logo Debian Debian Debian-France Debian-Facile Debian-fr.org Forum-Debian.fr Debian ? Communautés logo inclusivité

Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#26 24-03-2019 14:18:08

Bakenekoo
Membre
Distrib. : buster/sid (Debian Testing)
Noyau : Linux 4.19.0-2-amd 64
(G)UI : Gnome
Inscription : 22-03-2019

Re : écran noir après reboot

@anonyme C'est fait.

Hors ligne

#27 24-03-2019 14:30:34

anonyme
Invité

Re : écran noir après reboot

"apt update" te répond que ton système est a jour ?
et pas d'erreurs sur le retour dans la console ?

#28 24-03-2019 14:43:19

Bakenekoo
Membre
Distrib. : buster/sid (Debian Testing)
Noyau : Linux 4.19.0-2-amd 64
(G)UI : Gnome
Inscription : 22-03-2019

Re : écran noir après reboot

Oui

apt update


Réception de :1 http://deb.debian.org/debian buster InRelease [158 kB]
Réception de :2 http://deb.debian.org/debian buster-updates InRelease [46,8 kB]
Réception de :3 http://deb.debian.org/debian-security buster/updates InRelease [38,3 kB]
Réception de :4 http://deb.debian.org/debian buster/main amd64 Packages [7889 kB]
Réception de :5 http://deb.debian.org/debian buster/main i386 Packages [7847 kB]
Réception de :6 http://deb.debian.org/debian buster/main Translation-en [5985 kB]
Réception de :7 http://deb.debian.org/debian buster/main Translation-fr [2286 kB]
Réception de :8 http://deb.debian.org/debian buster/main amd64 DEP-11 Metadata [3843 kB]
Réception de :9 http://deb.debian.org/debian buster/main DEP-11 48x48 Icons [3794 kB]
Réception de :10 http://deb.debian.org/debian buster/main DEP-11 64x64 Icons [7625 kB]
Réception de :11 http://deb.debian.org/debian buster/main DEP-11 128x128 Icons [12,8 MB]
Réception de :12 http://deb.debian.org/debian buster/contrib amd64 Packages [52,8 kB]
Réception de :13 http://deb.debian.org/debian buster/contrib i386 Packages [48,1 kB]
Réception de :14 http://deb.debian.org/debian buster/contrib Translation-en [46,1 kB]
Réception de :15 http://deb.debian.org/debian buster/contrib amd64 DEP-11 Metadata [12,9 kB]
Réception de :16 http://deb.debian.org/debian buster/contrib DEP-11 48x48 Icons [58,1 kB]
Réception de :17 http://deb.debian.org/debian buster/contrib DEP-11 64x64 Icons [123 kB]
Réception de :18 http://deb.debian.org/debian buster/contrib DEP-11 128x128 Icons [222 kB]
Réception de :19 http://deb.debian.org/debian buster/non-free amd64 Packages [88,5 kB]
Réception de :20 http://deb.debian.org/debian buster/non-free i386 Packages [76,7 kB]
Réception de :21 http://deb.debian.org/debian buster/non-free Translation-en [88,7 kB]
Réception de :22 http://deb.debian.org/debian buster/non-free amd64 DEP-11 Metadata [9048 B]
Réception de :23 http://deb.debian.org/debian buster/non-free DEP-11 48x48 Icons [3496 B]
Réception de :24 http://deb.debian.org/debian buster/non-free DEP-11 64x64 Icons [38,4 kB]
Réception de :25 http://deb.debian.org/debian buster/non-free DEP-11 128x128 Icons [6732 B]
53,1 Mo réceptionnés en 4min 40s (190 ko/s)                                    
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances      
Lecture des informations d'état... Fait
Tous les paquets sont à jour.
 

Hors ligne

#29 24-03-2019 15:00:46

anonyme
Invité

Re : écran noir après reboot

tente ceci (normalement ne va rien faire)


apt-get dist-upgrade
 


puis


apt-get autoclean
 


puis (normalement rien a purger )
en simulation


apt-get -s autoremove --purge
 


si ça renvoie rien c'est parfait , sinon tu poste qu il te propose de retirer des paquets avant d'aller plus loin .
vérifie si acpid est installé avec cette commande


apt-get --reinstall install acpid
 


supprimer bumblebee


apt-get remove --purge bumblebee primus bumblebee-nvidia xserver-xorg-video-nvidia
 


tu vérifie que un xorg.conf dans "/etc/X11/"  n'existe pas et que le dossier  "/etc/X11/xorg.conf.d/"    est vide
et un reboot ( sans nomodeset )

#30 24-03-2019 15:21:42

anonyme
Invité

Re : écran noir après reboot

je cherche a faire fonctionner gnome avec ton petit gpu =>   Intel® HD Graphics 5500
si tu retrouve le bureau ça va être plus simple pour toi
pas vérifié mais ce gpu doit être pris en natif par le noyau (pas d'erreur de drm ) mais tu peu installer le firmware pour intel


apt-get --réinstall install firmware-misc-nonfree
 


créer le fichier nouveau-blacklist.conf dans /etc/modprobe.d/


nano /etc/modprobe.d/nouveau-blacklist.conf
 


tu met dedans


blacklist nouveau
 


tu enregistre avec "o" et ferme nano avec "x"
puis un un reboot

nota : tu peu ajouter des options a partir de grub ,  il suffit de taper "e" sur le menu de grub avant la tempo de 10s (ou passer sur la deuxième ligne et revenir sur la première pour désactiver la tempo ) provisoire juste pour cette session , ou a partir de /etc/default/grub  ( permanent ) avec un update-grub
a toi de me dire si tu te sent de le faire (le but est de désactiver KMS et nouveau le temps de comprendre pourquoi cet écran noir )

ps: un manque de place sur le disque dur a vérifier , tu a tout le système sur une seule partition ?  (la commande "autoclean" ta sûrement rendu quelques giga )

Dernière modification par anonyme (24-03-2019 15:32:56)

#31 24-03-2019 18:12:28

Bakenekoo
Membre
Distrib. : buster/sid (Debian Testing)
Noyau : Linux 4.19.0-2-amd 64
(G)UI : Gnome
Inscription : 22-03-2019

Re : écran noir après reboot

Dans /etc/X11 j'ai un fichier xorg.conf.nvidia-xconfig-original.
Et je n'ai pas de dossier /etc/X11/xorg.conf.d/

Je fais quand même les commandes indiquées dans le dernier post?

Dernière modification par Bakenekoo (24-03-2019 18:13:15)

Hors ligne

#32 24-03-2019 18:30:21

anonyme
Invité

Re : écran noir après reboot

oui tu peu faire les commandes ,  et supprimer ou déplacer ce fichier  xorg.conf.nvidia-xconfig-original
par exemple


mv /etc/X11/xorg.conf.nvidia-xconfig-original /home/tonuser/Documents/xorg.conf.nvidia-xconfig-original
 

Dernière modification par anonyme (24-03-2019 18:31:26)

#33 24-03-2019 19:01:38

Bakenekoo
Membre
Distrib. : buster/sid (Debian Testing)
Noyau : Linux 4.19.0-2-amd 64
(G)UI : Gnome
Inscription : 22-03-2019

Re : écran noir après reboot

C'est fait.
Et oui je me sens d'ajouter des options à partir de grub

Hors ligne

#34 24-03-2019 19:08:35

anonyme
Invité

Re : écran noir après reboot

de mémoire c'est la ligne qui commence par linux et finit par quiet
donc faire e au menu de grub
juste avant quiet tu ajoute ceci "nouveau.modeset=0 quiet" et F10 pour continuer avec la modification
c'est provisoire a refaire a chaque démarrage
avec le fichier nouveau-blacklist.conf et cette commande dans grub voir si tu a toujours l'écran noir

Dernière modification par anonyme (24-03-2019 19:09:53)

#35 24-03-2019 20:30:59

Bakenekoo
Membre
Distrib. : buster/sid (Debian Testing)
Noyau : Linux 4.19.0-2-amd 64
(G)UI : Gnome
Inscription : 22-03-2019

Re : écran noir après reboot

Toujours l'écran noir avec "nouveau.modeset=0 quiet"

Hors ligne

#36 24-03-2019 20:51:41

Y316
Membre
Distrib. : stretch
Noyau : Linux 4.9.0-8-amd64
(G)UI : MATE 1.16.2
Inscription : 15-11-2012

Re : écran noir après reboot

C'est pas que je veuille contrarier mais :  https://packages.debian.org/buster/systemd

essaye en console avant de lancer startx à la main :

systemctl enable gdm3


et aussi redonner

systemd-cgls | grep Xorg

Mais sans avoir lancé startx à la main donc avant la commande précèdente.


