Bonjour,
C'est cela nettoyer les paquets xorg inutiles. Je me suis mal exprimé encore...
Quant à l'ordi c'est le ldlc mercure de base qui est effectivement assez récent. Comme j'utilise ce portable pour le boulot, je voulais quelque chose de très stable, et mettre jessie avec les backports j'avoue que je n'aime pas trop, bref et il me fallait un noyau très récent. En attendant stretch, j'ai mis ubuntu dernière du nom, je triche un peu ok. Mais dès que stretch ok je bascule. Je ne comprends pas trop la consommation de base en ram d'ubuntu 2 fois plus élevé qu'une installation de jessie pour une même installation
Sinon, j'ai regardé ce fichier qui est long comme mon bras :
[ 32.071]
X.Org X Server 1.18.4
Release Date: 2016-07-19
[ 32.071] X Protocol Version 11, Revision 0
[ 32.071] Build Operating System: Linux 4.4.0-45-generic x86_64 Ubuntu
[ 32.071] Current Operating System: Linux tirith 4.8.0-34-generic #36-Ubuntu SMP Wed Dec 21 17:24:18 UTC 2016 x86_64
[ 32.071] Kernel command line: BOOT_IMAGE=/vmlinuz-4.8.0-34-generic.efi.signed root=/dev/mapper/tirith--vg-root ro
[ 32.072] Build Date: 02 November 2016 10:06:55PM
[ 32.072] xorg-server 2:1.18.4-1ubuntu6.1 (For technical support please see http://www.ubuntu.com/support)
[ 32.072] Current version of pixman: 0.33.6
[ 32.072] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 32.072] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 32.072] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Feb 10 19:52:32 2017
[ 32.072] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 32.073] (==) No Layout section. Using the first Screen section.
[ 32.073] (==) No screen section available. Using defaults.
[ 32.073] (**) |-->Screen "Default Screen Section" (0)
[ 32.073] (**) | |-->Monitor "<default monitor>"
[ 32.074] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 32.074] (==) Automatically adding devices
[ 32.074] (==) Automatically enabling devices
[ 32.074] (==) Automatically adding GPU devices
[ 32.074] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 32.074] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 32.074] Entry deleted from font path.
[ 32.074] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 32.074] Entry deleted from font path.
[ 32.074] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 32.074] Entry deleted from font path.
[ 32.074] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 32.074] Entry deleted from font path.
[ 32.074] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 32.074] Entry deleted from font path.
[ 32.074] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 32.074] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 32.074] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 32.074] (II) Loader magic: 0x55adc5d61020
[ 32.074] (II) Module ABI versions:
[ 32.074] X.Org ANSI C Emulation: 0.4
[ 32.074] X.Org Video Driver: 20.0
[ 32.074] X.Org XInput driver : 22.1
[ 32.074] X.Org Server Extension : 9.0
[ 32.075] (++) using VT number 7
[ 32.075] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 32.076] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 32.098] (--) PCI:*(0:0:2:0) 8086:5a85:1558:5151 rev 11, Mem @ 0x90000000/16777216, 0x80000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[ 32.098] (II) LoadModule: "glx"
[ 32.103] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 32.127] (II) Module glx: vendor="X.Org Foundation"
[ 32.128] compiled for 1.18.4, module version = 1.0.0
[ 32.128] ABI class: X.Org Server Extension, version 9.0
[ 32.128] (==) AIGLX enabled
[ 32.128] (==) Matched modesetting as autoconfigured driver 0
[ 32.128] (==) Matched fbdev as autoconfigured driver 1
[ 32.128] (==) Matched vesa as autoconfigured driver 2
[ 32.128] (==) Assigned the driver to the xf86ConfigLayout
[ 32.128] (II) LoadModule: "modesetting"
[ 32.128] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 32.128] (II) Module modesetting: vendor="X.Org Foundation"
