[RESOLU] Freeze au lancement de GNOME

anonyme · 27-01-2019 15:36:29

sur mon pc de bureau avec nvidia et cuda j'ai pas de message d'erreur , bon du grand n'importe quoi mais sans erreurs

apt-get -s --reinstall install bumblebee-nvidia primus

 

tu dois avoir des choses qui posent problème encore sur la machine
tu n'est pas le seul => https://debian-facile.org/viewtopic.php … 58#p290958

Dernière modification par anonyme (27-01-2019 23:06:23)

anonyme · 29-01-2019 23:06:49

Bonsoir
pas de nouvelles ?
je fais fuir tous les utilisateurs de portable avec bumblebee

pas cool tout ça

Dernière modification par anonyme (29-01-2019 23:07:09)

Lam3ch · 31-01-2019 08:33:18

Bonjour,

Non non ^^ Désolé je n'ai pas trop eu de temps à consacrer à mon portable c'est dernier temps je vais essayer de m'y mettre aujourd'hui je devrais avoir un peu plus de temps de dispo : )

anonyme · 31-01-2019 09:31:49

Bonjour

que donne

apt search nvidia | grep install

 

et la commande donne toujours des erreurs (en simulation) ?

apt-get -s install bumblebee-nvidia primus

 

ou avec aptitude

aptitude -s install bumblebee-nvidia primus

 

Dernière modification par anonyme (02-02-2019 16:32:31)

Lam3ch · 02-02-2019 09:35:49

Bien l'bonjour, encore désolé pour ce silence mais j'ai eu une semaine plutôt chargée !
Du coup voilà le retour des commandes :

apt search nvidia | grep installé

 

WARNING: apt does not have a stable CLI interface. Use with caution in scripts.

E: Vous devez fournir au moins un motif de recherche

apt-get -s install bumblebee-nvidia primus

 

Lecture des listes de paquets... Fait

Construction de l'arbre des dépendances       

Lecture des informations d'état... Fait

Certains paquets ne peuvent être installés. Ceci peut signifier

que vous avez demandé l'impossible, ou bien, si vous utilisez

la distribution unstable, que certains paquets n'ont pas encore           

été créés ou ne sont pas sortis d'Incoming.                                    

L'information suivante devrait vous aider à résoudre la situation :                  

Les paquets suivants contiennent des dépendances non satisfaites :                                   

 kde-runtime : Dépend: plasma-scriptengine-javascript (= 4:16.08.3-2) mais ne sera pas installé         

               Dépend: libkdewebkit5 (>= 4:4.9.95~) mais ne sera pas installé

               Dépend: libplasma3 (>= 4:4.9.95~) mais ne sera pas installé

               Dépend: libqtwebkit4 (>= 2.1.0~2011week13) mais ne sera pas installé

 kdelibs5-plugins : Dépend: libkdewebkit5 (= 4:4.14.26-2) mais ne sera pas--/ installé

 libgl1 : Dépend: libglx0 (= 1.1.0-1~bpo9+1) mais ne sera pas installé

 primus : Dépend: primus-libs (= 0~20150328-4) mais ne sera pas installé

          Recommande: primus-libs-ia32

E: Erreur, pkgProblem::Resolve a généré des ruptures, ce qui a pu être causé par les paquets devant être gardés en l'état.

et enfin la dernière (je n'ai pas aptitude d'installer du coup je vais l'installer) :

aptitude -s install bumblebee-nvidia primus

 

Les NOUVEAUX paquets suivants vont être installés :     

  bbswitch-dkms{a} bumblebee{a} bumblebee-nvidia glx-alternative-mesa{a} glx-alternative-nvidia{a} 

  glx-diversions{a} libbsd0:i386{a} libdrm-amdgpu1:i386{a} libdrm-intel1:i386{a} 

  libdrm-nouveau2:i386{a} libdrm-radeon1:i386{a} libdrm2:i386{a} libedit2:i386{a} libegl-mesa0{ab} 

  libegl-mesa0:i386{ab} libegl-nvidia0{a} libegl-nvidia0:i386{a} libegl1{ab} libegl1:i386{ab} 

  libelf1:i386{a} libexpat1:i386{a} libffi6:i386{a} libgcrypt20:i386{a} libgl1{ab} libgl1:i386{ab} 

  libgl1-mesa-dri:i386{a} libgl1-mesa-glx:i386{ab} libgl1-nvidia-glvnd-glx{a} 

  libgl1-nvidia-glvnd-glx:i386{a} libglapi-mesa:i386{a} libgles-nvidia1{a} libgles-nvidia1:i386{a} 

  libgles-nvidia2{a} libgles-nvidia2:i386{a} libgles1{a} libgles1:i386{a} libgles2:i386{a} 

  libglvnd0:i386{a} libglx-mesa0{ab} libglx-mesa0:i386{ab} libglx-nvidia0{a} libglx-nvidia0:i386{a} 

  libglx0{ab} libglx0:i386{ab} libgpg-error0:i386{a} libgpm2:i386{a} libllvm3.9:i386{a} 

  libncurses5:i386{a} libnvidia-cfg1{a} libnvidia-cfg1:i386{a} libnvidia-egl-wayland1{a} 

  libnvidia-egl-wayland1:i386{a} libnvidia-eglcore{a} libnvidia-eglcore:i386{a} libnvidia-glcore{a} 

  libnvidia-glcore:i386{a} libnvidia-ml1{a} libopengl0{a} libopengl0:i386{a} libpciaccess0:i386{a} 

  libsensors4:i386{a} libstdc++6:i386{a} libtxc-dxtn-s2tc:i386{a} libvulkan1{a} libvulkan1:i386{a} 

  libwayland-client0:i386{a} libwayland-server0:i386{a} libx11-6:i386{a} libx11-xcb1:i386{a} 

  libxau6:i386{a} libxcb-dri2-0:i386{a} libxcb-dri3-0:i386{a} libxcb-glx0:i386{a} 

  libxcb-present0:i386{a} libxcb-sync1:i386{a} libxcb-xfixes0:i386{a} libxcb1:i386{a} 

  libxdamage1:i386{a} libxdmcp6:i386{a} libxext6:i386{a} libxfixes3:i386{a} libxnvctrl0{a} 

  libxshmfence1:i386{a} libxxf86vm1:i386{a} nvidia-alternative{a} nvidia-driver{a} 

  nvidia-driver-bin{a} nvidia-driver-libs{a} nvidia-driver-libs:i386{a} 

  nvidia-driver-libs-i386:i386{a} nvidia-egl-common{a} nvidia-egl-icd{a} nvidia-egl-icd:i386{a} 

  nvidia-egl-wayland-common{a} nvidia-egl-wayland-icd{a} nvidia-egl-wayland-icd:i386{a} 

  nvidia-installer-cleanup{a} nvidia-kernel-common{a} nvidia-kernel-dkms{a} nvidia-kernel-support{a} 

  nvidia-legacy-check{a} nvidia-modprobe{a} nvidia-persistenced{a} nvidia-settings{a} 

  nvidia-support{a} nvidia-vdpau-driver{a} nvidia-vulkan-common{a} nvidia-vulkan-icd{a} 

  nvidia-vulkan-icd:i386{a} primus primus-libs{a} primus-libs:i386{a} primus-libs-ia32:i386{a} 

  update-glx{a} xserver-xorg-video-nvidia{a} 

0 paquets mis à jour, 115 nouvellement installés, 0 à enlever et 0 non mis à jour.

Il est nécessaire de télécharger 28,9 Mo/71,2 Mo d'archives. Après dépaquetage, 384 Mo seront utilisés.

Les paquets suivants ont des dépendances non satisfaites :

 libegl1 : Casse: libegl1-mesa (< 17.2.0~rc4-1) but 13.0.6-1+b2 is installed

 libegl1:i386 : Casse: libegl1-mesa (< 17.2.0~rc4-1) but 13.0.6-1+b2 is installed

 libegl-mesa0 : Dépend: libdrm2 (>= 2.4.75) but 2.4.74-1 is installed

                Dépend: libgbm1 (= 18.2.8-2~bpo9+1) but 13.0.6-1+b2 is installed

                Dépend: libwayland-client0 (>= 1.15.0) but 1.12.0-1 is installed

                Dépend: libwayland-server0 (>= 1.15.0) but 1.12.0-1 is installed

 libegl-mesa0:i386 : Dépend: libdrm2:i386 (>= 2.4.75) but 2.4.74-1 is to be installed

                     Dépend: libgbm1:i386 (= 18.2.8-2~bpo9+1) but it is not going to be installed

                     Dépend: libwayland-client0:i386 (>= 1.15.0) but 1.12.0-1 is to be installed

                     Dépend: libwayland-server0:i386 (>= 1.15.0) but 1.12.0-1 is to be installed

 libgl1 : Casse: libgl1-mesa-glx (< 17.2.0~rc4-1) but 13.0.6-1+b2 is installed

          Casse: libgl1-mesa-glx:i386 (< 17.2.0~rc4-1) but 13.0.6-1+b2 is to be installed

 libgl1:i386 : Casse: libgl1-mesa-glx (< 17.2.0~rc4-1) but 13.0.6-1+b2 is installed

               Casse: libgl1-mesa-glx:i386 (< 17.2.0~rc4-1) but 13.0.6-1+b2 is to be installed

 libglx0 : Casse: libgl1-mesa-glx (< 17.2.0~rc4-1) but 13.0.6-1+b2 is installed

           Casse: libgl1-mesa-glx:i386 (< 17.2.0~rc4-1) but 13.0.6-1+b2 is to be installed

 libglx0:i386 : Casse: libgl1-mesa-glx (< 17.2.0~rc4-1) but 13.0.6-1+b2 is installed

                Casse: libgl1-mesa-glx:i386 (< 17.2.0~rc4-1) but 13.0.6-1+b2 is to be installed

 libgl1-mesa-glx : Est en conflit avec: libgl1 but 1.1.0-1~bpo9+1 is to be installed

                   Est en conflit avec: libgl1:i386 but 1.1.0-1~bpo9+1 is to be installed

 libgl1-mesa-glx:i386 : Est en conflit avec: libgl1 but 1.1.0-1~bpo9+1 is to be installed

                        Est en conflit avec: libgl1:i386 but 1.1.0-1~bpo9+1 is to be installed

 libglx-mesa0 : Dépend: libdrm2 (>= 2.4.75) but 2.4.74-1 is installed

                Dépend: libglapi-mesa (= 18.2.8-2~bpo9+1) but 13.0.6-1+b2 is installed

                Casse: glx-diversions (< 0.8.4~) but 0.8.3~deb9u1 is to be installed

                Casse: glx-diversions:i386 (< 0.8.4~) but it is not going to be installed

 libglx-mesa0:i386 : Dépend: libdrm2:i386 (>= 2.4.75) but 2.4.74-1 is to be installed

                     Dépend: libglapi-mesa:i386 (= 18.2.8-2~bpo9+1) but 13.0.6-1+b2 is to be installed

                     Casse: glx-diversions (< 0.8.4~) but 0.8.3~deb9u1 is to be installed

                     Casse: glx-diversions:i386 (< 0.8.4~) but it is not going to be installed

Les actions suivantes permettront de résoudre ces dépendances :

      Conserver les paquets suivants dans leur version actuelle :                       

1)      libegl-mesa0 [Non installé]                                                     

2)      libegl-mesa0:i386 [Non installé]                                                

3)      libegl1 [Non installé]                                                          

4)      libegl1:i386 [Non installé]                                                     

5)      libgl1 [Non installé]                                                           

6)      libgl1:i386 [Non installé]                                                      

7)      libgl1-nvidia-glvnd-glx [Non installé]                                          

8)      libgl1-nvidia-glvnd-glx:i386 [Non installé]                                     

9)      libglx-mesa0 [Non installé]                                                     

10)     libglx-mesa0:i386 [Non installé]                                                

11)     libglx-nvidia0 [Non installé]                                                   

12)     libglx-nvidia0:i386 [Non installé]                                              

13)     libglx0 [Non installé]                                                          

14)     libglx0:i386 [Non installé]                                                     

15)     nvidia-driver [Non installé]                                                    

16)     nvidia-driver-libs [Non installé]                                               

17)     nvidia-driver-libs:i386 [Non installé]                                          

18)     nvidia-driver-libs-i386:i386 [Non installé]                                     

19)     nvidia-egl-icd [Non installé]                                                   

20)     nvidia-egl-icd:i386 [Non installé]                                              

21)     nvidia-vulkan-icd [Non installé]                                                

22)     nvidia-vulkan-icd:i386 [Non installé]                                           

      Leave the following dependencies unresolved:                                      

23)     nvidia-settings recommande libgl1-nvidia-glvnd-glx | libgl1-nvidia-glx          

24)     nvidia-driver-bin recommande nvidia-driver                                      

25)     nvidia-kernel-dkms recommande nvidia-driver (>= 384.130) | libcuda1 (>= 384.130)

26)     nvidia-vulkan-common recommande nvidia-vulkan-icd                               

27)     xserver-xorg-video-nvidia recommande nvidia-driver (>= 384.130)                 

Accepter cette solution ? [Y/n/q/?] Y

Les NOUVEAUX paquets suivants vont être installés : 

  bbswitch-dkms{a} bumblebee{a} bumblebee-nvidia glx-alternative-mesa{a} glx-alternative-nvidia{a} 

  glx-diversions{a} libbsd0:i386{a} libdrm-amdgpu1:i386{a} libdrm-intel1:i386{a} 

  libdrm-nouveau2:i386{a} libdrm-radeon1:i386{a} libdrm2:i386{a} libedit2:i386{a} libelf1:i386{a} 

  libexpat1:i386{a} libffi6:i386{a} libgcrypt20:i386{a} libgl1-mesa-dri:i386{a} 

  libgl1-mesa-glx:i386{a} libglapi-mesa:i386{a} libgpg-error0:i386{a} libgpm2:i386{a} 

  libllvm3.9:i386{a} libncurses5:i386{a} libnvidia-glcore{a} libnvidia-ml1{a} libpciaccess0:i386{a} 