Debian 9 (stretch)  + la pire ICC que vous ayez probablement jamais rencontré.

Hors ligne

#37 24-03-2019 23:42:11

Bakenekoo
Membre
Distrib. : buster/sid (Debian Testing)
Noyau : Linux 4.19.0-2-amd 64
(G)UI : Gnome
Inscription : 22-03-2019

Re : écran noir après reboot

systemctl enable gdm3


Synchronizing state of gdm3.service with SysV service script with /lib/systemd/systemd-sysv-install.
Executing: /lib/systemd/systemd-sysv-install enable gdm3
The unit files have no installation  config (WantedBy=, RequiredBy=, Also=,
Alias settings in the [Install] section, and DefaultInstance= for template
units). This means they are not meant to be enabled using systemctl.

Possible reasons for having this kind of units are:
.A unit may be statically enabled by being symlinked from another unit's
  .wants/or .requires/ directory.
.A unit's purpose may be to act as a helper for some other unit which has
 a requirement dependency on it.
.A unit may be started when needed via activation (socket, path, timer,
 D-Bus, udev, scripted systemctl call, ...).
.In case of template units, the unit is meants to be enabled with some
 instance name specified.



system-cgls |grep Xorg


|      |_
|        1624 grep Xorg

Hors ligne

#38 25-03-2019 00:30:42

Y316
Membre
Distrib. : stretch
Noyau : Linux 4.9.0-8-amd64
(G)UI : MATE 1.16.2
Inscription : 15-11-2012

Re : écran noir après reboot


Debian 9 (stretch)  + la pire ICC que vous ayez probablement jamais rencontré.

Hors ligne

#39 25-03-2019 13:23:57

Bakenekoo
Membre
Distrib. : buster/sid (Debian Testing)
Noyau : Linux 4.19.0-2-amd 64
(G)UI : Gnome
Inscription : 22-03-2019

Re : écran noir après reboot

@Y316 C'est fait mais l'écran noir est toujours là.

Hors ligne

#40 25-03-2019 13:34:38

anonyme
Invité

Re : écran noir après reboot

Bonjour
cette commande


dmesg | grep drm
 

#41 25-03-2019 13:52:43

anonyme
Invité

Re : écran noir après reboot

regarde a peu près le même souci  =>  https://debian-facile.org/viewtopic.php?id=23927  ( il n'a pas de gestionnaire de connexion  installé , son choix )
les erreurs en cour


journalctl -r -p err
 



une buster propre , pas de bumblebee , bumblebee-nvidia , de driver nvidia , de primus
désactiver nouveau et kms , par exemple avec nouveau.modeset =0 et un fichier avec "blacklist nouveau"
trouver pourquoi le gpu intel bug , voir le log /home/tonuser/.local/share/xorg/Xorg.0.log

nota : si tu fais startx il faut le faire en "user" pas en "root" a partir de la console pure

#42 25-03-2019 14:07:07

anonyme
Invité

Re : écran noir après reboot

pour mettre permanent la désactivation de KMS pour nouveau dans grub
ouvrir /etc/default/grub


nano /etc/default/grub
 


ce qui donne (le début)


# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet"
GRUB_CMDLINE_LINUX=""
 


tu le modifie comme ceci


# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="nouveau.modeset=0 quiet"
GRUB_CMDLINE_LINUX=""
 


tu enregistre avec "ctrl + o"  et tu ferme nano avec "ctrl + x"
puis un update-grub


update-grub
 


et un reboot

pour blacklist nouveau tu ouvre un fichier comme ceci


nano /etc/modprobe.d/blacklist-nouveau.conf
 


tu met dedans ceci


blacklist nouveau
 


et un reboot
tu passe en console pure "Ctrl + Alt + F2 (ou F3)"
tu fais (en root]


service gdm3 stop
 


puis tu passe en user


startx
 

#43 25-03-2019 18:19:13

Bakenekoo
Membre
Distrib. : buster/sid (Debian Testing)
Noyau : Linux 4.19.0-2-amd 64
(G)UI : Gnome
Inscription : 22-03-2019

Re : écran noir après reboot

dmesg | grep drm


[   11.705576] fb: switching to inteldrmfb from EFI VGA
[   11.705689] [drm] Replacing VGA console driver
[   11.706391] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   11.706391] [drm] Driver supports precise vblank timestamp query.
[   11.840936] [drm] Initialized i915 1.6.0 20180719 for 0000:00:02.0 on minor 0
[   11.849554] fbcon: inteldrmfb (fb0) is primary device
[   13.076687] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   14.476510] [drm] Initialized nouveau 1.3.1 20120801 for 0000:04:00.0 on minor 1
 



journalctl -r -p err


-- Logs begin at Mon 2019-03-25 17:33:32 CET, end at Mon 2019-03-25 18:36:42 CET. --
mars 25 17:41:34 pc-10 kernel: proc_thermal 0000:00:04.0: Unsupported event [0x84]
mars 25 17:41:32 pc-10 kernel: proc_thermal 0000:00:04.0: Unsupported event [0x84]
mars 25 17:40:35 pc-10 kernel: proc_thermal 0000:00:04.0: Unsupported event [0x84]
mars 25 17:40:34 pc-10 kernel: proc_thermal 0000:00:04.0: Unsupported event [0x84]
mars 25 17:33:55 pc-10 systemd[1]: Failed to start Session c1 of user Debian-gdm.
mars 25 17:33:45 pc-10 gdm-launch-environment][1044]: pam_systemd(gdm-launch-environment:session): Failed to create session: Connexion terminée par ex
mars 25 18:36:30 pc-10 minissdpd[753]: ioctl(s, SIOCGIFADDR, ...): Cannot assign requested address
mars 25 18:36:25 pc-10 wpa_supplicant[561]: bgscan simple: Failed to enable signal strength monitoring
mars 25 18:36:21 pc-10 bluetoothd[563]: sap-server: Operation not permitted (1)
mars 25 18:36:21 pc-10 bluetoothd[563]: Sap driver initialization failed.
mars 25 18:36:20 pc-10 avahi-daemon[596]: chroot.c: open() failed: No such file or directory
mars 25 18:36:12 pc-10 kernel: Bluetooth: hci0: command 0x1003 tx timeout
mars 25 18:36:10 pc-10 kernel: firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware
mars 25 18:36:10 pc-10 kernel: bluetooth hci0: firmware: failed to load brcm/BCM43142A0-04ca-2006.hcd (-2)
 



Mon fichier /home/tonuser/.local/share/xorg/Xorg.0.log contient:

