[Clos] Sortie de veille impossible Debian testing

fiche · 15-07-2016 17:37:55

Bonjour,
Depuis environ 2 semaines, lorsque mon PC portable inactif se met en veille, il m'est impossible d'en sortir.
Dans ce cas, j'utilise Ctrl+Alt+F1 pour rouvrir ma session (saisir du nom utilisateur, du mot de passe puis de la commande startx).
Est installé xscreensaver 5.34-2.

Côté configuration, quelques éléments issus de Hardinfo (ci-dessous) :

C'est grave Docteur ?
Merci d'avance.

Computer
Processor Intel(R) Pentium(R) M processor 1.70GHz
Memory 2059MB (499MB used)
Operating System Debian GNU/Linux stretch/sid
Display
Resolution 1280x800 pixels
OpenGL Renderer Mesa DRI Intel(R) 915GM x86/MMX/SSE2
X11 Vendor The X.Org Foundation
Multimedia
Operating System
Version
Kernel Linux 4.6.0-1-686-pae (i686)
Compiled #1 SMP Debian 4.6.3-1 (2016-07-04)
Distribution Debian GNU/Linux stretch/sid
Desktop Environment XFCE 4
Loaded Modules
ppdev
iTCO_wdt Intel TCO WatchDog Timer Driver
iTCO_vendor_support Intel TCO Vendor Specific WatchDog Timer Driver Support
pcmcia PCMCIA Driver Services
pcspkr PC Speaker beeper driver
joydev Joystick device interfaces
evdev Input driver event char devices
serio_raw Raw serio driver
snd_intel8x0 Intel 82801AA,82901AB,i810,i820,i830,i840,i845,MX440; SiS 7012; Ali 5455
ipw2200 Intel(R) PRO/Wireless 2200/2915 Network Driver
libipw 802.11 data/management/control stack
lib80211 common routines for IEEE802.11 drivers
snd_intel8x0m Intel 82801AA,82901AB,i810,i820,i830,i840,i845,MX440; SiS 7013; NVidia MCP/2/2S/3 modems
snd_ac97_codec Universal interface for Audio Codec '97
snd_pcm Midlevel PCM code for ALSA.
snd_timer ALSA timer interface
cfg80211 wireless configuration support
snd Advanced Linux Sound Architecture driver for soundcards.
lpc_ich LPC interface for Intel ICH
tifm_7xx1 TI FlashMedia host driver
mfd_core
i2c_i801 I801 SMBus driver
tifm_core TI FlashMedia core driver
yenta_socket
pcmcia_rsrc
soundcore Core sound module
pcmcia_core Linux Kernel Card Services
sg SCSI generic (sg) driver
toshiba_bluetooth Toshiba Laptop ACPI Bluetooth Enable Driver
rng_core H/W Random Number Generator (RNG) driver
ac97_bus
i915 Intel Graphics
8250_fintek Fintek F812164 module
parport_pc PC-style parallel port driver
rfkill RF switch support
parport
drm_kms_helper DRM KMS helper
battery ACPI Battery Driver
ac ACPI AC Adapter Driver
irda The Linux IrDA Protocol Stack
crc_ccitt CRC-CCITT calculations
shpchp Standard Hot Plug PCI Controller Driver
acpi_cpufreq ACPI Processor P-States Driver
tpm_tis TPM Driver
button ACPI Button Driver
video ACPI Video Driver
drm DRM shared core routines
i2c_algo_bit I2C-Bus bit-banging algorithm
tpm TPM Driver
processor ACPI Processor Driver
ip6t_REJECT Xtables: packet "rejection" target for IPv6
nf_reject_ipv6
nf_log_ipv6 Netfilter IPv6 packet logging
xt_hl Xtables: Hoplimit/TTL field match
ip6t_rt Xtables: IPv6 Routing Header match
nf_conntrack_ipv6
nf_defrag_ipv6
ipt_REJECT Xtables: packet "rejection" target for IPv4
nf_reject_ipv4
nf_log_ipv4 Netfilter IPv4 packet logging
nf_log_common
xt_LOG Xtables: IPv4/IPv6 packet logging
xt_limit Xtables: rate-limit match
xt_tcpudp Xtables: TCP, UDP and UDP-Lite match
xt_addrtype Xtables: address type match
nf_conntrack_ipv4
nf_defrag_ipv4
xt_conntrack Xtables: connection tracking state match
ip6table_filter ip6tables filter table
binfmt_misc
ip6_tables IPv6 packet filter
nf_conntrack_netbios_ns NetBIOS name service broadcast connection tracking helper
nf_conntrack_broadcast
nf_nat_ftp ftp NAT helper
nf_nat
nf_conntrack_ftp ftp connection tracking helper
nf_conntrack
iptable_filter iptables filter table
ip_tables IPv4 packet filter
sunrpc
x_tables {ip,ip6,arp,eb}_tables backend module
autofs4
ext4 Fourth Extended Filesystem
ecb ECB block cipher algorithm
xts XTS block cipher mode
lrw LRW block cipher mode
gf128mul Functions for multiplying elements of GF(2^128)
ablk_helper
cryptd Software async crypto daemon
aes_i586 Rijndael (AES) Cipher Algorithm, asm optimized
crc16 CRC16 calculations
jbd2
crc32c_generic CRC32c (Castagnoli) calculations wrapper for lib/crc32c
mbcache Meta block cache (for extended attributes)
sr_mod SCSI cdrom (sr) driver
cdrom
sd_mod SCSI disk (sd) driver
ata_generic low-level driver for generic ATA
psmouse PS/2 mouse driver
ata_piix SCSI low-level driver for Intel PIIX/ICH ATA controllers
ahci AHCI SATA low-level driver
libahci Common AHCI SATA low-level routines
libata Library module for ATA devices
scsi_mod SCSI core
8139too RealTek RTL-8139 Fast Ethernet driver
8139cp RealTek RTL-8139C+ series 10/100 PCI Ethernet driver
mii MII hardware support library
firewire_ohci Driver for PCI OHCI IEEE1394 controllers
sdhci_pci Secure Digital Host Controller Interface PCI driver
sdhci Secure Digital Host Controller Interface core driver
mmc_core
firewire_core Core IEEE1394 transaction logic
crc_itu_t CRC ITU-T V.41 calculations
ehci_pci EHCI PCI platform driver
uhci_hcd USB Universal Host Controller Interface driver
ehci_hcd USB 2.0 'Enhanced' Host Controller (EHCI) Driver
usbcore
usb_common

