logo Debian Debian Debian-France Debian-Facile Debian-fr.org Forum-Debian.fr Debian ? Communautés logo inclusivité

Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).


L'icône rouge permet de télécharger chaque page du wiki visitée au format PDF et la grise au format ODT → ODT PDF Export

Différences

Ci-dessous, les différences entre deux révisions de la page.

Lien vers cette vue comparative

Les deux révisions précédentes Révision précédente
Prochaine révision
Révision précédente
Prochaine révision Les deux révisions suivantes
utilisateurs:slyfox:config:configuration-systeme [13/05/2018 20:21]
Slyfox [Dépôt]
utilisateurs:slyfox:config:configuration-systeme [20/06/2021 23:06]
Slyfox [HP ENVY 32]
Ligne 3: Ligne 3:
 ===== Graver clé USB live ===== ===== Graver clé USB live =====
  
-<code root>fdisk -l</​code>​+<code root>lsblk --fs</​code>​
  
 <code root>dd if=image.iso of=/dev/sdx bs=4M && sync</​code>​ <code root>dd if=image.iso of=/dev/sdx bs=4M && sync</​code>​
Ligne 10: Ligne 10:
  
  ​{{/​file-Rfd34724d994d65fb28eaa9bbeeda2c22.png}}  ​{{/​file-Rfd34724d994d65fb28eaa9bbeeda2c22.png}}
- 
-<code root>​fdisk -l</​code>​ 
  
 <code root>​umount /​dev/​sdx</​code>​ <code root>​umount /​dev/​sdx</​code>​
  
 <code root>dd if=/​dev/​zero of=/dev/sdx bs=2048 count=32 </​code>​ <code root>dd if=/​dev/​zero of=/dev/sdx bs=2048 count=32 </​code>​
-===== Wi-fi ===== 
- 
-==== Acer Predator G6-710 ==== 
- 
-<code root> 
-apt-get install firmware-atheros 
-modprobe -r ath10k_pci 
-wget https://​github.com/​FireWalkerX/​ath10k-firmware/​blob/​master/​QCA6174/​hw3.0/​board-2.bin 
-cp board-2.bin /​lib/​firmware/​ath10k/​QCA6174/​hw3.0/​board.bin ​ 
-</​code>​ 
- 
-Lien du fichier board.bin: [[https://​github.com/​FireWalkerX/​ath10k-firmware/​blob/​master/​QCA6174/​hw3.0/​board-2.bin]] 
- 
-==== Packard Bell ==== 
- 
-<code root> 
-apt-get install wireless-tools && apt-get update && apt-get install firmware-iwlwifi && modprobe -r iwlwifi ; modprobe iwlwifi</​code>​ 
  
 ===== Dépôt ===== ===== Dépôt =====
  
-<code root>nano /​etc/​apt/​sources.list</​code>​+<code root>pluma /​etc/​apt/​sources.list</​code>​
  
-<file apt_sources /​etc/​apt/​sources.list.d/​deb_debian-stable_non-libre.list>+<file apt_sources /​etc/​apt/​sources.list.d>​
  
-# Debian stabledépôt principal + paquets non libres +# Debian stable dépôt principal + paquets non libres 
-    deb http://​deb.debian.org/​debian/​ stable main contrib non-free+deb http://​deb.debian.org/​debian/​ stable main contrib non-free
     ​     ​
-# Debian stablemises à jour de sécurité + paquets non libres +# Debian stable mises à jour de sécurité + paquets non libres 
-    deb http://​security.debian.org/​ stable/​updates main contrib non-free+deb http://​security.debian.org/​ stable/​updates main contrib non-free
     ​     ​
-# Debian ​Stretch, ​mises à jour "​volatiles"​ + paquets non libres +# Debian ​stable ​mises à jour "​volatiles"​ + paquets non libres 
-    deb http://​deb.debian.org/​debian/​ stable-updates main contrib non-free +deb http://​deb.debian.org/​debian/​ stable-updates main contrib non-free
-     +
-# Debian Stretch, dépôt de rétroportages ("​backports"​) +
-    deb http://​deb.debian.org/​debian/​ stretch-backports main contrib non-free +
-     +
- # Debian Multimedia +
-  deb http://​www.deb-multimedia.org stretch main non-free +
-   +
-</​file>​+
  