[   386.953]
X.Org X Server 1.20.3
X Protocol Version 11, Revision 0
[   386.953] Build Operating System: Linux 4.9.0-8-amd64 x86_64 Debian
[   386.953] Current Operating System: Linux pc-10 4.19.0-2-amd64 #1 SMP Debian 4.19.16-1 (2019-01-17) x86_64
[   386.953] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-2-amd64 root=UUID=c75505f6-f04c-4a8e-ad63-f2c68e5549d9 ro quiet
[   386.953] Build Date: 25 October 2018  06:15:23PM
[   386.953] xorg-server 2:1.20.3-1 (https://www.debian.org/support)
[   386.953] Current version of pixman: 0.36.0
[   386.953]    Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
[   386.953] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   386.954] (==) Log file: "/home/bakeneko/.local/share/xorg/Xorg.0.log", Time: Mon Mar 25 17:39:10 2019
[   386.968] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   387.011] (==) No Layout section.  Using the first Screen section.
[   387.011] (==) No screen section available. Using defaults.
[   387.011] (**) |-->Screen "Default Screen Section" (0)
[   387.011] (**) |   |-->Monitor "<default monitor>"
[   387.017] (==) No monitor specified for screen "Default Screen Section".
        Using a default monitor configuration.
[   387.017] (==) Automatically adding devices
[   387.017] (==) Automatically enabling devices
[   387.017] (==) Automatically adding GPU devices
[   387.017] (==) Max clients allowed: 256, resource mask: 0x1fffff
[   387.069] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[   387.069]    Entry deleted from font path.
[   387.105] (==) FontPath set to:
        /usr/share/fonts/X11/misc,
 



Quand j'ai lancé

startx

après les commandes indiquées, l'interface graphique ne s'est pas lancée:

xauth: timeout in locking authority file /home/bakeneko/.Xauthority
xauth: timeout in locking authority file /home/bakeneko/.Xauthority



X.Org X Server 1.20.3
X Protocol Version 11, Revision 0
Build Operating System: Linux 4.9.0-8-amd64 x86_64 Debian
Current Operating System: Linux pc-10 4.19.0-2-amd64 #1 SMP Debian 4.19.16-1 (2019-01-17) x86_64
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-2-amd64 root=UUID=c75505f6-f04c-4a8e-ad63-f2c68e5549d9 ro quiet
Build Date: 25 October 2018 06:15:23PM
xorg-server 2:1.20.3-1 (https://www.debian.org/support)
Current version of pixman: 0.36.0
            Before reporting problems, check http:wiki.x.org
            to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
            (++) from command line, (||) notice, (II) informational,
            (WW) warning, (EE) error, (NI) not implemented (??) unknow.
(==) Log file: "/home/bakeneko/.local/share/xorg/Xorg.0.log", Time: Mon Mar 25 17:20:19 2019
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
                                                                                                         (II) modeset(0): Initializing kms color map depth 24, 8 bpc.
                                                                                                                                                                                                  Invalid MIT=MAGIC-COOKIE-1 key
waiting for X server to begin accepting connections .
                                                                               Invalid MIT-MAGIC-COOKIE-1 key..
                                                                                                                                   Invalid MIT-MAGIC-COOKIE-1 key..
                                                                                                                                                                                       Invalid MIT-MAGIC-COOKIE-1 key..
Invalid MIT-MAGIC-COOKIE-1 key..
waiting for X server to shut deown (II) Server terminated successfully  (0). Closing log file.alid MIT-MAGIC-COOKIE-1 key.xinit: giving upxinit: unable to connect to x server

xinit: server error
Segmentation fault
 

Hors ligne

#44 25-03-2019 20:08:50

anonyme
Invité

Re : écran noir après reboot

voila une machine qui démarre avec "nomodeset"


0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-2-amd64
root=UUID=c65e48a0-8000-4b5c-a705-091545f46c72 ro quiet nomodeset
 


pour toi tu me donne un log comme ceci


[   386.953] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-2-amd64
root=UUID=c75505f6-f04c-4a8e-ad63-f2c68e5549d9 ro quiet
 


je vois pas l'option "nouveau.modeset=0" dans ta ligne des options donné au noyau ?
tu n'a pas mit en place le "blacklist nouveau" et "nouveau.modeset=0" ?  comme au #42

ceci est pas normal nouveau est désactivé => "[   14.476510] [drm] Initialized nouveau 1.3.1 20120801 for 0000:04:00.0 on minor 1 " (sur ton #43 )

le serveur X ne démarre pas , ça c'est sur
deuxième anomalie la date de ton deuxième log est plus ancienne que le premier


[   386.954] (==) Log file: "/home/bakeneko/.local/share/xorg/Xorg.0.log", Time: Mon Mar 25 17:39:10 2019

(==) Log file: "/home/bakeneko/.local/share/xorg/Xorg.0.log", Time: Mon Mar 25 17:20:19 2019
 



19 minutes de différence environ (et le second est trés endommagé ou le copier/coller mauvais )

#45 25-03-2019 21:39:07

Y316
Membre
Distrib. : stretch
Noyau : Linux 4.9.0-8-amd64
(G)UI : MATE 1.16.2
Inscription : 15-11-2012

Re : écran noir après reboot

Soyons clair : je comprends rien, je cherche seulement.  smile

xauth: timeout in locking authority file /home/bakeneko/.Xauthority

waiting for X server to begin accepting connections .
                                                                               Invalid MIT-MAGIC-COOKIE-1 key..


Chez moi (mais c'est stretch) le MIT-MAGIC-COOkIE-1 c'est le contenu du fichier  /home/tonuser/.Xauthority

Question : peut-on supprimer ce fichier sans danger ?


Debian 9 (stretch)  + la pire ICC que vous ayez probablement jamais rencontré.

Hors ligne

#46 25-03-2019 23:55:03

Bakenekoo
Membre
Distrib. : buster/sid (Debian Testing)
Noyau : Linux 4.19.0-2-amd 64
(G)UI : Gnome
Inscription : 22-03-2019

Re : écran noir après reboot

@anonyme

je vois pas l'option "nouveau.modeset=0" dans ta ligne des options donné au noyau ?
tu n'a pas mit en place le "blacklist nouveau" et "nouveau.modeset=0" ?  comme au #42

ceci est pas normal nouveau est désactivé => "[   14.476510] [drm] Initialized nouveau 1.3.1 20120801 for 0000:04:00.0 on minor 1 " (sur ton #43 )


En effet mea-culpa, j'ai dû faire une fausse manip en modifiant /etc/default/grub, par contre blacklist nouveau était bien mis en place. Du coup j'ai refait la manip en modifiant correctement /etc/default/grub:

startx


xauth: timeout in locking authority file /home/bakeneko/.Xauthority
[   293.558008] proc_thermal 0000:00:04.0: Unsupported event [0x84]
xauth: timeout in locking authority file /home/bakeneko/.Xauthority



X.Org X Server 1.20.3
X Protocol Version 11, Revision 0
Build Operating System: Linux 4.9.0-8-amd64 x86_64 Debian
Current Operating System: Linux pc-10 4.19.0-2-amd64 #1 SMP Debian 4.19.16-1 (2019-01-17) x86_64
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-2-amd64 root=UUID=c75505f6-f04c-4a8e-ad63-f2c68e5549d9 ro nouveau.modeset=0 quiet
Build Date: 25 October 2018 06:15:23PM
xorg-server 2:1.20.3-1 (https://www.debian.org/support)
Current version of pixman: 0.36.0
            Before reporting problems, check http:wiki.x.org
            to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
            (++) from command line, (||) notice, (II) informational,
            (WW) warning, (EE) error, (NI) not implemented (??) unknow.
(==) Log file: "/home/bakeneko/.local/share/xorg/Xorg.0.log", Time: Mon Mar 25 23:32:22 2019
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
waiting for X server to shut down (II) Server terminated successfully (0). Closing log file.alid MIT-MAGIC-COOKIE-1 key.xinit: giving upxinit: unable to connect to X server

xinit: server error
xauth: timeout in locking authority file /home/bakeneko/.Xauthority
 



Après j'ai refait startx sans reboot et l'interface s'est lancée.
Pour le deuxième log c'est parce que j'ai fait le second avant le premier et c'est fort probable que j'ai fait un mauvais copier/coller/

Hors ligne

#47 25-03-2019 23:56:49

anonyme
Invité

Re : écran noir après reboot

donc maintenant tu a le bureau ?  (ou pas )

Après j'ai refait startx sans reboot et l'interface s'est lancée.



si le bureau fonctionne maintenant tu peu me donner le log de X et le retour de glxinfo -B (avec le paquet "mesa-utils" installé


glxinfo -B
 



pour le log toujours dans ton /home

Dernière modification par anonyme (26-03-2019 00:09:35)

#48 26-03-2019 09:39:22

Bakenekoo
Membre
Distrib. : buster/sid (Debian Testing)
Noyau : Linux 4.19.0-2-amd 64
(G)UI : Gnome
Inscription : 22-03-2019

Re : écran noir après reboot

Oui j'ai le bureau.

Le log de X:

[   601.690]
X.Org X Server 1.20.3
X Protocol Version 11, Revision 0
[   601.692] Build Operating System: Linux 4.9.0-8-amd64 x86_64 Debian
[   601.693] Current Operating System: Linux pc-10 4.19.0-2-amd64 #1 SMP Debian 4.19.16-1 (2019-01-17) x86_64
[   601.693] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-2-amd64 root=UUID=c75505f6-f04c-4a8e-ad63-f2c68e5549d9 ro nouveau.modeset=0 quiet
[   601.695] Build Date: 25 October 2018  06:15:23PM
[   601.696] xorg-server 2:1.20.3-1 (https://www.debian.org/support)
[   601.697] Current version of pixman: 0.36.0
[   601.699]  Before reporting problems, check http://wiki.x.org
  to make sure that you have the latest version.
[   601.699] Markers: (--) probed, (**) from config file, (==) default setting,
  (++) from command line, (!!) notice, (II) informational,
  (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   601.702] (==) Log file: "/home/bakeneko/.local/share/xorg/Xorg.0.log", Time: Mon Mar 25 23:37:29 2019
[   601.704] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   601.704] (==) No Layout section.  Using the first Screen section.
[   601.704] (==) No screen section available. Using defaults.
[   601.704] (**) |-->Screen "Default Screen Section" (0)
[   601.704] (**) |   |-->Monitor "<default monitor>"
[   601.704] (==) No monitor specified for screen "Default Screen Section".
  Using a default monitor configuration.
[   601.704] (==) Automatically adding devices
[   601.704] (==) Automatically enabling devices
[   601.704] (==) Automatically adding GPU devices
[   601.704] (==) Max clients allowed: 256, resource mask: 0x1fffff
[   601.704] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[   601.704]  Entry deleted from font path.
[   601.704] (==) FontPath set to:
  /usr/share/fonts/X11/misc,
  /usr/share/fonts/X11/100dpi/:unscaled,
  /usr/share/fonts/X11/75dpi/:unscaled,
  /usr/share/fonts/X11/Type1,
  /usr/share/fonts/X11/100dpi,
  /usr/share/fonts/X11/75dpi,
  built-ins
[   601.704] (==) ModulePath set to "/usr/lib/xorg/modules"
[   601.704] (II) The server relies on udev to provide the list of input devices.
  If no devices become available, reconfigure udev or disable AutoAddDevices.
[   601.704] (II) Loader magic: 0x55e4663e6e20
[   601.704] (II) Module ABI versions:
[   601.704]  X.Org ANSI C Emulation: 0.4
[   601.704]  X.Org Video Driver: 24.0
[   601.704]  X.Org XInput driver : 24.1
[   601.704]  X.Org Server Extension : 10.0
[   601.705] (++) using VT number 3

