (II) Using input driver 'libinput' for 'Video Bus'
[    28.733] (**) Video Bus: always reports core events
[    28.733] (**) Option "Device" "/dev/input/event8"
[    28.733] (**) Option "_source" "server/udev"
[    28.733] (II) input device 'Video Bus', /dev/input/event8 is tagged by udev as: Keyboard
[    28.733] (II) input device 'Video Bus', /dev/input/event8 is a keyboard
[    28.744] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input9/event8"
[    28.744] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    28.744] (**) Option "xkb_model" "pc105"
[    28.744] (**) Option "xkb_layout" "fr"
[    28.744] (**) Option "xkb_variant" "latin9"
[    28.745] (II) input device 'Video Bus', /dev/input/event8 is tagged by udev as: Keyboard
[    28.745] (II) input device 'Video Bus', /dev/input/event8 is a keyboard
[    28.745] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[    28.745] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    28.745] (II) Using input driver 'libinput' for 'Video Bus'
[    28.746] (**) Video Bus: always reports core events
[    28.746] (**) Option "Device" "/dev/input/event7"
[    28.746] (**) Option "_source" "server/udev"
[    28.746] (II) input device 'Video Bus', /dev/input/event7 is tagged by udev as: Keyboard
[    28.746] (II) input device 'Video Bus', /dev/input/event7 is a keyboard
[    28.756] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:32/LNXVIDEO:00/input/input8/event7"
[    28.756] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[    28.756] (**) Option "xkb_model" "pc105"
[    28.756] (**) Option "xkb_layout" "fr"
[    28.756] (**) Option "xkb_variant" "latin9"
[    28.757] (II) input device 'Video Bus', /dev/input/event7 is tagged by udev as: Keyboard
[    28.757] (II) input device 'Video Bus', /dev/input/event7 is a keyboard
[    28.757] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    28.757] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    28.757] (II) Using input driver 'libinput' for 'Power Button'
[    28.757] (**) Power Button: always reports core events
[    28.757] (**) Option "Device" "/dev/input/event2"
[    28.757] (**) Option "_source" "server/udev"
[    28.758] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
[    28.758] (II) input device 'Power Button', /dev/input/event2 is a keyboard
[    28.772] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event2"
[    28.772] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[    28.772] (**) Option "xkb_model" "pc105"
[    28.772] (**) Option "xkb_layout" "fr"
[    28.772] (**) Option "xkb_variant" "latin9"
[    28.773] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
[    28.773] (II) input device 'Power Button', /dev/input/event2 is a keyboard
[    28.773] (II) config/udev: Adding input device Lid Switch (/dev/input/event4)
[    28.773] (II) No input driver specified, ignoring this device.
[    28.773] (II) This device may have been added with another device file.
[    28.774] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[    28.774] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[    28.774] (II) Using input driver 'libinput' for 'Sleep Button'
[    28.774] (**) Sleep Button: always reports core events
[    28.774] (**) Option "Device" "/dev/input/event3"
[    28.774] (**) Option "_source" "server/udev"
[    28.774] (II) input device 'Sleep Button', /dev/input/event3 is tagged by udev as: Keyboard
[    28.774] (II) input device 'Sleep Button', /dev/input/event3 is a keyboard
[    28.784] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4/event3"
[    28.784] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[    28.784] (**) Option "xkb_model" "pc105"
[    28.784] (**) Option "xkb_layout" "fr"
[    28.784] (**) Option "xkb_variant" "latin9"
[    28.785] (II) input device 'Sleep Button', /dev/input/event3 is tagged by udev as: Keyboard
[    28.785] (II) input device 'Sleep Button', /dev/input/event3 is a keyboard
[    28.786] (II) config/udev: Adding input device Laptop_Integrated_Webcam_2HDM (/dev/input/event14)
[    28.786] (**) Laptop_Integrated_Webcam_2HDM: Applying InputClass "libinput keyboard catchall"
[    28.786] (II) Using input driver 'libinput' for 'Laptop_Integrated_Webcam_2HDM'
[    28.786] (**) Laptop_Integrated_Webcam_2HDM: always reports core events
[    28.786] (**) Option "Device" "/dev/input/event14"
[    28.786] (**) Option "_source" "server/udev"
[    28.787] (II) input device 'Laptop_Integrated_Webcam_2HDM', /dev/input/event14 is tagged by udev as: Keyboard
[    28.787] (II) input device 'Laptop_Integrated_Webcam_2HDM', /dev/input/event14 is a keyboard
[    28.816] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input15/event14"
[    28.816] (II) XINPUT: Adding extended input device "Laptop_Integrated_Webcam_2HDM" (type: KEYBOARD, id 11)
[    28.816] (**) Option "xkb_model" "pc105"
[    28.816] (**) Option "xkb_layout" "fr"
[    28.816] (**) Option "xkb_variant" "latin9"
[    28.817] (II) input device 'Laptop_Integrated_Webcam_2HDM', /dev/input/event14 is tagged by udev as: Keyboard
[    28.817] (II) input device 'Laptop_Integrated_Webcam_2HDM', /dev/input/event14 is a keyboard
[    28.818] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9)
[    28.818] (II) No input driver specified, ignoring this device.
[    28.818] (II) This device may have been added with another device file.
[    28.819] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event10)
[    28.819] (II) No input driver specified, ignoring this device.
[    28.819] (II) This device may have been added with another device file.
[    28.819] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event11)
[    28.819] (II) No input driver specified, ignoring this device.
[    28.819] (II) This device may have been added with another device file.
[    28.820] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event12)
[    28.820] (II) No input driver specified, ignoring this device.
[    28.820] (II) This device may have been added with another device file.
[    28.820] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event13)
[    28.820] (II) No input driver specified, ignoring this device.
[    28.820] (II) This device may have been added with another device file.
[    28.821] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    28.821] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[    28.821] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[    28.821] (**) AT Translated Set 2 keyboard: always reports core events
[    28.821] (**) Option "Device" "/dev/input/event0"
[    28.821] (**) Option "_source" "server/udev"
[    28.822] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[    28.822] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[    28.852] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    28.852] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[    28.852] (**) Option "xkb_model" "pc105"
[    28.852] (**) Option "xkb_layout" "fr"
[    28.852] (**) Option "xkb_variant" "latin9"
[    28.853] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[    28.853] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[    28.854] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event1)
[    28.854] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[    28.854] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad'
[    28.854] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    28.854] (**) Option "Device" "/dev/input/event1"
[    28.854] (**) Option "_source" "server/udev"
[    28.855] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event1 is tagged by udev as: Touchpad
[    28.855] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event1 is a touchpad
[    28.880] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input2/event1"
[    28.880] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[    28.880] (**) Option "AccelerationScheme" "none"
[    28.881] (**) SynPS/2 Synaptics TouchPad: (accel) selected scheme none/0
[    28.881] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    28.881] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    28.881] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event1 is tagged by udev as: Touchpad
[    28.881] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event1 is a touchpad
[    28.882] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[    28.882] (II) No input driver specified, ignoring this device.
[    28.882] (II) This device may have been added with another device file.
[    28.882] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[    28.883] (II) No input driver specified, ignoring this device.
[    28.883] (II) This device may have been added with another device file.
[    54.827] (II) modeset(0): EDID vendor "SEC", prod id 21569
[    54.828] (II) modeset(0): Printing DDC gathered Modelines:
[    54.828] (II) modeset(0): Modeline "1366x768"x0.0   71.56  1366 1414 1446 1510  768 770 775 789 +hsync -vsync (47.4 kHz eP)
[    55.081] (II) modeset(0): EDID vendor "SEC", prod id 21569
[    55.081] (II) modeset(0): Printing DDC gathered Modelines:
[    55.081] (II) modeset(0): Modeline "1366x768"x0.0   71.56  1366 1414 1446 1510  768 770 775 789 +hsync -vsync (47.4 kHz eP)
[    55.352] (II) modeset(0): EDID vendor "SEC", prod id 21569
[    55.352] (II) modeset(0): Printing DDC gathered Modelines:
[    55.352] (II) modeset(0): Modeline "1366x768"x0.0   71.56  1366 1414 1446 1510  768 770 775 789 +hsync -vsync (47.4 kHz eP)
[    55.608] (II) modeset(0): EDID vendor "SEC", prod id 21569
[    55.608] (II) modeset(0): Printing DDC gathered Modelines:
[    55.608] (II) modeset(0): Modeline "1366x768"x0.0   71.56  1366 1414 1446 1510  768 770 775 789 +hsync -vsync (47.4 kHz eP)
[    57.917] (II) modeset(0): EDID vendor "SEC", prod id 21569
[    57.917] (II) modeset(0): Printing DDC gathered Modelines:
[    57.917] (II) modeset(0): Modeline "1366x768"x0.0   71.56  1366 1414 1446 1510  768 770 775 789 +hsync -vsync (47.4 kHz eP)
[   102.548] (II) Axis 0x1 value 1230 is outside expected range [1242, 4894]
See https://wayland.freedesktop.org/libinput/doc/1.5.0//absolute_coordinate_ranges.html for details



chalu a écrit :

En voyant ce genre de fil https://bbs.archlinux.org/viewtopic.php?id=204800 je penserais plutôt nvidia et dans ce cas installer les pilotes propriétaires.

PengouinPdt a écrit :

En effet, intéressant ... mais à bien faire au-travers de Bumblebee comme c'est précisé !

chalu a écrit :

Et je viens (peut-être) de réaliser pourquoi robert2a conseillait l'installation de mate, sans doute à cause du paquet : https://packages.debian.org/stretch/mate-optimus

Robert2a  a écrit :

faire un test de stretch avec bumbleblee (derniers paquets disponnible , pas mieux sur sid) , cet essaie je pense que tu la pas fait.

J'ai vue dans le gestionnaire de paquets Synaptic qu'il m'était possible d'installer "mate-optimus". Je l'ai fait mais cela n'avais à première vue rien changé. J'ai donc réinstaller Debian Stretch et l'ai mis à jour. J'ai trouvé ceci qui semble correspondre à mon problème si ça peut aider :
- https://ubuntuforums.org/showthread.php?t=2115704 (j'ai essayé la commande indiqué, la réponse est "commande introuvable").
- https://www.debian-fr.org/t/optimus-dua … hdmi/66112
Voilà où j'en suis après avoir subit la Loi de Murphy, j'avoue être un peu perdu dans tout ça.

Hors ligne

#45 10-11-2016 04:44:59

robert2a
Membre
Lieu : France
Distrib. : Stretch
Noyau : Linux 4.8.0-1-amd64
(G)UI : Mate 1.16.1
Inscription : 15-11-2014

Re : Deuxième écran HDMI non reconnu / bug / carte graphique ?

Bonsoir
je n'ai pas le materiel pour tester , mais ce qui me dérange on ne voit a aucun moment le deuxieme écran.

pour faire court (et hélas je ne peut le vérifier ) , seul la carte intel compte (en 2D affichage du bureau ) , la carte nvidia ne vient qu en renfort pour la 3D (demande de plus de puissance ).
donc avec stretch +Mate (bureau léger) + driver intel , je vois pas pourquoi on ne peut pas faire du bi-écran sur cette machine (ou meme basculer de l écran du portable a l écran externe )

pour te repondre pour ceci => "gedit /etc/pulse/default.pa"

tu peut utiliser "cat" ou "nano" a la place de "gedit"

gedit fait parti de gnome (editeur texte ) , tu peut l'installer sur mate par :


apt-get install gedit
 



j'ai lu ton deuxieme lien => https://www.debian-fr.org/t/optimus-dua … hdmi/66112

j'ai compris driver intel et nouveau , mais optimus est il nécessaire ou pas hmm
d'aprés leur explication une carte graphique par écran roll

Nota: je viens de trouver ton post #35 sur les infos de win10  hmm

Dernière modification par robert2a (10-11-2016 05:09:14)

Hors ligne

#46 16-11-2016 19:27:59

Strato
Membre
Distrib. : HandyLinux-2.5 = Debian 8.6 (jessie)
Noyau : Linux 3.16.0-4-amd64
(G)UI : XFCE
Inscription : 11-10-2016

Re : Deuxième écran HDMI non reconnu / bug / carte graphique ?

