Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#1 09-09-2017 22:01:23

savana
Membre
Inscription : 09-09-2017

[Résolu] Une question me brule les lèvres ... volume-raid0-btrfs perdu

Salut tous le monde hmm

J'ai un souci et donc une question qui me 'turlupine'
ouais j'aime bien ce mot woohoo.gif

bon voila le problème à résoudre...kernal_panic.gif

J'ai un syno ds412+
j'y ai installé 2 x 4 To WD Red - RAID0 - btfrs
Je les ais initialisés via DSM 6.1.3
J'ai récupérer mes fichiers sur ma sauvegarde, un ds411j
une fois fais ceci j'ai modifié mes disk de ds411j donc plus de sauvegarde...
quand j'ai redémarré le ds412+ .... horreur le syno me dit que les disks sont à initialisé !!!!

moi qui depuis des années a un syno de sauvegarde
l'enchainement des situation à fait que .... j'ai merdé !!! mais un redémarrage ne m'avait jamais fais perdre un volume !?
visiblement quand je fait un fdisk -l j'ai bien les disks et partitions donc à priori les données si précieuses sont toujours la...

pour essayé de me débrouiller tous seul comme un grand, j'ai enlevé mes 2 WD de 4To pour ne pas prendre de risque.
j'ai réinstallé 2 autres 4To WD et les ai préparé de la même manière :  2 x 4 To WD Red - RAID0 - btfrs

je me suis dit en regardant dans un fichier de configuration du syno pour le volume que je viens de crée avec les 2 nouveaux disk préparé exactement identique
aux 2 premier je vais pouvoir reconfigurer le volume perdu de mes 2 premier disk ?

je pensais que j'allais retrouvé ds fstab ou autre fichiers la configuration du volume crée et que j'aurais juste à faire un copier coller avec quelques modif pour retrouver le volume des disk sda et sdb

la seule chose qui change c'est que les 2 premiers était en sda et sdb sinon les partoches sont les même que celle des disk 3 & 4 sdc et sdd.
voici le résultat de  :  fdisk -l

si vous savez ou je peux redéclarer un volume avec les bonnes info pour récupérer le volume des disk 1 & 2
vous me sauvez pas la vie mais pas mal de To de bonheur et de souvenir.

------------------- 4to + 4to  hdd 3 & 4  -------------------------------------------------

Disk /dev/sdc: 3.7 TiB, 4000787030016 bytes, 7814037168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Disk identifier: ...

Device       Start        End    Sectors  Size Type
/dev/sdc1     2048    4982527    4980480  2.4G Linux RAID
/dev/sdc2  4982528    9176831    4194304    2G Linux RAID
/dev/sdc3  9437184 7813832351 7804395168  3.6T Linux RAID


Disk /dev/sdd: 3.7 TiB, 4000787030016 bytes, 7814037168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Disk identifier: ...

Device       Start        End    Sectors  Size Type
/dev/sdd1     2048    4982527    4980480  2.4G Linux RAID
/dev/sdd2  4982528    9176831    4194304    2G Linux RAID
/dev/sdd3  9437184 7813832351 7804395168  3.6T Linux RAID


Disk /dev/md0: 2.4 GiB, 2549940224 bytes, 4980352 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/md1: 2 GiB, 2147418112 bytes, 4194176 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/zram0: 297 MiB, 311427072 bytes, 76032 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/zram1: 297 MiB, 311427072 bytes, 76032 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


GPT PMBR size mismatch (225279 != 250879) will be corrected by w(rite).
Disk /dev/synoboot: 122.5 MiB, 128450560 bytes, 250880 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: ...

Device         Start    End Sectors  Size Type
/dev/synoboot1    63  32129   32067 15.7M EFI System
/dev/synoboot2 32130 224909  192780 94.1M EFI System


Disk /dev/md2: 7.3 TiB, 7991698522112 bytes, 15608786176 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 65536 bytes / 131072 bytes



Edit à toto :
Mis l'énoncé de la configuration sous balise Autre code du forum pour que ce soit plus lisible.

Dernière modification par savana (11-09-2017 18:31:51)

Hors ligne

#2 09-09-2017 23:01:56

raleur
Membre
Inscription : 03-10-2014

Re : [Résolu] Une question me brule les lèvres ... volume-raid0-btrfs perdu

C'est quoi, "syno" et "DSM" ? C'est du Debian ? Du Linux ?

savana a écrit :

J'ai récupérer mes fichiers sur ma sauvegarde, un ds411j
une fois fais ceci j'ai modifié mes disk de ds411j donc plus de sauvegarde


Donc rien de grave, si tu n'as pas gardé de sauvegarde c'est que ces fichiers n'étaient pas très importants ?

Apparemment il y a 3 partitions RAID sur chaque disque et 3 ensembles RAID actifs.
Que contient /proc/mdstat ?
Que dit blkid ?

Hors ligne

#3 09-09-2017 23:12:21

savana
Membre
Inscription : 09-09-2017

Re : [Résolu] Une question me brule les lèvres ... volume-raid0-btrfs perdu

salut raleur wink

syno c'est synology qui tourne en debian ou variante proche et dsm c'est la version du gestionnaire graphique de synology.
pour dire que la sauvegarde que j'ai récupéré sur les 2 premier WD à été effacer des disques de sauvegarde donc il ne me reste plus que
les 2 disques avec les partitions mais plus de volume.

/proc/mdstat :

Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4]
md2 : active raid0 sdd3[1] sdc3[0]
      7804393088 blocks super 1.2 64k chunks [2/2] [UU]
     
md1 : active raid1 sdc2[0] sdd2[1]
      2097088 blocks [4/2] [UU__]
     
md0 : active raid1 sdc1[0] sdd1[1]
      2490176 blocks [4/2] [UU__]
     
unused devices: <none>



Edit à toto :
Mis la configuration sous la balise Autre code du forum. Tu peux éditer ce message pour voir le résultat.

Hors ligne

#4 09-09-2017 23:18:26

savana
Membre
Inscription : 09-09-2017

Re : [Résolu] Une question me brule les lèvres ... volume-raid0-btrfs perdu

un fdisk -l si cela peux aider avec les 4 disks :

groupe des disk raid0,btrfs sans volume de monté et à récupérer
------
sda
sdb
------

groupe des disk raid0,btrfs volume monté
------
sdc
sdd
------

Hors ligne

#5 09-09-2017 23:20:35

savana
Membre
Inscription : 09-09-2017

Re : [Résolu] Une question me brule les lèvres ... volume-raid0-btrfs perdu

c'est ce que j'ai dans fstab actuel

none /proc proc defaults 0 0
/dev/root / ext4 defaults 1 1
/dev/md2 /volume1 btrfs nospace_cache,synoacl,relatime 0 0



Edit à toto :
Mis la configuration sous la balise Autre code du forum. Tu peux éditer ce message pour voir le résultat.

Hors ligne

#6 09-09-2017 23:23:11

raleur
Membre
Inscription : 03-10-2014

Re : [Résolu] Une question me brule les lèvres ... volume-raid0-btrfs perdu

Apparemment l'ensemble RAID 0 /dev/md2 qui regroupe /dev/sdc3 et /dev/sdd3 est actif.
Les deux ensembles RAID 1 aussi, mais il leur manque 2 membres sur 4.

Si j'ai bien compris, /dev/md2 est censé contenir un système de fichiers btrfs. A vérifier avec

blkid /dev/md2
file -s /dev/md2


As-tu essayé de le monter quelque part ?

Dernière modification par raleur (09-09-2017 23:23:30)

Hors ligne

#7 09-09-2017 23:30:34

raleur
Membre
Inscription : 03-10-2014

Re : [Résolu] Une question me brule les lèvres ... volume-raid0-btrfs perdu

En relisant j'ai un doute : les disques contenant les fichiers perdus sont bien sdc et sdd ?

Hors ligne

#8 09-09-2017 23:35:04

savana
Membre
Inscription : 09-09-2017

Re : [Résolu] Une question me brule les lèvres ... volume-raid0-btrfs perdu

il n'y a plus le volume avec sda et sdb en raid0 mais les partitions sont encore la...ya de l'espoire wink


blkid /dev/md2


-ash: file: command not found




file -s /dev/md2


-ash: file: command not found





sinon j'ai essayé ça :

 mount -o,ro -t ext4 /dev/sda3 /volume1/m1


mount: wrong fs type, bad option, bad superblock on /dev/sda3,
       missing codepage or helper program, or other error

       In some cases useful info is found in syslog - try
       dmesg | tail or so.



Edit à toto :
Mis (tant bien que mal) les commandes et leurs retours en balise Commande root et user. Tu peux éditer ce post par Modifier au bas de celui-ci pour voir comment c'est fait.

Hors ligne

#9 09-09-2017 23:36:33

savana
Membre
Inscription : 09-09-2017

Re : [Résolu] Une question me brule les lèvres ... volume-raid0-btrfs perdu

raleur a écrit :

En relisant j'ai un doute : les disques contenant les fichiers perdus sont bien sdc et sdd ?



non, les disk en raid0 a remonté sont sda et sdb

Hors ligne

#10 09-09-2017 23:41:59

savana
Membre
Inscription : 09-09-2017

Re : [Résolu] Une question me brule les lèvres ... volume-raid0-btrfs perdu

mais je peux monter la partition sda1

mount -o,ro -t ext4 /dev/sda1 /volume1/m1



puis dir :


root@NAS2:/volume1#

dir m1


total 92
drwxr-xr-x 22 root root 4096 Sep  7 20:53 .
drwxr-xr-x  1 root root  100 Sep  9 22:18 ..
-rw-------  1 root root  840 Aug 31 03:17 autoupd@te.info
lrwxrwxrwx  1 root root    7 Aug  8 18:42 bin -> usr/bin
drwx------  2 root root 4096 Aug  8 18:43 config
drwxr-xr-x  3 root root 4096 Aug  8 18:42 dev
drwxr-xr-x 45 root root 4096 Sep  7 21:00 etc
drwxr-xr-x 42 root root 4096 Aug  8 18:42 etc.defaults
drwxr-xr-x  2 root root 4096 Jul 13 00:49 initrd
lrwxrwxrwx  1 root root    7 Aug  8 18:42 lib -> usr/lib
lrwxrwxrwx  1 root root    9 Aug  8 18:42 lib32 -> usr/lib32
lrwxrwxrwx  1 root root    7 Aug  8 18:42 lib64 -> usr/lib
drwx------  2 root root 4096 Jul 13 00:49 lost+found
drwxr-xr-x  2 root root 4096 Jul 13 00:49 mnt
drwxr-xr-x  2 root root 4096 Aug  8 18:42 .old_patch_info
drwxr-xr-x  2 root root 4096 Jul 13 00:49 proc
-rw-------  1 root root 1024 Aug  8 18:42 .rnd
drwx------  3 root root 4096 Sep  4 20:04 root
drwxr-xr-x 10 root root 4096 Aug  8 18:42 run
lrwxrwxrwx  1 root root    8 Aug  8 18:42 sbin -> usr/sbin
drwxr-xr-x  4 root root 4096 Aug  8 18:42 .syno
dr-xr-xr-x  2 root root 4096 Jul 13 00:49 sys
drwxr-xr-x  2 root root 4096 Aug  8 18:42 .system_info
drwxrwxrwx  2 root root 4096 Sep  7 20:53 tmp
drwxr-xr-x 11 root root 4096 Jul 12 23:40 usr
drwxr-xr-x 16 root root 4096 Sep  7 21:06 var
drwxr-xr-x 14 root root 4096 Aug  8 18:42 var.defaults
drwxrwxrwx  2 root root 4096 Jul 13 00:49 volume1
drwxr-xr-x  2 root root 4096 Sep  1 20:14 volume2

ça c'est sur la partition 1 de sda
c'est la seule que je peux lire
les 2 autre le retour est :

mount: wrong fs type, bad option, bad superblock on /dev/sda3,
       missing codepage or helper program, or other error

       In some cases useful info is found in syslog - try
       dmesg | tail or so.



il doit manqué la définition de superblock mais c'est la meme que sdc et sdd puisque j'ai fait le même montage : raid0,btrfs
avec dans fstab :

none /proc proc defaults 0 0
/dev/root / ext4 defaults 1 1
/dev/md2 /volume1 btrfs nospace_cache,synoacl,relatime 0 0



Edit à toto :
Mis les balises adaptées aux commandes et retours.

Hors ligne

#11 09-09-2017 23:43:31

raleur
Membre
Inscription : 03-10-2014

Re : [Résolu] Une question me brule les lèvres ... volume-raid0-btrfs perdu

Alors pourquoi tu nous montres sdc et sdd ?

Un peu de recherche

cat /etc/mdadm/mdadm.conf
mdadm --verbose --examine /dev/sd[ab]*



savana a écrit :

blkid /dev/md2
-ash: file: command not found


Pas cohérent, si tu tapes "blkid" ça ne peut pas répondre "file".