  libsensors4:i386{a} libstdc++6:i386{a} libtxc-dxtn-s2tc:i386{a} libx11-6:i386{a} 

  libx11-xcb1:i386{a} libxau6:i386{a} libxcb-dri2-0:i386{a} libxcb-dri3-0:i386{a} 

  libxcb-glx0:i386{a} libxcb-present0:i386{a} libxcb-sync1:i386{a} libxcb1:i386{a} 

  libxdamage1:i386{a} libxdmcp6:i386{a} libxext6:i386{a} libxfixes3:i386{a} libxnvctrl0{a} 

  libxshmfence1:i386{a} libxxf86vm1:i386{a} nvidia-alternative{a} nvidia-installer-cleanup{a} 

  nvidia-kernel-common{a} nvidia-kernel-dkms{a} nvidia-kernel-support{a} nvidia-legacy-check{a} 

  nvidia-modprobe{a} nvidia-settings{a} nvidia-support{a} nvidia-vdpau-driver{a} primus 

  primus-libs{a} primus-libs:i386{a} primus-libs-ia32:i386{a} update-glx{a} 

  xserver-xorg-video-nvidia{a} 

Les paquets suivants sont RECOMMANDÉS mais ne seront pas installés :

  libcuda1 libgl1-nvidia-glvnd-glx libgl1-nvidia-glx nvidia-driver 

0 paquets mis à jour, 62 nouvellement installés, 0 à enlever et 0 non mis à jour.

Il est nécessaire de télécharger 0 o/42,3 Mo d'archives. Après dépaquetage, 272 Mo seront utilisés.

Note: Using 'Simulate' mode.

Voulez-vous continuer ? [Y/n/?] Y

Charger/installer/enlever des paquets.

smolski · 02-02-2019 10:03:52

apt search nvidia | grep installé

Le é d'install est faux.
La bonne commande qui peut être faite en user :

apt search nvidia | grep install

TechDesk · 02-02-2019 10:30:26

ça va t'as pas trop peiné à trouver l'erreur ?

:P

smolski · 02-02-2019 12:38:20

blblblbl...

anonyme · 02-02-2019 12:55:27

Bonjour
ça change rien , il y a toujours un souci et sur plusieurs membres qui font la demande.
je fais confiance au nettoyage des paquets nvidia
les "grep" pas trop mon truc
avec synaptic en 2 minutes c'est fait pour purger un driver
et en console pure un remove puissant

et le tour est joué.
au départ la debian est pas propre , nombreuses tentatives avec parfois plusieurs wiki.
sur mes PC de bureau une installation de bumblebee en simulation ne donne pas ce genre de retour avec un driver nvidia déjà installé , il y a autres choses que des paquets nvidia
sûrement des problèmes de version ou quelque chose qui devrait pas être installé.
sans parler parfois de sources.list exotiques

il y a le même souci ici => https://debian-facile.org/viewtopic.php … 72#p291472

Dernière modification par anonyme (02-02-2019 12:58:05)

Lam3ch · 02-02-2019 13:02:25

oui pour install j'ai fait un copié collé mais la commande avait été corrigé. Du coup j'en déduis que je dois mal faire les choses?

chalu · 02-02-2019 13:24:23

Bonjour,
Il n’y aurait pas un problème de sources.list ?

post #130 a écrit :

Les paquets suivants contiennent des dépendances non satisfaites :
kde-runtime : Dépend: plasma-scriptengine-javascript (= 4:16.08.3-2) mais ne sera pas installé
Dépend: libkdewebkit5 (>= 4:4.9.95~) mais ne sera pas installé
Dépend: libplasma3 (>= 4:4.9.95~) mais ne sera pas installé
Dépend: libqtwebkit4 (>= 2.1.0~2011week13) mais ne sera pas installé

cat /etc/apt/sources.list

ls /etc/apt/sources.list.d

Lam3ch · 02-02-2019 13:46:40

cat /etc/apt/sources.list

deb http://security.debian.org/debian-security stretch/updates main contrib non-free

deb http://deb.debian.org/debian/ stretch-updates main contrib non-free

deb http://deb.debian.org/debian/ stretch main contrib non-free

deb http://deb.debian.org/debian/ stretch-backports main contrib non-free

ls /etc/apt/sources.list.d

ne renvoi rien

anonyme · 02-02-2019 13:48:21

@chalu
c'est noté sur le #134
la première chose que je fais c'est donné le sources.list a utiliser.
il faut pas longtemps pour une installation de debian
installer Buster
mettre a jour le souces.list
installer les firmwares
installer bumblebee-nvidia
vérifier le fonctionnement

mais ça c'est dans un monde idéal

Dernière modification par anonyme (02-02-2019 13:48:51)

anonyme · 02-02-2019 13:56:11

@Lam3ch

je sais que c'est correct cette nuit j'ai parcouru les fils , c'est justement ce qui me dérange.
je pense que de faire 6 pages sur le sujet une installation neuve avec si possible buster qui pose moins de problème on risque de gagner du temps
je sais pas ce que tu en pense ?

ps: pour un éventuel souci d' écran noir ou autres ça se gère assez facilement au premier démarrage.

un qui a choisi de passer a buster installation neuve => https://debian-facile.org/viewtopic.php … 25#p291425
pas de retour pour l'instant

remarque : bientôt les portables vont être soit en intel + vega , soit en AMD et APU vega
j'ai trouvé quelques demandes sur le net.
les second pas besoin de bumblebee (les premiers je sais pas)

Dernière modification par anonyme (02-02-2019 14:04:30)

Lam3ch · 02-02-2019 14:21:15

Ouais donc tu me conseil de dl une buster et de partir la dessus du coup ?

anonyme · 02-02-2019 14:29:51

Tu veut utiliser gnome , fais une installation minimale de stretch (sans bureau)
installation des firmwares
dist-upgrade vers buster
installation du bureau
installation de bumblebee

si trop compliqué pour toi partir directement sur un DVD1 de buster mais il faudra installer rapidement le firmware "firmware-misc-nonfree" pour le gpu intel

Lam3ch · 02-02-2019 14:41:33

non je pense lacher gnome pour KDE/plasmsa-

chalu · 02-02-2019 15:02:37

Il y a quand même des paquets d’origine inconnue qui gênent pour avoir eu ce message d’erreur non ?

anonyme · 02-02-2019 15:15:01

cette nuit dans ma dépression j'ai testé KDE Plasma sur PCLinuxOS , beau bureau (sur un vieux opteron et une carte graphique nvidia)
un peu de soucis au départ , rpm , apt ne fonctionne pas (uniquement apt-get) , nonfree inclu a l'installation.
configuration pour moi un peu difficile mais le résultat est pas mal du tout.
Après tout est question d' habitude, ça fait 5 ans environ que je suis sous debian

@chalu

Lam3ch · 02-02-2019 15:24:15

Il dit qu'il est perdu

anonyme · 02-02-2019 15:31:09

donne moi le retour de cette commande (un peu long a mettre avec les balises codes)

cat /var/log/Xorg.0.log

 

ps : avec lightdm , avec gdm3 ce log est ailleurs . (/home/usr/.local/share/xorg/Xorg.0.log de mémoire )

Lam3ch · 02-02-2019 15:36:40

cat /var/log/Xorg.0.log

[    91.456] 

X.Org X Server 1.19.2

Release Date: 2017-03-02

[    91.456] X Protocol Version 11, Revision 0

[    91.456] Build Operating System: Linux 4.9.0-8-amd64 x86_64 Debian

[    91.456] Current Operating System: Linux debian 4.9.0-8-amd64 #1 SMP Debian 4.9.130-2 (2018-10-27) x86_64

[    91.456] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-8-amd64 root=UUID=bbff43bc-84eb-4fa4-b32e-2c2a7448983c ro quiet

[    91.456] Build Date: 03 November 2018  03:09:11AM

[    91.456] xorg-server 2:1.19.2-1+deb9u5 (https://www.debian.org/support) 

[    91.456] Current version of pixman: 0.34.0

[    91.456]    Before reporting problems, check http://wiki.x.org

        to make sure that you have the latest version.

