Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#1 23-01-2017 12:47:17

TheoBz
Membre
Lieu : Grenoble
Distrib. : Stretch
Noyau : 4.8
(G)UI : Gnome3
Inscription : 01-12-2016
Site Web

KMS utilise la mauvaise sortie vidéo.

Salut à tous,
J'ai un Dell inspiron avec debian 9 mais rien n'est affiché lors du démarrage sur l’écran intégré (1366x768) il semble qu'il utilise une sortie qui est dans le chipset mais qui n'est pas physiquement présente. Après quelques recherches, il semble que cette décision est prise par KMS Lorsque je désactive KMS avec nomodeset mon tty est affiché sur l'écran de l'ordinateur portable. Le problème est que mon pilote graphique Intel nécessite KMS pour être activé et donc m'empêche de démarrer le serveur X sans KMS. Quand j'utilse la sortie HDMI (1920x1080), les deux écrans fonctionnent en mode étendu.
Merci d'avance pour votre aide - Théo.

Dernière modification par TheoBz (23-01-2017 14:56:40)

Hors ligne

#2 23-01-2017 18:50:29

robert2a
Membre
Lieu : France
Distrib. : Stretch 9
Noyau : Linux 4.9.0-3 4.9.30-2
(G)UI : Mate
Inscription : 15-11-2014

Re : KMS utilise la mauvaise sortie vidéo.

Bonsoir
1- sur un démarrage sans écran externe ton écran du portable ne s'allume pas (meme a l invite de logging graphique ? )
2-sur un démarrage avec un écran externe en HDMI ton bureau est étendu , ça fonctionne bien ,ton bureau est sur l'écran du portable ? (ou sur l'écran HDMI )

nota : pour KMS le driver intel est plus performant que celui du paquet  xsever-xorg-video-intel

tu peu peut etre donner le type de gpu intel de ton portable ?
pour la sortie vidéo qui est virtuelle , j en suis pas persuadé , une mauvaise définition (ou fréquence (hors limite) ) peu provoquer un écran noir . (a moins que tu est des informations que tu n'a pas posté ? )
répond aux questions ça va aider les membres a te guider  smile  ( d'utiliser l'écran HDMI externe va te permettre de faire les tests si besoin )
ps: KMS donne la définition optimale dés le démarrage  (donc après le chargement de grub et son menu ) , le chargement du serveur X se fait juste avant l invite de logging graphique .
préciser model et serie du  http://www.dell.com/fr/p/laptops#!dlpgi … on-laptops  de ton Dell Inspiron

Dernière modification par robert2a (23-01-2017 19:00:30)

En ligne

#3 23-01-2017 20:12:08

TheoBz
Membre
Lieu : Grenoble
Distrib. : Stretch
Noyau : 4.8
(G)UI : Gnome3
Inscription : 01-12-2016
Site Web

Re : KMS utilise la mauvaise sortie vidéo.

Bonsoir,

1- sur un démarrage sans écran externe ton écran du portable ne s'allume pas (meme a l invite de logging graphique ? )


Oui c'est ça

2-sur un démarrage avec un écran externe en HDMI ton bureau est étendu , ça fonctionne bien ,ton bureau est sur l'écran du portable ? (ou sur l'écran HDMI )


Et la aussi c'est ça.

tu peu peut etre donner le type de gpu intel de ton portable ?


HD Graphics (Braswell)

pour la sortie vidéo qui est virtuelle , j en suis pas persuadé , une mauvaise définition (ou fréquence (hors limite) ) peu provoquer un écran noir .


C'est ce que j'ai vu de mes recherche sur le web mais oui c'est possible, sachant que je n'ai rien configuré (xorg.conf/grub)!

(a moins que tu est des informations que tu n'a pas posté ? )


Je peux poster le kern.log ou le syslog ?

préciser model et serie du  http://www.dell.com/fr/p/laptops#!dlpgi … on-laptops  de ton Dell Inspiron


Dell 15 3552 Linux édition

Merci pour votre aide smile

Dernière modification par TheoBz (23-01-2017 20:14:51)

Hors ligne

#4 24-01-2017 01:47:45

robert2a
Membre
Lieu : France
Distrib. : Stretch 9
Noyau : Linux 4.9.0-3 4.9.30-2
(G)UI : Mate
Inscription : 15-11-2014

Re : KMS utilise la mauvaise sortie vidéo.

pour le point 1 tu reste flou  => 1- sur un démarrage sans écran externe ton écran du portable ne s'allume pas (meme a l invite de logging graphique ? )
donc je suppose que jamais tu retrouve ton bureau , ce qui est inquiétant , parce que normalement le serveur X prend la main et tu devrais avoir au moins la main pour entrer ton user et mdp .
et pour le cas avec l'écran HDMI je suppose que ton bureau est sur l'écran du portable et le HDMI est en "étendu" et vide .
je vois pas trop ce qu il se passe roll , pour gnome et stretch ton Xorg.1.log est dans ton dossier "user"

si tu viens d' allumer ton portable tu aura dans /home/user/.local/share/xorg/Xorg.1.log
nota: le dossier " .local " est cachè , il faut que tu affiche "fichiers et dossiers cachés "

sinon tu peu avoir Xorg.1.log et Xorg.1.log.old (le premier correspond au plus récent , le second le plus ancien ) .
si tu fais un démarrage sur l écran du portable puis un second avec le HDMI (tu aura les 2 logs , un qui bug (écran noir) et l autre bon (avec écran HDMI branché)

ps: je pense a un bug de debian (plus spécialement du noyau 4.8 ) mais sans certitude , voir ce que les autres membres en pense hmm

bon cela a peut etre encore changé  roll


[    13.022] (--) Log file renamed from "/var/lib/gdm3/.local/share/xorg/Xorg.pid-1136.log" to "/var/lib/gdm3/.local/share/xorg/Xorg.0.log"
 



le log contient la date de création pour vérifier si il est récent  => "/var/lib/gdm3/.local/share/xorg/Xorg.0.log"

aprés test il est copier aussi avec "1" dans le home de l user


[    29.529] (--) Log file renamed from "/home/robert/.local/share/xorg/Xorg.pid-1252.log" to "/home/robert/.local/share/xorg/Xorg.1.log"
[    29.530] (==) Log file: "/home/robert/.local/share/xorg/Xorg.1.log", Time: Tue Jan 24 01:12:48 2017

[    13.022] (--) Log file renamed from "/var/lib/gdm3/.local/share/xorg/Xorg.pid-1136.log" to "/var/lib/gdm3/.local/share/xorg/Xorg.0.log"
[    13.023] (==) Log file: "/var/lib/gdm3/.local/share/xorg/Xorg.0.log", Time: Tue Jan 24 01:12:31 2017
 


il y a un pid user et système

Dernière modification par robert2a (24-01-2017 02:34:13)

En ligne

#5 26-01-2017 23:26:35

TheoBz
Membre
Lieu : Grenoble
Distrib. : Stretch
Noyau : 4.8
(G)UI : Gnome3
Inscription : 01-12-2016
Site Web

Re : KMS utilise la mauvaise sortie vidéo.

pour le point 1 tu reste flou  => 1- sur un démarrage sans écran externe ton écran du portable ne s'allume pas (meme a l invite de logging graphique ? ) donc je suppose que jamais tu retrouve ton bureau


Il s'allume jusqu’à ce que démarre gdm et la il y a un écran noir même le rétroéclairage est inactif.

pour gnome et stretch ton Xorg.1.log est dans ton dossier "user"  si tu viens d' allumer ton portable tu aura dans /home/user/.local/share/xorg/Xorg.1.log nota: le dossier " .local " est cachè , il faut que tu affiche "fichiers et dossiers cachés "  sinon tu peu avoir Xorg.1.log et Xorg.1.log.old (le premier correspond au plus récent , le second le plus ancien ) . si tu fais un démarrage sur l écran du portable puis un second avec le HDMI (tu aura les 2 logs , un qui bug (écran noir) et l autre bon (avec écran HDMI branché)


Sans l’écran HDMI j'ai pas de log et avec j'ai des log !   

