Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#1 26-11-2016 13:40:26

ratm54
Membre
Inscription : 26-11-2016

[resolu] Pas d'écran de login suite à la migration vers debian jessie

Bonjour,

Suite à la migration de debian 7 wheezy à 8 jessie, le pc démarre bien mais l'ecran de login sous gnome n’apparaît pas.
La machine à une carte vidéo intégré intel i915.
J'ai trouvé un bug qui semble ressembler :
https://bugs.debian.org/cgi-bin/bugrepo … bug=788828
Merci d'avance pour les réponses

Dernière modification par ratm54 (27-11-2016 20:03:25)

Hors ligne

#2 26-11-2016 13:46:06

smolski
administrateur quasi...modo
Lieu : AIN
Distrib. : 8 (jessie) 64 bits + backports
Noyau : 3.16.0-4-amd64 - 3.16.39-1
(G)UI : gnome 1:3.14+3
Inscription : 21-10-2008

Re : [resolu] Pas d'écran de login suite à la migration vers debian jessie

Salut ratm54 et bienvenue sur df !

Peux-tu tout de même te positionner en console ?
Le tuto de la console :
https://debian-facile.org/doc:systeme:console smile

"Théo et Adama te rappellent pourquoi Zyed et Bouna couraient…"
"L'utopie ne signifie pas l'irréalisable, mais l'irréalisée." - T Monod (source :  La zone de Siné)
"Je peux rire de tout mais pas avec n'importe qui." - P Desproges
"saque eud dun" (patois chtimi : fonce dedans)

Hors ligne

#3 26-11-2016 13:56:52

robert2a
Membre
Lieu : France
Distrib. : Stretch 9
Noyau : Linux 4.9.0-3 4.9.30-2
(G)UI : Mate
Inscription : 15-11-2014

Re : [resolu] Pas d'écran de login suite à la migration vers debian jessie

Bonjour
tu ne serait pas victime d'un materiel un peu ancien avec gdm3 + gnome (le lien du bug que tu donne , parle de gnome donc je suppose que tu a ce bureau )
si tu peut donner des informations sur ton materiel et en autre le type de gpu (ou cpu) ou la marque et model de la carte mere.

Hors ligne

#4 26-11-2016 14:05:14

raleur
Membre
Inscription : 03-10-2014

Re : [resolu] Pas d'écran de login suite à la migration vers debian jessie

ratm54 a écrit :

l'ecran de login sous gnome n’apparaît pas.


Qu'est-ce qui apparaît à la place ?

Hors ligne

#5 26-11-2016 14:21:03

ratm54
Membre
Inscription : 26-11-2016

Re : [resolu] Pas d'écran de login suite à la migration vers debian jessie

smolski a écrit :

Salut ratm54 et bienvenue sur df !

Peux-tu tout de même te positionner en console ?
Le tuto de la console :
https://debian-facile.org/doc:systeme:console smile




Merci à tous pour les réponses rapide !

Plusieurs points :
1) Je suis utilisateurs avancé (sans être expert) de linux depuis plusieurs années (développeur web sous ubuntu)
2) J'ai accès au mode console. je suis allé en mode console et j'ai regardé le contenu de dmesg et de Xorg.0.log.  Je n'ai rien vu de transcendant à part un truc sur i915, mais je vous les afficherai demain.
3) l'écran est noir et freezé avec un underscore blanc en haut à gauche.
4) j'ai réinstallé xorg et gnome (apt-get install --reinstall). J'ai également fait un dpkg-reconfigure de Xorg et gnome.
5) Si j'arrête gdm3 (service gdm3 stop) et que je lance startx il s'arrête.
6) En installant lightdm j'ai l'écran de login mais des que je me log gnome plante.

Bref il s'agit d'un problème gnome (et peut être de ma carte vidéo intégré au processeur core i3 avec video i915 il me semble).

A demain et encore merci !

Hors ligne

#6 26-11-2016 15:07:37

robert2a
Membre
Lieu : France
Distrib. : Stretch 9
Noyau : Linux 4.9.0-3 4.9.30-2
(G)UI : Mate
Inscription : 15-11-2014

Re : [resolu] Pas d'écran de login suite à la migration vers debian jessie

c'est bien le probleme de gdm3 + gnome
tu peut installer mate-core puisque tu a lightdm pour retrouver ton bureau et quelques programmes de gnome.
pour ce bug peut etre qu il te manque quelque chose au niveau paquet (comme par exemple si DRI2 est bien chargé et ok )
le retour de ton Xorg.0.log (avec gdm3 et gnome ) peut donner des informations
tu peut aussi tester le mode classic de gnome avec lightdm (peut etre moins gourmand )
je laisse la main a raleur pour les conseils technique wink

Hors ligne

#7 26-11-2016 15:15:20

raleur
Membre
Inscription : 03-10-2014

Re : [resolu] Pas d'écran de login suite à la migration vers debian jessie

robert2a, je pense que tu en sais plus que moi sur les pilotes graphiques.

Hors ligne

#8 26-11-2016 15:24:06

robert2a
Membre
Lieu : France
Distrib. : Stretch 9
Noyau : Linux 4.9.0-3 4.9.30-2
(G)UI : Mate
Inscription : 15-11-2014

Re : [resolu] Pas d'écran de login suite à la migration vers debian jessie

pas sur smile , on a le meme probleme avec le driver nouveau et gdm3 + gnome pour une carte nvidia  sur stretch . (problème du driver nouveau )
il manque peut etre pas grand chose pour que ça fonctionne , sauf si c'est un pur probleme de ressources materielle du gpu .
il n'a pas précisé le model de I3 , je pense de premiere génération .

Hors ligne

#9 26-11-2016 20:16:45

ratm54
Membre
Inscription : 26-11-2016

Re : [resolu] Pas d'écran de login suite à la migration vers debian jessie

Alors

lshw


     *-cpu
          produit: Intel(R) Core(TM) i5-3470 CPU @ 3.20GHz
          fabriquant: Intel Corp.
          identifiant matériel: 1
          information bus: cpu@0
          taille: 1600MHz
          capacité: 3201MHz
          bits: 64 bits
          fonctionnalités: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp x86-64 constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm ida arat epb xsaveopt pln pts dtherm tpr_shadow vnmi flexpriority ept vpid fsgsbase smep erms cpufreq
     *-pci
          description: Host bridge
          produit: Xeon E3-1200 v2/3rd Gen Core processor DRAM Controller
          fabriquant: Intel Corporation
          identifiant matériel: 100
          information bus: pci@0000:00:00.0
          version: 09
          bits: 32 bits
          horloge: 33MHz
          configuration: driver=agpgart-intel
          ressources: irq:0
        *-display
             description: VGA compatible controller
             produit: Xeon E3-1200 v2/3rd Gen Core processor Graphics Controller
             fabriquant: Intel Corporation
             identifiant matériel: 2
             information bus: pci@0000:00:02.0
             version: 09
             bits: 64 bits
             horloge: 33MHz
             fonctionnalités: msi pm vga_controller bus_master cap_list rom
             configuration: driver=i915 latency=0
             ressources: irq:45 mémoire:f7800000-f7bfffff mémoire:e0000000-efffffff portE/S:f000(taille=64)




