Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#26 23-05-2017 09:49:34

Debian Alain
Membre
Lieu : BREST 29200
Distrib. : DEBIAN 9 STRETCH
Noyau : Linux 4.9.0-3-amd64
(G)UI : GNOME
Inscription : 11-03-2017

Re : ecran hp lp3065

voilà ce que j'obtiens aujourd'hui

1495525360.png

un apt-get update et un apt-get upgrade n'y ont rien changé

par ailleurs , au démarrage , les caractères s'affichent plus gros dans le grub .

je dirai donc que l'état général a empiré pour l'instant .

je viens de résoudre le problème du grub .

$ xrandr


Screen 0: minimum 8 x 8, current 1280 x 800, maximum 32767 x 32767
DP1 disconnected (normal left inverted right x axis y axis)
DP2 disconnected (normal left inverted right x axis y axis)
HDMI1 disconnected primary 1280x800+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
HDMI2 disconnected (normal left inverted right x axis y axis)
VGA1 disconnected (normal left inverted right x axis y axis)
VIRTUAL1 disconnected (normal left inverted right x axis y axis)
  1280x800 (0xb1) 71.000MHz
        h: width  1280 start 1328 end 1360 total 1440 skew    0 clock  49.31KHz
        v: height  800 start  803 end  809 total  823           clock  59.91Hz

Dernière modification par Debian Alain (23-05-2017 10:55:49)

Hors ligne

#27 23-05-2017 10:20:35

chad
Membre
Lieu : Rennes
Distrib. : debian 9.0
Noyau : 4.9.0-2-amd64
(G)UI : kde plasma 5.8.6
Inscription : 05-02-2017

Re : ecran hp lp3065

quelle histoire !!!

t'as essayé la procedure e 1.3 du lien page précedente ?

pour forcer l'affichage

Dernière modification par chad (23-05-2017 10:21:03)

Hors ligne

#28 23-05-2017 10:34:06

Debian Alain
Membre
Lieu : BREST 29200
Distrib. : DEBIAN 9 STRETCH
Noyau : Linux 4.9.0-3-amd64
(G)UI : GNOME
Inscription : 11-03-2017

Re : ecran hp lp3065

$ sudo xrandr --newmode $(gtf 1280 1024 60 | sed -ne 's/"//g;s/ Modeline //p')


[sudo] password for alain:
X Error of failed request:  BadName (named color or font does not exist)
  Major opcode of failed request:  140 (RANDR)
  Minor opcode of failed request:  16 (RRCreateMode)
  Serial number of failed request:  36
  Current serial number in output stream:  36



cat /usr/share/doc/xserver-xorg-video-intel/xorg.conf


Section "Device"
  Identifier "Intel"
  Driver "intel"
# Option "AccelMethod" "uxa"
EndSection

Dernière modification par Debian Alain (23-05-2017 11:44:57)

Hors ligne

#29 23-05-2017 11:26:16

chalu
Modératrice
Lieu : Anjou
Distrib. : Debian Jessie (saveur Handylinux 2.5) à jour
Noyau : Linux 3.16.0-4-amd64
(G)UI : XFCE - xfwm4
Inscription : 11-03-2016

Re : ecran hp lp3065

Debian Alain a écrit :

HDMI1 disconnected primary 1280x800+0+0 (normal left inverted right x axis y axis) 0mm x 0mm


C'est bizarre, toutes les sorties sont avec "disconnected"

Edit : tu as 3 entrées DVI sur ton écran, tu les as toutes testées et c'est le même comportement ?
Je ne comprends pas que l'installation de xserver-xorg-intel produise cet affichage avec toutes les sorties déconnectées alors qu'anvant on avait HDMI-0


Bien débuter sur Debian :
->Les cahiers du débutant + le wiki Découvrir les principales commandes Linux
-> Le projet DFlinux (DebianFacileLinux) pour débutants: ISOs (i386 et amd64) basées sur Debian Jessie avec des outils facilitants
-> Retours et avis sur DFLinux dans ce fil

Hors ligne

#30 23-05-2017 11:40:19

chad
Membre
Lieu : Rennes
Distrib. : debian 9.0
Noyau : 4.9.0-2-amd64
(G)UI : kde plasma 5.8.6
Inscription : 05-02-2017

Re : ecran hp lp3065

à tester en hdmi et en vga (le vga peut sortir du full hd, analogique certe mais hd quand meme)

Hors ligne

#31 23-05-2017 11:47:12

chalu
Modératrice
Lieu : Anjou
Distrib. : Debian Jessie (saveur Handylinux 2.5) à jour
Noyau : Linux 3.16.0-4-amd64
(G)UI : XFCE - xfwm4
Inscription : 11-03-2016

Re : ecran hp lp3065

L'écran ne semble avoir que des connectiques DVI : http://www.ldlc.com/fiche/PB00070985.html
Il faudrait un adaptateur pour le mettre sur une sortie HDMI

Bien débuter sur Debian :
->Les cahiers du débutant + le wiki Découvrir les principales commandes Linux
-> Le projet DFlinux (DebianFacileLinux) pour débutants: ISOs (i386 et amd64) basées sur Debian Jessie avec des outils facilitants
-> Retours et avis sur DFLinux dans ce fil

Hors ligne

#32 23-05-2017 11:47:52

Debian Alain
Membre
Lieu : BREST 29200
Distrib. : DEBIAN 9 STRETCH
Noyau : Linux 4.9.0-3-amd64
(G)UI : GNOME
Inscription : 11-03-2017

Re : ecran hp lp3065

ben non , comprends pas non plus chalu .

Hors ligne

#33 23-05-2017 11:52:10

chad
Membre
Lieu : Rennes
Distrib. : debian 9.0
Noyau : 4.9.0-2-amd64
(G)UI : kde plasma 5.8.6
Inscription : 05-02-2017

Re : ecran hp lp3065

test avec un autre ecran en vga (un vieux qui traine ou ta tv ecran plat) et en hdmi si tu peux voir si ça résoud quelque chose

Hors ligne

#34 23-05-2017 12:03:51

Debian Alain
Membre
Lieu : BREST 29200
Distrib. : DEBIAN 9 STRETCH
Noyau : Linux 4.9.0-3-amd64
(G)UI : GNOME
Inscription : 11-03-2017

Re : ecran hp lp3065

j'ai donné mon écran vga , chad

$ Xorg -version


X.Org X Server 1.16.4
Release Date: 2014-12-20
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
Current Operating System: Linux debian 4.9.0-0.bpo.2-amd64 #1 SMP Debian 4.9.18-1~bpo8+1 (2017-04-10) x86_64
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-0.bpo.2-amd64 root=UUID=1432ba42-31c4-4ca6-a952-e96043b05bbf ro noacpi
Build Date: 11 February 2015  12:32:02AM
xorg-server 2:1.16.4-1 (http://www.debian.org/support)
Current version of pixman: 0.32.6
  Before reporting problems, check http://wiki.x.org
  to make sure that you have the latest version.

Dernière modification par Debian Alain (23-05-2017 12:42:33)

Hors ligne

#35 23-05-2017 12:51:39

chalu
Modératrice
Lieu : Anjou
Distrib. : Debian Jessie (saveur Handylinux 2.5) à jour
Noyau : Linux 3.16.0-4-amd64
(G)UI : XFCE - xfwm4
Inscription : 11-03-2016

Re : ecran hp lp3065

Est ce que tu peux tester en utilisant un LiveUSB DFlinux ou Ubuntu peu importe et donner le retour de xrandr pour voir si c'est le même genre de retour qu'avec le Système Debian installé ?

Bien débuter sur Debian :
->Les cahiers du débutant + le wiki Découvrir les principales commandes Linux
-> Le projet DFlinux (DebianFacileLinux) pour débutants: ISOs (i386 et amd64) basées sur Debian Jessie avec des outils facilitants
-> Retours et avis sur DFLinux dans ce fil

Hors ligne

#36 23-05-2017 13:21:12

Debian Alain
Membre
Lieu : BREST 29200
Distrib. : DEBIAN 9 STRETCH
Noyau : Linux 4.9.0-3-amd64
(G)UI : GNOME
Inscription : 11-03-2017

Re : ecran hp lp3065

sous debian 8.6 live

$ xrandr


Screen 0: minimum 320 x 200, current 1280 x 800, maximum 8192 x 8192
VGA1 disconnected (normal left inverted right x axis y axis)
HDMI1 disconnected 1280x800+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
HDMI2 disconnected (normal left inverted right x axis y axis)
DP1 disconnected (normal left inverted right x axis y axis)
DP2 disconnected (normal left inverted right x axis y axis)
  1280x800 (0x47) 71.000MHz
        h: width  1280 start 1328 end 1360 total 1440 skew    0 clock  49.31KHz
        v: height  800 start  803 end  809 total  823           clock  59.91Hz
 

Hors ligne

#37 23-05-2017 13:48:46

èfpé
Membre
Inscription : 10-07-2016

Re : ecran hp lp3065

Hello,

Debian Alain si tu penses que l'installation du paquet xserver-xorg-video-intel a empiré les choses, désinstalle-le, avant de le faire regarde tout de même quel pilote est effectivement utilisé :

lspci -k | grep -A2 VGA

puis

apt-get remove --purge xserver-xorg-video-intel


Les retours donnés par xrandr sont pour le moins étonnants, et semblent différents selon le noyau utilisé (4.9 vs 3.16) ; tu peux profiter de cette session Live pour faire des tests... alors si j'ai bien compris, l'objectif est la « résolution » 1920x1200 à 60 Hz ?

gtf 1920 1200 60

# 1920x1200 @ 60.00 Hz (GTF) truc
Modeline "1920x1200_60.00" machin


xrandr --newmode "1920x1200_60.00" machin


xrandr --addmode HDMI-0 1920x1200_60.00


xrandr --output HDMI-0 --mode 1920x1200_60.00


Le nom de la sortie est à adapter bien sûr, mais c'est le principe... tu peux à tout moment voir où tu en es (et accessoirement comprendre ce que tu fais) avec cette simple commande :

xrandr


(À noter que la page de manuel de la commande xrandr est consistante, intéressante, et en français smile)

Dernière modification par èfpé (23-05-2017 16:08:46)

Hors ligne

#38 23-05-2017 15:42:26

Debian Alain
Membre
Lieu : BREST 29200
Distrib. : DEBIAN 9 STRETCH
Noyau : Linux 4.9.0-3-amd64
(G)UI : GNOME
Inscription : 11-03-2017

Re : ecran hp lp3065

euh , èfpé , je suppose que "machin" est un terme générique passe partout .

mais tu veux dire quoi ?

Modeline "1920x1200_60.00" machin



xrandr --newmode "1920x1200_60.00" machin



???  scratchhead.gif

et puis déjà , première ligne :

$ gvt 1920 1200 60


bash: gvt : commande introuvable



sudo apt-get install gvt


[sudo] password for alain:
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances      
Lecture des informations d'état... Fait
E: Impossible de trouver le paquet gvt



$ Modeline "1920x1200_60.00" machin


bash: Modeline : commande introuvable

Dernière modification par Debian Alain (23-05-2017 16:00:28)

Hors ligne

#39 23-05-2017 15:56:28

èfpé
Membre
Inscription : 10-07-2016

Re : ecran hp lp3065

Re-,

Oui voilà c'est tout à fait ça : machins trucs choses, machins trucs très chouettes (© Serge Gainsbourg) ; exécute la première commande, tu comprendras tout de suite pourquoi je n'ai pas tout copié-collé.

