logo Debian Debian Debian-France Debian-Facile Debian-fr.org Forum-Debian.fr Debian ? Communautés logo inclusivité

Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#1 Re : Matériel » [Résolu] resolution non disponible » 08-08-2021 10:28:57

rainer
Pour répondre à ta remarque :

Le mode actuel (0x24b) impose une fréquence d'horloge inutilement élevée (135 MHz, le maximum)



si je prends l'information de l'écran il m'affiche qu'il tourne à  H: 80kHz et V: 75 Hz, ce qu'il fait fait sur mageia aussi. Si je passe à 60 hz de rafraîchissement l'image est moins nette
Dans nvidia-settings le rafraîchissement est réglé sur 'Auto'

#2 Re : Matériel » [Résolu] resolution non disponible » 07-08-2021 21:24:28

rainer

$ xrandr --verbose


Screen 0: minimum 8 x 8, current 1280 x 1024, maximum 4096 x 4096
VGA-0 connected primary 1280x1024+0+0 (0x24b) normal (normal left inverted right x axis y axis) 0mm x 0mm
  Identifier: 0x23b
  Timestamp:  14508161
  Subpixel:   unknown
  Gamma:      1.0:1.0:1.0
  Brightness: 1.0
  Clones:    
  CRTC:       0
  CRTCs:      0 1
  Transform:  1.000000 0.000000 0.000000
              0.000000 1.000000 0.000000
              0.000000 0.000000 1.000000
             filter:
  SignalFormat: VGA
    supported: VGA
  ConnectorType: VGA
  ConnectorNumber: 0
  _ConnectorLocation: 0
  1024x768 (0x23c) 78.750MHz +HSync +VSync +preferred
        h: width  1024 start 1040 end 1136 total 1312 skew    0 clock  60.02KHz
        v: height  768 start  769 end  772 total  800           clock  75.03Hz
  1920x1200 (0x23d) 154.000MHz +HSync -VSync
        h: width  1920 start 1968 end 2000 total 2080 skew    0 clock  74.04KHz
        v: height 1200 start 1203 end 1209 total 1235           clock  59.95Hz
  1920x1080 (0x23e) 138.500MHz +HSync -VSync
        h: width  1920 start 1968 end 2000 total 2080 skew    0 clock  66.59KHz
        v: height 1080 start 1083 end 1088 total 1111           clock  59.93Hz
  1680x1050 (0x23f) 174.000MHz -HSync +VSync
        h: width  1680 start 1800 end 1976 total 2272 skew    0 clock  76.58KHz
        v: height 1050 start 1053 end 1059 total 1096           clock  69.88Hz
  1680x1050 (0x240) 146.250MHz -HSync +VSync
        h: width  1680 start 1784 end 1960 total 2240 skew    0 clock  65.29KHz
        v: height 1050 start 1053 end 1059 total 1089           clock  59.95Hz
  1680x1050 (0x241) 119.000MHz +HSync -VSync
        h: width  1680 start 1728 end 1760 total 1840 skew    0 clock  64.67KHz
        v: height 1050 start 1053 end 1059 total 1080           clock  59.88Hz
  1600x1200 (0x242) 175.500MHz +HSync +VSync
        h: width  1600 start 1664 end 1856 total 2160 skew    0 clock  81.25KHz
        v: height 1200 start 1201 end 1204 total 1250           clock  65.00Hz
  1600x1200 (0x243) 162.000MHz +HSync +VSync
        h: width  1600 start 1664 end 1856 total 2160 skew    0 clock  75.00KHz
        v: height 1200 start 1201 end 1204 total 1250           clock  60.00Hz
  1600x1024 (0x244) 103.125MHz +HSync +VSync
        h: width  1600 start 1600 end 1656 total 1664 skew    0 clock  61.97KHz
        v: height 1024 start 1024 end 1029 total 1030           clock  60.17Hz
  1440x900 (0x245) 106.500MHz -HSync +VSync
        h: width  1440 start 1520 end 1672 total 1904 skew    0 clock  55.93KHz
        v: height  900 start  903 end  909 total  934           clock  59.89Hz
  1400x1050 (0x246) 155.800MHz +HSync +VSync
        h: width  1400 start 1464 end 1784 total 1912 skew    0 clock  81.49KHz
        v: height 1050 start 1052 end 1064 total 1090           clock  74.76Hz
  1400x1050 (0x247) 145.060MHz -HSync +VSync
        h: width  1400 start 1496 end 1648 total 1896 skew    0 clock  76.51KHz
        v: height 1050 start 1051 end 1054 total 1093           clock  70.00Hz
  1400x1050 (0x248) 122.000MHz +HSync +VSync
        h: width  1400 start 1488 end 1640 total 1880 skew    0 clock  64.89KHz
        v: height 1050 start 1052 end 1064 total 1082           clock  59.98Hz
  1360x768 (0x249) 72.000MHz +HSync -VSync
        h: width  1360 start 1408 end 1440 total 1520 skew    0 clock  47.37KHz
        v: height  768 start  771 end  781 total  790           clock  59.96Hz
  1360x768 (0x24a) 84.750MHz -HSync +VSync
        h: width  1360 start 1432 end 1568 total 1776 skew    0 clock  47.72KHz
        v: height  768 start  771 end  781 total  798           clock  59.80Hz
  1280x1024 (0x24b) 135.000MHz +HSync +VSync *current
        h: width  1280 start 1296 end 1440 total 1688 skew    0 clock  79.98KHz
        v: height 1024 start 1025 end 1028 total 1066           clock  75.02Hz
  1280x1024 (0x24c) 108.000MHz +HSync +VSync
        h: width  1280 start 1328 end 1440 total 1688 skew    0 clock  63.98KHz
        v: height 1024 start 1025 end 1028 total 1066           clock  60.02Hz
  1280x960 (0x24d) 108.000MHz +HSync +VSync
        h: width  1280 start 1376 end 1488 total 1800 skew    0 clock  60.00KHz
        v: height  960 start  961 end  964 total 1000           clock  60.00Hz
  1152x864 (0x24e) 108.000MHz +HSync +VSync
        h: width  1152 start 1216 end 1344 total 1600 skew    0 clock  67.50KHz
        v: height  864 start  865 end  868 total  900           clock  75.00Hz
  1152x864 (0x24f) 104.990MHz -HSync +VSync
        h: width  1152 start 1224 end 1352 total 1552 skew    0 clock  67.65KHz
        v: height  864 start  865 end  868 total  902           clock  75.00Hz
  1152x864 (0x250) 96.770MHz -HSync +VSync
        h: width  1152 start 1224 end 1344 total 1536 skew    0 clock  63.00KHz
        v: height  864 start  865 end  868 total  900           clock  70.00Hz
  1152x864 (0x251) 81.620MHz -HSync +VSync
        h: width  1152 start 1216 end 1336 total 1520 skew    0 clock  53.70KHz
        v: height  864 start  865 end  868 total  895           clock  60.00Hz
  1024x768 (0x252) 75.000MHz -HSync -VSync
        h: width  1024 start 1048 end 1184 total 1328 skew    0 clock  56.48KHz
        v: height  768 start  771 end  777 total  806           clock  70.07Hz
  1024x768 (0x253) 65.000MHz -HSync -VSync
        h: width  1024 start 1048 end 1184 total 1344 skew    0 clock  48.36KHz
        v: height  768 start  771 end  777 total  806           clock  60.00Hz
  960x600 (0x254) 77.000MHz +HSync -VSync DoubleScan
        h: width   960 start  984 end 1000 total 1040 skew    0 clock  74.04KHz
        v: height  600 start  601 end  604 total  617           clock  60.00Hz
  960x540 (0x255) 69.250MHz +HSync -VSync DoubleScan
        h: width   960 start  984 end 1000 total 1040 skew    0 clock  66.59KHz
        v: height  540 start  541 end  544 total  555           clock  59.99Hz
  840x525 (0x256) 87.000MHz -HSync +VSync DoubleScan
        h: width   840 start  900 end  988 total 1136 skew    0 clock  76.58KHz
        v: height  525 start  526 end  529 total  548           clock  69.88Hz
  840x525 (0x257) 73.125MHz -HSync +VSync DoubleScan
        h: width   840 start  892 end  980 total 1120 skew    0 clock  65.29KHz
        v: height  525 start  526 end  529 total  544           clock  60.01Hz
  840x525 (0x258) 59.500MHz +HSync -VSync DoubleScan
        h: width   840 start  864 end  880 total  920 skew    0 clock  64.67KHz
        v: height  525 start  526 end  529 total  540           clock  59.88Hz
  832x624 (0x259) 57.284MHz -HSync -VSync
        h: width   832 start  864 end  928 total 1152 skew    0 clock  49.73KHz
        v: height  624 start  625 end  628 total  667           clock  74.55Hz
  800x600 (0x25a) 87.750MHz +HSync +VSync DoubleScan
        h: width   800 start  832 end  928 total 1080 skew    0 clock  81.25KHz
        v: height  600 start  600 end  602 total  625           clock  65.00Hz
  800x600 (0x25b) 81.000MHz +HSync +VSync DoubleScan
        h: width   800 start  832 end  928 total 1080 skew    0 clock  75.00KHz
        v: height  600 start  600 end  602 total  625           clock  60.00Hz
  800x600 (0x25c) 49.500MHz +HSync +VSync
        h: width   800 start  816 end  896 total 1056 skew    0 clock  46.88KHz
        v: height  600 start  601 end  604 total  625           clock  75.00Hz
  800x600 (0x25d) 50.000MHz +HSync +VSync
        h: width   800 start  856 end  976 total 1040 skew    0 clock  48.08KHz
        v: height  600 start  637 end  643 total  666           clock  72.19Hz
  800x600 (0x25e) 40.000MHz +HSync +VSync
        h: width   800 start  840 end  968 total 1056 skew    0 clock  37.88KHz
        v: height  600 start  601 end  605 total  628           clock  60.32Hz
  800x600 (0x25f) 36.000MHz +HSync +VSync
        h: width   800 start  824 end  896 total 1024 skew    0 clock  35.16KHz
        v: height  600 start  601 end  603 total  625           clock  56.25Hz
  800x512 (0x260) 51.562MHz +HSync +VSync DoubleScan
        h: width   800 start  800 end  828 total  832 skew    0 clock  61.97KHz
        v: height  512 start  512 end  514 total  515           clock  60.17Hz
  720x450 (0x261) 53.250MHz -HSync +VSync DoubleScan
        h: width   720 start  760 end  836 total  952 skew    0 clock  55.93KHz
        v: height  450 start  451 end  454 total  467           clock  59.89Hz
  680x384 (0x262) 36.000MHz +HSync -VSync DoubleScan
        h: width   680 start  704 end  720 total  760 skew    0 clock  47.37KHz
        v: height  384 start  385 end  390 total  395           clock  59.96Hz
  680x384 (0x263) 42.375MHz -HSync +VSync DoubleScan
        h: width   680 start  716 end  784 total  888 skew    0 clock  47.72KHz
        v: height  384 start  385 end  390 total  399           clock  59.80Hz
  640x512 (0x264) 67.500MHz +HSync +VSync DoubleScan
        h: width   640 start  648 end  720 total  844 skew    0 clock  79.98KHz
        v: height  512 start  512 end  514 total  533           clock  75.02Hz
  640x512 (0x265) 54.000MHz +HSync +VSync DoubleScan
        h: width   640 start  664 end  720 total  844 skew    0 clock  63.98KHz
        v: height  512 start  512 end  514 total  533           clock  60.02Hz
  640x480 (0x266) 54.000MHz +HSync +VSync DoubleScan
        h: width   640 start  688 end  744 total  900 skew    0 clock  60.00KHz
        v: height  480 start  480 end  482 total  500           clock  60.00Hz
  640x480 (0x267) 31.500MHz -HSync -VSync
        h: width   640 start  656 end  720 total  840 skew    0 clock  37.50KHz
        v: height  480 start  481 end  484 total  500           clock  75.00Hz
  640x480 (0x268) 31.500MHz -HSync -VSync
        h: width   640 start  664 end  704 total  832 skew    0 clock  37.86KHz
        v: height  480 start  489 end  492 total  520           clock  72.81Hz
  640x480 (0x269) 25.175MHz -HSync -VSync
        h: width   640 start  656 end  752 total  800 skew    0 clock  31.47KHz
        v: height  480 start  490 end  492 total  525           clock  59.94Hz
  576x432 (0x26a) 54.000MHz +HSync +VSync DoubleScan
        h: width   576 start  608 end  672 total  800 skew    0 clock  67.50KHz
        v: height  432 start  432 end  434 total  450           clock  75.00Hz
  576x432 (0x26b) 52.495MHz -HSync +VSync DoubleScan
        h: width   576 start  612 end  676 total  776 skew    0 clock  67.65KHz
        v: height  432 start  432 end  434 total  451           clock  75.00Hz
  576x432 (0x26c) 48.385MHz -HSync +VSync DoubleScan
        h: width   576 start  612 end  672 total  768 skew    0 clock  63.00KHz
        v: height  432 start  432 end  434 total  450           clock  70.00Hz
  576x432 (0x26d) 40.810MHz -HSync +VSync DoubleScan
        h: width   576 start  608 end  668 total  760 skew    0 clock  53.70KHz
        v: height  432 start  432 end  434 total  447           clock  60.06Hz
  512x384 (0x26e) 39.375MHz +HSync +VSync DoubleScan
        h: width   512 start  520 end  568 total  656 skew    0 clock  60.02KHz
        v: height  384 start  384 end  386 total  400           clock  75.03Hz
  512x384 (0x26f) 37.500MHz -HSync -VSync DoubleScan
        h: width   512 start  524 end  592 total  664 skew    0 clock  56.48KHz
        v: height  384 start  385 end  388 total  403           clock  70.07Hz
  512x384 (0x270) 32.500MHz -HSync -VSync DoubleScan
        h: width   512 start  524 end  592 total  672 skew    0 clock  48.36KHz
        v: height  384 start  385 end  388 total  403           clock  60.00Hz
  416x312 (0x271) 28.642MHz -HSync -VSync DoubleScan
        h: width   416 start  432 end  464 total  576 skew    0 clock  49.73KHz
        v: height  312 start  312 end  314 total  333           clock  74.66Hz
  400x300 (0x272) 24.750MHz +HSync +VSync DoubleScan
        h: width   400 start  408 end  448 total  528 skew    0 clock  46.88KHz
        v: height  300 start  300 end  302 total  312           clock  75.12Hz
  400x300 (0x273) 25.000MHz +HSync +VSync DoubleScan
        h: width   400 start  428 end  488 total  520 skew    0 clock  48.08KHz
        v: height  300 start  318 end  321 total  333           clock  72.19Hz
  400x300 (0x274) 20.000MHz +HSync +VSync DoubleScan
        h: width   400 start  420 end  484 total  528 skew    0 clock  37.88KHz
        v: height  300 start  300 end  302 total  314           clock  60.32Hz
  400x300 (0x275) 18.000MHz +HSync +VSync DoubleScan
        h: width   400 start  412 end  448 total  512 skew    0 clock  35.16KHz
        v: height  300 start  300 end  301 total  312           clock  56.34Hz
  320x240 (0x276) 15.750MHz -HSync -VSync DoubleScan
        h: width   320 start  328 end  360 total  420 skew    0 clock  37.50KHz
        v: height  240 start  240 end  242 total  250           clock  75.00Hz
  320x240 (0x277) 15.750MHz -HSync -VSync DoubleScan
        h: width   320 start  332 end  352 total  416 skew    0 clock  37.86KHz
        v: height  240 start  244 end  246 total  260           clock  72.81Hz
  320x240 (0x278) 12.587MHz -HSync -VSync DoubleScan
        h: width   320 start  328 end  376 total  400 skew    0 clock  31.47KHz
        v: height  240 start  245 end  246 total  262           clock  60.05Hz
 


ou est-ce que nvidia a trouvé tout ça ????

#3 Re : Matériel » [Résolu] resolution non disponible » 07-08-2021 18:27:09

rainer
bonsoir,
J'utilise le dernier xorg.conf crée par nvidia-settings, celui que j'ai mis dans le post #45

#4 Re : Matériel » [Résolu] resolution non disponible » 07-08-2021 10:56:02

rainer
Eureka !!
le fichier xorg.conf marche ! J'ai la résolution 1280x1024, et l'image et bien plus nette. Du coup j'ai un choix terrible dans nvidia-settings. Je peux aller jusqu'à 1920x1200 . J'ai ouvert "nvidia-settings" en root choisi 1280x1024 et enregistré le fichier de configuration qui s'affichait être /etc/X11/xorg.conf, alors qu'avant ce champ était vide. Voici donc la version crée par nvidia-settings :

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 304.134  (buildd@debian)  Fri Jan 13 04:41:10 UTC 2017

# **********************************************************************
# Refer to the xorg.conf man page for details about the format of
# this file.
# **********************************************************************

Section "ServerLayout"
    Identifier     "layout1"
    Screen      0  "Screen0" 0 0
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
    Option         "Xinerama" "0"
EndSection

Section "Module"
    Load           "v4l" # Video for Linux
EndSection

Section "ServerFlags"
# allows the server to start up even if the mouse does not work
    #DontZoom # disable <Ctrl><Alt><KP_+>/<KP_-> (resolution switching)
    Option         "allowmouseopenfail"
    Option         "DontZap" "False" # disable <Ctrl><Alt><BS> (server abort)
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "Monitor"
    Identifier     "monitor1"
    VendorName     "Acer"
    ModelName      "Acer AL1716"
    HorizSync       30.0 - 81.0
    VertRefresh     55.0 - 75.0
    ModeLine       "1024x768" 78.525 1024 1049 1145 1312 768 769 772 800 +hsync +vsync
    ModeLine       "800x600" 62.357 800 821 901 1040 600 601 604 632 +hsync +vsync
    ModeLine       "640x480" 49.886 640 661 725 832 480 481 484 514 +hsync +vsync
    ModeLine       "832x624" 57 832 876 940 1152 624 625 628 667 -hsync -vsync
    ModeLine       "800x600" 100 800 816 824 840 600 616 624 640 -hsync -vsync
    ModeLine       "1152x768" 78.741 1152 1173 1269 1440 768 769 772 800 +vsync
    ModeLine       "1024x768" 65 1024 1032 1176 1344 768 771 777 806 -hsync -vsync
    ModeLine       "1024x768" 65 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
    ModeLine       "1024x768" 112.62 1024 1076 1248 1420 768 768 780 808 +hsync +vsync
    ModeLine       "1280x1024" 135 1280 1288 1392 1664 1024 1027 1030 1064
    ModeLine       "1280x1024" 134.989 1280 1317 1429 1688 1024 1025 1028 1066 +hsync +vsync
    ModeLine       "768x576" 50.00 768 832 846 1000 576 590 595 630
    ModeLine       "768x576" 63.07 768 800 960 1024 576 578 590 616
    Option         "PreferredMode" "1280x1024"
    # Apple iMac modes
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "CRT-0"
    HorizSync       30.0 - 81.0
    VertRefresh     55.0 - 75.0
EndSection

Section "Device"
    Identifier     "device1"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "NVIDIA GeForce 6100 to GeForce 7950"
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 7025 / nForce 630a"
EndSection

Section "Screen"
    Identifier     "screen1"
    Device         "device1"
    Monitor        "monitor1"
    DefaultDepth    24
    SubSection     "Display"
        Depth       8
        Modes      "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "640x480" "480x360" "320x240"
    EndSubSection
    SubSection     "Display"
        Depth       15
        Modes      "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "640x480" "480x360" "320x240"
    EndSubSection
    SubSection     "Display"
        Depth       16
        Modes      "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "640x480" "480x360" "320x240"
    EndSubSection
    SubSection     "Display"
        Depth       24
        Modes      "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "640x480" "480x360" "320x240"
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "Stereo" "0"
    Option         "nvidiaXineramaInfoOrder" "CRT-0"
    Option         "metamodes" "1280x1024 +0+0; 1152x864 +0+0; 1024x768 +0+0; 832x624 +0+0; 800x600 +0+0; 640x480 +0+0; 320x240 +0+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection


Merci pour votre aide et vos peines.

#5 Re : Matériel » [Résolu] resolution non disponible » 07-08-2021 10:32:42

rainer

~$ lsmod | grep drm


 253952  2 nvidia



C'est tout

#6 Re : Matériel » [Résolu] resolution non disponible » 06-08-2021 22:08:19

rainer
je reviens sur Debian : Donc dans /sys, j'ai le dossier /sys/drm mais pas drm_kms_helper. Dans /sys/drm/ il y a les dossiers  'holders', 'notes', qui est vide, 'parameters' et 'sections' et des fichiers.
Dans le dossier 'holders' il y a un lien vers 'nvidia'

#7 Re : Matériel » [Résolu] resolution non disponible » 06-08-2021 21:54:41

rainer
Bonsoir,
Merci pour tous vos efforts. je vais ce soir juste répondre à èfpé:
je viens de regarder dans /sys/module/ de mon mageia7, et effectivement j'ai le dossier drm_kms_helper, mais dans Debian9 il n'y a rien de tout ça donc ta commande

 echo edid/1280x1024.bin > /sys/module/drm_kms_helper/parameters/edid_firmwarene


peut pas marcher. Il ya bien un programme qui installe ces fichiers, qui me manquent depuis le debut ?
Pour les autres propositions je vais voir demain
merci encore

#8 Re : Matériel » [Résolu] resolution non disponible » 06-08-2021 10:59:52

rainer
Bonjour,
pour èfpé:

Parce que les données EDID sont corrompues ? Tu tentes le paramètre edid_firmware, cité en #22 ?


C'est chaud !! j'ai téléchargé linux-da0df92b57311aa1b26a2a90599ed16e1e968b90.tar.gz j'ai extrait l'archive, et maintenant que faut il faire ?
xorg.conf me semble plus simple mais comment l'écrire correctement ? Voici le fichier xorg.conf de Mageia7

# File generated by XFdrake (rev 262502)

# **********************************************************************
# Refer to the xorg.conf man page for details about the format of
# this file.
# **********************************************************************

Section "ServerFlags"
    AllowMouseOpenFail # allows the server to start up even if the mouse does not work
    #DontZoom # disable <Ctrl><Alt><KP_+>/<KP_-> (resolution switching)
    Option "DontZap" "False" # disable <Ctrl><Alt><BS> (server abort)
EndSection

Section "Module"
    Load "v4l" # Video for Linux
EndSection

Section "Monitor"
    Identifier "monitor1"
    VendorName "Acer"
    ModelName "Acer AL1716"
    HorizSync 30-81
    VertRefresh 55-75
    Option "PreferredMode" "1280x1024"
   
    # Apple iMac modes
    ModeLine "1024x768"   78.525 1024 1049 1145 1312   768  769  772  800 +hsync +vsync
    ModeLine "800x600"    62.357  800  821  901 1040   600  601  604  632 +hsync +vsync
    ModeLine "640x480"    49.886  640  661  725  832   480  481  484  514 +hsync +vsync
   
    # Apple monitors tend to do 832x624
    ModeLine "832x624"    57      832  876  940 1152   624  625  628  667 -hsync -vsync
   
    # Apple PowerBook G3
    ModeLine "800x600"    100     800  816  824  840   600  616  624  640 -hsync -vsync
   
    # Apple TI Powerbook
    ModeLine "1152x768"   78.741 1152 1173 1269 1440   768  769  772  800 +vsync +vsync
   
    # Pismo Firewire G3
    ModeLine "1024x768"   65     1024 1032 1176 1344   768  771  777  806 -hsync -vsync
   
    # iBook2
    ModeLine "1024x768"   65     1024 1048 1184 1344   768  771  777  806 -hsync -vsync
   
    # 17" Apple Studio Display
    ModeLine "1024x768"   112.62 1024 1076 1248 1420 768 768 780 808 +hsync +vsync
   
    # HiRes Apple Studio Display
    ModeLine "1280x1024"  135    1280 1288 1392 1664  1024 1027 1030 1064
   
    # Another variation
    ModeLine "1280x1024"  134.989 1280 1317 1429 1688  1024 1025 1028 1066 +hsync +vsync
   
    # TV fullscreen mode or DVD fullscreen output.
    # 768x576 @ 79 Hz, 50 kHz hsync
    ModeLine "768x576"     50.00  768  832  846 1000   576  590  595  630
   
