salut
oui,oui j'avais lu les info du wiki debian.org concernant les rtl819x, mais le passage qui parle de squeeze ne mentionne pas le rtl8188cus alors que le passage sur wheezy oui; donc je me suis dit que la procédure à suivre sous squeeze n'était pas pour moi et je suis parti sur le script mad in realteck.
donc là comme j'ai installé le deb des backports, je vais "finir" la procédure pour squeeze indiquée sur debian.org(telechargement du machin chez realtek et cp dans le bon rep), si ça ne marche pas, j'install une deb minimal avec les backports et je retente l'install des depots ça installera le même qui est dans wheezy et c'est sensé marcher (avec telechargement du bidul realteck)
c'est bien hein? c'est simple, on voit qu'ils pensent à nous chez realteck, ça leur coutait quoi de pondre un deb et un rpm? Mais bon la palme revient quand même à netgear qu'est pas foutu d'écrire clairement quel chipset il fout dans ses clefs
merci à vous en tous cas
et voilas le dmesg:
# dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-686 (Debian 2.6.32-47) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Mon Jan 21 04:01:23 UTC 2013
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000002bef0000 (usable)
[ 0.000000] BIOS-e820: 000000002bef0000 - 000000002beff000 (ACPI data)
[ 0.000000] BIOS-e820: 000000002beff000 - 000000002bf00000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000002bf00000 - 000000002c000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] last_pfn = 0x2bef0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D5FFF write-protect
[ 0.000000] D6000-DEFFF uncachable
[ 0.000000] DF000-DFFFF write-protect
[ 0.000000] E0000-E3FFF write-back
[ 0.000000] E4000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FE0000000 write-back
[ 0.000000] 1 base 020000000 mask FF8000000 write-back
[ 0.000000] 2 base 028000000 mask FFC000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] init_memory_mapping: 0000000000000000-000000002bef0000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 002bc00000 page 2M
[ 0.000000] 002bc00000 - 002bef0000 page 4k
[ 0.000000] kernel direct mapping tables up to 2bef0000 @ 7000-d000
[ 0.000000] RAMDISK: 2071f000 - 20f73f01
[ 0.000000] ACPI: RSDP 000f7fe0 00014 (v00 PTLTD )
[ 0.000000] ACPI: RSDT 2befbcce 0002C (v01 PTLTD RSDT 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 2befee74 00074 (v01 NEC ND000080 06040000 MSTF 0100000E)
[ 0.000000] ACPI: DSDT 2befbcfa 0317A (v01 NEC ND000080 06040000 MSFT 0100000E)
[ 0.000000] ACPI: FACS 2befffc0 00040
[ 0.000000] ACPI: SSDT 2befeee8 00118 (v01 PTLTD POWERNOW 06040000 LTP 00000001)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 702MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 2bef0000
[ 0.000000] low ram: 0 - 2bef0000
[ 0.000000] node 0 low ram: 00000000 - 2bef0000
[ 0.000000] node 0 bootmap 00009000 - 0000e7e0
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 002bef0000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0001000000 - 00014ced2c] TEXT DATA BSS ==> [0001000000 - 00014ced2c]
[ 0.000000] #4 [002071f000 - 0020f73f01] RAMDISK ==> [002071f000 - 0020f73f01]
[ 0.000000] #5 [000009f400 - 0000100000] BIOS reserved ==> [000009f400 - 0000100000]
[ 0.000000] #6 [00014cf000 - 00014d51a0] BRK ==> [00014cf000 - 00014d51a0]
[ 0.000000] #7 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
[ 0.000000] #8 [0000009000 - 000000f000] BOOTMAP ==> [0000009000 - 000000f000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0002bef0
[ 0.000000] HighMem 0x0002bef0 -> 0x0002bef0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0002bef0
[ 0.000000] On node 0 totalpages: 179855
[ 0.000000] free_area_init_node: node 0, pgdat c13b6900, node_mem_map c14d7000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3967 pages, LIFO batch:0
[ 0.000000] Normal zone: 1374 pages used for memmap
[ 0.000000] Normal zone: 174482 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] APIC: disable apic facility
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 2c000000 (gap: 2c000000:d3f80000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c1c00000 s34360 r0 d22984 u4194304
[ 0.000000] pcpu-alloc: s34360 r0 d22984 u4194304 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 178449
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=76f92854-f31b-47b8-98ff-045ede997765 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 698968k/719808k available (2509k kernel code, 20020k reserved, 1332k data, 380k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB)
[ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.000000] vmalloc : 0xec6f0000 - 0xff3fe000 ( 301 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xebef0000 ( 702 MB)
[ 0.000000] .init : 0xc13c1000 - 0xc1420000 ( 380 kB)
[ 0.000000] .data : 0xc12734d3 - 0xc13c0504 (1332 kB)
[ 0.000000] .text : 0xc1000000 - 0xc12734d3 (2509 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:1280
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1666.422 MHz processor.
