Vous n'êtes pas identifié(e).
Dernière modification par stf31 (17-01-2016 09:37:00)
Hors ligne
Je peux obtenir des détails sur le paquet avec
Même si ton modèle n'y est pas indiqué, il fait peut être parti des possibly others ?
Ben
___________________
La seule question bête, c'est celle qu'on ne pose pas.
En ligne
Mais le résultat est identique, cela ne fonctionne toujours pas
Edit à toto :
Mise les balises code à la place des balises quaote.
Dernière modification par stf31 (05-01-2016 13:52:04)
Hors ligne
et
lorsque tu branches la clé
Ben
___________________
La seule question bête, c'est celle qu'on ne pose pas.
En ligne
Bus 004 Device 003: ID 0518:0001 EzKEY Corp. USB to PS2 Adaptor v1.09
Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 002: ID 0fcf:1008 Dynastream Innovations, Inc. Mini stick Suunto
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 003: ID 058f:6362 Alcor Micro Corp. Flash Card Reader/Writer
Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
et dmesg (c'est un peu plus long)
0 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x00000000DF3952A0 0009AA (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 0x00000000DF395C50 000A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: BGRT 0x00000000DF396740 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011effffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x11effffff]
[ 0.000000] NODE_DATA [mem 0x11eff7000-0x11effbfff]
[ 0.000000] [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff88011a600000-ffff88011dffffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x11effffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0xde94ffff]
[ 0.000000] node 0: [mem 0xdf40a000-0xdf7fffff]
[ 0.000000] node 0: [mem 0x100000000-0x11effffff]
[ 0.000000] On node 0 totalpages: 1039587
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12423 pages used for memmap
[ 0.000000] DMA32 zone: 908614 pages, LIFO batch:31
[ 0.000000] Normal zone: 1736 pages used for memmap
[ 0.000000] Normal zone: 126976 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xde950000-0xdf141fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdf142000-0xdf389fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdf38a000-0xdf396fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdf397000-0xdf3c1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdf3c2000-0xdf3c6fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdf3c7000-0xdf409fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdf800000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xdf800000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88011ec00000 s80896 r8192 d21504 u524288
[ 0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1025351
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 root=UUID=32283710-29ff-43f4-a341-794927bae9d4 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 4006264K/4158348K available (5219K kernel code, 947K rwdata, 1836K rodata, 1204K init, 840K bss, 152084K reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:33024 nr_irqs:712 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3311.278 MHz processor
[ 0.000025] Calibrating delay loop (skipped), value calculated using timer frequency.. 6622.55 BogoMIPS (lpj=13245112)
[ 0.000027] pid_max: default: 32768 minimum: 301
[ 0.000033] ACPI: Core revision 20140424
[ 0.005465] ACPI: All ACPI Tables successfully acquired
[ 0.005485] Security Framework initialized
[ 0.005493] AppArmor: AppArmor disabled by boot time parameter
[ 0.005494] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.005680] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.006617] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.007010] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.007014] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.007198] Initializing cgroup subsys memory
[ 0.007202] Initializing cgroup subsys devices
[ 0.007207] Initializing cgroup subsys freezer
[ 0.007209] Initializing cgroup subsys net_cls
[ 0.007212] Initializing cgroup subsys blkio
[ 0.007215] Initializing cgroup subsys perf_event
[ 0.007216] Initializing cgroup subsys net_prio
[ 0.007235] CPU: Physical Processor ID: 0
[ 0.007236] CPU: Processor Core ID: 0
[ 0.007239] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.007241] mce: CPU supports 9 MCE banks
[ 0.007252] CPU0: Thermal monitoring enabled (TM1)
[ 0.007259] process: using mwait in idle threads
[ 0.007261] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
tlb_flushall_shift: 6
[ 0.007339] Freeing SMP alternatives memory: 20K (ffffffff81a1b000 - ffffffff81a20000)
[ 0.014483] ftrace: allocating 21679 entries in 85 pages
[ 0.022028] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.061680] smpboot: CPU0: Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz (fam: 06, model: 2a, stepping: 07)
[ 0.061685] TSC deadline timer enabled
[ 0.061701] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
[ 0.061716] ... version: 3
[ 0.061717] ... bit width: 48
[ 0.061717] ... generic registers: 8
[ 0.061718] ... value mask: 0000ffffffffffff
[ 0.061719] ... max period: 0000ffffffffffff
[ 0.061719] ... fixed-purpose events: 3
[ 0.061720] ... event mask: 00000007000000ff
[ 0.062784] x86: Booting SMP configuration:
[ 0.062785] .... node #0, CPUs: #1
[ 0.075847] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.075926] #2 #3
[ 0.102265] x86: Booted up 1 node, 4 CPUs
[ 0.102268] smpboot: Total of 4 processors activated (26490.22 BogoMIPS)
[ 0.104531] devtmpfs: initialized
[ 0.106427] PM: Registering ACPI NVS region [mem 0xdf142000-0xdf389fff] (2392064 bytes)
[ 0.106462] PM: Registering ACPI NVS region [mem 0xdf397000-0xdf3c1fff] (176128 bytes)
[ 0.106466] PM: Registering ACPI NVS region [mem 0xdf3c7000-0xdf409fff] (274432 bytes)
[ 0.107103] pinctrl core: initialized pinctrl subsystem
[ 0.107156] NET: Registered protocol family 16
[ 0.107242] cpuidle: using governor ladder
[ 0.107244] cpuidle: using governor menu
[ 0.107272] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.107273] ACPI: bus type PCI registered
[ 0.107275] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.107334] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.107336] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.107396] PCI: Using configuration type 1 for base access
[ 0.122604] ACPI: Added _OSI(Module Device)
[ 0.122605] ACPI: Added _OSI(Processor Device)
[ 0.122606] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.122607] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.124519] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.137361] ACPI: Dynamic OEM Table Load:
[ 0.137366] ACPI: SSDT 0xFFFF880119A10000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.150437] ACPI: Dynamic OEM Table Load:
[ 0.150440] ACPI: SSDT 0xFFFF880119A1D000 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.162349] ACPI: Dynamic OEM Table Load:
[ 0.162353] ACPI: SSDT 0xFFFF880119838A00 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.172796] ACPI: Interpreter enabled
[ 0.172803] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[ 0.172813] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.172814] ACPI: Using IOAPIC for interrupt routing
[ 0.172834] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.177159] ACPI: Power Resource [FN00] (off)
[ 0.177221] ACPI: Power Resource [FN01] (off)
[ 0.177282] ACPI: Power Resource [FN02] (off)
[ 0.177341] ACPI: Power Resource [FN03] (off)
[ 0.177399] ACPI: Power Resource [FN04] (off)
[ 0.177832] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.177836] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.177920] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[ 0.177997] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 0.178433] PCI host bridge to bus 0000:00
[ 0.178436] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.178437] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.178438] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.178439] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.178441] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.178442] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.178443] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.178444] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.178445] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 0.178446] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 0.178447] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff]
[ 0.178453] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
[ 0.178517] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[ 0.178541] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.178568] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.178625] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 0.178646] pci 0000:00:16.0: reg 0x10: [mem 0xf730a000-0xf730a00f 64bit]
[ 0.178715] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.178785] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 0.178803] pci 0000:00:1a.0: reg 0x10: [mem 0xf7307000-0xf73073ff]
[ 0.178887] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.178929] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.178964] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 0.178978] pci 0000:00:1b.0: reg 0x10: [mem 0xf7300000-0xf7303fff 64bit]
[ 0.179045] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.179077] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.179109] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 0.179185] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.179219] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.179252] pci 0000:00:1c.4: [8086:244e] type 01 class 0x060401
[ 0.179328] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.179362] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.179394] pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
[ 0.179470] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.179505] pci 0000:00:1c.5: System wakeup disabled by ACPI
[ 0.179536] pci 0000:00:1c.6: [8086:1c1c] type 01 class 0x060400
[ 0.179612] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 0.179646] pci 0000:00:1c.6: System wakeup disabled by ACPI
[ 0.179676] pci 0000:00:1c.7: [8086:1c1e] type 01 class 0x060400
[ 0.179752] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[ 0.179786] pci 0000:00:1c.7: System wakeup disabled by ACPI
[ 0.179821] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 0.179840] pci 0000:00:1d.0: reg 0x10: [mem 0xf7306000-0xf73063ff]
[ 0.179923] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.179964] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.179997] pci 0000:00:1f.0: [8086:1c4a] type 00 class 0x060100
[ 0.180146] pci 0000:00:1f.2: [8086:1c00] type 00 class 0x01018f
[ 0.180159] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7]
[ 0.180166] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3]
[ 0.180172] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7]
[ 0.180178] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3]
[ 0.180185] pci 0000:00:1f.2: reg 0x20: [io 0xf090-0xf09f]
[ 0.180191] pci 0000:00:1f.2: reg 0x24: [io 0xf080-0xf08f]
[ 0.180268] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 0.180281] pci 0000:00:1f.3: reg 0x10: [mem 0xf7305000-0xf73050ff 64bit]
[ 0.180300] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
[ 0.180365] pci 0000:00:1f.5: [8086:1c08] type 00 class 0x010185
[ 0.180378] pci 0000:00:1f.5: reg 0x10: [io 0xf070-0xf077]
[ 0.180384] pci 0000:00:1f.5: reg 0x14: [io 0xf060-0xf063]
[ 0.180391] pci 0000:00:1f.5: reg 0x18: [io 0xf050-0xf057]
[ 0.180397] pci 0000:00:1f.5: reg 0x1c: [io 0xf040-0xf043]
[ 0.180404] pci 0000:00:1f.5: reg 0x20: [io 0xf030-0xf03f]
[ 0.180410] pci 0000:00:1f.5: reg 0x24: [io 0xf020-0xf02f]
[ 0.180521] pci 0000:01:00.0: [10de:104a] type 00 class 0x030000
[ 0.180530] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[ 0.180538] pci 0000:01:00.0: reg 0x14: [mem 0xe8000000-0xefffffff 64bit pref]
[ 0.180546] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.180551] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.180557] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[ 0.180625] pci 0000:01:00.1: [10de:0e08] type 00 class 0x040300
[ 0.180633] pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
[ 0.189022] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.189026] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.189030] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.189034] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
[ 0.189117] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.189193] pci 0000:03:00.0: [1b21:1080] type 01 class 0x060401
[ 0.189308] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.189334] pci 0000:00:1c.4: PCI bridge to [bus 03-04] (subtractive decode)
[ 0.189343] pci 0000:00:1c.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.189344] pci 0000:00:1c.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.189345] pci 0000:00:1c.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.189346] pci 0000:00:1c.4: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 0.189348] pci 0000:00:1c.4: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.189349] pci 0000:00:1c.4: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.189350] pci 0000:00:1c.4: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 0.189351] pci 0000:00:1c.4: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[ 0.189352] pci 0000:00:1c.4: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[ 0.189353] pci 0000:00:1c.4: bridge window [mem 0xe0000000-0xfeafffff] (subtractive decode)
