ça y est !! je viens d'installer info4forum !! je ne sais pas pourquoi, mais j'avais mon CD d'installation dans la source-list .... c'est ce qui bloquait l'installation; donc ça donne ça:
Informations sur compaq
Cette page vous permettra de transmettre des informations à propos de votre système Debian GNU/Linux pour obtenir de l'aide sur les forums : le texte sera pré-formaté, il vous suffit de "copier" grâce au bouton en bas de fenêtre puis de "coller" sur le forum.
Vous pouvez éditer les informations afin de supprimer les sections inutiles comme ce paragraphe ☺ .
------------------------------------------
Votre Debian :
Version installée : 8.5
Noyau actif : Linux 3.16.0-4-686-pae
------------------------------------------
lspci - liste des périphériques internes :
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
00:1f.6 Signal processing controller: Intel Corporation 82801I (ICH9 Family) Thermal Subsystem (rev 03)
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
02:00.0 Ethernet controller: Qualcomm Atheros AR242x / AR542x Wireless Network Adapter (PCI-Express) (rev 01)
------------------------------------------
lsusb - liste des périphériques connectés :
Bus 004 Device 003: ID 13fe:4200 Kingston Technology Company Inc.
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 002: ID 046d:c050 Logitech, Inc. RX 250 Optical Mouse
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 003: ID 04f2:b091 Chicony Electronics Co., Ltd Webcam
Bus 003 Device 002: ID 0bda:0158 Realtek Semiconductor Corp. USB 2.0 multicard reader
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
------------------------------------------
Informations sur votre matériel :
BIOS Information
Vendor: Hewlett-Packard
Version: F.25
Release Date: 09/04/2008
ROM Size: 2048 kB
Characteristics:
PCI is supported
BIOS is upgradeable
BIOS shadowing is allowed
Boot from CD is supported
Selectable boot is supported
BIOS ROM is socketed
EDD is supported
Japanese floppy for NEC 9800 1.2 MB is supported (int 13h)
Japanese floppy for Toshiba 1.2 MB is supported (int 13h)
5.25"/360 kB floppy services are supported (int 13h)
5.25"/1.2 MB floppy services are supported (int 13h)
3.5"/720 kB floppy services are supported (int 13h)
3.5"/2.88 MB floppy services are supported (int 13h)
8042 keyboard services are supported (int 9h)
CGA/mono video services are supported (int 10h)
ACPI is supported
USB legacy is supported
Targeted content distribution is supported
System Information
Manufacturer: Hewlett-Packard
Product Name: Compaq Presario CQ60 Notebook PC
Version: F.25
Serial Number: 2CE8393RRF
UUID: 78563412-3412-7856-90AB-CDDEEFAABBCC
Wake-up Type: Power Switch
SKU Number: FW804EA#ABF
Family: 103C_5335KV
System Configuration Options
Option 1: String1 for Type12 Equipment Manufacturer
Option 2: String2 for Type12 Equipment Manufacturer
Option 3: String3 for Type12 Equipment Manufacturer
Option 4: String4 for Type12 Equipment Manufacturer
System Event Log
Area Length: 32672 bytes
Header Start Offset: 0x0000
Data Start Offset: 0x0000
Access Method: General-purpose non-volatile data functions
Access Address: 0x0000
Status: Valid, Not Full
Change Token: 0x12345678
Header Format: OEM-specific
Supported Log Type Descriptors: 3
Descriptor 1: POST memory resize
Data Format 1: None
Descriptor 2: POST error
Data Format 2: POST results bitmap
Descriptor 3: Log area reset/cleared
Data Format 3: None
System Boot Information
Status: No errors detected
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 8 GB
Number Of Devices: 2
Memory Device
Total Width: 64 bits
Data Width: 64 bits
Size: 2048 MB
Form Factor: SODIMM
Set: None
Locator: DIMM0
Bank Locator: BANK 0
Type: DDR2
Type Detail: Synchronous
Speed: 667 MHz
Manufacturer: Micron
Serial Number: E7163E20
Asset Tag: Unknown
Part Number: 16HTF25664HY-667E1
Memory Device
Total Width: 64 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: SODIMM
Set: None
Locator: DIMM2
Bank Locator: BANK 2
Type: DDR2
Type Detail: Synchronous
Speed: 667 MHz
Manufacturer: 7F7F7F7FCB000000
Serial Number: 00000000
Asset Tag: Unknown
Part Number: DOVE1A0834E
Processor Information
Socket Designation: CPU
Type: Central Processor
Family: Pentium M
Manufacturer: Intel(R) Corporation
ID: FD 06 00 00 FF FB EB BF
Signature: Type 0, Family 6, Model 15, Stepping 13
Flags:
FPU (Floating-point unit on-chip)
VME (Virtual mode extension)
DE (Debugging extension)
PSE (Page size extension)
TSC (Time stamp counter)
MSR (Model specific registers)
PAE (Physical address extension)
MCE (Machine check exception)
CX8 (CMPXCHG8 instruction supported)
APIC (On-chip APIC hardware supported)
SEP (Fast system call)
MTRR (Memory type range registers)
PGE (Page global enable)
MCA (Machine check architecture)
CMOV (Conditional move instruction supported)
PAT (Page attribute table)
PSE-36 (36-bit page size extension)