[ 0.004009] Calibrating delay loop (skipped), value calculated using timer frequency.. 3332.84 BogoMIPS (lpj=6665688)
[ 0.004042] Security Framework initialized
[ 0.004052] SELinux: Disabled at boot.
[ 0.004065] Mount-cache hash table entries: 512
[ 0.004280] Initializing cgroup subsys ns
[ 0.004286] Initializing cgroup subsys cpuacct
[ 0.004293] Initializing cgroup subsys devices
[ 0.004298] Initializing cgroup subsys freezer
[ 0.004301] Initializing cgroup subsys net_cls
[ 0.004336] Enabling disabled K7/SSE Support.
[ 0.004341] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004346] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.004353] mce: CPU supports 4 MCE banks
[ 0.004383] Performance Events: AMD PMU driver.
[ 0.004394] ... version: 0
[ 0.004397] ... bit width: 48
[ 0.004399] ... generic registers: 4
[ 0.004402] ... value mask: 0000ffffffffffff
[ 0.004405] ... max period: 00007fffffffffff
[ 0.004408] ... fixed-purpose events: 0
[ 0.004411] ... event mask: 000000000000000f
[ 0.004417] Checking 'hlt' instruction... OK.
[ 0.020418] SMP alternatives: switching to UP code
[ 0.025235] Freeing SMP alternatives: 13k freed
[ 0.025255] ACPI: Core revision 20090903
[ 0.031104] ACPI: setting ELCR to 0200 (from 06b8)
[ 0.032163] Enabling APIC mode: Flat. Using 0 I/O APICs
[ 0.032168] weird, boot CPU (#0) not listed by the BIOS.
[ 0.032171] SMP motherboard not detected.
[ 0.032175] Local APIC not detected. Using dummy APIC emulation.
[ 0.032178] SMP disabled
[ 0.032583] Brought up 1 CPUs
[ 0.032587] Total of 1 processors activated (3332.84 BogoMIPS).
[ 0.032609] CPU0 attaching NULL sched-domain.
[ 0.032815] devtmpfs: initialized
[ 0.033520] regulator: core version 0.5
[ 0.033615] NET: Registered protocol family 16
[ 0.033770] ACPI: bus type pci registered
[ 0.034201] PCI: PCI BIOS revision 2.10 entry at 0xfd9b3, last bus=1
[ 0.034763] bio: create slab <bio-0> at 0
[ 0.035291] ACPI: EC: Look up EC in DSDT
[ 0.038272] ACPI: Interpreter enabled
[ 0.038279] ACPI: (supports S0 S3 S4 S5)
[ 0.038304] ACPI: Using PIC for interrupt routing
[ 0.044504] ACPI: EC: GPE = 0x1b, I/O: command/status = 0x66, data = 0x62
[ 0.044563] ACPI: Power Resource [QFAN] (off)
[ 0.044694] ACPI: No dock devices found.
