[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.36-1+deb8u2 (2016-10-19)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.16.0-4-amd64 root=UUID=3dfdd143-a2a7-4617-b06f-312afd78c363 ro quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000789b3fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000789b4000-0x00000000789b4fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000789b5000-0x00000000789defff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000789df000-0x000000007bb75fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007bb76000-0x000000007c611fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007c612000-0x000000007c641fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007c642000-0x000000007cbcffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007cbd0000-0x000000007d2a3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007d2a4000-0x000000007d2fdfff] type 20
[ 0.000000] BIOS-e820: [mem 0x000000007d2fe000-0x000000007d2fefff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007d300000-0x000000007d3fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000037effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.40 by American Megatrends
[ 0.000000] efi: ACPI=0x7c61b000 ACPI 2.0=0x7c61b000 SMBIOS=0x7d1d8000
[ 0.000000] efi: mem00: type=7, attr=0xf, range=[0x0000000000000000-0x0000000000058000) (0MB)
[ 0.000000] efi: mem01: type=0, attr=0xf, range=[0x0000000000058000-0x0000000000059000) (0MB)
[ 0.000000] efi: mem02: type=7, attr=0xf, range=[0x0000000000059000-0x000000000009e000) (0MB)
[ 0.000000] efi: mem03: type=0, attr=0xf, range=[0x000000000009e000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem04: type=2, attr=0xf, range=[0x0000000000100000-0x0000000001018000) (15MB)
[ 0.000000] efi: mem05: type=7, attr=0xf, range=[0x0000000001018000-0x0000000001200000) (1MB)
[ 0.000000] efi: mem06: type=2, attr=0xf, range=[0x0000000001200000-0x0000000002118000) (15MB)
[ 0.000000] efi: mem07: type=7, attr=0xf, range=[0x0000000002118000-0x0000000036344000) (834MB)
[ 0.000000] efi: mem08: type=2, attr=0xf, range=[0x0000000036344000-0x000000003719a000) (14MB)
[ 0.000000] efi: mem09: type=7, attr=0xf, range=[0x000000003719a000-0x0000000052c15000) (442MB)
[ 0.000000] efi: mem10: type=2, attr=0xf, range=[0x0000000052c15000-0x0000000070a4a000) (478MB)
[ 0.000000] efi: mem11: type=4, attr=0xf, range=[0x0000000070a4a000-0x0000000070a8a000) (0MB)
[ 0.000000] efi: mem12: type=7, attr=0xf, range=[0x0000000070a8a000-0x0000000077793000) (109MB)
[ 0.000000] efi: mem13: type=1, attr=0xf, range=[0x0000000077793000-0x00000000777b1000) (0MB)
[ 0.000000] efi: mem14: type=4, attr=0xf, range=[0x00000000777b1000-0x00000000789b4000) (18MB)
[ 0.000000] efi: mem15: type=10, attr=0xf, range=[0x00000000789b4000-0x00000000789b5000) (0MB)
[ 0.000000] efi: mem16: type=6, attr=0x800000000000000f, range=[0x00000000789b5000-0x00000000789df000) (0MB)
[ 0.000000] efi: mem17: type=4, attr=0xf, range=[0x00000000789df000-0x0000000078a3a000) (0MB)
[ 0.000000] efi: mem18: type=7, attr=0xf, range=[0x0000000078a3a000-0x0000000079d31000) (18MB)
[ 0.000000] efi: mem19: type=4, attr=0xf, range=[0x0000000079d31000-0x000000007b576000) (24MB)
[ 0.000000] efi: mem20: type=7, attr=0xf, range=[0x000000007b576000-0x000000007b7e5000) (2MB)
[ 0.000000] efi: mem21: type=2, attr=0xf, range=[0x000000007b7e5000-0x000000007b7ef000) (0MB)
[ 0.000000] efi: mem22: type=3, attr=0xf, range=[0x000000007b7ef000-0x000000007bb76000) (3MB)
[ 0.000000] efi: mem23: type=0, attr=0xf, range=[0x000000007bb76000-0x000000007c612000) (10MB)
[ 0.000000] efi: mem24: type=9, attr=0xf, range=[0x000000007c612000-0x000000007c642000) (0MB)
[ 0.000000] efi: mem25: type=10, attr=0xf, range=[0x000000007c642000-0x000000007cbd0000) (5MB)
[ 0.000000] efi: mem26: type=6, attr=0x800000000000000f, range=[0x000000007cbd0000-0x000000007d2a4000) (6MB)
[ 0.000000] efi: mem27: type=5, attr=0x800000000000000f, range=[0x000000007d2a4000-0x000000007d2fe000) (0MB)
[ 0.000000] efi: mem28: type=4, attr=0xf, range=[0x000000007d2fe000-0x000000007d2ff000) (0MB)
[ 0.000000] efi: mem29: type=7, attr=0xf, range=[0x0000000100000000-0x000000037f000000) (10224MB)
[ 0.000000] efi: mem30: type=0, attr=0x0, range=[0x000000007d300000-0x000000007d400000) (1MB)
[ 0.000000] efi: mem31: type=11, attr=0x8000000000000001, range=[0x00000000e0000000-0x00000000f0000000) (256MB)
[ 0.000000] efi: mem32: type=11, attr=0x8000000000000001, range=[0x00000000fe000000-0x00000000fe011000) (0MB)
[ 0.000000] efi: mem33: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
[ 0.000000] efi: mem34: type=11, attr=0x8000000000000001, range=[0x00000000fee00000-0x00000000fee01000) (0MB)
[ 0.000000] efi: mem35: type=11, attr=0x8000000000000001, range=[0x00000000ff000000-0x0000000100000000) (16MB)
[ 0.000000] SMBIOS 3.0 present.
[ 0.000000] DMI: PEAQ PEAQ PNB P2015 - I5B1/MA50LS, BIOS MA50Lx_1.04.MN 04/13/2016
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x37f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0080000000 mask 7F80000000 uncachable
[ 0.000000] 1 base 007E000000 mask 7FFE000000 uncachable
[ 0.000000] 2 base 007D800000 mask 7FFF800000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0x7d2ff max_arch_pfn = 0x400000000
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01cf4000, 0x01cf4fff] PGTABLE
[ 0.000000] BRK [0x01cf5000, 0x01cf5fff] PGTABLE
[ 0.000000] BRK [0x01cf6000, 0x01cf6fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x37ee00000-0x37effffff]
[ 0.000000] [mem 0x37ee00000-0x37effffff] page 2M
[ 0.000000] BRK [0x01cf7000, 0x01cf7fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x37c000000-0x37edfffff]
[ 0.000000] [mem 0x37c000000-0x37edfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x300000000-0x37bffffff]
[ 0.000000] [mem 0x300000000-0x33fffffff] page 1G
[ 0.000000] [mem 0x340000000-0x37bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x789b3fff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x787fffff] page 2M
[ 0.000000] [mem 0x78800000-0x789b3fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x789df000-0x7bb75fff]
[ 0.000000] [mem 0x789df000-0x789fffff] page 4k
[ 0.000000] [mem 0x78a00000-0x7b9fffff] page 2M
[ 0.000000] [mem 0x7ba00000-0x7bb75fff] page 4k
[ 0.000000] BRK [0x01cf8000, 0x01cf8fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x7d2fe000-0x7d2fefff]
[ 0.000000] [mem 0x7d2fe000-0x7d2fefff] page 4k
[ 0.000000] BRK [0x01cf9000, 0x01cf9fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x2ffffffff]
[ 0.000000] [mem 0x100000000-0x2ffffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x36344000-0x37199fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000000007C61B000 000024 (v02 MEDION)
[ 0.000000] ACPI: XSDT 0x000000007C61B0A0 0000BC (v01 MEDION MEDIONAG 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x000000007C639218 00010C (v05 MEDION MEDIONAG 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x000000007C61B1E8 01E02C (v02 MEDION MEDIONAG 01072009 INTL 20120913)
[ 0.000000] ACPI: FACS 0x000000007CBCFF80 000040
[ 0.000000] ACPI: APIC 0x000000007C639328 000084 (v03 MEDION MEDIONAG 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x000000007C6393B0 000044 (v01 MEDION MEDIONAG 01072009 AMI 00010013)
[ 0.000000] ACPI: FIDT 0x000000007C6393F8 00009C (v01 MEDION MEDIONAG 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x000000007C639498 00003C (v01 MEDION MEDIONAG 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x000000007C6394D8 000038 (v01 MEDION MEDIONAG 01072009 AMI. 0005000B)
[ 0.000000] ACPI: DBGP 0x000000007C639510 000034 (v01 INTEL 00000000 MSFT 0000005F)
[ 0.000000] ACPI: DBG2 0x000000007C639548 000054 (v00 INTEL 00000000 MSFT 0000005F)
[ 0.000000] ACPI: MSDM 0x000000007C6395A0 000055 (v03 MEDION MEDIONAG 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x000000007C6395F8 005554 (v02 SaSsdt SaSsdt 00003000 INTL 20120913)
[ 0.000000] ACPI: UEFI 0x000000007C63EB50 000042 (v01 00000000 00000000)
[ 0.000000] ACPI: SSDT 0x000000007C63EB98 000E73 (v02 CpuRef CpuSsdt 00003000 INTL 20120913)
[ 0.000000] ACPI: BGRT 0x000000007C63FA10 000038 (v01 MEDION MEDIONAG 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x000000007C63FA48 000696 (v02 SgRef SgPch 00001000 INTL 20120913)
[ 0.000000] ACPI: DMAR 0x000000007C6400E0 0000A8 (v01 INTEL SKL 00000001 INTL 00000001)
[ 0.000000] ACPI: TPM2 0x000000007C640188 000034 (v03 Tpm2Tabl 00000001 AMI 00000000)
[ 0.000000] ACPI: SSDT 0x000000007C6401C0 001922 (v01 OptRef OptTabl 00001000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x000000007C641AE8 0000B1 (v01 Intel_ ADebTabl 00001000 INTL 20120913)
[ 0.000000] ACPI: ASF! 0x000000007C641BA0 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000037effffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x37effffff]
[ 0.000000] NODE_DATA [mem 0x37eff9000-0x37effdfff]
