[ 0.000000] Using PowerMac machine description
[ 0.000000] Total memory = 1280MB; using 4096kB for hash table (at cfc00000)
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-powerpc (Debian 2.6.32-35) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 Tue Jun 14 09:33:14 UTC 2011
[ 0.000000] Found initrd at 0xc1b00000:0xc24a3000
[ 0.000000] Found UniNorth memory controller & host bridge @ 0xf8000000 revision: 0xd2
[ 0.000000] Mapped at 0xff7c0000
[ 0.000000] Found a Intrepid mac-io controller, rev: 0, mapped at 0xff740000
[ 0.000000] Processor NAP mode on idle enabled.
[ 0.000000] PowerMac motherboard: iBook G4
[ 0.000000] via-pmu: Server Mode is disabled
[ 0.000000] PMU driver v2 initialized for Core99, firmware: 0c
[ 0.000000] bootconsole [udbg0] enabled
[ 0.000000] Found UniNorth PCI host bridge at 0x00000000f0000000. Firmware bus number: 0->0
[ 0.000000] PCI host bridge /pci@f0000000 ranges:
[ 0.000000] MEM 0x00000000f1000000..0x00000000f1ffffff -> 0x00000000f1000000
[ 0.000000] IO 0x00000000f0000000..0x00000000f07fffff -> 0x0000000000000000
[ 0.000000] MEM 0x0000000090000000..0x000000009fffffff -> 0x0000000090000000
[ 0.000000] Found UniNorth PCI host bridge at 0x00000000f2000000. Firmware bus number: 0->0
[ 0.000000] PCI host bridge /pci@f2000000 (primary) ranges:
[ 0.000000] MEM 0x00000000f3000000..0x00000000f3ffffff -> 0x00000000f3000000
[ 0.000000] IO 0x00000000f2000000..0x00000000f27fffff -> 0x0000000000000000
[ 0.000000] MEM 0x0000000080000000..0x000000008fffffff -> 0x0000000080000000
[ 0.000000] Found UniNorth PCI host bridge at 0x00000000f4000000. Firmware bus number: 0->0
[ 0.000000] PCI host bridge /pci@f4000000 ranges:
[ 0.000000] MEM 0x00000000f5000000..0x00000000f5ffffff -> 0x00000000f5000000
[ 0.000000] IO 0x00000000f4000000..0x00000000f47fffff -> 0x0000000000000000
[ 0.000000] nvram: Checking bank 0...
[ 0.000000] nvram: gen0=980, gen1=981
[ 0.000000] nvram: Active bank is: 1
[ 0.000000] nvram: OF partition at 0x410
[ 0.000000] nvram: XP partition at 0x1020
[ 0.000000] nvram: NR partition at 0x1120
[ 0.000000] Top of RAM: 0x50000000, Total RAM: 0x50000000
[ 0.000000] Memory hole size: 0MB
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00030000
[ 0.000000] Normal 0x00030000 -> 0x00030000
[ 0.000000] HighMem 0x00030000 -> 0x00050000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00050000
[ 0.000000] On node 0 totalpages: 327680
[ 0.000000] free_area_init_node: node 0, pgdat c0505328, node_mem_map c059b000
[ 0.000000] DMA zone: 1536 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 195072 pages, LIFO batch:31
[ 0.000000] HighMem zone: 1024 pages used for memmap
[ 0.000000] HighMem zone: 130048 pages, LIFO batch:31
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 325120
[ 0.000000] Kernel command line: root=UUID=f26e9ca7-f938-4b28-a0c3-400bf8fb4156 ro
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] High memory: 524288k
[ 0.000000] Memory: 1278468k/1310720k available (4928k kernel code, 31088k reserved, 280k data, 478k bss, 232k init)
[ 0.000000] Kernel virtual memory layout:
[ 0.000000] * 0xfffef000..0xfffff000 : fixmap
[ 0.000000] * 0xff800000..0xffc00000 : highmem PTEs
[ 0.000000] * 0xfde72000..0xff800000 : early ioremap
[ 0.000000] * 0xf1000000..0xfde72000 : vmalloc & ioremap
[ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:512
[ 0.000000] mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 4 CPUs
[ 0.000000] mpic: ISU size: 64, shift: 6, mask: 3f
[ 0.000000] mpic: Initializing for 64 sources
[ 0.000000] irq: irq 55 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 55
[ 0.000000] GMT Delta read from XPRAM: 0 minutes, DST: off
[ 0.000000] time_init: decrementer frequency = 18.432000 MHz
[ 0.000000] time_init: processor frequency = 1199.999997 MHz
[ 0.000000] clocksource: timebase mult[d9038e4] shift[22] registered
[ 0.000000] clockevent: decrementer mult[4b7f5a5] shift[32] cpu[0]
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled, bootconsole disabled
[ 0.000000] irq: irq 22 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 22
[ 0.000000] irq: irq 23 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 23
[ 0.001424] Security Framework initialized
[ 0.001461] SELinux: Disabled at boot.