[    91.456] Markers: (--) probed, (**) from config file, (==) default setting,

        (++) from command line, (!!) notice, (II) informational,

        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.

[    91.456] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Feb  2 09:24:35 2019

[    91.456] (==) Using system config directory "/usr/share/X11/xorg.conf.d"

[    91.456] (==) No Layout section.  Using the first Screen section.

[    91.456] (==) No screen section available. Using defaults.

[    91.456] (**) |-->Screen "Default Screen Section" (0)

[    91.456] (**) |   |-->Monitor "<default monitor>"

[    91.456] (==) No monitor specified for screen "Default Screen Section".

        Using a default monitor configuration.

[    91.456] (==) Automatically adding devices

[    91.456] (==) Automatically enabling devices

[    91.456] (==) Automatically adding GPU devices

[    91.456] (==) Max clients allowed: 256, resource mask: 0x1fffff

[    91.456] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.

[    91.456]    Entry deleted from font path.

[    91.456] (==) FontPath set to:

        /usr/share/fonts/X11/misc,

        /usr/share/fonts/X11/100dpi/:unscaled,

        /usr/share/fonts/X11/75dpi/:unscaled,

        /usr/share/fonts/X11/Type1,

        /usr/share/fonts/X11/100dpi,

        /usr/share/fonts/X11/75dpi,

        built-ins

[    91.456] (==) ModulePath set to "/usr/lib/xorg/modules"

[    91.456] (II) The server relies on udev to provide the list of input devices.

        If no devices become available, reconfigure udev or disable AutoAddDevices.

[    91.456] (II) Loader magic: 0x55f722a51e00

[    91.456] (II) Module ABI versions:

[    91.456]    X.Org ANSI C Emulation: 0.4

[    91.456]    X.Org Video Driver: 23.0

[    91.456]    X.Org XInput driver : 24.1

[    91.456]    X.Org Server Extension : 10.0

[    91.457] (++) using VT number 7

[    91.457] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration

[    91.458] (II) xfree86: Adding drm device (/dev/dri/card0)

[    91.471] (--) PCI:*(0:0:2:0) 8086:591b:1462:11c8 rev 4, Mem @ 0xdd000000/16777216, 0xb0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072

[    91.471] (--) PCI: (0:1:0:0) 10de:1c8d:1462:11c8 rev 161, Mem @ 0xde000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288

[    91.471] (II) LoadModule: "glx"

[    91.471] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so

[    91.473] (II) Module glx: vendor="X.Org Foundation"

[    91.473]    compiled for 1.19.2, module version = 1.0.0

[    91.473]    ABI class: X.Org Server Extension, version 10.0

[    91.473] (==) Matched modesetting as autoconfigured driver 0

[    91.473] (==) Matched fbdev as autoconfigured driver 1

[    91.473] (==) Matched vesa as autoconfigured driver 2

[    91.474] (==) Assigned the driver to the xf86ConfigLayout

[    91.474] (II) LoadModule: "modesetting"

[    91.474] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so

[    91.474] (II) Module modesetting: vendor="X.Org Foundation"

[    91.474]    compiled for 1.19.2, module version = 1.19.2

[    91.474]    Module class: X.Org Video Driver

[    91.474]    ABI class: X.Org Video Driver, version 23.0

[    91.474] (II) LoadModule: "fbdev"

[    91.474] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so

[    91.474] (II) Module fbdev: vendor="X.Org Foundation"

[    91.474]    compiled for 1.19.0, module version = 0.4.4

[    91.474]    Module class: X.Org Video Driver

[    91.474]    ABI class: X.Org Video Driver, version 23.0

[    91.474] (II) LoadModule: "vesa"

[    91.474] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so

[    91.474] (II) Module vesa: vendor="X.Org Foundation"

[    91.474]    compiled for 1.19.0, module version = 2.3.4

[    91.474]    Module class: X.Org Video Driver

[    91.474]    ABI class: X.Org Video Driver, version 23.0

[    91.474] (II) modesetting: Driver for Modesetting Kernel Drivers: kms

[    91.474] (II) FBDEV: driver for framebuffer: fbdev

[    91.474] (II) VESA: driver for VESA chipsets: vesa

[    91.485] (II) modeset(0): using drv /dev/dri/card0

[    91.485] (WW) Falling back to old probe method for fbdev

[    91.485] (II) Loading sub module "fbdevhw"

[    91.485] (II) LoadModule: "fbdevhw"

[    91.486] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so

[    91.486] (II) Module fbdevhw: vendor="X.Org Foundation"

[    91.486]    compiled for 1.19.2, module version = 0.0.2

[    91.486]    ABI class: X.Org Video Driver, version 23.0

[    91.486] (WW) Falling back to old probe method for vesa

[    91.486] (II) modeset(0): Creating default Display subsection in Screen section

        "Default Screen Section" for depth/fbbpp 24/32

[    91.486] (==) modeset(0): Depth 24, (==) framebuffer bpp 32

[    91.486] (==) modeset(0): RGB weight 888

[    91.486] (==) modeset(0): Default visual is TrueColor

[    91.486] (II) Loading sub module "glamoregl"

[    91.486] (II) LoadModule: "glamoregl"

[    91.486] (II) Loading /usr/lib/xorg/modules/libglamoregl.so

[    91.488] (II) Module glamoregl: vendor="X.Org Foundation"

[    91.488]    compiled for 1.19.2, module version = 1.0.0

[    91.488]    ABI class: X.Org ANSI C Emulation, version 0.4

[    91.489] (II) glamor: OpenGL accelerated X.org driver based.

[    91.496] (II) glamor: EGL version 1.4 (DRI2):

[    91.497] (II) modeset(0): glamor initialized

[    91.497] (II) modeset(0): Output eDP-1 has no monitor section

[    91.500] (II) modeset(0): Output DP-1 has no monitor section

[    91.504] (II) modeset(0): Output HDMI-1 has no monitor section

[    91.510] (II) modeset(0): Output HDMI-2 has no monitor section

[    91.510] (II) modeset(0): EDID for output eDP-1

[    91.510] (II) modeset(0): Manufacturer: CMN  Model: 15d6  Serial#: 0

[    91.510] (II) modeset(0): Year: 2015  Week: 38

[    91.510] (II) modeset(0): EDID Version: 1.4

[    91.510] (II) modeset(0): Digital Display Input

[    91.510] (II) modeset(0): 6 bits per channel

[    91.510] (II) modeset(0): Digital interface is DisplayPort

[    91.510] (II) modeset(0): Max Image Size [cm]: horiz.: 34  vert.: 19

[    91.510] (II) modeset(0): Gamma: 2.20

[    91.510] (II) modeset(0): No DPMS capabilities specified

[    91.510] (II) modeset(0): Supported color encodings: RGB 4:4:4 

[    91.510] (II) modeset(0): First detailed timing is preferred mode

[    91.510] (II) modeset(0): Preferred mode is native pixel format and refresh rate

[    91.510] (II) modeset(0): redX: 0.673 redY: 0.309   greenX: 0.266 greenY: 0.674

[    91.510] (II) modeset(0): blueX: 0.156 blueY: 0.047   whiteX: 0.313 whiteY: 0.329

[    91.510] (II) modeset(0): Manufacturer's mask: 0

[    91.510] (II) modeset(0): Supported detailed timing:

[    91.510] (II) modeset(0): clock: 152.8 MHz   Image Size:  344 x 193 mm

[    91.510] (II) modeset(0): h_active: 1920  h_sync: 1964  h_sync_end 1992 h_blank_end 2250 h_border: 0

[    91.510] (II) modeset(0): v_active: 1080  v_sync: 1082  v_sync_end 1086 v_blanking: 1132 v_border: 0

[    91.510] (II) modeset(0):  N156HGA-EAL

[    91.510] (II) modeset(0):  CMN

[    91.510] (II) modeset(0):  N156HGA-EAL

[    91.510] (II) modeset(0): EDID (in hex):

[    91.510] (II) modeset(0):   00ffffffffffff000daed61500000000

[    91.510] (II) modeset(0):   2619010495221378024205ac4f44ac28

[    91.510] (II) modeset(0):   0c505400000001010101010101010101

[    91.510] (II) modeset(0):   010101010101b43b804a713834402c1c

[    91.510] (II) modeset(0):   240058c110000018000000fe004e3135

[    91.510] (II) modeset(0):   364847412d45414c0a20000000fe0043

[    91.510] (II) modeset(0):   4d4e0a202020202020202020000000fe

[    91.510] (II) modeset(0):   004e3135364847412d45414c0a200073

[    91.510] (II) modeset(0): Printing probed modes for output eDP-1

[    91.510] (II) modeset(0): Modeline "1920x1080"x60.0  152.84  1920 1964 1992 2250  1080 1082 1086 1132 -hsync -vsync (67.9 kHz eP)

[    91.510] (II) modeset(0): Modeline "1920x1080"x59.9  138.50  1920 1968 2000 2080  1080 1083 1088 1111 +hsync -vsync (66.6 kHz d)

[    91.510] (II) modeset(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz d)

[    91.510] (II) modeset(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz d)

[    91.510] (II) modeset(0): Modeline "1600x1024"x60.2  103.12  1600 1600 1656 1664  1024 1024 1029 1030 +hsync +vsync (62.0 kHz d)

[    91.510] (II) modeset(0): Modeline "1400x1050"x60.0  122.00  1400 1488 1640 1880  1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)

[    91.510] (II) modeset(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)

[    91.510] (II) modeset(0): Modeline "1440x900"x59.9  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz d)

[    91.510] (II) modeset(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz d)

[    91.510] (II) modeset(0): Modeline "1360x768"x59.8   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsync (47.7 kHz d)

[    91.510] (II) modeset(0): Modeline "1360x768"x60.0   72.00  1360 1408 1440 1520  768 771 781 790 +hsync -vsync (47.4 kHz d)

[    91.510] (II) modeset(0): Modeline "1152x864"x60.0   81.62  1152 1216 1336 1520  864 865 868 895 -hsync +vsync (53.7 kHz d)

[    91.510] (II) modeset(0): Modeline "1024x768"x120.1  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)

[    91.510] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)

[    91.510] (II) modeset(0): Modeline "960x720"x120.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)

[    91.510] (II) modeset(0): Modeline "928x696"x120.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)

[    91.510] (II) modeset(0): Modeline "896x672"x120.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)

[    91.510] (II) modeset(0): Modeline "960x600"x120.0   77.00  960 984 1000 1040  600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)

[    91.510] (II) modeset(0): Modeline "960x540"x120.0   69.25  960 984 1000 1040  540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)

[    91.510] (II) modeset(0): Modeline "800x600"x120.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)

[    91.510] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)

[    91.510] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)

[    91.510] (II) modeset(0): Modeline "840x525"x120.0   73.12  840 892 980 1120  525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)

[    91.510] (II) modeset(0): Modeline "840x525"x119.8   59.50  840 864 880 920  525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)

[    91.510] (II) modeset(0): Modeline "800x512"x120.3   51.56  800 800 828 832  512 512 514 515 doublescan +hsync +vsync (62.0 kHz d)

[    91.511] (II) modeset(0): Modeline "700x525"x120.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)

[    91.511] (II) modeset(0): Modeline "640x512"x120.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)

[    91.511] (II) modeset(0): Modeline "720x450"x119.8   53.25  720 760 836 952  450 451 454 467 doublescan -hsync +vsync (55.9 kHz d)

[    91.511] (II) modeset(0): Modeline "640x480"x120.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)

[    91.511] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)

[    91.511] (II) modeset(0): Modeline "680x384"x119.6   42.38  680 716 784 888  384 385 390 399 doublescan -hsync +vsync (47.7 kHz d)

[    91.511] (II) modeset(0): Modeline "680x384"x119.9   36.00  680 704 720 760  384 385 390 395 doublescan +hsync -vsync (47.4 kHz d)

[    91.511] (II) modeset(0): Modeline "576x432"x120.1   40.81  576 608 668 760  432 432 434 447 doublescan -hsync +vsync (53.7 kHz d)

[    91.511] (II) modeset(0): Modeline "512x384"x120.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)

[    91.511] (II) modeset(0): Modeline "400x300"x120.6   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)

[    91.511] (II) modeset(0): Modeline "400x300"x112.7   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)

[    91.511] (II) modeset(0): Modeline "320x240"x120.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)

[    91.513] (II) modeset(0): EDID for output DP-1

[    91.517] (II) modeset(0): EDID for output HDMI-1

[    91.522] (II) modeset(0): EDID for output HDMI-2

[    91.522] (II) modeset(0): Output eDP-1 connected

[    91.522] (II) modeset(0): Output DP-1 disconnected

[    91.522] (II) modeset(0): Output HDMI-1 disconnected

[    91.522] (II) modeset(0): Output HDMI-2 disconnected

[    91.522] (II) modeset(0): Using exact sizes for initial modes

[    91.522] (II) modeset(0): Output eDP-1 using initial mode 1920x1080 +0+0

[    91.522] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)

[    91.522] (==) modeset(0): DPI set to (96, 96)

[    91.522] (II) Loading sub module "fb"

[    91.522] (II) LoadModule: "fb"

[    91.523] (II) Loading /usr/lib/xorg/modules/libfb.so

[    91.523] (II) Module fb: vendor="X.Org Foundation"

[    91.523]    compiled for 1.19.2, module version = 1.0.0

[    91.523]    ABI class: X.Org ANSI C Emulation, version 0.4

[    91.523] (II) UnloadModule: "fbdev"

[    91.523] (II) Unloading fbdev

[    91.523] (II) UnloadSubModule: "fbdevhw"

[    91.523] (II) Unloading fbdevhw

[    91.523] (II) UnloadModule: "vesa"

[    91.523] (II) Unloading vesa

[    91.523] (==) Depth 24 pixmap format is 32 bpp

[    91.581] (==) modeset(0): Backing store enabled

[    91.581] (==) modeset(0): Silken mouse enabled

[    91.581] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.