Oups... au temps/autant pour moi... première commande corrigée/rectifiée... je sors, discrètement hmm

Dernière modification par èfpé (23-05-2017 16:06:28)

Hors ligne

#40 23-05-2017 16:07:52

robert2a
Membre
Lieu : France
Distrib. : Stretch 9
Noyau : Linux 4.9.0-3 4.9.30-2
(G)UI : Mate
Inscription : 15-11-2014

Re : ecran hp lp3065

èfpé a écrit :

Re-,

Ok, le CPU est un Intel Core i7-2600 finalement... c'est cohérent avec le reste et l'installation du paquet firmware-misc-nonfree ne servirait à rien, par contre tu peux tenter celle du paquet xserver-xorg-video-intel :

apt-get -t jessie-backports install xserver-xorg-video-intel


(Cela ferait un peu hurler robert2a, mais bon, il n'est pas là alors j'en profite big_smile)



je vous surveille pas de bètises  tongue   lol

En ligne

#41 23-05-2017 16:18:27

Debian Alain
Membre
Lieu : BREST 29200
Distrib. : DEBIAN 9 STRETCH
Noyau : Linux 4.9.0-3-amd64
(G)UI : GNOME
Inscription : 11-03-2017

Re : ecran hp lp3065

je te remercie èfpé . ça a fonctionné .mal. mais ça a fonctionné .

j'ai obtenu un écran noir

reset et me revoilà en 1280

j'ai trouvé ça :

http://support.plugable.com/plugable/to … resolution
http://www.manice.org/scaler/pourquoi-u … video.html
https://fr.wikipedia.org/wiki/Scaler_video

l'air de dire que l'écran ne possède pas de "scaler" donc il ne peut afficher que la résolution maxi ou demie

comme ma carte ne supporte pas la résolution de 2560x1600 ,
l'écran se rabat automatiquement sur la demie - résolution , savoir 1280x800 .

à confirmer mais je pense pas que je me trompe

https://h30434.www3.hp.com/t5/Desktop-V … -p/5082951

Dernière modification par Debian Alain (23-05-2017 16:45:18)

Hors ligne

#42 23-05-2017 17:55:10

chad
Membre
Lieu : Rennes
Distrib. : debian 9.0
Noyau : 4.9.0-2-amd64
(G)UI : kde plasma 5.8.6
Inscription : 05-02-2017

Re : ecran hp lp3065

ça me parait bizarre  il a forcement un down/up scaler sinon il n'afficherait pas la 1280.800

meme les vieux cathodiques en avaient ....

Hors ligne

#43 23-05-2017 18:54:24

èfpé
Membre
Inscription : 10-07-2016

Re : ecran hp lp3065

Re-,

Les liens que tu as dégotés semblent très pertinents et sans appel, Debian Alain ; la doc du LP3065 ne mentionne (p. 22/27) d'ailleurs qu'une « résolution graphique supportée » [2560 x 1600 (60Hz) digital input]. Ce moniteur est assez clairement sur-dimensionné : la « carte graphique » [Intel HD Graphics 2000] supporte théoriquement la « résolution » 2560x1600, mais seule la sortie VGA de la carte mère la supporte également (or j'ai l'impression qu'un adaptateur actif VGA vers DVI-D, ça n'existe pas, mais c'est à confirmer), tu pourrais peut-être obtenir quelques informations supplémentaires avec la commande :

xrandr --verbose


La « résolution » basse au démarrage est probablement due au fait que le pilote intel n'est pas compatible avec KMS (robert2a t'expliquerait ça en long, en large et en travers... c'est un peu son péché mignon wink) ; si tu veux tu peux poster le contenu de ton fichier Xorg.0.log :

cat /var/log/Xorg.0.log


Quoi qu'il en soit, cela devrait rentrer dans l'ordre après désinstallation du paquet cité au post #37 neutral

Dernière modification par èfpé (24-05-2017 12:04:24)

Hors ligne

#44 23-05-2017 19:49:35

robert2a
Membre
Lieu : France
Distrib. : Stretch 9
Noyau : Linux 4.9.0-3 4.9.30-2
(G)UI : Mate
Inscription : 15-11-2014

Re : ecran hp lp3065

chouette , un peu de lecture avec un Xorg.0.log   tongue

si tu est sous gnome regarde plutot dans /home/$user/.local/share/xorg/Xorg.1.log


cat /home/$user/.local/share/xorg/Xorg.1.log
 



nota : toujours regarder la date de fraicheur du log , doit etre a la date du dernier démarrage de la machine

Dernière modification par robert2a (23-05-2017 19:52:46)

En ligne

#45 23-05-2017 21:58:29

Debian Alain
Membre
Lieu : BREST 29200
Distrib. : DEBIAN 9 STRETCH
Noyau : Linux 4.9.0-3-amd64
(G)UI : GNOME
Inscription : 11-03-2017

Re : ecran hp lp3065

alors , je réponds à èfpé  d'abord  :

$ xrandr --verbose


Screen 0: minimum 8 x 8, current 1280 x 800, maximum 32767 x 32767
DP1 disconnected (normal left inverted right x axis y axis)
  Identifier: 0x42
  Timestamp:  45958
  Subpixel:   unknown
  Clones:    
  CRTCs:      0 1
  Transform:  1.000000 0.000000 0.000000
              0.000000 1.000000 0.000000
              0.000000 0.000000 1.000000
             filter:
  Broadcast RGB: Automatic
    supported: Automatic, Full, Limited 16:235
  audio: auto
    supported: force-dvi, off, auto, on
DP2 disconnected (normal left inverted right x axis y axis)
  Identifier: 0x43
  Timestamp:  45958
  Subpixel:   unknown
  Clones:    
  CRTCs:      0 1
  Transform:  1.000000 0.000000 0.000000
              0.000000 1.000000 0.000000
              0.000000 0.000000 1.000000
             filter:
  Broadcast RGB: Automatic
    supported: Automatic, Full, Limited 16:235
  audio: auto
    supported: force-dvi, off, auto, on
HDMI1 disconnected primary 1280x800+0+0 (0xb1) normal (normal left inverted right x axis y axis) 0mm x 0mm
  Identifier: 0x44
  Timestamp:  45958
  Subpixel:   unknown
  Gamma:      1.0:1.0:1.0
  Brightness: 1.0
  Clones:     VGA1
  CRTC:       0
  CRTCs:      0 1
  Transform:  1.000000 0.000000 0.000000
              0.000000 1.000000 0.000000
              0.000000 0.000000 1.000000
             filter:
  _MUTTER_PRESENTATION_OUTPUT: 0
  aspect ratio: Automatic
    supported: Automatic, 4:3, 16:9
  Broadcast RGB: Automatic
    supported: Automatic, Full, Limited 16:235
  audio: auto
    supported: force-dvi, off, auto, on
HDMI2 disconnected (normal left inverted right x axis y axis)
  Identifier: 0x45
  Timestamp:  45958
  Subpixel:   unknown
  Clones:     VGA1
  CRTCs:      0 1
  Transform:  1.000000 0.000000 0.000000
              0.000000 1.000000 0.000000
              0.000000 0.000000 1.000000
             filter:
  aspect ratio: Automatic
    supported: Automatic, 4:3, 16:9
  Broadcast RGB: Automatic
    supported: Automatic, Full, Limited 16:235
  audio: auto
    supported: force-dvi, off, auto, on
VGA1 disconnected (normal left inverted right x axis y axis)
  Identifier: 0x46
  Timestamp:  45958
  Subpixel:   unknown
  Clones:     HDMI1 HDMI2
  CRTCs:      0 1
  Transform:  1.000000 0.000000 0.000000
              0.000000 1.000000 0.000000
              0.000000 0.000000 1.000000
             filter:
VIRTUAL1 disconnected (normal left inverted right x axis y axis)
  Identifier: 0x47
  Timestamp:  45958
  Subpixel:   no subpixels
  Clones:    
  CRTCs:      2
  Transform:  1.000000 0.000000 0.000000
              0.000000 1.000000 0.000000
              0.000000 0.000000 1.000000
             filter:
  1280x800 (0xb1) 71.000MHz
        h: width  1280 start 1328 end 1360 total 1440 skew    0 clock  49.31KHz
        v: height  800 start  803 end  809 total  823           clock  59.91Hz




$ cat /var/log/Xorg.0.log


[    41.711]
X.Org X Server 1.16.4
Release Date: 2014-12-20
[    41.711] X Protocol Version 11, Revision 0
[    41.711] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[    41.711] Current Operating System: Linux debian 4.9.0-0.bpo.2-amd64 #1 SMP Debian 4.9.18-1~bpo8+1 (2017-04-10) x86_64
[    41.711] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-0.bpo.2-amd64 root=UUID=1432ba42-31c4-4ca6-a952-e96043b05bbf ro noacpi
[    41.711] Build Date: 11 February 2015  12:32:02AM
[    41.711] xorg-server 2:1.16.4-1 (http://www.debian.org/support)
[    41.711] Current version of pixman: 0.32.6
[    41.711]  Before reporting problems, check http://wiki.x.org
  to make sure that you have the latest version.
[    41.711] Markers: (--) probed, (**) from config file, (==) default setting,
  (++) from command line, (!!) notice, (II) informational,
  (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    41.711] (==) Log file: "/var/log/Xorg.0.log", Time: Tue May 23 16:12:44 2017
[    41.741] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    41.815] (==) No Layout section.  Using the first Screen section.
[    41.815] (==) No screen section available. Using defaults.
[    41.815] (**) |-->Screen "Default Screen Section" (0)
[    41.815] (**) |   |-->Monitor "<default monitor>"
[    41.816] (==) No monitor specified for screen "Default Screen Section".
  Using a default monitor configuration.
[    41.816] (==) Automatically adding devices
[    41.816] (==) Automatically enabling devices
[    41.816] (==) Automatically adding GPU devices
[    41.916] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    41.917]  Entry deleted from font path.
[    41.953] (==) FontPath set to:
  /usr/share/fonts/X11/misc,
  /usr/share/fonts/X11/100dpi/:unscaled,
  /usr/share/fonts/X11/75dpi/:unscaled,
  /usr/share/fonts/X11/Type1,
  /usr/share/fonts/X11/100dpi,
  /usr/share/fonts/X11/75dpi,
  built-ins
[    41.953] (==) ModulePath set to "/usr/lib/xorg/modules"
[    41.953] (II) The server relies on udev to provide the list of input devices.
  If no devices become available, reconfigure udev or disable AutoAddDevices.
[    41.954] (II) Loader magic: 0x5599a73f8d80
[    41.954] (II) Module ABI versions:
[    41.954]  X.Org ANSI C Emulation: 0.4
[    41.954]  X.Org Video Driver: 18.0
[    41.954]  X.Org XInput driver : 21.0
[    41.954]  X.Org Server Extension : 8.0
[    41.954] (II) xfree86: Adding drm device (/dev/dri/card0)
[    41.956] (--) PCI:*(0:0:2:0) 8086:0102:1043:84ca rev 9, Mem @ 0xf7400000/4194304, 0xe0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[    41.956] (II) LoadModule: "glx"
[    41.979] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    42.555] (II) Module glx: vendor="X.Org Foundation"
[    42.555]  compiled for 1.16.4, module version = 1.0.0
[    42.555]  ABI class: X.Org Server Extension, version 8.0
[    42.555] (==) AIGLX enabled
[    42.555] (==) Matched intel as autoconfigured driver 0
[    42.555] (==) Matched intel as autoconfigured driver 1
[    42.555] (==) Matched modesetting as autoconfigured driver 2
[    42.555] (==) Matched fbdev as autoconfigured driver 3
[    42.555] (==) Matched vesa as autoconfigured driver 4
[    42.555] (==) Assigned the driver to the xf86ConfigLayout
[    42.555] (II) LoadModule: "intel"
[    42.556] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    42.752] (II) Module intel: vendor="X.Org Foundation"
[    42.752]  compiled for 1.16.4, module version = 2.99.917
[    42.752]  Module class: X.Org Video Driver
[    42.752]  ABI class: X.Org Video Driver, version 18.0
[    42.752] (II) LoadModule: "modesetting"
[    42.753] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    42.857] (II) Module modesetting: vendor="X.Org Foundation"
[    42.857]  compiled for 1.16.4, module version = 0.9.0
[    42.857]  Module class: X.Org Video Driver
[    42.857]  ABI class: X.Org Video Driver, version 18.0
[    42.857] (II) LoadModule: "fbdev"
[    42.858] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    42.898] (II) Module fbdev: vendor="X.Org Foundation"
[    42.898]  compiled for 1.15.99.904, module version = 0.4.4
[    42.898]  Module class: X.Org Video Driver
[    42.898]  ABI class: X.Org Video Driver, version 18.0
[    42.898] (II) LoadModule: "vesa"
[    42.898] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    42.923] (II) Module vesa: vendor="X.Org Foundation"
[    42.923]  compiled for 1.15.99.904, module version = 2.3.3
[    42.923]  Module class: X.Org Video Driver
[    42.923]  ABI class: X.Org Video Driver, version 18.0
[    42.923] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
  i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
  915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
  Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
  GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[    42.923] (II) intel: Driver for Intel(R) HD Graphics
[    42.923] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[    42.923] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[    42.923] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    42.923] (II) FBDEV: driver for framebuffer: fbdev
[    42.923] (II) VESA: driver for VESA chipsets: vesa
[    42.923] (++) using VT number 7

