Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#1 18-04-2018 11:36:53

Debion
Membre
Distrib. : Debian 9.4.0 Stretch
Noyau : Linux 4.9.0-6-amd64
(G)UI : Cinnamon 3.2.7
Inscription : 24-02-2018

Problème Pad PC Portable [Résolu]

Bonjour,

Je possède actuellement un ordinateur portable Asus avec Debian 8.

Le problème, c'est qu'il ne fonctionne qu'avec une souris. Le pad tactile ne fonctionne pas.

Comment faire car avant sous Windows, et il fonctionnait ?

Merci d'avance.

Dernière modification par Debion (01-05-2018 10:09:46)


Utilisateur de Linux ! Vive Linux !
Mon ordi : Asus K501LX / Intel Core i5 5200U / Nvidia Geforce GTX 950M 2 Go / 8 Go DDR3L
Debian 9.4.0 Stretch
Raspberry Pi 3 B+ / Raspberry Pi Zero W

Hors ligne

#2 19-04-2018 19:35:30

Croutons
Membre
Distrib. : Handylinux 2.5 vers Jessie et Debian Stretch
Noyau : Linux 3.16.0-4-686-pae, Linux 4.9.0-7-686-pae
(G)UI : xfce
Inscription : 16-12-2016

Re : Problème Pad PC Portable [Résolu]

Bonjour vois peut être du coté du wiki
https://debian-facile.org/doc:materiel:touchpad

-->les cahiers du debutant<--      WikiDF-->Découvrir les principales commandes Linux<--
L' expérience, c'est le nom que chacun donne à ses erreurs. Oscar Wilde

Hors ligne

#3 20-04-2018 08:40:10

Jean-Pierre Pinson
Membre
Lieu : Orléans
Distrib. : Trisquel 8 64bits Ordi.: Thinkpad T400
Noyau : 4.4.0-64-generic x86_64
(G)UI : xfce
Inscription : 04-03-2017

Re : Problème Pad PC Portable [Résolu]

merci Croutons smile

Trisquel 8 64bits  Ordi.: Thinkpad T400
Bureau : xfce
Ordinateur : Thinkpad T400 libreboot

Hors ligne

#4 23-04-2018 19:07:37

Debion
Membre
Distrib. : Debian 9.4.0 Stretch
Noyau : Linux 4.9.0-6-amd64
(G)UI : Cinnamon 3.2.7
Inscription : 24-02-2018

Re : Problème Pad PC Portable [Résolu]

Malheureusement la solution n'est pas dans ce wiki car je ne veux pas le paramétrer mais l'activer. Car il n'est pas reconnu.

Merci d'avance !

Utilisateur de Linux ! Vive Linux !
Mon ordi : Asus K501LX / Intel Core i5 5200U / Nvidia Geforce GTX 950M 2 Go / 8 Go DDR3L
Debian 9.4.0 Stretch
Raspberry Pi 3 B+ / Raspberry Pi Zero W

Hors ligne

#5 23-04-2018 20:51:15

smolski
administrateur quasi...modo
Lieu : AIN
Distrib. : 9 (stretch) 64 bits + backports
Noyau : 4.9.65-3+deb9u2
(G)UI : gnome
Inscription : 21-10-2008

Re : Problème Pad PC Portable [Résolu]

Debion a écrit :

Car il n'est pas reconnu.


Précision ?
Tu sais qu'il n'est pas reconnu comment ? smile


"Théo et Adama te rappellent pourquoi Zyed et Bouna couraient…"
"L'utopie ne signifie pas l'irréalisable, mais l'irréalisée." - T Monod (source :  La zone de Siné)
"Je peux rire de tout mais pas avec n'importe qui." - P Desproges
"saque eud dun" (patois chtimi : fonce dedans)

Hors ligne

#6 24-04-2018 20:10:19

Debion
Membre
Distrib. : Debian 9.4.0 Stretch
Noyau : Linux 4.9.0-6-amd64
(G)UI : Cinnamon 3.2.7
Inscription : 24-02-2018

Re : Problème Pad PC Portable [Résolu]

Car dans préfèrence de la souris section pavé tactile du centre de contrôle, il est affiché que le pavé tactile est activé alors qu'il ne fonctionne pas.

Le curseur de ma souris ne bouge qu'avec une souris en périphérique.

J'ai installé hardinfo, dans les entrées indiquées dans le sommaire, il y a inscrit " ETPS/2 Elantech TouchPad.

Je n'arrive pas à régler le problème.

Merci d'avance !