dmesg


[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.82-1
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=07428370-9acd-4a5e-86c1-834e88e76834 ro quiet
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
[    0.000000]  BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
[    0.000000]  BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
[    0.000000]  BIOS-e820: 0000000020200000 - 0000000040004000 (usable)
[    0.000000]  BIOS-e820: 0000000040004000 - 0000000040005000 (reserved)
[    0.000000]  BIOS-e820: 0000000040005000 - 00000000d8e8c000 (usable)
[    0.000000]  BIOS-e820: 00000000d8e8c000 - 00000000d930c000 (reserved)
[    0.000000]  BIOS-e820: 00000000d930c000 - 00000000d9424000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000d9424000 - 00000000da5dc000 (reserved)
[    0.000000]  BIOS-e820: 00000000da5dc000 - 00000000da5dd000 (usable)
[    0.000000]  BIOS-e820: 00000000da5dd000 - 00000000da620000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000da620000 - 00000000daa33000 (usable)
[    0.000000]  BIOS-e820: 00000000daa33000 - 00000000daff4000 (reserved)
[    0.000000]  BIOS-e820: 00000000daff4000 - 00000000db000000 (usable)
[    0.000000]  BIOS-e820: 00000000db800000 - 00000000dfa00000 (reserved)
[    0.000000]  BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed00000 - 00000000fed04000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 000000021e600000 (usable)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: MSI MS-7798/B75MA-P45 (MS-7798), BIOS V1.3 07/30/2012
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x21e600 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask E00000000 write-back
[    0.000000]   1 base 200000000 mask FE0000000 write-back
[    0.000000]   2 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   3 base 0DC000000 mask FFC000000 uncachable
[    0.000000]   4 base 0DB800000 mask FFF800000 uncachable
[    0.000000]   5 base 21F000000 mask FFF000000 uncachable
[    0.000000]   6 base 21E800000 mask FFF800000 uncachable
[    0.000000]   7 base 21E600000 mask FFFE00000 uncachable
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 00000000db800000 - 0000000100000000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0xdb000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [ffff8800000fd780] fd780
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
[    0.000000] init_memory_mapping: 0000000000000000-00000000db000000
[    0.000000]  0000000000 - 00db000000 page 2M
[    0.000000] kernel direct mapping tables up to db000000 @ 1fffb000-20000000
[    0.000000] init_memory_mapping: 0000000100000000-000000021e600000
[    0.000000]  0100000000 - 021e600000 page 2M
[    0.000000] kernel direct mapping tables up to 21e600000 @ daffa000-db000000
[    0.000000] RAMDISK: 3694a000 - 3749d000
[    0.000000] ACPI: RSDP 0x00000000000F0490 00024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x00000000D9415078 00074 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000D941ED90 0010C (v05 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI Warning: FADT (revision 5) is longer than ACPI 2.0 version, truncating length 268 to 244 (20110623/tbfadt-288)
[    0.000000] ACPI: DSDT 0x00000000D9415188 09C03 (v02 ALASKA A M I    00000021 INTL 20051117)
[    0.000000] ACPI: FACS 0x00000000D9422080 00040
[    0.000000] ACPI: APIC 0x00000000D941EEA0 00072 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x00000000D941EF18 00044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0x00000000D941EF60 0003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000D941EFA0 00038 (v01 ALASKA A M I    01072009 AMI. 00000005)
[    0.000000] ACPI: SSDT 0x00000000D941EFD8 0036D (v01 SataRe SataTabl 00001000 INTL 20091112)
[    0.000000] ACPI: SSDT 0x00000000D941F348 009AA (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 0x00000000D941FCF8 00A92 (v01 PmRef  CpuPm    00003000 INTL 20051117)
[    0.000000] ACPI: DMAR 0x00000000D9420790 000B8 (v01 INTEL  SNB      00000001 INTL 00000001)
[    0.000000] ACPI: ASF! 0x00000000D9420848 000A5 (v32 INTEL   HCG     00000001 TFSM 000F4240)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-000000021e600000
[    0.000000] Initmem setup node 0 0000000000000000-000000021e600000
[    0.000000]   NODE_DATA [000000021e5fb000 - 000000021e5fffff]
[    0.000000]  [ffffea0000000000-ffffea00077fffff] PMD -> [ffff880215c00000-ffff88021cdfffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x0021e600
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[8] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009d
[    0.000000]     0: 0x00000100 -> 0x00020000
[    0.000000]     0: 0x00020200 -> 0x00040004
[    0.000000]     0: 0x00040005 -> 0x000d8e8c
[    0.000000]     0: 0x000da5dc -> 0x000da5dd
[    0.000000]     0: 0x000da620 -> 0x000daa33
[    0.000000]     0: 0x000daff4 -> 0x000db000
[    0.000000]     0: 0x00100000 -> 0x0021e600
[    0.000000] On node 0 totalpages: 2061880
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 5 pages reserved
[    0.000000]   DMA zone: 3920 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 870627 pages, LIFO batch:31
[    0.000000]   Normal zone: 16037 pages used for memmap
[    0.000000]   Normal zone: 1156955 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[    0.000000] PM: Registered nosave memory: 0000000040004000 - 0000000040005000
[    0.000000] PM: Registered nosave memory: 00000000d8e8c000 - 00000000d930c000
[    0.000000] PM: Registered nosave memory: 00000000d930c000 - 00000000d9424000
[    0.000000] PM: Registered nosave memory: 00000000d9424000 - 00000000da5dc000
[    0.000000] PM: Registered nosave memory: 00000000da5dd000 - 00000000da620000
[    0.000000] PM: Registered nosave memory: 00000000daa33000 - 00000000daff4000
[    0.000000] PM: Registered nosave memory: 00000000db000000 - 00000000db800000
[    0.000000] PM: Registered nosave memory: 00000000db800000 - 00000000dfa00000
[    0.000000] PM: Registered nosave memory: 00000000dfa00000 - 00000000f8000000
[    0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
[    0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[    0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000
[    0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed04000
[    0.000000] PM: Registered nosave memory: 00000000fed04000 - 00000000fed1c000
[    0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[    0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[    0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
[    0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at dfa00000 (gap: dfa00000:18600000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88021e200000 s78912 r8192 d23488 u524288
[    0.000000] pcpu-alloc: s78912 r8192 d23488 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2031502
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=07428370-9acd-4a5e-86c1-834e88e76834 ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 8044144k/8886272k available (3445k kernel code, 638752k absent, 203376k reserved, 3294k data, 584k init)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:33024 nr_irqs:712 16
[    0.000000] Extended CMOS year: 2000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.004000] Detected 3192.887 MHz processor.
[    0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 6385.77 BogoMIPS (lpj=12771548)
[    0.000004] pid_max: default: 32768 minimum: 301
[    0.000029] Security Framework initialized
[    0.000032] AppArmor: AppArmor disabled by boot time parameter
[    0.000366] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.001896] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.002575] Mount-cache hash table entries: 256
[    0.002644] Initializing cgroup subsys cpuacct
[    0.002647] Initializing cgroup subsys memory
[    0.002653] Initializing cgroup subsys devices
[    0.002655] Initializing cgroup subsys freezer
[    0.002656] Initializing cgroup subsys net_cls
[    0.002658] Initializing cgroup subsys blkio
[    0.002662] Initializing cgroup subsys perf_event
[    0.002682] CPU: Physical Processor ID: 0
[    0.002683] CPU: Processor Core ID: 0
[    0.002687] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.002688] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.002967] mce: CPU supports 9 MCE banks
[    0.002977] CPU0: Thermal monitoring enabled (TM1)
[    0.002982] using mwait in idle threads.
[    0.003305] ACPI: Core revision 20110623
[    0.018710] DMAR: Host address width 36
[    0.018712] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.018718] IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[    0.018719] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.018723] IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[    0.018724] DMAR: RMRR base: 0x000000d92a2000 end: 0x000000d92affff
[    0.018726] DMAR: RMRR base: 0x000000db800000 end: 0x000000df9fffff
[    0.018795] IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.018796] HPET id 0 under DRHD base 0xfed91000
[    0.018917] Enabled IRQ remapping in x2apic mode
[    0.018918] Enabling x2apic
[    0.018919] Enabled x2apic
[    0.018923] Switched APIC routing to cluster x2apic.
[    0.019329] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.058924] CPU0: Intel(R) Core(TM) i5-3470 CPU @ 3.20GHz stepping 09
[    0.164012] Performance Events: PEBS fmt1+, generic architected perfmon, Intel PMU driver.
[    0.164018] ... version:                3
[    0.164019] ... bit width:              48
[    0.164019] ... generic registers:      8
[    0.164020] ... value mask:             0000ffffffffffff
[    0.164022] ... max period:             000000007fffffff
[    0.164023] ... fixed-purpose events:   3
[    0.164024] ... event mask:             00000007000000ff
[    0.164109] NMI watchdog enabled, takes one hw-pmu counter.
[    0.164177] Booting Node   0, Processors  #1
[    0.164178] smpboot cpu 1: start_ip = 98000
[    0.272166] NMI watchdog enabled, takes one hw-pmu counter.
[    0.272239]  #2
[    0.272240] smpboot cpu 2: start_ip = 98000
[    0.379926] NMI watchdog enabled, takes one hw-pmu counter.
[    0.380000]  #3 Ok.
[    0.380001] smpboot cpu 3: start_ip = 98000
[    0.487686] NMI watchdog enabled, takes one hw-pmu counter.
[    0.487709] Brought up 4 CPUs
[    0.487711] Total of 4 processors activated (25541.36 BogoMIPS).
[    0.490178] devtmpfs: initialized
[    0.492335] PM: Registering ACPI NVS region at d930c000 (1146880 bytes)
[    0.492358] PM: Registering ACPI NVS region at da5dd000 (274432 bytes)
[    0.492456] print_constraints: dummy:
[    0.492492] NET: Registered protocol family 16
[    0.492549] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.492550] ACPI: bus type pci registered
[    0.492592] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.492594] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.495593] PCI: Using configuration type 1 for base access
[    0.496093] bio: create slab <bio-0> at 0
[    0.496150] ACPI: Added _OSI(Module Device)
[    0.496151] ACPI: Added _OSI(Processor Device)
[    0.496152] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.496154] ACPI: Added _OSI(Processor Aggregator Device)
[    0.497114] ACPI: EC: Look up EC in DSDT
[    0.498218] ACPI: Executed 1 blocks of module-level executable AML code
[    0.511507] ACPI: SSDT 0x00000000D92B9018 0083B (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[    0.511755] ACPI: Dynamic OEM Table Load:
[    0.511756] ACPI: SSDT 0x0000000000000000 0083B (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[    0.523352] ACPI: SSDT 0x00000000D92BAA98 00303 (v01 PmRef  ApIst    00003000 INTL 20051117)
[    0.523622] ACPI: Dynamic OEM Table Load:
[    0.523624] ACPI: SSDT 0x0000000000000000 00303 (v01 PmRef  ApIst    00003000 INTL 20051117)
[    0.535220] ACPI: SSDT 0x00000000D92BBC18 00119 (v01 PmRef  ApCst    00003000 INTL 20051117)
[    0.535462] ACPI: Dynamic OEM Table Load:
[    0.535463] ACPI: SSDT 0x0000000000000000 00119 (v01 PmRef  ApCst    00003000 INTL 20051117)
[    0.547581] ACPI: Interpreter enabled
[    0.547583] ACPI: (supports S0 S3 S4 S5)
[    0.547599] ACPI: Using IOAPIC for interrupt routing
[    0.552154] ACPI: Power Resource [FN00] (off)
[    0.552211] ACPI: Power Resource [FN01] (off)
[    0.552264] ACPI: Power Resource [FN02] (off)
[    0.552319] ACPI: Power Resource [FN03] (off)
[    0.552373] ACPI: Power Resource [FN04] (off)
[    0.552666] ACPI: No dock devices found.
[    0.552668] HEST: Table not found.