[ 0.044851] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.044927] pci 0000:00:00.0: reg 10 32bit mmio: [0xe8000000-0xebffffff]
[ 0.045162] pci 0000:00:02.0: Enabling SiS 96x SMBus
[ 0.045234] pci 0000:00:02.1: reg 20 io port: [0x8100-0x811f]
[ 0.045297] pci 0000:00:02.5: reg 10 io port: [0x1f0-0x1f7]
[ 0.045308] pci 0000:00:02.5: reg 14 io port: [0x3f4-0x3f7]
[ 0.045318] pci 0000:00:02.5: reg 18 io port: [0x170-0x177]
[ 0.045329] pci 0000:00:02.5: reg 1c io port: [0x374-0x377]
[ 0.045339] pci 0000:00:02.5: reg 20 io port: [0x2800-0x280f]
[ 0.045413] pci 0000:00:02.6: reg 10 io port: [0x1000-0x10ff]
[ 0.045424] pci 0000:00:02.6: reg 14 io port: [0x2400-0x247f]
[ 0.045501] pci 0000:00:02.6: supports D1 D2
[ 0.045504] pci 0000:00:02.6: PME# supported from D3hot D3cold
[ 0.045512] pci 0000:00:02.6: PME# disabled
[ 0.045568] pci 0000:00:02.7: reg 10 io port: [0x1400-0x14ff]
[ 0.045579] pci 0000:00:02.7: reg 14 io port: [0x2480-0x24ff]
[ 0.045655] pci 0000:00:02.7: supports D1 D2
[ 0.045658] pci 0000:00:02.7: PME# supported from D3hot D3cold
[ 0.045665] pci 0000:00:02.7: PME# disabled
[ 0.045701] pci 0000:00:03.0: reg 10 32bit mmio: [0xec004000-0xec004fff]
[ 0.045786] pci 0000:00:03.1: reg 10 32bit mmio: [0xec005000-0xec005fff]
[ 0.045884] pci 0000:00:03.2: reg 10 32bit mmio: [0xec006000-0xec006fff]
[ 0.045964] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold
[ 0.045971] pci 0000:00:03.2: PME# disabled
[ 0.046032] pci 0000:00:04.0: reg 10 io port: [0x1800-0x18ff]
[ 0.046043] pci 0000:00:04.0: reg 14 32bit mmio: [0xec007000-0xec007fff]
[ 0.046082] pci 0000:00:04.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[ 0.046123] pci 0000:00:04.0: supports D1 D2
[ 0.046126] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.046133] pci 0000:00:04.0: PME# disabled
[ 0.046196] pci 0000:00:0a.0: reg 10 32bit mmio: [0xec008000-0xec008fff]
[ 0.046240] pci 0000:00:0a.0: supports D1 D2
[ 0.046243] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.046250] pci 0000:00:0a.0: PME# disabled
[ 0.046303] pci 0000:00:0a.1: reg 10 32bit mmio: [0xec009000-0xec0097ff]
[ 0.046314] pci 0000:00:0a.1: reg 14 32bit mmio: [0xec000000-0xec003fff]
[ 0.046392] pci 0000:00:0a.1: supports D1 D2
[ 0.046395] pci 0000:00:0a.1: PME# supported from D0 D1 D2 D3hot
[ 0.046401] pci 0000:00:0a.1: PME# disabled
[ 0.046514] pci 0000:01:00.0: reg 10 32bit mmio pref: [0xf0000000-0xf7ffffff]
[ 0.046523] pci 0000:01:00.0: reg 14 32bit mmio: [0xec300000-0xec31ffff]
[ 0.046532] pci 0000:01:00.0: reg 18 io port: [0xa000-0xa07f]
[ 0.046595] pci 0000:01:00.0: supports D1 D2
[ 0.046661] pci 0000:00:01.0: bridge io port: [0xa000-0xafff]
[ 0.046668] pci 0000:00:01.0: bridge 32bit mmio: [0xec300000-0xec3fffff]
[ 0.046676] pci 0000:00:01.0: bridge 32bit mmio pref: [0xf0000000-0xf7ffffff]
[ 0.046713] pci_bus 0000:00: on NUMA node 0
[ 0.046719] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.057728] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 *7 10)
[ 0.057866] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10) *9
[ 0.057999] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10)
[ 0.058132] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 7 10)
[ 0.058297] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10) *9
[ 0.058431] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 *10)
[ 0.058563] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10) *0, disabled.