-<code root> +# Debian stable dépôt de rétroportages ("​backports"​) 
-apt-get update +deb http://​deb.debian.org/​debian/​ buster-backports main contrib non-free
-apt-get install ​deb-multimedia-keyring +
-apt-get update +
-</​code>​+
  
 +# stable deb-multimedia
 +deb http://​www.deb-multimedia.org stable main non-free
 +</​file>​
  
 +<file apt_sources /​etc/​apt/​sources.list>​
 +# sid
 +deb http://​deb.debian.org/​debian/​ sid main contrib non-free
  
-===== Pilote graphique Nvidia GTX 970 (Predator) ​Stretch =====+# sid deb-multimedia 
 +deb http://​www.deb-multimedia.org sid main non-free 
 +</​file>​
  
-<code root>apt-get install linux-headers-$(uname -r) +<code root>pluma /etc/apt/​preferences.d/​50multimedia</​code>​
-apt-get install -t stretch-backports nvidia-settings +
-apt-get install nvidia-persistenced +
-apt-get install -t stretch-backports nvidia-driver +
-reboot</​code>​+
  
-Lien 1[[https://​wiki.debian.org/​fr/​NvidiaGraphicsDrivers|debian.org NvidiaGraphicsDrivers]]\\ +<​file>​Package
-Lien 2: [[https://​debian-facile.org/​viewtopic.php?​pid=186166#​p186166|DF poste 23]]+Pinrelease o=Unofficial Multimedia Packages,​a=stable 
 +Pin-Priority100</file>
  
 +<code root>​apt-get update -o Acquire::​AllowInsecureRepositories=true
 +apt-get install deb-multimedia-keyring
 +apt update
 +apt full-upgrade</​code>​
  
 +[[https://​debian-facile.org/​doc:​systeme:​apt:​sources.list:​depots-tiers]]\\
 +[[https://​www.linuxtricks.fr/​wiki/​debian-installer-ou-migrer-vers-debian-sid|Installer ou Migrer vers Debian sid]]
  
  
 +===== Logiciels préférés =====
  
 +<code root>​apt-get update
 +apt install mate-desktop-environment-extras network-manager hardinfo avidemux thunderbird thunderbird-l10n-fr ffmpeg mpv hardinfo audacious audacity dvdbackup easytag geany geany-plugin* vobcopy ​ yad youtube-dl zenity mplayer picard quodlibet spek gparted handbrake kid3-cli lsdvd mencoder mgba-common mgba-qt mgba-sdl</​code>​
  
-===== Su / sudo =====+===== Paquets secondaire (à tester) ​=====
  
-<code root> +<code root>apt update 
-adduser slyfox sudo</​code>​+apt install ​ build-essential cifs-utils dconf-editor fakeroot fdkaac flac gawk gconf-editor genisoimage git gstreamer1.0-plugins-bad gstreamer1.0-plugins-base intltool libdca0 libdvdcss2 libdvdnav4 libdvdread8 libgpod-dev libgtk2.0-dev libimobiledevice-dev libimobiledevice-utils mtp-tools pkg-config python3-tk qpdfview samba  smbclient vorbis-tools xz-utils checkinstall firmware-atheros firmware-iwlwifi unrar firmware-b43-installer caja-open-terminal ​ gnome-calculator ​ minidlna mkvtoolnix mkvtoolnix-gui firmware-brcm80211 firmware-linux firmware-linux-free firmware-linux-nonfree amd64-microcode intel-microcode nvidia-detect nvidia-driver pulseaudio pavucontrol firmware-intel-sound firmware-realtek build-essential firmware-b43-installer 
 +apt upgrade</​code>​
  