Dernière modification par raleur (10-09-2017 10:23:53)

Hors ligne

#12 09-09-2017 23:52:04

savana
Membre
Inscription : 09-09-2017

Re : [Résolu] Une question me brule les lèvres ... volume-raid0-btrfs perdu

ya t'il un fichier ou le volume est déclaré avec les info des partitions et du raid0,btrfs ?

sdc et sdd sont les 2 wd que j'ai rajouté pour les configuré de manière identique afin de pouvoir comprendre et reproduire la configuration de volume.
sda et sdb son les deux disk que je dois reconfiguré pour retrouver un volume en raid0

copie du shell avec la commande : blkid /dev/md2

root@NAS2:/#

blkid /dev/md2


-ash: blkid: command not found
root@NAS2:/#



Edit à toto :
Mis les balises du forum

Hors ligne

#13 09-09-2017 23:55:27

savana
Membre
Inscription : 09-09-2017

Re : [Résolu] Une question me brule les lèvres ... volume-raid0-btrfs perdu

si j'ai bien compris les partitions sda1 et sdb1 sont en ext4 et sda2/sda3 et sdb2/sdb3 sont elles en btrfs
c'est pour ca que je peux les monter avec :

mount -o,ro -t ext4 /dev/sda3 /volume1/m1



Edit à toto :
Mis les balises du forum

Dernière modification par savana (09-09-2017 23:56:23)

Hors ligne

#14 10-09-2017 00:02:22

savana
Membre
Inscription : 09-09-2017

Re : [Résolu] Une question me brule les lèvres ... volume-raid0-btrfs perdu

dans le fstab ya :

none /proc proc defaults 0 0
/dev/root / ext4 defaults 1 1
/dev/md2 /volume1 btrfs nospace_cache,synoacl,relatime 0 0



on ne peux pas l'utilisé pour faire la même chose sur sda et sdb ?
et en utilisant ce que tu ma indiqué ? :

/proc/mdstat :

Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4]
md2 : active raid0 sdd3[1] sdc3[0]
      7804393088 blocks super 1.2 64k chunks [2/2] [UU]
     
md1 : active raid1 sdc2[0] sdd2[1]
      2097088 blocks [4/2] [UU__]
     
md0 : active raid1 sdc1[0] sdd1[1]
      2490176 blocks [4/2] [UU__]
     
unused devices: <none>



Edit à toto :
Mis les balises du forum

Hors ligne

#15 10-09-2017 00:10:01

savana
Membre
Inscription : 09-09-2017

Re : [Résolu] Une question me brule les lèvres ... volume-raid0-btrfs perdu

en tapant :

dmesg


réponse :

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.10.102 (root@build2) (gcc version 4.9.3 20150311 (prerelease) (crosstool-NG 1.20.0) ) #15152 SMP Fri Sep 1 11:15:03 CST 2017
[    0.000000] Command line: root=/dev/md0 ihd_num=4 HddHotplug=1 netif_num=2 pwrctl_pin=N0734 syno_hw_version=DS412+ macs=0011321070c9,0011321070ca,00c3d1956b82,00c3d1956b83 sn=C3KFN00315
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000] Disabled fast string operations
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003e6f8fff] usable
[    0.000000] BIOS-e820: [mem 0x000000003e6f9000-0x000000003e6fafff] reserved
[    0.000000] BIOS-e820: [mem 0x000000003e6fb000-0x000000003e703fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000003e704000-0x000000003e70efff] usable
[    0.000000] BIOS-e820: [mem 0x000000003e70f000-0x000000003e716fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000003e717000-0x000000003e738fff] usable
[    0.000000] BIOS-e820: [mem 0x000000003e739000-0x000000003e73afff] reserved
[    0.000000] BIOS-e820: [mem 0x000000003e73b000-0x000000003f08afff] usable
[    0.000000] BIOS-e820: [mem 0x000000003f08b000-0x000000003f08efff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000003f08f000-0x000000003f092fff] usable
[    0.000000] BIOS-e820: [mem 0x000000003f093000-0x000000003f095fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000003f096000-0x000000003f096fff] usable
[    0.000000] BIOS-e820: [mem 0x000000003f097000-0x000000003f097fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000003f098000-0x000000003f09bfff] usable
[    0.000000] BIOS-e820: [mem 0x000000003f09c000-0x000000003f09cfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000003f09d000-0x000000003f09dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000003f09e000-0x000000003f09efff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000003f09f000-0x000000003f09ffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000003f0a0000-0x000000003f0a0fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000003f0a1000-0x000000003f0a5fff] usable
[    0.000000] BIOS-e820: [mem 0x000000003f0a6000-0x000000003f0a6fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000003f0a7000-0x000000003f102fff] usable
[    0.000000] BIOS-e820: [mem 0x000000003f103000-0x000000003f103fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000003f104000-0x000000003f104fff] usable
[    0.000000] BIOS-e820: [mem 0x000000003f105000-0x000000003f109fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000003f10a000-0x000000003f10afff] usable
[    0.000000] BIOS-e820: [mem 0x000000003f10b000-0x000000003f30afff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000003f30b000-0x000000003f31cfff] usable
[    0.000000] BIOS-e820: [mem 0x000000003f31d000-0x000000003f322fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000003f323000-0x000000003f324fff] usable
[    0.000000] BIOS-e820: [mem 0x000000003f325000-0x000000003f326fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000003f327000-0x000000003f32bfff] usable
[    0.000000] BIOS-e820: [mem 0x000000003f32c000-0x000000003f347fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000003f348000-0x000000003f34cfff] usable
[    0.000000] BIOS-e820: [mem 0x000000003f34d000-0x000000003f34dfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000003f34e000-0x000000003f370fff] usable
[    0.000000] BIOS-e820: [mem 0x000000003f371000-0x000000003f371fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000003f372000-0x000000003f37cfff] usable
[    0.000000] BIOS-e820: [mem 0x000000003f37d000-0x000000003f380fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000003f381000-0x000000003f381fff] usable
[    0.000000] BIOS-e820: [mem 0x000000003f382000-0x000000003f383fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000003f384000-0x000000003f390fff] usable
[    0.000000] BIOS-e820: [mem 0x000000003f391000-0x000000003f391fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000003f392000-0x000000003f393fff] usable
[    0.000000] BIOS-e820: [mem 0x000000003f394000-0x000000003f395fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000003f396000-0x000000003f3b3fff] usable
[    0.000000] BIOS-e820: [mem 0x000000003f3b4000-0x000000003f3b4fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000003f3b5000-0x000000003f3b7fff] usable
[    0.000000] BIOS-e820: [mem 0x000000003f3b8000-0x000000003f3b8fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000003f3b9000-0x000000003f3bbfff] usable
[    0.000000] BIOS-e820: [mem 0x000000003f3bc000-0x000000003f3bdfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000003f3be000-0x000000003f3ccfff] usable
[    0.000000] BIOS-e820: [mem 0x000000003f3cd000-0x000000003f3cdfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000003f3ce000-0x000000003f3d1fff] usable
[    0.000000] BIOS-e820: [mem 0x000000003f3d2000-0x000000003f3d2fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000003f3d3000-0x000000003f3d5fff] usable
[    0.000000] BIOS-e820: [mem 0x000000003f3d6000-0x000000003f3d6fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000003f3d7000-0x000000003f3d8fff] usable
[    0.000000] BIOS-e820: [mem 0x000000003f3d9000-0x000000003f3fffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000003f400000-0x000000003f400fff] usable
[    0.000000] BIOS-e820: [mem 0x000000003f401000-0x000000003f40cfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000003f40d000-0x000000003f41ffff] usable
[    0.000000] BIOS-e820: [mem 0x000000003f420000-0x000000003f42efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000003f42f000-0x000000003f448fff] usable
[    0.000000] BIOS-e820: [mem 0x000000003f449000-0x000000003f44bfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000003f44c000-0x000000003f6e7fff] usable
[    0.000000] BIOS-e820: [mem 0x000000003f6e8000-0x000000003f6e8fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000003f6e9000-0x000000003f6edfff] usable
[    0.000000] BIOS-e820: [mem 0x000000003f6ee000-0x000000003f6eefff] reserved
[    0.000000] BIOS-e820: [mem 0x000000003f6ef000-0x000000003f6effff] usable
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fff90000-0x00000000fff99fff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.30 by E
[    0.000000] efi:  ACPI=0x3f3b4000  ACPI 2.0=0x3f3b4014  SMBIOS=0x3e6fa000
[    0.000000] efi: mem00: type=4, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB)
[    0.000000] efi: mem01: type=7, attr=0xf, range=[0x0000000000001000-0x000000000007d000) (0MB)
[    0.000000] efi: mem02: type=2, attr=0xf, range=[0x000000000007d000-0x000000000007f000) (0MB)
[    0.000000] efi: mem03: type=3, attr=0xf, range=[0x000000000007f000-0x0000000000080000) (0MB)
[    0.000000] efi: mem04: type=7, attr=0xf, range=[0x0000000000080000-0x000000000009f000) (0MB)
[    0.000000] efi: mem05: type=0, attr=0xf, range=[0x000000000009f000-0x00000000000a0000) (0MB)
[    0.000000] efi: mem06: type=7, attr=0xf, range=[0x0000000000100000-0x00000000014fd000) (19MB)
[    0.000000] efi: mem07: type=4, attr=0xf, range=[0x00000000014fd000-0x0000000001900000) (4MB)
[    0.000000] efi: mem08: type=7, attr=0xf, range=[0x0000000001900000-0x000000003d74f000) (958MB)
[    0.000000] efi: mem09: type=2, attr=0xf, range=[0x000000003d74f000-0x000000003e684000) (15MB)
[    0.000000] efi: mem10: type=1, attr=0xf, range=[0x000000003e684000-0x000000003e6b9000) (0MB)
[    0.000000] efi: mem11: type=7, attr=0xf, range=[0x000000003e6b9000-0x000000003e6de000) (0MB)
[    0.000000] efi: mem12: type=4, attr=0xf, range=[0x000000003e6de000-0x000000003e6df000) (0MB)
[    0.000000] efi: mem13: type=2, attr=0xf, range=[0x000000003e6df000-0x000000003e6ed000) (0MB)
[    0.000000] efi: mem14: type=4, attr=0xf, range=[0x000000003e6ed000-0x000000003e6f9000) (0MB)
[    0.000000] efi: mem15: type=0, attr=0xf, range=[0x000000003e6f9000-0x000000003e6fb000) (0MB)
[    0.000000] efi: mem16: type=10, attr=0xf, range=[0x000000003e6fb000-0x000000003e704000) (0MB)
[    0.000000] efi: mem17: type=4, attr=0xf, range=[0x000000003e704000-0x000000003e70f000) (0MB)
[    0.000000] efi: mem18: type=0, attr=0xf, range=[0x000000003e70f000-0x000000003e717000) (0MB)
[    0.000000] efi: mem19: type=4, attr=0xf, range=[0x000000003e717000-0x000000003e739000) (0MB)
[    0.000000] efi: mem20: type=5, attr=0x800000000000000f, range=[0x000000003e739000-0x000000003e73b000) (0MB)
[    0.000000] efi: mem21: type=4, attr=0xf, range=[0x000000003e73b000-0x000000003f086000) (9MB)
[    0.000000] efi: mem22: type=3, attr=0xf, range=[0x000000003f086000-0x000000003f08b000) (0MB)
[    0.000000] efi: mem23: type=9, attr=0xf, range=[0x000000003f08b000-0x000000003f08f000) (0MB)
[    0.000000] efi: mem24: type=4, attr=0xf, range=[0x000000003f08f000-0x000000003f093000) (0MB)
[    0.000000] efi: mem25: type=10, attr=0xf, range=[0x000000003f093000-0x000000003f096000) (0MB)
[    0.000000] efi: mem26: type=4, attr=0xf, range=[0x000000003f096000-0x000000003f097000) (0MB)
[    0.000000] efi: mem27: type=9, attr=0xf, range=[0x000000003f097000-0x000000003f098000) (0MB)
[    0.000000] efi: mem28: type=4, attr=0xf, range=[0x000000003f098000-0x000000003f09c000) (0MB)
[    0.000000] efi: mem29: type=9, attr=0xf, range=[0x000000003f09c000-0x000000003f09d000) (0MB)
[    0.000000] efi: mem30: type=4, attr=0xf, range=[0x000000003f09d000-0x000000003f09e000) (0MB)
[    0.000000] efi: mem31: type=9, attr=0xf, range=[0x000000003f09e000-0x000000003f09f000) (0MB)
[    0.000000] efi: mem32: type=10, attr=0xf, range=[0x000000003f09f000-0x000000003f0a0000) (0MB)
[    0.000000] efi: mem33: type=9, attr=0xf, range=[0x000000003f0a0000-0x000000003f0a1000) (0MB)
[    0.000000] efi: mem34: type=3, attr=0xf, range=[0x000000003f0a1000-0x000000003f0a6000) (0MB)
[    0.000000] efi: mem35: type=10, attr=0xf, range=[0x000000003f0a6000-0x000000003f0a7000) (0MB)
[    0.000000] efi: mem36: type=3, attr=0xf, range=[0x000000003f0a7000-0x000000003f0b2000) (0MB)
[    0.000000] efi: mem37: type=4, attr=0xf, range=[0x000000003f0b2000-0x000000003f0b6000) (0MB)
[    0.000000] efi: mem38: type=3, attr=0xf, range=[0x000000003f0b6000-0x000000003f0b7000) (0MB)
[    0.000000] efi: mem39: type=4, attr=0xf, range=[0x000000003f0b7000-0x000000003f0b8000) (0MB)
[    0.000000] efi: mem40: type=3, attr=0xf, range=[0x000000003f0b8000-0x000000003f0bc000) (0MB)
[    0.000000] efi: mem41: type=4, attr=0xf, range=[0x000000003f0bc000-0x000000003f0bf000) (0MB)
[    0.000000] efi: mem42: type=3, attr=0xf, range=[0x000000003f0bf000-0x000000003f0cc000) (0MB)
[    0.000000] efi: mem43: type=4, attr=0xf, range=[0x000000003f0cc000-0x000000003f0cf000) (0MB)
[    0.000000] efi: mem44: type=3, attr=0xf, range=[0x000000003f0cf000-0x000000003f0d1000) (0MB)
[    0.000000] efi: mem45: type=4, attr=0xf, range=[0x000000003f0d1000-0x000000003f0d2000) (0MB)
[    0.000000] efi: mem46: type=3, attr=0xf, range=[0x000000003f0d2000-0x000000003f0de000) (0MB)
[    0.000000] efi: mem47: type=4, attr=0xf, range=[0x000000003f0de000-0x000000003f0df000) (0MB)
[    0.000000] efi: mem48: type=3, attr=0xf, range=[0x000000003f0df000-0x000000003f0ec000) (0MB)
[    0.000000] efi: mem49: type=4, attr=0xf, range=[0x000000003f0ec000-0x000000003f0ed000) (0MB)
[    0.000000] efi: mem50: type=3, attr=0xf, range=[0x000000003f0ed000-0x000000003f0f5000) (0MB)
[    0.000000] efi: mem51: type=4, attr=0xf, range=[0x000000003f0f5000-0x000000003f0f7000) (0MB)
[    0.000000] efi: mem52: type=3, attr=0xf, range=[0x000000003f0f7000-0x000000003f103000) (0MB)
[    0.000000] efi: mem53: type=10, attr=0xf, range=[0x000000003f103000-0x000000003f104000) (0MB)
[    0.000000] efi: mem54: type=4, attr=0xf, range=[0x000000003f104000-0x000000003f105000) (0MB)
[    0.000000] efi: mem55: type=10, attr=0xf, range=[0x000000003f105000-0x000000003f10a000) (0MB)
[    0.000000] efi: mem56: type=4, attr=0xf, range=[0x000000003f10a000-0x000000003f10b000) (0MB)
[    0.000000] efi: mem57: type=10, attr=0xf, range=[0x000000003f10b000-0x000000003f30b000) (2MB)
[    0.000000] efi: mem58: type=3, attr=0xf, range=[0x000000003f30b000-0x000000003f315000) (0MB)
[    0.000000] efi: mem59: type=4, attr=0xf, range=[0x000000003f315000-0x000000003f319000) (0MB)
[    0.000000] efi: mem60: type=3, attr=0xf, range=[0x000000003f319000-0x000000003f31d000) (0MB)
[    0.000000] efi: mem61: type=10, attr=0xf, range=[0x000000003f31d000-0x000000003f323000) (0MB)
[    0.000000] efi: mem62: type=4, attr=0xf, range=[0x000000003f323000-0x000000003f325000) (0MB)
[    0.000000] efi: mem63: type=5, attr=0x800000000000000f, range=[0x000000003f325000-0x000000003f327000) (0MB)
[    0.000000] efi: mem64: type=3, attr=0xf, range=[0x000000003f327000-0x000000003f329000) (0MB)
[    0.000000] efi: mem65: type=4, attr=0xf, range=[0x000000003f329000-0x000000003f32a000) (0MB)
[    0.000000] efi: mem66: type=3, attr=0xf, range=[0x000000003f32a000-0x000000003f32b000) (0MB)
[    0.000000] efi: mem67: type=4, attr=0xf, range=[0x000000003f32b000-0x000000003f32c000) (0MB)
[    0.000000] efi: mem68: type=6, attr=0x800000000000000f, range=[0x000000003f32c000-0x000000003f32d000) (0MB)
[    0.000000] efi: mem69: type=5, attr=0x800000000000000f, range=[0x000000003f32d000-0x000000003f330000) (0MB)
[    0.000000] efi: mem70: type=6, attr=0x800000000000000f, range=[0x000000003f330000-0x000000003f343000) (0MB)
[    0.000000] efi: mem71: type=5, attr=0x800000000000000f, range=[0x000000003f343000-0x000000003f348000) (0MB)
[    0.000000] efi: mem72: type=4, attr=0xf, range=[0x000000003f348000-0x000000003f34a000) (0MB)
[    0.000000] efi: mem73: type=3, attr=0xf, range=[0x000000003f34a000-0x000000003f34d000) (0MB)
[    0.000000] efi: mem74: type=6, attr=0x800000000000000f, range=[0x000000003f34d000-0x000000003f34e000) (0MB)
[    0.000000] efi: mem75: type=4, attr=0xf, range=[0x000000003f34e000-0x000000003f350000) (0MB)
[    0.000000] efi: mem76: type=3, attr=0xf, range=[0x000000003f350000-0x000000003f364000) (0MB)
[    0.000000] efi: mem77: type=4, attr=0xf, range=[0x000000003f364000-0x000000003f36a000) (0MB)
[    0.000000] efi: mem78: type=3, attr=0xf, range=[0x000000003f36a000-0x000000003f371000) (0MB)
[    0.000000] efi: mem79: type=5, attr=0x800000000000000f, range=[0x000000003f371000-0x000000003f372000) (0MB)
[    0.000000] efi: mem80: type=4, attr=0xf, range=[0x000000003f372000-0x000000003f374000) (0MB)
[    0.000000] efi: mem81: type=3, attr=0xf, range=[0x000000003f374000-0x000000003f37c000) (0MB)
[    0.000000] efi: mem82: type=4, attr=0xf, range=[0x000000003f37c000-0x000000003f37d000) (0MB)
[    0.000000] efi: mem83: type=10, attr=0xf, range=[0x000000003f37d000-0x000000003f381000) (0MB)
[    0.000000] efi: mem84: type=4, attr=0xf, range=[0x000000003f381000-0x000000003f382000) (0MB)
[    0.000000] efi: mem85: type=5, attr=0x800000000000000f, range=[0x000000003f382000-0x000000003f384000) (0MB)
[    0.000000] efi: mem86: type=3, attr=0xf, range=[0x000000003f384000-0x000000003f391000) (0MB)
[    0.000000] efi: mem87: type=6, attr=0x800000000000000f, range=[0x000000003f391000-0x000000003f392000) (0MB)
[    0.000000] efi: mem88: type=4, attr=0xf, range=[0x000000003f392000-0x000000003f394000) (0MB)
[    0.000000] efi: mem89: type=5, attr=0x800000000000000f, range=[0x000000003f394000-0x000000003f396000) (0MB)
[    0.000000] efi: mem90: type=3, attr=0xf, range=[0x000000003f396000-0x000000003f397000) (0MB)
[    0.000000] efi: mem91: type=4, attr=0xf, range=[0x000000003f397000-0x000000003f398000) (0MB)
[    0.000000] efi: mem92: type=3, attr=0xf, range=[0x000000003f398000-0x000000003f3aa000) (0MB)
[    0.000000] efi: mem93: type=4, attr=0xf, range=[0x000000003f3aa000-0x000000003f3ab000) (0MB)
[    0.000000] efi: mem94: type=3, attr=0xf, range=[0x000000003f3ab000-0x000000003f3b4000) (0MB)
[    0.000000] efi: mem95: type=9, attr=0xf, range=[0x000000003f3b4000-0x000000003f3b5000) (0MB)
[    0.000000] efi: mem96: type=4, attr=0xf, range=[0x000000003f3b5000-0x000000003f3b8000) (0MB)
[    0.000000] efi: mem97: type=10, attr=0xf, range=[0x000000003f3b8000-0x000000003f3b9000) (0MB)
[    0.000000] efi: mem98: type=3, attr=0xf, range=[0x000000003f3b9000-0x000000003f3bc000) (0MB)
[    0.000000] efi: mem99: type=5, attr=0x800000000000000f, range=[0x000000003f3bc000-0x000000003f3be000) (0MB)
[    0.000000] efi: mem100: type=4, attr=0xf, range=[0x000000003f3be000-0x000000003f3bf000) (0MB)
[    0.000000] efi: mem101: type=3, attr=0xf, range=[0x000000003f3bf000-0x000000003f3cc000) (0MB)
[    0.000000] efi: mem102: type=4, attr=0xf, range=[0x000000003f3cc000-0x000000003f3cd000) (0MB)
[    0.000000] efi: mem103: type=5, attr=0x800000000000000f, range=[0x000000003f3cd000-0x000000003f3ce000) (0MB)
[    0.000000] efi: mem104: type=4, attr=0xf, range=[0x000000003f3ce000-0x000000003f3d2000) (0MB)
[    0.000000] efi: mem105: type=5, attr=0x800000000000000f, range=[0x000000003f3d2000-0x000000003f3d3000) (0MB)
[    0.000000] efi: mem106: type=4, attr=0xf, range=[0x000000003f3d3000-0x000000003f3d5000) (0MB)
[    0.000000] efi: mem107: type=3, attr=0xf, range=[0x000000003f3d5000-0x000000003f3d6000) (0MB)
[    0.000000] efi: mem108: type=10, attr=0xf, range=[0x000000003f3d6000-0x000000003f3d7000) (0MB)
[    0.000000] efi: mem109: type=4, attr=0xf, range=[0x000000003f3d7000-0x000000003f3d9000) (0MB)
[    0.000000] efi: mem110: type=10, attr=0xf, range=[0x000000003f3d9000-0x000000003f400000) (0MB)
[    0.000000] efi: mem111: type=4, attr=0xf, range=[0x000000003f400000-0x000000003f401000) (0MB)
[    0.000000] efi: mem112: type=10, attr=0xf, range=[0x000000003f401000-0x000000003f40d000) (0MB)
[    0.000000] efi: mem113: type=4, attr=0xf, range=[0x000000003f40d000-0x000000003f420000) (0MB)
[    0.000000] efi: mem114: type=10, attr=0xf, range=[0x000000003f420000-0x000000003f42f000) (0MB)
[    0.000000] efi: mem115: type=3, attr=0xf, range=[0x000000003f42f000-0x000000003f433000) (0MB)
[    0.000000] efi: mem116: type=4, attr=0xf, range=[0x000000003f433000-0x000000003f444000) (0MB)
[    0.000000] efi: mem117: type=3, attr=0xf, range=[0x000000003f444000-0x000000003f445000) (0MB)
[    0.000000] efi: mem118: type=4, attr=0xf, range=[0x000000003f445000-0x000000003f446000) (0MB)
[    0.000000] efi: mem119: type=3, attr=0xf, range=[0x000000003f446000-0x000000003f449000) (0MB)
[    0.000000] efi: mem120: type=5, attr=0x800000000000000f, range=[0x000000003f449000-0x000000003f44a000) (0MB)
[    0.000000] efi: mem121: type=6, attr=0x800000000000000f, range=[0x000000003f44a000-0x000000003f44b000) (0MB)
[    0.000000] efi: mem122: type=5, attr=0x800000000000000f, range=[0x000000003f44b000-0x000000003f44c000) (0MB)
[    0.000000] efi: mem123: type=4, attr=0xf, range=[0x000000003f44c000-0x000000003f465000) (0MB)
[    0.000000] efi: mem124: type=3, attr=0xf, range=[0x000000003f465000-0x000000003f468000) (0MB)
[    0.000000] efi: mem125: type=4, attr=0xf, range=[0x000000003f468000-0x000000003f6e8000) (2MB)
[    0.000000] efi: mem126: type=6, attr=0x800000000000000f, range=[0x000000003f6e8000-0x000000003f6e9000) (0MB)
[    0.000000] efi: mem127: type=4, attr=0xf, range=[0x000000003f6e9000-0x000000003f6ee000) (0MB)
