Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#1 01-07-2012 11:11:00

frenesik
Invité

Installation debian unstable ( openbox )

Bonjour all,

Voilà j'ai une question peut être bête mais... Je désire m'installer un debian unstable ( avec openbox ), j'ai installé un debian via une netinstall min mais en stable.
Faut il déjà installer les paquets et changer son sources.list ou modife d'abord le sources.list pour après installer les paquets. ( la 2eme solution ok, mais comment modife le sources.list dans le runlevel <ex: avec nano je sais> ? je dois recopier sur un papier les sources.list unstable pour les remplacer par les stables ? ou existe t'il un moyen de changer de branche stable en unstable. )

Ou je modifie le sources.list directement depuis mon autre debian ?

Quel est la meilleur solution ?

J'éspère avoir étais compréhensible.
Cordialement.

Dernière modification par frenesik (01-07-2012 11:15:27)

#2 01-07-2012 11:45:36

mortalius
Membre
Distrib. : Debian GNU/Linux stretch/sid
Noyau : Linux 4.0.0-2-amd64
(G)UI : Xfce 4.12
Inscription : 27-02-2012

Re : Installation debian unstable ( openbox )

Bonjour frenesik,

Pourquoi ne pas tout simplement installer la debian avec une businesscard (ex: debian-testing-amd64-businesscard), ce qui te permet lors de l'install de choisir la branche à utiliser.

Dernière modification par mortalius (01-07-2012 11:45:54)

Hors ligne

#3 01-07-2012 11:51:31

misaine
Membre
Lieu : sables d'olonne
Distrib. : Antergos (Archlinux)
Noyau : 4.3.3
(G)UI : gnome-shell 3.18.2
Inscription : 29-07-2007

Re : Installation debian unstable ( openbox )

mortalius a écrit :

Bonjour frenesik,

Pourquoi ne pas tout simplement installer la debian avec une businesscard (ex: debian-testing-amd64-businesscard), ce qui te permet lors de l'install de choisir la branche à utiliser.


+1
précision : utiliser le mode expert


amd phenom 7650 , 4 Go DDR2 ,GeForce N210

Hors ligne

#4 01-07-2012 15:32:58

martinux_qc
Administrateur
Lieu : Montréal (Québec)
Distrib. : Sid
Noyau : Linux 4.7.0-1-amd64
(G)UI : XFCE 4.12
Inscription : 12-10-2008

Re : Installation debian unstable ( openbox )

Salut

Et en plus, on a un beau tuto dans le wiki qui explique le tout dans le détail. Ce n'est pas bien ça smile.

"L'éducation vise à former des citoyens pas trop tatas et non pas à envoyer le plus de tatas possible à l'université."
Pierre Foglia (Journaliste à la retraite à La Presse)
Note : au Québec, le mot tata a un sens péjoratif qui sert à désigner une personne un peu idiote ou insignifiante. D'où les expressions familières : Espèce de grand, de gros tata! Être, avoir l'air tata.

Hors ligne

#5 01-07-2012 15:38:12

frenesik
Invité

Re : Installation debian unstable ( openbox )

martin_mtl a écrit :

Salut

Et en plus, on a un beau tuto dans le wiki qui explique le tout dans le détail. Ce n'est pas bien ça smile.


Si c'est bien big_smile

Bon j'ai réinstall via un cd netinstall testing, installation ok. 1er boot rien, le grub marche je peux boot mes os linux, mais si je séléctionne debian testing ça charge et bloque sur Waiting for /dev to be fully populated ( idem pour le mode rescor... ). J'ai regardé le xorg.0.log mais je ne vois rien, des idées ?

[    25.751]
X.Org X Server 1.12.1.902 (1.12.2 RC 2)
Release Date: 2012-05-19
[    25.751] X Protocol Version 11, Revision 0
[    25.751] Build Operating System: Linux 3.2.0-2-amd64 x86_64 Debian
[    25.751] Current Operating System: Linux debian-gnome 3.2.0-2-amd64 #1 SMP Mon Jun 11 17:24:18 UTC 2012 x86_64
[    25.751] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-2-amd64 root=UUID=55430943-4687-4ae4-8fb9-1dfac52ba88e ro quiet
[    25.751] Build Date: 20 May 2012  08:57:17AM
[    25.751] xorg-server 2:1.12.1.902-1 (Cyril Brulebois <kibi@debian.org>)
[    25.751] Current version of pixman: 0.24.4
[    25.751]  Before reporting problems, check http://wiki.x.org
  to make sure that you have the latest version.
[    25.751] Markers: (--) probed, (**) from config file, (==) default setting,
  (++) from command line, (!!) notice, (II) informational,
  (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    25.751] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jul  1 15:23:50 2012
[    25.751] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    25.751] (==) No Layout section.  Using the first Screen section.
[    25.751] (==) No screen section available. Using defaults.
[    25.751] (**) |-->Screen "Default Screen Section" (0)
[    25.751] (**) |   |-->Monitor "<default monitor>"
[    25.751] (==) No monitor specified for screen "Default Screen Section".
  Using a default monitor configuration.
[    25.751] (==) Automatically adding devices
[    25.751] (==) Automatically enabling devices
[    25.751] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    25.751]  Entry deleted from font path.
[    25.751] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[    25.751]  Entry deleted from font path.
[    25.751] (==) FontPath set to:
  /usr/share/fonts/X11/misc,
  /usr/share/fonts/X11/100dpi/:unscaled,
  /usr/share/fonts/X11/75dpi/:unscaled,
  /usr/share/fonts/X11/Type1,
  /usr/share/fonts/X11/100dpi,
  /usr/share/fonts/X11/75dpi,
  built-ins
[    25.751] (==) ModulePath set to "/usr/lib/xorg/modules"
[    25.751] (II) The server relies on udev to provide the list of input devices.
  If no devices become available, reconfigure udev or disable AutoAddDevices.
[    25.751] (II) Loader magic: 0x7f42b6c3bae0
[    25.751] (II) Module ABI versions:
[    25.751]  X.Org ANSI C Emulation: 0.4
[    25.751]  X.Org Video Driver: 12.0
[    25.751]  X.Org XInput driver : 16.0
[    25.751]  X.Org Server Extension : 6.0
[    25.752] (--) PCI:*(0:3:0:0) 10de:1244:10de:089c rev 161, Mem @ 0xfc000000/33554432, 0xd8000000/134217728, 0xd4000000/67108864, I/O @ 0x0000ec00/128, BIOS @ 0x????????/524288
[    25.752] (II) Open ACPI successful (/var/run/acpid.socket)
[    25.752] (II) LoadModule: "extmod"
[    25.752] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    25.752] (II) Module extmod: vendor="X.Org Foundation"
[    25.752]  compiled for 1.12.1.902, module version = 1.0.0
[    25.752]  Module class: X.Org Server Extension
[    25.752]  ABI class: X.Org Server Extension, version 6.0
[    25.752] (II) Loading extension SELinux
[    25.752] (II) Loading extension MIT-SCREEN-SAVER
[    25.753] (II) Loading extension XFree86-VidModeExtension
[    25.753] (II) Loading extension XFree86-DGA
[    25.753] (II) Loading extension DPMS
[    25.753] (II) Loading extension XVideo
[    25.753] (II) Loading extension XVideo-MotionCompensation
[    25.753] (II) Loading extension X-Resource
[    25.753] (II) LoadModule: "dbe"
[    25.753] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    25.753] (II) Module dbe: vendor="X.Org Foundation"
[    25.753]  compiled for 1.12.1.902, module version = 1.0.0
[    25.753]  Module class: X.Org Server Extension
[    25.753]  ABI class: X.Org Server Extension, version 6.0
[    25.753] (II) Loading extension DOUBLE-BUFFER
[    25.753] (II) LoadModule: "glx"
[    25.753] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    25.753] (II) Module glx: vendor="X.Org Foundation"
[    25.753]  compiled for 1.12.1.902, module version = 1.0.0
[    25.753]  ABI class: X.Org Server Extension, version 6.0
[    25.753] (==) AIGLX enabled
[    25.753] (II) Loading extension GLX
[    25.753] (II) LoadModule: "record"
[    25.753] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    25.753] (II) Module record: vendor="X.Org Foundation"
[    25.753]  compiled for 1.12.1.902, module version = 1.13.0
[    25.753]  Module class: X.Org Server Extension
[    25.753]  ABI class: X.Org Server Extension, version 6.0
[    25.753] (II) Loading extension RECORD
[    25.753] (II) LoadModule: "dri"
[    25.753] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    25.753] (II) Module dri: vendor="X.Org Foundation"
[    25.753]  compiled for 1.12.1.902, module version = 1.0.0
[    25.753]  ABI class: X.Org Server Extension, version 6.0
[    25.753] (II) Loading extension XFree86-DRI
[    25.753] (II) LoadModule: "dri2"
[    25.753] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    25.753] (II) Module dri2: vendor="X.Org Foundation"
[    25.753]  compiled for 1.12.1.902, module version = 1.2.0
[    25.753]  ABI class: X.Org Server Extension, version 6.0
[    25.753] (II) Loading extension DRI2
[    25.753] (==) Matched nouveau as autoconfigured driver 0
[    25.753] (==) Matched nv as autoconfigured driver 1
[    25.753] (==) Matched vesa as autoconfigured driver 2
[    25.753] (==) Matched fbdev as autoconfigured driver 3
[    25.753] (==) Assigned the driver to the xf86ConfigLayout
[    25.753] (II) LoadModule: "nouveau"
[    25.754] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[    25.754] (II) Module nouveau: vendor="X.Org Foundation"
[    25.754]  compiled for 1.12.1, module version = 0.0.16
[    25.754]  Module class: X.Org Video Driver
[    25.754]  ABI class: X.Org Video Driver, version 12.0
[    25.754] (II) LoadModule: "nv"
[    25.754] (WW) Warning, couldn't open module nv
[    25.754] (II) UnloadModule: "nv"
[    25.754] (II) Unloading nv
[    25.754] (EE) Failed to load module "nv" (module does not exist, 0)
[    25.754] (II) LoadModule: "vesa"
[    25.754] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    25.754] (II) Module vesa: vendor="X.Org Foundation"
[    25.754]  compiled for 1.12.1, module version = 2.3.1
[    25.754]  Module class: X.Org Video Driver
[    25.754]  ABI class: X.Org Video Driver, version 12.0
[    25.754] (II) LoadModule: "fbdev"
[    25.754] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    25.754] (II) Module fbdev: vendor="X.Org Foundation"
[    25.754]  compiled for 1.12.1, module version = 0.4.2
[    25.754]  ABI class: X.Org Video Driver, version 12.0
[    25.754] (II) NOUVEAU driver Date:   Wed Mar 21 14:56:55 2012 +1000
[    25.754] (II) NOUVEAU driver for NVIDIA chipset families :
[    25.754]  RIVA TNT        (NV04)
[    25.754]  RIVA TNT2       (NV05)
[    25.754]  GeForce 256     (NV10)
[    25.755]  GeForce 2       (NV11, NV15)
[    25.755]  GeForce 4MX     (NV17, NV18)
[    25.755]  GeForce 3       (NV20)
[    25.755]  GeForce 4Ti     (NV25, NV28)
[    25.755]  GeForce FX      (NV3x)
[    25.755]  GeForce 6       (NV4x)
[    25.755]  GeForce 7       (G7x)
[    25.755]  GeForce 8       (G8x)
[    25.755]  GeForce GTX 200 (NVA0)
[    25.755]  GeForce GTX 400 (NVC0)
[    25.755] (II) VESA: driver for VESA chipsets: vesa
[    25.755] (II) FBDEV: driver for framebuffer: fbdev
[    25.870] (--) using VT number 12

