Debian Debian-France Debian-Facile Debian-fr.org Forum-Debian.fr Debian ? Communautés

Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#26 29-06-2022 11:50:17

ylag
Membre
Inscription : 16-03-2020

Re : Pilote pour Imprimante Ricoh Aficio SP 1000S (RESOLU)

...

Dernière modification par ylag (29-06-2022 11:50:51)

Hors ligne

#27 29-06-2022 13:38:42

èfpé
Membre
Inscription : 10-07-2016

Re : Pilote pour Imprimante Ricoh Aficio SP 1000S (RESOLU)

Re-,

ylag a écrit :

Le PPA en question n'a pas de section active pour Kinetic 22.10, qui est actuellement la version de développement pour Ubuntu, [...]


La configuration résulte de l'utilisation de la commande add-apt-repository (ou apt-add-repository).

Et, contrairement à ce qui est annoncé dans le man, la clé publique n'est pas ajoutée au trousseau.
Lire à ce sujet le rapport de bogue #1012649 du 11 juin 2022. Le #1012872 est pertinent aussi ;).

Dernière modification par èfpé (29-06-2022 14:58:42)

Hors ligne

#28 29-06-2022 15:29:20

ylag
Membre
Inscription : 16-03-2020

Re : Pilote pour Imprimante Ricoh Aficio SP 1000S (RESOLU)

Bonjour,

Peut-être pas réellement pertinent, mais pour info, voici ce qui se passe si j'essaie d'ajouter le PPA sane-project/sane-git sur ma Bullseye via la commande add-apt-repository :

root@yvan-maison:/# add-apt-repository ppa:sane-project/sane-git
 Ubuntu SANE packages from SANE daily git snapshots (http://www.sane-project.org/snapshots/).

Unchanged SANE daily git snapshots are ignored!

Please send scanner related questions to the SANE mailing list:
sane-devel at alioth-lists dot debian dot net.

If you need the last released scanner driver, you can use our other PPA: https://launchpad.net/~sane-project/+archive/ubuntu/sane-release.
 More info: https://launchpad.net/~sane-project/+archive/ubuntu/sane-git
Press [ENTER] to continue or ctrl-c to cancel adding it

gpg: le trousseau local « /tmp/tmp3h8t_xk3/pubring.gpg » a été créé
gpg: /tmp/tmp3h8t_xk3/trustdb.gpg : base de confiance créée
gpg: clef DDEAC554C101175B : clef publique « Launchpad PPA for sane-project » importée
gpg:       Quantité totale traitée : 1
gpg:                     importées : 1
Warning: apt-key is deprecated. Manage keyring files in trusted.gpg.d instead (see apt-key(8)).
gpg: aucune donnée OpenPGP valable n'a été trouvée.
Exception in thread Thread-1:
Traceback (most recent call last):
  File "/usr/lib/python3.9/threading.py", line 954, in _bootstrap_inner
    self.run()
  File "/usr/lib/python3.9/threading.py", line 892, in run
    self._target(*self._args, **self._kwargs)
  File "/usr/lib/python3/dist-packages/softwareproperties/SoftwareProperties.py", line 688, in addkey_func
    func(**kwargs)
  File "/usr/lib/python3/dist-packages/softwareproperties/ppa.py", line 386, in add_key
    return apsk.add_ppa_signing_key()
  File "/usr/lib/python3/dist-packages/softwareproperties/ppa.py", line 273, in add_ppa_signing_key
    cleanup(tmp_keyring_dir)
  File "/usr/lib/python3/dist-packages/softwareproperties/ppa.py", line 234, in cleanup
    shutil.rmtree(tmp_keyring_dir)
  File "/usr/lib/python3.9/shutil.py", line 718, in rmtree
    _rmtree_safe_fd(fd, path, onerror)
  File "/usr/lib/python3.9/shutil.py", line 675, in _rmtree_safe_fd
    onerror(os.unlink, fullname, sys.exc_info())
  File "/usr/lib/python3.9/shutil.py", line 673, in _rmtree_safe_fd
    os.unlink(entry.name, dir_fd=topfd)
FileNotFoundError: [Errno 2] Aucun fichier ou dossier de ce type: 'S.gpg-agent.ssh'
root@yvan-maison:/#


La clé d'authentification ne semble pas s'installer normalement ?


Un fichier sane-project-ubuntu-sane-git-kinetic.list est bien créé dans /etc/apt/sources.list.d, dont le contenu est :

deb http://ppa.launchpad.net/sane-project/sane-git/ubuntu kinetic main
# deb-src http://ppa.launchpad.net/sane-project/sane-git/ubuntu kinetic main



Une tentative de mise à jour subséquente donne ceci :

root@yvan-maison:/# apt update
Atteint :1 http://deb.debian.org/debian bullseye InRelease
Atteint :2 http://security.debian.org/debian-security bullseye-security InRelease                  
Atteint :3 http://dl.google.com/linux/chrome/deb stable InRelease                                  
Atteint :4 http://deb.debian.org/debian bullseye-updates InRelease                                
Atteint :5 http://deb.debian.org/debian bullseye-backports InRelease  
Ign :6 http://ppa.launchpad.net/sane-project/sane-git/ubuntu kinetic InRelease
Err :7 http://ppa.launchpad.net/sane-project/sane-git/ubuntu kinetic Release
  404  Not Found [IP : 185.125.190.52 80]
Lecture des listes de paquets... Fait
E: Le dépôt http://ppa.launchpad.net/sane-project/sane-git/ubuntu kinetic Release n'a pas de fichier Release.
N: Les mises à jour depuis un tel dépôt ne peuvent s'effectuer de manière sécurisée, et sont donc désactivées par défaut.
N: Voir les pages de manuel d'apt-secure(8) pour la création des dépôts et les détails de configuration d'un utilisateur.
root@yvan-maison:/#


On voit que le dépôt supposément ajouté est injoignable, faute d'exister sur le site du PPA : http://ppa.launchpad.net/sane-project/s … ntu/dists/, pas de kinetic dans la liste !

A+

Dernière modification par ylag (29-06-2022 15:33:49)

Hors ligne

#29 29-06-2022 15:46:42

èfpé
Membre
Inscription : 10-07-2016

Re : Pilote pour Imprimante Ricoh Aficio SP 1000S (RESOLU)

Re-,

ylag a écrit :

add-apt-repository ppa:sane-project/sane-git

...
gpg: le trousseau local « /tmp/tmp3h8t_xk3/pubring.gpg » a été créé
gpg: /tmp/tmp3h8t_xk3/trustdb.gpg : base de confiance créée
gpg: clef DDEAC554C101175B : clef publique « Launchpad PPA for sane-project » importée
gpg:       Quantité totale traitée : 1
gpg:                     importées : 1
Warning: apt-key is deprecated. Manage keyring files in trusted.gpg.d instead (see apt-key(8)).
gpg: aucune donnée OpenPGP valable n'a été trouvée.
...


La clé d'authentification ne semble pas s'installer normalement ?


Non : 'aucune donnée OpenPGP valable'. Tu verras une autre erreur si tu changes pour focal par ex.

Dernière modification par èfpé (29-06-2022 15:50:42)

Hors ligne

#30 29-06-2022 16:15:53

Croutons
Membre
Distrib. : Debian10 Buster
Noyau : Linux 4.19.0-18-amd64
(G)UI : Mate
Inscription : 16-12-2016

Re : Pilote pour Imprimante Ricoh Aficio SP 1000S (RESOLU)

pour en revenir au sujet je pense que vu que le scanner est bien vu , il serait intéressant de voir le message d'erreur du terminale

xsane


voir au niveau du panneau de contrôle de l'imprimante si il y a pas de message d'erreur
les fabriquants bloque l’accès au scanner si l'imprimante n'est pas disponible (plus d'encre ou autre message d'erreur )
dans ce cas l'application de numérisation renvoi un message comme quoi l'imprimante est busy, pour rendre le scanner opérationnel il faut pouvoir effacer tout message d'erreur sur l'imprimante


-->les cahiers du debutant<--      WikiDF-->Découvrir les principales commandes Linux<--
L' expérience, c'est le nom que chacun donne à ses erreurs. Oscar Wilde

En ligne

#31 29-06-2022 17:16:43

èfpé
Membre
Inscription : 10-07-2016

Re : Pilote pour Imprimante Ricoh Aficio SP 1000S (RESOLU)

Re-,

Croutons a écrit :

pour en revenir au sujet je pense que vu que le scanner est bien vu, il serait intéressant de [...]


@Croutons : pourquoi ne pas en parler sur le fil dédié ? et si le scanner est vu il n'est pas supporté.

Hors ligne

#32 29-06-2022 22:08:32

zemog
Membre
Distrib. : Débian Bullseye (11)
Noyau : Linux 5.10.0.9 amd64
(G)UI : gnome 3.38.5
Inscription : 09-07-2017

Re : Pilote pour Imprimante Ricoh Aficio SP 1000S (RESOLU)

Bonsoir à vous tous,

voici ci-dessous les résultats de vos différentes commandes que j'ai testées (évidemment il y a de la ligne crachée, et pour l'heure pas de résultat tangible) :

saisie de la commande en user : cd /etc/apt/sources.list.d && rm -v sane-project-ubuntu-sane-git-kinetic.list
voici le retour
root@zemogcoolermaster:~# cd /etc/apt/sources.list.d && rm -v sane-project-ubuntu-sane-git-kinetic.list
'sane-project-ubuntu-sane-git-kinetic.list' supprimé
root@zemogcoolermaster:/etc/apt/sources.list.d#




saisie de la commande en user : apt list --installed xsane sane
voici le retour
zemog@zemogcoolermaster:~$ apt list --installed xsane sane
En train de lister... Fait
xsane/stable,now 0.999-10 amd64  [installé]

saisie de la commande en user : apt-cache show xsane
voici le retour
zemog@zemogcoolermaster:~$ apt-cache show xsane
Package: xsane
Version: 0.999-10
Installed-Size: 2346
Maintainer: Jörg Frings-Fürst <debian@jff.email>
Architecture: amd64
Replaces: xsane-common (<< 0.999-10~)
Depends: libc6 (>= 2.29), libgimp2.0 (>= 2.4.0), libglib2.0-0 (>= 2.12.0), libgtk2.0-0 (>= 2.14.0), libjpeg62-turbo (>= 1.3.1), liblcms2-2 (>= 2.2+git20110628), libpng16-16 (>= 1.6.2-1), libsane1 (>= 1.0.27), libtiff5 (>= 4.0.3), zlib1g (>= 1:1.1.4), sensible-utils, xsane-common (= 0.999-10)
Recommends: cups-client, firefox | www-browser
Suggests: gimp, gocr | cuneiform | tesseract-ocr | ocrad, gv, hylafax-client | mgetty-fax
Breaks: xsane-common (<< 0.999-10~)
Description-fr: interface graphique complète pour le programme de gestion de scanners SANE
Le programme xsane peut être lancé comme programme seul ou par le
programme de manipulation d'images GIMP. Dans le mode seul, xsane
peut sauvegarder une image dans un fichier avec différents formats,
servir d'interface à un programme de fax ou envoyer une image à une
imprimante.
.
SANE signifie « Scanner Access Now Easy » (accès au scanner maintenant
facile) et est une interface de programmation pour une application (API ;
application programming interface) qui fournit un accès standardisé à tout
matériel de numérisation d'image (scanner à plat, à main, vidéo et caméra
fixe, frame-grabbers, etc.). Le standard SANE est libre et ses discussion
ou développement sont libres pour tout le monde. Le code source courant
est écrit pour supporter plusieurs systèmes d'exploitation, incluant
GNU/Linux, OS/2, Win32, ainsi que diverses versions d'Unix et est
disponible sous la GNU General Public License (les applications
commerciales et utilitaires sont aussi, néanmoins, les bienvenus).
Description-md5: 0f073896563cfffa695f69e298c230d0
Multi-Arch: foreign
Tag: interface::graphical, interface::x11, role::program, scope::application,
uitoolkit::gtk, works-with::image, works-with::image:raster,
x11::application
Section: graphics
Priority: optional
Filename: pool/main/x/xsane/xsane_0.999-10_amd64.deb
Size: 532224
MD5sum: bd5903dcde23ab47b973099ecaf7b9a2
SHA256: 67b8d2d0c0df32c9077437aef43c330cdfe2284c35bbcc0ddb3131e3a408f591





saisie de la commande en user : apt-cache show sane
voici le retour
zemog@zemogcoolermaster:~$ apt-cache show sane
Package: sane
Source: sane-frontends
Version: 1.0.14-16
Installed-Size: 424
Maintainer: Jörg Frings-Fürst <debian@jff.email>
Architecture: amd64
Depends: libc6 (>= 2.14), libgimp2.0 (>= 2.4.0), libglib2.0-0 (>= 2.12.0), libgtk2.0-0 (>= 2.24.0), libsane (>= 1.0.24)
Suggests: gimp
Description-fr: Interfaces graphiques pour scanner
Ce paquet inclut :
  - xscanimage, une interface graphique pour scanner avec le support pour
     GIMP 2.0 ;
  - scanadf, une interface en ligne de commande pour les numériseurs avec
     un chargeur automatique de documents ;
  - xcam, pour faire l'acquisition continue d'images à partir de caméras.
.
Une alternative à xscanimage appelée xsane est empaquetée séparément.
.
Les interfaces de numérisation utilisent SANE. SANE signifie « Scanner
Access Now Easy » (accès au scanner maintenant facile) et est une
interface de programmation pour une application (API ; application
programming interface) qui fournit un accès standardisé à tout matériel de
numérisation d'image (scanner à plat, à main, vidéo et caméra fixe, frame-
grabbers, etc.). Le standard SANE est libre et ses discussion ou
développement sont libres pour tout le monde. Le code source courant
est écrit pour supporter plusieurs systèmes d'exploitation, incluant
GNU/Linux, OS/2, Win32, ainsi que diverses versions d'Unix et est
disponible sous la Licence Publique Générale de GNU (les applications
commerciales et utilitaires sont aussi, néanmoins, les bienvenues).
Description-md5: 2f448d14f906e21875602c8f002bcd5d
Homepage: http://www.sane-project.org
Tag: interface::graphical, interface::x11, role::program, scope::application,
uitoolkit::gtk, use::downloading, works-with::image,
works-with::image:raster, x11::application
Section: graphics
Priority: optional
Filename: pool/main/s/sane-frontends/sane_1.0.14-16_amd64.deb
Size: 98676
MD5sum: 9a109ca1c6cef006e71d2ac2f1095403
SHA256: 04797a756817da258d4fde2dc01dc0640bbf23193b12454d1b53495fddb1e4a2

saisie de la commande en user : grep -Ev "^#|^$" /etc/apt/sources.list.d/*
voici le retour
zemog@zemogcoolermaster:~$ grep -Ev "^#|^$" /etc/apt/sources.list.d/*
grep: /etc/apt/sources.list.d/*: Aucun fichier ou dossier de ce type



saisie de la commande en user : grep -Ev "^#|^$" /etc/apt/sources.list{,.d/*.list}
voici le retour
zemog@zemogcoolermaster:~$ grep -Ev "^#|^$" /etc/apt/sources.list{,.d/*.list}
/etc/apt/sources.list:deb http://deb.debian.org/debian/ bullseye main contrib non-free
/etc/apt/sources.list:deb-src http://deb.debian.org/debian/ bullseye main contrib non-free
/etc/apt/sources.list:deb http://security.debian.org/debian-security bullseye-security main contrib non-free
/etc/apt/sources.list:deb-src http://security.debian.org/debian-security bullseye-security main contrib non-free
/etc/apt/sources.list:deb http://deb.debian.org/debian/ bullseye-updates main contrib non-free
/etc/apt/sources.list:deb-src http://deb.debian.org/debian/ bullseye-updates main contrib non-free
grep: /etc/apt/sources.list.d/*.list: Aucun fichier ou dossier de ce type

saisie de la commande en user : scanimage -L
voici le retour  (le scanner /imprimante étant bien sur connecté et allumé)
emog@zemogcoolermaster:~$ scanimage -L
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).

Candide dans ce domaine mais plein de bonne volonté.

Hors ligne

#33 29-06-2022 22:12:11

zemog
Membre
Distrib. : Débian Bullseye (11)
Noyau : Linux 5.10.0.9 amd64
(G)UI : gnome 3.38.5
Inscription : 09-07-2017

Re : Pilote pour Imprimante Ricoh Aficio SP 1000S (RESOLU)

Derniers tests effectués : lancement des 2 applications
gscan2pdf et xsane ne trouvent pas le scanner

Candide dans ce domaine mais plein de bonne volonté.

Hors ligne

#34 29-06-2022 23:18:35

gtalbot
Invité

Re : Pilote pour Imprimante Ricoh Aficio SP 1000S (RESOLU)

zemog a écrit :


(...)

$ apt list --installed xsane sane
En train de lister... Fait
xsane/stable,now 0.999-10 amd64  [installé]



Emilio,

Ça veut dire que le paquet sane n'est pas installé. Donc,

fais la commande

apt update && apt install sane



et, s'il-te-plaît, donnes-nous le retour de cette commande.

Autres questions.

As-tu installé system-config-printer ? voir #10

Que te donnes cupsctl ? Que te donnes http://localhost:631/printers ? voir #3

Ces 3 commandes devraient fonctionner pour toi sans problème.
Et tu ne devrais avoir aucun message d'erreur ou d'avertissement
quand tu mets à jour ton système.

Gérard

#35 30-06-2022 16:27:32

zemog
Membre
Distrib. : Débian Bullseye (11)
Noyau : Linux 5.10.0.9 amd64
(G)UI : gnome 3.38.5
Inscription : 09-07-2017

Re : Pilote pour Imprimante Ricoh Aficio SP 1000S (RESOLU)

pour éfpè et pour croutons et gtalbot

voici toutes les opérations demandées et les retours qui vont avec. En tout cas pour l'instant ça ne fonctionne pas.zen.gifcrash.gif


root@zemogcoolermaster:~# lsusb -vd 079b:005f

Bus 001 Device 002: ID 079b:005f Sagem Laser Pro LL
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  idVendor           0x079b Sagem
  idProduct          0x005f
  bcdDevice            1.00
  iManufacturer           1 MFPrinter
  iProduct                2 Laser Pro LL
  iSerial                 3 L507085L8306276
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength       0x0065
    bNumInterfaces          3
    bConfigurationValue     1
    iConfiguration          4 Configuration
    bmAttributes         0xc0
      Self Powered
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass         7 Printer
      bInterfaceSubClass      1 Printer
      bInterfaceProtocol      2 Bidirectional
      iInterface              5 Printer
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       1
      bNumEndpoints           1
      bInterfaceClass         7 Printer
      bInterfaceSubClass      1 Printer
      bInterfaceProtocol      1 Unidirectional
      iInterface              5 Printer
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        1
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass      0
      bInterfaceProtocol      0
      iInterface              6 MF F@X activities
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        2
      bAlternateSetting       0
      bNumEndpoints           3
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass      1
      bInterfaceProtocol      0
      iInterface              7 XML interface
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x03  EP 3 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x83  EP 3 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x84  EP 4 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
can't get device qualifier: Resource temporarily unavailable
can't get debug descriptor: Resource temporarily unavailable
Device Status:     0x0001
  Self Powered
root@zemogcoolermaster:~# exit
déconnexion
zemog@zemogcoolermaster:~$ xsane
Gtk-Message: 16:05:29.795: Failed to load module "canberra-gtk-module"
zemog@zemogcoolermaster:~$ su -
Mot de passe :
root@zemogcoolermaster:~# apt update && apt install sane
Atteint :1 http://deb.debian.org/debian bullseye InRelease
Atteint :2 http://deb.debian.org/debian bullseye-updates InRelease
Atteint :3 http://security.debian.org/debian-security bullseye-security InRelease
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances... Fait
Lecture des informations d'état... Fait     
Tous les paquets sont à jour.
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances... Fait
Lecture des informations d'état... Fait     
Les NOUVEAUX paquets suivants seront installés :
  sane
0 mis à jour, 1 nouvellement installés, 0 à enlever et 0 non mis à jour.
Il est nécessaire de prendre 98,7 ko dans les archives.
Après cette opération, 434 ko d'espace disque supplémentaires seront utilisés.
Réception de :1 http://deb.debian.org/debian bullseye/main amd64 sane amd64 1.0.14-16 [98,7 kB]
98,7 ko réceptionnés en 0s (3408 ko/s)
Sélection du paquet sane précédemment désélectionné.
(Lecture de la base de données... 172941 fichiers et répertoires déjà installés.)
Préparation du dépaquetage de .../sane_1.0.14-16_amd64.deb ...
Dépaquetage de sane (1.0.14-16) ...
Paramétrage de sane (1.0.14-16) ...
Traitement des actions différées (« triggers ») pour man-db (2.9.4-2) ...
root@zemogcoolermaster:~# apt update && apt install system-config-printer
Atteint :1 http://deb.debian.org/debian bullseye InRelease
Atteint :2 http://deb.debian.org/debian bullseye-updates InRelease
Atteint :3 http://security.debian.org/debian-security bullseye-security InRelease
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances... Fait
Lecture des informations d'état... Fait     
Tous les paquets sont à jour.
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances... Fait
Lecture des informations d'état... Fait     
Les NOUVEAUX paquets suivants seront installés :
  system-config-printer
0 mis à jour, 1 nouvellement installés, 0 à enlever et 0 non mis à jour.
Il est nécessaire de prendre 181 ko dans les archives.
Après cette opération, 1043 ko d'espace disque supplémentaires seront utilisés.
Réception de :1 http://deb.debian.org/debian bullseye/main amd64 system-config-printer all 1.5.14-1 [181 kB]
181 ko réceptionnés en 0s (5877 ko/s)   
Sélection du paquet system-config-printer précédemment désélectionné.
(Lecture de la base de données... 172960 fichiers et répertoires déjà installés.)
Préparation du dépaquetage de .../system-config-printer_1.5.14-1_all.deb ...
Dépaquetage de system-config-printer (1.5.14-1) ...
Paramétrage de system-config-printer (1.5.14-1) ...
Traitement des actions différées (« triggers ») pour desktop-file-utils (0.26-1) ...
Traitement des actions différées (« triggers ») pour gnome-menus (3.36.0-1) ...
Traitement des actions différées (« triggers ») pour man-db (2.9.4-2) ...
Traitement des actions différées (« triggers ») pour mailcap (3.69) ...
root@zemogcoolermaster:~# exit
déconnexion
zemog@zemogcoolermaster:~$ apt list --installed system-config-printer
En train de lister... Fait
system-config-printer/stable,now 1.5.14-1 all  [installé]
zemog@zemogcoolermaster:~$ ^C
zemog@zemogcoolermaster:~$ cupsctl
bash: cupsctl : commande introuvable
zemog@zemogcoolermaster:~$ su -
Mot de passe :
root@zemogcoolermaster:~# cupsctl
_debug_logging=0
_remote_admin=0
_remote_any=0
_share_printers=0
_user_cancel_any=0
BrowseLocalProtocols=dnssd
DefaultAuthType=Basic
ErrorPolicy=retry-job
JobPrivateAccess=default
JobPrivateValues=default
MaxLogSize=0
PageLogFormat=
SubscriptionPrivateAccess=default
SubscriptionPrivateValues=default
WebInterface=Yes
root@zemogcoolermaster:~# xsane

(xsane:8997): Gtk-WARNING **: 16:21:55.288: cannot open display:
root@zemogcoolermaster:~# exit
déconnexion
zemog@zemogcoolermaster:~$ xsane
Gtk-Message: 16:22:10.569: Failed to load module "canberra-gtk-module"

Candide dans ce domaine mais plein de bonne volonté.

Hors ligne

#36 30-06-2022 17:28:12

ylag
Membre
Inscription : 16-03-2020

Re : Pilote pour Imprimante Ricoh Aficio SP 1000S (RESOLU)

Bonjour,

Vu au #35 :

root@zemogcoolermaster:~# xsane

(xsane:8997): Gtk-WARNING **: 16:21:55.288: cannot open display:
root@zemogcoolermaster:~#


Pas une bonne idée que de lancer une application graphique telle que Xsane dans un shell «root», ça risque d'altérer les droits/permissions de la config de xsane dans ton répertoire utilisateur, amha...

As-tu obtenu l'ouverture normale de xsane lors de cette tentative à partir de ton compte utilisateur «zemog» :

zemog@zemogcoolermaster:~$ xsane
Gtk-Message: 16:22:10.569: Failed to load module "canberra-gtk-module"


...le message Gtk concernant le module canberra-gtk-module peut être ignoré, ça ne concerne que la création de sons système dans l'application xsane.

A+

Dernière modification par ylag (30-06-2022 21:44:20)

Hors ligne

#37 30-06-2022 17:41:36

zemog
Membre
Distrib. : Débian Bullseye (11)
Noyau : Linux 5.10.0.9 amd64
(G)UI : gnome 3.38.5
Inscription : 09-07-2017

Re : Pilote pour Imprimante Ricoh Aficio SP 1000S (RESOLU)

En réponse à la demande de ylag.

Non, j'ai essayé en simple utilisateur et le résultat est le même. Une fenêtre s'ouvre et me dit qu'aucun périphérique n'est disponible. En clair comme en foncé le scanner n'est pas là

Candide dans ce domaine mais plein de bonne volonté.

Hors ligne

#38 30-06-2022 17:42:47

zemog
Membre
Distrib. : Débian Bullseye (11)
Noyau : Linux 5.10.0.9 amd64
(G)UI : gnome 3.38.5
Inscription : 09-07-2017

Re : Pilote pour Imprimante Ricoh Aficio SP 1000S (RESOLU)

Comment savoir s'il faut passer en root ou en user pour une commande donnée??????

Candide dans ce domaine mais plein de bonne volonté.

Hors ligne

#39 30-06-2022 19:15:46

phreg
Membre
Distrib. : MX Manjaro Ubuntu
Noyau : 4.9 à 5.10
(G)UI : Xfce
Inscription : 02-04-2011

Re : Pilote pour Imprimante Ricoh Aficio SP 1000S (RESOLU)

Bonjour,
je n'ai pas tout lu, mais as tu le droit d'utiliser un scanner ? Pour vérifier, lance dans un terminal :

groups


et donne la sortie. Tu devrais trouver "scanner" dans la liste. Bien sûr, c'est inutile si un autre scanner fonctionne sur cette installation.

Hors ligne

#40 30-06-2022 19:30:54

Croutons
Membre
Distrib. : Debian10 Buster
Noyau : Linux 4.19.0-18-amd64
(G)UI : Mate
Inscription : 16-12-2016

Re : Pilote pour Imprimante Ricoh Aficio SP 1000S (RESOLU)

zemog a écrit :

Non, j'ai essayé en simple utilisateur et le résultat est le même. Une fenêtre s'ouvre et me dit qu'aucun périphérique n'est disponible


donc on n'a pas toute les lignes du terminale

Dernière modification par Croutons (30-06-2022 19:31:41)


-->les cahiers du debutant<--      WikiDF-->Découvrir les principales commandes Linux<--
L' expérience, c'est le nom que chacun donne à ses erreurs. Oscar Wilde

En ligne

#41 30-06-2022 22:46:42

èfpé
Membre
Inscription : 10-07-2016

Re : Pilote pour Imprimante Ricoh Aficio SP 1000S (RESOLU)

Re-,

en #32, zemog a écrit :

scanimage -L

No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).


La commande sane-find-scanner détecte un scanner USB ; celle-ci montre qu'il n'a pas de backend.
Les backends (pilotes) sont fournis par le paquet libsane1. Installer des GUI ne fera pas de miracle.

Le site sane-project.org liste les scanners pris en charge. Je tenterai une proposition sur le fil dédié.

Hors ligne

#42 01-07-2022 11:50:08

ylag
Membre
Inscription : 16-03-2020

Re : Pilote pour Imprimante Ricoh Aficio SP 1000S (RESOLU)

Bonjour,

èfpé a écrit :

Re-,
...
Le site sane-project.org liste les scanners pris en charge. Je tenterai une proposition sur le fil dédié.


Sous toute réserve, il faudrait le «backend» ricoh2 pour un tel appareil ?

A+

Hors ligne

#43 01-07-2022 12:46:43

èfpé
Membre
Inscription : 10-07-2016

Re : Pilote pour Imprimante Ricoh Aficio SP 1000S (RESOLU)

Re-,

ylag a écrit :

Sous toute réserve, il faudrait le «backend» ricoh2 pour un tel appareil ?


Le scanner d'identifiants 079b:005f n'est pas listé. Il ne faut pas s'arrêter au nom du constructeur :

SANE_DEBUG_DLL=4 scanimage -L


Montre d'ailleurs tous les backends tentés. Le débogage est sélectif avec SANE_DEBUG_RICOH2=4.

Hors ligne

#44 01-07-2022 13:22:54

Croutons
Membre
Distrib. : Debian10 Buster
Noyau : Linux 4.19.0-18-amd64
(G)UI : Mate
Inscription : 16-12-2016

Re : Pilote pour Imprimante Ricoh Aficio SP 1000S (RESOLU)

Hello
oui èfpé mais en message #35 il semble que sane n'était pas installé quand la commande scanimage -L a été essayé, ou je me trompe?

zemog a écrit :

root@zemogcoolermaster:~# apt update && apt install sane
Atteint :1 http://deb.debian.org/debian bullseye InRelease
Atteint :2 http://deb.debian.org/debian bullseye-updates InRelease
Atteint :3 http://security.debian.org/debian-security bullseye-security InRelease
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances... Fait
Lecture des informations d'état... Fait     
Tous les paquets sont à jour.
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances... Fait
Lecture des informations d'état... Fait     
Les NOUVEAUX paquets suivants seront installés :
  sane


c'est d'ailleurs étrange que on puisse installé sane-utils sans que sane soit installé
peut etre il faudrait retenté avec la variable debug comme tu l'écris
j'avais vu aussi sur le net mais c'était

SANE_DEBUG_DLL=5 scanimage -L


j'ai testé les deux ça n'a pas l'air de changer grand chose
le résultat est plus verbeux mais je vois pas trop ce que sa apporte de + ?
j'ai lu aussi qu'il fallait vérifié que la ligne ne soit pas commenté dans le fichier dll.conf mais normalement elle ne l'est pas

cat /etc/sane.d/dll.conf |grep ricoh


ricoh
ricoh2

Dernière modification par Croutons (01-07-2022 13:24:30)


-->les cahiers du debutant<--      WikiDF-->Découvrir les principales commandes Linux<--
L' expérience, c'est le nom que chacun donne à ses erreurs. Oscar Wilde

En ligne

#45 01-07-2022 14:28:42

èfpé
Membre
Inscription : 10-07-2016

Re : Pilote pour Imprimante Ricoh Aficio SP 1000S (RESOLU)

Re-,

Croutons a écrit :

[...] il semble que sane n'était pas installé quand la commande 'scanimage -L' a été essayée, [...]


As-tu lu la description de ce paquet ? Il ne fournit que des interfaces graphiques — sane-frontends.

Croutons a écrit :

c'est d'ailleurs étrange qu'on puisse installer sane-utils sans que sane soit installé


Le paquet sane-utils dépend du paquet libsane1, cela suffit à faire fonctionner un scanner supporté.

Enfin, je ne sais pas d'où sort 'SANE_DEBUG_DLL=5' — pas de la page man officielle, en tout cas...

Hors ligne

#46 01-07-2022 15:26:42

ylag
Membre
Inscription : 16-03-2020

Re : Pilote pour Imprimante Ricoh Aficio SP 1000S (RESOLU)

Bonjour,

Croutons a écrit :

Hello
....
j'ai lu aussi qu'il fallait vérifié que la ligne ne soit pas commenté dans le fichier dll.conf mais normalement elle ne l'est pas

cat /etc/sane.d/dll.conf |grep ricoh


ricoh
ricoh2


Le «backend» ricoh2 ne semble pas inclus dans le fichier /etc/sane.d/dll.conf sur ma Debian Bullseye :

yvan@yvan-maison:~$ grep ricoh /etc/sane.d/dll.conf
ricoh
yvan@yvan-maison:~$



Ma liste des paquets «libsane» installés :

yvan@yvan-maison:~$ dpkg -l | grep libsane
ii  libsane:amd64                         1.0.31-4.1                       amd64        API library for scanners [transitional package]
ii  libsane-common                        1.0.31-4.1                       all          API library for scanners -- documentation and support files
ii  libsane-dev:amd64                     1.0.31-4.1                       amd64        API development library for scanners [development files]
ii  libsane-hpaio:amd64                   3.21.2+dfsg1-2                   amd64        HP SANE backend for multi-function peripherals
ii  libsane1:amd64                        1.0.31-4.1                       amd64        API library for scanners
yvan@yvan-maison:~$



A+

Dernière modification par ylag (01-07-2022 17:49:28)

Hors ligne

#47 01-07-2022 21:15:47

zemog
Membre
Distrib. : Débian Bullseye (11)
Noyau : Linux 5.10.0.9 amd64
(G)UI : gnome 3.38.5
Inscription : 09-07-2017

Re : Pilote pour Imprimante Ricoh Aficio SP 1000S (RESOLU)

Bonsoir tout le monde.coffeecup.gif

voici les commandes exécutes ce soir pour répondre à vos interrogations.

zemog@zemogcoolermaster:~$ groups
zemog cdrom floppy audio dip video plugdev netdev bluetooth scanner
(donc le scanner apparaît)

j’ai tenté les deux approches conseillées auxquelles rien je ne comprends:

zemog@zemogcoolermaster:~$ SANE_DEBUG_DLL=4 scanimage -L
[21:05:37.726844] [sanei_debug] Setting debug level of dll to 4.
[21:05:37.726921] [dll] sane_init: SANE dll backend version 1.0.13 from sane-backends 1.0.31-debian
[21:05:37.726952] [dll] sane_init/read_dlld: attempting to open directory `./dll.d'
[21:05:37.726974] [dll] sane_init/read_dlld: attempting to open directory `/etc/sane.d/dll.d'
[21:05:37.726994] [dll] sane_init/read_dlld: using config directory `/etc/sane.d/dll.d'
[21:05:37.727047] [dll] add_backend: adding backend `net'
[21:05:37.727062] [dll] add_backend: adding backend `abaton'
[21:05:37.727078] [dll] add_backend: adding backend `agfafocus'
[21:05:37.727095] [dll] add_backend: adding backend `apple'
[21:05:37.727112] [dll] add_backend: adding backend `artec'
[21:05:37.727125] [dll] add_backend: adding backend `artec_eplus48u'
[21:05:37.727140] [dll] add_backend: adding backend `as6e'
[21:05:37.727159] [dll] add_backend: adding backend `avision'
[21:05:37.727174] [dll] add_backend: adding backend `bh'
[21:05:37.727187] [dll] add_backend: adding backend `canon'
[21:05:37.727205] [dll] add_backend: adding backend `canon630u'
[21:05:37.727222] [dll] add_backend: adding backend `canon_dr'
[21:05:37.727237] [dll] add_backend: adding backend `canon_lide70'
[21:05:37.727253] [dll] add_backend: adding backend `cardscan'
[21:05:37.727267] [dll] add_backend: adding backend `coolscan'
[21:05:37.727281] [dll] add_backend: adding backend `coolscan3'
[21:05:37.727299] [dll] add_backend: adding backend `dell1600n_net'
[21:05:37.727315] [dll] add_backend: adding backend `dmc'
[21:05:37.727331] [dll] add_backend: adding backend `epjitsu'
[21:05:37.727346] [dll] add_backend: adding backend `epson2'
[21:05:37.727361] [dll] add_backend: adding backend `epsonds'
[21:05:37.727376] [dll] add_backend: adding backend `escl'
[21:05:37.727392] [dll] add_backend: adding backend `fujitsu'
[21:05:37.727408] [dll] add_backend: adding backend `genesys'
[21:05:37.727424] [dll] add_backend: adding backend `gt68xx'
[21:05:37.727441] [dll] add_backend: adding backend `hp'
[21:05:37.727457] [dll] add_backend: adding backend `hp3500'
[21:05:37.727471] [dll] add_backend: adding backend `hp3900'
[21:05:37.727485] [dll] add_backend: adding backend `hp4200'
[21:05:37.727500] [dll] add_backend: adding backend `hp5400'
[21:05:37.727516] [dll] add_backend: adding backend `hp5590'
[21:05:37.727531] [dll] add_backend: adding backend `hpljm1005'
[21:05:37.727548] [dll] add_backend: adding backend `hpsj5s'
[21:05:37.727564] [dll] add_backend: adding backend `hs2p'
[21:05:37.727586] [dll] add_backend: adding backend `ibm'
[21:05:37.727603] [dll] add_backend: adding backend `kodak'
[21:05:37.727619] [dll] add_backend: adding backend `kodakaio'
[21:05:37.727637] [dll] add_backend: adding backend `kvs1025'
[21:05:37.727652] [dll] add_backend: adding backend `kvs20xx'
[21:05:37.727669] [dll] add_backend: adding backend `kvs40xx'
[21:05:37.727684] [dll] add_backend: adding backend `leo'
[21:05:37.727700] [dll] add_backend: adding backend `lexmark'
[21:05:37.727716] [dll] add_backend: adding backend `ma1509'
[21:05:37.727733] [dll] add_backend: adding backend `magicolor'
[21:05:37.727750] [dll] add_backend: adding backend `matsushita'
[21:05:37.727767] [dll] add_backend: adding backend `microtek'
[21:05:37.727782] [dll] add_backend: adding backend `microtek2'
[21:05:37.727798] [dll] add_backend: adding backend `mustek'
[21:05:37.727814] [dll] add_backend: adding backend `mustek_usb'
[21:05:37.727831] [dll] add_backend: adding backend `mustek_usb2'
[21:05:37.727846] [dll] add_backend: adding backend `nec'
[21:05:37.727861] [dll] add_backend: adding backend `niash'
[21:05:37.727878] [dll] add_backend: adding backend `pie'
[21:05:37.727894] [dll] add_backend: adding backend `pieusb'
[21:05:37.727910] [dll] add_backend: adding backend `pint'
[21:05:37.727930] [dll] add_backend: adding backend `pixma'
[21:05:37.727946] [dll] add_backend: adding backend `plustek'
[21:05:37.727968] [dll] add_backend: adding backend `qcam'
[21:05:37.727985] [dll] add_backend: adding backend `ricoh'
[21:05:37.728003] [dll] add_backend: adding backend `ricoh2'
[21:05:37.728019] [dll] add_backend: adding backend `rts8891'
[21:05:37.728035] [dll] add_backend: adding backend `s9036'
[21:05:37.728052] [dll] add_backend: adding backend `sceptre'
[21:05:37.728068] [dll] add_backend: adding backend `sharp'
[21:05:37.728085] [dll] add_backend: adding backend `sm3600'
[21:05:37.728102] [dll] add_backend: adding backend `sm3840'
[21:05:37.728118] [dll] add_backend: adding backend `snapscan'
[21:05:37.728135] [dll] add_backend: adding backend `sp15c'
[21:05:37.728153] [dll] add_backend: adding backend `tamarack'
[21:05:37.728171] [dll] add_backend: adding backend `teco1'
[21:05:37.728187] [dll] add_backend: adding backend `teco2'
[21:05:37.728201] [dll] add_backend: adding backend `teco3'
[21:05:37.728219] [dll] add_backend: adding backend `u12'
[21:05:37.728234] [dll] add_backend: adding backend `umax'
[21:05:37.728249] [dll] add_backend: adding backend `umax1220u'
[21:05:37.728266] [dll] add_backend: adding backend `v4l'
[21:05:37.728281] [dll] add_backend: adding backend `xerox_mfp'
[21:05:37.728320] [dll] sane_get_devices
[21:05:37.728336] [dll] load: searching backend `xerox_mfp' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:37.728353] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-xerox_mfp.so.1'
[21:05:37.728376] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-xerox_mfp.so.1'
[21:05:37.728627] [dll] init: initializing backend `xerox_mfp'
[21:05:37.736361] [dll] init: backend `xerox_mfp' is version 1.0.13
[21:05:37.736554] [dll] load: searching backend `v4l' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:37.736577] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-v4l.so.1'
[21:05:37.736610] [dll] load: couldn't open `/usr/lib/x86_64-linux-gnu/sane/libsane-v4l.so.1' (No such file or directory)
[21:05:37.736631] [dll] load: trying to load `/usr/lib/sane/libsane-v4l.so.1'
[21:05:37.736655] [dll] load: couldn't open `/usr/lib/sane/libsane-v4l.so.1' (No such file or directory)
[21:05:37.736700] [dll] load: trying to load `/usr/lib64/sane/libsane-v4l.so.1'
[21:05:37.736720] [dll] load: couldn't open `/usr/lib64/sane/libsane-v4l.so.1' (No such file or directory)
[21:05:37.736733] [dll] load: couldn't find backend `v4l' (No such file or directory)
[21:05:37.736748] [dll] load: searching backend `umax1220u' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:37.736763] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-umax1220u.so.1'
[21:05:37.736784] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-umax1220u.so.1'
[21:05:37.737050] [dll] init: initializing backend `umax1220u'
[21:05:37.737170] [dll] init: backend `umax1220u' is version 1.0.2
[21:05:37.737190] [dll] load: searching backend `umax' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:37.737203] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-umax.so.1'
[21:05:37.737222] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-umax.so.1'
[21:05:37.737479] [dll] init: initializing backend `umax'
[21:05:37.738798] [dll] init: backend `umax' is version 1.0.45
[21:05:37.738823] [dll] load: searching backend `u12' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:37.738838] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-u12.so.1'
[21:05:37.738862] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-u12.so.1'
[21:05:37.739068] [dll] init: initializing backend `u12'
[21:05:37.739209] [dll] init: backend `u12' is version 1.0.0
[21:05:37.739225] [dll] load: searching backend `teco3' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:37.739237] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-teco3.so.1'
[21:05:37.739253] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-teco3.so.1'
[21:05:37.739370] [dll] init: initializing backend `teco3'
[21:05:37.739766] [dll] init: backend `teco3' is version 1.0.1
[21:05:37.739783] [dll] load: searching backend `teco2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:37.739795] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-teco2.so.1'
[21:05:37.739811] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-teco2.so.1'
[21:05:37.739927] [dll] init: initializing backend `teco2'
[21:05:37.740554] [dll] init: backend `teco2' is version 1.0.10
[21:05:37.740569] [dll] load: searching backend `teco1' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:37.740580] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-teco1.so.1'
[21:05:37.740595] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-teco1.so.1'
[21:05:37.740722] [dll] init: initializing backend `teco1'
[21:05:37.741128] [dll] init: backend `teco1' is version 1.0.10
[21:05:37.741144] [dll] load: searching backend `tamarack' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:37.741154] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-tamarack.so.1'
[21:05:37.741169] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-tamarack.so.1'
[21:05:37.741290] [dll] init: initializing backend `tamarack'
[21:05:37.741483] [dll] init: backend `tamarack' is version 1.0.0
[21:05:37.741498] [dll] load: searching backend `sp15c' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:37.741509] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sp15c.so.1'
[21:05:37.741524] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sp15c.so.1'
[21:05:37.741640] [dll] init: initializing backend `sp15c'
[21:05:37.741730] [dll] init: backend `sp15c' is version 1.0.0
[21:05:37.741745] [dll] load: searching backend `snapscan' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:37.741755] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-snapscan.so.1'
[21:05:37.741769] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-snapscan.so.1'
[21:05:37.741944] [dll] init: initializing backend `snapscan'
[21:05:37.742265] [dll] init: backend `snapscan' is version 1.4.53
[21:05:37.742281] [dll] load: searching backend `sm3840' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:37.742291] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3840.so.1'
[21:05:37.742306] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3840.so.1'
[21:05:37.742455] [dll] init: initializing backend `sm3840'
[21:05:37.742520] [dll] init: backend `sm3840' is version 1.0.0
[21:05:37.742533] [dll] load: searching backend `sm3600' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:37.742543] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3600.so.1'
[21:05:37.742559] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3600.so.1'
[21:05:37.742707] [dll] init: initializing backend `sm3600'
[21:05:37.742775] [dll] init: backend `sm3600' is version 1.0.6
[21:05:37.742790] [dll] load: searching backend `sharp' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:37.742804] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sharp.so.1'
[21:05:37.742826] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sharp.so.1'
[21:05:37.742965] [dll] init: initializing backend `sharp'
[21:05:37.743209] [dll] init: backend `sharp' is version 1.0.0
[21:05:37.743227] [dll] load: searching backend `sceptre' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:37.743241] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sceptre.so.1'
[21:05:37.743261] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sceptre.so.1'
[21:05:37.743417] [dll] init: initializing backend `sceptre'
[21:05:37.743729] [dll] init: backend `sceptre' is version 1.0.10
[21:05:37.743769] [dll] load: searching backend `s9036' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:37.743791] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-s9036.so.1'
[21:05:37.743826] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-s9036.so.1'
[21:05:37.743995] [dll] init: initializing backend `s9036'
[21:05:37.744221] [dll] init: backend `s9036' is version 1.0.0
[21:05:37.744245] [dll] load: searching backend `rts8891' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:37.744263] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-rts8891.so.1'
[21:05:37.744286] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-rts8891.so.1'
[21:05:37.744570] [dll] init: initializing backend `rts8891'
[21:05:37.744737] [dll] init: backend `rts8891' is version 1.0.2401
[21:05:37.744836] [dll] load: searching backend `ricoh2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:37.744853] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ricoh2.so.1'
[21:05:37.744875] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ricoh2.so.1'
[21:05:37.745081] [dll] init: initializing backend `ricoh2'
[21:05:37.745166] [dll] init: backend `ricoh2' is version 1.0.0
[21:05:37.745183] [dll] load: searching backend `ricoh' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:37.745199] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ricoh.so.1'
[21:05:37.745221] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ricoh.so.1'
[21:05:37.745368] [dll] init: initializing backend `ricoh'
[21:05:37.745567] [dll] init: backend `ricoh' is version 1.0.0
[21:05:37.745588] [dll] load: searching backend `qcam' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:37.745604] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-qcam.so.1'
[21:05:37.745626] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-qcam.so.1'
[21:05:37.745767] [dll] init: initializing backend `qcam'
[21:05:37.745815] [dll] init: backend `qcam' is version 1.0.0
[21:05:37.745832] [dll] load: searching backend `plustek' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:37.745847] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-plustek.so.1'
[21:05:37.745868] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-plustek.so.1'
[21:05:37.746109] [dll] init: initializing backend `plustek'
[21:05:37.746499] [dll] init: backend `plustek' is version 1.0.0
[21:05:37.746520] [dll] load: searching backend `pixma' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:37.746535] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pixma.so.1'
[21:05:37.746557] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-pixma.so.1'
[21:05:37.746863] [dll] init: initializing backend `pixma'
[21:05:37.746984] [dll] init: backend `pixma' is version 1.0.28
[21:05:38.268545] [dll] load: searching backend `pint' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:38.268596] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pint.so.1'
[21:05:38.268622] [dll] load: couldn't open `/usr/lib/x86_64-linux-gnu/sane/libsane-pint.so.1' (No such file or directory)
[21:05:38.268637] [dll] load: trying to load `/usr/lib/sane/libsane-pint.so.1'
[21:05:38.268652] [dll] load: couldn't open `/usr/lib/sane/libsane-pint.so.1' (No such file or directory)
[21:05:38.268665] [dll] load: trying to load `/usr/lib64/sane/libsane-pint.so.1'
[21:05:38.268730] [dll] load: couldn't open `/usr/lib64/sane/libsane-pint.so.1' (No such file or directory)
[21:05:38.268744] [dll] load: couldn't find backend `pint' (No such file or directory)
[21:05:38.268758] [dll] load: searching backend `pieusb' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:38.268771] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pieusb.so.1'
[21:05:38.268795] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-pieusb.so.1'
[21:05:38.269157] [dll] init: initializing backend `pieusb'
[21:05:38.269286] [dll] init: backend `pieusb' is version 1.0.1
[21:05:38.269303] [dll] load: searching backend `pie' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:38.269315] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pie.so.1'
[21:05:38.269333] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-pie.so.1'
[21:05:38.269494] [dll] init: initializing backend `pie'
[21:05:38.269891] [dll] init: backend `pie' is version 1.0.9
[21:05:38.269914] [dll] load: searching backend `niash' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:38.269929] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-niash.so.1'
[21:05:38.269947] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-niash.so.1'
[21:05:38.270133] [dll] init: initializing backend `niash'
[21:05:38.270212] [dll] init: backend `niash' is version 1.0.1
[21:05:38.270228] [dll] load: searching backend `nec' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:38.270242] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-nec.so.1'
[21:05:38.270261] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-nec.so.1'
[21:05:38.270399] [dll] init: initializing backend `nec'
[21:05:38.270580] [dll] init: backend `nec' is version 1.0.0
[21:05:38.270598] [dll] load: searching backend `mustek_usb2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:38.270613] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb2.so.1'
[21:05:38.270631] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb2.so.1'
[21:05:38.270819] [dll] init: initializing backend `mustek_usb2'
[21:05:38.270848] [dll] init: backend `mustek_usb2' is version 1.0.10
[21:05:38.270915] [dll] load: searching backend `mustek_usb' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:38.270929] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb.so.1'
[21:05:38.270951] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb.so.1'
[21:05:38.271133] [dll] init: initializing backend `mustek_usb'
[21:05:38.271250] [dll] init: backend `mustek_usb' is version 1.0.18
[21:05:38.271267] [dll] load: searching backend `mustek' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:38.271280] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek.so.1'
[21:05:38.271297] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek.so.1'
[21:05:38.271556] [dll] init: initializing backend `mustek'
[21:05:38.272026] [dll] init: backend `mustek' is version 1.0.138
[21:05:38.272049] [dll] load: searching backend `microtek2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:38.272060] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek2.so.1'
[21:05:38.272077] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek2.so.1'
[21:05:38.272228] [dll] init: initializing backend `microtek2'
[21:05:38.272481] [dll] init: backend `microtek2' is version 1.0.0
[21:05:38.272506] [dll] load: searching backend `microtek' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:38.272520] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek.so.1'
[21:05:38.272542] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek.so.1'
[21:05:38.272695] [dll] init: initializing backend `microtek'
[21:05:38.272940] [dll] init: backend `microtek' is version 1.0.0
[21:05:38.272958] [dll] load: searching backend `matsushita' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:38.272973] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-matsushita.so.1'
[21:05:38.272991] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-matsushita.so.1'
[21:05:38.273128] [dll] init: initializing backend `matsushita'
[21:05:38.273607] [dll] init: backend `matsushita' is version 1.0.7
[21:05:38.273626] [dll] load: searching backend `magicolor' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:38.273636] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-magicolor.so.1'
[21:05:38.273652] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-magicolor.so.1'
[21:05:38.277480] [dll] init: initializing backend `magicolor'
[21:05:38.277583] [dll] init: backend `magicolor' is version 1.0.1
[21:05:39.781165] [dll] load: searching backend `ma1509' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:39.781211] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ma1509.so.1'
[21:05:39.781251] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ma1509.so.1'
[21:05:39.781584] [dll] init: initializing backend `ma1509'
[21:05:39.781731] [dll] init: backend `ma1509' is version 1.0.3
[21:05:39.781750] [dll] load: searching backend `lexmark' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:39.781766] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-lexmark.so.1'
[21:05:39.781793] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-lexmark.so.1'
[21:05:39.782014] [dll] init: initializing backend `lexmark'
[21:05:39.782153] [dll] init: backend `lexmark' is version 1.0.32
[21:05:39.782259] [dll] load: searching backend `leo' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:39.782276] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-leo.so.1'
[21:05:39.782299] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-leo.so.1'
[21:05:39.782462] [dll] init: initializing backend `leo'
[21:05:39.782860] [dll] init: backend `leo' is version 1.0.11
[21:05:39.782886] [dll] load: searching backend `kvs40xx' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:39.782905] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs40xx.so.1'
[21:05:39.782933] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs40xx.so.1'
[21:05:39.783176] [dll] init: initializing backend `kvs40xx'
[21:05:39.783273] [dll] init: backend `kvs40xx' is version 1.0.1
[21:05:39.783500] [dll] load: searching backend `kvs20xx' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:39.783519] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs20xx.so.1'
[21:05:39.783545] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs20xx.so.1'
[21:05:39.783774] [dll] init: initializing backend `kvs20xx'
[21:05:39.783870] [dll] init: backend `kvs20xx' is version 1.0.2
[21:05:39.784304] [dll] load: searching backend `kvs1025' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:39.784326] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs1025.so.1'
[21:05:39.784355] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs1025.so.1'
[21:05:39.784621] [dll] init: initializing backend `kvs1025'
[21:05:39.784783] [dll] init: backend `kvs1025' is version 1.0.5
[21:05:39.784802] [dll] load: searching backend `kodakaio' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:39.784818] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kodakaio.so.1'
[21:05:39.784845] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kodakaio.so.1'
[21:05:39.786908] [dll] init: initializing backend `kodakaio'
[21:05:39.787004] [dll] init: backend `kodakaio' is version 1.0.3
[21:05:41.713818] [dll] load: searching backend `kodak' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:41.713858] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kodak.so.1'
[21:05:41.713886] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kodak.so.1'
[21:05:41.714156] [dll] init: initializing backend `kodak'
[21:05:41.714183] [dll] init: backend `kodak' is version 1.0.7
[21:05:41.714333] [dll] load: searching backend `ibm' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:41.714351] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ibm.so.1'
[21:05:41.714371] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ibm.so.1'
[21:05:41.714526] [dll] init: initializing backend `ibm'
[21:05:41.714706] [dll] init: backend `ibm' is version 1.0.0
[21:05:41.714724] [dll] load: searching backend `hs2p' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:41.714738] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hs2p.so.1'
[21:05:41.714755] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hs2p.so.1'
[21:05:41.714902] [dll] init: initializing backend `hs2p'
[21:05:41.715146] [dll] init: backend `hs2p' is version 1.0.0
[21:05:41.715165] [dll] load: searching backend `hpsj5s' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:41.715178] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hpsj5s.so.1'
[21:05:41.715195] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hpsj5s.so.1'
[21:05:41.715339] [dll] init: initializing backend `hpsj5s'
[21:05:41.715395] [dll] init: backend `hpsj5s' is version 1.0.3
[21:05:41.715409] [dll] load: searching backend `hpljm1005' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:41.715423] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hpljm1005.so.1'
[21:05:41.715442] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hpljm1005.so.1'
[21:05:41.715644] [dll] init: initializing backend `hpljm1005'
[21:05:41.715731] [dll] init: backend `hpljm1005' is version 1.0.1
[21:05:41.715746] [dll] load: searching backend `hp5590' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:41.715760] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5590.so.1'
[21:05:41.715780] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5590.so.1'
[21:05:41.715973] [dll] init: initializing backend `hp5590'
[21:05:41.716050] [dll] init: backend `hp5590' is version 1.0.8
[21:05:41.716067] [dll] load: searching backend `hp5400' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:41.716082] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5400.so.1'
[21:05:41.716104] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5400.so.1'
[21:05:41.716291] [dll] init: initializing backend `hp5400'
[21:05:41.716392] [dll] init: backend `hp5400' is version 1.0.3
[21:05:41.716410] [dll] load: searching backend `hp4200' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:41.716423] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp4200.so.1'
[21:05:41.716442] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp4200.so.1'
[21:05:41.716636] [dll] init: initializing backend `hp4200'
[21:05:41.716759] [dll] init: backend `hp4200' is version 1.0.0
[21:05:41.716777] [dll] load: searching backend `hp3900' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:41.716790] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3900.so.1'
[21:05:41.716809] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3900.so.1'
[21:05:41.717545] [dll] init: initializing backend `hp3900'
[21:05:41.717661] [dll] init: backend `hp3900' is version 1.0.0
[21:05:41.717678] [dll] load: searching backend `hp3500' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:41.717691] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3500.so.1'
[21:05:41.717708] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3500.so.1'
[21:05:41.717909] [dll] init: initializing backend `hp3500'
[21:05:41.717985] [dll] init: backend `hp3500' is version 1.0.0
[21:05:41.718005] [dll] load: searching backend `hp' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:41.718019] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp.so.1'
[21:05:41.718040] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp.so.1'
[21:05:41.718308] [dll] init: initializing backend `hp'
[21:05:41.718341] [dll] init: backend `hp' is version 1.0.8
[21:05:41.718673] [dll] load: searching backend `gt68xx' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:41.718694] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-gt68xx.so.1'
[21:05:41.718714] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-gt68xx.so.1'
[21:05:41.718924] [dll] init: initializing backend `gt68xx'
[21:05:41.719114] [dll] init: backend `gt68xx' is version 1.0.84
[21:05:41.719274] [dll] load: searching backend `genesys' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:41.719290] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-genesys.so.1'
[21:05:41.719309] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-genesys.so.1'
[21:05:41.720412] [dll] init: initializing backend `genesys'
[21:05:41.721376] [dll] init: backend `genesys' is version 1.0.0
[21:05:41.721511] [dll] load: searching backend `fujitsu' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:41.721527] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-fujitsu.so.1'
[21:05:41.721545] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-fujitsu.so.1'
[21:05:41.721767] [dll] init: initializing backend `fujitsu'
[21:05:41.721798] [dll] init: backend `fujitsu' is version 1.0.136
[21:05:41.722022] [dll] load: searching backend `escl' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:41.722040] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-escl.so.1'
[21:05:41.722059] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-escl.so.1'
[21:05:41.743002] [dll] init: initializing backend `escl'
[21:05:41.743146] [dll] init: backend `escl' is version 1.0.0
[21:05:42.759252] [dll] load: searching backend `epsonds' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:42.759294] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-epsonds.so.1'
[21:05:42.759324] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-epsonds.so.1'
[21:05:42.759762] [dll] init: initializing backend `epsonds'
[21:05:42.759858] [dll] init: backend `epsonds' is version 1.0.0
[21:05:42.759913] [dll] load: searching backend `epson2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:42.759928] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-epson2.so.1'
[21:05:42.759948] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-epson2.so.1'
[21:05:42.760226] [dll] init: initializing backend `epson2'
[21:05:42.760306] [dll] init: backend `epson2' is version 1.0.124
[21:05:43.761621] [dll] load: searching backend `epjitsu' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:43.761667] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-epjitsu.so.1'
[21:05:43.761695] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-epjitsu.so.1'
[21:05:43.762041] [dll] init: initializing backend `epjitsu'
[21:05:43.762067] [dll] init: backend `epjitsu' is version 1.0.31
[21:05:43.762191] [dll] load: searching backend `dmc' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:43.762207] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-dmc.so.1'
[21:05:43.762224] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-dmc.so.1'
[21:05:43.762380] [dll] init: initializing backend `dmc'
[21:05:43.762588] [dll] init: backend `dmc' is version 1.0.0
[21:05:43.762606] [dll] load: searching backend `dell1600n_net' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:43.762619] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-dell1600n_net.so.1'
[21:05:43.762637] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-dell1600n_net.so.1'
[21:05:43.762841] [dll] init: initializing backend `dell1600n_net'
[21:05:43.762861] [dll] init: backend `dell1600n_net' is version 1.0.0
[21:05:44.063725] [dll] load: searching backend `coolscan3' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:44.063776] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan3.so.1'
[21:05:44.063807] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan3.so.1'
[21:05:44.064173] [dll] init: initializing backend `coolscan3'
[21:05:44.064270] [dll] init: backend `coolscan3' is version 1.0.0
[21:05:44.064422] [dll] load: searching backend `coolscan' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:44.064440] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan.so.1'
[21:05:44.064461] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan.so.1'
[21:05:44.064719] [dll] init: initializing backend `coolscan'
[21:05:44.064975] [dll] init: backend `coolscan' is version 1.0.0
[21:05:44.064994] [dll] load: searching backend `cardscan' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:44.065009] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-cardscan.so.1'
[21:05:44.065026] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-cardscan.so.1'
[21:05:44.065229] [dll] init: initializing backend `cardscan'
[21:05:44.065308] [dll] init: backend `cardscan' is version 1.0.3
[21:05:44.065348] [dll] load: searching backend `canon_lide70' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:44.065361] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon_lide70.so.1'
[21:05:44.065378] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon_lide70.so.1'
[21:05:44.065580] [dll] init: initializing backend `canon_lide70'
[21:05:44.065681] [dll] init: backend `canon_lide70' is version 1.0.0
[21:05:44.065702] [dll] load: searching backend `canon_dr' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:44.065717] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon_dr.so.1'
[21:05:44.065736] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon_dr.so.1'
[21:05:44.066064] [dll] init: initializing backend `canon_dr'
[21:05:44.066102] [dll] init: backend `canon_dr' is version 1.0.58
[21:05:44.066391] [dll] load: searching backend `canon630u' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:44.066410] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon630u.so.1'
[21:05:44.066430] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon630u.so.1'
[21:05:44.066648] [dll] init: initializing backend `canon630u'
[21:05:44.066746] [dll] init: backend `canon630u' is version 1.0.1
[21:05:44.066762] [dll] load: searching backend `canon' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:44.066775] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon.so.1'
[21:05:44.066795] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon.so.1'
[21:05:44.066949] [dll] init: initializing backend `canon'
[21:05:44.067085] [dll] init: backend `canon' is version 1.0.0
[21:05:44.067102] [dll] load: searching backend `bh' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:44.067116] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-bh.so.1'
[21:05:44.067135] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-bh.so.1'
[21:05:44.067283] [dll] init: initializing backend `bh'
[21:05:44.067542] [dll] init: backend `bh' is version 1.0.4
[21:05:44.067561] [dll] load: searching backend `avision' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:44.067574] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-avision.so.1'
[21:05:44.067594] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-avision.so.1'
[21:05:44.067827] [dll] init: initializing backend `avision'
[21:05:44.071704] [dll] init: backend `avision' is version 1.0.297
[21:05:44.075517] [dll] load: searching backend `as6e' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:44.075536] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-as6e.so.1'
[21:05:44.075552] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-as6e.so.1'
[21:05:44.075703] [dll] init: initializing backend `as6e'
[21:05:44.075740] [dll] load: searching backend `artec_eplus48u' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:44.075752] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-artec_eplus48u.so.1'
[21:05:44.075772] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-artec_eplus48u.so.1'
[21:05:44.075989] [dll] init: initializing backend `artec_eplus48u'
[21:05:44.076215] [dll] init: backend `artec_eplus48u' is version 1.0.0
[21:05:44.076235] [dll] load: searching backend `artec' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:44.076249] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-artec.so.1'
[21:05:44.076269] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-artec.so.1'
[21:05:44.076439] [dll] init: initializing backend `artec'
[21:05:44.076717] [dll] init: backend `artec' is version 1.0.0
[21:05:44.076737] [dll] load: searching backend `apple' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:44.076749] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-apple.so.1'
[21:05:44.076768] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-apple.so.1'
[21:05:44.076925] [dll] init: initializing backend `apple'
[21:05:44.077159] [dll] init: backend `apple' is version 1.0.0
[21:05:44.077176] [dll] load: searching backend `agfafocus' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:44.077190] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-agfafocus.so.1'
[21:05:44.077209] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-agfafocus.so.1'
[21:05:44.077377] [dll] init: initializing backend `agfafocus'
[21:05:44.077559] [dll] init: backend `agfafocus' is version 1.0.0
[21:05:44.077577] [dll] load: searching backend `abaton' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:44.077591] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-abaton.so.1'
[21:05:44.077610] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-abaton.so.1'
[21:05:44.077759] [dll] init: initializing backend `abaton'
[21:05:44.077990] [dll] init: backend `abaton' is version 1.0.0
[21:05:44.078007] [dll] load: searching backend `net' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:05:44.078020] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-net.so.1'
[21:05:44.078037] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-net.so.1'
[21:05:44.078302] [dll] init: initializing backend `net'
[21:05:44.081205] [dll] init: backend `net' is version 1.0.31
[21:05:44.081239] [dll] sane_get_devices: found 0 devices