Utilisateur de Linux ! Vive Linux !
Mon ordi : Asus K501LX / Intel Core i5 5200U / Nvidia Geforce GTX 950M 2 Go / 8 Go DDR3L
Debian 9.4.0 Stretch
Raspberry Pi 3 B+ / Raspberry Pi Zero W

Hors ligne

#7 24-04-2018 21:18:42

èfpé
Membre
Inscription : 10-07-2016

Re : Problème Pad PC Portable [Résolu]

Bonsoir Debion,

Il est possible que ce portable soit un petit peu trop récent pour le noyau 3.16 (2014 Q3) de Debian 8 Jessie :

dmesg | grep -i dmi:


Nous en donnera les références exactes. L'Intel Core i5-5200U et la GeForce GTX 950M datent de 2015 Q1 !

Hors ligne

#8 25-04-2018 20:55:08

Debion
Membre
Distrib. : Debian 9.4.0 Stretch
Noyau : Linux 4.9.0-6-amd64
(G)UI : Cinnamon 3.2.7
Inscription : 24-02-2018

Re : Problème Pad PC Portable [Résolu]

 dmesg | grep -i dmi:



donne

 [    0.000000] DMI: ASUSTeK COMPUTER INC. K501LX/K501LX, BIOS K501LX.206 09/16/2015



Voilà la réponses.

Merci d'avance !


Utilisateur de Linux ! Vive Linux !
Mon ordi : Asus K501LX / Intel Core i5 5200U / Nvidia Geforce GTX 950M 2 Go / 8 Go DDR3L
Debian 9.4.0 Stretch
Raspberry Pi 3 B+ / Raspberry Pi Zero W

Hors ligne

#9 25-04-2018 21:26:42

èfpé
Membre
Inscription : 10-07-2016

Re : Problème Pad PC Portable [Résolu]

Re-,

OK ; année 2015 donc... il pourrait être intéressant de voir le retour des commandes suivantes,

apt-cache policy xserver-xorg-input-synaptics

cat /var/log/Xorg.0.log


apt-get install xinput

xinput --list-props "ETPS/2 Elantech Touchpad"


Le paquet xserver-xorg-input-synaptics est vraisemblablement installé mais on peut le vérifier...

Et avant d'aller plus loin, tu pourrais tester en Live Debian 9 MATE (ici), voire DFLinux-Stretch !

Dernière modification par èfpé (26-04-2018 13:26:42)

Hors ligne

#10 28-04-2018 19:38:48

Debion
Membre
Distrib. : Debian 9.4.0 Stretch
Noyau : Linux 4.9.0-6-amd64
(G)UI : Cinnamon 3.2.7
Inscription : 24-02-2018

Re : Problème Pad PC Portable [Résolu]

Bonsoir !

Réponse à

 apt-cache policy xserver-xorg-input-synaptics



 xserver-xorg-input-synaptics:
  Installé : 1.8.1-1
  Candidat : 1.8.1-1
 Table de version :
 *** 1.8.1-1 0
        500 http://httpredir.debian.org/debian/ jessie/main amd64 Packages
        500 http://ftp.fr.debian.org/debian/ jessie/main amd64 Packages
        100 /var/lib/dpkg/status



-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Réponse à

 cat /var/log/Xorg.0.log




[    19.485]
X.Org X Server 1.16.4
Release Date: 2014-12-20
[    19.485] X Protocol Version 11, Revision 0
[    19.485] Build Operating System: Linux 4.9.0-4-amd64 x86_64 Debian
[    19.486] Current Operating System: Linux Artos 3.16.0-5-amd64 #1 SMP Debian 3.16.51-3+deb8u1 (2018-01-08) x86_64
[    19.486] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-5-amd64 root=UUID=f496c32f-a49f-4f8c-b8bd-b9245741b3ab ro quiet
[    19.486] Build Date: 14 October 2017  10:41:31AM
[    19.486] xorg-server 2:1.16.4-1+deb8u2 (http://www.debian.org/support)
[    19.486] Current version of pixman: 0.32.6
[    19.486]  Before reporting problems, check http://wiki.x.org
  to make sure that you have the latest version.
[    19.486] Markers: (--) probed, (**) from config file, (==) default setting,
  (++) from command line, (!!) notice, (II) informational,
  (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    19.486] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Apr 28 19:25:34 2018
[    19.607] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    19.721] (==) No Layout section.  Using the first Screen section.
[    19.721] (==) No screen section available. Using defaults.
[    19.721] (**) |-->Screen "Default Screen Section" (0)
[    19.721] (**) |   |-->Monitor "<default monitor>"
[    19.739] (==) No monitor specified for screen "Default Screen Section".
  Using a default monitor configuration.
[    19.739] (==) Automatically adding devices
[    19.739] (==) Automatically enabling devices
[    19.739] (==) Automatically adding GPU devices
[    20.131] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    20.131]  Entry deleted from font path.
[    20.411] (==) FontPath set to:
  /usr/share/fonts/X11/misc,
  /usr/share/fonts/X11/100dpi/:unscaled,
  /usr/share/fonts/X11/75dpi/:unscaled,
  /usr/share/fonts/X11/Type1,
  /usr/share/fonts/X11/100dpi,
  /usr/share/fonts/X11/75dpi,
  built-ins
[    20.411] (==) ModulePath set to "/usr/lib/xorg/modules"
[    20.411] (II) The server relies on udev to provide the list of input devices.
  If no devices become available, reconfigure udev or disable AutoAddDevices.
[    20.457] (II) Loader magic: 0x55b391c75d80
[    20.457] (II) Module ABI versions:
[    20.457]  X.Org ANSI C Emulation: 0.4
[    20.457]  X.Org Video Driver: 18.0
[    20.457]  X.Org XInput driver : 21.0
[    20.457]  X.Org Server Extension : 8.0
[    20.457] (II) xfree86: Adding drm device (/dev/dri/card0)
[    20.458] (--) PCI:*(0:0:2:0) 8086:1616:1043:1acd rev 9, Mem @ 0xa1000000/16777216, 0xb0000000/268435456, I/O @ 0x00005000/64
[    20.458] (--) PCI: (0:4:0:0) 10de:139a:1043:1acd rev 162, Mem @ 0xa2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00003000/128, BIOS @ 0x????????/524288
[    20.459] (II) LoadModule: "glx"
[    20.602] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    20.919] (II) Module glx: vendor="X.Org Foundation"
[    20.919]  compiled for 1.16.4, module version = 1.0.0
[    20.919]  ABI class: X.Org Server Extension, version 8.0
[    20.919] (==) AIGLX enabled
[    20.919] (==) Matched intel as autoconfigured driver 0
[    20.919] (==) Matched intel as autoconfigured driver 1
[    20.919] (==) Matched modesetting as autoconfigured driver 2
[    20.919] (==) Matched fbdev as autoconfigured driver 3
[    20.919] (==) Matched vesa as autoconfigured driver 4
[    20.920] (==) Assigned the driver to the xf86ConfigLayout
[    20.920] (II) LoadModule: "intel"
[    20.920] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    20.972] (II) Module intel: vendor="X.Org Foundation"
[    20.972]  compiled for 1.15.99.904, module version = 2.21.15
[    20.972]  Module class: X.Org Video Driver
[    20.972]  ABI class: X.Org Video Driver, version 18.0
[    20.972] (II) LoadModule: "modesetting"
[    20.973] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    20.992] (II) Module modesetting: vendor="X.Org Foundation"
[    20.992]  compiled for 1.16.4, module version = 0.9.0
[    20.992]  Module class: X.Org Video Driver
[    20.992]  ABI class: X.Org Video Driver, version 18.0
[    20.992] (II) LoadModule: "fbdev"
[    20.992] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    21.002] (II) Module fbdev: vendor="X.Org Foundation"
[    21.002]  compiled for 1.15.99.904, module version = 0.4.4
[    21.002]  Module class: X.Org Video Driver
[    21.002]  ABI class: X.Org Video Driver, version 18.0
[    21.002] (II) LoadModule: "vesa"
[    21.002] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    21.011] (II) Module vesa: vendor="X.Org Foundation"
[    21.011]  compiled for 1.15.99.904, module version = 2.3.3
[    21.011]  Module class: X.Org Video Driver
[    21.011]  ABI class: X.Org Video Driver, version 18.0
[    21.011] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
  i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
  915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
  Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
  GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
  HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
  HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
  HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
  HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
[    21.027] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    21.027] (II) FBDEV: driver for framebuffer: fbdev
[    21.027] (II) VESA: driver for VESA chipsets: vesa
[    21.027] (++) using VT number 7