[    58.470] (--) Log file renamed from "/home/theo/.local/share/xorg/Xorg.pid-757.log" to "/home/theo/.local/share/xorg/Xorg.0.log"
[    58.473]
X.Org X Server 1.19.0
Release Date: 2016-11-15
[    58.473] X Protocol Version 11, Revision 0
[    58.473] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[    58.473] Current Operating System: Linux debian 4.9.0-1-amd64 #1 SMP Debian 4.9.2-2 (2017-01-12) x86_64
[    58.473] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-1-amd64 root=UUID=e4567d2f-3bb1-4aa3-8087-22b584e7e22f ro
[    58.473] Build Date: 16 December 2016  07:30:27PM
[    58.473] xorg-server 2:1.19.0-3 (https://www.debian.org/support)
[    58.473] Current version of pixman: 0.34.0
[    58.474]  Before reporting problems, check http://wiki.x.org
  to make sure that you have the latest version.
[    58.474] Markers: (--) probed, (**) from config file, (==) default setting,
  (++) from command line, (!!) notice, (II) informational,
  (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    58.474] (==) Log file: "/home/theo/.local/share/xorg/Xorg.0.log", Time: Thu Jan 26 22:05:09 2017
[    58.502] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    58.531] (==) No Layout section.  Using the first Screen section.
[    58.531] (==) No screen section available. Using defaults.
[    58.531] (**) |-->Screen "Default Screen Section" (0)
[    58.532] (**) |   |-->Monitor "<default monitor>"
[    58.533] (==) No monitor specified for screen "Default Screen Section".
  Using a default monitor configuration.
[    58.534] (==) Automatically adding devices
[    58.534] (==) Automatically enabling devices
[    58.534] (==) Automatically adding GPU devices
[    58.534] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    58.534] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    58.534]  Entry deleted from font path.
[    58.534] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    58.534]  Entry deleted from font path.
[    58.534] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    58.534]  Entry deleted from font path.
[    58.535] (WW) The directory "/usr/share/fonts/X11/Type1" does not exist.
[    58.535]  Entry deleted from font path.
[    58.535] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    58.535]  Entry deleted from font path.
[    58.535] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    58.535]  Entry deleted from font path.
[    58.535] (==) FontPath set to:
  /usr/share/fonts/X11/misc,
  built-ins
[    58.535] (==) ModulePath set to "/usr/lib/xorg/modules"
[    58.535] (II) The server relies on udev to provide the list of input devices.
  If no devices become available, reconfigure udev or disable AutoAddDevices.
[    58.535] (II) Loader magic: 0x55cc6b157e00
[    58.535] (II) Module ABI versions:
[    58.535]  X.Org ANSI C Emulation: 0.4
[    58.535]  X.Org Video Driver: 23.0
[    58.536]  X.Org XInput driver : 24.1
[    58.536]  X.Org Server Extension : 10.0
[    58.541] (++) using VT number 2