[    0.552670] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.552908] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.553255] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    0.553256] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    0.553258] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.553260] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[    0.553261] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[    0.553263] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[    0.553264] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
[    0.553265] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
[    0.553267] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
[    0.553268] pci_root PNP0A08:00: host bridge window [mem 0xdfa00000-0xfeafffff]
[    0.553277] pci 0000:00:00.0: [8086:0150] type 0 class 0x000600
[    0.553305] pci 0000:00:02.0: [8086:0152] type 0 class 0x000300
[    0.553313] pci 0000:00:02.0: reg 10: [mem 0xf7800000-0xf7bfffff 64bit]
[    0.553317] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.553321] pci 0000:00:02.0: reg 20: [io  0xf000-0xf03f]
[    0.553362] pci 0000:00:14.0: [8086:1e31] type 0 class 0x000c03
[    0.553382] pci 0000:00:14.0: reg 10: [mem 0xf7c00000-0xf7c0ffff 64bit]
[    0.553446] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.553466] pci 0000:00:16.0: [8086:1e3a] type 0 class 0x000780
[    0.553487] pci 0000:00:16.0: reg 10: [mem 0xf7c1a000-0xf7c1a00f 64bit]
[    0.553557] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.553587] pci 0000:00:1a.0: [8086:1e2d] type 0 class 0x000c03
[    0.553606] pci 0000:00:1a.0: reg 10: [mem 0xf7c17000-0xf7c173ff]
[    0.553688] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.553711] pci 0000:00:1b.0: [8086:1e20] type 0 class 0x000403
[    0.553724] pci 0000:00:1b.0: reg 10: [mem 0xf7c10000-0xf7c13fff 64bit]
[    0.553785] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.553805] pci 0000:00:1c.0: [8086:1e10] type 1 class 0x000604
[    0.553876] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.553898] pci 0000:00:1c.1: [8086:1e12] type 1 class 0x000604
[    0.553970] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.554000] pci 0000:00:1d.0: [8086:1e26] type 0 class 0x000c03
[    0.554019] pci 0000:00:1d.0: reg 10: [mem 0xf7c16000-0xf7c163ff]
[    0.554101] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.554120] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[    0.554175] pci 0000:00:1f.0: [8086:1e49] type 0 class 0x000601
[    0.554290] pci 0000:00:1f.2: [8086:1e02] type 0 class 0x000106
[    0.554305] pci 0000:00:1f.2: reg 10: [io  0xf0b0-0xf0b7]
[    0.554312] pci 0000:00:1f.2: reg 14: [io  0xf0a0-0xf0a3]
[    0.554318] pci 0000:00:1f.2: reg 18: [io  0xf090-0xf097]
[    0.554325] pci 0000:00:1f.2: reg 1c: [io  0xf080-0xf083]
[    0.554331] pci 0000:00:1f.2: reg 20: [io  0xf060-0xf07f]
[    0.554338] pci 0000:00:1f.2: reg 24: [mem 0xf7c15000-0xf7c157ff]
[    0.554377] pci 0000:00:1f.2: PME# supported from D3hot
[    0.554392] pci 0000:00:1f.3: [8086:1e22] type 0 class 0x000c05
[    0.554405] pci 0000:00:1f.3: reg 10: [mem 0xf7c14000-0xf7c140ff 64bit]
[    0.554423] pci 0000:00:1f.3: reg 20: [io  0xf040-0xf05f]
[    0.554485] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[    0.554553] pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200
[    0.554572] pci 0000:02:00.0: reg 10: [io  0xe000-0xe0ff]
[    0.554604] pci 0000:02:00.0: reg 18: [mem 0xf0004000-0xf0004fff 64bit pref]
[    0.554625] pci 0000:02:00.0: reg 20: [mem 0xf0000000-0xf0003fff 64bit pref]
[    0.554712] pci 0000:02:00.0: supports D1 D2
[    0.554713] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.559108] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[    0.559111] pci 0000:00:1c.1:   bridge window [io  0xe000-0xefff]
[    0.559118] pci 0000:00:1c.1:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.559172] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
[    0.559180] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.559181] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.559183] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.559184] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[    0.559186] pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[    0.559188] pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[    0.559189] pci 0000:00:1e.0:   bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[    0.559192] pci 0000:00:1e.0:   bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[    0.559193] pci 0000:00:1e.0:   bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[    0.559195] pci 0000:00:1e.0:   bridge window [mem 0xdfa00000-0xfeafffff] (subtractive decode)
[    0.559210] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.559314] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.559346] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    0.559370] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[    0.559476]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.559625]  pci0000:00: ACPI _OSC control (0x18) granted
[    0.562758] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.562792] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.562824] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
[    0.562855] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.562886] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.562917] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.562949] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
[    0.562980] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.563043] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.563047] vgaarb: loaded
[    0.563048] vgaarb: bridge control possible 0000:00:02.0
[    0.563071] PCI: Using ACPI for IRQ routing
[    0.564463] PCI: pci_cache_line_size set to 64 bytes
[    0.564503] reserve RAM buffer: 000000000009d800 - 000000000009ffff
[    0.564505] reserve RAM buffer: 0000000040004000 - 0000000043ffffff
[    0.564506] reserve RAM buffer: 00000000d8e8c000 - 00000000dbffffff
[    0.564508] reserve RAM buffer: 00000000da5dd000 - 00000000dbffffff
[    0.564510] reserve RAM buffer: 00000000daa33000 - 00000000dbffffff
[    0.564511] reserve RAM buffer: 00000000db000000 - 00000000dbffffff
[    0.564512] reserve RAM buffer: 000000021e600000 - 000000021fffffff
[    0.564580] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.564584] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.566589] AMD NB: Cannot enumerate AMD northbridges.
[    0.566590] Switching to clocksource hpet
[    0.567699] pnp: PnP ACPI init
[    0.567707] ACPI: bus type pnp registered
[    0.567886] pnp 00:00: [bus 00-3e]
[    0.567888] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.567889] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.567891] pnp 00:00: [io  0x0d00-0xffff window]
[    0.567893] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.567894] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[    0.567895] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[    0.567897] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[    0.567898] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[    0.567899] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[    0.567900] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[    0.567902] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[    0.567903] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[    0.567904] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[    0.567906] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[    0.567907] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[    0.567908] pnp 00:00: [mem 0x000ec000-0x000effff window]
[    0.567909] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[    0.567911] pnp 00:00: [mem 0xdfa00000-0xfeafffff window]
[    0.567912] pnp 00:00: [mem 0x00010000-0x0001ffff window]
[    0.567946] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.567961] pnp 00:01: [mem 0xfed40000-0xfed44fff]
[    0.567983] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.567985] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.567992] pnp 00:02: [io  0x0000-0x001f]
[    0.567994] pnp 00:02: [io  0x0081-0x0091]
[    0.567995] pnp 00:02: [io  0x0093-0x009f]
[    0.567996] pnp 00:02: [io  0x00c0-0x00df]
[    0.567997] pnp 00:02: [dma 4]
[    0.568011] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.568016] pnp 00:03: [mem 0xff000000-0xffffffff]
[    0.568031] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
[    0.568082] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[    0.568097] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.568104] pnp 00:05: [io  0x002e-0x002f]
[    0.568106] pnp 00:05: [io  0x004e-0x004f]
[    0.568107] pnp 00:05: [io  0x0061]
[    0.568108] pnp 00:05: [io  0x0063]
[    0.568109] pnp 00:05: [io  0x0065]
[    0.568110] pnp 00:05: [io  0x0067]
[    0.568112] pnp 00:05: [io  0x0070]
[    0.568113] pnp 00:05: [io  0x0080]
[    0.568114] pnp 00:05: [io  0x0092]
[    0.568115] pnp 00:05: [io  0x00b2-0x00b3]
[    0.568116] pnp 00:05: [io  0x0680-0x069f]
[    0.568117] pnp 00:05: [io  0x1000-0x100f]
[    0.568118] pnp 00:05: [io  0xffff]
[    0.568119] pnp 00:05: [io  0xffff]
[    0.568120] pnp 00:05: [io  0x0400-0x0453]
[    0.568121] pnp 00:05: [io  0x0458-0x047f]
[    0.568122] pnp 00:05: [io  0x0500-0x057f]
[    0.568124] pnp 00:05: [io  0x164e-0x164f]
[    0.568147] system 00:05: [io  0x0680-0x069f] has been reserved
[    0.568149] system 00:05: [io  0x1000-0x100f] has been reserved
[    0.568150] system 00:05: [io  0xffff] has been reserved
[    0.568152] system 00:05: [io  0xffff] has been reserved
[    0.568153] system 00:05: [io  0x0400-0x0453] could not be reserved
[    0.568155] system 00:05: [io  0x0458-0x047f] has been reserved
[    0.568157] system 00:05: [io  0x0500-0x057f] has been reserved
[    0.568158] system 00:05: [io  0x164e-0x164f] has been reserved
[    0.568160] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.568166] pnp 00:06: [io  0x0070-0x0077]
[    0.568172] pnp 00:06: [irq 8]
[    0.568188] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.568206] pnp 00:07: [io  0x0454-0x0457]
[    0.568228] system 00:07: [io  0x0454-0x0457] has been reserved
[    0.568230] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.568303] pnp 00:08: [io  0x0000-0xffffffffffffffff disabled]
[    0.568304] pnp 00:08: [io  0x0a00-0x0a1f]
[    0.568305] pnp 00:08: [io  0x0a30-0x0a3f]
[    0.568306] pnp 00:08: [io  0x0000-0xffffffffffffffff disabled]
[    0.568329] system 00:08: [io  0x0a00-0x0a1f] has been reserved
[    0.568331] system 00:08: [io  0x0a30-0x0a3f] has been reserved
[    0.568332] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.568509] pnp 00:09: [io  0x03f8-0x03ff]
[    0.568514] pnp 00:09: [irq 4]
[    0.568516] pnp 00:09: [dma 0 disabled]
[    0.568553] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.568567] pnp 00:0a: [io  0x0010-0x001f]
[    0.568569] pnp 00:0a: [io  0x0022-0x003f]
[    0.568570] pnp 00:0a: [io  0x0044-0x005f]
[    0.568571] pnp 00:0a: [io  0x0062-0x0063]
[    0.568572] pnp 00:0a: [io  0x0065-0x006f]
[    0.568573] pnp 00:0a: [io  0x0072-0x007f]
[    0.568574] pnp 00:0a: [io  0x0080]
[    0.568575] pnp 00:0a: [io  0x0084-0x0086]
[    0.568576] pnp 00:0a: [io  0x0088]
[    0.568577] pnp 00:0a: [io  0x008c-0x008e]
[    0.568579] pnp 00:0a: [io  0x0090-0x009f]
[    0.568580] pnp 00:0a: [io  0x00a2-0x00bf]
[    0.568581] pnp 00:0a: [io  0x00e0-0x00ef]
[    0.568582] pnp 00:0a: [io  0x04d0-0x04d1]
[    0.568606] system 00:0a: [io  0x04d0-0x04d1] has been reserved
[    0.568608] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.568613] pnp 00:0b: [io  0x00f0-0x00ff]
[    0.568618] pnp 00:0b: [irq 13]
[    0.568634] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.568844] pnp 00:0c: [io  0x0378-0x037f]
[    0.568849] pnp 00:0c: [irq 5]
[    0.568850] pnp 00:0c: [dma 3]
[    0.568938] pnp 00:0c: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.569094] pnp 00:0d: [mem 0xfed1c000-0xfed1ffff]
[    0.569095] pnp 00:0d: [mem 0xfed10000-0xfed17fff]
[    0.569096] pnp 00:0d: [mem 0xfed18000-0xfed18fff]
[    0.569097] pnp 00:0d: [mem 0xfed19000-0xfed19fff]
[    0.569099] pnp 00:0d: [mem 0xf8000000-0xfbffffff]
[    0.569100] pnp 00:0d: [mem 0xfed20000-0xfed3ffff]
[    0.569101] pnp 00:0d: [mem 0xfed90000-0xfed93fff]
[    0.569102] pnp 00:0d: [mem 0xfed45000-0xfed8ffff]
[    0.569103] pnp 00:0d: [mem 0xff000000-0xffffffff]
[    0.569105] pnp 00:0d: [mem 0xfee00000-0xfeefffff]
[    0.569106] pnp 00:0d: [mem 0x00000000-0xffffffffffffffff disabled]
[    0.569142] system 00:0d: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.569145] system 00:0d: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.569146] system 00:0d: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.569148] system 00:0d: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.569150] system 00:0d: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.569151] system 00:0d: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.569153] system 00:0d: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.569155] system 00:0d: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.569157] system 00:0d: [mem 0xff000000-0xffffffff] has been reserved
