Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#1 16-09-2017 12:34:50

mcfly
Membre
Inscription : 29-04-2017

Quel pilote graphique utiliser ? (kernel panic sur Debian Stretch)

Bonjour amis du libre !

Il y a quelques mois, j'avais ouvert un topic sur un problème de plantage récurrent sur ma Debian Jessie (kernel panic).
Le problème avait été résolu et tout fonctionnait bien.

Lien de la discussion : https://debian-facile.org/viewtopic.php?id=17833

Par la suite, je suis passé à Stretch, et le problème est revenu. J'avais alors reproduit les manipulations du forum en espérant que cela résoudrait le problème, sauf qu'à l'époque j'avais uniquement endommagé le système et ma debian ne démarrait même plus (je restait bloqué dans le chargement des modules).

J'ai refais une installation fraîche du coup, et je n'ose plus toucher à rien sans consulter vos avis car je ne sais pas quel pilote installer, je suis un peu largué (nvidia, désactiver nouveau ... sos.gif)

Par où devrais-je commencer ?

Hors ligne

#2 16-09-2017 15:18:42

èfpé
Membre
Inscription : 10-07-2016

Re : Quel pilote graphique utiliser ? (kernel panic sur Debian Stretch)

Bonjour mcfly,

Installer des paquets rétroportés pour Jessie sur Stretch n'était sans doute pas idéal... mais que retourne la commande :

lspci -nnk | egrep -A3 'VGA|3D'


Les freezes dont tu parles pourraient être dus au fait que le contrôleur graphique intégré (Intel HD Graphics 5600) au processeur (Intel Core i7-5700HQ) ne parvient plus à écluser le flux graphique/vidéo, or le contrôleur graphique dédié (NVIDIA GeForce 940M) ne peut pas prendre le relais si Bumblebee n'est pas installé.

Tu as sans doute déjà installé le paquet firmware-iwlwifi, mais je ne suis pas certain que le paquet firmware-misc-nonfree soit indispensable, en fait (CPU Broadwell, NVIDIA GM108) ; attends le verdict de robert2a neutral

Dernière modification par èfpé (16-09-2017 20:28:42)

Hors ligne

#3 17-09-2017 03:03:44

mcfly
Membre
Inscription : 29-04-2017

Re : Quel pilote graphique utiliser ? (kernel panic sur Debian Stretch)

Salut èfpé ! big_smile

En effet j'ai déjà installé le paquet firmware-wilwifi.

Alors pour la commande voilà ce que ça me retourne :


00:02.0 VGA compatible controller [0300]: Intel Corporation HD Graphics 5600 [8086:1612] (rev 0a)
  Subsystem: Micro-Star International Co., Ltd. [MSI] HD Graphics 5600 [1462:114c]
  Kernel driver in use: i915
  Kernel modules: i915
--
01:00.0 3D controller [0302]: NVIDIA Corporation GM108M [GeForce 940M] [10de:1347] (rev a2)
  Subsystem: Micro-Star International Co., Ltd. [MSI] GM108M [GeForce 940M] [1462:114c]
  Kernel driver in use: nouveau
  Kernel modules: nouveau

 

Hors ligne

#4 17-09-2017 10:34:48

èfpé
Membre
Inscription : 10-07-2016

Re : Quel pilote graphique utiliser ? (kernel panic sur Debian Stretch)

Re-,

Selon cateee.net le contrôleur graphique HD Graphics 5600 (Broadwell) est pris en charge depuis la version 3.13 du noyau, ce n'était donc probablement pas ça le problème. Par ailleurs l'utilisation du pilote intel est déconseillée depuis longtemps.
Selon freedesktop.org le contrôleur graphique GeForce 940M (Maxwell) est pris en charge par nouveau mais je ne sais pas depuis quelle version. Quant à Bumblebee, sous Jessie, quel paquet avais-tu installé, bumblebee, ou bumblebee-nvidia ?

Pourrais-tu confirmer que le bureau est Xfce, le gestionnaire de connexion LightDM, et poster les retours de :

cat /var/log/Xorg.0.log

apt-cache policy libgl1-mesa-dri libgl1-mesa-glx xserver-xorg-video-intel

dmesg | grep firmware


Enfin il pourrait être intéressant d'avoir une capture photo d'écran lisible illustrant le kernel panic.

Dernière modification par èfpé (17-09-2017 11:04:48)

Hors ligne

#5 17-09-2017 15:35:14

mcfly
Membre
Inscription : 29-04-2017

Re : Quel pilote graphique utiliser ? (kernel panic sur Debian Stretch)

Rebonjour èfpé,

Pour la photo d'écran, sur Jessie c'était net j'avais vraiment l'écran avec le message, pour stretch le plus souvent c'est un freeze complet et tout redémarre tout seul au bout de 30 secondes.
Je te confirme que j'ai XFCE, pour le gestionnaire de connexion c'est également LightDM.

Voici le retour de chaque comande, attention pavé !

cat /var/log/Xorg.0.log



[     4.640]
X.Org X Server 1.19.2
Release Date: 2017-03-02
[     4.640] X Protocol Version 11, Revision 0
[     4.640] Build Operating System: Linux 4.9.0-3-amd64 x86_64 Debian
[     4.640] Current Operating System: Linux freedom 4.9.0-3-amd64 #1 SMP Debian 4.9.30-2+deb9u3 (2017-08-06) x86_64
[     4.640] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-3-amd64 root=UUID=8a4df1b0-e5ce-4323-becc-b6110f46fae6 ro quiet
[     4.641] Build Date: 07 July 2017  06:14:06AM
[     4.641] xorg-server 2:1.19.2-1+deb9u1 (https://www.debian.org/support)
[     4.641] Current version of pixman: 0.34.0
[     4.641]  Before reporting problems, check http://wiki.x.org
  to make sure that you have the latest version.
[     4.641] Markers: (--) probed, (**) from config file, (==) default setting,
  (++) from command line, (!!) notice, (II) informational,
  (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     4.641] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Sep 17 15:05:48 2017
[     4.642] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     4.644] (==) No Layout section.  Using the first Screen section.
[     4.644] (==) No screen section available. Using defaults.
[     4.644] (**) |-->Screen "Default Screen Section" (0)
[     4.644] (**) |   |-->Monitor "<default monitor>"
[     4.644] (==) No monitor specified for screen "Default Screen Section".
  Using a default monitor configuration.
[     4.644] (==) Automatically adding devices
[     4.644] (==) Automatically enabling devices
[     4.644] (==) Automatically adding GPU devices
[     4.644] (==) Max clients allowed: 256, resource mask: 0x1fffff
[     4.646] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[     4.646]  Entry deleted from font path.
[     4.650] (==) FontPath set to:
  /usr/share/fonts/X11/misc,
  /usr/share/fonts/X11/100dpi/:unscaled,
  /usr/share/fonts/X11/75dpi/:unscaled,
  /usr/share/fonts/X11/Type1,
  /usr/share/fonts/X11/100dpi,
  /usr/share/fonts/X11/75dpi,
  built-ins
[     4.650] (==) ModulePath set to "/usr/lib/xorg/modules"
[     4.650] (II) The server relies on udev to provide the list of input devices.
  If no devices become available, reconfigure udev or disable AutoAddDevices.
[     4.650] (II) Loader magic: 0x55faa3504e00
[     4.650] (II) Module ABI versions:
[     4.650]  X.Org ANSI C Emulation: 0.4
[     4.650]  X.Org Video Driver: 23.0
[     4.650]  X.Org XInput driver : 24.1
[     4.650]  X.Org Server Extension : 10.0
[     4.650] (++) using VT number 7

[     4.650] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[     4.650] (II) xfree86: Adding drm device (/dev/dri/card1)
[     4.651] (II) xfree86: Adding drm device (/dev/dri/card0)
[     4.654] (--) PCI:*(0:0:2:0) 8086:1612:1462:114c rev 10, Mem @ 0xa1000000/16777216, 0xb0000000/268435456, I/O @ 0x00005000/64, BIOS @ 0x????????/131072
[     4.654] (--) PCI: (0:1:0:0) 10de:1347:1462:114c rev 162, Mem @ 0xa2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00004000/128, BIOS @ 0x????????/524288
[     4.654] (II) LoadModule: "glx"
[     4.655] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     4.663] (II) Module glx: vendor="X.Org Foundation"
[     4.663]  compiled for 1.19.2, module version = 1.0.0
[     4.663]  ABI class: X.Org Server Extension, version 10.0
[     4.663] (==) Matched nouveau as autoconfigured driver 0
[     4.663] (==) Matched nv as autoconfigured driver 1
[     4.663] (==) Matched modesetting as autoconfigured driver 2
[     4.663] (==) Matched fbdev as autoconfigured driver 3
[     4.663] (==) Matched vesa as autoconfigured driver 4
[     4.663] (==) Assigned the driver to the xf86ConfigLayout
[     4.663] (II) LoadModule: "nouveau"
[     4.663] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[     4.665] (II) Module nouveau: vendor="X.Org Foundation"
[     4.665]  compiled for 1.19.3, module version = 1.0.13
[     4.665]  Module class: X.Org Video Driver
[     4.665]  ABI class: X.Org Video Driver, version 23.0
[     4.665] (II) LoadModule: "nv"
[     4.665] (WW) Warning, couldn't open module nv
[     4.665] (II) UnloadModule: "nv"
[     4.665] (II) Unloading nv
[     4.665] (EE) Failed to load module "nv" (module does not exist, 0)
[     4.665] (II) LoadModule: "modesetting"
[     4.665] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[     4.666] (II) Module modesetting: vendor="X.Org Foundation"
[     4.666]  compiled for 1.19.2, module version = 1.19.2
[     4.666]  Module class: X.Org Video Driver
[     4.666]  ABI class: X.Org Video Driver, version 23.0
[     4.666] (II) LoadModule: "fbdev"
[     4.666] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[     4.666] (II) Module fbdev: vendor="X.Org Foundation"
[     4.666]  compiled for 1.19.0, module version = 0.4.4
[     4.666]  Module class: X.Org Video Driver
[     4.666]  ABI class: X.Org Video Driver, version 23.0
[     4.666] (II) LoadModule: "vesa"
[     4.666] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[     4.666] (II) Module vesa: vendor="X.Org Foundation"
[     4.666]  compiled for 1.19.0, module version = 2.3.4
[     4.666]  Module class: X.Org Video Driver
[     4.666]  ABI class: X.Org Video Driver, version 23.0
[     4.666] (II) NOUVEAU driver Date:   Tue Sep 20 00:31:06 2016 -0400
[     4.666] (II) NOUVEAU driver for NVIDIA chipset families :
[     4.666]  RIVA TNT        (NV04)
[     4.666]  RIVA TNT2       (NV05)
[     4.666]  GeForce 256     (NV10)
[     4.666]  GeForce 2       (NV11, NV15)
[     4.666]  GeForce 4MX     (NV17, NV18)
[     4.666]  GeForce 3       (NV20)
[     4.666]  GeForce 4Ti     (NV25, NV28)
[     4.666]  GeForce FX      (NV3x)
[     4.666]  GeForce 6       (NV4x)
[     4.667]  GeForce 7       (G7x)
[     4.667]  GeForce 8       (G8x)
[     4.667]  GeForce GTX 200 (NVA0)
[     4.667]  GeForce GTX 400 (NVC0)
[     4.667] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[     4.667] (II) FBDEV: driver for framebuffer: fbdev
[     4.667] (II) VESA: driver for VESA chipsets: vesa
[     4.672] (II) [drm] nouveau interface version: 1.3.1
[     4.672] (EE) Unknown chipset: NV118
[     4.686] (II) modeset(0): using drv /dev/dri/card0
[     4.687] (II) modeset(G0): using drv /dev/dri/card1
[     4.687] (WW) Falling back to old probe method for fbdev
[     4.687] (II) Loading sub module "fbdevhw"
[     4.687] (II) LoadModule: "fbdevhw"
[     4.687] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[     4.726] (II) Module fbdevhw: vendor="X.Org Foundation"
[     4.726]  compiled for 1.19.2, module version = 0.0.2
[     4.726]  ABI class: X.Org Video Driver, version 23.0
[     4.726] (WW) Falling back to old probe method for vesa
[     4.726] (II) modeset(0): Creating default Display subsection in Screen section
  "Default Screen Section" for depth/fbbpp 24/32
[     4.726] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[     4.726] (==) modeset(0): RGB weight 888
[     4.726] (==) modeset(0): Default visual is TrueColor
[     4.726] (II) Loading sub module "glamoregl"
[     4.726] (II) LoadModule: "glamoregl"
[     4.726] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[     4.735] (II) Module glamoregl: vendor="X.Org Foundation"
[     4.735]  compiled for 1.19.2, module version = 1.0.0
[     4.735]  ABI class: X.Org ANSI C Emulation, version 0.4
[     4.735] (II) glamor: OpenGL accelerated X.org driver based.
[     4.761] (II) glamor: EGL version 1.4 (DRI2):
[     4.771] (II) modeset(0): glamor initialized
[     4.772] (II) modeset(0): Output eDP-1 has no monitor section
[     4.772] (II) modeset(0): Output DP-1 has no monitor section
[     4.772] (II) modeset(0): Output HDMI-1 has no monitor section
[     4.775] (II) modeset(0): Output HDMI-2 has no monitor section
[     4.776] (II) modeset(0): EDID for output eDP-1
[     4.776] (II) modeset(0): Manufacturer: AUO  Model: 71ec  Serial#: 0
[     4.776] (II) modeset(0): Year: 2015  Week: 1
[     4.776] (II) modeset(0): EDID Version: 1.4
[     4.776] (II) modeset(0): Digital Display Input
[     4.776] (II) modeset(0): 6 bits per channel
[     4.776] (II) modeset(0): Digital interface is DisplayPort
[     4.776] (II) modeset(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[     4.776] (II) modeset(0): Gamma: 2.20
[     4.776] (II) modeset(0): No DPMS capabilities specified
[     4.776] (II) modeset(0): Supported color encodings: RGB 4:4:4
[     4.776] (II) modeset(0): First detailed timing is preferred mode
[     4.776] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[     4.776] (II) modeset(0): redX: 0.575 redY: 0.345   greenX: 0.340 greenY: 0.570
[     4.776] (II) modeset(0): blueX: 0.160 blueY: 0.135   whiteX: 0.313 whiteY: 0.329
[     4.776] (II) modeset(0): Manufacturer's mask: 0
[     4.776] (II) modeset(0): Supported detailed timing:
[     4.776] (II) modeset(0): clock: 76.3 MHz   Image Size:  344 x 193 mm
[     4.776] (II) modeset(0): h_active: 1366  h_sync: 1374  h_sync_end 1384 h_blank_end 1558 h_border: 0
[     4.776] (II) modeset(0): v_active: 768  v_sync: 771  v_sync_end 772 v_blanking: 816 v_border: 0
[     4.776] (II) modeset(0): Supported detailed timing:
[     4.776] (II) modeset(0): clock: 61.0 MHz   Image Size:  344 x 193 mm
[     4.776] (II) modeset(0): h_active: 1366  h_sync: 1374  h_sync_end 1384 h_blank_end 1558 h_border: 0
[     4.776] (II) modeset(0): v_active: 768  v_sync: 771  v_sync_end 772 v_blanking: 816 v_border: 0
[     4.776] (II) modeset(0):  91MGDB156XTN
[     4.776] (II) modeset(0): Unknown vendor-specific block 0
[     4.776] (II) modeset(0): EDID (in hex):
[     4.776] (II) modeset(0):   00ffffffffffff0006afec7100000000
[     4.776] (II) modeset(0):   01190104952213780250259358579229
[     4.776] (II) modeset(0):   22505400000001010101010101010101
[     4.776] (II) modeset(0):   010101010101ce1d56c050003030080a
[     4.776] (II) modeset(0):   310058c11000001ad81756c050003030
[     4.776] (II) modeset(0):   080a310058c11000001a000000fe0039
[     4.776] (II) modeset(0):   314d4744804231353658544e00000000
[     4.776] (II) modeset(0):   00004121960111000009010a202000e1
[     4.776] (II) modeset(0): Printing probed modes for output eDP-1
[     4.776] (II) modeset(0): Modeline "1366x768"x60.0   76.30  1366 1374 1384 1558  768 771 772 816 +hsync -vsync (49.0 kHz eP)
[     4.776] (II) modeset(0): Modeline "1366x768"x48.0   61.04  1366 1374 1384 1558  768 771 772 816 +hsync -vsync (39.2 kHz e)
[     4.776] (II) modeset(0): Modeline "1360x768"x59.8   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsync (47.7 kHz d)
[     4.776] (II) modeset(0): Modeline "1360x768"x60.0   72.00  1360 1408 1440 1520  768 771 781 790 +hsync -vsync (47.4 kHz d)
[     4.776] (II) modeset(0): Modeline "1024x768"x120.1  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[     4.776] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[     4.776] (II) modeset(0): Modeline "960x720"x120.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[     4.776] (II) modeset(0): Modeline "928x696"x120.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[     4.776] (II) modeset(0): Modeline "896x672"x120.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[     4.776] (II) modeset(0): Modeline "960x600"x120.0   77.00  960 984 1000 1040  600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[     4.776] (II) modeset(0): Modeline "960x540"x120.0   69.25  960 984 1000 1040  540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[     4.776] (II) modeset(0): Modeline "800x600"x120.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[     4.776] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[     4.776] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[     4.776] (II) modeset(0): Modeline "840x525"x120.0   73.12  840 892 980 1120  525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[     4.776] (II) modeset(0): Modeline "840x525"x119.8   59.50  840 864 880 920  525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[     4.776] (II) modeset(0): Modeline "800x512"x120.3   51.56  800 800 828 832  512 512 514 515 doublescan +hsync +vsync (62.0 kHz d)
[     4.776] (II) modeset(0): Modeline "700x525"x120.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[     4.776] (II) modeset(0): Modeline "640x512"x120.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[     4.776] (II) modeset(0): Modeline "720x450"x119.8   53.25  720 760 836 952  450 451 454 467 doublescan -hsync +vsync (55.9 kHz d)
[     4.776] (II) modeset(0): Modeline "640x480"x120.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[     4.776] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[     4.776] (II) modeset(0): Modeline "680x384"x119.6   42.38  680 716 784 888  384 385 390 399 doublescan -hsync +vsync (47.7 kHz d)
[     4.776] (II) modeset(0): Modeline "680x384"x119.9   36.00  680 704 720 760  384 385 390 395 doublescan +hsync -vsync (47.4 kHz d)
[     4.776] (II) modeset(0): Modeline "576x432"x120.1   40.81  576 608 668 760  432 432 434 447 doublescan -hsync +vsync (53.7 kHz d)
[     4.776] (II) modeset(0): Modeline "512x384"x120.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[     4.776] (II) modeset(0): Modeline "400x300"x120.6   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[     4.776] (II) modeset(0): Modeline "400x300"x112.7   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[     4.776] (II) modeset(0): Modeline "320x240"x120.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[     4.776] (II) modeset(0): EDID for output DP-1
[     4.776] (II) modeset(0): EDID for output HDMI-1
[     4.779] (II) modeset(0): EDID for output HDMI-2
[     4.779] (II) modeset(0): Output eDP-1 connected
[     4.779] (II) modeset(0): Output DP-1 disconnected
[     4.779] (II) modeset(0): Output HDMI-1 disconnected
[     4.779] (II) modeset(0): Output HDMI-2 disconnected
[     4.779] (II) modeset(0): Using exact sizes for initial modes
[     4.779] (II) modeset(0): Output eDP-1 using initial mode 1366x768 +0+0
[     4.779] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[     4.779] (==) modeset(0): DPI set to (96, 96)
[     4.779] (II) Loading sub module "fb"
[     4.779] (II) LoadModule: "fb"
[     4.779] (II) Loading /usr/lib/xorg/modules/libfb.so
[     4.780] (II) Module fb: vendor="X.Org Foundation"
[     4.780]  compiled for 1.19.2, module version = 1.0.0
[     4.780]  ABI class: X.Org ANSI C Emulation, version 0.4
[     4.796] (==) modeset(G0): Depth 24, (==) framebuffer bpp 32
[     4.796] (==) modeset(G0): RGB weight 888
[     4.796] (==) modeset(G0): Default visual is TrueColor
[     4.796] (II) Loading sub module "glamoregl"
[     4.796] (II) LoadModule: "glamoregl"
[     4.796] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[     4.796] (II) Module glamoregl: vendor="X.Org Foundation"
[     4.796]  compiled for 1.19.2, module version = 1.0.0
[     4.796]  ABI class: X.Org ANSI C Emulation, version 0.4
[     4.796] (II) glamor: OpenGL accelerated X.org driver based.
[     5.046] (II) glamor: EGL version 1.4 (DRI2):
[     5.055] (II) modeset(G0): glamor initialized
[     5.055] (==) modeset(G0): Using gamma correction (1.0, 1.0, 1.0)
[     5.055] (==) modeset(G0): DPI set to (96, 96)
[     5.055] (II) Loading sub module "fb"
[     5.055] (II) LoadModule: "fb"
[     5.055] (II) Loading /usr/lib/xorg/modules/libfb.so
[     5.055] (II) Module fb: vendor="X.Org Foundation"
[     5.055]  compiled for 1.19.2, module version = 1.0.0
[     5.055]  ABI class: X.Org ANSI C Emulation, version 0.4
[     5.055] (II) UnloadModule: "fbdev"
[     5.055] (II) Unloading fbdev
[     5.056] (II) UnloadSubModule: "fbdevhw"
[     5.056] (II) Unloading fbdevhw
[     5.056] (II) UnloadModule: "vesa"
[     5.056] (II) Unloading vesa
[     5.056] (==) Depth 24 pixmap format is 32 bpp
[     5.094] (==) modeset(G0): Backing store enabled
[     5.094] (==) modeset(G0): Silken mouse enabled
[     5.094] (II) modeset(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
[     5.095] (==) modeset(G0): DPMS enabled
[     5.095] (II) modeset(G0): [DRI2] Setup complete
[     5.095] (II) modeset(G0): [DRI2]   DRI driver: nouveau
[     5.095] (II) modeset(G0): [DRI2]   VDPAU driver: nouveau
[     5.162] (==) modeset(0): Backing store enabled
[     5.162] (==) modeset(0): Silken mouse enabled
[     5.162] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[     5.162] (==) modeset(0): DPMS enabled
[     5.162] (II) modeset(0): [DRI2] Setup complete
[     5.162] (II) modeset(0): [DRI2]   DRI driver: i965
[     5.162] (II) modeset(0): [DRI2]   VDPAU driver: i965
[     5.162] (--) RandR disabled
[     5.165] (II) SELinux: Disabled on system
[     5.168] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[     5.168] (II) AIGLX: enabled GLX_ARB_create_context
[     5.168] (II) AIGLX: enabled GLX_ARB_create_context_profile
[     5.168] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[     5.168] (II) AIGLX: enabled GLX_INTEL_swap_event
[     5.168] (II) AIGLX: enabled GLX_SGI_swap_control
[     5.168] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[     5.168] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[     5.168] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[     5.168] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[     5.168] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[     5.168] (II) AIGLX: Loaded and initialized i965
[     5.168] (II) GLX: Initialized DRI2 GL provider for screen 0
[     5.169] (II) modeset(G0): Damage tracking initialized
[     5.172] (II) modeset(0): Damage tracking initialized
[     5.172] (II) modeset(0): Setting screen physical size to 361 x 203
[     5.208] (II) config/udev: Adding input device Power Button (/dev/input/event8)
[     5.208] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     5.208] (II) LoadModule: "libinput"
[     5.208] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[     5.211] (II) Module libinput: vendor="X.Org Foundation"
[     5.211]  compiled for 1.19.0, module version = 0.23.0
[     5.211]  Module class: X.Org XInput Driver
[     5.211]  ABI class: X.Org XInput driver, version 24.1
[     5.211] (II) Using input driver 'libinput' for 'Power Button'
[     5.211] (**) Power Button: always reports core events
[     5.211] (**) Option "Device" "/dev/input/event8"
[     5.211] (**) Option "_source" "server/udev"
[     5.212] (II) input device 'Power Button', /dev/input/event8 is tagged by udev as: Keyboard
[     5.212] (II) input device 'Power Button', /dev/input/event8 is a keyboard
[     5.232] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input9/event8"
[     5.232] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     5.232] (**) Option "xkb_model" "pc105"
[     5.232] (**) Option "xkb_layout" "fr"
[     5.232] (**) Option "xkb_variant" "latin9"
[     5.254] (II) input device 'Power Button', /dev/input/event8 is tagged by udev as: Keyboard
[     5.254] (II) input device 'Power Button', /dev/input/event8 is a keyboard
[     5.254] (II) config/udev: Adding input device Video Bus (/dev/input/event11)
[     5.254] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[     5.254] (II) Using input driver 'libinput' for 'Video Bus'
[     5.254] (**) Video Bus: always reports core events
[     5.254] (**) Option "Device" "/dev/input/event11"
[     5.254] (**) Option "_source" "server/udev"
[     5.254] (II) input device 'Video Bus', /dev/input/event11 is tagged by udev as: Keyboard
[     5.254] (II) input device 'Video Bus', /dev/input/event11 is a keyboard
[     5.272] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input12/event11"
[     5.272] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[     5.272] (**) Option "xkb_model" "pc105"
[     5.272] (**) Option "xkb_layout" "fr"
[     5.272] (**) Option "xkb_variant" "latin9"
[     5.272] (II) input device 'Video Bus', /dev/input/event11 is tagged by udev as: Keyboard
[     5.272] (II) input device 'Video Bus', /dev/input/event11 is a keyboard
[     5.272] (II) config/udev: Adding input device Video Bus (/dev/input/event12)
[     5.272] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[     5.272] (II) Using input driver 'libinput' for 'Video Bus'
[     5.272] (**) Video Bus: always reports core events
[     5.272] (**) Option "Device" "/dev/input/event12"
[     5.272] (**) Option "_source" "server/udev"
[     5.272] (II) input device 'Video Bus', /dev/input/event12 is tagged by udev as: Keyboard
[     5.272] (II) input device 'Video Bus', /dev/input/event12 is a keyboard
[     5.304] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:12/LNXVIDEO:01/input/input13/event12"
[     5.304] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[     5.304] (**) Option "xkb_model" "pc105"
[     5.304] (**) Option "xkb_layout" "fr"
[     5.304] (**) Option "xkb_variant" "latin9"
[     5.304] (II) input device 'Video Bus', /dev/input/event12 is tagged by udev as: Keyboard
[     5.304] (II) input device 'Video Bus', /dev/input/event12 is a keyboard
[     5.304] (II) config/udev: Adding input device Lid Switch (/dev/input/event5)
[     5.304] (II) No input driver specified, ignoring this device.
[     5.304] (II) This device may have been added with another device file.
[     5.304] (II) config/udev: Adding input device Power Button (/dev/input/event7)
[     5.304] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     5.304] (II) Using input driver 'libinput' for 'Power Button'
[     5.304] (**) Power Button: always reports core events
[     5.304] (**) Option "Device" "/dev/input/event7"
[     5.304] (**) Option "_source" "server/udev"
[     5.304] (II) input device 'Power Button', /dev/input/event7 is tagged by udev as: Keyboard
[     5.304] (II) input device 'Power Button', /dev/input/event7 is a keyboard
[     5.320] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input8/event7"
[     5.320] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[     5.320] (**) Option "xkb_model" "pc105"
[     5.320] (**) Option "xkb_layout" "fr"
[     5.320] (**) Option "xkb_variant" "latin9"
[     5.320] (II) input device 'Power Button', /dev/input/event7 is tagged by udev as: Keyboard
[     5.320] (II) input device 'Power Button', /dev/input/event7 is a keyboard
[     5.320] (II) config/udev: Adding input device Sleep Button (/dev/input/event6)
[     5.320] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[     5.320] (II) Using input driver 'libinput' for 'Sleep Button'
[     5.320] (**) Sleep Button: always reports core events
[     5.320] (**) Option "Device" "/dev/input/event6"
[     5.320] (**) Option "_source" "server/udev"
[     5.320] (II) input device 'Sleep Button', /dev/input/event6 is tagged by udev as: Keyboard
[     5.320] (II) input device 'Sleep Button', /dev/input/event6 is a keyboard
[     5.336] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input7/event6"
[     5.336] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[     5.336] (**) Option "xkb_model" "pc105"
[     5.336] (**) Option "xkb_layout" "fr"
[     5.336] (**) Option "xkb_variant" "latin9"
[     5.336] (II) input device 'Sleep Button', /dev/input/event6 is tagged by udev as: Keyboard
[     5.336] (II) input device 'Sleep Button', /dev/input/event6 is a keyboard
[     5.336] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event15)
[     5.336] (II) No input driver specified, ignoring this device.
[     5.336] (II) This device may have been added with another device file.
[     5.337] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event16)
[     5.337] (II) No input driver specified, ignoring this device.
[     5.337] (II) This device may have been added with another device file.
[     5.337] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event17)
[     5.337] (II) No input driver specified, ignoring this device.
[     5.337] (II) This device may have been added with another device file.
[     5.337] (II) config/udev: Adding input device Microsoft Wired Keyboard 600 (/dev/input/event1)
[     5.337] (**) Microsoft Wired Keyboard 600: Applying InputClass "libinput keyboard catchall"
[     5.337] (II) Using input driver 'libinput' for 'Microsoft Wired Keyboard 600'
[     5.337] (**) Microsoft Wired Keyboard 600: always reports core events
[     5.337] (**) Option "Device" "/dev/input/event1"
[     5.337] (**) Option "_source" "server/udev"
[     5.338] (II) input device 'Microsoft Wired Keyboard 600', /dev/input/event1 is tagged by udev as: Keyboard
[     5.338] (II) input device 'Microsoft Wired Keyboard 600', /dev/input/event1 is a keyboard
[     5.372] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/0003:045E:07F8.0001/input/input3/event1"
[     5.372] (II) XINPUT: Adding extended input device "Microsoft Wired Keyboard 600" (type: KEYBOARD, id 11)
[     5.372] (**) Option "xkb_model" "pc105"
[     5.372] (**) Option "xkb_layout" "fr"
[     5.372] (**) Option "xkb_variant" "latin9"
[     5.372] (II) input device 'Microsoft Wired Keyboard 600', /dev/input/event1 is tagged by udev as: Keyboard
[     5.372] (II) input device 'Microsoft Wired Keyboard 600', /dev/input/event1 is a keyboard
[     5.372] (II) config/udev: Adding input device Microsoft Wired Keyboard 600 (/dev/input/event2)
[     5.372] (**) Microsoft Wired Keyboard 600: Applying InputClass "libinput keyboard catchall"
[     5.372] (II) Using input driver 'libinput' for 'Microsoft Wired Keyboard 600'
[     5.372] (**) Microsoft Wired Keyboard 600: always reports core events
[     5.372] (**) Option "Device" "/dev/input/event2"
[     5.372] (**) Option "_source" "server/udev"
[     5.373] (II) input device 'Microsoft Wired Keyboard 600', /dev/input/event2 is tagged by udev as: Keyboard
[     5.373] (II) input device 'Microsoft Wired Keyboard 600', /dev/input/event2 is a keyboard
[     5.404] (II) libinput: Microsoft Wired Keyboard 600: needs a virtual subdevice
[     5.404] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.1/0003:045E:07F8.0002/input/input4/event2"
[     5.404] (II) XINPUT: Adding extended input device "Microsoft Wired Keyboard 600" (type: MOUSE, id 12)