[    58.548] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_32
[    58.550] (II) xfree86: Adding drm device (/dev/dri/card0)
[    58.551] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 12 paused 0
[    58.553] (--) PCI:*(0:0:2:0) 8086:22b1:1028:06ac rev 33, Mem @ 0x90000000/16777216, 0x80000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[    58.553] (II) LoadModule: "glx"
[    58.562] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    58.584] (II) Module glx: vendor="X.Org Foundation"
[    58.584]  compiled for 1.19.0, module version = 1.0.0
[    58.584]  ABI class: X.Org Server Extension, version 10.0
[    58.584] (==) Matched modesetting as autoconfigured driver 0
[    58.584] (==) Matched fbdev as autoconfigured driver 1
[    58.584] (==) Matched vesa as autoconfigured driver 2
[    58.584] (==) Assigned the driver to the xf86ConfigLayout
[    58.584] (II) LoadModule: "modesetting"
[    58.584] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    58.585] (II) Module modesetting: vendor="X.Org Foundation"
[    58.585]  compiled for 1.19.0, module version = 1.19.0
[    58.585]  Module class: X.Org Video Driver
[    58.585]  ABI class: X.Org Video Driver, version 23.0
[    58.585] (II) LoadModule: "fbdev"
[    58.585] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    58.596] (II) Module fbdev: vendor="X.Org Foundation"
[    58.596]  compiled for 1.19.0, module version = 0.4.4
[    58.596]  Module class: X.Org Video Driver
[    58.596]  ABI class: X.Org Video Driver, version 23.0
[    58.596] (II) LoadModule: "vesa"
[    58.597] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    58.597] (II) Module vesa: vendor="X.Org Foundation"
[    58.598]  compiled for 1.19.0, module version = 2.3.4
[    58.598]  Module class: X.Org Video Driver
[    58.598]  ABI class: X.Org Video Driver, version 23.0
[    58.598] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    58.598] (II) FBDEV: driver for framebuffer: fbdev
[    58.598] (II) VESA: driver for VESA chipsets: vesa
[    58.598] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[    58.598] (II) modeset(0): using drv /dev/dri/card0
[    58.598] (WW) Falling back to old probe method for fbdev
[    58.599] (II) Loading sub module "fbdevhw"
[    58.599] (II) LoadModule: "fbdevhw"
[    58.599] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    58.601] (II) Module fbdevhw: vendor="X.Org Foundation"
[    58.602]  compiled for 1.19.0, module version = 0.0.2
[    58.602]  ABI class: X.Org Video Driver, version 23.0
[    58.602] (WW) Falling back to old probe method for vesa
[    58.602] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[    58.602] (II) modeset(0): Creating default Display subsection in Screen section
  "Default Screen Section" for depth/fbbpp 24/32
[    58.602] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[    58.602] (==) modeset(0): RGB weight 888
[    58.602] (==) modeset(0): Default visual is TrueColor
[    58.602] (II) Loading sub module "glamoregl"
[    58.602] (II) LoadModule: "glamoregl"
[    58.603] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[    58.631] (II) Module glamoregl: vendor="X.Org Foundation"
[    58.631]  compiled for 1.19.0, module version = 1.0.0
[    58.631]  ABI class: X.Org ANSI C Emulation, version 0.4
[    58.631] (II) glamor: OpenGL accelerated X.org driver based.
[    58.660] (II) glamor: EGL version 1.4 (DRI2):
[    58.663] (II) modeset(0): glamor initialized
[    58.664] (II) modeset(0): Output eDP-1 has no monitor section
[    58.745] (II) modeset(0): Output DP-1 has no monitor section
[    58.773] (II) modeset(0): Output HDMI-1 has no monitor section
[    58.859] (II) modeset(0): Output DP-2 has no monitor section
[    59.040] (II) modeset(0): Output HDMI-2 has no monitor section
[    59.041] (II) modeset(0): EDID for output eDP-1
[    59.041] (II) modeset(0): Manufacturer: LGD  Model: 484  Serial#: 0
[    59.041] (II) modeset(0): Year: 2014  Week: 0
[    59.041] (II) modeset(0): EDID Version: 1.4
[    59.041] (II) modeset(0): Digital Display Input
[    59.041] (II) modeset(0): 6 bits per channel
[    59.041] (II) modeset(0): Digital interface is DisplayPort
[    59.041] (II) modeset(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[    59.041] (II) modeset(0): Gamma: 2.20
[    59.041] (II) modeset(0): No DPMS capabilities specified
[    59.041] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[    59.042] (II) modeset(0): First detailed timing is preferred mode
[    59.042] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[    59.042] (II) modeset(0): redX: 0.578 redY: 0.344   greenX: 0.337 greenY: 0.571
[    59.042] (II) modeset(0): blueX: 0.159 blueY: 0.120   whiteX: 0.313 whiteY: 0.329
[    59.042] (II) modeset(0): Manufacturer's mask: 0
[    59.042] (II) modeset(0): Supported detailed timing:
[    59.042] (II) modeset(0): clock: 76.3 MHz   Image Size:  344 x 194 mm
[    59.042] (II) modeset(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1610 h_border: 0
[    59.042] (II) modeset(0): v_active: 768  v_sync: 771  v_sync_end 776 v_blanking: 790 v_border: 0
[    59.042] (II) modeset(0): Supported detailed timing:
[    59.042] (II) modeset(0): clock: 61.0 MHz   Image Size:  344 x 194 mm
[    59.042] (II) modeset(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1610 h_border: 0
[    59.042] (II) modeset(0): v_active: 768  v_sync: 771  v_sync_end 776 v_blanking: 790 v_border: 0
[    59.042] (II) modeset(0):  015J5€156WHB
[    59.042] (II) modeset(0): Unknown vendor-specific block 0
[    59.042] (II) modeset(0): EDID (in hex):
[    59.042] (II) modeset(0):   00ffffffffffff0030e4840400000000
[    59.042] (II) modeset(0):   00180104952213780a05f59458569228
[    59.042] (II) modeset(0):   1e505400000001010101010101010101
[    59.042] (II) modeset(0):   010101010101d01d56f4500016303020
[    59.042] (II) modeset(0):   350058c21000001ad91756f450001630
[    59.042] (II) modeset(0):   3020350058c21000001a000000fe0030
[    59.042] (II) modeset(0):   31354a35803135365748420a00000000
[    59.042] (II) modeset(0):   00004131940010000009010a20200086
[    59.042] (II) modeset(0): Printing probed modes for output eDP-1
[    59.042] (II) modeset(0): Modeline "1366x768"x60.0   76.32  1366 1414 1446 1610  768 771 776 790 +hsync -vsync (47.4 kHz eP)
[    59.042] (II) modeset(0): Modeline "1366x768"x48.0   61.05  1366 1414 1446 1610  768 771 776 790 +hsync -vsync (37.9 kHz e)
[    59.043] (II) modeset(0): Modeline "1360x768"x59.8   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsync (47.7 kHz d)
[    59.043] (II) modeset(0): Modeline "1360x768"x60.0   72.00  1360 1408 1440 1520  768 771 781 790 +hsync -vsync (47.4 kHz d)
[    59.043] (II) modeset(0): Modeline "1024x768"x120.1  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[    59.043] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[    59.043] (II) modeset(0): Modeline "960x720"x120.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[    59.043] (II) modeset(0): Modeline "928x696"x120.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[    59.043] (II) modeset(0): Modeline "896x672"x120.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[    59.043] (II) modeset(0): Modeline "960x600"x120.0   77.00  960 984 1000 1040  600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[    59.043] (II) modeset(0): Modeline "960x540"x120.0   69.25  960 984 1000 1040  540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[    59.043] (II) modeset(0): Modeline "800x600"x120.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[    59.043] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    59.043] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    59.043] (II) modeset(0): Modeline "840x525"x120.0   73.12  840 892 980 1120  525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[    59.043] (II) modeset(0): Modeline "840x525"x119.8   59.50  840 864 880 920  525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[    59.043] (II) modeset(0): Modeline "800x512"x120.3   51.56  800 800 828 832  512 512 514 515 doublescan +hsync +vsync (62.0 kHz d)
[    59.043] (II) modeset(0): Modeline "700x525"x120.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[    59.043] (II) modeset(0): Modeline "640x512"x120.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[    59.043] (II) modeset(0): Modeline "720x450"x119.8   53.25  720 760 836 952  450 451 454 467 doublescan -hsync +vsync (55.9 kHz d)
[    59.043] (II) modeset(0): Modeline "640x480"x120.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[    59.043] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[    59.043] (II) modeset(0): Modeline "680x384"x119.6   42.38  680 716 784 888  384 385 390 399 doublescan -hsync +vsync (47.7 kHz d)
[    59.043] (II) modeset(0): Modeline "680x384"x119.9   36.00  680 704 720 760  384 385 390 395 doublescan +hsync -vsync (47.4 kHz d)
[    59.043] (II) modeset(0): Modeline "576x432"x120.1   40.81  576 608 668 760  432 432 434 447 doublescan -hsync +vsync (53.7 kHz d)
[    59.043] (II) modeset(0): Modeline "512x384"x120.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[    59.043] (II) modeset(0): Modeline "400x300"x120.6   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[    59.043] (II) modeset(0): Modeline "400x300"x112.7   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[    59.043] (II) modeset(0): Modeline "320x240"x120.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[    59.122] (II) modeset(0): EDID for output DP-1
[    59.150] (II) modeset(0): EDID for output HDMI-1
[    59.150] (II) modeset(0): Manufacturer: IVM  Model: 6113  Serial#: 5089
[    59.150] (II) modeset(0): Year: 2016  Week: 30
[    59.150] (II) modeset(0): EDID Version: 1.3
[    59.150] (II) modeset(0): Digital Display Input
[    59.150] (II) modeset(0): Max Image Size [cm]: horiz.: 53  vert.: 30
[    59.150] (II) modeset(0): Gamma: 2.20
[    59.150] (II) modeset(0): DPMS capabilities: Off
[    59.151] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[    59.151] (II) modeset(0): First detailed timing is preferred mode
[    59.151] (II) modeset(0): redX: 0.645 redY: 0.332   greenX: 0.315 greenY: 0.619
[    59.151] (II) modeset(0): blueX: 0.151 blueY: 0.065   whiteX: 0.313 whiteY: 0.329
[    59.151] (II) modeset(0): Supported established timings:
[    59.151] (II) modeset(0): 720x400@70Hz
[    59.151] (II) modeset(0): 640x480@60Hz
[    59.151] (II) modeset(0): 640x480@75Hz
[    59.151] (II) modeset(0): 800x600@60Hz
[    59.151] (II) modeset(0): 800x600@75Hz
[    59.151] (II) modeset(0): 832x624@75Hz
[    59.151] (II) modeset(0): 1024x768@60Hz
[    59.151] (II) modeset(0): 1024x768@75Hz
[    59.151] (II) modeset(0): 1280x1024@75Hz
[    59.151] (II) modeset(0): 1152x864@75Hz
[    59.152] (II) modeset(0): Manufacturer's mask: 0
[    59.152] (II) modeset(0): Supported standard timings:
[    59.152] (II) modeset(0): #0: hsize: 1152  vsize 720  refresh: 60  vid: 113
[    59.152] (II) modeset(0): #1: hsize: 1280  vsize 960  refresh: 60  vid: 16513
[    59.152] (II) modeset(0): #2: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    59.152] (II) modeset(0): #3: hsize: 1600  vsize 1200  refresh: 60  vid: 16553
[    59.152] (II) modeset(0): #4: hsize: 1680  vsize 1050  refresh: 60  vid: 179
[    59.152] (II) modeset(0): #5: hsize: 1440  vsize 900  refresh: 60  vid: 149
[    59.152] (II) modeset(0): #6: hsize: 1920  vsize 1080  refresh: 60  vid: 49361
[    59.152] (II) modeset(0): Supported detailed timing:
[    59.152] (II) modeset(0): clock: 148.5 MHz   Image Size:  531 x 299 mm
[    59.153] (II) modeset(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[    59.153] (II) modeset(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[    59.153] (II) modeset(0): Serial No: 1127863045089
[    59.153] (II) modeset(0): Ranges: V min: 55 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
[    59.153] (II) modeset(0): Monitor name: PLE2483H
[    59.153] (II) modeset(0): Supported detailed timing:
[    59.153] (II) modeset(0): clock: 148.5 MHz   Image Size:  531 x 299 mm
[    59.153] (II) modeset(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[    59.153] (II) modeset(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[    59.153] (II) modeset(0): Supported detailed timing:
[    59.153] (II) modeset(0): clock: 74.2 MHz   Image Size:  531 x 299 mm
[    59.153] (II) modeset(0): h_active: 1920  h_sync: 2448  h_sync_end 2492 h_blank_end 2640 h_border: 0
[    59.154] (II) modeset(0): v_active: 540  v_sync: 542  v_sync_end 547 v_blanking: 562 v_border: 0
[    59.154] (II) modeset(0): Supported detailed timing:
[    59.154] (II) modeset(0): clock: 74.2 MHz   Image Size:  531 x 299 mm
[    59.154] (II) modeset(0): h_active: 1280  h_sync: 1720  h_sync_end 1760 h_blank_end 1980 h_border: 0
[    59.154] (II) modeset(0): v_active: 720  v_sync: 725  v_sync_end 730 v_blanking: 750 v_border: 0
[    59.154] (II) modeset(0): Supported detailed timing:
[    59.154] (II) modeset(0): clock: 27.0 MHz   Image Size:  531 x 299 mm
[    59.154] (II) modeset(0): h_active: 720  h_sync: 732  h_sync_end 796 h_blank_end 864 h_border: 0
[    59.154] (II) modeset(0): v_active: 576  v_sync: 581  v_sync_end 586 v_blanking: 625 v_border: 0
[    59.155] (II) modeset(0): Supported detailed timing:
[    59.155] (II) modeset(0): clock: 148.5 MHz   Image Size:  531 x 299 mm
[    59.155] (II) modeset(0): h_active: 1920  h_sync: 2448  h_sync_end 2492 h_blank_end 2640 h_border: 0
[    59.155] (II) modeset(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[    59.155] (II) modeset(0): Number of EDID sections to follow: 1
[    59.155] (II) modeset(0): EDID (in hex):
[    59.155] (II) modeset(0):   00ffffffffffff0026cd1361e1130000
[    59.155] (II) modeset(0):   1e1a010380351e782a0ef5a555509e26
[    59.155] (II) modeset(0):   105054a56b80710081408180a940b300
[    59.155] (II) modeset(0):   9500d1c00101023a801871382d40582c
[    59.155] (II) modeset(0):   4500132b2100001e000000ff00313132
[    59.156] (II) modeset(0):   37383633303435303839000000fd0037
[    59.156] (II) modeset(0):   4c1e5311000a202020202020000000fc
[    59.156] (II) modeset(0):   00504c4532343833480a20202020018c
[    59.156] (II) modeset(0):   020322f14f9005040302011112131406
[    59.156] (II) modeset(0):   0715161f230907018301000065030c00
[    59.156] (II) modeset(0):   1000023a801871382d40582c4500132b
[    59.156] (II) modeset(0):   2100001f011d80d0721c1620102c2580
[    59.156] (II) modeset(0):   132b2100009e011d00bc52d01e20b828
[    59.156] (II) modeset(0):   5540132b2100001e8c0ad09020403120
[    59.156] (II) modeset(0):   0c405500132b21000018023a80d07238
[    59.156] (II) modeset(0):   2d40102c4580132b2100001e000000d0
[    59.157] (II) modeset(0): Printing probed modes for output HDMI-1
[    59.157] (II) modeset(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    59.157] (II) modeset(0): Modeline "1920x1080"x50.0  148.50  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[    59.157] (II) modeset(0): Modeline "1920x1080"x59.9  148.35  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[    59.157] (II) modeset(0): Modeline "1920x1080i"x60.0   74.25  1920 2008 2052 2200  1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[    59.157] (II) modeset(0): Modeline "1920x1080i"x50.0   74.25  1920 2448 2492 2640  1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[    59.157] (II) modeset(0): Modeline "1920x1080i"x59.9   74.18  1920 2008 2052 2200  1080 1084 1094 1125 interlace +hsync +vsync (33.7 kHz e)
[    59.157] (II) modeset(0): Modeline "1600x1200"x60.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[    59.157] (II) modeset(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[    59.157] (II) modeset(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    59.157] (II) modeset(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    59.157] (II) modeset(0): Modeline "1440x900"x59.9   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[    59.157] (II) modeset(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[    59.157] (II) modeset(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    59.157] (II) modeset(0): Modeline "1280x720"x60.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[    59.158] (II) modeset(0): Modeline "1280x720"x50.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz e)
[    59.158] (II) modeset(0): Modeline "1280x720"x59.9   74.18  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[    59.158] (II) modeset(0): Modeline "1152x720"x60.0   67.28  1152 1208 1328 1504  720 721 724 746 -hsync +vsync (44.7 kHz)
[    59.158] (II) modeset(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    59.158] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    59.158] (II) modeset(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    59.158] (II) modeset(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    59.158] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    59.158] (II) modeset(0): Modeline "720x576"x50.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz e)
[    59.158] (II) modeset(0): Modeline "720x576i"x50.0   13.50  720 732 795 864  576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[    59.158] (II) modeset(0): Modeline "720x480"x60.0   27.03  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[    59.158] (II) modeset(0): Modeline "720x480"x59.9   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[    59.158] (II) modeset(0): Modeline "720x480i"x60.0   13.51  720 739 801 858  480 488 494 525 interlace -hsync -vsync (15.8 kHz e)
[    59.158] (II) modeset(0): Modeline "720x480i"x59.9   13.50  720 739 801 858  480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[    59.158] (II) modeset(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    59.158] (II) modeset(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    59.158] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    59.158] (II) modeset(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    59.252] (II) modeset(0): EDID for output DP-2
[    59.436] (II) modeset(0): EDID for output HDMI-2
[    59.436] (II) modeset(0): Output eDP-1 connected
[    59.436] (II) modeset(0): Output DP-1 disconnected
[    59.436] (II) modeset(0): Output HDMI-1 connected
[    59.436] (II) modeset(0): Output DP-2 disconnected
[    59.436] (II) modeset(0): Output HDMI-2 disconnected
[    59.436] (II) modeset(0): Using spanning desktop for initial modes
[    59.436] (II) modeset(0): Output eDP-1 using initial mode 1366x768 +0+0
[    59.436] (II) modeset(0): Output HDMI-1 using initial mode 1920x1080 +1366+0
[    59.436] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[    59.436] (==) modeset(0): DPI set to (96, 96)
[    59.436] (II) Loading sub module "fb"
[    59.436] (II) LoadModule: "fb"
[    59.436] (II) Loading /usr/lib/xorg/modules/libfb.so
[    59.441] (II) Module fb: vendor="X.Org Foundation"
[    59.441]  compiled for 1.19.0, module version = 1.0.0
[    59.441]  ABI class: X.Org ANSI C Emulation, version 0.4
[    59.441] (II) UnloadModule: "fbdev"
[    59.441] (II) Unloading fbdev
[    59.441] (II) UnloadSubModule: "fbdevhw"
[    59.441] (II) Unloading fbdevhw
[    59.441] (II) UnloadModule: "vesa"
[    59.441] (II) Unloading vesa
[    59.441] (==) Depth 24 pixmap format is 32 bpp
[    59.656] (==) modeset(0): Backing store enabled
[    59.656] (==) modeset(0): Silken mouse enabled
[    59.657] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    59.730] (==) modeset(0): DPMS enabled
[    59.731] (II) modeset(0): [DRI2] Setup complete
[    59.731] (II) modeset(0): [DRI2]   DRI driver: i965
[    59.731] (II) modeset(0): [DRI2]   VDPAU driver: i965
[    59.731] (--) RandR disabled
[    59.746] (II) SELinux: Disabled on system
[    59.755] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    59.755] (II) AIGLX: enabled GLX_ARB_create_context
[    59.755] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    59.755] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[    59.755] (II) AIGLX: enabled GLX_INTEL_swap_event
[    59.756] (II) AIGLX: enabled GLX_SGI_swap_control
[    59.756] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[    59.756] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[    59.756] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[    59.756] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    59.756] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[    59.756] (II) AIGLX: Loaded and initialized i965
[    59.756] (II) GLX: Initialized DRI2 GL provider for screen 0
[    59.762] (II) modeset(0): Damage tracking initialized
[    59.762] (II) modeset(0): Setting screen physical size to 869 x 285
[    59.848] (II) config/udev: Adding input device Power Button (/dev/input/event6)
[    59.848] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    59.848] (II) LoadModule: "libinput"
[    59.848] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    59.867] (II) Module libinput: vendor="X.Org Foundation"
[    59.867]  compiled for 1.19.0, module version = 0.23.0
[    59.867]  Module class: X.Org XInput Driver
[    59.867]  ABI class: X.Org XInput driver, version 24.1
[    59.867] (II) Using input driver 'libinput' for 'Power Button'
[    59.869] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 21 paused 0
[    59.869] (**) Power Button: always reports core events
[    59.869] (**) Option "Device" "/dev/input/event6"
[    59.870] (**) Option "_source" "server/udev"
[    59.871] (II) input device 'Power Button', /dev/input/event6 is tagged by udev as: Keyboard
[    59.871] (II) input device 'Power Button', /dev/input/event6 is a keyboard
[    59.871] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input8/event6"
[    59.871] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    59.871] (**) Option "xkb_model" "pc105"
[    59.871] (**) Option "xkb_layout" "fr"
[    59.871] (**) Option "xkb_variant" "latin9"
[    59.923] (II) input device 'Power Button', /dev/input/event6 is tagged by udev as: Keyboard
[    59.923] (II) input device 'Power Button', /dev/input/event6 is a keyboard
[    59.924] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[    59.924] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    59.924] (II) Using input driver 'libinput' for 'Video Bus'
[    59.925] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 24 paused 0
[    59.925] (**) Video Bus: always reports core events
[    59.925] (**) Option "Device" "/dev/input/event8"
[    59.925] (**) Option "_source" "server/udev"
[    59.926] (II) input device 'Video Bus', /dev/input/event8 is tagged by udev as: Keyboard
[    59.926] (II) input device 'Video Bus', /dev/input/event8 is a keyboard
[    59.926] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10/event8"
[    59.926] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    59.926] (**) Option "xkb_model" "pc105"
[    59.926] (**) Option "xkb_layout" "fr"
[    59.926] (**) Option "xkb_variant" "latin9"
[    59.927] (II) input device 'Video Bus', /dev/input/event8 is tagged by udev as: Keyboard
[    59.927] (II) input device 'Video Bus', /dev/input/event8 is a keyboard
[    59.928] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[    59.928] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    59.928] (II) Using input driver 'libinput' for 'Power Button'
[    59.929] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 25 paused 0
[    59.929] (**) Power Button: always reports core events
[    59.929] (**) Option "Device" "/dev/input/event4"
[    59.929] (**) Option "_source" "server/udev"
[    59.930] (II) input device 'Power Button', /dev/input/event4 is tagged by udev as: Keyboard
[    59.930] (II) input device 'Power Button', /dev/input/event4 is a keyboard
[    59.930] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6/event4"
[    59.930] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[    59.930] (**) Option "xkb_model" "pc105"
[    59.930] (**) Option "xkb_layout" "fr"
[    59.930] (**) Option "xkb_variant" "latin9"
[    59.931] (II) input device 'Power Button', /dev/input/event4 is tagged by udev as: Keyboard
[    59.931] (II) input device 'Power Button', /dev/input/event4 is a keyboard
[    59.932] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[    59.932] (II) No input driver specified, ignoring this device.
[    59.932] (II) This device may have been added with another device file.
[    59.933] (II) config/udev: Adding input device Sleep Button (/dev/input/event5)
[    59.933] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[    59.933] (II) Using input driver 'libinput' for 'Sleep Button'
[    59.934] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 26 paused 0
[    59.934] (**) Sleep Button: always reports core events
[    59.934] (**) Option "Device" "/dev/input/event5"
[    59.934] (**) Option "_source" "server/udev"
[    59.935] (II) input device 'Sleep Button', /dev/input/event5 is tagged by udev as: Keyboard
[    59.935] (II) input device 'Sleep Button', /dev/input/event5 is a keyboard
[    59.935] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input7/event5"
[    59.935] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[    59.935] (**) Option "xkb_model" "pc105"
[    59.935] (**) Option "xkb_layout" "fr"
[    59.935] (**) Option "xkb_variant" "latin9"
[    59.936] (II) input device 'Sleep Button', /dev/input/event5 is tagged by udev as: Keyboard
[    59.936] (II) input device 'Sleep Button', /dev/input/event5 is a keyboard
[    59.938] (II) config/udev: Adding input device Integrated_Webcam_HD (/dev/input/event13)
[    59.938] (**) Integrated_Webcam_HD: Applying InputClass "libinput keyboard catchall"
[    59.938] (II) Using input driver 'libinput' for 'Integrated_Webcam_HD'
[    59.939] (II) systemd-logind: got fd for /dev/input/event13 13:77 fd 27 paused 0
[    59.940] (**) Integrated_Webcam_HD: always reports core events
[    59.940] (**) Option "Device" "/dev/input/event13"
[    59.940] (**) Option "_source" "server/udev"
[    59.941] (II) input device 'Integrated_Webcam_HD', /dev/input/event13 is tagged by udev as: Keyboard
[    59.941] (II) input device 'Integrated_Webcam_HD', /dev/input/event13 is a keyboard
[    59.941] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input15/event13"
[    59.941] (II) XINPUT: Adding extended input device "Integrated_Webcam_HD" (type: KEYBOARD, id 10)
[    59.941] (**) Option "xkb_model" "pc105"
[    59.941] (**) Option "xkb_layout" "fr"
[    59.941] (**) Option "xkb_variant" "latin9"
[    59.942] (II) input device 'Integrated_Webcam_HD', /dev/input/event13 is tagged by udev as: Keyboard
[    59.942] (II) input device 'Integrated_Webcam_HD', /dev/input/event13 is a keyboard
[    59.943] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event10)
[    59.943] (II) No input driver specified, ignoring this device.
[    59.943] (II) This device may have been added with another device file.
[    59.944] (II) config/udev: Adding input device HDA Intel PCH Headphone Mic (/dev/input/event11)
[    59.944] (II) No input driver specified, ignoring this device.
[    59.944] (II) This device may have been added with another device file.
[    59.945] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event12)
[    59.945] (II) No input driver specified, ignoring this device.
[    59.945] (II) This device may have been added with another device file.