[ 0.000000] [ffffea0000000000-ffffea000c3fffff] PMD -> [ffff880372600000-ffff88037cdfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x37effffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x00057fff]
[ 0.000000] node 0: [mem 0x00059000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0x789b3fff]
[ 0.000000] node 0: [mem 0x789df000-0x7bb75fff]
[ 0.000000] node 0: [mem 0x7d2fe000-0x7d2fefff]
[ 0.000000] node 0: [mem 0x100000000-0x37effffff]
[ 0.000000] On node 0 totalpages: 3123944
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 22 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 6872 pages used for memmap
[ 0.000000] DMA32 zone: 502604 pages, LIFO batch:31
[ 0.000000] Normal zone: 35784 pages used for memmap
[ 0.000000] Normal zone: 2617344 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 136
[ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x789b4000-0x789b4fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x789b5000-0x789defff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7bb76000-0x7c611fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7c612000-0x7c641fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7c642000-0x7cbcffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7cbd0000-0x7d2a3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7d2a4000-0x7d2fdfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7d2ff000-0x7d2fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7d300000-0x7d3fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7d400000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0x7d400000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88037ec00000 s80960 r8192 d21440 u524288
[ 0.000000] pcpu-alloc: s80960 r8192 d21440 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3081210
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.16.0-4-amd64 root=UUID=3dfdd143-a2a7-4617-b06f-312afd78c363 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x1f, cntxt size 0x440
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 12183440K/12495776K available (5237K kernel code, 947K rwdata, 1836K rodata, 1204K init, 840K bss, 312336K reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:33024 nr_irqs:1024 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration failed
[ 0.000000] tsc: Unable to calibrate against PIT
[ 0.000000] tsc: using HPET reference calibration
[ 0.000000] tsc: Detected 2398.941 MHz processor
[ 0.000029] Calibrating delay loop (skipped), value calculated using timer frequency.. 4797.88 BogoMIPS (lpj=9595764)
[ 0.000031] pid_max: default: 32768 minimum: 301
[ 0.000038] ACPI: Core revision 20140424
[ 0.032278] ACPI: All ACPI Tables successfully acquired
[ 0.033031] Security Framework initialized
[ 0.033038] AppArmor: AppArmor disabled by boot time parameter
[ 0.033039] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.034005] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.037115] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.038452] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.038469] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.038699] Initializing cgroup subsys memory
[ 0.038703] Initializing cgroup subsys devices
[ 0.038709] Initializing cgroup subsys freezer
[ 0.038711] Initializing cgroup subsys net_cls
[ 0.038715] Initializing cgroup subsys blkio
[ 0.038718] Initializing cgroup subsys perf_event
[ 0.038720] Initializing cgroup subsys net_prio
[ 0.038749] CPU: Physical Processor ID: 0
[ 0.038750] CPU: Processor Core ID: 0
[ 0.038754] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.040576] mce: CPU supports 8 MCE banks
[ 0.040593] CPU0: Thermal monitoring enabled (TM1)
[ 0.040602] process: using mwait in idle threads
[ 0.040605] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
tlb_flushall_shift: 6
[ 0.040966] Freeing SMP alternatives memory: 20K (ffffffff81a1b000 - ffffffff81a20000)
[ 0.043576] ftrace: allocating 21697 entries in 85 pages
[ 0.052024] dmar: Host address width 39
[ 0.052026] dmar: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.052035] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e
[ 0.052037] dmar: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.052043] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[ 0.052044] dmar: RMRR base: 0x0000007c3b4000 end: 0x0000007c3d3fff
[ 0.052045] dmar: RMRR base: 0x0000007d800000 end: 0x0000007fffffff
[ 0.053249] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.053250] HPET id 0 under DRHD base 0xfed91000
[ 0.053251] Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.053390] Enabled IRQ remapping in x2apic mode
[ 0.053392] Enabling x2apic
[ 0.053393] Enabled x2apic
[ 0.053403] Switched APIC routing to cluster x2apic.
[ 0.057484] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.097182] smpboot: CPU0: Intel(R) Core(TM) i5-6200U CPU @ 2.30GHz (fam: 06, model: 4e, stepping: 03)
[ 0.097192] TSC deadline timer enabled
[ 0.097213] Performance Events: no PEBS fmt3+, generic architected perfmon, full-width counters, Intel PMU driver.
[ 0.097218] ... version: 4
[ 0.097219] ... bit width: 48
[ 0.097220] ... generic registers: 4
[ 0.097221] ... value mask: 0000ffffffffffff
[ 0.097222] ... max period: 0000ffffffffffff
[ 0.097222] ... fixed-purpose events: 3
[ 0.097223] ... event mask: 000000070000000f
[ 0.098694] x86: Booting SMP configuration:
[ 0.098696] .... node #0, CPUs: #1
[ 0.113570] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.113653] #2 #3
[ 0.143436] x86: Booted up 1 node, 4 CPUs
[ 0.143439] smpboot: Total of 4 processors activated (19191.52 BogoMIPS)
[ 0.147351] devtmpfs: initialized
[ 0.150338] PM: Registering ACPI NVS region [mem 0x789b4000-0x789b4fff] (4096 bytes)
[ 0.150340] PM: Registering ACPI NVS region [mem 0x7c642000-0x7cbcffff] (5824512 bytes)
[ 0.151179] pinctrl core: initialized pinctrl subsystem
[ 0.151245] NET: Registered protocol family 16
[ 0.151353] cpuidle: using governor ladder
[ 0.151356] cpuidle: using governor menu
[ 0.151400] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.151401] ACPI: bus type PCI registered
[ 0.151403] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.151489] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.151491] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.151739] PCI: Using configuration type 1 for base access
[ 0.163863] ACPI: Added _OSI(Module Device)
[ 0.163865] ACPI: Added _OSI(Processor Device)
[ 0.163866] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.163867] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.191724] ACPI: Executed 19 blocks of module-level executable AML code
[ 0.231627] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.255785] ACPI: Dynamic OEM Table Load:
[ 0.255791] ACPI: SSDT 0xFFFF8803710F8000 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20120913)
[ 0.256686] ACPI: Dynamic OEM Table Load:
[ 0.256691] ACPI: SSDT 0xFFFF8803710F2000 00061E (v02 PmRef Cpu0Ist 00003000 INTL 20120913)
[ 0.276189] ACPI: Dynamic OEM Table Load:
[ 0.276194] ACPI: SSDT 0xFFFF880371146800 0005AA (v02 PmRef ApIst 00003000 INTL 20120913)
[ 0.285963] ACPI: Dynamic OEM Table Load:
[ 0.285968] ACPI: SSDT 0xFFFF8803710A6800 000119 (v02 PmRef ApCst 00003000 INTL 20120913)
[ 0.355878] ACPI: Interpreter enabled
[ 0.355886] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
[ 0.355894] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[ 0.355914] ACPI: (supports S0 S3 S4 S5)
[ 0.355915] ACPI: Using IOAPIC for interrupt routing
[ 0.355951] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.357833] ACPI: Power Resource [PG00] (on)
[ 0.358150] ACPI: Power Resource [PG01] (on)
[ 0.358451] ACPI: Power Resource [PG02] (on)
[ 0.359714] ACPI: Power Resource [WRST] (on)
[ 0.359973] ACPI: Power Resource [WRST] (on)
[ 0.360227] ACPI: Power Resource [WRST] (on)
[ 0.360480] ACPI: Power Resource [WRST] (on)
[ 0.360732] ACPI: Power Resource [WRST] (on)
[ 0.360780] ACPI: Power Resource [PC09] (on)
[ 0.380551] ACPI: Power Resource [WRST] (on)
[ 0.380803] ACPI: Power Resource [WRST] (on)
[ 0.381057] ACPI: Power Resource [WRST] (on)
[ 0.381310] ACPI: Power Resource [WRST] (on)
[ 0.381564] ACPI: Power Resource [WRST] (on)
[ 0.381816] ACPI: Power Resource [WRST] (on)
[ 0.382069] ACPI: Power Resource [WRST] (on)
[ 0.382323] ACPI: Power Resource [WRST] (on)
[ 0.382575] ACPI: Power Resource [WRST] (on)
[ 0.382828] ACPI: Power Resource [WRST] (on)
[ 0.383080] ACPI: Power Resource [WRST] (on)
[ 0.383333] ACPI: Power Resource [WRST] (on)
[ 0.383587] ACPI: Power Resource [WRST] (on)
[ 0.383839] ACPI: Power Resource [WRST] (on)
[ 0.390468] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.390474] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.390506] \_SB_.PCI0:_OSC invalid UUID
[ 0.390507] _OSC request data:1 1f 0
[ 0.390510] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.391195] PCI host bridge to bus 0000:00