[     5.404] (**) Option "AccelerationScheme" "none"
[     5.404] (**) Microsoft Wired Keyboard 600: (accel) selected scheme none/0
[     5.404] (**) Microsoft Wired Keyboard 600: (accel) acceleration factor: 2.000
[     5.404] (**) Microsoft Wired Keyboard 600: (accel) acceleration threshold: 4
[     5.404] (II) input device 'Microsoft Wired Keyboard 600', /dev/input/event2 is tagged by udev as: Keyboard
[     5.404] (II) input device 'Microsoft Wired Keyboard 600', /dev/input/event2 is a keyboard
[     5.404] (II) config/udev: Adding input device PixArt USB Optical Mouse (/dev/input/event3)
[     5.404] (**) PixArt USB Optical Mouse: Applying InputClass "libinput pointer catchall"
[     5.404] (II) Using input driver 'libinput' for 'PixArt USB Optical Mouse'
[     5.404] (**) PixArt USB Optical Mouse: always reports core events
[     5.404] (**) Option "Device" "/dev/input/event3"
[     5.405] (**) Option "_source" "server/udev"
[     5.405] (II) input device 'PixArt USB Optical Mouse', /dev/input/event3 is tagged by udev as: Mouse
[     5.405] (II) Device 'PixArt USB Optical Mouse' set to 1000 DPI
[     5.405] (II) input device 'PixArt USB Optical Mouse', /dev/input/event3 is a pointer caps
[     5.436] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/0003:093A:2510.0003/input/input5/event3"
[     5.436] (II) XINPUT: Adding extended input device "PixArt USB Optical Mouse" (type: MOUSE, id 13)
[     5.436] (**) Option "AccelerationScheme" "none"
[     5.436] (**) PixArt USB Optical Mouse: (accel) selected scheme none/0
[     5.436] (**) PixArt USB Optical Mouse: (accel) acceleration factor: 2.000
[     5.436] (**) PixArt USB Optical Mouse: (accel) acceleration threshold: 4
[     5.436] (II) input device 'PixArt USB Optical Mouse', /dev/input/event3 is tagged by udev as: Mouse
[     5.436] (II) Device 'PixArt USB Optical Mouse' set to 1000 DPI
[     5.436] (II) input device 'PixArt USB Optical Mouse', /dev/input/event3 is a pointer caps
[     5.436] (II) config/udev: Adding input device PixArt USB Optical Mouse (/dev/input/mouse0)
[     5.436] (II) No input driver specified, ignoring this device.
[     5.436] (II) This device may have been added with another device file.
[     5.437] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event13)
[     5.437] (II) No input driver specified, ignoring this device.
[     5.437] (II) This device may have been added with another device file.
[     5.437] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event14)
[     5.437] (II) No input driver specified, ignoring this device.
[     5.437] (II) This device may have been added with another device file.
[     5.437] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[     5.437] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[     5.437] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[     5.437] (**) AT Translated Set 2 keyboard: always reports core events
[     5.437] (**) Option "Device" "/dev/input/event0"
[     5.437] (**) Option "_source" "server/udev"
[     5.437] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[     5.437] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[     5.476] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[     5.476] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
[     5.476] (**) Option "xkb_model" "pc105"
[     5.476] (**) Option "xkb_layout" "fr"
[     5.476] (**) Option "xkb_variant" "latin9"
[     5.476] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[     5.476] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[     5.476] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event4)
[     5.476] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[     5.476] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad'
[     5.476] (**) SynPS/2 Synaptics TouchPad: always reports core events
[     5.476] (**) Option "Device" "/dev/input/event4"
[     5.476] (**) Option "_source" "server/udev"
[     5.476] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event4 is tagged by udev as: Touchpad
[     5.476] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event4 is a touchpad
[     5.508] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input2/event4"
[     5.508] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 15)
[     5.508] (**) Option "AccelerationScheme" "none"
[     5.508] (**) SynPS/2 Synaptics TouchPad: (accel) selected scheme none/0
[     5.508] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[     5.508] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[     5.508] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event4 is tagged by udev as: Touchpad
[     5.508] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event4 is a touchpad
[     5.508] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[     5.508] (II) No input driver specified, ignoring this device.
[     5.508] (II) This device may have been added with another device file.
[     5.508] (II) config/udev: Adding input device PC Speaker (/dev/input/event9)
[     5.508] (II) No input driver specified, ignoring this device.
[     5.508] (II) This device may have been added with another device file.
[     5.508] (II) config/udev: Adding input device MSI WMI hotkeys (/dev/input/event10)
[     5.508] (**) MSI WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[     5.508] (II) Using input driver 'libinput' for 'MSI WMI hotkeys'
[     5.508] (**) MSI WMI hotkeys: always reports core events
[     5.508] (**) Option "Device" "/dev/input/event10"
[     5.508] (**) Option "_source" "server/udev"
[     5.509] (II) input device 'MSI WMI hotkeys', /dev/input/event10 is tagged by udev as: Keyboard
[     5.509] (II) input device 'MSI WMI hotkeys', /dev/input/event10 is a keyboard
[     5.524] (**) Option "config_info" "udev:/sys/devices/virtual/input/input11/event10"
[     5.524] (II) XINPUT: Adding extended input device "MSI WMI hotkeys" (type: KEYBOARD, id 16)
[     5.524] (**) Option "xkb_model" "pc105"
[     5.524] (**) Option "xkb_layout" "fr"
[     5.524] (**) Option "xkb_variant" "latin9"
[     5.524] (II) input device 'MSI WMI hotkeys', /dev/input/event10 is tagged by udev as: Keyboard
[     5.524] (II) input device 'MSI WMI hotkeys', /dev/input/event10 is a keyboard
[     5.536] (**) Microsoft Wired Keyboard 600: Applying InputClass "libinput keyboard catchall"
[     5.536] (II) Using input driver 'libinput' for 'Microsoft Wired Keyboard 600'
[     5.536] (**) Microsoft Wired Keyboard 600: always reports core events
[     5.536] (**) Option "Device" "/dev/input/event2"
[     5.536] (**) Option "_source" "_driver/libinput"
[     5.536] (II) libinput: Microsoft Wired Keyboard 600: is a virtual subdevice
[     5.536] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.1/0003:045E:07F8.0002/input/input4/event2"
[     5.536] (II) XINPUT: Adding extended input device "Microsoft Wired Keyboard 600" (type: KEYBOARD, id 17)
[     5.536] (**) Option "xkb_model" "pc105"
[     5.536] (**) Option "xkb_layout" "fr"
[     5.536] (**) Option "xkb_variant" "latin9"
[    65.517] (II) modeset(0): EDID vendor "AUO", prod id 29164
[    65.517] (II) modeset(0): Printing DDC gathered Modelines:
[    65.517] (II) modeset(0): Modeline "1366x768"x0.0   76.30  1366 1374 1384 1558  768 771 772 816 +hsync -vsync (49.0 kHz eP)
[    65.517] (II) modeset(0): Modeline "1366x768"x0.0   61.04  1366 1374 1384 1558  768 771 772 816 +hsync -vsync (39.2 kHz e)
[    65.614] (II) modeset(0): EDID vendor "AUO", prod id 29164
[    65.614] (II) modeset(0): Printing DDC gathered Modelines:
[    65.614] (II) modeset(0): Modeline "1366x768"x0.0   76.30  1366 1374 1384 1558  768 771 772 816 +hsync -vsync (49.0 kHz eP)
[    65.614] (II) modeset(0): Modeline "1366x768"x0.0   61.04  1366 1374 1384 1558  768 771 772 816 +hsync -vsync (39.2 kHz e)