#6 01-07-2012 18:43:34

bel@mi
Membre
Distrib. : Stable (bpo)
Inscription : 14-04-2012

Re : Installation debian unstable ( openbox )

Normalement, pour ton projet, en suivant les conseils tu aurais du installer une sid en businesscard (mode expert) sans environnement de bureau, ensuite il aurait suffit d'installer les paquets openbox obconf obmenu. Là je ne sais pas ou t'est partis, mais on te coseille bussinesscard, tu choisi netinstall, tu parles de sid, tu installes testing (c'est pas la meilleur moment AMHA)???

Hors ligne

#7 01-07-2012 19:42:44

frenesik
Invité

Re : Installation debian unstable ( openbox )

Non je me suis orienté gnome pour test, donc j'ai installé via la netinstall testing ! Et après boot pas. Voilà

#8 01-07-2012 20:02:28

misaine
Membre
Lieu : sables d'olonne
Distrib. : Antergos (Archlinux)
Noyau : 4.3.3
(G)UI : gnome-shell 3.18.2
Inscription : 29-07-2007

Re : Installation debian unstable ( openbox )

tu poses une question
on y répond
tu n'en tiens pas compte et pars sur tout autre chose
je sors

amd phenom 7650 , 4 Go DDR2 ,GeForce N210

Hors ligne

#9 02-07-2012 08:33:10

paskal
autobahn
Lieu : ailleurs
Inscription : 14-06-2011
Site Web

Re : Installation debian unstable ( openbox )

frenesik a écrit :

ça charge et bloque sur Waiting for /dev to be fully populated


Peut-être un firmware manquant.

frenesik a écrit :

J'ai regardé le xorg.0.log mais je ne vois rien, des idées ?


Ben ouvre les yeux ! tongue

[    25.754] (EE) Failed to load module "nv" (module does not exist, 0)


I'd love to change the world
But I don't know what to do
So I'll leave it up to you...

logo-sur-fond.png

Hors ligne

#10 20-07-2012 13:17:54

frenesik
Invité

Re : Installation debian unstable ( openbox )

paskal a écrit :

frenesik a écrit :

ça charge et bloque sur Waiting for /dev to be fully populated


Peut-être un firmware manquant.

frenesik a écrit :

J'ai regardé le xorg.0.log mais je ne vois rien, des idées ?


Ben ouvre les yeux ! tongue

[    25.754] (EE) Failed to load module "nv" (module does not exist, 0)



Merci.

Je suis reparti d'une install debian testing (wheezy xfce 4.8) pour X raisons, j'ai installé via un dvd install, l'installation ce déroule sans problèmes. Je fini l'install reboot, grub ce lance je sélectionne mon installation toute fraîche, ça load jusqu'à <Waiting for /dev to be fully populated...> et ça bloque là, rien ne ce charge. Je reboot donc, sur un autre os de mon grub je regarde mon Xorg.0.log et encore ce problème de driver 'nv'. Sachant que mon mode rescue aussi ne ce lance pas.

Je voulais savoir comment corriger le problème, sachant que je ne connais ce problème que avec le noyau 3.2. Le 2.6, lui niquel pas de problèmes.

#11 20-07-2012 14:15:00

Thuban
Modérateur
Distrib. : OpenBSD
Noyau : current
(G)UI : xfce ou dwm
Inscription : 09-01-2009
Site Web

Re : Installation debian unstable ( openbox )

Je crois qu'il faudrait préciser dans le xorg.conf d'utiliser le pilote nouveau plutôt. Normalement, il est automatiquement chargé si xserver-xorg-video-nouveau est installé.

Si je puis me permettre, as-tu ajouté ceci dans /etc/apt/apt.conf pour garder une debian minimale :


APT::Install-Suggests "false";
APT::Install-Recommends "false";
Aptitude::Recommends-Important "false";
Aptitude::Suggests-Important "false";

 


YA3HGA-H

Hors ligne

#12 20-07-2012 15:10:46

paskal
autobahn
Lieu : ailleurs
Inscription : 14-06-2011
Site Web

Re : Installation debian unstable ( openbox )

Avec le 2.6, que donne $ grep -B2 'Module class: X.Org Video Driver' /var/log/Xorg.0.log

I'd love to change the world
But I don't know what to do
So I'll leave it up to you...

logo-sur-fond.png

Hors ligne

#13 20-07-2012 17:34:22

frenesik
Invité

Re : Installation debian unstable ( openbox )

Thuban a écrit :

Je crois qu'il faudrait préciser dans le xorg.conf d'utiliser le pilote nouveau plutôt. Normalement, il est automatiquement chargé si xserver-xorg-video-nouveau est installé.

Si je puis me permettre, as-tu ajouté ceci dans /etc/apt/apt.conf pour garder une debian minimale :


APT::Install-Suggests "false";
APT::Install-Recommends "false";
Aptitude::Recommends-Important "false";
Aptitude::Suggests-Important "false";

 



Je ne peux la démarrer. Démarrage impossible aussi en mode rescue.

Avec le 2.6, que donne $ grep -B2 'Module class: X.Org Video Driver' /var/log/Xorg.0.log



cela me renvoi ceci:

grep -B2 'Module class: X.Org Video Driver' /var/log/Xorg.0.log
(II) Module nvidia: vendor="NVIDIA Corporation"
  compiled for 4.0.2, module version = 1.0.0
  Module class: X.Org Video Driver
 

#14 21-07-2012 08:29:12

paskal
autobahn
Lieu : ailleurs
Inscription : 14-06-2011
Site Web

Re : Installation debian unstable ( openbox )

C'était donc le pilote proprio nvidia que tu utilisais avec le noyau 2.6.
Alors que là, xorg charge le pilote libre "nouveau".
Une parenthèse : je trouve ton fichier xorg.0.log "petit", tu l'as donné en entier ?

Le "nv" (l'ancien pilote libre) ne devrait plus être présent dans wheezy, mais comme il n'est pas chargé, je ne pense pas que ce soit ça qui bloque.
Pour être sûr, tu peux le mettre en blacklist dans /etc/modprobe.d/blacklist.conf

blacklist nv



Si ça ne vient pas de là, à mon avis, il faudra tenter de réinstaller à partir d'une image comportant les firmwares non libres, à piocher dans http://cdimage.debian.org/cdimage/unoff … di_alpha1/

Bon courage.


I'd love to change the world
But I don't know what to do
So I'll leave it up to you...

logo-sur-fond.png

Hors ligne

#15 21-07-2012 10:51:13

frenesik
Invité

Re : Installation debian unstable ( openbox )

paskal a écrit :

C'était donc le pilote proprio nvidia que tu utilisais avec le noyau 2.6.
Alors que là, xorg charge le pilote libre "nouveau".
Une parenthèse : je trouve ton fichier xorg.0.log "petit", tu l'as donné en entier ?

Le "nv" (l'ancien pilote libre) ne devrait plus être présent dans wheezy, mais comme il n'est pas chargé, je ne pense pas que ce soit ça qui bloque.
Pour être sûr, tu peux le mettre en blacklist dans /etc/modprobe.d/blacklist.conf

blacklist nv



Si ça ne vient pas de là, à mon avis, il faudra tenter de réinstaller à partir d'une image comportant les firmwares non libres, à piocher dans http://cdimage.debian.org/cdimage/unoff … di_alpha1/

Bon courage.