[    91.582] (==) modeset(0): DPMS enabled

[    91.582] (II) modeset(0): [DRI2] Setup complete

[    91.582] (II) modeset(0): [DRI2]   DRI driver: i965

[    91.582] (II) modeset(0): [DRI2]   VDPAU driver: i965

[    91.582] (--) RandR disabled

[    91.583] (II) SELinux: Disabled on system

[    91.586] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer

[    91.586] (II) AIGLX: enabled GLX_ARB_create_context

[    91.586] (II) AIGLX: enabled GLX_ARB_create_context_profile

[    91.586] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile

[    91.586] (II) AIGLX: enabled GLX_INTEL_swap_event

[    91.586] (II) AIGLX: enabled GLX_SGI_swap_control

[    91.586] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB

[    91.586] (II) AIGLX: enabled GLX_ARB_fbconfig_float

[    91.586] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float

[    91.586] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects

[    91.586] (II) AIGLX: enabled GLX_ARB_create_context_robustness

[    91.586] (II) AIGLX: Loaded and initialized i965

[    91.586] (II) GLX: Initialized DRI2 GL provider for screen 0

[    91.588] (II) modeset(0): Damage tracking initialized

[    91.588] (II) modeset(0): Setting screen physical size to 508 x 285

[    91.609] (II) config/udev: Adding input device Power Button (/dev/input/event5)

[    91.609] (**) Power Button: Applying InputClass "libinput keyboard catchall"

[    91.609] (II) LoadModule: "libinput"

[    91.609] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so

[    91.610] (II) Module libinput: vendor="X.Org Foundation"

[    91.610]    compiled for 1.19.0, module version = 0.23.0

[    91.610]    Module class: X.Org XInput Driver

[    91.610]    ABI class: X.Org XInput driver, version 24.1

[    91.610] (II) Using input driver 'libinput' for 'Power Button'

[    91.610] (**) Power Button: always reports core events

[    91.610] (**) Option "Device" "/dev/input/event5"

[    91.610] (**) Option "_source" "server/udev"

[    91.610] (II) input device 'Power Button', /dev/input/event5 is tagged by udev as: Keyboard

[    91.610] (II) input device 'Power Button', /dev/input/event5 is a keyboard

[    91.636] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event5"

[    91.636] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)

[    91.636] (**) Option "xkb_model" "pc105"

[    91.636] (**) Option "xkb_layout" "fr"

[    91.636] (**) Option "xkb_variant" "latin9"

[    91.647] (II) input device 'Power Button', /dev/input/event5 is tagged by udev as: Keyboard

[    91.647] (II) input device 'Power Button', /dev/input/event5 is a keyboard

[    91.647] (II) config/udev: Adding input device Video Bus (/dev/input/event8)

[    91.647] (**) Video Bus: Applying InputClass "libinput keyboard catchall"

[    91.647] (II) Using input driver 'libinput' for 'Video Bus'

[    91.647] (**) Video Bus: always reports core events

[    91.647] (**) Option "Device" "/dev/input/event8"

[    91.647] (**) Option "_source" "server/udev"

[    91.647] (II) input device 'Video Bus', /dev/input/event8 is tagged by udev as: Keyboard

[    91.647] (II) input device 'Video Bus', /dev/input/event8 is a keyboard

[    91.664] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9/event8"

[    91.664] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)

[    91.664] (**) Option "xkb_model" "pc105"

[    91.664] (**) Option "xkb_layout" "fr"

[    91.664] (**) Option "xkb_variant" "latin9"

[    91.664] (II) input device 'Video Bus', /dev/input/event8 is tagged by udev as: Keyboard

[    91.664] (II) input device 'Video Bus', /dev/input/event8 is a keyboard

[    91.665] (II) config/udev: Adding input device Video Bus (/dev/input/event9)

[    91.665] (**) Video Bus: Applying InputClass "libinput keyboard catchall"

[    91.665] (II) Using input driver 'libinput' for 'Video Bus'

[    91.665] (**) Video Bus: always reports core events

[    91.665] (**) Option "Device" "/dev/input/event9"

[    91.665] (**) Option "_source" "server/udev"

[    91.665] (II) input device 'Video Bus', /dev/input/event9 is tagged by udev as: Keyboard

[    91.665] (II) input device 'Video Bus', /dev/input/event9 is a keyboard

[    91.680] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:12/LNXVIDEO:01/input/input10/event9"

[    91.680] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)

[    91.680] (**) Option "xkb_model" "pc105"

[    91.680] (**) Option "xkb_layout" "fr"

[    91.680] (**) Option "xkb_variant" "latin9"

[    91.681] (II) input device 'Video Bus', /dev/input/event9 is tagged by udev as: Keyboard

[    91.681] (II) input device 'Video Bus', /dev/input/event9 is a keyboard

[    91.682] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)

[    91.682] (II) No input driver specified, ignoring this device.

[    91.682] (II) This device may have been added with another device file.

[    91.682] (II) config/udev: Adding input device Power Button (/dev/input/event4)

[    91.683] (**) Power Button: Applying InputClass "libinput keyboard catchall"

[    91.683] (II) Using input driver 'libinput' for 'Power Button'

[    91.683] (**) Power Button: always reports core events

[    91.683] (**) Option "Device" "/dev/input/event4"

[    91.683] (**) Option "_source" "server/udev"

[    91.683] (II) input device 'Power Button', /dev/input/event4 is tagged by udev as: Keyboard

[    91.683] (II) input device 'Power Button', /dev/input/event4 is a keyboard

[    91.696] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5/event4"

[    91.696] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)

[    91.696] (**) Option "xkb_model" "pc105"

[    91.696] (**) Option "xkb_layout" "fr"

[    91.696] (**) Option "xkb_variant" "latin9"

[    91.697] (II) input device 'Power Button', /dev/input/event4 is tagged by udev as: Keyboard

[    91.697] (II) input device 'Power Button', /dev/input/event4 is a keyboard

[    91.698] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)

[    91.698] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"

[    91.698] (II) Using input driver 'libinput' for 'Sleep Button'

[    91.698] (**) Sleep Button: always reports core events

[    91.698] (**) Option "Device" "/dev/input/event3"

[    91.698] (**) Option "_source" "server/udev"

[    91.698] (II) input device 'Sleep Button', /dev/input/event3 is tagged by udev as: Keyboard

[    91.698] (II) input device 'Sleep Button', /dev/input/event3 is a keyboard

[    91.712] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4/event3"

[    91.712] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)

[    91.712] (**) Option "xkb_model" "pc105"

[    91.712] (**) Option "xkb_layout" "fr"

[    91.712] (**) Option "xkb_variant" "latin9"

[    91.713] (II) input device 'Sleep Button', /dev/input/event3 is tagged by udev as: Keyboard

[    91.713] (II) input device 'Sleep Button', /dev/input/event3 is a keyboard

[    91.714] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event10)

[    91.714] (II) No input driver specified, ignoring this device.