[ 32.128] compiled for 1.18.4, module version = 1.18.4
[ 32.128] Module class: X.Org Video Driver
[ 32.128] ABI class: X.Org Video Driver, version 20.0
[ 32.128] (II) LoadModule: "fbdev"
[ 32.128] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 32.129] (II) Module fbdev: vendor="X.Org Foundation"
[ 32.129] compiled for 1.18.1, module version = 0.4.4
[ 32.129] Module class: X.Org Video Driver
[ 32.129] ABI class: X.Org Video Driver, version 20.0
[ 32.129] (II) LoadModule: "vesa"
[ 32.129] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 32.129] (II) Module vesa: vendor="X.Org Foundation"
[ 32.129] compiled for 1.18.1, module version = 2.3.4
[ 32.129] Module class: X.Org Video Driver
[ 32.129] ABI class: X.Org Video Driver, version 20.0
[ 32.129] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 32.129] (II) FBDEV: driver for framebuffer: fbdev
[ 32.129] (II) VESA: driver for VESA chipsets: vesa
[ 32.156] (II) modeset(0): using drv /dev/dri/card0
[ 32.156] (WW) Falling back to old probe method for fbdev
[ 32.156] (II) Loading sub module "fbdevhw"
[ 32.156] (II) LoadModule: "fbdevhw"
[ 32.157] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 32.157] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 32.157] compiled for 1.18.4, module version = 0.0.2
[ 32.157] ABI class: X.Org Video Driver, version 20.0
[ 32.157] (WW) Falling back to old probe method for vesa
[ 32.157] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 32.157] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 32.157] (==) modeset(0): RGB weight 888
[ 32.157] (==) modeset(0): Default visual is TrueColor
[ 32.157] (II) Loading sub module "glamoregl"
[ 32.157] (II) LoadModule: "glamoregl"
[ 32.157] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 32.174] (II) Module glamoregl: vendor="X.Org Foundation"
[ 32.174] compiled for 1.18.4, module version = 1.0.0
[ 32.174] ABI class: X.Org ANSI C Emulation, version 0.4
[ 32.174] (II) glamor: OpenGL accelerated X.org driver based.
[ 32.252] (II) glamor: EGL version 1.4 (DRI2):
[ 32.264] (II) modeset(0): glamor initialized
[ 32.265] (II) modeset(0): Output eDP-1 has no monitor section
[ 32.268] (II) modeset(0): Output HDMI-1 has no monitor section
[ 32.270] (II) modeset(0): Output DP-1 has no monitor section
[ 32.271] (II) modeset(0): EDID for output eDP-1
[ 32.271] (II) modeset(0): Manufacturer: CMN Model: 1132 Serial#: 0
[ 32.271] (II) modeset(0): Year: 2013 Week: 19
[ 32.271] (II) modeset(0): EDID Version: 1.4
[ 32.271] (II) modeset(0): Digital Display Input
[ 32.271] (II) modeset(0): 6 bits per channel
[ 32.271] (II) modeset(0): Digital interface is DisplayPort
[ 32.271] (II) modeset(0): Max Image Size [cm]: horiz.: 26 vert.: 14
[ 32.271] (II) modeset(0): Gamma: 2.20
[ 32.271] (II) modeset(0): No DPMS capabilities specified
[ 32.271] (II) modeset(0): Supported color encodings: RGB 4:4:4
[ 32.271] (II) modeset(0): First detailed timing is preferred mode
[ 32.271] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[ 32.271] (II) modeset(0): redX: 0.570 redY: 0.333 greenX: 0.325 greenY: 0.582
[ 32.271] (II) modeset(0): blueX: 0.160 blueY: 0.144 whiteX: 0.313 whiteY: 0.329
[ 32.272] (II) modeset(0): Manufacturer's mask: 0
[ 32.272] (II) modeset(0): Supported detailed timing:
[ 32.272] (II) modeset(0): clock: 76.4 MHz Image Size: 256 x 144 mm
[ 32.272] (II) modeset(0): h_active: 1366 h_sync: 1502 h_sync_end 1532 h_blank_end 1592 h_border: 0
[ 32.272] (II) modeset(0): v_active: 768 v_sync: 776 v_sync_end 788 v_blanking: 800 v_border: 0
[ 32.272] (II) modeset(0): N116BGE-EA2
[ 32.272] (II) modeset(0): CMN
[ 32.272] (II) modeset(0): N116BGE-EA2
[ 32.272] (II) modeset(0): EDID (in hex):
[ 32.272] (II) modeset(0): 00ffffffffffff000dae321100000000
[ 32.272] (II) modeset(0): 13170104951a0e780214359255539529
[ 32.272] (II) modeset(0): 24505400000001010101010101010101
[ 32.272] (II) modeset(0): 010101010101da1d56e250002030881e