[ 0.189467] pci 0000:03:00.0: PCI bridge to [bus 04] (subtractive decode)
[ 0.189488] pci 0000:03:00.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.189489] pci 0000:03:00.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.189490] pci 0000:03:00.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.189491] pci 0000:03:00.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 0.189492] pci 0000:03:00.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.189494] pci 0000:03:00.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.189495] pci 0000:03:00.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 0.189496] pci 0000:03:00.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[ 0.189497] pci 0000:03:00.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[ 0.189498] pci 0000:03:00.0: bridge window [mem 0xe0000000-0xfeafffff] (subtractive decode)
[ 0.189588] pci 0000:05:00.0: [1106:0415] type 00 class 0x010185
[ 0.189610] pci 0000:05:00.0: reg 0x10: [io 0xd040-0xd047]
[ 0.189623] pci 0000:05:00.0: reg 0x14: [io 0xd030-0xd033]
[ 0.189636] pci 0000:05:00.0: reg 0x18: [io 0xd020-0xd027]
[ 0.189650] pci 0000:05:00.0: reg 0x1c: [io 0xd010-0xd013]
[ 0.189663] pci 0000:05:00.0: reg 0x20: [io 0xd000-0xd00f]
[ 0.189688] pci 0000:05:00.0: reg 0x30: [mem 0xf7200000-0xf720ffff pref]
[ 0.189764] pci 0000:05:00.0: supports D1 D2
[ 0.189765] pci 0000:05:00.0: PME# supported from D1 D2 D3hot
[ 0.197022] pci 0000:00:1c.5: PCI bridge to [bus 05]
[ 0.197027] pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]
[ 0.197032] pci 0000:00:1c.5: bridge window [mem 0xf7200000-0xf72fffff]
[ 0.197137] pci 0000:06:00.0: [10ec:8168] type 00 class 0x020000
[ 0.197159] pci 0000:06:00.0: reg 0x10: [io 0xc000-0xc0ff]
[ 0.197191] pci 0000:06:00.0: reg 0x18: [mem 0xf2104000-0xf2104fff 64bit pref]
[ 0.197211] pci 0000:06:00.0: reg 0x20: [mem 0xf2100000-0xf2103fff 64bit pref]
[ 0.197317] pci 0000:06:00.0: supports D1 D2
[ 0.197318] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.197353] pci 0000:06:00.0: System wakeup disabled by ACPI
[ 0.205018] pci 0000:00:1c.6: PCI bridge to [bus 06]
[ 0.205023] pci 0000:00:1c.6: bridge window [io 0xc000-0xcfff]
[ 0.205032] pci 0000:00:1c.6: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[ 0.205138] pci 0000:07:00.0: [1b21:1042] type 00 class 0x0c0330
[ 0.205170] pci 0000:07:00.0: reg 0x10: [mem 0xf7100000-0xf7107fff 64bit]
[ 0.205322] pci 0000:07:00.0: PME# supported from D3hot D3cold
[ 0.205353] pci 0000:07:00.0: System wakeup disabled by ACPI
[ 0.213014] pci 0000:00:1c.7: PCI bridge to [bus 07]
[ 0.213022] pci 0000:00:1c.7: bridge window [mem 0xf7100000-0xf71fffff]
[ 0.213069] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[ 0.213451] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.213488] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.213524] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.213559] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 0.213594] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.213629] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 *15)
[ 0.213664] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 *14 15)
[ 0.213699] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.213879] ACPI: Enabled 5 GPEs in block 00 to 3F
[ 0.213946] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.213948] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.213949] vgaarb: loaded
[ 0.213950] vgaarb: bridge control possible 0000:01:00.0
[ 0.213991] PCI: Using ACPI for IRQ routing
[ 0.215351] PCI: pci_cache_line_size set to 64 bytes
[ 0.215402] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[ 0.215404] e820: reserve RAM buffer [mem 0xde950000-0xdfffffff]
[ 0.215405] e820: reserve RAM buffer [mem 0xdf800000-0xdfffffff]
[ 0.215406] e820: reserve RAM buffer [mem 0x11f000000-0x11fffffff]
[ 0.215500] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.215504] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.218521] Switched to clocksource hpet
[ 0.222181] pnp: PnP ACPI init
[ 0.222190] ACPI: bus type PNP registered
[ 0.222264] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.222266] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.222325] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.222327] system 00:01: [io 0x0200-0x020f] has been reserved
[ 0.222328] system 00:01: [io 0xffff] has been reserved
[ 0.222330] system 00:01: [io 0xffff] has been reserved
[ 0.222331] system 00:01: [io 0x0400-0x0453] could not be reserved
[ 0.222332] system 00:01: [io 0x0458-0x047f] has been reserved
[ 0.222334] system 00:01: [io 0x0500-0x057f] has been reserved
[ 0.222335] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.222337] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.222360] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.222397] system 00:03: [io 0x0454-0x0457] has been reserved
[ 0.222399] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.222461] system 00:04: [io 0x0290-0x029f] has been reserved
[ 0.222463] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.222503] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.222504] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.222562] pnp 00:06: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[ 0.222704] pnp 00:07: [dma 0 disabled]
[ 0.222741] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.222920] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.222921] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.222923] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.222924] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.222926] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.222927] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.222928] system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.222930] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.222931] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[ 0.222932] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.222934] system 00:08: [mem 0xe0000000-0xe0000fff] has been reserved
[ 0.222935] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.223019] pnp: PnP ACPI: found 9 devices
[ 0.223020] ACPI: bus type PNP unregistered
[ 0.228977] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.228979] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.228982] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.228984] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
[ 0.228986] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.228996] pci 0000:03:00.0: PCI bridge to [bus 04]
[ 0.229014] pci 0000:00:1c.4: PCI bridge to [bus 03-04]
[ 0.229024] pci 0000:00:1c.5: PCI bridge to [bus 05]
