Messages de Tuxargon

Tuxargon · Autres

Roxterm ?!

Tuxargon · Matériel

@palmito : voici ce que j'ai rajouté sur mon fstab :

/dev/sdb  /mnt/disk vfat  user,noauto 0 0

@Melodie : Il n y a pas de groupe storage ni le fichier dont tu parle chez moi

De mon coté c'est bon, le sujet est résolu, merci

Tuxargon · Matériel

Oui

Tuxargon · Matériel

Bonjour tout le monde

Après avoir résolu un problème assez similaire la semaine dernière (xsane), je me retrouve avec un thunar qui m'affiche ceci lors du montage de la clé usb : org.freedesktop.hal.storage.mount-removable no <-- (action, result).

Or, je peux monter en root et lire/ecrire sur la clé

Voilà le résultat de la commande groups :

tuxargon dialout cdrom floppy sudo audio video plugdev scanner saned

J'espère que ces informations ont été assez suffisantes pour m'aider à résoudre le problème, merci d'avance

Cordialement.

Tuxargon · Matériel

Mon problème est résolu en suivant les conseilles de Melodie mais avec un 777 à la place de 666, merci

Tuxargon · Matériel

Salut tout le monde

Tous est dans le titre, même après ajouter mon utilisateur au groupe scanner xsane ne détecte pas mon scanneur HP sauf si je le lance en root

Un idée pour contourner ce problème ?

Merci d'avance

Cordialement.

Tuxargon · Matériel

J'ai essayer avec 3 versions de noyaux mais c'est la même chose

Merci quand même

Tuxargon · Multimédia

Bonjour tout le monde,

Etant utilisateur de recordmydesktop et de son interface GTK, je souhaiterai faire une vidéo où je serai obliger de faire zoomer quelques parties de l'écran mais je me suis rendu compte que ça marcher que avec Compiz (avec un de ses plugins).

Or je n'utilise pas Compiz (je l'ai laissé au profit de openbox) j'ai pas trouvé une astuce ou un logiciel qui puisse satisfaire mon envie, alors je me retourne vers vous.

En résumant, comment faire un screencast avec zoom sans Compiz ?

Merci d'avance.

Cordialement.

Tuxargon · Matériel

Bonjour,

Ce problème dure depuis mon installation, et je n'ai aucun périphérique raccordé à part la souris (sauf quand j'ai besoin d'une clé usb ou de mon baladeur mp3)

J'ai vu un problème similaire au mien, mais la manipulation proposée ne marche pas : http://www.spinics.net/lists/usb/msg02644.html

Tuxargon · Matériel

lsusb me revois ceci :

Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Bus 002 Device 003: ID 046d:c016 Logitech, Inc. M-UV69a/HP M-UV96 Optical Wheel Mouse

Bus 002 Device 002: ID 058f:6254 Alcor Micro Corp. 

Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

lsmod | grep usb me revois ceci :

usbhid                 29132  5 hid_gaff,hid_pl,hid_zpff,hid_tmff,hid_logitech

hid                    34260  21 hid_gaff,hid_pl,hid_cypress,hid_zpff,hid_gyration,hid_sony,hid_ntrig,hid_samsung,hid_microsoft,hid_tmff,hid_monterey,hid_ezkey,hid_apple,hid_a4tech,hid_logitech,hid_cherry,hid_sunplus,hid_petalynx,hid_belkin,hid_chicony,usbhid

usbcore               124912  5 hid_sony,usbhid,uhci_hcd,ehci_hcd

Alors ? une solution ?