[ 0.001486] Mount-cache hash table entries: 512
[ 0.001978] device-tree: Duplicate name in /cpus/PowerPC,G4@0, renamed to "l2-cache#1"
[ 0.005895] Initializing cgroup subsys ns
[ 0.005918] Initializing cgroup subsys cpuacct
[ 0.005934] Initializing cgroup subsys devices
[ 0.005949] Initializing cgroup subsys freezer
[ 0.005964] Initializing cgroup subsys net_cls
[ 0.006901] devtmpfs: initialized
[ 0.007913] regulator: core version 0.5
[ 0.008110] NET: Registered protocol family 16
[ 0.008874] MPC7450 family performance monitor hardware support registered
[ 0.008951] irq: irq 42 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 42
[ 0.009003] KeyWest i2c @0xf8001003 irq 42 /uni-n@f8000000/i2c@f8001000
[ 0.009025] channel 0 bus <multibus>
[ 0.009037] channel 1 bus <multibus>
[ 0.009087] irq: irq 26 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 26
[ 0.009117] KeyWest i2c @0x80018000 irq 26 /pci@f2000000/mac-io@17/i2c@18000
[ 0.009136] channel 0 bus <multibus>
[ 0.009167] PMU i2c /pci@f2000000/mac-io@17/via-pmu@16000/pmu-i2c
[ 0.009184] channel 1 bus <multibus>
[ 0.009196] channel 2 bus <multibus>
[ 0.009297] irq: irq 25 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 25
[ 0.009340] irq: irq 47 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 47
[ 0.009991] PCI: Probing PCI hardware
[ 0.010225] pci 0000:00:10.0: reg 10 32bit mmio pref: [0x98000000-0x9fffffff]
[ 0.010241] pci 0000:00:10.0: reg 14 io port: [0x400-0x4ff]
[ 0.010255] pci 0000:00:10.0: reg 18 32bit mmio: [0x90000000-0x9000ffff]
[ 0.010280] pci 0000:00:10.0: reg 30 32bit mmio pref: [0x90020000-0x9003ffff]
[ 0.010314] pci 0000:00:10.0: supports D1 D2
[ 0.010390] irq: irq 48 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 48
[ 0.010750] pci 0001:10:12.0: reg 10 32bit mmio: [0x80084000-0x80085fff]
[ 0.010803] pci 0001:10:12.0: supports D1 D2
[ 0.010813] pci 0001:10:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.010847] pci 0001:10:12.0: PME# disabled
[ 0.010903] pci 0001:10:17.0: reg 10 32bit mmio: [0x80000000-0x8007ffff]
[ 0.010974] pci 0001:10:18.0: reg 10 32bit mmio: [0x000000-0x000fff]
[ 0.011049] pci 0001:10:19.0: reg 10 32bit mmio: [0x000000-0x000fff]
[ 0.011133] pci 0001:10:1a.0: reg 10 32bit mmio: [0x80083000-0x80083fff]
[ 0.011216] pci 0001:10:1b.0: reg 10 32bit mmio: [0x80082000-0x80082fff]
[ 0.011269] pci 0001:10:1b.0: supports D1 D2
[ 0.011278] pci 0001:10:1b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.011303] pci 0001:10:1b.0: PME# disabled
[ 0.011365] pci 0001:10:1b.1: reg 10 32bit mmio: [0x80081000-0x80081fff]
[ 0.011417] pci 0001:10:1b.1: supports D1 D2
[ 0.011426] pci 0001:10:1b.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.011451] pci 0001:10:1b.1: PME# disabled
[ 0.011512] pci 0001:10:1b.2: reg 10 32bit mmio: [0x80080000-0x800800ff]
[ 0.011565] pci 0001:10:1b.2: supports D1 D2
[ 0.011573] pci 0001:10:1b.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.011598] pci 0001:10:1b.2: PME# disabled
[ 0.011681] irq: irq 52 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 52
[ 0.011726] irq: irq 27 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 27
[ 0.011767] irq: irq 28 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 28
[ 0.011807] irq: irq 29 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 29