 +===== HP ENVY 32 ===== 
  
 +<code root>apt update
 +apt install firmware-realtek nvidia-driver alsa-tools</​code>​
  
-===== Paquets préférés =====+==== Audio ====
  
-<code root>apt-get update +<code root>echo "​options snd_hda_intel model=alc274-dell-aio 
-apt-get install mate-desktop-environment-extras firmware-iwlwifi build-essential intltool xz-utils fakeroot checkinstall pkg-config libgtk2.0-dev git-core gconf-editor audacity dconf-editor zenity lsdvd ffmpeg mplayer mencoder dvdbackup genisoimage mkvtoolnix gawk libdca0 libdvdcss2 libdvdnav4 libdvdread4 minidlna caja-open-terminal mkvtoolnix-gui mkvtoolnix avidemux vobcopy youtube-dl pyrenamer zenity gparted shotwell faenza-icon-theme unrar samba smbclient cifs-utils mpv python3-tk gnome-calculator shutter fdkaac audacious qpdfview easytag gstreamer1.0-plugins-base gstreamer1.0-plugins-bad libimobiledevice-dev libimobiledevice-utils libgpod-dev yad mgba-common mgba-sdl mgba-qt quodlibet geany geany-plugin* thunderbird thunderbird-l10n-fr +alias snd-card-0 snd-hda-intel 
-apt-get upgrade</​code>​+alias sound-slot-0 snd-hda-intel 
 +alias sound-slot-0 snd-card-
 +alias sound-service-0-0 snd-mixer-oss 
 +alias sound-service-0-1 snd-seq-oss 
 +alias sound-service-0-3 snd-pcm-oss 
 +alias sound-service-0-8 snd-seq-oss 
 +alias sound-service-0-12 snd-pcm-oss"​ > /​etc/​modprobe.d/​hda.conf</​code>​
  
-===== Steam ===== 
  
-<code root>​dpkg --add-architecture i386 
-apt-get update 
-apt-get upgrade 
-apt-get install -t stretch-backports libgl1-nvidia-glx:​i386 
-apt-get update 
-apt-get install -t stretch-backports libxtst6:​i386 libxrandr2:​i386 libgl1-mesa-glx:​i386 libglib2.0-0:​i386 libgtk2.0-0:​i386 libpulse0:​i386 libgdk-pixbuf2.0-0:​i386 libgl1-nvidia-glx:​i386 
-apt-get install steam</​code>​ 
  
-Lien: [[https://debian-facile.org/doc:jeux:​steam]]+<code root>​echo "/usr/bin/hda-verb /​dev/​snd/​hwC0D0 0x01 SET_GPIO_MASK 0x0 
 +/​usr/​bin/​hda-verb /​dev/​snd/​hwC0D0 0x01 SET_GPIO_DIRECTION 0x0 
 +/​usr/​bin/​hda-verb /​dev/​snd/​hwC0D0 0x01 SET_GPIO_DATA 0x0 
 +sleep 3 
 +/​usr/​bin/​hda-verb /​dev/​snd/​hwC0D0 0x01 SET_GPIO_MASK 0x04 
 +/​usr/​bin/​hda-verb /​dev/​snd/​hwC0D0 0x01 SET_GPIO_DIRECTION 0x04 
 +/​usr/​bin/​hda-verb /​dev/​snd/​hwC0D0 0x01 SET_GPIO_DATA 0x04" > /​opt/​start_hda.txt</code> 
 +<code root>​chmod +x /​opt/​start_hda.txt</​code>​ 
 +<code root>​echo "​slyfox ​   ALL=(ALL:ALL) ALL" >> /​etc/​sudoers</​code>​
  
-----+Création d'un fichier muet:
  
-Si problème, essayer cette commande qui indique les paquets manquants et à installer:+<code root>​ffmpeg -f lavfi -i anullsrc -t 10 /​opt/​silence.mp3</​code>​
  