Tuxargon · Matériel

Bonjour,
Je sais pas si je poste dans la bonne section mais voilà : sur ma Debian sid et j'ai plein de ligne qui s'affichent au moment du boot concernant le hub et usb

Comme je sais que c'est pas assez suffisant et un peu confus, voici les lignes dont je vous parle :

[ 4.688079] usb 1-2: new high speed USB device using ehci_hcd and address 8
[ 4.820613] usb 1-2: New USB device found, idVendor=058f, idProduct=6254
[ 4.820619] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 4.820622] usb 1-2: Product: USB2.0Hub
[ 4.820773] usb 1-2: configuration #1 chosen from 1 choice
[ 4.820891] hub 1-2:1.0: USB hub found
[ 4.820996] hub 1-2:1.0: 4 ports detected
[ 4.825148] usb 1-2: USB disconnect, address 8
[ 5.068059] usb 1-2: new high speed USB device using ehci_hcd and address 9
[ 5.200637] usb 1-2: New USB device found, idVendor=058f, idProduct=6254
[ 5.200643] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 5.200646] usb 1-2: Product: USB2.0Hub
[ 5.200790] usb 1-2: configuration #1 chosen from 1 choice
[ 5.202627] hub 1-2:1.0: USB hub found
[ 5.202761] hub 1-2:1.0: 4 ports detected
[ 5.223413] PM: Starting manual resume from disk
[ 5.304265] hub 1-2:1.0: hub_port_status failed (err = -71)
[ 5.313290] kjournald starting. Commit interval 5 seconds
[ 5.313309] EXT3-fs: mounted filesystem with ordered data mode.
[ 5.355188] usb 1-2: USB disconnect, address 9
[ 5.624065] usb 1-2: new high speed USB device using ehci_hcd and address 10
[ 5.692271] hub 1-0:1.0: unable to enumerate USB device on port 2
[ 5.932067] usb 1-2: new high speed USB device using ehci_hcd and address 11
[ 6.000279] hub 1-0:1.0: unable to enumerate USB device on port 2
[ 6.240061] usb 1-2: new high speed USB device using ehci_hcd and address 12
[ 6.373213] usb 1-2: New USB device found, idVendor=058f, idProduct=6254
[ 6.373219] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 6.373222] usb 1-2: Product: USB2.0Hub
[ 6.373359] usb 1-2: configuration #1 chosen from 1 choice
[ 6.377309] usb 1-2: can't set config #1, error -71
[ 6.377479] usb 1-2: USB disconnect, address 12
[ 6.616060] usb 1-2: new high speed USB device using ehci_hcd and address 13
[ 6.748717] usb 1-2: New USB device found, idVendor=058f, idProduct=6254
[ 6.748722] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 6.748726] usb 1-2: Product: USB2.0Hub
[ 6.748866] usb 1-2: configuration #1 chosen from 1 choice
[ 6.748998] hub 1-2:1.0: USB hub found
[ 6.749088] hub 1-2:1.0: 4 ports detected
[ 6.967982] hub 1-2:1.0: hub_port_status failed (err = -71)
[ 6.972097] hub 1-2:1.0: cannot reset port 4 (err = -71)
[ 6.976216] hub 1-2:1.0: cannot reset port 4 (err = -71)
[ 6.982006] hub 1-2:1.0: cannot reset port 4 (err = -71)
[ 6.986087] hub 1-2:1.0: cannot reset port 4 (err = -71)
[ 6.986139] hub 1-2:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 6.990519] hub 1-2:1.0: cannot disable port 4 (err = -71)
[ 6.994595] hub 1-2:1.0: cannot reset port 4 (err = -71)
[ 6.998694] hub 1-2:1.0: cannot reset port 4 (err = -71)
[ 7.002828] hub 1-2:1.0: cannot reset port 4 (err = -71)
[ 7.006934] hub 1-2:1.0: cannot reset port 4 (err = -71)
[ 7.011055] hub 1-2:1.0: cannot reset port 4 (err = -71)
[ 7.011107] hub 1-2:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 7.015175] hub 1-2:1.0: cannot disable port 4 (err = -71)
[ 7.019307] hub 1-2:1.0: cannot reset port 4 (err = -71)
[ 7.023430] hub 1-2:1.0: cannot reset port 4 (err = -71)
[ 7.027597] hub 1-2:1.0: cannot reset port 4 (err = -71)
[ 7.031685] hub 1-2:1.0: cannot reset port 4 (err = -71)
[ 7.035820] hub 1-2:1.0: cannot reset port 4 (err = -71)
[ 7.035879] hub 1-2:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 7.039938] hub 1-2:1.0: cannot disable port 4 (err = -71)
[ 7.044085] hub 1-2:1.0: cannot reset port 4 (err = -71)
[ 7.048180] hub 1-2:1.0: cannot reset port 4 (err = -71)
[ 7.052290] hub 1-2:1.0: cannot reset port 4 (err = -71)
[ 7.056446] hub 1-2:1.0: cannot reset port 4 (err = -71)
[ 7.060560] hub 1-2:1.0: cannot reset port 4 (err = -71)
[ 7.060620] hub 1-2:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 7.064683] hub 1-2:1.0: cannot disable port 4 (err = -71)
[ 7.064749] hub 1-2:1.0: unable to enumerate USB device on port 4
[ 7.068811] hub 1-2:1.0: cannot disable port 4 (err = -71)
[ 7.068892] usb 1-2: USB disconnect, address 13
[ 7.244295] udev: starting version 140
[ 7.308057] usb 1-2: new high speed USB device using ehci_hcd and address 18
[ 7.440700] usb 1-2: New USB device found, idVendor=058f, idProduct=6254
[ 7.440705] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 7.440709] usb 1-2: Product: USB2.0Hub
[ 7.440842] usb 1-2: configuration #1 chosen from 1 choice
[ 7.440982] hub 1-2:1.0: USB hub found
[ 7.441070] hub 1-2:1.0: 4 ports detected
[ 7.464431] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 7.464444] ACPI: Power Button (FF) [PWRF]
[ 7.464528] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 7.464534] ACPI: Power Button (CM) [PWRB]
[ 7.464609] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 7.464617] ACPI: Sleep Button (CM) [SLPB]
[ 7.480210] parport_pc 00:0a: reported by Plug and Play ACPI
[ 7.480265] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 7.519621] usb 1-2: USB disconnect, address 18
[ 7.603106] gameport: NS558 PnP Gameport is pnp00:0c/gameport0, io 0x201, speed 736kHz
[ 7.808109] usb 1-2: new high speed USB device using ehci_hcd and address 19
[ 7.821317] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 7.952333] usb 1-2: device descriptor read/all, error -71
[ 8.064145] usb 1-2: new high speed USB device using ehci_hcd and address 20
[ 8.132447] hub 1-0:1.0: unable to enumerate USB device on port 2
[ 8.138665] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 8.313109] usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x5511
[ 8.313144] usbcore: registered new interface driver usblp
[ 8.376108] usb 1-2: new high speed USB device using ehci_hcd and address 21
[ 8.420043] NET: Registered protocol family 23
[ 8.904088] usb 1-2: device not accepting address 21, error -71
[ 9.016087] usb 1-2: new high speed USB device using ehci_hcd and address 22
[ 9.084810] hub 1-0:1.0: unable to enumerate USB device on port 2
[ 9.164504] VIA 82xx Audio 0000:00:11.5: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10
[ 9.164512] VIA 82xx Audio 0000:00:11.5: VIA VLink IRQ fixup, from 5 to 10
[ 9.164667] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
[ 9.324058] usb 1-2: new high speed USB device using ehci_hcd and address 23
[ 9.468346] usb 1-2: device descriptor read/all, error -71