[ 0.011844] irq: irq 63 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 63
[ 0.012733] pci 0002:20:0d.0: reg 10 32bit mmio: [0xf5004000-0xf5007fff]
[ 0.012804] pci 0002:20:0e.0: reg 10 32bit mmio: [0xf5000000-0xf5000fff]
[ 0.012850] pci 0002:20:0e.0: supports D1 D2
[ 0.012859] pci 0002:20:0e.0: PME# supported from D0 D1 D2 D3hot
[ 0.012887] pci 0002:20:0e.0: PME# disabled
[ 0.012933] pci 0002:20:0f.0: reg 10 32bit mmio: [0xf5200000-0xf53fffff]
[ 0.012964] pci 0002:20:0f.0: reg 30 32bit mmio pref: [0xf5100000-0xf51fffff]
[ 0.013045] irq: irq 39 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 39
[ 0.013082] irq: irq 40 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 40
[ 0.013122] irq: irq 41 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 41
[ 0.013551] PCI 0000:00 Cannot reserve Legacy IO [0x802000-0x802fff]
[ 0.013577] pci_bus 0000:00: resource 0 io: [0x802000-0x1001fff]
[ 0.013588] pci_bus 0000:00: resource 1 mem: [0xf1000000-0xf1ffffff]
[ 0.013599] pci_bus 0000:00: resource 2 mem: [0x90000000-0x9fffffff]
[ 0.013611] pci_bus 0001:10: resource 0 io: [0x00-0x7fffff]
[ 0.013622] pci_bus 0001:10: resource 1 mem: [0xf3000000-0xf3ffffff]
[ 0.013633] pci_bus 0001:10: resource 2 mem: [0x80000000-0x8fffffff]
[ 0.013645] pci_bus 0002:20: resource 0 io: [0xff7fe000-0xffffdfff]
[ 0.013656] pci_bus 0002:20: resource 1 mem: [0xf5000000-0xf5ffffff]
[ 0.015215] bio: create slab <bio-0> at 0
[ 0.015578] vgaarb: device added: PCI:0000:00:10.0,decodes=io+mem,owns=mem,locks=none
[ 0.015635] vgaarb: loaded
[ 0.016039] Switching to clocksource timebase
[ 0.020636] NET: Registered protocol family 2
[ 0.020929] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.022102] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.024864] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.025587] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.025619] TCP reno registered
[ 0.025928] NET: Registered protocol family 1
[ 0.026249] Unpacking initramfs...
[ 0.886681] Freeing initrd memory: 9868k freed
[ 0.888574] Thermal assist unit not available
[ 0.889005] Registering PowerMac CPU frequency driver
[ 0.889031] Low: 599 Mhz, High: 1199 Mhz, Boot: 599 Mhz
[ 0.896471] audit: initializing netlink socket (disabled)
[ 0.896513] type=2000 audit(723764.892:1): initialized
[ 0.901533] highmem bounce pool size: 64 pages
[ 0.904511] VFS: Disk quotas dquot_6.5.2
[ 0.904675] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.904764] msgmni has been set to 1494
[ 0.905230] alg: No test for stdrng (krng)
[ 0.905321] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.905340] io scheduler noop registered
[ 0.905349] io scheduler anticipatory registered
[ 0.905359] io scheduler deadline registered
[ 0.905437] io scheduler cfq registered (default)
[ 0.905785] radeonfb 0000:00:10.0: enabling device (0006 -> 0007)
[ 1.101448] radeonfb 0000:00:10.0: Invalid ROM contents
[ 1.101467] radeonfb (0000:00:10.0): Invalid ROM signature 0 should be 0xaa55
[ 1.101476] radeonfb: Retrieved PLL infos from Open Firmware
[ 1.101489] radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=190.00 Mhz, System=183.00 MHz
[ 1.101505] radeonfb: PLL min 12000 max 35000
[ 1.197114] i2c i2c-2: unable to read EDID block.
[ 1.349108] i2c i2c-2: unable to read EDID block.
[ 1.501108] i2c i2c-2: unable to read EDID block.
[ 1.653108] i2c i2c-3: unable to read EDID block.
[ 1.805109] i2c i2c-3: unable to read EDID block.
[ 1.957108] i2c i2c-3: unable to read EDID block.
[ 2.013058] radeonfb: Monitor 1 type LCD found
[ 2.013068] radeonfb: EDID probed
[ 2.013077] radeonfb: Monitor 2 type no found
[ 2.013094] radeonfb: Using Firmware dividers 0x000600ad from PPLL 0
[ 2.152070] radeonfb: Dynamic Clock Power Management enabled
[ 2.179755] Console: switching to colour frame buffer device 128x48
[ 2.194154] radeonfb: Backlight initialized (radeonbl0)
[ 2.194326] radeonfb (0000:00:10.0): ATI Radeon 5c63 "\c"
[ 2.197400] Generic non-volatile memory driver v1.1
[ 2.197617] Linux agpgart interface v0.103
[ 2.197781] agpgart-uninorth 0000:00:0b.0: Apple UniNorth 2 chipset
[ 2.199801] agpgart-uninorth 0000:00:0b.0: configuring for size idx: 64
[ 2.200103] agpgart-uninorth 0000:00:0b.0: AGP aperture is 256M @ 0x0
[ 2.200379] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 2.200916] pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)
[ 2.201164] ttyPZ0 at MMIO 0x80013020 (irq = 22) is a Z85c30 ESCC - Serial port
[ 2.201454] ttyPZ1 at MMIO 0x80013000 (irq = 23) is a Z85c30 ESCC - Serial port
[ 2.201740] Serial: MPC52xx PSC UART driver
[ 2.201969] MacIO PCI driver attached to Intrepid chipset
[ 2.202462] irq: irq 32 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 32
[ 2.202670] irq: irq 24 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 24
[ 2.202684] irq: irq 12 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 16
[ 2.202750] irq: irq 5 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 17
[ 2.202763] irq: irq 6 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 18
[ 2.202852] irq: irq 7 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 19
[ 2.202866] irq: irq 8 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 20
[ 2.203168] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 2.203690] Uniform Multi-Platform E-IDE driver
[ 2.204035] ide-pmac 0002:20:0d.0: enabling device (0000 -> 0002)
[ 2.204375] adb: starting probe task...
[ 2.451116] adb devices: [2]: 2 c4 [3]: 3 1 [7]: 7 1f
[ 2.457065] ADB keyboard at 2, handler 1
[ 2.462371] Detected ADB keyboard, type ISO, swapping keys.
[ 2.467847] input: ADB keyboard as /devices/virtual/input/input1
[ 2.473282] input: ADB Powerbook buttons as /devices/virtual/input/input2
[ 2.493485] ADB mouse at 3, handler set to 4 (trackpad)
[ 2.557045] input: ADB mouse as /devices/virtual/input/input3
[ 2.562432] adb: finished probe task...
[ 3.224075] ide-pmac: Found Apple UniNorth ATA-6 controller (PCI), bus ID 3, irq 39
[ 3.229752] Probing IDE interface ide0...
[ 3.516258] hda: FUJITSU MHT2060AT, ATA DISK drive
[ 4.192133] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 4.194500] hda: UDMA/100 mode selected
[ 4.202337] ide0 at 0xf106a000-0xf106a070,0xf106a160 on irq 39
[ 5.228074] ide-pmac: Found Apple KeyLargo ATA-3 controller (macio), bus ID 0, irq 24
[ 5.233920] Probing IDE interface ide1...
[ 5.632261] hdc: MATSHITAC@-RW CW)8120, ATAPI CD/DVD-ROM drive
[ 5.972137] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 5.972266] hdc: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error }
[ 5.978236] hdc: set_drive_speed_status: error=0x00 { }
[ 5.984101] hdc: possibly failed opcode: 0x00
[ 5.989998] hdc: MWDMA1 mode selected
[ 5.996086] hdc: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error }
[ 6.002423] hdc: set_drive_speed_status: error=0x00 { }
[ 6.008772] hdc: possibly failed opcode: 0x00
[ 6.015159] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 16.016069] hdc: set_drive_speed_status: status=0xd1 { Busy }
[ 16.022547] hdc: possibly failed opcode: 0x00
[ 16.029047] ide1 at 0xf102e000-0xf102e070,0xf102e160 on irq 24
[ 16.035747] ide-gd driver 1.18
[ 16.042305] hda: max request size: 512KiB
[ 16.120289] hda: 117210240 sectors (60011 MB) w/8192KiB Cache, CHS=16383/255/63
[ 16.129968] hda: cache flushes supported
[ 16.136635] hda: [mac] hda1 hda2 hda3 hda4 hda5 hda6
[ 16.153073] mice: PS/2 mouse device common for all mice
[ 16.159839] rtc-generic rtc-generic: rtc core: registered rtc-generic as rtc0
[ 16.167205] TCP cubic registered
[ 16.174187] NET: Registered protocol family 10
[ 16.182225] Mobile IPv6
[ 16.188861] NET: Registered protocol family 17
[ 16.195655] PM: Resume from disk failed.