[ 0.229026] pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]
[ 0.229030] pci 0000:00:1c.5: bridge window [mem 0xf7200000-0xf72fffff]
[ 0.229037] pci 0000:00:1c.6: PCI bridge to [bus 06]
[ 0.229039] pci 0000:00:1c.6: bridge window [io 0xc000-0xcfff]
[ 0.229045] pci 0000:00:1c.6: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[ 0.229050] pci 0000:00:1c.7: PCI bridge to [bus 07]
[ 0.229054] pci 0000:00:1c.7: bridge window [mem 0xf7100000-0xf71fffff]
[ 0.229062] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.229063] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.229064] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.229065] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.229066] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.229067] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.229069] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[ 0.229070] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
[ 0.229071] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
[ 0.229072] pci_bus 0000:00: resource 13 [mem 0xe0000000-0xfeafffff]
[ 0.229073] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.229074] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
[ 0.229075] pci_bus 0000:01: resource 2 [mem 0xe8000000-0xf1ffffff 64bit pref]
[ 0.229077] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 0.229078] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 0.229079] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.229080] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.229081] pci_bus 0000:03: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.229082] pci_bus 0000:03: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.229083] pci_bus 0000:03: resource 10 [mem 0x000dc000-0x000dffff]
[ 0.229084] pci_bus 0000:03: resource 11 [mem 0x000e0000-0x000e3fff]
[ 0.229085] pci_bus 0000:03: resource 12 [mem 0x000e4000-0x000e7fff]
[ 0.229086] pci_bus 0000:03: resource 13 [mem 0xe0000000-0xfeafffff]
[ 0.229088] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 0.229089] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 0.229090] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.229091] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.229092] pci_bus 0000:04: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.229093] pci_bus 0000:04: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.229094] pci_bus 0000:04: resource 10 [mem 0x000dc000-0x000dffff]
[ 0.229095] pci_bus 0000:04: resource 11 [mem 0x000e0000-0x000e3fff]
[ 0.229096] pci_bus 0000:04: resource 12 [mem 0x000e4000-0x000e7fff]
[ 0.229097] pci_bus 0000:04: resource 13 [mem 0xe0000000-0xfeafffff]
[ 0.229099] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
[ 0.229100] pci_bus 0000:05: resource 1 [mem 0xf7200000-0xf72fffff]
[ 0.229101] pci_bus 0000:06: resource 0 [io 0xc000-0xcfff]
[ 0.229102] pci_bus 0000:06: resource 2 [mem 0xf2100000-0xf21fffff 64bit pref]
[ 0.229103] pci_bus 0000:07: resource 1 [mem 0xf7100000-0xf71fffff]
[ 0.229146] NET: Registered protocol family 2
[ 0.229321] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.229396] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.229499] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.229516] TCP: reno registered
[ 0.229521] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.229538] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.229593] NET: Registered protocol family 1
[ 0.482419] pci 0000:01:00.0: Video device with shadowed ROM
[ 0.482540] PCI: CLS 64 bytes, default 64
[ 0.482578] Unpacking initramfs...
[ 0.674833] Freeing initrd memory: 14596K (ffff88003636e000 - ffff8800371af000)
[ 0.674852] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.674854] software IO TLB [mem 0xda950000-0xde950000] (64MB) mapped at [ffff8800da950000-ffff8800de94ffff]
[ 0.675063] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[ 0.675099] microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x28
[ 0.675104] microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x28
[ 0.675109] microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x28
[ 0.675113] microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x28
[ 0.675170] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.675380] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.675414] audit: initializing netlink subsys (disabled)
[ 0.675429] audit: type=2000 audit(1452025751.676:1): initialized
[ 0.675755] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.675771] zbud: loaded
[ 0.675914] VFS: Disk quotas dquot_6.5.2
[ 0.675928] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.675971] msgmni has been set to 7853
[ 0.676203] alg: No test for stdrng (krng)
[ 0.676220] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.676260] io scheduler noop registered
[ 0.676262] io scheduler deadline registered
[ 0.676293] io scheduler cfq registered (default)
[ 0.676430] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.676764] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.676776] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.676792] intel_idle: MWAIT substates: 0x1120
[ 0.676793] intel_idle: v0.4 model 0x2A
[ 0.676794] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.676926] GHES: HEST is not enabled!
[ 0.676973] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.697366] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.697793] Linux agpgart interface v0.103
[ 0.697874] i8042: PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12
[ 0.697875] i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1
[ 0.700149] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.700154] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.700285] mousedev: PS/2 mouse device common for all mice
[ 0.700328] rtc_cmos 00:02: RTC can wake from S4
[ 0.700447] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.700472] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.700482] Intel P-state driver initializing.
[ 0.700490] Intel pstate controlling: cpu 0
[ 0.700530] Intel pstate controlling: cpu 1
[ 0.700545] Intel pstate controlling: cpu 2
[ 0.700557] Intel pstate controlling: cpu 3
[ 0.700596] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.701322] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[ 0.701323] AMD IOMMUv2 functionality not available on this system
[ 0.701441] TCP: cubic registered
[ 0.701670] NET: Registered protocol family 10
[ 0.701990] mip6: Mobile IPv6
[ 0.701996] NET: Registered protocol family 17
[ 0.702005] mpls_gso: MPLS GSO support
[ 0.702515] registered taskstats version 1
[ 0.703247] rtc_cmos 00:02: setting system clock to 2016-01-05 20:29:12 UTC (1452025752)
[ 0.703352] PM: Hibernation image not present or could not be loaded.