[    21.032] (WW) Falling back to old probe method for modesetting
[    21.032] (WW) Falling back to old probe method for fbdev
[    21.032] (II) Loading sub module "fbdevhw"
[    21.032] (II) LoadModule: "fbdevhw"
[    21.033] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    21.289] (II) Module fbdevhw: vendor="X.Org Foundation"
[    21.289]  compiled for 1.16.4, module version = 0.0.2
[    21.289]  ABI class: X.Org Video Driver, version 18.0
[    21.290] (WW) Falling back to old probe method for vesa
[    21.290] (II) intel(0): Creating default Display subsection in Screen section
  "Default Screen Section" for depth/fbbpp 24/32
[    21.290] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    21.290] (==) intel(0): RGB weight 888
[    21.290] (==) intel(0): Default visual is TrueColor
[    21.290] (WW) intel(0): Unknown chipset
[    21.290] (**) intel(0): Relaxed fencing disabled
[    21.290] (**) intel(0): Wait on SwapBuffers? enabled
[    21.290] (**) intel(0): Triple buffering? enabled
[    21.290] (**) intel(0): Framebuffer linear
[    21.290] (**) intel(0): Pixmaps tiled
[    21.290] (**) intel(0): 3D buffers tiled
[    21.290] (**) intel(0): SwapBuffers wait enabled
[    21.290] (==) intel(0): video overlay key set to 0x101fe
[    21.290] (II) intel(0): Output eDP1 has no monitor section
[    21.290] (--) intel(0): found backlight control interface /sys/class/backlight/intel_backlight
[    21.344] (II) intel(0): Output DP1 has no monitor section
[    21.344] (II) intel(0): Output HDMI1 has no monitor section
[    21.345] (II) intel(0): Output HDMI2 has no monitor section
[    21.345] (II) intel(0): EDID for output eDP1
[    21.345] (II) intel(0): Manufacturer: CMN  Model: 15c4  Serial#: 0
[    21.345] (II) intel(0): Year: 2013  Week: 40
[    21.345] (II) intel(0): EDID Version: 1.4
[    21.345] (II) intel(0): Digital Display Input
[    21.345] (II) intel(0): 6 bits per channel
[    21.345] (II) intel(0): Digital interface is DisplayPort
[    21.345] (II) intel(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[    21.345] (II) intel(0): Gamma: 2.20
[    21.345] (II) intel(0): No DPMS capabilities specified
[    21.345] (II) intel(0): Supported color encodings: RGB 4:4:4
[    21.345] (II) intel(0): First detailed timing is preferred mode
[    21.345] (II) intel(0): Preferred mode is native pixel format and refresh rate
[    21.345] (II) intel(0): redX: 0.565 redY: 0.330   greenX: 0.323 greenY: 0.577
[    21.345] (II) intel(0): blueX: 0.160 blueY: 0.145   whiteX: 0.313 whiteY: 0.329
[    21.345] (II) intel(0): Manufacturer's mask: 0
[    21.345] (II) intel(0): Supported detailed timing:
[    21.345] (II) intel(0): clock: 136.6 MHz   Image Size:  344 x 193 mm
[    21.345] (II) intel(0): h_active: 1920  h_sync: 1964  h_sync_end 1992 h_blank_end 2070 h_border: 0
[    21.345] (II) intel(0): v_active: 1080  v_sync: 1082  v_sync_end 1086 v_blanking: 1100 v_border: 0
[    21.345] (II) intel(0):  N156HGE-EAB
[    21.345] (II) intel(0):  CMN
[    21.345] (II) intel(0):  N156HGE-EAB
[    21.345] (II) intel(0): EDID (in hex):
[    21.345] (II) intel(0):   00ffffffffffff000daec41500000000
[    21.345] (II) intel(0):   281701049522137802ef059054529329
[    21.345] (II) intel(0):   25505400000001010101010101010101
[    21.345] (II) intel(0):   0101010101015e358096703814402c1c
[    21.345] (II) intel(0):   240058c110000018000000fe004e3135
[    21.345] (II) intel(0):   364847452d4541420a20000000fe0043
[    21.345] (II) intel(0):   4d4e0a202020202020202020000000fe
[    21.345] (II) intel(0):   004e3135364847452d4541420a20001d
[    21.345] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[    21.345] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    21.345] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    21.345] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[    21.345] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[    21.345] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[    21.345] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[    21.345] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[    21.345] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[    21.345] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[    21.345] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[    21.345] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[    21.345] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[    21.345] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[    21.345] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[    21.345] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[    21.345] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[    21.345] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[    21.345] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[    21.345] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[    21.345] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[    21.345] (II) intel(0): Printing probed modes for output eDP1
[    21.345] (II) intel(0): Modeline "1920x1080"x60.0  136.62  1920 1964 1992 2070  1080 1082 1086 1100 -hsync -vsync (66.0 kHz eP)
[    21.345] (II) intel(0): Modeline "1920x1080"x59.9  138.50  1920 1968 2000 2080  1080 1083 1088 1111 +hsync -vsync (66.6 kHz d)
[    21.345] (II) intel(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz d)
[    21.345] (II) intel(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz d)
[    21.345] (II) intel(0): Modeline "1600x1024"x60.2  103.12  1600 1600 1656 1664  1024 1024 1029 1030 +hsync +vsync (62.0 kHz d)
[    21.345] (II) intel(0): Modeline "1400x1050"x60.0  122.00  1400 1488 1640 1880  1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[    21.345] (II) intel(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[    21.345] (II) intel(0): Modeline "1440x900"x59.9  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz d)
[    21.345] (II) intel(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz d)
[    21.345] (II) intel(0): Modeline "1360x768"x59.8   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsync (47.7 kHz d)
[    21.345] (II) intel(0): Modeline "1360x768"x60.0   72.00  1360 1408 1440 1520  768 771 781 790 +hsync -vsync (47.4 kHz d)
[    21.345] (II) intel(0): Modeline "1152x864"x60.0   81.62  1152 1216 1336 1520  864 865 868 895 -hsync +vsync (53.7 kHz d)
[    21.345] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[    21.345] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    21.345] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    21.345] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[    21.400] (II) intel(0): EDID for output DP1
[    21.400] (II) intel(0): EDID for output HDMI1
[    21.401] (II) intel(0): EDID for output HDMI2
[    21.401] (II) intel(0): Output eDP1 connected
[    21.401] (II) intel(0): Output DP1 disconnected
[    21.401] (II) intel(0): Output HDMI1 disconnected
[    21.401] (II) intel(0): Output HDMI2 disconnected
[    21.401] (II) intel(0): Using exact sizes for initial modes
[    21.401] (II) intel(0): Output eDP1 using initial mode 1920x1080
[    21.401] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    21.401] (II) intel(0): Kernel page flipping support detected, enabling
[    21.401] (==) intel(0): DPI set to (96, 96)
[    21.401] (II) Loading sub module "fb"
[    21.401] (II) LoadModule: "fb"
[    21.423] (II) Loading /usr/lib/xorg/modules/libfb.so
[    21.439] (II) Module fb: vendor="X.Org Foundation"
[    21.440]  compiled for 1.16.4, module version = 1.0.0
[    21.440]  ABI class: X.Org ANSI C Emulation, version 0.4
[    21.440] (II) Loading sub module "dri2"
[    21.440] (II) LoadModule: "dri2"
[    21.440] (II) Module "dri2" already built-in
[    21.440] (II) UnloadModule: "modesetting"
[    21.440] (II) Unloading modesetting
[    21.440] (II) UnloadModule: "fbdev"
[    21.440] (II) Unloading fbdev
[    21.440] (II) UnloadSubModule: "fbdevhw"
[    21.440] (II) Unloading fbdevhw
[    21.440] (II) UnloadModule: "vesa"
[    21.440] (II) Unloading vesa
[    21.440] (==) Depth 24 pixmap format is 32 bpp
[    21.440] (WW) intel(0): cannot enable DRI2 whilst forcing software fallbacks
[    21.440] (II) intel(0): Allocated new frame buffer 1920x1080 stride 7680, untiled
[    21.457] (II) UXA(0): Driver registered support for the following operations:
[    21.457] (II)         solid
[    21.457] (II)         copy
[    21.457] (II)         composite (RENDER acceleration)
[    21.457] (II)         put_image
[    21.457] (II)         get_image
[    21.457] (==) intel(0): Backing store enabled
[    21.458] (==) intel(0): Silken mouse enabled
[    21.458] (II) intel(0): Initializing HW Cursor
[    21.458] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    21.458] (==) intel(0): DPMS enabled
[    21.459] (==) intel(0): Intel XvMC decoder disabled
[    21.459] (WW) intel(0): Disabling Xv because no adaptors could be initialized.
[    21.459] (II) intel(0): direct rendering: Failed
[    21.459] (==) intel(0): hotplug detection: "enabled"
[    21.480] (--) RandR disabled
[    21.543] (II) SELinux: Disabled on system
[    21.546] (II) AIGLX: Screen 0 is not DRI2 capable
[    21.546] (EE) AIGLX: reverting to software rendering
[    22.183] (II) AIGLX: Loaded and initialized swrast
[    22.183] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[    22.183] (II) intel(0): Setting screen physical size to 508 x 285
[    22.943] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[    22.943] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    22.943] (II) LoadModule: "evdev"
[    22.944] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    23.072] (II) Module evdev: vendor="X.Org Foundation"
[    23.072]  compiled for 1.16.0, module version = 2.9.0
[    23.072]  Module class: X.Org XInput Driver
[    23.072]  ABI class: X.Org XInput driver, version 21.0
[    23.072] (II) Using input driver '
evdev' for 'Power Button'
[    23.072] (**) Power Button: always reports core events
[    23.072] (**) evdev: Power Button: Device: "/dev/input/event5"
[    23.072] (--) evdev: Power Button: Vendor 0 Product 0x1
[    23.072] (--) evdev: Power Button: Found keys
[    23.072] (II) evdev: Power Button: Configuring as keyboard
[    23.072] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event5"
[    23.072] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    23.072] (**) Option "xkb_rules" "evdev"
[    23.072] (**) Option "xkb_model" "pc105"
[    23.072] (**) Option "xkb_layout" "fr"
[    23.072] (**) Option "xkb_variant" "latin9"
[    23.229] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[    23.229] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    23.229] (II) Using input driver '
evdev' for 'Video Bus'
[    23.229] (**) Video Bus: always reports core events
[    23.229] (**) evdev: Video Bus: Device: "/dev/input/event9"
[    23.229] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    23.229] (--) evdev: Video Bus: Found keys
[    23.229] (II) evdev: Video Bus: Configuring as keyboard
[    23.229] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10/event9"
[    23.229] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    23.229] (**) Option "xkb_rules" "evdev"
[    23.229] (**) Option "xkb_model" "pc105"
[    23.229] (**) Option "xkb_layout" "fr"
[    23.229] (**) Option "xkb_variant" "latin9"
[    23.230] (II) config/udev: Adding input device Video Bus (/dev/input/event10)
[    23.230] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    23.230] (II) Using input driver '
evdev' for 'Video Bus'
[    23.230] (**) Video Bus: always reports core events
[    23.230] (**) evdev: Video Bus: Device: "/dev/input/event10"
[    23.230] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    23.230] (--) evdev: Video Bus: Found keys
[    23.230] (II) evdev: Video Bus: Configuring as keyboard
[    23.230] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:22/LNXVIDEO:01/input/input11/event10"
[    23.230] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[    23.230] (**) Option "xkb_rules" "evdev"
[    23.230] (**) Option "xkb_model" "pc105"
[    23.230] (**) Option "xkb_layout" "fr"
[    23.230] (**) Option "xkb_variant" "latin9"
[    23.230] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[    23.230] (II) No input driver specified, ignoring this device.
[    23.230] (II) This device may have been added with another device file.
[    23.230] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
[    23.230] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    23.230] (II) Using input driver '
evdev' for 'Sleep Button'
[    23.230] (**) Sleep Button: always reports core events
[    23.230] (**) evdev: Sleep Button: Device: "/dev/input/event4"
[    23.230] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    23.230] (--) evdev: Sleep Button: Found keys
[    23.230] (II) evdev: Sleep Button: Configuring as keyboard
[    23.230] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5/event4"
[    23.230] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[    23.230] (**) Option "xkb_rules" "evdev"
[    23.230] (**) Option "xkb_model" "pc105"
[    23.231] (**) Option "xkb_layout" "fr"
[    23.231] (**) Option "xkb_variant" "latin9"
[    23.231] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event11)
[    23.231] (II) No input driver specified, ignoring this device.
[    23.231] (II) This device may have been added with another device file.
[    23.231] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event12)
[    23.231] (II) No input driver specified, ignoring this device.
[    23.231] (II) This device may have been added with another device file.
[    23.231] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event13)
[    23.231] (II) No input driver specified, ignoring this device.
[    23.231] (II) This device may have been added with another device file.
[    23.231] (II) config/udev: Adding input device MOSART Semi. 2.4G Wireless Mouse (/dev/input/event1)
[    23.232] (**) MOSART Semi. 2.4G Wireless Mouse: Applying InputClass "evdev pointer catchall"
[    23.232] (II) Using input driver '
evdev' for 'MOSART Semi. 2.4G Wireless Mouse'
[    23.232] (**) MOSART Semi. 2.4G Wireless Mouse: always reports core events
[    23.232] (**) evdev: MOSART Semi. 2.4G Wireless Mouse: Device: "/dev/input/event1"
[    23.232] (--) evdev: MOSART Semi. 2.4G Wireless Mouse: Vendor 0x3938 Product 0x1031
[    23.232] (--) evdev: MOSART Semi. 2.4G Wireless Mouse: Found 9 mouse buttons
[    23.232] (--) evdev: MOSART Semi. 2.4G Wireless Mouse: Found scroll wheel(s)
[    23.232] (--) evdev: MOSART Semi. 2.4G Wireless Mouse: Found relative axes
[    23.232] (--) evdev: MOSART Semi. 2.4G Wireless Mouse: Found x and y relative axes
[    23.232] (--) evdev: MOSART Semi. 2.4G Wireless Mouse: Found absolute axes
[    23.232] (II) evdev: MOSART Semi. 2.4G Wireless Mouse: Forcing absolute x/y axes to exist.
[    23.232] (II) evdev: MOSART Semi. 2.4G Wireless Mouse: Configuring as mouse
[    23.232] (II) evdev: MOSART Semi. 2.4G Wireless Mouse: Adding scrollwheel support
[    23.232] (**) evdev: MOSART Semi. 2.4G Wireless Mouse: YAxisMapping: buttons 4 and 5
[    23.232] (**) evdev: MOSART Semi. 2.4G Wireless Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    23.232] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:3938:1031.0001/input/input3/event1"
[    23.232] (II) XINPUT: Adding extended input device "MOSART Semi. 2.4G Wireless Mouse" (type: MOUSE, id 10)
[    23.232] (II) evdev: MOSART Semi. 2.4G Wireless Mouse: initialized for relative axes.
[    23.232] (WW) evdev: MOSART Semi. 2.4G Wireless Mouse: ignoring absolute axes.
[    23.232] (**) MOSART Semi. 2.4G Wireless Mouse: (accel) keeping acceleration scheme 1
[    23.232] (**) MOSART Semi. 2.4G Wireless Mouse: (accel) acceleration profile 0
[    23.232] (**) MOSART Semi. 2.4G Wireless Mouse: (accel) acceleration factor: 2.000
[    23.232] (**) MOSART Semi. 2.4G Wireless Mouse: (accel) acceleration threshold: 4
[    23.233] (II) config/udev: Adding input device MOSART Semi. 2.4G Wireless Mouse (/dev/input/mouse0)
[    23.233] (II) No input driver specified, ignoring this device.
[    23.233] (II) This device may have been added with another device file.
[    23.233] (II) config/udev: Adding input device USB2.0 VGA UVC WebCam (/dev/input/event8)
[    23.233] (**) USB2.0 VGA UVC WebCam: Applying InputClass "evdev keyboard catchall"
[    23.233] (II) Using input driver '
evdev' for 'USB2.0 VGA UVC WebCam'
[    23.233] (**) USB2.0 VGA UVC WebCam: always reports core events
[    23.233] (**) evdev: USB2.0 VGA UVC WebCam: Device: "/dev/input/event8"
[    23.233] (--) evdev: USB2.0 VGA UVC WebCam: Vendor 0x4f2 Product 0xb483
[    23.233] (--) evdev: USB2.0 VGA UVC WebCam: Found keys
[    23.233] (II) evdev: USB2.0 VGA UVC WebCam: Configuring as keyboard
[    23.233] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input9/event8"
[    23.233] (II) XINPUT: Adding extended input device "USB2.0 VGA UVC WebCam" (type: KEYBOARD, id 11)