[ 16.195688] registered taskstats version 1
[ 16.202617] input: PMU as /devices/virtual/input/input4
[ 16.209316] Registered led device: pmu-led::front
[ 16.216075] rtc-generic rtc-generic: setting system clock to 1970-01-09 09:03:00 UTC (723780)
[ 16.222827] Initalizing network drop monitor service
[ 16.229547] Freeing unused kernel memory: 232k init
[ 16.304386] udev[40]: starting version 164
[ 16.636387] usbcore: registered new interface driver usbfs
[ 16.660022] usbcore: registered new interface driver hub
[ 16.675142] usbcore: registered new device driver usb
[ 16.689013] sungem.c:v0.98 8/24/03 David S. Miller (davem@redhat.com)
[ 16.783646] ide-cd driver 5.00
[ 16.791099] ide-cd: hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache
[ 16.797778] Uniform CD-ROM driver Revision: 3.20
[ 16.815029] PHY ID: 4061e4, addr: 0
[ 16.817407] eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:0d:93:b7:ce:6e
[ 16.823994] eth0: Found BCM5221 PHY
[ 16.844499] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 16.859914] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 16.866643] ehci_hcd 0001:10:1b.2: enabling device (0004 -> 0006)
[ 16.884264] firewire_ohci 0002:20:0e.0: enabling device (0000 -> 0002)
[ 16.894015] ehci_hcd 0001:10:1b.2: EHCI Host Controller
[ 16.909880] ehci_hcd 0001:10:1b.2: new USB bus registered, assigned bus number 1
[ 16.940745] hdc: command error: status=0x51 { DriveReady SeekComplete Error }
[ 16.947347] hdc: command error: error=0x50 { LastFailedSense=0x05 }
[ 16.953862] hdc: possibly failed opcode: 0xa0
[ 16.960779] ehci_hcd 0001:10:1b.2: irq 63, io mem 0x80080000
[ 16.980135] ehci_hcd 0001:10:1b.2: USB 2.0 started, EHCI 1.00
[ 16.986674] firewire_ohci: Added fw-ohci device 0002:20:0e.0, OHCI version 1.10
[ 16.993268] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 16.999809] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 17.006307] usb usb1: Product: EHCI Host Controller
[ 17.012765] usb usb1: Manufacturer: Linux 2.6.32-5-powerpc ehci_hcd
[ 17.019299] usb usb1: SerialNumber: 0001:10:1b.2
[ 17.029302] usb usb1: configuration #1 chosen from 1 choice
[ 17.038512] hub 1-0:1.0: USB hub found
[ 17.045118] hub 1-0:1.0: 5 ports detected
[ 17.054013] Apple USB OHCI 0001:10:18.0 disabled by firmware
[ 17.067074] b43-pci-bridge 0001:10:12.0: enabling device (0004 -> 0006)
[ 17.080297] ssb: Sonics Silicon Backplane found on PCI device 0001:10:12.0
[ 17.086935] Apple USB OHCI 0001:10:19.0 disabled by firmware
[ 17.105254] ohci_hcd 0001:10:1a.0: enabling device (0000 -> 0002)
[ 17.111886] ohci_hcd 0001:10:1a.0: OHCI Host Controller
[ 17.118366] ohci_hcd 0001:10:1a.0: new USB bus registered, assigned bus number 2
[ 17.125142] ohci_hcd 0001:10:1a.0: irq 29, io mem 0x80083000
[ 17.203688] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 17.210188] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 17.216527] usb usb2: Product: OHCI Host Controller
[ 17.222828] usb usb2: Manufacturer: Linux 2.6.32-5-powerpc ohci_hcd
[ 17.229165] usb usb2: SerialNumber: 0001:10:1a.0
[ 17.236307] usb usb2: configuration #1 chosen from 1 choice
[ 17.242824] hub 2-0:1.0: USB hub found
[ 17.249220] hub 2-0:1.0: 2 ports detected
[ 17.255732] ohci_hcd 0001:10:1b.0: enabling device (0000 -> 0002)
[ 17.262197] ohci_hcd 0001:10:1b.0: OHCI Host Controller
[ 17.268699] ohci_hcd 0001:10:1b.0: new USB bus registered, assigned bus number 3
[ 17.275105] ohci_hcd 0001:10:1b.0: irq 63, io mem 0x80082000
[ 17.356027] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 17.362352] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 17.368623] usb usb3: Product: OHCI Host Controller
[ 17.374813] usb usb3: Manufacturer: Linux 2.6.32-5-powerpc ohci_hcd