[ 0.704359] Freeing unused kernel memory: 1204K (ffffffff818ee000 - ffffffff81a1b000)
[ 0.704361] Write protecting the kernel read-only data: 8192k
[ 0.704879] Freeing unused kernel memory: 912K (ffff88000151c000 - ffff880001600000)
[ 0.705573] Freeing unused kernel memory: 212K (ffff8800017cb000 - ffff880001800000)
[ 0.717413] systemd-udevd[72]: starting version 215
[ 0.717752] random: systemd-udevd urandom read with 1 bits of entropy available
[ 0.731919] ACPI: Fan [FAN0] (off)
[ 0.731973] ACPI: Fan [FAN1] (off)
[ 0.732016] ACPI: Fan [FAN2] (off)
[ 0.734391] ACPI: bus type USB registered
[ 0.734426] usbcore: registered new interface driver usbfs
[ 0.734439] usbcore: registered new interface driver hub
[ 0.734802] SCSI subsystem initialized
[ 0.736177] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.736188] r8169 0000:06:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 0.736229] usbcore: registered new device driver usb
[ 0.736236] libata version 3.00 loaded.
[ 0.736551] pata_via 0000:05:00.0: version 0.3.4
[ 0.736854] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.736927] ata_piix 0000:00:1f.2: version 2.13
[ 0.737066] ehci-pci: EHCI PCI platform driver
[ 0.758525] r8169 0000:06:00.0: irq 41 for MSI/MSI-X
[ 0.758548] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.758578] xhci_hcd 0000:07:00.0: xHCI Host Controller
[ 0.758587] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 1
[ 0.758735] r8169 0000:06:00.0 eth0: RTL8168e/8111e at 0xffffc90000678000, 54:04:a6:7e:fa:f4, XID 0c200000 IRQ 41
[ 0.758738] r8169 0000:06:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 0.763026] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.763029] ACPI: Thermal Zone [TZ00] (28 C)
[ 0.763255] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.763256] ACPI: Thermal Zone [TZ01] (30 C)
[ 0.763325] ACPI: Fan [FAN3] (off)
[ 0.763365] ACPI: Fan [FAN4] (off)
[ 0.768285] xhci_hcd 0000:07:00.0: irq 42 for MSI/MSI-X
[ 0.768289] xhci_hcd 0000:07:00.0: irq 43 for MSI/MSI-X
[ 0.768293] xhci_hcd 0000:07:00.0: irq 44 for MSI/MSI-X
[ 0.768297] xhci_hcd 0000:07:00.0: irq 45 for MSI/MSI-X
[ 0.768300] xhci_hcd 0000:07:00.0: irq 46 for MSI/MSI-X
[ 0.768427] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.768429] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.768431] usb usb1: Product: xHCI Host Controller
[ 0.768433] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
[ 0.768434] usb usb1: SerialNumber: 0000:07:00.0
[ 0.768562] scsi0 : pata_via
[ 0.768576] hub 1-0:1.0: USB hub found
[ 0.768588] hub 1-0:1.0: 2 ports detected
[ 0.768706] xhci_hcd 0000:07:00.0: xHCI Host Controller
[ 0.768709] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 2
[ 0.768732] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.768751] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.768753] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.768754] usb usb2: Product: xHCI Host Controller
[ 0.768756] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
[ 0.768758] usb usb2: SerialNumber: 0000:07:00.0
[ 0.768855] hub 2-0:1.0: USB hub found
[ 0.768864] hub 2-0:1.0: 2 ports detected
[ 0.769387] scsi1 : pata_via
[ 0.769438] ata1: PATA max UDMA/133 cmd 0xd040 ctl 0xd030 bmdma 0xd000 irq 17
[ 0.769440] ata2: PATA max UDMA/133 cmd 0xd020 ctl 0xd010 bmdma 0xd008 irq 17
[ 0.913970] ata_piix 0000:00:1f.2: SCR access via SIDPR is available but doesn't work
[ 0.914768] scsi2 : ata_piix
[ 0.915196] scsi3 : ata_piix
[ 0.915287] ata3: SATA max UDMA/133 cmd 0xf0d0 ctl 0xf0c0 bmdma 0xf090 irq 19
[ 0.915290] ata4: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf098 irq 19
[ 0.915415] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 1.069896] ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
[ 1.070307] scsi4 : ata_piix
[ 1.070408] scsi5 : ata_piix
[ 1.070465] ata5: SATA max UDMA/133 cmd 0xf070 ctl 0xf060 bmdma 0xf030 irq 19
[ 1.070467] ata6: SATA max UDMA/133 cmd 0xf050 ctl 0xf040 bmdma 0xf038 irq 19
[ 1.070636] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.070646] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.070662] ehci-pci 0000:00:1a.0: debug port 2
[ 1.074562] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.074580] ehci-pci 0000:00:1a.0: irq 23, io mem 0xf7307000
[ 1.085850] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.085901] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.085904] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.085906] usb usb3: Product: EHCI Host Controller
[ 1.085909] usb usb3: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[ 1.085911] usb usb3: SerialNumber: 0000:00:1a.0
[ 1.086139] hub 3-0:1.0: USB hub found
[ 1.086148] hub 3-0:1.0: 2 ports detected
[ 1.086419] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.086426] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 1.086439] ehci-pci 0000:00:1d.0: debug port 2
[ 1.090327] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.090334] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7306000
[ 1.101856] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.101907] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.101910] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.101912] usb usb4: Product: EHCI Host Controller
[ 1.101914] usb usb4: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[ 1.101916] usb usb4: SerialNumber: 0000:00:1d.0
[ 1.102137] hub 4-0:1.0: USB hub found
[ 1.102146] hub 4-0:1.0: 2 ports detected
[ 1.102429] ata3.01: ATA-8: SAMSUNG HD502HJ, 1AJ100E4, max UDMA/133
[ 1.102433] ata3.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.110274] ata4.00: ATAPI: ASUS DRW-24B5ST, 1.00, max UDMA/100
[ 1.110370] ata3.01: configured for UDMA/133
[ 1.110429] ata4.01: ATA-7: SAMSUNG HD322HJ, 1AC01113, max UDMA7
[ 1.110434] ata4.01: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.110705] scsi 2:0:1:0: Direct-Access ATA SAMSUNG HD502HJ 00E4 PQ: 0 ANSI: 5
[ 1.112770] sd 2:0:1:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.112883] sd 2:0:1:0: [sda] Write Protect is off
[ 1.112887] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 1.112928] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.126022] ata4.00: configured for UDMA/100
[ 1.134167] ata4.01: configured for UDMA/133
