Partage impossible avec Samba
J'ai un soucis avec le partage Windows et Samba sur un Debian 6.00, Linux 2.6.26-2-686 sur i686. Je tente de me brancher avec un Mac OS 10.6, le nom du serveur s'affiche dans la fenêtre réseau, mais lorsque je viens pour me connecter, il y a ce message d'erreur : «Une erreur s'est produite à la connexion au serveur «Nom du Serveur». Vérifier le nom ou l'adresse IP du serveur puis réessayer».
Je ne peux voir le nom des partages, seulement celui du serveur, il n'y a plus de fenêtre demandant le nom d'utilisateur et le mot de passe.
J'ai tenté de me brancher avec un PC sur Windows 7 sans succès. Le message du diagnostic est le suivant : «Le périphérique ou la ressource distant n'accepte pas la connexion. ».
J'ai tenté de rebooter le routeur, le serveur ainsi que le serveur Samba. Par contre, je peux me brancher à ce serveur avec Webmin 1.900, ainsi qu'avec le terminal par SSH.
Lors d'une recherche de paquet Samba j'obtiens ce résultat
libwbclient0 3.5.6~dfsg-3squeeze11 K-O Samba winbind client library
samba 3.5.6~dfsg-3squeeze11 P-T SMB/CIFS file, print, and login server for Unix
samba-common 3.5.6~dfsg-3squeeze11 P-T common files used by both the Samba server and client
samba-common-bin 3.5.6~dfsg-3squeeze11 P-T common files used by both the Samba server and client
samba-doc 3.5.6~dfsg-3squeeze11
Par ailleurs, je suis capable de me brancher avec un autre serveur sur Debian 6. Il était possible de se brancher avant que je ne fasse une mise à jour des paquets, ainsi qu'un ménage des utilisateurs des partages et un synchronisation des utilisateurs Unix, ainsi que l'installation de WebMin 1.900.
Je joins le fichier configuration :
#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which
# are not shown in this example
#
# Any line which starts with a ; (semi-colon) or a # (hash)
# is a comment and is ignored. In this example we will use a #
# for commentary and a ; for parts of the config file that you
# may wish to enable
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not many any basic syntactic
# errors.
#
#======================= Global Settings =======================
[global]
log file = /var/log/samba/log.%m
guest account = www-data
passwd chat = *Enter\snew\s*\spassword:* %n\n **Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully*
socket options = TCP_NODELAY
obey pam restrictions = yes
encrypt passwords = yes
passwd program = /usr/bin/passwd %u
passdb backend = tdbsam
dns proxy = no
server string = %h server (Samba %v)
invalid users = root
path = /home/
workgroup = WORKGROUP
os level = 20
syslog = 0
panic action = /usr/share/samba/panic-action %d
max log size = 1000
[homes]
writeable = yes
path = /home/jean
only user = yes
guest ok = no
create mask = 0700
directory mask = 0700
comment = Home Directories
valid users = @users
user = %S
# By default, the home directories are exported read-only. Change next
# parameter to 'yes' if you want to be able to write to them.
# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
; comment = Network Logon Service
; path = /home/samba/netlogon
; guest ok = yes
; writable = no
; share modes = no
[printers]
printable = yes
writable = no
path = /tmp
comment = All Printers
public = no
create mode = 0700
# Windows clients look for this share name as a source of downloadable
# printer drivers
[print$]
guest ok = no
comment = Printer Drivers
writable = no
path = /var/lib/samba/printers
# Uncomment to allow remote administration of Windows print drivers.
# Replace 'ntadmin' with the name of the group your admin users are
# members of.
; write list = root, @ntadmin
# A sample share for sharing your CD-ROM with others.
;[cdrom]
; comment = Samba server's CD-ROM
; writable = no
; locking = no
; path = /cdrom
; public = yes
# The next two parameters show how to auto-mount a CD-ROM when the
# cdrom share is accesed. For this to work /etc/fstab must contain
# an entry like this:
#
# /dev/scd0 /cdrom iso9660 defaults,noauto,ro,user 0 0
#
# The CD-ROM gets unmounted automatically after the connection to the
#
# If you don't want to use auto-mounting/unmounting make sure the CD
# is mounted on /cdrom
#
; preexec = /bin/mount /cdrom
; postexec = /bin/umount /cdrom
[coffre]
volume = "coffre %u"
writeable = yes
invalid users = root @wheel
path = /mnt/coffre/%u
guest ok = no
create mask = 0700
directory mask = 0700
[coffre jean]
guest account = nobody
browseable = yes
writeable = yes
invalid users = root,public,julien
path = /mnt/coffre/%u
write list = jean
create mask = 0700
directory mask = 0700
valid users = jean
user = jean
[coffre julien]
browseable = yes
writeable = yes
only user = yes
path = /mnt/coffre/%u
write list = julien jean
create mask = 0700
directory mask = 0700
valid users = julien jean
user = julien
[JeanHome]
path = /home/jean
--
Jean Gould 5219, rue Jeanne-Mance Montréal, Qc, H2V 4K3 514-270-8204