[ 17.381033] usb usb3: SerialNumber: 0001:10:1b.0
[ 17.387760] usb usb3: configuration #1 chosen from 1 choice
[ 17.394093] hub 3-0:1.0: USB hub found
[ 17.400170] hub 3-0:1.0: 3 ports detected
[ 17.406663] ohci_hcd 0001:10:1b.1: enabling device (0000 -> 0002)
[ 17.412704] ohci_hcd 0001:10:1b.1: OHCI Host Controller
[ 17.418677] ohci_hcd 0001:10:1b.1: new USB bus registered, assigned bus number 4
[ 17.424688] ohci_hcd 0001:10:1b.1: irq 63, io mem 0x80081000
[ 17.484224] firewire_core: created device fw0: GUID 000d93fffeb7ce6e, S400
[ 17.511522] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 17.517625] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 17.523605] usb usb4: Product: OHCI Host Controller
[ 17.529554] usb usb4: Manufacturer: Linux 2.6.32-5-powerpc ohci_hcd
[ 17.535501] usb usb4: SerialNumber: 0001:10:1b.1
[ 17.541768] usb usb4: configuration #1 chosen from 1 choice
[ 17.547878] hub 4-0:1.0: USB hub found
[ 17.553800] hub 4-0:1.0: 2 ports detected
[ 17.657809] PM: Starting manual resume from disk
[ 17.663890] PM: Resume from partition 3:4
[ 17.663894] PM: Checking hibernation image.
[ 17.664341] PM: Error -22 checking image file
[ 17.664346] PM: Resume from disk failed.
[ 17.761981] kjournald starting. Commit interval 5 seconds
[ 17.768152] EXT3-fs: mounted filesystem with ordered data mode.
[ 19.898454] udev[186]: starting version 164
[ 20.616938] PowerMac i2c bus pmu 2 registered
[ 20.624461] PowerMac i2c bus pmu 1 registered
[ 20.632567] PowerMac i2c bus mac-io 0 registered
[ 20.639759] PowerMac i2c bus uni-n 1 registered
[ 20.646470] PowerMac i2c bus uni-n 0 registered
[ 20.672923] hdc: command error: status=0x51 { DriveReady SeekComplete Error }
[ 20.679453] hdc: command error: error=0x50 { LastFailedSense=0x05 }
[ 20.685838] hdc: possibly failed opcode: 0xa0
[ 20.787647] hdc: command error: status=0x51 { DriveReady SeekComplete Error }
[ 20.794217] hdc: command error: error=0x50 { LastFailedSense=0x05 }
[ 20.800656] hdc: possibly failed opcode: 0xa0
[ 21.654566] cfg80211: Using static regulatory domain info
[ 21.661117] cfg80211: Regulatory domain: US
[ 21.667471] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 21.674028] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 21.680592] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 21.687107] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 21.693517] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 21.699815] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 21.705963] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 21.775481] cfg80211: Calling CRDA for country: US
[ 22.156491] b43-phy0: Broadcom 4306 WLAN found (core revision 5)
[ 22.295960] phy0: Selected rate control algorithm 'minstrel'
[ 22.297298] Registered led device: b43-phy0::tx
[ 22.303855] Registered led device: b43-phy0::rx
[ 22.309977] Registered led device: b43-phy0::radio
[ 22.317220] Broadcom 43xx driver loaded [ Features: PMLS, Firmware-ID: FW13 ]
[ 24.526619] Adding 2148428k swap on /dev/hda4. Priority:-1 extents:1 across:2148428k
[ 25.003231] EXT3 FS on hda3, internal journal
[ 25.317330] SCSI subsystem initialized
[ 25.454142] loop: module loaded
[ 25.568494] irq: irq 1 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 21
[ 25.568537] irq: irq 2 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 30
[ 25.575707] irq: irq 61 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 61
[ 25.988641] input: PowerMac Beep as /devices/pci0001:10/0001:10:17.0/input/input5
[ 27.703599] kjournald starting. Commit interval 5 seconds
[ 27.710131] EXT3 FS on hda5, internal journal
[ 27.716410] EXT3-fs: mounted filesystem with ordered data mode.