[    0.000000] efi: mem128: type=6, attr=0x800000000000000f, range=[0x000000003f6ee000-0x000000003f6ef000) (0MB)
[    0.000000] efi: mem129: type=4, attr=0xf, range=[0x000000003f6ef000-0x000000003f6f0000) (0MB)
[    0.000000] efi: mem130: type=11, attr=0x8000000000000000, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
[    0.000000] efi: mem131: type=11, attr=0x8000000000000000, range=[0x00000000fff90000-0x00000000fff9a000) (0MB)
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: Intel Corporation GRANITE WELL, BIOS Tiano-GraniteWell 05/27/2011
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x3f6f0 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0FFE00000 mask FFFE00000 write-protect
[    0.000000]   1 base 000000000 mask FC0000000 write-back
[    0.000000]   2 base 03F6F0000 mask FFFFF0000 uncachable
[    0.000000]   3 base 03F800000 mask FFF800000 uncachable
[    0.000000]   4 base 03F700000 mask FFFF00000 uncachable
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x019cf000, 0x019cffff] PGTABLE
[    0.000000] BRK [0x019d0000, 0x019d0fff] PGTABLE
[    0.000000] BRK [0x019d1000, 0x019d1fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x3e400000-0x3e5fffff]
[    0.000000]  [mem 0x3e400000-0x3e5fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x3c000000-0x3e3fffff]
[    0.000000]  [mem 0x3c000000-0x3e3fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x3bffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x3bffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x3e600000-0x3e6f8fff]
[    0.000000]  [mem 0x3e600000-0x3e6f8fff] page 4k
[    0.000000] BRK [0x019d2000, 0x019d2fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x3e704000-0x3e70efff]
[    0.000000]  [mem 0x3e704000-0x3e70efff] page 4k
[    0.000000] init_memory_mapping: [mem 0x3e717000-0x3e738fff]
[    0.000000]  [mem 0x3e717000-0x3e738fff] page 4k
[    0.000000] init_memory_mapping: [mem 0x3e73b000-0x3f08afff]
[    0.000000]  [mem 0x3e73b000-0x3e7fffff] page 4k
[    0.000000]  [mem 0x3e800000-0x3effffff] page 2M
[    0.000000]  [mem 0x3f000000-0x3f08afff] page 4k
[    0.000000] BRK [0x019d3000, 0x019d3fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x3f08f000-0x3f092fff]
[    0.000000]  [mem 0x3f08f000-0x3f092fff] page 4k
[    0.000000] init_memory_mapping: [mem 0x3f096000-0x3f096fff]
[    0.000000]  [mem 0x3f096000-0x3f096fff] page 4k
[    0.000000] init_memory_mapping: [mem 0x3f098000-0x3f09bfff]
[    0.000000]  [mem 0x3f098000-0x3f09bfff] page 4k
[    0.000000] init_memory_mapping: [mem 0x3f09d000-0x3f09dfff]
[    0.000000]  [mem 0x3f09d000-0x3f09dfff] page 4k
[    0.000000] init_memory_mapping: [mem 0x3f0a1000-0x3f0a5fff]
[    0.000000]  [mem 0x3f0a1000-0x3f0a5fff] page 4k
[    0.000000] init_memory_mapping: [mem 0x3f0a7000-0x3f102fff]
[    0.000000]  [mem 0x3f0a7000-0x3f102fff] page 4k
[    0.000000] init_memory_mapping: [mem 0x3f104000-0x3f104fff]
[    0.000000]  [mem 0x3f104000-0x3f104fff] page 4k
[    0.000000] init_memory_mapping: [mem 0x3f10a000-0x3f10afff]
[    0.000000]  [mem 0x3f10a000-0x3f10afff] page 4k
[    0.000000] init_memory_mapping: [mem 0x3f30b000-0x3f31cfff]
[    0.000000]  [mem 0x3f30b000-0x3f31cfff] page 4k
[    0.000000] BRK [0x019d4000, 0x019d4fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x3f323000-0x3f324fff]
[    0.000000]  [mem 0x3f323000-0x3f324fff] page 4k
[    0.000000] init_memory_mapping: [mem 0x3f327000-0x3f32bfff]
[    0.000000]  [mem 0x3f327000-0x3f32bfff] page 4k
[    0.000000] init_memory_mapping: [mem 0x3f348000-0x3f34cfff]
[    0.000000]  [mem 0x3f348000-0x3f34cfff] page 4k
[    0.000000] init_memory_mapping: [mem 0x3f34e000-0x3f370fff]
[    0.000000]  [mem 0x3f34e000-0x3f370fff] page 4k
[    0.000000] init_memory_mapping: [mem 0x3f372000-0x3f37cfff]
[    0.000000]  [mem 0x3f372000-0x3f37cfff] page 4k
[    0.000000] init_memory_mapping: [mem 0x3f381000-0x3f381fff]
[    0.000000]  [mem 0x3f381000-0x3f381fff] page 4k
[    0.000000] init_memory_mapping: [mem 0x3f384000-0x3f390fff]
[    0.000000]  [mem 0x3f384000-0x3f390fff] page 4k
[    0.000000] init_memory_mapping: [mem 0x3f392000-0x3f393fff]
[    0.000000]  [mem 0x3f392000-0x3f393fff] page 4k
[    0.000000] init_memory_mapping: [mem 0x3f396000-0x3f3b3fff]
[    0.000000]  [mem 0x3f396000-0x3f3b3fff] page 4k
[    0.000000] init_memory_mapping: [mem 0x3f3b5000-0x3f3b7fff]
[    0.000000]  [mem 0x3f3b5000-0x3f3b7fff] page 4k
[    0.000000] init_memory_mapping: [mem 0x3f3b9000-0x3f3bbfff]
[    0.000000]  [mem 0x3f3b9000-0x3f3bbfff] page 4k
[    0.000000] init_memory_mapping: [mem 0x3f3be000-0x3f3ccfff]
[    0.000000]  [mem 0x3f3be000-0x3f3ccfff] page 4k
[    0.000000] init_memory_mapping: [mem 0x3f3ce000-0x3f3d1fff]
[    0.000000]  [mem 0x3f3ce000-0x3f3d1fff] page 4k
[    0.000000] init_memory_mapping: [mem 0x3f3d3000-0x3f3d5fff]
[    0.000000]  [mem 0x3f3d3000-0x3f3d5fff] page 4k
[    0.000000] init_memory_mapping: [mem 0x3f3d7000-0x3f3d8fff]
[    0.000000]  [mem 0x3f3d7000-0x3f3d8fff] page 4k
[    0.000000] init_memory_mapping: [mem 0x3f400000-0x3f400fff]
[    0.000000]  [mem 0x3f400000-0x3f400fff] page 4k
[    0.000000] init_memory_mapping: [mem 0x3f40d000-0x3f41ffff]
[    0.000000]  [mem 0x3f40d000-0x3f41ffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x3f42f000-0x3f448fff]
[    0.000000]  [mem 0x3f42f000-0x3f448fff] page 4k
[    0.000000] init_memory_mapping: [mem 0x3f44c000-0x3f6e7fff]
[    0.000000]  [mem 0x3f44c000-0x3f6e7fff] page 4k
[    0.000000] init_memory_mapping: [mem 0x3f6e9000-0x3f6edfff]
[    0.000000]  [mem 0x3f6e9000-0x3f6edfff] page 4k
[    0.000000] init_memory_mapping: [mem 0x3f6ef000-0x3f6effff]
[    0.000000]  [mem 0x3f6ef000-0x3f6effff] page 4k
[    0.000000] RAMDISK: [mem 0x3d74f000-0x3dcf5fff]
[    0.000000] ACPI: RSDP 0x000000003F3B4014 00024 (v02 INTEL )
[    0.000000] ACPI: XSDT 0x000000003F3B4120 00044 (v01 INTEL  TIANO    00000003      01000013)
[    0.000000] ACPI: FACP 0x000000003F09E000 000F4 (v03 INTEL  TIANO    00000003 INTL 0100000D)
[    0.000000] ACPI BIOS Bug: Warning: Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20130328/tbfadt-653)
[    0.000000] ACPI: DSDT 0x000000003F08B000 03883 (v01 INTEL  GraniteW 00000003 INTL 20070508)
[    0.000000] ACPI: FACS 0x000000003F09F000 00040
[    0.000000] ACPI: APIC 0x000000003F0A0000 00078 (v01 INTEL  TIANO    00000001 MSFT 00000000)
[    0.000000] ACPI: HPET 0x000000003F09C000 00038 (v01                 00000001      00000000)
[    0.000000] ACPI: MCFG 0x000000003F097000 0003C (v01                 00000001      00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000]  [ffffea0000000000-ffffea0000dfffff] PMD -> [ffff88003c600000-ffff88003d3fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0x3e6f8fff]
[    0.000000]   node   0: [mem 0x3e704000-0x3e70efff]
[    0.000000]   node   0: [mem 0x3e717000-0x3e738fff]
[    0.000000]   node   0: [mem 0x3e73b000-0x3f08afff]
[    0.000000]   node   0: [mem 0x3f08f000-0x3f092fff]
[    0.000000]   node   0: [mem 0x3f096000-0x3f096fff]
[    0.000000]   node   0: [mem 0x3f098000-0x3f09bfff]
[    0.000000]   node   0: [mem 0x3f09d000-0x3f09dfff]
[    0.000000]   node   0: [mem 0x3f0a1000-0x3f0a5fff]
[    0.000000]   node   0: [mem 0x3f0a7000-0x3f102fff]
[    0.000000]   node   0: [mem 0x3f104000-0x3f104fff]
[    0.000000]   node   0: [mem 0x3f10a000-0x3f10afff]
[    0.000000]   node   0: [mem 0x3f30b000-0x3f31cfff]
[    0.000000]   node   0: [mem 0x3f323000-0x3f324fff]
[    0.000000]   node   0: [mem 0x3f327000-0x3f32bfff]
[    0.000000]   node   0: [mem 0x3f348000-0x3f34cfff]
[    0.000000]   node   0: [mem 0x3f34e000-0x3f370fff]
[    0.000000]   node   0: [mem 0x3f372000-0x3f37cfff]
[    0.000000]   node   0: [mem 0x3f381000-0x3f381fff]
[    0.000000]   node   0: [mem 0x3f384000-0x3f390fff]
[    0.000000]   node   0: [mem 0x3f392000-0x3f393fff]
[    0.000000]   node   0: [mem 0x3f396000-0x3f3b3fff]
[    0.000000]   node   0: [mem 0x3f3b5000-0x3f3b7fff]
[    0.000000]   node   0: [mem 0x3f3b9000-0x3f3bbfff]
[    0.000000]   node   0: [mem 0x3f3be000-0x3f3ccfff]
[    0.000000]   node   0: [mem 0x3f3ce000-0x3f3d1fff]
[    0.000000]   node   0: [mem 0x3f3d3000-0x3f3d5fff]
[    0.000000]   node   0: [mem 0x3f3d7000-0x3f3d8fff]
[    0.000000]   node   0: [mem 0x3f400000-0x3f400fff]
[    0.000000]   node   0: [mem 0x3f40d000-0x3f41ffff]
[    0.000000]   node   0: [mem 0x3f42f000-0x3f448fff]
[    0.000000]   node   0: [mem 0x3f44c000-0x3f6e7fff]
[    0.000000]   node   0: [mem 0x3f6e9000-0x3f6edfff]
[    0.000000]   node   0: [mem 0x3f6ef000-0x3f6effff]
[    0.000000] On node 0 totalpages: 259049
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 22 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 3497 pages used for memmap
[    0.000000]   DMA32 zone: 255051 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 000000003e6f9000 - 000000003e6fb000
[    0.000000] PM: Registered nosave memory: 000000003e6fb000 - 000000003e704000
[    0.000000] PM: Registered nosave memory: 000000003e70f000 - 000000003e717000
[    0.000000] PM: Registered nosave memory: 000000003e739000 - 000000003e73b000
[    0.000000] PM: Registered nosave memory: 000000003f08b000 - 000000003f08f000
[    0.000000] PM: Registered nosave memory: 000000003f093000 - 000000003f096000
[    0.000000] PM: Registered nosave memory: 000000003f097000 - 000000003f098000
[    0.000000] PM: Registered nosave memory: 000000003f09c000 - 000000003f09d000
[    0.000000] PM: Registered nosave memory: 000000003f09e000 - 000000003f09f000
[    0.000000] PM: Registered nosave memory: 000000003f09f000 - 000000003f0a0000
[    0.000000] PM: Registered nosave memory: 000000003f0a0000 - 000000003f0a1000
[    0.000000] PM: Registered nosave memory: 000000003f0a6000 - 000000003f0a7000
[    0.000000] PM: Registered nosave memory: 000000003f103000 - 000000003f104000
[    0.000000] PM: Registered nosave memory: 000000003f105000 - 000000003f10a000
[    0.000000] PM: Registered nosave memory: 000000003f10b000 - 000000003f30b000
[    0.000000] PM: Registered nosave memory: 000000003f31d000 - 000000003f323000
[    0.000000] PM: Registered nosave memory: 000000003f325000 - 000000003f327000
[    0.000000] PM: Registered nosave memory: 000000003f32c000 - 000000003f348000
[    0.000000] PM: Registered nosave memory: 000000003f34d000 - 000000003f34e000
[    0.000000] PM: Registered nosave memory: 000000003f371000 - 000000003f372000
[    0.000000] PM: Registered nosave memory: 000000003f37d000 - 000000003f381000
[    0.000000] PM: Registered nosave memory: 000000003f382000 - 000000003f384000
[    0.000000] PM: Registered nosave memory: 000000003f391000 - 000000003f392000
[    0.000000] PM: Registered nosave memory: 000000003f394000 - 000000003f396000
[    0.000000] PM: Registered nosave memory: 000000003f3b4000 - 000000003f3b5000
[    0.000000] PM: Registered nosave memory: 000000003f3b8000 - 000000003f3b9000
[    0.000000] PM: Registered nosave memory: 000000003f3bc000 - 000000003f3be000
[    0.000000] PM: Registered nosave memory: 000000003f3cd000 - 000000003f3ce000
[    0.000000] PM: Registered nosave memory: 000000003f3d2000 - 000000003f3d3000
[    0.000000] PM: Registered nosave memory: 000000003f3d6000 - 000000003f3d7000
[    0.000000] PM: Registered nosave memory: 000000003f3d9000 - 000000003f400000
[    0.000000] PM: Registered nosave memory: 000000003f401000 - 000000003f40d000
[    0.000000] PM: Registered nosave memory: 000000003f420000 - 000000003f42f000
[    0.000000] PM: Registered nosave memory: 000000003f449000 - 000000003f44c000
[    0.000000] PM: Registered nosave memory: 000000003f6e8000 - 000000003f6e9000
[    0.000000] PM: Registered nosave memory: 000000003f6ee000 - 000000003f6ef000
[    0.000000] e820: [mem 0x3f6f0000-0xfed1bfff] available for PCI devices
[    0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 24 pages/cpu @ffff88003e400000 s69184 r8192 d20928 u524288
[    0.000000] pcpu-alloc: s69184 r8192 d20928 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 255474
[    0.000000] Kernel command line: root=/dev/md0 ihd_num=4 HddHotplug=1 netif_num=2 pwrctl_pin=N0734 syno_hw_version=DS412+ macs=0011321070c9,0011321070ca,00c3d1956b82,00c3d1956b83 sn=C3KFN00315
[    0.000000] Internal HD num: 4
[    0.000000] Support HDD Hotplug.
[    0.000000] Internal netif num: 2
[    0.000000] Get sata id 7 pwrctl pin 34
[    0.000000] Synology Hardware Version: DS412+-j
[    0.000000] Serial Number: C3KFN00315
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.000000] Memory: 990200k/1039296k available (4727k kernel code, 3100k absent, 45996k reserved, 3874k data, 752k init)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  CONFIG_RCU_FANOUT set to non-default value of 32
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:4352 nr_irqs:712 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [ttyS0] enabled
[    0.000000] allocated 4194304 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.001000] tsc: Detected 2127.853 MHz processor
[    0.000005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4255.70 BogoMIPS (lpj=2127853)
[    0.010639] pid_max: default: 32768 minimum: 301
[    0.015301] init_memory_mapping: [mem 0x3e739000-0x3e73afff]
[    0.020970]  [mem 0x3e739000-0x3e73afff] page 4k
[    0.021002] init_memory_mapping: [mem 0x3f325000-0x3f326fff]
[    0.026666]  [mem 0x3f325000-0x3f326fff] page 4k
[    0.026693] init_memory_mapping: [mem 0x3f32c000-0x3f32cfff]
[    0.032357]  [mem 0x3f32c000-0x3f32cfff] page 4k
[    0.032379] init_memory_mapping: [mem 0x3f32d000-0x3f32ffff]
[    0.038040]  [mem 0x3f32d000-0x3f32ffff] page 4k
[    0.038062] init_memory_mapping: [mem 0x3f330000-0x3f342fff]
[    0.043722]  [mem 0x3f330000-0x3f342fff] page 4k
[    0.043744] init_memory_mapping: [mem 0x3f343000-0x3f347fff]
[    0.049405]  [mem 0x3f343000-0x3f347fff] page 4k
[    0.049427] init_memory_mapping: [mem 0x3f34d000-0x3f34dfff]
[    0.055089]  [mem 0x3f34d000-0x3f34dfff] page 4k
[    0.055111] init_memory_mapping: [mem 0x3f371000-0x3f371fff]
[    0.060773]  [mem 0x3f371000-0x3f371fff] page 4k
[    0.060794] init_memory_mapping: [mem 0x3f382000-0x3f383fff]
[    0.066454]  [mem 0x3f382000-0x3f383fff] page 4k
[    0.066474] init_memory_mapping: [mem 0x3f391000-0x3f391fff]
[    0.072138]  [mem 0x3f391000-0x3f391fff] page 4k
[    0.072157] init_memory_mapping: [mem 0x3f394000-0x3f395fff]
[    0.077821]  [mem 0x3f394000-0x3f395fff] page 4k
[    0.077841] init_memory_mapping: [mem 0x3f3bc000-0x3f3bdfff]
[    0.083503]  [mem 0x3f3bc000-0x3f3bdfff] page 4k
[    0.083522] init_memory_mapping: [mem 0x3f3cd000-0x3f3cdfff]
[    0.089186]  [mem 0x3f3cd000-0x3f3cdfff] page 4k
[    0.089204] init_memory_mapping: [mem 0x3f3d2000-0x3f3d2fff]
[    0.094868]  [mem 0x3f3d2000-0x3f3d2fff] page 4k
[    0.094893] init_memory_mapping: [mem 0x3f449000-0x3f449fff]
[    0.100561]  [mem 0x3f449000-0x3f449fff] page 4k
[    0.100580] init_memory_mapping: [mem 0x3f44a000-0x3f44afff]
[    0.106244]  [mem 0x3f44a000-0x3f44afff] page 4k
[    0.106263] init_memory_mapping: [mem 0x3f44b000-0x3f44bfff]
[    0.111927]  [mem 0x3f44b000-0x3f44bfff] page 4k
[    0.111946] init_memory_mapping: [mem 0x3f6e8000-0x3f6e8fff]
[    0.117609]  [mem 0x3f6e8000-0x3f6e8fff] page 4k
[    0.117626] init_memory_mapping: [mem 0x3f6ee000-0x3f6eefff]
[    0.123293]  [mem 0x3f6ee000-0x3f6eefff] page 4k
[    0.149993] Security Framework initialized
[    0.154108] AppArmor: AppArmor initialized
[    0.158231] Mount-cache hash table entries: 256
[    0.163067] Initializing cgroup subsys memory
[    0.167462] Initializing cgroup subsys devices
[    0.171919] Initializing cgroup subsys freezer
[    0.176371] Initializing cgroup subsys blkio
[    0.180685] Disabled fast string operations
[    0.184880] CPU: Physical Processor ID: 0
[    0.188897] CPU: Processor Core ID: 0
[    0.192571] mce: CPU supports 5 MCE banks
[    0.196598] CPU0: Thermal monitoring enabled (TM1)
[    0.201406] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0
               Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8
               tlb_flushall_shift: 6
[    0.215563] Freeing SMP alternatives: 24k freed
[    0.220113] ACPI: Core revision 20130328
[    0.226562] ACPI: All ACPI Tables successfully acquired
[    0.233941] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.249948] smpboot: CPU0: Intel(R) Atom(TM) CPU D2700   @ 2.13GHz (fam: 06, model: 36, stepping: 01)
[    0.360759] Performance Events: PEBS fmt0+, 8-deep LBR, Atom events, Intel PMU driver.
[    0.368770] ... version:                3
[    0.372779] ... bit width:              40
[    0.376876] ... generic registers:      2
[    0.380888] ... value mask:             000000ffffffffff
[    0.386198] ... max period:             000000007fffffff
[    0.391507] ... fixed-purpose events:   3
[    0.395519] ... event mask:             0000000700000003
[    0.417228] Disabled fast string operations
[    0.435018] Disabled fast string operations
[    0.401294] smpboot: Booting Node   0, Processors  #1 #2 #3 OK
[    0.453295] Disabled fast string operations
[    0.459667] Brought up 4 CPUs
[    0.462643] smpboot: Total of 4 processors activated (17022.82 BogoMIPS)
[    0.469821] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.478282] devtmpfs: initialized
[    0.481976] PM: Registering ACPI NVS region [mem 0x3e6fb000-0x3e703fff] (36864 bytes)
[    0.489810] PM: Registering ACPI NVS region [mem 0x3f093000-0x3f095fff] (12288 bytes)
[    0.497635] PM: Registering ACPI NVS region [mem 0x3f09f000-0x3f09ffff] (4096 bytes)
[    0.505376] PM: Registering ACPI NVS region [mem 0x3f0a6000-0x3f0a6fff] (4096 bytes)
[    0.513113] PM: Registering ACPI NVS region [mem 0x3f103000-0x3f103fff] (4096 bytes)
[    0.520848] PM: Registering ACPI NVS region [mem 0x3f105000-0x3f109fff] (20480 bytes)
[    0.528670] PM: Registering ACPI NVS region [mem 0x3f10b000-0x3f30afff] (2097152 bytes)
[    0.536723] PM: Registering ACPI NVS region [mem 0x3f31d000-0x3f322fff] (24576 bytes)
[    0.544552] PM: Registering ACPI NVS region [mem 0x3f37d000-0x3f380fff] (16384 bytes)
[    0.552374] PM: Registering ACPI NVS region [mem 0x3f3b8000-0x3f3b8fff] (4096 bytes)
[    0.560109] PM: Registering ACPI NVS region [mem 0x3f3d6000-0x3f3d6fff] (4096 bytes)
[    0.567844] PM: Registering ACPI NVS region [mem 0x3f3d9000-0x3f3fffff] (159744 bytes)
[    0.575756] PM: Registering ACPI NVS region [mem 0x3f401000-0x3f40cfff] (49152 bytes)
[    0.583579] PM: Registering ACPI NVS region [mem 0x3f420000-0x3f42efff] (61440 bytes)
[    0.591676] xor: measuring software checksum speed
[    0.605632]    prefetch64-sse:  7272.000 MB/sec
[    0.619626]    generic_sse:  6532.000 MB/sec
[    0.623894] xor: using function: prefetch64-sse (7272.000 MB/sec)
[    0.630081] NET: Registered protocol family 16
[    0.635386] ACPI: bus type PCI registered
[    0.639612] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.648928] PCI: not using MMCONFIG
[    0.652421] PCI: Using configuration type 1 for base access
[    0.667623] bio: create slab <bio-0> at 0
[    0.688656] raid6: sse2x1   gen()   183 MB/s