-<code user>​STEAM_RUNTIME=0 steam</​code>​ 
  
-<note important>​Attention! Il faut installer les paquets manquants en **32 bits (i386).**</​note>​ 
  
-Si cet avertissement:+__Ligne de commande pour raccourcis ​:__
  
-<​code>​Could not load module '​vgui2_s.so'​.+<​code ​user>Type: Application 
 +Nom: Start_audio 
 +Commande: mpg123 --loop 10000 /​opt/​silence.mp3"</​code>​
  
-For more information visit https://support.steampowered.com/​kb_article.php?​ref=9205-OZVN-0660</​code>​+<code user>​TypeApplication 
 +Nom: Start_hda 
 +Commande:​sudo "/opt/start_hda.txt"</​code>​
  
-Avant d'​aller plus loin lancer Steam (normalement) via l’onglet "​Jeu"​ ou \\ +==== Nvidia GPU par défaut ====
-voir ce lien: [[https://​support.steampowered.com/​kb_article.php?​ref=9205-OZVN-0660]]+
  
-<​code>​ 
-cd /​home/​slyfox/​.steam/​bin32 
-LD_LIBRARY_PATH=. ldd vgui2_s.so 
-</​code>​ 
  
-Liens: \\ +<note important>​Vérifier que le secureboot est désactiver dans le BIOS !</note>
-[[http://​store.steampowered.com/​about/​]] \\ +
-[[https://​www.debian-fr.org/​t/​steam-sous-debian-wheezy-sid/​56701/​2]] \\ +
-[[https://​forums.archlinux.fr/​viewtopic.php?​t=18139]]+
  
 +<code root>​apt-get install gdm3</​code>​
  
 +Choisir gdm3.
  
 +<code root>​pluma /​etc/​X11/​xorg.conf.d/​20-nvidia.conf</​code>​
  
 +<code user>​Section "​Module"​
 +    Load "​modesetting"​
 +EndSection
  
 +Section "​Device"​
 +    Identifier "​nvidia"​
 +    Driver "​nvidia"​
 +    BusID "​PCI:​01:​00:​0"​
 +    Option "​AllowEmptyInitialConfiguration"​
 +EndSection</​code>​
  
 +<code root>​pluma /​usr/​share/​gdm/​greeter/​autostart/​optimus.desktop</​code>​
  
-===== MATE ajouter ou enlever des icônes système ====+<code user>​[Desktop Entry] 
 +Type=Application 
 +Name=Optimus 
 +Exec=sh -c "​xrandr --setprovideroutputsource modesetting NVIDIA-0; xrandr --auto"​ 
 +NoDisplay=true 
 +X-GNOME-Autostart-Phase=DisplayServer</​code>​
  
-<​code ​userdconf-editor</​code>​+<​code ​root>pluma /​etc/​xdg/​autostart/​optimus.desktop</​code>​
  
-Puis suivez ce chemin : org/mate/​caja/​desktop+<code user>​[Desktop Entry] 
 +Type=Application 
 +Name=Optimus 
 +Exec=sh -c "​xrandr --setprovideroutputsource modesetting NVIDIA-0; xrandr --auto"​ 
 +NoDisplay=true 
 +X-GNOME-Autostart-Phase=DisplayServer<​/code>
  
 +<code user>​systemctl restart gdm3.service</​code>​
  
 +[[https://​lecrabeinfo.net/​installer-pilote-proprietaire-nvidia-sur-debian-linux.html]]
  
  
 +===== Imac ====
  
 +<code root>apt update
 +apt install firmware-brcm80211</​code>​
  
 +[[https://​debian-facile.org/​doc:​materiel:​wifi:​detecter]] \\
 +[[https://​wiki.debian.org/​Firmware]] \\
 +[[https://​wiki.debian.org/​Firmware/​List]] \\
  
 +===== Liste pilote à installer =====
  
 +<code root>​dmesg | grep firmware</​code>​
 +https://​debian-facile.org/​doc:​materiel:​wifi:​detecter#​etape-4activer-l-interface-reseau
  
