[Résolu]comment gérer deux cartes intel+radeon

chalu · 25-12-2023 11:47:28

Bonjour

J'ai installé l'ISO DFiso sur un PC HP (voir le fil) qui a deux cartes graphiques : intel + amd.
J'ai installé chromium mais comme il n'y a plus moyen de se connecter au compte google et que c'est une demande des utilisateurs du PC, j'ai installé chrome. Que ce soit avec chromium ou avec chrome, le demarrage me semble long donc j'ai fait la commande dans un terminal et j'ai des messages d'erreur concernant la carte amd (radeon).
Voici le lspci de cet ordinateur :

lspci

00.0 Host bridge: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Host Bridge/DRAM Registers (rev 07)

01.0 PCI bridge: Intel Corporation 6th-10th Gen Core Processor PCIe Controller (x16) (rev 07)

02.0 VGA compatible controller: Intel Corporation HD Graphics 530 (rev 06)

08.0 System peripheral: Intel Corporation Xeon E3-1200 v5/v6 / E3-1500 v5 / 6th/7th/8th Gen Core Processor Gaussian Mixture Model

14.0 USB controller: Intel Corporation 100 Series/C230 Series Chipset Family USB 3.0 xHCI Controller (rev 31)

15.0 Signal processing controller: Intel Corporation 100 Series/C230 Series Chipset Family Serial IO I2C Controller #0 (rev 31)

15.1 Signal processing controller: Intel Corporation 100 Series/C230 Series Chipset Family Serial IO I2C Controller #1 (rev 31)

16.0 Communication controller: Intel Corporation 100 Series/C230 Series Chipset Family MEI Controller #1 (rev 31)

17.0 SATA controller: Intel Corporation Q170/Q150/B150/H170/H110/Z170/CM236 Chipset SATA Controller [AHCI Mode] (rev 31)

1c.0 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #5 (rev f1)

1d.0 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #15 (rev f1)

1e.0 Signal processing controller: Intel Corporation 100 Series/C230 Series Chipset Family Serial IO UART #0 (rev 31)

1f.0 ISA bridge: Intel Corporation H170 Chipset LPC/eSPI Controller (rev 31)

1f.2 Memory controller: Intel Corporation 100 Series/C230 Series Chipset Family Power Management Controller (rev 31)

1f.3 Audio device: Intel Corporation 100 Series/C230 Series Chipset Family HD Audio Controller (rev 31)

1f.4 SMBus: Intel Corporation 100 Series/C230 Series Chipset Family SMBus (rev 31)

00.0 Display controller: Advanced Micro Devices, Inc. [AMD/ATI] Jet PRO [Radeon R5 M230 / R7 M260DX / Radeon 520/610 Mobile] (rev 83)

00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 10)

00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8723BE PCIe Wireless Network Adapter

Quand je démarre le navigateur chrome

google-chrome

radeon: Failed to allocate virtual address for buffer:

radeon:    size      : 65536 bytes

radeon:    alignment : 4096 bytes

radeon:    domains   : 4

radeon:    va        : 0x0000000100000000

radeon: Failed to deallocate virtual address for buffer:

radeon:    size      : 65536 bytes

radeon:    va        : 0x100000000

radeon: Failed to allocate virtual address for buffer:

radeon:    size      : 65536 bytes

radeon:    alignment : 4096 bytes

radeon:    domains   : 4

radeon:    va        : 0x0000000100000000

radeon: Failed to deallocate virtual address for buffer:

radeon:    size      : 65536 bytes

radeon:    va        : 0x100000000

radeonsi: can't create border_color_buffer

radeonsi: Failed to create a context.

radeon: Failed to allocate virtual address for buffer:

radeon:    size      : 65536 bytes

radeon:    alignment : 4096 bytes

radeon:    domains   : 4

radeon:    va        : 0x0000000100000000

radeon: Failed to deallocate virtual address for buffer:

radeon:    size      : 65536 bytes

radeon:    va        : 0x100000000

radeon: Failed to allocate virtual address for buffer:

radeon:    size      : 65536 bytes

radeon:    alignment : 4096 bytes

radeon:    domains   : 4

radeon:    va        : 0x0000000100000000

radeon: Failed to deallocate virtual address for buffer:

radeon:    size      : 65536 bytes

radeon:    va        : 0x100000000

radeonsi: can't create border_color_buffer

radeonsi: Failed to create a context.

libva error: /usr/lib/x86_64-linux-gnu/dri/r600_drv_video.so init failed

radeon: Failed to allocate virtual address for buffer:

radeon:    size      : 65536 bytes

radeon:    alignment : 4096 bytes

radeon:    domains   : 4

radeon:    va        : 0x0000000100000000

radeon: Failed to deallocate virtual address for buffer:

radeon:    size      : 65536 bytes

radeon:    va        : 0x100000000

radeon: Failed to allocate virtual address for buffer:

radeon:    size      : 65536 bytes

radeon:    alignment : 4096 bytes

radeon:    domains   : 4

radeon:    va        : 0x0000000100000000

radeon: Failed to deallocate virtual address for buffer:

radeon:    size      : 65536 bytes

radeon:    va        : 0x100000000

radeonsi: can't create border_color_buffer

radeonsi: Failed to create a context.

radeon: Failed to allocate virtual address for buffer:

radeon:    size      : 65536 bytes

radeon:    alignment : 4096 bytes

radeon:    domains   : 4

radeon:    va        : 0x0000000100000000

radeon: Failed to deallocate virtual address for buffer:

radeon:    size      : 65536 bytes

radeon:    va        : 0x100000000

radeon: Failed to allocate virtual address for buffer:

radeon:    size      : 65536 bytes

radeon:    alignment : 4096 bytes

radeon:    domains   : 4

radeon:    va        : 0x0000000100000000

radeon: Failed to deallocate virtual address for buffer:

radeon:    size      : 65536 bytes

radeon:    va        : 0x100000000

radeonsi: can't create border_color_buffer

radeonsi: Failed to create a context.

libva error: /usr/lib/x86_64-linux-gnu/dri/radeonsi_drv_video.so init failed

Fontconfig error: Cannot load default config file: No such file: (null)

Pour dmseg et les firmwares :

dmesg |grep -i firmware

[    0.054081] DMAR: [Firmware Bug]: No firmware reserved region can cover this RMRR [0x000000007a000000-0x000000007e7fffff], contact BIOS vendor for fixes

[    0.054086] DMAR: [Firmware Bug]: Your BIOS is broken; bad RMRR [0x000000007a000000-0x000000007e7fffff]

[    0.149533] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query honored via cmdline

[    1.423201] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/hainan_pfp.bin

[    1.423214] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/hainan_me.bin

[    1.423226] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/hainan_ce.bin

[    1.423239] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/hainan_rlc.bin

[    1.423255] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/hainan_mc.bin

[    1.423274] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/hainan_k_smc.bin

[    1.638099] i915 0000:00:02.0: firmware: direct-loading firmware i915/skl_dmc_ver1_27.bin

[    1.638360] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27)

[   12.814841] platform regulatory.0: firmware: direct-loading firmware regulatory.db

[   12.877723] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s

[   13.196660] rtl8723be: Using firmware rtlwifi/rtl8723befw_36.bin

[   13.260525] rtl8723be 0000:03:00.0: firmware: direct-loading firmware rtlwifi/rtl8723befw_36.bin

[   16.225687] bluetooth hci0: firmware: direct-loading firmware rtl_bt/rtl8723b_fw.bin

[   16.225733] bluetooth hci0: firmware: failed to load rtl_bt/rtl8723b_config.bin (-2)

[   16.225737] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware

[   16.225746] bluetooth hci0: firmware: failed to load rtl_bt/rtl8723b_config.bin (-2)

[   16.225749] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2

[   18.713935] r8169 0000:02:00.0: firmware: direct-loading firmware rtl_nic/rtl8168g-3.fw

On voit que ds firmwares radeon et intel sont chargés.
Je vois des erreurs sur le bluetooth, si quelqu'un sait au passage le résoudre, je prends. Il me semblait que DFiso avait tous les firmwares inclus.

dmesg | tail -30

[  569.345588] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08

[  569.345590] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c

[  569.345592] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10

[  569.519675] debugfs: File 'radeon_ring_gfx' in directory '0' already present!

[  569.519683] debugfs: File 'radeon_ring_cp1' in directory '0' already present!

[  569.519685] debugfs: File 'radeon_ring_cp2' in directory '0' already present!

[  569.519687] debugfs: File 'radeon_ring_dma1' in directory '0' already present!

[  569.519690] debugfs: File 'radeon_ring_dma2' in directory '0' already present!

[  569.870841] [drm:r600_ring_test [radeon]] *ERROR* radeon: ring 0 test failed (scratch(0x850C)=0xCAFEDEAD)

[  569.870884] [drm:si_resume [radeon]] *ERROR* si startup failed on resume

[  656.481805] [drm:atom_op_jump [radeon]] *ERROR* atombios stuck in loop for more than 5secs aborting

[  656.481839] [drm:atom_execute_table_locked [radeon]] *ERROR* atombios stuck executing 69A0 (len 254, WS 0, PS 4) @ 0x69AE

[  656.481864] [drm:atom_execute_table_locked [radeon]] *ERROR* atombios stuck executing 630C (len 78, WS 12, PS 8) @ 0x6345

[  656.488166] [drm] PCIE gen 3 link speeds already enabled

[  656.831018] radeon 0000:01:00.0: Wait for MC idle timedout !

[  657.002383] radeon 0000:01:00.0: Wait for MC idle timedout !

[  657.011012] [drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).

[  657.011105] radeon 0000:01:00.0: WB enabled

[  657.011107] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00

[  657.011109] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04

[  657.011110] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08

[  657.011112] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c

[  657.011113] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10

[  657.185240] debugfs: File 'radeon_ring_gfx' in directory '0' already present!

[  657.185247] debugfs: File 'radeon_ring_cp1' in directory '0' already present!

[  657.185250] debugfs: File 'radeon_ring_cp2' in directory '0' already present!

[  657.185252] debugfs: File 'radeon_ring_dma1' in directory '0' already present!

[  657.185254] debugfs: File 'radeon_ring_dma2' in directory '0' already present!

[  657.537841] [drm:r600_ring_test [radeon]] *ERROR* radeon: ring 0 test failed (scratch(0x850C)=0xCAFEDEAD)

[  657.537904] [drm:si_resume [radeon]] *ERROR* si startup failed on resume

Comment faire pour gérer ces deux cartes sur Debian ? Ou comment faire "disparaitre" (sans ouvrir le PC) l'une des deux cartes pour qu'il n'y ait plus de souci (si c'est une bonne idée d'en faire disparaitre une)
Merci

èfpé · 25-12-2023 22:00:42

chalu a écrit :

Je vois des erreurs sur le bluetooth, [...]. Il me semblait que DFiso avait tous les firmwares inclus.

Non ; mais là n'est pas le souci. Si ce firmware existait il serait fourni par le paquet firmware-realtek.
Le firmware rtl8723b_config.bin n'existe juste pas, en amont, la question est, le BT fonctionne-t-il ?

chalu a écrit :

Comment faire pour gérer ces deux cartes sur Debian ?

Dans un premier temps avec la variable d'environnement DRI_PRIME (pour faire la part des choses).

apt install switcheroo-control vainfo

switcherooctl list

DRI_PRIME=X vainfo

La commande switcherooctl va indiquer le GPU utilisé par défaut (Radeon semble-t-il) ; à confirmer :

lspci -nnkd ::0300

lspci -nnkd ::0380

cat /var/log/Xorg.0.log

Le GPU Radeon (R600) semble plutôt mal pris en charge. Le BIOS/EFI te permet-il de le désactiver ?
edit: selon sa description, le paquet switcheroo-control force l'utilisation par défaut du GPU intégré.

Dernière modification par èfpé (27-12-2023 12:10:42)

nifseg · 27-12-2023 15:58:10

Juste un petite question les headers de ton noyau sont bien installés ?
Pour le savoir

dpkg --get-selections | grep ^linux

chalu · 27-12-2023 17:07:40

Bonjour et merci de vos réponses

Oui les headers sont installés par défaut avec l'iso DF

dpkg --get-selections | grep ^linux

linux-base          install

linux-compiler-gcc-12-x86     install

linux-headers-6.1.0-16-amd64      install

linux-headers-6.1.0-16-common     install

linux-headers-amd64       install

linux-image-6.1.0-16-amd64      install

linux-image-amd64       install

linux-kbuild-6.1        install

linux-libc-dev:amd64        install

èfpé a écrit :

Le GPU Radeon (R600) semble plutôt mal pris en charge. Le BIOS/EFI te permet-il de le désactiver ?

Je ne l'ai pas trouvé dans le BIOS.
Les retours des commandes :

switcherooctl list

Device: 0

  Name:        Intel Corporation HD Graphics 530

  Default:     yes

  Environment: DRI_PRIME=pci-0000_00_02_0

Device: 1

  Name:        Advanced Micro Devices, Inc. [AMD®/ATI] Jet PRO [Radeon R5 M230 / R7 M260DX / Radeon 520/610 Mobile]

  Default:     no

  Environment: DRI_PRIME=pci-0000_01_00_0

DRI_PRIME=X vainfo

libva info: VA-API version 1.17.0

libva info: Trying to open /usr/lib/x86_64-linux-gnu/dri/iHD_drv_video.so

libva info: Found init function __vaDriverInit_1_17

libva info: va_openDriver() returns 0

vainfo: VA-API version: 1.17 (libva 2.12.0)

vainfo: Driver version: Intel iHD driver for Intel(R) Gen Graphics - 23.1.1 ()

vainfo: Supported profile and entrypoints

      VAProfileMPEG2Simple            : VAEntrypointVLD

      VAProfileMPEG2Main              : VAEntrypointVLD

      VAProfileH264Main               : VAEntrypointVLD

      VAProfileH264Main               : VAEntrypointEncSliceLP

      VAProfileH264High               : VAEntrypointVLD

      VAProfileH264High               : VAEntrypointEncSliceLP

      VAProfileJPEGBaseline           : VAEntrypointVLD

      VAProfileJPEGBaseline           : VAEntrypointEncPicture

      VAProfileH264ConstrainedBaseline: VAEntrypointVLD

      VAProfileH264ConstrainedBaseline: VAEntrypointEncSliceLP

      VAProfileVP8Version0_3          : VAEntrypointVLD

      VAProfileHEVCMain               : VAEntrypointVLD

lspci -nnkd ::0300

00:02.0 VGA compatible controller [0300]: Intel Corporation HD Graphics 530 [8086:1912] (rev 06)

  DeviceName:  Onboard IGD

  Subsystem: Hewlett-Packard Company HD Graphics 530 [103c:81b4]

  Kernel driver in use: i915

  Kernel modules: i915

lspci -nnkd ::0380

01:00.0 Display controller [0380]: Advanced Micro Devices, Inc. [AMD/ATI] Jet PRO [Radeon R5 M230 / R7 M260DX / Radeon 520/610 Mobile] [1002:6665] (rev 83)

  Subsystem: Pegatron Jet PRO [Radeon R5 M230 / R7 M260DX / Radeon 520/610 Mobile] [1b0a:90f1]

  Kernel driver in use: radeon

  Kernel modules: radeon, amdgpu

cat /var/log/Xorg.0.log

[    28.711] 

X.Org X Server 1.21.1.7

X Protocol Version 11, Revision 0

[    28.712] Current Operating System: Linux HP-460p001nf 6.1.0-16-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.67-1 (2023-12-12) x86_64

[    28.712] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.1.0-16-amd64 root=UUID=925e840e-0f75-4f25-a8d9-653e85be793d ro acpi_osi=Linux quiet splash resume=UUID=e5bd2d15-dc0b-4276-8653-78ec91f6477a splash

[    28.712] xorg-server 2:21.1.7-3+deb12u4 (https://www.debian.org/support) 

[    28.712] Current version of pixman: 0.42.2

[    28.712]  Before reporting problems, check http://wiki.x.org

  to make sure that you have the latest version.

[    28.712] Markers: (--) probed, (**) from config file, (==) default setting,

  (++) from command line, (!!) notice, (II) informational,

  (WW) warning, (EE) error, (NI) not implemented, (??) unknown.

[    28.712] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Dec 27 16:09:10 2023

[    28.871] (==) Using config directory: "/etc/X11/xorg.conf.d"

[    28.871] (==) Using system config directory "/usr/share/X11/xorg.conf.d"

[    29.116] (==) No Layout section.  Using the first Screen section.

[    29.116] (==) No screen section available. Using defaults.

[    29.116] (**) |-->Screen "Default Screen Section" (0)

[    29.116] (**) |   |-->Monitor "<default monitor>"

[    29.133] (==) No monitor specified for screen "Default Screen Section".

  Using a default monitor configuration.

[    29.133] (==) Automatically adding devices

[    29.133] (==) Automatically enabling devices

[    29.133] (==) Automatically adding GPU devices

[    29.133] (==) Automatically binding GPU devices

[    29.133] (==) Max clients allowed: 256, resource mask: 0x1fffff

[    29.393] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.

[    29.393]  Entry deleted from font path.

[    29.630] (==) FontPath set to:

  /usr/share/fonts/X11/misc,

  /usr/share/fonts/X11/100dpi/:unscaled,

  /usr/share/fonts/X11/75dpi/:unscaled,

  /usr/share/fonts/X11/Type1,

  /usr/share/fonts/X11/100dpi,

  /usr/share/fonts/X11/75dpi,

  built-ins

[    29.630] (==) ModulePath set to "/usr/lib/xorg/modules"

[    29.630] (II) The server relies on udev to provide the list of input devices.

  If no devices become available, reconfigure udev or disable AutoAddDevices.

[    29.630] (II) Loader magic: 0x558633d96f00

[    29.630] (II) Module ABI versions:

[    29.630]  X.Org ANSI C Emulation: 0.4

[    29.630]  X.Org Video Driver: 25.2

[    29.630]  X.Org XInput driver : 24.4

[    29.630]  X.Org Server Extension : 10.0

[    29.630] (++) using VT number 7

[    29.630] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration

[    29.631] (II) xfree86: Adding drm device (/dev/dri/card0)

[    29.631] (II) Platform probe for /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0

[    29.632] (II) xfree86: Adding drm device (/dev/dri/card1)

[    29.632] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card1

[    29.635] (--) PCI:*(0@0:2:0) 8086:1912:103c:81b4 rev 6, Mem @ 0xde000000/16777216, 0xb0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072

[    29.635] (--) PCI: (1@0:0:0) 1002:6665:1b0a:90f1 rev 131, Mem @ 0xc0000000/268435456, 0xdf200000/262144, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072

[    29.637] (II) LoadModule: "glx"

[    29.641] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so

[    29.763] (II) Module glx: vendor="X.Org Foundation"

[    29.763]  compiled for 1.21.1.7, module version = 1.0.0

[    29.763]  ABI class: X.Org Server Extension, version 10.0

[    29.763] (II) Applying OutputClass "Radeon" to /dev/dri/card0

[    29.763]  loading driver: radeon

[    29.763] (==) Matched radeon as autoconfigured driver 0

[    29.763] (==) Matched ati as autoconfigured driver 1

[    29.763] (==) Matched modesetting as autoconfigured driver 2

[    29.763] (==) Matched fbdev as autoconfigured driver 3

[    29.763] (==) Matched vesa as autoconfigured driver 4

[    29.763] (==) Assigned the driver to the xf86ConfigLayout

[    29.763] (II) LoadModule: "radeon"

[    29.763] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so

[    29.869] (II) Module radeon: vendor="X.Org Foundation"

[    29.869]  compiled for 1.21.1.3, module version = 19.1.0

[    29.869]  Module class: X.Org Video Driver

[    29.869]  ABI class: X.Org Video Driver, version 25.2

[    29.869] (II) LoadModule: "ati"

[    29.869] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so

[    29.876] (II) Module ati: vendor="X.Org Foundation"

[    29.876]  compiled for 1.21.1.3, module version = 19.1.0

[    29.876]  Module class: X.Org Video Driver

[    29.876]  ABI class: X.Org Video Driver, version 25.2

[    29.876] (II) LoadModule: "modesetting"

[    29.876] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so

[    29.910] (II) Module modesetting: vendor="X.Org Foundation"

[    29.910]  compiled for 1.21.1.7, module version = 1.21.1

[    29.910]  Module class: X.Org Video Driver

[    29.910]  ABI class: X.Org Video Driver, version 25.2

[    29.910] (II) LoadModule: "fbdev"

[    29.911] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so

[    29.911] (II) Module fbdev: vendor="X.Org Foundation"

[    29.911]  compiled for 1.21.1.3, module version = 0.5.0

[    29.911]  Module class: X.Org Video Driver

[    29.911]  ABI class: X.Org Video Driver, version 25.2

[    29.911] (II) LoadModule: "vesa"

[    29.911] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so

[    29.912] (II) Module vesa: vendor="X.Org Foundation"

[    29.912]  compiled for 1.21.1.3, module version = 2.5.0

[    29.912]  Module class: X.Org Video Driver

[    29.912]  ABI class: X.Org Video Driver, version 25.2

[    29.912] (II) RADEON: Driver for ATI/AMD Radeon chipsets:

  ATI Radeon Mobility X600 (M24), ATI FireMV 2400,

  ATI Radeon Mobility X300 (M24), ATI FireGL M24 GL,

  ATI Radeon X600 (RV380), ATI FireGL V3200 (RV380),

  ATI Radeon IGP320 (A3), ATI Radeon IGP330/340/350 (A4),

  ATI Radeon 9500, ATI Radeon 9600TX, ATI FireGL Z1, ATI Radeon 9800SE,

  ATI Radeon 9800, ATI FireGL X2, ATI Radeon 9600, ATI Radeon 9600SE,

  ATI Radeon 9600XT, ATI FireGL T2, ATI Radeon 9650, ATI FireGL RV360,

  ATI Radeon 7000 IGP (A4+), ATI Radeon 8500 AIW,

  ATI Radeon IGP320M (U1), ATI Radeon IGP330M/340M/350M (U2),

  ATI Radeon Mobility 7000 IGP, ATI Radeon 9000/PRO, ATI Radeon 9000,

  ATI Radeon X800 (R420), ATI Radeon X800PRO (R420),

  ATI Radeon X800SE (R420), ATI FireGL X3 (R420),

  ATI Radeon Mobility 9800 (M18), ATI Radeon X800 SE (R420),

  ATI Radeon X800XT (R420), ATI Radeon X800 VE (R420),

  ATI Radeon X850 (R480), ATI Radeon X850 XT (R480),

  ATI Radeon X850 SE (R480), ATI Radeon X850 PRO (R480),

  ATI Radeon X850 XT PE (R480), ATI Radeon Mobility M7,

  ATI Mobility FireGL 7800 M7, ATI Radeon Mobility M6,

  ATI FireGL Mobility 9000 (M9), ATI Radeon Mobility 9000 (M9),

  ATI Radeon 9700 Pro, ATI Radeon 9700/9500Pro, ATI FireGL X1,

  ATI Radeon 9800PRO, ATI Radeon 9800XT,

  ATI Radeon Mobility 9600/9700 (M10/M11),

  ATI Radeon Mobility 9600 (M10), ATI Radeon Mobility 9600 (M11),

  ATI FireGL Mobility T2 (M10), ATI FireGL Mobility T2e (M11),

  ATI Radeon, ATI FireGL 8700/8800, ATI Radeon 8500, ATI Radeon 9100,

  ATI Radeon 7500, ATI Radeon VE/7000, ATI ES1000,

  ATI Radeon Mobility X300 (M22), ATI Radeon Mobility X600 SE (M24C),

  ATI FireGL M22 GL, ATI Radeon X800 (R423), ATI Radeon X800PRO (R423),

  ATI Radeon X800LE (R423), ATI Radeon X800SE (R423),

  ATI Radeon X800 XTP (R430), ATI Radeon X800 XL (R430),

  ATI Radeon X800 SE (R430), ATI Radeon X800 (R430),

  ATI FireGL V7100 (R423), ATI FireGL V5100 (R423),

  ATI FireGL unknown (R423), ATI Mobility FireGL V5000 (M26),

  ATI Mobility Radeon X700 XL (M26), ATI Mobility Radeon X700 (M26),

  ATI Radeon X550XTX, ATI Radeon 9100 IGP (A5),

  ATI Radeon Mobility 9100 IGP (U3), ATI Radeon XPRESS 200,

  ATI Radeon XPRESS 200M, ATI Radeon 9250, ATI Radeon 9200,

  ATI Radeon 9200SE, ATI FireMV 2200, ATI Radeon X300 (RV370),

  ATI Radeon X600 (RV370), ATI Radeon X550 (RV370),

  ATI FireGL V3100 (RV370), ATI FireMV 2200 PCIE (RV370),

  ATI Radeon Mobility 9200 (M9+), ATI Mobility Radeon X800 XT (M28),

  ATI Mobility FireGL V5100 (M28), ATI Mobility Radeon X800 (M28),

  ATI Radeon X850, ATI unknown Radeon / FireGL (R480),

  ATI Radeon X800XT (R423), ATI FireGL V5000 (RV410),

  ATI Radeon X700 XT (RV410), ATI Radeon X700 PRO (RV410),

  ATI Radeon X700 SE (RV410), ATI Radeon X700 (RV410),

  ATI Radeon X1800, ATI Mobility Radeon X1800 XT,

  ATI Mobility Radeon X1800, ATI Mobility FireGL V7200,

  ATI FireGL V7200, ATI FireGL V5300, ATI Mobility FireGL V7100,

  ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,

  ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,

  ATI Mobility Radeon X1400, ATI Radeon X1550 64-bit,

  ATI Mobility Radeon X1300, ATI Radeon X1300, ATI FireGL V3300,

  ATI FireGL V3350, ATI Mobility Radeon X1450,

  ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,

  ATI FireMV 2250, ATI Radeon X1650, ATI Mobility FireGL V5200,

  ATI Mobility Radeon X1600, ATI Radeon X1300 XT/X1600 Pro,

  ATI FireGL V3400, ATI Mobility FireGL V5250,

  ATI Mobility Radeon X1700, ATI Mobility Radeon X1700 XT,

  ATI FireGL V5200, ATI Radeon X2300HD, ATI Mobility Radeon HD 2300,

  ATI Radeon X1950, ATI Radeon X1900, ATI AMD Stream Processor,

  ATI RV560, ATI Mobility Radeon X1900, ATI Radeon X1950 GT, ATI RV570,

  ATI FireGL V7400, ATI Radeon 9100 PRO IGP,

  ATI Radeon Mobility 9200 IGP, ATI Radeon X1200, ATI RS740,

  ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro,

  ATI Radeon HD 2900 GT, ATI FireGL V8650, ATI FireGL V8600,

  ATI FireGL V7600, ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,

  ATI Radeon HD 4850 x2, ATI FirePro V8750 (FireGL),

  ATI FirePro V7760 (FireGL), ATI Mobility RADEON HD 4850,

  ATI Mobility RADEON HD 4850 X2, ATI FirePro RV770,

  AMD FireStream 9270, AMD FireStream 9250, ATI FirePro V8700 (FireGL),

  ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,

  ATI FirePro M7750, ATI M98, ATI Mobility Radeon HD 4650,

  ATI Radeon RV730 (AGP), ATI Mobility Radeon HD 4670,

  ATI FirePro M5750, ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,

  ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],

  ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),

  ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,

  ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,

  ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI RV610,

  ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro,

  ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI Radeon HD 2350,

  ATI Mobility Radeon HD 2400 XT, ATI Mobility Radeon HD 2400,

  ATI RADEON E2400, ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,

  ATI Mobility Radeon HD 3850, ATI Radeon HD3850,

  ATI Mobility Radeon HD 3850 X2, ATI Mobility Radeon HD 3870,

  ATI Mobility Radeon HD 3870 X2, ATI Radeon HD3870 X2,

  ATI FireGL V7700, ATI Radeon HD3690, AMD Firestream 9170,

  ATI Radeon HD 4550, ATI Radeon RV710, ATI Radeon HD 4350,

  ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,

  ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,

  ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,

  ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,

  ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,

  ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,

  ATI FireGL V3600, ATI Radeon HD 2600 LE,

  ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,

  ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,

  ATI Radeon HD 3450, ATI Radeon HD 3430, ATI FirePro V3700,

  ATI FireMV 2450, ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,

  ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,

  ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,

  ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,

  ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,

  ATI Radeon HD 3300 Graphics, ATI Radeon 3000 Graphics, SUMO, SUMO2,

  ATI Radeon HD 4200, ATI Radeon 4100, ATI Mobility Radeon HD 4200,

  ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,

  AMD Radeon HD 6310 Graphics, AMD Radeon HD 6250 Graphics,

  AMD Radeon HD 6300 Series Graphics,

  AMD Radeon HD 6200 Series Graphics, PALM, CYPRESS,

  ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,

  AMD Firestream 9350, ATI Radeon HD 5800 Series,

  ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,

  ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,

  ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,

  ATI Radeon HD 5670, ATI Radeon HD 5570, ATI Radeon HD 5500 Series,

  REDWOOD, ATI Mobility Radeon Graphics, CEDAR, ATI FirePro 2270,

  ATI Radeon HD 5450, CAYMAN, AMD Radeon HD 6900 Series,

  AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series, BARTS,

  AMD Radeon HD 6800 Series, AMD Radeon HD 6700 Series, TURKS, CAICOS,

  ARUBA, TAHITI, PITCAIRN, VERDE, OLAND, HAINAN, BONAIRE, KABINI,

  MULLINS, KAVERI, HAWAII

[    29.915] (II) modesetting: Driver for Modesetting Kernel Drivers: kms

[    29.915] (II) FBDEV: driver for framebuffer: fbdev

[    29.915] (II) VESA: driver for VESA chipsets: vesa

[    29.935] xf86EnableIO: failed to enable I/O ports 0000-03ff (Operation not permitted)

[    29.949] (II) modeset(0): using drv /dev/dri/card1

[    29.949] (WW) Falling back to old probe method for fbdev

[    29.949] (II) Loading sub module "fbdevhw"

[    29.949] (II) LoadModule: "fbdevhw"

[    29.949] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so

[    29.960] (II) Module fbdevhw: vendor="X.Org Foundation"

[    29.960]  compiled for 1.21.1.7, module version = 0.0.2

[    29.960]  ABI class: X.Org Video Driver, version 25.2

[    29.961] (II) [KMS] Kernel modesetting enabled.

[    29.961] (II) modeset(0): Creating default Display subsection in Screen section

  "Default Screen Section" for depth/fbbpp 24/32

[    29.961] (==) modeset(0): Depth 24, (==) framebuffer bpp 32

[    29.961] (==) modeset(0): RGB weight 888

[    29.961] (==) modeset(0): Default visual is TrueColor

[    29.961] (II) Loading sub module "glamoregl"

[    29.961] (II) LoadModule: "glamoregl"

[    29.961] (II) Loading /usr/lib/xorg/modules/libglamoregl.so

[    29.986] (II) Module glamoregl: vendor="X.Org Foundation"

[    29.986]  compiled for 1.21.1.7, module version = 1.0.1

[    29.986]  ABI class: X.Org ANSI C Emulation, version 0.4

[    33.975] (II) modeset(0): glamor X acceleration enabled on Mesa Intel(R) HD Graphics 530 (SKL GT2)

[    33.975] (II) modeset(0): glamor initialized

[    33.975] (==) modeset(0): VariableRefresh: disabled

[    33.975] (==) modeset(0): AsyncFlipSecondaries: disabled

[    33.979] (II) modeset(0): Output HDMI-1 has no monitor section

[    33.995] (II) modeset(0): Output DP-1 has no monitor section

[    33.999] (II) modeset(0): EDID for output HDMI-1

[    34.014] (II) modeset(0): EDID for output DP-1

[    34.014] (II) modeset(0): Manufacturer: PHL  Model: c0cf  Serial#: 22536

[    34.014] (II) modeset(0): Year: 2016  Week: 24

[    34.014] (II) modeset(0): EDID Version: 1.4

[    34.014] (II) modeset(0): Digital Display Input

[    34.014] (II) modeset(0): 8 bits per channel

[    34.014] (II) modeset(0): Digital interface is DisplayPort

[    34.014] (II) modeset(0): Max Image Size [cm]: horiz.: 48  vert.: 27

[    34.014] (II) modeset(0): Gamma: 2.20

[    34.014] (II) modeset(0): DPMS capabilities: Off

[    34.014] (II) modeset(0): Supported color encodings: RGB 4:4:4 

[    34.014] (II) modeset(0): First detailed timing is preferred mode

[    34.014] (II) modeset(0): Preferred mode is native pixel format and refresh rate

[    34.014] (II) modeset(0): redX: 0.633 redY: 0.351   greenX: 0.322 greenY: 0.630

[    34.014] (II) modeset(0): blueX: 0.152 blueY: 0.050   whiteX: 0.313 whiteY: 0.329

[    34.014] (II) modeset(0): Supported established timings:

[    34.014] (II) modeset(0): 720x400@70Hz

[    34.014] (II) modeset(0): 640x480@60Hz

[    34.014] (II) modeset(0): 640x480@67Hz

[    34.014] (II) modeset(0): 640x480@72Hz

[    34.014] (II) modeset(0): 640x480@75Hz

[    34.014] (II) modeset(0): 800x600@60Hz

[    34.014] (II) modeset(0): 800x600@75Hz

[    34.014] (II) modeset(0): 1024x768@60Hz

[    34.014] (II) modeset(0): 1024x768@75Hz

[    34.014] (II) modeset(0): 1280x1024@75Hz

[    34.014] (II) modeset(0): Manufacturer's mask: 0

[    34.014] (II) modeset(0): Supported standard timings:

[    34.014] (II) modeset(0): #0: hsize: 1920  vsize 1080  refresh: 60  vid: 49361

[    34.014] (II) modeset(0): #1: hsize: 1440  vsize 900  refresh: 60  vid: 149

[    34.014] (II) modeset(0): #2: hsize: 1440  vsize 900  refresh: 75  vid: 3989

[    34.014] (II) modeset(0): #3: hsize: 1680  vsize 1050  refresh: 60  vid: 179

[    34.014] (II) modeset(0): #4: hsize: 1280  vsize 720  refresh: 60  vid: 49281

[    34.014] (II) modeset(0): #5: hsize: 1280  vsize 1024  refresh: 60  vid: 32897

[    34.014] (II) modeset(0): Supported detailed timing:

[    34.014] (II) modeset(0): clock: 148.5 MHz   Image Size:  477 x 268 mm

[    34.015] (II) modeset(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0

[    34.015] (II) modeset(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0

[    34.015] (II) modeset(0): Serial No: ZV01624022536

[    34.015] (II) modeset(0): Monitor name: PHL 223V5

[    34.015] (II) modeset(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz

[    34.015] (II) modeset(0): EDID (in hex):

[    34.015] (II) modeset(0):   00ffffffffffff00410ccfc008580000

[    34.015] (II) modeset(0):   181a0104a5301b78223935a25952a127

[    34.015] (II) modeset(0):   0c5054bd4b00d1c09500950fb30081c0

[    34.015] (II) modeset(0):   818001010101023a801871382d40582c

[    34.015] (II) modeset(0):   4500dd0c1100001e000000ff005a5630

[    34.015] (II) modeset(0):   31363234303232353336000000fc0050

[    34.015] (II) modeset(0):   484c2032323356350a202020000000fd

[    34.015] (II) modeset(0):   00384c1e5311000a2020202020200009

[    34.015] (II) modeset(0): Printing probed modes for output DP-1

[    34.015] (II) modeset(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)

[    34.015] (II) modeset(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)

[    34.015] (II) modeset(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)

[    34.015] (II) modeset(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)

[    34.015] (II) modeset(0): Modeline "1440x900"x75.0  136.75  1440 1536 1688 1936  900 903 909 942 -hsync +vsync (70.6 kHz e)

[    34.015] (II) modeset(0): Modeline "1440x900"x59.9  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz e)

[    34.015] (II) modeset(0): Modeline "1280x720"x60.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)

[    34.015] (II) modeset(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)

[    34.015] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)

[    34.015] (II) modeset(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)

[    34.015] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)

[    34.015] (II) modeset(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)

[    34.015] (II) modeset(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)

[    34.015] (II) modeset(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)

[    34.015] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)

[    34.015] (II) modeset(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)

[    34.015] (II) modeset(0): Output HDMI-1 disconnected

[    34.015] (II) modeset(0): Output DP-1 connected

[    34.015] (II) modeset(0): Using exact sizes for initial modes

[    34.015] (II) modeset(0): Output DP-1 using initial mode 1920x1080 +0+0

[    34.015] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)

[    34.015] (==) modeset(0): DPI set to (96, 96)

[    34.015] (II) Loading sub module "fb"

[    34.015] (II) LoadModule: "fb"

[    34.015] (II) Module "fb" already built-in

[    34.050] (==) RADEON(G0): Depth 24, (--) framebuffer bpp 32

[    34.050] (II) RADEON(G0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)

[    34.050] (==) RADEON(G0): Default visual is TrueColor

[    34.051] (==) RADEON(G0): RGB weight 888

[    34.051] (II) RADEON(G0): Using 8 bits per RGB (8 bit DAC)

[    34.051] (--) RADEON(G0): Chipset: "HAINAN" (ChipID = 0x6665)

[    34.051] (II) Loading sub module "fb"

[    34.051] (II) LoadModule: "fb"

[    34.051] (II) Module "fb" already built-in

[    34.051] (II) RADEON(G0): GPU accel disabled or not working, using shadowfb for KMS

[    34.051] (II) Loading sub module "shadow"

[    34.051] (II) LoadModule: "shadow"

[    34.051] (II) Loading /usr/lib/xorg/modules/libshadow.so

[    34.089] (II) Module shadow: vendor="X.Org Foundation"

[    34.089]  compiled for 1.21.1.7, module version = 1.1.0

[    34.089]  ABI class: X.Org ANSI C Emulation, version 0.4

[    34.090] (II) RADEON(G0): KMS Color Tiling: disabled

[    34.090] (II) RADEON(G0): KMS Color Tiling 2D: disabled

[    34.090] (II) RADEON(G0): mem size init: gart size :7fbcf000 vram size: s:10000000 visible:fbbe000

[    34.090] (II) RADEON(G0): EXA: Driver will allow EXA pixmaps in VRAM

[    34.090] (==) RADEON(G0): DPI set to (96, 96)

[    34.090] (==) RADEON(G0): Using gamma correction (1.0, 1.0, 1.0)

[    34.090] (II) Loading sub module "ramdac"

[    34.090] (II) LoadModule: "ramdac"

[    34.090] (II) Module "ramdac" already built-in

[    34.090] (II) UnloadModule: "fbdev"

[    34.090] (II) Unloading fbdev

[    34.090] (II) UnloadSubModule: "fbdevhw"

[    34.090] (II) Unloading fbdevhw

[    34.090] (II) UnloadModule: "vesa"

[    34.090] (II) Unloading vesa

[    34.478] (==) modeset(0): Backing store enabled

[    34.478] (==) modeset(0): Silken mouse enabled

[    34.549] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.

[    34.550] (==) modeset(0): DPMS enabled

[    34.550] (II) modeset(0): [DRI2] Setup complete

[    34.550] (II) modeset(0): [DRI2]   DRI driver: iris

[    34.550] (II) modeset(0): [DRI2]   VDPAU driver: va_gl

[    34.550] (II) RADEON(G0): Front buffer size: 3072K

[    34.550] (II) RADEON(G0): VRAM usage limit set to 229240K

[    34.551] (==) RADEON(G0): Backing store enabled

[    34.551] (WW) RADEON(G0): Direct rendering disabled

[    34.551] (II) RADEON(G0): Acceleration disabled

[    34.551] (==) RADEON(G0): DPMS enabled

[    34.551] (==) RADEON(G0): Silken mouse enabled

[    34.551] (II) Initializing extension Generic Event Extension

[    34.551] (II) Initializing extension SHAPE

[    34.552] (II) Initializing extension MIT-SHM

[    34.552] (II) Initializing extension XInputExtension

[    34.553] (II) Initializing extension XTEST

[    34.553] (II) Initializing extension BIG-REQUESTS

[    34.553] (II) Initializing extension SYNC

[    34.554] (II) Initializing extension XKEYBOARD

[    34.554] (II) Initializing extension XC-MISC

[    34.554] (II) Initializing extension SECURITY

[    34.555] (II) Initializing extension XFIXES

[    34.555] (II) Initializing extension RENDER

[    34.555] (II) Initializing extension RANDR

[    34.556] (II) Initializing extension COMPOSITE

[    34.556] (II) Initializing extension DAMAGE

[    34.557] (II) Initializing extension MIT-SCREEN-SAVER

[    34.557] (II) Initializing extension DOUBLE-BUFFER

[    34.557] (II) Initializing extension RECORD

[    34.558] (II) Initializing extension DPMS

[    34.558] (II) Initializing extension Present

[    34.558] (II) Initializing extension DRI3

[    34.559] (II) Initializing extension X-Resource

[    34.559] (II) Initializing extension XVideo

[    34.559] (II) Initializing extension XVideo-MotionCompensation

[    34.559] (II) Initializing extension SELinux

[    34.559] (II) SELinux: Disabled on system

[    34.559] (II) Initializing extension GLX

[    34.579] (II) AIGLX: Loaded and initialized iris

[    34.579] (II) GLX: Initialized DRI2 GL provider for screen 0

[    34.579] (II) Initializing extension XFree86-VidModeExtension

[    34.580] (II) Initializing extension XFree86-DGA

[    34.580] (II) Initializing extension XFree86-DRI

[    34.580] (II) Initializing extension DRI2

[    34.582] (II) modeset(0): Damage tracking initialized

[    34.582] (II) modeset(0): Setting screen physical size to 508 x 285

[    35.093] (II) config/udev: Adding input device Power Button (/dev/input/event2)

[    35.093] (**) Power Button: Applying InputClass "libinput keyboard catchall"

[    35.093] (**) Power Button: Applying InputClass "system-keyboard"

[    35.093] (II) LoadModule: "libinput"

[    35.097] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so

[    35.143] (II) Module libinput: vendor="X.Org Foundation"

[    35.143]  compiled for 1.21.1.3, module version = 1.2.1

[    35.143]  Module class: X.Org XInput Driver

[    35.143]  ABI class: X.Org XInput driver, version 24.4

[    35.143] (II) Using input driver 'libinput' for 'Power Button'

[    35.143] (**) Power Button: always reports core events

[    35.143] (**) Option "Device" "/dev/input/event2"

[    35.183] (II) event2  - Power Button: is tagged by udev as: Keyboard

[    35.183] (II) event2  - Power Button: device is a keyboard

[    35.183] (II) event2  - Power Button: device removed

[    35.208] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event2"

[    35.208] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)

[    35.208] (**) Option "xkb_model" "pc105"

[    35.208] (**) Option "xkb_layout" "fr"

[    35.208] (**) Option "xkb_variant" "azerty"

[    35.236] (II) event2  - Power Button: is tagged by udev as: Keyboard

[    35.236] (II) event2  - Power Button: device is a keyboard

[    35.236] (II) config/udev: Adding input device Video Bus (/dev/input/event3)

[    35.236] (**) Video Bus: Applying InputClass "libinput keyboard catchall"

[    35.236] (**) Video Bus: Applying InputClass "system-keyboard"

[    35.236] (II) Using input driver 'libinput' for 'Video Bus'

[    35.236] (**) Video Bus: always reports core events

[    35.236] (**) Option "Device" "/dev/input/event3"

[    35.237] (II) event3  - Video Bus: is tagged by udev as: Keyboard

[    35.237] (II) event3  - Video Bus: device is a keyboard

[    35.237] (II) event3  - Video Bus: device removed

[    35.296] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5/event3"

[    35.296] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)

[    35.296] (**) Option "xkb_model" "pc105"

[    35.296] (**) Option "xkb_layout" "fr"

[    35.296] (**) Option "xkb_variant" "azerty"

[    35.300] (II) event3  - Video Bus: is tagged by udev as: Keyboard

[    35.300] (II) event3  - Video Bus: device is a keyboard

[    35.302] (II) config/udev: Adding input device Power Button (/dev/input/event1)

[    35.302] (**) Power Button: Applying InputClass "libinput keyboard catchall"

[    35.302] (**) Power Button: Applying InputClass "system-keyboard"

[    35.302] (II) Using input driver 'libinput' for 'Power Button'

[    35.302] (**) Power Button: always reports core events

[    35.302] (**) Option "Device" "/dev/input/event1"

[    35.305] (II) event1  - Power Button: is tagged by udev as: Keyboard

[    35.305] (II) event1  - Power Button: device is a keyboard

[    35.305] (II) event1  - Power Button: device removed

[    35.320] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event1"

[    35.320] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)

[    35.320] (**) Option "xkb_model" "pc105"

[    35.320] (**) Option "xkb_layout" "fr"

[    35.320] (**) Option "xkb_variant" "azerty"

[    35.323] (II) event1  - Power Button: is tagged by udev as: Keyboard

[    35.323] (II) event1  - Power Button: device is a keyboard

[    35.325] (II) config/udev: Adding input device Sleep Button (/dev/input/event0)

[    35.326] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"

[    35.326] (**) Sleep Button: Applying InputClass "system-keyboard"

[    35.326] (II) Using input driver 'libinput' for 'Sleep Button'

[    35.326] (**) Sleep Button: always reports core events

[    35.326] (**) Option "Device" "/dev/input/event0"

[    35.328] (II) event0  - Sleep Button: is tagged by udev as: Keyboard

[    35.328] (II) event0  - Sleep Button: device is a keyboard

[    35.329] (II) event0  - Sleep Button: device removed

[    35.344] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event0"

[    35.344] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)

[    35.344] (**) Option "xkb_model" "pc105"

[    35.344] (**) Option "xkb_layout" "fr"

[    35.344] (**) Option "xkb_variant" "azerty"

[    35.347] (II) event0  - Sleep Button: is tagged by udev as: Keyboard

[    35.347] (II) event0  - Sleep Button: device is a keyboard

[    35.352] (II) config/udev: Adding input device PixArt HP X1200 USB Optical Mouse (/dev/input/event4)

[    35.352] (**) PixArt HP X1200 USB Optical Mouse: Applying InputClass "libinput pointer catchall"

[    35.352] (II) Using input driver 'libinput' for 'PixArt HP X1200 USB Optical Mouse'

[    35.352] (**) PixArt HP X1200 USB Optical Mouse: always reports core events

[    35.352] (**) Option "Device" "/dev/input/event4"

[    35.357] (II) event4  - PixArt HP X1200 USB Optical Mouse: is tagged by udev as: Mouse

[    35.357] (II) event4  - PixArt HP X1200 USB Optical Mouse: device set to 1100 DPI

[    35.357] (II) event4  - PixArt HP X1200 USB Optical Mouse: device is a pointer

[    35.358] (II) event4  - PixArt HP X1200 USB Optical Mouse: device removed

[    35.396] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:03F0:0641.0001/input/input6/event4"

[    35.396] (II) XINPUT: Adding extended input device "PixArt HP X1200 USB Optical Mouse" (type: MOUSE, id 10)

[    35.397] (**) Option "AccelerationScheme" "none"

[    35.397] (**) PixArt HP X1200 USB Optical Mouse: (accel) selected scheme none/0

[    35.397] (**) PixArt HP X1200 USB Optical Mouse: (accel) acceleration factor: 2.000

[    35.397] (**) PixArt HP X1200 USB Optical Mouse: (accel) acceleration threshold: 4

[    35.402] (II) event4  - PixArt HP X1200 USB Optical Mouse: is tagged by udev as: Mouse

[    35.402] (II) event4  - PixArt HP X1200 USB Optical Mouse: device set to 1100 DPI

[    35.402] (II) event4  - PixArt HP X1200 USB Optical Mouse: device is a pointer

[    35.405] (II) config/udev: Adding input device PixArt HP X1200 USB Optical Mouse (/dev/input/mouse0)

[    35.405] (II) No input driver specified, ignoring this device.

[    35.405] (II) This device may have been added with another device file.

[    35.408] (II) config/udev: Adding input device Chicony  USB Keyboard (/dev/input/event5)

[    35.408] (**) Chicony  USB Keyboard: Applying InputClass "libinput keyboard catchall"

[    35.408] (**) Chicony  USB Keyboard: Applying InputClass "system-keyboard"

[    35.408] (II) Using input driver 'libinput' for 'Chicony  USB Keyboard'

[    35.408] (**) Chicony  USB Keyboard: always reports core events

[    35.408] (**) Option "Device" "/dev/input/event5"

[    35.413] (II) event5  - Chicony  USB Keyboard: is tagged by udev as: Keyboard

[    35.413] (II) event5  - Chicony  USB Keyboard: device is a keyboard

[    35.413] (II) event5  - Chicony  USB Keyboard: device removed

[    35.428] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/0003:04F2:1516.0002/input/input7/event5"

[    35.428] (II) XINPUT: Adding extended input device "Chicony  USB Keyboard" (type: KEYBOARD, id 11)

[    35.428] (**) Option "xkb_model" "pc105"

[    35.428] (**) Option "xkb_layout" "fr"

[    35.428] (**) Option "xkb_variant" "azerty"

[    35.433] (II) event5  - Chicony  USB Keyboard: is tagged by udev as: Keyboard

[    35.434] (II) event5  - Chicony  USB Keyboard: device is a keyboard

[    35.437] (II) config/udev: Adding input device Chicony  USB Keyboard System Control (/dev/input/event6)

[    35.437] (**) Chicony  USB Keyboard System Control: Applying InputClass "libinput keyboard catchall"

[    35.437] (**) Chicony  USB Keyboard System Control: Applying InputClass "system-keyboard"

[    35.437] (II) Using input driver 'libinput' for 'Chicony  USB Keyboard System Control'

[    35.437] (**) Chicony  USB Keyboard System Control: always reports core events

[    35.437] (**) Option "Device" "/dev/input/event6"

[    35.442] (II) event6  - Chicony  USB Keyboard System Control: is tagged by udev as: Keyboard

[    35.442] (II) event6  - Chicony  USB Keyboard System Control: device is a keyboard

[    35.442] (II) event6  - Chicony  USB Keyboard System Control: device removed

[    35.456] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.1/0003:04F2:1516.0003/input/input8/event6"

[    35.456] (II) XINPUT: Adding extended input device "Chicony  USB Keyboard System Control" (type: KEYBOARD, id 12)

[    35.456] (**) Option "xkb_model" "pc105"

[    35.456] (**) Option "xkb_layout" "fr"

[    35.456] (**) Option "xkb_variant" "azerty"

[    35.461] (II) event6  - Chicony  USB Keyboard System Control: is tagged by udev as: Keyboard

[    35.462] (II) event6  - Chicony  USB Keyboard System Control: device is a keyboard

[    35.465] (II) config/udev: Adding input device Chicony  USB Keyboard Consumer Control (/dev/input/event7)

[    35.465] (**) Chicony  USB Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"

[    35.465] (**) Chicony  USB Keyboard Consumer Control: Applying InputClass "system-keyboard"

[    35.465] (II) Using input driver 'libinput' for 'Chicony  USB Keyboard Consumer Control'

[    35.465] (**) Chicony  USB Keyboard Consumer Control: always reports core events

[    35.465] (**) Option "Device" "/dev/input/event7"

[    35.470] (II) event7  - Chicony  USB Keyboard Consumer Control: is tagged by udev as: Keyboard

[    35.470] (II) event7  - Chicony  USB Keyboard Consumer Control: device is a keyboard

[    35.470] (II) event7  - Chicony  USB Keyboard Consumer Control: device removed

[    35.520] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.1/0003:04F2:1516.0003/input/input9/event7"

[    35.520] (II) XINPUT: Adding extended input device "Chicony  USB Keyboard Consumer Control" (type: KEYBOARD, id 13)

[    35.520] (**) Option "xkb_model" "pc105"

[    35.520] (**) Option "xkb_layout" "fr"

[    35.520] (**) Option "xkb_variant" "azerty"

[    35.526] (II) event7  - Chicony  USB Keyboard Consumer Control: is tagged by udev as: Keyboard

[    35.526] (II) event7  - Chicony  USB Keyboard Consumer Control: device is a keyboard

[    35.529] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event9)

[    35.529] (II) No input driver specified, ignoring this device.

[    35.529] (II) This device may have been added with another device file.

[    35.530] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event10)

[    35.530] (II) No input driver specified, ignoring this device.

[    35.530] (II) This device may have been added with another device file.

[    35.531] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event11)

[    35.531] (II) No input driver specified, ignoring this device.

[    35.531] (II) This device may have been added with another device file.

[    35.533] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event12)

[    35.533] (II) No input driver specified, ignoring this device.

[    35.533] (II) This device may have been added with another device file.

[    35.534] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event13)

[    35.534] (II) No input driver specified, ignoring this device.

[    35.534] (II) This device may have been added with another device file.

[    35.535] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event14)

[    35.535] (II) No input driver specified, ignoring this device.

[    35.535] (II) This device may have been added with another device file.

[    35.537] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event15)

[    35.537] (II) No input driver specified, ignoring this device.

[    35.537] (II) This device may have been added with another device file.

[    35.539] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event8)

[    35.539] (**) HP WMI hotkeys: Applying InputClass "libinput keyboard catchall"

[    35.539] (**) HP WMI hotkeys: Applying InputClass "system-keyboard"

[    35.539] (II) Using input driver 'libinput' for 'HP WMI hotkeys'

[    35.539] (**) HP WMI hotkeys: always reports core events

[    35.539] (**) Option "Device" "/dev/input/event8"

[    35.541] (II) event8  - HP WMI hotkeys: is tagged by udev as: Keyboard Switch

[    35.541] (II) event8  - HP WMI hotkeys: device is a keyboard

[    35.541] (II) event8  - HP WMI hotkeys: device removed

[    35.584] (**) Option "config_info" "udev:/sys/devices/virtual/input/input10/event8"

[    35.584] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 14)

[    35.584] (**) Option "xkb_model" "pc105"

[    35.584] (**) Option "xkb_layout" "fr"

[    35.584] (**) Option "xkb_variant" "azerty"

[    35.587] (II) event8  - HP WMI hotkeys: is tagged by udev as: Keyboard Switch

[    35.587] (II) event8  - HP WMI hotkeys: device is a keyboard

[   160.466] (II) modeset(0): EDID vendor "PHL", prod id 49359

[   160.466] (II) modeset(0): Using EDID range info for horizontal sync

[   160.466] (II) modeset(0): Using EDID range info for vertical refresh

[   160.466] (II) modeset(0): Printing DDC gathered Modelines:

[   160.466] (II) modeset(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)

[   160.466] (II) modeset(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)

[   160.466] (II) modeset(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)

[   160.466] (II) modeset(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)

[   160.466] (II) modeset(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)

[   160.466] (II) modeset(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)

[   160.466] (II) modeset(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)

[   160.466] (II) modeset(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)

[   160.466] (II) modeset(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)

[   160.466] (II) modeset(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)

[   160.466] (II) modeset(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)

[   160.466] (II) modeset(0): Modeline "1440x900"x0.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz e)

[   160.466] (II) modeset(0): Modeline "1440x900"x0.0  136.75  1440 1536 1688 1936  900 903 909 942 -hsync +vsync (70.6 kHz e)

[   160.466] (II) modeset(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)

[   160.466] (II) modeset(0): Modeline "1280x720"x60.0   74.48  1280 1336 1472 1664  720 721 724 746 -hsync +vsync (44.8 kHz e)

[   160.466] (II) modeset(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)

[   162.483] (II) modeset(0): EDID vendor "PHL", prod id 49359

[   162.483] (II) modeset(0): Using hsync ranges from config file

[   162.483] (II) modeset(0): Using vrefresh ranges from config file

[   162.483] (II) modeset(0): Printing DDC gathered Modelines:

[   162.483] (II) modeset(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)

[   162.483] (II) modeset(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)

[   162.483] (II) modeset(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)

[   162.483] (II) modeset(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)

[   162.483] (II) modeset(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)

[   162.483] (II) modeset(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)

[   162.483] (II) modeset(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)

[   162.483] (II) modeset(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)

[   162.483] (II) modeset(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)

[   162.483] (II) modeset(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)

[   162.483] (II) modeset(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)

[   162.483] (II) modeset(0): Modeline "1440x900"x0.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz e)

[   162.483] (II) modeset(0): Modeline "1440x900"x0.0  136.75  1440 1536 1688 1936  900 903 909 942 -hsync +vsync (70.6 kHz e)

[   162.483] (II) modeset(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)

[   162.483] (II) modeset(0): Modeline "1280x720"x60.0   74.48  1280 1336 1472 1664  720 721 724 746 -hsync +vsync (44.8 kHz e)

[   162.483] (II) modeset(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)

J'ai trouvé ceci sur les cartes graphiques hybrides intel/radeon : https://wiki.debian.org/AtiHowTo#Hybrid_Graphics mais je ne sais pas quoi en faire.

èfpé · 27-12-2023 22:16:42

chalu a écrit :

switcherooctl list
Device: 0
Name: Intel Corporation HD Graphics 530
Default: yes
Environment: DRI_PRIME=pci-0000_00_02_0

Device: 1
Name: Advanced Micro Devices, Inc. [AMD®/ATI] Jet PRO [Radeon R5 M230 /
R7 M260DX / Radeon 520/610 Mobile]
Default: no
Environment: DRI_PRIME=pci-0000_01_00_0

Comme attendu le GPU Intel est le GPU utilisé par défaut. Et il l'était déjà lors du dernier démarrage.

chalu a écrit :

DRI_PRIME=X vainfo

Désolé chalu je n'ai pas été très explicite. Il faut remplacer X par un identifiant valide ; par exemple :

DRI_PRIME=1 vainfo

La sortie devrait au moins afficher l'erreur libva que tu as obtenue en « exécutant » google-chrome.
edit: le "direct rendering" (DRI) étant désactivé pour le GPU AMD, cette commande n'a aucun sens.

chalu a écrit :

lspci -nnkd ::0380
01:00.0 Display controller [0380]: Advanced Micro Devices, Inc. [AMD/ATI] Jet PRO [Radeon R5 M230 /
R7 M260DX / Radeon 520/610 Mobile] [1002:6665] (rev 83)
Subsystem: Pegatron Jet PRO [Radeon R5 M230 / R7 M260DX / Radeon 520/610 Mobile] [1b0a:90f1]
Kernel driver in use: radeon
Kernel modules: radeon, amdgpu

Retour attendu... le module radeon prend en charge le GPU AMD, de la famille « Southern Islands ».

chalu a écrit :

cat /var/log/Xorg.0.log | grep 'RADEON(G0)'
[ 34.050] (==) RADEON(G0): Depth 24, (--) framebuffer bpp 32
[ 34.050] (II) RADEON(G0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 34.050] (==) RADEON(G0): Default visual is TrueColor
[ 34.051] (==) RADEON(G0): RGB weight 888
[ 34.051] (II) RADEON(G0): Using 8 bits per RGB (8 bit DAC)
[ 34.051] (--) RADEON(G0): Chipset: "HAINAN" (ChipID = 0x6665)
[ 34.051] (II) RADEON(G0): GPU accel disabled or not working, using shadowfb for KMS
[ 34.090] (II) RADEON(G0): KMS Color Tiling: disabled
[ 34.090] (II) RADEON(G0): KMS Color Tiling 2D: disabled
[ 34.090] (II) RADEON(G0): mem size init: gart size :7fbcf000 vram size: s:10000000 visible:fbbe000
[ 34.090] (II) RADEON(G0): EXA: Driver will allow EXA pixmaps in VRAM
[ 34.090] (==) RADEON(G0): DPI set to (96, 96)
[ 34.090] (==) RADEON(G0): Using gamma correction (1.0, 1.0, 1.0)
[ 34.550] (II) RADEON(G0): Front buffer size: 3072K
[ 34.550] (II) RADEON(G0): VRAM usage limit set to 229240K
[ 34.551] (==) RADEON(G0): Backing store enabled
[ 34.551] (WW) RADEON(G0): Direct rendering disabled
[ 34.551] (II) RADEON(G0): Acceleration disabled
[ 34.551] (==) RADEON(G0): DPMS enabled
[ 34.551] (==) RADEON(G0): Silken mouse enabled

Par contre, la prise en charge est globalement mauvaise... beaucoup de fonctionnalités désactivées !

chalu a écrit :

J'ai trouvé ceci sur les cartes graphiques hybrides intel/radeon : https://wiki.debian.org/AtiHowTo#Hybrid_Graphics mais je ne sais pas quoi en faire.

Ni plus ni moins ce que je montre plus haut, tu déclares le GPU à utiliser au moment de l'exécution :

DRI_PRIME=1 google-chrome

Note que déclarer la variable DRI_PRIME=0 ne sert à rien (puisque 0 désigne le GPU « par défaut »).

Dernière modification par èfpé (30-12-2023 13:06:42)

chalu · 28-12-2023 15:35:06

Voilà la commande :

DRI_PRIME=1 vainfo

libva info: VA-API version 1.17.0

libva info: Trying to open /usr/lib/x86_64-linux-gnu/dri/iHD_drv_video.so

libva info: Found init function __vaDriverInit_1_17

libva info: va_openDriver() returns 0

vainfo: VA-API version: 1.17 (libva 2.12.0)

vainfo: Driver version: Intel iHD driver for Intel(R) Gen Graphics - 23.1.1 ()

vainfo: Supported profile and entrypoints

      VAProfileMPEG2Simple            : VAEntrypointVLD

      VAProfileMPEG2Main              : VAEntrypointVLD

      VAProfileH264Main               : VAEntrypointVLD

      VAProfileH264Main               : VAEntrypointEncSliceLP

      VAProfileH264High               : VAEntrypointVLD

      VAProfileH264High               : VAEntrypointEncSliceLP

      VAProfileJPEGBaseline           : VAEntrypointVLD

      VAProfileJPEGBaseline           : VAEntrypointEncPicture

      VAProfileH264ConstrainedBaseline: VAEntrypointVLD

      VAProfileH264ConstrainedBaseline: VAEntrypointEncSliceLP

      VAProfileVP8Version0_3          : VAEntrypointVLD

      VAProfileHEVCMain               : VAEntrypointVLD

Je ne comprends pas pourquoi ça parle d'Intel ?

DRI_PRIME=0 vainfo

libva info: VA-API version 1.17.0

libva info: Trying to open /usr/lib/x86_64-linux-gnu/dri/iHD_drv_video.so

libva info: Found init function __vaDriverInit_1_17

libva info: va_openDriver() returns 0

vainfo: VA-API version: 1.17 (libva 2.12.0)

vainfo: Driver version: Intel iHD driver for Intel(R) Gen Graphics - 23.1.1 ()

vainfo: Supported profile and entrypoints

      VAProfileMPEG2Simple            : VAEntrypointVLD

      VAProfileMPEG2Main              : VAEntrypointVLD

      VAProfileH264Main               : VAEntrypointVLD

      VAProfileH264Main               : VAEntrypointEncSliceLP

      VAProfileH264High               : VAEntrypointVLD

      VAProfileH264High               : VAEntrypointEncSliceLP

      VAProfileJPEGBaseline           : VAEntrypointVLD

      VAProfileJPEGBaseline           : VAEntrypointEncPicture

      VAProfileH264ConstrainedBaseline: VAEntrypointVLD

      VAProfileH264ConstrainedBaseline: VAEntrypointEncSliceLP

      VAProfileVP8Version0_3          : VAEntrypointVLD

      VAProfileHEVCMain               : VAEntrypointVLD

Ce retour pour la carte Intel me semble identique
J'ai pourtant le même retour qu'hier pour ceci :

switcherooctl list

Device: 0

  Name:        Intel® HD Graphics 530

  Default:     yes

  Environment: DRI_PRIME=pci-0000_00_02_0

Device: 1

  Name:        Advanced Micro Devices, Inc. [AMD®/ATI] Jet PRO [Radeon R5 M230 / R7 M260DX / Radeon 520/610 Mobile]

  Default:     no

  Environment: DRI_PRIME=pci-0000_01_00_0

DRI_PRIME=0 google-chrome

 
radeon: Failed to allocate virtual address for buffer:

radeon:    size      : 65536 bytes

radeon:    alignment : 4096 bytes

radeon:    domains   : 4

radeon:    va        : 0x0000000100000000

radeon: Failed to deallocate virtual address for buffer:

radeon:    size      : 65536 bytes

radeon:    va        : 0x100000000

radeon: Failed to allocate virtual address for buffer:

radeon:    size      : 65536 bytes

radeon:    alignment : 4096 bytes

radeon:    domains   : 4

radeon:    va        : 0x0000000100000000

radeon: Failed to deallocate virtual address for buffer:

radeon:    size      : 65536 bytes

radeon:    va        : 0x100000000

radeonsi: can't create border_color_buffer

radeonsi: Failed to create a context.

radeon: Failed to allocate virtual address for buffer:

radeon:    size      : 65536 bytes

radeon:    alignment : 4096 bytes

radeon:    domains   : 4

radeon:    va        : 0x0000000100000000

radeon: Failed to deallocate virtual address for buffer:

radeon:    size      : 65536 bytes

radeon:    va        : 0x100000000

radeon: Failed to allocate virtual address for buffer:

radeon:    size      : 65536 bytes

radeon:    alignment : 4096 bytes

radeon:    domains   : 4

radeon:    va        : 0x0000000100000000

radeon: Failed to deallocate virtual address for buffer:

radeon:    size      : 65536 bytes

radeon:    va        : 0x100000000

radeonsi: can't create border_color_buffer

radeonsi: Failed to create a context.

libva error: /usr/lib/x86_64-linux-gnu/dri/r600_drv_video.so init failed

radeon: Failed to allocate virtual address for buffer:

radeon:    size      : 65536 bytes

radeon:    alignment : 4096 bytes

radeon:    domains   : 4

radeon:    va        : 0x0000000100000000

radeon: Failed to deallocate virtual address for buffer:

radeon:    size      : 65536 bytes

radeon:    va        : 0x100000000

radeon: Failed to allocate virtual address for buffer:

radeon:    size      : 65536 bytes

radeon:    alignment : 4096 bytes

radeon:    domains   : 4

radeon:    va        : 0x0000000100000000

radeon: Failed to deallocate virtual address for buffer:

radeon:    size      : 65536 bytes

radeon:    va        : 0x100000000

radeonsi: can't create border_color_buffer

radeonsi: Failed to create a context.

radeon: Failed to allocate virtual address for buffer:

radeon:    size      : 65536 bytes

radeon:    alignment : 4096 bytes

radeon:    domains   : 4

radeon:    va        : 0x0000000100000000

radeon: Failed to deallocate virtual address for buffer:

radeon:    size      : 65536 bytes

radeon:    va        : 0x100000000

radeon: Failed to allocate virtual address for buffer:

radeon:    size      : 65536 bytes

radeon:    alignment : 4096 bytes

radeon:    domains   : 4

radeon:    va        : 0x0000000100000000

radeon: Failed to deallocate virtual address for buffer:

radeon:    size      : 65536 bytes

radeon:    va        : 0x100000000

radeonsi: can't create border_color_buffer

radeonsi: Failed to create a context.

libva error: /usr/lib/x86_64-linux-gnu/dri/radeonsi_drv_video.so init failed

[3063:3063:1228/152822.448026:ERROR:gl_angle_util_vulkan.cc(189)] Failed to retrieve vkGetInstanceProcAddr

[3063:3063:1228/152822.448144:ERROR:vulkan_instance.cc(93)] Failed to get vkGetInstanceProcAddr pointer from ANGLE.

Fontconfig error: Cannot load default config file: No such file: (null)

J'ai la même chose si je mets 1 à la place de 0

DRI_PRIME=1 google-chrome

 
radeon: Failed to allocate virtual address for buffer:

radeon:    size      : 65536 bytes

radeon:    alignment : 4096 bytes

radeon:    domains   : 4

radeon:    va        : 0x0000000100000000

radeon: Failed to deallocate virtual address for buffer:

radeon:    size      : 65536 bytes

radeon:    va        : 0x100000000

radeon: Failed to allocate virtual address for buffer:

radeon:    size      : 65536 bytes

radeon:    alignment : 4096 bytes

radeon:    domains   : 4

radeon:    va        : 0x0000000100000000

radeon: Failed to deallocate virtual address for buffer:

radeon:    size      : 65536 bytes

radeon:    va        : 0x100000000

radeonsi: can't create border_color_buffer

radeonsi: Failed to create a context.

radeon: Failed to allocate virtual address for buffer:

radeon:    size      : 65536 bytes

radeon:    alignment : 4096 bytes

radeon:    domains   : 4

radeon:    va        : 0x0000000100000000

radeon: Failed to deallocate virtual address for buffer:

radeon:    size      : 65536 bytes

radeon:    va        : 0x100000000

radeon: Failed to allocate virtual address for buffer:

radeon:    size      : 65536 bytes

radeon:    alignment : 4096 bytes

radeon:    domains   : 4

radeon:    va        : 0x0000000100000000

radeon: Failed to deallocate virtual address for buffer:

radeon:    size      : 65536 bytes

radeon:    va        : 0x100000000

radeonsi: can't create border_color_buffer

radeonsi: Failed to create a context.

libva error: /usr/lib/x86_64-linux-gnu/dri/r600_drv_video.so init failed

radeon: Failed to allocate virtual address for buffer:

radeon:    size      : 65536 bytes

radeon:    alignment : 4096 bytes

radeon:    domains   : 4

radeon:    va        : 0x0000000100000000

radeon: Failed to deallocate virtual address for buffer:

radeon:    size      : 65536 bytes

radeon:    va        : 0x100000000

radeon: Failed to allocate virtual address for buffer:

radeon:    size      : 65536 bytes

radeon:    alignment : 4096 bytes

radeon:    domains   : 4

radeon:    va        : 0x0000000100000000

radeon: Failed to deallocate virtual address for buffer:

radeon:    size      : 65536 bytes

radeon:    va        : 0x100000000

radeonsi: can't create border_color_buffer

radeonsi: Failed to create a context.

radeon: Failed to allocate virtual address for buffer:

radeon:    size      : 65536 bytes

radeon:    alignment : 4096 bytes

radeon:    domains   : 4

radeon:    va        : 0x0000000100000000

radeon: Failed to deallocate virtual address for buffer:

radeon:    size      : 65536 bytes

radeon:    va        : 0x100000000

radeon: Failed to allocate virtual address for buffer:

radeon:    size      : 65536 bytes

radeon:    alignment : 4096 bytes

radeon:    domains   : 4

radeon:    va        : 0x0000000100000000

radeon: Failed to deallocate virtual address for buffer:

radeon:    size      : 65536 bytes

radeon:    va        : 0x100000000

radeonsi: can't create border_color_buffer

radeonsi: Failed to create a context.

libva error: /usr/lib/x86_64-linux-gnu/dri/radeonsi_drv_video.so init failed

Fontconfig error: Cannot load default config file: No such file: (null)

èfpé · 28-12-2023 16:10:42

chalu a écrit :

Je ne comprends pas pourquoi ça parle d'Intel ?

Pour le coup, ce n'était pas attendu... tu peux essayer avec une autre syntaxe, d'ailleurs suggérée :

DRI_PRIME=pci-0000_01_00_0 vainfo

edit: le "direct rendering" (DRI) étant désactivé pour le GPU AMD, cette commande n'a aucun sens.
On pourrait s'attendre à ce que cela affiche l'erreur libva, cette fois. Or peux-tu poster le retour de :

glxinfo -B

xrandr --listproviders

Quant à google-chrome, il fait son snob... Il ne daigne parler qu'à AMD (dri/r600, puis dri/radeonsi).

Dernière modification par èfpé (30-12-2023 13:20:42)

chalu · 28-12-2023 16:28:23

DRI_PRIME=pci-0000_01_00_0 vainfo

libva info: VA-API version 1.17.0

libva info: Trying to open /usr/lib/x86_64-linux-gnu/dri/iHD_drv_video.so

libva info: Found init function __vaDriverInit_1_17

libva info: va_openDriver() returns 0

vainfo: VA-API version: 1.17 (libva 2.12.0)

vainfo: Driver version: Intel iHD driver for Intel(R) Gen Graphics - 23.1.1 ()

vainfo: Supported profile and entrypoints

      VAProfileMPEG2Simple            : VAEntrypointVLD

      VAProfileMPEG2Main              : VAEntrypointVLD

      VAProfileH264Main               : VAEntrypointVLD

      VAProfileH264Main               : VAEntrypointEncSliceLP

      VAProfileH264High               : VAEntrypointVLD

      VAProfileH264High               : VAEntrypointEncSliceLP

      VAProfileJPEGBaseline           : VAEntrypointVLD

      VAProfileJPEGBaseline           : VAEntrypointEncPicture

      VAProfileH264ConstrainedBaseline: VAEntrypointVLD

      VAProfileH264ConstrainedBaseline: VAEntrypointEncSliceLP

      VAProfileVP8Version0_3          : VAEntrypointVLD

      VAProfileHEVCMain               : VAEntrypointVLD

C'est toujours Intel.

glxinfo -B

name of display: :0.0

display: :0  screen: 0

direct rendering: Yes

Extended renderer info (GLX_MESA_query_renderer):

    Vendor: Intel (0x8086)

    Device: Mesa Intel(R) HD Graphics 530 (SKL GT2) (0x1912)

    Version: 22.3.6

    Accelerated: yes

    Video memory: 3769MB

    Unified memory: yes

    Preferred profile: core (0x1)

    Max core profile version: 4.6

    Max compat profile version: 4.6

    Max GLES1 profile version: 1.1

    Max GLES[23] profile version: 3.2

OpenGL vendor string: Intel

OpenGL renderer string: Mesa Intel(R) HD Graphics 530 (SKL GT2)

OpenGL core profile version string: 4.6 (Core Profile) Mesa 22.3.6

OpenGL core profile shading language version string: 4.60

OpenGL core profile context flags: (none)

OpenGL core profile profile mask: core profile

OpenGL version string: 4.6 (Compatibility Profile) Mesa 22.3.6

OpenGL shading language version string: 4.60

OpenGL context flags: (none)

OpenGL profile mask: compatibility profile

OpenGL ES profile version string: OpenGL ES 3.2 Mesa 22.3.6

OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.20

xrandr --listproviders

Providers: number : 2

Provider 0: id: 0x43 cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 3 outputs: 2 associated providers: 0 name:modesetting

Provider 1: id: 0x82 cap: 0x0 crtcs: 0 outputs: 0 associated providers: 0 name:HAINAN @ pci:0000:01:00.0

J'ajoute les erreurs de dmseg sur radeon

dmesg |grep -i radeon

[    1.526455] [drm] radeon kernel modesetting enabled.

[    1.542163] radeon 0000:01:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)

[    1.542167] radeon 0000:01:00.0: GTT: 2048M 0x0000000080000000 - 0x00000000FFFFFFFF

[    1.542197] [drm] radeon: 2048M of VRAM memory ready

[    1.542198] [drm] radeon: 2048M of GTT memory ready.

[    1.542237] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/hainan_pfp.bin

[    1.542252] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/hainan_me.bin

[    1.542265] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/hainan_ce.bin

[    1.542278] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/hainan_rlc.bin

[    1.542295] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/hainan_mc.bin

[    1.542316] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/hainan_k_smc.bin

[    1.549006] [drm] radeon: dpm initialized

[    1.557565] radeon 0000:01:00.0: WB enabled

[    1.557567] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00

[    1.557569] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04

[    1.557570] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08

[    1.557572] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c

[    1.557573] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10

[    1.557575] radeon 0000:01:00.0: radeon: MSI limited to 32-bit

[    1.557622] radeon 0000:01:00.0: radeon: using MSI.