Devices
PCI Devices
Host bridge Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller
VGA compatible controller Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller
Display controller Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller
PCI bridge Intel Corporation 82801FB/FBM/FR/FW/FRW
PCI bridge Intel Corporation 82801FB/FBM/FR/FW/FRW
USB controller Intel Corporation 82801FB/FBM/FR/FW/FRW
USB controller Intel Corporation 82801FB/FBM/FR/FW/FRW
USB controller Intel Corporation 82801FB/FBM/FR/FW/FRW
USB controller Intel Corporation 82801FB/FBM/FR/FW/FRW
USB controller Intel Corporation 82801FB/FBM/FR/FW/FRW
PCI bridge Intel Corporation 82801 Mobile PCI Bridge
Multimedia audio controller Intel Corporation 82801FB/FBM/FR/FW/FRW
Modem Intel Corporation 82801FB/FBM/FR/FW/FRW
ISA bridge Intel Corporation 82801FBM
IDE interface Intel Corporation 82801FB/FBM/FR/FW/FRW
IDE interface Intel Corporation 82801FBM
SMBus Intel Corporation 82801FB/FBM/FR/FW/FRW
Ethernet controller Realtek Semiconductor Co., Ltd. RTL-8100/8101L/8139 PCI Fast Ethernet Adapter
Network controller Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection
CardBus bridge Texas Instruments PCIxx21/x515 Cardbus Controller
FireWire (IEEE 1394) