Vous n'êtes pas identifié(e).
saque eud dun (patois chtimi : fonce dedans)
Hors ligne
Pour le terminal, sous XFCE, n'utilise pas le vieux xterm, mais si tu ne l'as pas, installe le terminal xfce.
Je pensais qu'il s'installait par défaut ....
tu m'a sauvé la vie
j'ai fait la modif
@smolski
pas d'autres remarques ?
bon désolé mais le driver amd minable , a mon avis il me manque quelque chose en opencl .
pour le jeux pas testé encore , sinon le bureau c est nikel .
je vai essayer de vous mettre quelques infos.
Commande:
Retour:
Commande:
Retour:
Commande:
Retour:
la carte devrait etre entre 60 et 65 degrés (le logiciel de calcul tourne ) 34 c est les vacances pour elle aussi
Commande:
Retour:
Dernière modification par anonyme (20-05-2015 17:26:45)
saque eud dun (patois chtimi : fonce dedans)
Hors ligne
Desktop 1: SKP P21. Gigabyte B550M DS3H. AMD Ryzen 9 3900 @ 3,1 Ghz. Kingston FURY 64 Gb DDR4-3200. Sapphire Radeon Pulse RX 6700 XT 12Gb.
Laptop: Acer Aspire E5-573G. Intel Core i3-4005U @ 1,7 Ghz. Intel Haswell-ULT Integrated Graphics
Desktop 2: HP Compaq 6000 Pro Intel Core2 Quad Q8400 @ 2,6 Ghz. 6Gb ddr3. Geforce GT 710
Hors ligne
je suis sur qu il lit meme pas le post le méchant , juste les boutons
Argh... anonyme ma déjouer !
Mouaaaaaaaaaaaaaah...
saque eud dun (patois chtimi : fonce dedans)
Hors ligne
@ anonyme: Pour le terminal XFCE pas de soucis, quand je peux donner un coup de main !
Pour le fglrx d'experimental: risqué, je ne sais pas, c'est pas parce que c'est dans ce dépôt à la réputation "sulfureuse" que c'est forcément buggé.
Je suis à peu près sur que des rolling de la famille ArchLinux utilisent des trucs encore plus récents que ce qu'il y a dans ces dépôts.
Un exemple: je viens d'aller voir ce qu'il y a la dedans, et j'ai vu qu'il y a pas mal d'éléments de KDE 5 (aka Kf5). C'est loin d'être sur Debian, mais
déjà pas mal de rolling-release l'utilise par défaut en tant qu'environnement KDE.
la version experimental n est pas dans sid et dans stretch (testing) il n y a meme plus le driver fglrx , comme j etais sous stretch j ai eu de gros problemes de dependences
donc je suis repassé en jessie pour test avec xfce ( 5 install depuis hier soir )
je vai etre obligé d attendre que ça passe en sid .
Amd doit sortir la serie 300 de ses cartes bientot .
je pense que pour cette année on est pas pret de voir du nouveau sur le "non free" d amd
deja c est bien j ai un bureau linux sur ma carte amd
ps: au modo je répond pas , il est méchant
Dernière modification par anonyme (20-05-2015 21:05:08)
saque eud dun (patois chtimi : fonce dedans)
Hors ligne
Dernière modification par yoshi (21-05-2015 10:06:14)
Desktop 1: SKP P21. Gigabyte B550M DS3H. AMD Ryzen 9 3900 @ 3,1 Ghz. Kingston FURY 64 Gb DDR4-3200. Sapphire Radeon Pulse RX 6700 XT 12Gb.
Laptop: Acer Aspire E5-573G. Intel Core i3-4005U @ 1,7 Ghz. Intel Haswell-ULT Integrated Graphics
Desktop 2: HP Compaq 6000 Pro Intel Core2 Quad Q8400 @ 2,6 Ghz. 6Gb ddr3. Geforce GT 710
Hors ligne
Ir0nsh007er (49 72 30 6E 73 68 30 30 37 65 72). Mon CV
Noob un jour, noob toujours
01001001 01110010 00110000 01101110 01110011 01101000 00110000 00110000 00110111 01100101 01110010
Hors ligne
retour:
et pour glx
commande:
retour:
la 3D (opencl et opengl ) est "OK" pas besoin du fglrx , juste que certaines applications on besoin du driver du constructeur.
meme avec le driver "experimental" je n ai pas reussi a faire fonctionner mon logiciel .
je pense a un probleme de selection soit "mesa" soit "opencl" du driver non libre (les 2 sont installé )
mais je suis sur que j 'ai un minimum de 3D rien qu avec du libre
ça vaudrai le coup de tester "steam" voir si ça fonctionne
commande
retour
commande
retour
commande
retour
commande
je suis en unstable et XFCE4 avec le noyau 4.xxx
@++
Dernière modification par anonyme (22-05-2015 13:58:40)
les conseils d installation du site debian
quelques liens :
http://support.amd.com/en-us/kb-article … Notes.aspx
https://packages.debian.org/jessie/fglrx-driver
https://packages.debian.org/stretch/fglrx-driver
https://packages.debian.org/stretch/fglrx-modules-dkms
le xorg.conf
d'autres liens :
https://wiki.debian.org/ATIProprietary/Configuration
celui ci est spécifique au calcul par gpu (l equivalent de cuda pour nvidia )
https://wiki.debian.org/fr/ATIStream
https://packages.debian.org/fr/sid/amd-opencl-icd
Dernière modification par anonyme (13-12-2015 07:53:59)
je suis sur le bureau avec la carte R9 270 affichage tres correct , stretch est a jour
Dernière modification par anonyme (13-12-2015 13:08:43)
retour commande
apres avoir repondu "o"
creation du xorg.conf (selon le tuto du wiki D_F )
le xorg.conf généré
redemarrage en esperant pouvoir revenir ici
Dernière modification par anonyme (13-12-2015 13:31:16)
retour commande
mise en place des librairie i386
retour commande (donne une erreur )
PS: le paquet "multiarch-support" est installé ainsi que le paquet "libgl1-fglrx-glx" (vérifié )
retour commande
Dernière modification par anonyme (13-12-2015 16:22:35)
Dernière modification par anonyme (13-12-2015 16:23:59)
cette information vient d'ou , j'ai des doutes
voila les tests selon le tuto
retour commande
retour commande
retour commande
retour commande
retour commande
retour commande
retour commande
retour commande
la temperature a monte un peu de 33 a 36
retour commande
commande effectué en root ce qui explique le message , la fenetre de l utilitaire ati c est ouverte (j ai l utilitaire directement dans mon menu Mate )
par le menu je crois que je ne peu pas accéder a la configuration de l ecran (demande privileges) par amdcccle en root je peu
Voila pour la partie test , toutes les commandes qui retourne une erreur c est pour Mesa (mesa-util)
pour le driver je pense que c est correct , pour mon application de calcul elle démarre mais bug
Dernière modification par anonyme (13-12-2015 15:54:30)
pour ce paquet il n existe plus a partir de jessie => https://packages.debian.org/wheezy/fglrx-glx-ia32
j ai installé le paquet " opencl-headers" (utile peut etre mais que pour le calcul)
ps: pour mon soucis , le driver est "amd app sdk" , j ai suivi les conseils du tuto debian , comme je veut pas utiliser le driver Ati , c'est pas gagné
pour la partie 3D (jeux etc .... ) pour moi c est correct.
si j étais courageux je testerai le bureau gnome
Dernière modification par anonyme (13-12-2015 17:17:50)
Hors ligne