No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
[21:05:44.081267] [dll] sane_exit: exiting
[21:05:44.081278] [dll] sane_exit: calling backend `xerox_mfp's exit function
[21:05:44.081410] [dll] sane_exit: calling backend `umax1220u's exit function
[21:05:44.081488] [dll] sane_exit: calling backend `umax's exit function
[21:05:44.081562] [dll] sane_exit: calling backend `u12's exit function
[21:05:44.081629] [dll] sane_exit: calling backend `teco3's exit function
[21:05:44.081690] [dll] sane_exit: calling backend `teco2's exit function
[21:05:44.081749] [dll] sane_exit: calling backend `teco1's exit function
[21:05:44.081805] [dll] sane_exit: calling backend `tamarack's exit function
[21:05:44.081861] [dll] sane_exit: calling backend `sp15c's exit function
[21:05:44.081914] [dll] sane_exit: calling backend `snapscan's exit function
[21:05:44.081977] [dll] sane_exit: calling backend `sm3840's exit function
[21:05:44.082034] [dll] sane_exit: calling backend `sm3600's exit function
[21:05:44.082091] [dll] sane_exit: calling backend `sharp's exit function
[21:05:44.082150] [dll] sane_exit: calling backend `sceptre's exit function
[21:05:44.082202] [dll] sane_exit: calling backend `s9036's exit function
[21:05:44.082254] [dll] sane_exit: calling backend `rts8891's exit function
[21:05:44.082316] [dll] sane_exit: calling backend `ricoh2's exit function
[21:05:44.082377] [dll] sane_exit: calling backend `ricoh's exit function
[21:05:44.082448] [dll] sane_exit: calling backend `qcam's exit function
[21:05:44.082519] [dll] sane_exit: calling backend `plustek's exit function
[21:05:44.082615] [dll] sane_exit: calling backend `pixma's exit function
[21:05:44.082721] [dll] sane_exit: calling backend `pieusb's exit function
[21:05:44.082785] [dll] sane_exit: calling backend `pie's exit function
[21:05:44.082839] [dll] sane_exit: calling backend `niash's exit function
[21:05:44.082892] [dll] sane_exit: calling backend `nec's exit function
[21:05:44.082944] [dll] sane_exit: calling backend `mustek_usb2's exit function
[21:05:44.083003] [dll] sane_exit: calling backend `mustek_usb's exit function
[21:05:44.083060] [dll] sane_exit: calling backend `mustek's exit function
[21:05:44.083125] [dll] sane_exit: calling backend `microtek2's exit function
[21:05:44.083181] [dll] sane_exit: calling backend `microtek's exit function
[21:05:44.083234] [dll] sane_exit: calling backend `matsushita's exit function
[21:05:44.083285] [dll] sane_exit: calling backend `magicolor's exit function
[21:05:44.083436] [dll] sane_exit: calling backend `ma1509's exit function
[21:05:44.083494] [dll] sane_exit: calling backend `lexmark's exit function
[21:05:44.083550] [dll] sane_exit: calling backend `leo's exit function
[21:05:44.083597] [dll] sane_exit: calling backend `kvs40xx's exit function
[21:05:44.083651] [dll] sane_exit: calling backend `kvs20xx's exit function
[21:05:44.083703] [dll] sane_exit: calling backend `kvs1025's exit function
[21:05:44.083755] [dll] sane_exit: calling backend `kodakaio's exit function
[21:05:44.083811] [dll] sane_exit: calling backend `kodak's exit function
[21:05:44.083865] [dll] sane_exit: calling backend `ibm's exit function
[21:05:44.083911] [dll] sane_exit: calling backend `hs2p's exit function
[21:05:44.083959] [dll] sane_exit: calling backend `hpsj5s's exit function
[21:05:44.084021] [dll] sane_exit: calling backend `hpljm1005's exit function
[21:05:44.084072] [dll] sane_exit: calling backend `hp5590's exit function
[21:05:44.084125] [dll] sane_exit: calling backend `hp5400's exit function
[21:05:44.084179] [dll] sane_exit: calling backend `hp4200's exit function
[21:05:44.084230] [dll] sane_exit: calling backend `hp3900's exit function
[21:05:44.084288] [dll] sane_exit: calling backend `hp3500's exit function
[21:05:44.084344] [dll] sane_exit: calling backend `hp's exit function
[21:05:44.084397] [dll] sane_exit: calling backend `gt68xx's exit function
[21:05:44.084454] [dll] sane_exit: calling backend `genesys's exit function
[21:05:44.084559] [dll] sane_exit: calling backend `fujitsu's exit function
[21:05:44.084619] [dll] sane_exit: calling backend `escl's exit function
[21:05:44.085237] [dll] sane_exit: calling backend `epsonds's exit function
[21:05:44.085297] [dll] sane_exit: calling backend `epson2's exit function
[21:05:44.085362] [dll] sane_exit: calling backend `epjitsu's exit function
[21:05:44.085427] [dll] sane_exit: calling backend `dmc's exit function
[21:05:44.085477] [dll] sane_exit: calling backend `dell1600n_net's exit function
[21:05:44.085518] [dll] sane_exit: calling backend `coolscan3's exit function
[21:05:44.085561] [dll] sane_exit: calling backend `coolscan's exit function
[21:05:44.085602] [dll] sane_exit: calling backend `cardscan's exit function
[21:05:44.085642] [dll] sane_exit: calling backend `canon_lide70's exit function
[21:05:44.085683] [dll] sane_exit: calling backend `canon_dr's exit function
[21:05:44.085726] [dll] sane_exit: calling backend `canon630u's exit function
[21:05:44.085776] [dll] sane_exit: calling backend `canon's exit function
[21:05:44.085815] [dll] sane_exit: calling backend `bh's exit function
[21:05:44.085852] [dll] sane_exit: calling backend `avision's exit function
[21:05:44.085915] [dll] sane_exit: calling backend `artec_eplus48u's exit function
[21:05:44.085955] [dll] sane_exit: calling backend `artec's exit function
[21:05:44.086005] [dll] sane_exit: calling backend `apple's exit function
[21:05:44.086051] [dll] sane_exit: calling backend `agfafocus's exit function
[21:05:44.086088] [dll] sane_exit: calling backend `abaton's exit function
[21:05:44.086124] [dll] sane_exit: calling backend `net's exit function
[21:05:44.086998] [dll] sane_exit: finished