[    91.714] (II) This device may have been added with another device file.

[    91.715] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event11)

[    91.715] (II) No input driver specified, ignoring this device.

[    91.715] (II) This device may have been added with another device file.

[    91.715] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event12)

[    91.715] (II) No input driver specified, ignoring this device.

[    91.715] (II) This device may have been added with another device file.

[    91.716] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event13)

[    91.716] (II) No input driver specified, ignoring this device.

[    91.716] (II) This device may have been added with another device file.

[    91.717] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event14)

[    91.717] (II) No input driver specified, ignoring this device.

[    91.717] (II) This device may have been added with another device file.

[    91.717] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)

[    91.717] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"

[    91.717] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'

[    91.717] (**) AT Translated Set 2 keyboard: always reports core events

[    91.717] (**) Option "Device" "/dev/input/event0"

[    91.717] (**) Option "_source" "server/udev"

[    91.718] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard

[    91.718] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard

[    91.752] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"

[    91.752] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)

[    91.752] (**) Option "xkb_model" "pc105"

[    91.752] (**) Option "xkb_layout" "fr"

[    91.752] (**) Option "xkb_variant" "latin9"

[    91.753] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard

[    91.753] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard

[    91.754] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event1)

[    91.754] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"

[    91.754] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad'

[    91.754] (**) SynPS/2 Synaptics TouchPad: always reports core events

[    91.754] (**) Option "Device" "/dev/input/event1"

[    91.754] (**) Option "_source" "server/udev"

[    91.755] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event1 is tagged by udev as: Touchpad

[    91.755] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event1 is a touchpad

[    91.784] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input2/event1"

[    91.784] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)

[    91.784] (**) Option "AccelerationScheme" "none"

[    91.784] (**) SynPS/2 Synaptics TouchPad: (accel) selected scheme none/0

[    91.784] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000

[    91.784] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4

[    91.785] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event1 is tagged by udev as: Touchpad

[    91.785] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event1 is a touchpad

[    91.786] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)

[    91.786] (II) No input driver specified, ignoring this device.

[    91.786] (II) This device may have been added with another device file.

[    91.786] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)

[    91.787] (II) No input driver specified, ignoring this device.

[    91.787] (II) This device may have been added with another device file.

[    91.787] (II) config/udev: Adding input device MSI WMI hotkeys (/dev/input/event7)

[    91.788] (**) MSI WMI hotkeys: Applying InputClass "libinput keyboard catchall"

[    91.788] (II) Using input driver 'libinput' for 'MSI WMI hotkeys'

[    91.788] (**) MSI WMI hotkeys: always reports core events

[    91.788] (**) Option "Device" "/dev/input/event7"

[    91.788] (**) Option "_source" "server/udev"

[    91.788] (II) input device 'MSI WMI hotkeys', /dev/input/event7 is tagged by udev as: Keyboard

[    91.788] (II) input device 'MSI WMI hotkeys', /dev/input/event7 is a keyboard

[    91.812] (**) Option "config_info" "udev:/sys/devices/virtual/input/input8/event7"

[    91.812] (II) XINPUT: Adding extended input device "MSI WMI hotkeys" (type: KEYBOARD, id 13)

[    91.812] (**) Option "xkb_model" "pc105"

[    91.812] (**) Option "xkb_layout" "fr"

[    91.812] (**) Option "xkb_variant" "latin9"

[    91.813] (II) input device 'MSI WMI hotkeys', /dev/input/event7 is tagged by udev as: Keyboard

[    91.813] (II) input device 'MSI WMI hotkeys', /dev/input/event7 is a keyboard

[   107.519] (II) modeset(0): EDID vendor "CMN", prod id 5590

[   107.519] (II) modeset(0): Printing DDC gathered Modelines:

[   107.519] (II) modeset(0): Modeline "1920x1080"x0.0  152.84  1920 1964 1992 2250  1080 1082 1086 1132 -hsync -vsync (67.9 kHz eP)

[   107.534] (II) modeset(0): EDID vendor "CMN", prod id 5590

[   107.534] (II) modeset(0): Printing DDC gathered Modelines:

[   107.534] (II) modeset(0): Modeline "1920x1080"x0.0  152.84  1920 1964 1992 2250  1080 1082 1086 1132 -hsync -vsync (67.9 kHz eP)

[   107.547] (II) modeset(0): EDID vendor "CMN", prod id 5590

[   107.547] (II) modeset(0): Printing DDC gathered Modelines:

[   107.547] (II) modeset(0): Modeline "1920x1080"x0.0  152.84  1920 1964 1992 2250  1080 1082 1086 1132 -hsync -vsync (67.9 kHz eP)

[   107.561] (II) modeset(0): EDID vendor "CMN", prod id 5590

[   107.561] (II) modeset(0): Printing DDC gathered Modelines:

[   107.561] (II) modeset(0): Modeline "1920x1080"x0.0  152.84  1920 1964 1992 2250  1080 1082 1086 1132 -hsync -vsync (67.9 kHz eP)

[   107.878] (II) modeset(0): EDID vendor "CMN", prod id 5590

[   107.878] (II) modeset(0): Printing DDC gathered Modelines:

[   107.878] (II) modeset(0): Modeline "1920x1080"x0.0  152.84  1920 1964 1992 2250  1080 1082 1086 1132 -hsync -vsync (67.9 kHz eP)

[  1315.592] (II) modeset(0): EDID vendor "CMN", prod id 5590

[  1315.592] (II) modeset(0): Printing DDC gathered Modelines:

[  1315.592] (II) modeset(0): Modeline "1920x1080"x0.0  152.84  1920 1964 1992 2250  1080 1082 1086 1132 -hsync -vsync (67.9 kHz eP)

[  1781.344] (EE) kernel bug: Touch jump detected and discarded.

See https://wayland.freedesktop.org/libinput/doc/1.6.3/touchpad_jumping_cursor.html for details

[  1781.844] (EE) kernel bug: Touch jump detected and discarded.

See https://wayland.freedesktop.org/libinput/doc/1.6.3/touchpad_jumping_cursor.html for details

[  1781.844] (EE) kernel bug: Touch jump detected and discarded.

See https://wayland.freedesktop.org/libinput/doc/1.6.3/touchpad_jumping_cursor.html for details

[  1781.868] (EE) kernel bug: Touch jump detected and discarded.

See https://wayland.freedesktop.org/libinput/doc/1.6.3/touchpad_jumping_cursor.html for details

[  1781.868] (EE) kernel bug: Touch jump detected and discarded.

See https://wayland.freedesktop.org/libinput/doc/1.6.3/touchpad_jumping_cursor.html for details

[  1782.343] (EE) kernel bug: Touch jump detected and discarded.

