Bonjour,
J'ai investi dans un câble "
Mini Displayport (mini DP) vers DVI-D" (me disant que comme cette connectique ne prend en compte que l'image, cela devrais peut-être fonctionner) et
cela fonctionne, mon second écran est reconnu et j'ai à présent un bureau étendu, ce qui est une bonne chose.
Cependant, si cela résous mon principale problème d'accès au second écran, ça ne résous pas le problème plus profond de la connexion HDMI, donc si vous le souhaitez et si cela vous semble utile je serait d'accord de poursuivre l'investigation.
Screen 0: minimum 320 x 200, current 3286 x 1080, maximum 8192 x 8192
LVDS-1 connected 1366x768+0+0 (normal left inverted right x axis y axis) 344mm x 194mm
1366x768 60.06*+
1360x768 59.80 59.96
1024x768 60.04 60.00
960x720 60.00
928x696 60.05
896x672 60.01
960x600 60.00
960x540 59.99
800x600 60.00 60.32 56.25
840x525 60.01 59.88
800x512 60.17
700x525 59.98
640x512 60.02
720x450 59.89
640x480 60.00 59.94
680x384 59.80 59.96
576x432 60.06
512x384 60.00
400x300 60.32 56.34
320x240 60.05
VGA-1 disconnected (normal left inverted right x axis y axis)
HDMI-1 connected 1920x1080+1366+0 (normal left inverted right x axis y axis) 531mm x 299mm
1920x1080 60.00*+
1600x1200 60.00
1680x1050 59.88
1280x1024 60.02
1440x900 59.90
1280x960 60.00
1152x720 59.97
1024x768 60.00
800x600 60.32 56.25
640x480 66.67 59.94
DP-1 disconnected (normal left inverted right x axis y axis)
<= De ce que je comprend avec cette commande c'est qu'il semblerais que le système confonde la connexion HDMI avec le DisplayPort (DP). Par ailleurs, et pour rappel, bien que la commande affiche VGA, mon PC portable ne dispose pas de cette prise.
Si ça peut servir :
Avec le cable HDMI vers HDMI =>
[ 26.630] (II) NOUVEAU(G0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 26.630] (II) NOUVEAU(G0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 26.630] (II) NOUVEAU(G0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 26.630] (II) NOUVEAU(G0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
[ 26.630] (II) NOUVEAU(G0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 26.691] (II) NOUVEAU(G0): EDID for output HDMI-1-2
[ 26.691] (II) NOUVEAU(G0): Manufacturer: IVM Model: 6113 Serial#: 2214
[ 26.691] (II) NOUVEAU(G0): Year: 2014 Week: 41
[ 26.691] (II) NOUVEAU(G0): EDID Version: 1.3
[ 26.691] (II) NOUVEAU(G0): Digital Display Input
[ 26.691] (II) NOUVEAU(G0): Max Image Size [cm]: horiz.: 53 vert.: 30
[ 26.691] (II) NOUVEAU(G0): Gamma: 2.20
[ 26.691] (II) NOUVEAU(G0): DPMS capabilities: Off
[ 26.691] (II) NOUVEAU(G0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 26.691] (II) NOUVEAU(G0): First detailed timing is preferred mode
[ 26.691] (II) NOUVEAU(G0): redX: 0.645 redY: 0.332 greenX: 0.315 greenY: 0.619
[ 26.691] (II) NOUVEAU(G0): blueX: 0.151 blueY: 0.065 whiteX: 0.313 whiteY: 0.329
[ 26.691] (II) NOUVEAU(G0): Supported established timings:
[ 26.691] (II) NOUVEAU(G0): 640x480@60Hz
[ 26.691] (II) NOUVEAU(G0): 640x480@67Hz
[ 26.691] (II) NOUVEAU(G0): 800x600@56Hz
[ 26.691] (II) NOUVEAU(G0): 800x600@60Hz
[ 26.691] (II) NOUVEAU(G0): 1024x768@60Hz
[ 26.691] (II) NOUVEAU(G0): Manufacturer's mask: 0
[ 26.691] (II) NOUVEAU(G0): Supported standard timings:
[ 26.691] (II) NOUVEAU(G0): #0: hsize: 1152 vsize 720 refresh: 60 vid: 113
[ 26.691] (II) NOUVEAU(G0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 26.691] (II) NOUVEAU(G0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 26.691] (II) NOUVEAU(G0): #3: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
[ 26.691] (II) NOUVEAU(G0): #4: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 26.691] (II) NOUVEAU(G0): #5: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 26.691] (II) NOUVEAU(G0): #6: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
[ 26.691] (II) NOUVEAU(G0): Supported detailed timing:
[ 26.691] (II) NOUVEAU(G0): clock: 148.5 MHz Image Size: 531 x 299 mm
[ 26.691] (II) NOUVEAU(G0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 26.691] (II) NOUVEAU(G0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 26.691] (II) NOUVEAU(G0): Serial No: 1127844122214
[ 26.691] (II) NOUVEAU(G0): Ranges: V min: 55 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
[ 26.691] (II) NOUVEAU(G0): Monitor name: PLE2483H
[ 26.691] (II) NOUVEAU(G0): Supported detailed timing:
[ 26.691] (II) NOUVEAU(G0): clock: 148.5 MHz Image Size: 531 x 299 mm
[ 26.691] (II) NOUVEAU(G0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 26.691] (II) NOUVEAU(G0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 26.691] (II) NOUVEAU(G0): Supported detailed timing:
[ 26.691] (II) NOUVEAU(G0): clock: 74.2 MHz Image Size: 531 x 299 mm
[ 26.691] (II) NOUVEAU(G0): h_active: 1920 h_sync: 2448 h_sync_end 2492 h_blank_end 2640 h_border: 0
[ 26.691] (II) NOUVEAU(G0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0
[ 26.691] (II) NOUVEAU(G0): Supported detailed timing:
[ 26.691] (II) NOUVEAU(G0): clock: 74.2 MHz Image Size: 531 x 299 mm
[ 26.691] (II) NOUVEAU(G0): h_active: 1280 h_sync: 1720 h_sync_end 1760 h_blank_end 1980 h_border: 0
[ 26.691] (II) NOUVEAU(G0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 26.691] (II) NOUVEAU(G0): Supported detailed timing:
[ 26.691] (II) NOUVEAU(G0): clock: 27.0 MHz Image Size: 531 x 299 mm
[ 26.691] (II) NOUVEAU(G0): h_active: 720 h_sync: 732 h_sync_end 796 h_blank_end 864 h_border: 0
[ 26.691] (II) NOUVEAU(G0): v_active: 576 v_sync: 581 v_sync_end 586 v_blanking: 625 v_border: 0
[ 26.691] (II) NOUVEAU(G0): Supported detailed timing:
[ 26.691] (II) NOUVEAU(G0): clock: 148.5 MHz Image Size: 531 x 299 mm
[ 26.691] (II) NOUVEAU(G0): h_active: 1920 h_sync: 2448 h_sync_end 2492 h_blank_end 2640 h_border: 0
[ 26.691] (II) NOUVEAU(G0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 26.691] (II) NOUVEAU(G0): Number of EDID sections to follow: 1
[ 26.692] (II) NOUVEAU(G0): EDID (in hex):
[ 26.692] (II) NOUVEAU(G0): 00ffffffffffff0026cd1361a6080000
[ 26.692] (II) NOUVEAU(G0): 2918010380351e782a0ef5a555509e26
[ 26.692] (II) NOUVEAU(G0): 105054330800710081408180a940b300
[ 26.692] (II) NOUVEAU(G0): 9500d1c00101023a801871382d40582c
[ 26.692] (II) NOUVEAU(G0): 4500132b2100001e000000ff00313132
[ 26.692] (II) NOUVEAU(G0): 37383434313232323134000000fd0037
[ 26.692] (II) NOUVEAU(G0): 4c1e5311000a202020202020000000fc
[ 26.692] (II) NOUVEAU(G0): 00504c4532343833480a20202020012d
[ 26.692] (II) NOUVEAU(G0): 020322f14f9005040302011112131406
[ 26.692] (II) NOUVEAU(G0): 0715161f230907018301000065030c00
[ 26.692] (II) NOUVEAU(G0): 1000023a801871382d40582c4500132b
[ 26.692] (II) NOUVEAU(G0): 2100001f011d80d0721c1620102c2580
[ 26.692] (II) NOUVEAU(G0): 132b2100009e011d00bc52d01e20b828
[ 26.692] (II) NOUVEAU(G0): 5540132b2100001e8c0ad09020403120
[ 26.692] (II) NOUVEAU(G0): 0c405500132b21000018023a80d07238
[ 26.692] (II) NOUVEAU(G0): 2d40102c4580132b2100001e000000d0
[ 26.692] (II) NOUVEAU(G0): Printing probed modes for output HDMI-1-2
[ 26.692] (II) NOUVEAU(G0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 26.692] (II) NOUVEAU(G0): Modeline "1920x1080"x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[ 26.692] (II) NOUVEAU(G0): Modeline "1920x1080"x59.9 148.35 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[ 26.692] (II) NOUVEAU(G0): Modeline "1920x1080i"x60.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[ 26.692] (II) NOUVEAU(G0): Modeline "1920x1080i"x50.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[ 26.692] (II) NOUVEAU(G0): Modeline "1920x1080i"x59.9 74.18 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.7 kHz e)
[ 26.692] (II) NOUVEAU(G0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 26.692] (II) NOUVEAU(G0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 26.692] (II) NOUVEAU(G0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 26.692] (II) NOUVEAU(G0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 26.692] (II) NOUVEAU(G0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 26.692] (II) NOUVEAU(G0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 26.692] (II) NOUVEAU(G0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 26.692] (II) NOUVEAU(G0): Modeline "1280x720"x59.9 74.18 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 26.692] (II) NOUVEAU(G0): Modeline "1152x720"x60.0 67.28 1152 1208 1328 1504 720 721 724 746 -hsync +vsync (44.7 kHz)
[ 26.692] (II) NOUVEAU(G0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 26.692] (II) NOUVEAU(G0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 26.692] (II) NOUVEAU(G0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 26.692] (II) NOUVEAU(G0): Modeline "720x576"x50.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 26.692] (II) NOUVEAU(G0): Modeline "720x480"x60.0 27.03 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 26.692] (II) NOUVEAU(G0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 26.692] (II) NOUVEAU(G0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 26.692] (II) NOUVEAU(G0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 26.692] (II) NOUVEAU(G0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 26.692] (II) NOUVEAU(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 26.692] (--) NOUVEAU(G0): Virtual size is 1024x768 (pitch 0)
[ 26.692] (**) NOUVEAU(G0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[ 26.692] (II) NOUVEAU(G0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 26.692] (**) NOUVEAU(G0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[ 26.692] (II) NOUVEAU(G0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 26.692] (**) NOUVEAU(G0): Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[ 26.692] (II) NOUVEAU(G0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 26.692] (**) NOUVEAU(G0): Driver mode "848x480": 33.8 MHz (scaled from 0.0 MHz), 31.0 kHz, 60.0 Hz
[ 26.692] (II) NOUVEAU(G0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
[ 26.692] (**) NOUVEAU(G0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 59.9 Hz
[ 26.692] (II) NOUVEAU(G0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 26.692] (==) NOUVEAU(G0): DPI set to (96, 96)
[ 26.692] (II) Loading sub module "fb"
[ 26.692] (II) LoadModule: "fb"
[ 26.692] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 26.692] (II) Module fb: vendor="X.Org Foundation"
[ 26.692] compiled for 1.18.4, module version = 1.0.0
[ 26.692] ABI class: X.Org ANSI C Emulation, version 0.4
[ 26.692] (II) Loading sub module "shadowfb"
[ 26.692] (II) LoadModule: "shadowfb"
[ 26.692] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 26.714] (II) Module shadowfb: vendor="X.Org Foundation"
[ 26.714] compiled for 1.18.4, module version = 1.0.0
[ 26.714] ABI class: X.Org ANSI C Emulation, version 0.4
[ 26.714] (II) UnloadModule: "fbdev"
[ 26.714] (II) Unloading fbdev
[ 26.714] (II) UnloadSubModule: "fbdevhw"
[ 26.714] (II) Unloading fbdevhw
[ 26.714] (II) UnloadModule: "vesa"
[ 26.714] (II) Unloading vesa
[ 26.714] (==) Depth 24 pixmap format is 32 bpp
[ 26.739] (II) NOUVEAU(G0): Channel setup complete.
[ 26.763] (II) NOUVEAU(G0): [COPY] async initialised.
[ 26.796] (II) NOUVEAU(G0): Hardware support for Present enabled
[ 26.796] (II) NOUVEAU(G0): [DRI2] Setup complete
[ 26.796] (II) NOUVEAU(G0): [DRI2] DRI driver: nouveau
[ 26.796] (II) NOUVEAU(G0): [DRI2] VDPAU driver: nouveau
[ 26.796] (II) Loading sub module "exa"
[ 26.796] (II) LoadModule: "exa"
[ 26.796] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 26.807] (II) Module exa: vendor="X.Org Foundation"
[ 26.807] compiled for 1.18.4, module version = 2.6.0
[ 26.807] ABI class: X.Org Video Driver, version 20.0
[ 26.807] (II) EXA(256): Driver allocated offscreen pixmaps
[ 26.807] (II) EXA(256): Driver registered support for the following operations:
[ 26.807] (II) Solid
[ 26.807] (II) Copy
[ 26.807] (II) Composite (RENDER acceleration)
[ 26.807] (II) UploadToScreen
[ 26.807] (II) DownloadFromScreen
[ 26.807] (==) NOUVEAU(G0): Backing store enabled
[ 26.807] (==) NOUVEAU(G0): Silken mouse enabled
[ 26.807] (II) NOUVEAU(G0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[ 26.807] (II) NOUVEAU(G0): [XvMC] Extension initialized.