[ 9.584041] usb 1-2: new high speed USB device using ehci_hcd and address 24
[ 9.652333] hub 1-0:1.0: unable to enumerate USB device on port 2
[ 9.892069] usb 1-2: new high speed USB device using ehci_hcd and address 25
[ 10.420040] usb 1-2: device not accepting address 25, error -71
[ 10.532057] usb 1-2: new high speed USB device using ehci_hcd and address 26
[ 10.601405] hub 1-0:1.0: unable to enumerate USB device on port 2
[ 10.844057] usb 1-2: new high speed USB device using ehci_hcd and address 27
[ 10.988330] usb 1-2: device descriptor read/all, error -71
[ 11.104082] usb 1-2: new high speed USB device using ehci_hcd and address 28
[ 11.132187] Adding 570296k swap on /dev/hda4. Priority:-1 extents:1 across:570296k
[ 11.173980] hub 1-0:1.0: unable to enumerate USB device on port 2
[ 11.416041] usb 1-2: new high speed USB device using ehci_hcd and address 29
[ 11.613392] EXT3 FS on hda2, internal journal
[ 11.936057] usb 1-2: device not accepting address 29, error -71
[ 12.048289] usb 1-2: new high speed USB device using ehci_hcd and address 30
[ 12.116441] hub 1-0:1.0: unable to enumerate USB device on port 2
[ 12.228857] loop: module loaded
[ 12.356087] usb 1-2: new high speed USB device using ehci_hcd and address 31
[ 12.488596] usb 1-2: New USB device found, idVendor=058f, idProduct=6254
[ 12.488601] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 12.488605] usb 1-2: Product: USB2.0Hub
[ 12.488759] usb 1-2: configuration #1 chosen from 1 choice
[ 12.494055] hub 1-2:1.0: USB hub found
[ 12.494221] hub 1-2:1.0: 4 ports detected
[ 12.518636] usb 1-2: USB disconnect, address 31
[ 12.788060] usb 1-2: new high speed USB device using ehci_hcd and address 32
[ 12.922266] usb 1-2: New USB device found, idVendor=058f, idProduct=6254
[ 12.922272] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 12.922275] usb 1-2: Product: USB2.0Hub
[ 12.922427] usb 1-2: configuration #1 chosen from 1 choice
[ 12.927655] hub 1-2:1.0: USB hub found
[ 12.927764] hub 1-2:1.0: 4 ports detected
[ 13.070041] kjournald starting. Commit interval 5 seconds
[ 13.070175] EXT3 FS on hda3, internal journal
[ 13.070182] EXT3-fs: mounted filesystem with ordered data mode.
[ 13.114016] usb 1-2: USB disconnect, address 32
[ 13.384049] usb 1-2: new high speed USB device using ehci_hcd and address 33
[ 13.516726] usb 1-2: New USB device found, idVendor=058f, idProduct=6254
[ 13.516732] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 13.516735] usb 1-2: Product: USB2.0Hub
[ 13.516881] usb 1-2: configuration #1 chosen from 1 choice
[ 13.522367] hub 1-2:1.0: USB hub found
[ 13.524756] hub 1-2:1.0: 4 ports detected
[ 13.663993] usb 1-2: USB disconnect, address 33
[ 13.796876] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[ 13.940084] usb 1-2: new high speed USB device using ehci_hcd and address 34
[ 14.077667] PPP generic driver version 2.4.2
[ 14.086450] usb 1-2: device descriptor read/all, error -71
[ 14.164399] hub 1-0:1.0: unable to enumerate USB device on port 2
[ 14.166153] NET: Registered protocol family 10
[ 14.166873] lo: Disabled Privacy Extensions
[ 14.262738] NET: Registered protocol family 24
[ 14.404095] usb 1-2: new high speed USB device using ehci_hcd and address 36
[ 14.536670] usb 1-2: New USB device found, idVendor=058f, idProduct=6254