[    42.937] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20160919
[    42.937] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.917+git20161206-1~bpo8+1 (Vincent Cheng <vcheng@debian.org>)
[    42.937] (II) intel(0): SNA compiled for use with valgrind
[    42.938] (WW) Falling back to old probe method for modesetting
[    42.938] (WW) Falling back to old probe method for fbdev
[    42.938] (II) Loading sub module "fbdevhw"
[    42.938] (II) LoadModule: "fbdevhw"
[    42.938] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    42.955] (II) Module fbdevhw: vendor="X.Org Foundation"
[    42.955]  compiled for 1.16.4, module version = 0.0.2
[    42.955]  ABI class: X.Org Video Driver, version 18.0
[    42.955] (WW) Falling back to old probe method for vesa
[    42.956] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 2000
[    42.956] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx; using a maximum of 4 threads
[    42.956] (II) intel(0): Creating default Display subsection in Screen section
  "Default Screen Section" for depth/fbbpp 24/32
[    42.956] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    42.956] (==) intel(0): RGB weight 888
[    42.956] (==) intel(0): Default visual is TrueColor
[    42.957] (II) intel(0): Output VGA1 has no monitor section
[    42.957] (II) intel(0): Enabled output VGA1
[    42.957] (II) intel(0): Output HDMI1 has no monitor section
[    42.957] (II) intel(0): Enabled output HDMI1
[    42.957] (II) intel(0): Output HDMI2 has no monitor section
[    42.957] (II) intel(0): Enabled output HDMI2
[    42.957] (II) intel(0): Output DP1 has no monitor section
[    42.957] (II) intel(0): Enabled output DP1
[    42.957] (II) intel(0): Output DP2 has no monitor section
[    42.957] (II) intel(0): Enabled output DP2
[    42.957] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[    42.957] (II) intel(0): Output VIRTUAL1 has no monitor section
[    42.957] (II) intel(0): Enabled output VIRTUAL1
[    42.957] (==) intel(0): TearFree disabled
[    42.958] (==) intel(0): DPI set to (96, 96)
[    42.958] (II) Loading sub module "dri3"
[    42.958] (II) LoadModule: "dri3"
[    42.958] (II) Module "dri3" already built-in
[    42.958] (II) Loading sub module "dri2"
[    42.958] (II) LoadModule: "dri2"
[    42.958] (II) Module "dri2" already built-in
[    42.958] (II) Loading sub module "present"
[    42.958] (II) LoadModule: "present"
[    42.958] (II) Module "present" already built-in
[    42.958] (II) UnloadModule: "modesetting"
[    42.958] (II) Unloading modesetting
[    42.958] (II) UnloadModule: "fbdev"
[    42.958] (II) Unloading fbdev
[    42.958] (II) UnloadSubModule: "fbdevhw"
[    42.958] (II) Unloading fbdevhw
[    42.958] (II) UnloadModule: "vesa"
[    42.958] (II) Unloading vesa
[    42.958] (==) Depth 24 pixmap format is 32 bpp
[    43.073] (II) intel(0): SNA initialized with Sandybridge (gen6, gt1) backend
[    43.073] (==) intel(0): Backing store enabled
[    43.073] (==) intel(0): Silken mouse enabled
[    43.106] (II) intel(0): HW Cursor enabled
[    43.106] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    43.106] (==) intel(0): DPMS enabled
[    43.106] (==) intel(0): Display hotplug detection enabled
[    43.107] (II) intel(0): [DRI2] Setup complete
[    43.107] (II) intel(0): [DRI2]   DRI driver: i965
[    43.107] (II) intel(0): [DRI2]   VDPAU driver: va_gl
[    43.107] (II) intel(0): direct rendering: DRI2 enabled
[    43.107] (II) intel(0): hardware support for Present enabled
[    43.107] (--) RandR disabled
[    43.114] (II) SELinux: Disabled on system
[    43.732] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    43.732] (II) AIGLX: enabled GLX_ARB_create_context
[    43.732] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    43.732] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[    43.732] (II) AIGLX: enabled GLX_INTEL_swap_event
[    43.732] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    43.732] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[    43.732] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[    43.732] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    43.732] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[    43.732] (II) AIGLX: Loaded and initialized i965
[    43.732] (II) GLX: Initialized DRI2 GL provider for screen 0
[    45.210] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    45.210] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    45.210] (II) LoadModule: "evdev"
[    45.210] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    45.347] (II) Module evdev: vendor="X.Org Foundation"
[    45.347]  compiled for 1.16.0, module version = 2.9.0
[    45.347]  Module class: X.Org XInput Driver
[    45.347]  ABI class: X.Org XInput driver, version 21.0
[    45.347] (II) Using input driver 'evdev' for 'Power Button'
[    45.347] (**) Power Button: always reports core events
[    45.347] (**) evdev: Power Button: Device: "/dev/input/event1"
[    45.347] (--) evdev: Power Button: Vendor 0 Product 0x1
[    45.347] (--) evdev: Power Button: Found keys
[    45.347] (II) evdev: Power Button: Configuring as keyboard
[    45.347] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event1"
[    45.347] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    45.347] (**) Option "xkb_rules" "evdev"
[    45.347] (**) Option "xkb_model" "pc105"
[    45.347] (**) Option "xkb_layout" "fr"
[    45.347] (**) Option "xkb_variant" "latin9"
[    45.842] (II) config/udev: Adding input device Video Bus (/dev/input/event2)
[    45.842] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    45.842] (II) Using input driver 'evdev' for 'Video Bus'
[    45.842] (**) Video Bus: always reports core events
[    45.842] (**) evdev: Video Bus: Device: "/dev/input/event2"
[    45.842] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    45.842] (--) evdev: Video Bus: Found keys
[    45.843] (II) evdev: Video Bus: Configuring as keyboard
[    45.843] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5/event2"
[    45.843] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    45.843] (**) Option "xkb_rules" "evdev"
[    45.843] (**) Option "xkb_model" "pc105"
[    45.843] (**) Option "xkb_layout" "fr"
[    45.843] (**) Option "xkb_variant" "latin9"
[    45.844] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    45.844] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    45.844] (II) Using input driver 'evdev' for 'Power Button'
[    45.844] (**) Power Button: always reports core events
[    45.844] (**) evdev: Power Button: Device: "/dev/input/event0"
[    45.844] (--) evdev: Power Button: Vendor 0 Product 0x1
[    45.844] (--) evdev: Power Button: Found keys
[    45.844] (II) evdev: Power Button: Configuring as keyboard
[    45.844] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event0"
[    45.844] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[    45.844] (**) Option "xkb_rules" "evdev"
[    45.844] (**) Option "xkb_model" "pc105"
[    45.844] (**) Option "xkb_layout" "fr"
[    45.844] (**) Option "xkb_variant" "latin9"
[    45.845] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event8)
[    45.846] (II) No input driver specified, ignoring this device.
[    45.846] (II) This device may have been added with another device file.
[    45.846] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event9)
[    45.846] (II) No input driver specified, ignoring this device.
[    45.846] (II) This device may have been added with another device file.
[    45.846] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event10)
[    45.846] (II) No input driver specified, ignoring this device.
[    45.846] (II) This device may have been added with another device file.
[    45.847] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event11)
[    45.847] (II) No input driver specified, ignoring this device.
[    45.847] (II) This device may have been added with another device file.
[    45.847] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event12)
[    45.847] (II) No input driver specified, ignoring this device.
[    45.847] (II) This device may have been added with another device file.
[    45.848] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event13)
[    45.848] (II) No input driver specified, ignoring this device.
[    45.848] (II) This device may have been added with another device file.
[    45.849] (II) config/udev: Adding input device HP Webcam HD 4310 (/dev/input/event15)
[    45.849] (**) HP Webcam HD 4310: Applying InputClass "evdev keyboard catchall"
[    45.849] (II) Using input driver 'evdev' for 'HP Webcam HD 4310'
[    45.849] (**) HP Webcam HD 4310: always reports core events
[    45.849] (**) evdev: HP Webcam HD 4310: Device: "/dev/input/event15"
[    45.849] (--) evdev: HP Webcam HD 4310: Vendor 0x3f0 Product 0xe807
[    45.849] (--) evdev: HP Webcam HD 4310: Found keys
[    45.849] (II) evdev: HP Webcam HD 4310: Configuring as keyboard
[    45.849] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.5/0000:04:00.0/0000:05:01.2/usb9/9-4/9-4:1.0/input/input18/event15"
[    45.849] (II) XINPUT: Adding extended input device "HP Webcam HD 4310" (type: KEYBOARD, id 9)
[    45.849] (**) Option "xkb_rules" "evdev"
[    45.849] (**) Option "xkb_model" "pc105"
[    45.849] (**) Option "xkb_layout" "fr"
[    45.849] (**) Option "xkb_variant" "latin9"
[    45.850] (II) config/udev: Adding input device C-Media Electronics Inc.       USB PnP Sound Device (/dev/input/event3)
[    45.850] (**) C-Media Electronics Inc.       USB PnP Sound Device: Applying InputClass "evdev keyboard catchall"
[    45.850] (II) Using input driver 'evdev' for 'C-Media Electronics Inc.       USB PnP Sound Device'
[    45.850] (**) C-Media Electronics Inc.       USB PnP Sound Device: always reports core events
[    45.850] (**) evdev: C-Media Electronics Inc.       USB PnP Sound Device: Device: "/dev/input/event3"
[    45.850] (--) evdev: C-Media Electronics Inc.       USB PnP Sound Device: Vendor 0xd8c Product 0x13a
[    45.850] (--) evdev: C-Media Electronics Inc.       USB PnP Sound Device: Found keys
[    45.850] (II) evdev: C-Media Electronics Inc.       USB PnP Sound Device: Configuring as keyboard
[    45.850] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb8/8-1/8-1.5/8-1.5:1.3/0003:0D8C:013A.0002/input/input6/event3"
[    45.850] (II) XINPUT: Adding extended input device "C-Media Electronics Inc.       USB PnP Sound Device" (type: KEYBOARD, id 10)
[    45.850] (**) Option "xkb_rules" "evdev"
[    45.851] (**) Option "xkb_model" "pc105"
[    45.851] (**) Option "xkb_layout" "fr"
[    45.851] (**) Option "xkb_variant" "latin9"
[    45.852] (II) config/udev: Adding input device USB Audio Controller (/dev/input/event4)
[    45.852] (**) USB Audio Controller: Applying InputClass "evdev keyboard catchall"
[    45.852] (II) Using input driver 'evdev' for 'USB Audio Controller'
[    45.852] (**) USB Audio Controller: always reports core events
[    45.852] (**) evdev: USB Audio Controller: Device: "/dev/input/event4"
[    45.852] (--) evdev: USB Audio Controller: Vendor 0xc76 Product 0x1605
[    45.852] (--) evdev: USB Audio Controller: Found keys
[    45.852] (II) evdev: USB Audio Controller: Configuring as keyboard
[    45.852] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb8/8-1/8-1.6/8-1.6:1.3/0003:0C76:1605.0003/input/input7/event4"
[    45.852] (II) XINPUT: Adding extended input device "USB Audio Controller" (type: KEYBOARD, id 11)
[    45.852] (**) Option "xkb_rules" "evdev"
[    45.852] (**) Option "xkb_model" "pc105"
[    45.852] (**) Option "xkb_layout" "fr"
[    45.852] (**) Option "xkb_variant" "latin9"
[    45.853] (II) config/udev: Adding input device Logitech M310 (/dev/input/event5)
[    45.853] (**) Logitech M310: Applying InputClass "evdev pointer catchall"
[    45.853] (II) Using input driver 'evdev' for 'Logitech M310'
[    45.853] (**) Logitech M310: always reports core events
[    45.853] (**) evdev: Logitech M310: Device: "/dev/input/event5"
[    45.854] (--) evdev: Logitech M310: Vendor 0x46d Product 0x1024
[    45.854] (--) evdev: Logitech M310: Found 20 mouse buttons
[    45.854] (--) evdev: Logitech M310: Found scroll wheel(s)
[    45.854] (--) evdev: Logitech M310: Found relative axes
[    45.854] (--) evdev: Logitech M310: Found x and y relative axes
[    45.854] (II) evdev: Logitech M310: Configuring as mouse
[    45.854] (II) evdev: Logitech M310: Adding scrollwheel support
[    45.854] (**) evdev: Logitech M310: YAxisMapping: buttons 4 and 5
[    45.854] (**) evdev: Logitech M310: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    45.854] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb8/8-1/8-1.7/8-1.7:1.2/0003:046D:C52B.0006/0003:046D:1024.0007/input/input8/event5"
[    45.854] (II) XINPUT: Adding extended input device "Logitech M310" (type: MOUSE, id 12)
[    45.854] (II) evdev: Logitech M310: initialized for relative axes.
[    45.854] (**) Logitech M310: (accel) keeping acceleration scheme 1
[    45.854] (**) Logitech M310: (accel) acceleration profile 0
[    45.854] (**) Logitech M310: (accel) acceleration factor: 2.000
[    45.854] (**) Logitech M310: (accel) acceleration threshold: 4
[    45.855] (II) config/udev: Adding input device Logitech M310 (/dev/input/mouse0)
[    45.855] (II) No input driver specified, ignoring this device.
[    45.855] (II) This device may have been added with another device file.
[    45.856] (II) config/udev: Adding input device Logitech K520 (/dev/input/event6)
[    45.856] (**) Logitech K520: Applying InputClass "evdev keyboard catchall"
[    45.856] (II) Using input driver 'evdev' for 'Logitech K520'
[    45.856] (**) Logitech K520: always reports core events
[    45.856] (**) evdev: Logitech K520: Device: "/dev/input/event6"
[    45.856] (--) evdev: Logitech K520: Vendor 0x46d Product 0x2011
[    45.856] (--) evdev: Logitech K520: Found 1 mouse buttons
[    45.856] (--) evdev: Logitech K520: Found scroll wheel(s)
[    45.856] (--) evdev: Logitech K520: Found relative axes
[    45.856] (II) evdev: Logitech K520: Forcing relative x/y axes to exist.
[    45.856] (--) evdev: Logitech K520: Found absolute axes
[    45.856] (II) evdev: Logitech K520: Forcing absolute x/y axes to exist.
[    45.856] (--) evdev: Logitech K520: Found keys
[    45.856] (II) evdev: Logitech K520: Configuring as mouse
[    45.856] (II) evdev: Logitech K520: Configuring as keyboard
[    45.856] (II) evdev: Logitech K520: Adding scrollwheel support
[    45.856] (**) evdev: Logitech K520: YAxisMapping: buttons 4 and 5
[    45.856] (**) evdev: Logitech K520: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    45.856] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb8/8-1/8-1.7/8-1.7:1.2/0003:046D:C52B.0006/0003:046D:2011.0008/input/input9/event6"
[    45.856] (II) XINPUT: Adding extended input device "Logitech K520" (type: KEYBOARD, id 13)
[    45.856] (**) Option "xkb_rules" "evdev"
[    45.856] (**) Option "xkb_model" "pc105"
[    45.856] (**) Option "xkb_layout" "fr"
[    45.856] (**) Option "xkb_variant" "latin9"
[    45.857] (II) evdev: Logitech K520: initialized for relative axes.
[    45.857] (WW) evdev: Logitech K520: ignoring absolute axes.
[    45.857] (**) Logitech K520: (accel) keeping acceleration scheme 1
[    45.857] (**) Logitech K520: (accel) acceleration profile 0
[    45.857] (**) Logitech K520: (accel) acceleration factor: 2.000
[    45.857] (**) Logitech K520: (accel) acceleration threshold: 4
[    45.858] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event14)
[    45.858] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    45.858] (II) Using input driver 'evdev' for 'Eee PC WMI hotkeys'
[    45.858] (**) Eee PC WMI hotkeys: always reports core events
[    45.858] (**) evdev: Eee PC WMI hotkeys: Device: "/dev/input/event14"
[    45.858] (--) evdev: Eee PC WMI hotkeys: Vendor 0 Product 0
[    45.858] (--) evdev: Eee PC WMI hotkeys: Found keys
[    45.858] (II) evdev: Eee PC WMI hotkeys: Configuring as keyboard
[    45.858] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input17/event14"
[    45.858] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 14)
[    45.858] (**) Option "xkb_rules" "evdev"
[    45.858] (**) Option "xkb_model" "pc105"
[    45.858] (**) Option "xkb_layout" "fr"
[    45.858] (**) Option "xkb_variant" "latin9"
[    45.859] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[    45.859] (II) No input driver specified, ignoring this device.
[    45.859] (II) This device may have been added with another device file.
[    74.986] (II) intel(0): resizing framebuffer to 1280x800
[    74.987] (II) intel(0): switch to mode 1280x800@59.9 on HDMI1 using pipe 0, position (0, 0), rotation normal, reflection none
 



$ sudo apt-get remove --purge xserver-xorg-video-intel


sudo] password for alain:
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances      
Lecture des informations d'état... Fait
Les paquets suivants ont été installés automatiquement et ne sont plus nécessaires :
  gnome-core hyphen-en-us libreoffice libreoffice-help-en-us mythes-en-us
  x11-apps x11-session-utils xinit xorg
Veuillez utiliser « apt-get autoremove » pour les supprimer.
Les paquets suivants seront ENLEVÉS :
  xserver-xorg-video-intel*
0 mis à jour, 0 nouvellement installés, 1 à enlever et 0 non mis à jour.
Après cette opération, 3 326 ko d'espace disque seront libérés.
Souhaitez-vous continuer ? [O/n] o
(Lecture de la base de données... 488589 fichiers et répertoires déjà installés.)
Suppression de xserver-xorg-video-intel (2:2.99.917+git20161206-1~bpo8+1) ...
Purge des fichiers de configuration de xserver-xorg-video-intel (2:2.99.917+git20161206-1~bpo8+1) ...
Traitement des actions différées (« triggers ») pour man-db (2.7.0.2-5) ...
Traitement des actions différées (« triggers ») pour libc-bin (2.19-18+deb8u9) ...
 



maintenant , je réponds à robert2a:

le dossier et le fichier n'existent pas

par contre :

$ cat /var/log/Xorg.1.log


[  1708.134]
X.Org X Server 1.16.4
Release Date: 2014-12-20
[  1708.134] X Protocol Version 11, Revision 0
[  1708.134] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[  1708.134] Current Operating System: Linux debian 3.16.0-4-amd64 #1 SMP Debian 3.16.39-1+deb8u2 (2017-03-07) x86_64
[  1708.134] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 root=UUID=1432ba42-31c4-4ca6-a952-e96043b05bbf ro quiet
[  1708.134] Build Date: 11 February 2015  12:32:02AM
[  1708.134] xorg-server 2:1.16.4-1 (http://www.debian.org/support)
[  1708.134] Current version of pixman: 0.32.6
[  1708.134]  Before reporting problems, check http://wiki.x.org
  to make sure that you have the latest version.
[  1708.134] Markers: (--) probed, (**) from config file, (==) default setting,
  (++) from command line, (!!) notice, (II) informational,
  (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  1708.134] (==) Log file: "/var/log/Xorg.1.log", Time: Sat Apr 22 19:54:31 2017
[  1708.134] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[  1708.134] (==) No Layout section.  Using the first Screen section.
[  1708.134] (==) No screen section available. Using defaults.
[  1708.134] (**) |-->Screen "Default Screen Section" (0)
[  1708.134] (**) |   |-->Monitor "<default monitor>"
[  1708.134] (==) No monitor specified for screen "Default Screen Section".
  Using a default monitor configuration.
[  1708.134] (==) Automatically adding devices
[  1708.134] (==) Automatically enabling devices
[  1708.134] (==) Automatically adding GPU devices
[  1708.134] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[  1708.134]  Entry deleted from font path.
[  1708.134] (==) FontPath set to:
  /usr/share/fonts/X11/misc,
  /usr/share/fonts/X11/100dpi/:unscaled,
  /usr/share/fonts/X11/75dpi/:unscaled,
  /usr/share/fonts/X11/Type1,
  /usr/share/fonts/X11/100dpi,
  /usr/share/fonts/X11/75dpi,
  built-ins
[  1708.134] (==) ModulePath set to "/usr/lib/xorg/modules"
[  1708.134] (II) The server relies on udev to provide the list of input devices.
  If no devices become available, reconfigure udev or disable AutoAddDevices.
[  1708.134] (II) Loader magic: 0x7f3ee9e13d80
[  1708.134] (II) Module ABI versions:
[  1708.134]  X.Org ANSI C Emulation: 0.4
[  1708.134]  X.Org Video Driver: 18.0
[  1708.134]  X.Org XInput driver : 21.0
[  1708.134]  X.Org Server Extension : 8.0
[  1708.135] (II) xfree86: Adding drm device (/dev/dri/card0)
[  1708.135] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied
[  1708.136] (--) PCI:*(0:0:2:0) 8086:0102:1043:84ca rev 9, Mem @ 0xf7800000/4194304, 0xe0000000/268435456, I/O @ 0x0000f000/64
[  1708.136] (II) LoadModule: "glx"
[  1708.136] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[  1708.137] (II) Module glx: vendor="X.Org Foundation"
[  1708.137]  compiled for 1.16.4, module version = 1.0.0
[  1708.137]  ABI class: X.Org Server Extension, version 8.0
[  1708.137] (==) AIGLX enabled
[  1708.137] (==) Matched intel as autoconfigured driver 0
[  1708.137] (==) Matched modesetting as autoconfigured driver 1
[  1708.137] (==) Matched fbdev as autoconfigured driver 2
[  1708.137] (==) Matched vesa as autoconfigured driver 3
[  1708.137] (==) Assigned the driver to the xf86ConfigLayout
[  1708.137] (II) LoadModule: "intel"
[  1708.137] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[  1708.138] (II) Module intel: vendor="X.Org Foundation"
[  1708.138]  compiled for 1.15.99.904, module version = 2.21.15
[  1708.138]  Module class: X.Org Video Driver
[  1708.138]  ABI class: X.Org Video Driver, version 18.0
[  1708.138] (II) LoadModule: "modesetting"
[  1708.138] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[  1708.138] (II) Module modesetting: vendor="X.Org Foundation"
[  1708.138]  compiled for 1.16.4, module version = 0.9.0
[  1708.138]  Module class: X.Org Video Driver
[  1708.138]  ABI class: X.Org Video Driver, version 18.0
[  1708.138] (II) LoadModule: "fbdev"
[  1708.138] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[  1708.138] (II) Module fbdev: vendor="X.Org Foundation"
[  1708.138]  compiled for 1.15.99.904, module version = 0.4.4
[  1708.138]  Module class: X.Org Video Driver
[  1708.138]  ABI class: X.Org Video Driver, version 18.0
[  1708.138] (II) LoadModule: "vesa"
[  1708.138] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[  1708.138] (II) Module vesa: vendor="X.Org Foundation"
[  1708.138]  compiled for 1.15.99.904, module version = 2.3.3
[  1708.138]  Module class: X.Org Video Driver
[  1708.138]  ABI class: X.Org Video Driver, version 18.0
[  1708.138] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
  i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
  915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
  Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
  GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
  HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
  HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
  HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
  HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
[  1708.139] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[  1708.139] (II) FBDEV: driver for framebuffer: fbdev
[  1708.139] (II) VESA: driver for VESA chipsets: vesa
[  1708.139] (--) using VT number 2