[   601.707] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_33
[   601.707] (II) xfree86: Adding drm device (/dev/dri/card0)
[   601.708] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 11 paused 0
[   601.709] (--) PCI:*(0@0:2:0) 8086:1616:1043:1a6d rev 9, Mem @ 0xf5000000/16777216, 0xd0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[   601.709] (--) PCI: (4@0:0:0) 10de:1347:1043:1a6d rev 162, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000d000/128, BIOS @ 0x????????/524288
[   601.709] (II) LoadModule: "glx"
[   601.709] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   601.710] (II) Module glx: vendor="X.Org Foundation"
[   601.710]  compiled for 1.20.3, module version = 1.0.0
[   601.710]  ABI class: X.Org Server Extension, version 10.0
[   601.710] (==) Matched modesetting as autoconfigured driver 0
[   601.710] (==) Matched fbdev as autoconfigured driver 1
[   601.710] (==) Matched vesa as autoconfigured driver 2
[   601.710] (==) Assigned the driver to the xf86ConfigLayout
[   601.710] (II) LoadModule: "modesetting"
[   601.710] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[   601.710] (II) Module modesetting: vendor="X.Org Foundation"
[   601.710]  compiled for 1.20.3, module version = 1.20.3
[   601.710]  Module class: X.Org Video Driver
[   601.710]  ABI class: X.Org Video Driver, version 24.0
[   601.710] (II) LoadModule: "fbdev"
[   601.710] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[   601.710] (II) Module fbdev: vendor="X.Org Foundation"
[   601.710]  compiled for 1.20.0, module version = 0.5.0
[   601.710]  Module class: X.Org Video Driver
[   601.710]  ABI class: X.Org Video Driver, version 24.0
[   601.710] (II) LoadModule: "vesa"
[   601.711] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[   601.711] (II) Module vesa: vendor="X.Org Foundation"
[   601.711]  compiled for 1.20.1, module version = 2.4.0
[   601.711]  Module class: X.Org Video Driver
[   601.711]  ABI class: X.Org Video Driver, version 24.0
[   601.711] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[   601.711] (II) FBDEV: driver for framebuffer: fbdev
[   601.711] (II) VESA: driver for VESA chipsets: vesa
[   601.711] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[   601.711] (II) modeset(0): using drv /dev/dri/card0
[   601.711] (WW) Falling back to old probe method for fbdev
[   601.711] (II) Loading sub module "fbdevhw"
[   601.711] (II) LoadModule: "fbdevhw"
[   601.711] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[   601.711] (II) Module fbdevhw: vendor="X.Org Foundation"
[   601.711]  compiled for 1.20.3, module version = 0.0.2
[   601.711]  ABI class: X.Org Video Driver, version 24.0
[   601.711] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[   601.711] (II) modeset(0): Creating default Display subsection in Screen section
  "Default Screen Section" for depth/fbbpp 24/32
[   601.711] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[   601.711] (==) modeset(0): RGB weight 888
[   601.711] (==) modeset(0): Default visual is TrueColor
[   601.711] (II) Loading sub module "glamoregl"
[   601.711] (II) LoadModule: "glamoregl"
[   601.711] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[   601.713] (II) Module glamoregl: vendor="X.Org Foundation"
[   601.713]  compiled for 1.20.3, module version = 1.0.1
[   601.713]  ABI class: X.Org ANSI C Emulation, version 0.4
[   601.726] (II) modeset(0): glamor X acceleration enabled on Mesa DRI Intel(R) HD Graphics 5500 (Broadwell GT2)
[   601.726] (II) modeset(0): glamor initialized
[   601.727] (II) modeset(0): Output eDP-1 has no monitor section
[   601.727] (II) modeset(0): Output DP-1 has no monitor section
[   601.729] (II) modeset(0): Output HDMI-1 has no monitor section
[   601.730] (II) modeset(0): Output HDMI-2 has no monitor section
[   601.731] (II) modeset(0): EDID for output eDP-1
[   601.731] (II) modeset(0): Manufacturer: SDC  Model: 354a  Serial#: 0
[   601.731] (II) modeset(0): Year: 2011  Week: 0
[   601.731] (II) modeset(0): EDID Version: 1.3
[   601.731] (II) modeset(0): Digital Display Input
[   601.731] (II) modeset(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[   601.731] (II) modeset(0): Gamma: 2.20
[   601.731] (II) modeset(0): No DPMS capabilities specified
[   601.731] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[   601.731] (II) modeset(0): First detailed timing is preferred mode
[   601.731] (II) modeset(0): redX: 0.620 redY: 0.355   greenX: 0.300 greenY: 0.580
[   601.731] (II) modeset(0): blueX: 0.150 blueY: 0.090   whiteX: 0.313 whiteY: 0.329
[   601.731] (II) modeset(0): Manufacturer's mask: 0
[   601.731] (II) modeset(0): Supported detailed timing:
[   601.731] (II) modeset(0): clock: 69.4 MHz   Image Size:  344 x 194 mm
[   601.731] (II) modeset(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1464 h_border: 0
[   601.731] (II) modeset(0): v_active: 768  v_sync: 770  v_sync_end 775 v_blanking: 790 v_border: 0
[   601.731] (II) modeset(0): Unknown vendor-specific block f
[   601.731] (II) modeset(0):  SAMSUNG
[   601.731] (II) modeset(0):  156AT35-P01
[   601.731] (II) modeset(0): EDID (in hex):
[   601.731] (II) modeset(0):   00ffffffffffff004c834a3500000000
[   601.731] (II) modeset(0):   00150103802213780ace859e5b4c9426
[   601.731] (II) modeset(0):   17505400000001010101010101010101
[   601.731] (II) modeset(0):   0101010101011b1b5662500016303020
[   601.731] (II) modeset(0):   250058c2100000190000000f00000000
[   601.731] (II) modeset(0):   00000000001eb4027400000000fe0053
[   601.731] (II) modeset(0):   414d53554e470a2020202020000000fe
[   601.731] (II) modeset(0):   00313536415433352d5030310a200053
[   601.732] (II) modeset(0): Printing probed modes for output eDP-1
[   601.732] (II) modeset(0): Modeline "1366x768"x60.0   69.39  1366 1414 1446 1464  768 770 775 790 -hsync -vsync (47.4 kHz eP)
[   601.732] (II) modeset(0): Modeline "1360x768"x59.8   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsync (47.7 kHz d)
[   601.732] (II) modeset(0): Modeline "1360x768"x60.0   72.00  1360 1408 1440 1520  768 771 781 790 +hsync -vsync (47.4 kHz d)
[   601.732] (II) modeset(0): Modeline "1280x720"x120.0  156.12  1280 1376 1512 1744  720 721 724 746 doublescan -hsync +vsync (89.5 kHz d)
[   601.732] (II) modeset(0): Modeline "1280x720"x120.0  120.75  1280 1304 1320 1360  720 721 724 740 doublescan +hsync -vsync (88.8 kHz d)
[   601.732] (II) modeset(0): Modeline "1280x720"x59.9   74.50  1280 1344 1472 1664  720 723 728 748 -hsync +vsync (44.8 kHz d)
[   601.732] (II) modeset(0): Modeline "1280x720"x59.7   63.75  1280 1328 1360 1440  720 723 728 741 +hsync -vsync (44.3 kHz d)
[   601.732] (II) modeset(0): Modeline "1024x768"x120.1  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[   601.732] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[   601.732] (II) modeset(0): Modeline "960x720"x120.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[   601.732] (II) modeset(0): Modeline "928x696"x120.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[   601.732] (II) modeset(0): Modeline "896x672"x120.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[   601.732] (II) modeset(0): Modeline "1024x576"x119.9   98.50  1024 1092 1200 1376  576 577 580 597 doublescan -hsync +vsync (71.6 kHz d)
[   601.732] (II) modeset(0): Modeline "1024x576"x119.9   78.38  1024 1048 1064 1104  576 577 580 592 doublescan +hsync -vsync (71.0 kHz d)
[   601.732] (II) modeset(0): Modeline "1024x576"x59.9   46.50  1024 1064 1160 1296  576 579 584 599 -hsync +vsync (35.9 kHz d)
[   601.732] (II) modeset(0): Modeline "1024x576"x59.8   42.00  1024 1072 1104 1184  576 579 584 593 +hsync -vsync (35.5 kHz d)
[   601.732] (II) modeset(0): Modeline "960x600"x119.9   96.62  960 1028 1128 1296  600 601 604 622 doublescan -hsync +vsync (74.6 kHz d)
[   601.732] (II) modeset(0): Modeline "960x600"x120.0   77.00  960 984 1000 1040  600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[   601.732] (II) modeset(0): Modeline "960x540"x119.9   86.50  960 1024 1124 1288  540 541 544 560 doublescan -hsync +vsync (67.2 kHz d)
[   601.732] (II) modeset(0): Modeline "960x540"x120.0   69.25  960 984 1000 1040  540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[   601.732] (II) modeset(0): Modeline "960x540"x59.6   40.75  960 992 1088 1216  540 543 548 562 -hsync +vsync (33.5 kHz d)
[   601.732] (II) modeset(0): Modeline "960x540"x59.8   37.25  960 1008 1040 1120  540 543 548 556 +hsync -vsync (33.3 kHz d)
[   601.732] (II) modeset(0): Modeline "800x600"x120.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[   601.732] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[   601.732] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[   601.732] (II) modeset(0): Modeline "840x525"x120.0   73.12  840 892 980 1120  525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[   601.732] (II) modeset(0): Modeline "840x525"x119.8   59.50  840 864 880 920  525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[   601.732] (II) modeset(0): Modeline "864x486"x59.9   32.50  864 888 968 1072  486 489 494 506 -hsync +vsync (30.3 kHz d)
[   601.732] (II) modeset(0): Modeline "864x486"x59.6   30.50  864 912 944 1024  486 489 494 500 +hsync -vsync (29.8 kHz d)
[   601.732] (II) modeset(0): Modeline "800x512"x120.3   51.56  800 800 828 832  512 512 514 515 doublescan +hsync +vsync (62.0 kHz d)
[   601.732] (II) modeset(0): Modeline "700x525"x120.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[   601.732] (II) modeset(0): Modeline "800x450"x119.9   59.12  800 848 928 1056  450 451 454 467 doublescan -hsync +vsync (56.0 kHz d)
[   601.732] (II) modeset(0): Modeline "800x450"x119.6   48.75  800 824 840 880  450 451 454 463 doublescan +hsync -vsync (55.4 kHz d)
[   601.732] (II) modeset(0): Modeline "640x512"x120.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[   601.732] (II) modeset(0): Modeline "720x450"x119.8   53.25  720 760 836 952  450 451 454 467 doublescan -hsync +vsync (55.9 kHz d)
[   601.732] (II) modeset(0): Modeline "700x450"x119.9   51.75  700 740 812 924  450 451 456 467 doublescan -hsync +vsync (56.0 kHz d)