[ 0.391197] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.391199] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.391200] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.391202] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.391203] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[ 0.391204] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[ 0.391206] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[ 0.391207] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
[ 0.391208] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.391209] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.391211] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.391212] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.391213] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 0.391214] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 0.391215] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
[ 0.391217] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
[ 0.391218] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
[ 0.391219] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff]
[ 0.391220] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff]
[ 0.391229] pci 0000:00:00.0: [8086:1904] type 00 class 0x060000
[ 0.391510] pci 0000:00:02.0: [8086:1916] type 00 class 0x030000
[ 0.391520] pci 0000:00:02.0: reg 0x10: [mem 0xdd000000-0xddffffff 64bit]
[ 0.391528] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[ 0.391532] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.391676] pci 0000:00:08.0: [8086:1911] type 00 class 0x088000
[ 0.391690] pci 0000:00:08.0: reg 0x10: [mem 0xdf42f000-0xdf42ffff 64bit]
[ 0.391855] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
[ 0.391876] pci 0000:00:14.0: reg 0x10: [mem 0xdf410000-0xdf41ffff 64bit]
[ 0.391945] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.392025] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.392068] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
[ 0.392088] pci 0000:00:14.2: reg 0x10: [mem 0xdf42e000-0xdf42efff 64bit]
[ 0.392264] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
[ 0.392288] pci 0000:00:16.0: reg 0x10: [mem 0xdf42d000-0xdf42dfff 64bit]
[ 0.392365] pci 0000:00:16.0: PME# supported from D3hot
[ 0.392489] pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601
[ 0.392507] pci 0000:00:17.0: reg 0x10: [mem 0xdf428000-0xdf429fff]
[ 0.392516] pci 0000:00:17.0: reg 0x14: [mem 0xdf42c000-0xdf42c0ff]
[ 0.392524] pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097]
[ 0.392531] pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083]
[ 0.392539] pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f]
[ 0.392547] pci 0000:00:17.0: reg 0x24: [mem 0xdf42b000-0xdf42b7ff]
[ 0.392592] pci 0000:00:17.0: PME# supported from D3hot
[ 0.392704] pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400
[ 0.392769] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.392840] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.392883] pci 0000:00:1c.4: [8086:9d14] type 01 class 0x060400
[ 0.392956] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.393028] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.393071] pci 0000:00:1d.0: [8086:9d1a] type 01 class 0x060400
[ 0.393135] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.393206] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.393245] pci 0000:00:1d.3: [8086:9d1b] type 01 class 0x060400
[ 0.393309] pci 0000:00:1d.3: PME# supported from D0 D3hot D3cold
[ 0.393379] pci 0000:00:1d.3: System wakeup disabled by ACPI
[ 0.393430] pci 0000:00:1f.0: [8086:9d48] type 00 class 0x060100
[ 0.393621] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
[ 0.393631] pci 0000:00:1f.2: reg 0x10: [mem 0xdf424000-0xdf427fff]
[ 0.393767] pci 0000:00:1f.3: [8086:9d70] type 00 class 0x040300
[ 0.393791] pci 0000:00:1f.3: reg 0x10: [mem 0xdf420000-0xdf423fff 64bit]
[ 0.393817] pci 0000:00:1f.3: reg 0x20: [mem 0xdf400000-0xdf40ffff 64bit]
[ 0.393867] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.393945] pci 0000:00:1f.3: System wakeup disabled by ACPI
[ 0.393985] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
[ 0.394031] pci 0000:00:1f.4: reg 0x10: [mem 0xdf42a000-0xdf42a0ff 64bit]
[ 0.394101] pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f]
[ 0.394339] pci 0000:01:00.0: [10de:134d] type 00 class 0x030200
[ 0.394365] pci 0000:01:00.0: reg 0x10: [mem 0xde000000-0xdeffffff]
[ 0.394388] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.394411] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[ 0.394427] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.394442] pci 0000:01:00.0: reg 0x30: [mem 0xdf000000-0xdf07ffff pref]
[ 0.394592] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 0.399918] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.399921] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
[ 0.399924] pci 0000:00:1c.0: bridge window [mem 0xde000000-0xdf0fffff]
[ 0.399929] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.400068] pci 0000:02:00.0: [1b21:1242] type 00 class 0x0c0330
[ 0.400092] pci 0000:02:00.0: reg 0x10: [mem 0xdf300000-0xdf307fff 64bit]
[ 0.400215] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.400251] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.407970] pci 0000:00:1c.4: PCI bridge to [bus 02]
[ 0.407974] pci 0000:00:1c.4: bridge window [mem 0xdf300000-0xdf3fffff]
[ 0.408088] pci 0000:03:00.0: [8086:3165] type 00 class 0x028000
[ 0.408129] pci 0000:03:00.0: reg 0x10: [mem 0xdf200000-0xdf201fff 64bit]
[ 0.408308] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.408371] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.415958] pci 0000:00:1d.0: PCI bridge to [bus 03]
[ 0.415963] pci 0000:00:1d.0: bridge window [mem 0xdf200000-0xdf2fffff]
[ 0.416063] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
[ 0.416086] pci 0000:04:00.0: reg 0x10: [io 0xd000-0xd0ff]
[ 0.416118] pci 0000:04:00.0: reg 0x18: [mem 0xdf100000-0xdf100fff 64bit]
[ 0.416140] pci 0000:04:00.0: reg 0x20: [mem 0xd2100000-0xd2103fff 64bit pref]
[ 0.416241] pci 0000:04:00.0: supports D1 D2
[ 0.416242] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.416294] pci 0000:04:00.0: System wakeup disabled by ACPI
[ 0.423973] pci 0000:00:1d.3: PCI bridge to [bus 04]
[ 0.423975] pci 0000:00:1d.3: bridge window [io 0xd000-0xdfff]
[ 0.423978] pci 0000:00:1d.3: bridge window [mem 0xdf100000-0xdf1fffff]
[ 0.423983] pci 0000:00:1d.3: bridge window [mem 0xd2100000-0xd21fffff 64bit pref]
[ 0.424001] pci 0000:01:00.0: Max Payload Size 128, but upstream 0000:00:1c.0 set to 256; if necessary, use "pci=pcie_bus_safe" and report a bug
[ 0.425350] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.425400] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.425448] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.425495] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.425541] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.425587] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.425634] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.425680] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.425993] ACPI: Enabled 4 GPEs in block 00 to 7F
[ 0.426091] ACPI : EC: GPE = 0x51, I/O: command/status = 0x66, data = 0x62
[ 0.426197] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.426199] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.426202] vgaarb: loaded
[ 0.426203] vgaarb: bridge control possible 0000:00:02.0
[ 0.426293] PCI: Using ACPI for IRQ routing
[ 0.454207] PCI: pci_cache_line_size set to 64 bytes
[ 0.454292] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.454293] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.454295] e820: reserve RAM buffer [mem 0x789b4000-0x7bffffff]
[ 0.454296] e820: reserve RAM buffer [mem 0x7bb76000-0x7bffffff]
[ 0.454297] e820: reserve RAM buffer [mem 0x7d2ff000-0x7fffffff]
[ 0.454299] e820: reserve RAM buffer [mem 0x37f000000-0x37fffffff]
[ 0.454452] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.454457] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 0.456503] Switched to clocksource hpet
[ 0.461090] pnp: PnP ACPI init
[ 0.461100] ACPI: bus type PNP registered
[ 0.461288] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.461291] system 00:00: [io 0xffff] has been reserved
[ 0.461293] system 00:00: [io 0xffff] has been reserved
[ 0.461294] system 00:00: [io 0xffff] has been reserved
[ 0.461296] system 00:00: [io 0x1800-0x18fe] could not be reserved
[ 0.461298] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.461300] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.461393] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.461431] system 00:02: [io 0x1854-0x1857] has been reserved
[ 0.461433] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.461667] system 00:03: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.461669] system 00:03: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.461671] system 00:03: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.461672] system 00:03: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.461674] system 00:03: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.461676] system 00:03: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.461678] system 00:03: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.461679] system 00:03: [mem 0xff000000-0xffffffff] has been reserved
[ 0.461681] system 00:03: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.461683] system 00:03: [mem 0xdffe0000-0xdfffffff] has been reserved
[ 0.461684] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.461727] system 00:04: [mem 0xfd000000-0xfdabffff] has been reserved
[ 0.461729] system 00:04: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 0.461730] system 00:04: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 0.461732] system 00:04: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 0.461734] system 00:04: [mem 0xfe036000-0xfe03bfff] has been reserved
[ 0.461735] system 00:04: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 0.461737] system 00:04: [mem 0xfe410000-0xfe7fffff] has been reserved
[ 0.461739] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.461979] system 00:05: [io 0xff00-0xfffe] has been reserved
[ 0.461981] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.462953] system 00:06: [mem 0xfe029000-0xfe029fff] has been reserved
[ 0.462955] system 00:06: [mem 0xfe028000-0xfe028fff] has been reserved
[ 0.462956] system 00:06: [mem 0xfdaf0000-0xfdafffff] has been reserved
[ 0.462958] system 00:06: [mem 0xfdae0000-0xfdaeffff] has been reserved
[ 0.462959] system 00:06: [mem 0xfdac0000-0xfdacffff] has been reserved
[ 0.462961] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.463440] pnp 00:07: Plug and Play ACPI device, IDs SYN0e11 SYN0e00 SYN0002 PNP0f13 (active)
[ 0.463478] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.463693] pnp: PnP ACPI: found 9 devices
[ 0.463694] ACPI: bus type PNP unregistered
[ 0.472066] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.472069] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
[ 0.472073] pci 0000:00:1c.0: bridge window [mem 0xde000000-0xdf0fffff]
[ 0.472076] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.472080] pci 0000:00:1c.4: PCI bridge to [bus 02]
[ 0.472084] pci 0000:00:1c.4: bridge window [mem 0xdf300000-0xdf3fffff]
[ 0.472090] pci 0000:00:1d.0: PCI bridge to [bus 03]
[ 0.472093] pci 0000:00:1d.0: bridge window [mem 0xdf200000-0xdf2fffff]
[ 0.472099] pci 0000:00:1d.3: PCI bridge to [bus 04]
[ 0.472101] pci 0000:00:1d.3: bridge window [io 0xd000-0xdfff]
[ 0.472104] pci 0000:00:1d.3: bridge window [mem 0xdf100000-0xdf1fffff]
[ 0.472107] pci 0000:00:1d.3: bridge window [mem 0xd2100000-0xd21fffff 64bit pref]
[ 0.472112] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.472114] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.472115] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.472117] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.472118] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.472119] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.472121] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
[ 0.472122] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
[ 0.472123] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
[ 0.472124] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
[ 0.472126] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
[ 0.472127] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
[ 0.472128] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
[ 0.472130] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
[ 0.472131] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
[ 0.472132] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff]
[ 0.472133] pci_bus 0000:00: resource 20 [mem 0x80000000-0xdfffffff]
[ 0.472135] pci_bus 0000:00: resource 21 [mem 0xfd000000-0xfe7fffff]
[ 0.472136] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.472137] pci_bus 0000:01: resource 1 [mem 0xde000000-0xdf0fffff]
[ 0.472139] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.472140] pci_bus 0000:02: resource 1 [mem 0xdf300000-0xdf3fffff]
[ 0.472141] pci_bus 0000:03: resource 1 [mem 0xdf200000-0xdf2fffff]
[ 0.472143] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
[ 0.472144] pci_bus 0000:04: resource 1 [mem 0xdf100000-0xdf1fffff]
[ 0.472145] pci_bus 0000:04: resource 2 [mem 0xd2100000-0xd21fffff 64bit pref]
[ 0.472322] NET: Registered protocol family 2
[ 0.472733] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.472934] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.473057] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.473069] TCP: reno registered
[ 0.473084] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.473128] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.473253] NET: Registered protocol family 1
[ 0.473271] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.473720] PCI: CLS 0 bytes, default 64
[ 0.473759] Unpacking initramfs...
[ 0.745656] Freeing initrd memory: 14680K (ffff880036344000 - ffff88003719a000)
[ 0.745835] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.745837] software IO TLB [mem 0x737b1000-0x777b1000] (64MB) mapped at [ffff8800737b1000-ffff8800777b0fff]
[ 0.746092] microcode: CPU0 sig=0x406e3, pf=0x80, revision=0x88
[ 0.746101] microcode: CPU1 sig=0x406e3, pf=0x80, revision=0x88
[ 0.746112] microcode: CPU2 sig=0x406e3, pf=0x80, revision=0x88
[ 0.746122] microcode: CPU3 sig=0x406e3, pf=0x80, revision=0x88
[ 0.746194] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.746252] simple-framebuffer simple-framebuffer.0: framebuffer at 0xb0000000, 0x1d5000 bytes, mapped to 0xffffc90011c00000
[ 0.746254] simple-framebuffer simple-framebuffer.0: format=a8r8g8b8, mode=800x600x32, linelength=3200
[ 0.747326] Console: switching to colour frame buffer device 100x37
[ 0.748290] simple-framebuffer simple-framebuffer.0: fb0: simplefb registered!
[ 0.748572] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.748615] audit: initializing netlink subsys (disabled)
[ 0.748629] audit: type=2000 audit(1486918074.756:1): initialized
[ 0.749060] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.749079] zbud: loaded
[ 0.749474] VFS: Disk quotas dquot_6.5.2
[ 0.749500] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.749558] msgmni has been set to 23917
[ 0.750260] alg: No test for stdrng (krng)
[ 0.750315] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.750428] io scheduler noop registered
[ 0.750431] io scheduler deadline registered
[ 0.750505] io scheduler cfq registered (default)
[ 0.751044] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.751058] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.751078] intel_idle: does not run on family 6 model 78
[ 0.751115] GHES: HEST is not enabled!
[ 0.751210] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.751841] Linux agpgart interface v0.103
[ 0.751945] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.761363] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.761366] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.761551] mousedev: PS/2 mouse device common for all mice
[ 0.762052] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.762142] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.762155] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.762758] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[ 0.762759] AMD IOMMUv2 functionality not available on this system
[ 0.762834] TCP: cubic registered
[ 0.763026] NET: Registered protocol family 10
[ 0.763334] mip6: Mobile IPv6
[ 0.763338] NET: Registered protocol family 17
[ 0.763350] mpls_gso: MPLS GSO support
[ 0.763768] registered taskstats version 1
[ 0.765206] rtc_cmos 00:01: setting system clock to 2017-02-12 16:47:55 UTC (1486918075)
[ 0.765279] PM: Hibernation image not present or could not be loaded.
[ 0.765964] Freeing unused kernel memory: 1204K (ffffffff818ee000 - ffffffff81a1b000)
[ 0.765965] Write protecting the kernel read-only data: 8192k
[ 0.766305] Freeing unused kernel memory: 896K (ffff880001720000 - ffff880001800000)
[ 0.766678] Freeing unused kernel memory: 212K (ffff8800019cb000 - ffff880001a00000)
[ 0.771626] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.775184] systemd-udevd[71]: starting version 215
[ 0.775395] random: systemd-udevd urandom read with 67 bits of entropy available
[ 0.796174] [Firmware Bug]: No valid trip found
[ 0.797798] SCSI subsystem initialized
[ 0.797977] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.797986] r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 0.798477] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.798480] ACPI: Thermal Zone [TZ01] (18 C)
[ 0.801778] ACPI: bus type USB registered
[ 0.801811] usbcore: registered new interface driver usbfs
[ 0.801825] usbcore: registered new interface driver hub
[ 0.801989] libata version 3.00 loaded.
[ 0.802718] ahci 0000:00:17.0: version 3.0
[ 0.802929] ahci 0000:00:17.0: irq 138 for MSI/MSI-X
[ 0.803285] usbcore: registered new device driver usb
[ 0.805342] r8169 0000:04:00.0: irq 139 for MSI/MSI-X
[ 0.805597] r8169 0000:04:00.0 eth0: RTL8168g/8111g at 0xffffc900018d6000, b8:ae:ed:09:f1:14, XID 0c000880 IRQ 139
[ 0.805600] r8169 0000:04:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 0.816910] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 3 ports 6 Gbps 0x7 impl SATA mode
[ 0.816913] ahci 0000:00:17.0: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
[ 0.817469] scsi0 : ahci
[ 0.817853] scsi1 : ahci
[ 0.818136] scsi2 : ahci
[ 0.818177] ata1: SATA max UDMA/133 abar m2048@0xdf42b000 port 0xdf42b100 irq 138
[ 0.818179] ata2: SATA max UDMA/133 abar m2048@0xdf42b000 port 0xdf42b180 irq 138
[ 0.818183] ata3: SATA max UDMA/133 abar m2048@0xdf42b000 port 0xdf42b200 irq 138
[ 0.818408] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.818415] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 0.819501] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.819521] xhci_hcd 0000:00:14.0: irq 140 for MSI/MSI-X
[ 0.819764] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.819766] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.819768] usb usb1: Product: xHCI Host Controller
[ 0.819769] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
[ 0.819771] usb usb1: SerialNumber: 0000:00:14.0
[ 0.819993] hub 1-0:1.0: USB hub found
[ 0.820051] hub 1-0:1.0: 12 ports detected
[ 0.825780] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.825783] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.825816] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.825817] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.825819] usb usb2: Product: xHCI Host Controller
[ 0.825820] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
[ 0.825821] usb usb2: SerialNumber: 0000:00:14.0
[ 0.825953] hub 2-0:1.0: USB hub found
[ 0.825974] hub 2-0:1.0: 6 ports detected
[ 0.828899] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 0.828903] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3
[ 0.887851] xhci_hcd 0000:02:00.0: irq 141 for MSI/MSI-X
[ 0.887856] xhci_hcd 0000:02:00.0: irq 142 for MSI/MSI-X
[ 0.887860] xhci_hcd 0000:02:00.0: irq 143 for MSI/MSI-X
[ 0.887864] xhci_hcd 0000:02:00.0: irq 144 for MSI/MSI-X
[ 0.887868] xhci_hcd 0000:02:00.0: irq 145 for MSI/MSI-X
[ 0.887975] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.887976] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.887977] usb usb3: Product: xHCI Host Controller
[ 0.887979] usb usb3: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
[ 0.887980] usb usb3: SerialNumber: 0000:02:00.0
[ 0.888116] hub 3-0:1.0: USB hub found
[ 0.888125] hub 3-0:1.0: 2 ports detected
[ 0.888201] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 0.888204] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 4
[ 0.888229] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.888243] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.888244] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.888245] usb usb4: Product: xHCI Host Controller
[ 0.888246] usb usb4: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
[ 0.888247] usb usb4: SerialNumber: 0000:02:00.0
[ 0.888376] hub 4-0:1.0: USB hub found
[ 0.888386] hub 4-0:1.0: 2 ports detected
[ 1.082582] random: nonblocking pool is initialized
[ 1.137156] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.137181] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.137341] ata3.00: ATA-10: SSD PHISON 128GB PS3109-S9, S9FM02.6, max UDMA/133
[ 1.137343] ata3.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.137523] ata3.00: configured for UDMA/133
[ 1.139034] ata2.00: ATAPI: HL-DT-ST DVDRAM GUD0N, 1.00, max UDMA/133
[ 1.141137] ata2.00: configured for UDMA/133
[ 1.193141] usb 1-3: new high-speed USB device number 2 using xhci_hcd
[ 1.193146] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.199558] ata1.00: ATA-8: ST1500LM006 HN-M151RAD, 2BE10001, max UDMA/133
[ 1.199559] ata1.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.205991] ata1.00: configured for UDMA/133
[ 1.206149] scsi 0:0:0:0: Direct-Access ATA ST1500LM006 HN-M 0001 PQ: 0 ANSI: 5
[ 1.207439] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GUD0N 1.00 PQ: 0 ANSI: 5
[ 1.213893] scsi 2:0:0:0: Direct-Access ATA SSD PHISON 128GB 02.6 PQ: 0 ANSI: 5
[ 1.216421] sd 0:0:0:0: [sda] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 1.216424] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.216653] sd 0:0:0:0: [sda] Write Protect is off
[ 1.216655] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.216734] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.222638] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.222640] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.222762] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.222914] sd 2:0:0:0: [sdb] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[ 1.223062] sd 2:0:0:0: [sdb] Write Protect is off
[ 1.223065] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.223184] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.223337] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.223459] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.223521] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 1.225322] sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7
[ 1.226181] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 1.430873] usb 1-3: New USB device found, idVendor=05c8, idProduct=039c
[ 1.430876] usb 1-3: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 1.430878] usb 1-3: Product: Webcam HD
[ 1.430879] usb 1-3: Manufacturer: Foxlink
[ 1.430880] usb 1-3: SerialNumber: 200901010001
[ 1.463727] sda: sda1 sda2 sda3 sda4
[ 1.464329] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.601468] usb 1-5: new full-speed USB device number 3 using xhci_hcd
[ 1.693954] psmouse serio1: synaptics: queried max coordinates: x [..5662], y [..4634]
[ 1.736369] psmouse serio1: synaptics: queried min coordinates: x [1344..], y [1298..]
[ 1.745609] tsc: Refined TSC clocksource calibration: 2399.989 MHz
[ 1.786583] usb 1-5: New USB device found, idVendor=8087, idProduct=0a2a
[ 1.786586] usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.804361] PM: Starting manual resume from disk
[ 1.804365] PM: Hibernation image partition 8:3 present
[ 1.804366] PM: Looking for hibernation image.
[ 1.804493] PM: Image not found (code -22)
[ 1.804495] PM: Hibernation image not present or could not be loaded.
[ 1.821010] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xf00323/0x840300/0x12e800, board id: 3002, fw id: 1770968
[ 1.835757] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
[ 1.875146] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
[ 1.876513] EXT4-fs (sdb4): mounted filesystem with ordered data mode. Opts: (null)
[ 1.926081] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[ 1.926195] systemd[1]: Detected architecture 'x86-64'.
[ 1.936416] systemd[1]: Inserted module 'autofs4'
[ 1.936638] systemd[1]: Set hostname to <Nomade>.
[ 1.953766] usb 1-7: new high-speed USB device number 4 using xhci_hcd
[ 1.986460] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 1.986513] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 1.986529] systemd[1]: Starting Remote File Systems (Pre).
[ 1.986555] systemd[1]: Reached target Remote File Systems (Pre).
[ 1.986570] systemd[1]: Starting Encrypted Volumes.
[ 1.986584] systemd[1]: Reached target Encrypted Volumes.
[ 1.986599] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 1.986625] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 1.986646] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 1.986772] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 1.986788] systemd[1]: Expecting device dev-disk-by\x2duuid-9021a078\x2d71f2\x2d4cca\x2dafa5\x2de271d3175c9b.device...
[ 1.986802] systemd[1]: Expecting device dev-disk-by\x2duuid-5F0B\x2d1C79.device...
[ 1.986816] systemd[1]: Expecting device dev-disk-by\x2duuid-69d86105\x2da6db\x2d41c9\x2d92d0\x2df9de124131f3.device...
[ 1.986829] systemd[1]: Expecting device dev-disk-by\x2duuid-82fa2cfe\x2d6882\x2d4ff5\x2da457\x2db20067da1b86.device...
[ 1.986843] systemd[1]: Expecting device dev-disk-by\x2duuid-2a842f4f\x2dfe05\x2d4142\x2da852\x2dc88f7026dda9.device...
[ 1.986856] systemd[1]: Expecting device dev-disk-by\x2duuid-21e99aa1\x2dfaa1\x2d4fc8\x2d9956\x2d0498d3f3f8f0.device...
[ 1.986869] systemd[1]: Expecting device dev-disk-by\x2duuid-ee01be27\x2dea80\x2d42d3\x2d8ab7\x2df55728b33f33.device...
[ 1.986883] systemd[1]: Expecting device dev-disk-by\x2duuid-eb3390cf\x2db99b\x2d4ebc\x2da35f\x2d4a1844491fee.device...
[ 1.986896] systemd[1]: Expecting device dev-disk-by\x2duuid-8f05e91e\x2db7b8\x2d4ced\x2db7c5\x2dfc407b517fb0.device...
[ 1.986909] systemd[1]: Expecting device dev-disk-by\x2duuid-c4dac92c\x2defb7\x2d4a63\x2db6c3\x2d95d007dfd595.device...
[ 1.986922] systemd[1]: Starting Root Slice.
[ 1.986945] systemd[1]: Created slice Root Slice.
[ 1.986958] systemd[1]: Starting User and Session Slice.
[ 1.986991] systemd[1]: Created slice User and Session Slice.
[ 1.987005] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 1.987034] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 1.987048] systemd[1]: Starting Delayed Shutdown Socket.
[ 1.987070] systemd[1]: Listening on Delayed Shutdown Socket.
[ 1.987083] systemd[1]: Starting Journal Socket (/dev/log).
[ 1.987108] systemd[1]: Listening on Journal Socket (/dev/log).
[ 1.987122] systemd[1]: Starting udev Control Socket.
[ 1.987142] systemd[1]: Listening on udev Control Socket.
[ 1.987156] systemd[1]: Starting udev Kernel Socket.
[ 1.987176] systemd[1]: Listening on udev Kernel Socket.
[ 1.987191] systemd[1]: Starting Journal Socket.
[ 1.987216] systemd[1]: Listening on Journal Socket.
[ 1.987243] systemd[1]: Starting System Slice.
[ 1.987273] systemd[1]: Created slice System Slice.
[ 1.987290] systemd[1]: Started File System Check on Root Device.
[ 1.987304] systemd[1]: Starting system-systemd\x2dfsck.slice.
[ 1.987340] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 1.987355] systemd[1]: Starting system-getty.slice.