[    0.569158] system 00:0d: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.569160] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.569260] pnp 00:0e: [mem 0x20000000-0x201fffff]
[    0.569261] pnp 00:0e: [mem 0x40004000-0x40004fff]
[    0.569297] system 00:0e: [mem 0x20000000-0x201fffff] has been reserved
[    0.569299] system 00:0e: [mem 0x40004000-0x40004fff] has been reserved
[    0.569300] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.569314] pnp: PnP ACPI: found 15 devices
[    0.569315] ACPI: ACPI bus type pnp unregistered
[    0.575177] PCI: max bus depth: 1 pci_try_num: 2
[    0.575198] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[    0.575208] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[    0.575210] pci 0000:00:1c.1:   bridge window [io  0xe000-0xefff]
[    0.575216] pci 0000:00:1c.1:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.575222] pci 0000:00:1e.0: PCI bridge to [bus 03-03]
[    0.575242] pci 0000:00:1c.0: setting latency timer to 64
[    0.575253] pci 0000:00:1c.1: setting latency timer to 64
[    0.575259] pci 0000:00:1e.0: setting latency timer to 64
[    0.575261] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.575263] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.575264] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.575265] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[    0.575267] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[    0.575268] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[    0.575270] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[    0.575271] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
[    0.575272] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
[    0.575274] pci_bus 0000:00: resource 13 [mem 0xdfa00000-0xfeafffff]
[    0.575275] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.575277] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.575278] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7]
[    0.575280] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff]
[    0.575281] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[    0.575282] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000d3fff]
[    0.575284] pci_bus 0000:03: resource 8 [mem 0x000d4000-0x000d7fff]
[    0.575285] pci_bus 0000:03: resource 9 [mem 0x000d8000-0x000dbfff]
[    0.575287] pci_bus 0000:03: resource 10 [mem 0x000dc000-0x000dffff]
[    0.575288] pci_bus 0000:03: resource 11 [mem 0x000e0000-0x000e3fff]
[    0.575289] pci_bus 0000:03: resource 12 [mem 0x000e4000-0x000e7fff]
[    0.575291] pci_bus 0000:03: resource 13 [mem 0xdfa00000-0xfeafffff]
[    0.575332] NET: Registered protocol family 2
[    0.576591] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.577131] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.578067] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.578182] TCP: Hash tables configured (established 524288 bind 65536)
[    0.578183] TCP reno registered
[    0.578192] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.578213] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.578294] NET: Registered protocol family 1
[    0.578304] pci 0000:00:02.0: Boot video device
[    0.578420] PCI: CLS 64 bytes, default 64
[    0.578450] Unpacking initramfs...
[    0.742106] Freeing initrd memory: 11596k freed
[    0.743139] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.743143] Placing 64MB software IO TLB between ffff8800d4e8c000 - ffff8800d8e8c000
[    0.743145] software IO TLB at phys 0xd4e8c000 - 0xd8e8c000
[    0.743482] audit: initializing netlink socket (disabled)
[    0.743490] type=2000 audit(1480183430.580:1): initialized
[    0.754384] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.754972] VFS: Disk quotas dquot_6.5.2
[    0.754990] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.755038] msgmni has been set to 15733
[    0.755140] alg: No test for stdrng (krng)
[    0.755158] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.755161] io scheduler noop registered
[    0.755162] io scheduler deadline registered
[    0.755173] io scheduler cfq registered (default)
[    0.755309] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.755321] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.755323] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.755586] intel_idle: MWAIT substates: 0x1120
[    0.755587] intel_idle: v0.4 model 0x3A
[    0.755588] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.755609] ERST: Table is not found!
[    0.755610] GHES: HEST is not enabled!
[    0.755644] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.775977] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.910372] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.910591] Linux agpgart interface v0.103
[    0.910637] agpgart-intel 0000:00:00.0: Intel Ivybridge Chipset
[    0.910676] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[    0.911333] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
[    0.911421] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[    0.911504] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    0.911846] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.911850] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.911916] mousedev: PS/2 mouse device common for all mice
[    0.911947] rtc_cmos 00:06: RTC can wake from S4
[    0.912047] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    0.912071] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.912120] cpuidle: using governor ladder
[    0.912174] cpuidle: using governor menu
[    0.912285] TCP cubic registered
[    0.912386] NET: Registered protocol family 10
[    0.912761] Mobile IPv6
[    0.912763] NET: Registered protocol family 17
[    0.912765] Registering the dns_resolver key type
[    0.912934] PM: Hibernation image not present or could not be loaded.
[    0.912942] registered taskstats version 1
[    0.913419] rtc_cmos 00:06: setting system clock to 2016-11-26 18:03:51 UTC (1480183431)
[    0.913467] Initializing network drop monitor service
[    0.914264] Freeing unused kernel memory: 584k freed
[    0.914310] Write protecting the kernel read-only data: 6144k
[    0.916059] Freeing unused kernel memory: 632k freed
[    0.917812] Freeing unused kernel memory: 680k freed
[    0.925192] systemd-udevd[60]: starting version 215
[    0.933490] usbcore: registered new interface driver usbfs
[    0.933505] usbcore: registered new interface driver hub
[    0.934026] usbcore: registered new device driver usb
[    0.934263] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.934295] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[    0.934298] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[    0.934311] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.934330] ehci_hcd 0000:00:1a.0: debug port 2
[    0.934550] SCSI subsystem initialized
[    0.935653] libata version 3.00 loaded.
[    0.936125] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    0.936180] r8169 0000:02:00.0: setting latency timer to 64
[    0.936275] r8169 0000:02:00.0: irq 42 for MSI/MSI-X
[    0.936547] r8169 0000:02:00.0: eth0: RTL8168evl/8111evl at 0xffffc900057a4000, d4:3d:7e:32:ba:12, XID 0c900800 IRQ 42
[    0.936549] r8169 0000:02:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    0.938216] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[    0.938229] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7c17000
[    0.953734] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.953781] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.953782] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.953784] usb usb1: Product: EHCI Host Controller
[    0.953785] usb usb1: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[    0.953786] usb usb1: SerialNumber: 0000:00:1a.0
[    0.953859] hub 1-0:1.0: USB hub found
[    0.953862] hub 1-0:1.0: 2 ports detected
[    0.953930] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.953932] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[    0.953937] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.953956] ehci_hcd 0000:00:1d.0: debug port 2
[    0.953986] thermal LNXTHERM:00: registered as thermal_zone0
[    0.953988] ACPI: Thermal Zone [TZ00] (28 C)
[    0.954096] thermal LNXTHERM:01: registered as thermal_zone1
[    0.954097] ACPI: Thermal Zone [TZ01] (30 C)
[    0.954321] ACPI: Fan [FAN0] (off)
[    0.954347] ACPI: Fan [FAN1] (off)
[    0.954370] ACPI: Fan [FAN2] (off)
[    0.954392] ACPI: Fan [FAN3] (off)
[    0.954413] ACPI: Fan [FAN4] (off)
[    0.957824] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[    0.957866] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf7c16000
[    0.973689] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.973726] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.973730] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.973733] usb usb2: Product: EHCI Host Controller
[    0.973735] usb usb2: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[    0.973737] usb usb2: SerialNumber: 0000:00:1d.0
[    0.973872] hub 2-0:1.0: USB hub found
[    0.973876] hub 2-0:1.0: 2 ports detected
[    0.973968] ahci 0000:00:1f.2: version 3.0
[    0.974052] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[    0.989670] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x9 impl SATA mode
[    0.989676] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[    0.989682] ahci 0000:00:1f.2: setting latency timer to 64
[    0.998026] scsi0 : ahci
[    0.998251] scsi1 : ahci
[    0.998413] scsi2 : ahci
[    0.998577] scsi3 : ahci
[    0.998743] scsi4 : ahci
[    0.998888] scsi5 : ahci
[    0.999086] ata1: SATA max UDMA/133 abar m2048@0xf7c15000 port 0xf7c15100 irq 43
[    0.999088] ata2: DUMMY
[    0.999089] ata3: DUMMY
[    0.999090] ata4: SATA max UDMA/133 abar m2048@0xf7c15000 port 0xf7c15280 irq 43
[    0.999092] ata5: DUMMY
[    0.999092] ata6: DUMMY
[    0.999233] xhci_hcd 0000:00:14.0: setting latency timer to 64
[    0.999237] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.999244] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    1.000311] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.000347] xhci_hcd 0000:00:14.0: irq 44 for MSI/MSI-X
[    1.000382] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.000383] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.000385] usb usb3: Product: xHCI Host Controller
[    1.000386] usb usb3: Manufacturer: Linux 3.2.0-4-amd64 xhci_hcd
[    1.000387] usb usb3: SerialNumber: 0000:00:14.0
[    1.000445] xHCI xhci_add_endpoint called for root hub
[    1.000447] xHCI xhci_check_bandwidth called for root hub
[    1.000466] hub 3-0:1.0: USB hub found
[    1.000472] hub 3-0:1.0: 4 ports detected
[    1.000512] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.000515] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    1.000526] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    1.000528] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.000529] usb usb4: Product: xHCI Host Controller
[    1.000530] usb usb4: Manufacturer: Linux 3.2.0-4-amd64 xhci_hcd
[    1.000531] usb usb4: SerialNumber: 0000:00:14.0
[    1.000605] xHCI xhci_add_endpoint called for root hub
[    1.000606] xHCI xhci_check_bandwidth called for root hub
[    1.000620] hub 4-0:1.0: USB hub found
[    1.000626] hub 4-0:1.0: 4 ports detected
[    1.265023] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[    1.316919] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.318984] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
[    1.318989] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT3._GTF] (Node ffff88021548cf10), AE_NOT_FOUND (20110623/psparse-536)
[    1.318998] ata4.00: ATAPI: TSSTcorp CDDVDW SH-224BB, SB00, max UDMA/100
[    1.319904] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
[    1.319908] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT3._GTF] (Node ffff88021548cf10), AE_NOT_FOUND (20110623/psparse-536)
[    1.319917] ata4.00: configured for UDMA/100
[    1.328891] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.329506] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
[    1.329510] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff88021548c218), AE_NOT_FOUND (20110623/psparse-536)
[    1.329546] ata1.00: ATA-9: OCZ-VERTEX4, 1.5, max UDMA/133
[    1.329548] ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.330168] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