[    59.946] (II) config/udev: Adding input device DLL06AC:00 06CB:78F1 (/dev/input/event1)
[    59.946] (**) DLL06AC:00 06CB:78F1: Applying InputClass "libinput touchpad catchall"
[    59.946] (II) Using input driver 'libinput' for 'DLL06AC:00 06CB:78F1'
[    60.062] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 28 paused 0
[    60.062] (**) DLL06AC:00 06CB:78F1: always reports core events
[    60.062] (**) Option "Device" "/dev/input/event1"
[    60.062] (**) Option "_source" "server/udev"
[    60.066] (II) input device 'DLL06AC:00 06CB:78F1', /dev/input/event1 is tagged by udev as: Touchpad
[    60.066] (II) input device 'DLL06AC:00 06CB:78F1', /dev/input/event1 is a touchpad
[    60.068] (**) Option "config_info" "udev:/sys/devices/pci0000:00/808622C1:00/i2c-0/i2c-DLL06AC:00/0018:06CB:78F1.0001/input/input4/event1"
[    60.068] (II) XINPUT: Adding extended input device "DLL06AC:00 06CB:78F1" (type: TOUCHPAD, id 11)
[    60.071] (**) Option "AccelerationScheme" "none"
[    60.071] (**) DLL06AC:00 06CB:78F1: (accel) selected scheme none/0
[    60.071] (**) DLL06AC:00 06CB:78F1: (accel) acceleration factor: 2.000
[    60.071] (**) DLL06AC:00 06CB:78F1: (accel) acceleration threshold: 4
[    60.074] (II) input device 'DLL06AC:00 06CB:78F1', /dev/input/event1 is tagged by udev as: Touchpad
[    60.074] (II) input device 'DLL06AC:00 06CB:78F1', /dev/input/event1 is a touchpad
[    60.074] (II) config/udev: Adding input device DLL06AC:00 06CB:78F1 (/dev/input/mouse0)
[    60.074] (II) No input driver specified, ignoring this device.
[    60.074] (II) This device may have been added with another device file.
[    60.075] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    60.075] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[    60.075] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[    60.077] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 29 paused 0
[    60.077] (**) AT Translated Set 2 keyboard: always reports core events
[    60.077] (**) Option "Device" "/dev/input/event0"
[    60.077] (**) Option "_source" "server/udev"
[    60.078] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[    60.078] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[    60.078] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    60.078] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[    60.078] (**) Option "xkb_model" "pc105"
[    60.078] (**) Option "xkb_layout" "fr"
[    60.078] (**) Option "xkb_variant" "latin9"
[    60.079] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[    60.079] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[    60.080] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/event2)
[    60.081] (**) PS/2 Generic Mouse: Applying InputClass "libinput pointer catchall"
[    60.081] (II) Using input driver 'libinput' for 'PS/2 Generic Mouse'
[    60.082] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 30 paused 0
[    60.082] (**) PS/2 Generic Mouse: always reports core events
[    60.082] (**) Option "Device" "/dev/input/event2"
[    60.082] (**) Option "_source" "server/udev"
[    60.083] (II) input device 'PS/2 Generic Mouse', /dev/input/event2 is tagged by udev as: Mouse
[    60.083] (II) input device 'PS/2 Generic Mouse', /dev/input/event2 is a pointer caps
[    60.083] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input3/event2"
[    60.083] (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE, id 13)
[    60.084] (**) Option "AccelerationScheme" "none"
[    60.084] (**) PS/2 Generic Mouse: (accel) selected scheme none/0
[    60.084] (**) PS/2 Generic Mouse: (accel) acceleration factor: 2.000
[    60.084] (**) PS/2 Generic Mouse: (accel) acceleration threshold: 4
[    60.085] (II) input device 'PS/2 Generic Mouse', /dev/input/event2 is tagged by udev as: Mouse
[    60.085] (II) input device 'PS/2 Generic Mouse', /dev/input/event2 is a pointer caps
[    60.086] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/mouse1)
[    60.086] (II) No input driver specified, ignoring this device.
[    60.086] (II) This device may have been added with another device file.
[    60.086] (II) config/udev: Adding input device PC Speaker (/dev/input/event9)
[    60.087] (II) No input driver specified, ignoring this device.
[    60.087] (II) This device may have been added with another device file.
[    60.088] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event14)
[    60.088] (**) Dell WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[    60.088] (II) Using input driver 'libinput' for 'Dell WMI hotkeys'
[    60.089] (II) systemd-logind: got fd for /dev/input/event14 13:78 fd 31 paused 0
[    60.089] (**) Dell WMI hotkeys: always reports core events
[    60.089] (**) Option "Device" "/dev/input/event14"
[    60.089] (**) Option "_source" "server/udev"
[    60.090] (II) input device 'Dell WMI hotkeys', /dev/input/event14 is tagged by udev as: Keyboard
[    60.090] (II) input device 'Dell WMI hotkeys', /dev/input/event14 is a keyboard
[    60.090] (**) Option "config_info" "udev:/sys/devices/virtual/input/input16/event14"
[    60.090] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 14)
[    60.090] (**) Option "xkb_model" "pc105"
[    60.090] (**) Option "xkb_layout" "fr"
[    60.090] (**) Option "xkb_variant" "latin9"
[    60.092] (II) input device 'Dell WMI hotkeys', /dev/input/event14 is tagged by udev as: Keyboard
[    60.092] (II) input device 'Dell WMI hotkeys', /dev/input/event14 is a keyboard
[    60.092] (II) config/udev: Adding input device DELL Wireless hotkeys (/dev/input/event7)
[    60.092] (**) DELL Wireless hotkeys: Applying InputClass "libinput keyboard catchall"
[    60.092] (II) Using input driver 'libinput' for 'DELL Wireless hotkeys'
[    60.094] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 32 paused 0
[    60.094] (**) DELL Wireless hotkeys: always reports core events
[    60.094] (**) Option "Device" "/dev/input/event7"
[    60.094] (**) Option "_source" "server/udev"
[    60.095] (II) input device 'DELL Wireless hotkeys', /dev/input/event7 is tagged by udev as: Keyboard
[    60.095] (II) input device 'DELL Wireless hotkeys', /dev/input/event7 is a keyboard
[    60.095] (**) Option "config_info" "udev:/sys/devices/virtual/input/input9/event7"
[    60.095] (II) XINPUT: Adding extended input device "DELL Wireless hotkeys" (type: KEYBOARD, id 15)
[    60.095] (**) Option "xkb_model" "pc105"
[    60.095] (**) Option "xkb_layout" "fr"
[    60.095] (**) Option "xkb_variant" "latin9"
[    60.096] (II) input device 'DELL Wireless hotkeys', /dev/input/event7 is tagged by udev as: Keyboard
[    60.096] (II) input device 'DELL Wireless hotkeys', /dev/input/event7 is a keyboard
[    63.771] (II) modeset(0): EDID vendor "LGD", prod id 1156
[    63.771] (II) modeset(0): Printing DDC gathered Modelines:
[    63.771] (II) modeset(0): Modeline "1366x768"x0.0   76.32  1366 1414 1446 1610  768 771 776 790 +hsync -vsync (47.4 kHz eP)
[    63.771] (II) modeset(0): Modeline "1366x768"x0.0   61.05  1366 1414 1446 1610  768 771 776 790 +hsync -vsync (37.9 kHz e)
[    70.403] (II) modeset(0): EDID vendor "LGD", prod id 1156
[    70.403] (II) modeset(0): Printing DDC gathered Modelines:
[    70.403] (II) modeset(0): Modeline "1366x768"x0.0   76.32  1366 1414 1446 1610  768 771 776 790 +hsync -vsync (47.4 kHz eP)
[    70.403] (II) modeset(0): Modeline "1366x768"x0.0   61.05  1366 1414 1446 1610  768 771 776 790 +hsync -vsync (37.9 kHz e)
[    86.574] (**) Option "fd" "21"
[    86.574] (**) Option "fd" "24"
[    86.574] (**) Option "fd" "25"
[    86.574] (**) Option "fd" "26"
[    86.574] (**) Option "fd" "27"
[    86.575] (**) Option "fd" "28"
[    86.575] (**) Option "fd" "29"
[    86.575] (**) Option "fd" "30"
[    86.575] (**) Option "fd" "31"
[    86.575] (**) Option "fd" "32"
[    86.576] (II) UnloadModule: "libinput"
[    86.576] (II) systemd-logind: releasing fd for 13:71
[    86.772] (II) UnloadModule: "libinput"
[    86.772] (II) systemd-logind: releasing fd for 13:78
[    86.794] (II) UnloadModule: "libinput"
[    86.795] (II) systemd-logind: releasing fd for 13:66
[    86.828] (II) UnloadModule: "libinput"
[    86.828] (II) systemd-logind: releasing fd for 13:64
[    86.868] (II) UnloadModule: "libinput"
[    86.868] (II) systemd-logind: releasing fd for 13:65
[    86.888] (II) UnloadModule: "libinput"
[    86.888] (II) systemd-logind: releasing fd for 13:77
[    87.024] (II) UnloadModule: "libinput"
[    87.024] (II) systemd-logind: releasing fd for 13:69
[    87.048] (II) UnloadModule: "libinput"
[    87.048] (II) systemd-logind: releasing fd for 13:68
[    87.072] (II) UnloadModule: "libinput"
[    87.072] (II) systemd-logind: releasing fd for 13:72
[    87.097] (II) UnloadModule: "libinput"
[    87.097] (II) systemd-logind: releasing fd for 13:70
[    87.524] (WW) xf86CloseConsole: KDSETMODE failed: Input/output error
[    87.524] (WW) xf86CloseConsole: VT_GETMODE failed: Input/output error
[    87.524] (WW) xf86CloseConsole: VT_ACTIVATE failed: Input/output error
[    88.975] (II) Server terminated successfully (0). Closing log file.
 