[    1.557636] [drm] radeon: irq initialized.

[    1.735247] [drm] Radeon Display Connectors

[    1.736393] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 0

[   13.047512] radeon 0000:01:00.0: WB enabled

[   13.047514] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00

[   13.047517] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04

[   13.047518] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08

[   13.047519] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c

[   13.047520] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10

[   13.220900] debugfs: File 'radeon_ring_gfx' in directory '0' already present!

[   13.220905] debugfs: File 'radeon_ring_cp1' in directory '0' already present!

[   13.220907] debugfs: File 'radeon_ring_cp2' in directory '0' already present!

[   13.220909] debugfs: File 'radeon_ring_dma1' in directory '0' already present!

[   13.220910] debugfs: File 'radeon_ring_dma2' in directory '0' already present!

[   13.571076] [drm:r600_ring_test [radeon]] *ERROR* radeon: ring 0 test failed (scratch(0x850C)=0xCAFEDEAD)

[   13.571121] [drm:si_resume [radeon]] *ERROR* si startup failed on resume

[   28.436281] [drm:atom_op_jump [radeon]] *ERROR* atombios stuck in loop for more than 5secs aborting

[   28.436332] [drm:atom_execute_table_locked [radeon]] *ERROR* atombios stuck executing 69A0 (len 254, WS 0, PS 4) @ 0x69AE

[   28.436372] [drm:atom_execute_table_locked [radeon]] *ERROR* atombios stuck executing 630C (len 78, WS 12, PS 8) @ 0x6345

[   28.844570] radeon 0000:01:00.0: Wait for MC idle timedout !

[   29.046703] radeon 0000:01:00.0: Wait for MC idle timedout !

[   29.055660] radeon 0000:01:00.0: WB enabled

[   29.055663] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00

[   29.055665] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04

[   29.055666] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08

[   29.055668] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c

[   29.055669] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10

[   29.253732] debugfs: File 'radeon_ring_gfx' in directory '0' already present!

[   29.253736] debugfs: File 'radeon_ring_cp1' in directory '0' already present!

[   29.253771] debugfs: File 'radeon_ring_cp2' in directory '0' already present!

[   29.253785] debugfs: File 'radeon_ring_dma1' in directory '0' already present!

[   29.253799] debugfs: File 'radeon_ring_dma2' in directory '0' already present!

[   29.607019] [drm:r600_ring_test [radeon]] *ERROR* radeon: ring 0 test failed (scratch(0x850C)=0xCAFEDEAD)

[   29.607104] [drm:si_resume [radeon]] *ERROR* si startup failed on resume

[   53.488194] [drm:atom_op_jump [radeon]] *ERROR* atombios stuck in loop for more than 5secs aborting

[   53.488227] [drm:atom_execute_table_locked [radeon]] *ERROR* atombios stuck executing 69A0 (len 254, WS 0, PS 4) @ 0x69AE

[   53.488249] [drm:atom_execute_table_locked [radeon]] *ERROR* atombios stuck executing 630C (len 78, WS 12, PS 8) @ 0x6345

[   53.837224] radeon 0000:01:00.0: Wait for MC idle timedout !

[   54.008482] radeon 0000:01:00.0: Wait for MC idle timedout !

[   54.017368] radeon 0000:01:00.0: WB enabled

[   54.017371] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00

[   54.017373] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04

[   54.017374] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08

[   54.017375] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c

[   54.017376] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10

[   54.190793] debugfs: File 'radeon_ring_gfx' in directory '0' already present!

[   54.190812] debugfs: File 'radeon_ring_cp1' in directory '0' already present!

[   54.190814] debugfs: File 'radeon_ring_cp2' in directory '0' already present!

[   54.190829] debugfs: File 'radeon_ring_dma1' in directory '0' already present!

[   54.190830] debugfs: File 'radeon_ring_dma2' in directory '0' already present!

[   54.541266] [drm:r600_ring_test [radeon]] *ERROR* radeon: ring 0 test failed (scratch(0x850C)=0xCAFEDEAD)

[   54.541309] [drm:si_resume [radeon]] *ERROR* si startup failed on resume

[ 1098.413533] [drm:atom_op_jump [radeon]] *ERROR* atombios stuck in loop for more than 5secs aborting

[ 1098.413570] [drm:atom_execute_table_locked [radeon]] *ERROR* atombios stuck executing 69A0 (len 254, WS 0, PS 4) @ 0x69AE

[ 1098.413593] [drm:atom_execute_table_locked [radeon]] *ERROR* atombios stuck executing 630C (len 78, WS 12, PS 8) @ 0x6345

[ 1098.764140] radeon 0000:01:00.0: Wait for MC idle timedout !

[ 1098.936112] radeon 0000:01:00.0: Wait for MC idle timedout !

[ 1098.944945] radeon 0000:01:00.0: WB enabled

[ 1098.944947] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00

[ 1098.944949] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04

[ 1098.944951] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08

[ 1098.944952] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c

[ 1098.944953] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10

[ 1099.118777] debugfs: File 'radeon_ring_gfx' in directory '0' already present!

[ 1099.118785] debugfs: File 'radeon_ring_cp1' in directory '0' already present!

[ 1099.118788] debugfs: File 'radeon_ring_cp2' in directory '0' already present!

[ 1099.118790] debugfs: File 'radeon_ring_dma1' in directory '0' already present!

[ 1099.118792] debugfs: File 'radeon_ring_dma2' in directory '0' already present!

[ 1099.472993] [drm:r600_ring_test [radeon]] *ERROR* radeon: ring 0 test failed (scratch(0x850C)=0xCAFEDEAD)

[ 1099.473039] [drm:si_resume [radeon]] *ERROR* si startup failed on resume

[ 1224.469157] [drm:atom_op_jump [radeon]] *ERROR* atombios stuck in loop for more than 5secs aborting

[ 1224.469193] [drm:atom_execute_table_locked [radeon]] *ERROR* atombios stuck executing 69A0 (len 254, WS 0, PS 4) @ 0x69AE

[ 1224.469216] [drm:atom_execute_table_locked [radeon]] *ERROR* atombios stuck executing 630C (len 78, WS 12, PS 8) @ 0x6345

[ 1224.819844] radeon 0000:01:00.0: Wait for MC idle timedout !

[ 1224.991476] radeon 0000:01:00.0: Wait for MC idle timedout !

[ 1225.000614] radeon 0000:01:00.0: WB enabled

[ 1225.000616] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00

[ 1225.000618] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04

[ 1225.000620] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08

[ 1225.000621] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c

[ 1225.000622] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10

[ 1225.174470] debugfs: File 'radeon_ring_gfx' in directory '0' already present!

[ 1225.174478] debugfs: File 'radeon_ring_cp1' in directory '0' already present!

[ 1225.174480] debugfs: File 'radeon_ring_cp2' in directory '0' already present!

[ 1225.174483] debugfs: File 'radeon_ring_dma1' in directory '0' already present!

[ 1225.174485] debugfs: File 'radeon_ring_dma2' in directory '0' already present!

[ 1225.527197] [drm:r600_ring_test [radeon]] *ERROR* radeon: ring 0 test failed (scratch(0x850C)=0xCAFEDEAD)

[ 1225.527240] [drm:si_resume [radeon]] *ERROR* si startup failed on resume

[ 1258.577043] [drm:atom_op_jump [radeon]] *ERROR* atombios stuck in loop for more than 5secs aborting

[ 1258.577076] [drm:atom_execute_table_locked [radeon]] *ERROR* atombios stuck executing 69A0 (len 254, WS 0, PS 4) @ 0x69AE

[ 1258.577100] [drm:atom_execute_table_locked [radeon]] *ERROR* atombios stuck executing 630C (len 78, WS 12, PS 8) @ 0x6345

[ 1258.929716] radeon 0000:01:00.0: Wait for MC idle timedout !

[ 1259.103752] radeon 0000:01:00.0: Wait for MC idle timedout !

[ 1259.112715] radeon 0000:01:00.0: WB enabled

[ 1259.112717] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00

[ 1259.112720] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04

[ 1259.112721] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08

[ 1259.112722] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c

[ 1259.112723] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10

[ 1259.286636] debugfs: File 'radeon_ring_gfx' in directory '0' already present!

[ 1259.286644] debugfs: File 'radeon_ring_cp1' in directory '0' already present!

[ 1259.286646] debugfs: File 'radeon_ring_cp2' in directory '0' already present!

[ 1259.286649] debugfs: File 'radeon_ring_dma1' in directory '0' already present!

[ 1259.286651] debugfs: File 'radeon_ring_dma2' in directory '0' already present!

[ 1259.639719] [drm:r600_ring_test [radeon]] *ERROR* radeon: ring 0 test failed (scratch(0x850C)=0xCAFEDEAD)

[ 1259.639760] [drm:si_resume [radeon]] *ERROR* si startup failed on resume

[ 1295.328925] [drm:atom_op_jump [radeon]] *ERROR* atombios stuck in loop for more than 5secs aborting

[ 1295.328961] [drm:atom_execute_table_locked [radeon]] *ERROR* atombios stuck executing 69A0 (len 254, WS 0, PS 4) @ 0x69AE

[ 1295.328990] [drm:atom_execute_table_locked [radeon]] *ERROR* atombios stuck executing 630C (len 78, WS 12, PS 8) @ 0x6345

[ 1295.679036] radeon 0000:01:00.0: Wait for MC idle timedout !

[ 1295.850727] radeon 0000:01:00.0: Wait for MC idle timedout !

[ 1295.859471] radeon 0000:01:00.0: WB enabled

[ 1295.859473] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00

[ 1295.859475] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04

[ 1295.859476] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08

[ 1295.859477] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c

[ 1295.859478] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10

[ 1296.033162] debugfs: File 'radeon_ring_gfx' in directory '0' already present!

[ 1296.033170] debugfs: File 'radeon_ring_cp1' in directory '0' already present!

[ 1296.033172] debugfs: File 'radeon_ring_cp2' in directory '0' already present!

[ 1296.033174] debugfs: File 'radeon_ring_dma1' in directory '0' already present!

[ 1296.033176] debugfs: File 'radeon_ring_dma2' in directory '0' already present!

[ 1296.384105] [drm:r600_ring_test [radeon]] *ERROR* radeon: ring 0 test failed (scratch(0x850C)=0xCAFEDEAD)

[ 1296.384148] [drm:si_resume [radeon]] *ERROR* si startup failed on resume

[ 2159.302080] [drm:atom_op_jump [radeon]] *ERROR* atombios stuck in loop for more than 5secs aborting

[ 2159.302112] [drm:atom_execute_table_locked [radeon]] *ERROR* atombios stuck executing 69A0 (len 254, WS 0, PS 4) @ 0x69AE

[ 2159.302134] [drm:atom_execute_table_locked [radeon]] *ERROR* atombios stuck executing 630C (len 78, WS 12, PS 8) @ 0x6345

[ 2159.651527] radeon 0000:01:00.0: Wait for MC idle timedout !

[ 2159.822786] radeon 0000:01:00.0: Wait for MC idle timedout !

[ 2159.831577] radeon 0000:01:00.0: WB enabled

[ 2159.831579] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00

[ 2159.831581] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04

[ 2159.831583] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08

[ 2159.831584] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c

[ 2159.831585] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10

[ 2160.005105] debugfs: File 'radeon_ring_gfx' in directory '0' already present!

[ 2160.005112] debugfs: File 'radeon_ring_cp1' in directory '0' already present!

[ 2160.005114] debugfs: File 'radeon_ring_cp2' in directory '0' already present!

[ 2160.005117] debugfs: File 'radeon_ring_dma1' in directory '0' already present!

[ 2160.005119] debugfs: File 'radeon_ring_dma2' in directory '0' already present!

[ 2160.355808] [drm:r600_ring_test [radeon]] *ERROR* radeon: ring 0 test failed (scratch(0x850C)=0xCAFEDEAD)

[ 2160.355849] [drm:si_resume [radeon]] *ERROR* si startup failed on resume

[ 2207.469921] [drm:atom_op_jump [radeon]] *ERROR* atombios stuck in loop for more than 5secs aborting

[ 2207.469954] [drm:atom_execute_table_locked [radeon]] *ERROR* atombios stuck executing 69A0 (len 254, WS 0, PS 4) @ 0x69AE

[ 2207.469977] [drm:atom_execute_table_locked [radeon]] *ERROR* atombios stuck executing 630C (len 78, WS 12, PS 8) @ 0x6345

[ 2207.818822] radeon 0000:01:00.0: Wait for MC idle timedout !

[ 2207.990116] radeon 0000:01:00.0: Wait for MC idle timedout !