[  1708.510] (WW) Falling back to old probe method for modesetting
[  1708.511] (WW) Falling back to old probe method for fbdev
[  1708.511] (II) Loading sub module "fbdevhw"
[  1708.511] (II) LoadModule: "fbdevhw"
[  1708.511] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[  1708.511] (II) Module fbdevhw: vendor="X.Org Foundation"
[  1708.511]  compiled for 1.16.4, module version = 0.0.2
[  1708.511]  ABI class: X.Org Video Driver, version 18.0
[  1708.511] (WW) Falling back to old probe method for vesa
[  1708.511] (II) intel(0): Creating default Display subsection in Screen section
  "Default Screen Section" for depth/fbbpp 24/32
[  1708.511] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[  1708.511] (==) intel(0): RGB weight 888
[  1708.511] (==) intel(0): Default visual is TrueColor
[  1708.511] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 2000
[  1708.511] (**) intel(0): Relaxed fencing enabled
[  1708.511] (**) intel(0): Wait on SwapBuffers? enabled
[  1708.511] (**) intel(0): Triple buffering? enabled
[  1708.511] (**) intel(0): Framebuffer tiled
[  1708.511] (**) intel(0): Pixmaps tiled
[  1708.511] (**) intel(0): 3D buffers tiled
[  1708.511] (**) intel(0): SwapBuffers wait enabled
[  1708.511] (==) intel(0): video overlay key set to 0x101fe
[  1708.524] (II) intel(0): Output VGA1 has no monitor section
[  1708.525] (II) intel(0): Output HDMI1 has no monitor section
[  1708.525] (II) intel(0): Output HDMI2 has no monitor section
[  1708.525] (II) intel(0): Output DP1 has no monitor section
[  1708.525] (II) intel(0): Output DP2 has no monitor section
[  1708.538] (II) intel(0): EDID for output VGA1
[  1708.538] (II) intel(0): Manufacturer: AOC  Model: 2436  Serial#: 80483
[  1708.538] (II) intel(0): Year: 2011  Week: 40
[  1708.538] (II) intel(0): EDID Version: 1.3
[  1708.538] (II) intel(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
[  1708.538] (II) intel(0): Sync:  Separate
[  1708.538] (II) intel(0): Max Image Size [cm]: horiz.: 52  vert.: 29
[  1708.538] (II) intel(0): Gamma: 2.20
[  1708.538] (II) intel(0): DPMS capabilities: Off; RGB/Color Display
[  1708.538] (II) intel(0): First detailed timing is preferred mode
[  1708.538] (II) intel(0): redX: 0.649 redY: 0.338   greenX: 0.289 greenY: 0.609
[  1708.538] (II) intel(0): blueX: 0.146 blueY: 0.070   whiteX: 0.312 whiteY: 0.329
[  1708.538] (II) intel(0): Supported established timings:
[  1708.538] (II) intel(0): 720x400@70Hz
[  1708.538] (II) intel(0): 640x480@60Hz
[  1708.538] (II) intel(0): 640x480@67Hz
[  1708.538] (II) intel(0): 640x480@72Hz
[  1708.538] (II) intel(0): 640x480@75Hz
[  1708.538] (II) intel(0): 800x600@56Hz
[  1708.538] (II) intel(0): 800x600@60Hz
[  1708.538] (II) intel(0): 800x600@72Hz
[  1708.538] (II) intel(0): 800x600@75Hz
[  1708.538] (II) intel(0): 832x624@75Hz
[  1708.539] (II) intel(0): 1024x768@60Hz
[  1708.539] (II) intel(0): 1024x768@70Hz
[  1708.539] (II) intel(0): 1024x768@75Hz
[  1708.539] (II) intel(0): 1280x1024@75Hz
[  1708.539] (II) intel(0): Manufacturer's mask: 0
[  1708.539] (II) intel(0): Supported standard timings:
[  1708.539] (II) intel(0): #0: hsize: 1280  vsize 720  refresh: 60  vid: 49281
[  1708.539] (II) intel(0): #1: hsize: 1280  vsize 960  refresh: 60  vid: 16513
[  1708.539] (II) intel(0): #2: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[  1708.539] (II) intel(0): #3: hsize: 1440  vsize 900  refresh: 60  vid: 149
[  1708.539] (II) intel(0): #4: hsize: 1680  vsize 1050  refresh: 60  vid: 179
[  1708.539] (II) intel(0): Supported detailed timing:
[  1708.539] (II) intel(0): clock: 148.5 MHz   Image Size:  521 x 293 mm
[  1708.539] (II) intel(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[  1708.539] (II) intel(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[  1708.539] (II) intel(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 80 kHz, PixClock max 175 MHz
[  1708.539] (II) intel(0): Monitor name: 2436
[  1708.539] (II) intel(0): Serial No: AIWBAHA280483
[  1708.539] (II) intel(0): EDID (in hex):
[  1708.539] (II) intel(0):   00ffffffffffff0005e33624633a0100
[  1708.539] (II) intel(0):   2815010368341d782a6041a6564a9c25
[  1708.539] (II) intel(0):   125054bfef0081c0814081809500b300
[  1708.539] (II) intel(0):   010101010101023a801871382d40582c
[  1708.539] (II) intel(0):   450009252100001e000000fd00384b1e
[  1708.539] (II) intel(0):   5011000a202020202020000000fc0032
[  1708.539] (II) intel(0):   3433360a2020202020202020000000ff
[  1708.539] (II) intel(0):   0041495742414841323830343833004a
[  1708.539] (II) intel(0): Printing probed modes for output VGA1
[  1708.539] (II) intel(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[  1708.539] (II) intel(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[  1708.539] (II) intel(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[  1708.539] (II) intel(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[  1708.539] (II) intel(0): Modeline "1440x900"x59.9  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz e)
[  1708.539] (II) intel(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[  1708.539] (II) intel(0): Modeline "1280x720"x60.0   74.44  1280 1336 1472 1664  720 721 724 746 -hsync +vsync (44.7 kHz)
[  1708.539] (II) intel(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz e)
[  1708.539] (II) intel(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[  1708.539] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[  1708.539] (II) intel(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[  1708.539] (II) intel(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[  1708.539] (II) intel(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[  1708.539] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[  1708.539] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[  1708.539] (II) intel(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[  1708.539] (II) intel(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 491 520 -hsync -vsync (37.9 kHz e)
[  1708.539] (II) intel(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[  1708.539] (II) intel(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[  1708.539] (II) intel(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[  1708.540] (II) intel(0): EDID for output HDMI1
[  1708.541] (II) intel(0): EDID for output HDMI2
[  1708.541] (II) intel(0): EDID for output DP1
[  1708.541] (II) intel(0): EDID for output DP2
[  1708.541] (II) intel(0): Output VGA1 connected
[  1708.541] (II) intel(0): Output HDMI1 disconnected
[  1708.541] (II) intel(0): Output HDMI2 disconnected
[  1708.541] (II) intel(0): Output DP1 disconnected
[  1708.541] (II) intel(0): Output DP2 disconnected
[  1708.541] (II) intel(0): Using exact sizes for initial modes
[  1708.541] (II) intel(0): Output VGA1 using initial mode 1920x1080
[  1708.541] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[  1708.541] (II) intel(0): Kernel page flipping support detected, enabling
[  1708.541] (==) intel(0): DPI set to (96, 96)
[  1708.541] (II) Loading sub module "fb"
[  1708.541] (II) LoadModule: "fb"
[  1708.541] (II) Loading /usr/lib/xorg/modules/libfb.so
[  1708.541] (II) Module fb: vendor="X.Org Foundation"
[  1708.541]  compiled for 1.16.4, module version = 1.0.0
[  1708.541]  ABI class: X.Org ANSI C Emulation, version 0.4
[  1708.541] (II) Loading sub module "dri2"
[  1708.541] (II) LoadModule: "dri2"
[  1708.541] (II) Module "dri2" already built-in
[  1708.541] (II) UnloadModule: "modesetting"
[  1708.541] (II) Unloading modesetting
[  1708.541] (II) UnloadModule: "fbdev"
[  1708.541] (II) Unloading fbdev
[  1708.541] (II) UnloadSubModule: "fbdevhw"
[  1708.541] (II) Unloading fbdevhw
[  1708.541] (II) UnloadModule: "vesa"
[  1708.541] (II) Unloading vesa
[  1708.541] (==) Depth 24 pixmap format is 32 bpp
[  1708.541] (II) intel(0): [DRI2] Setup complete
[  1708.541] (II) intel(0): [DRI2]   DRI driver: i965
[  1708.541] (II) intel(0): Allocated new frame buffer 1920x1080 stride 7680, tiled
[  1708.542] (II) UXA(0): Driver registered support for the following operations:
[  1708.542] (II)         solid
[  1708.542] (II)         copy
[  1708.542] (II)         composite (RENDER acceleration)
[  1708.542] (II)         put_image
[  1708.542] (II)         get_image
[  1708.542] (==) intel(0): Backing store enabled
[  1708.543] (==) intel(0): Silken mouse enabled
[  1708.543] (II) intel(0): Initializing HW Cursor
[  1708.543] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[  1708.543] (==) intel(0): DPMS enabled
[  1708.543] (==) intel(0): Intel XvMC decoder enabled
[  1708.543] (II) intel(0): Set up textured video
[  1708.543] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[  1708.543] (II) intel(0): direct rendering: DRI2 Enabled
[  1708.543] (==) intel(0): hotplug detection: "enabled"
[  1708.556] (--) RandR disabled
[  1708.560] (II) SELinux: Disabled on system
[  1708.564] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[  1708.564] (II) AIGLX: enabled GLX_ARB_create_context
[  1708.564] (II) AIGLX: enabled GLX_ARB_create_context_profile
[  1708.564] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[  1708.564] (II) AIGLX: enabled GLX_INTEL_swap_event
[  1708.564] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[  1708.564] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[  1708.564] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[  1708.564] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[  1708.564] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[  1708.564] (II) AIGLX: Loaded and initialized i965
[  1708.564] (II) GLX: Initialized DRI2 GL provider for screen 0
[  1708.565] (II) intel(0): Setting screen physical size to 508 x 285
[  1708.590] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[  1708.590] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  1708.590] (II) LoadModule: "evdev"
[  1708.590] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[  1708.590] (II) Module evdev: vendor="X.Org Foundation"
[  1708.590]  compiled for 1.16.0, module version = 2.9.0
[  1708.590]  Module class: X.Org XInput Driver
[  1708.590]  ABI class: X.Org XInput driver, version 21.0
[  1708.590] (II) Using input driver 'evdev' for 'Power Button'
[  1708.590] (**) Power Button: always reports core events
[  1708.590] (**) evdev: Power Button: Device: "/dev/input/event3"
[  1708.590] (--) evdev: Power Button: Vendor 0 Product 0x1
[  1708.590] (--) evdev: Power Button: Found keys
[  1708.590] (II) evdev: Power Button: Configuring as keyboard
[  1708.590] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event3"
[  1708.591] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[  1708.591] (**) Option "xkb_rules" "evdev"
[  1708.591] (**) Option "xkb_model" "pc105"
[  1708.591] (**) Option "xkb_layout" "fr"
[  1708.591] (**) Option "xkb_variant" "latin9"
[  1708.613] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[  1708.613] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[  1708.613] (II) Using input driver 'evdev' for 'Video Bus'
[  1708.613] (**) Video Bus: always reports core events
[  1708.613] (**) evdev: Video Bus: Device: "/dev/input/event5"
[  1708.613] (--) evdev: Video Bus: Vendor 0 Product 0x6
[  1708.613] (--) evdev: Video Bus: Found keys
[  1708.613] (II) evdev: Video Bus: Configuring as keyboard
[  1708.614] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8/event5"
[  1708.614] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[  1708.614] (**) Option "xkb_rules" "evdev"
[  1708.614] (**) Option "xkb_model" "pc105"
[  1708.614] (**) Option "xkb_layout" "fr"
[  1708.614] (**) Option "xkb_variant" "latin9"
[  1708.614] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[  1708.614] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  1708.614] (II) Using input driver 'evdev' for 'Power Button'
[  1708.614] (**) Power Button: always reports core events
[  1708.614] (**) evdev: Power Button: Device: "/dev/input/event2"
[  1708.614] (--) evdev: Power Button: Vendor 0 Product 0x1
[  1708.614] (--) evdev: Power Button: Found keys
[  1708.614] (II) evdev: Power Button: Configuring as keyboard
[  1708.614] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5/event2"
[  1708.614] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[  1708.614] (**) Option "xkb_rules" "evdev"
[  1708.614] (**) Option "xkb_model" "pc105"
[  1708.614] (**) Option "xkb_layout" "fr"
[  1708.614] (**) Option "xkb_variant" "latin9"
[  1708.614] (II) config/udev: Adding drm device (/dev/dri/card0)
[  1708.614] (II) xfree86: Adding drm device (/dev/dri/card0)
[  1708.614] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied
[  1708.615] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event7)
[  1708.615] (II) No input driver specified, ignoring this device.
[  1708.615] (II) This device may have been added with another device file.
[  1708.615] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event8)
[  1708.615] (II) No input driver specified, ignoring this device.
[  1708.615] (II) This device may have been added with another device file.
[  1708.615] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event9)
[  1708.615] (II) No input driver specified, ignoring this device.
[  1708.615] (II) This device may have been added with another device file.
[  1708.615] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event10)
[  1708.615] (II) No input driver specified, ignoring this device.
[  1708.615] (II) This device may have been added with another device file.
[  1708.615] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event11)
[  1708.615] (II) No input driver specified, ignoring this device.
[  1708.615] (II) This device may have been added with another device file.
[  1708.615] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event12)
[  1708.615] (II) No input driver specified, ignoring this device.
[  1708.615] (II) This device may have been added with another device file.
[  1708.616] (II) config/udev: Adding input device HP Webcam HD 4310 (/dev/input/event17)
[  1708.616] (**) HP Webcam HD 4310: Applying InputClass "evdev keyboard catchall"
[  1708.616] (II) Using input driver 'evdev' for 'HP Webcam HD 4310'
[  1708.616] (**) HP Webcam HD 4310: always reports core events
[  1708.616] (**) evdev: HP Webcam HD 4310: Device: "/dev/input/event17"
[  1708.616] (--) evdev: HP Webcam HD 4310: Vendor 0x3f0 Product 0xe807
[  1708.616] (--) evdev: HP Webcam HD 4310: Found keys
[  1708.616] (II) evdev: HP Webcam HD 4310: Configuring as keyboard
[  1708.616] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.5/0000:04:00.0/0000:05:01.2/usb3/3-4/3-4:1.0/input/input20/event17"
[  1708.616] (II) XINPUT: Adding extended input device "HP Webcam HD 4310" (type: KEYBOARD, id 9)
[  1708.616] (**) Option "xkb_rules" "evdev"
[  1708.616] (**) Option "xkb_model" "pc105"
[  1708.616] (**) Option "xkb_layout" "fr"
[  1708.616] (**) Option "xkb_variant" "latin9"
[  1708.616] (II) config/udev: Adding input device saa7134 IR (Hauppauge WinTV-HVR (/dev/input/event13)
[  1708.616] (**) saa7134 IR (Hauppauge WinTV-HVR: Applying InputClass "evdev keyboard catchall"
[  1708.616] (II) Using input driver 'evdev' for 'saa7134 IR (Hauppauge WinTV-HVR'
[  1708.616] (**) saa7134 IR (Hauppauge WinTV-HVR: always reports core events
[  1708.616] (**) evdev: saa7134 IR (Hauppauge WinTV-HVR: Device: "/dev/input/event13"
[  1708.616] (--) evdev: saa7134 IR (Hauppauge WinTV-HVR: Vendor 0x70 Product 0x6707
[  1708.616] (--) evdev: saa7134 IR (Hauppauge WinTV-HVR: Found keys
[  1708.616] (II) evdev: saa7134 IR (Hauppauge WinTV-HVR: Configuring as keyboard
[  1708.616] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.5/0000:04:00.0/0000:05:02.0/rc/rc0/input16/event13"
[  1708.616] (II) XINPUT: Adding extended input device "saa7134 IR (Hauppauge WinTV-HVR" (type: KEYBOARD, id 10)
[  1708.616] (**) Option "xkb_rules" "evdev"
[  1708.616] (**) Option "xkb_model" "pc105"
[  1708.616] (**) Option "xkb_layout" "fr"
[  1708.616] (**) Option "xkb_variant" "latin9"