ps: je pense a un bug de debian (plus spécialement du noyau 4.8 ) mais sans certitude , voir ce que les autres membres en pense hmm

  Je sais pas si c'est ça car j'ai vu sur des forum des problèmes similaire a propos du edid et de kms : 
https://www.osadl.org/Single-View.111+M … b3b.0.html
https://bbs.archlinux.org/viewtopic.php?id=208088
https://wiki.archlinux.org/index.php/ke … s_and_EDID

Qu'en pensez vous ? 

Merci encore d'avance ! Cdlt

Hors ligne

#6 27-01-2017 00:16:15

robert2a
Membre
Lieu : France
Distrib. : Stretch 9
Noyau : Linux 4.9.0-3 4.9.30-2
(G)UI : Mate
Inscription : 15-11-2014

Re : KMS utilise la mauvaise sortie vidéo.

pour le log avec l'écran HDMI ça l air correct a part ceci : (faut que je regarde )


[    87.524] (WW) xf86CloseConsole: KDSETMODE failed: Input/output error
[    87.524] (WW) xf86CloseConsole: VT_GETMODE failed: Input/output error
[    87.524] (WW) xf86CloseConsole: VT_ACTIVATE failed: Input/output error
[    88.975] (II) Server terminated successfully (0). Closing log file.
 


donc l'écran du portable (sans HDMI ) affiche quelque chose jusqu au moment ou GDM3 lance l invite de logging graphique ?
ps: je vai regarder tes liens

si tu fais la combinaison de touches "Ctrl+Alt+F1" tu récupère l'écran ou la machine te semble planté ?

le passage au noyau 4.9 n'a rien changé  roll

il faudrait que quelqu un te guide pour appliquer  nomodeset=1 ou 0   ou modeset = 1 ou 0
j'ai pas trop l habitude sur les options du kernel ( il faudrait que je m habitue a le faire  roll  )

sinon en général je switch sur Mate + lightdm pour confirmer ou pas que le souci est identique et ensuite j en déduis le problème .

si tu désactive KMS tu va utiliser le driver du paquet "xserver-xorg-video-intel"  du serveur X (au lieu du virtuel de KMS)

si quelqu un veut bien te guider pour le désactiver , soit par le menu de grub soit dans les options du noyau ça serait sympa . (pour faire un test )

Dernière modification par robert2a (27-01-2017 00:37:08)

En ligne

#7 27-01-2017 10:34:23

TheoBz
Membre
Lieu : Grenoble
Distrib. : Stretch
Noyau : 4.8
(G)UI : Gnome3
Inscription : 01-12-2016
Site Web

Re : KMS utilise la mauvaise sortie vidéo.

donc l'écran du portable (sans HDMI ) affiche quelque chose jusqu au moment ou GDM3 lance l invite de logging graphique ?



Oui mais sans X (et même avec mate & ldm) aussi il y a rien qui s'affiche (par contre ça fonctionne avec xfce apparemment) sauf en nomodeset (le mode recovery de debian (sans X ect) il a aussi besoin de nomodeset pour se lancer) (c'est pour ça que je pense que ça vient de KMS: mais oui regarde les liens j'y ai trouvé pas mal de trucs intéressants)

si tu fais la combinaison de touches "Ctrl+Alt+F1" tu récupère l'écran ou la machine te semble planté ?



La machine à l'air complémentent planté j'ai pas de retour du noyau (Ctrl+Alt+F1, Ctrl+Alt+Del)

sinon en général je switch sur Mate + lightdm pour confirmer ou pas que le souci est identique et ensuite j en déduis le problème .



J'ai testé avec Mate et ça n'a pas fonctionné et avec xfce qui lui a fonctionné mais vu que gnome fonctionne quand la sortie HDMI est branché j'ai vraiment l'impression que ça vient de KMS.

si tu désactive KMS tu va utiliser le driver du paquet "xserver-xorg-video-intel"  du serveur X (au lieu du virtuel de KMS)



Pour le lancement de debian avec X en nomodeset j'ai pas testé mais si il y a des log je les poste ce soir. Peut être voir aussi le kern.log peut être ?

EDIT


Voila les log du lancement de X en nomodeset (mais X ce configure automatiquement)