[ 32.272] (II) modeset(0): 8c00009010000018000000fe004e3131
[ 32.272] (II) modeset(0): 364247452d4541320a20000000fe0043
[ 32.272] (II) modeset(0): 4d4e0a202020202020202020000000fe
[ 32.272] (II) modeset(0): 004e3131364247452d4541320a200048
[ 32.272] (II) modeset(0): Printing probed modes for output eDP-1
[ 32.272] (II) modeset(0): Modeline "1366x768"x60.0 76.42 1366 1502 1532 1592 768 776 788 800 -hsync -vsync (48.0 kHz eP)
[ 32.272] (II) modeset(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz d)
[ 32.272] (II) modeset(0): Modeline "1360x768"x60.0 72.00 1360 1408 1440 1520 768 771 781 790 +hsync -vsync (47.4 kHz d)
[ 32.272] (II) modeset(0): Modeline "1024x768"x120.1 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[ 32.272] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 32.272] (II) modeset(0): Modeline "960x720"x120.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[ 32.272] (II) modeset(0): Modeline "928x696"x120.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[ 32.272] (II) modeset(0): Modeline "896x672"x120.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[ 32.272] (II) modeset(0): Modeline "960x600"x120.0 77.00 960 984 1000 1040 600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[ 32.272] (II) modeset(0): Modeline "960x540"x120.0 69.25 960 984 1000 1040 540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[ 32.272] (II) modeset(0): Modeline "800x600"x120.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[ 32.272] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 32.272] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 32.272] (II) modeset(0): Modeline "840x525"x120.0 73.12 840 892 980 1120 525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[ 32.272] (II) modeset(0): Modeline "840x525"x119.8 59.50 840 864 880 920 525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[ 32.272] (II) modeset(0): Modeline "800x512"x120.3 51.56 800 800 828 832 512 512 514 515 doublescan +hsync +vsync (62.0 kHz d)
[ 32.272] (II) modeset(0): Modeline "700x525"x120.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[ 32.272] (II) modeset(0): Modeline "640x512"x120.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[ 32.272] (II) modeset(0): Modeline "720x450"x119.8 53.25 720 760 836 952 450 451 454 467 doublescan -hsync +vsync (55.9 kHz d)
[ 32.272] (II) modeset(0): Modeline "640x480"x120.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[ 32.272] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 32.272] (II) modeset(0): Modeline "680x384"x119.6 42.38 680 716 784 888 384 385 390 399 doublescan -hsync +vsync (47.7 kHz d)
[ 32.272] (II) modeset(0): Modeline "680x384"x119.9 36.00 680 704 720 760 384 385 390 395 doublescan +hsync -vsync (47.4 kHz d)
[ 32.272] (II) modeset(0): Modeline "576x432"x120.1 40.81 576 608 668 760 432 432 434 447 doublescan -hsync +vsync (53.7 kHz d)
[ 32.272] (II) modeset(0): Modeline "512x384"x120.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 32.272] (II) modeset(0): Modeline "400x300"x120.6 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[ 32.272] (II) modeset(0): Modeline "400x300"x112.7 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[ 32.272] (II) modeset(0): Modeline "320x240"x120.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 32.275] (II) modeset(0): EDID for output HDMI-1
[ 32.277] (II) modeset(0): EDID for output DP-1
[ 32.277] (II) modeset(0): Output eDP-1 connected
[ 32.277] (II) modeset(0): Output HDMI-1 disconnected
[ 32.278] (II) modeset(0): Output DP-1 disconnected
[ 32.278] (II) modeset(0): Using exact sizes for initial modes
[ 32.278] (II) modeset(0): Output eDP-1 using initial mode 1366x768 +0+0
[ 32.278] (II) modeset(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 32.278] (==) modeset(0): DPI set to (96, 96)
[ 32.278] (II) Loading sub module "fb"
[ 32.278] (II) LoadModule: "fb"