[  1708.617] (II) config/udev: Adding input device USB Audio Controller (/dev/input/event0)
[  1708.617] (**) USB Audio Controller: Applying InputClass "evdev keyboard catchall"
[  1708.617] (II) Using input driver 'evdev' for 'USB Audio Controller'
[  1708.617] (**) USB Audio Controller: always reports core events
[  1708.617] (**) evdev: USB Audio Controller: Device: "/dev/input/event0"
[  1708.617] (--) evdev: USB Audio Controller: Vendor 0xc76 Product 0x1605
[  1708.617] (--) evdev: USB Audio Controller: Found keys
[  1708.617] (II) evdev: USB Audio Controller: Configuring as keyboard
[  1708.617] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.3/0003:0C76:1605.0002/input/input3/event0"
[  1708.617] (II) XINPUT: Adding extended input device "USB Audio Controller" (type: KEYBOARD, id 11)
[  1708.617] (**) Option "xkb_rules" "evdev"
[  1708.617] (**) Option "xkb_model" "pc105"
[  1708.617] (**) Option "xkb_layout" "fr"
[  1708.617] (**) Option "xkb_variant" "latin9"
[  1708.617] (II) config/udev: Adding input device C-Media Electronics Inc.       USB PnP Sound Device (/dev/input/event1)
[  1708.617] (**) C-Media Electronics Inc.       USB PnP Sound Device: Applying InputClass "evdev keyboard catchall"
[  1708.617] (II) Using input driver 'evdev' for 'C-Media Electronics Inc.       USB PnP Sound Device'
[  1708.617] (**) C-Media Electronics Inc.       USB PnP Sound Device: always reports core events
[  1708.617] (**) evdev: C-Media Electronics Inc.       USB PnP Sound Device: Device: "/dev/input/event1"
[  1708.617] (--) evdev: C-Media Electronics Inc.       USB PnP Sound Device: Vendor 0xd8c Product 0x13a
[  1708.617] (--) evdev: C-Media Electronics Inc.       USB PnP Sound Device: Found 1 mouse buttons
[  1708.617] (--) evdev: C-Media Electronics Inc.       USB PnP Sound Device: Found keys
[  1708.617] (II) evdev: C-Media Electronics Inc.       USB PnP Sound Device: Forcing relative x/y axes to exist.
[  1708.617] (II) evdev: C-Media Electronics Inc.       USB PnP Sound Device: Configuring as mouse
[  1708.617] (II) evdev: C-Media Electronics Inc.       USB PnP Sound Device: Configuring as keyboard
[  1708.617] (**) evdev: C-Media Electronics Inc.       USB PnP Sound Device: YAxisMapping: buttons 4 and 5
[  1708.617] (**) evdev: C-Media Electronics Inc.       USB PnP Sound Device: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[  1708.618] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.3/0003:0D8C:013A.0003/input/input4/event1"
[  1708.618] (II) XINPUT: Adding extended input device "C-Media Electronics Inc.       USB PnP Sound Device" (type: KEYBOARD, id 12)
[  1708.618] (**) Option "xkb_rules" "evdev"
[  1708.618] (**) Option "xkb_model" "pc105"
[  1708.618] (**) Option "xkb_layout" "fr"
[  1708.618] (**) Option "xkb_variant" "latin9"
[  1708.618] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:1024 (/dev/input/event15)
[  1708.618] (**) Logitech Unifying Device. Wireless PID:1024: Applying InputClass "evdev pointer catchall"
[  1708.618] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:1024'
[  1708.618] (**) Logitech Unifying Device. Wireless PID:1024: always reports core events
[  1708.618] (**) evdev: Logitech Unifying Device. Wireless PID:1024: Device: "/dev/input/event15"
[  1708.618] (--) evdev: Logitech Unifying Device. Wireless PID:1024: Vendor 0x46d Product 0xc52b
[  1708.618] (--) evdev: Logitech Unifying Device. Wireless PID:1024: Found 20 mouse buttons
[  1708.618] (--) evdev: Logitech Unifying Device. Wireless PID:1024: Found scroll wheel(s)
[  1708.618] (--) evdev: Logitech Unifying Device. Wireless PID:1024: Found relative axes
[  1708.618] (--) evdev: Logitech Unifying Device. Wireless PID:1024: Found x and y relative axes
[  1708.618] (II) evdev: Logitech Unifying Device. Wireless PID:1024: Configuring as mouse
[  1708.618] (II) evdev: Logitech Unifying Device. Wireless PID:1024: Adding scrollwheel support
[  1708.618] (**) evdev: Logitech Unifying Device. Wireless PID:1024: YAxisMapping: buttons 4 and 5
[  1708.618] (**) evdev: Logitech Unifying Device. Wireless PID:1024: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[  1708.618] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.2/0003:046D:C52B.0006/0003:046D:C52B.0007/input/input18/event15"
[  1708.618] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:1024" (type: MOUSE, id 13)
[  1708.618] (II) evdev: Logitech Unifying Device. Wireless PID:1024: initialized for relative axes.
[  1708.618] (**) Logitech Unifying Device. Wireless PID:1024: (accel) keeping acceleration scheme 1
[  1708.618] (**) Logitech Unifying Device. Wireless PID:1024: (accel) acceleration profile 0
[  1708.618] (**) Logitech Unifying Device. Wireless PID:1024: (accel) acceleration factor: 2.000
[  1708.618] (**) Logitech Unifying Device. Wireless PID:1024: (accel) acceleration threshold: 4
[  1708.619] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:1024 (/dev/input/mouse1)
[  1708.619] (II) No input driver specified, ignoring this device.
[  1708.619] (II) This device may have been added with another device file.
[  1708.619] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:2011 (/dev/input/event16)
[  1708.619] (**) Logitech Unifying Device. Wireless PID:2011: Applying InputClass "evdev keyboard catchall"
[  1708.619] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:2011'
[  1708.619] (**) Logitech Unifying Device. Wireless PID:2011: always reports core events
[  1708.619] (**) evdev: Logitech Unifying Device. Wireless PID:2011: Device: "/dev/input/event16"
[  1708.619] (--) evdev: Logitech Unifying Device. Wireless PID:2011: Vendor 0x46d Product 0xc52b
[  1708.619] (--) evdev: Logitech Unifying Device. Wireless PID:2011: Found 1 mouse buttons
[  1708.619] (--) evdev: Logitech Unifying Device. Wireless PID:2011: Found scroll wheel(s)
[  1708.619] (--) evdev: Logitech Unifying Device. Wireless PID:2011: Found relative axes
[  1708.619] (II) evdev: Logitech Unifying Device. Wireless PID:2011: Forcing relative x/y axes to exist.
[  1708.619] (--) evdev: Logitech Unifying Device. Wireless PID:2011: Found absolute axes
[  1708.619] (II) evdev: Logitech Unifying Device. Wireless PID:2011: Forcing absolute x/y axes to exist.
[  1708.619] (--) evdev: Logitech Unifying Device. Wireless PID:2011: Found keys
[  1708.619] (II) evdev: Logitech Unifying Device. Wireless PID:2011: Configuring as mouse
[  1708.619] (II) evdev: Logitech Unifying Device. Wireless PID:2011: Configuring as keyboard
[  1708.619] (II) evdev: Logitech Unifying Device. Wireless PID:2011: Adding scrollwheel support
[  1708.619] (**) evdev: Logitech Unifying Device. Wireless PID:2011: YAxisMapping: buttons 4 and 5
[  1708.619] (**) evdev: Logitech Unifying Device. Wireless PID:2011: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[  1708.619] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.2/0003:046D:C52B.0006/0003:046D:C52B.0008/input/input19/event16"
[  1708.619] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:2011" (type: KEYBOARD, id 14)
[  1708.619] (**) Option "xkb_rules" "evdev"
[  1708.619] (**) Option "xkb_model" "pc105"
[  1708.619] (**) Option "xkb_layout" "fr"
[  1708.619] (**) Option "xkb_variant" "latin9"
[  1708.619] (II) evdev: Logitech Unifying Device. Wireless PID:2011: initialized for relative axes.
[  1708.619] (WW) evdev: Logitech Unifying Device. Wireless PID:2011: ignoring absolute axes.
[  1708.619] (**) Logitech Unifying Device. Wireless PID:2011: (accel) keeping acceleration scheme 1
[  1708.619] (**) Logitech Unifying Device. Wireless PID:2011: (accel) acceleration profile 0
[  1708.619] (**) Logitech Unifying Device. Wireless PID:2011: (accel) acceleration factor: 2.000
[  1708.619] (**) Logitech Unifying Device. Wireless PID:2011: (accel) acceleration threshold: 4
[  1708.620] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event6)
[  1708.620] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[  1708.620] (II) Using input driver 'evdev' for 'Eee PC WMI hotkeys'
[  1708.620] (**) Eee PC WMI hotkeys: always reports core events
[  1708.620] (**) evdev: Eee PC WMI hotkeys: Device: "/dev/input/event6"
[  1708.620] (--) evdev: Eee PC WMI hotkeys: Vendor 0 Product 0
[  1708.620] (--) evdev: Eee PC WMI hotkeys: Found keys
[  1708.620] (II) evdev: Eee PC WMI hotkeys: Configuring as keyboard
[  1708.620] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input9/event6"
[  1708.620] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 15)
[  1708.620] (**) Option "xkb_rules" "evdev"
[  1708.620] (**) Option "xkb_model" "pc105"
[  1708.620] (**) Option "xkb_layout" "fr"
[  1708.620] (**) Option "xkb_variant" "latin9"
[  1708.620] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[  1708.620] (II) No input driver specified, ignoring this device.
[  1708.620] (II) This device may have been added with another device file.
[  1708.620] (II) config/udev: Adding input device MCE IR Keyboard/Mouse (saa7134) (/dev/input/event14)
[  1708.620] (**) MCE IR Keyboard/Mouse (saa7134): Applying InputClass "evdev pointer catchall"
[  1708.620] (**) MCE IR Keyboard/Mouse (saa7134): Applying InputClass "evdev keyboard catchall"
[  1708.620] (II) Using input driver 'evdev' for 'MCE IR Keyboard/Mouse (saa7134)'
[  1708.620] (**) MCE IR Keyboard/Mouse (saa7134): always reports core events
[  1708.620] (**) evdev: MCE IR Keyboard/Mouse (saa7134): Device: "/dev/input/event14"
[  1708.621] (--) evdev: MCE IR Keyboard/Mouse (saa7134): Vendor 0 Product 0
[  1708.621] (--) evdev: MCE IR Keyboard/Mouse (saa7134): Found 3 mouse buttons
[  1708.621] (--) evdev: MCE IR Keyboard/Mouse (saa7134): Found relative axes
[  1708.621] (--) evdev: MCE IR Keyboard/Mouse (saa7134): Found x and y relative axes
[  1708.621] (--) evdev: MCE IR Keyboard/Mouse (saa7134): Found keys
[  1708.621] (II) evdev: MCE IR Keyboard/Mouse (saa7134): Configuring as mouse
[  1708.621] (II) evdev: MCE IR Keyboard/Mouse (saa7134): Configuring as keyboard
[  1708.621] (**) evdev: MCE IR Keyboard/Mouse (saa7134): YAxisMapping: buttons 4 and 5
[  1708.621] (**) evdev: MCE IR Keyboard/Mouse (saa7134): EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[  1708.621] (**) Option "config_info" "udev:/sys/devices/virtual/input/input17/event14"
[  1708.621] (II) XINPUT: Adding extended input device "MCE IR Keyboard/Mouse (saa7134)" (type: KEYBOARD, id 16)
[  1708.621] (**) Option "xkb_rules" "evdev"
[  1708.621] (**) Option "xkb_model" "pc105"
[  1708.621] (**) Option "xkb_layout" "fr"
[  1708.621] (**) Option "xkb_variant" "latin9"
[  1708.621] (II) evdev: MCE IR Keyboard/Mouse (saa7134): initialized for relative axes.
[  1708.621] (**) MCE IR Keyboard/Mouse (saa7134): (accel) keeping acceleration scheme 1
[  1708.621] (**) MCE IR Keyboard/Mouse (saa7134): (accel) acceleration profile 0
[  1708.621] (**) MCE IR Keyboard/Mouse (saa7134): (accel) acceleration factor: 2.000
[  1708.621] (**) MCE IR Keyboard/Mouse (saa7134): (accel) acceleration threshold: 4
[  1708.621] (II) config/udev: Adding input device MCE IR Keyboard/Mouse (saa7134) (/dev/input/mouse0)
[  1708.621] (II) No input driver specified, ignoring this device.
[  1708.621] (II) This device may have been added with another device file.
[  1708.905] (II) intel(0): EDID vendor "AOC", prod id 9270
[  1708.905] (II) intel(0): Using EDID range info for horizontal sync
[  1708.905] (II) intel(0): Using EDID range info for vertical refresh
[  1708.905] (II) intel(0): Printing DDC gathered Modelines:
[  1708.905] (II) intel(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[  1708.905] (II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[  1708.905] (II) intel(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[  1708.905] (II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[  1708.905] (II) intel(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[  1708.905] (II) intel(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[  1708.905] (II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[  1708.905] (II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[  1708.905] (II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[  1708.905] (II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[  1708.905] (II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[  1708.905] (II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[  1708.905] (II) intel(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[  1708.905] (II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[  1708.905] (II) intel(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[  1708.905] (II) intel(0): Modeline "1280x720"x60.0   74.48  1280 1336 1472 1664  720 721 724 746 -hsync +vsync (44.8 kHz e)
[  1708.905] (II) intel(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[  1708.905] (II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[  1708.905] (II) intel(0): Modeline "1440x900"x0.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz e)
[  1708.905] (II) intel(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[  1709.395] (II) intel(0): EDID vendor "AOC", prod id 9270
[  1709.395] (II) intel(0): Using hsync ranges from config file
[  1709.395] (II) intel(0): Using vrefresh ranges from config file
[  1709.395] (II) intel(0): Printing DDC gathered Modelines:
[  1709.395] (II) intel(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[  1709.395] (II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[  1709.395] (II) intel(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[  1709.395] (II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[  1709.395] (II) intel(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[  1709.395] (II) intel(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[  1709.395] (II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[  1709.395] (II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[  1709.395] (II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[  1709.395] (II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[  1709.395] (II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[  1709.395] (II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[  1709.395] (II) intel(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[  1709.395] (II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[  1709.395] (II) intel(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[  1709.395] (II) intel(0): Modeline "1280x720"x60.0   74.48  1280 1336 1472 1664  720 721 724 746 -hsync +vsync (44.8 kHz e)
[  1709.395] (II) intel(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[  1709.395] (II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[  1709.395] (II) intel(0): Modeline "1440x900"x0.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz e)
[  1709.395] (II) intel(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[  1719.824] (II) AIGLX: Suspending AIGLX clients for VT switch
[  1719.825] (II) evdev: MCE IR Keyboard/Mouse (saa7134): Close
[  1719.825] (II) UnloadModule: "evdev"
[  1719.825] (II) evdev: Eee PC WMI hotkeys: Close
[  1719.825] (II) UnloadModule: "evdev"
[  1719.825] (II) evdev: Logitech Unifying Device. Wireless PID:2011: Close
[  1719.825] (II) UnloadModule: "evdev"
[  1719.825] (II) evdev: Logitech Unifying Device. Wireless PID:1024: Close
[  1719.825] (II) UnloadModule: "evdev"
[  1719.825] (II) evdev: C-Media Electronics Inc.       USB PnP Sound Device: Close
[  1719.825] (II) UnloadModule: "evdev"
[  1719.825] (II) evdev: USB Audio Controller: Close
[  1719.826] (II) UnloadModule: "evdev"
[  1719.826] (II) evdev: saa7134 IR (Hauppauge WinTV-HVR: Close
[  1719.826] (II) UnloadModule: "evdev"
[  1719.826] (II) evdev: HP Webcam HD 4310: Close
[  1719.826] (II) UnloadModule: "evdev"
[  1719.826] (II) evdev: Power Button: Close
[  1719.826] (II) UnloadModule: "evdev"
[  1719.826] (II) evdev: Video Bus: Close
[  1719.826] (II) UnloadModule: "evdev"
[  1719.826] (II) evdev: Power Button: Close
[  1719.826] (II) UnloadModule: "evdev"
[  1719.842] (EE) Server terminated successfully (0). Closing log file.
 

