sa m'affiche un sacré paquet de ligne en fait j'vais oublier de mettre sudo devant par manque d'habitude
root@debian:/home/ju# smartctl --smart=on --offlineauto=on --saveauto=on /dev/sda
bash: smartctl : commande introuvable
root@debian:/home/ju# sudo smartctl --smart=on --offlineauto=on --saveauto=on /dev/sda
smartctl 6.6 2017-11-05 r4594 [x86_64-linux-5.4.0-0.bpo.4-lzk-rt-amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
SMART Attribute Autosave Enabled.
SMART Automatic Timers not supported
SMART Automatic Offline Testing Enabled every four hours.
root@debian:/home/ju# sudo smartctl --smart=on --offlineauto=on --saveauto=on /dev/sdb
smartctl 6.6 2017-11-05 r4594 [x86_64-linux-5.4.0-0.bpo.4-lzk-rt-amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
SMART Attribute Autosave Enabled.
SMART Automatic Timers not supported
SMART Automatic Offline Testing Enabled every four hours.
root@debian:/home/ju# sudo smartctl -s on -a /dev/sdb
smartctl 6.6 2017-11-05 r4594 [x86_64-linux-5.4.0-0.bpo.4-lzk-rt-amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 2.5 5400
Device Model: ST1000LM048-2E7172
Serial Number: ZDE1P6LD
LU WWN Device Id: 5 000c50 0a37647ad
Firmware Version: SDM1
User Capacity: 1000204886016 bytes [1,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-3 T13/2161-D revision 3b
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sat May 9 20:01:26 2020 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x71) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 167) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x3035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 078 043 006 Pre-fail Always - 60788666
3 Spin_Up_Time 0x0003 099 099 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 098 098 020 Old_age Always - 2210
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 075 060 045 Pre-fail Always - 34421140
9 Power_On_Hours 0x0032 093 093 000 Old_age Always - 6284 (75 169 0)
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 099 099 020 Old_age Always - 1808
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 5203
188 Command_Timeout 0x0032 100 094 000 Old_age Always - 137441837108
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 074 058 040 Old_age Always - 26 (Min/Max 21/29)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 5
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 227
193 Load_Cycle_Count 0x0032 086 086 000 Old_age Always - 29962
194 Temperature_Celsius 0x0022 026 042 000 Old_age Always - 26 (0 10 0 0 0)
197 Current_Pending_Sector 0x0012 069 069 000 Old_age Always - 2592
198 Offline_Uncorrectable 0x0010 069 069 000 Old_age Offline - 2592
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 3781 (167 137 0)
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 9034996253
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 14974821570
254 Free_Fall_Sensor 0x0032 100 100 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 5185 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 5185 occurred at disk power-on lifetime: 5982 hours (249 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 10 ff ff ff ef 00 00:00:35.194 READ DMA EXT
25 00 f0 ff ff ff ef 00 00:00:31.468 READ DMA EXT
25 00 10 ff ff ff ef 00 00:00:31.466 READ DMA EXT
25 00 f0 ff ff ff ef 00 00:00:31.463 READ DMA EXT
25 00 10 ff ff ff ef 00 00:00:31.463 READ DMA EXT
Error 5184 occurred at disk power-on lifetime: 5982 hours (249 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 f0 ff ff ff ef 00 00:00:31.468 READ DMA EXT
25 00 10 ff ff ff ef 00 00:00:31.466 READ DMA EXT
25 00 f0 ff ff ff ef 00 00:00:31.463 READ DMA EXT
25 00 10 ff ff ff ef 00 00:00:31.463 READ DMA EXT
25 00 f0 ff ff ff ef 00 00:00:31.460 READ DMA EXT
Error 5183 occurred at disk power-on lifetime: 5982 hours (249 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 10 ff ff ff ef 00 00:00:25.639 READ DMA EXT
25 00 f0 ff ff ff ef 00 00:00:21.930 READ DMA EXT
25 00 10 ff ff ff ef 00 00:00:21.927 READ DMA EXT
25 00 f0 ff ff ff ef 00 00:00:21.924 READ DMA EXT
25 00 10 ff ff ff ef 00 00:00:21.924 READ DMA EXT
Error 5182 occurred at disk power-on lifetime: 5982 hours (249 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 f0 ff ff ff ef 00 00:00:21.930 READ DMA EXT
25 00 10 ff ff ff ef 00 00:00:21.927 READ DMA EXT
25 00 f0 ff ff ff ef 00 00:00:21.924 READ DMA EXT
25 00 10 ff ff ff ef 00 00:00:21.924 READ DMA EXT
25 00 f0 ff ff ff ef 00 00:00:21.920 READ DMA EXT
Error 5181 occurred at disk power-on lifetime: 5982 hours (249 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 10 ff ff ff ef 00 00:00:15.292 READ DMA EXT
25 00 f0 ff ff ff ef 00 00:00:11.570 READ DMA EXT
25 00 10 ff ff ff ef 00 00:00:11.567 READ DMA EXT
25 00 f0 ff ff ff ef 00 00:00:11.564 READ DMA EXT
25 00 10 ff ff ff ef 00 00:00:11.564 READ DMA EXT
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
root@debian:/home/ju#