    # 768x576 @ 100 Hz, 61.6 kHz hsync
    ModeLine "768x576"     63.07  768  800  960 1024   576  578  590  616
EndSection

Section "Device"
    Identifier "device1"
    VendorName "NVIDIA Corporation"
    BoardName "NVIDIA GeForce 6100 to GeForce 7950"
    Driver "nouveau"
    Option "DPMS"
EndSection

Section "Screen"
    Identifier "screen1"
    Device "device1"
    Monitor "monitor1"
    DefaultColorDepth 24
   
    Subsection "Display"
        Depth 8
        Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "640x480" "480x360" "320x240"
    EndSubsection
   
    Subsection "Display"
        Depth 15
        Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "640x480" "480x360" "320x240"
    EndSubsection
   
    Subsection "Display"
        Depth 16
        Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "640x480" "480x360" "320x240"
    EndSubsection
   
    Subsection "Display"
        Depth 24
        Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "640x480" "480x360" "320x240"
    EndSubsection
EndSection

Section "ServerLayout"
    Identifier "layout1"
    Screen "screen1"
EndSection



évidement il ne marche pas comme ça sur Debian9 puisque le driver est nvidia

pour anonyme: la commande donne :

~$ ls -l /sys/class/drm/
total 0
lrwxrwxrwx 1 root root    0 août   6 10:05 card0 -> ../../devices/pci0000:00/0000:00:0d.0/drm/card0
-r--r--r-- 1 root root 4096 août   6 10:05 version
 

#9 Re : Matériel » [Résolu] resolution non disponible » 05-08-2021 18:17:14

rainer
Bonsoir,

$ cat .local/share/xorg/Xorg.0.log | grep -iE "Monitor name:|Serial No:"
 


cat: .local/share/xorg/Xorg.0.log: Aucun fichier ou dossier de ce type
 



$ cat .local/share/xorg/Xorg.0.log | grep "Current Operating System:"


cat: .local/share/xorg/Xorg.0.log: Aucun fichier ou dossier de ce type
 



il n'y a rien sur cet ordinateur..... C'est vrai, Debian démarre à vitesse grand V

#10 Re : Matériel » [Résolu] resolution non disponible » 05-08-2021 15:34:32

rainer
Bonjour,
les commandes avec CRT-0 ne donnent rien
et

# ls -l /sys/class/drm/*/edid
ls: impossible d'accéder à '/sys/class/drm/*/edid': Aucun fichier ou dossier de ce type


non plus

#11 Re : Matériel » [Résolu] resolution non disponible » 04-08-2021 12:52:53

rainer
pardon j'ai oublié, j'ai installé Debian 9, la dernière encore soutenue avec laquel on peut installer le driver nvidia 304.137
mais c'était écrit dans le poste #1

#12 Re : Matériel » [Résolu] resolution non disponible » 03-08-2021 22:15:26

rainer
Bonsoir,
Pour rober2a la commande cat /var/log/Xorg.0.log donne:

[    20.068] (II) Module ABI versions:
[    20.068]  X.Org ANSI C Emulation: 0.4
[    20.068]  X.Org Video Driver: 23.0
[    20.068]  X.Org XInput driver : 24.1
[    20.068]  X.Org Server Extension : 10.0
[    20.071] (++) using VT number 7

[    20.071] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    20.072] (II) xfree86: Adding drm device (/dev/dri/card0)
[    20.077] (--) PCI:*(0:0:13:0) 10de:03d6:1849:03d6 rev 162, Mem @ 0xfa000000/16777216, 0xe0000000/268435456, 0xf9000000/16777216, BIOS @ 0x????????/131072
[    20.235] (II) LoadModule: "glx"
[    20.458] (II) Loading /usr/lib/xorg/modules/linux/libglx.so
[    21.331] (II) Module glx: vendor="NVIDIA Corporation"
[    21.331]  compiled for 4.0.2, module version = 1.0.0
[    21.331]  Module class: X.Org Server Extension
[    21.333] (II) NVIDIA GLX Module  304.137  Thu Sep 14 13:13:03 PDT 2017
[    21.333] (II) Applying OutputClass "nvidia" to /dev/dri/card0
[    21.333]  loading driver: nvidia
[    21.333] (==) Matched nvidia as autoconfigured driver 0
[    21.333] (==) Matched nouveau as autoconfigured driver 1
[    21.333] (==) Matched nv as autoconfigured driver 2
[    21.333] (==) Matched nouveau as autoconfigured driver 3
[    21.333] (==) Matched nv as autoconfigured driver 4
[    21.333] (==) Matched modesetting as autoconfigured driver 5
[    21.333] (==) Matched fbdev as autoconfigured driver 6
[    21.333] (==) Matched vesa as autoconfigured driver 7
[    21.333] (==) Assigned the driver to the xf86ConfigLayout
[    21.333] (II) LoadModule: "nvidia"
[    21.345] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    21.407] (II) Module nvidia: vendor="NVIDIA Corporation"
[    21.407]  compiled for 4.0.2, module version = 1.0.0
[    21.407]  Module class: X.Org Video Driver
[    21.418] (II) LoadModule: "nouveau"
[    21.419] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[    21.448] (II) Module nouveau: vendor="X.Org Foundation"
[    21.448]  compiled for 1.19.3, module version = 1.0.13
[    21.448]  Module class: X.Org Video Driver
[    21.448]  ABI class: X.Org Video Driver, version 23.0
[    21.449] (II) LoadModule: "nv"
[    21.456] (WW) Warning, couldn't open module nv
[    21.456] (II) UnloadModule: "nv"
[    21.456] (II) Unloading nv
[    21.456] (EE) Failed to load module "nv" (module does not exist, 0)
[    21.456] (II) LoadModule: "modesetting"
[    21.456] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    21.476] (II) Module modesetting: vendor="X.Org Foundation"
[    21.476]  compiled for 1.19.2, module version = 1.19.2
[    21.476]  Module class: X.Org Video Driver
[    21.477]  ABI class: X.Org Video Driver, version 23.0
[    21.477] (II) LoadModule: "fbdev"
[    21.477] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    21.499] (II) Module fbdev: vendor="X.Org Foundation"
[    21.499]  compiled for 1.19.0, module version = 0.4.4
[    21.499]  Module class: X.Org Video Driver
[    21.499]  ABI class: X.Org Video Driver, version 23.0
[    21.499] (II) LoadModule: "vesa"
[    21.503] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    21.522] (II) Module vesa: vendor="X.Org Foundation"
[    21.522]  compiled for 1.19.0, module version = 2.3.4
[    21.523]  Module class: X.Org Video Driver
[    21.523]  ABI class: X.Org Video Driver, version 23.0
[    21.524] (II) NVIDIA dlloader X Driver  304.137  Thu Sep 14 12:51:09 PDT 2017
[    21.524] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    21.525] (II) NOUVEAU driver Date:   Tue Sep 20 00:31:06 2016 -0400
[    21.525] (II) NOUVEAU driver for NVIDIA chipset families :
[    21.525]  RIVA TNT        (NV04)
[    21.526]  RIVA TNT2       (NV05)
[    21.526]  GeForce 256     (NV10)
[    21.526]  GeForce 2       (NV11, NV15)
[    21.526]  GeForce 4MX     (NV17, NV18)
[    21.526]  GeForce 3       (NV20)
[    21.526]  GeForce 4Ti     (NV25, NV28)
[    21.526]  GeForce FX      (NV3x)
[    21.526]  GeForce 6       (NV4x)
[    21.526]  GeForce 7       (G7x)
[    21.526]  GeForce 8       (G8x)
[    21.526]  GeForce GTX 200 (NVA0)
[    21.526]  GeForce GTX 400 (NVC0)
[    21.526] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    21.527] (II) FBDEV: driver for framebuffer: fbdev
[    21.527] (II) VESA: driver for VESA chipsets: vesa
[    21.551] (II) Loading sub module "fb"
[    21.551] (II) LoadModule: "fb"
[    21.551] (II) Loading /usr/lib/xorg/modules/libfb.so
[    21.570] (II) Module fb: vendor="X.Org Foundation"
[    21.570]  compiled for 1.19.2, module version = 1.0.0
[    21.570]  ABI class: X.Org ANSI C Emulation, version 0.4
[    21.570] (II) Loading sub module "wfb"
[    21.570] (II) LoadModule: "wfb"
[    21.570] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    21.572] (II) Module wfb: vendor="X.Org Foundation"
[    21.572]  compiled for 1.19.2, module version = 1.0.0
[    21.572]  ABI class: X.Org ANSI C Emulation, version 0.4
[    21.572] (II) Loading sub module "ramdac"
[    21.572] (II) LoadModule: "ramdac"
[    21.572] (II) Module "ramdac" already built-in
[    21.592] (WW) Falling back to old probe method for modesetting
[    21.592] (WW) Falling back to old probe method for fbdev
[    21.592] (II) Loading sub module "fbdevhw"
[    21.592] (II) LoadModule: "fbdevhw"
[    21.593] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    21.603] (II) Module fbdevhw: vendor="X.Org Foundation"
[    21.603]  compiled for 1.19.2, module version = 0.0.2
[    21.603]  ABI class: X.Org Video Driver, version 23.0
[    21.603] (EE) open /dev/fb0: No such file or directory
[    21.603] (WW) Falling back to old probe method for vesa
[    21.603] (II) NVIDIA(0): Creating default Display subsection in Screen section
  "Default Screen Section" for depth/fbbpp 24/32
[    21.603] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[    21.603] (==) NVIDIA(0): RGB weight 888
[    21.603] (==) NVIDIA(0): Default visual is TrueColor
[    21.603] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    21.603] (**) NVIDIA(0): Enabling 2D acceleration
[    22.340] (WW) NVIDIA(GPU-0): The EDID read for display device CRT-0 is invalid:
[    22.340] (WW) NVIDIA(GPU-0):     unrecognized EDID Header.
[    22.340] (--) NVIDIA(GPU-0):
[    22.340] (--) NVIDIA(GPU-0): Raw EDID bytes:
[    22.340] (--) NVIDIA(GPU-0):
[    22.340] (--) NVIDIA(GPU-0):   50 ff ff ff ff ff ff ff  ff ff ff ff ff ff ff ff
[    22.340] (--) NVIDIA(GPU-0):   1a 0f 01 03 08 22 1b 78  e8 e5 e5 a4 56 44 9f 23
[    22.340] (--) NVIDIA(GPU-0):   15 50 54 bf ef 00 01 01  01 01 01 01 01 01 01 01
[    22.340] (--) NVIDIA(GPU-0):   01 01 01 01 01 01 30 2a  00 98 51 00 2a 40 30 70
[    22.340] (--) NVIDIA(GPU-0):   13 00 52 0e 11 00 00 1e  00 00 00 fd 00 38 4b 1e
[    22.340] (--) NVIDIA(GPU-0):   53 0e 00 0a 20 20 20 20  20 20 00 00 00 ff 00 35
[    22.340] (--) NVIDIA(GPU-0):   32 35 30 31 33 41 38 50  59 30 32 0a 00 00 00 fc
[    22.340] (--) NVIDIA(GPU-0):   00 41 4c 31 37 31 36 0a  20 20 20 20 20 20 00 f3
[    22.340] (--) NVIDIA(GPU-0):
[    22.340] (--) NVIDIA(GPU-0):   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[    22.340] (--) NVIDIA(GPU-0):   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[    22.340] (--) NVIDIA(GPU-0):   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[    22.340] (--) NVIDIA(GPU-0):   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[    22.340] (--) NVIDIA(GPU-0):   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[    22.340] (--) NVIDIA(GPU-0):   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[    22.340] (--) NVIDIA(GPU-0):   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[    22.340] (--) NVIDIA(GPU-0):   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[    22.340] (--) NVIDIA(GPU-0):
[    22.353] (II) NVIDIA(0): NVIDIA GPU GeForce 7025 / nForce 630a (C61) at PCI:0:13:0
[    22.353] (II) NVIDIA(0):     (GPU-0)
[    22.353] (--) NVIDIA(0): Memory: 524288 kBytes
[    22.353] (--) NVIDIA(0): VideoBIOS: 05.61.32.28.01
[    22.353] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[    22.353] (--) NVIDIA(0): Valid display device(s) on GeForce 7025 / nForce 630a at PCI:0:13:0
[    22.353] (--) NVIDIA(0):     CRT-0 (connected)
[    22.353] (--) NVIDIA(0): CRT-0: 350.0 MHz maximum pixel clock
[    22.353] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    22.353] (**) NVIDIA(0):     device CRT-0 (Using EDID frequencies has been enabled on
[    22.353] (**) NVIDIA(0):     all display devices.)
[    22.373] (==) NVIDIA(0):
[    22.373] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[    22.373] (==) NVIDIA(0):     will be used as the requested mode.
[    22.373] (==) NVIDIA(0):
[    22.373] (II) NVIDIA(0): Validated MetaModes:
[    22.373] (II) NVIDIA(0):     "CRT-0:nvidia-auto-select"
[    22.373] (II) NVIDIA(0): Virtual screen size determined to be 1024 x 768
[    22.375] (WW) NVIDIA(0): Unable to support custom viewPortOut 1024 x 576 +0 +96
[    22.376] (WW) NVIDIA(0): Unable to get display device CRT-0'
s EDID; cannot compute DPI
[    22.376] (WW) NVIDIA(0):     from CRT-0's EDID.
[    22.376] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[    22.376] (II) UnloadModule: "nouveau"
[    22.376] (II) Unloading nouveau
[    22.376] (II) UnloadModule: "modesetting"
[    22.376] (II) Unloading modesetting
[    22.376] (II) UnloadModule: "fbdev"
[    22.376] (II) Unloading fbdev
[    22.376] (II) UnloadSubModule: "fbdevhw"
[    22.376] (II) Unloading fbdevhw
[    22.376] (II) UnloadModule: "vesa"
[    22.377] (II) Unloading vesa
[    22.377] (--) Depth 24 pixmap format is 32 bpp
[    22.401] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[    22.404] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[    22.404] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[    22.404] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[    22.404] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[    22.404] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[    22.404] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[    22.404] (II) NVIDIA(0):     Config Options in the README.
[    22.405] (II) NVIDIA(0): Setting mode "CRT-0:nvidia-auto-select"
[    22.694] (==) NVIDIA(0): Disabling shared memory pixmaps
[    22.694] (==) NVIDIA(0): Backing store enabled
[    22.694] (==) NVIDIA(0): Silken mouse enabled
[    22.710] (==) NVIDIA(0): DPMS enabled
[    22.711] (II) Loading sub module "dri2"
[    22.711] (II) LoadModule: "dri2"
[    22.711] (II) Module "dri2" already built-in
[    22.711] (II) NVIDIA(0): [DRI2] Setup complete
[    22.711] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[    22.712] (--) RandR disabled
[    22.723] (II) SELinux: Disabled on system
[    22.735] (II) Initializing extension GLX
[    22.735] (II) Indirect GLX disabled.(II) config/udev: Adding input device Power Button (/dev/input/event3)
[    23.115] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    23.115] (II) LoadModule: "libinput"
[    23.115] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    23.171] (II) Module libinput: vendor="X.Org Foundation"
[    23.171]  compiled for 1.19.0, module version = 0.23.0
[    23.171]  Module class: X.Org XInput Driver
[    23.171]  ABI class: X.Org XInput driver, version 24.1
[    23.171] (II) Using input driver '
libinput' for 'Power Button'
[    23.171] (**) Power Button: always reports core events
[    23.171] (**) Option "Device" "/dev/input/event3"
[    23.171] (**) Option "_source" "server/udev"
[    23.172] (II) input device '
Power Button', /dev/input/event3 is tagged by udev as: Keyboard
[    23.173] (II) input device '
Power Button', /dev/input/event3 is a keyboard
[    23.173] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[    23.173] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    23.173] (**) Option "xkb_model" "pc105"
[    23.173] (**) Option "xkb_layout" "fr"
[    23.173] (**) Option "xkb_variant" "latin9"
[    23.197] (II) input device '
Power Button', /dev/input/event3 is tagged by udev as: Keyboard
[    23.198] (II) input device '
Power Button', /dev/input/event3 is a keyboard
[    23.198] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    23.198] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    23.198] (II) Using input driver '
libinput' for 'Power Button'
[    23.198] (**) Power Button: always reports core events
[    23.198] (**) Option "Device" "/dev/input/event2"
[    23.198] (**) Option "_source" "server/udev"
[    23.198] (II) input device '
Power Button', /dev/input/event2 is tagged by udev as: Keyboard
[    23.198] (II) input device '
Power Button', /dev/input/event2 is a keyboard
[    23.198] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2"
[    23.198] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    23.198] (**) Option "xkb_model" "pc105"
[    23.198] (**) Option "xkb_layout" "fr"
[    23.198] (**) Option "xkb_variant" "latin9"
[    23.199] (II) input device '
Power Button', /dev/input/event2 is tagged by udev as: Keyboard
[    23.199] (II) input device '
Power Button', /dev/input/event2 is a keyboard
[    23.199] (II) config/udev: Adding input device Microsoft Microsoft IntelliMouse® Optical (/dev/input/event1)
[    23.199] (**) Microsoft Microsoft IntelliMouse® Optical: Applying InputClass "libinput pointer catchall"
[    23.199] (II) Using input driver '
libinput' for 'Microsoft Microsoft IntelliMouse® Optical'
[    23.199] (**) Microsoft Microsoft IntelliMouse® Optical: always reports core events
[    23.199] (**) Option "Device" "/dev/input/event1"
[    23.199] (**) Option "_source" "server/udev"
[    23.257] (II) input device '
Microsoft Microsoft IntelliMouse® Optical', /dev/input/event1 is tagged by udev as: Mouse
[    23.257] (II) input device '
Microsoft Microsoft IntelliMouse® Optical', /dev/input/event1 is a pointer caps
[    23.258] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.0/0003:045E:0039.0001/input/input1/event1"
[    23.258] (II) XINPUT: Adding extended input device "Microsoft Microsoft IntelliMouse® Optical" (type: MOUSE, id 8)
[    23.259] (**) Option "AccelerationScheme" "none"
[    23.259] (**) Microsoft Microsoft IntelliMouse® Optical: (accel) selected scheme none/0
[    23.259] (**) Microsoft Microsoft IntelliMouse® Optical: (accel) acceleration factor: 2.000
[    23.259] (**) Microsoft Microsoft IntelliMouse® Optical: (accel) acceleration threshold: 4
[    23.317] (II) input device '
Microsoft Microsoft IntelliMouse® Optical', /dev/input/event1 is tagged by udev as: Mouse
[    23.317] (II) input device '
Microsoft Microsoft IntelliMouse® Optical', /dev/input/event1 is a pointer caps
[    23.318] (II) config/udev: Adding input device Microsoft Microsoft IntelliMouse® Optical (/dev/input/mouse0)
[    23.318] (II) No input driver specified, ignoring this device.
[    23.318] (II) This device may have been added with another device file.
[    23.320] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    23.320] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[    23.320] (II) Using input driver '
libinput' for 'AT Translated Set 2 keyboard'
[    23.320] (**) AT Translated Set 2 keyboard: always reports core events
[    23.320] (**) Option "Device" "/dev/input/event0"
[    23.320] (**) Option "_source" "server/udev"
[    23.321] (II) input device '
AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[    23.321] (II) input device '
AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[    23.321] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    23.321] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[    23.321] (**) Option "xkb_model" "pc105"
[    23.321] (**) Option "xkb_layout" "fr"
[    23.321] (**) Option "xkb_variant" "latin9"
[    23.323] (II) input device '
AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[    23.323] (II) input device '
AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[    23.324] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[    23.324] (II) No input driver specified, ignoring this device.