[ 26.807] (==) NOUVEAU(G0): DPMS enabled
[ 26.807] (II) NOUVEAU(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 27.017] (==) modeset(0): Backing store enabled
[ 27.017] (==) modeset(0): Silken mouse enabled
[ 27.017] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 27.017] (==) modeset(0): DPMS enabled
[ 27.017] (II) modeset(0): [DRI2] Setup complete
[ 27.017] (II) modeset(0): [DRI2] DRI driver: i965
[ 27.017] (II) modeset(0): [DRI2] VDPAU driver: i965
[ 27.034] (--) RandR disabled
[ 27.055] (II) SELinux: Disabled on system
[ 27.113] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 27.113] (II) AIGLX: enabled GLX_ARB_create_context
[ 27.113] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 27.113] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[ 27.113] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 27.114] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 27.114] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 27.114] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 27.114] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[ 27.114] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 27.114] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 27.114] (II) AIGLX: Loaded and initialized i965
[ 27.114] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 27.116] (II) NOUVEAU(G0): NVEnterVT is called.
[ 27.234] (II) modeset(0): Damage tracking initialized
[ 27.234] (II) modeset(0): Setting screen physical size to 361 x 203
[ 28.097] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 28.097] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 28.097] (II) LoadModule: "libinput"
[ 28.097] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 28.382] (II) Module libinput: vendor="X.Org Foundation"
[ 28.382] compiled for 1.18.4, module version = 0.20.0
[ 28.382] Module class: X.Org XInput Driver
[ 28.382] ABI class: X.Org XInput driver, version 22.1
[ 28.382] (II) Using input driver 'libinput' for 'Power Button'
[ 28.382] (**) Power Button: always reports core events
[ 28.382] (**) Option "Device" "/dev/input/event5"
[ 28.382] (**) Option "_source" "server/udev"
[ 28.383] (II) input device 'Power Button', /dev/input/event5 is tagged by udev as: Keyboard
[ 28.383] (II) input device 'Power Button', /dev/input/event5 is a keyboard
[ 28.396] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event5"
[ 28.396] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 28.396] (**) Option "xkb_model" "pc105"
[ 28.396] (**) Option "xkb_layout" "fr"
[ 28.396] (**) Option "xkb_variant" "latin9"
[ 28.533] (II) input device 'Power Button', /dev/input/event5 is tagged by udev as: Keyboard
[ 28.533] (II) input device 'Power Button', /dev/input/event5 is a keyboard
[ 28.534] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[ 28.534] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 28.534] (II) Using input driver 'libinput' for 'Video Bus'
[ 28.534] (**) Video Bus: always reports core events
[ 28.534] (**) Option "Device" "/dev/input/event9"
[ 28.534] (**) Option "_source" "server/udev"
[ 28.535] (II) input device 'Video Bus', /dev/input/event9 is tagged by udev as: Keyboard
[ 28.535] (II) input device 'Video Bus', /dev/input/event9 is a keyboard
[ 28.544] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input14/event9"
[ 28.544] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 28.544] (**) Option "xkb_model" "pc105"
[ 28.544] (**) Option "xkb_layout" "fr"
[ 28.544] (**) Option "xkb_variant" "latin9"
[ 28.545] (II) input device 'Video Bus', /dev/input/event9 is tagged by udev as: Keyboard
[ 28.545] (II) input device 'Video Bus', /dev/input/event9 is a keyboard
[ 28.546] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[ 28.546] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 28.546] (II) Using input driver 'libinput' for 'Video Bus'
[ 28.546] (**) Video Bus: always reports core events
[ 28.546] (**) Option "Device" "/dev/input/event7"
[ 28.546] (**) Option "_source" "server/udev"
[ 28.546] (II) input device 'Video Bus', /dev/input/event7 is tagged by udev as: Keyboard
[ 28.546] (II) input device 'Video Bus', /dev/input/event7 is a keyboard
[ 28.556] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:32/LNXVIDEO:00/input/input12/event7"
[ 28.556] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 28.556] (**) Option "xkb_model" "pc105"
[ 28.556] (**) Option "xkb_layout" "fr"
[ 28.556] (**) Option "xkb_variant" "latin9"
[ 28.557] (II) input device 'Video Bus', /dev/input/event7 is tagged by udev as: Keyboard
[ 28.557] (II) input device 'Video Bus', /dev/input/event7 is a keyboard
[ 28.557] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 28.557] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 28.557] (II) Using input driver 'libinput' for 'Power Button'
[ 28.558] (**) Power Button: always reports core events
[ 28.558] (**) Option "Device" "/dev/input/event2"
[ 28.558] (**) Option "_source" "server/udev"
[ 28.558] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
[ 28.558] (II) input device 'Power Button', /dev/input/event2 is a keyboard
[ 28.568] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event2"
[ 28.568] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[ 28.568] (**) Option "xkb_model" "pc105"
[ 28.568] (**) Option "xkb_layout" "fr"
[ 28.568] (**) Option "xkb_variant" "latin9"
[ 28.569] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
[ 28.569] (II) input device 'Power Button', /dev/input/event2 is a keyboard
[ 28.569] (II) config/udev: Adding input device Lid Switch (/dev/input/event4)
[ 28.570] (II) No input driver specified, ignoring this device.
[ 28.570] (II) This device may have been added with another device file.
[ 28.570] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 28.570] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 28.570] (II) Using input driver 'libinput' for 'Sleep Button'
[ 28.570] (**) Sleep Button: always reports core events
[ 28.570] (**) Option "Device" "/dev/input/event3"
[ 28.570] (**) Option "_source" "server/udev"
[ 28.571] (II) input device 'Sleep Button', /dev/input/event3 is tagged by udev as: Keyboard
[ 28.571] (II) input device 'Sleep Button', /dev/input/event3 is a keyboard
[ 28.580] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4/event3"
[ 28.580] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[ 28.580] (**) Option "xkb_model" "pc105"
[ 28.580] (**) Option "xkb_layout" "fr"
[ 28.580] (**) Option "xkb_variant" "latin9"
[ 28.581] (II) input device 'Sleep Button', /dev/input/event3 is tagged by udev as: Keyboard
[ 28.581] (II) input device 'Sleep Button', /dev/input/event3 is a keyboard
[ 28.583] (II) config/udev: Adding input device Laptop_Integrated_Webcam_2HDM (/dev/input/event8)
[ 28.583] (**) Laptop_Integrated_Webcam_2HDM: Applying InputClass "libinput keyboard catchall"
[ 28.583] (II) Using input driver 'libinput' for 'Laptop_Integrated_Webcam_2HDM'
[ 28.583] (**) Laptop_Integrated_Webcam_2HDM: always reports core events
[ 28.583] (**) Option "Device" "/dev/input/event8"
[ 28.583] (**) Option "_source" "server/udev"
[ 28.583] (II) input device 'Laptop_Integrated_Webcam_2HDM', /dev/input/event8 is tagged by udev as: Keyboard
[ 28.583] (II) input device 'Laptop_Integrated_Webcam_2HDM', /dev/input/event8 is a keyboard
[ 28.608] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input13/event8"
[ 28.608] (II) XINPUT: Adding extended input device "Laptop_Integrated_Webcam_2HDM" (type: KEYBOARD, id 11)
[ 28.608] (**) Option "xkb_model" "pc105"
[ 28.608] (**) Option "xkb_layout" "fr"
[ 28.608] (**) Option "xkb_variant" "latin9"
[ 28.609] (II) input device 'Laptop_Integrated_Webcam_2HDM', /dev/input/event8 is tagged by udev as: Keyboard
[ 28.609] (II) input device 'Laptop_Integrated_Webcam_2HDM', /dev/input/event8 is a keyboard
[ 28.610] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event12)
[ 28.610] (II) No input driver specified, ignoring this device.