Salut,

Sur 2 autres linux ( openbox et gnome stable ), oui j'utilise le driver proprio de Nvidia. L'installation du noyau 3.2 ( debian wheezy xfce ) est une nouvelle installation, sur une autres partition, j'ai ainsi mes 2 linux en 2.6 et le nouveau en 3.2. Mes 2 linux 2.6 boot niquel et marche. Mais la 3.2 impossible à boot ( voir Xorg.0.log )

[    21.637]
X.Org X Server 1.12.1.902 (1.12.2 RC 2)
Release Date: 2012-05-19
[    21.637] X Protocol Version 11, Revision 0
[    21.637] Build Operating System: Linux 3.2.0-2-amd64 x86_64 Debian
[    21.637] Current Operating System: Linux debian-xfce 3.2.0-3-amd64 #1 SMP Thu Jun 28 09:07:26 UTC 2012 x86_64
[    21.637] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-3-amd64 root=UUID=11de07e7-70fe-4abc-9743-3cda8bf7702f ro quiet
[    21.637] Build Date: 20 May 2012  08:57:17AM
[    21.637] xorg-server 2:1.12.1.902-1 (Cyril Brulebois <kibi@debian.org>)
[    21.637] Current version of pixman: 0.26.0
[    21.637]  Before reporting problems, check http://wiki.x.org
  to make sure that you have the latest version.
[    21.637] Markers: (--) probed, (**) from config file, (==) default setting,
  (++) from command line, (!!) notice, (II) informational,
  (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    21.638] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jul 21 10:40:56 2012
[    21.717] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    21.718] (==) No Layout section.  Using the first Screen section.
[    21.718] (==) No screen section available. Using defaults.
[    21.718] (**) |-->Screen "Default Screen Section" (0)
[    21.718] (**) |   |-->Monitor "<default monitor>"
[    21.719] (==) No monitor specified for screen "Default Screen Section".
  Using a default monitor configuration.
[    21.719] (==) Automatically adding devices
[    21.719] (==) Automatically enabling devices
[    21.760] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    21.760]  Entry deleted from font path.
[    21.800] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[    21.800]  Entry deleted from font path.
[    21.800] (==) FontPath set to:
  /usr/share/fonts/X11/misc,
  /usr/share/fonts/X11/100dpi/:unscaled,
  /usr/share/fonts/X11/75dpi/:unscaled,
  /usr/share/fonts/X11/Type1,
  /usr/share/fonts/X11/100dpi,
  /usr/share/fonts/X11/75dpi,
  built-ins
[    21.800] (==) ModulePath set to "/usr/lib/xorg/modules"
[    21.800] (II) The server relies on udev to provide the list of input devices.
  If no devices become available, reconfigure udev or disable AutoAddDevices.
[    21.800] (II) Loader magic: 0x7f5945493ae0
[    21.800] (II) Module ABI versions:
[    21.800]  X.Org ANSI C Emulation: 0.4
[    21.800]  X.Org Video Driver: 12.0
[    21.800]  X.Org XInput driver : 16.0
[    21.800]  X.Org Server Extension : 6.0
[    21.801] (--) PCI:*(0:3:0:0) 10de:1244:10de:089c rev 161, Mem @ 0xfc000000/33554432, 0xd8000000/134217728, 0xd4000000/67108864, I/O @ 0x0000ec00/128, BIOS @ 0x????????/524288
[    21.801] (II) Open ACPI successful (/var/run/acpid.socket)
[    21.801] (II) LoadModule: "extmod"
[    21.844] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    21.853] (II) Module extmod: vendor="X.Org Foundation"
[    21.853]  compiled for 1.12.1.902, module version = 1.0.0
[    21.853]  Module class: X.Org Server Extension
[    21.853]  ABI class: X.Org Server Extension, version 6.0
[    21.853] (II) Loading extension SELinux
[    21.853] (II) Loading extension MIT-SCREEN-SAVER
[    21.853] (II) Loading extension XFree86-VidModeExtension
[    21.853] (II) Loading extension XFree86-DGA
[    21.853] (II) Loading extension DPMS
[    21.853] (II) Loading extension XVideo
[    21.853] (II) Loading extension XVideo-MotionCompensation
[    21.853] (II) Loading extension X-Resource
[    21.853] (II) LoadModule: "dbe"
[    21.853] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    21.854] (II) Module dbe: vendor="X.Org Foundation"
[    21.854]  compiled for 1.12.1.902, module version = 1.0.0
[    21.854]  Module class: X.Org Server Extension
[    21.854]  ABI class: X.Org Server Extension, version 6.0
[    21.854] (II) Loading extension DOUBLE-BUFFER
[    21.854] (II) LoadModule: "glx"
[    21.854] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    21.870] (II) Module glx: vendor="X.Org Foundation"
[    21.870]  compiled for 1.12.1.902, module version = 1.0.0
[    21.870]  ABI class: X.Org Server Extension, version 6.0
[    21.870] (==) AIGLX enabled
[    21.870] (II) Loading extension GLX
[    21.870] (II) LoadModule: "record"
[    21.870] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    21.871] (II) Module record: vendor="X.Org Foundation"
[    21.871]  compiled for 1.12.1.902, module version = 1.13.0
[    21.871]  Module class: X.Org Server Extension
[    21.871]  ABI class: X.Org Server Extension, version 6.0
[    21.871] (II) Loading extension RECORD
[    21.871] (II) LoadModule: "dri"
[    21.871] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    21.886] (II) Module dri: vendor="X.Org Foundation"
[    21.886]  compiled for 1.12.1.902, module version = 1.0.0
[    21.886]  ABI class: X.Org Server Extension, version 6.0
[    21.886] (II) Loading extension XFree86-DRI
[    21.886] (II) LoadModule: "dri2"
[    21.886] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    21.887] (II) Module dri2: vendor="X.Org Foundation"
[    21.887]  compiled for 1.12.1.902, module version = 1.2.0
[    21.887]  ABI class: X.Org Server Extension, version 6.0
[    21.887] (II) Loading extension DRI2
[    21.887] (==) Matched nouveau as autoconfigured driver 0
[    21.887] (==) Matched nv as autoconfigured driver 1
[    21.887] (==) Matched vesa as autoconfigured driver 2
[    21.887] (==) Matched fbdev as autoconfigured driver 3
[    21.887] (==) Assigned the driver to the xf86ConfigLayout
[    21.887] (II) LoadModule: "nouveau"
[    21.905] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[    22.078] (II) Module nouveau: vendor="X.Org Foundation"
[    22.078]  compiled for 1.12.1, module version = 0.0.16
[    22.078]  Module class: X.Org Video Driver
[    22.078]  ABI class: X.Org Video Driver, version 12.0
[    22.079] (II) LoadModule: "nv"
[    22.079] (WW) Warning, couldn't open module nv
[    22.079] (II) UnloadModule: "nv"
[    22.079] (II) Unloading nv
[    22.079] (EE) Failed to load module "nv" (module does not exist, 0)
[    22.079] (II) LoadModule: "vesa"
[    22.079] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    22.082] (II) Module vesa: vendor="X.Org Foundation"
[    22.082]  compiled for 1.12.1, module version = 2.3.1
[    22.082]  Module class: X.Org Video Driver
[    22.082]  ABI class: X.Org Video Driver, version 12.0
[    22.082] (II) LoadModule: "fbdev"
[    22.082] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    22.088] (II) Module fbdev: vendor="X.Org Foundation"
[    22.088]  compiled for 1.12.1, module version = 0.4.2
[    22.088]  ABI class: X.Org Video Driver, version 12.0
[    22.088] (II) NOUVEAU driver Date:   Wed Mar 21 14:56:55 2012 +1000
[    22.088] (II) NOUVEAU driver for NVIDIA chipset families :
[    22.088]  RIVA TNT        (NV04)
[    22.088]  RIVA TNT2       (NV05)
[    22.088]  GeForce 256     (NV10)
[    22.088]  GeForce 2       (NV11, NV15)
[    22.088]  GeForce 4MX     (NV17, NV18)
[    22.088]  GeForce 3       (NV20)
[    22.088]  GeForce 4Ti     (NV25, NV28)
[    22.088]  GeForce FX      (NV3x)
[    22.088]  GeForce 6       (NV4x)
[    22.088]  GeForce 7       (G7x)
[    22.088]  GeForce 8       (G8x)
[    22.088]  GeForce GTX 200 (NVA0)
[    22.088]  GeForce GTX 400 (NVC0)
[    22.088] (II) VESA: driver for VESA chipsets: vesa
[    22.088] (II) FBDEV: driver for framebuffer: fbdev
[    22.088] (++) using VT number 7