[ 1.136331] scsi 3:0:0:0: CD-ROM ASUS DRW-24B5ST 1.00 PQ: 0 ANSI: 5
[ 1.143880] sda: sda1 sda2 < sda5 sda6 >
[ 1.145014] sd 2:0:1:0: [sda] Attached SCSI disk
[ 1.146192] scsi 3:0:1:0: Direct-Access ATA SAMSUNG HD322HJ 1113 PQ: 0 ANSI: 5
[ 1.146599] sd 3:0:1:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.146815] sd 3:0:1:0: [sdb] Write Protect is off
[ 1.146819] sd 3:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.146841] sd 3:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.147338] sd 2:0:1:0: Attached scsi generic sg0 type 0
[ 1.147384] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 1.147425] sd 3:0:1:0: Attached scsi generic sg2 type 0
[ 1.156645] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.156649] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.156803] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 1.158333] sdb: sdb1
[ 1.221457] sd 3:0:1:0: [sdb] Attached SCSI disk
[ 1.397590] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 1.517930] PM: Starting manual resume from disk
[ 1.517936] PM: Hibernation image partition 8:5 present
[ 1.517938] PM: Looking for hibernation image.
[ 1.518162] PM: Image not found (code -22)
[ 1.518165] PM: Hibernation image not present or could not be loaded.
[ 1.529761] usb 3-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.529766] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.530049] hub 3-1:1.0: USB hub found
[ 1.530113] hub 3-1:1.0: 6 ports detected
[ 1.635781] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 1.641385] usb 4-1: new high-speed USB device number 2 using ehci-pci
[ 1.673371] tsc: Refined TSC clocksource calibration: 3311.144 MHz
[ 1.773756] usb 4-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.773760] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.774174] hub 4-1:1.0: USB hub found
[ 1.774364] hub 4-1:1.0: 8 ports detected
[ 1.845186] usb 3-1.6: new high-speed USB device number 3 using ehci-pci
[ 1.940098] usb 3-1.6: New USB device found, idVendor=058f, idProduct=6362
[ 1.940103] usb 3-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.940113] usb 3-1.6: Product: Mass Storage Device
[ 1.940115] usb 3-1.6: Manufacturer: Generic
[ 1.940117] usb 3-1.6: SerialNumber: 058F312D81B
[ 2.045049] usb 4-1.6: new low-speed USB device number 3 using ehci-pci
[ 2.146059] usb 4-1.6: New USB device found, idVendor=0518, idProduct=0001
[ 2.146064] usb 4-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.146066] usb 4-1.6: Product: USB-compliant keyboard
[ 2.146068] usb 4-1.6: Manufacturer: Plus More Enterprise LTD.
[ 2.463904] random: nonblocking pool is initialized
[ 2.672733] Switched to clocksource tsc
[ 3.543559] lp: driver loaded but no devices found
[ 3.554813] systemd-udevd[184]: starting version 215
[ 3.646433] ppdev: user-space parallel port driver
[ 3.712735] fuse init (API version 7.23)
[ 4.543095] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 4.663712] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 4.663717] ACPI: Power Button [PWRB]
[ 4.663762] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 4.663764] ACPI: Power Button [PWRF]
[ 4.696838] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20140424/utaddress-254)
[ 4.696844] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.696846] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-254)
[ 4.696849] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB_.PCI0.LPCB.GPBX) (20140424/utaddress-254)
[ 4.696852] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.696853] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-254)
[ 4.696855] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB_.PCI0.LPCB.GPBX) (20140424/utaddress-254)
[ 4.696858] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.696859] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-254)
[ 4.696861] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB_.PCI0.LPCB.GPBX) (20140424/utaddress-254)
[ 4.696863] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000050F (\_GPE.GPIO) (20140424/utaddress-254)
[ 4.696866] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.696867] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 4.712227] wmi: Mapper loaded
[ 4.732899] ACPI Warning: SystemIO range 0x000000000000F000-0x000000000000F01F conflicts with OpRegion 0x000000000000F000-0x000000000000F00F (\_SB_.PCI0.SBUS.SMBI) (20140424/utaddress-254)
[ 4.732903] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.756010] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 4.858283] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 4.895356] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[ 4.895425] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 4.895430] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
[ 5.010518] sound hdaudioC0D0: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 5.010521] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 5.010522] sound hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 5.010523] sound hdaudioC0D0: mono: mono_out=0x0
[ 5.010524] sound hdaudioC0D0: dig-out=0x11/0x1e
[ 5.010525] sound hdaudioC0D0: inputs:
[ 5.010527] sound hdaudioC0D0: Front Mic=0x19
[ 5.010528] sound hdaudioC0D0: Rear Mic=0x18
[ 5.010529] sound hdaudioC0D0: Line=0x1a
[ 5.022600] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 5.022626] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 5.022651] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 5.022674] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 5.022697] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 5.022720] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 5.022741] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 5.022762] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 5.087477] asus_wmi: ASUS WMI generic driver loaded
[ 5.144566] mei_me 0000:00:16.0: irq 48 for MSI/MSI-X
[ 5.221973] [drm] Initialized drm 1.1.0 20060810
[ 5.336634] iTCO_vendor_support: vendor-support=0
[ 5.361475] asus_wmi: Initialization: 0x0
[ 5.361495] asus_wmi: BIOS WMI version: 0.9
[ 5.361527] asus_wmi: SFUN value: 0x0
[ 5.361763] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input14
[ 5.362334] asus_wmi: Disabling ACPI video driver
[ 5.463028] AVX version of gcm_enc/dec engaged.
[ 5.464638] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 5.518653] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
[ 5.519277] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
[ 5.557682] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0d90a0a1
[ 5.557687] nouveau [ DEVICE][0000:01:00.0] Chipset: GF119 (NVD9)
[ 5.557689] nouveau [ DEVICE][0000:01:00.0] Family : NVD0
[ 5.557721] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image...
[ 5.633671] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid
[ 5.633673] nouveau [ VBIOS][0000:01:00.0] using image from PRAMIN
[ 5.633781] nouveau [ VBIOS][0000:01:00.0] BIT signature found
[ 5.633783] nouveau [ VBIOS][0000:01:00.0] version 75.19.55.00.02
[ 5.634214] nouveau 0000:01:00.0: irq 49 for MSI/MSI-X
[ 5.634222] nouveau [ PMC][0000:01:00.0] MSI interrupts enabled
[ 5.634261] nouveau W[ PFB][0000:01:00.0][0x00000000][ffff88011918a800] reclocking of this ram type unsupported
[ 5.634264] nouveau [ PFB][0000:01:00.0] RAM type: DDR3
[ 5.634265] nouveau [ PFB][0000:01:00.0] RAM size: 2048 MiB
[ 5.634267] nouveau [ PFB][0000:01:00.0] ZCOMP: 0 tags
[ 5.636133] nouveau [ VOLT][0000:01:00.0] GPU voltage: 900000uv
[ 5.647494] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 5.647522] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[ 5.648909] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 5.665412] nouveau [ PTHERM][0000:01:00.0] FAN control: none / external
[ 5.665420] nouveau [ PTHERM][0000:01:00.0] fan management: automatic
[ 5.665431] nouveau [ PTHERM][0000:01:00.0] internal sensor: yes
[ 5.665461] nouveau [ CLK][0000:01:00.0] 07: core 270 MHz memory 405 MHz
[ 5.665464] nouveau [ CLK][0000:01:00.0] 0f: core 810 MHz memory 600 MHz
[ 5.665623] nouveau [ CLK][0000:01:00.0] --: core 270 MHz memory 405 MHz
[ 5.669361] [TTM] Zone kernel: Available graphics memory: 2011604 kiB
[ 5.669363] [TTM] Initializing pool allocator
[ 5.669368] [TTM] Initializing DMA pool allocator
[ 5.669385] nouveau [ DRM] VRAM: 2048 MiB
[ 5.669386] nouveau [ DRM] GART: 1048576 MiB
[ 5.669390] nouveau [ DRM] TMDS table version 2.0
[ 5.669391] nouveau [ DRM] DCB version 4.0
[ 5.669393] nouveau [ DRM] DCB outp 00: 02000300 00000000
[ 5.669395] nouveau [ DRM] DCB outp 01: 01000302 00020030
[ 5.669396] nouveau [ DRM] DCB outp 02: 02011362 00020010
[ 5.669397] nouveau [ DRM] DCB outp 03: 04022310 00000000
[ 5.669399] nouveau [ DRM] DCB conn 00: 00001030
[ 5.669401] nouveau [ DRM] DCB conn 01: 00002161
[ 5.669402] nouveau [ DRM] DCB conn 02: 00000200
[ 5.670242] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 5.670243] [drm] Driver supports precise vblank timestamp query.