[ 28.610] (II) This device may have been added with another device file.
[ 28.611] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event13)
[ 28.611] (II) No input driver specified, ignoring this device.
[ 28.611] (II) This device may have been added with another device file.
[ 28.612] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event14)
[ 28.612] (II) No input driver specified, ignoring this device.
[ 28.612] (II) This device may have been added with another device file.
[ 28.612] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event10)
[ 28.612] (II) No input driver specified, ignoring this device.
[ 28.612] (II) This device may have been added with another device file.
[ 28.613] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event11)
[ 28.613] (II) No input driver specified, ignoring this device.
[ 28.613] (II) This device may have been added with another device file.
[ 28.614] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 28.614] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 28.614] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 28.614] (**) AT Translated Set 2 keyboard: always reports core events
[ 28.614] (**) Option "Device" "/dev/input/event0"
[ 28.614] (**) Option "_source" "server/udev"
[ 28.615] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[ 28.615] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[ 28.636] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 28.636] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[ 28.636] (**) Option "xkb_model" "pc105"
[ 28.636] (**) Option "xkb_layout" "fr"
[ 28.636] (**) Option "xkb_variant" "latin9"
[ 28.637] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[ 28.637] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[ 28.638] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event1)
[ 28.638] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[ 28.638] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad'
[ 28.638] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 28.638] (**) Option "Device" "/dev/input/event1"
[ 28.639] (**) Option "_source" "server/udev"
[ 28.639] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event1 is tagged by udev as: Touchpad
[ 28.639] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event1 is a touchpad
[ 28.664] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input2/event1"
[ 28.664] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[ 28.665] (**) Option "AccelerationScheme" "none"
[ 28.665] (**) SynPS/2 Synaptics TouchPad: (accel) selected scheme none/0
[ 28.665] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 28.665] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 28.665] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event1 is tagged by udev as: Touchpad
[ 28.666] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event1 is a touchpad
[ 28.666] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 28.666] (II) No input driver specified, ignoring this device.
[ 28.666] (II) This device may have been added with another device file.
[ 28.667] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 28.667] (II) No input driver specified, ignoring this device.
[ 28.667] (II) This device may have been added with another device file.
[ 45.805] (II) modeset(0): EDID vendor "SEC", prod id 21569
[ 45.806] (II) modeset(0): Printing DDC gathered Modelines:
[ 45.806] (II) modeset(0): Modeline "1366x768"x0.0 71.56 1366 1414 1446 1510 768 770 775 789 +hsync -vsync (47.4 kHz eP)
[ 46.057] (II) modeset(0): EDID vendor "SEC", prod id 21569
[ 46.057] (II) modeset(0): Printing DDC gathered Modelines:
[ 46.057] (II) modeset(0): Modeline "1366x768"x0.0 71.56 1366 1414 1446 1510 768 770 775 789 +hsync -vsync (47.4 kHz eP)
[ 46.323] (II) modeset(0): EDID vendor "SEC", prod id 21569
[ 46.323] (II) modeset(0): Printing DDC gathered Modelines:
[ 46.323] (II) modeset(0): Modeline "1366x768"x0.0 71.56 1366 1414 1446 1510 768 770 775 789 +hsync -vsync (47.4 kHz eP)
[ 46.576] (II) modeset(0): EDID vendor "SEC", prod id 21569
[ 46.576] (II) modeset(0): Printing DDC gathered Modelines:
[ 46.576] (II) modeset(0): Modeline "1366x768"x0.0 71.56 1366 1414 1446 1510 768 770 775 789 +hsync -vsync (47.4 kHz eP)
[ 49.113] (II) modeset(0): EDID vendor "SEC", prod id 21569
[ 49.113] (II) modeset(0): Printing DDC gathered Modelines:
[ 49.113] (II) modeset(0): Modeline "1366x768"x0.0 71.56 1366 1414 1446 1510 768 770 775 789 +hsync -vsync (47.4 kHz eP)
[ 54.058] (II) modeset(0): EDID vendor "SEC", prod id 21569
[ 54.058] (II) modeset(0): Printing DDC gathered Modelines:
[ 54.058] (II) modeset(0): Modeline "1366x768"x0.0 71.56 1366 1414 1446 1510 768 770 775 789 +hsync -vsync (47.4 kHz eP)
[ 54.419] (II) modeset(0): EDID vendor "SEC", prod id 21569
[ 54.420] (II) modeset(0): Printing DDC gathered Modelines:
[ 54.420] (II) modeset(0): Modeline "1366x768"x0.0 71.56 1366 1414 1446 1510 768 770 775 789 +hsync -vsync (47.4 kHz eP)
[ 62.901] (II) Axis 0x1 value 1152 is outside expected range [1242, 4894]
See https://wayland.freedesktop.org/libinput/doc/1.5.0//absolute_coordinate_ranges.html for details
[ 64.353] (II) modeset(0): EDID vendor "SEC", prod id 21569
[ 64.353] (II) modeset(0): Printing DDC gathered Modelines:
[ 64.353] (II) modeset(0): Modeline "1366x768"x0.0 71.56 1366 1414 1446 1510 768 770 775 789 +hsync -vsync (47.4 kHz eP)
[ 64.716] (II) modeset(0): EDID vendor "SEC", prod id 21569
[ 64.716] (II) modeset(0): Printing DDC gathered Modelines:
[ 64.716] (II) modeset(0): Modeline "1366x768"x0.0 71.56 1366 1414 1446 1510 768 770 775 789 +hsync -vsync (47.4 kHz eP)
[ 74.652] (II) modeset(0): EDID vendor "SEC", prod id 21569
[ 74.652] (II) modeset(0): Printing DDC gathered Modelines:
[ 74.652] (II) modeset(0): Modeline "1366x768"x0.0 71.56 1366 1414 1446 1510 768 770 775 789 +hsync -vsync (47.4 kHz eP)
[ 75.013] (II) modeset(0): EDID vendor "SEC", prod id 21569
[ 75.013] (II) modeset(0): Printing DDC gathered Modelines:
[ 75.013] (II) modeset(0): Modeline "1366x768"x0.0 71.56 1366 1414 1446 1510 768 770 775 789 +hsync -vsync (47.4 kHz eP)
[ 84.951] (II) modeset(0): EDID vendor "SEC", prod id 21569
[ 84.952] (II) modeset(0): Printing DDC gathered Modelines:
[ 84.952] (II) modeset(0): Modeline "1366x768"x0.0 71.56 1366 1414 1446 1510 768 770 775 789 +hsync -vsync (47.4 kHz eP)
[ 85.310] (II) modeset(0): EDID vendor "SEC", prod id 21569
[ 85.310] (II) modeset(0): Printing DDC gathered Modelines:
[ 85.310] (II) modeset(0): Modeline "1366x768"x0.0 71.56 1366 1414 1446 1510 768 770 775 789 +hsync -vsync (47.4 kHz eP)
Avec le cable DP vers DVI-D =>
[ 26.107] (II) modeset(0): Modeline "1366x768"x60.1 71.56 1366 1414 1446 1510 768 770 775 789 +hsync -vsync (47.4 kHz eP)
[ 26.107] (II) modeset(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz d)
[ 26.107] (II) modeset(0): Modeline "1360x768"x60.0 72.00 1360 1408 1440 1520 768 771 781 790 +hsync -vsync (47.4 kHz d)
[ 26.107] (II) modeset(0): Modeline "1024x768"x120.1 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[ 26.107] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 26.107] (II) modeset(0): Modeline "960x720"x120.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[ 26.107] (II) modeset(0): Modeline "928x696"x120.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[ 26.107] (II) modeset(0): Modeline "896x672"x120.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[ 26.107] (II) modeset(0): Modeline "960x600"x120.0 77.00 960 984 1000 1040 600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[ 26.107] (II) modeset(0): Modeline "960x540"x120.0 69.25 960 984 1000 1040 540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[ 26.107] (II) modeset(0): Modeline "800x600"x120.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[ 26.107] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 26.107] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 26.107] (II) modeset(0): Modeline "840x525"x120.0 73.12 840 892 980 1120 525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[ 26.107] (II) modeset(0): Modeline "840x525"x119.8 59.50 840 864 880 920 525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[ 26.107] (II) modeset(0): Modeline "800x512"x120.3 51.56 800 800 828 832 512 512 514 515 doublescan +hsync +vsync (62.0 kHz d)
[ 26.107] (II) modeset(0): Modeline "700x525"x120.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[ 26.107] (II) modeset(0): Modeline "640x512"x120.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[ 26.107] (II) modeset(0): Modeline "720x450"x119.8 53.25 720 760 836 952 450 451 454 467 doublescan -hsync +vsync (55.9 kHz d)
[ 26.107] (II) modeset(0): Modeline "640x480"x120.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[ 26.107] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 26.107] (II) modeset(0): Modeline "680x384"x119.6 42.38 680 716 784 888 384 385 390 399 doublescan -hsync +vsync (47.7 kHz d)
[ 26.107] (II) modeset(0): Modeline "680x384"x119.9 36.00 680 704 720 760 384 385 390 395 doublescan +hsync -vsync (47.4 kHz d)
[ 26.107] (II) modeset(0): Modeline "576x432"x120.1 40.81 576 608 668 760 432 432 434 447 doublescan -hsync +vsync (53.7 kHz d)
[ 26.107] (II) modeset(0): Modeline "512x384"x120.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 26.107] (II) modeset(0): Modeline "400x300"x120.6 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[ 26.107] (II) modeset(0): Modeline "400x300"x112.7 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[ 26.107] (II) modeset(0): Modeline "320x240"x120.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 26.224] (II) modeset(0): EDID for output VGA-1
[ 26.240] (II) modeset(0): EDID for output HDMI-1
[ 26.240] (II) modeset(0): Manufacturer: IVM Model: 6113 Serial#: 2214
[ 26.240] (II) modeset(0): Year: 2014 Week: 41
[ 26.240] (II) modeset(0): EDID Version: 1.3
[ 26.240] (II) modeset(0): Digital Display Input
[ 26.240] (II) modeset(0): Max Image Size [cm]: horiz.: 53 vert.: 30
[ 26.240] (II) modeset(0): Gamma: 2.20
[ 26.240] (II) modeset(0): DPMS capabilities: Off
[ 26.240] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 26.240] (II) modeset(0): First detailed timing is preferred mode
[ 26.240] (II) modeset(0): redX: 0.645 redY: 0.332 greenX: 0.315 greenY: 0.619
[ 26.240] (II) modeset(0): blueX: 0.151 blueY: 0.065 whiteX: 0.313 whiteY: 0.329
[ 26.240] (II) modeset(0): Supported established timings:
[ 26.240] (II) modeset(0): 640x480@60Hz
[ 26.240] (II) modeset(0): 640x480@67Hz
[ 26.240] (II) modeset(0): 800x600@56Hz
[ 26.240] (II) modeset(0): 800x600@60Hz
[ 26.240] (II) modeset(0): 1024x768@60Hz
[ 26.240] (II) modeset(0): Manufacturer's mask: 0
[ 26.240] (II) modeset(0): Supported standard timings:
[ 26.240] (II) modeset(0): #0: hsize: 1152 vsize 720 refresh: 60 vid: 113
[ 26.240] (II) modeset(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 26.240] (II) modeset(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 26.240] (II) modeset(0): #3: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
[ 26.240] (II) modeset(0): #4: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 26.240] (II) modeset(0): #5: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 26.240] (II) modeset(0): #6: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
[ 26.240] (II) modeset(0): Supported detailed timing:
[ 26.240] (II) modeset(0): clock: 148.5 MHz Image Size: 531 x 299 mm
[ 26.240] (II) modeset(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 26.240] (II) modeset(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 26.241] (II) modeset(0): Serial No: 1127844122214
[ 26.241] (II) modeset(0): Ranges: V min: 55 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
[ 26.241] (II) modeset(0): Monitor name: PLE2483H
[ 26.241] (II) modeset(0): EDID (in hex):
[ 26.241] (II) modeset(0): 00ffffffffffff0026cd1361a6080000
[ 26.241] (II) modeset(0): 2918010380351e782a0ef5a555509e26
[ 26.241] (II) modeset(0): 105054330800710081408180a940b300
[ 26.241] (II) modeset(0): 9500d1c00101023a801871382d40582c
[ 26.241] (II) modeset(0): 4500132b2100001e000000ff00313132
[ 26.241] (II) modeset(0): 37383434313232323134000000fd0037
[ 26.241] (II) modeset(0): 4c1e5311000a202020202020000000fc
[ 26.241] (II) modeset(0): 00504c4532343833480a20202020002e
[ 26.241] (II) modeset(0): Printing probed modes for output HDMI-1