[    23.233] (**) Option "xkb_rules" "evdev"
[    23.233] (**) Option "xkb_model" "pc105"
[    23.233] (**) Option "xkb_layout" "fr"
[    23.233] (**) Option "xkb_variant" "latin9"
[    23.234] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event14)
[    23.234] (II) No input driver specified, ignoring this device.
[    23.234] (II) This device may have been added with another device file.
[    23.234] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event7)
[    23.234] (**) Asus WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    23.234] (II) Using input driver '
evdev' for 'Asus WMI hotkeys'
[    23.234] (**) Asus WMI hotkeys: always reports core events
[    23.234] (**) evdev: Asus WMI hotkeys: Device: "/dev/input/event7"
[    23.234] (--) evdev: Asus WMI hotkeys: Vendor 0 Product 0
[    23.234] (--) evdev: Asus WMI hotkeys: Found keys
[    23.234] (II) evdev: Asus WMI hotkeys: Configuring as keyboard
[    23.234] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input8/event7"
[    23.234] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 12)
[    23.234] (**) Option "xkb_rules" "evdev"
[    23.234] (**) Option "xkb_model" "pc105"
[    23.234] (**) Option "xkb_layout" "fr"
[    23.234] (**) Option "xkb_variant" "latin9"
[    23.235] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    23.235] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    23.235] (II) Using input driver '
evdev' for 'AT Translated Set 2 keyboard'
[    23.235] (**) AT Translated Set 2 keyboard: always reports core events
[    23.235] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[    23.235] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    23.235] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    23.235] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    23.235] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    23.235] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[    23.235] (**) Option "xkb_rules" "evdev"
[    23.235] (**) Option "xkb_model" "pc105"
[    23.235] (**) Option "xkb_layout" "fr"
[    23.235] (**) Option "xkb_variant" "latin9"
[    23.236] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event2)
[    23.236] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[    23.236] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[    23.236] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[    23.236] (II) LoadModule: "synaptics"
[    23.236] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    23.341] (II) Module synaptics: vendor="X.Org Foundation"
[    23.341]  compiled for 1.16.0.901, module version = 1.8.99
[    23.341]  Module class: X.Org XInput Driver
[    23.341]  ABI class: X.Org XInput driver, version 21.0
[    23.341] (II) Using input driver '
synaptics' for 'ETPS/2 Elantech Touchpad'
[    23.341] (**) ETPS/2 Elantech Touchpad: always reports core events
[    23.341] (**) Option "Device" "/dev/input/event2"
[    23.468] (II) synaptics: ETPS/2 Elantech Touchpad: found clickpad property
[    23.468] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 3097 (res 31)
[    23.468] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 2119 (res 32)
[    23.468] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[    23.468] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[    23.468] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left double triple
[    23.468] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[    23.468] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[    23.468] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[    23.468] (**) ETPS/2 Elantech Touchpad: always reports core events
[    23.504] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input2/event2"
[    23.504] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 14)
[    23.504] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[    23.504] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
[    23.504] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.053
[    23.504] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[    23.504] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[    23.504] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[    23.504] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[    23.504] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[    23.504] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse1)
[    23.504] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[    23.504] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[    23.504] (II) No input driver specified, ignoring this device.
[    23.504] (II) This device may have been added with another device file.
[    42.451] (II) intel(0): EDID vendor "CMN", prod id 5572
[    42.451] (II) intel(0): Printing DDC gathered Modelines:
[    42.451] (II) intel(0): Modeline "1920x1080"x0.0  136.62  1920 1964 1992 2070  1080 1082 1086 1100 -hsync -vsync (66.0 kHz eP)
[    42.510] (II) intel(0): EDID vendor "CMN", prod id 5572
[    42.510] (II) intel(0): Printing DDC gathered Modelines:
[    42.510] (II) intel(0): Modeline "1920x1080"x0.0  136.62  1920 1964 1992 2070  1080 1082 1086 1100 -hsync -vsync (66.0 kHz eP)
[    42.641] (II) intel(0): EDID vendor "CMN", prod id 5572
[    42.641] (II) intel(0): Printing DDC gathered Modelines:
[    42.641] (II) intel(0): Modeline "1920x1080"x0.0  136.62  1920 1964 1992 2070  1080 1082 1086 1100 -hsync -vsync (66.0 kHz eP)
[    44.788] (II) intel(0): EDID vendor "CMN", prod id 5572
[    44.788] (II) intel(0): Printing DDC gathered Modelines:
[    44.788] (II) intel(0): Modeline "1920x1080"x0.0  136.62  1920 1964 1992 2070  1080 1082 1086 1100 -hsync -vsync (66.0 kHz eP)