zemog@zemogcoolermaster:~$ SANE_DEBUG_DLL=5 scanimage -L
[21:07:16.266631] [sanei_debug] Setting debug level of dll to 5.
[21:07:16.266708] [dll] sane_init: SANE dll backend version 1.0.13 from sane-backends 1.0.31-debian
[21:07:16.266738] [dll] sane_init/read_dlld: attempting to open directory `./dll.d'
[21:07:16.266764] [dll] sane_init/read_dlld: attempting to open directory `/etc/sane.d/dll.d'
[21:07:16.266793] [dll] sane_init/read_dlld: using config directory `/etc/sane.d/dll.d'
[21:07:16.266828] [dll] sane_init/read_dlld: done.
[21:07:16.266856] [dll] sane_init/read_config: reading dll.conf
[21:07:16.266882] [dll] add_backend: adding backend `net'
[21:07:16.266897] [dll] add_backend: adding backend `abaton'
[21:07:16.266915] [dll] add_backend: adding backend `agfafocus'
[21:07:16.266931] [dll] add_backend: adding backend `apple'
[21:07:16.266948] [dll] add_backend: adding backend `artec'
[21:07:16.266965] [dll] add_backend: adding backend `artec_eplus48u'
[21:07:16.266980] [dll] add_backend: adding backend `as6e'
[21:07:16.266996] [dll] add_backend: adding backend `avision'
[21:07:16.267012] [dll] add_backend: adding backend `bh'
[21:07:16.267027] [dll] add_backend: adding backend `canon'
[21:07:16.267041] [dll] add_backend: adding backend `canon630u'
[21:07:16.267057] [dll] add_backend: adding backend `canon_dr'
[21:07:16.267075] [dll] add_backend: adding backend `canon_lide70'
[21:07:16.267091] [dll] add_backend: adding backend `cardscan'
[21:07:16.267106] [dll] add_backend: adding backend `coolscan'
[21:07:16.267121] [dll] add_backend: adding backend `coolscan3'
[21:07:16.267138] [dll] add_backend: adding backend `dell1600n_net'
[21:07:16.267153] [dll] add_backend: adding backend `dmc'
[21:07:16.267168] [dll] add_backend: adding backend `epjitsu'
[21:07:16.267184] [dll] add_backend: adding backend `epson2'
[21:07:16.267200] [dll] add_backend: adding backend `epsonds'
[21:07:16.267216] [dll] add_backend: adding backend `escl'
[21:07:16.267232] [dll] add_backend: adding backend `fujitsu'
[21:07:16.267249] [dll] add_backend: adding backend `genesys'
[21:07:16.267264] [dll] add_backend: adding backend `gt68xx'
[21:07:16.267280] [dll] add_backend: adding backend `hp'
[21:07:16.267296] [dll] add_backend: adding backend `hp3500'
[21:07:16.267311] [dll] add_backend: adding backend `hp3900'
[21:07:16.267326] [dll] add_backend: adding backend `hp4200'
[21:07:16.267343] [dll] add_backend: adding backend `hp5400'
[21:07:16.267360] [dll] add_backend: adding backend `hp5590'
[21:07:16.267375] [dll] add_backend: adding backend `hpljm1005'
[21:07:16.267390] [dll] add_backend: adding backend `hpsj5s'
[21:07:16.267407] [dll] add_backend: adding backend `hs2p'
[21:07:16.267428] [dll] add_backend: adding backend `ibm'
[21:07:16.267444] [dll] add_backend: adding backend `kodak'
[21:07:16.267458] [dll] add_backend: adding backend `kodakaio'
[21:07:16.267472] [dll] add_backend: adding backend `kvs1025'
[21:07:16.267489] [dll] add_backend: adding backend `kvs20xx'
[21:07:16.267507] [dll] add_backend: adding backend `kvs40xx'
[21:07:16.267522] [dll] add_backend: adding backend `leo'
[21:07:16.267538] [dll] add_backend: adding backend `lexmark'
[21:07:16.267553] [dll] add_backend: adding backend `ma1509'
[21:07:16.267571] [dll] add_backend: adding backend `magicolor'
[21:07:16.267586] [dll] add_backend: adding backend `matsushita'
[21:07:16.267601] [dll] add_backend: adding backend `microtek'
[21:07:16.267617] [dll] add_backend: adding backend `microtek2'
[21:07:16.267633] [dll] add_backend: adding backend `mustek'
[21:07:16.267650] [dll] add_backend: adding backend `mustek_usb'
[21:07:16.267667] [dll] add_backend: adding backend `mustek_usb2'
[21:07:16.267682] [dll] add_backend: adding backend `nec'
[21:07:16.267698] [dll] add_backend: adding backend `niash'
[21:07:16.267713] [dll] add_backend: adding backend `pie'
[21:07:16.267728] [dll] add_backend: adding backend `pieusb'
[21:07:16.267745] [dll] add_backend: adding backend `pint'
[21:07:16.267761] [dll] add_backend: adding backend `pixma'
[21:07:16.267777] [dll] add_backend: adding backend `plustek'
[21:07:16.267798] [dll] add_backend: adding backend `qcam'
[21:07:16.267815] [dll] add_backend: adding backend `ricoh'
[21:07:16.267830] [dll] add_backend: adding backend `ricoh2'
[21:07:16.267848] [dll] add_backend: adding backend `rts8891'
[21:07:16.267864] [dll] add_backend: adding backend `s9036'
[21:07:16.267880] [dll] add_backend: adding backend `sceptre'
[21:07:16.267897] [dll] add_backend: adding backend `sharp'
[21:07:16.267913] [dll] add_backend: adding backend `sm3600'
[21:07:16.267928] [dll] add_backend: adding backend `sm3840'
[21:07:16.267944] [dll] add_backend: adding backend `snapscan'
[21:07:16.267960] [dll] add_backend: adding backend `sp15c'
[21:07:16.267978] [dll] add_backend: adding backend `tamarack'
[21:07:16.267992] [dll] add_backend: adding backend `teco1'
[21:07:16.268009] [dll] add_backend: adding backend `teco2'
[21:07:16.268025] [dll] add_backend: adding backend `teco3'
[21:07:16.268039] [dll] add_backend: adding backend `u12'
[21:07:16.268055] [dll] add_backend: adding backend `umax'
[21:07:16.268072] [dll] add_backend: adding backend `umax1220u'
[21:07:16.268090] [dll] add_backend: adding backend `v4l'
[21:07:16.268106] [dll] add_backend: adding backend `xerox_mfp'
[21:07:16.268144] [dll] sane_get_devices
[21:07:16.268160] [dll] load: searching backend `xerox_mfp' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:16.268176] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-xerox_mfp.so.1'
[21:07:16.268202] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-xerox_mfp.so.1'
[21:07:16.268445] [dll] init: initializing backend `xerox_mfp'
[21:07:16.275719] [dll] init: backend `xerox_mfp' is version 1.0.13
[21:07:16.275887] [dll] load: searching backend `v4l' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:16.275903] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-v4l.so.1'
[21:07:16.275926] [dll] load: couldn't open `/usr/lib/x86_64-linux-gnu/sane/libsane-v4l.so.1' (No such file or directory)
[21:07:16.275940] [dll] load: trying to load `/usr/lib/sane/libsane-v4l.so.1'
[21:07:16.275954] [dll] load: couldn't open `/usr/lib/sane/libsane-v4l.so.1' (No such file or directory)
[21:07:16.275966] [dll] load: trying to load `/usr/lib64/sane/libsane-v4l.so.1'
[21:07:16.275980] [dll] load: couldn't open `/usr/lib64/sane/libsane-v4l.so.1' (No such file or directory)
[21:07:16.275995] [dll] load: couldn't find backend `v4l' (No such file or directory)
[21:07:16.276011] [dll] load: searching backend `umax1220u' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:16.276028] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-umax1220u.so.1'
[21:07:16.276054] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-umax1220u.so.1'
[21:07:16.276309] [dll] init: initializing backend `umax1220u'
[21:07:16.276423] [dll] init: backend `umax1220u' is version 1.0.2
[21:07:16.276442] [dll] load: searching backend `umax' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:16.276463] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-umax.so.1'
[21:07:16.276486] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-umax.so.1'
[21:07:16.276730] [dll] init: initializing backend `umax'
[21:07:16.278033] [dll] init: backend `umax' is version 1.0.45
[21:07:16.278064] [dll] load: searching backend `u12' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:16.278080] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-u12.so.1'
[21:07:16.278105] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-u12.so.1'
[21:07:16.278392] [dll] init: initializing backend `u12'
[21:07:16.278595] [dll] init: backend `u12' is version 1.0.0
[21:07:16.278626] [dll] load: searching backend `teco3' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:16.278642] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-teco3.so.1'
[21:07:16.278665] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-teco3.so.1'
[21:07:16.278825] [dll] init: initializing backend `teco3'
[21:07:16.279332] [dll] init: backend `teco3' is version 1.0.1
[21:07:16.279357] [dll] load: searching backend `teco2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:16.279376] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-teco2.so.1'
[21:07:16.279401] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-teco2.so.1'
[21:07:16.279558] [dll] init: initializing backend `teco2'
[21:07:16.280358] [dll] init: backend `teco2' is version 1.0.10
[21:07:16.280381] [dll] load: searching backend `teco1' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:16.280400] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-teco1.so.1'
[21:07:16.280422] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-teco1.so.1'
[21:07:16.280570] [dll] init: initializing backend `teco1'
[21:07:16.281097] [dll] init: backend `teco1' is version 1.0.10
[21:07:16.281120] [dll] load: searching backend `tamarack' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:16.281138] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-tamarack.so.1'
[21:07:16.281164] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-tamarack.so.1'
[21:07:16.281328] [dll] init: initializing backend `tamarack'
[21:07:16.281575] [dll] init: backend `tamarack' is version 1.0.0
[21:07:16.281595] [dll] load: searching backend `sp15c' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:16.281613] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sp15c.so.1'
[21:07:16.281639] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sp15c.so.1'
[21:07:16.281786] [dll] init: initializing backend `sp15c'
[21:07:16.281895] [dll] init: backend `sp15c' is version 1.0.0
[21:07:16.281913] [dll] load: searching backend `snapscan' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:16.281925] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-snapscan.so.1'
[21:07:16.281942] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-snapscan.so.1'
[21:07:16.282158] [dll] init: initializing backend `snapscan'
[21:07:16.282553] [dll] init: backend `snapscan' is version 1.4.53
[21:07:16.282573] [dll] load: searching backend `sm3840' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:16.282590] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3840.so.1'
[21:07:16.282617] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3840.so.1'
[21:07:16.282799] [dll] init: initializing backend `sm3840'
[21:07:16.282886] [dll] init: backend `sm3840' is version 1.0.0
[21:07:16.282903] [dll] load: searching backend `sm3600' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:16.282922] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3600.so.1'
[21:07:16.282943] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3600.so.1'
[21:07:16.283127] [dll] init: initializing backend `sm3600'
[21:07:16.283207] [dll] init: backend `sm3600' is version 1.0.6
[21:07:16.283224] [dll] load: searching backend `sharp' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:16.283243] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sharp.so.1'
[21:07:16.283263] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sharp.so.1'
[21:07:16.283410] [dll] init: initializing backend `sharp'
[21:07:16.283675] [dll] init: backend `sharp' is version 1.0.0
[21:07:16.283695] [dll] load: searching backend `sceptre' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:16.283713] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sceptre.so.1'
[21:07:16.283736] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sceptre.so.1'
[21:07:16.283892] [dll] init: initializing backend `sceptre'
[21:07:16.284168] [dll] init: backend `sceptre' is version 1.0.10
[21:07:16.284192] [dll] load: searching backend `s9036' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:16.284210] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-s9036.so.1'
[21:07:16.284233] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-s9036.so.1'
[21:07:16.284383] [dll] init: initializing backend `s9036'
[21:07:16.284578] [dll] init: backend `s9036' is version 1.0.0
[21:07:16.284601] [dll] load: searching backend `rts8891' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:16.284620] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-rts8891.so.1'
[21:07:16.284642] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-rts8891.so.1'
[21:07:16.284867] [dll] init: initializing backend `rts8891'
[21:07:16.284981] [dll] init: backend `rts8891' is version 1.0.2401
[21:07:16.285064] [dll] load: searching backend `ricoh2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:16.285079] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ricoh2.so.1'
[21:07:16.285105] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ricoh2.so.1'
[21:07:16.285297] [dll] init: initializing backend `ricoh2'
[21:07:16.285383] [dll] init: backend `ricoh2' is version 1.0.0
[21:07:16.285400] [dll] load: searching backend `ricoh' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:16.285419] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ricoh.so.1'
[21:07:16.285440] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ricoh.so.1'
[21:07:16.285571] [dll] init: initializing backend `ricoh'
[21:07:16.285759] [dll] init: backend `ricoh' is version 1.0.0
[21:07:16.285779] [dll] load: searching backend `qcam' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:16.285798] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-qcam.so.1'
[21:07:16.285817] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-qcam.so.1'
[21:07:16.285949] [dll] init: initializing backend `qcam'
[21:07:16.285998] [dll] init: backend `qcam' is version 1.0.0
[21:07:16.286015] [dll] load: searching backend `plustek' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:16.286033] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-plustek.so.1'
[21:07:16.286057] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-plustek.so.1'
[21:07:16.286298] [dll] init: initializing backend `plustek'
[21:07:16.286692] [dll] init: backend `plustek' is version 1.0.0
[21:07:16.286714] [dll] load: searching backend `pixma' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:16.286733] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pixma.so.1'
[21:07:16.286757] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-pixma.so.1'
[21:07:16.287067] [dll] init: initializing backend `pixma'
[21:07:16.287191] [dll] init: backend `pixma' is version 1.0.28
[21:07:16.808467] [dll] load: searching backend `pint' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:16.808518] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pint.so.1'
[21:07:16.808551] [dll] load: couldn't open `/usr/lib/x86_64-linux-gnu/sane/libsane-pint.so.1' (No such file or directory)
[21:07:16.808569] [dll] load: trying to load `/usr/lib/sane/libsane-pint.so.1'
[21:07:16.808591] [dll] load: couldn't open `/usr/lib/sane/libsane-pint.so.1' (No such file or directory)
[21:07:16.808606] [dll] load: trying to load `/usr/lib64/sane/libsane-pint.so.1'
[21:07:16.808629] [dll] load: couldn't open `/usr/lib64/sane/libsane-pint.so.1' (No such file or directory)
[21:07:16.808645] [dll] load: couldn't find backend `pint' (No such file or directory)
[21:07:16.808665] [dll] load: searching backend `pieusb' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:16.808700] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pieusb.so.1'
[21:07:16.808732] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-pieusb.so.1'
[21:07:16.809142] [dll] init: initializing backend `pieusb'
[21:07:16.809297] [dll] init: backend `pieusb' is version 1.0.1
[21:07:16.809315] [dll] load: searching backend `pie' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:16.809332] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pie.so.1'
[21:07:16.809359] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-pie.so.1'
[21:07:16.809514] [dll] init: initializing backend `pie'
[21:07:16.809909] [dll] init: backend `pie' is version 1.0.9
[21:07:16.809930] [dll] load: searching backend `niash' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:16.809948] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-niash.so.1'
[21:07:16.809975] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-niash.so.1'
[21:07:16.810168] [dll] init: initializing backend `niash'
[21:07:16.810256] [dll] init: backend `niash' is version 1.0.1
[21:07:16.810274] [dll] load: searching backend `nec' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:16.810293] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-nec.so.1'
[21:07:16.810319] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-nec.so.1'
[21:07:16.810471] [dll] init: initializing backend `nec'
[21:07:16.810660] [dll] init: backend `nec' is version 1.0.0
[21:07:16.810686] [dll] load: searching backend `mustek_usb2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:16.810705] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb2.so.1'
[21:07:16.810731] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb2.so.1'
[21:07:16.810949] [dll] init: initializing backend `mustek_usb2'
[21:07:16.810984] [dll] init: backend `mustek_usb2' is version 1.0.10
[21:07:16.811058] [dll] load: searching backend `mustek_usb' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:16.811073] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb.so.1'
[21:07:16.811101] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb.so.1'
[21:07:16.811305] [dll] init: initializing backend `mustek_usb'
[21:07:16.811434] [dll] init: backend `mustek_usb' is version 1.0.18
[21:07:16.811452] [dll] load: searching backend `mustek' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:16.811466] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek.so.1'
[21:07:16.811485] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek.so.1'
[21:07:16.811773] [dll] init: initializing backend `mustek'
[21:07:16.812300] [dll] init: backend `mustek' is version 1.0.138
[21:07:16.812327] [dll] load: searching backend `microtek2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:16.812345] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek2.so.1'
[21:07:16.812370] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek2.so.1'
[21:07:16.812543] [dll] init: initializing backend `microtek2'
[21:07:16.812821] [dll] init: backend `microtek2' is version 1.0.0
[21:07:16.812851] [dll] load: searching backend `microtek' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:16.812870] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek.so.1'
[21:07:16.812897] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek.so.1'
[21:07:16.813046] [dll] init: initializing backend `microtek'
[21:07:16.813301] [dll] init: backend `microtek' is version 1.0.0
[21:07:16.813321] [dll] load: searching backend `matsushita' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:16.813340] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-matsushita.so.1'
[21:07:16.813365] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-matsushita.so.1'
[21:07:16.813502] [dll] init: initializing backend `matsushita'
[21:07:16.813984] [dll] init: backend `matsushita' is version 1.0.7
[21:07:16.814003] [dll] load: searching backend `magicolor' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:16.814014] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-magicolor.so.1'
[21:07:16.814029] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-magicolor.so.1'
[21:07:16.817769] [dll] init: initializing backend `magicolor'
[21:07:16.817867] [dll] init: backend `magicolor' is version 1.0.1
[21:07:18.321556] [dll] load: searching backend `ma1509' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:18.321602] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ma1509.so.1'
[21:07:18.321630] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ma1509.so.1'
[21:07:18.321929] [dll] init: initializing backend `ma1509'
[21:07:18.322049] [dll] init: backend `ma1509' is version 1.0.3
[21:07:18.322067] [dll] load: searching backend `lexmark' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:18.322082] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-lexmark.so.1'
[21:07:18.322099] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-lexmark.so.1'
[21:07:18.322301] [dll] init: initializing backend `lexmark'
[21:07:18.322417] [dll] init: backend `lexmark' is version 1.0.32
[21:07:18.322499] [dll] load: searching backend `leo' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:18.322514] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-leo.so.1'
[21:07:18.322533] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-leo.so.1'
[21:07:18.322667] [dll] init: initializing backend `leo'
[21:07:18.323043] [dll] init: backend `leo' is version 1.0.11
[21:07:18.323065] [dll] load: searching backend `kvs40xx' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:18.323080] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs40xx.so.1'
[21:07:18.323098] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs40xx.so.1'
[21:07:18.323312] [dll] init: initializing backend `kvs40xx'
[21:07:18.323389] [dll] init: backend `kvs40xx' is version 1.0.1
[21:07:18.323599] [dll] load: searching backend `kvs20xx' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:18.323618] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs20xx.so.1'
[21:07:18.323637] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs20xx.so.1'
[21:07:18.323843] [dll] init: initializing backend `kvs20xx'
[21:07:18.323919] [dll] init: backend `kvs20xx' is version 1.0.2
[21:07:18.324297] [dll] load: searching backend `kvs1025' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:18.324313] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs1025.so.1'
[21:07:18.324332] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs1025.so.1'
[21:07:18.324549] [dll] init: initializing backend `kvs1025'
[21:07:18.324692] [dll] init: backend `kvs1025' is version 1.0.5
[21:07:18.324709] [dll] load: searching backend `kodakaio' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:18.324721] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kodakaio.so.1'
[21:07:18.324741] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kodakaio.so.1'
[21:07:18.326848] [dll] init: initializing backend `kodakaio'
[21:07:18.326949] [dll] init: backend `kodakaio' is version 1.0.3
[21:07:20.253702] [dll] load: searching backend `kodak' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:20.253746] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kodak.so.1'
[21:07:20.253781] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kodak.so.1'
[21:07:20.254064] [dll] init: initializing backend `kodak'
[21:07:20.254091] [dll] init: backend `kodak' is version 1.0.7
[21:07:20.254261] [dll] load: searching backend `ibm' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:20.254282] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ibm.so.1'
[21:07:20.254302] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ibm.so.1'
[21:07:20.254465] [dll] init: initializing backend `ibm'
[21:07:20.254647] [dll] init: backend `ibm' is version 1.0.0
[21:07:20.254665] [dll] load: searching backend `hs2p' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:20.254680] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hs2p.so.1'
[21:07:20.254698] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hs2p.so.1'
[21:07:20.254845] [dll] init: initializing backend `hs2p'
[21:07:20.255088] [dll] init: backend `hs2p' is version 1.0.0
[21:07:20.255106] [dll] load: searching backend `hpsj5s' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:20.255118] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hpsj5s.so.1'
[21:07:20.255135] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hpsj5s.so.1'
[21:07:20.255281] [dll] init: initializing backend `hpsj5s'
[21:07:20.255336] [dll] init: backend `hpsj5s' is version 1.0.3
[21:07:20.255351] [dll] load: searching backend `hpljm1005' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:20.255365] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hpljm1005.so.1'
[21:07:20.255382] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hpljm1005.so.1'
[21:07:20.255584] [dll] init: initializing backend `hpljm1005'
[21:07:20.255671] [dll] init: backend `hpljm1005' is version 1.0.1
[21:07:20.255686] [dll] load: searching backend `hp5590' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:20.255700] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5590.so.1'
[21:07:20.255720] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5590.so.1'
[21:07:20.255909] [dll] init: initializing backend `hp5590'
[21:07:20.255985] [dll] init: backend `hp5590' is version 1.0.8
[21:07:20.256001] [dll] load: searching backend `hp5400' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:20.256015] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5400.so.1'
[21:07:20.256034] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5400.so.1'
[21:07:20.256220] [dll] init: initializing backend `hp5400'
[21:07:20.256321] [dll] init: backend `hp5400' is version 1.0.3
[21:07:20.256339] [dll] load: searching backend `hp4200' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:20.256352] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp4200.so.1'
[21:07:20.256373] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp4200.so.1'
[21:07:20.256563] [dll] init: initializing backend `hp4200'
[21:07:20.256667] [dll] init: backend `hp4200' is version 1.0.0
[21:07:20.256706] [dll] load: searching backend `hp3900' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:20.256725] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3900.so.1'
[21:07:20.256745] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3900.so.1'
[21:07:20.257478] [dll] init: initializing backend `hp3900'
[21:07:20.257597] [dll] init: backend `hp3900' is version 1.0.0
[21:07:20.257613] [dll] load: searching backend `hp3500' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:20.257627] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3500.so.1'
[21:07:20.257645] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3500.so.1'
[21:07:20.257840] [dll] init: initializing backend `hp3500'
[21:07:20.257916] [dll] init: backend `hp3500' is version 1.0.0
[21:07:20.257935] [dll] load: searching backend `hp' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:20.257948] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp.so.1'
[21:07:20.257966] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp.so.1'
[21:07:20.258228] [dll] init: initializing backend `hp'
[21:07:20.258259] [dll] init: backend `hp' is version 1.0.8
[21:07:20.258597] [dll] load: searching backend `gt68xx' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:20.258617] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-gt68xx.so.1'
[21:07:20.258636] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-gt68xx.so.1'
[21:07:20.258846] [dll] init: initializing backend `gt68xx'
[21:07:20.259033] [dll] init: backend `gt68xx' is version 1.0.84
[21:07:20.259198] [dll] load: searching backend `genesys' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:20.259212] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-genesys.so.1'
[21:07:20.259230] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-genesys.so.1'
[21:07:20.260336] [dll] init: initializing backend `genesys'
[21:07:20.261314] [dll] init: backend `genesys' is version 1.0.0
[21:07:20.261494] [dll] load: searching backend `fujitsu' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:20.261510] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-fujitsu.so.1'
[21:07:20.261530] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-fujitsu.so.1'
[21:07:20.261808] [dll] init: initializing backend `fujitsu'
[21:07:20.261855] [dll] init: backend `fujitsu' is version 1.0.136
[21:07:20.262104] [dll] load: searching backend `escl' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:20.262122] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-escl.so.1'
[21:07:20.262141] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-escl.so.1'
[21:07:20.284194] [dll] init: initializing backend `escl'
[21:07:20.284330] [dll] init: backend `escl' is version 1.0.0
[21:07:21.300964] [dll] load: searching backend `epsonds' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:21.301008] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-epsonds.so.1'
[21:07:21.301036] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-epsonds.so.1'
[21:07:21.301491] [dll] init: initializing backend `epsonds'
[21:07:21.301592] [dll] init: backend `epsonds' is version 1.0.0
[21:07:21.301646] [dll] load: searching backend `epson2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:21.301662] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-epson2.so.1'
[21:07:21.301686] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-epson2.so.1'
[21:07:21.301963] [dll] init: initializing backend `epson2'
[21:07:21.302042] [dll] init: backend `epson2' is version 1.0.124
[21:07:22.303348] [dll] load: searching backend `epjitsu' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:22.303394] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-epjitsu.so.1'
[21:07:22.303433] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-epjitsu.so.1'
[21:07:22.303782] [dll] init: initializing backend `epjitsu'
[21:07:22.303812] [dll] init: backend `epjitsu' is version 1.0.31
[21:07:22.303943] [dll] load: searching backend `dmc' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:22.303961] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-dmc.so.1'
[21:07:22.303986] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-dmc.so.1'
[21:07:22.304154] [dll] init: initializing backend `dmc'
[21:07:22.304372] [dll] init: backend `dmc' is version 1.0.0
[21:07:22.304393] [dll] load: searching backend `dell1600n_net' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:22.304411] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-dell1600n_net.so.1'
[21:07:22.304437] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-dell1600n_net.so.1'
[21:07:22.304699] [dll] init: initializing backend `dell1600n_net'
[21:07:22.304723] [dll] init: backend `dell1600n_net' is version 1.0.0
[21:07:22.605190] [dll] load: searching backend `coolscan3' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:22.605241] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan3.so.1'
[21:07:22.605272] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan3.so.1'
[21:07:22.605645] [dll] init: initializing backend `coolscan3'
[21:07:22.605752] [dll] init: backend `coolscan3' is version 1.0.0
[21:07:22.605911] [dll] load: searching backend `coolscan' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:22.605932] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan.so.1'
[21:07:22.605960] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan.so.1'
[21:07:22.606202] [dll] init: initializing backend `coolscan'
[21:07:22.606460] [dll] init: backend `coolscan' is version 1.0.0
[21:07:22.606480] [dll] load: searching backend `cardscan' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:22.606498] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-cardscan.so.1'
[21:07:22.606523] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-cardscan.so.1'
[21:07:22.606738] [dll] init: initializing backend `cardscan'
[21:07:22.606824] [dll] init: backend `cardscan' is version 1.0.3
[21:07:22.606872] [dll] load: searching backend `canon_lide70' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:22.606888] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon_lide70.so.1'
[21:07:22.606913] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon_lide70.so.1'
[21:07:22.607128] [dll] init: initializing backend `canon_lide70'
[21:07:22.607228] [dll] init: backend `canon_lide70' is version 1.0.0
[21:07:22.607249] [dll] load: searching backend `canon_dr' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:22.607261] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon_dr.so.1'
[21:07:22.607287] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon_dr.so.1'
[21:07:22.607514] [dll] init: initializing backend `canon_dr'
[21:07:22.607548] [dll] init: backend `canon_dr' is version 1.0.58
[21:07:22.607841] [dll] load: searching backend `canon630u' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:22.607862] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon630u.so.1'
[21:07:22.607890] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon630u.so.1'
[21:07:22.608130] [dll] init: initializing backend `canon630u'
[21:07:22.608242] [dll] init: backend `canon630u' is version 1.0.1
[21:07:22.608260] [dll] load: searching backend `canon' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:22.608277] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon.so.1'
[21:07:22.608303] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon.so.1'
[21:07:22.608479] [dll] init: initializing backend `canon'
[21:07:22.608630] [dll] init: backend `canon' is version 1.0.0
[21:07:22.608648] [dll] load: searching backend `bh' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:22.608663] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-bh.so.1'
[21:07:22.608705] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-bh.so.1'
[21:07:22.608856] [dll] init: initializing backend `bh'
[21:07:22.609118] [dll] init: backend `bh' is version 1.0.4
[21:07:22.609141] [dll] load: searching backend `avision' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:22.609158] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-avision.so.1'
[21:07:22.609184] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-avision.so.1'
[21:07:22.609419] [dll] init: initializing backend `avision'
[21:07:22.613334] [dll] init: backend `avision' is version 1.0.297
[21:07:22.617262] [dll] load: searching backend `as6e' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:22.617286] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-as6e.so.1'
[21:07:22.617302] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-as6e.so.1'
[21:07:22.617478] [dll] init: initializing backend `as6e'
[21:07:22.617513] [dll] load: searching backend `artec_eplus48u' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:22.617526] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-artec_eplus48u.so.1'
[21:07:22.617548] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-artec_eplus48u.so.1'
[21:07:22.617780] [dll] init: initializing backend `artec_eplus48u'
[21:07:22.618016] [dll] init: backend `artec_eplus48u' is version 1.0.0
[21:07:22.618035] [dll] load: searching backend `artec' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:22.618047] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-artec.so.1'
[21:07:22.618065] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-artec.so.1'
[21:07:22.618223] [dll] init: initializing backend `artec'
[21:07:22.618477] [dll] init: backend `artec' is version 1.0.0
[21:07:22.618496] [dll] load: searching backend `apple' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:22.618509] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-apple.so.1'
[21:07:22.618526] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-apple.so.1'
[21:07:22.618676] [dll] init: initializing backend `apple'
[21:07:22.618907] [dll] init: backend `apple' is version 1.0.0
[21:07:22.618926] [dll] load: searching backend `agfafocus' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:22.618940] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-agfafocus.so.1'
[21:07:22.618964] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-agfafocus.so.1'
[21:07:22.619138] [dll] init: initializing backend `agfafocus'
[21:07:22.619319] [dll] init: backend `agfafocus' is version 1.0.0
[21:07:22.619339] [dll] load: searching backend `abaton' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:22.619354] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-abaton.so.1'
[21:07:22.619379] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-abaton.so.1'
[21:07:22.619536] [dll] init: initializing backend `abaton'
[21:07:22.619822] [dll] init: backend `abaton' is version 1.0.0
[21:07:22.619851] [dll] load: searching backend `net' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[21:07:22.619869] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-net.so.1'
[21:07:22.619895] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-net.so.1'
[21:07:22.620235] [dll] init: initializing backend `net'
[21:07:22.623384] [dll] init: backend `net' is version 1.0.31
[21:07:22.623421] [dll] sane_get_devices: found 0 devices