[ 26.241] (II) modeset(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 26.241] (II) modeset(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 26.241] (II) modeset(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 26.241] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 26.241] (II) modeset(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 26.241] (II) modeset(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 26.241] (II) modeset(0): Modeline "1152x720"x60.0 67.28 1152 1208 1328 1504 720 721 724 746 -hsync +vsync (44.7 kHz)
[ 26.241] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 26.241] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 26.241] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 26.241] (II) modeset(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 26.241] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 26.320] (II) modeset(0): EDID for output DP-1
[ 26.320] (II) modeset(0): Output LVDS-1 connected
[ 26.320] (II) modeset(0): Output VGA-1 disconnected
[ 26.320] (II) modeset(0): Output HDMI-1 connected
[ 26.320] (II) modeset(0): Output DP-1 disconnected
[ 26.320] (II) modeset(0): Using spanning desktop for initial modes
[ 26.320] (II) modeset(0): Output LVDS-1 using initial mode 1366x768 +0+0
[ 26.320] (II) modeset(0): Output HDMI-1 using initial mode 1920x1080 +1366+0
[ 26.320] (II) modeset(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 26.321] (==) modeset(0): DPI set to (96, 96)
[ 26.321] (II) Loading sub module "fb"
[ 26.321] (II) LoadModule: "fb"
[ 26.321] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 26.331] (II) Module fb: vendor="X.Org Foundation"
[ 26.331] compiled for 1.18.4, module version = 1.0.0
[ 26.331] ABI class: X.Org ANSI C Emulation, version 0.4
[ 26.331] (II) Loading sub module "dri2"
[ 26.331] (II) LoadModule: "dri2"
[ 26.331] (II) Module "dri2" already built-in
[ 26.331] (--) NOUVEAU(G0): Chipset: "NVIDIA NVC1"
[ 26.331] (==) NOUVEAU(G0): Depth 24, (--) framebuffer bpp 32
[ 26.331] (==) NOUVEAU(G0): RGB weight 888
[ 26.331] (==) NOUVEAU(G0): Default visual is TrueColor
[ 26.331] (==) NOUVEAU(G0): Using HW cursor
[ 26.331] (==) NOUVEAU(G0): Allowed maximum DRI level 2.
[ 26.331] (==) NOUVEAU(G0): GLX sync to VBlank enabled.
[ 26.331] (==) NOUVEAU(G0): Page flipping enabled
[ 26.331] (==) NOUVEAU(G0): Swap limit set to 1 [Max allowed 2]
[ 26.331] (==) NOUVEAU(G0): Page flipping synced to vblank by kernel.
[ 26.331] (II) NOUVEAU(G0): Initializing outputs ...
[ 26.342] (II) NOUVEAU(G0): Output VGA-1-2 has no monitor section
[ 26.343] (II) NOUVEAU(G0): Output HDMI-1-2 has no monitor section
[ 26.343] (II) NOUVEAU(G0): 2 crtcs needed for screen.
[ 26.347] (II) NOUVEAU(G0): Allocated crtc nr. 0 to this screen.
[ 26.347] (II) NOUVEAU(G0): Allocated crtc nr. 1 to this screen.
[ 26.357] (II) NOUVEAU(G0): EDID for output VGA-1-2
[ 26.357] (II) NOUVEAU(G0): Printing probed modes for output VGA-1-2
[ 26.357] (II) NOUVEAU(G0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 26.357] (II) NOUVEAU(G0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 26.357] (II) NOUVEAU(G0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 26.357] (II) NOUVEAU(G0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
[ 26.357] (II) NOUVEAU(G0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 26.358] (II) NOUVEAU(G0): EDID for output HDMI-1-2
[ 26.358] (II) NOUVEAU(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 26.358] (--) NOUVEAU(G0): Virtual size is 1024x768 (pitch 0)
[ 26.358] (**) NOUVEAU(G0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[ 26.358] (II) NOUVEAU(G0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 26.358] (**) NOUVEAU(G0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[ 26.358] (II) NOUVEAU(G0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 26.358] (**) NOUVEAU(G0): Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[ 26.359] (II) NOUVEAU(G0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 26.359] (**) NOUVEAU(G0): Driver mode "848x480": 33.8 MHz (scaled from 0.0 MHz), 31.0 kHz, 60.0 Hz
[ 26.359] (II) NOUVEAU(G0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
[ 26.359] (**) NOUVEAU(G0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 59.9 Hz
[ 26.359] (II) NOUVEAU(G0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 26.359] (==) NOUVEAU(G0): DPI set to (96, 96)
[ 26.359] (II) Loading sub module "fb"
[ 26.359] (II) LoadModule: "fb"
[ 26.359] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 26.359] (II) Module fb: vendor="X.Org Foundation"
[ 26.359] compiled for 1.18.4, module version = 1.0.0
[ 26.359] ABI class: X.Org ANSI C Emulation, version 0.4
[ 26.359] (II) Loading sub module "shadowfb"
[ 26.359] (II) LoadModule: "shadowfb"
[ 26.359] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 26.378] (II) Module shadowfb: vendor="X.Org Foundation"
[ 26.378] compiled for 1.18.4, module version = 1.0.0
[ 26.378] ABI class: X.Org ANSI C Emulation, version 0.4
[ 26.378] (II) UnloadModule: "fbdev"
[ 26.378] (II) Unloading fbdev
[ 26.378] (II) UnloadSubModule: "fbdevhw"
[ 26.378] (II) Unloading fbdevhw
[ 26.378] (II) UnloadModule: "vesa"
[ 26.378] (II) Unloading vesa
[ 26.378] (==) Depth 24 pixmap format is 32 bpp
[ 26.405] (II) NOUVEAU(G0): Channel setup complete.
[ 26.430] (II) NOUVEAU(G0): [COPY] async initialised.
[ 26.468] (II) NOUVEAU(G0): Hardware support for Present enabled
[ 26.468] (II) NOUVEAU(G0): [DRI2] Setup complete
[ 26.468] (II) NOUVEAU(G0): [DRI2] DRI driver: nouveau
[ 26.468] (II) NOUVEAU(G0): [DRI2] VDPAU driver: nouveau
[ 26.468] (II) Loading sub module "exa"
[ 26.468] (II) LoadModule: "exa"
[ 26.468] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 26.478] (II) Module exa: vendor="X.Org Foundation"
[ 26.479] compiled for 1.18.4, module version = 2.6.0
[ 26.479] ABI class: X.Org Video Driver, version 20.0
[ 26.479] (II) EXA(256): Driver allocated offscreen pixmaps
[ 26.479] (II) EXA(256): Driver registered support for the following operations:
[ 26.479] (II) Solid
[ 26.479] (II) Copy
[ 26.479] (II) Composite (RENDER acceleration)
[ 26.479] (II) UploadToScreen
[ 26.479] (II) DownloadFromScreen
[ 26.479] (==) NOUVEAU(G0): Backing store enabled
[ 26.479] (==) NOUVEAU(G0): Silken mouse enabled
[ 26.479] (II) NOUVEAU(G0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[ 26.479] (II) NOUVEAU(G0): [XvMC] Extension initialized.