 +===== Information système =====
  
 +<code user>​hardinfo &</​code>​
 +[[https://​lecrabeinfo.net/​linux-identifier-carte-graphique-pilote-pc.html]]
  
 +===== Pyrenamer =====
  
 +Télécharger les dernières versions des paquets disponible :
  
 +<code user>cd /​home/​slyfox
 +wget http://​ftp.ch.debian.org/​debian/​pool/​main/​p/​pyrenamer/​pyrenamer_0.6.0-1.2_all.deb
 +wget http://​ftp.ch.debian.org/​debian/​pool/​main/​g/​gnome-python/​python-gconf_2.28.1+dfsg-1.2_amd64.deb</​code>​
  
 +<code root>apt install /​home/​slyfox/​python-gconf_2.28.1+dfsg-1.2_amd64.deb
 +apt install /​home/​slyfox/​pyrenamer_0.6.0-1.2_all.deb</​code>​
  
  
Ligne 182: Ligne 214:
 greeter-hide-users=true greeter-hide-users=true
 session-wrapper=/​etc/​X11/​Xsession session-wrapper=/​etc/​X11/​Xsession
-autologin-user=slyfox+autologin-user=slyfox</​file>​
  
-</​file>​+===== Configuration bureau par défaut ===== 
 + 
 +<code user>​dconf reset -f /</​code>​ 
 + 
 +===== Sudo ===== 
 +<code root>su - 
 +adduser slyfox sudo</​code>​ 
 + 
 +===== Renommer Desktop en Bureau ===== 
 +<file config ~/​.config/​user-dirs.dirs>​ 
 + 
 +# This file is written by xdg-user-dirs-update 
 +# If you want to change or add directories,​ just edit the line you'​re 
 +# interested in. All local changes will be retained on the next run. 
 +# Format is XDG_xxx_DIR="​$HOME/​yyy",​ where yyy is a shell-escaped 
 +# homedir-relative path, or XDG_xxx_DIR="/​yyy",​ where /yyy is an 
 +# absolute path. No other format is supported. 
 +#  
 +XDG_DESKTOP_DIR="​$HOME/​OneDrive/​Bureau"​ 
 +XDG_DOWNLOAD_DIR="​$HOME/​OneDrive/​Downloads"​ 
 +XDG_TEMPLATES_DIR="​$HOME/​Templates"​ 
 +XDG_PUBLICSHARE_DIR="​$HOME/​Public"​ 
 +XDG_DOCUMENTS_DIR="​$HOME/​OneDrive/​Documents"​ 
 +#​XDG_MUSIC_DIR="​$HOME/​Music"​ 
 +#​XDG_PICTURES_DIR="​$HOME/​Pictures"​ 
 +#​XDG_VIDEOS_DIR="​$HOME/​Videos"​</​file>​
  
 ===== Autocomplétion ===== ===== Autocomplétion =====
  
-<code root>apt-get install bash-completion+<code root>apt install bash-completion
 pluma /​etc/​bash.bashrc</​code>​ pluma /​etc/​bash.bashrc</​code>​
  
Ligne 204: Ligne 261:
 fi</​code>​ fi</​code>​
  
 +===== Steam =====
  
-===== Visualiser disques Netgear =====+<note important>​[[https://​wiki.debian.org/​fr/​Steam#​Syst.2BAOg-mes_64_bits_.28amd64.29]]</​note>​
  
-<note warning>​**Ne pas oublier de remplacer les xxx**</​note>​+Ajouter si nécessaire ce dépôt:
  
-<​code ​root>apt-get update && apt-get install samba smbclient cifs-utils</​code>​+<​code>​deb http://​deb.debian.org/​debian/​ buster main contrib non-free</​code>​
  
-==== Monter disques Netgear graphique ====+Activer Multi-Arch et mettre à jour la liste des paquets disponibles.
  