Bonjour,
J'ai investi dans un câble "Mini Displayport (mini DP) vers DVI-D" (me disant que comme cette connectique ne prend en compte que l'image, cela devrais peut-être fonctionner) et cela fonctionne, mon second écran est reconnu et j'ai à présent un bureau étendu, ce qui est une bonne chose.
Cependant, si cela résous mon principale problème d'accès au second écran, ça ne résous pas le problème plus profond de la connexion HDMI, donc si vous le souhaitez et si cela vous semble utile je serait d'accord de poursuivre l'investigation.

xrandr


Screen 0: minimum 320 x 200, current 3286 x 1080, maximum 8192 x 8192
LVDS-1 connected 1366x768+0+0 (normal left inverted right x axis y axis) 344mm x 194mm
   1366x768      60.06*+
   1360x768      59.80    59.96  
   1024x768      60.04    60.00  
   960x720       60.00  
   928x696       60.05  
   896x672       60.01  
   960x600       60.00  
   960x540       59.99  
   800x600       60.00    60.32    56.25  
   840x525       60.01    59.88  
   800x512       60.17  
   700x525       59.98  
   640x512       60.02  
   720x450       59.89  
   640x480       60.00    59.94  
   680x384       59.80    59.96  
   576x432       60.06  
   512x384       60.00  
   400x300       60.32    56.34  
   320x240       60.05  
VGA-1 disconnected (normal left inverted right x axis y axis)
HDMI-1 connected 1920x1080+1366+0 (normal left inverted right x axis y axis) 531mm x 299mm
   1920x1080     60.00*+
   1600x1200     60.00  
   1680x1050     59.88  
   1280x1024     60.02  
   1440x900      59.90  
   1280x960      60.00  
   1152x720      59.97  
   1024x768      60.00  
   800x600       60.32    56.25  
   640x480       66.67    59.94  
DP-1 disconnected (normal left inverted right x axis y axis)
 


<= De ce que je comprend avec cette commande c'est qu'il semblerais que le système confonde la connexion HDMI avec le DisplayPort (DP). Par ailleurs, et pour rappel, bien que la commande affiche VGA, mon PC portable ne dispose pas de cette prise.