[   311.511] (--) Log file renamed from "/var/lib/gdm3/.local/share/xorg/Xorg.pid-13270.log" to "/var/lib/gdm3/.local/share/xorg/Xorg.0.log"
[   311.513]
X.Org X Server 1.19.0
Release Date: 2016-11-15
[   311.513] X Protocol Version 11, Revision 0
[   311.513] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[   311.513] Current Operating System: Linux debian 4.9.0-1-amd64 #1 SMP Debian 4.9.2-2 (2017-01-12) x86_64
[   311.513] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-1-amd64 root=UUID=e4567d2f-3bb1-4aa3-8087-22b584e7e22f ro nomodeset
[   311.513] Build Date: 16 December 2016  07:30:27PM
[   311.513] xorg-server 2:1.19.0-3 (https://www.debian.org/support)
[   311.513] Current version of pixman: 0.34.0
[   311.513]  Before reporting problems, check http://wiki.x.org
  to make sure that you have the latest version.
[   311.513] Markers: (--) probed, (**) from config file, (==) default setting,
  (++) from command line, (!!) notice, (II) informational,
  (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   311.513] (==) Log file: "/var/lib/gdm3/.local/share/xorg/Xorg.0.log", Time: Fri Jan 27 19:03:55 2017
[   311.514] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   311.514] (==) No Layout section.  Using the first Screen section.
[   311.514] (==) No screen section available. Using defaults.
[   311.514] (**) |-->Screen "Default Screen Section" (0)
[   311.515] (**) |   |-->Monitor "<default monitor>"
[   311.515] (==) No monitor specified for screen "Default Screen Section".
  Using a default monitor configuration.
[   311.515] (==) Automatically adding devices
[   311.515] (==) Automatically enabling devices
[   311.515] (==) Automatically adding GPU devices
[   311.515] (==) Max clients allowed: 256, resource mask: 0x1fffff
[   311.515] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[   311.515]  Entry deleted from font path.
[   311.515] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[   311.515]  Entry deleted from font path.
[   311.515] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[   311.515]  Entry deleted from font path.
[   311.515] (WW) The directory "/usr/share/fonts/X11/Type1" does not exist.
[   311.515]  Entry deleted from font path.
[   311.515] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[   311.515]  Entry deleted from font path.
[   311.515] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[   311.515]  Entry deleted from font path.
[   311.515] (==) FontPath set to:
  /usr/share/fonts/X11/misc,
  built-ins
[   311.516] (==) ModulePath set to "/usr/lib/xorg/modules"
[   311.516] (II) The server relies on udev to provide the list of input devices.
  If no devices become available, reconfigure udev or disable AutoAddDevices.
[   311.516] (II) Loader magic: 0x561ea4b2be00
[   311.516] (II) Module ABI versions:
[   311.516]  X.Org ANSI C Emulation: 0.4
[   311.516]  X.Org Video Driver: 23.0
[   311.516]  X.Org XInput driver : 24.1
[   311.516]  X.Org Server Extension : 10.0
[   311.518] (++) using VT number 1

[   311.523] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c505
[   311.525] (--) PCI:*(0:0:2:0) 8086:22b1:1028:06ac rev 33, Mem @ 0x90000000/16777216, 0x80000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[   311.525] (II) LoadModule: "glx"
[   311.526] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   311.529] (II) Module glx: vendor="X.Org Foundation"
[   311.529]  compiled for 1.19.0, module version = 1.0.0
[   311.529]  ABI class: X.Org Server Extension, version 10.0
[   311.529] (==) Matched modesetting as autoconfigured driver 0
[   311.529] (==) Matched fbdev as autoconfigured driver 1
[   311.529] (==) Matched vesa as autoconfigured driver 2
[   311.529] (==) Assigned the driver to the xf86ConfigLayout
[   311.529] (II) LoadModule: "modesetting"
[   311.529] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[   311.530] (II) Module modesetting: vendor="X.Org Foundation"
[   311.530]  compiled for 1.19.0, module version = 1.19.0
[   311.530]  Module class: X.Org Video Driver
[   311.530]  ABI class: X.Org Video Driver, version 23.0
[   311.530] (II) LoadModule: "fbdev"
[   311.530] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[   311.530] (II) Module fbdev: vendor="X.Org Foundation"
[   311.530]  compiled for 1.19.0, module version = 0.4.4
[   311.531]  Module class: X.Org Video Driver
[   311.531]  ABI class: X.Org Video Driver, version 23.0
[   311.531] (II) LoadModule: "vesa"
[   311.531] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[   311.531] (II) Module vesa: vendor="X.Org Foundation"
[   311.531]  compiled for 1.19.0, module version = 2.3.4
[   311.531]  Module class: X.Org Video Driver
[   311.531]  ABI class: X.Org Video Driver, version 23.0
[   311.531] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[   311.531] (II) FBDEV: driver for framebuffer: fbdev
[   311.531] (II) VESA: driver for VESA chipsets: vesa
[   311.532] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[   311.532] (EE) open /dev/dri/card0: No such file or directory
[   311.532] (WW) Falling back to old probe method for modesetting
[   311.532] (EE) open /dev/dri/card0: No such file or directory
[   311.532] (II) Loading sub module "fbdevhw"
[   311.532] (II) LoadModule: "fbdevhw"
[   311.532] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[   311.532] (II) Module fbdevhw: vendor="X.Org Foundation"
[   311.532]  compiled for 1.19.0, module version = 0.0.2
[   311.532]  ABI class: X.Org Video Driver, version 23.0
[   311.533] (EE) open /dev/fb0: Permission denied
[   311.533] (WW) Falling back to old probe method for fbdev
[   311.533] (II) Loading sub module "fbdevhw"
[   311.533] (II) LoadModule: "fbdevhw"
[   311.533] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[   311.533] (II) Module fbdevhw: vendor="X.Org Foundation"
[   311.533]  compiled for 1.19.0, module version = 0.0.2
[   311.533]  ABI class: X.Org Video Driver, version 23.0
[   311.533] (EE) open /dev/fb0: Permission denied
[   311.533] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[   311.533] (EE) Screen 0 deleted because of no matching config section.
[   311.533] (II) UnloadModule: "modesetting"
[   311.533] (EE) Screen 0 deleted because of no matching config section.
[   311.533] (II) UnloadModule: "fbdev"
[   311.533] (II) UnloadSubModule: "fbdevhw"
[   311.534] (II) Loading sub module "vbe"
[   311.534] (II) LoadModule: "vbe"
[   311.534] (II) Loading /usr/lib/xorg/modules/libvbe.so
[   311.534] (II) Module vbe: vendor="X.Org Foundation"
[   311.534]  compiled for 1.19.0, module version = 1.1.0
[   311.534]  ABI class: X.Org Video Driver, version 23.0
[   311.534] (II) Loading sub module "int10"
[   311.534] (II) LoadModule: "int10"
[   311.534] (II) Loading /usr/lib/xorg/modules/libint10.so
[   311.534] (II) Module int10: vendor="X.Org Foundation"
[   311.534]  compiled for 1.19.0, module version = 1.0.0
[   311.534]  ABI class: X.Org Video Driver, version 23.0
[   311.534] (II) VESA(0): initializing int10
[   311.536] (EE) VESA(0): Cannot read int vect
[   311.536] (II) UnloadModule: "vesa"
[   311.536] (II) UnloadSubModule: "int10"
[   311.536] (II) Unloading int10
[   311.536] (II) UnloadSubModule: "vbe"
[   311.536] (II) Unloading vbe
[   311.536] (EE) Screen(s) found, but none have a usable configuration.
[   311.536] (EE)
Fatal server error:
[   311.536] (EE) no screens found(EE)
[   311.536] (EE)
Please consult the The X.Org Foundation support
   at http://wiki.x.org
 for help.
[   311.536] (EE) Please also check the log file at "/var/lib/gdm3/.local/share/xorg/Xorg.0.log" for additional information.
[   311.536] (EE)
[   311.547] (EE) Server terminated with error (1). Closing log file.
 



Puis voila aussi quelques liens que j'ai trouvé aujourd'hui :

http://kodi.wiki/view/Creating_and_usin … _xorg.conf
https://wiki.archlinux.org/index.php/Ke … _KMS_start

Je test le lancement avec les les pilotes intel (xserver-xorg-video-intel) dans la soirée.

Dernière modification par TheoBz (27-01-2017 20:19:16)

Hors ligne

#8 28-01-2017 17:35:57

robert2a
Membre
Lieu : France
Distrib. : Stretch 9
Noyau : Linux 4.9.0-3 4.9.30-2
(G)UI : Mate
Inscription : 15-11-2014

Re : KMS utilise la mauvaise sortie vidéo.

c'est dingue ce truc , je suis ton post mais je comprends comment c'est possible d activer une sortie vidéo virtuelle alors qu' avec 2 écrans tout est correct  scratchhead.gif

En ligne

Pied de page des forums