[ 0.058695] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 7 10)
[ 0.058852] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.058857] vgaarb: loaded
[ 0.058966] PCI: Using ACPI for IRQ routing
[ 0.059216] Switching to clocksource tsc
[ 0.060003] pnp: PnP ACPI init
[ 0.060003] ACPI: bus type pnp registered
[ 0.060977] pnp: PnP ACPI: found 8 devices
[ 0.060981] ACPI: ACPI bus type pnp unregistered
[ 0.060988] PnPBIOS: Disabled by ACPI PNP
[ 0.061011] system 00:04: ioport range 0x8000-0x808f has been reserved
[ 0.061016] system 00:04: ioport range 0x8100-0x811f has been reserved
[ 0.061020] system 00:04: ioport range 0x4d0-0x4d1 has been reserved
[ 0.061025] system 00:04: ioport range 0xfe00-0xfe00 has been reserved
[ 0.061029] system 00:04: ioport range 0x200-0x20f has been reserved
[ 0.061034] system 00:04: ioport range 0x481-0x483 has been reserved
[ 0.061038] system 00:04: ioport range 0x487-0x487 has been reserved
[ 0.061042] system 00:04: ioport range 0x489-0x489 has been reserved
[ 0.061047] system 00:04: ioport range 0x48a-0x48b has been reserved
[ 0.061051] system 00:04: ioport range 0x48f-0x48f has been reserved
[ 0.061058] system 00:04: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.061062] system 00:04: iomem range 0xffee0000-0xffef5fff has been reserved
[ 0.061067] system 00:04: iomem range 0xffef6000-0xffefffff has been reserved
[ 0.061072] system 00:04: iomem range 0xfec00000-0xfec0ffff has been reserved
[ 0.061077] system 00:04: iomem range 0xd0000-0xfffff could not be reserved
[ 0.095980] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.095987] pci 0000:00:01.0: IO window: 0xa000-0xafff
[ 0.095997] pci 0000:00:01.0: MEM window: 0xec300000-0xec3fffff
[ 0.096004] pci 0000:00:01.0: PREFETCH window: 0xf0000000-0xf7ffffff
[ 0.096016] pci 0000:00:0a.0: CardBus bridge, secondary bus 0000:02
[ 0.096020] pci 0000:00:0a.0: IO window: 0x001c00-0x001cff
[ 0.096027] pci 0000:00:0a.0: IO window: 0x002000-0x0020ff
[ 0.096034] pci 0000:00:0a.0: PREFETCH window: 0x2c000000-0x2fffffff
[ 0.096041] pci 0000:00:0a.0: MEM window: 0x30000000-0x33ffffff
[ 0.096290] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
[ 0.096295] PCI: setting IRQ 10 as level-triggered
[ 0.096302] pci 0000:00:0a.0: PCI INT A -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
[ 0.096314] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.096318] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.096323] pci_bus 0000:01: resource 0 io: [0xa000-0xafff]
[ 0.096327] pci_bus 0000:01: resource 1 mem: [0xec300000-0xec3fffff]
[ 0.096331] pci_bus 0000:01: resource 2 pref mem [0xf0000000-0xf7ffffff]
[ 0.096335] pci_bus 0000:02: resource 0 io: [0x1c00-0x1cff]
[ 0.096339] pci_bus 0000:02: resource 1 io: [0x2000-0x20ff]
[ 0.096342] pci_bus 0000:02: resource 2 pref mem [0x2c000000-0x2fffffff]
[ 0.096346] pci_bus 0000:02: resource 3 mem: [0x30000000-0x33ffffff]
[ 0.096408] NET: Registered protocol family 2
[ 0.096560] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.097380] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.100297] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.101797] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.101802] TCP reno registered
[ 0.101998] NET: Registered protocol family 1
[ 0.102424] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10
[ 0.102433] pci 0000:00:03.0: PCI INT A -> Link[LNKE] -> GSI 10 (level, low) -> IRQ 10
[ 0.320827] pci 0000:00:03.0: PCI INT A disabled
[ 0.321037] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 10
[ 0.321043] pci 0000:00:03.1: PCI INT B -> Link[LNKF] -> GSI 10 (level, low) -> IRQ 10
[ 0.536864] pci 0000:00:03.1: PCI INT B disabled
[ 0.537078] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 3
[ 0.537082] PCI: setting IRQ 3 as level-triggered
[ 0.537088] pci 0000:00:03.2: PCI INT D -> Link[LNKH] -> GSI 3 (level, low) -> IRQ 3
[ 0.537108] pci 0000:00:03.2: PCI INT D disabled
[ 0.537125] pci 0000:01:00.0: Boot video device
[ 0.537230] Unpacking initramfs...
[ 0.862151] Freeing initrd memory: 8531k freed
[ 0.882915] audit: initializing netlink socket (disabled)
[ 0.882945] type=2000 audit(1360065719.556:1): initialized
[ 0.886927] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.889349] VFS: Disk quotas dquot_6.5.2
[ 0.889438] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.889582] msgmni has been set to 1382
[ 0.889919] alg: No test for stdrng (krng)
[ 0.889963] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.889968] io scheduler noop registered
[ 0.889971] io scheduler anticipatory registered
[ 0.889974] io scheduler deadline registered
[ 0.890026] io scheduler cfq registered (default)
[ 0.890296] isapnp: Scanning for PnP cards...