Si ça peut servir :
Avec le cable HDMI vers HDMI =>

 cat /var/log/Xorg.0.log


[    26.630] (II) NOUVEAU(G0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    26.630] (II) NOUVEAU(G0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    26.630] (II) NOUVEAU(G0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    26.630] (II) NOUVEAU(G0): Modeline "848x480"x60.0   33.75  848 864 976 1088  480 486 494 517 +hsync +vsync (31.0 kHz e)
[    26.630] (II) NOUVEAU(G0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    26.691] (II) NOUVEAU(G0): EDID for output HDMI-1-2
[    26.691] (II) NOUVEAU(G0): Manufacturer: IVM  Model: 6113  Serial#: 2214
[    26.691] (II) NOUVEAU(G0): Year: 2014  Week: 41
[    26.691] (II) NOUVEAU(G0): EDID Version: 1.3
[    26.691] (II) NOUVEAU(G0): Digital Display Input
[    26.691] (II) NOUVEAU(G0): Max Image Size [cm]: horiz.: 53  vert.: 30
[    26.691] (II) NOUVEAU(G0): Gamma: 2.20
[    26.691] (II) NOUVEAU(G0): DPMS capabilities: Off
[    26.691] (II) NOUVEAU(G0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[    26.691] (II) NOUVEAU(G0): First detailed timing is preferred mode
[    26.691] (II) NOUVEAU(G0): redX: 0.645 redY: 0.332   greenX: 0.315 greenY: 0.619
[    26.691] (II) NOUVEAU(G0): blueX: 0.151 blueY: 0.065   whiteX: 0.313 whiteY: 0.329
[    26.691] (II) NOUVEAU(G0): Supported established timings:
[    26.691] (II) NOUVEAU(G0): 640x480@60Hz
[    26.691] (II) NOUVEAU(G0): 640x480@67Hz
[    26.691] (II) NOUVEAU(G0): 800x600@56Hz
[    26.691] (II) NOUVEAU(G0): 800x600@60Hz
[    26.691] (II) NOUVEAU(G0): 1024x768@60Hz
[    26.691] (II) NOUVEAU(G0): Manufacturer's mask: 0
[    26.691] (II) NOUVEAU(G0): Supported standard timings:
[    26.691] (II) NOUVEAU(G0): #0: hsize: 1152  vsize 720  refresh: 60  vid: 113
[    26.691] (II) NOUVEAU(G0): #1: hsize: 1280  vsize 960  refresh: 60  vid: 16513
[    26.691] (II) NOUVEAU(G0): #2: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    26.691] (II) NOUVEAU(G0): #3: hsize: 1600  vsize 1200  refresh: 60  vid: 16553
[    26.691] (II) NOUVEAU(G0): #4: hsize: 1680  vsize 1050  refresh: 60  vid: 179
[    26.691] (II) NOUVEAU(G0): #5: hsize: 1440  vsize 900  refresh: 60  vid: 149
[    26.691] (II) NOUVEAU(G0): #6: hsize: 1920  vsize 1080  refresh: 60  vid: 49361
[    26.691] (II) NOUVEAU(G0): Supported detailed timing:
[    26.691] (II) NOUVEAU(G0): clock: 148.5 MHz   Image Size:  531 x 299 mm
[    26.691] (II) NOUVEAU(G0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[    26.691] (II) NOUVEAU(G0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[    26.691] (II) NOUVEAU(G0): Serial No: 1127844122214
[    26.691] (II) NOUVEAU(G0): Ranges: V min: 55 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
[    26.691] (II) NOUVEAU(G0): Monitor name: PLE2483H
[    26.691] (II) NOUVEAU(G0): Supported detailed timing:
[    26.691] (II) NOUVEAU(G0): clock: 148.5 MHz   Image Size:  531 x 299 mm
[    26.691] (II) NOUVEAU(G0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[    26.691] (II) NOUVEAU(G0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[    26.691] (II) NOUVEAU(G0): Supported detailed timing:
[    26.691] (II) NOUVEAU(G0): clock: 74.2 MHz   Image Size:  531 x 299 mm
[    26.691] (II) NOUVEAU(G0): h_active: 1920  h_sync: 2448  h_sync_end 2492 h_blank_end 2640 h_border: 0
[    26.691] (II) NOUVEAU(G0): v_active: 540  v_sync: 542  v_sync_end 547 v_blanking: 562 v_border: 0
[    26.691] (II) NOUVEAU(G0): Supported detailed timing:
[    26.691] (II) NOUVEAU(G0): clock: 74.2 MHz   Image Size:  531 x 299 mm
[    26.691] (II) NOUVEAU(G0): h_active: 1280  h_sync: 1720  h_sync_end 1760 h_blank_end 1980 h_border: 0
[    26.691] (II) NOUVEAU(G0): v_active: 720  v_sync: 725  v_sync_end 730 v_blanking: 750 v_border: 0
[    26.691] (II) NOUVEAU(G0): Supported detailed timing:
[    26.691] (II) NOUVEAU(G0): clock: 27.0 MHz   Image Size:  531 x 299 mm
[    26.691] (II) NOUVEAU(G0): h_active: 720  h_sync: 732  h_sync_end 796 h_blank_end 864 h_border: 0
[    26.691] (II) NOUVEAU(G0): v_active: 576  v_sync: 581  v_sync_end 586 v_blanking: 625 v_border: 0
[    26.691] (II) NOUVEAU(G0): Supported detailed timing:
[    26.691] (II) NOUVEAU(G0): clock: 148.5 MHz   Image Size:  531 x 299 mm
[    26.691] (II) NOUVEAU(G0): h_active: 1920  h_sync: 2448  h_sync_end 2492 h_blank_end 2640 h_border: 0
[    26.691] (II) NOUVEAU(G0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[    26.691] (II) NOUVEAU(G0): Number of EDID sections to follow: 1
[    26.692] (II) NOUVEAU(G0): EDID (in hex):
[    26.692] (II) NOUVEAU(G0):  00ffffffffffff0026cd1361a6080000
[    26.692] (II) NOUVEAU(G0):  2918010380351e782a0ef5a555509e26
[    26.692] (II) NOUVEAU(G0):  105054330800710081408180a940b300
[    26.692] (II) NOUVEAU(G0):  9500d1c00101023a801871382d40582c
[    26.692] (II) NOUVEAU(G0):  4500132b2100001e000000ff00313132
[    26.692] (II) NOUVEAU(G0):  37383434313232323134000000fd0037
[    26.692] (II) NOUVEAU(G0):  4c1e5311000a202020202020000000fc
[    26.692] (II) NOUVEAU(G0):  00504c4532343833480a20202020012d
[    26.692] (II) NOUVEAU(G0):  020322f14f9005040302011112131406
[    26.692] (II) NOUVEAU(G0):  0715161f230907018301000065030c00
[    26.692] (II) NOUVEAU(G0):  1000023a801871382d40582c4500132b
[    26.692] (II) NOUVEAU(G0):  2100001f011d80d0721c1620102c2580
[    26.692] (II) NOUVEAU(G0):  132b2100009e011d00bc52d01e20b828
[    26.692] (II) NOUVEAU(G0):  5540132b2100001e8c0ad09020403120
[    26.692] (II) NOUVEAU(G0):  0c405500132b21000018023a80d07238
[    26.692] (II) NOUVEAU(G0):  2d40102c4580132b2100001e000000d0
[    26.692] (II) NOUVEAU(G0): Printing probed modes for output HDMI-1-2
[    26.692] (II) NOUVEAU(G0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    26.692] (II) NOUVEAU(G0): Modeline "1920x1080"x50.0  148.50  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[    26.692] (II) NOUVEAU(G0): Modeline "1920x1080"x59.9  148.35  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[    26.692] (II) NOUVEAU(G0): Modeline "1920x1080i"x60.0   74.25  1920 2008 2052 2200  1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[    26.692] (II) NOUVEAU(G0): Modeline "1920x1080i"x50.0   74.25  1920 2448 2492 2640  1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[    26.692] (II) NOUVEAU(G0): Modeline "1920x1080i"x59.9   74.18  1920 2008 2052 2200  1080 1084 1094 1125 interlace +hsync +vsync (33.7 kHz e)
[    26.692] (II) NOUVEAU(G0): Modeline "1600x1200"x60.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[    26.692] (II) NOUVEAU(G0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[    26.692] (II) NOUVEAU(G0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    26.692] (II) NOUVEAU(G0): Modeline "1440x900"x59.9   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[    26.692] (II) NOUVEAU(G0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[    26.692] (II) NOUVEAU(G0): Modeline "1280x720"x60.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[    26.692] (II) NOUVEAU(G0): Modeline "1280x720"x50.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz e)
[    26.692] (II) NOUVEAU(G0): Modeline "1280x720"x59.9   74.18  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[    26.692] (II) NOUVEAU(G0): Modeline "1152x720"x60.0   67.28  1152 1208 1328 1504  720 721 724 746 -hsync +vsync (44.7 kHz)
[    26.692] (II) NOUVEAU(G0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    26.692] (II) NOUVEAU(G0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    26.692] (II) NOUVEAU(G0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    26.692] (II) NOUVEAU(G0): Modeline "720x576"x50.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz e)
[    26.692] (II) NOUVEAU(G0): Modeline "720x480"x60.0   27.03  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[    26.692] (II) NOUVEAU(G0): Modeline "720x480"x59.9   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[    26.692] (II) NOUVEAU(G0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    26.692] (II) NOUVEAU(G0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    26.692] (II) NOUVEAU(G0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    26.692] (II) NOUVEAU(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    26.692] (--) NOUVEAU(G0): Virtual size is 1024x768 (pitch 0)
[    26.692] (**) NOUVEAU(G0):  Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[    26.692] (II) NOUVEAU(G0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    26.692] (**) NOUVEAU(G0):  Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[    26.692] (II) NOUVEAU(G0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    26.692] (**) NOUVEAU(G0):  Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[    26.692] (II) NOUVEAU(G0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    26.692] (**) NOUVEAU(G0):  Driver mode "848x480": 33.8 MHz (scaled from 0.0 MHz), 31.0 kHz, 60.0 Hz
[    26.692] (II) NOUVEAU(G0): Modeline "848x480"x60.0   33.75  848 864 976 1088  480 486 494 517 +hsync +vsync (31.0 kHz e)
[    26.692] (**) NOUVEAU(G0):  Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 59.9 Hz
[    26.692] (II) NOUVEAU(G0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    26.692] (==) NOUVEAU(G0): DPI set to (96, 96)
[    26.692] (II) Loading sub module "fb"
[    26.692] (II) LoadModule: "fb"
[    26.692] (II) Loading /usr/lib/xorg/modules/libfb.so
[    26.692] (II) Module fb: vendor="X.Org Foundation"
[    26.692]  compiled for 1.18.4, module version = 1.0.0
[    26.692]  ABI class: X.Org ANSI C Emulation, version 0.4
[    26.692] (II) Loading sub module "shadowfb"
[    26.692] (II) LoadModule: "shadowfb"
[    26.692] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[    26.714] (II) Module shadowfb: vendor="X.Org Foundation"
[    26.714]  compiled for 1.18.4, module version = 1.0.0
[    26.714]  ABI class: X.Org ANSI C Emulation, version 0.4
[    26.714] (II) UnloadModule: "fbdev"
[    26.714] (II) Unloading fbdev
[    26.714] (II) UnloadSubModule: "fbdevhw"
[    26.714] (II) Unloading fbdevhw
[    26.714] (II) UnloadModule: "vesa"
[    26.714] (II) Unloading vesa
[    26.714] (==) Depth 24 pixmap format is 32 bpp
[    26.739] (II) NOUVEAU(G0): Channel setup complete.
[    26.763] (II) NOUVEAU(G0): [COPY] async initialised.
[    26.796] (II) NOUVEAU(G0): Hardware support for Present enabled
[    26.796] (II) NOUVEAU(G0): [DRI2] Setup complete
[    26.796] (II) NOUVEAU(G0): [DRI2]   DRI driver: nouveau
[    26.796] (II) NOUVEAU(G0): [DRI2]   VDPAU driver: nouveau
[    26.796] (II) Loading sub module "exa"
[    26.796] (II) LoadModule: "exa"
[    26.796] (II) Loading /usr/lib/xorg/modules/libexa.so
[    26.807] (II) Module exa: vendor="X.Org Foundation"
[    26.807]  compiled for 1.18.4, module version = 2.6.0
[    26.807]  ABI class: X.Org Video Driver, version 20.0
[    26.807] (II) EXA(256): Driver allocated offscreen pixmaps
[    26.807] (II) EXA(256): Driver registered support for the following operations:
[    26.807] (II)         Solid
[    26.807] (II)         Copy
[    26.807] (II)         Composite (RENDER acceleration)
[    26.807] (II)         UploadToScreen
[    26.807] (II)         DownloadFromScreen
[    26.807] (==) NOUVEAU(G0): Backing store enabled
[    26.807] (==) NOUVEAU(G0): Silken mouse enabled
[    26.807] (II) NOUVEAU(G0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[    26.807] (II) NOUVEAU(G0): [XvMC] Extension initialized.
[    26.807] (==) NOUVEAU(G0): DPMS enabled
[    26.807] (II) NOUVEAU(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    27.017] (==) modeset(0): Backing store enabled
[    27.017] (==) modeset(0): Silken mouse enabled
[    27.017] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    27.017] (==) modeset(0): DPMS enabled
[    27.017] (II) modeset(0): [DRI2] Setup complete
[    27.017] (II) modeset(0): [DRI2]   DRI driver: i965
[    27.017] (II) modeset(0): [DRI2]   VDPAU driver: i965
[    27.034] (--) RandR disabled
[    27.055] (II) SELinux: Disabled on system
[    27.113] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    27.113] (II) AIGLX: enabled GLX_ARB_create_context
[    27.113] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    27.113] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[    27.113] (II) AIGLX: enabled GLX_INTEL_swap_event
[    27.114] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    27.114] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[    27.114] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[    27.114] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[    27.114] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    27.114] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[    27.114] (II) AIGLX: Loaded and initialized i965
[    27.114] (II) GLX: Initialized DRI2 GL provider for screen 0
[    27.116] (II) NOUVEAU(G0): NVEnterVT is called.
[    27.234] (II) modeset(0): Damage tracking initialized
[    27.234] (II) modeset(0): Setting screen physical size to 361 x 203
[    28.097] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[    28.097] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    28.097] (II) LoadModule: "libinput"
[    28.097] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    28.382] (II) Module libinput: vendor="X.Org Foundation"
[    28.382]  compiled for 1.18.4, module version = 0.20.0
[    28.382]  Module class: X.Org XInput Driver
[    28.382]  ABI class: X.Org XInput driver, version 22.1
[    28.382] (II) Using input driver 'libinput' for 'Power Button'
[    28.382] (**) Power Button: always reports core events
[    28.382] (**) Option "Device" "/dev/input/event5"
[    28.382] (**) Option "_source" "server/udev"
[    28.383] (II) input device 'Power Button', /dev/input/event5 is tagged by udev as: Keyboard
[    28.383] (II) input device 'Power Button', /dev/input/event5 is a keyboard
[    28.396] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event5"
[    28.396] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    28.396] (**) Option "xkb_model" "pc105"
[    28.396] (**) Option "xkb_layout" "fr"
[    28.396] (**) Option "xkb_variant" "latin9"
[    28.533] (II) input device 'Power Button', /dev/input/event5 is tagged by udev as: Keyboard
[    28.533] (II) input device 'Power Button', /dev/input/event5 is a keyboard
[    28.534] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[    28.534] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    28.534] (II) Using input driver 'libinput' for 'Video Bus'
[    28.534] (**) Video Bus: always reports core events
[    28.534] (**) Option "Device" "/dev/input/event9"
[    28.534] (**) Option "_source" "server/udev"
[    28.535] (II) input device 'Video Bus', /dev/input/event9 is tagged by udev as: Keyboard
[    28.535] (II) input device 'Video Bus', /dev/input/event9 is a keyboard
[    28.544] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input14/event9"
[    28.544] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    28.544] (**) Option "xkb_model" "pc105"
[    28.544] (**) Option "xkb_layout" "fr"
[    28.544] (**) Option "xkb_variant" "latin9"
[    28.545] (II) input device 'Video Bus', /dev/input/event9 is tagged by udev as: Keyboard
[    28.545] (II) input device 'Video Bus', /dev/input/event9 is a keyboard
[    28.546] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[    28.546] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    28.546] (II) Using input driver 'libinput' for 'Video Bus'
[    28.546] (**) Video Bus: always reports core events
[    28.546] (**) Option "Device" "/dev/input/event7"
[    28.546] (**) Option "_source" "server/udev"
[    28.546] (II) input device 'Video Bus', /dev/input/event7 is tagged by udev as: Keyboard
[    28.546] (II) input device 'Video Bus', /dev/input/event7 is a keyboard
[    28.556] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:32/LNXVIDEO:00/input/input12/event7"
[    28.556] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[    28.556] (**) Option "xkb_model" "pc105"
[    28.556] (**) Option "xkb_layout" "fr"
[    28.556] (**) Option "xkb_variant" "latin9"
[    28.557] (II) input device 'Video Bus', /dev/input/event7 is tagged by udev as: Keyboard
[    28.557] (II) input device 'Video Bus', /dev/input/event7 is a keyboard
[    28.557] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    28.557] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    28.557] (II) Using input driver 'libinput' for 'Power Button'
[    28.558] (**) Power Button: always reports core events
[    28.558] (**) Option "Device" "/dev/input/event2"
[    28.558] (**) Option "_source" "server/udev"
[    28.558] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
[    28.558] (II) input device 'Power Button', /dev/input/event2 is a keyboard
[    28.568] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event2"
[    28.568] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[    28.568] (**) Option "xkb_model" "pc105"
[    28.568] (**) Option "xkb_layout" "fr"
[    28.568] (**) Option "xkb_variant" "latin9"
[    28.569] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
[    28.569] (II) input device 'Power Button', /dev/input/event2 is a keyboard
[    28.569] (II) config/udev: Adding input device Lid Switch (/dev/input/event4)
[    28.570] (II) No input driver specified, ignoring this device.
[    28.570] (II) This device may have been added with another device file.
[    28.570] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[    28.570] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[    28.570] (II) Using input driver 'libinput' for 'Sleep Button'
[    28.570] (**) Sleep Button: always reports core events
[    28.570] (**) Option "Device" "/dev/input/event3"
[    28.570] (**) Option "_source" "server/udev"
[    28.571] (II) input device 'Sleep Button', /dev/input/event3 is tagged by udev as: Keyboard
[    28.571] (II) input device 'Sleep Button', /dev/input/event3 is a keyboard
[    28.580] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4/event3"
[    28.580] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[    28.580] (**) Option "xkb_model" "pc105"
[    28.580] (**) Option "xkb_layout" "fr"
[    28.580] (**) Option "xkb_variant" "latin9"
[    28.581] (II) input device 'Sleep Button', /dev/input/event3 is tagged by udev as: Keyboard
[    28.581] (II) input device 'Sleep Button', /dev/input/event3 is a keyboard
[    28.583] (II) config/udev: Adding input device Laptop_Integrated_Webcam_2HDM (/dev/input/event8)
[    28.583] (**) Laptop_Integrated_Webcam_2HDM: Applying InputClass "libinput keyboard catchall"
[    28.583] (II) Using input driver 'libinput' for 'Laptop_Integrated_Webcam_2HDM'
[    28.583] (**) Laptop_Integrated_Webcam_2HDM: always reports core events
[    28.583] (**) Option "Device" "/dev/input/event8"
[    28.583] (**) Option "_source" "server/udev"
[    28.583] (II) input device 'Laptop_Integrated_Webcam_2HDM', /dev/input/event8 is tagged by udev as: Keyboard
[    28.583] (II) input device 'Laptop_Integrated_Webcam_2HDM', /dev/input/event8 is a keyboard
[    28.608] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input13/event8"
[    28.608] (II) XINPUT: Adding extended input device "Laptop_Integrated_Webcam_2HDM" (type: KEYBOARD, id 11)
[    28.608] (**) Option "xkb_model" "pc105"
[    28.608] (**) Option "xkb_layout" "fr"
[    28.608] (**) Option "xkb_variant" "latin9"
[    28.609] (II) input device 'Laptop_Integrated_Webcam_2HDM', /dev/input/event8 is tagged by udev as: Keyboard
[    28.609] (II) input device 'Laptop_Integrated_Webcam_2HDM', /dev/input/event8 is a keyboard
[    28.610] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event12)
[    28.610] (II) No input driver specified, ignoring this device.
[    28.610] (II) This device may have been added with another device file.
[    28.611] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event13)
[    28.611] (II) No input driver specified, ignoring this device.
[    28.611] (II) This device may have been added with another device file.
[    28.612] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event14)
[    28.612] (II) No input driver specified, ignoring this device.
[    28.612] (II) This device may have been added with another device file.
[    28.612] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event10)
[    28.612] (II) No input driver specified, ignoring this device.
[    28.612] (II) This device may have been added with another device file.
[    28.613] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event11)
[    28.613] (II) No input driver specified, ignoring this device.
[    28.613] (II) This device may have been added with another device file.
[    28.614] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    28.614] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[    28.614] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[    28.614] (**) AT Translated Set 2 keyboard: always reports core events
[    28.614] (**) Option "Device" "/dev/input/event0"
[    28.614] (**) Option "_source" "server/udev"
[    28.615] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[    28.615] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[    28.636] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    28.636] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[    28.636] (**) Option "xkb_model" "pc105"
[    28.636] (**) Option "xkb_layout" "fr"
[    28.636] (**) Option "xkb_variant" "latin9"
[    28.637] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[    28.637] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[    28.638] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event1)
[    28.638] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[    28.638] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad'
[    28.638] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    28.638] (**) Option "Device" "/dev/input/event1"
[    28.639] (**) Option "_source" "server/udev"
[    28.639] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event1 is tagged by udev as: Touchpad
[    28.639] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event1 is a touchpad
[    28.664] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input2/event1"
[    28.664] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[    28.665] (**) Option "AccelerationScheme" "none"
[    28.665] (**) SynPS/2 Synaptics TouchPad: (accel) selected scheme none/0
[    28.665] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    28.665] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    28.665] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event1 is tagged by udev as: Touchpad
[    28.666] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event1 is a touchpad
[    28.666] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[    28.666] (II) No input driver specified, ignoring this device.
[    28.666] (II) This device may have been added with another device file.
[    28.667] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[    28.667] (II) No input driver specified, ignoring this device.
[    28.667] (II) This device may have been added with another device file.
[    45.805] (II) modeset(0): EDID vendor "SEC", prod id 21569
[    45.806] (II) modeset(0): Printing DDC gathered Modelines:
[    45.806] (II) modeset(0): Modeline "1366x768"x0.0   71.56  1366 1414 1446 1510  768 770 775 789 +hsync -vsync (47.4 kHz eP)
[    46.057] (II) modeset(0): EDID vendor "SEC", prod id 21569
[    46.057] (II) modeset(0): Printing DDC gathered Modelines:
[    46.057] (II) modeset(0): Modeline "1366x768"x0.0   71.56  1366 1414 1446 1510  768 770 775 789 +hsync -vsync (47.4 kHz eP)
[    46.323] (II) modeset(0): EDID vendor "SEC", prod id 21569
[    46.323] (II) modeset(0): Printing DDC gathered Modelines:
[    46.323] (II) modeset(0): Modeline "1366x768"x0.0   71.56  1366 1414 1446 1510  768 770 775 789 +hsync -vsync (47.4 kHz eP)
[    46.576] (II) modeset(0): EDID vendor "SEC", prod id 21569
[    46.576] (II) modeset(0): Printing DDC gathered Modelines:
[    46.576] (II) modeset(0): Modeline "1366x768"x0.0   71.56  1366 1414 1446 1510  768 770 775 789 +hsync -vsync (47.4 kHz eP)
[    49.113] (II) modeset(0): EDID vendor "SEC", prod id 21569
[    49.113] (II) modeset(0): Printing DDC gathered Modelines:
[    49.113] (II) modeset(0): Modeline "1366x768"x0.0   71.56  1366 1414 1446 1510  768 770 775 789 +hsync -vsync (47.4 kHz eP)
[    54.058] (II) modeset(0): EDID vendor "SEC", prod id 21569
[    54.058] (II) modeset(0): Printing DDC gathered Modelines:
[    54.058] (II) modeset(0): Modeline "1366x768"x0.0   71.56  1366 1414 1446 1510  768 770 775 789 +hsync -vsync (47.4 kHz eP)
[    54.419] (II) modeset(0): EDID vendor "SEC", prod id 21569
[    54.420] (II) modeset(0): Printing DDC gathered Modelines:
[    54.420] (II) modeset(0): Modeline "1366x768"x0.0   71.56  1366 1414 1446 1510  768 770 775 789 +hsync -vsync (47.4 kHz eP)
[    62.901] (II) Axis 0x1 value 1152 is outside expected range [1242, 4894]
See https://wayland.freedesktop.org/libinput/doc/1.5.0//absolute_coordinate_ranges.html for details
[    64.353] (II) modeset(0): EDID vendor "SEC", prod id 21569
[    64.353] (II) modeset(0): Printing DDC gathered Modelines:
[    64.353] (II) modeset(0): Modeline "1366x768"x0.0   71.56  1366 1414 1446 1510  768 770 775 789 +hsync -vsync (47.4 kHz eP)
[    64.716] (II) modeset(0): EDID vendor "SEC", prod id 21569
[    64.716] (II) modeset(0): Printing DDC gathered Modelines:
[    64.716] (II) modeset(0): Modeline "1366x768"x0.0   71.56  1366 1414 1446 1510  768 770 775 789 +hsync -vsync (47.4 kHz eP)
[    74.652] (II) modeset(0): EDID vendor "SEC", prod id 21569
[    74.652] (II) modeset(0): Printing DDC gathered Modelines:
[    74.652] (II) modeset(0): Modeline "1366x768"x0.0   71.56  1366 1414 1446 1510  768 770 775 789 +hsync -vsync (47.4 kHz eP)
[    75.013] (II) modeset(0): EDID vendor "SEC", prod id 21569
[    75.013] (II) modeset(0): Printing DDC gathered Modelines:
[    75.013] (II) modeset(0): Modeline "1366x768"x0.0   71.56  1366 1414 1446 1510  768 770 775 789 +hsync -vsync (47.4 kHz eP)
[    84.951] (II) modeset(0): EDID vendor "SEC", prod id 21569
[    84.952] (II) modeset(0): Printing DDC gathered Modelines:
[    84.952] (II) modeset(0): Modeline "1366x768"x0.0   71.56  1366 1414 1446 1510  768 770 775 789 +hsync -vsync (47.4 kHz eP)
[    85.310] (II) modeset(0): EDID vendor "SEC", prod id 21569
[    85.310] (II) modeset(0): Printing DDC gathered Modelines:
[    85.310] (II) modeset(0): Modeline "1366x768"x0.0   71.56  1366 1414 1446 1510  768 770 775 789 +hsync -vsync (47.4 kHz eP)


Avec le cable DP vers DVI-D =>

 cat /var/log/Xorg.0.log


[    26.107] (II) modeset(0): Modeline "1366x768"x60.1   71.56  1366 1414 1446 1510  768 770 775 789 +hsync -vsync (47.4 kHz eP)
[    26.107] (II) modeset(0): Modeline "1360x768"x59.8   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsync (47.7 kHz d)
[    26.107] (II) modeset(0): Modeline "1360x768"x60.0   72.00  1360 1408 1440 1520  768 771 781 790 +hsync -vsync (47.4 kHz d)
[    26.107] (II) modeset(0): Modeline "1024x768"x120.1  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[    26.107] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[    26.107] (II) modeset(0): Modeline "960x720"x120.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[    26.107] (II) modeset(0): Modeline "928x696"x120.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[    26.107] (II) modeset(0): Modeline "896x672"x120.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[    26.107] (II) modeset(0): Modeline "960x600"x120.0   77.00  960 984 1000 1040  600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[    26.107] (II) modeset(0): Modeline "960x540"x120.0   69.25  960 984 1000 1040  540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[    26.107] (II) modeset(0): Modeline "800x600"x120.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[    26.107] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    26.107] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    26.107] (II) modeset(0): Modeline "840x525"x120.0   73.12  840 892 980 1120  525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[    26.107] (II) modeset(0): Modeline "840x525"x119.8   59.50  840 864 880 920  525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[    26.107] (II) modeset(0): Modeline "800x512"x120.3   51.56  800 800 828 832  512 512 514 515 doublescan +hsync +vsync (62.0 kHz d)
[    26.107] (II) modeset(0): Modeline "700x525"x120.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[    26.107] (II) modeset(0): Modeline "640x512"x120.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[    26.107] (II) modeset(0): Modeline "720x450"x119.8   53.25  720 760 836 952  450 451 454 467 doublescan -hsync +vsync (55.9 kHz d)
[    26.107] (II) modeset(0): Modeline "640x480"x120.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[    26.107] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[    26.107] (II) modeset(0): Modeline "680x384"x119.6   42.38  680 716 784 888  384 385 390 399 doublescan -hsync +vsync (47.7 kHz d)
[    26.107] (II) modeset(0): Modeline "680x384"x119.9   36.00  680 704 720 760  384 385 390 395 doublescan +hsync -vsync (47.4 kHz d)
[    26.107] (II) modeset(0): Modeline "576x432"x120.1   40.81  576 608 668 760  432 432 434 447 doublescan -hsync +vsync (53.7 kHz d)
[    26.107] (II) modeset(0): Modeline "512x384"x120.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[    26.107] (II) modeset(0): Modeline "400x300"x120.6   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[    26.107] (II) modeset(0): Modeline "400x300"x112.7   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[    26.107] (II) modeset(0): Modeline "320x240"x120.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[    26.224] (II) modeset(0): EDID for output VGA-1
[    26.240] (II) modeset(0): EDID for output HDMI-1
[    26.240] (II) modeset(0): Manufacturer: IVM  Model: 6113  Serial#: 2214
[    26.240] (II) modeset(0): Year: 2014  Week: 41
[    26.240] (II) modeset(0): EDID Version: 1.3
[    26.240] (II) modeset(0): Digital Display Input
[    26.240] (II) modeset(0): Max Image Size [cm]: horiz.: 53  vert.: 30
[    26.240] (II) modeset(0): Gamma: 2.20
[    26.240] (II) modeset(0): DPMS capabilities: Off
[    26.240] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[    26.240] (II) modeset(0): First detailed timing is preferred mode
[    26.240] (II) modeset(0): redX: 0.645 redY: 0.332   greenX: 0.315 greenY: 0.619
[    26.240] (II) modeset(0): blueX: 0.151 blueY: 0.065   whiteX: 0.313 whiteY: 0.329
[    26.240] (II) modeset(0): Supported established timings:
[    26.240] (II) modeset(0): 640x480@60Hz
[    26.240] (II) modeset(0): 640x480@67Hz
[    26.240] (II) modeset(0): 800x600@56Hz
[    26.240] (II) modeset(0): 800x600@60Hz
[    26.240] (II) modeset(0): 1024x768@60Hz
[    26.240] (II) modeset(0): Manufacturer's mask: 0
[    26.240] (II) modeset(0): Supported standard timings:
[    26.240] (II) modeset(0): #0: hsize: 1152  vsize 720  refresh: 60  vid: 113
[    26.240] (II) modeset(0): #1: hsize: 1280  vsize 960  refresh: 60  vid: 16513
[    26.240] (II) modeset(0): #2: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    26.240] (II) modeset(0): #3: hsize: 1600  vsize 1200  refresh: 60  vid: 16553
[    26.240] (II) modeset(0): #4: hsize: 1680  vsize 1050  refresh: 60  vid: 179
[    26.240] (II) modeset(0): #5: hsize: 1440  vsize 900  refresh: 60  vid: 149
[    26.240] (II) modeset(0): #6: hsize: 1920  vsize 1080  refresh: 60  vid: 49361
[    26.240] (II) modeset(0): Supported detailed timing:
[    26.240] (II) modeset(0): clock: 148.5 MHz   Image Size:  531 x 299 mm
[    26.240] (II) modeset(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[    26.240] (II) modeset(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[    26.241] (II) modeset(0): Serial No: 1127844122214
[    26.241] (II) modeset(0): Ranges: V min: 55 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
[    26.241] (II) modeset(0): Monitor name: PLE2483H
[    26.241] (II) modeset(0): EDID (in hex):
[    26.241] (II) modeset(0):   00ffffffffffff0026cd1361a6080000
[    26.241] (II) modeset(0):   2918010380351e782a0ef5a555509e26
[    26.241] (II) modeset(0):   105054330800710081408180a940b300
[    26.241] (II) modeset(0):   9500d1c00101023a801871382d40582c
[    26.241] (II) modeset(0):   4500132b2100001e000000ff00313132
[    26.241] (II) modeset(0):   37383434313232323134000000fd0037
[    26.241] (II) modeset(0):   4c1e5311000a202020202020000000fc
[    26.241] (II) modeset(0):   00504c4532343833480a20202020002e
[    26.241] (II) modeset(0): Printing probed modes for output HDMI-1
[    26.241] (II) modeset(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    26.241] (II) modeset(0): Modeline "1600x1200"x60.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[    26.241] (II) modeset(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[    26.241] (II) modeset(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    26.241] (II) modeset(0): Modeline "1440x900"x59.9   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[    26.241] (II) modeset(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[    26.241] (II) modeset(0): Modeline "1152x720"x60.0   67.28  1152 1208 1328 1504  720 721 724 746 -hsync +vsync (44.7 kHz)
[    26.241] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    26.241] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    26.241] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    26.241] (II) modeset(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    26.241] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    26.320] (II) modeset(0): EDID for output DP-1
[    26.320] (II) modeset(0): Output LVDS-1 connected
[    26.320] (II) modeset(0): Output VGA-1 disconnected
[    26.320] (II) modeset(0): Output HDMI-1 connected
[    26.320] (II) modeset(0): Output DP-1 disconnected
[    26.320] (II) modeset(0): Using spanning desktop for initial modes
[    26.320] (II) modeset(0): Output LVDS-1 using initial mode 1366x768 +0+0
[    26.320] (II) modeset(0): Output HDMI-1 using initial mode 1920x1080 +1366+0
[    26.320] (II) modeset(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    26.321] (==) modeset(0): DPI set to (96, 96)
[    26.321] (II) Loading sub module "fb"
[    26.321] (II) LoadModule: "fb"
[    26.321] (II) Loading /usr/lib/xorg/modules/libfb.so
[    26.331] (II) Module fb: vendor="X.Org Foundation"
[    26.331]  compiled for 1.18.4, module version = 1.0.0
[    26.331]  ABI class: X.Org ANSI C Emulation, version 0.4
[    26.331] (II) Loading sub module "dri2"
[    26.331] (II) LoadModule: "dri2"
[    26.331] (II) Module "dri2" already built-in
[    26.331] (--) NOUVEAU(G0): Chipset: "NVIDIA NVC1"
[    26.331] (==) NOUVEAU(G0): Depth 24, (--) framebuffer bpp 32
[    26.331] (==) NOUVEAU(G0): RGB weight 888
[    26.331] (==) NOUVEAU(G0): Default visual is TrueColor
[    26.331] (==) NOUVEAU(G0): Using HW cursor
[    26.331] (==) NOUVEAU(G0): Allowed maximum DRI level 2.
[    26.331] (==) NOUVEAU(G0): GLX sync to VBlank enabled.
[    26.331] (==) NOUVEAU(G0): Page flipping enabled
[    26.331] (==) NOUVEAU(G0): Swap limit set to 1 [Max allowed 2]
[    26.331] (==) NOUVEAU(G0): Page flipping synced to vblank by kernel.
[    26.331] (II) NOUVEAU(G0): Initializing outputs ...
[    26.342] (II) NOUVEAU(G0): Output VGA-1-2 has no monitor section
[    26.343] (II) NOUVEAU(G0): Output HDMI-1-2 has no monitor section
[    26.343] (II) NOUVEAU(G0): 2 crtcs needed for screen.
[    26.347] (II) NOUVEAU(G0): Allocated crtc nr. 0 to this screen.
[    26.347] (II) NOUVEAU(G0): Allocated crtc nr. 1 to this screen.
[    26.357] (II) NOUVEAU(G0): EDID for output VGA-1-2
[    26.357] (II) NOUVEAU(G0): Printing probed modes for output VGA-1-2
[    26.357] (II) NOUVEAU(G0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    26.357] (II) NOUVEAU(G0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    26.357] (II) NOUVEAU(G0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    26.357] (II) NOUVEAU(G0): Modeline "848x480"x60.0   33.75  848 864 976 1088  480 486 494 517 +hsync +vsync (31.0 kHz e)
[    26.357] (II) NOUVEAU(G0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    26.358] (II) NOUVEAU(G0): EDID for output HDMI-1-2
[    26.358] (II) NOUVEAU(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    26.358] (--) NOUVEAU(G0): Virtual size is 1024x768 (pitch 0)
[    26.358] (**) NOUVEAU(G0):  Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[    26.358] (II) NOUVEAU(G0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    26.358] (**) NOUVEAU(G0):  Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[    26.358] (II) NOUVEAU(G0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    26.358] (**) NOUVEAU(G0):  Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[    26.359] (II) NOUVEAU(G0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    26.359] (**) NOUVEAU(G0):  Driver mode "848x480": 33.8 MHz (scaled from 0.0 MHz), 31.0 kHz, 60.0 Hz
[    26.359] (II) NOUVEAU(G0): Modeline "848x480"x60.0   33.75  848 864 976 1088  480 486 494 517 +hsync +vsync (31.0 kHz e)
[    26.359] (**) NOUVEAU(G0):  Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 59.9 Hz
[    26.359] (II) NOUVEAU(G0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    26.359] (==) NOUVEAU(G0): DPI set to (96, 96)
[    26.359] (II) Loading sub module "fb"
[    26.359] (II) LoadModule: "fb"
[    26.359] (II) Loading /usr/lib/xorg/modules/libfb.so
[    26.359] (II) Module fb: vendor="X.Org Foundation"
[    26.359]  compiled for 1.18.4, module version = 1.0.0
[    26.359]  ABI class: X.Org ANSI C Emulation, version 0.4
[    26.359] (II) Loading sub module "shadowfb"
[    26.359] (II) LoadModule: "shadowfb"
[    26.359] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[    26.378] (II) Module shadowfb: vendor="X.Org Foundation"
[    26.378]  compiled for 1.18.4, module version = 1.0.0
[    26.378]  ABI class: X.Org ANSI C Emulation, version 0.4
[    26.378] (II) UnloadModule: "fbdev"
[    26.378] (II) Unloading fbdev
[    26.378] (II) UnloadSubModule: "fbdevhw"
[    26.378] (II) Unloading fbdevhw
[    26.378] (II) UnloadModule: "vesa"
[    26.378] (II) Unloading vesa
[    26.378] (==) Depth 24 pixmap format is 32 bpp
[    26.405] (II) NOUVEAU(G0): Channel setup complete.
[    26.430] (II) NOUVEAU(G0): [COPY] async initialised.
[    26.468] (II) NOUVEAU(G0): Hardware support for Present enabled
[    26.468] (II) NOUVEAU(G0): [DRI2] Setup complete
[    26.468] (II) NOUVEAU(G0): [DRI2]   DRI driver: nouveau
[    26.468] (II) NOUVEAU(G0): [DRI2]   VDPAU driver: nouveau
[    26.468] (II) Loading sub module "exa"
[    26.468] (II) LoadModule: "exa"
[    26.468] (II) Loading /usr/lib/xorg/modules/libexa.so
[    26.478] (II) Module exa: vendor="X.Org Foundation"
[    26.479]  compiled for 1.18.4, module version = 2.6.0
[    26.479]  ABI class: X.Org Video Driver, version 20.0
[    26.479] (II) EXA(256): Driver allocated offscreen pixmaps
[    26.479] (II) EXA(256): Driver registered support for the following operations:
[    26.479] (II)         Solid
[    26.479] (II)         Copy
[    26.479] (II)         Composite (RENDER acceleration)
[    26.479] (II)         UploadToScreen
[    26.479] (II)         DownloadFromScreen
[    26.479] (==) NOUVEAU(G0): Backing store enabled
[    26.479] (==) NOUVEAU(G0): Silken mouse enabled
[    26.479] (II) NOUVEAU(G0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[    26.479] (II) NOUVEAU(G0): [XvMC] Extension initialized.
[    26.479] (==) NOUVEAU(G0): DPMS enabled
[    26.479] (II) NOUVEAU(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    26.694] (==) modeset(0): Backing store enabled
[    26.694] (==) modeset(0): Silken mouse enabled
[    26.694] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    26.779] (==) modeset(0): DPMS enabled
[    26.780] (II) modeset(0): [DRI2] Setup complete
[    26.780] (II) modeset(0): [DRI2]   DRI driver: i965
[    26.780] (II) modeset(0): [DRI2]   VDPAU driver: i965
[    26.813] (--) RandR disabled
[    26.854] (II) SELinux: Disabled on system
[    26.894] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    26.894] (II) AIGLX: enabled GLX_ARB_create_context
[    26.894] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    26.894] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[    26.894] (II) AIGLX: enabled GLX_INTEL_swap_event
[    26.894] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    26.894] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[    26.894] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[    26.894] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[    26.894] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    26.894] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[    26.894] (II) AIGLX: Loaded and initialized i965
[    26.894] (II) GLX: Initialized DRI2 GL provider for screen 0
[    26.896] (II) NOUVEAU(G0): NVEnterVT is called.
[    26.922] (II) modeset(0): Damage tracking initialized
[    26.922] (II) modeset(0): Setting screen physical size to 869 x 285
[    28.041] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[    28.041] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    28.041] (II) LoadModule: "libinput"
[    28.041] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    28.231] (II) Module libinput: vendor="X.Org Foundation"
[    28.232]  compiled for 1.18.4, module version = 0.20.0
[    28.232]  Module class: X.Org XInput Driver
[    28.232]  ABI class: X.Org XInput driver, version 22.1
[    28.232] (II) Using input driver 'libinput' for 'Power Button'
[    28.232] (**) Power Button: always reports core events
[    28.232] (**) Option "Device" "/dev/input/event5"
[    28.232] (**) Option "_source" "server/udev"
[    28.233] (II) input device 'Power Button', /dev/input/event5 is tagged by udev as: Keyboard
[    28.233] (II) input device 'Power Button', /dev/input/event5 is a keyboard
[    28.248] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event5"
[    28.248] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    28.248] (**) Option "xkb_model" "pc105"
[    28.248] (**) Option "xkb_layout" "fr"
[    28.248] (**) Option "xkb_variant" "latin9"
[    28.479] (II) input device 'Power Button', /dev/input/event5 is tagged by udev as: Keyboard
[    28.479] (II) input device 'Power Button', /dev/input/event5 is a keyboard
[    28.480] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[    28.480] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    28.480] (II) Using input driver 'libinput' for 'Video Bus'
[    28.480] (**) Video Bus: always reports core events
[    28.480] (**) Option "Device" "/dev/input/event8"
[    28.480] (**) Option "_source" "server/udev"
[    28.481] (II) input device 'Video Bus', /dev/input/event8 is tagged by udev as: Keyboard
[    28.481] (II) input device 'Video Bus', /dev/input/event8 is a keyboard
[    28.492] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input13/event8"
[    28.492] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    28.492] (**) Option "xkb_model" "pc105"
[    28.492] (**) Option "xkb_layout" "fr"
[    28.492] (**) Option "xkb_variant" "latin9"
[    28.493] (II) input device 'Video Bus', /dev/input/event8 is tagged by udev as: Keyboard
[    28.493] (II) input device 'Video Bus', /dev/input/event8 is a keyboard
[    28.493] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[    28.494] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    28.494] (II) Using input driver 'libinput' for 'Video Bus'
[    28.494] (**) Video Bus: always reports core events
[    28.494] (**) Option "Device" "/dev/input/event7"
[    28.494] (**) Option "_source" "server/udev"
[    28.494] (II) input device 'Video Bus', /dev/input/event7 is tagged by udev as: Keyboard
[    28.494] (II) input device 'Video Bus', /dev/input/event7 is a keyboard
[    28.508] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:32/LNXVIDEO:00/input/input12/event7"
[    28.508] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[    28.508] (**) Option "xkb_model" "pc105"
[    28.508] (**) Option "xkb_layout" "fr"
[    28.508] (**) Option "xkb_variant" "latin9"
[    28.509] (II) input device 'Video Bus', /dev/input/event7 is tagged by udev as: Keyboard
[    28.509] (II) input device 'Video Bus', /dev/input/event7 is a keyboard
[    28.509] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    28.509] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    28.509] (II) Using input driver 'libinput' for 'Power Button'
[    28.509] (**) Power Button: always reports core events
[    28.509] (**) Option "Device" "/dev/input/event2"
[    28.510] (**) Option "_source" "server/udev"
[    28.510] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
[    28.510] (II) input device 'Power Button', /dev/input/event2 is a keyboard
[    28.520] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event2"
[    28.520] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[    28.520] (**) Option "xkb_model" "pc105"
[    28.520] (**) Option "xkb_layout" "fr"
[    28.520] (**) Option "xkb_variant" "latin9"
[    28.521] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
[    28.521] (II) input device 'Power Button', /dev/input/event2 is a keyboard
[    28.522] (II) config/udev: Adding input device Lid Switch (/dev/input/event4)
[    28.522] (II) No input driver specified, ignoring this device.
[    28.522] (II) This device may have been added with another device file.
[    28.523] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[    28.523] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[    28.523] (II) Using input driver 'libinput' for 'Sleep Button'
[    28.523] (**) Sleep Button: always reports core events
[    28.523] (**) Option "Device" "/dev/input/event3"
[    28.523] (**) Option "_source" "server/udev"
[    28.523] (II) input device 'Sleep Button', /dev/input/event3 is tagged by udev as: Keyboard
[    28.523] (II) input device 'Sleep Button', /dev/input/event3 is a keyboard
[    28.536] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4/event3"
[    28.536] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[    28.536] (**) Option "xkb_model" "pc105"
[    28.536] (**) Option "xkb_layout" "fr"
[    28.536] (**) Option "xkb_variant" "latin9"
[    28.537] (II) input device 'Sleep Button', /dev/input/event3 is tagged by udev as: Keyboard
[    28.537] (II) input device 'Sleep Button', /dev/input/event3 is a keyboard
[    28.539] (II) config/udev: Adding input device Laptop_Integrated_Webcam_2HDM (/dev/input/event9)
[    28.539] (**) Laptop_Integrated_Webcam_2HDM: Applying InputClass "libinput keyboard catchall"
[    28.539] (II) Using input driver 'libinput' for 'Laptop_Integrated_Webcam_2HDM'
[    28.539] (**) Laptop_Integrated_Webcam_2HDM: always reports core events
[    28.539] (**) Option "Device" "/dev/input/event9"
[    28.539] (**) Option "_source" "server/udev"
[    28.540] (II) input device 'Laptop_Integrated_Webcam_2HDM', /dev/input/event9 is tagged by udev as: Keyboard
[    28.540] (II) input device 'Laptop_Integrated_Webcam_2HDM', /dev/input/event9 is a keyboard
[    28.568] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input14/event9"
[    28.568] (II) XINPUT: Adding extended input device "Laptop_Integrated_Webcam_2HDM" (type: KEYBOARD, id 11)
[    28.568] (**) Option "xkb_model" "pc105"
[    28.568] (**) Option "xkb_layout" "fr"
[    28.568] (**) Option "xkb_variant" "latin9"
[    28.569] (II) input device 'Laptop_Integrated_Webcam_2HDM', /dev/input/event9 is tagged by udev as: Keyboard
[    28.569] (II) input device 'Laptop_Integrated_Webcam_2HDM', /dev/input/event9 is a keyboard
[    28.570] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event12)
[    28.570] (II) No input driver specified, ignoring this device.
[    28.570] (II) This device may have been added with another device file.
[    28.570] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event13)
[    28.570] (II) No input driver specified, ignoring this device.
[    28.570] (II) This device may have been added with another device file.
[    28.571] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event14)
[    28.571] (II) No input driver specified, ignoring this device.
[    28.571] (II) This device may have been added with another device file.
[    28.571] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event10)
[    28.572] (II) No input driver specified, ignoring this device.
[    28.572] (II) This device may have been added with another device file.
[    28.572] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event11)
[    28.572] (II) No input driver specified, ignoring this device.
[    28.572] (II) This device may have been added with another device file.
[    28.573] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    28.573] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[    28.573] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[    28.574] (**) AT Translated Set 2 keyboard: always reports core events
[    28.574] (**) Option "Device" "/dev/input/event0"
[    28.574] (**) Option "_source" "server/udev"
[    28.574] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[    28.574] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[    28.604] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    28.604] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[    28.604] (**) Option "xkb_model" "pc105"
[    28.604] (**) Option "xkb_layout" "fr"
[    28.604] (**) Option "xkb_variant" "latin9"
[    28.605] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[    28.605] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[    28.606] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event1)
[    28.606] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[    28.606] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad'
[    28.606] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    28.606] (**) Option "Device" "/dev/input/event1"
[    28.606] (**) Option "_source" "server/udev"
[    28.606] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event1 is tagged by udev as: Touchpad
[    28.606] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event1 is a touchpad
[    28.632] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input2/event1"
[    28.632] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[    28.633] (**) Option "AccelerationScheme" "none"
[    28.633] (**) SynPS/2 Synaptics TouchPad: (accel) selected scheme none/0
[    28.633] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    28.633] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    28.634] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event1 is tagged by udev as: Touchpad
[    28.634] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event1 is a touchpad
[    28.634] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[    28.634] (II) No input driver specified, ignoring this device.
[    28.634] (II) This device may have been added with another device file.
[    28.635] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[    28.635] (II) No input driver specified, ignoring this device.
[    28.635] (II) This device may have been added with another device file.
[    49.496] (II) modeset(0): EDID vendor "SEC", prod id 21569
[    49.496] (II) modeset(0): Printing DDC gathered Modelines:
[    49.496] (II) modeset(0): Modeline "1366x768"x0.0   71.56  1366 1414 1446 1510  768 770 775 789 +hsync -vsync (47.4 kHz eP)
[    49.711] (II) modeset(0): EDID vendor "SEC", prod id 21569
[    49.711] (II) modeset(0): Printing DDC gathered Modelines:
[    49.711] (II) modeset(0): Modeline "1366x768"x0.0   71.56  1366 1414 1446 1510  768 770 775 789 +hsync -vsync (47.4 kHz eP)
[    50.042] (II) modeset(0): EDID vendor "SEC", prod id 21569
[    50.042] (II) modeset(0): Printing DDC gathered Modelines:
[    50.042] (II) modeset(0): Modeline "1366x768"x0.0   71.56  1366 1414 1446 1510  768 770 775 789 +hsync -vsync (47.4 kHz eP)
[    50.257] (II) modeset(0): EDID vendor "SEC", prod id 21569
[    50.257] (II) modeset(0): Printing DDC gathered Modelines:
[    50.257] (II) modeset(0): Modeline "1366x768"x0.0   71.56  1366 1414 1446 1510  768 770 775 789 +hsync -vsync (47.4 kHz eP)
[    52.409] (II) modeset(0): EDID vendor "SEC", prod id 21569
[    52.409] (II) modeset(0): Printing DDC gathered Modelines:
[    52.409] (II) modeset(0): Modeline "1366x768"x0.0   71.56  1366 1414 1446 1510  768 770 775 789 +hsync -vsync (47.4 kHz eP)
[    64.350] (II) Axis 0x1 value 1213 is outside expected range [1242, 4894]
See https://wayland.freedesktop.org/libinput/doc/1.5.0//absolute_coordinate_ranges.html for details
 


robert2a a écrit :

pour faire court (et hélas je ne peut le vérifier ) , seul la carte intel compte (en 2D affichage du bureau ) , la carte nvidia ne vient qu en renfort pour la 3D (demande de plus de puissance ).

Si c'est intéressant, est-il possible de vérifier cela maintenant que le second écran est fonctionnel ?

Enfin pour ce qui est de https://ubuntuforums.org/showthread.php?t=2115704 ,j'obtiens

nano/etc/pulse/default.pa


bash: nano/etc/pulse/default.pa: Aucun fichier ou dossier de ce type



Ps : quelques complément d'informations
- Pour HandyLinux, avec le câble DP vers DVI-D le second écran est reconnu en clone, en installant ARandR il est alors possible d'avoir un bureau étendu.
- Pour le Live-Debian-Jessie-Mate, le second écran est également reconnu en clone et il faut se rendre dans les paramètre d'écran pour en faire un bureau étendu.

Indépendamment du second écran, lorsque je lance l'USB Live-Debian-Jessie-Mate, au moment du chargement il y a un message d'erreur "unexpectedly disconnected from boot status deamon" puis plus loin "[FAILED] Failed to start Show Plymouth Boot Screen. See 'systemctl status plymouth-start.service' for dedails." Ne sachant pas s'il peut y avoir un rapport je vous le notifie.

Dernière modification par Strato (16-11-2016 20:43:11)

Hors ligne

#47 16-11-2016 20:54:50

robert2a
Membre
Lieu : France
Distrib. : Stretch
Noyau : Linux 4.8.0-1-amd64
(G)UI : Mate 1.16.1
Inscription : 15-11-2014

Re : Deuxième écran HDMI non reconnu / bug / carte graphique ?

Bonsoir
toutes les sorties doivent fonctionner , avec Mate et stretch , il te faut bumblebee , d'aprés le log en post #44 , tu est en modesetting pour intel et le driver nouveau se charge bien pour ta carte nvidia
pour le bureau étendu quand le materiel est bien reconnu ça fonctionne (mode par défaut )
il te reste a installer bumblebee et faire les test 3D (intel et nvidia ) indiqué sur le wiki
il te suffit de démarrer le portable écran externe allumé et branché (hdmi ou dp ) et ça doit fonctionner

pour le retour hdmi , c'est la sortie de l'écran qui doit prise en compte de ta commande xrandr
dans le Xorg.0.log tu verra la sortie video utilisé hdmi ou dp de ta carte vidéo

pour le live jessie surement probleme de driver vidéo , l'autre distrib je connais pas mais surement meme chose

sur ta stretch installe bumblebee et fait tous les tests , ça devrait etre correct

ps:tu a peut etre un probleme sur le cordon hdmi (sur un écran Asus 24 pouces j'ai du forcer l affichage par le menu de l'écran en sélectionnant hdmi , alors que sur un Asus 27 tout c'est fait automatiquement )
j'ai testé plusieurs cordons

Dernière modification par robert2a (16-11-2016 21:02:01)

Hors ligne

#48 16-11-2016 23:52:05

Strato
Membre
Distrib. : HandyLinux-2.5 = Debian 8.6 (jessie)
Noyau : Linux 3.16.0-4-amd64
(G)UI : XFCE
Inscription : 11-10-2016

Re : Deuxième écran HDMI non reconnu / bug / carte graphique ?

pour le bureau étendu quand le matériel est bien reconnu ça fonctionne (mode par défaut )


Par défaut, avec une simple installation de Stretch sans rien de plus, cela fonctionne avec le cordon "DP vers DVI-D" mais pas avec le cordon "HDMI vers HDMI" (qui fonctionne avec W$)

pour le retour hdmi , c'est la sortie de l'écran qui doit prise en compte de ta commande xrandr
dans le Xorg.0.log tu verra la sortie video utilisé hdmi ou dp de ta carte vidéo

donc il est normal que dans le Xorg.0.log ce soit la sortie HDMI qui soit indiqué comme connecté alors que physiquement je suis connecté à partir de la sortie DP de l'ordinateur vers le port DVI-D de l'écran et aucune connexion physique en HDMI ?? =>

[    26.320] (II) modeset(0): Output LVDS-1 connected
[    26.320] (II) modeset(0): Output VGA-1 disconnected
[    26.320] (II) modeset(0): Output HDMI-1 connected
[    26.320] (II) modeset(0): Output DP-1 disconnected
[    26.320] (II) modeset(0): Using spanning desktop for initial modes
[    26.320] (II) modeset(0): Output LVDS-1 using initial mode 1366x768 +0+0
[    26.320] (II) modeset(0): Output HDMI-1 using initial mode 1920x1080 +1366+0


toutes les sorties doivent fonctionner , avec Mate et stretch , il te faut bumblebee, d'aprés le log en post #44 , tu est en modesetting pour intel et le driver nouveau se charge bien pour ta carte nvidia
pour le bureau étendu quand le materiel est bien reconnu ça fonctionne (mode par défaut )
il te reste a installer bumblebee et faire les test 3D (intel et nvidia ) indiqué sur le wiki
il te suffit de démarrer le portable écran externe allumé et branché (hdmi ou dp ) et ça doit fonctionner

Excuse moi, je comprend pas bien pourquoi il faut bumblebee puisque l'écran fonctionne sans bumblebee avec DP. Bumblebee me permettrait d'utiliser le cordon HDMI ? Ou tu me dit qu'il me reste à installer Bumblebee pour profiter de la 3D ?
Pour l'éventualité d'un problème matériel seulement lié au cordon HDMI j’essaierais si j'arrive à m'en procurer.

sur ta stretch installe bumblebee et fait tous les tests , ça devrait etre correct


Le Wiki dont tu me parles que je doit suivre est-ce celui-ci https://www.debian-fr.org/t/optimus-dua … hdmi/66112 ?
Je viens d'installer "mate-optimus" via Gestionnaire de paquets Synaptic et de me rendre compte que je me suis peut-être trompé car il n'est pas mentionné "Bumblebee". Du coup, c'est ce wiki que je doit suivre : https://debian-facile.org/doc:materiel: … ia:optimus ?

Dernière modification par Strato (16-11-2016 23:52:57)

Hors ligne

#49 17-11-2016 12:35:33

robert2a
Membre
Lieu : France
Distrib. : Stretch
Noyau : Linux 4.8.0-1-amd64
(G)UI : Mate 1.16.1
Inscription : 15-11-2014

Re : Deuxième écran HDMI non reconnu / bug / carte graphique ?

Bonjour
je te parle de quelque chose que je connais pas du tout "le portable avec technologie optimus" donc pas évident.
d'aprés ce que tu poste a priori avec stretch ça a l'air pas trop mal
installer bumblebee parce que ton portable en a besoin (avec windows c'est installé par défaut )
ça diminue ta consommation sur la batterie et te permet d utiliser des applications qui demande plus de puissance 3D (un jeux par exemple )
tu viens de poster ceci => "[    26.320] (II) modeset(0): Output HDMI-1 connected "  donc je t'ai dit une bétise , avec le mini DP => HDMI le log te donne utilisation de HDMI
aprés installation de "optimus" voir si quelque chose change au niveau du connecteur HDMI
j'espere avoir été plus clair smile

pour bien faire je devrais éviter de donner des conseils pour les portables , mais bon c'est dans ma nature wink

ps: si des connecteurs vidéo sont a l arriere de ton portable c'est pour etre utilisée et a minima les machines actuelles supporte 2 écrans
je n'ai aucune idée de comment sont géré ces connecteurs vis a vis des 2 cartes vidéo (intel et nvidia )
quand tu aura finit la configuration logicielle de ton portable tu pourra peut etre me le dire  wink

nota: pour optimus prendre l installation avec "nouveau" du wiki , c'est quelques commandes a lancer et tester la 3D intel et nvidia

ce wiki est un peu ancien => https://debian-facile.org/doc:materiel: … ia:optimus
a adapter a stretch et avoir un souces.list avec "main contrib non-free"

celui ci peut etre plus d'actualité  => https://wiki.debian.org/fr/Bumblebee

la commande :


apt-get install bumblebee primus
 

Dernière modification par robert2a (17-11-2016 12:44:57)

Hors ligne

#50 17-11-2016 14:34:12

Strato
Membre
Distrib. : HandyLinux-2.5 = Debian 8.6 (jessie)
Noyau : Linux 3.16.0-4-amd64
(G)UI : XFCE
Inscription : 11-10-2016

Re : Deuxième écran HDMI non reconnu / bug / carte graphique ?

Étant un débutant qui débute, donc vraiment pas familiarisé avec le vocabulaire, le matériel et les commandes, ton aide est vraiment la bienvenue et je t'en remercie.
Du coup, de ce que je vois, l'amélioration la plus significative a été l'achat du cordon "mini-DP vers DVI-D" qui permet d'avoir le second écran fonctionnel sur n'importe quel distribution.
Pour ce qui est de Stretch-mate il semble que le principale avantage soit que les paramétrages sont facilités. Par exemple les deux écran avec la bonne résolution par défaut, ou encore des paquets plus actuels. Pour ce qui est des commandes et retour de commandes c'est encore une langue étrangère pour moi...

tu viens de poster ceci => "[    26.320] (II) modeset(0): Output HDMI-1 connected "  donc je t'ai dit une bétise , avec le mini DP => HDMI le log te donne utilisation de HDMI
aprés installation de "optimus" voir si quelque chose change au niveau du connecteur HDMI


J'ai "mate-optimus" d'installé, celui-ci : https://packages.debian.org/stretch/mate-optimus, donc pas celui que tu viens de m’indiquer il semble ... Du coup, je pense que je vais le désinstaller puis installer se que tu me suggère peut-être... ? Mais pour le moment je peut te donner le retour de commande si ça peut servir. A priori c'est toujours HDMI qui est reconnu connecté alors que physiquement je suis sur le mini-DP de l'ordinateur et le DVI-D de l'écran externe :

 cat /var/log/Xorg.0.log


Réponse complète =>

[    27.443] (II) modeset(0): Modeline "1360x768"x60.0   72.00  1360 1408 1440 1520  768 771 781 790 +hsync -vsync (47.4 kHz d)
[    27.443] (II) modeset(0): Modeline "1024x768"x120.1  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[    27.443] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[    27.443] (II) modeset(0): Modeline "960x720"x120.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[    27.443] (II) modeset(0): Modeline "928x696"x120.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[    27.443] (II) modeset(0): Modeline "896x672"x120.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[    27.443] (II) modeset(0): Modeline "960x600"x120.0   77.00  960 984 1000 1040  600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[    27.443] (II) modeset(0): Modeline "960x540"x120.0   69.25  960 984 1000 1040  540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[    27.443] (II) modeset(0): Modeline "800x600"x120.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[    27.443] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    27.443] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    27.443] (II) modeset(0): Modeline "840x525"x120.0   73.12  840 892 980 1120  525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[    27.443] (II) modeset(0): Modeline "840x525"x119.8   59.50  840 864 880 920  525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[    27.443] (II) modeset(0): Modeline "800x512"x120.3   51.56  800 800 828 832  512 512 514 515 doublescan +hsync +vsync (62.0 kHz d)
[    27.443] (II) modeset(0): Modeline "700x525"x120.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[    27.443] (II) modeset(0): Modeline "640x512"x120.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[    27.443] (II) modeset(0): Modeline "720x450"x119.8   53.25  720 760 836 952  450 451 454 467 doublescan -hsync +vsync (55.9 kHz d)
[    27.443] (II) modeset(0): Modeline "640x480"x120.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[    27.443] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[    27.443] (II) modeset(0): Modeline "680x384"x119.6   42.38  680 716 784 888  384 385 390 399 doublescan -hsync +vsync (47.7 kHz d)
[    27.443] (II) modeset(0): Modeline "680x384"x119.9   36.00  680 704 720 760  384 385 390 395 doublescan +hsync -vsync (47.4 kHz d)
[    27.443] (II) modeset(0): Modeline "576x432"x120.1   40.81  576 608 668 760  432 432 434 447 doublescan -hsync +vsync (53.7 kHz d)
[    27.443] (II) modeset(0): Modeline "512x384"x120.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[    27.443] (II) modeset(0): Modeline "400x300"x120.6   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[    27.443] (II) modeset(0): Modeline "400x300"x112.7   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[    27.443] (II) modeset(0): Modeline "320x240"x120.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[    27.560] (II) modeset(0): EDID for output VGA-1
[    27.576] (II) modeset(0): EDID for output HDMI-1
[    27.576] (II) modeset(0): Manufacturer: IVM  Model: 6113  Serial#: 2214
[    27.576] (II) modeset(0): Year: 2014  Week: 41
[    27.576] (II) modeset(0): EDID Version: 1.3
[    27.576] (II) modeset(0): Digital Display Input
[    27.576] (II) modeset(0): Max Image Size [cm]: horiz.: 53  vert.: 30
[    27.576] (II) modeset(0): Gamma: 2.20
[    27.576] (II) modeset(0): DPMS capabilities: Off
[    27.576] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[    27.576] (II) modeset(0): First detailed timing is preferred mode
[    27.576] (II) modeset(0): redX: 0.645 redY: 0.332   greenX: 0.315 greenY: 0.619
[    27.576] (II) modeset(0): blueX: 0.151 blueY: 0.065   whiteX: 0.313 whiteY: 0.329
[    27.577] (II) modeset(0): Supported established timings:
[    27.577] (II) modeset(0): 640x480@60Hz
[    27.577] (II) modeset(0): 640x480@67Hz
[    27.577] (II) modeset(0): 800x600@56Hz
[    27.577] (II) modeset(0): 800x600@60Hz
[    27.577] (II) modeset(0): 1024x768@60Hz
[    27.577] (II) modeset(0): Manufacturer's mask: 0
[    27.577] (II) modeset(0): Supported standard timings:
[    27.577] (II) modeset(0): #0: hsize: 1152  vsize 720  refresh: 60  vid: 113
[    27.577] (II) modeset(0): #1: hsize: 1280  vsize 960  refresh: 60  vid: 16513
[    27.577] (II) modeset(0): #2: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    27.577] (II) modeset(0): #3: hsize: 1600  vsize 1200  refresh: 60  vid: 16553
[    27.577] (II) modeset(0): #4: hsize: 1680  vsize 1050  refresh: 60  vid: 179
[    27.577] (II) modeset(0): #5: hsize: 1440  vsize 900  refresh: 60  vid: 149
[    27.577] (II) modeset(0): #6: hsize: 1920  vsize 1080  refresh: 60  vid: 49361
[    27.577] (II) modeset(0): Supported detailed timing:
[    27.577] (II) modeset(0): clock: 148.5 MHz   Image Size:  531 x 299 mm
[    27.577] (II) modeset(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[    27.577] (II) modeset(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[    27.577] (II) modeset(0): Serial No: 1127844122214
[    27.577] (II) modeset(0): Ranges: V min: 55 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
[    27.577] (II) modeset(0): Monitor name: PLE2483H
[    27.577] (II) modeset(0): EDID (in hex):
[    27.577] (II) modeset(0):   00ffffffffffff0026cd1361a6080000
[    27.577] (II) modeset(0):   2918010380351e782a0ef5a555509e26
[    27.577] (II) modeset(0):   105054330800710081408180a940b300
[    27.577] (II) modeset(0):   9500d1c00101023a801871382d40582c
[    27.577] (II) modeset(0):   4500132b2100001e000000ff00313132
[    27.577] (II) modeset(0):   37383434313232323134000000fd0037
[    27.577] (II) modeset(0):   4c1e5311000a202020202020000000fc
[    27.577] (II) modeset(0):   00504c4532343833480a20202020002e
[    27.577] (II) modeset(0): Printing probed modes for output HDMI-1
[    27.577] (II) modeset(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    27.577] (II) modeset(0): Modeline "1600x1200"x60.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[    27.577] (II) modeset(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[    27.577] (II) modeset(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    27.577] (II) modeset(0): Modeline "1440x900"x59.9   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[    27.577] (II) modeset(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[    27.577] (II) modeset(0): Modeline "1152x720"x60.0   67.28  1152 1208 1328 1504  720 721 724 746 -hsync +vsync (44.7 kHz)
[    27.577] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    27.577] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    27.577] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    27.577] (II) modeset(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    27.577] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    27.655] (II) modeset(0): EDID for output DP-1
[    27.655] (II) modeset(0): Output LVDS-1 connected
[    27.655] (II) modeset(0): Output VGA-1 disconnected
[    27.655] (II) modeset(0): Output HDMI-1 connected
[    27.655] (II) modeset(0): Output DP-1 disconnected
[    27.655] (II) modeset(0): Using spanning desktop for initial modes
[    27.655] (II) modeset(0): Output LVDS-1 using initial mode 1366x768 +0+0
[    27.655] (II) modeset(0): Output HDMI-1 using initial mode 1920x1080 +1366+0
[    27.655] (II) modeset(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    27.655] (==) modeset(0): DPI set to (96, 96)
[    27.655] (II) Loading sub module "fb"
[    27.655] (II) LoadModule: "fb"
[    27.656] (II) Loading /usr/lib/xorg/modules/libfb.so
[    27.668] (II) Module fb: vendor="X.Org Foundation"
[    27.668]  compiled for 1.18.4, module version = 1.0.0
[    27.668]  ABI class: X.Org ANSI C Emulation, version 0.4
[    27.668] (II) Loading sub module "dri2"
[    27.668] (II) LoadModule: "dri2"
[    27.668] (II) Module "dri2" already built-in
[    27.668] (--) NOUVEAU(G0): Chipset: "NVIDIA NVC1"
[    27.668] (==) NOUVEAU(G0): Depth 24, (--) framebuffer bpp 32
[    27.668] (==) NOUVEAU(G0): RGB weight 888
[    27.668] (==) NOUVEAU(G0): Default visual is TrueColor
[    27.668] (==) NOUVEAU(G0): Using HW cursor
[    27.668] (==) NOUVEAU(G0): Allowed maximum DRI level 2.
[    27.668] (==) NOUVEAU(G0): GLX sync to VBlank enabled.
[    27.668] (==) NOUVEAU(G0): Page flipping enabled
[    27.668] (==) NOUVEAU(G0): Swap limit set to 1 [Max allowed 2]
[    27.668] (==) NOUVEAU(G0): Page flipping synced to vblank by kernel.
[    27.668] (II) NOUVEAU(G0): Initializing outputs ...
[    27.679] (II) NOUVEAU(G0): Output VGA-1-2 has no monitor section
[    27.680] (II) NOUVEAU(G0): Output HDMI-1-2 has no monitor section
[    27.680] (II) NOUVEAU(G0): 2 crtcs needed for screen.
[    27.683] (II) NOUVEAU(G0): Allocated crtc nr. 0 to this screen.
[    27.683] (II) NOUVEAU(G0): Allocated crtc nr. 1 to this screen.
[    27.693] (II) NOUVEAU(G0): EDID for output VGA-1-2
[    27.693] (II) NOUVEAU(G0): Printing probed modes for output VGA-1-2
[    27.693] (II) NOUVEAU(G0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    27.693] (II) NOUVEAU(G0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    27.693] (II) NOUVEAU(G0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    27.693] (II) NOUVEAU(G0): Modeline "848x480"x60.0   33.75  848 864 976 1088  480 486 494 517 +hsync +vsync (31.0 kHz e)
[    27.693] (II) NOUVEAU(G0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    27.694] (II) NOUVEAU(G0): EDID for output HDMI-1-2
[    27.694] (II) NOUVEAU(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    27.694] (--) NOUVEAU(G0): Virtual size is 1024x768 (pitch 0)
[    27.694] (**) NOUVEAU(G0):  Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[    27.694] (II) NOUVEAU(G0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    27.694] (**) NOUVEAU(G0):  Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[    27.694] (II) NOUVEAU(G0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    27.694] (**) NOUVEAU(G0):  Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[    27.694] (II) NOUVEAU(G0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    27.695] (**) NOUVEAU(G0):  Driver mode "848x480": 33.8 MHz (scaled from 0.0 MHz), 31.0 kHz, 60.0 Hz
[    27.695] (II) NOUVEAU(G0): Modeline "848x480"x60.0   33.75  848 864 976 1088  480 486 494 517 +hsync +vsync (31.0 kHz e)
[    27.695] (**) NOUVEAU(G0):  Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 59.9 Hz
[    27.695] (II) NOUVEAU(G0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    27.695] (==) NOUVEAU(G0): DPI set to (96, 96)
[    27.695] (II) Loading sub module "fb"
[    27.695] (II) LoadModule: "fb"
[    27.695] (II) Loading /usr/lib/xorg/modules/libfb.so
[    27.695] (II) Module fb: vendor="X.Org Foundation"
[    27.695]  compiled for 1.18.4, module version = 1.0.0
[    27.695]  ABI class: X.Org ANSI C Emulation, version 0.4
[    27.695] (II) Loading sub module "shadowfb"
[    27.695] (II) LoadModule: "shadowfb"
[    27.695] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[    27.714] (II) Module shadowfb: vendor="X.Org Foundation"
[    27.714]  compiled for 1.18.4, module version = 1.0.0
[    27.714]  ABI class: X.Org ANSI C Emulation, version 0.4
[    27.714] (II) UnloadModule: "fbdev"
[    27.714] (II) Unloading fbdev
[    27.714] (II) UnloadSubModule: "fbdevhw"
[    27.714] (II) Unloading fbdevhw
[    27.715] (II) UnloadModule: "vesa"
[    27.715] (II) Unloading vesa
[    27.715] (==) Depth 24 pixmap format is 32 bpp
[    27.742] (II) NOUVEAU(G0): Channel setup complete.
[    27.770] (II) NOUVEAU(G0): [COPY] async initialised.
[    27.804] (II) NOUVEAU(G0): Hardware support for Present enabled
[    27.804] (II) NOUVEAU(G0): [DRI2] Setup complete
[    27.804] (II) NOUVEAU(G0): [DRI2]   DRI driver: nouveau
[    27.804] (II) NOUVEAU(G0): [DRI2]   VDPAU driver: nouveau
[    27.804] (II) Loading sub module "exa"
[    27.804] (II) LoadModule: "exa"
[    27.805] (II) Loading /usr/lib/xorg/modules/libexa.so
[    27.815] (II) Module exa: vendor="X.Org Foundation"
[    27.815]  compiled for 1.18.4, module version = 2.6.0
[    27.815]  ABI class: X.Org Video Driver, version 20.0
[    27.816] (II) EXA(256): Driver allocated offscreen pixmaps
[    27.816] (II) EXA(256): Driver registered support for the following operations:
[    27.816] (II)         Solid
[    27.816] (II)         Copy
[    27.816] (II)         Composite (RENDER acceleration)
[    27.816] (II)         UploadToScreen
[    27.816] (II)         DownloadFromScreen
[    27.816] (==) NOUVEAU(G0): Backing store enabled
[    27.816] (==) NOUVEAU(G0): Silken mouse enabled
[    27.816] (II) NOUVEAU(G0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[    27.816] (II) NOUVEAU(G0): [XvMC] Extension initialized.
[    27.816] (==) NOUVEAU(G0): DPMS enabled
[    27.816] (II) NOUVEAU(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    28.025] (==) modeset(0): Backing store enabled
[    28.025] (==) modeset(0): Silken mouse enabled
[    28.025] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    28.110] (==) modeset(0): DPMS enabled
[    28.110] (II) modeset(0): [DRI2] Setup complete
[    28.110] (II) modeset(0): [DRI2]   DRI driver: i965
[    28.110] (II) modeset(0): [DRI2]   VDPAU driver: i965
[    28.159] (--) RandR disabled
[    28.191] (II) SELinux: Disabled on system
[    28.246] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    28.246] (II) AIGLX: enabled GLX_ARB_create_context
[    28.246] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    28.246] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[    28.246] (II) AIGLX: enabled GLX_INTEL_swap_event
[    28.246] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    28.246] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[    28.246] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[    28.246] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[    28.246] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    28.246] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[    28.246] (II) AIGLX: Loaded and initialized i965
[    28.246] (II) GLX: Initialized DRI2 GL provider for screen 0
[    28.248] (II) NOUVEAU(G0): NVEnterVT is called.
[    28.401] (II) modeset(0): Damage tracking initialized
[    28.401] (II) modeset(0): Setting screen physical size to 869 x 285
[    29.348] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[    29.349] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    29.349] (II) LoadModule: "libinput"
[    29.349] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    29.705] (II) Module libinput: vendor="X.Org Foundation"
[    29.705]  compiled for 1.18.4, module version = 0.20.0
[    29.705]  Module class: X.Org XInput Driver
[    29.705]  ABI class: X.Org XInput driver, version 22.1
[    29.705] (II) Using input driver 'libinput' for 'Power Button'
[    29.705] (**) Power Button: always reports core events
[    29.705] (**) Option "Device" "/dev/input/event5"
[    29.705] (**) Option "_source" "server/udev"
[    29.706] (II) input device 'Power Button', /dev/input/event5 is tagged by udev as: Keyboard
[    29.706] (II) input device 'Power Button', /dev/input/event5 is a keyboard
[    29.716] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event5"
[    29.716] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    29.716] (**) Option "xkb_model" "pc105"
[    29.716] (**) Option "xkb_layout" "fr"
[    29.716] (**) Option "xkb_variant" "latin9"
[    29.918] (II) input device 'Power Button', /dev/input/event5 is tagged by udev as: Keyboard
[    29.919] (II) input device 'Power Button', /dev/input/event5 is a keyboard
[    29.920] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[    29.920] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    29.920] (II) Using input driver 'libinput' for 'Video Bus'
[    29.920] (**) Video Bus: always reports core events
[    29.920] (**) Option "Device" "/dev/input/event8"
[    29.920] (**) Option "_source" "server/udev"
[    29.921] (II) input device 'Video Bus', /dev/input/event8 is tagged by udev as: Keyboard
[    29.921] (II) input device 'Video Bus', /dev/input/event8 is a keyboard
[    29.936] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input13/event8"
[    29.936] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    29.936] (**) Option "xkb_model" "pc105"
[    29.936] (**) Option "xkb_layout" "fr"
[    29.936] (**) Option "xkb_variant" "latin9"
[    29.937] (II) input device 'Video Bus', /dev/input/event8 is tagged by udev as: Keyboard
[    29.937] (II) input device 'Video Bus', /dev/input/event8 is a keyboard
[    29.938] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[    29.938] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    29.938] (II) Using input driver 'libinput' for 'Video Bus'
[    29.938] (**) Video Bus: always reports core events
[    29.938] (**) Option "Device" "/dev/input/event7"
[    29.938] (**) Option "_source" "server/udev"
[    29.939] (II) input device 'Video Bus', /dev/input/event7 is tagged by udev as: Keyboard
[    29.939] (II) input device 'Video Bus', /dev/input/event7 is a keyboard
[    29.948] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:32/LNXVIDEO:00/input/input12/event7"
[    29.948] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[    29.948] (**) Option "xkb_model" "pc105"
[    29.948] (**) Option "xkb_layout" "fr"
[    29.948] (**) Option "xkb_variant" "latin9"
[    29.949] (II) input device 'Video Bus', /dev/input/event7 is tagged by udev as: Keyboard
[    29.949] (II) input device 'Video Bus', /dev/input/event7 is a keyboard
[    29.950] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    29.950] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    29.950] (II) Using input driver 'libinput' for 'Power Button'
[    29.950] (**) Power Button: always reports core events
[    29.950] (**) Option "Device" "/dev/input/event2"
[    29.950] (**) Option "_source" "server/udev"
[    29.950] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
[    29.950] (II) input device 'Power Button', /dev/input/event2 is a keyboard
[    29.960] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event2"
[    29.960] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[    29.960] (**) Option "xkb_model" "pc105"
[    29.960] (**) Option "xkb_layout" "fr"
[    29.960] (**) Option "xkb_variant" "latin9"
[    29.961] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
[    29.961] (II) input device 'Power Button', /dev/input/event2 is a keyboard
[    29.962] (II) config/udev: Adding input device Lid Switch (/dev/input/event4)
[    29.962] (II) No input driver specified, ignoring this device.
[    29.962] (II) This device may have been added with another device file.
[    29.962] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[    29.962] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[    29.962] (II) Using input driver 'libinput' for 'Sleep Button'
[    29.962] (**) Sleep Button: always reports core events
[    29.962] (**) Option "Device" "/dev/input/event3"
[    29.962] (**) Option "_source" "server/udev"
[    29.963] (II) input device 'Sleep Button', /dev/input/event3 is tagged by udev as: Keyboard
[    29.963] (II) input device 'Sleep Button', /dev/input/event3 is a keyboard
[    29.972] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4/event3"
[    29.972] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[    29.972] (**) Option "xkb_model" "pc105"
[    29.972] (**) Option "xkb_layout" "fr"
[    29.972] (**) Option "xkb_variant" "latin9"
[    29.973] (II) input device 'Sleep Button', /dev/input/event3 is tagged by udev as: Keyboard
[    29.973] (II) input device 'Sleep Button', /dev/input/event3 is a keyboard
[    29.975] (II) config/udev: Adding input device Laptop_Integrated_Webcam_2HDM (/dev/input/event14)
[    29.975] (**) Laptop_Integrated_Webcam_2HDM: Applying InputClass "libinput keyboard catchall"
[    29.975] (II) Using input driver 'libinput' for 'Laptop_Integrated_Webcam_2HDM'
[    29.975] (**) Laptop_Integrated_Webcam_2HDM: always reports core events
[    29.975] (**) Option "Device" "/dev/input/event14"
[    29.975] (**) Option "_source" "server/udev"
[    29.975] (II) input device 'Laptop_Integrated_Webcam_2HDM', /dev/input/event14 is tagged by udev as: Keyboard
[    29.975] (II) input device 'Laptop_Integrated_Webcam_2HDM', /dev/input/event14 is a keyboard
[    30.008] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input15/event14"
[    30.008] (II) XINPUT: Adding extended input device "Laptop_Integrated_Webcam_2HDM" (type: KEYBOARD, id 11)
[    30.008] (**) Option "xkb_model" "pc105"
[    30.008] (**) Option "xkb_layout" "fr"
[    30.008] (**) Option "xkb_variant" "latin9"
[    30.009] (II) input device 'Laptop_Integrated_Webcam_2HDM', /dev/input/event14 is tagged by udev as: Keyboard
[    30.009] (II) input device 'Laptop_Integrated_Webcam_2HDM', /dev/input/event14 is a keyboard
[    30.010] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event11)
[    30.010] (II) No input driver specified, ignoring this device.
[    30.010] (II) This device may have been added with another device file.
[    30.010] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event12)
[    30.010] (II) No input driver specified, ignoring this device.
[    30.010] (II) This device may have been added with another device file.
[    30.011] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event13)
[    30.011] (II) No input driver specified, ignoring this device.
[    30.011] (II) This device may have been added with another device file.
[    30.011] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9)
[    30.011] (II) No input driver specified, ignoring this device.
[    30.011] (II) This device may have been added with another device file.
[    30.012] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event10)
[    30.012] (II) No input driver specified, ignoring this device.
[    30.012] (II) This device may have been added with another device file.
[    30.012] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    30.012] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[    30.012] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[    30.012] (**) AT Translated Set 2 keyboard: always reports core events
[    30.012] (**) Option "Device" "/dev/input/event0"
[    30.012] (**) Option "_source" "server/udev"
[    30.013] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[    30.013] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[    30.040] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    30.040] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[    30.040] (**) Option "xkb_model" "pc105"
[    30.040] (**) Option "xkb_layout" "fr"
[    30.040] (**) Option "xkb_variant" "latin9"
[    30.042] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[    30.042] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[    30.043] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event1)
[    30.043] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[    30.043] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad'
[    30.043] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    30.043] (**) Option "Device" "/dev/input/event1"
[    30.043] (**) Option "_source" "server/udev"
[    30.044] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event1 is tagged by udev as: Touchpad
[    30.044] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event1 is a touchpad
[    30.092] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input2/event1"
[    30.092] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[    30.093] (**) Option "AccelerationScheme" "none"
[    30.093] (**) SynPS/2 Synaptics TouchPad: (accel) selected scheme none/0
[    30.093] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    30.093] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    30.094] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event1 is tagged by udev as: Touchpad
[    30.094] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event1 is a touchpad
[    30.095] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[    30.095] (II) No input driver specified, ignoring this device.
[    30.095] (II) This device may have been added with another device file.
[    30.095] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[    30.096] (II) No input driver specified, ignoring this device.
[    30.096] (II) This device may have been added with another device file.
[    75.068] (II) modeset(0): EDID vendor "SEC", prod id 21569
[    75.068] (II) modeset(0): Printing DDC gathered Modelines:
[    75.068] (II) modeset(0): Modeline "1366x768"x0.0   71.56  1366 1414 1446 1510  768 770 775 789 +hsync -vsync (47.4 kHz eP)
[    75.284] (II) modeset(0): EDID vendor "SEC", prod id 21569
[    75.284] (II) modeset(0): Printing DDC gathered Modelines:
[    75.284] (II) modeset(0): Modeline "1366x768"x0.0   71.56  1366 1414 1446 1510  768 770 775 789 +hsync -vsync (47.4 kHz eP)
[    75.614] (II) modeset(0): EDID vendor "SEC", prod id 21569
[    75.614] (II) modeset(0): Printing DDC gathered Modelines:
[    75.614] (II) modeset(0): Modeline "1366x768"x0.0   71.56  1366 1414 1446 1510  768 770 775 789 +hsync -vsync (47.4 kHz eP)
[    75.833] (II) modeset(0): EDID vendor "SEC", prod id 21569
[    75.833] (II) modeset(0): Printing DDC gathered Modelines:
[    75.833] (II) modeset(0): Modeline "1366x768"x0.0   71.56  1366 1414 1446 1510  768 770 775 789 +hsync -vsync (47.4 kHz eP)
[    77.972] (II) modeset(0): EDID vendor "SEC", prod id 21569
[    77.972] (II) modeset(0): Printing DDC gathered Modelines:
[    77.972] (II) modeset(0): Modeline "1366x768"x0.0   71.56  1366 1414 1446 1510  768 770 775 789 +hsync -vsync (47.4 kHz eP)
[   108.045] (II) Axis 0x1 value 1174 is outside expected range [1242, 4894]
See https://wayland.freedesktop.org/libinput/doc/1.5.0//absolute_coordinate_ranges.html for details
[   557.423] (II) modeset(0): EDID vendor "SEC", prod id 21569
[   557.423] (II) modeset(0): Printing DDC gathered Modelines:
[   557.423] (II) modeset(0): Modeline "1366x768"x0.0   71.56  1366 1414 1446 1510  768 770 775 789 +hsync -vsync (47.4 kHz eP)
 