[   601.732] (II) modeset(0): Modeline "700x450"x119.8   43.25  700 724 740 780  450 451 456 463 doublescan +hsync -vsync (55.4 kHz d)
[   601.732] (II) modeset(0): Modeline "640x480"x120.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[   601.732] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[   601.732] (II) modeset(0): Modeline "720x405"x59.5   22.50  720 744 808 896  405 408 413 422 -hsync +vsync (25.1 kHz d)
[   601.732] (II) modeset(0): Modeline "720x405"x59.0   21.75  720 768 800 880  405 408 413 419 +hsync -vsync (24.7 kHz d)
[   601.732] (II) modeset(0): Modeline "684x384"x119.8   42.62  684 720 788 892  384 385 390 399 doublescan -hsync +vsync (47.8 kHz d)
[   601.732] (II) modeset(0): Modeline "684x384"x119.7   36.12  684 708 724 764  384 385 390 395 doublescan +hsync -vsync (47.3 kHz d)
[   601.732] (II) modeset(0): Modeline "680x384"x119.6   42.38  680 716 784 888  384 385 390 399 doublescan -hsync +vsync (47.7 kHz d)
[   601.732] (II) modeset(0): Modeline "680x384"x119.9   36.00  680 704 720 760  384 385 390 395 doublescan +hsync -vsync (47.4 kHz d)
[   601.732] (II) modeset(0): Modeline "640x400"x119.8   41.75  640 676 740 840  400 401 404 415 doublescan -hsync +vsync (49.7 kHz d)
[   601.732] (II) modeset(0): Modeline "640x400"x120.0   35.50  640 664 680 720  400 401 404 411 doublescan +hsync -vsync (49.3 kHz d)
[   601.732] (II) modeset(0): Modeline "576x432"x120.1   40.81  576 608 668 760  432 432 434 447 doublescan -hsync +vsync (53.7 kHz d)
[   601.732] (II) modeset(0): Modeline "640x360"x119.7   37.25  640 672 736 832  360 361 364 374 doublescan -hsync +vsync (44.8 kHz d)
[   601.732] (II) modeset(0): Modeline "640x360"x119.7   31.88  640 664 680 720  360 361 364 370 doublescan +hsync -vsync (44.3 kHz d)
[   601.732] (II) modeset(0): Modeline "640x360"x59.8   18.00  640 664 720 800  360 363 368 376 -hsync +vsync (22.5 kHz d)
[   601.732] (II) modeset(0): Modeline "640x360"x59.3   17.75  640 688 720 800  360 363 368 374 +hsync -vsync (22.2 kHz d)
[   601.732] (II) modeset(0): Modeline "512x384"x120.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[   601.732] (II) modeset(0): Modeline "512x288"x120.0   23.25  512 532 580 648  288 289 292 299 doublescan -hsync +vsync (35.9 kHz d)
[   601.732] (II) modeset(0): Modeline "512x288"x119.8   21.00  512 536 552 592  288 289 292 296 doublescan +hsync -vsync (35.5 kHz d)
[   601.732] (II) modeset(0): Modeline "480x270"x119.3   20.38  480 496 544 608  270 271 274 281 doublescan -hsync +vsync (33.5 kHz d)
[   601.732] (II) modeset(0): Modeline "480x270"x119.6   18.62  480 504 520 560  270 271 274 278 doublescan +hsync -vsync (33.3 kHz d)
[   601.732] (II) modeset(0): Modeline "400x300"x120.6   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[   601.732] (II) modeset(0): Modeline "400x300"x112.7   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[   601.732] (II) modeset(0): Modeline "432x243"x119.8   16.25  432 444 484 536  243 244 247 253 doublescan -hsync +vsync (30.3 kHz d)
[   601.732] (II) modeset(0): Modeline "432x243"x119.1   15.25  432 456 472 512  243 244 247 250 doublescan +hsync -vsync (29.8 kHz d)
[   601.732] (II) modeset(0): Modeline "320x240"x120.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[   601.732] (II) modeset(0): Modeline "360x202"x119.0   11.25  360 372 404 448  202 204 206 211 doublescan -hsync +vsync (25.1 kHz d)
[   601.732] (II) modeset(0): Modeline "360x202"x118.3   10.88  360 384 400 440  202 204 206 209 doublescan +hsync -vsync (24.7 kHz d)
[   601.732] (II) modeset(0): Modeline "320x180"x119.7    9.00  320 332 360 400  180 181 184 188 doublescan -hsync +vsync (22.5 kHz d)
[   601.732] (II) modeset(0): Modeline "320x180"x118.6    8.88  320 344 360 400  180 181 184 187 doublescan +hsync -vsync (22.2 kHz d)
[   601.732] (II) modeset(0): EDID for output DP-1
[   601.733] (II) modeset(0): EDID for output HDMI-1
[   601.735] (II) modeset(0): EDID for output HDMI-2
[   601.735] (II) modeset(0): Output eDP-1 connected
[   601.735] (II) modeset(0): Output DP-1 disconnected
[   601.735] (II) modeset(0): Output HDMI-1 disconnected
[   601.735] (II) modeset(0): Output HDMI-2 disconnected
[   601.735] (II) modeset(0): Using exact sizes for initial modes
[   601.735] (II) modeset(0): Output eDP-1 using initial mode 1366x768 +0+0
[   601.735] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[   601.735] (==) modeset(0): DPI set to (96, 96)
[   601.735] (II) Loading sub module "fb"
[   601.735] (II) LoadModule: "fb"
[   601.735] (II) Loading /usr/lib/xorg/modules/libfb.so
[   601.735] (II) Module fb: vendor="X.Org Foundation"
[   601.735]  compiled for 1.20.3, module version = 1.0.0
[   601.735]  ABI class: X.Org ANSI C Emulation, version 0.4
[   601.735] (II) UnloadModule: "fbdev"
[   601.735] (II) Unloading fbdev
[   601.735] (II) UnloadSubModule: "fbdevhw"
[   601.735] (II) Unloading fbdevhw
[   601.735] (II) UnloadModule: "vesa"
[   601.735] (II) Unloading vesa
[   601.737] (==) modeset(0): Backing store enabled
[   601.738] (==) modeset(0): Silken mouse enabled
[   601.780] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[   601.780] (==) modeset(0): DPMS enabled
[   601.780] (II) modeset(0): [DRI2] Setup complete
[   601.780] (II) modeset(0): [DRI2]   DRI driver: i965
[   601.780] (II) modeset(0): [DRI2]   VDPAU driver: i965
[   601.780] (II) Initializing extension Generic Event Extension
[   601.780] (II) Initializing extension SHAPE
[   601.781] (II) Initializing extension MIT-SHM
[   601.781] (II) Initializing extension XInputExtension
[   601.781] (II) Initializing extension XTEST
[   601.781] (II) Initializing extension BIG-REQUESTS
[   601.781] (II) Initializing extension SYNC
[   601.782] (II) Initializing extension XKEYBOARD
[   601.782] (II) Initializing extension XC-MISC
[   601.782] (II) Initializing extension SECURITY
[   601.782] (II) Initializing extension XFIXES
[   601.783] (II) Initializing extension RENDER
[   601.783] (II) Initializing extension RANDR
[   601.783] (II) Initializing extension COMPOSITE
[   601.783] (II) Initializing extension DAMAGE
[   601.783] (II) Initializing extension MIT-SCREEN-SAVER
[   601.784] (II) Initializing extension DOUBLE-BUFFER
[   601.784] (II) Initializing extension RECORD
[   601.784] (II) Initializing extension DPMS
[   601.784] (II) Initializing extension Present
[   601.784] (II) Initializing extension DRI3
[   601.785] (II) Initializing extension X-Resource
[   601.785] (II) Initializing extension XVideo
[   601.785] (II) Initializing extension XVideo-MotionCompensation
[   601.785] (II) Initializing extension SELinux
[   601.785] (II) SELinux: Disabled on system
[   601.785] (II) Initializing extension GLX
[   601.793] (II) AIGLX: Loaded and initialized i965
[   601.793] (II) GLX: Initialized DRI2 GL provider for screen 0
[   601.793] (II) Initializing extension XFree86-VidModeExtension
[   601.794] (II) Initializing extension XFree86-DGA
[   601.794] (II) Initializing extension XFree86-DRI
[   601.794] (II) Initializing extension DRI2
[   601.796] (II) modeset(0): Damage tracking initialized
[   601.796] (II) modeset(0): Setting screen physical size to 361 x 203
[   601.849] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[   601.849] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[   601.849] (II) LoadModule: "libinput"
[   601.849] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[   601.852] (II) Module libinput: vendor="X.Org Foundation"
[   601.852]  compiled for 1.20.3, module version = 0.28.2
[   601.852]  Module class: X.Org XInput Driver
[   601.852]  ABI class: X.Org XInput driver, version 24.1
[   601.852] (II) Using input driver 'libinput' for 'Power Button'
[   601.853] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 20 paused 0
[   601.853] (**) Power Button: always reports core events
[   601.853] (**) Option "Device" "/dev/input/event4"
[   601.853] (**) Option "_source" "server/udev"
[   601.854] (II) event4  - Power Button: is tagged by udev as: Keyboard
[   601.854] (II) event4  - Power Button: device is a keyboard
[   601.854] (II) event4  - Power Button: device removed
[   601.854] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input11/event4"
[   601.854] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[   601.854] (**) Option "xkb_model" "pc105"
[   601.854] (**) Option "xkb_layout" "fr"
[   601.854] (**) Option "xkb_variant" "latin9"
[   601.869] (II) event4  - Power Button: is tagged by udev as: Keyboard
[   601.869] (II) event4  - Power Button: device is a keyboard
[   601.870] (II) config/udev: Adding input device Asus Wireless Radio Control (/dev/input/event5)
[   601.870] (**) Asus Wireless Radio Control: Applying InputClass "libinput keyboard catchall"
[   601.870] (II) Using input driver 'libinput' for 'Asus Wireless Radio Control'
[   601.871] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 23 paused 0
[   601.871] (**) Asus Wireless Radio Control: always reports core events
[   601.871] (**) Option "Device" "/dev/input/event5"
[   601.871] (**) Option "_source" "server/udev"
[   601.871] (II) event5  - Asus Wireless Radio Control: is tagged by udev as: Keyboard
[   601.871] (II) event5  - Asus Wireless Radio Control: device is a keyboard
[   601.871] (II) event5  - Asus Wireless Radio Control: device removed
[   601.871] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/ATK4002:00/input/input12/event5"
[   601.871] (II) XINPUT: Adding extended input device "Asus Wireless Radio Control" (type: KEYBOARD, id 7)
[   601.871] (**) Option "xkb_model" "pc105"
[   601.871] (**) Option "xkb_layout" "fr"
[   601.871] (**) Option "xkb_variant" "latin9"
[   601.872] (II) event5  - Asus Wireless Radio Control: is tagged by udev as: Keyboard
[   601.872] (II) event5  - Asus Wireless Radio Control: device is a keyboard
[   601.872] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[   601.872] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[   601.872] (II) Using input driver 'libinput' for 'Video Bus'
[   601.873] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 24 paused 0
[   601.873] (**) Video Bus: always reports core events
[   601.873] (**) Option "Device" "/dev/input/event8"
[   601.873] (**) Option "_source" "server/udev"