[    22.089] drmOpenDevice: node name is /dev/dri/card0
[    22.089] drmOpenDevice: open result is 8, (OK)
[    22.089] drmOpenByBusid: Searching for BusID pci:0000:03:00.0
[    22.089] drmOpenDevice: node name is /dev/dri/card0
[    22.089] drmOpenDevice: open result is 8, (OK)
[    22.089] drmOpenByBusid: drmOpenMinor returns 8
[    22.089] drmOpenByBusid: drmGetBusid reports pci:0000:03:00.0
[    22.089] (II) [drm] nouveau interface version: 0.0.16
[    22.089] (WW) Falling back to old probe method for vesa
[    22.089] (WW) Falling back to old probe method for fbdev
[    22.089] (II) Loading sub module "fbdevhw"
[    22.089] (II) LoadModule: "fbdevhw"
[    22.089] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    22.104] (II) Module fbdevhw: vendor="X.Org Foundation"
[    22.104]  compiled for 1.12.1.902, module version = 0.0.2
[    22.104]  ABI class: X.Org Video Driver, version 12.0
[    22.104] (II) Loading sub module "dri"
[    22.104] (II) LoadModule: "dri"
[    22.104] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    22.104] (II) Module dri: vendor="X.Org Foundation"
[    22.104]  compiled for 1.12.1.902, module version = 1.0.0
[    22.104]  ABI class: X.Org Server Extension, version 6.0
[    22.104] (II) NOUVEAU(0): Loaded DRI module
[    22.104] drmOpenDevice: node name is /dev/dri/card0
[    22.104] drmOpenDevice: open result is 9, (OK)
[    22.104] drmOpenDevice: node name is /dev/dri/card0
[    22.104] drmOpenDevice: open result is 9, (OK)
[    22.104] drmOpenByBusid: Searching for BusID pci:0000:03:00.0
[    22.104] drmOpenDevice: node name is /dev/dri/card0
[    22.104] drmOpenDevice: open result is 9, (OK)
[    22.104] drmOpenByBusid: drmOpenMinor returns 9
[    22.104] drmOpenByBusid: drmGetBusid reports pci:0000:03:00.0
[    22.104] (II) [drm] DRM interface version 1.4
[    22.104] (II) [drm] DRM open master succeeded.
[    22.104] (--) NOUVEAU(0): Chipset: "NVIDIA NVcf"
[    22.104] (II) NOUVEAU(0): Creating default Display subsection in Screen section
  "Default Screen Section" for depth/fbbpp 24/32
[    22.104] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[    22.104] (==) NOUVEAU(0): RGB weight 888
[    22.104] (==) NOUVEAU(0): Default visual is TrueColor
[    22.104] (==) NOUVEAU(0): Using HW cursor
[    22.104] (==) NOUVEAU(0): GLX sync to VBlank disabled.
[    22.104] (==) NOUVEAU(0): Page flipping enabled
[    22.104] (==) NOUVEAU(0): Swap limit set to 2 [Max allowed 2]
[    22.212] (II) NOUVEAU(0): Output DVI-I-1 has no monitor section
[    22.317] (II) NOUVEAU(0): Output DVI-I-2 has no monitor section
[    22.324] (II) NOUVEAU(0): Output HDMI-1 has no monitor section
[    22.429] (II) NOUVEAU(0): EDID for output DVI-I-1
[    22.429] (II) NOUVEAU(0): Manufacturer: SAM  Model: 226  Serial#: 1212231993
[    22.429] (II) NOUVEAU(0): Year: 2006  Week: 25
[    22.429] (II) NOUVEAU(0): EDID Version: 1.3
[    22.429] (II) NOUVEAU(0): Digital Display Input
[    22.429] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 41  vert.: 26
[    22.429] (II) NOUVEAU(0): Gamma: 2.35
[    22.429] (II) NOUVEAU(0): DPMS capabilities: Off
[    22.429] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[    22.429] (II) NOUVEAU(0): First detailed timing is preferred mode
[    22.429] (II) NOUVEAU(0): redX: 0.636 redY: 0.349   greenX: 0.290 greenY: 0.589
[    22.429] (II) NOUVEAU(0): blueX: 0.143 blueY: 0.080   whiteX: 0.313 whiteY: 0.329
[    22.429] (II) NOUVEAU(0): Supported established timings:
[    22.429] (II) NOUVEAU(0): 720x400@70Hz
[    22.429] (II) NOUVEAU(0): 640x480@60Hz
[    22.429] (II) NOUVEAU(0): 640x480@67Hz
[    22.429] (II) NOUVEAU(0): 640x480@72Hz
[    22.429] (II) NOUVEAU(0): 640x480@75Hz
[    22.429] (II) NOUVEAU(0): 800x600@56Hz
[    22.429] (II) NOUVEAU(0): 800x600@60Hz
[    22.429] (II) NOUVEAU(0): 800x600@72Hz
[    22.429] (II) NOUVEAU(0): 800x600@75Hz
[    22.429] (II) NOUVEAU(0): 832x624@75Hz
[    22.429] (II) NOUVEAU(0): 1024x768@60Hz
[    22.429] (II) NOUVEAU(0): 1024x768@70Hz
[    22.429] (II) NOUVEAU(0): 1024x768@75Hz
[    22.429] (II) NOUVEAU(0): 1280x1024@75Hz
[    22.429] (II) NOUVEAU(0): 1152x864@75Hz
[    22.429] (II) NOUVEAU(0): Manufacturer's mask: 0
[    22.429] (II) NOUVEAU(0): Supported standard timings:
[    22.429] (II) NOUVEAU(0): #0: hsize: 1440  vsize 900  refresh: 60  vid: 149
[    22.429] (II) NOUVEAU(0): #1: hsize: 1440  vsize 900  refresh: 75  vid: 3989
[    22.429] (II) NOUVEAU(0): #2: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    22.429] (II) NOUVEAU(0): #3: hsize: 1280  vsize 960  refresh: 60  vid: 16513
[    22.429] (II) NOUVEAU(0): #4: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[    22.429] (II) NOUVEAU(0): Supported detailed timing:
[    22.429] (II) NOUVEAU(0): clock: 106.5 MHz   Image Size:  410 x 257 mm
[    22.429] (II) NOUVEAU(0): h_active: 1440  h_sync: 1520  h_sync_end 1672 h_blank_end 1904 h_border: 0
[    22.429] (II) NOUVEAU(0): v_active: 900  v_sync: 903  v_sync_end 909 v_blanking: 934 v_border: 0
[    22.429] (II) NOUVEAU(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 145 MHz
[    22.429] (II) NOUVEAU(0): Monitor name: SyncMaster
[    22.429] (II) NOUVEAU(0): Serial No: HSHL606355
[    22.429] (II) NOUVEAU(0): EDID (in hex):
[    22.429] (II) NOUVEAU(0):   00ffffffffffff004c2d260239314148
[    22.429] (II) NOUVEAU(0):   1910010380291a872ad7a5a2594a9624
[    22.429] (II) NOUVEAU(0):   145054bfef809500950f81808140714f
[    22.429] (II) NOUVEAU(0):   0101010101019a29a0d0518422305098
[    22.429] (II) NOUVEAU(0):   36009a011100001c000000fd00384b1e
[    22.429] (II) NOUVEAU(0):   510e000a202020202020000000fc0053
[    22.429] (II) NOUVEAU(0):   796e634d61737465720a2020000000ff
[    22.429] (II) NOUVEAU(0):   004853484c3630363335350a202000a8
[    22.429] (II) NOUVEAU(0): EDID vendor "SAM", prod id 550
[    22.429] (II) NOUVEAU(0): Using EDID range info for horizontal sync
[    22.429] (II) NOUVEAU(0): Using EDID range info for vertical refresh
[    22.429] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    22.429] (II) NOUVEAU(0): Modeline "1440x900"x0.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz eP)
[    22.429] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    22.429] (II) NOUVEAU(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    22.429] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    22.429] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[    22.429] (II) NOUVEAU(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    22.429] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    22.429] (II) NOUVEAU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    22.429] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    22.429] (II) NOUVEAU(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    22.429] (II) NOUVEAU(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    22.429] (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    22.429] (II) NOUVEAU(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    22.429] (II) NOUVEAU(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    22.429] (II) NOUVEAU(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    22.429] (II) NOUVEAU(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    22.429] (II) NOUVEAU(0): Modeline "1440x900"x0.0   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[    22.429] (II) NOUVEAU(0): Modeline "1440x900"x0.0  136.75  1440 1536 1688 1936  900 903 909 942 -hsync +vsync (70.6 kHz e)
[    22.429] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    22.429] (II) NOUVEAU(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[    22.429] (II) NOUVEAU(0): Printing probed modes for output DVI-I-1
[    22.429] (II) NOUVEAU(0): Modeline "1440x900"x59.9  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz eP)
[    22.429] (II) NOUVEAU(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    22.429] (II) NOUVEAU(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    22.429] (II) NOUVEAU(0): Modeline "1440x900"x75.0  136.75  1440 1536 1688 1936  900 903 909 942 -hsync +vsync (70.6 kHz e)
[    22.429] (II) NOUVEAU(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[    22.429] (II) NOUVEAU(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    22.429] (II) NOUVEAU(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz e)
[    22.429] (II) NOUVEAU(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    22.429] (II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    22.429] (II) NOUVEAU(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    22.429] (II) NOUVEAU(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    22.429] (II) NOUVEAU(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    22.429] (II) NOUVEAU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    22.429] (II) NOUVEAU(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    22.429] (II) NOUVEAU(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 491 520 -hsync -vsync (37.9 kHz e)
[    22.429] (II) NOUVEAU(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    22.430] (II) NOUVEAU(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    22.430] (II) NOUVEAU(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    22.430] (II) NOUVEAU(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    22.534] (II) NOUVEAU(0): EDID for output DVI-I-2
[    22.541] (II) NOUVEAU(0): EDID for output HDMI-1
[    22.541] (II) NOUVEAU(0): Output DVI-I-1 connected
[    22.541] (II) NOUVEAU(0): Output DVI-I-2 disconnected
[    22.541] (II) NOUVEAU(0): Output HDMI-1 disconnected
[    22.541] (II) NOUVEAU(0): Using exact sizes for initial modes
[    22.541] (II) NOUVEAU(0): Output DVI-I-1 using initial mode 1440x900
[    22.541] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    22.541] (--) NOUVEAU(0): Virtual size is 1440x900 (pitch 0)
[    22.541] (**) NOUVEAU(0):  Driver mode "1440x900": 106.5 MHz (scaled from 0.0 MHz), 55.9 kHz, 59.9 Hz
[    22.541] (II) NOUVEAU(0): Modeline "1440x900"x59.9  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz eP)
[    22.541] (**) NOUVEAU(0):  Driver mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
[    22.541] (II) NOUVEAU(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    22.541] (**) NOUVEAU(0):  Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
[    22.541] (II) NOUVEAU(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    22.541] (**) NOUVEAU(0):  Driver mode "1440x900": 136.8 MHz (scaled from 0.0 MHz), 70.6 kHz, 75.0 Hz
[    22.541] (II) NOUVEAU(0): Modeline "1440x900"x75.0  136.75  1440 1536 1688 1936  900 903 909 942 -hsync +vsync (70.6 kHz e)
[    22.541] (**) NOUVEAU(0):  Driver mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz
[    22.541] (II) NOUVEAU(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[    22.541] (**) NOUVEAU(0):  Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
[    22.541] (II) NOUVEAU(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    22.541] (**) NOUVEAU(0):  Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
[    22.541] (II) NOUVEAU(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz e)
[    22.541] (**) NOUVEAU(0):  Driver mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.1 Hz
[    22.541] (II) NOUVEAU(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    22.541] (**) NOUVEAU(0):  Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[    22.541] (II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    22.542] (**) NOUVEAU(0):  Driver mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz
[    22.542] (II) NOUVEAU(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    22.542] (**) NOUVEAU(0):  Driver mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz
[    22.542] (II) NOUVEAU(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    22.542] (**) NOUVEAU(0):  Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
[    22.542] (II) NOUVEAU(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    22.542] (**) NOUVEAU(0):  Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[    22.542] (II) NOUVEAU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    22.542] (**) NOUVEAU(0):  Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[    22.542] (II) NOUVEAU(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    22.542] (**) NOUVEAU(0):  Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz
[    22.542] (II) NOUVEAU(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 491 520 -hsync -vsync (37.9 kHz e)
[    22.542] (**) NOUVEAU(0):  Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
[    22.542] (II) NOUVEAU(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    22.542] (**) NOUVEAU(0):  Driver mode "640x480": 30.2 MHz (scaled from 0.0 MHz), 35.0 kHz, 66.7 Hz
[    22.542] (II) NOUVEAU(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    22.542] (**) NOUVEAU(0):  Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
[    22.542] (II) NOUVEAU(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    22.542] (**) NOUVEAU(0):  Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
[    22.542] (II) NOUVEAU(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    22.542] (**) NOUVEAU(0): Display dimensions: (410, 260) mm
[    22.542] (**) NOUVEAU(0): DPI set to (89, 87)
[    22.542] (II) Loading sub module "fb"
[    22.542] (II) LoadModule: "fb"
[    22.542] (II) Loading /usr/lib/xorg/modules/libfb.so
[    22.581] (II) Module fb: vendor="X.Org Foundation"
[    22.582]  compiled for 1.12.1.902, module version = 1.0.0
[    22.582]  ABI class: X.Org ANSI C Emulation, version 0.4
[    22.582] (II) Loading sub module "exa"
[    22.582] (II) LoadModule: "exa"
[    22.582] (II) Loading /usr/lib/xorg/modules/libexa.so
[    22.606] (II) Module exa: vendor="X.Org Foundation"
[    22.606]  compiled for 1.12.1.902, module version = 2.5.0
[    22.606]  ABI class: X.Org Video Driver, version 12.0
[    22.606] (II) Loading sub module "shadowfb"
[    22.606] (II) LoadModule: "shadowfb"
[    22.606] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[    22.620] (II) Module shadowfb: vendor="X.Org Foundation"
[    22.620]  compiled for 1.12.1.902, module version = 1.0.0
[    22.620]  ABI class: X.Org ANSI C Emulation, version 0.4
[    22.620] (II) UnloadModule: "vesa"
[    22.620] (II) Unloading vesa
[    22.620] (II) UnloadModule: "fbdev"
[    22.620] (II) Unloading fbdev
[    22.620] (II) UnloadSubModule: "fbdevhw"
[    22.620] (II) Unloading fbdevhw
[    22.620] (--) Depth 24 pixmap format is 32 bpp
[    22.624] (II) NOUVEAU(0): Opened GPU channel 1
[    22.624] (II) NOUVEAU(0): [DRI2] Setup complete
[    22.624] (II) NOUVEAU(0): [DRI2]   DRI driver: nouveau
[    22.624] (II) NOUVEAU(0): [DRI2]   VDPAU driver: nouveau
[    22.624] (II) NOUVEAU(0): GART: 511MiB available
[    22.631] (II) NOUVEAU(0): GART: Allocated 16MiB as a scratch buffer
[    22.653] (II) EXA(0): Driver allocated offscreen pixmaps
[    22.653] (II) EXA(0): Driver registered support for the following operations:
[    22.653] (II)         Solid
[    22.653] (II)         Copy
[    22.653] (II)         Composite (RENDER acceleration)
[    22.653] (II)         UploadToScreen
[    22.653] (II)         DownloadFromScreen
[    22.653] (==) NOUVEAU(0): Backing store disabled
[    22.653] (==) NOUVEAU(0): Silken mouse enabled
[    22.674] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[    22.674] (II) NOUVEAU(0): [XvMC] Extension initialized.
[    22.674] (==) NOUVEAU(0): DPMS enabled
[    22.674] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    22.674] (--) RandR disabled
[    22.674] (II) Initializing built-in extension Generic Event Extension
[    22.674] (II) Initializing built-in extension SHAPE
[    22.674] (II) Initializing built-in extension MIT-SHM
[    22.674] (II) Initializing built-in extension XInputExtension
[    22.674] (II) Initializing built-in extension XTEST
[    22.674] (II) Initializing built-in extension BIG-REQUESTS
[    22.674] (II) Initializing built-in extension SYNC
[    22.674] (II) Initializing built-in extension XKEYBOARD
[    22.674] (II) Initializing built-in extension XC-MISC
[    22.674] (II) Initializing built-in extension SECURITY
[    22.674] (II) Initializing built-in extension XINERAMA
[    22.674] (II) Initializing built-in extension XFIXES
[    22.674] (II) Initializing built-in extension RENDER
[    22.674] (II) Initializing built-in extension RANDR
[    22.675] (II) Initializing built-in extension COMPOSITE
[    22.675] (II) Initializing built-in extension DAMAGE
[    22.675] (II) SELinux: Disabled on system
[    23.379] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    23.379] (II) AIGLX: enabled GLX_INTEL_swap_event
[    23.379] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    23.379] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    23.380] (II) AIGLX: Loaded and initialized nouveau
[    23.380] (II) GLX: Initialized DRI2 GL provider for screen 0
[    23.383] (II) NOUVEAU(0): NVEnterVT is called.
[    25.394] (EE) NOUVEAU(0): failed to set mode: Device or resource busy
Fatal server error:
[    25.394] failed to create screen resources
[    25.394]
Please consult the The X.Org Foundation support
   at http://wiki.x.org
 for help.
[    25.394] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[    25.394]
[    25.394] (II) AIGLX: Suspending AIGLX clients for VT switch
[    25.394] (II) NOUVEAU(0): NVLeaveVT is called.
[    25.396] Server terminated with error (1). Closing log file.