Dernière modification par Debian Alain (23-05-2017 22:03:00)

Hors ligne

#46 23-05-2017 22:18:41

Debian Alain
Membre
Lieu : BREST 29200
Distrib. : DEBIAN 9 STRETCH
Noyau : Linux 4.9.0-3-amd64
(G)UI : GNOME
Inscription : 11-03-2017

Re : ecran hp lp3065

comme sa désinstallation n'a rien changé ,

je le remets

apt-get -t jessie-backports install xserver-xorg-video-intel



vu qu'il y était à l'origine

Hors ligne

#47 23-05-2017 23:02:32

èfpé
Membre
Inscription : 10-07-2016

Re : ecran hp lp3065

Re-,

Alors si je comprends bien, tu as redémarré sur le noyau 4.9, et la sortie qui s'appelait HDMI-0 avec le noyau 3.16 s'appelle VIRTUAL1 avec le noyau 4.9 (à moins que ce ne soit l'inverse... sportif ce fil de discussion big_smile) ; quoi qu'il en soit, xrandr ne fournit aucune information (genre EDID) concernant le moniteur sad

Par ailleurs le premier retour du post #21 montre que le paquet xserver-xorg-video-intel n'était pas installé hier en début de soirée, mais bon, pourrais-tu poster le retour des commandes suivantes :

lspci -k | grep -A2 VGA

et

cat /etc/X11/xorg.conf


Il est hautement probable que le fichier xorg.conf n'existe pas (il n'existe plus par défaut depuis Debian 8).
Quant au problème initial, as-tu envisagé d'installer une « vraie » carte graphique, as-tu un slot PCIe libre ?