[    1.330172] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff88021548c218), AE_NOT_FOUND (20110623/psparse-536)
[    1.330209] ata1.00: configured for UDMA/133
[    1.330368] scsi 0:0:0:0: Direct-Access     ATA      OCZ-VERTEX4      1.5  PQ: 0 ANSI: 5
[    1.332769] scsi 3:0:0:0: CD-ROM            TSSTcorp CDDVDW SH-224BB  SB00 PQ: 0 ANSI: 5
[    1.335052] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[    1.335082] sd 0:0:0:0: [sda] Write Protect is off
[    1.335084] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.335094] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.335565]  sda: sda1 < sda5 > sda2 sda3
[    1.335842] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.337172] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.337175] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.337312] sr 3:0:0:0: Attached scsi CD-ROM sr0
[    1.337959] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.337992] sr 3:0:0:0: Attached scsi generic sg1 type 5
[    1.397184] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.397189] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.397553] hub 1-1:1.0: USB hub found
[    1.397609] hub 1-1:1.0: 6 ports detected
[    1.508470] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[    1.640641] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.640645] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.640870] hub 2-1:1.0: USB hub found
[    1.640962] hub 2-1:1.0: 6 ports detected
[    1.710128] PM: Starting manual resume from disk
[    1.710130] PM: Hibernation image partition 8:5 present
[    1.710131] PM: Looking for hibernation image.
[    1.710323] PM: Image not found (code -22)
[    1.710325] PM: Hibernation image not present or could not be loaded.
[    1.712015] usb 1-1.1: new low-speed USB device number 3 using ehci_hcd
[    1.739956] Refined TSC clocksource calibration: 3192.747 MHz.
[    1.739961] Switching to clocksource tsc
[    1.810005] usb 1-1.1: New USB device found, idVendor=046d, idProduct=c31c
[    1.810010] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.810013] usb 1-1.1: Product: USB Keyboard
[    1.810015] usb 1-1.1: Manufacturer: Logitech
[    1.817453] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input0
[    1.817573] generic-usb 0003:046D:C31C.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:1a.0-1.1/input0
[    1.823425] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/input/input1
[    1.823495] generic-usb 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:1a.0-1.1/input1
[    1.823504] usbcore: registered new interface driver usbhid
[    1.823505] usbhid: USB HID core driver
[    1.865118] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    1.883617] usb 1-1.2: new low-speed USB device number 4 using ehci_hcd
[    1.984651] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c50e
[    1.984653] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.984655] usb 1-1.2: Product: USB RECEIVER
[    1.984656] usb 1-1.2: Manufacturer: Logitech
[    1.992099] input: Logitech USB RECEIVER as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input2
[    1.992226] generic-usb 0003:046D:C50E.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB RECEIVER] on usb-0000:00:1a.0-1.2/input0
[    2.063210] usb 1-1.4: new high-speed USB device number 5 using ehci_hcd
[    2.123176] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[    2.123294] systemd[1]: Detected architecture 'x86-64'.
[    2.133406] systemd[1]: Inserted module 'autofs4'
[    2.133610] systemd[1]: Set hostname to <amsq-serveur2>.
[    2.156417] usb 1-1.4: New USB device found, idVendor=0cf2, idProduct=6230
[    2.156419] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=4
[    2.156421] usb 1-1.4: Product: UB623X      
[    2.156422] usb 1-1.4: Manufacturer: ENE Flash  
[    2.156423] usb 1-1.4: SerialNumber: 606569746801
[    2.206178] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    2.206222] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    2.206230] systemd[1]: Starting Remote File Systems (Pre).
[    2.206249] systemd[1]: Reached target Remote File Systems (Pre).
[    2.206256] systemd[1]: Starting Encrypted Volumes.
[    2.206262] systemd[1]: Reached target Encrypted Volumes.
[    2.206271] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[    2.206291] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    2.206304] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    2.206360] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    2.206369] systemd[1]: Expecting device dev-disk-by\x2duuid-c9c89fab\x2dc6d6\x2d400f\x2da6c6\x2d4bf5d064e371.device...
[    2.206376] systemd[1]: Expecting device dev-disk-by\x2duuid-8e578d82\x2d3fdc\x2d46dc\x2dacf9\x2d3b956109cf00.device...
[    2.206383] systemd[1]: Starting Root Slice.
[    2.206396] systemd[1]: Created slice Root Slice.
[    2.206402] systemd[1]: Starting Delayed Shutdown Socket.
[    2.206423] systemd[1]: Listening on Delayed Shutdown Socket.
[    2.206429] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    2.206447] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    2.206453] systemd[1]: Starting Journal Socket (/dev/log).
[    2.206470] systemd[1]: Listening on Journal Socket (/dev/log).
[    2.206478] systemd[1]: Starting udev Control Socket.
[    2.206493] systemd[1]: Listening on udev Control Socket.
[    2.206500] systemd[1]: Starting udev Kernel Socket.
[    2.206511] systemd[1]: Listening on udev Kernel Socket.
[    2.206517] systemd[1]: Starting User and Session Slice.
[    2.206537] systemd[1]: Created slice User and Session Slice.
[    2.206544] systemd[1]: Starting Journal Socket.
[    2.206562] systemd[1]: Listening on Journal Socket.
[    2.206573] systemd[1]: Starting System Slice.
[    2.206592] systemd[1]: Created slice System Slice.
[    2.206602] systemd[1]: Started File System Check on Root Device.
[    2.206607] systemd[1]: Starting system-systemd\x2dfsck.slice.
[    2.206630] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    2.206644] systemd[1]: Starting Increase datagram queue length...
[    2.242969] systemd[1]: Mounting Huge Pages File System...
[    2.418515] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    2.635101] systemd[1]: Started Set Up Additional Binary Formats.
[    2.635509] systemd[1]: Starting Load Kernel Modules...
[    2.725802] systemd[1]: Starting udev Coldplug all Devices...
[    2.951085] lp: driver loaded but no devices found
[    2.952334] ppdev: user-space parallel port driver
[    2.953155] parport_pc 00:0c: reported by Plug and Play ACPI
[    2.953201] parport0: PC-style at 0x378, irq 5 [PCSPP]
[    2.969296] systemd[1]: Mounting Debug File System...
[    3.049250] lp0: using parport0 (interrupt-driven).
[    3.050975] fuse init (API version 7.17)
[    3.053032] loop: module loaded
[    3.128860] systemd[1]: Mounting POSIX Message Queue File System...
[    3.348372] systemd[1]: Starting system-getty.slice.
[    3.452242] systemd[1]: Created slice system-getty.slice.
[    3.452265] systemd[1]: Starting Slices.
[    3.452274] systemd[1]: Reached target Slices.
[    3.592023] systemd[1]: Mounted Debug File System.
[    3.592045] systemd[1]: Mounted Huge Pages File System.
[    3.611727] systemd[1]: Started Increase datagram queue length.
[    3.643711] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    3.695546] systemd[1]: Started Load Kernel Modules.
[    3.887158] systemd[1]: Mounted POSIX Message Queue File System.
[    4.106600] systemd[1]: Started udev Coldplug all Devices.
[    4.107083] systemd[1]: Mounting FUSE Control File System...
[    4.126636] systemd[1]: Starting Apply Kernel Variables...
[    4.270321] systemd[1]: Mounted Configuration File System.
[    4.270374] systemd[1]: Starting Create Static Device Nodes in /dev...
[    4.501761] systemd[1]: Starting Syslog Socket.
[    4.501790] systemd[1]: Listening on Syslog Socket.
[    4.501817] systemd[1]: Starting Journal Service...
[    4.717291] systemd[1]: Started Journal Service.
[    5.242860] systemd-udevd[171]: starting version 215
[    5.280813] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[    5.280819] ACPI: Power Button [PWRB]
[    5.280853] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[    5.280855] ACPI: Power Button [PWRF]
[    5.282707] ACPI: Requesting acpi_cpufreq
[    5.291370] [drm] Initialized drm 1.1.0 20060810
[    5.293403] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    5.298213] iTCO_vendor_support: vendor-support=0
[    5.299107] ACPI: resource 0000:00:1f.3 [io  0xf040-0xf05f] conflicts with ACPI region SMBI [io 0xf040-0xf04f]
[    5.299109] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.299196] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[    5.299247] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[    5.299289] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    5.302864] i915 0000:00:02.0: setting latency timer to 64
[    5.303129] input: PC Speaker as /devices/platform/pcspkr/input/input5
[    5.304894] Error: Driver 'pcspkr' is already registered, aborting...
[    5.317888] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
[    5.317890] [drm] MTRR allocation failed.  Graphics performance may suffer.
[    5.318009] i915 0000:00:02.0: irq 45 for MSI/MSI-X
[    5.318015] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    5.318016] [drm] Driver supports precise vblank timestamp query.
[    5.318059] [drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call failed
[    5.318268] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    5.320669] Initializing USB Mass Storage driver...
[    5.320857] scsi6 : usb-storage 1-1.4:1.0
[    5.320899] usbcore: registered new interface driver usb-storage
[    5.320901] USB Mass Storage support registered.
[    5.322501] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[    5.354218] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[    5.653391] fbcon: inteldrmfb (fb0) is primary device
[    5.836580] Console: switching to colour frame buffer device 240x67
[    5.847305] fb0: inteldrmfb frame buffer device
[    5.847307] drm: registered panic notifier
[    5.895092] acpi device:49: registered as cooling_device9
[    5.895346] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[    5.895515] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    5.895540] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    5.895731] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[    5.895761] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[    5.942491] hda_codec: ALC887-VD: BIOS auto-probing.
[    5.948932] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[    6.318528] scsi 6:0:0:0: Direct-Access     USB2.0   CardReader CF    0100 PQ: 0 ANSI: 0
[    6.319145] scsi 6:0:0:1: Direct-Access     USB2.0   CardReader SM XD 0100 PQ: 0 ANSI: 0
[    6.319607] scsi 6:0:0:2: Direct-Access     USB2.0   CardReader MS    0100 PQ: 0 ANSI: 0
[    6.320106] scsi 6:0:0:3: Direct-Access     USB2.0   CardReader SD    0100 PQ: 0 ANSI: 0
[    6.320934] sd 6:0:0:0: Attached scsi generic sg2 type 0
[    6.321252] sd 6:0:0:1: Attached scsi generic sg3 type 0
[    6.322393] sd 6:0:0:2: Attached scsi generic sg4 type 0
[    6.324396] sd 6:0:0:3: Attached scsi generic sg5 type 0
[    6.348014] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[    6.348763] sd 6:0:0:2: [sdd] Attached SCSI removable disk
[    6.350714] sd 6:0:0:3: [sde] Attached SCSI removable disk
[    6.351462] sd 6:0:0:1: [sdc] Attached SCSI removable disk
[    6.450645] Adding 3905532k swap on /dev/sda5.  Priority:-1 extents:1 across:3905532k SSD
[    6.680995] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro,discard,commit=600
[    7.594165] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: discard,commit=600
[    8.872125] systemd-journald[168]: Received request to flush runtime journal from PID 1
[    8.914343] r8169 0000:02:00.0: firmware: agent aborted loading rtl_nic/rtl8168e-3.fw (not found?)
[    8.914492] r8169 0000:02:00.0: eth0: unable to load firmware patch rtl_nic/rtl8168e-3.fw (-2)
[    8.924590] r8169 0000:02:00.0: eth0: link down
[    8.924639] r8169 0000:02:00.0: eth0: link down
[    8.925419] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   11.270404] r8169 0000:02:00.0: eth0: link up
[   11.271327] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   14.291347] RPC: Registered named UNIX socket transport module.
[   14.291351] RPC: Registered udp transport module.
[   14.291353] RPC: Registered tcp transport module.
[   14.291355] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   14.296482] FS-Cache: Loaded
[   14.304924] FS-Cache: Netfs 'nfs' registered for caching
[   14.310340] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   21.973969] eth0: no IPv6 routers present