apt-cache policy libgl1-mesa-dri libgl1-mesa-glx xserver-xorg-video-intel



libgl1-mesa-dri:
  Installé : 13.0.6-1+b2
  Candidat : 13.0.6-1+b2
 Table de version :
 *** 13.0.6-1+b2 500
        500 http://deb.debian.org/debian stretch/main amd64 Packages
        100 /var/lib/dpkg/status
libgl1-mesa-glx:
  Installé : 13.0.6-1+b2
  Candidat : 13.0.6-1+b2
 Table de version :
 *** 13.0.6-1+b2 500
        500 http://deb.debian.org/debian stretch/main amd64 Packages
        100 /var/lib/dpkg/status
xserver-xorg-video-intel:
  Installé : 2:2.99.917+git20161206-1
  Candidat : 2:2.99.917+git20161206-1
 Table de version :
 *** 2:2.99.917+git20161206-1 500
        500 http://deb.debian.org/debian stretch/main amd64 Packages
        100 /var/lib/dpkg/status
 



dmesg | grep firmware



[    3.198285] iwlwifi 0000:03:00.0: firmware: direct-loading firmware iwlwifi-3160-17.ucode
[    3.198709] iwlwifi 0000:03:00.0: loaded firmware version 17.352738.0 op_mode iwlmvm
[    4.712118] bluetooth hci0: firmware: direct-loading firmware intel/ibt-hw-37.7.10-fw-1.0.1.2d.d.bseq
[    4.712120] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.0.1.2d.d.bseq
[    4.902858] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated



Edit : Je ne me rappelle plus quel paquet bumblebee j'avais installé, mais je t'avoue que c'est en essayant d'installer l'un des deux la dernière fois que j'ai complètement cassé mon démarrage et que j'ai dû tout réinstaller.

Dernière modification par mcfly (17-09-2017 15:37:47)

Hors ligne

#6 18-09-2017 15:16:48

èfpé
Membre
Inscription : 10-07-2016

Re : Quel pilote graphique utiliser ? (kernel panic sur Debian Stretch)

Bonjour mcfly,

cat /var/log/Xorg.0.log

[     4.650] (II) xfree86: Adding drm device (/dev/dri/card1)
[     4.651] (II) xfree86: Adding drm device (/dev/dri/card0)
[     4.654] (--) PCI:*(0:0:2:0) 8086:1612:1462:114c rev 10, Mem @ 0xa1000000/16777216, ...
[     4.654] (--) PCI: (0:1:0:0) 10de:1347:1462:114c rev 162, Mem @ 0xa2000000/16777216, ...


Sans surprise c'est le contrôleur Intel (8086:1612) qui est utilisé par défaut ;

[     4.672] (II) [drm] nouveau interface version: 1.3.1
[     4.672] (EE) Unknown chipset: NV118


Ceci me chiffonne un peu, bien que cela ne semble pas bloquant par la suite :

[     4.686] (II) modeset(0): using drv /dev/dri/card0
[     4.687] (II) modeset(G0): using drv /dev/dri/card1
[     .....]
[     5.095] (II) modeset(G0): [DRI2] Setup complete
[     5.095] (II) modeset(G0): [DRI2]   DRI driver: nouveau
[     5.095] (II) modeset(G0): [DRI2]   VDPAU driver: nouveau
[     .....]
[     5.162] (II) modeset(0): [DRI2] Setup complete
[     5.162] (II) modeset(0): [DRI2]   DRI driver: i965
[     5.162] (II) modeset(0): [DRI2]   VDPAU driver: i965


Par ailleurs, il semble bien que la définition d'écran est nominale (1366x768) :

[    65.517] (II) modeset(0): EDID vendor "AUO", prod id 29164
[    65.517] (II) modeset(0): Printing DDC gathered Modelines:
[    65.517] (II) modeset(0): Modeline "1366x768"x0.0   76.30  1366 1374 1384 1558  768 ...
[    65.517] (II) modeset(0): Modeline "1366x768"x0.0   61.04  1366 1374 1384 1558  768 ...