[    23.324] (II) This device may have been added with another device file.
[    43.161] (WW) NVIDIA(GPU-0): The EDID read for display device CRT-0 is invalid:
[    43.161] (WW) NVIDIA(GPU-0):     unrecognized EDID Header.
[    43.161] (--) NVIDIA(GPU-0):
[    43.161] (--) NVIDIA(GPU-0): Raw EDID bytes:
[    43.161] (--) NVIDIA(GPU-0):
[    43.161] (--) NVIDIA(GPU-0):   50 ff ff ff ff ff ff ff  ff ff ff ff ff ff ff ff
[    43.161] (--) NVIDIA(GPU-0):   1a 0f 01 03 08 22 1b 78  e8 e5 e5 a4 56 44 9f 23
[    43.161] (--) NVIDIA(GPU-0):   15 50 54 bf ef 00 01 01  01 01 01 01 01 01 01 01
[    43.161] (--) NVIDIA(GPU-0):   01 01 01 01 01 01 30 2a  00 98 51 00 2a 40 30 70
[    43.161] (--) NVIDIA(GPU-0):   13 00 52 0e 11 00 00 1e  00 00 00 fd 00 38 4b 1e
[    43.161] (--) NVIDIA(GPU-0):   53 0e 00 0a 20 20 20 20  20 20 00 00 00 ff 00 35
[    43.161] (--) NVIDIA(GPU-0):   32 35 30 31 33 41 38 50  59 30 32 0a 00 00 00 fc
[    43.161] (--) NVIDIA(GPU-0):   00 41 4c 31 37 31 36 0a  20 20 20 20 20 20 00 f3
[    43.161] (--) NVIDIA(GPU-0):
[    43.161] (--) NVIDIA(GPU-0):   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[    43.161] (--) NVIDIA(GPU-0):   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[    43.161] (--) NVIDIA(GPU-0):   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[    43.161] (--) NVIDIA(GPU-0):   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[    43.161] (--) NVIDIA(GPU-0):   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[    43.161] (--) NVIDIA(GPU-0):   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[    43.161] (--) NVIDIA(GPU-0):   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[    43.161] (--) NVIDIA(GPU-0):   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[    43.161] (--) NVIDIA(GPU-0):
[    43.161] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    43.161] (**) NVIDIA(0):     device CRT-0 (Using EDID frequencies has been enabled on
[    43.161] (**) NVIDIA(0):     all display devices.)
[    43.283] (WW) NVIDIA(GPU-0): The EDID read for display device CRT-0 is invalid:
[    43.283] (WW) NVIDIA(GPU-0):     unrecognized EDID Header.
[    43.283] (--) NVIDIA(GPU-0):
[    43.283] (--) NVIDIA(GPU-0): Raw EDID bytes:
[    43.283] (--) NVIDIA(GPU-0):
[    43.283] (--) NVIDIA(GPU-0):   50 ff ff ff ff ff ff ff  ff ff ff ff ff ff ff ff
[    43.283] (--) NVIDIA(GPU-0):   1a 0f 01 03 08 22 1b 78  e8 e5 e5 a4 56 44 9f 23
[    43.283] (--) NVIDIA(GPU-0):   15 50 54 bf ef 00 01 01  01 01 01 01 01 01 01 01
[    43.283] (--) NVIDIA(GPU-0):   01 01 01 01 01 01 30 2a  00 98 51 00 2a 40 30 70
[    43.283] (--) NVIDIA(GPU-0):   13 00 52 0e 11 00 00 1e  00 00 00 fd 00 38 4b 1e
[    43.283] (--) NVIDIA(GPU-0):   53 0e 00 0a 20 20 20 20  20 20 00 00 00 ff 00 35
[    43.283] (--) NVIDIA(GPU-0):   32 35 30 31 33 41 38 50  59 30 32 0a 00 00 00 fc
[    43.283] (--) NVIDIA(GPU-0):   00 41 4c 31 37 31 36 0a  20 20 20 20 20 20 00 f3
[    43.283] (--) NVIDIA(GPU-0):
[    43.283] (--) NVIDIA(GPU-0):   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[    43.283] (--) NVIDIA(GPU-0):   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[    43.283] (--) NVIDIA(GPU-0):   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[    43.283] (--) NVIDIA(GPU-0):   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[    43.283] (--) NVIDIA(GPU-0):   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[    43.283] (--) NVIDIA(GPU-0):   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[    43.283] (--) NVIDIA(GPU-0):   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[    43.283] (--) NVIDIA(GPU-0):   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[    43.283] (--) NVIDIA(GPU-0):
[    43.283] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    43.283] (**) NVIDIA(0):     device CRT-0 (Using EDID frequencies has been enabled on
[    43.283] (**) NVIDIA(0):     all display devices.)
[    43.421] (WW) NVIDIA(GPU-0): The EDID read for display device CRT-0 is invalid:
[    43.421] (WW) NVIDIA(GPU-0):     unrecognized EDID Header.
[    43.421] (--) NVIDIA(GPU-0):
[    43.421] (--) NVIDIA(GPU-0): Raw EDID bytes:
[    43.421] (--) NVIDIA(GPU-0):
[    43.421] (--) NVIDIA(GPU-0):   50 ff ff ff ff ff ff ff  ff ff ff ff ff ff ff ff
[    43.421] (--) NVIDIA(GPU-0):   1a 0f 01 03 08 22 1b 78  e8 e5 e5 a4 56 44 9f 23
[    43.421] (--) NVIDIA(GPU-0):   15 50 54 bf ef 00 01 01  01 01 01 01 01 01 01 01
[    43.421] (--) NVIDIA(GPU-0):   01 01 01 01 01 01 30 2a  00 98 51 00 2a 40 30 70
[    43.421] (--) NVIDIA(GPU-0):   13 00 52 0e 11 00 00 1e  00 00 00 fd 00 38 4b 1e
[    43.421] (--) NVIDIA(GPU-0):   53 0e 00 0a 20 20 20 20  20 20 00 00 00 ff 00 35
[    43.421] (--) NVIDIA(GPU-0):   32 35 30 31 33 41 38 50  59 30 32 0a 00 00 00 fc
[    43.421] (--) NVIDIA(GPU-0):   00 41 4c 31 37 31 36 0a  20 20 20 20 20 20 00 f3
[    43.421] (--) NVIDIA(GPU-0):
[    43.421] (--) NVIDIA(GPU-0):   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[    43.421] (--) NVIDIA(GPU-0):   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[    43.421] (--) NVIDIA(GPU-0):   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[    43.421] (--) NVIDIA(GPU-0):   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[    43.421] (--) NVIDIA(GPU-0):   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[    43.421] (--) NVIDIA(GPU-0):   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[    43.421] (--) NVIDIA(GPU-0):   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[    43.421] (--) NVIDIA(GPU-0):   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[    43.421] (--) NVIDIA(GPU-0):
[    43.421] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    43.421] (**) NVIDIA(0):     device CRT-0 (Using EDID frequencies has been enabled on
[    43.421] (**) NVIDIA(0):     all display devices.)
[    43.536] (II) NVIDIA(0): Setting mode "VGA-0: 1152x864 @1152x864 +0+0"
[    46.892] (WW) NVIDIA(GPU-0): The EDID read for display device CRT-0 is invalid:
[    46.892] (WW) NVIDIA(GPU-0):     unrecognized EDID Header.
[    46.892] (--) NVIDIA(GPU-0):
[    46.892] (--) NVIDIA(GPU-0): Raw EDID bytes:
[    46.892] (--) NVIDIA(GPU-0):
[    46.892] (--) NVIDIA(GPU-0):   50 ff ff ff ff ff ff ff  ff ff ff ff ff ff ff ff
[    46.892] (--) NVIDIA(GPU-0):   1a 0f 01 03 08 22 1b 78  e8 e5 e5 a4 56 44 9f 23
[    46.892] (--) NVIDIA(GPU-0):   15 50 54 bf ef 00 01 01  01 01 01 01 01 01 01 01
[    46.892] (--) NVIDIA(GPU-0):   01 01 01 01 01 01 30 2a  00 98 51 00 2a 40 30 70
[    46.892] (--) NVIDIA(GPU-0):   13 00 52 0e 11 00 00 1e  00 00 00 fd 00 38 4b 1e
[    46.892] (--) NVIDIA(GPU-0):   53 0e 00 0a 20 20 20 20  20 20 00 00 00 ff 00 35
[    46.892] (--) NVIDIA(GPU-0):   32 35 30 31 33 41 38 50  59 30 32 0a 00 00 00 fc
[    46.892] (--) NVIDIA(GPU-0):   00 41 4c 31 37 31 36 0a  20 20 20 20 20 20 00 f3
[    46.892] (--) NVIDIA(GPU-0):
[    46.892] (--) NVIDIA(GPU-0):   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[    46.892] (--) NVIDIA(GPU-0):   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[    46.892] (--) NVIDIA(GPU-0):   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[    46.892] (--) NVIDIA(GPU-0):   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[    46.892] (--) NVIDIA(GPU-0):   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[    46.892] (--) NVIDIA(GPU-0):   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[    46.892] (--) NVIDIA(GPU-0):   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[    46.892] (--) NVIDIA(GPU-0):   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[    46.892] (--) NVIDIA(GPU-0):
[    46.892] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    46.892] (**) NVIDIA(0):     device CRT-0 (Using EDID frequencies has been enabled on
[    46.892] (**) NVIDIA(0):     all display devices.)