et le contenu du fichier Xorg.0.log

[    23.405]
X.Org X Server 1.16.4
Release Date: 2014-12-20
[    23.405] X Protocol Version 11, Revision 0
[    23.405] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[    23.405] Current Operating System: Linux amsq-serveur2 3.2.0-4-amd64 #1 SMP Debian 3.2.82-1 x86_64
[    23.405] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=07428370-9acd-4a5e-86c1-834e88e76834 ro quiet
[    23.405] Build Date: 11 February 2015  12:32:02AM
[    23.405] xorg-server 2:1.16.4-1 (http://www.debian.org/support)
[    23.405] Current version of pixman: 0.32.6
[    23.405]  Before reporting problems, check http://wiki.x.org
  to make sure that you have the latest version.
[    23.405] Markers: (--) probed, (**) from config file, (==) default setting,
  (++) from command line, (!!) notice, (II) informational,
  (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    23.405] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Nov 26 19:04:14 2016
[    23.405] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    23.406] (==) No Layout section.  Using the first Screen section.
[    23.406] (==) No screen section available. Using defaults.
[    23.406] (**) |-->Screen "Default Screen Section" (0)
[    23.406] (**) |   |-->Monitor "<default monitor>"
[    23.407] (==) No monitor specified for screen "Default Screen Section".
  Using a default monitor configuration.
[    23.407] (==) Automatically adding devices
[    23.407] (==) Automatically enabling devices
[    23.407] (==) Automatically adding GPU devices
[    23.409] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    23.409]  Entry deleted from font path.
[    23.412] (==) FontPath set to:
  /usr/share/fonts/X11/misc,
  /usr/share/fonts/X11/100dpi/:unscaled,
  /usr/share/fonts/X11/75dpi/:unscaled,
  /usr/share/fonts/X11/Type1,
  /usr/share/fonts/X11/100dpi,
  /usr/share/fonts/X11/75dpi,
  built-ins
[    23.412] (==) ModulePath set to "/usr/lib/xorg/modules"
[    23.412] (II) The server relies on udev to provide the list of input devices.
  If no devices become available, reconfigure udev or disable AutoAddDevices.
[    23.412] (II) Loader magic: 0x7f800f180d80
[    23.412] (II) Module ABI versions:
[    23.412]  X.Org ANSI C Emulation: 0.4
[    23.412]  X.Org Video Driver: 18.0
[    23.412]  X.Org XInput driver : 21.0
[    23.412]  X.Org Server Extension : 8.0
[    23.412] (II) xfree86: Adding drm device (/dev/dri/card0)
[    23.413] (--) PCI:*(0:0:2:0) 8086:0152:1462:2111 rev 9, Mem @ 0xf7800000/4194304, 0xe0000000/268435456, I/O @ 0x0000f000/64
[    23.413] (II) LoadModule: "glx"
[    23.416] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    23.424] (II) Module glx: vendor="X.Org Foundation"
[    23.424]  compiled for 1.16.4, module version = 1.0.0
[    23.424]  ABI class: X.Org Server Extension, version 8.0
[    23.424] (==) AIGLX enabled
[    23.425] (==) Matched intel as autoconfigured driver 0
[    23.425] (==) Matched intel as autoconfigured driver 1
[    23.425] (==) Matched modesetting as autoconfigured driver 2
[    23.425] (==) Matched fbdev as autoconfigured driver 3
[    23.425] (==) Matched vesa as autoconfigured driver 4
[    23.425] (==) Assigned the driver to the xf86ConfigLayout
[    23.425] (II) LoadModule: "intel"
[    23.425] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    23.428] (II) Module intel: vendor="X.Org Foundation"
[    23.428]  compiled for 1.15.99.904, module version = 2.21.15
[    23.428]  Module class: X.Org Video Driver
[    23.428]  ABI class: X.Org Video Driver, version 18.0
[    23.428] (II) LoadModule: "modesetting"
[    23.428] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    23.429] (II) Module modesetting: vendor="X.Org Foundation"
[    23.429]  compiled for 1.16.4, module version = 0.9.0
[    23.429]  Module class: X.Org Video Driver
[    23.429]  ABI class: X.Org Video Driver, version 18.0
[    23.429] (II) LoadModule: "fbdev"
[    23.429] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    23.429] (II) Module fbdev: vendor="X.Org Foundation"
[    23.429]  compiled for 1.15.99.904, module version = 0.4.4
[    23.429]  Module class: X.Org Video Driver
[    23.429]  ABI class: X.Org Video Driver, version 18.0
[    23.429] (II) LoadModule: "vesa"
[    23.429] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    23.430] (II) Module vesa: vendor="X.Org Foundation"
[    23.430]  compiled for 1.15.99.904, module version = 2.3.3
[    23.430]  Module class: X.Org Video Driver
[    23.430]  ABI class: X.Org Video Driver, version 18.0
[    23.430] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
  i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
  915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
  Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
  GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
  HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
  HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
  HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
  HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
[    23.430] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    23.431] (II) FBDEV: driver for framebuffer: fbdev
[    23.431] (II) VESA: driver for VESA chipsets: vesa
[    23.431] (++) using VT number 7