[ 32.278] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 32.278] (II) Module fb: vendor="X.Org Foundation"
[ 32.278] compiled for 1.18.4, module version = 1.0.0
[ 32.278] ABI class: X.Org ANSI C Emulation, version 0.4
[ 32.278] (II) UnloadModule: "fbdev"
[ 32.279] (II) Unloading fbdev
[ 32.279] (II) UnloadSubModule: "fbdevhw"
[ 32.279] (II) Unloading fbdevhw
[ 32.279] (II) UnloadModule: "vesa"
[ 32.279] (II) Unloading vesa
[ 32.279] (==) Depth 24 pixmap format is 32 bpp
[ 32.556] (==) modeset(0): Backing store enabled
[ 32.556] (==) modeset(0): Silken mouse enabled
[ 32.559] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 32.560] (==) modeset(0): DPMS enabled
[ 32.560] (EE) modeset(0): [DRI2] No driver mapping found for PCI device 0x8086 / 0x5a85
[ 32.560] (EE) modeset(0): Failed to initialize the DRI2 extension.
[ 32.606] (--) RandR disabled
[ 32.612] (II) SELinux: Disabled on system
[ 32.614] (II) AIGLX: Screen 0 is not DRI2 capable
[ 32.614] (EE) AIGLX: reverting to software rendering
[ 32.767] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 32.768] (II) AIGLX: Loaded and initialized swrast
[ 32.768] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 32.808] (II) modeset(0): Damage tracking initialized
[ 32.808] (II) modeset(0): Setting screen physical size to 361 x 203
[ 32.925] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 32.925] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 32.925] (II) LoadModule: "evdev"
[ 32.926] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 32.928] (II) Module evdev: vendor="X.Org Foundation"
[ 32.928] compiled for 1.18.3, module version = 2.10.2
[ 32.928] Module class: X.Org XInput Driver
[ 32.928] ABI class: X.Org XInput driver, version 22.1
[ 32.928] (II) Using input driver 'evdev' for 'Power Button'
[ 32.928] (**) Power Button: always reports core events
[ 32.929] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 32.929] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 32.929] (--) evdev: Power Button: Found keys
[ 32.929] (II) evdev: Power Button: Configuring as keyboard
[ 32.929] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 32.929] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 32.929] (**) Option "xkb_rules" "evdev"
[ 32.929] (**) Option "xkb_model" "pc105"
[ 32.929] (**) Option "xkb_layout" "fr"
[ 32.958] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 32.958] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 32.958] (II) Using input driver 'evdev' for 'Video Bus'
[ 32.958] (**) Video Bus: always reports core events
[ 32.958] (**) evdev: Video Bus: Device: "/dev/input/event5"
[ 32.958] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 32.958] (--) evdev: Video Bus: Found keys
[ 32.958] (II) evdev: Video Bus: Configuring as keyboard
[ 32.958] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11/event5"
[ 32.958] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 32.958] (**) Option "xkb_rules" "evdev"
[ 32.958] (**) Option "xkb_model" "pc105"
[ 32.958] (**) Option "xkb_layout" "fr"
[ 32.959] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 32.959] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 32.959] (II) Using input driver 'evdev' for 'Power Button'
[ 32.959] (**) Power Button: always reports core events
[ 32.959] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 32.959] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 32.959] (--) evdev: Power Button: Found keys
[ 32.959] (II) evdev: Power Button: Configuring as keyboard
[ 32.959] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 32.959] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 32.959] (**) Option "xkb_rules" "evdev"
[ 32.959] (**) Option "xkb_model" "pc105"
[ 32.959] (**) Option "xkb_layout" "fr"
[ 32.960] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 32.960] (II) No input driver specified, ignoring this device.
[ 32.960] (II) This device may have been added with another device file.