[ 14.536676] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 14.536679] usb 1-2: Product: USB2.0Hub
[ 14.536826] usb 1-2: configuration #1 chosen from 1 choice
[ 14.542067] hub 1-2:1.0: USB hub found
[ 14.542179] hub 1-2:1.0: 4 ports detected
[ 14.584957] usb 1-2: USB disconnect, address 36
[ 14.860094] usb 1-2: new high speed USB device using ehci_hcd and address 37
[ 14.992729] usb 1-2: New USB device found, idVendor=058f, idProduct=6254
[ 14.992734] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 14.992738] usb 1-2: Product: USB2.0Hub
[ 14.992892] usb 1-2: configuration #1 chosen from 1 choice
[ 14.998192] hub 1-2:1.0: USB hub found
[ 14.998354] hub 1-2:1.0: 4 ports detected
[ 15.160070] usb 1-2: USB disconnect, address 37
[ 15.432081] usb 1-2: new high speed USB device using ehci_hcd and address 38
[ 15.568666] usb 1-2: New USB device found, idVendor=058f, idProduct=6254
[ 15.568672] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 15.568676] usb 1-2: Product: USB2.0Hub
[ 15.568826] usb 1-2: configuration #1 chosen from 1 choice
[ 15.593019] hub 1-2:1.0: USB hub found
[ 15.593177] hub 1-2:1.0: 4 ports detected
[ 15.712338] usb 1-2: USB disconnect, address 38
[ 15.989172] usb 1-2: new high speed USB device using ehci_hcd and address 39
[ 16.135581] usb 1-2: device descriptor read/all, error -71
[ 16.252056] usb 1-2: new high speed USB device using ehci_hcd and address 40
[ 16.320327] hub 1-0:1.0: unable to enumerate USB device on port 2
[ 16.560060] usb 1-2: new high speed USB device using ehci_hcd and address 41
[ 17.084154] usb 1-2: device not accepting address 41, error -71
[ 17.210049] usb 1-2: new high speed USB device using ehci_hcd and address 42
[ 17.276396] hub 1-0:1.0: unable to enumerate USB device on port 2
[ 17.520095] usb 1-2: new high speed USB device using ehci_hcd and address 43
[ 17.652679] usb 1-2: New USB device found, idVendor=058f, idProduct=6254
[ 17.652684] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 17.652688] usb 1-2: Product: USB2.0Hub
[ 17.652829] usb 1-2: configuration #1 chosen from 1 choice
[ 17.656595] hub 1-2:1.0: USB hub found
[ 17.659403] hub 1-2:1.0: 4 ports detected
[ 17.760231] usb 1-2: USB disconnect, address 43
[ 17.761984] hub 1-2:1.0: hub_port_status failed (err = -108)
[ 17.762047] hub 1-2:1.0: hub_port_status failed (err = -19)
[ 17.762098] hub 1-2:1.0: hub_port_status failed (err = -19)
[ 17.762150] hub 1-2:1.0: hub_port_status failed (err = -19)
[ 17.762201] hub 1-2:1.0: activate --> -19
[ 18.032066] usb 1-2: new high speed USB device using ehci_hcd and address 44
[ 18.164626] usb 1-2: New USB device found, idVendor=058f, idProduct=6254
[ 18.164632] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 18.164635] usb 1-2: Product: USB2.0Hub
[ 18.164783] usb 1-2: configuration #1 chosen from 1 choice
[ 18.168550] hub 1-2:1.0: USB hub found
[ 18.184634] hub 1-2:1.0: config failed, can't read hub descriptor (err -22)
[ 18.184950] usb 1-2: USB disconnect, address 44
[ 18.428064] usb 1-2: new high speed USB device using ehci_hcd and address 45
[ 18.496371] hub 1-0:1.0: unable to enumerate USB device on port 2
[ 18.744078] usb 1-2: new high speed USB device using ehci_hcd and address 46
[ 18.812280] hub 1-0:1.0: unable to enumerate USB device on port 2
[ 18.823441] lp0: using parport0 (interrupt-driven).