[ 5.676404] nouveau [ DRM] MM: using COPY0 for buffer copies
[ 5.750199] input: ImExPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input4
[ 5.790867] nouveau [ DRM] allocated 2560x1440 fb: 0x60000, bo ffff8800d76bd800
[ 5.790943] fbcon: nouveaufb (fb0) is primary device
[ 5.866110] Console: switching to colour frame buffer device 320x90
[ 5.872834] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[ 5.872836] nouveau 0000:01:00.0: registered panic notifier
[ 5.893808] [drm] Initialized nouveau 1.1.2 20120801 for 0000:01:00.0 on minor 0
[ 6.124135] alg: No test for crc32 (crc32-pclmul)
[ 6.192795] kvm: disabled by bios
[ 6.206821] kvm: disabled by bios
[ 6.230337] kvm: disabled by bios
[ 6.345461] Adding 8314876k swap on /dev/sda5. Priority:-1 extents:1 across:8314876k FS
[ 6.351855] intel_rapl: Found RAPL domain package
[ 6.351873] intel_rapl: Found RAPL domain core
[ 6.373687] hidraw: raw HID events driver (C) Jiri Kosina
[ 6.412795] usbcore: registered new interface driver usbhid
[ 6.412797] usbhid: USB HID core driver
[ 6.424946] input: Plus More Enterprise LTD. USB-compliant keyboard as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.6/4-1.6:1.0/0003:0518:0001.0001/input/input17
[ 6.425058] hid-generic 0003:0518:0001.0001: input,hidraw0: USB HID v1.10 Keyboard [Plus More Enterprise LTD. USB-compliant keyboard] on usb-0000:00:1d.0-1.6/input0
[ 6.425230] input: Plus More Enterprise LTD. USB-compliant keyboard as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.6/4-1.6:1.1/0003:0518:0001.0002/input/input18
[ 6.425395] hid-generic 0003:0518:0001.0002: input,hidraw1: USB HID v1.10 Mouse [Plus More Enterprise LTD. USB-compliant keyboard] on usb-0000:00:1d.0-1.6/input1
[ 6.464593] usb-storage 3-1.6:1.0: USB Mass Storage device detected
[ 6.464757] scsi6 : usb-storage 3-1.6:1.0
[ 6.464850] usbcore: registered new interface driver usb-storage
[ 6.665559] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 6.774179] systemd-journald[195]: Received request to flush runtime journal from PID 1
[ 7.461511] scsi 6:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 7.462138] scsi 6:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 7.462742] scsi 6:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[ 7.463343] scsi 6:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 7.463724] sd 6:0:0:0: Attached scsi generic sg3 type 0
[ 7.464020] sd 6:0:0:1: Attached scsi generic sg4 type 0
[ 7.467470] sd 6:0:0:2: Attached scsi generic sg5 type 0
[ 7.468707] sd 6:0:0:3: Attached scsi generic sg6 type 0
[ 7.469892] sd 6:0:0:2: [sde] Attached SCSI removable disk
[ 7.499125] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[ 7.499892] sd 6:0:0:1: [sdd] Attached SCSI removable disk
[ 7.501394] sd 6:0:0:3: [sdf] Attached SCSI removable disk
[ 7.649756] RPC: Registered named UNIX socket transport module.
[ 7.649759] RPC: Registered udp transport module.
[ 7.649768] RPC: Registered tcp transport module.
[ 7.649770] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 7.667807] FS-Cache: Loaded
[ 7.684131] FS-Cache: Netfs 'nfs' registered for caching
[ 7.729417] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 10.796261] cfg80211: Calling CRDA to update world regulatory domain
[ 11.248582] r8169 0000:06:00.0: firmware: direct-loading firmware rtl_nic/rtl8168e-2.fw
[ 11.389036] r8169 0000:06:00.0 eth0: link down
[ 11.389077] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 11.389123] r8169 0000:06:00.0 eth0: link down
[ 11.623546] cfg80211: World regulatory domain updated:
[ 11.623550] cfg80211: DFS Master region: unset
[ 11.623552] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 11.623556] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 11.623558] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 11.623560] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 11.623563] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 11.623566] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 11.623568] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 11.623570] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 11.623572] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 13.712639] r8169 0000:06:00.0 eth0: link up
[ 13.712650] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 3161.700067] usb 1-1: new full-speed USB device number 2 using xhci_hcd
[ 3161.887562] usb 1-1: New USB device found, idVendor=0fcf, idProduct=1008
[ 3161.887572] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3161.887575] usb 1-1: Product: ANT USBStick2
[ 3161.887577] usb 1-1: Manufacturer: Dynastream Innovations
[ 3161.887579] usb 1-1: SerialNumber: 167
[ 3162.989818] usbcore: registered new interface driver usbserial
[ 3162.989836] usbcore: registered new interface driver usbserial_generic
[ 3162.989850] usbserial: USB Serial support registered for generic
[ 3163.002019] usbcore: registered new interface driver usb_serial_simple
[ 3163.002037] usbserial: USB Serial support registered for zio
[ 3163.002050] usbserial: USB Serial support registered for funsoft
[ 3163.002066] usbserial: USB Serial support registered for flashloader
[ 3163.002078] usbserial: USB Serial support registered for google
[ 3163.002090] usbserial: USB Serial support registered for vivopay
[ 3163.002104] usbserial: USB Serial support registered for moto_modem
[ 3163.002122] usbserial: USB Serial support registered for hp4x
[ 3163.002135] usbserial: USB Serial support registered for suunto
[ 3163.002150] usbserial: USB Serial support registered for siemens_mpi
[ 3163.002168] usb_serial_simple 1-1:1.0: suunto converter detected
[ 3163.002405] usb 1-1: suunto converter now attached to ttyUSB0
Bonne soirée
Edit à toto :
Mise des retours commande en balise code simple et non en =user. Bonne soirée à toi aussi.
Dernière modification par stf31 (06-01-2016 20:04:51)
Hors ligne
Ensuite, j'ai créer le fichier suivant: /etc/udev/rules.d/99-garmin.rules dans lequel j'ai noté :
Après, il est nécessaire de décharger les modules USB du noyau.
Pour lancer la récupération des fichiers tcx :
Pour ma part, j'ai choisi de faire un script shell associé à un lanceur pour faciliter l'exécution de ces commandes.
A noter que l'on peut modifier le fichier
au niveau de la ligne 8 pour indiquer le répertoire d'enregistrement du fichier tcx.
Edit à toto :
Séparation des commandes root et mise des balises Autre code pour les indications d'écriture.
Hors ligne
saque eud dun (patois chtimi : fonce dedans)
Hors ligne