-Commande ouverture Netgear via caja (Mate).+<code root>​dpkg --add-architecture i386 
 +apt update</​code>​
  
-<code user>​caja smb://​192.168.0.xxx</​code>​+Installez le paquet steam:
  
-Option créer un lanceur...+<code root>apt install steam</​code>​
  
-Via terminal+Installez les pilotes recommandés et les bibliothèques Vulkan 32 bits:
  
-<code user>smbclient //192.168.0.xxx/​netgear-disque-interne</code>+<note warning>Lorsque vous installez des bibliothèques 32 bits, assurez-vous qu'​elles ne rentrent pas en conflit avec leur variante 64 bits en surveillant les **suppressions suggérées par Apt** lors de ces opérations.</note>
  
-==== Fichier ​/ect/fstab ====+Liens: \\ 
 +[[https://wiki.debian.org/​fr/​Steam]] \\
  
-(Installation HDD interne Predator)+Si erreur "​libGL.so.1"​
  
-<code root>pluma /etc/fstab</​code>​ +<code root>apt install libgl1-nvidia-glvnd-glx:​i386</​code>​
-<​code>#​ +
-# Use '​blkid'​ to print the universally unique identifier for a +
-# device; this may be used with UUID= as a more robust way to name devices +
-# that works even if disks are added and removed. See fstab(5). +
-+
-# <file system> <mount point> ​  <​type> ​ <​options> ​      <​dump> ​ <​pass>​ +
-# / was on /dev/sda5 during installation +
-UUID=18a3eaf3-95f4-4eb4-8e8e-da581d81fdc9 /               ​ext4 ​   errors=remount-ro 0       1 +
-# /boot/efi was on /dev/sda1 during installation +
-UUID=8606-D934 ​ /​boot/​efi ​      ​vfat ​   umask=0077 ​     0       1 +
-# /home was on /dev/sda6 during installation +
-UUID=d79875ce-9132-4ade-ad19-b9b5573e03d7 /home           ​ext4 ​   defaults ​       0       2 +
-# swap was on /dev/sda7 during installation +
-UUID=39d0e0ab-8071-4590-9596-e712b5f5c8ba none            swap    sw              0       0 +
-/​dev/​sr0 ​       /​media/​cdrom0 ​  ​udf,​iso9660 user,​noauto ​    ​0 ​      0 +
-/​dev/​disk/​by-id/​wwn-0x50014ee261f11217 /​mnt/​wwn-0x50014ee261f11217 auto nosuid,​nodev,​nofail,​noauto,​x-gvfs-show 0 0+
  
-# HDD interne 
-#/dev/sdc2 /​media/​slyfox/​HDD\040SAUVEGARDE ntfs-3g auto,​users,​rw,​nls=utf8,​uid=1000 0 0</​code>​ 
  
-Si problème aller sur Windows est désactiver le mode hibernation de Windows:+===== Monter automatiquement disque externe =====
  
-<​code>​powercfg ​-h off</​code>​ +Identifier numéro UUID 
- +<​code ​user>lsblk --fs</​code>​ 
-Lien: [[https://forum.ubuntu-fr.org/viewtopic.php?​id=1271791]] +<code root>​pluma ​/etc/fstab</code>
-Lien: [[https://​www.youtube.com/​watch?​v=-2-A72GDrpY]]+
  
 +<​code>#​ Disque externe HDD_STOCKAGE
 +UUID=94f63283-8e6d-49dc-99db-8d0385d1d797 /​media/​slyfox/​HDD_STOCKAGE ​         ext4    defaults ​          ​0 ​      ​2 ​
 +</​code>​
  
 +<note warning>​Tester si pas d'​erreur sinon risque de plantage lors du prochain démarrage !</​note>​
 +<code root>​mount --all</​code>​
  
 +Donner les droits utilsateur.
 +<code root>​chown -R slyfox:​slyfox /​media/​slyfox/​HDD_STOCKAGE/</​code>​
  
utilisateurs/slyfox/config/configuration-systeme.txt · Dernière modification: 06/01/2024 20:01 par Slyfox

Pied de page des forums

Propulsé par FluxBB