Probleme vesa, fbdev et nv.

J'ai creer un fichier blacklist.conf dans/etc/modprobe.d/ et ajouter:

blacklist nv


mais rien ne ce passe, il ne ce lance pas.

Je télécharge l'image avec les firmwares non libres, on verra.

Merci. smile

#16 21-07-2012 10:56:47

paskal
autobahn
Lieu : ailleurs
Inscription : 14-06-2011
Site Web

Re : Installation debian unstable ( openbox )

frenesik a écrit :


[    25.394] (EE) NOUVEAU(0): failed to set mode: Device or resource busy
Fatal server error:
[    25.394] failed to create screen resources


Tout le problème vient de là sad


I'd love to change the world
But I don't know what to do
So I'll leave it up to you...

logo-sur-fond.png

Hors ligne

#17 21-07-2012 11:08:59

mortalius
Membre
Distrib. : Debian GNU/Linux stretch/sid
Noyau : Linux 4.0.0-2-amd64
(G)UI : Xfce 4.12
Inscription : 27-02-2012

Re : Installation debian unstable ( openbox )

Bonjour,
Ne pas oublier de qu'il ne faut avoir qu'un seul module d'activer entre celui des drivers nvidia et celui de nouveau . Sinon, ils rentreront en conflit .
Donc pour cela, si tu souhaite utiliser les drivers Nvidia, blacklist nv, sinon blacklist nouveau .

Hors ligne

#18 21-07-2012 12:47:19

frenesik
Invité

Re : Installation debian unstable ( openbox )

J'ai re-modifié mon blacklist.conf en ajoutant seulement:

blacklist nouveau



big_smile cela démarre, mais au moment d'arriver aux gestionnaire de connexion, écran noir.

Xorg.0.log:

[    14.772]
X.Org X Server 1.12.1.902 (1.12.2 RC 2)
Release Date: 2012-05-19
[    14.772] X Protocol Version 11, Revision 0
[    14.772] Build Operating System: Linux 3.2.0-2-amd64 x86_64 Debian
[    14.772] Current Operating System: Linux debian-xfce 3.2.0-3-amd64 #1 SMP Thu Jun 28 09:07:26 UTC 2012 x86_64
[    14.772] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-3-amd64 root=UUID=11de07e7-70fe-4abc-9743-3cda8bf7702f ro quiet
[    14.772] Build Date: 20 May 2012  08:57:17AM
[    14.772] xorg-server 2:1.12.1.902-1 (Cyril Brulebois <kibi@debian.org>)
[    14.772] Current version of pixman: 0.26.0
[    14.772]  Before reporting problems, check http://wiki.x.org
  to make sure that you have the latest version.
[    14.772] Markers: (--) probed, (**) from config file, (==) default setting,
  (++) from command line, (!!) notice, (II) informational,
  (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    14.772] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jul 21 11:48:35 2012
[    14.826] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    14.827] (==) No Layout section.  Using the first Screen section.
[    14.827] (==) No screen section available. Using defaults.
[    14.827] (**) |-->Screen "Default Screen Section" (0)
[    14.827] (**) |   |-->Monitor "<default monitor>"
[    14.828] (==) No monitor specified for screen "Default Screen Section".
  Using a default monitor configuration.
[    14.828] (==) Automatically adding devices
[    14.828] (==) Automatically enabling devices
[    14.886] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    14.886]  Entry deleted from font path.
[    14.942] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[    14.942]  Entry deleted from font path.
[    14.942] (==) FontPath set to:
  /usr/share/fonts/X11/misc,
  /usr/share/fonts/X11/100dpi/:unscaled,
  /usr/share/fonts/X11/75dpi/:unscaled,
  /usr/share/fonts/X11/Type1,
  /usr/share/fonts/X11/100dpi,
  /usr/share/fonts/X11/75dpi,
  built-ins
[    14.942] (==) ModulePath set to "/usr/lib/xorg/modules"
[    14.942] (II) The server relies on udev to provide the list of input devices.
  If no devices become available, reconfigure udev or disable AutoAddDevices.
[    14.942] (II) Loader magic: 0x7f232c452ae0
[    14.942] (II) Module ABI versions:
[    14.942]  X.Org ANSI C Emulation: 0.4
[    14.942]  X.Org Video Driver: 12.0
[    14.942]  X.Org XInput driver : 16.0
[    14.942]  X.Org Server Extension : 6.0
[    14.943] (--) PCI:*(0:3:0:0) 10de:1244:10de:089c rev 161, Mem @ 0xfc000000/33554432, 0xd8000000/134217728, 0xd4000000/67108864, I/O @ 0x0000ec00/128, BIOS @ 0x????????/524288
[    14.943] (II) Open ACPI successful (/var/run/acpid.socket)
[    14.943] (II) LoadModule: "extmod"
[    15.052] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    15.111] (II) Module extmod: vendor="X.Org Foundation"
[    15.111]  compiled for 1.12.1.902, module version = 1.0.0
[    15.111]  Module class: X.Org Server Extension
[    15.111]  ABI class: X.Org Server Extension, version 6.0
[    15.111] (II) Loading extension SELinux
[    15.111] (II) Loading extension MIT-SCREEN-SAVER
[    15.111] (II) Loading extension XFree86-VidModeExtension
[    15.111] (II) Loading extension XFree86-DGA
[    15.111] (II) Loading extension DPMS
[    15.111] (II) Loading extension XVideo
[    15.112] (II) Loading extension XVideo-MotionCompensation
[    15.112] (II) Loading extension X-Resource
[    15.112] (II) LoadModule: "dbe"
[    15.112] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    15.131] (II) Module dbe: vendor="X.Org Foundation"
[    15.131]  compiled for 1.12.1.902, module version = 1.0.0
[    15.131]  Module class: X.Org Server Extension
[    15.131]  ABI class: X.Org Server Extension, version 6.0
[    15.131] (II) Loading extension DOUBLE-BUFFER
[    15.131] (II) LoadModule: "glx"
[    15.131] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    15.187] (II) Module glx: vendor="X.Org Foundation"
[    15.187]  compiled for 1.12.1.902, module version = 1.0.0
[    15.187]  ABI class: X.Org Server Extension, version 6.0
[    15.187] (==) AIGLX enabled
[    15.188] (II) Loading extension GLX
[    15.188] (II) LoadModule: "record"
[    15.188] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    15.201] (II) Module record: vendor="X.Org Foundation"
[    15.201]  compiled for 1.12.1.902, module version = 1.13.0
[    15.201]  Module class: X.Org Server Extension
[    15.201]  ABI class: X.Org Server Extension, version 6.0
[    15.201] (II) Loading extension RECORD
[    15.201] (II) LoadModule: "dri"
[    15.201] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    15.252] (II) Module dri: vendor="X.Org Foundation"
[    15.252]  compiled for 1.12.1.902, module version = 1.0.0
[    15.252]  ABI class: X.Org Server Extension, version 6.0
[    15.252] (II) Loading extension XFree86-DRI
[    15.252] (II) LoadModule: "dri2"
[    15.252] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    15.260] (II) Module dri2: vendor="X.Org Foundation"
[    15.260]  compiled for 1.12.1.902, module version = 1.2.0
[    15.260]  ABI class: X.Org Server Extension, version 6.0
[    15.260] (II) Loading extension DRI2
[    15.260] (==) Matched nouveau as autoconfigured driver 0
[    15.260] (==) Matched nv as autoconfigured driver 1
[    15.260] (==) Matched vesa as autoconfigured driver 2
[    15.260] (==) Matched fbdev as autoconfigured driver 3
[    15.260] (==) Assigned the driver to the xf86ConfigLayout
[    15.260] (II) LoadModule: "nouveau"
[    15.277] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[    15.310] (II) Module nouveau: vendor="X.Org Foundation"
[    15.311]  compiled for 1.12.1, module version = 0.0.16
[    15.311]  Module class: X.Org Video Driver
[    15.311]  ABI class: X.Org Video Driver, version 12.0
[    15.311] (II) LoadModule: "nv"
[    15.311] (WW) Warning, couldn't open module nv
[    15.311] (II) UnloadModule: "nv"
[    15.311] (II) Unloading nv
[    15.311] (EE) Failed to load module "nv" (module does not exist, 0)
[    15.311] (II) LoadModule: "vesa"
[    15.312] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    15.320] (II) Module vesa: vendor="X.Org Foundation"
[    15.320]  compiled for 1.12.1, module version = 2.3.1
[    15.320]  Module class: X.Org Video Driver
[    15.320]  ABI class: X.Org Video Driver, version 12.0
[    15.320] (II) LoadModule: "fbdev"
[    15.320] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    15.328] (II) Module fbdev: vendor="X.Org Foundation"
[    15.328]  compiled for 1.12.1, module version = 0.4.2
[    15.328]  ABI class: X.Org Video Driver, version 12.0
[    15.328] (II) NOUVEAU driver Date:   Wed Mar 21 14:56:55 2012 +1000
[    15.328] (II) NOUVEAU driver for NVIDIA chipset families :
[    15.328]  RIVA TNT        (NV04)
[    15.329]  RIVA TNT2       (NV05)
[    15.329]  GeForce 256     (NV10)
[    15.329]  GeForce 2       (NV11, NV15)
[    15.329]  GeForce 4MX     (NV17, NV18)
[    15.329]  GeForce 3       (NV20)
[    15.329]  GeForce 4Ti     (NV25, NV28)
[    15.329]  GeForce FX      (NV3x)
[    15.329]  GeForce 6       (NV4x)
[    15.329]  GeForce 7       (G7x)
[    15.329]  GeForce 8       (G8x)
[    15.329]  GeForce GTX 200 (NVA0)
[    15.329]  GeForce GTX 400 (NVC0)
[    15.329] (II) VESA: driver for VESA chipsets: vesa
[    15.329] (II) FBDEV: driver for framebuffer: fbdev
[    15.329] (++) using VT number 7