Bref le contrôleur graphique intégré (Intel HD Graphics 5600) est correctement pris en charge, et je ne vois d'ailleurs aucun argument pour te faire installer le paquet firmware-misc-nonfree (ceci dit rien ne t'empêche de l'installer, au pire cette manip aura simplement été inutile) :

apt-get install firmware-misc-nonfree


Le contrôleur graphique dédié (NVIDIA GeForce 940M) ne pourra pas prendre le relais du précédent (GPU primaire → GPU secondaire) tant que Bumblebee ne sera pas installé. C'est quand même un petit peu ballot de ne pas te souvenir de ce qui avait réglé le problème sous Jessie... Le changelog de nouveau n'est pas des plus explicites, mais il semble que la prise en charge des GPU de la famille NV110 (Maxwell) n'est pas complète, en version 1.0.13 (Stretch) ; j'imagine naïvement que tu avais installé Bumblebee via le paquet bumblebee-nvidia, comme robert2a te l'avait suggéré. Note que tu peux commencer par une simulation :

apt-get -s install bumblebee-nvidia


Tu ne casseras rien et on verra s'il y a des trucs... des machins... tout ça smile

Dernière modification par èfpé (18-09-2017 16:16:48)

Hors ligne

#7 19-09-2017 14:22:10

mcfly
Membre
Inscription : 29-04-2017

Re : Quel pilote graphique utiliser ? (kernel panic sur Debian Stretch)

Salut èfpé,

D'abord merci pour tes conseils, je vais les suivre à la lettre mais avant je dois t'avouer qu'il m'est arrivé une bien vilaine tuile avec ma debian ce matin.
Je comptais justement installer bumblebee, j'étais au téléphone et je consultais mes mails en même temps, puis j'ai eu la superbe idée de faire une petite mise à jour comme à mon habitude une fois par semaine (le bon vieux apt-get update et apt-get upgrade en root).

Sauf que cette fois-ci, Debian a décidé de faire ce fameux freeze en pleine mise à jour.
L'ordinateur a naturellement redémarré au bout de 30 secondes, et cette fois-ci je n'ai plus accès à lightDM.

En gros, l'ordinateur démarre, je vois un écran noir, il s'éclaircit, je vois juste le curseur de la souris apparaître puis disparaître, et ensuite l'ordinateur éteint l'écran et réessaie d'afficher l'interface, je revois à nouveau le pointeur de la souris, puis ça recommence ... comme si il démarrait en boucle.

Un peu désarmé par cette surprise, j'ai essayé un démarrage en mode "rescue" via Grub, et j'ai pris soin de faire une photo d'écran car l'ordinateur reste figé en me laissant quand même des informations :

Photo d'écran :

https://drive.google.com/file/d/0Bx9iXV … h1TnM/view

Dernière modification par mcfly (20-09-2017 07:01:15)

Hors ligne

#8 20-09-2017 07:02:01

mcfly
Membre
Inscription : 29-04-2017

Re : Quel pilote graphique utiliser ? (kernel panic sur Debian Stretch)

Une idée sur le problème ? scratchhead.gif

Hors ligne

#9 20-09-2017 07:53:19

robert2a
Membre
Lieu : France
Distrib. : Stretch 9
Noyau : Linux 4.9.0-3 4.9.30-2
(G)UI : Mate
Inscription : 15-11-2014

Re : Quel pilote graphique utiliser ? (kernel panic sur Debian Stretch)

Bonjour

tu est en mode dépannage , le système attend que tu entre ton mot de passe root
ou les touches CTRL + D  pour continuer le boot
tu dis en pleine mise a jour , de stretch ? , ou tu a essayé d installer quelque chose ?
pour ce que dit èfpé  => "mais il semble que la prise en charge des GPU de la famille NV110 (Maxwell) n'est pas complète, en version 1.0.13 (Stretch) "

c'est exact , sur stretch il y a encore des soucis par exemple sur une GTX750TI avec nouveau , qui est un gpu maxwell castré
ps: il semble que le noyau 4.12 apporte des améliorations pour nvidia avec nouveau. (testé sur buster et sid avec la gtx750ti )

je sais pas trop quoi te conseiller pour ce portable  roll

mettre le firmware-misc-nonfree (il améliore les choses pour les gpu intel et nvidia ) sans chercher a comprendre .
voir si un noyau plus récent dans les backports (4.12) peu peut etre améliorer les choses (sans garanti )
tester bumblebee (avec nouveau )  ou  bumblebee-nvidia.

nota : ta machine devrait etre stable avec lightdm sans bumblebee sur le gpu intel (juste tu n'a pas l'utilisation possible du gpu secondaire nvidia ) .

un bug aléatoire comme ça , c'est galère a détecter le problème hmm  (je pense que le gpu 940M pose problème avec le noyau 4.9 (que tu n'a pas avec le 3.16 )
si tu a gardé le 3.16 démarrer avec celui ci (je pense a un bug sur KMS )

ps: les drivers propriétaires nvidia ont des bugs aussi , j'en ai trouvé un sur la version de sid actuelle (qui n'est pas sur la version de buster )  roll

Dernière modification par robert2a (20-09-2017 08:25:13)

Hors ligne

#10 20-09-2017 23:17:10

mcfly
Membre
Inscription : 29-04-2017

Re : Quel pilote graphique utiliser ? (kernel panic sur Debian Stretch)

Bonsoir les amis,

J'ai tenté simplement de récupérer mes données de la partition sur laquelle j'avais mis mon "home" en utilisant un live CD et en faisant copier-coller sur un ddd externe.
La copie est corrompue, plusieurs fichiers non copiables car "permission denied" (la plupart sont des documents pdf et des fichiers libre office).

La cerise sur la gâteau a été le freeze de lubuntu (le même qu'avec Debian) pendant la copie, résultat disque dur externe également corrompu.

J'abandonne Linux pour ce modèle d'ordinateur, trop de problèmes liés au hardware ... ça me déprime ... sad

Dernière modification par mcfly (20-09-2017 23:17:26)

Hors ligne

Pied de page des forums