[ 1.987388] systemd[1]: Created slice system-getty.slice.
[ 1.987409] systemd[1]: Starting Increase datagram queue length...
[ 1.987714] systemd[1]: Mounting POSIX Message Queue File System...
[ 1.988881] systemd[1]: Started Set Up Additional Binary Formats.
[ 1.988955] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 1.989280] systemd[1]: Starting udev Coldplug all Devices...
[ 1.989668] systemd[1]: Mounting Debug File System...
[ 1.994230] systemd[1]: Starting Load Kernel Modules...
[ 1.994590] systemd[1]: Mounting Huge Pages File System...
[ 1.994882] systemd[1]: Starting Slices.
[ 1.994902] systemd[1]: Reached target Slices.
[ 1.995764] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 1.996069] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 2.001336] fuse init (API version 7.23)
[ 2.002386] systemd[1]: Started Load Kernel Modules.
[ 2.002529] systemd[1]: Mounting FUSE Control File System...
[ 2.002898] systemd[1]: Starting Apply Kernel Variables...
[ 2.003305] systemd[1]: Mounted Configuration File System.
[ 2.005451] systemd[1]: Mounted Huge Pages File System.
[ 2.005494] systemd[1]: Mounted Debug File System.
[ 2.005529] systemd[1]: Mounted POSIX Message Queue File System.
[ 2.005572] systemd[1]: Mounted FUSE Control File System.
[ 2.006007] systemd[1]: Started Increase datagram queue length.
[ 2.006750] systemd[1]: Started Apply Kernel Variables.
[ 2.007524] systemd[1]: Starting Syslog Socket.
[ 2.007574] systemd[1]: Listening on Syslog Socket.
[ 2.007617] systemd[1]: Starting Journal Service...
[ 2.007994] systemd[1]: Started Journal Service.
[ 2.021894] systemd-udevd[202]: starting version 215
[ 2.086267] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[ 2.086274] ACPI: Sleep Button [SLPB]
[ 2.086330] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[ 2.086333] ACPI: Power Button [PWRB]
[ 2.086398] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input5
[ 2.087098] ACPI: Lid Switch [LID0]
[ 2.087159] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 2.087163] ACPI: Power Button [PWRF]
[ 2.087522] Monitor-Mwait will be used to enter C-1 state
[ 2.087554] Monitor-Mwait will be used to enter C-2 state
[ 2.087578] Monitor-Mwait will be used to enter C-3 state
[ 2.087615] ACPI: acpi_idle registered with cpuidle
[ 2.098312] wmi: Mapper loaded
[ 2.099054] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 2.102364] ACPI: AC Adapter [ADP1] (off-line)
[ 2.102748] input: cmpc_keys as /devices/LNXSYSTM:00/LNXSYBUS:00/FNBT0000:00/input/input7
[ 2.104771] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro
[ 2.108043] EXT4-fs (sdb4): re-mounted. Opts: (null)
[ 2.130061] EFI Variables Facility v0.08 2004-May-17
[ 2.130710] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 2.138209] usb 1-7: New USB device found, idVendor=0bda, idProduct=0129
[ 2.138212] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.138214] usb 1-7: Product: USB2.0-CRW
[ 2.138216] usb 1-7: Manufacturer: Generic
[ 2.138217] usb 1-7: SerialNumber: 20100201396000000
[ 2.139741] [drm] Initialized drm 1.1.0 20060810
[ 2.140366] pstore: Registered efi as persistent store backend
[ 2.146633] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[ 2.146970] snd_hda_intel 0000:00:1f.3: irq 146 for MSI/MSI-X
[ 2.161794] MXM: GUID detected in BIOS
[ 2.161826] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[ 2.162024] ACPI Warning: \_SB_.PCI0.RP01.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[ 2.162088] ACPI Warning: \_SB_.PCI0.RP01.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[ 2.162304] pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
[ 2.162306] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.RP01.PEGP handle
[ 2.162322] checking generic (b0000000 1d5000) vs hw (c0000000 10000000)
[ 2.162323] checking generic (b0000000 1d5000) vs hw (d0000000 2000000)
[ 2.162363] nouveau 0000:01:00.0: enabling device (0006 -> 0007)
[ 2.162726] nouveau ![ DEVICE][0000:01:00.0] unknown Maxwell chipset
[ 2.162749] nouveau E[ DEVICE][0000:01:00.0] unknown chipset, 0x1180d0a2
[ 2.162771] nouveau E[ DRM] failed to create 0x80000080, -22
[ 2.163016] nouveau: probe of 0000:01:00.0 failed with error -22
[ 2.164931] Bluetooth: Core ver 2.19
[ 2.164945] NET: Registered protocol family 31
[ 2.164946] Bluetooth: HCI device and connection manager initialized
[ 2.164951] Bluetooth: HCI socket layer initialized
[ 2.164954] Bluetooth: L2CAP socket layer initialized
[ 2.164961] Bluetooth: SCO socket layer initialized
[ 2.168558] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 2.168561] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 2.168563] sound hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 2.168564] sound hdaudioC0D0: mono: mono_out=0x0
[ 2.168565] sound hdaudioC0D0: inputs:
[ 2.168567] sound hdaudioC0D0: Mic=0x18
[ 2.168568] sound hdaudioC0D0: Internal Mic=0x12
[ 2.171895] AVX2 version of gcm_enc/dec engaged.
[ 2.179730] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 2.183376] media: Linux media interface: v0.10
[ 2.186459] Linux video capture interface: v2.00
[ 2.192861] uvcvideo: Found UVC 1.00 device Webcam HD (05c8:039c)
[ 2.192981] alg: No test for crc32 (crc32-pclmul)
[ 2.199512] input: Webcam HD as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/input/input9
[ 2.200079] usbcore: registered new interface driver uvcvideo
[ 2.200082] USB Video Class driver (1.1.1)
[ 2.202386] usbcore: registered new interface driver btusb
[ 2.206709] asus_wmi: Asus Management GUID not found
[ 2.217727] Bluetooth: hci0: read Intel version: 370810011003110e00
[ 2.218284] bluetooth hci0: firmware: failed to load intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq (-2)
[ 2.218335] bluetooth hci0: Direct firmware load failed with error -2
[ 2.218336] bluetooth hci0: Falling back to user helper
[ 2.223498] Bluetooth: hci0 failed to open Intel firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq(-12)
[ 2.223572] bluetooth hci0: firmware: failed to load intel/ibt-hw-37.8.bseq (-2)
[ 2.223609] bluetooth hci0: Direct firmware load failed with error -2
[ 2.223610] bluetooth hci0: Falling back to user helper
[ 2.224039] Bluetooth: hci0 failed to open default Intel fw file: intel/ibt-hw-37.8.bseq
[ 2.238233] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
[ 2.248057] FAT-fs (sdb1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 2.256339] EXT4-fs (sdb7): mounted filesystem with ordered data mode. Opts: (null)
[ 2.259888] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[ 2.262254] EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: (null)
[ 2.310135] ACPI: Battery Slot [BAT1] (battery present)
[ 2.459399] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 2.566388] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 2.641306] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 2.642647] Adding 24414204k swap on /dev/sda3. Priority:-1 extents:1 across:24414204k FS
[ 2.650396] systemd-journald[196]: Received request to flush runtime journal from PID 1
[ 2.746631] Switched to clocksource tsc
[ 2.765167] RPC: Registered named UNIX socket transport module.
[ 2.765170] RPC: Registered udp transport module.
[ 2.765172] RPC: Registered tcp transport module.
[ 2.765173] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 2.767716] FS-Cache: Loaded
[ 2.773421] FS-Cache: Netfs 'nfs' registered for caching
[ 2.779738] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 2.952635] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 2.952639] Bluetooth: BNEP filters: protocol multicast
[ 2.952645] Bluetooth: BNEP socket layer initialized
[ 2.970692] cfg80211: Calling CRDA to update world regulatory domain
[ 2.996894] cfg80211: World regulatory domain updated:
[ 2.996896] cfg80211: DFS Master region: unset
[ 2.996897] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 2.996899] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 2.996900] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 2.996901] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 2.996902] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 2.996904] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 2.996905] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 2.996906] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 2.996907] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 3.028950] r8169 0000:04:00.0: firmware: direct-loading firmware rtl_nic/rtl8168g-2.fw
[ 3.068684] r8169 0000:04:00.0 eth0: link down
[ 3.068741] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3.192381] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1f.3/sound/card0/hdaudioC0D0/input10
[ 3.194048] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
[ 3.194174] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[ 3.194294] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[ 3.246586] usbcore: registered new interface driver rtsx_usb
[ 146.089682] usb 1-2: new low-speed USB device number 5 using xhci_hcd
[ 146.279078] usb 1-2: New USB device found, idVendor=0461, idProduct=4d0f
[ 146.279091] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 146.279098] usb 1-2: Product: USB Optical Mouse
[ 146.279104] usb 1-2: Manufacturer: PixArt
[ 146.279678] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 146.297079] hidraw: raw HID events driver (C) Jiri Kosina
[ 146.300859] usbcore: registered new interface driver usbhid
[ 146.300862] usbhid: USB HID core driver
[ 146.306724] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:0461:4D0F.0001/input/input14
[ 146.306878] hid-generic 0003:0461:4D0F.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:14.0-2/input0
[ 341.070626] r8169 0000:04:00.0 eth0: link up
[ 341.070634] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 341.792327] r8169 0000:04:00.0 eth0: link down
[ 343.467772] r8169 0000:04:00.0 eth0: link up
[ 3.038]
X.Org X Server 1.16.4
Release Date: 2014-12-20
[ 3.038] X Protocol Version 11, Revision 0
[ 3.038] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[ 3.038] Current Operating System: Linux Nomade 3.16.0-4-amd64 #1 SMP Debian 3.16.36-1+deb8u2 (2016-10-19) x86_64
[ 3.038] Kernel command line: BOOT_IMAGE=/vmlinuz-3.16.0-4-amd64 root=UUID=3dfdd143-a2a7-4617-b06f-312afd78c363 ro quiet
[ 3.038] Build Date: 11 February 2015 12:32:02AM
[ 3.038] xorg-server 2:1.16.4-1 ([url]http://www.debian.org/support[/url])
[ 3.038] Current version of pixman: 0.32.6
[ 3.038] Before reporting problems, check [url]http://wiki.x.org[/url]
to make sure that you have the latest version.