[ 1.243805] isapnp: No Plug & Play device found
[ 1.245970] Linux agpgart interface v0.103
[ 1.246109] agpgart-sis 0000:00:00.0: SiS chipset [1039/0740]
[ 1.252224] agpgart-sis 0000:00:00.0: AGP aperture is 64M @ 0xe8000000
[ 1.252314] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.253081] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
[ 1.253086] PCI: setting IRQ 5 as level-triggered
[ 1.253093] serial 0000:00:02.6: PCI INT C -> Link[LNKC] -> GSI 5 (level, low) -> IRQ 5
[ 1.253103] serial 0000:00:02.6: PCI INT C disabled
[ 1.253243] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MSE1] at 0x60,0x64 irq 1,12
[ 1.257860] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.257880] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.258039] mice: PS/2 mouse device common for all mice
[ 1.258190] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.258216] rtc0: alarms up to one year, y3k, 114 bytes nvram
[ 1.258233] cpuidle: using governor ladder
[ 1.258237] cpuidle: using governor menu
[ 1.258245] No iBFT detected.
[ 1.258865] TCP cubic registered
[ 1.259090] NET: Registered protocol family 10
[ 1.260364] Mobile IPv6
[ 1.260369] NET: Registered protocol family 17
[ 1.260406] Using IPI No-Shortcut mode
[ 1.260508] PM: Resume from disk failed.
[ 1.260528] registered taskstats version 1
[ 1.260864] rtc_cmos 00:02: setting system clock to 2013-02-05 12:02:01 UTC (1360065721)
[ 1.260935] Initalizing network drop monitor service
[ 1.261008] Freeing unused kernel memory: 380k freed
[ 1.261759] Write protecting the kernel text: 2512k
[ 1.261788] Write protecting the kernel read-only data: 924k
[ 1.287427] udev[46]: starting version 164
[ 1.293002] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.544731] usbcore: registered new interface driver usbfs
[ 1.545219] usbcore: registered new interface driver hub
[ 1.545458] usbcore: registered new device driver usb
[ 1.551160] SCSI subsystem initialized
[ 1.593930] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.594007] ehci_hcd 0000:00:03.2: PCI INT D -> Link[LNKH] -> GSI 3 (level, low) -> IRQ 3
[ 1.594057] ehci_hcd 0000:00:03.2: EHCI Host Controller
[ 1.594130] ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 1
[ 1.594215] ehci_hcd 0000:00:03.2: cache line size of 64 is not supported
[ 1.594233] ehci_hcd 0000:00:03.2: irq 3, io mem 0xec006000
[ 1.604119] ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00
[ 1.604189] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.604193] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.604198] usb usb1: Product: EHCI Host Controller
[ 1.604201] usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
[ 1.604204] usb usb1: SerialNumber: 0000:00:03.2
[ 1.604386] usb usb1: configuration #1 chosen from 1 choice
[ 1.604441] hub 1-0:1.0: USB hub found
[ 1.604468] hub 1-0:1.0: 6 ports detected
[ 1.607054] firewire_ohci 0000:00:0a.1: PCI INT B -> Link[LNKC] -> GSI 5 (level, low) -> IRQ 5
[ 1.607191] sis900.c: v1.08.10 Apr. 2 2006
[ 1.609333] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.609354] ACPI: Thermal Zone [THRM] (69 C)
[ 1.611223] libata version 3.00 loaded.
[ 1.628813] fan PNP0C0B:00: registered as cooling_device0
[ 1.628825] ACPI: Fan [FAN] (off)
[ 1.630037] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.676037] firewire_ohci: Added fw-ohci device 0000:00:0a.1, OHCI version 1.10
[ 1.676650] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 4
[ 1.676655] PCI: setting IRQ 4 as level-triggered
[ 1.676663] sis900 0000:00:04.0: PCI INT A -> Link[LNKD] -> GSI 4 (level, low) -> IRQ 4
[ 1.678078] 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1.