[ 18.835712] ppdev: user-space parallel port driver
[ 19.052051] usb 1-2: new high speed USB device using ehci_hcd and address 47
[ 19.184677] usb 1-2: New USB device found, idVendor=058f, idProduct=6254
[ 19.184683] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 19.184686] usb 1-2: Product: USB2.0Hub
[ 19.184849] usb 1-2: configuration #1 chosen from 1 choice
[ 19.184962] hub 1-2:1.0: USB hub found
[ 19.185045] hub 1-2:1.0: 4 ports detected
[ 19.224056] usb 1-2: USB disconnect, address 47
[ 19.496059] usb 1-2: new high speed USB device using ehci_hcd and address 48
[ 19.564316] hub 1-0:1.0: unable to enumerate USB device on port 2
[ 19.804072] usb 1-2: new high speed USB device using ehci_hcd and address 49
[ 19.937857] usb 1-2: New USB device found, idVendor=058f, idProduct=6254
[ 19.937863] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 19.937867] usb 1-2: Product: USB2.0Hub
[ 19.938027] usb 1-2: configuration #1 chosen from 1 choice
[ 19.943704] hub 1-2:1.0: USB hub found
[ 19.943857] hub 1-2:1.0: 4 ports detected
[ 19.952886] usb 1-2: USB disconnect, address 49
[ 20.196057] usb 1-2: new high speed USB device using ehci_hcd and address 50
[ 20.724041] usb 1-2: device not accepting address 50, error -71
[ 20.836082] usb 1-2: new high speed USB device using ehci_hcd and address 51
[ 20.904299] hub 1-0:1.0: unable to enumerate USB device on port 2
[ 21.144086] usb 1-2: new high speed USB device using ehci_hcd and address 52
[ 21.672051] usb 1-2: device not accepting address 52, error -71
[ 21.784122] usb 1-2: new high speed USB device using ehci_hcd and address 53
[ 21.852341] hub 1-0:1.0: unable to enumerate USB device on port 2
[ 22.092057] usb 1-2: new high speed USB device using ehci_hcd and address 54
[ 22.224869] usb 1-2: New USB device found, idVendor=058f, idProduct=6254
[ 22.224875] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 22.224878] usb 1-2: Product: USB2.0Hub
[ 22.225064] usb 1-2: configuration #1 chosen from 1 choice
[ 22.225155] hub 1-2:1.0: USB hub found
[ 22.225234] hub 1-2:1.0: 4 ports detected
[ 22.264070] usb 1-2: USB disconnect, address 54
[ 22.536057] usb 1-2: new high speed USB device using ehci_hcd and address 55
[ 22.604372] hub 1-0:1.0: unable to enumerate USB device on port 2
[ 22.844046] usb 1-2: new high speed USB device using ehci_hcd and address 56
[ 22.912365] hub 1-0:1.0: unable to enumerate USB device on port 2
[ 23.292044] usb 2-2: new full speed USB device using uhci_hcd and address 3
[ 23.430113] usb 2-2: not running at top speed; connect to a high speed hub
[ 23.445109] usb 2-2: New USB device found, idVendor=058f, idProduct=6254
[ 23.445114] usb 2-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 23.445117] usb 2-2: Product: USB2.0Hub
[ 23.445269] usb 2-2: configuration #1 chosen from 1 choice
[ 23.451281] hub 2-2:1.0: USB hub found
[ 23.458106] hub 2-2:1.0: 4 ports detected
[ 23.769103] usb 2-2.4: new low speed USB device using uhci_hcd and address 4
[ 23.923073] usb 2-2.4: New USB device found, idVendor=046d, idProduct=c016
[ 23.923078] usb 2-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 23.923082] usb 2-2.4: Product: Optical USB Mouse
[ 23.923084] usb 2-2.4: Manufacturer: Logitech
[ 23.923239] usb 2-2.4: configuration #1 chosen from 1 choice