[ 32.960] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 32.960] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 32.960] (II) Using input driver 'evdev' for 'Sleep Button'
[ 32.961] (**) Sleep Button: always reports core events
[ 32.961] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[ 32.961] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 32.961] (--) evdev: Sleep Button: Found keys
[ 32.961] (II) evdev: Sleep Button: Configuring as keyboard
[ 32.961] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[ 32.961] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 32.961] (**) Option "xkb_rules" "evdev"
[ 32.961] (**) Option "xkb_model" "pc105"
[ 32.961] (**) Option "xkb_layout" "fr"
[ 32.962] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event8)
[ 32.962] (II) No input driver specified, ignoring this device.
[ 32.962] (II) This device may have been added with another device file.
[ 32.962] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event9)
[ 32.962] (II) No input driver specified, ignoring this device.
[ 32.962] (II) This device may have been added with another device file.
[ 32.962] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event10)
[ 32.963] (II) No input driver specified, ignoring this device.
[ 32.963] (II) This device may have been added with another device file.
[ 32.963] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event11)
[ 32.963] (II) No input driver specified, ignoring this device.
[ 32.963] (II) This device may have been added with another device file.
[ 32.963] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event12)
[ 32.963] (II) No input driver specified, ignoring this device.
[ 32.963] (II) This device may have been added with another device file.
[ 32.964] (II) config/udev: Adding input device Chicony USB2.0 Camera (/dev/input/event7)
[ 32.964] (**) Chicony USB2.0 Camera: Applying InputClass "evdev keyboard catchall"
[ 32.964] (II) Using input driver 'evdev' for 'Chicony USB2.0 Camera'
[ 32.964] (**) Chicony USB2.0 Camera: always reports core events
[ 32.964] (**) evdev: Chicony USB2.0 Camera: Device: "/dev/input/event7"
[ 32.964] (--) evdev: Chicony USB2.0 Camera: Vendor 0x4f2 Product 0xb59d
[ 32.964] (--) evdev: Chicony USB2.0 Camera: Found keys
[ 32.964] (II) evdev: Chicony USB2.0 Camera: Configuring as keyboard
[ 32.964] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/usb1/1-7/1-7:1.0/input/input16/event7"
[ 32.964] (II) XINPUT: Adding extended input device "Chicony USB2.0 Camera" (type: KEYBOARD, id 10)
[ 32.964] (**) Option "xkb_rules" "evdev"
[ 32.964] (**) Option "xkb_model" "pc105"
[ 32.964] (**) Option "xkb_layout" "fr"
[ 32.965] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[ 32.965] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 32.965] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 32.965] (**) AT Translated Set 2 keyboard: always reports core events
[ 32.965] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event4"
[ 32.965] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 32.965] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 32.965] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 32.965] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[ 32.965] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[ 32.965] (**) Option "xkb_rules" "evdev"
[ 32.965] (**) Option "xkb_model" "pc105"
[ 32.965] (**) Option "xkb_layout" "fr"
[ 32.966] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6)
[ 32.966] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 32.966] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 32.966] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 32.966] (II) LoadModule: "synaptics"
[ 32.966] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 32.967] (II) Module synaptics: vendor="X.Org Foundation"
[ 32.967] compiled for 1.18.3, module version = 1.8.3
[ 32.967] Module class: X.Org XInput Driver
[ 32.967] ABI class: X.Org XInput driver, version 22.1
[ 32.967] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 32.967] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 32.967] (**) Option "Device" "/dev/input/event6"
[ 33.020] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 33.020] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5692 (res 66)
[ 33.020] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4680 (res 102)
[ 33.020] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 33.020] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 33.020] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 33.020] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 33.020] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 33.020] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 33.044] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio2/input/input10/event6"
[ 33.044] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[ 33.044] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 33.044] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 33.044] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.037
[ 33.044] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 33.044] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 33.044] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 33.044] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 33.044] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 33.045] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 33.045] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
Si je puis avoir une petite piste,
Je prépare mon installation minimale pour stretch avec seulement ce que j'ai besoin.
Merci
La connaissance est pour l'humanité un magnifique moyen pour s'anéantir elle-même. Nietzsche (1844-1900)