tu parle que cela a fonctionner sur un autre OS , même matériel (gpu + écran) ?


oui tout à fait .

pour èfpé:
la commande edid-decode /sys/class/drm/card0-VGA-0/edid donne

$ edid-decode /sys/class/drm/card0-VGA-0/edid
/sys/class/drm/card0-VGA-0/edid: No such file or directory
 



$ parse-edid </sys/class/drm/card0-VGA-0/edid
bash: /sys/class/drm/card0-VGA-0/edid: Aucun fichier ou dossier de ce type



j'ai essayer aussi nvidia-config, mais ça n'a rien donné juste un écran inconnu avec une résolution 640x480. J'ai donc supprimer le fichier /etc/X11/xorg.config fraîchement crée et j'ai retrouvé mon écran à 1152x864

#13 Re : Matériel » [Résolu] resolution non disponible » 03-08-2021 13:18:24

rainer

[    45.610] (WW) NVIDIA(GPU-0): The EDID read for display device CRT-0 is invalid:
[    45.610] (WW) NVIDIA(GPU-0):     unrecognized EDID Header.


je pense èfpé a raison :

L'origine du problème est que le pilote NVIDIA ne parvient pas décoder les données EDID de l'écran.



mais comment configurer l'écran ???

#14 Re : Matériel » [Résolu] resolution non disponible » 03-08-2021 09:50:57

rainer
il y a un logiciel pour configurer l'écran sous debian ? Où on peux choisir parmi les fabricants et les modèles ? J'ai un acer AL 1716 17" qui n'est pas jeune, mais j'ai toujours travaillé avec la résolution 1280x1024 et toujours sous Linux (Mandrake, Ubuntu et Mageia). J'ai été obligé de quitter Ubuntu parce que la dernière mis à jour 16.04 je crois, a fait capoter l'affichage. Avec Mageia 5 j'ai retrouvé mon écran 1280x1024 , Mageia 6 abandon, trop compliqué pour avoir un affichage correct, Mageia 7 je crois, mais je ne me souvient pas trop en fait, j'ai modifié le fichier /etc/X11/xorg.conf directement avec l'aide du forum pour' ajouter la résolution 1280x1024 .