No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
[21:07:22.623444] [dll] sane_exit: exiting
[21:07:22.623456] [dll] sane_exit: calling backend `xerox_mfp's exit function
[21:07:22.623613] [dll] sane_exit: calling backend `umax1220u's exit function
[21:07:22.623710] [dll] sane_exit: calling backend `umax's exit function
[21:07:22.623805] [dll] sane_exit: calling backend `u12's exit function
[21:07:22.623903] [dll] sane_exit: calling backend `teco3's exit function
[21:07:22.623986] [dll] sane_exit: calling backend `teco2's exit function
[21:07:22.624070] [dll] sane_exit: calling backend `teco1's exit function
[21:07:22.624150] [dll] sane_exit: calling backend `tamarack's exit function
[21:07:22.624228] [dll] sane_exit: calling backend `sp15c's exit function
[21:07:22.624307] [dll] sane_exit: calling backend `snapscan's exit function
[21:07:22.624393] [dll] sane_exit: calling backend `sm3840's exit function
[21:07:22.624474] [dll] sane_exit: calling backend `sm3600's exit function
[21:07:22.624558] [dll] sane_exit: calling backend `sharp's exit function
[21:07:22.624637] [dll] sane_exit: calling backend `sceptre's exit function
[21:07:22.624731] [dll] sane_exit: calling backend `s9036's exit function
[21:07:22.624808] [dll] sane_exit: calling backend `rts8891's exit function
[21:07:22.624887] [dll] sane_exit: calling backend `ricoh2's exit function
[21:07:22.624966] [dll] sane_exit: calling backend `ricoh's exit function
[21:07:22.625038] [dll] sane_exit: calling backend `qcam's exit function
[21:07:22.625117] [dll] sane_exit: calling backend `plustek's exit function
[21:07:22.625201] [dll] sane_exit: calling backend `pixma's exit function
[21:07:22.625290] [dll] sane_exit: calling backend `pieusb's exit function
[21:07:22.625373] [dll] sane_exit: calling backend `pie's exit function
[21:07:22.625450] [dll] sane_exit: calling backend `niash's exit function
[21:07:22.625555] [dll] sane_exit: calling backend `nec's exit function
[21:07:22.625631] [dll] sane_exit: calling backend `mustek_usb2's exit function
[21:07:22.625710] [dll] sane_exit: calling backend `mustek_usb's exit function
[21:07:22.625788] [dll] sane_exit: calling backend `mustek's exit function
[21:07:22.625874] [dll] sane_exit: calling backend `microtek2's exit function
[21:07:22.625955] [dll] sane_exit: calling backend `microtek's exit function
[21:07:22.626033] [dll] sane_exit: calling backend `matsushita's exit function
[21:07:22.626103] [dll] sane_exit: calling backend `magicolor's exit function
[21:07:22.626247] [dll] sane_exit: calling backend `ma1509's exit function
[21:07:22.626328] [dll] sane_exit: calling backend `lexmark's exit function
[21:07:22.626406] [dll] sane_exit: calling backend `leo's exit function
[21:07:22.626476] [dll] sane_exit: calling backend `kvs40xx's exit function
[21:07:22.626555] [dll] sane_exit: calling backend `kvs20xx's exit function
[21:07:22.626650] [dll] sane_exit: calling backend `kvs1025's exit function
[21:07:22.626733] [dll] sane_exit: calling backend `kodakaio's exit function
[21:07:22.626824] [dll] sane_exit: calling backend `kodak's exit function
[21:07:22.626903] [dll] sane_exit: calling backend `ibm's exit function
[21:07:22.626976] [dll] sane_exit: calling backend `hs2p's exit function
[21:07:22.627059] [dll] sane_exit: calling backend `hpsj5s's exit function
[21:07:22.627156] [dll] sane_exit: calling backend `hpljm1005's exit function
[21:07:22.627231] [dll] sane_exit: calling backend `hp5590's exit function
[21:07:22.627309] [dll] sane_exit: calling backend `hp5400's exit function
[21:07:22.627385] [dll] sane_exit: calling backend `hp4200's exit function
[21:07:22.627460] [dll] sane_exit: calling backend `hp3900's exit function
[21:07:22.627549] [dll] sane_exit: calling backend `hp3500's exit function
[21:07:22.627627] [dll] sane_exit: calling backend `hp's exit function
[21:07:22.627705] [dll] sane_exit: calling backend `gt68xx's exit function
[21:07:22.627785] [dll] sane_exit: calling backend `genesys's exit function
[21:07:22.627987] [dll] sane_exit: calling backend `fujitsu's exit function
[21:07:22.628079] [dll] sane_exit: calling backend `escl's exit function
[21:07:22.628861] [dll] sane_exit: calling backend `epsonds's exit function
[21:07:22.628938] [dll] sane_exit: calling backend `epson2's exit function
[21:07:22.629013] [dll] sane_exit: calling backend `epjitsu's exit function
[21:07:22.629081] [dll] sane_exit: calling backend `dmc's exit function
[21:07:22.629140] [dll] sane_exit: calling backend `dell1600n_net's exit function
[21:07:22.629199] [dll] sane_exit: calling backend `coolscan3's exit function
[21:07:22.629263] [dll] sane_exit: calling backend `coolscan's exit function
[21:07:22.629329] [dll] sane_exit: calling backend `cardscan's exit function
[21:07:22.629394] [dll] sane_exit: calling backend `canon_lide70's exit function
[21:07:22.629453] [dll] sane_exit: calling backend `canon_dr's exit function
[21:07:22.629518] [dll] sane_exit: calling backend `canon630u's exit function
[21:07:22.629593] [dll] sane_exit: calling backend `canon's exit function
[21:07:22.629660] [dll] sane_exit: calling backend `bh's exit function
[21:07:22.629716] [dll] sane_exit: calling backend `avision's exit function
[21:07:22.629806] [dll] sane_exit: calling backend `artec_eplus48u's exit function
[21:07:22.629867] [dll] sane_exit: calling backend `artec's exit function
[21:07:22.629927] [dll] sane_exit: calling backend `apple's exit function
[21:07:22.629983] [dll] sane_exit: calling backend `agfafocus's exit function
[21:07:22.630039] [dll] sane_exit: calling backend `abaton's exit function
[21:07:22.630095] [dll] sane_exit: calling backend `net's exit function
[21:07:22.630921] [dll] sane_exit: finished