C'est un probleme matériel ou un probleme de soft ? c'est pas dangeureux ?
Je souhaiterai que quelqu'un m'éclairci plus les choses ou me donne une solution pour supprimer ces ligne.

Merci d'avance.
Cordialement

Tuxargon · Matériel

Ok, mais je sais pas pourquoi elle marchait sur Ubuntu

Tuxargon · Installation et migration

Migration effectué avec succés, j'en ai même fait un compte rendu pour ceux qui sont curieux : http://pressenux.tuxfamily.org/mon-reto … ebian.html
Merci

Tuxargon · Installation et migration

Bonjour,
Je souhaiterai installer Debian sur mon deuxieme PC qui est en ce moment sur Ubuntu, mais voulià le problème :
Quand j'arrive au partitionnage je suis un peu perdu : j'ai un /home séparé qui date de mon ancienne distribution (Ubuntu) et je voudrais le garder et l'utiliser comme home pour cette installation de Debian.
Alors ? une idée ou une piste pour m'aider ?
Merci d'avance

Cordialement.

Tuxargon · Matériel

Bonjour les amis,
Pour ce premier post, je vais vous demender de m'aider à résoudre un probleme très enervant : je possède une webcam enet qui n'est pas reconnu par les logiciels de visionnage de webcam comme cheese, mais la commande lsusb me dit ceci à propos de ma webcam :

Bus 001 Device 003: ID 0c45:6128 Microdia PC Camera (SN9C325 + OM6802)

Alors je voudrais savoir si il y avait un moyen pour la faire marcher.
Merci d'avance.
Ciao

Tuxargon · Vos préférences

@MaTTuX_ :
Bonsoir,
Mais c'est beaucoup mieux comme ça

Tuxargon · Vos préférences

Ajouter une section Screenshot

Tuxargon · Vos préférences

MPD + Ario, le duo de choc

Tuxargon · Vos préférences

Deluge-torrent, mais je l'utilise que pour télécharger les .iso des distributions Linux

Tuxargon · Vos préférences

1 an et 3 mois pour moi : 4 mois sur Ubuntu et le reste sur Debian.

Tuxargon · Vos préférences

On dirait que personne n'utilise Openbox, sauf moi

Tuxargon · Vos préférences

Gedit et quand je suis en console j'utilise Nano

Tuxargon · Vos préférences

Apt-get, et je sais pas pourquoi ! Une habitude peut-être

Tuxargon · Vos préférences

Debian Sid et Win (pour mon père

)

Debian-facile

#1 Re : Autres » [Résolu] cherche terminal léger avec gestion des onglets » 16-05-2009 18:15:19

#2 Re : Matériel » [Résolu]Clé usb ne marche qu'en root » 08-05-2009 14:34:02

#3 Re : Matériel » [Résolu]Xsane ne marche que en root » 08-05-2009 07:19:18

#4 Matériel » [Résolu]Clé usb ne marche qu'en root » 07-05-2009 18:45:51

#5 Re : Matériel » [Résolu]Xsane ne marche que en root » 06-05-2009 07:02:02

#6 Matériel » [Résolu]Xsane ne marche que en root » 03-05-2009 12:17:49

#7 Re : Matériel » Probleme usb et hub 1-2 » 15-04-2009 06:24:38

#8 Multimédia » Faire un screencast avec Zoom » 14-04-2009 12:32:25

#9 Re : Matériel » Probleme usb et hub 1-2 » 13-04-2009 06:38:27

#10 Re : Matériel » Probleme usb et hub 1-2 » 12-04-2009 06:22:33

#11 Matériel » Probleme usb et hub 1-2 » 11-04-2009 20:23:00

#12 Re : Matériel » Webcam enet hors service » 06-03-2009 18:41:26

#13 Re : Installation et migration » Installation avec un ancien /home séparé » 06-03-2009 18:39:18

#14 Installation et migration » Installation avec un ancien /home séparé » 03-03-2009 17:44:27

#15 Matériel » Webcam enet hors service » 29-12-2008 14:06:50

#16 Re : Vos préférences » Avez vous une idée pour améliorer Debian-facile » 23-12-2008 18:36:10

#17 Re : Vos préférences » Avez vous une idée pour améliorer Debian-facile » 22-12-2008 20:51:19

#18 Re : Vos préférences » Quel lecteur audio utilisez-vous? » 22-12-2008 20:47:41

#19 Re : Vos préférences » Quel client Torrent utilisez-vous? » 22-12-2008 20:46:03

#20 Re : Vos préférences » Combien de temps sous GNU/Linux » 22-12-2008 20:42:08

#21 Re : Vos préférences » Quel est votre environement graphique ? » 22-12-2008 20:39:49

#22 Re : Vos préférences » Votre éditeur de texte préféré » 22-12-2008 20:36:14

#23 Re : Vos préférences » Qu' utilisez vous comme gestionnaire de paquets » 22-12-2008 20:34:20

#24 Re : Vos préférences » Avez vous un multiboot, si oui quelles sont les distributions » 22-12-2008 20:29:52

Pied de page des forums