Dernière modification par èfpé (24-05-2017 00:18:32)

Hors ligne

#48 23-05-2017 23:51:36

Debian Alain
Membre
Lieu : BREST 29200
Distrib. : DEBIAN 9 STRETCH
Noyau : Linux 4.9.0-3-amd64
(G)UI : GNOME
Inscription : 11-03-2017

Re : ecran hp lp3065

lspci -k | grep -A2 VGA


00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
  Subsystem: ASUSTeK Computer Inc. Device 84ca
  Kernel driver in use: i915
 



cat /etc/X11/xorg.conf


cat: /etc/X11/xorg.conf: Aucun fichier ou dossier de ce type



sinon , je pense actuellement à m'équiper d'une carte graphique

je pense à celles là :
http://www.sapphiretech.com/productdeti … 9&lang=eng
https://www.grosbill.com/4-sapphire_amd … _graphique

http://www.sapphiretech.com/productdeti … 4&lang=eng
https://www.grosbill.com/4-sapphire_amd … atique-ati

mais avant , il faut que je fasse du rangement dans mon boîtier

celles là sont pas mal  non plus . surtout , pas chères
http://www.materiel.net/carte-graphique … aracDetail
https://www.amazon.fr/dp/B01AY78MLM/ref … B01AY7927A

Dernière modification par Debian Alain (24-05-2017 00:53:46)

Hors ligne

#49 24-05-2017 03:02:47

robert2a
Membre
Lieu : France
Distrib. : Stretch 9
Noyau : Linux 4.9.0-3 4.9.30-2
(G)UI : Mate
Inscription : 15-11-2014

Re : ecran hp lp3065

Bonsoir

tu est sur un pc fixe avec un gpu intégré sur un cpu intel socket 1155 .
tu est sous jessie 8.8 avec les backports
des fois c'est bon de lire tout  hmm
pour ma remarque sur le log bidon ça change a partir de stretch avec gnome

pourquoi tu est en vga ? (sur le vieux log de avril )


[  1708.539] (II) intel(0): Printing probed modes for output VGA1
 


ma carte mere en socket 1155 a un connecteur DVI + VGA
comment tu fonctionne ?  => https://nvidia.zendesk.com/hc/fr/articl … I-et-DVI-D-

ton écran (sur le vieux log avril pas le bon )


[  1708.538] (II) intel(0): EDID for output VGA1
[  1708.538] (II) intel(0): Manufacturer: AOC  Model: 2436  Serial#: 80483
[  1708.538] (II) intel(0): Year: 2011  Week: 40
[  1708.538] (II) intel(0): EDID Version: 1.3
[  1708.538] (II) intel(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
[  1708.538] (II) intel(0): Sync:  Separate
[  1708.538] (II) intel(0): Max Image Size [cm]: horiz.: 52  vert.: 29
[  1708.538] (II) intel(0): Gamma: 2.20
[  1708.538] (II) intel(0): DPMS capabilities: Off; RGB/Color Display
 



le log de Mai 2017


[  1708.541] (II) intel(0): Output VGA1 connected
 


un 30 pouces en VGA vers un écran DVI-D  ?    hmm
idem VGA et DVI-D

(log du 23 mai 2017)


[    42.937] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20160919
 


et ensuite j'ai le module modesetting qui est déchargé (toujours pour le log du 23 Mai)


[    42.958] (II) UnloadModule: "modesetting"
[    42.958] (II) Unloading modesetting
[    42.958] (II) UnloadModule: "fbdev"
[    42.958] (II) Unloading fbdev
[    42.958] (II) UnloadSubModule: "fbdevhw"
[    42.958] (II) Unloading fbdevhw
[    42.958] (II) UnloadModule: "vesa"
[    42.958] (II) Unloading vesa
 



avec le noyau 4.9 des backports j'espère que KMS n'utilise pas le xserver-xorg-video-modesettings  (bon trés longtemps que je n installe plus jessie)

Dernière modification par robert2a (24-05-2017 08:27:10)

En ligne

#50 24-05-2017 03:19:33

robert2a
Membre
Lieu : France
Distrib. : Stretch 9
Noyau : Linux 4.9.0-3 4.9.30-2
(G)UI : Mate
Inscription : 15-11-2014

Re : ecran hp lp3065

Debian Alain a écrit :

bonjour les gars .

je vous écrit car j'ai un petit problème : sad

voilà , je me suis équipé d'un écran HP LP3065 (30 pouces) cool

très bel écran mais , linux ne me donne comme résolution que 1280x800@60hz 16:10 roll

alors que ma carte mère est donnée comme pouvant supporter 1920x1200@60 hz lol

la résolution automatique de jessie ne dépasse pas les 1280 . sad

comment modifier la résolution ? https://debian-facile.org/img/smilies/x … _panic.gif

carte mère ASUS P8Z77V LX
socket lga 1155 µp i7 2600 2ème génération
ram 2x8GO soit 16 GO en tout



je reprend ton premier post , le 1280x800 c'est une limitation du a l absence d un driver  , ou un driver qui fonctionne mal
de plus je vois que le 1920 existe sur le log

de mieux en mieux   roll  (sur le vieux log d Avril)


[  1708.135] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied
 



et la punition  tongue  (sur le log de Mai )


[    74.986] (II) intel(0): resizing framebuffer to 1280x800
[    74.987] (II) intel(0): switch to mode 1280x800@59.9 on HDMI1 using pipe 0, position (0, 0), rotation normal, reflection none
 



sur l ancien log archivé tu vois bien que la résolution maximale correspond a ce que tu attend (mais avec le vieux écran )


[  1708.539] (II) intel(0): Printing probed modes for output VGA1
[  1708.539] (II) intel(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
 



j'ai sortie la doc de ma carte Asus P8H77-M
pour la connectique


vga max => 2048 x 1536  75hz
hdmi max 1920 x 1200  60hz
dvi  max 1920 x 1200  60 hz
 


cette carte fonctionne trés bien en stretch avec une GTX1060 3Go

les caractéristiques de l'écran


Écran PC HP LP3065 - Caractéristiques détaillées

Technologie de dalle     TN
Diagonale     30" (76 cm)
Résolution     2560 x 1600 (WQXGA)
Format     Large (16:10)
Pitch     0,250 mm
Fréquence de rafraîchissement maximale     60 Hz
Angles de vision (H°/V°)     178°/178°
Luminosité     300 cd/m²
Rapport de contraste natif     1000:1
Temps de réponse (noir-à-noir)     12 ms
Dalle anti-reflets     Non
Spécificités gaming
3D     Non
Connectique vidéo
DVI     DVI-D Dual-Link (x3)
Connectique diverse
Hub USB     Hub USB 2.0 (x4)
Ergonomie
Inclinaison avant/arrière     Oui
 



a lire pour les avantages du DVI sur le VGA
https://fr.wikipedia.org/wiki/Digital_visual_interface

pour conclure on a inventé stretch et ça fonctionne bien et simple a utiliser  wink
pour jessie et la partie video du serveur X
avec le noyau 4.9.0-2
on supprime le driver intel et modesettings , je parle des xserver-xorg-video-xxx  ,
(par contre je me souvient plus si le xserver-xorg-core de jessie va fournir le paquet virtuel intel )
dés le démarrage (aprés la sélection de grub ) l'écran doit etre a sa résolution native donc a minima 1920 x 1200 (en DVI )
si l'écran le supporte ou moins jusqu a l invite de logging et  jusqu au bureau
on vérifie le log que c'est bien le driver KMS , attention dans le log il y aura de l intel (driver virtuel )  mais le driver utilisé sera KMS
ps: il sera noté que xserver-xorg-video-intel a échoué ( le paquet est absent )
la version de KMS sera celle de stretch (adapté pour les backports de jessie ) du noyau 4.9.0-2 
(si le paquet modesetting  (jessie) est nécessaire tu te retrouvera en VESA )  tongue

la résolution maximale de l'écran  =>  Résolution     2560 x 1600 (WQXGA)
donc meme en VGA ton gpu intel ne va pas arriver a la résolution maximale de l'écran  (les icones du bureau risque d'etre bien visible  tongue  )

ps : en fonction de ce qui est disponible coté gpu et ce que supporte l'écran , le système choisi le meilleur compromis.
donc peut etre voir a s'équiper d une bonne carte graphique pour profiter de ce 30 pouces

une petite remarque
le log Xorg.1.log est assez ancien  (22 Avril 2017 ) et pas le meme écran surement


[  1708.134] (==) Log file: "/var/log/Xorg.1.log", Time: Sat Apr 22 19:54:31 2017
 


un peu de lecture pour la différence entre KMS et xorg  .
https://packages.debian.org/fr/jessie/x … odesetting

https://packages.debian.org/fr/stretch/ … odesetting

comme le paquet virtuel est fourni par  => https://packages.debian.org/fr/stretch/ … -xorg-core
il me semble que stretch est plus moderne en terme de version que jessie (avec un noyau 4.9 ) mais bon c'est un autre débat  smile
le firmware-misc-nonfree prend en charge ce gpu ?  (pas vérifié )

Enfin c'est un casse tete ton problème  roll    , j'ai pris ma dose de log  =>  out.gif
re,
la différence de version de KMS entre stretch et jessie (d'aprés ton log du 23 Mai )
version de KMS sur stretch


[    28.967] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    28.967] (II) Module modesetting: vendor="X.Org Foundation"
[    28.967]  compiled for 1.19.2, module version = 1.19.2
[    28.967]  Module class: X.Org Video Driver
[    28.967]  ABI class: X.Org Video Driver, version 23.0  => fichier virtuel
 


version de KMS sur Jessie


[  1708.138] (II) LoadModule: "modesetting"
[  1708.138] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[  1708.138] (II) Module modesetting: vendor="X.Org Foundation"
[  1708.138]  compiled for 1.16.4, module version = 0.9.0
[  1708.138]  Module class: X.Org Video Driver
[  1708.138]  ABI class: X.Org Video Driver, version 18.0  => fichier virtuel
 



et si tu peu m'expliquer comment fonctionne une sortie VGA (analogique) vers une entrée DVI-D (numérique )  roll

Dernière modification par robert2a (24-05-2017 09:09:25)

En ligne

Pied de page des forums