Sélection d'une partie :

[    27.655] (II) modeset(0): EDID for output DP-1
[    27.655] (II) modeset(0): Output LVDS-1 connected
[    27.655] (II) modeset(0): Output VGA-1 disconnected
[    27.655] (II) modeset(0): Output HDMI-1 connected
[    27.655] (II) modeset(0): Output DP-1 disconnected
[    27.655] (II) modeset(0): Using spanning desktop for initial modes
[    27.655] (II) modeset(0): Output LVDS-1 using initial mode 1366x768 +0+0
[    27.655] (II) modeset(0): Output HDMI-1 using initial mode 1920x1080 +1366+0
[    27.655] (II) modeset(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
 


je n'ai aucune idée de comment sont géré ces connecteurs vis a vis des 2 cartes vidéo (intel et nvidia )
quand tu aura finit la configuration logicielle de ton portable tu pourra peut etre me le dire

Pas de problème, mais il faudra me dire comment faire car je n'en ait aucune idées smile

nota: pour optimus prendre l installation avec "nouveau" du wiki , c'est quelques commandes a lancer et tester la 3D intel et nvidia

Ok, du coup doit-je désinstaller mate-optimus, https://packages.debian.org/stretch/mate-optimus, si oui doit-je le faire à partir de Gestionnaire de paquets Synaptic, et dans ce cas doit-je choisir "suppression" ou "suppression complète" ? Puis comment tester la 3D intel et nvidia ? c'est dans le tuto/wiki ? scratchhead.gif
merci.gif

Hors ligne

Pied de page des forums