[    15.332] drmOpenDevice: node name is /dev/dri/card0
[    16.573] drmOpenByBusid: Searching for BusID pci:0000:03:00.0
[    16.573] drmOpenDevice: node name is /dev/dri/card0
[    16.573] drmOpenDevice: open result is 8, (OK)
[    16.573] drmOpenByBusid: drmOpenMinor returns 8
[    16.573] drmOpenByBusid: drmGetBusid reports pci:0000:03:00.0
[    16.573] (II) [drm] nouveau interface version: 0.0.16
[    16.573] (WW) Falling back to old probe method for vesa
[    16.573] (WW) Falling back to old probe method for fbdev
[    16.573] (II) Loading sub module "fbdevhw"
[    16.573] (II) LoadModule: "fbdevhw"
[    16.573] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    16.582] (II) Module fbdevhw: vendor="X.Org Foundation"
[    16.582]  compiled for 1.12.1.902, module version = 0.0.2
[    16.582]  ABI class: X.Org Video Driver, version 12.0
[    16.582] (II) Loading sub module "dri"
[    16.582] (II) LoadModule: "dri"
[    16.582] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    16.582] (II) Module dri: vendor="X.Org Foundation"
[    16.582]  compiled for 1.12.1.902, module version = 1.0.0
[    16.582]  ABI class: X.Org Server Extension, version 6.0
[    16.582] (II) NOUVEAU(0): Loaded DRI module
[    16.582] drmOpenDevice: node name is /dev/dri/card0
[    16.582] drmOpenDevice: open result is 9, (OK)
[    16.582] drmOpenDevice: node name is /dev/dri/card0
[    16.582] drmOpenDevice: open result is 9, (OK)
[    16.582] drmOpenByBusid: Searching for BusID pci:0000:03:00.0
[    16.582] drmOpenDevice: node name is /dev/dri/card0
[    16.582] drmOpenDevice: open result is 9, (OK)
[    16.582] drmOpenByBusid: drmOpenMinor returns 9
[    16.582] drmOpenByBusid: drmGetBusid reports pci:0000:03:00.0
[    16.582] (II) [drm] DRM interface version 1.4
[    16.582] (II) [drm] DRM open master succeeded.
[    16.582] (--) NOUVEAU(0): Chipset: "NVIDIA NVcf"
[    16.582] (II) NOUVEAU(0): Creating default Display subsection in Screen section
  "Default Screen Section" for depth/fbbpp 24/32
[    16.582] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[    16.582] (==) NOUVEAU(0): RGB weight 888
[    16.582] (==) NOUVEAU(0): Default visual is TrueColor
[    16.582] (==) NOUVEAU(0): Using HW cursor
[    16.582] (==) NOUVEAU(0): GLX sync to VBlank disabled.
[    16.582] (==) NOUVEAU(0): Page flipping enabled
[    16.582] (==) NOUVEAU(0): Swap limit set to 2 [Max allowed 2]
[    16.690] (II) NOUVEAU(0): Output DVI-I-1 has no monitor section
[    16.794] (II) NOUVEAU(0): Output DVI-I-2 has no monitor section
[    16.801] (II) NOUVEAU(0): Output HDMI-1 has no monitor section
[    16.906] (II) NOUVEAU(0): EDID for output DVI-I-1
[    16.906] (II) NOUVEAU(0): Manufacturer: SAM  Model: 226  Serial#: 1212231993
[    16.906] (II) NOUVEAU(0): Year: 2006  Week: 25
[    16.906] (II) NOUVEAU(0): EDID Version: 1.3
[    16.906] (II) NOUVEAU(0): Digital Display Input
[    16.906] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 41  vert.: 26
[    16.906] (II) NOUVEAU(0): Gamma: 2.35
[    16.906] (II) NOUVEAU(0): DPMS capabilities: Off
[    16.906] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[    16.906] (II) NOUVEAU(0): First detailed timing is preferred mode
[    16.906] (II) NOUVEAU(0): redX: 0.636 redY: 0.349   greenX: 0.290 greenY: 0.589
[    16.906] (II) NOUVEAU(0): blueX: 0.143 blueY: 0.080   whiteX: 0.313 whiteY: 0.329
[    16.906] (II) NOUVEAU(0): Supported established timings:
[    16.906] (II) NOUVEAU(0): 720x400@70Hz
[    16.906] (II) NOUVEAU(0): 640x480@60Hz
[    16.906] (II) NOUVEAU(0): 640x480@67Hz
[    16.906] (II) NOUVEAU(0): 640x480@72Hz
[    16.906] (II) NOUVEAU(0): 640x480@75Hz
[    16.906] (II) NOUVEAU(0): 800x600@56Hz
[    16.906] (II) NOUVEAU(0): 800x600@60Hz
[    16.906] (II) NOUVEAU(0): 800x600@72Hz
[    16.906] (II) NOUVEAU(0): 800x600@75Hz
[    16.906] (II) NOUVEAU(0): 832x624@75Hz
[    16.906] (II) NOUVEAU(0): 1024x768@60Hz
[    16.906] (II) NOUVEAU(0): 1024x768@70Hz
[    16.906] (II) NOUVEAU(0): 1024x768@75Hz
[    16.906] (II) NOUVEAU(0): 1280x1024@75Hz
[    16.906] (II) NOUVEAU(0): 1152x864@75Hz
[    16.906] (II) NOUVEAU(0): Manufacturer's mask: 0
[    16.906] (II) NOUVEAU(0): Supported standard timings:
[    16.906] (II) NOUVEAU(0): #0: hsize: 1440  vsize 900  refresh: 60  vid: 149
[    16.906] (II) NOUVEAU(0): #1: hsize: 1440  vsize 900  refresh: 75  vid: 3989
[    16.906] (II) NOUVEAU(0): #2: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    16.906] (II) NOUVEAU(0): #3: hsize: 1280  vsize 960  refresh: 60  vid: 16513
[    16.906] (II) NOUVEAU(0): #4: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[    16.906] (II) NOUVEAU(0): Supported detailed timing:
[    16.906] (II) NOUVEAU(0): clock: 106.5 MHz   Image Size:  410 x 257 mm
[    16.906] (II) NOUVEAU(0): h_active: 1440  h_sync: 1520  h_sync_end 1672 h_blank_end 1904 h_border: 0
[    16.906] (II) NOUVEAU(0): v_active: 900  v_sync: 903  v_sync_end 909 v_blanking: 934 v_border: 0
[    16.906] (II) NOUVEAU(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 145 MHz
[    16.906] (II) NOUVEAU(0): Monitor name: SyncMaster
[    16.906] (II) NOUVEAU(0): Serial No: HSHL606355
[    16.906] (II) NOUVEAU(0): EDID (in hex):
[    16.906] (II) NOUVEAU(0):   00ffffffffffff004c2d260239314148
[    16.906] (II) NOUVEAU(0):   1910010380291a872ad7a5a2594a9624
[    16.906] (II) NOUVEAU(0):   145054bfef809500950f81808140714f
[    16.906] (II) NOUVEAU(0):   0101010101019a29a0d0518422305098
[    16.906] (II) NOUVEAU(0):   36009a011100001c000000fd00384b1e
[    16.906] (II) NOUVEAU(0):   510e000a202020202020000000fc0053
[    16.906] (II) NOUVEAU(0):   796e634d61737465720a2020000000ff
[    16.906] (II) NOUVEAU(0):   004853484c3630363335350a202000a8
[    16.906] (II) NOUVEAU(0): EDID vendor "SAM", prod id 550
[    16.906] (II) NOUVEAU(0): Using EDID range info for horizontal sync
[    16.906] (II) NOUVEAU(0): Using EDID range info for vertical refresh
[    16.906] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    16.906] (II) NOUVEAU(0): Modeline "1440x900"x0.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz eP)
[    16.906] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    16.906] (II) NOUVEAU(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    16.906] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    16.906] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[    16.906] (II) NOUVEAU(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    16.906] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    16.906] (II) NOUVEAU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    16.906] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    16.906] (II) NOUVEAU(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    16.906] (II) NOUVEAU(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    16.906] (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    16.906] (II) NOUVEAU(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    16.906] (II) NOUVEAU(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    16.906] (II) NOUVEAU(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    16.906] (II) NOUVEAU(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    16.906] (II) NOUVEAU(0): Modeline "1440x900"x0.0   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[    16.906] (II) NOUVEAU(0): Modeline "1440x900"x0.0  136.75  1440 1536 1688 1936  900 903 909 942 -hsync +vsync (70.6 kHz e)
[    16.906] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    16.906] (II) NOUVEAU(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[    16.906] (II) NOUVEAU(0): Printing probed modes for output DVI-I-1
[    16.906] (II) NOUVEAU(0): Modeline "1440x900"x59.9  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz eP)
[    16.906] (II) NOUVEAU(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    16.906] (II) NOUVEAU(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    16.906] (II) NOUVEAU(0): Modeline "1440x900"x75.0  136.75  1440 1536 1688 1936  900 903 909 942 -hsync +vsync (70.6 kHz e)
[    16.906] (II) NOUVEAU(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[    16.906] (II) NOUVEAU(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    16.906] (II) NOUVEAU(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz e)
[    16.906] (II) NOUVEAU(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    16.906] (II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    16.906] (II) NOUVEAU(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    16.906] (II) NOUVEAU(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    16.906] (II) NOUVEAU(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    16.906] (II) NOUVEAU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    16.906] (II) NOUVEAU(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    16.906] (II) NOUVEAU(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 491 520 -hsync -vsync (37.9 kHz e)
[    16.906] (II) NOUVEAU(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    16.906] (II) NOUVEAU(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    16.906] (II) NOUVEAU(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    16.906] (II) NOUVEAU(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    17.011] (II) NOUVEAU(0): EDID for output DVI-I-2
[    17.018] (II) NOUVEAU(0): EDID for output HDMI-1
[    17.018] (II) NOUVEAU(0): Output DVI-I-1 connected
[    17.018] (II) NOUVEAU(0): Output DVI-I-2 disconnected
[    17.018] (II) NOUVEAU(0): Output HDMI-1 disconnected
[    17.018] (II) NOUVEAU(0): Using exact sizes for initial modes
[    17.018] (II) NOUVEAU(0): Output DVI-I-1 using initial mode 1440x900
[    17.018] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    17.018] (--) NOUVEAU(0): Virtual size is 1440x900 (pitch 0)
[    17.018] (**) NOUVEAU(0):  Driver mode "1440x900": 106.5 MHz (scaled from 0.0 MHz), 55.9 kHz, 59.9 Hz
[    17.018] (II) NOUVEAU(0): Modeline "1440x900"x59.9  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz eP)
[    17.018] (**) NOUVEAU(0):  Driver mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
[    17.018] (II) NOUVEAU(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    17.018] (**) NOUVEAU(0):  Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
[    17.018] (II) NOUVEAU(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    17.018] (**) NOUVEAU(0):  Driver mode "1440x900": 136.8 MHz (scaled from 0.0 MHz), 70.6 kHz, 75.0 Hz
[    17.018] (II) NOUVEAU(0): Modeline "1440x900"x75.0  136.75  1440 1536 1688 1936  900 903 909 942 -hsync +vsync (70.6 kHz e)
[    17.018] (**) NOUVEAU(0):  Driver mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz
[    17.018] (II) NOUVEAU(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[    17.018] (**) NOUVEAU(0):  Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
[    17.018] (II) NOUVEAU(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    17.018] (**) NOUVEAU(0):  Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
[    17.018] (II) NOUVEAU(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz e)
[    17.018] (**) NOUVEAU(0):  Driver mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.1 Hz
[    17.018] (II) NOUVEAU(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    17.018] (**) NOUVEAU(0):  Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[    17.018] (II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    17.018] (**) NOUVEAU(0):  Driver mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz
[    17.018] (II) NOUVEAU(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    17.018] (**) NOUVEAU(0):  Driver mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz
[    17.018] (II) NOUVEAU(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    17.018] (**) NOUVEAU(0):  Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