[   601.874] (II) event8  - Video Bus: is tagged by udev as: Keyboard
[   601.874] (II) event8  - Video Bus: device is a keyboard
[   601.874] (II) event8  - Video Bus: device removed
[   601.874] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input15/event8"
[   601.874] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[   601.874] (**) Option "xkb_model" "pc105"
[   601.874] (**) Option "xkb_layout" "fr"
[   601.874] (**) Option "xkb_variant" "latin9"
[   601.875] (II) event8  - Video Bus: is tagged by udev as: Keyboard
[   601.875] (II) event8  - Video Bus: device is a keyboard
[   601.875] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[   601.875] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[   601.875] (II) Using input driver 'libinput' for 'Video Bus'
[   601.876] (II) systemd-logind: got fd for /dev/input/event9 13:73 fd 25 paused 0
[   601.876] (**) Video Bus: always reports core events
[   601.876] (**) Option "Device" "/dev/input/event9"
[   601.876] (**) Option "_source" "server/udev"
[   601.877] (II) event9  - Video Bus: is tagged by udev as: Keyboard
[   601.877] (II) event9  - Video Bus: device is a keyboard
[   601.877] (II) event9  - Video Bus: device removed
[   601.877] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2a/LNXVIDEO:01/input/input16/event9"
[   601.877] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 9)
[   601.877] (**) Option "xkb_model" "pc105"
[   601.877] (**) Option "xkb_layout" "fr"
[   601.877] (**) Option "xkb_variant" "latin9"
[   601.878] (II) event9  - Video Bus: is tagged by udev as: Keyboard
[   601.878] (II) event9  - Video Bus: device is a keyboard
[   601.878] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[   601.878] (II) No input driver specified, ignoring this device.
[   601.878] (II) This device may have been added with another device file.
[   601.879] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[   601.879] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[   601.879] (II) Using input driver 'libinput' for 'Sleep Button'
[   601.879] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 26 paused 0
[   601.879] (**) Sleep Button: always reports core events
[   601.879] (**) Option "Device" "/dev/input/event3"
[   601.879] (**) Option "_source" "server/udev"
[   601.880] (II) event3  - Sleep Button: is tagged by udev as: Keyboard
[   601.880] (II) event3  - Sleep Button: device is a keyboard
[   601.880] (II) event3  - Sleep Button: device removed
[   601.880] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input10/event3"
[   601.880] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[   601.880] (**) Option "xkb_model" "pc105"
[   601.880] (**) Option "xkb_layout" "fr"
[   601.880] (**) Option "xkb_variant" "latin9"
[   601.881] (II) event3  - Sleep Button: is tagged by udev as: Keyboard
[   601.881] (II) event3  - Sleep Button: device is a keyboard
[   601.882] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event11)
[   601.882] (II) No input driver specified, ignoring this device.
[   601.882] (II) This device may have been added with another device file.
[   601.882] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event12)
[   601.882] (II) No input driver specified, ignoring this device.
[   601.882] (II) This device may have been added with another device file.
[   601.882] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event13)
[   601.882] (II) No input driver specified, ignoring this device.
[   601.882] (II) This device may have been added with another device file.
[   601.883] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=9 (/dev/input/event14)
[   601.883] (II) No input driver specified, ignoring this device.
[   601.883] (II) This device may have been added with another device file.
[   601.883] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=10 (/dev/input/event15)
[   601.883] (II) No input driver specified, ignoring this device.
[   601.883] (II) This device may have been added with another device file.
[   601.884] (II) config/udev: Adding input device USB Camera: USB Camera (/dev/input/event16)
[   601.884] (**) USB Camera: USB Camera: Applying InputClass "libinput keyboard catchall"
[   601.884] (II) Using input driver 'libinput' for 'USB Camera: USB Camera'
[   601.885] (II) systemd-logind: got fd for /dev/input/event16 13:80 fd 27 paused 0
[   601.885] (**) USB Camera: USB Camera: always reports core events
[   601.885] (**) Option "Device" "/dev/input/event16"
[   601.885] (**) Option "_source" "server/udev"
[   601.886] (II) event16 - USB Camera: USB Camera: is tagged by udev as: Keyboard
[   601.886] (II) event16 - USB Camera: USB Camera: device is a keyboard
[   601.886] (II) event16 - USB Camera: USB Camera: device removed
[   601.886] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input23/event16"
[   601.886] (II) XINPUT: Adding extended input device "USB Camera: USB Camera" (type: KEYBOARD, id 11)
[   601.886] (**) Option "xkb_model" "pc105"
[   601.886] (**) Option "xkb_layout" "fr"
[   601.886] (**) Option "xkb_variant" "latin9"
[   601.887] (II) event16 - USB Camera: USB Camera: is tagged by udev as: Keyboard
[   601.887] (II) event16 - USB Camera: USB Camera: device is a keyboard
[   601.888] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event10)
[   601.888] (II) No input driver specified, ignoring this device.
[   601.888] (II) This device may have been added with another device file.
[   601.888] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event7)
[   601.888] (**) Asus WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[   601.888] (II) Using input driver 'libinput' for 'Asus WMI hotkeys'
[   601.889] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 28 paused 0
[   601.889] (**) Asus WMI hotkeys: always reports core events
[   601.889] (**) Option "Device" "/dev/input/event7"
[   601.889] (**) Option "_source" "server/udev"
[   601.890] (II) event7  - Asus WMI hotkeys: is tagged by udev as: Keyboard
[   601.890] (II) event7  - Asus WMI hotkeys: device is a keyboard
[   601.890] (II) event7  - Asus WMI hotkeys: device removed
[   601.890] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input14/event7"
[   601.890] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 12)
[   601.890] (**) Option "xkb_model" "pc105"
[   601.890] (**) Option "xkb_layout" "fr"
[   601.890] (**) Option "xkb_variant" "latin9"
[   601.891] (II) event7  - Asus WMI hotkeys: is tagged by udev as: Keyboard
[   601.891] (II) event7  - Asus WMI hotkeys: device is a keyboard
[   601.891] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[   601.891] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[   601.891] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[   601.892] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 29 paused 0
[   601.892] (**) AT Translated Set 2 keyboard: always reports core events
[   601.892] (**) Option "Device" "/dev/input/event0"
[   601.892] (**) Option "_source" "server/udev"
[   601.893] (II) event0  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[   601.893] (II) event0  - AT Translated Set 2 keyboard: device is a keyboard
[   601.893] (II) event0  - AT Translated Set 2 keyboard: device removed
[   601.893] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[   601.893] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[   601.893] (**) Option "xkb_model" "pc105"
[   601.893] (**) Option "xkb_layout" "fr"
[   601.893] (**) Option "xkb_variant" "latin9"
[   601.894] (II) event0  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[   601.894] (II) event0  - AT Translated Set 2 keyboard: device is a keyboard
[   601.894] (II) config/udev: Adding input device FocalTechPS/2 FocalTech Touchpad (/dev/input/event1)
[   601.894] (**) FocalTechPS/2 FocalTech Touchpad: Applying InputClass "libinput touchpad catchall"
[   601.894] (II) Using input driver 'libinput' for 'FocalTechPS/2 FocalTech Touchpad'
[   601.895] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 30 paused 0
[   601.895] (**) FocalTechPS/2 FocalTech Touchpad: always reports core events
[   601.895] (**) Option "Device" "/dev/input/event1"
[   601.895] (**) Option "_source" "server/udev"
[   601.896] (II) event1  - FocalTechPS/2 FocalTech Touchpad: is tagged by udev as: Touchpad
[   601.896] (II) event1  - FocalTechPS/2 FocalTech Touchpad: no resolution or size hints, assuming a size of 69x50mm
[   601.897] (II) event1  - FocalTechPS/2 FocalTech Touchpad: device is a touchpad
[   601.897] (II) event1  - FocalTechPS/2 FocalTech Touchpad: device removed
[   601.897] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input8/event1"
[   601.897] (II) XINPUT: Adding extended input device "FocalTechPS/2 FocalTech Touchpad" (type: TOUCHPAD, id 14)
[   601.898] (**) Option "AccelerationScheme" "none"
[   601.898] (**) FocalTechPS/2 FocalTech Touchpad: (accel) selected scheme none/0
[   601.898] (**) FocalTechPS/2 FocalTech Touchpad: (accel) acceleration factor: 2.000
[   601.898] (**) FocalTechPS/2 FocalTech Touchpad: (accel) acceleration threshold: 4
[   601.898] (II) event1  - FocalTechPS/2 FocalTech Touchpad: is tagged by udev as: Touchpad
[   601.899] (II) event1  - FocalTechPS/2 FocalTech Touchpad: no resolution or size hints, assuming a size of 69x50mm
[   601.899] (II) event1  - FocalTechPS/2 FocalTech Touchpad: device is a touchpad
[   601.900] (II) config/udev: Adding input device FocalTechPS/2 FocalTech Touchpad (/dev/input/mouse0)
[   601.900] (II) No input driver specified, ignoring this device.
[   601.900] (II) This device may have been added with another device file.
[   601.900] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[   601.900] (II) No input driver specified, ignoring this device.
[   601.900] (II) This device may have been added with another device file.
[   606.806] (II) modeset(0): EDID vendor "SDC", prod id 13642
[   606.806] (II) modeset(0): Printing DDC gathered Modelines:
[   606.806] (II) modeset(0): Modeline "1366x768"x0.0   69.39  1366 1414 1446 1464  768 770 775 790 -hsync -vsync (47.4 kHz eP)
[   683.550] (EE) client bug: timer event1 gestures: offset negative (-592ms)