#15 Re : Matériel » [Résolu] resolution non disponible » 03-08-2021 09:30:14

rainer
il n'y a qu'un seul écran et il est sur la sortie VGA-0

Dernière modification par rainer (Hier 14:17:40)

#16 Re : Matériel » [Résolu] resolution non disponible » 02-08-2021 15:37:28

rainer

je me souviens pas l'avoir vue sur ton fil ...



si , si un peu plus haut , mais voilà encore une fois :

~$ xrandr
Screen 0: minimum 8 x 8, current 1152 x 864, maximum 4096 x 4096
VGA-0 connected primary 1152x864+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
   1024x768      60.00 +
   1360x768      59.96    59.80  
   1152x864      60.00*
   800x600       72.19    60.32    56.25  
   680x384       59.96    59.80  
   640x480       59.94  
   576x432       60.06  
   512x384       60.00  
   400x300       72.19    60.32    56.34  
   320x240       60.05  
 


on peut bien ajouter une résolution qui n'est pas listé, c'est bien expliqué dans les tuto xrandr, et ce que j'ai fait sous Mageia 7 il y a 2ans. Et....ça marche !!! mais avec le driver nouveau sad

#17 Re : Matériel » [Résolu] resolution non disponible » 02-08-2021 13:09:28

rainer
il n'y a qu'un seul écran et il est sur la sortie VGA-0

#18 Re : Matériel » [Résolu] resolution non disponible » 02-08-2021 09:25:27

rainer
Bonjour,
J'ai bien relu les tutos sur xrandr mais le resultat est toujours le même :

$ xrandr --newmode "1280x1024_60.00"  109.00  1280 1368 1496 1712  1024 1027 1034 1063 -hsync +vsync
 


$ xrandr --addmode VGA-0 "1280x1024_60.00"
 


X Error of failed request:  BadMatch (invalid parameter attributes)
  Major opcode of failed request:  140 (RANDR)
  Minor opcode of failed request:  18 (RRAddOutputMode)
  Serial number of failed request:  23
  Current serial number in output stream:  24
 



c'est le même message avec ou sans le guillmets
Est-ce que quelqu'un sait ou nvidia-settings enregistre son fichier de configuration ?
peut-être qu'on peut directement modifier ce fichier ?

#19 Re : Matériel » [Résolu] resolution non disponible » 01-08-2021 10:04:22

rainer

 xrandr --newmode "1280x1024_60.00"  109.00  1280 1368 1496 1712  1024 1027 1034 1063 -hsync +vsync
 



jusque là , la syntaxe est la bonne ?

xrandr --addmode VGA-0 "1280x1024_60"
xrandr: cannot find mode "1280x1024_60"


dans man xrandr il ne met les guillemets

xrandr --addmode VGA-0 1280x1024
 


X Error of failed request:  BadMatch (invalid parameter attributes)
  Major opcode of failed request:  140 (RANDR)
  Minor opcode of failed request:  18 (RRAddOutputMode)
  Serial number of failed request:  23
  Current serial number in output stream:  24
 


il est ou le bins ????

#20 Re : Matériel » [Résolu] resolution non disponible » 31-07-2021 22:02:55

rainer
bonsoir,
d'accord, ce n'est pas la "super" carte graphique, mais au moins on peut afficher et modeler un projet sketchup, regarder un itinéraire sur viamichelin et autres truc "fascinant" encore que le driver nouveau me refuse d'afficher. Non je ne joue pas aux jeux 3D , pour ça je vais voir fiston.

revenons à ma résolution : c'est un écran externe et le "eDP-1" je l'ai copié sur le forum ne sachant pas ce que ça veut dire. On est sur "Debian-facile pour débutant". Donc si je comprends bien après "--addmode" faut ajouter la sortie de MON ordinateur ?

Voici ce que donne le secret d'état : xrandr

~$ xrandr
Screen 0: minimum 8 x 8, current 1152 x 864, maximum 4096 x 4096
VGA-0 connected primary 1152x864+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
   1024x768      60.00 +
   1360x768      59.96    59.80  
   1152x864      60.00*
   800x600       72.19    60.32    56.25  
   680x384       59.96    59.80  
   640x480       59.94  
   576x432       60.06  
   512x384       60.00  
   400x300       72.19    60.32    56.34  
   320x240       60.05  
 



quelqu'un peux me donner le code exact pour ajouter la résolution 1280x1024, SVP

#21 Re : Matériel » [Résolu] resolution non disponible » 31-07-2021 16:45:56

rainer
bonjour,
glxinfo donne :

glxinfo -B
name of display: :0
display: :0  screen: 0
direct rendering: Yes
OpenGL vendor string: NVIDIA Corporation
OpenGL renderer string: GeForce 7025 / nForce 630a/integrated/SSE2/3DNOW!
OpenGL version string: 2.1.2 NVIDIA 304.137
OpenGL shading language version string: 1.20 NVIDIA via Cg compiler

OpenGL ES profile version string: OpenGL ES 2.0 NVIDIA 304.137 304.137
OpenGL ES profile shading language version string: OpenGL ES GLSL ES 1.00

 


bloc à supprimer si la commande n’affiche rien



journalctrl donne :

# journalctl -r -p err
-- Logs begin at Sat 2021-07-31 17:18:22 CEST, end at Sat 2021-07-31 17:31:13 CE
juil. 31 17:18:39 Debian9 colord-sane[500]: io/hpmud/pp.c 627: unable to read de


juil. 31 17:18:29 Debian9 avahi-daemon[402]: chroot.c: open() failed: No such fi
lines 1-3/3 (END)...skipping...
-- Logs begin at Sat 2021-07-31 17:18:22 CEST, end at Sat 2021-07-31 17:31:13 CEST. --
juil. 31 17:18:39 Debian9 colord-sane[500]: io/hpmud/pp.c 627: unable to read device-id ret=-1
juil. 31 17:18:29 Debian9 avahi-daemon[402]: chroot.c: open() failed: No such file or directory
~
 


bloc à supprimer si la commande n’affiche rien


cat /var/log/Xorg.0.log

41.234] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    41.234] (**) NVIDIA(0):     device CRT-0 (Using EDID frequencies has been enabled on
[    41.234] (**) NVIDIA(0):     all display devices.)
[    41.348] (II) NVIDIA(0): Setting mode "VGA-0: 1152x864 @1152x864 +0+0"
[    45.610] (WW) NVIDIA(GPU-0): The EDID read for display device CRT-0 is invalid:
[    45.610] (WW) NVIDIA(GPU-0):     unrecognized EDID Header.

 


bloc à supprimer si la commande n’affiche rien



avant et après il n'y a que des chiffres et lettres mais pas de résolution d'affichage ,
j'avoue là c'est un peu trop compliqué pour moi. donc la dernière résolution que j'ai pu mettre est 1152x864

#22 Re : Matériel » [Résolu] resolution non disponible » 30-07-2021 13:07:23

rainer
bonjour,
voici les réponses de la console :

~$ cvt 1280 1024
# 1280x1024 59.89 Hz (CVT 1.31M4) hsync: 63.67 kHz; pclk: 109.00 MHz
Modeline "1280x1024_60.00"  109.00  1280 1368 1496 1712  1024 1027 1034 1063 -hsync +vsync

xrandr --newmode "1280x1024_60.00"  109.00  1280 1368 1496 1712  1024 1027 1034 1063 -hsync +vsync

$ xrandr --addmode eDP-1 --mode "1280x1024_60"
xrandr: unrecognized option '1280x1024_60'



la resolution 1280x1024 n'est pas listé dans xrandr mais est disponible pour mageia7 avec le driver 'nouveau' et fonctionne bien. Mais je n'ai pas l'accélération 3D avec le driver "nouveau"
et avant ça mageia 5 avec le driver nvidia 304.134 ça marchait directement sans avoir à ajouter la ligne 1280x1024 donc -> la carte graphique et l'écran supportent bien cette résolution.

#23 Matériel » [Résolu] resolution non disponible » 30-07-2021 11:04:49

rainer
Réponses : 51
Bonjour,
J'ai choisi debian 9 pour pouvoir installer encore le driver propriétaire nvidia 304.137. Ça marché ! Super.... mais, le résolution 1280x1024 n'est pas disponible dans nvidia-settings. J'ai 1024x768 , c'est un peu faible. Comment ajouter une résolution, alors le fichier xorg.conf est introuvable ?

merci pour une idée
Rainer

Pied de page des forums

Propulsé par FluxBB