[ 2207.998981] radeon 0000:01:00.0: WB enabled

[ 2207.998983] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00

[ 2207.998985] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04

[ 2207.998986] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08

[ 2207.998988] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c

[ 2207.998989] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10

[ 2208.172458] debugfs: File 'radeon_ring_gfx' in directory '0' already present!

[ 2208.172479] debugfs: File 'radeon_ring_cp1' in directory '0' already present!

[ 2208.172481] debugfs: File 'radeon_ring_cp2' in directory '0' already present!

[ 2208.172483] debugfs: File 'radeon_ring_dma1' in directory '0' already present!

[ 2208.172484] debugfs: File 'radeon_ring_dma2' in directory '0' already present!

[ 2208.523121] [drm:r600_ring_test [radeon]] *ERROR* radeon: ring 0 test failed (scratch(0x850C)=0xCAFEDEAD)

[ 2208.523161] [drm:si_resume [radeon]] *ERROR* si startup failed on resume

J'ai trouvé ceci qui parle d'Intel+AMD mais je ne sais pas si ça correspond vraiment :
https://fr.opensuse.org/SDB:AMDGPU#Conf … ue_hybride
https://forums.linuxmint.com/viewtopic.php?t=394519
Est-ce que passer sur amdgpu à la place de radeon pour le kernel driver serait une "bonne" idée ? j'ai l'impression que c'est expérimental ?

Sinon comment sont construits ces machins à deux cartes ? La carte amd n'apparait pas dans le BIOS. Si j'ouvre le PC, il y aurait moyen de la "débrancher" à votre avis ?
Depuis que j'ai installé debian 12, il semble que ce soit la carte Intel qui soit utilisée et ça marche bien.

èfpé · 28-12-2023 17:34:42

chalu a écrit :

xrandr --listproviders
Providers: number : 2
Provider 0: id: 0x43 cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload
crtcs: 3 outputs: 2 associated providers: 0 name:modesetting
Provider 1: id: 0x82 cap: 0x0 crtcs: 0 outputs: 0 associated providers: 0 name:HAINAN @
pci:0000:01:00.0

Les machins n'étant pas associés cela ne risque pas de fonctionner. Noter qu'il est inutile de tenter :

xrandr --setprovideroffloadsink 1 0

En effet cela doit générer un message d'erreur car le provider n'a pas la capability "Source Offload".
Le "rendu direct" (DRI) est désactivé pour le GPU AMD donc pas de "DRI Offloading" via DRI_PRIME.

chalu a écrit :

Est-ce que passer sur amdgpu à la place de radeon pour le kernel driver serait une "bonne" idée ? j'ai l'impression que c'est expérimental ?

Et selon ce que j'ai lu ça peut être pire. Cette génération de GPU est contemporaine de la transition.

Dernière modification par èfpé (30-12-2023 13:34:42)

chalu · 29-12-2023 15:07:58

Bonjour,

Effectivement une erreur est retournée :

xrandr --setprovideroffloadsink 1 0

X Error of failed request:  BadValue (integer parameter out of range for operation)

  Major opcode of failed request:  140 (RANDR)

  Minor opcode of failed request:  34 (RRSetProviderOffloadSink)

  Value in failed request:  0x82

  Serial number of failed request:  16

  Current serial number in output stream:  17

Mes recherches montrent aussi que les problèmes persistent ou augmentent en passant au driver amdgpu.
J'ai trouvé des fils indiquant de blacklister le module et/ou le driver radeon.
Edit : j'ai trouvé un fil du forum indiquant la suppression "logicielle" de la seconde carte : https://debian-facile.org/viewtopic.php?id=15689
J'ai suivi les manips, la dernière ne fonctionne pas mais un nouvel lspci ne montre plus de carte amd.

lspci

lspci

00.0 Host bridge: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Host Bridge/DRAM Registers (rev 07)

01.0 PCI bridge: Intel Corporation 6th-10th Gen Core Processor PCIe Controller (x16) (rev 07)

02.0 VGA compatible controller: Intel Corporation HD Graphics 530 (rev 06)

08.0 System peripheral: Intel Corporation Xeon E3-1200 v5/v6 / E3-1500 v5 / 6th/7th/8th Gen Core Processor Gaussian Mixture Model

14.0 USB controller: Intel Corporation 100 Series/C230 Series Chipset Family USB 3.0 xHCI Controller (rev 31)

15.0 Signal processing controller: Intel Corporation 100 Series/C230 Series Chipset Family Serial IO I2C Controller #0 (rev 31)

15.1 Signal processing controller: Intel Corporation 100 Series/C230 Series Chipset Family Serial IO I2C Controller #1 (rev 31)

16.0 Communication controller: Intel Corporation 100 Series/C230 Series Chipset Family MEI Controller #1 (rev 31)

17.0 SATA controller: Intel Corporation Q170/Q150/B150/H170/H110/Z170/CM236 Chipset SATA Controller [AHCI Mode] (rev 31)

1c.0 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #5 (rev f1)

1d.0 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #15 (rev f1)

1e.0 Signal processing controller: Intel Corporation 100 Series/C230 Series Chipset Family Serial IO UART #0 (rev 31)

1f.0 ISA bridge: Intel Corporation H170 Chipset LPC/eSPI Controller (rev 31)

1f.2 Memory controller: Intel Corporation 100 Series/C230 Series Chipset Family Power Management Controller (rev 31)

1f.3 Audio device: Intel Corporation 100 Series/C230 Series Chipset Family HD Audio Controller (rev 31)

1f.4 SMBus: Intel Corporation 100 Series/C230 Series Chipset Family SMBus (rev 31)

00.0 Display controller: Advanced Micro Devices, Inc. [AMD/ATI] Jet PRO [Radeon R5 M230 / R7 M260DX / Radeon 520/610 Mobile] (rev 83)

00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 10)

00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8723BE PCIe Wireless Network Adapter

J'ai donc repéré :

01:00.0 Display controller: Advanced Micro Devices, Inc. [AMD/ATI] Jet PRO [Radeon R5 M230 / R7 M260DX / Radeon 520/610 Mobile] (rev 83)

Pour la localiser :

find /sys -name *01:00.0

/sys/kernel/iommu_groups/2/devices/0000:01:00.0

/sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0

/sys/devices/virtual/iommu/dmar1/devices/0000:01:00.0

/sys/bus/pci/devices/0000:01:00.0

/sys/bus/pci/drivers/radeon/0000:01:00.0

J'ai retenu cette ligne :

/sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0

J'ai regardé s'il y avait un "remove" et c'est le cas :

ls /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0

aer_dev_correctable   current_link_speed  enable       i2c-7      local_cpus      power_dpm_force_performance_level  reset_method  rom

aer_dev_fatal     current_link_width  firmware_node  i2c-8      max_link_speed  power_dpm_state          resource    subsystem

aer_dev_nonfatal    d3cold_allowed      hwmon      i2c-9      max_link_width  power_method           resource0   subsystem_device

ari_enabled     device        i2c-10       iommu      modalias      power_profile          resource0_resize  subsystem_vendor

broken_parity_status    dma_mask_bits       i2c-3      iommu_group    msi_bus     power_state            resource0_wc  uevent

class       driver        i2c-4      irq      msi_irqs      remove             resource2   vendor

config        driver_override     i2c-5      link     numa_node     rescan             resource4

consistent_dma_mask_bits  drm         i2c-6      local_cpulist  power     reset            revision

Je l'ai désactivé :

echo 1 > /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/remove

La commande

tail -f /var/log/message

avec ou sans s à messages renvoie que le fichier n'existe pas et effectivement

ls /var/log/

alternatives.log  boot.log    boot.log.2  bootstrap.log  cups    faillog     hp     journal  lightdm  README      unattended-upgrades  Xorg.0.log

apt     boot.log.1  boot.log.3  btmp     dpkg.log  fontconfig.log  ipp-usb  lastlog  private  teamviewer15  wtmp     Xorg.0.log.old

pas de message mais lspci ne parle plus d'AMD

lspci

00.0 Host bridge: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Host Bridge/DRAM Registers (rev 07)

01.0 PCI bridge: Intel Corporation 6th-10th Gen Core Processor PCIe Controller (x16) (rev 07)

02.0 VGA compatible controller: Intel Corporation HD Graphics 530 (rev 06)

08.0 System peripheral: Intel Corporation Xeon E3-1200 v5/v6 / E3-1500 v5 / 6th/7th/8th Gen Core Processor Gaussian Mixture Model

14.0 USB controller: Intel Corporation 100 Series/C230 Series Chipset Family USB 3.0 xHCI Controller (rev 31)

15.0 Signal processing controller: Intel Corporation 100 Series/C230 Series Chipset Family Serial IO I2C Controller #0 (rev 31)

15.1 Signal processing controller: Intel Corporation 100 Series/C230 Series Chipset Family Serial IO I2C Controller #1 (rev 31)

16.0 Communication controller: Intel Corporation 100 Series/C230 Series Chipset Family MEI Controller #1 (rev 31)

17.0 SATA controller: Intel Corporation Q170/Q150/B150/H170/H110/Z170/CM236 Chipset SATA Controller [AHCI Mode] (rev 31)

1c.0 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #5 (rev f1)

1d.0 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #15 (rev f1)

1e.0 Signal processing controller: Intel Corporation 100 Series/C230 Series Chipset Family Serial IO UART #0 (rev 31)

1f.0 ISA bridge: Intel Corporation H170 Chipset LPC/eSPI Controller (rev 31)

1f.2 Memory controller: Intel Corporation 100 Series/C230 Series Chipset Family Power Management Controller (rev 31)

1f.3 Audio device: Intel Corporation 100 Series/C230 Series Chipset Family HD Audio Controller (rev 31)

1f.4 SMBus: Intel Corporation 100 Series/C230 Series Chipset Family SMBus (rev 31)

00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 10)

00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8723BE PCIe Wireless Network Adapter

Et google-chrome ne cherche plus cette carte qu'il ne devait pas utiliser d'ailleurs

google-chrome

Fontconfig error: Cannot load default config file: No such file: (null)

Maintenant, je teste si au redémarrage la carte AMD est toujours désactivée, mais j'ai un doute.

Finalement, très mauvaise idée, ça bugge à l'arrêt du PC. J'ai fait un appui long sur le bouton pour l'arrêter
Au redemarrage, je retrouve la carte AMD. Ce n'est pas la bonne façon de la désactiver de manière logicielle si c'est possible ...

Croutons · 29-12-2023 19:27:11

hello
j'ai ça dans mes notes si ça peut aider
https://forum-debian.fr/viewtopic.php?t=2612

chalu · 31-12-2023 08:55:31

Bonjour,
Merci Crouton, mais je ne cherche plus à faire fonctionner la carte amd. Vu les messages d’erreurs, les échanges avec èfpé et les fils trouvés dans mes recherches, elle ne semble pas bien prise en charge. En plus la carte Intel semble tout à fait convenir pour l’usage des utilisateurs du PC. Je souhaite donc maintenant la désactiver pour faire disparaître les erreurs vues dans dmseg au démarrage,
Et je pense aussi réduire la consommation, éviter qu’elle ne chauffe pour rien ?
Le fil ci-dessus m’a fait penser qu’on pouvait la désactiver en ligne de commande mais ça n’a pas marché.

chalu · 31-12-2023 15:53:13

Bon, j'ai ouvert le PC et ouf

la carte se retire sans problème.

à tous.
Je passe en Résolu.

Debian-facile

#1 25-12-2023 11:47:28

[Résolu]comment gérer deux cartes intel+radeon

#2 25-12-2023 22:00:42

Re : [Résolu]comment gérer deux cartes intel+radeon

#3 27-12-2023 15:58:10

Re : [Résolu]comment gérer deux cartes intel+radeon

#4 27-12-2023 17:07:40

Re : [Résolu]comment gérer deux cartes intel+radeon

#5 27-12-2023 22:16:42

Re : [Résolu]comment gérer deux cartes intel+radeon

#6 28-12-2023 15:35:06

Re : [Résolu]comment gérer deux cartes intel+radeon

#7 28-12-2023 16:10:42

Re : [Résolu]comment gérer deux cartes intel+radeon

#8 28-12-2023 16:28:23

Re : [Résolu]comment gérer deux cartes intel+radeon

#9 28-12-2023 17:34:42

Re : [Résolu]comment gérer deux cartes intel+radeon

#10 29-12-2023 15:07:58

Re : [Résolu]comment gérer deux cartes intel+radeon

#11 29-12-2023 19:27:11

Re : [Résolu]comment gérer deux cartes intel+radeon

#12 31-12-2023 08:55:31

Re : [Résolu]comment gérer deux cartes intel+radeon

#13 31-12-2023 15:53:13

Re : [Résolu]comment gérer deux cartes intel+radeon

Pied de page des forums