See https://wayland.freedesktop.org/libinput/doc/1.6.3/touchpad_jumping_cursor.html for details

[  5840.699] (II) modeset(0): EDID vendor "CMN", prod id 5590

[  5840.699] (II) modeset(0): Printing DDC gathered Modelines:

[  5840.699] (II) modeset(0): Modeline "1920x1080"x0.0  152.84  1920 1964 1992 2250  1080 1082 1086 1132 -hsync -vsync (67.9 kHz eP)

anonyme · 02-02-2019 15:56:38

on a pas installé un noyau 4.19 des backports ?

[    91.456] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-8-amd64 root=UUID=bbff43bc-84eb-4fa4-b32e-2c2a7448983c ro quiet

 

sinon le retour pour ton gpu intel est bon (ne correspond pas a celui de "glxinfo -B)
la date du log est bonne aussi , tu a démarré ta machine a 09:24:35 le samedi 02/02/2019

[    91.456] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Feb  2 09:24:35 2019

 

je confond avec un autre sujet sur bumblebee sûrement

tu n'a que le problème d'installation de bumblebee (conflit de paquet )

non a priori on est resté sur le noyau 4.9 avec le driver nvidia de stretch vue que bumblebee-nvidia n'est pas sur les backports.
donne a nouveau le retour de glxinfo -B qui doit etre correct (pour intel)

glxinfo -B

 

on va profité de la remarque du #131

apt search nvidia | grep install

 

WARNING: apt does not have a stable CLI interface. Use with caution in scripts.

 

avec plein de retour pour moi , j'ai un driver installé . ce message CLI je sais pas a quoi il correspond.

Dernière modification par anonyme (02-02-2019 16:38:41)

Lam3ch · 02-02-2019 21:55:48

0glxinfo -B

name of display: :0

display: :0  screen: 0

direct rendering: Yes

Extended renderer info (GLX_MESA_query_renderer):

    Vendor: Intel Open Source Technology Center (0x8086)

    Device: Mesa DRI Intel(R) Kabylake GT2  (0x591b)

    Version: 13.0.6

    Accelerated: yes

    Video memory: 3072MB

    Unified memory: yes

    Preferred profile: core (0x1)

    Max core profile version: 4.5

    Max compat profile version: 3.0

    Max GLES1 profile version: 1.1

    Max GLES[23] profile version: 3.2

OpenGL vendor string: Intel Open Source Technology Center

OpenGL renderer string: Mesa DRI Intel(R) Kabylake GT2 

OpenGL core profile version string: 4.5 (Core Profile) Mesa 13.0.6

OpenGL core profile shading language version string: 4.50

OpenGL core profile context flags: (none)

OpenGL core profile profile mask: core profile

OpenGL version string: 3.0 Mesa 13.0.6

OpenGL shading language version string: 1.30

OpenGL context flags: (none)

OpenGL ES profile version string: OpenGL ES 3.2 Mesa 13.0.6

OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.20

apt search nvidia | grep install

WARNING: apt does not have a stable CLI interface. Use with caution in scripts.

firmware-misc-nonfree/stretch-backports,stretch-backports,now 20180825+dfsg-1~bpo9+1 all  [installé]

libvdpau1/stable,now 1.1.1-6 amd64  [installé, automatique]

  NVIDIA EGL installable client driver (ICD)

nvidia-installer-cleanup/stable 20151021+4 amd64

  cleanup after driver installation with the nvidia-installer

  NVIDIA OpenCL installable client driver (ICD) (304xx legacy version)

  NVIDIA OpenCL installable client driver (ICD) (340xx legacy version)

  NVIDIA EGL installable client driver (ICD)

  NVIDIA OpenCL installable client driver (ICD) (390xx legacy version)

  NVIDIA Vulkan installable client driver (ICD) (390xx legacy version)

  NVIDIA Vulkan installable client driver (ICD) (non-GLVND variant)

  NVIDIA OpenCL installable client driver (ICD)

  NVIDIA Vulkan installable client driver (ICD)

vdpau-driver-all/stable,now 1.1.1-6 amd64  [installé, automatique]

Alors je ne sais plus trop on a fait tellement de choses mais pour moi sur les dernières manip on a pas touché au noyau de linux. Juste des paquets pris sur les stretch-backport je crois

uname -a

Linux debian 4.9.0-8-amd64 #1 SMP Debian 4.9.130-2 (2018-10-27) x86_64 GNU/Linux

 

Encore merci pour ton aide et ta patience !!!

Edit à toto : Modif faite à la commande user 0glxinfo -B pour qu'elle soit visible sur le forum.

anonyme · 02-02-2019 22:18:47

Bonsoir

on a finit ici => https://debian-facile.org/viewtopic.php?id=23548&p=3

donc tu est sous stretch avec les backports ? (moi aussi je me perd dans tout cela )

tu est partant pour migrer sur Buster ?

@toto : pas de 0 devant glxinfo -B

Dernière modification par anonyme (02-02-2019 22:28:07)

Debian-facile

#126 27-01-2019 15:36:29

Re : [RESOLU] Freeze au lancement de GNOME

#127 29-01-2019 23:06:49

Re : [RESOLU] Freeze au lancement de GNOME

#128 31-01-2019 08:33:18

Re : [RESOLU] Freeze au lancement de GNOME

#129 31-01-2019 09:31:49

Re : [RESOLU] Freeze au lancement de GNOME

#130 02-02-2019 09:35:49

Re : [RESOLU] Freeze au lancement de GNOME

#131 02-02-2019 10:03:52

Re : [RESOLU] Freeze au lancement de GNOME

#132 02-02-2019 10:30:26

Re : [RESOLU] Freeze au lancement de GNOME

#133 02-02-2019 12:38:20

Re : [RESOLU] Freeze au lancement de GNOME

#134 02-02-2019 12:55:27

Re : [RESOLU] Freeze au lancement de GNOME

#135 02-02-2019 13:02:25

Re : [RESOLU] Freeze au lancement de GNOME

#136 02-02-2019 13:24:23

Re : [RESOLU] Freeze au lancement de GNOME

#137 02-02-2019 13:46:40

Re : [RESOLU] Freeze au lancement de GNOME

#138 02-02-2019 13:48:21

Re : [RESOLU] Freeze au lancement de GNOME

#139 02-02-2019 13:56:11

Re : [RESOLU] Freeze au lancement de GNOME

#140 02-02-2019 14:21:15

Re : [RESOLU] Freeze au lancement de GNOME

#141 02-02-2019 14:29:51

Re : [RESOLU] Freeze au lancement de GNOME

#142 02-02-2019 14:41:33

Re : [RESOLU] Freeze au lancement de GNOME

#143 02-02-2019 15:02:37

Re : [RESOLU] Freeze au lancement de GNOME

#144 02-02-2019 15:15:01

Re : [RESOLU] Freeze au lancement de GNOME

#145 02-02-2019 15:24:15

Re : [RESOLU] Freeze au lancement de GNOME

#146 02-02-2019 15:31:09

Re : [RESOLU] Freeze au lancement de GNOME

#147 02-02-2019 15:36:40

Re : [RESOLU] Freeze au lancement de GNOME

#148 02-02-2019 15:56:38

Re : [RESOLU] Freeze au lancement de GNOME

#149 02-02-2019 21:55:48

Re : [RESOLU] Freeze au lancement de GNOME

#150 02-02-2019 22:18:47

Re : [RESOLU] Freeze au lancement de GNOME

Pied de page des forums