[    0.709580] raid6: sse2x1   xor()   919 MB/s
[    0.730610] raid6: sse2x2   gen()   539 MB/s
[    0.751572] raid6: sse2x2   xor()  1595 MB/s
[    0.772600] raid6: sse2x4   gen()   914 MB/s
[    0.793547] raid6: sse2x4   xor()  1695 MB/s
[    0.797823] raid6: using algorithm sse2x4 gen() (914 MB/s)
[    0.803304] raid6: .... xor() 1695 MB/s, rmw enabled
[    0.808268] raid6: using ssse3x2 recovery algorithm
[    0.813211] ACPI: Added _OSI(Module Device)
[    0.817401] ACPI: Added _OSI(Processor Device)
[    0.821844] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.826548] ACPI: Added _OSI(Processor Aggregator Device)
[    0.832909] ACPI: EC: Look up EC in DSDT
[    0.838392] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.844711] ACPI: Interpreter enabled
[    0.848399] ACPI: (supports S0 S4 S5)
[    0.852061] ACPI: Using IOAPIC for interrupt routing
[    0.857076] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.866586] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.876010] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.885261] ACPI: No dock devices found.
[    0.898794] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.905571] PCI host bridge to bus 0000:00
[    0.909678] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.915167] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.921350] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.927524] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.934396] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[    0.941266] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000effff]
[    0.948134] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
[    0.955006] pci_bus 0000:00: root bus resource [mem 0x3f800000-0x3fffffff]
[    0.961874] pci_bus 0000:00: root bus resource [mem 0x40000000-0xfebfffff]
[    0.968745] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
[    0.975624] pci 0000:00:00.0: [8086:0bf3] type 00 class 0x060000
[    0.975837] pci 0000:00:02.0: [8086:0be2] type 00 class 0x030000
[    0.975853] pci 0000:00:02.0: reg 10: [mem 0x40400000-0x404fffff]
[    0.975861] pci 0000:00:02.0: reg 14: [io  0x40f0-0x40f7]
[    0.976116] pci 0000:00:19.0: [8086:10e5] type 00 class 0x020000
[    0.976143] pci 0000:00:19.0: reg 10: [mem 0x40500000-0x4051ffff]
[    0.976156] pci 0000:00:19.0: reg 14: [mem 0x40524000-0x40524fff]
[    0.976168] pci 0000:00:19.0: reg 18: [io  0x40c0-0x40df]
[    0.976253] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.976441] pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
[    0.976511] pci 0000:00:1a.0: reg 20: [io  0x40a0-0x40bf]
[    0.976680] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.982477] pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
[    0.982507] pci 0000:00:1a.7: reg 10: [mem 0x40522000-0x405223ff]
[    0.982623] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.982751] pci 0000:00:1a.7: System wakeup disabled by ACPI
[    0.988532] pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
[    0.988625] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.988715] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.994525] pci 0000:00:1c.1: [8086:3a42] type 01 class 0x060400
[    0.994619] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.994711] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    1.000494] pci 0000:00:1c.2: [8086:3a44] type 01 class 0x060400
[    1.000588] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    1.000677] pci 0000:00:1c.2: System wakeup disabled by ACPI
[    1.006459] pci 0000:00:1c.3: [8086:3a46] type 01 class 0x060400
[    1.006552] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    1.006642] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    1.012417] pci 0000:00:1c.4: [8086:3a48] type 01 class 0x060400
[    1.012524] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    1.012620] pci 0000:00:1c.4: System wakeup disabled by ACPI
[    1.018399] pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
[    1.018470] pci 0000:00:1d.0: reg 20: [io  0x4080-0x409f]
[    1.018640] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    1.024418] pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
[    1.024487] pci 0000:00:1d.1: reg 20: [io  0x4060-0x407f]
[    1.024650] pci 0000:00:1d.1: System wakeup disabled by ACPI
[    1.030435] pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
[    1.030494] pci 0000:00:1d.2: reg 20: [io  0x4040-0x405f]
[    1.030655] pci 0000:00:1d.2: System wakeup disabled by ACPI
[    1.036451] pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
[    1.036482] pci 0000:00:1d.7: reg 10: [mem 0x40521000-0x405213ff]
[    1.036598] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    1.036725] pci 0000:00:1d.7: System wakeup disabled by ACPI
[    1.042506] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[    1.042742] pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100
[    1.042843] pci 0000:00:1f.0: address space collision: [io  0x0400-0x047f] conflicts with ACPI PM1a_EVT_BLK [??? 0x00000400-0x00000403 flags 0x80000000]
[    1.056487] pci 0000:00:1f.0: quirk: [io  0x0500-0x053f] claimed by ICH6 GPIO
[    1.063625] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
[    1.071419] pci 0000:00:1f.2: [8086:3a22] type 00 class 0x010601
[    1.071447] pci 0000:00:1f.2: reg 10: [io  0x40e8-0x40ef]
[    1.071460] pci 0000:00:1f.2: reg 14: [io  0x40fc-0x40ff]
[    1.071472] pci 0000:00:1f.2: reg 18: [io  0x40e0-0x40e7]
[    1.071484] pci 0000:00:1f.2: reg 1c: [io  0x40f8-0x40fb]
[    1.071496] pci 0000:00:1f.2: reg 20: [io  0x4020-0x403f]
[    1.071509] pci 0000:00:1f.2: reg 24: [mem 0x40520000-0x405207ff]
[    1.071571] pci 0000:00:1f.2: PME# supported from D3hot
[    1.071776] pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500
[    1.071801] pci 0000:00:1f.3: reg 10: [mem 0x40523000-0x405230ff 64bit]
[    1.071831] pci 0000:00:1f.3: reg 20: [io  0x4000-0x401f]
[    1.072193] pci 0000:01:00.0: [8086:10d3] type 00 class 0x020000
[    1.072226] pci 0000:01:00.0: reg 10: [mem 0x40300000-0x4031ffff]
[    1.072265] pci 0000:01:00.0: reg 18: [io  0x3000-0x301f]
[    1.072287] pci 0000:01:00.0: reg 1c: [mem 0x40320000-0x40323fff]
[    1.072455] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    1.074430] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    1.079410] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    1.079418] pci 0000:00:1c.0:   bridge window [mem 0x40300000-0x403fffff]
[    1.079615] pci 0000:02:00.0: [8086:10d3] type 00 class 0x020000
[    1.079648] pci 0000:02:00.0: reg 10: [mem 0x40200000-0x4021ffff]
[    1.079687] pci 0000:02:00.0: reg 18: [io  0x2000-0x201f]
[    1.079708] pci 0000:02:00.0: reg 1c: [mem 0x40220000-0x40223fff]
[    1.079868] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    1.081426] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    1.086408] pci 0000:00:1c.1:   bridge window [io  0x2000-0x2fff]
[    1.086416] pci 0000:00:1c.1:   bridge window [mem 0x40200000-0x402fffff]
[    1.086606] pci 0000:03:00.0: [1095:3531] type 00 class 0x018000
[    1.086643] pci 0000:03:00.0: reg 10: [mem 0x40102000-0x4010207f 64bit]
[    1.086670] pci 0000:03:00.0: reg 18: [mem 0x40100000-0x40101fff 64bit]
[    1.086688] pci 0000:03:00.0: reg 20: [io  0x1000-0x107f]
[    1.086797] pci 0000:03:00.0: supports D1 D2
[    1.088419] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    1.093401] pci 0000:00:1c.2:   bridge window [io  0x1000-0x1fff]
[    1.093409] pci 0000:00:1c.2:   bridge window [mem 0x40100000-0x401fffff]
[    1.093579] pci 0000:04:00.0: [1033:0194] type 00 class 0x0c0330
[    1.093614] pci 0000:04:00.0: reg 10: [mem 0x40000000-0x40001fff 64bit]
[    1.093775] pci 0000:04:00.0: PME# supported from D0 D3hot
[    1.095418] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    1.100400] pci 0000:00:1c.3:   bridge window [mem 0x40000000-0x400fffff]
[    1.100542] pci 0000:00:1c.4: PCI bridge to [bus 05]
[    1.105685] pci 0000:00:1e.0: PCI bridge to [bus 06] (subtractive decode)
[    1.112486] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    1.112491] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    1.112496] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    1.112500] pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[    1.112504] pci 0000:00:1e.0:   bridge window [mem 0x000e0000-0x000effff] (subtractive decode)
[    1.112508] pci 0000:00:1e.0:   bridge window [mem 0x000f0000-0x000fffff] (subtractive decode)
[    1.112512] pci 0000:00:1e.0:   bridge window [mem 0x3f800000-0x3fffffff] (subtractive decode)
[    1.112517] pci 0000:00:1e.0:   bridge window [mem 0x40000000-0xfebfffff] (subtractive decode)
[    1.112521] pci 0000:00:1e.0:   bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
[    1.112558] pci_bus 0000:00: on NUMA node 0
[    1.112691] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
[    1.118987] acpi PNP0A08:00: ACPI _OSC control (0x18) granted
[    1.125023] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    1.133043] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    1.141053] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    1.149069] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    1.157079] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    1.165086] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0
[    1.172125] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0
[    1.179159] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0
[    1.186448] ACPI: Enabled 5 GPEs in block 00 to 1F
[    1.191286] acpi root: \_SB_.PCI0 notify handler is installed
[    1.191329] Found 1 acpi root devices
[    1.191712] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=none,locks=none
[    1.199633] vgaarb: loaded
[    1.202352] vgaarb: bridge control possible 0000:00:02.0
[    1.207957] SCSI subsystem initialized
[    1.211724] ACPI: bus type ATA registered
[    1.215978] libata version 3.00 loaded.
[    1.216229] pps_core: LinuxPPS API ver. 1 registered
[    1.221199] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.230386] PTP clock support registered
[    1.234589] PCI: Using ACPI for IRQ routing
[    1.247002] PCI: pci_cache_line_size set to 64 bytes
[    1.247093] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    1.247098] e820: reserve RAM buffer [mem 0x3e6f9000-0x3fffffff]
[    1.247111] e820: reserve RAM buffer [mem 0x3e70f000-0x3fffffff]
[    1.247124] e820: reserve RAM buffer [mem 0x3e739000-0x3fffffff]
[    1.247137] e820: reserve RAM buffer [mem 0x3f08b000-0x3fffffff]
[    1.247149] e820: reserve RAM buffer [mem 0x3f093000-0x3fffffff]
[    1.247162] e820: reserve RAM buffer [mem 0x3f097000-0x3fffffff]
[    1.247174] e820: reserve RAM buffer [mem 0x3f09c000-0x3fffffff]
[    1.247186] e820: reserve RAM buffer [mem 0x3f09e000-0x3fffffff]
[    1.247198] e820: reserve RAM buffer [mem 0x3f0a6000-0x3fffffff]
[    1.247209] e820: reserve RAM buffer [mem 0x3f103000-0x3fffffff]
[    1.247221] e820: reserve RAM buffer [mem 0x3f105000-0x3fffffff]
[    1.247232] e820: reserve RAM buffer [mem 0x3f10b000-0x3fffffff]
[    1.247243] e820: reserve RAM buffer [mem 0x3f31d000-0x3fffffff]
[    1.247254] e820: reserve RAM buffer [mem 0x3f325000-0x3fffffff]
[    1.247264] e820: reserve RAM buffer [mem 0x3f32c000-0x3fffffff]
[    1.247274] e820: reserve RAM buffer [mem 0x3f34d000-0x3fffffff]
[    1.247284] e820: reserve RAM buffer [mem 0x3f371000-0x3fffffff]
[    1.247294] e820: reserve RAM buffer [mem 0x3f37d000-0x3fffffff]
[    1.247303] e820: reserve RAM buffer [mem 0x3f382000-0x3fffffff]
[    1.247312] e820: reserve RAM buffer [mem 0x3f391000-0x3fffffff]
[    1.247326] e820: reserve RAM buffer [mem 0x3f394000-0x3fffffff]
[    1.247335] e820: reserve RAM buffer [mem 0x3f3b4000-0x3fffffff]
[    1.247343] e820: reserve RAM buffer [mem 0x3f3b8000-0x3fffffff]
[    1.247351] e820: reserve RAM buffer [mem 0x3f3bc000-0x3fffffff]
[    1.247358] e820: reserve RAM buffer [mem 0x3f3cd000-0x3fffffff]
[    1.247365] e820: reserve RAM buffer [mem 0x3f3d2000-0x3fffffff]
[    1.247372] e820: reserve RAM buffer [mem 0x3f3d6000-0x3fffffff]
[    1.247378] e820: reserve RAM buffer [mem 0x3f3d9000-0x3fffffff]
[    1.247384] e820: reserve RAM buffer [mem 0x3f401000-0x3fffffff]
[    1.247390] e820: reserve RAM buffer [mem 0x3f420000-0x3fffffff]
[    1.247395] e820: reserve RAM buffer [mem 0x3f449000-0x3fffffff]
[    1.247400] e820: reserve RAM buffer [mem 0x3f6e8000-0x3fffffff]
[    1.247404] e820: reserve RAM buffer [mem 0x3f6ee000-0x3fffffff]
[    1.247408] e820: reserve RAM buffer [mem 0x3f6f0000-0x3fffffff]
[    1.247847] Switching to clocksource hpet
[    1.252045] AppArmor: AppArmor Filesystem Enabled
[    1.256930] pnp: PnP ACPI init
[    1.260017] ACPI: bus type PNP registered
[    1.264258] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[    1.270888] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    1.277507] system 00:00: [mem 0x000c0000-0x000dffff] has been reserved
[    1.284128] system 00:00: [mem 0xffe00000-0xffffffff] could not be reserved
[    1.291093] system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved
[    1.298056] system 00:00: [mem 0xfee00000-0xfeefffff] has been reserved
[    1.304676] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.305114] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.305243] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active)
[    1.305292] pnp 00:03: disabling [io  0x1180-0x119f] because it overlaps 0000:00:1c.2 BAR 7 [io  0x1000-0x1fff]
[    1.315376] pnp 00:03: disabling [io  0x1100-0x113f] because it overlaps 0000:00:1c.2 BAR 7 [io  0x1000-0x1fff]
[    1.325457] pnp 00:03: disabling [io  0x1140-0x117f] because it overlaps 0000:00:1c.2 BAR 7 [io  0x1000-0x1fff]
[    1.335551] pnp 00:03: disabling [io  0x0400-0x040f] because it overlaps 0000:00:1f.0 BAR 7 [io  0x0400-0x047f]
[    1.345634] pnp 00:03: disabling [io  0x0410-0x041f] because it overlaps 0000:00:1f.0 BAR 7 [io  0x0400-0x047f]
[    1.355864] system 00:03: [io  0x04c0-0x04ff] could not be reserved
[    1.362136] system 00:03: [io  0x0500-0x053f] has been reserved
[    1.368061] system 00:03: [io  0xefa0-0xefdf] has been reserved
[    1.373987] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.374505] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.374979] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.375109] pnp 00:06: Plug and Play ACPI device, IDs PNP0003 (active)
[    1.375138] pnp: PnP ACPI: found 7 devices
[    1.379245] ACPI: bus type PNP unregistered
[    1.397238] pci 0000:00:1f.0: BAR 7: [io  0x0400-0x047f] has bogus alignment
[    1.404293] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    1.409265] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    1.415365] pci 0000:00:1c.0:   bridge window [mem 0x40300000-0x403fffff]
[    1.422162] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    1.427135] pci 0000:00:1c.1:   bridge window [io  0x2000-0x2fff]
[    1.433238] pci 0000:00:1c.1:   bridge window [mem 0x40200000-0x402fffff]
[    1.440032] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    1.445008] pci 0000:00:1c.2:   bridge window [io  0x1000-0x1fff]
[    1.451108] pci 0000:00:1c.2:   bridge window [mem 0x40100000-0x401fffff]
[    1.457904] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    1.462881] pci 0000:00:1c.3:   bridge window [mem 0x40000000-0x400fffff]
[    1.469679] pci 0000:00:1c.4: PCI bridge to [bus 05]
[    1.474662] pci 0000:00:1e.0: PCI bridge to [bus 06]
[    1.480735] pci 0000:00:1e.0: setting latency timer to 64
[    1.480743] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    1.480748] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    1.480752] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    1.480757] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[    1.480761] pci_bus 0000:00: resource 8 [mem 0x000e0000-0x000effff]
[    1.480765] pci_bus 0000:00: resource 9 [mem 0x000f0000-0x000fffff]
[    1.480769] pci_bus 0000:00: resource 10 [mem 0x3f800000-0x3fffffff]
[    1.480774] pci_bus 0000:00: resource 11 [mem 0x40000000-0xfebfffff]
[    1.480778] pci_bus 0000:00: resource 12 [mem 0xfed40000-0xfed44fff]
[    1.480782] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    1.480796] pci_bus 0000:01: resource 1 [mem 0x40300000-0x403fffff]
[    1.480800] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    1.480804] pci_bus 0000:02: resource 1 [mem 0x40200000-0x402fffff]
[    1.480809] pci_bus 0000:03: resource 0 [io  0x1000-0x1fff]
[    1.480813] pci_bus 0000:03: resource 1 [mem 0x40100000-0x401fffff]
[    1.480817] pci_bus 0000:04: resource 1 [mem 0x40000000-0x400fffff]
[    1.480822] pci_bus 0000:06: resource 4 [io  0x0000-0x0cf7]
[    1.480826] pci_bus 0000:06: resource 5 [io  0x0d00-0xffff]
[    1.480830] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
[    1.480834] pci_bus 0000:06: resource 7 [mem 0x000c0000-0x000dffff]
[    1.480838] pci_bus 0000:06: resource 8 [mem 0x000e0000-0x000effff]
[    1.480842] pci_bus 0000:06: resource 9 [mem 0x000f0000-0x000fffff]
[    1.480847] pci_bus 0000:06: resource 10 [mem 0x3f800000-0x3fffffff]
[    1.480851] pci_bus 0000:06: resource 11 [mem 0x40000000-0xfebfffff]
[    1.480855] pci_bus 0000:06: resource 12 [mem 0xfed40000-0xfed44fff]
[    1.480957] NET: Registered protocol family 2
[    1.485702] TCP established hash table entries: 8192 (order: 5, 131072 bytes)
[    1.492907] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
[    1.499492] TCP: Hash tables configured (established 8192 bind 8192)
[    1.505914] TCP: reno registered
[    1.509162] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    1.515100] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    1.521579] NET: Registered protocol family 1
[    1.526151] RPC: Registered named UNIX socket transport module.
[    1.532081] RPC: Registered udp transport module.
[    1.536794] RPC: Registered tcp transport module.
[    1.541501] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.550553] pci 0000:04:00.0: enabling device (0000 -> 0002)
[    1.556377] PCI: CLS 64 bytes, default 64
[    1.556469] Trying to unpack rootfs image as initramfs...
[    3.898579] Freeing initrd memory: 5788k freed
[    3.938894] audit: initializing netlink socket (disabled)
[    3.944364] type=2000 audit(1504950179.211:1): initialized
[    3.957341] bounce pool size: 64 pages
[    3.963822] VFS: Disk quotas dquot_6.5.2
[    3.967865] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    3.974913] NFS: Registering the id_resolver key type
[    3.979994] Key type id_resolver registered
[    3.984187] Key type id_legacy registered
[    3.988222] msgmni has been set to 1972
[    3.992620] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    4.000056] io scheduler noop registered
[    4.003990] io scheduler deadline registered
[    4.008299] io scheduler cfq registered (default)
[    4.013394] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[    4.013784] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[    4.014195] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[    4.014697] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[    4.015612] pcieport 0000:00:1c.4: irq 44 for MSI/MSI-X
[    4.908408] tsc: Refined TSC clocksource calibration: 2127.999 MHz
[    4.914625] Switching to clocksource tsc
[    5.561963] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    5.591154] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    5.618116] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    5.781535] brd: module loaded
[    5.800146] Loading iSCSI transport class v2.0-870.
[    5.855162] ahci 0000:00:1f.2: version 3.0
[    5.855640] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
[    5.855819] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[    5.864047] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems
[    5.871983] ahci 0000:00:1f.2: setting latency timer to 64
[    5.926285] scsi0 : ahci
[    5.932846] scsi1 : ahci
[    5.941221] scsi2 : ahci
[    5.948476] scsi3 : ahci
[    5.956611] scsi4 : ahci
[    5.961483] scsi5 : ahci
[    5.967055] ata1: SATA max UDMA/133 abar m2048@0x40520000 port 0x40520100 irq 45
[    5.974514] ata2: SATA max UDMA/133 abar m2048@0x40520000 port 0x40520180 irq 45
[    5.981928] ata3: SATA max UDMA/133 abar m2048@0x40520000 port 0x40520200 irq 45
[    5.989326] ata4: SATA max UDMA/133 abar m2048@0x40520000 port 0x40520280 irq 45
[    5.996722] ata5: SATA max UDMA/133 abar m2048@0x40520000 port 0x40520300 irq 45
[    6.004121] ata6: SATA max UDMA/133 abar m2048@0x40520000 port 0x40520380 irq 45
[    6.315766] ata1: SATA link down (SStatus 0 SControl 300)
[    6.625636] ata2: SATA link down (SStatus 0 SControl 300)
[   14.981095] ata3: link is slow to respond, please be patient (ready=0)
[   16.006674] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   16.109151] ata3.00: ATA-10: WDC WD40EFRX-68N32N0, 82.00A82, max UDMA/133
[   16.115959] ata3.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[   16.123781] ata3.00: configured for UDMA/133
[   16.128731] scsi 2:0:0:0: Direct-Access     WDC      WD40EFRX-68N32N0         82.0 PQ: 0 ANSI: 5
[   16.138645] sd 2:0:0:0: [sdc] 7814037168 512-byte logical blocks: (4.00 TB/3.63 TiB)
[   16.146430] sd 2:0:0:0: [sdc] 4096-byte physical blocks
[   16.147684] Delay 5 seconds to wait for disk 4 ready.
[   16.156889] sd 2:0:0:0: [sdc] Write Protect is off
[   16.161695] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[   16.161756] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   16.207331]  sdc: sdc1 sdc2
[   16.211281] sd 2:0:0:0: [sdc] Attached SCSI disk
[   29.495968] ata4: link is slow to respond, please be patient (ready=0)
[   30.725455] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   30.833930] ata4.00: ATA-10: WDC WD40EFRX-68N32N0, 82.00A82, max UDMA/133
[   30.840748] ata4.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[   30.848583] ata4.00: configured for UDMA/133
[   30.853504] scsi 3:0:0:0: Direct-Access     WDC      WD40EFRX-68N32N0         82.0 PQ: 0 ANSI: 5
[   30.863354] sd 3:0:0:0: [sdd] 7814037168 512-byte logical blocks: (4.00 TB/3.63 TiB)
[   30.871132] sd 3:0:0:0: [sdd] 4096-byte physical blocks
[   30.876617] sd 3:0:0:0: [sdd] Write Protect is off
[   30.881435] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[   30.881543] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   30.941654]  sdd: sdd1 sdd2
[   30.945846] sd 3:0:0:0: [sdd] Attached SCSI disk
[   31.170267] ata5: SATA link down (SStatus 0 SControl 300)
[   31.480133] ata6: SATA link down (SStatus 0 SControl 300)
[   31.486367] sata_sil24 0000:03:00.0: version 1.1
[   31.486391] sata_sil24 0000:03:00.0: enabling device (0000 -> 0003)
[   31.492929] sata_sil24 0000:03:00.0: Increase sil3132 swing to 0xf
[   32.499866] scsi6 : sata_sil24
[   32.505199] ata7: SATA max UDMA/100 host m128@0x40102000 port 0x40100000 irq 18
[   32.512610] ata7: limiting SATA link speed to 1.5 Gbps
[   34.536864] ata7: SATA link down (SStatus 0 SControl 10)
[   34.548104] i8042: PNP: No PS/2 controller found. Probing ports directly.
[   35.593685] i8042: No controller found
[   35.597704] rtc_cmos 00:01: RTC can wake from S4
[   35.602798] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[   35.608952] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[   35.616382] i2c /dev entries driver
[   35.622248] coretemp coretemp.0: Unable to read TjMax from CPU 0
[   35.628325] coretemp coretemp.0: Unable to read TjMax from CPU 2
[   35.634438] it87: Found IT8728F chip at 0x6c0, revision 0
[   35.639866] it87: Beeping is supported
[   35.643840] ACPI Warning: 0x00000000000006C5-0x00000000000006C6 SystemIO conflicts with Region \_SB_.PCI0.LPC_.RTIO 1 (20130328/utaddress-249)
[   35.656665] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   35.667012] md: linear personality registered for level -1
[   35.672509] md: raid0 personality registered for level 0
[   35.677818] md: raid1 personality registered for level 1
[   35.683130] md: raid10 personality registered for level 10
[   35.688869] md: raid6 personality registered for level 6
[   35.694186] md: raid5 personality registered for level 5
[   35.699503] md: raid4 personality registered for level 4
[   35.705109] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
[   35.713558] cpuidle: using governor ladder
[   35.717659] cpuidle: using governor menu
[   35.721590] EFI Variables Facility v0.08 2004-May-17
[   35.827665] TCP: cubic registered
[   35.830993] NET: Registered protocol family 17
[   35.835487] Key type dns_resolver registered
[   35.854947] registered taskstats version 1
[   35.860353] rtc_cmos 00:01: setting system clock to 2017-09-09 09:43:35 UTC (1504950215)
[   35.870409] Freeing unused kernel memory: 752k freed
[   35.875729] Write protecting the kernel read-only data: 8192k
[   35.881828] Freeing unused kernel memory: 1404k freed
[   35.890619] Freeing unused kernel memory: 548k freed
[   36.008858] ACPI: bus type USB registered
[   36.014617] usbcore: registered new interface driver usbfs
[   36.021274] usbcore: registered new interface driver hub
[   36.026940] usbcore: registered new interface driver ethub
[   36.032799] usbcore: registered new device driver usb
[   36.062195] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   36.080006] ehci-pci: EHCI PCI platform driver
[   36.085080] ehci-pci 0000:00:1a.7: setting latency timer to 64
[   36.085100] ehci-pci 0000:00:1a.7: EHCI Host Controller
[   36.090357] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[   36.097785] ehci-pci 0000:00:1a.7: debug port 1
[   36.106231] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[   36.106264] ehci-pci 0000:00:1a.7: irq 17, io mem 0x40522000
[   36.117181] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[   36.123574] hub 1-0:1.0: USB hub found
[   36.127418] hub 1-0:1.0: 2 ports detected
[   36.132082] ehci-pci 0000:00:1d.7: setting latency timer to 64
[   36.132110] ehci-pci 0000:00:1d.7: EHCI Host Controller
[   36.137435] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[   36.144972] ehci-pci 0000:00:1d.7: debug port 1
[   36.153488] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[   36.153505] ehci-pci 0000:00:1d.7: irq 18, io mem 0x40521000
[   36.165152] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[   36.171579] hub 2-0:1.0: USB hub found
[   36.175439] hub 2-0:1.0: 6 ports detected
[   36.206200] uhci_hcd: USB Universal Host Controller Interface driver
[   36.213034] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[   36.213041] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[   36.218322] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[   36.225782] uhci_hcd 0000:00:1a.0: irq 22, io base 0x000040a0
[   36.232176] hub 3-0:1.0: USB hub found
[   36.236063] hub 3-0:1.0: 2 ports detected
[   36.240728] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[   36.240740] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[   36.246078] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[   36.253708] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00004080
[   36.260237] hub 4-0:1.0: USB hub found
[   36.264054] hub 4-0:1.0: 2 ports detected
[   36.268546] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[   36.268553] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[   36.273901] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
[   36.281456] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004060
[   36.287962] hub 5-0:1.0: USB hub found
[   36.291842] hub 5-0:1.0: 2 ports detected
[   36.296342] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[   36.296352] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[   36.301690] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
[   36.309247] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004040
[   36.315693] hub 6-0:1.0: USB hub found
[   36.319537] hub 6-0:1.0: 2 ports detected
[   36.343442] xhci_hcd 0000:04:00.0: xHCI Host Controller
[   36.348780] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 7
[   36.356434] xhci_hcd 0000:04:00.0: irq 46 for MSI/MSI-X
[   36.356446] xhci_hcd 0000:04:00.0: irq 47 for MSI/MSI-X
[   36.356457] xhci_hcd 0000:04:00.0: irq 48 for MSI/MSI-X
[   36.356467] xhci_hcd 0000:04:00.0: irq 49 for MSI/MSI-X
[   36.356477] xhci_hcd 0000:04:00.0: irq 50 for MSI/MSI-X
[   36.357002] xHCI xhci_add_endpoint called for root hub
[   36.357008] xHCI xhci_check_bandwidth called for root hub
[   36.357322] hub 7-0:1.0: USB hub found
[   36.361177] hub 7-0:1.0: 2 ports detected
[   36.365379] xhci_hcd 0000:04:00.0: xHCI Host Controller
[   36.370700] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 8
[   36.378864] xHCI xhci_add_endpoint called for root hub
[   36.378875] xHCI xhci_check_bandwidth called for root hub
[   36.379680] hub 8-0:1.0: USB hub found
[   36.383548] hub 8-0:1.0: 2 ports detected
[   36.442636] cedarview_synobios: module license 'Synology Inc.' taints kernel.
[   36.450336] Disabling lock debugging due to kernel taint
[   36.506017] usb 2-1: new high-speed USB device number 2 using ehci-pci
[   36.956888] 2017-9-9 9:43:36 UTC
[   36.960167] synobios: load, major number 201
[   36.964463] Brand: Synology
[   36.967318] Model: DS-412+
[   36.970052] This is default settings: set group disks wakeup number to 1, spinup time deno 1
[   37.478631] synobios cpu_arch proc entry initialized
[   37.483630] synobios crypto_hw proc entry initialized
[   37.488702] synobios syno_platform proc entry initialized
[   37.506105] synobios: unload
[   37.526953] md: Autodetecting RAID arrays.
[   37.564344] md: Scanned 4 and added 4 devices.
[   37.568809] md: autorun ...
[   37.571622] md: considering sdc1 ...
[   37.575214] md:  adding sdc1 ...
[   37.578459] md: sdc2 has different UUID to sdc1
[   37.583016] md:  adding sdd1 ...
[   37.586255] md: sdd2 has different UUID to sdc1
[   37.590827] md: created md0
[   37.593635] md: bind<sdd1>
[   37.596383] md: bind<sdc1>
[   37.599117] md: running: <sdc1><sdd1>
[   37.603203] md/raid1:md0: active with 2 out of 4 mirrors
[   37.608569] md0: detected capacity change from 0 to 2549940224
[   37.614647] md: considering sdc2 ...
[   37.618268] md:  adding sdc2 ...
[   37.621533] md:  adding sdd2 ...
[   37.625706] md: created md1
[   37.628557] md: bind<sdd2>
[   37.631359] md: bind<sdc2>
[   37.634141] md: running: <sdc2><sdd2>
[   37.638568] md/raid1:md1: active with 2 out of 4 mirrors
[   37.644036] md1: detected capacity change from 0 to 2147418112
[   37.650138] md: ... autorun DONE.
[   37.689431]  md0: unknown partition table
[   38.279452] EXT4-fs (md0): barriers disabled
[   38.292397] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts:
[   40.509313] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: barrier=1
[   41.241957] EXT4-fs (md0): re-mounted. Opts: (null)
[   44.556621] sd 2:0:0:0: Attached scsi generic sg0 type 0
[   44.562084] sd 3:0:0:0: Attached scsi generic sg1 type 0
[   44.933484]  md1: unknown partition table
[   45.061852] Adding 2097084k swap on /dev/md1.  Priority:-1 extents:1 across:2097084k
[   45.405275] zram: module is from the staging directory, the quality is unknown, you have been warned.
[   45.415458] zram: Created 2 device(s) ...
[   45.452293] Adding 304124k swap on /dev/zram0.  Priority:1 extents:1 across:304124k SS
[   45.482036] Adding 304124k swap on /dev/zram1.  Priority:1 extents:1 across:304124k SS
[   46.817247] NET: Registered protocol family 10
[   46.862025] sit: IPv6 over IPv4 tunneling driver
[   47.382367] init: syno-auth-check main process (4569) killed by TERM signal
[   47.952223] fuse init (API version 7.22)
[   47.987261] e1000e: Intel(R) PRO/1000 Network Driver - 3.3.4-NAPI
[   47.993377] e1000e: Copyright(c) 1999 - 2016 Intel Corporation.
[   47.999408] e1000e 0000:00:19.0: enabling device (0000 -> 0002)
[   48.005611] e1000e 0000:00:19.0: can't derive routing for PCI INT A
[   48.011911] e1000e 0000:00:19.0: PCI INT A: no GSI
[   48.016791] e1000e 0000:00:19.0: setting latency timer to 64
[   48.016879] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[   48.026262] e1000e 0000:00:19.0: irq 51 for MSI/MSI-X
[   48.510205] e1000e 0000:00:19.0: can't derive routing for PCI INT A
[   48.516545] e1000e 0000:01:00.0: enabling device (0000 -> 0002)
[   48.522712] e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[   48.532093] e1000e 0000:01:00.0: irq 51 for MSI/MSI-X
[   48.642381] e1000e 0000:01:00.0 eth0: registered PHC clock
[   48.647912] e1000e 0000:01:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:24:1d:16:5b:c5
[   48.655911] e1000e 0000:01:00.0 eth0: Intel(R) PRO/1000 Network Connection
[   48.662982] e1000e 0000:01:00.0 eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
[   48.669803] e1000e 0000:02:00.0: enabling device (0000 -> 0002)
[   48.676117] e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[   48.685570] e1000e 0000:02:00.0: irq 52 for MSI/MSI-X
[   48.795944] e1000e 0000:02:00.0 eth1: registered PHC clock
[   48.801527] e1000e 0000:02:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 00:24:1d:16:5b:c5
[   48.809555] e1000e 0000:02:00.0 eth1: Intel(R) PRO/1000 Network Connection
[   48.816597] e1000e 0000:02:00.0 eth1: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
[   48.876693] systemd-udevd[4996]: starting version 204
[   48.877235] Intel(R) Gigabit Ethernet Network Driver - version 5.3.5.3
[   48.877237] Copyright (c) 2007-2015 Intel Corporation.
[   48.925419] Loading modules backported from Linux version v3.18.1-0-g39ca484
[   48.932631] Backport generated by backports.git v3.18.1-1-0-g5e9ec4c
[   49.257409] bio: create slab <bio-1> at 1
[   49.276570] Btrfs loaded
[   50.645179] 2017-9-9 9:43:50 UTC
[   50.648516] synobios: load, major number 201
[   50.652913] Brand: Synology
[   50.655910] Model: DS-412+
[   50.658724] This is default settings: set group disks wakeup number to 1, spinup time deno 1
[   51.167880] synobios cpu_arch proc entry initialized
[   51.172962] synobios crypto_hw proc entry initialized
[   51.178138] synobios syno_platform proc entry initialized
[   52.150561] e1000e 0000:01:00.0: irq 51 for MSI/MSI-X
[   52.251478] e1000e 0000:01:00.0: irq 51 for MSI/MSI-X
[   52.252005] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   53.524439] e1000e 0000:02:00.0: irq 52 for MSI/MSI-X
[   53.624920] e1000e 0000:02:00.0: irq 52 for MSI/MSI-X
[   53.625461] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[   55.240180] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[   55.248242] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   56.338131] usb-storage 2-1:1.0: USB Mass Storage device detected
[   56.344456] scsi7 : usb-storage 2-1:1.0
[   56.348511] usbcore: registered new interface driver usb-storage
[   56.385494] usbcore: registered new interface driver usblp
[   56.433443] usbcore: registered new interface driver usbhid
[   56.439070] usbhid: USB HID core driver
[   57.006187] Syno_HddMon: Initialization completed.
[   57.013927] init: dhcp-client (eth0) main process (6862) killed by TERM signal
[   57.306253] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[   57.314180] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[   57.350312] scsi 7:0:0:0: Direct-Access     Synology Diskstation              1.0  PQ: 0 ANSI: 2
[   57.359579] sd 7:0:0:0: Attached scsi generic sg2 type 0
[   57.361311] sd 7:0:0:0: [synoboot] 250880 512-byte logical blocks: (128 MB/122 MiB)
[   57.372996] sd 7:0:0:0: [synoboot] Write Protect is off
[   57.378265] sd 7:0:0:0: [synoboot] Mode Sense: 00 00 00 00
[   57.378947] sd 7:0:0:0: [synoboot] Asking for cache data failed
[   57.384936] sd 7:0:0:0: [synoboot] Assuming drive cache: write through
[   57.394528] sd 7:0:0:0: [synoboot] Asking for cache data failed
[   57.400502] sd 7:0:0:0: [synoboot] Assuming drive cache: write through
[   57.535204] GPT:Primary header thinks Alt. header is not at the end of the disk.
[   57.542707] GPT:225279 != 250879
[   57.546015] GPT:Alternate GPT header not at the end of the disk.
[   57.552089] GPT:225279 != 250879
[   57.555373] GPT: Use GNU Parted to correct GPT errors.
[   57.560654]  synoboot: synoboot1 synoboot2
[   57.570212] sd 7:0:0:0: [synoboot] Asking for cache data failed
[   57.576237] sd 7:0:0:0: [synoboot] Assuming drive cache: write through
[   57.582925] sd 7:0:0:0: [synoboot] Attached SCSI disk
[   58.791857] init: dhcp-client (eth1) main process (7147) killed by TERM signal
[   58.806641] ata3.00: configured for UDMA/133
[   58.811048] ata3: EH complete
[   58.968424] ata4.00: configured for UDMA/133
[   58.972875] ata4: EH complete
[   66.384931] iSCSI:target_core_rodsp_server.c:1017:rodsp_server_init RODSP server started, login_key(0011321070c9).
[   66.449775] iSCSI:extent_pool.c:757:ep_init syno_extent_pool successfully initialized
[   66.496466] iSCSI:target_core_device.c:569:se_dev_align_max_sectors Rounding down aligned max_sectors from 4294967295 to 4294967288
[   66.529273] iSCSI:target_core_lunbackup.c:358:init_io_buffer_head 512 buffers allocated, total 2097152 bytes successfully
[   66.613164] iSCSI:target_core_file.c:89:fd_attach_hba RODSP plugin for fileio is enabled.
[   66.626720] iSCSI:target_core_ep.c:831:ep_attach_hba RODSP plugin for epio is enabled.
[   66.634734] iSCSI:target_core_ep.c:838:ep_attach_hba ODX Token Manager is enabled.
[   71.079510] loop: module loaded
[   74.709301] ata3.00: configured for UDMA/133
[   74.713652] ata3: EH complete
[   74.718731] ata4.00: configured for UDMA/133
[   74.723109] ata4: EH complete
[  162.051700] init: pkg-FileStation-thumbd main process (13887) killed by TERM signal
[  237.857765] md: bind<sdc3>
[  237.867105] md: bind<sdd3>
[  237.926475] md/raid0:md2: md_size is 15608786176 sectors.
[  237.931895] md: RAID0 configuration for md2 - 1 zone
[  237.936931] md: zone0=[sdc3/sdd3]
[  237.940337]       zone-offset=         0KB, device-offset=         0KB, size=7804393088KB

[  237.950162] md2: detected capacity change from 0 to 7991698522112
[  237.989019]  md2: unknown partition table
[  238.663314] BTRFS: device label 2017.09.09-09:46:58 v15152 devid 1 transid 3 /dev/md2
[  238.947218] BTRFS info (device md2): disk space caching is enabled
[  238.953428] BTRFS: has skinny extents
[  238.957119] BTRFS: flagging fs with big metadata feature
[  238.985507] BTRFS: creating UUID tree
[  239.106691] BTRFS info (device md2): setting 2 feature flag
[  239.564279] BTRFS info (device md2): disabling disk space caching
[  239.570408] BTRFS: has skinny extents
[  239.772279] BTRFS info (device md2): qgroup scan completed
[  240.094415] BTRFS info (device md2): disabling disk space caching
[  261.917406] md: md2: set sdd3 to auto_remap [1]
[  261.921980] md: md2: set sdc3 to auto_remap [1]
[  297.486666] perf interrupt took too long (2501 > 5000), lowering kernel.perf_event_max_sample_rate to 50000
[  662.056645] perf interrupt took too long (5001 > 10000), lowering kernel.perf_event_max_sample_rate to 25000
[29133.569073] md: md2: set sdd3 to auto_remap [0]
[29133.573642] md: md2: set sdc3 to auto_remap [0]
[30030.124928] init: dhcp-client (eth0) main process (7815) killed by TERM signal
[30033.744409] init: nmbd main process (4833) killed by TERM signal
[30067.137148] init: dhcp-client (eth1) main process (8468) killed by TERM signal
[30070.678177] init: nmbd main process (6359) killed by TERM signal
[38648.268364] ata1: device plugged sstatus 0x1
[38648.272688] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4050000 action 0xe frozen
[38648.280124] ata1: irq_stat 0x00000040, connection status changed
[38648.286155] ata1: SError: { PHYRdyChg CommWake DevExch }
[38648.291509] ata1: hard resetting link
[38654.064243] ata1: link is slow to respond, please be patient (ready=0)
[38656.284631] ata2: device plugged sstatus 0x1
[38656.288952] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4050000 action 0xe frozen
[38656.296395] ata2: irq_stat 0x00000040, connection status changed
[38656.302426] ata2: SError: { PHYRdyChg CommWake DevExch }
[38656.307797] ata2: hard resetting link
[38657.230965] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[38657.351823] ata1.00: ATA-10: WDC WD40EFRX-68N32N0, 82.00A82, max UDMA/133
[38657.358643] ata1.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[38657.366619] ata1.00: configured for UDMA/133
[38657.370924] ata1.00: Write Cache is enabled
[38657.375160] ata1: EH complete
[38657.378840] scsi 0:0:0:0: Direct-Access     WDC      WD40EFRX-68N32N0         82.0 PQ: 0 ANSI: 5
[38657.388143] sd 0:0:0:0: [sda] 7814037168 512-byte logical blocks: (4.00 TB/3.63 TiB)
[38657.396003] sd 0:0:0:0: [sda] 4096-byte physical blocks
[38657.401488] sd 0:0:0:0: Attached scsi generic sg3 type 0
[38657.407145] sd 0:0:0:0: [sda] Write Protect is off
[38657.412043] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[38657.412184] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[38657.482564]  sda: sda1 sda2 sda3
[38657.486877] sd 0:0:0:0: [sda] Attached SCSI disk
[38658.718883] ata1.00: configured for UDMA/133
[38658.723238] ata1: EH complete
[38662.080976] ata2: link is slow to respond, please be patient (ready=0)
[38665.145743] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[38665.266115] ata2.00: ATA-10: WDC WD40EFRX-68N32N0, 82.00A82, max UDMA/133
[38665.272927] ata2.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[38665.280788] ata2.00: configured for UDMA/133
[38665.285101] ata2.00: Write Cache is enabled
[38665.289305] ata2: EH complete
[38665.292916] scsi 1:0:0:0: Direct-Access     WDC      WD40EFRX-68N32N0         82.0 PQ: 0 ANSI: 5
[38665.302030] sd 1:0:0:0: [sdb] 7814037168 512-byte logical blocks: (4.00 TB/3.63 TiB)
[38665.302057] sd 1:0:0:0: Attached scsi generic sg4 type 0
[38665.315322] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[38665.320811] sd 1:0:0:0: [sdb] Write Protect is off
[38665.325673] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[38665.325772] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[38665.383088]  sdb: sdb1 sdb2 sdb3
[38665.387099] sd 1:0:0:0: [sdb] Attached SCSI disk
[38666.599093] ata2.00: configured for UDMA/133
[38666.603473] ata2: EH complete
[39813.008912] EXT4-fs (sda1): barriers disabled
[39813.098439] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 29656
[39813.098564] EXT4-fs (sda1): 1 orphan inode deleted
[39813.103393] EXT4-fs (sda1): recovery complete
[39813.108831] EXT4-fs (sda1): mounted filesystem with writeback data mode. Opts: data=writeback,oldalloc
[40499.201279] EXT4-fs (sda2): VFS: Can't find ext4 filesystem
[40523.460394] EXT4-fs (sda1): barriers disabled
[40523.477288] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[40572.581515] VFS: opened file in mnt_point: (/m1), file: (/)
[40572.587112] VFS: opened file in mnt_point: (/m1), file: (/)
[40572.592709] VFS: opened file in mnt_point: (/m1), file: (/)
[40584.337594] VFS: opened file in mnt_point: (/m1), file: (/)
[40618.869673] EXT4-fs (sda3): VFS: Can't find ext4 filesystem
[42560.888286] EXT4-fs (sda3): VFS: Can't find ext4 filesystem
[42842.408909] EXT4-fs (sda1): barriers disabled
[42842.425290] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[44572.821729] EXT4-fs (sda2): VFS: Can't find ext4 filesystem