[ 26.479] (==) NOUVEAU(G0): DPMS enabled
[ 26.479] (II) NOUVEAU(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 26.694] (==) modeset(0): Backing store enabled
[ 26.694] (==) modeset(0): Silken mouse enabled
[ 26.694] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 26.779] (==) modeset(0): DPMS enabled
[ 26.780] (II) modeset(0): [DRI2] Setup complete
[ 26.780] (II) modeset(0): [DRI2] DRI driver: i965
[ 26.780] (II) modeset(0): [DRI2] VDPAU driver: i965
[ 26.813] (--) RandR disabled
[ 26.854] (II) SELinux: Disabled on system
[ 26.894] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 26.894] (II) AIGLX: enabled GLX_ARB_create_context
[ 26.894] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 26.894] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[ 26.894] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 26.894] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 26.894] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 26.894] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 26.894] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[ 26.894] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 26.894] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 26.894] (II) AIGLX: Loaded and initialized i965
[ 26.894] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 26.896] (II) NOUVEAU(G0): NVEnterVT is called.
[ 26.922] (II) modeset(0): Damage tracking initialized
[ 26.922] (II) modeset(0): Setting screen physical size to 869 x 285
[ 28.041] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 28.041] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 28.041] (II) LoadModule: "libinput"
[ 28.041] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 28.231] (II) Module libinput: vendor="X.Org Foundation"
[ 28.232] compiled for 1.18.4, module version = 0.20.0
[ 28.232] Module class: X.Org XInput Driver
[ 28.232] ABI class: X.Org XInput driver, version 22.1
[ 28.232] (II) Using input driver 'libinput' for 'Power Button'
[ 28.232] (**) Power Button: always reports core events
[ 28.232] (**) Option "Device" "/dev/input/event5"
[ 28.232] (**) Option "_source" "server/udev"
[ 28.233] (II) input device 'Power Button', /dev/input/event5 is tagged by udev as: Keyboard
[ 28.233] (II) input device 'Power Button', /dev/input/event5 is a keyboard
[ 28.248] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event5"
[ 28.248] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 28.248] (**) Option "xkb_model" "pc105"
[ 28.248] (**) Option "xkb_layout" "fr"
[ 28.248] (**) Option "xkb_variant" "latin9"
[ 28.479] (II) input device 'Power Button', /dev/input/event5 is tagged by udev as: Keyboard
[ 28.479] (II) input device 'Power Button', /dev/input/event5 is a keyboard
[ 28.480] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[ 28.480] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 28.480] (II) Using input driver 'libinput' for 'Video Bus'
[ 28.480] (**) Video Bus: always reports core events
[ 28.480] (**) Option "Device" "/dev/input/event8"
[ 28.480] (**) Option "_source" "server/udev"
[ 28.481] (II) input device 'Video Bus', /dev/input/event8 is tagged by udev as: Keyboard
[ 28.481] (II) input device 'Video Bus', /dev/input/event8 is a keyboard
[ 28.492] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input13/event8"
[ 28.492] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 28.492] (**) Option "xkb_model" "pc105"
[ 28.492] (**) Option "xkb_layout" "fr"
[ 28.492] (**) Option "xkb_variant" "latin9"
[ 28.493] (II) input device 'Video Bus', /dev/input/event8 is tagged by udev as: Keyboard
[ 28.493] (II) input device 'Video Bus', /dev/input/event8 is a keyboard
[ 28.493] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[ 28.494] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 28.494] (II) Using input driver 'libinput' for 'Video Bus'
[ 28.494] (**) Video Bus: always reports core events
[ 28.494] (**) Option "Device" "/dev/input/event7"
[ 28.494] (**) Option "_source" "server/udev"
[ 28.494] (II) input device 'Video Bus', /dev/input/event7 is tagged by udev as: Keyboard
[ 28.494] (II) input device 'Video Bus', /dev/input/event7 is a keyboard
[ 28.508] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:32/LNXVIDEO:00/input/input12/event7"
[ 28.508] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 28.508] (**) Option "xkb_model" "pc105"
[ 28.508] (**) Option "xkb_layout" "fr"
[ 28.508] (**) Option "xkb_variant" "latin9"
[ 28.509] (II) input device 'Video Bus', /dev/input/event7 is tagged by udev as: Keyboard
[ 28.509] (II) input device 'Video Bus', /dev/input/event7 is a keyboard
[ 28.509] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 28.509] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 28.509] (II) Using input driver 'libinput' for 'Power Button'
[ 28.509] (**) Power Button: always reports core events
[ 28.509] (**) Option "Device" "/dev/input/event2"
[ 28.510] (**) Option "_source" "server/udev"
[ 28.510] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
[ 28.510] (II) input device 'Power Button', /dev/input/event2 is a keyboard
[ 28.520] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event2"
[ 28.520] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[ 28.520] (**) Option "xkb_model" "pc105"
[ 28.520] (**) Option "xkb_layout" "fr"
[ 28.520] (**) Option "xkb_variant" "latin9"
[ 28.521] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
[ 28.521] (II) input device 'Power Button', /dev/input/event2 is a keyboard
[ 28.522] (II) config/udev: Adding input device Lid Switch (/dev/input/event4)
[ 28.522] (II) No input driver specified, ignoring this device.
[ 28.522] (II) This device may have been added with another device file.