------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Réponse à :

 apt-get install xinput



Téléchargement de xinput

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Réponse à :

 xinput --list-props "ETPS/2 Elantech Touchpad"



 
No protocol specified
Unable to connect to X server



Voila toutes les réponses aux commandes demandées !

Merci d'avance !


Utilisateur de Linux ! Vive Linux !
Mon ordi : Asus K501LX / Intel Core i5 5200U / Nvidia Geforce GTX 950M 2 Go / 8 Go DDR3L
Debian 9.4.0 Stretch
Raspberry Pi 3 B+ / Raspberry Pi Zero W

Hors ligne

#11 28-04-2018 21:30:42

èfpé
Membre
Inscription : 10-07-2016

Re : Problème Pad PC Portable [Résolu]

Re-,

OK ; merci pour ces retours donc... on remarque d'emblée que celui de xinput est parfaitement anormal :

xinput --list-props "ETPS/2 Elantech Touchpad"

unable to find device ETPS/2 Elantech Touchpad


Est un exemple de retour obtenu sur une machine non équipée de ce périphérique d'entrée, que donne :

xinput --list


Par ailleurs,

cat /var/log/Xorg.0.log

[    23.236] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event2)
[    23.236] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[    23.236] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[    23.236] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[    23.236] (II) LoadModule: "synaptics"
[    23.236] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    23.341] (II) Module synaptics: vendor="X.Org Foundation"
[    23.341]  compiled for 1.16.0.901, module version = 1.8.99
[    23.341]  Module class: X.Org XInput Driver
[    23.341]  ABI class: X.Org XInput driver, version 21.0
[    23.341] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[    23.341] (**) ETPS/2 Elantech Touchpad: always reports core events
[    23.341] (**) Option "Device" "/dev/input/event2"
[    23.468] (II) synaptics: ETPS/2 Elantech Touchpad: found clickpad property
[    23.468] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 3097 (res 31)
[    23.468] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 2119 (res 32)
[    23.468] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[    23.468] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[    23.468] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left double triple
[    23.468] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[    23.468] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[    23.468] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[    23.468] (**) ETPS/2 Elantech Touchpad: always reports core events
[    23.504] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input2/event2"
[    23.504] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 14)
[    23.504] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[    23.504] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
[    23.504] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.053
[    23.504] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[    23.504] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[    23.504] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[    23.504] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[    23.504] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[    23.504] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse1)
[    23.504] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
 


Montre que le pavé tactile est détecté, piloté et configuré (mais les deux dernières lignes sont à creuser).

Note : ton fichier /etc/apt/sources.list comporte certainement des doublons, mais c'est un tout autre sujet.

Hors ligne

#12 01-05-2018 10:09:17

Debion
Membre
Distrib. : Debian 9.4.0 Stretch
Noyau : Linux 4.9.0-6-amd64
(G)UI : Cinnamon 3.2.7
Inscription : 24-02-2018

Re : Problème Pad PC Portable [Résolu]

Problème résolu ! J'ai installé le dernier Debian 9.4.0 au lieu de Debian 8.10 . Maintenant mon Pad fonctionne. J'en ai profité pour re-partitionner mes disques !

Pour les doublons du fichier sources.list , je le savais mais j'avais pas pris le temps.

Merci beaucoup !

Dernière modification par Debion (01-05-2018 17:29:22)


Utilisateur de Linux ! Vive Linux !
Mon ordi : Asus K501LX / Intel Core i5 5200U / Nvidia Geforce GTX 950M 2 Go / 8 Go DDR3L
Debian 9.4.0 Stretch
Raspberry Pi 3 B+ / Raspberry Pi Zero W

Hors ligne

Pied de page des forums