Bonjour à tous,
nouveau sur debian, je constate quelques erreurs au démarrage.
Tout d'abord, le matos:
me donne:
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4)
00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b4)
00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b4)
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 04)
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 04)
01:00.0 VGA compatible controller: NVIDIA Corporation GF108M [GeForce GT 540M] (rev a1)
02:00.0 Ethernet controller: Broadcom Limited NetLink BCM57785 Gigabit Ethernet PCIe (rev 10)
02:00.1 SD Host controller: Broadcom Limited BCM57765/57785 SDXC/MMC Card Reader (rev 10)
02:00.2 System peripheral: Broadcom Limited BCM57765/57785 MS Card Reader (rev 10)
02:00.3 System peripheral: Broadcom Limited BCM57765/57785 xD-Picture Card Reader (rev 10)
03:00.0 Network controller: Qualcomm Atheros AR9287 Wireless Network Adapter (PCI-Express) (rev 01)
05:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04)
-------
ensuite les erreurs en questions:
root@debian:/home/andrea#
-- Logs begin at Wed 2018-11-28 07:21:50 CET, end at Wed 2018-11-28 08:11:11 CET. --
nov 28 07:22:00 debian avahi-daemon[566]: chroot.c: open() failed: No such file or directory
nov 28 07:21:57 debian kernel: Bluetooth: Loading patch file failed
nov 28 07:21:57 debian kernel: usb 3-1.6: firmware: failed to load ar3k/AthrBT_0x01020200.dfu (-2)
nov 28 07:21:55 debian kernel: ACPI Error: Method parse/execution failed [\_SB.PCI0.PEG0.PEGP.DD02._BCL] (Node ffff8d45571dc4d8), AE_NOT_FOUND (201608
nov 28 07:21:55 debian kernel: ACPI Error: [\_SB_.PCI0.GFX0.DD02._BCL] Namespace lookup failure, AE_NOT_FOUND (20160831/psargs-359)
nov 28 07:21:55 debian kernel: ACPI Error: Method parse/execution failed [\_SB.PCI0.PEG0.PEGP.DD02._BCL] (Node ffff8d45571dc4d8), AE_NOT_FOUND (201608
nov 28 07:21:55 debian kernel: ACPI Error: [\_SB_.PCI0.GFX0.DD02._BCL] Namespace lookup failure, AE_NOT_FOUND (20160831/psargs-359)
lines 1-8/8 (END)
--------
ensuite je ne sais pas si ça peut servir mais..... :
root@debian:/home/andrea#
[ 0.011177] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.011178] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 10.868018] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20160831/utaddress-247)
[ 10.868026] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160831/utaddress-247)
[ 10.868030] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20160831/utaddress-247)
[ 10.868033] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160831/utaddress-247)
[ 10.868036] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20160831/utaddress-247)
[ 10.868039] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160831/utaddress-247)
[ 10.868042] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20160831/utaddress-247)
[ 10.868045] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 12.161630] MXM: GUID detected in BIOS
[ 12.161735] ACPI Warning: \_SB.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsarguments-95)
[ 12.161826] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsarguments-95)
[ 12.161921] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsarguments-95)
[ 13.369733] uvcvideo 3-1.3:1.0: Entity type for entity Extension 3 was not initialized!
[ 13.369737] uvcvideo 3-1.3:1.0: Entity type for entity Processing 2 was not initialized!
[ 13.369739] uvcvideo 3-1.3:1.0: Entity type for entity Camera 1 was not initialized!
[ 13.903367] usb 3-1.6: Direct firmware load for ar3k/AthrBT_0x01020200.dfu failed with error -2
[ 13.903407] ath3k: probe of 3-1.6:1.0 failed with error -2
[ 17.931718] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsarguments-95)
[ 17.932089] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsarguments-95)
................................
Info supplémentaires : mon wifi fonctionne, mon bluetooth non, quand aux performances graphiques, je les trouve médiocres et:
root@debian:/home/andrea# lsb_release -a
No LSB modules are available.
Distributor ID: Debian
Description: Debian GNU/Linux 9.6 (stretch)
Release: 9.6
Codename: stretch
.....
ps: je suis suis pas superbon, alors tout en douceur les explications :-)
un grand merci d'avance!
Edit à toto : Utiliser le BBCode du forum (Les gros boutons marqués Commande root etc...) permet d'éclaircir la lecture par tous de chaque commande et de son retour.
Dernière modification par andrea86 (28-11-2018 08:35:22)