[ 3.038] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 3.038] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Feb 12 17:47:57 2017
[ 3.041] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 3.041] (==) No Layout section. Using the first Screen section.
[ 3.041] (==) No screen section available. Using defaults.
[ 3.041] (**) |-->Screen "Default Screen Section" (0)
[ 3.041] (**) | |-->Monitor "<default monitor>"
[ 3.042] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 3.042] (==) Automatically adding devices
[ 3.042] (==) Automatically enabling devices
[ 3.042] (==) Automatically adding GPU devices
[ 3.044] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 3.044] Entry deleted from font path.
[ 3.047] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 3.047] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 3.047] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 3.047] (II) Loader magic: 0x7f20f3e5ad80
[ 3.047] (II) Module ABI versions:
[ 3.047] X.Org ANSI C Emulation: 0.4
[ 3.047] X.Org Video Driver: 18.0
[ 3.047] X.Org XInput driver : 21.0
[ 3.047] X.Org Server Extension : 8.0
[ 3.048] (--) PCI:*(0:0:2:0) 8086:1916:1019:9833 rev 7, Mem @ 0xdd000000/16777216, 0xb0000000/268435456, I/O @ 0x0000f000/64
[ 3.048] (--) PCI: (0:1:0:0) 10de:134d:1019:9833 rev 162, Mem @ 0xde000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 3.049] (II) LoadModule: "glx"
[ 3.065] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 3.073] (II) Module glx: vendor="X.Org Foundation"
[ 3.073] compiled for 1.16.4, module version = 1.0.0
[ 3.073] ABI class: X.Org Server Extension, version 8.0
[ 3.073] (==) AIGLX enabled
[ 3.073] (==) Matched intel as autoconfigured driver 0
[ 3.073] (==) Matched modesetting as autoconfigured driver 1
[ 3.073] (==) Matched fbdev as autoconfigured driver 2
[ 3.073] (==) Matched vesa as autoconfigured driver 3
[ 3.073] (==) Assigned the driver to the xf86ConfigLayout
[ 3.073] (II) LoadModule: "intel"
[ 3.073] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 3.076] (II) Module intel: vendor="X.Org Foundation"
[ 3.076] compiled for 1.15.99.904, module version = 2.21.15
[ 3.076] Module class: X.Org Video Driver
[ 3.076] ABI class: X.Org Video Driver, version 18.0
[ 3.076] (II) LoadModule: "modesetting"
[ 3.076] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 3.077] (II) Module modesetting: vendor="X.Org Foundation"
[ 3.077] compiled for 1.16.4, module version = 0.9.0
[ 3.077] Module class: X.Org Video Driver
[ 3.077] ABI class: X.Org Video Driver, version 18.0
[ 3.077] (II) LoadModule: "fbdev"
[ 3.077] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 3.077] (II) Module fbdev: vendor="X.Org Foundation"
[ 3.077] compiled for 1.15.99.904, module version = 0.4.4
[ 3.077] Module class: X.Org Video Driver
[ 3.077] ABI class: X.Org Video Driver, version 18.0
[ 3.077] (II) LoadModule: "vesa"
[ 3.077] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 3.078] (II) Module vesa: vendor="X.Org Foundation"
[ 3.078] compiled for 1.15.99.904, module version = 2.3.3
[ 3.078] Module class: X.Org Video Driver
[ 3.078] ABI class: X.Org Video Driver, version 18.0
[ 3.078] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
[ 3.079] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 3.079] (II) FBDEV: driver for framebuffer: fbdev
[ 3.079] (II) VESA: driver for VESA chipsets: vesa
[ 3.079] (++) using VT number 7
[ 3.093] (EE) open /dev/dri/card0: No such file or directory
[ 3.093] (WW) Falling back to old probe method for modesetting
[ 3.093] (EE) open /dev/dri/card0: No such file or directory
[ 3.093] (II) Loading sub module "fbdevhw"
[ 3.093] (II) LoadModule: "fbdevhw"
[ 3.094] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 3.094] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 3.094] compiled for 1.16.4, module version = 0.0.2
[ 3.094] ABI class: X.Org Video Driver, version 18.0
[ 3.094] (**) FBDEV(1): claimed PCI slot 0@0:2:0
[ 3.094] (II) FBDEV(1): using default device
[ 3.094] (WW) Falling back to old probe method for vesa
[ 3.094] (EE) Screen 0 deleted because of no matching config section.
[ 3.094] (II) UnloadModule: "modesetting"
[ 3.094] (II) FBDEV(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 3.094] (==) FBDEV(0): Depth 24, (==) framebuffer bpp 32
[ 3.094] (==) FBDEV(0): RGB weight 888
[ 3.094] (==) FBDEV(0): Default visual is TrueColor
[ 3.094] (==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0)
[ 3.094] (II) FBDEV(0): hardware: simple (video memory: 1876kB)
[ 3.094] (II) FBDEV(0): checking modes against framebuffer device...
[ 3.094] (II) FBDEV(0): checking modes against monitor...
[ 3.094] (--) FBDEV(0): Virtual size is 800x600 (pitch 800)
[ 3.094] (**) FBDEV(0): Built-in mode "current"
[ 3.094] (==) FBDEV(0): DPI set to (96, 96)
[ 3.094] (II) Loading sub module "fb"
[ 3.094] (II) LoadModule: "fb"
[ 3.095] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 3.095] (II) Module fb: vendor="X.Org Foundation"
[ 3.095] compiled for 1.16.4, module version = 1.0.0
[ 3.095] ABI class: X.Org ANSI C Emulation, version 0.4
[ 3.095] (**) FBDEV(0): using shadow framebuffer
[ 3.095] (II) Loading sub module "shadow"
[ 3.095] (II) LoadModule: "shadow"
[ 3.096] (II) Loading /usr/lib/xorg/modules/libshadow.so
[ 3.096] (II) Module shadow: vendor="X.Org Foundation"
[ 3.096] compiled for 1.16.4, module version = 1.1.0
[ 3.096] ABI class: X.Org ANSI C Emulation, version 0.4
[ 3.096] (II) UnloadModule: "vesa"
[ 3.096] (II) Unloading vesa
[ 3.096] (==) Depth 24 pixmap format is 32 bpp
[ 3.096] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 3.099] (==) FBDEV(0): Backing store enabled
[ 3.099] (==) FBDEV(0): DPMS enabled
[ 3.099] (==) RandR enabled
[ 3.103] (II) SELinux: Disabled on system
[ 3.104] (II) AIGLX: Screen 0 is not DRI2 capable
[ 3.104] (EE) AIGLX: reverting to software rendering
[ 3.184] (II) AIGLX: Loaded and initialized swrast
[ 3.184] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 3.240] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 3.240] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 3.240] (II) LoadModule: "evdev"
[ 3.240] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 3.242] (II) Module evdev: vendor="X.Org Foundation"
[ 3.242] compiled for 1.16.0, module version = 2.9.0
[ 3.242] Module class: X.Org XInput Driver
[ 3.242] ABI class: X.Org XInput driver, version 21.0
[ 3.242] (II) Using input driver 'evdev' for 'Power Button'
[ 3.242] (**) Power Button: always reports core events
[ 3.242] (**) evdev: Power Button: Device: "/dev/input/event5"
[ 3.242] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 3.242] (--) evdev: Power Button: Found keys
[ 3.242] (II) evdev: Power Button: Configuring as keyboard
[ 3.242] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event5"
[ 3.242] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 3.242] (**) Option "xkb_rules" "evdev"
[ 3.242] (**) Option "xkb_model" "pc105"
[ 3.242] (**) Option "xkb_layout" "be"
[ 3.254] (II) config/udev: Adding input device cmpc_keys (/dev/input/event6)
[ 3.254] (**) cmpc_keys: Applying InputClass "evdev keyboard catchall"
[ 3.254] (II) Using input driver 'evdev' for 'cmpc_keys'
[ 3.254] (**) cmpc_keys: always reports core events
[ 3.254] (**) evdev: cmpc_keys: Device: "/dev/input/event6"
[ 3.254] (--) evdev: cmpc_keys: Vendor 0 Product 0
[ 3.254] (--) evdev: cmpc_keys: Found keys
[ 3.254] (II) evdev: cmpc_keys: Configuring as keyboard
[ 3.254] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/FNBT0000:00/input/input7/event6"
[ 3.254] (II) XINPUT: Adding extended input device "cmpc_keys" (type: KEYBOARD, id 7)
[ 3.254] (**) Option "xkb_rules" "evdev"
[ 3.254] (**) Option "xkb_model" "pc105"
[ 3.255] (**) Option "xkb_layout" "be"
[ 3.255] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 3.255] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 3.255] (II) Using input driver 'evdev' for 'Power Button'
[ 3.255] (**) Power Button: always reports core events
[ 3.255] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 3.255] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 3.255] (--) evdev: Power Button: Found keys
[ 3.255] (II) evdev: Power Button: Configuring as keyboard
[ 3.255] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4/event3"
[ 3.255] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 3.255] (**) Option "xkb_rules" "evdev"
[ 3.255] (**) Option "xkb_model" "pc105"
[ 3.255] (**) Option "xkb_layout" "be"
[ 3.255] (II) config/udev: Adding input device Lid Switch (/dev/input/event4)
[ 3.255] (II) No input driver specified, ignoring this device.