[ 1.689396] 0000:00:04.0: Using transceiver found at address 1 as default
[ 1.691838] eth0: SiS 900 PCI Fast Ethernet at 0x1800, IRQ 4, 00:0d:5e:e4:f1:b8
[ 1.691873] pata_sis 0000:00:02.5: version 0.5.2
[ 1.692221] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 7
[ 1.692225] PCI: setting IRQ 7 as level-triggered
[ 1.692232] pata_sis 0000:00:02.5: PCI INT A -> Link[LNKA] -> GSI 7 (level, low) -> IRQ 7
[ 1.693822] scsi0 : pata_sis
[ 1.694103] scsi1 : pata_sis
[ 1.695011] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x2800 irq 14
[ 1.695016] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x2808 irq 15
[ 1.695252] ohci_hcd 0000:00:03.0: PCI INT A -> Link[LNKE] -> GSI 10 (level, low) -> IRQ 10
[ 1.695307] ohci_hcd 0000:00:03.0: OHCI Host Controller
[ 1.695334] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
[ 1.695372] ohci_hcd 0000:00:03.0: irq 10, io mem 0xec004000
[ 1.748074] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.748079] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.748084] usb usb2: Product: OHCI Host Controller
[ 1.748087] usb usb2: Manufacturer: Linux 2.6.32-5-686 ohci_hcd
[ 1.748090] usb usb2: SerialNumber: 0000:00:03.0
[ 1.748273] usb usb2: configuration #1 chosen from 1 choice
[ 1.748325] hub 2-0:1.0: USB hub found
[ 1.748345] hub 2-0:1.0: 3 ports detected
[ 1.748429] ohci_hcd 0000:00:03.1: PCI INT B -> Link[LNKF] -> GSI 10 (level, low) -> IRQ 10
[ 1.748459] ohci_hcd 0000:00:03.1: OHCI Host Controller
[ 1.748472] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
[ 1.748502] ohci_hcd 0000:00:03.1: irq 10, io mem 0xec005000
[ 1.804105] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.804113] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.804118] usb usb3: Product: OHCI Host Controller
[ 1.804121] usb usb3: Manufacturer: Linux 2.6.32-5-686 ohci_hcd
[ 1.804124] usb usb3: SerialNumber: 0000:00:03.1
[ 1.804335] usb usb3: configuration #1 chosen from 1 choice
[ 1.804389] hub 3-0:1.0: USB hub found
[ 1.804412] hub 3-0:1.0: 3 ports detected
[ 1.856435] ata1.00: ATA-6: IC25N040ATMR04-0, MO2OAD4A, max UDMA/100
[ 1.856440] ata1.00: 78140160 sectors, multi 16: LBA48
[ 1.872448] ata1.00: configured for UDMA/100
[ 1.872686] scsi 0:0:0:0: Direct-Access ATA IC25N040ATMR04-0 MO2O PQ: 0 ANSI: 5
[ 1.916042] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 2.028171] ata2.01: NODEV after polling detection
[ 2.036462] ata2.00: ATAPI: QSI DVDRW SDW-041, DX43, max UDMA/33
[ 2.049800] usb 1-1: New USB device found, idVendor=0846, idProduct=9041
[ 2.049805] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.049810] usb 1-1: Product: 802.11n WLAN Adapter
[ 2.049813] usb 1-1: Manufacturer: Realtek
[ 2.049815] usb 1-1: SerialNumber: 00e04c000001
[ 2.050427] usb 1-1: configuration #1 chosen from 1 choice
[ 2.052560] ata2.00: configured for UDMA/33
[ 2.056896] scsi 1:0:0:0: CD-ROM QSI DVDRW SDW-041 DX43 PQ: 0 ANSI: 5
[ 2.089030] sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.2 GiB)
[ 2.089121] sd 0:0:0:0: [sda] Write Protect is off
[ 2.089126] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.089163] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.089390] sda:sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 2.092491] Uniform CD-ROM driver Revision: 3.20
[ 2.092934] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.113966] sda1 sda2 < sda5 >
[ 2.138572] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.154216] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.154791] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.176321] firewire_core: created device fw0: GUID 00004ce036e4f1b8, S400
[ 2.575760] PM: Starting manual resume from disk
[ 2.575770] PM: Resume from partition 8:5
[ 2.575773] PM: Checking hibernation image.
[ 2.607639] PM: Error -22 checking image file
[ 2.607643] PM: Resume from disk failed.