zemog@zemogcoolermaster:~$ xsane
Gtk-Message: 21:10:35.358: Failed to load module "canberra-gtk-module"

zemog@zemogcoolermaster:~$ cat /etc/sane.d/dll.conf |grep ricoh
ricoh
ricoh2

Candide dans ce domaine mais plein de bonne volonté.

Hors ligne

#48 02-07-2022 00:08:42

èfpé
Membre
Inscription : 10-07-2016

Re : Pilote pour Imprimante Ricoh Aficio SP 1000S (RESOLU)

Bonsoir zemog,

zemog a écrit :

(donc le scanner apparaît)


Non le scanner n'apparaît pas... C'est plutôt que l'utilisateur zemog est membre du groupe scanner.
Peux-tu modifier ton message #47 et poster proprement (voir wiki) commandes et retours ? Merci !

Hors ligne

#49 02-07-2022 14:37:14

gtalbot
Invité

Re : Pilote pour Imprimante Ricoh Aficio SP 1000S (RESOLU)

Croutons a écrit :

sane n'était pas installé quand la commande scanimage -L a été essayé



Exact. Dans #32, on peut lire:

zemog a écrit :



$ apt list --installed xsane sane
En train de lister... Fait
xsane/stable,now 0.999-10 amd64  [installé]

(...)
$ scanimage -L
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).



Gérard

#50 02-07-2022 19:37:23

zemog
Membre
Distrib. : Débian Bullseye (11)
Noyau : Linux 5.10.0.9 amd64
(G)UI : gnome 3.38.5
Inscription : 09-07-2017

Re : Pilote pour Imprimante Ricoh Aficio SP 1000S (RESOLU)

Fil RESOLU

Candide dans ce domaine mais plein de bonne volonté.

Hors ligne

Pied de page des forums