bonjour .
je viens de retrouver un vieux post sur hplip version debian et version hp
entre autres choses j'ai retrouvé 2 vieilles commandes
alain@debian:~$ hp-levels
HP Linux Imaging and Printing System (ver. 3.14.6)
Supply Levels Utility ver. 2.0
Copyright (c) 2001-13 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Using device: hp:/usb/ENVY_5530_series?serial=CN595530XD06BX
Tri-color cartridge
Part No.: 301XL
Health: Good/OK
----------------------------------------------------------------
|//////////////////////////////// | (approx. 50%)
----------------------------------------------------------------
Black cartridge
Part No.: 301XL
Health: Good/OK
----------------------------------------------------------------
|/////////////////////////////////////////////////// | (approx. 80%)
----------------------------------------------------------------
Done.
alain@debian:~$
de ce côté là pas de problème
mais du côté de hp-check ....
Saving output in log file: /home/alain/hp-check.log
HP Linux Imaging and Printing System (ver. 3.14.6)
Dependency/Version Check Utility ver. 15.1
Copyright (c) 2001-13 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode
will check both of the above cases (both compile- and run-time dependencies).
Check types:
a. EXTERNALDEP - External Dependencies
b. GENERALDEP - General Dependencies (required both at compile and run time)
c. COMPILEDEP - Compile time Dependencies
d. [All are run-time checks]
PYEXT SCANCONF QUEUES PERMISSION
Status Types:
OK
MISSING - Missing Dependency or Permission or Plug-in
INCOMPAT - Incompatible dependency-version or Plugin-version
warning: debian-8.6 version is not supported. Using debian-7.5 versions dependencies to verify and install...
---------------
| SYSTEM INFO |
---------------
Kernel: 3.16.0-4-amd64 #1 SMP Debian 3.16.36-1+deb8u2 (2016-10-19) GNU/Linux
Host: debian
Proc: 3.16.0-4-amd64 #1 SMP Debian 3.16.36-1+deb8u2 (2016-10-19) GNU/Linux
Distribution: debian 8.6
Bitness: 64 bit
-----------------------
| HPLIP CONFIGURATION |
-----------------------
HPLIP-Version: HPLIP 3.14.6
HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for debian distro 8.6 version
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.14.6
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hplip/HP
ppdbase=/usr/share/ppd/hplip
doc=/usr/share/doc/hplip-doc/HTML
html=/usr/share/doc/hplip-3.14.6
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv
bin=/usr/bin
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=yes
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.14.6
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=yes
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
Current contents of '/var/lib/hp/hplip.state' file:
Plugins are not installed. Could not access file: Aucun fichier ou dossier de ce type
Current contents of '~/.hplip/hplip.conf' file:
[installation]
date_time = 01/11/2016 17:22:41
version = 3.14.6
[last_used]
device_uri = hp:/usb/ENVY_5530_series?serial=CN595530XD06BX
<Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment>
--------------------------
| External Dependencies |
--------------------------
policykit Admin-Policy-framework OPTIONAL - 0.105 OK -
gs Ghostscript REQUIRED 7.05 9.06 OK -
network Network-wget OPTIONAL - 1.16 OK -
scanimage Shell-Scanning OPTIONAL 1.0 1.0.24 OK -
avahi-utils avahi-utils OPTIONAL - 0.6.31 OK -
dbus DBus REQUIRED - 1.8.20 OK -
cups CUPS REQUIRED 1.1 1.7.5 OK 'CUPS Scheduler is running'
xsane SANE-GUI OPTIONAL 0.9 0.998 OK -
-------------------------
| General Dependencies |
-------------------------
error: reportlab Python-PDF-Lib OPTIONAL 2.0 3.1.8 MISSING 'reportlab needs to be installed'
libcrypto OpenSSL-Crypto-Lib REQUIRED - 1.0.1 OK -
pil Python-Image-Lib OPTIONAL - 1.1.7 OK -
pyqt4-dbus PyQt4-DBUS REQUIRED 4.0 4.11.2 OK -
libjpeg JPEG-Lib REQUIRED - - OK -
libpthread POSIX-Threads-Lib REQUIRED - 2.19 OK -
python-dbus Python-DBUS REQUIRED 0.80.0 1.2.0 OK -
python-devel Python-SDK REQUIRED 2.2 2.7.9 OK -
pyqt4 Python-Qt4 REQUIRED 4.0 4.11.2 OK -
cups-devel CUPS-SDK REQUIRED - 1.7.5 OK -
sane-devel SANE-SDK REQUIRED - 1.0.24 OK -
libusb USB-Lib REQUIRED - 1.0 OK -
sane Scan-Lib REQUIRED - 1.0.24 OK -
cups-image CUPS-Image-Lib REQUIRED - 1.7.5 OK -
libnetsnmp-devel SNMP-Networking-SDK REQUIRED 5.0.9 5.7.2 OK -
python-xml Python-XML-Lib REQUIRED - 2.1.0 OK -
python-notify Desktop-notifications OPTIONAL - - OK -
------------------------------
| Compile Time Dependencies |
------------------------------
gcc gcc-Compiler REQUIRED - 4.9.2 OK -
libtool Build-tools REQUIRED - 2.4.2 OK -
make GNU-Build-tools REQUIRED 3.0 4.0 OK -
----------------------
| Python Extentions |
----------------------
cupsext CUPS-Extension REQUIRED - 3.14.6 OK -
pcardext PhotoCard-Extension REQUIRED - 3.14.6 OK -
hpmudext IO-Extension REQUIRED - 3.14.6 OK -
-----------------------
| Scan Configuration |
-----------------------
hpaio HPLIP-SANE-Backend REQUIRED - 3.14.6 OK 'hpaio found in /etc/sane.d/dll.conf'
scanext Scan-SANE-Extension REQUIRED - 3.14.6 OK -
------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------
device `hpaio:/usb/ENVY_5530_series?serial=CN595530XD06BX' is a Hewlett-Packard ENVY_5530_series all-in-one
device `v4l:/dev/video1' is a Noname Hauppauge WinTV-HVR1120 DVB-T/H virtual device
--------------------------
| DISCOVERED USB DEVICES |
--------------------------
Device URI Model
-------------------------------- -------------------
hp:/usb/ENVY_5530_series?serial= HP ENVY 5530 series
CN595530XD06BX
---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------
ENVY-5530-series
----------------
Type: Printer
Device URI: hp:/usb/ENVY_5530_series?serial=CN595530XD06BX
PPD: /etc/cups/ppd/ENVY-5530-series.ppd
warning: Failed to read /etc/cups/ppd/ENVY-5530-series.ppd ppd file
PPD Description:
Printer status: printer ENVY-5530-series is idle. enabled since sam. 29 oct. 2016 12:52:44 CEST
Communication status: Good
--------------
| PERMISSION |
--------------
USB ENVY-5530-series Required - - OK Node:'/dev/bus/usb/006/004' Perm:' root lp rw- rw- rw- rw- rw- r--'
-----------
| SUMMARY |
-----------
Missing Required Dependencies
-----------------------------
None
Missing Optional Dependencies
-----------------------------
error: 'python-reportlab' package is missing/incompatible
Total Errors: 1
Total Warnings: 0
Run 'hp-doctor' command to prompt and fix the issues.
Done.
alain@debian:~$
curieusement , reportlab est déjà installé et ses paquets semblent en bon état .d'après synaptic.
il ne serait donc pas "absent" mais incompatible (oui mais avec quoi ? debian ?)
vu que tout fonctionne bien , je m'en fous un peu , mais , par curiosité , le problème est il solutionnable ?
si oui comment ? quels sont les risques de casse ?
pour avoir eu des problèmes avec le hp lip de hewlett packard , j'ai pas trop envie de l'installer sauf conseils et guides sérieux .
(ce que vous êtes tous , je le sais très bien )
Dernière modification par debian-alain (03-11-2016 16:09:41)