[ 2.685037] kjournald starting. Commit interval 5 seconds
[ 2.685059] EXT3-fs: mounted filesystem with ordered data mode.
[ 5.269344] udev[255]: starting version 164
[ 6.213314] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 6.218664] ACPI: Lid Switch [LID]
[ 6.218835] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 6.218845] ACPI: Power Button [PWB]
[ 6.218992] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 6.218999] ACPI: Power Button [PWRF]
[ 6.235488] yenta_cardbus 0000:00:0a.0: CardBus bridge found [1033:8218]
[ 6.235522] yenta_cardbus 0000:00:0a.0: Enabling burst memory read transactions
[ 6.235529] yenta_cardbus 0000:00:0a.0: Using CSCINT to route CSC interrupts to PCI
[ 6.235533] yenta_cardbus 0000:00:0a.0: Routing CardBus interrupts to PCI
[ 6.235541] yenta_cardbus 0000:00:0a.0: TI: mfunc 0x002c1222, devctl 0x66
[ 6.465054] yenta_cardbus 0000:00:0a.0: ISA IRQ mask 0x0840, PCI irq 10
[ 6.465062] yenta_cardbus 0000:00:0a.0: Socket status: 30000086
[ 6.776273] Marking TSC unstable due to TSC halts in idle
[ 6.777705] processor LNXCPU:00: registered as cooling_device1
[ 6.778041] Switching to clocksource acpi_pm
[ 6.988936] ACPI: AC Adapter [ACAD] (off-line)
[ 6.996229] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 7.192535] ACPI: Battery Slot [BAT1] (battery present)
[ 7.261701] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x8100
[ 7.422232] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 7.569533] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[ 7.571325] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
[ 7.572210] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 7.572857] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 7.573713] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 7.697218] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input5
[ 7.714219] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input6
[ 7.788716] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 8.645671] Intel ICH Modem 0000:00:02.6: PCI INT C -> Link[LNKC] -> GSI 5 (level, low) -> IRQ 5
[ 8.665859] Intel ICH 0000:00:02.7: PCI INT C -> Link[LNKC] -> GSI 5 (level, low) -> IRQ 5
[ 9.592124] intel8x0_measure_ac97_clock: measured 55396 usecs (2665 samples)
[ 9.592132] intel8x0: clocking to 48000
[ 10.219121] Adding 1382392k swap on /dev/sda5. Priority:-1 extents:1 across:1382392k
[ 10.596844] EXT3 FS on sda1, internal journal
[ 10.838773] loop: module loaded
[ 10.969734] rtw driver version=v3.4.4_4749.20121105
[ 10.969741] Build at: Feb 4 2013 13:26:18
[ 10.969813] usbcore: registered new interface driver rtl8192cu
[ 12.691269] fuse init (API version 7.13)
[ 14.914947] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input7
[ 22.045125] eth0: Media Link On 100mbps full-duplex
[ 22.469786] apm: BIOS not found.
[ 24.410214] Bluetooth: Core ver 2.15
[ 24.410326] NET: Registered protocol family 31
[ 24.410330] Bluetooth: HCI device and connection manager initialized
[ 24.410336] Bluetooth: HCI socket layer initialized
[ 24.472086] Bluetooth: L2CAP ver 2.14
[ 24.472091] Bluetooth: L2CAP socket layer initialized
[ 24.680187] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 24.680193] Bluetooth: BNEP filters: protocol multicast
[ 24.783971] Bridge firewalling registered
[ 24.884099] Bluetooth: SCO (Voice Link) ver 0.6
[ 24.884105] Bluetooth: SCO socket layer initialized
[ 25.841613] lp: driver loaded but no devices found
[ 25.886978] ppdev: user-space parallel port driver
[ 30.558987] powernow: PowerNOW! Technology present. Can scale: frequency and voltage.
[ 30.562478] powernow: SGTC: 13333
[ 30.562482] powernow: Minimum speed 533 MHz. Maximum speed 1666 MHz.
[ 30.996060] eth0: no IPv6 routers present
[ 181.619605] UDF-fs: No VRS found
[ 181.619624] UDF-fs: No partition found (1)
[ 181.698612] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 181.902125] ISO 9660 Extensions: RRIP_1991A
excusez pour le roman, mais je sai pas trop ce qu'on cherche
Dernière modification par bundy (05-02-2013 13:54:40)