[    23.437] (WW) Falling back to old probe method for modesetting
[    23.437] (WW) Falling back to old probe method for fbdev
[    23.437] (II) Loading sub module "fbdevhw"
[    23.437] (II) LoadModule: "fbdevhw"
[    23.437] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    23.437] (II) Module fbdevhw: vendor="X.Org Foundation"
[    23.437]  compiled for 1.16.4, module version = 0.0.2
[    23.437]  ABI class: X.Org Video Driver, version 18.0
[    23.437] (WW) Falling back to old probe method for vesa
[    23.437] (II) intel(0): Creating default Display subsection in Screen section
  "Default Screen Section" for depth/fbbpp 24/32
[    23.437] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    23.437] (==) intel(0): RGB weight 888
[    23.437] (==) intel(0): Default visual is TrueColor
[    23.437] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 2500
[    23.437] (**) intel(0): Relaxed fencing enabled
[    23.437] (**) intel(0): Wait on SwapBuffers? enabled
[    23.437] (**) intel(0): Triple buffering? enabled
[    23.437] (**) intel(0): Framebuffer tiled
[    23.437] (**) intel(0): Pixmaps tiled
[    23.437] (**) intel(0): 3D buffers tiled
[    23.437] (**) intel(0): SwapBuffers wait enabled
[    23.437] (==) intel(0): video overlay key set to 0x101fe
[    23.438] (II) intel(0): Output VGA1 has no monitor section
[    23.507] (II) intel(0): Output HDMI1 has no monitor section
[    23.556] (II) intel(0): Output DP1 has no monitor section
[    23.556] (II) intel(0): EDID for output VGA1
[    23.625] (II) intel(0): EDID for output HDMI1
[    23.625] (II) intel(0): Manufacturer: IVM  Model: 561a  Serial#: 16843009
[    23.625] (II) intel(0): Year: 2011  Week: 51
[    23.625] (II) intel(0): EDID Version: 1.3
[    23.625] (II) intel(0): Digital Display Input
[    23.625] (II) intel(0): DFP 1.x compatible TMDS
[    23.625] (II) intel(0): Max Image Size [cm]: horiz.: 48  vert.: 27
[    23.625] (II) intel(0): Gamma: 2.20
[    23.625] (II) intel(0): DPMS capabilities: Off
[    23.625] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[    23.625] (II) intel(0): First detailed timing is preferred mode
[    23.625] (II) intel(0): redX: 0.643 redY: 0.353   greenX: 0.329 greenY: 0.629
[    23.625] (II) intel(0): blueX: 0.154 blueY: 0.057   whiteX: 0.313 whiteY: 0.329
[    23.625] (II) intel(0): Supported established timings:
[    23.625] (II) intel(0): 720x400@70Hz
[    23.625] (II) intel(0): 640x480@60Hz
[    23.625] (II) intel(0): 640x480@67Hz
[    23.626] (II) intel(0): 640x480@72Hz
[    23.626] (II) intel(0): 640x480@75Hz
[    23.626] (II) intel(0): 800x600@56Hz
[    23.626] (II) intel(0): 800x600@60Hz
[    23.626] (II) intel(0): 800x600@72Hz
[    23.626] (II) intel(0): 800x600@75Hz
[    23.626] (II) intel(0): 832x624@75Hz
[    23.626] (II) intel(0): 1024x768@60Hz
[    23.626] (II) intel(0): 1024x768@70Hz
[    23.626] (II) intel(0): 1024x768@75Hz
[    23.626] (II) intel(0): 1280x1024@75Hz
[    23.626] (II) intel(0): 1152x864@75Hz
[    23.626] (II) intel(0): Manufacturer's mask: 0
[    23.626] (II) intel(0): Supported standard timings:
[    23.626] (II) intel(0): #0: hsize: 1680  vsize 1050  refresh: 60  vid: 179
[    23.626] (II) intel(0): #1: hsize: 1600  vsize 1200  refresh: 60  vid: 16553
[    23.626] (II) intel(0): #2: hsize: 1440  vsize 900  refresh: 60  vid: 149
[    23.626] (II) intel(0): #3: hsize: 1280  vsize 960  refresh: 60  vid: 16513
[    23.626] (II) intel(0): #4: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    23.626] (II) intel(0): #5: hsize: 1440  vsize 900  refresh: 75  vid: 3989
[    23.626] (II) intel(0): #6: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[    23.626] (II) intel(0): #7: hsize: 1920  vsize 1080  refresh: 60  vid: 49361
[    23.626] (II) intel(0): Supported detailed timing:
[    23.626] (II) intel(0): clock: 148.5 MHz   Image Size:  477 x 268 mm
[    23.626] (II) intel(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[    23.626] (II) intel(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[    23.626] (II) intel(0): Serial No: 1110815100657
[    23.626] (II) intel(0): Ranges: V min: 55 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
[    23.626] (II) intel(0): Monitor name: PL2273HD
[    23.626] (II) intel(0): EDID (in hex):
[    23.626] (II) intel(0):   00ffffffffffff0026cd1a5601010101
[    23.626] (II) intel(0):   3315010381301b782a94a5a45a54a127
[    23.626] (II) intel(0):   0e5054bfef80b300a940950081408180
[    23.626] (II) intel(0):   950f714fd1c0023a801871382d40582c
[    23.626] (II) intel(0):   4500dd0c1100001e000000ff00313131
[    23.626] (II) intel(0):   30383135313030363537000000fd0037
[    23.626] (II) intel(0):   4c1e5311000a202020202020000000fc
[    23.626] (II) intel(0):   00504c3232373348440a202020200024
[    23.626] (II) intel(0): Printing probed modes for output HDMI1
[    23.626] (II) intel(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    23.626] (II) intel(0): Modeline "1600x1200"x60.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[    23.626] (II) intel(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[    23.626] (II) intel(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    23.626] (II) intel(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    23.626] (II) intel(0): Modeline "1440x900"x75.0  136.75  1440 1536 1688 1936  900 903 909 942 -hsync +vsync (70.6 kHz e)
[    23.626] (II) intel(0): Modeline "1440x900"x59.9  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz e)
[    23.626] (II) intel(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[    23.626] (II) intel(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    23.626] (II) intel(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz e)
[    23.626] (II) intel(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    23.626] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    23.626] (II) intel(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    23.626] (II) intel(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    23.626] (II) intel(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    23.626] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    23.626] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    23.626] (II) intel(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 491 520 -hsync -vsync (37.9 kHz e)
[    23.626] (II) intel(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    23.626] (II) intel(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    23.626] (II) intel(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    23.626] (II) intel(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    23.684] (II) intel(0): EDID for output DP1
[    23.684] (II) intel(0): Output VGA1 disconnected
[    23.684] (II) intel(0): Output HDMI1 connected
[    23.684] (II) intel(0): Output DP1 disconnected
[    23.684] (II) intel(0): Using exact sizes for initial modes
[    23.684] (II) intel(0): Output HDMI1 using initial mode 1920x1080
[    23.684] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    23.684] (II) intel(0): Kernel page flipping support detected, enabling
[    23.684] (==) intel(0): DPI set to (96, 96)
[    23.684] (II) Loading sub module "fb"
[    23.684] (II) LoadModule: "fb"
[    23.684] (II) Loading /usr/lib/xorg/modules/libfb.so
[    23.685] (II) Module fb: vendor="X.Org Foundation"
[    23.685]  compiled for 1.16.4, module version = 1.0.0
[    23.685]  ABI class: X.Org ANSI C Emulation, version 0.4
[    23.685] (II) Loading sub module "dri2"
[    23.685] (II) LoadModule: "dri2"
[    23.685] (II) Module "dri2" already built-in
[    23.685] (II) UnloadModule: "modesetting"
[    23.685] (II) Unloading modesetting
[    23.685] (II) UnloadModule: "fbdev"
[    23.685] (II) Unloading fbdev
[    23.685] (II) UnloadSubModule: "fbdevhw"
[    23.685] (II) Unloading fbdevhw
[    23.685] (II) UnloadModule: "vesa"
[    23.685] (II) Unloading vesa
[    23.685] (==) Depth 24 pixmap format is 32 bpp
[    23.686] (II) intel(0): [DRI2] Setup complete
[    23.686] (II) intel(0): [DRI2]   DRI driver: i965
[    23.686] (II) intel(0): Allocated new frame buffer 1920x1080 stride 7680, tiled
[    23.688] (II) UXA(0): Driver registered support for the following operations:
[    23.688] (II)         solid
[    23.688] (II)         copy
[    23.688] (II)         composite (RENDER acceleration)
[    23.688] (II)         put_image
[    23.688] (II)         get_image
[    23.688] (==) intel(0): Backing store enabled
[    23.688] (==) intel(0): Silken mouse enabled
[    23.689] (II) intel(0): Initializing HW Cursor
[    23.689] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    23.689] (==) intel(0): DPMS enabled
[    23.689] (==) intel(0): Intel XvMC decoder enabled
[    23.689] (II) intel(0): Set up textured video
[    23.689] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[    23.689] (II) intel(0): direct rendering: DRI2 Enabled
[    23.689] (==) intel(0): hotplug detection: "enabled"
[    23.752] (--) RandR disabled
[    23.759] (II) SELinux: Disabled on system
[    23.785] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    23.785] (II) AIGLX: enabled GLX_ARB_create_context
[    23.785] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    23.785] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[    23.785] (II) AIGLX: enabled GLX_INTEL_swap_event
[    23.785] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    23.785] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[    23.785] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[    23.785] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    23.785] (II) AIGLX: Loaded and initialized i965
[    23.785] (II) GLX: Initialized DRI2 GL provider for screen 0
[    23.785] (II) intel(0): Setting screen physical size to 508 x 285
[    23.820] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[    23.820] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    23.820] (II) LoadModule: "evdev"
[    23.821] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    23.823] (II) Module evdev: vendor="X.Org Foundation"
[    23.823]  compiled for 1.16.0, module version = 2.9.0
[    23.823]  Module class: X.Org XInput Driver
[    23.823]  ABI class: X.Org XInput driver, version 21.0
[    23.823] (II) Using input driver 'evdev' for 'Power Button'
[    23.823] (**) Power Button: always reports core events
[    23.823] (**) evdev: Power Button: Device: "/dev/input/event4"
[    23.823] (--) evdev: Power Button: Vendor 0 Product 0x1
[    23.823] (--) evdev: Power Button: Found keys
[    23.823] (II) evdev: Power Button: Configuring as keyboard
[    23.823] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[    23.823] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    23.823] (**) Option "xkb_rules" "evdev"
[    23.823] (**) Option "xkb_model" "pc105"
[    23.823] (**) Option "xkb_layout" "fr"
[    23.823] (**) Option "xkb_variant" "latin9"
[    23.839] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[    23.839] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    23.839] (II) Using input driver 'evdev' for 'Video Bus'
[    23.839] (**) Video Bus: always reports core events
[    23.839] (**) evdev: Video Bus: Device: "/dev/input/event6"
[    23.839] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    23.839] (--) evdev: Video Bus: Found keys
[    23.839] (II) evdev: Video Bus: Configuring as keyboard
[    23.839] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6/event6"
[    23.839] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    23.839] (**) Option "xkb_rules" "evdev"
[    23.840] (**) Option "xkb_model" "pc105"
[    23.840] (**) Option "xkb_layout" "fr"
[    23.840] (**) Option "xkb_variant" "latin9"
[    23.840] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    23.840] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    23.840] (II) Using input driver 'evdev' for 'Power Button'
[    23.840] (**) Power Button: always reports core events
[    23.840] (**) evdev: Power Button: Device: "/dev/input/event3"
[    23.840] (--) evdev: Power Button: Vendor 0 Product 0x1
[    23.840] (--) evdev: Power Button: Found keys
[    23.840] (II) evdev: Power Button: Configuring as keyboard
[    23.840] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event3"
[    23.840] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[    23.840] (**) Option "xkb_rules" "evdev"
[    23.840] (**) Option "xkb_model" "pc105"
[    23.840] (**) Option "xkb_layout" "fr"
[    23.840] (**) Option "xkb_variant" "latin9"
[    23.841] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event0)
[    23.841] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[    23.841] (II) Using input driver 'evdev' for 'Logitech USB Keyboard'
[    23.841] (**) Logitech USB Keyboard: always reports core events
[    23.841] (**) evdev: Logitech USB Keyboard: Device: "/dev/input/event0"
[    23.841] (--) evdev: Logitech USB Keyboard: Vendor 0x46d Product 0xc31c
[    23.841] (--) evdev: Logitech USB Keyboard: Found keys
[    23.842] (II) evdev: Logitech USB Keyboard: Configuring as keyboard
[    23.842] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input0/event0"
[    23.842] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 9)
[    23.842] (**) Option "xkb_rules" "evdev"
[    23.842] (**) Option "xkb_model" "pc105"
[    23.842] (**) Option "xkb_layout" "fr"
[    23.842] (**) Option "xkb_variant" "latin9"
[    23.842] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event1)
[    23.842] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[    23.842] (II) Using input driver 'evdev' for 'Logitech USB Keyboard'
[    23.842] (**) Logitech USB Keyboard: always reports core events
[    23.842] (**) evdev: Logitech USB Keyboard: Device: "/dev/input/event1"
[    23.842] (--) evdev: Logitech USB Keyboard: Vendor 0x46d Product 0xc31c
[    23.842] (--) evdev: Logitech USB Keyboard: Found absolute axes
[    23.842] (II) evdev: Logitech USB Keyboard: Forcing absolute x/y axes to exist.
[    23.842] (--) evdev: Logitech USB Keyboard: Found keys
[    23.843] (II) evdev: Logitech USB Keyboard: Forcing relative x/y axes to exist.
[    23.843] (II) evdev: Logitech USB Keyboard: Configuring as mouse
[    23.843] (II) evdev: Logitech USB Keyboard: Configuring as keyboard
[    23.843] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/input/input1/event1"
[    23.843] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 10)
[    23.843] (**) Option "xkb_rules" "evdev"
[    23.843] (**) Option "xkb_model" "pc105"
[    23.843] (**) Option "xkb_layout" "fr"
[    23.843] (**) Option "xkb_variant" "latin9"
[    23.843] (II) evdev: Logitech USB Keyboard: initialized for absolute axes.
[    23.843] (**) Logitech USB Keyboard: (accel) keeping acceleration scheme 1
[    23.843] (**) Logitech USB Keyboard: (accel) acceleration profile 0
[    23.843] (**) Logitech USB Keyboard: (accel) acceleration factor: 2.000
[    23.843] (**) Logitech USB Keyboard: (accel) acceleration threshold: 4
[    23.843] (II) config/udev: Adding input device Logitech USB RECEIVER (/dev/input/event2)
[    23.843] (**) Logitech USB RECEIVER: Applying InputClass "evdev pointer catchall"
[    23.844] (II) Using input driver 'evdev' for 'Logitech USB RECEIVER'
[    23.844] (**) Logitech USB RECEIVER: always reports core events
[    23.844] (**) evdev: Logitech USB RECEIVER: Device: "/dev/input/event2"
[    23.844] (--) evdev: Logitech USB RECEIVER: Vendor 0x46d Product 0xc50e
[    23.844] (--) evdev: Logitech USB RECEIVER: Found 20 mouse buttons
[    23.844] (--) evdev: Logitech USB RECEIVER: Found scroll wheel(s)
[    23.844] (--) evdev: Logitech USB RECEIVER: Found relative axes
[    23.844] (--) evdev: Logitech USB RECEIVER: Found x and y relative axes
[    23.844] (II) evdev: Logitech USB RECEIVER: Configuring as mouse
[    23.844] (II) evdev: Logitech USB RECEIVER: Adding scrollwheel support
[    23.844] (**) evdev: Logitech USB RECEIVER: YAxisMapping: buttons 4 and 5
[    23.844] (**) evdev: Logitech USB RECEIVER: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    23.844] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input2/event2"
[    23.844] (II) XINPUT: Adding extended input device "Logitech USB RECEIVER" (type: MOUSE, id 11)
[    23.844] (II) evdev: Logitech USB RECEIVER: initialized for relative axes.
[    23.844] (**) Logitech USB RECEIVER: (accel) keeping acceleration scheme 1
[    23.844] (**) Logitech USB RECEIVER: (accel) acceleration profile 0
[    23.844] (**) Logitech USB RECEIVER: (accel) acceleration factor: 2.000
[    23.844] (**) Logitech USB RECEIVER: (accel) acceleration threshold: 4
[    23.844] (II) config/udev: Adding input device Logitech USB RECEIVER (/dev/input/mouse0)
[    23.844] (II) No input driver specified, ignoring this device.
[    23.844] (II) This device may have been added with another device file.
[    23.845] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event7)
[    23.845] (II) No input driver specified, ignoring this device.
[    23.845] (II) This device may have been added with another device file.
[    23.845] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[    23.845] (II) No input driver specified, ignoring this device.
[    23.845] (II) This device may have been added with another device file.
[    25.153] (II) intel(0): EDID vendor "IVM", prod id 22042
[    25.154] (II) intel(0): Using EDID range info for horizontal sync
[    25.154] (II) intel(0): Using EDID range info for vertical refresh
[    25.154] (II) intel(0): Printing DDC gathered Modelines:
[    25.154] (II) intel(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    25.154] (II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    25.154] (II) intel(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    25.154] (II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    25.154] (II) intel(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[    25.154] (II) intel(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    25.154] (II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    25.154] (II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    25.154] (II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    25.154] (II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    25.154] (II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    25.154] (II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    25.154] (II) intel(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    25.154] (II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    25.154] (II) intel(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    25.154] (II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    25.154] (II) intel(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[    25.154] (II) intel(0): Modeline "1600x1200"x0.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[    25.154] (II) intel(0): Modeline "1440x900"x0.0   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[    25.154] (II) intel(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[    25.154] (II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    25.154] (II) intel(0): Modeline "1440x900"x0.0  136.75  1440 1536 1688 1936  900 903 909 942 -hsync +vsync (70.6 kHz e)
[    25.154] (II) intel(0): Modeline "1920x1080"x60.0  172.80  1920 2040 2248 2576  1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[    33.740] (II) AIGLX: Suspending AIGLX clients for VT switch