[ 29.472426] fuse init (API version 7.13)
[ 36.308155] b43 ssb0:0: firmware: requesting b43/ucode5.fw
[ 36.395015] b43 ssb0:0: firmware: requesting b43/pcm5.fw
[ 36.421012] b43 ssb0:0: firmware: requesting b43/b0g0initvals5.fw
[ 36.459331] b43 ssb0:0: firmware: requesting b43/b0g0bsinitvals5.fw
[ 36.608141] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[ 36.677148] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 36.699283] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 48.087195] radeonfb 0000:00:10.0: Invalid ROM contents
[ 48.087339] radeonfb 0000:00:10.0: Invalid ROM contents
[ 48.257291] [drm] Initialized drm 1.1.0 20060810
[ 48.642980] [drm] radeon defaulting to userspace modesetting.
[ 48.645561] [drm] Initialized radeon 1.32.0 20080528 for 0000:00:10.0 on minor 0
[ 49.505391] agpgart-uninorth 0000:00:0b.0: putting AGP V2 device into 4x mode
[ 49.505407] radeonfb 0000:00:10.0: putting AGP V2 device into 4x mode
[ 49.807464] [drm] Setting GART location based on new memory map
[ 49.807607] [drm] Loading R200 Microcode
[ 49.809265] platform radeon_cp.0: firmware: requesting radeon/R200_cp.bin
[ 49.829423] radeon_cp: Failed to load firmware "radeon/R200_cp.bin"
[ 49.829435] [drm:radeon_do_init_cp] *ERROR* Failed to load firmware!
[ 50.292830] Bluetooth: Core ver 2.15
[ 50.292967] NET: Registered protocol family 31
[ 50.292972] Bluetooth: HCI device and connection manager initialized
[ 50.292979] Bluetooth: HCI socket layer initialized
[ 50.368028] Bluetooth: L2CAP ver 2.14
[ 50.368039] Bluetooth: L2CAP socket layer initialized
[ 50.537925] Bluetooth: RFCOMM TTY layer initialized
[ 50.537941] Bluetooth: RFCOMM socket layer initialized
[ 50.537946] Bluetooth: RFCOMM ver 1.11
[ 50.970212] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 50.970225] Bluetooth: BNEP filters: protocol multicast
[ 51.288513] Bridge firewalling registered
[ 51.512385] Bluetooth: SCO (Voice Link) ver 0.6
[ 51.512395] Bluetooth: SCO socket layer initialized
[ 54.777393] ondemand governor failed, too long transition latency of HW, fallback to performance governor
[ 55.065857] hdc: command error: status=0x51 { DriveReady SeekComplete Error }
[ 55.065873] hdc: command error: error=0x50 { LastFailedSense=0x05 }
[ 55.065881] hdc: possibly failed opcode: 0xa0
[ 55.167742] hdc: command error: status=0x51 { DriveReady SeekComplete Error }
[ 55.167758] hdc: command error: error=0x50 { LastFailedSense=0x05 }
[ 55.167765] hdc: possibly failed opcode: 0xa0
[ 56.971440] input: Mouseemu virtual keyboard as /devices/virtual/input/input6
[ 56.974659] input: Mouseemu virtual mouse as /devices/virtual/input/input7
[ 57.797222] hdc: command error: status=0x51 { DriveReady SeekComplete Error }
[ 57.797238] hdc: command error: error=0x50 { LastFailedSense=0x05 }
[ 57.797245] hdc: possibly failed opcode: 0xa0
[ 57.899562] hdc: command error: status=0x51 { DriveReady SeekComplete Error }
[ 57.899578] hdc: command error: error=0x50 { LastFailedSense=0x05 }