CLFSH (CLFLUSH instruction supported)
DS (Debug store)
ACPI (ACPI supported)
MMX (MMX technology supported)
FXSR (FXSAVE and FXSTOR instructions supported)
SSE (Streaming SIMD extensions)
SSE2 (Streaming SIMD extensions 2)
SS (Self-snoop)
HTT (Multi-threading)
TM (Thermal monitor supported)
PBE (Pending break enabled)
Version: Intel(R) Core(TM)2 Duo CPU T5800 @ 2.00GHz
Voltage: 1.6 V
External Clock: 800 MHz
Max Speed: 2000 MHz
Current Speed: 1200 MHz
Status: Populated, Enabled
Upgrade: <OUT OF SPEC>
Serial Number: Not Specified
Asset Tag: FFFF
Part Number: Not Specified
------------------------------------------
Informations affichage :
Screen 0: minimum 320 x 200, current 1366 x 768, maximum 8192 x 8192
LVDS1 connected primary 1366x768+0+0 (normal left inverted right x axis y axis) 344mm x 193mm
1366x768 60.11*+
1360x768 59.80 59.96
1024x768 60.00
800x600 60.32 56.25
640x480 59.94
VGA1 disconnected (normal left inverted right x axis y axis)
HDMI1 disconnected (normal left inverted right x axis y axis)
DP1 disconnected (normal left inverted right x axis y axis)
DP2 disconnected (normal left inverted right x axis y axis)
TV1 disconnected (normal left inverted right x axis y axis)
------------------------------------------
Utilisation des systèmes de fichiers :
Sys. de fichiers Taille Utilisé Dispo Uti% Monté sur
/dev/sda1 224G 22G 190G 11% /
udev 10M 0 10M 0% /dev
tmpfs 595M 8,5M 586M 2% /run
tmpfs 1,5G 260K 1,5G 1% /dev/shm
tmpfs 5,0M 4,0K 5,0M 1% /run/lock
tmpfs 1,5G 0 1,5G 0% /sys/fs/cgroup
tmpfs 298M 8,0K 298M 1% /run/user/119
tmpfs 298M 28K 298M 1% /run/user/1000
/dev/sdc1 647M 647M 0 100% /media/ariane/Debian 8.5.0 i386 1
------------------------------------------
Partitionnement des disques durs :
Disque /dev/sda : 232,9 GiB, 250059350016 octets, 488397168 secteurs
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Type d'étiquette de disque : dos
Identifiant de disque : 0x630b388f
Device Boot Start End Sectors Size Id Type
/dev/sda1 * 2048 476096511 476094464 227G 83 Linux
/dev/sda2 476098558 488396799 12298242 5,9G 5 Extended
/dev/sda5 476098560 488396799 12298240 5,9G 82 Linux swap / Solaris
Disque /dev/sdc : 3,8 GiB, 4009754624 octets, 7831552 secteurs
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Type d'étiquette de disque : dos
Identifiant de disque : 0x63311758
Device Boot Start End Sectors Size Id Type
/dev/sdc1 * 0 1325055 1325056 647M 0 Empty
/dev/sdc2 8396 9003 608 304K ef EFI (FAT-12/16/32)
------------------------------------------
Informations sur votre réseau :
----network/interfaces :
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
source /etc/network/interfaces.d/*
# The loopback network interface
auto lo
iface lo inet loopback
----resolv.conf :
nameserver fe80::924d:4aff:feaa:29d0%wlan0
----ifconfig :
eth0 Link encap:Ethernet HWaddr 00:1f:16:42:aa:95
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
lo Link encap:Boucle locale
inet adr:127.0.0.1 Masque:255.0.0.0
adr inet6: ::1/128 Scope:Hôte
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:774 errors:0 dropped:0 overruns:0 frame:0
TX packets:774 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:0
RX bytes:64290 (62.7 KiB) TX bytes:64290 (62.7 KiB)
wlan0 Link encap:Ethernet HWaddr 00:23:4d:78:e7:cf
inet adr:192.168.1.26 Bcast:192.168.1.255 Masque:255.255.255.0
adr inet6: 2a01:cb10:86d8:fe00:65c3:9101:bf21:b2a8/64 Scope:Global
adr inet6: 2a01:cb10:86d8:fe00:223:4dff:fe78:e7cf/64 Scope:Global
adr inet6: fe80::223:4dff:fe78:e7cf/64 Scope:Lien
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:39309 errors:0 dropped:0 overruns:0 frame:0
TX packets:29183 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
RX bytes:31174671 (29.7 MiB) TX bytes:4206886 (4.0 MiB)
----route :
Table de routage IP du noyau
Destination Passerelle Genmask Indic Metric Ref Use Iface
0.0.0.0 192.168.1.1 0.0.0.0 UG 1024 0 0 wlan0
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 wlan0
------------------------------------------
Vos sources de logiciels :
/etc/apt/sources.list:
# deb cdrom:[Debian GNU/Linux 8.5.0 _Jessie_ - Official i386 CD Binary-1 20160604-14:09]/ jessie main
# deb cdrom:[Debian GNU/Linux 8.5.0 _Jessie_ - Official i386 CD Binary-1 20160604-14:09]/ jessie main
deb http://ftp.fr.debian.org/debian/ jessie main
deb-src http://ftp.fr.debian.org/debian/ jessie main
deb http://security.debian.org/ jessie/updates main
deb-src http://security.debian.org/ jessie/updates main
# jessie-updates, previously known as 'volatile'
deb http://ftp.fr.debian.org/debian/ jessie-updates main
deb-src http://ftp.fr.debian.org/debian/ jessie-updates main
------------------------------------------
-- Fin du rapport info4forum --
Edit à toto :
Tout mis sous balise Autre code (code) pour faciliter la lecture. Nota : les balises Commande user ne serve qu'à indiquer une commande, pas son retour qui se fait à part.