Hors ligne

#10 26-11-2016 20:47:39

robert2a
Membre
Lieu : France
Distrib. : Stretch 9
Noyau : Linux 4.9.0-3 4.9.30-2
(G)UI : Mate
Inscription : 15-11-2014

Re : [resolu] Pas d'écran de login suite à la migration vers debian jessie

a priori tu n'a pas finit le dist-upgrade


[    23.405] Current Operating System: Linux amsq-serveur2 3.2.0-4-amd64 #1 SMP Debian 3.2.82-1 x86_64
[    23.405] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=07428370-9acd-4a5e-86c1-834e88e76834 ro quiet
 



avec jessie tu devrais etre en 3.16 et pas 3.2 pour la version du noyau , si tu peut renseigner ton profil sur le forum ça aide wink
sinon tu utilise le driver intel "xserver-xorg-video-intel"

que donne en console :


apt-get update
 




apt-get dist-upgrade
 



avec un sources.list correct je pense ?  ( /etc/apt/sources.list )

Dernière modification par robert2a (26-11-2016 20:57:18)

Hors ligne

#11 26-11-2016 20:53:49

ratm54
Membre
Inscription : 26-11-2016

Re : [resolu] Pas d'écran de login suite à la migration vers debian jessie

Dans dmesg il y a :

[drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call failed



Dans Xorg :

Integrated Graphics Chipset: Intel(R) HD Graphics 2500

Hors ligne

#12 26-11-2016 21:02:38

robert2a
Membre
Lieu : France
Distrib. : Stretch 9
Noyau : Linux 4.9.0-3 4.9.30-2
(G)UI : Mate
Inscription : 15-11-2014

Re : [resolu] Pas d'écran de login suite à la migration vers debian jessie

regarde le post au dessus et finit la mise a jour vers jessie ton noyau doit passer a la version 3.16


uname -a
 

Hors ligne

#13 27-11-2016 11:17:04

ratm54
Membre
Inscription : 26-11-2016

Re : [resolu] Pas d'écran de login suite à la migration vers debian jessie

Le problème était bien lié à la version du noyau en 3.2 à la place de la 3.16. Bien vu !

la commande

apt-get dist-upgrade



n'upgradait pas la version du noyau ...

Un petit

apt-get install linux-image-3.16.0-4-amd64 linux-headers-3.16.0-4-amd64



a résolu le problème !

Un grand merci à ceux qui m'ont aidé !

Question subsidiaire, comment passe on le fil à résolu ?

Dernière modification par ratm54 (27-11-2016 11:18:10)

Hors ligne

#14 27-11-2016 11:36:15

raleur
Membre
Inscription : 03-10-2014

Re : [resolu] Pas d'écran de login suite à la migration vers debian jessie

ratm54 a écrit :

apt-get dist-upgrade


n'upgradait pas la version du noyau


Probablement parce que le méta-paquet linux-image-amd64 n'est pas installé. C'est lui qui tire la dernière version disponible du noyau.

Note : pas besoin de linux-headers si tu ne compiles pas des pilotes ou programmes en lien avec le noyau.

Hors ligne

#15 27-11-2016 11:51:46

ratm54
Membre
Inscription : 26-11-2016

Re : [resolu] Pas d'écran de login suite à la migration vers debian jessie

Effectivement le paquet  linux-image-amd64 n'était pas installé ...
Cette machine étant un serveur (donc pas de dev dessus ni de recompilation de noyau) j'ai retiré linux-headers-3.16.0-4-amd64.

Encore merci !

Hors ligne

#16 27-11-2016 14:13:53

robert2a
Membre
Lieu : France
Distrib. : Stretch 9
Noyau : Linux 4.9.0-3 4.9.30-2
(G)UI : Mate
Inscription : 15-11-2014

Re : [resolu] Pas d'écran de login suite à la migration vers debian jessie

ratm54 a écrit :



Question subsidiaire, comment passe on le fil à résolu ?



Bonjour

tu ouvre ton premier post (en #1 ) et dans le titre tu ajoute [resolu]

Hors ligne

Pied de page des forums