[ 28.523] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 28.523] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 28.523] (II) Using input driver 'libinput' for 'Sleep Button'
[ 28.523] (**) Sleep Button: always reports core events
[ 28.523] (**) Option "Device" "/dev/input/event3"
[ 28.523] (**) Option "_source" "server/udev"
[ 28.523] (II) input device 'Sleep Button', /dev/input/event3 is tagged by udev as: Keyboard
[ 28.523] (II) input device 'Sleep Button', /dev/input/event3 is a keyboard
[ 28.536] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4/event3"
[ 28.536] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[ 28.536] (**) Option "xkb_model" "pc105"
[ 28.536] (**) Option "xkb_layout" "fr"
[ 28.536] (**) Option "xkb_variant" "latin9"
[ 28.537] (II) input device 'Sleep Button', /dev/input/event3 is tagged by udev as: Keyboard
[ 28.537] (II) input device 'Sleep Button', /dev/input/event3 is a keyboard
[ 28.539] (II) config/udev: Adding input device Laptop_Integrated_Webcam_2HDM (/dev/input/event9)
[ 28.539] (**) Laptop_Integrated_Webcam_2HDM: Applying InputClass "libinput keyboard catchall"
[ 28.539] (II) Using input driver 'libinput' for 'Laptop_Integrated_Webcam_2HDM'
[ 28.539] (**) Laptop_Integrated_Webcam_2HDM: always reports core events
[ 28.539] (**) Option "Device" "/dev/input/event9"
[ 28.539] (**) Option "_source" "server/udev"
[ 28.540] (II) input device 'Laptop_Integrated_Webcam_2HDM', /dev/input/event9 is tagged by udev as: Keyboard
[ 28.540] (II) input device 'Laptop_Integrated_Webcam_2HDM', /dev/input/event9 is a keyboard
[ 28.568] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input14/event9"
[ 28.568] (II) XINPUT: Adding extended input device "Laptop_Integrated_Webcam_2HDM" (type: KEYBOARD, id 11)
[ 28.568] (**) Option "xkb_model" "pc105"
[ 28.568] (**) Option "xkb_layout" "fr"
[ 28.568] (**) Option "xkb_variant" "latin9"
[ 28.569] (II) input device 'Laptop_Integrated_Webcam_2HDM', /dev/input/event9 is tagged by udev as: Keyboard
[ 28.569] (II) input device 'Laptop_Integrated_Webcam_2HDM', /dev/input/event9 is a keyboard
[ 28.570] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event12)
[ 28.570] (II) No input driver specified, ignoring this device.
[ 28.570] (II) This device may have been added with another device file.
[ 28.570] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event13)
[ 28.570] (II) No input driver specified, ignoring this device.
[ 28.570] (II) This device may have been added with another device file.
[ 28.571] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event14)
[ 28.571] (II) No input driver specified, ignoring this device.
[ 28.571] (II) This device may have been added with another device file.
[ 28.571] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event10)
[ 28.572] (II) No input driver specified, ignoring this device.
[ 28.572] (II) This device may have been added with another device file.
[ 28.572] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event11)
[ 28.572] (II) No input driver specified, ignoring this device.
[ 28.572] (II) This device may have been added with another device file.
[ 28.573] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 28.573] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 28.573] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 28.574] (**) AT Translated Set 2 keyboard: always reports core events
[ 28.574] (**) Option "Device" "/dev/input/event0"
[ 28.574] (**) Option "_source" "server/udev"
[ 28.574] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[ 28.574] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[ 28.604] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 28.604] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[ 28.604] (**) Option "xkb_model" "pc105"
[ 28.604] (**) Option "xkb_layout" "fr"
[ 28.604] (**) Option "xkb_variant" "latin9"
[ 28.605] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[ 28.605] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[ 28.606] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event1)
[ 28.606] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[ 28.606] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad'
[ 28.606] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 28.606] (**) Option "Device" "/dev/input/event1"
[ 28.606] (**) Option "_source" "server/udev"
[ 28.606] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event1 is tagged by udev as: Touchpad
[ 28.606] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event1 is a touchpad
[ 28.632] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input2/event1"
[ 28.632] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[ 28.633] (**) Option "AccelerationScheme" "none"
[ 28.633] (**) SynPS/2 Synaptics TouchPad: (accel) selected scheme none/0
[ 28.633] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 28.633] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 28.634] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event1 is tagged by udev as: Touchpad
[ 28.634] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event1 is a touchpad
[ 28.634] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 28.634] (II) No input driver specified, ignoring this device.
[ 28.634] (II) This device may have been added with another device file.
[ 28.635] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 28.635] (II) No input driver specified, ignoring this device.
[ 28.635] (II) This device may have been added with another device file.
[ 49.496] (II) modeset(0): EDID vendor "SEC", prod id 21569
[ 49.496] (II) modeset(0): Printing DDC gathered Modelines:
[ 49.496] (II) modeset(0): Modeline "1366x768"x0.0 71.56 1366 1414 1446 1510 768 770 775 789 +hsync -vsync (47.4 kHz eP)
[ 49.711] (II) modeset(0): EDID vendor "SEC", prod id 21569
[ 49.711] (II) modeset(0): Printing DDC gathered Modelines:
[ 49.711] (II) modeset(0): Modeline "1366x768"x0.0 71.56 1366 1414 1446 1510 768 770 775 789 +hsync -vsync (47.4 kHz eP)
[ 50.042] (II) modeset(0): EDID vendor "SEC", prod id 21569
[ 50.042] (II) modeset(0): Printing DDC gathered Modelines:
[ 50.042] (II) modeset(0): Modeline "1366x768"x0.0 71.56 1366 1414 1446 1510 768 770 775 789 +hsync -vsync (47.4 kHz eP)
[ 50.257] (II) modeset(0): EDID vendor "SEC", prod id 21569
[ 50.257] (II) modeset(0): Printing DDC gathered Modelines:
[ 50.257] (II) modeset(0): Modeline "1366x768"x0.0 71.56 1366 1414 1446 1510 768 770 775 789 +hsync -vsync (47.4 kHz eP)
[ 52.409] (II) modeset(0): EDID vendor "SEC", prod id 21569
[ 52.409] (II) modeset(0): Printing DDC gathered Modelines:
[ 52.409] (II) modeset(0): Modeline "1366x768"x0.0 71.56 1366 1414 1446 1510 768 770 775 789 +hsync -vsync (47.4 kHz eP)
[ 64.350] (II) Axis 0x1 value 1213 is outside expected range [1242, 4894]
See https://wayland.freedesktop.org/libinput/doc/1.5.0//absolute_coordinate_ranges.html for details
anonyme a écrit :pour faire court (et hélas je ne peut le vérifier ) , seul la carte intel compte (en 2D affichage du bureau ) , la carte nvidia ne vient qu en renfort pour la 3D (demande de plus de puissance ).
Si c'est intéressant, est-il possible de vérifier cela maintenant que le second écran est fonctionnel ?
Enfin pour ce qui est de https://ubuntuforums.org/showthread.php?t=2115704 ,j'obtiens
nano/etc/pulse/default.pa
bash: nano/etc/pulse/default.pa: Aucun fichier ou dossier de ce type
Ps : quelques complément d'informations
- Pour HandyLinux, avec le câble DP vers DVI-D le second écran est reconnu en clone, en installant ARandR il est alors possible d'avoir un bureau étendu.
- Pour le Live-Debian-Jessie-Mate, le second écran est également reconnu en clone et il faut se rendre dans les paramètre d'écran pour en faire un bureau étendu.
Indépendamment du second écran, lorsque je lance l'USB Live-Debian-Jessie-Mate, au moment du chargement il y a un message d'erreur "unexpectedly disconnected from boot status deamon" puis plus loin "[FAILED] Failed to start Show Plymouth Boot Screen. See 'systemctl status plymouth-start.service' for dedails." Ne sachant pas s'il peut y avoir un rapport je vous le notifie.
Dernière modification par Strato (16-11-2016 19:43:11)