Edit à toto :
Mis les balises du forum

Hors ligne

#16 10-09-2017 00:36:20

raleur
Membre
Inscription : 03-10-2014

Re : [Résolu] Une question me brule les lèvres ... volume-raid0-btrfs perdu

Ce n'est pas ce que j'ai demandé.

Hors ligne

#17 10-09-2017 00:43:30

savana
Membre
Inscription : 09-09-2017

Re : [Résolu] Une question me brule les lèvres ... volume-raid0-btrfs perdu

none /proc proc defaults 0 0
/dev/root / ext4 defaults 1 1
/dev/md2 /volume1 btrfs nospace_cache,synoacl,relatime 0 0



avec ses infos est il possible de faire un mount sur les partition en btrfs ?

Edit à toto :
Mis les balises du forum.

Hors ligne

#18 10-09-2017 05:42:30

smolski
administrateur quasi...modo
Lieu : AIN
Distrib. : 8 (jessie) 64 bits + backports
Noyau : 3.16.0-4-amd64 - 3.16.39-1
(G)UI : gnome 1:3.14+3
Inscription : 21-10-2008

Re : [Résolu] Une question me brule les lèvres ... volume-raid0-btrfs perdu

Salut savana !

À la sueur de ses petits doigts malhabiles (laaaa lalala ! - Jocke), toto t'as mis tous les posts en conformité avec les balises du forum.
À savoir que ces balises permettent à tous de mieux suivre le déroulement de la résolution proposée afin qu'elle soit pérenne, ce qui est le but de ce forum d'entraide libre.

Le lien pour les utiliser à ton tour est (choco) là :
Voir le tuto : Le code, ça pique moins les yeux en couleur

Comme le signale toto, tu peux éditer tes messages précédents par Modifier en bas à droite afin de consulter ou modifier les codes utilisés.
Cette modifications est d'ailleurs recommandées pour ne pas aligner plusieurs posts à la suite en éditant tout simplement le dernier resté sans réponse pour ajouter ces indications supplémentaires.

L'est pas belle la vie en couleur, dit ?

Bon, je ramasse mon point choco df matutinal, à bientôt pour de nouvelles z'aventures...

Tchibâââ... lol

"Théo et Adama te rappellent pourquoi Zyed et Bouna couraient…"
"L'utopie ne signifie pas l'irréalisable, mais l'irréalisée." - T Monod (source :  La zone de Siné)
"Je peux rire de tout mais pas avec n'importe qui." - P Desproges
"saque eud dun" (patois chtimi : fonce dedans)

En ligne

#19 10-09-2017 08:17:15

raleur
Membre
Inscription : 03-10-2014

Re : [Résolu] Une question me brule les lèvres ... volume-raid0-btrfs perdu

Ce n'est toujours pas ce que j'ai demandé dans le message #11.

Hors ligne

#20 10-09-2017 10:18:10

savana
Membre
Inscription : 09-09-2017

Re : [Résolu] Une question me brule les lèvres ... volume-raid0-btrfs perdu

raleur a écrit :

Ce n'est toujours pas ce que j'ai demandé dans le message #11.



pour avoir une comparaison car sdc et sdd sont configuré de la même manière que sda et sdb
je pensais que cela aiderait à comprendre la configuration des volume.

Hors ligne

#21 10-09-2017 10:22:17

raleur
Membre
Inscription : 03-10-2014

Re : [Résolu] Une question me brule les lèvres ... volume-raid0-btrfs perdu

Tu as déjà répondu à cette question, on ne va pas revenir dessus. Je parlais du résultat des commandes qui suivaient.

Hors ligne

#22 10-09-2017 10:26:00

raleur
Membre
Inscription : 03-10-2014

Re : [Résolu] Une question me brule les lèvres ... volume-raid0-btrfs perdu

Il y avait une erreur dans la seconde commande. Je l'ai corrigée, mais au cas où tu l'aurais lue avant, je les remets :

cat /etc/mdadm/mdadm.conf


mdadm --verbose --examine /dev/sd[ab]*

Hors ligne

#23 10-09-2017 21:54:52

savana
Membre
Inscription : 09-09-2017

Re : [Résolu] Une question me brule les lèvres ... volume-raid0-btrfs perdu

Merci pour vos efforts...
La solution pour ce qui en aurait besoin...

mdadm --assemble --force /dev/md123 /dev/sda3 /dev/sdb3


mkdir /mnt/md123


mount /dev/md123 /mnt/md123 -o ro



kenavo smile

Edit à toto :
Mis les commandes root dans les balises du forum Commande root.

Hors ligne

#24 10-09-2017 23:26:31

smolski
administrateur quasi...modo
Lieu : AIN
Distrib. : 8 (jessie) 64 bits + backports
Noyau : 3.16.0-4-amd64 - 3.16.39-1
(G)UI : gnome 1:3.14+3
Inscription : 21-10-2008

Re : [Résolu] Une question me brule les lèvres ... volume-raid0-btrfs perdu

Si c'est résolu alors, il faut l'indiquer dans le titre du post.
Voir le tuto : C'est résolu ! Bravo mais il faut l'indiquer dans l'titre.
smile

"Théo et Adama te rappellent pourquoi Zyed et Bouna couraient…"
"L'utopie ne signifie pas l'irréalisable, mais l'irréalisée." - T Monod (source :  La zone de Siné)
"Je peux rire de tout mais pas avec n'importe qui." - P Desproges
"saque eud dun" (patois chtimi : fonce dedans)

En ligne

Pied de page des forums