[ 3.255] (II) This device may have been added with another device file.
[ 3.256] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 3.256] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 3.256] (II) Using input driver 'evdev' for 'Sleep Button'
[ 3.256] (**) Sleep Button: always reports core events
[ 3.256] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[ 3.256] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 3.256] (--) evdev: Sleep Button: Found keys
[ 3.256] (II) evdev: Sleep Button: Configuring as keyboard
[ 3.256] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3/event2"
[ 3.256] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 3.256] (**) Option "xkb_rules" "evdev"
[ 3.256] (**) Option "xkb_model" "pc105"
[ 3.256] (**) Option "xkb_layout" "be"
[ 3.257] (II) config/udev: Adding input device Webcam HD (/dev/input/event8)
[ 3.257] (**) Webcam HD: Applying InputClass "evdev keyboard catchall"
[ 3.257] (II) Using input driver 'evdev' for 'Webcam HD'
[ 3.257] (**) Webcam HD: always reports core events
[ 3.257] (**) evdev: Webcam HD: Device: "/dev/input/event8"
[ 3.257] (--) evdev: Webcam HD: Vendor 0x5c8 Product 0x39c
[ 3.257] (--) evdev: Webcam HD: Found keys
[ 3.257] (II) evdev: Webcam HD: Configuring as keyboard
[ 3.257] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/input/input9/event8"
[ 3.257] (II) XINPUT: Adding extended input device "Webcam HD" (type: KEYBOARD, id 10)
[ 3.257] (**) Option "xkb_rules" "evdev"
[ 3.257] (**) Option "xkb_model" "pc105"
[ 3.257] (**) Option "xkb_layout" "be"
[ 3.258] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9)
[ 3.258] (II) No input driver specified, ignoring this device.
[ 3.258] (II) This device may have been added with another device file.
[ 3.259] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event10)
[ 3.259] (II) No input driver specified, ignoring this device.
[ 3.259] (II) This device may have been added with another device file.
[ 3.259] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event11)
[ 3.259] (II) No input driver specified, ignoring this device.
[ 3.259] (II) This device may have been added with another device file.
[ 3.260] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event12)
[ 3.260] (II) No input driver specified, ignoring this device.
[ 3.260] (II) This device may have been added with another device file.
[ 3.260] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 3.260] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 3.260] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 3.260] (**) AT Translated Set 2 keyboard: always reports core events
[ 3.260] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 3.260] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 3.260] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 3.260] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 3.260] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 3.260] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[ 3.260] (**) Option "xkb_rules" "evdev"
[ 3.260] (**) Option "xkb_model" "pc105"
[ 3.260] (**) Option "xkb_layout" "be"
[ 3.261] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event1)
[ 3.262] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 3.262] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 3.262] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 3.262] (II) LoadModule: "synaptics"
[ 3.262] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 3.263] (II) Module synaptics: vendor="X.Org Foundation"
[ 3.263] compiled for 1.16.0.901, module version = 1.8.99
[ 3.263] Module class: X.Org XInput Driver
[ 3.263] ABI class: X.Org XInput driver, version 21.0
[ 3.263] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 3.263] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 3.263] (**) Option "Device" "/dev/input/event1"
[ 3.296] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property
[ 3.296] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1344 - 5662 (res 42)
[ 3.296] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1298 - 4634 (res 53)
[ 3.296] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 3.296] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 3.296] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple
[ 3.296] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 3.296] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 3.296] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 3.296] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 3.348] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input2/event1"
[ 3.348] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[ 3.348] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 3.348] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 3.348] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.037
[ 3.349] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 3.349] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 3.349] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 3.349] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 3.349] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 3.349] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 3.349] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 3.350] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[ 3.350] (II) No input driver specified, ignoring this device.
[ 3.350] (II) This device may have been added with another device file.
[ 3.355] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 3.356] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9)
[ 3.356] (II) No input driver specified, ignoring this device.
[ 3.356] (II) This device may have been added with another device file.
[ 3.357] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event12)
[ 3.357] (II) No input driver specified, ignoring this device.
[ 3.357] (II) This device may have been added with another device file.
[ 3.357] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event11)
[ 3.357] (II) No input driver specified, ignoring this device.
[ 3.357] (II) This device may have been added with another device file.
[ 3.358] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event10)
[ 3.358] (II) No input driver specified, ignoring this device.
[ 3.358] (II) This device may have been added with another device file.
[ 5.461] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 111.062] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 146.209] (II) config/udev: Adding input device PixArt USB Optical Mouse (/dev/input/mouse1)
[ 146.209] (II) No input driver specified, ignoring this device.
[ 146.209] (II) This device may have been added with another device file.
[ 146.210] (II) config/udev: Adding input device PixArt USB Optical Mouse (/dev/input/event13)
[ 146.210] (**) PixArt USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 146.210] (II) Using input driver 'evdev' for 'PixArt USB Optical Mouse'
[ 146.210] (**) PixArt USB Optical Mouse: always reports core events
[ 146.210] (**) evdev: PixArt USB Optical Mouse: Device: "/dev/input/event13"
[ 146.210] (--) evdev: PixArt USB Optical Mouse: Vendor 0x461 Product 0x4d0f
[ 146.210] (--) evdev: PixArt USB Optical Mouse: Found 3 mouse buttons
[ 146.210] (--) evdev: PixArt USB Optical Mouse: Found scroll wheel(s)
[ 146.210] (--) evdev: PixArt USB Optical Mouse: Found relative axes
[ 146.210] (--) evdev: PixArt USB Optical Mouse: Found x and y relative axes
[ 146.210] (II) evdev: PixArt USB Optical Mouse: Configuring as mouse
[ 146.210] (II) evdev: PixArt USB Optical Mouse: Adding scrollwheel support
[ 146.210] (**) evdev: PixArt USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 146.210] (**) evdev: PixArt USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 146.210] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:0461:4D0F.0001/input/input14/event13"
[ 146.210] (II) XINPUT: Adding extended input device "PixArt USB Optical Mouse" (type: MOUSE, id 13)
[ 146.210] (II) evdev: PixArt USB Optical Mouse: initialized for relative axes.
[ 146.210] (**) PixArt USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 146.210] (**) PixArt USB Optical Mouse: (accel) acceleration profile 0
[ 146.210] (**) PixArt USB Optical Mouse: (accel) acceleration factor: 2.000
[ 146.210] (**) PixArt USB Optical Mouse: (accel) acceleration threshold: 4
[ 2196.426] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 2200.222] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 2284.191] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 2680.272] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 2734.529] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 2826.799] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 2860.151] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 2868.799] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 2890.725] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 2929.096] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 2967.781] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 2985.689] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 2990.394] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 3006.902] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 3035.093] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 3051.817] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 3083.884] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 3104.836] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 3115.964] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 3134.918] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 3175.421] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 3180.876] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 3186.134] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 3211.792] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 3310.455] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 3356.435] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 3368.262] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 3378.757] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 3383.368] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 3390.772] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 3602.771] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 3612.583] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 3617.327] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 3667.377] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 3690.219] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 3713.860] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 3732.020] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 3793.972] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 4209.718] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 4218.198] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 4245.223] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 4286.396] (EE) FBDEV(0): FBIOBLANK: Invalid argument