glxinfo -B


name of display: :0
display: :0  screen: 0
direct rendering: Yes
Extended renderer info (GLX_MESA_query_renderer):
    Vendor: Intel Open Source Technology Center (0x8086)
    Device: Mesa DRI Intel(R) HD Graphics 5500 (Broadwell GT2)  (0x1616)
    Version: 18.3.4
    Accelerated: yes
    Video memory: 3072MB
    Unified memory: yes
    Preferred profile: core (0x1)
    Max core profile version: 4.5
    Max compat profile version: 3.0
    Max GLES1 profile version: 1.1
    Max GLES[23] profile version: 3.1
OpenGL vendor string: Intel Open Source Technology Center
OpenGL renderer string: Mesa DRI Intel(R) HD Graphics 5500 (Broadwell GT2)
OpenGL core profile version string: 4.5 (Core Profile) Mesa 18.3.4
OpenGL core profile shading language version string: 4.50
OpenGL core profile context flags: (none)
OpenGL core profile profile mask: core profile

OpenGL version string: 3.0 Mesa 18.3.4
OpenGL shading language version string: 1.30
OpenGL context flags: (none)

OpenGL ES profile version string: OpenGL ES 3.1 Mesa 18.3.4
OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.10
 

Hors ligne

#49 26-03-2019 12:00:42

anonyme
Invité

Re : écran noir après reboot

Bonjour
le retour du #48 au dessus est correct , la carte intel fonctionne bien
ton gestionnaire de connexion fonctionne correctement ?  user + mdp et tu a le bureau ?
si oui il reste plus qu'a installer bumblebee-nvidia pour prendre en charge ton gpu nvidia et èviter cet ècran noir au démarrage de la machine.

en #50 je te donne comment installer bumblebee-nvidia
tu peu poster le retour du log d'installation de bumblebee-nvidia si problème

Dernière modification par anonyme (26-03-2019 12:39:51)

#50 26-03-2019 12:35:44

anonyme
Invité

Re : écran noir après reboot

installation des méta-paquets du noyau


apt-get --reinstall install linux-image-amd64 linux-headers-amd64
 


un reboot


reboot
 


installation du driver propriétaire avec bumblebee-nvidia
en simulation uniquement


apt-get -s install bumblebee-nvidia primus nvidia-driver libgl1-nvidia-glx
 


installer


apt-get install bumblebee-nvidia primus nvidia-driver libgl1-nvidia-glx
 


si tu peu copier le retour de la console dans un fichier (pour vérifier si correct )
normalement un paquet nvidia-persistenced a retirer qui pose problème sur buster avec bumblebee-nvidia


apt-get remove --purge nvidia-persistenced
 



adduser "tonuser" bumblebee
 


nota: "tonuser" a remplacé par le nom d'utilisateur de ta connexion au bureau
un reboot


reboot
 


test des commandes "glxinfo -B" (pour intel) et  "optirun glxinfo -B" (pour nvidia )
a faire en user , pas en root
pour tester la carte intel


glxinfo -B
 


pour tester la carte nvidia


optirun glxinfo -B
 


ouvrir firefox avec la carte nvidia


optirun firefox
 

Pied de page des forums