[    17.018] (II) NOUVEAU(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    17.018] (**) NOUVEAU(0):  Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[    17.018] (II) NOUVEAU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    17.018] (**) NOUVEAU(0):  Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[    17.018] (II) NOUVEAU(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    17.018] (**) NOUVEAU(0):  Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz
[    17.018] (II) NOUVEAU(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 491 520 -hsync -vsync (37.9 kHz e)
[    17.018] (**) NOUVEAU(0):  Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
[    17.018] (II) NOUVEAU(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    17.018] (**) NOUVEAU(0):  Driver mode "640x480": 30.2 MHz (scaled from 0.0 MHz), 35.0 kHz, 66.7 Hz
[    17.018] (II) NOUVEAU(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    17.018] (**) NOUVEAU(0):  Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
[    17.018] (II) NOUVEAU(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    17.018] (**) NOUVEAU(0):  Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
[    17.018] (II) NOUVEAU(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    17.018] (**) NOUVEAU(0): Display dimensions: (410, 260) mm
[    17.018] (**) NOUVEAU(0): DPI set to (89, 87)
[    17.018] (II) Loading sub module "fb"
[    17.018] (II) LoadModule: "fb"
[    17.019] (II) Loading /usr/lib/xorg/modules/libfb.so
[    17.020] (II) Module fb: vendor="X.Org Foundation"
[    17.020]  compiled for 1.12.1.902, module version = 1.0.0
[    17.020]  ABI class: X.Org ANSI C Emulation, version 0.4
[    17.020] (II) Loading sub module "exa"
[    17.020] (II) LoadModule: "exa"
[    17.020] (II) Loading /usr/lib/xorg/modules/libexa.so
[    17.021] (II) Module exa: vendor="X.Org Foundation"
[    17.021]  compiled for 1.12.1.902, module version = 2.5.0
[    17.021]  ABI class: X.Org Video Driver, version 12.0
[    17.021] (II) Loading sub module "shadowfb"
[    17.022] (II) LoadModule: "shadowfb"
[    17.022] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[    17.022] (II) Module shadowfb: vendor="X.Org Foundation"
[    17.022]  compiled for 1.12.1.902, module version = 1.0.0
[    17.022]  ABI class: X.Org ANSI C Emulation, version 0.4
[    17.022] (II) UnloadModule: "vesa"
[    17.022] (II) Unloading vesa
[    17.022] (II) UnloadModule: "fbdev"
[    17.022] (II) Unloading fbdev
[    17.022] (II) UnloadSubModule: "fbdevhw"
[    17.022] (II) Unloading fbdevhw
[    17.022] (--) Depth 24 pixmap format is 32 bpp
[    17.026] (II) NOUVEAU(0): Opened GPU channel 1
[    17.026] (II) NOUVEAU(0): [DRI2] Setup complete
[    17.026] (II) NOUVEAU(0): [DRI2]   DRI driver: nouveau
[    17.026] (II) NOUVEAU(0): [DRI2]   VDPAU driver: nouveau
[    17.026] (II) NOUVEAU(0): GART: 511MiB available
[    17.033] (II) NOUVEAU(0): GART: Allocated 16MiB as a scratch buffer
[    17.036] (II) EXA(0): Driver allocated offscreen pixmaps
[    17.036] (II) EXA(0): Driver registered support for the following operations:
[    17.036] (II)         Solid
[    17.036] (II)         Copy
[    17.036] (II)         Composite (RENDER acceleration)
[    17.036] (II)         UploadToScreen
[    17.036] (II)         DownloadFromScreen
[    17.036] (==) NOUVEAU(0): Backing store disabled
[    17.036] (==) NOUVEAU(0): Silken mouse enabled
[    17.036] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[    17.036] (II) NOUVEAU(0): [XvMC] Extension initialized.
[    17.036] (==) NOUVEAU(0): DPMS enabled
[    17.036] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    17.037] (--) RandR disabled
[    17.037] (II) Initializing built-in extension Generic Event Extension
[    17.037] (II) Initializing built-in extension SHAPE
[    17.037] (II) Initializing built-in extension MIT-SHM
[    17.037] (II) Initializing built-in extension XInputExtension
[    17.037] (II) Initializing built-in extension XTEST
[    17.037] (II) Initializing built-in extension BIG-REQUESTS
[    17.037] (II) Initializing built-in extension SYNC
[    17.037] (II) Initializing built-in extension XKEYBOARD
[    17.037] (II) Initializing built-in extension XC-MISC
[    17.037] (II) Initializing built-in extension SECURITY
[    17.037] (II) Initializing built-in extension XINERAMA
[    17.037] (II) Initializing built-in extension XFIXES
[    17.037] (II) Initializing built-in extension RENDER
[    17.037] (II) Initializing built-in extension RANDR
[    17.037] (II) Initializing built-in extension COMPOSITE
[    17.037] (II) Initializing built-in extension DAMAGE
[    17.037] (II) SELinux: Disabled on system
[    17.387] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    17.387] (II) AIGLX: enabled GLX_INTEL_swap_event
[    17.387] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    17.387] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    17.388] (II) AIGLX: Loaded and initialized nouveau
[    17.388] (II) GLX: Initialized DRI2 GL provider for screen 0
[    17.676] (II) NOUVEAU(0): NVEnterVT is called.
[    19.677] (II) NOUVEAU(0): Setting screen physical size to 381 x 238
[    19.677] resize called 1440 900
[    20.010] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    20.010] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    20.010] (II) LoadModule: "evdev"
[    20.010] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    20.018] (II) Module evdev: vendor="X.Org Foundation"
[    20.018]  compiled for 1.12.1, module version = 2.7.0
[    20.018]  Module class: X.Org XInput Driver
[    20.018]  ABI class: X.Org XInput driver, version 16.0
[    20.018] (II) Using input driver 'evdev' for 'Power Button'
[    20.018] (**) Power Button: always reports core events
[    20.018] (**) evdev: Power Button: Device: "/dev/input/event3"
[    20.018] (--) evdev: Power Button: Vendor 0 Product 0x1
[    20.018] (--) evdev: Power Button: Found keys
[    20.018] (II) evdev: Power Button: Configuring as keyboard
[    20.018] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[    20.018] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    20.018] (**) Option "xkb_rules" "evdev"
[    20.018] (**) Option "xkb_model" "pc105"
[    20.018] (**) Option "xkb_layout" "fr"
[    20.018] (**) Option "xkb_variant" "latin9"
[    20.048] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    20.048] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    20.048] (II) Using input driver 'evdev' for 'Power Button'
[    20.048] (**) Power Button: always reports core events
[    20.048] (**) evdev: Power Button: Device: "/dev/input/event2"
[    20.048] (--) evdev: Power Button: Vendor 0 Product 0x1
[    20.048] (--) evdev: Power Button: Found keys
[    20.048] (II) evdev: Power Button: Configuring as keyboard
[    20.048] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[    20.048] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    20.048] (**) Option "xkb_rules" "evdev"
[    20.048] (**) Option "xkb_model" "pc105"
[    20.048] (**) Option "xkb_layout" "fr"
[    20.048] (**) Option "xkb_variant" "latin9"
[    20.049] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event10)
[    20.049] (II) No input driver specified, ignoring this device.
[    20.049] (II) This device may have been added with another device file.
[    20.049] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event7)
[    20.049] (II) No input driver specified, ignoring this device.
[    20.049] (II) This device may have been added with another device file.
[    20.049] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event8)
[    20.049] (II) No input driver specified, ignoring this device.
[    20.049] (II) This device may have been added with another device file.
[    20.049] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event9)
[    20.049] (II) No input driver specified, ignoring this device.
[    20.049] (II) This device may have been added with another device file.
[    20.050] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event5)
[    20.050] (II) No input driver specified, ignoring this device.
[    20.050] (II) This device may have been added with another device file.
[    20.050] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event6)
[    20.050] (II) No input driver specified, ignoring this device.
[    20.050] (II) This device may have been added with another device file.
[    20.050] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event0)
[    20.050] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[    20.050] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[    20.050] (**) Logitech USB Receiver: always reports core events
[    20.050] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event0"
[    20.050] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc513
[    20.050] (--) evdev: Logitech USB Receiver: Found keys
[    20.050] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[    20.050] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input0/event0"
[    20.050] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 8)
[    20.050] (**) Option "xkb_rules" "evdev"
[    20.050] (**) Option "xkb_model" "pc105"
[    20.050] (**) Option "xkb_layout" "fr"
[    20.050] (**) Option "xkb_variant" "latin9"
[    20.050] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event1)
[    20.050] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[    20.050] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[    20.050] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[    20.051] (**) Logitech USB Receiver: always reports core events
[    20.051] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event1"
[    20.051] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc513
[    20.051] (--) evdev: Logitech USB Receiver: Found 12 mouse buttons
[    20.051] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[    20.051] (--) evdev: Logitech USB Receiver: Found relative axes
[    20.051] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[    20.051] (--) evdev: Logitech USB Receiver: Found absolute axes
[    20.051] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[    20.051] (--) evdev: Logitech USB Receiver: Found keys
[    20.051] (II) evdev: Logitech USB Receiver: Configuring as mouse
[    20.051] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[    20.051] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[    20.051] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[    20.051] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    20.051] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/input/input1/event1"
[    20.051] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 9)
[    20.051] (**) Option "xkb_rules" "evdev"
[    20.051] (**) Option "xkb_model" "pc105"
[    20.051] (**) Option "xkb_layout" "fr"
[    20.051] (**) Option "xkb_variant" "latin9"
[    20.051] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[    20.051] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[    20.051] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[    20.051] (**) Logitech USB Receiver: (accel) acceleration profile 0
[    20.051] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[    20.051] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[    20.051] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[    20.051] (II) No input driver specified, ignoring this device.
[    20.051] (II) This device may have been added with another device file.
[    20.051] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[    20.051] (II) No input driver specified, ignoring this device.
[    20.051] (II) This device may have been added with another device file.



Je suis à votre écoute, ce problème est loin de mes connaissances.

#19 21-07-2012 21:37:34

paskal
autobahn
Lieu : ailleurs
Inscription : 14-06-2011
Site Web

Re : Installation debian unstable ( openbox )

Curieux cette histoire : tu blackliste nouveau et c'est lui qui est chargé et configuré ???

Qu'est-ce que ça donne en mode dépannage ?

I'd love to change the world
But I don't know what to do
So I'll leave it up to you...

logo-sur-fond.png

Hors ligne

Pied de page des forums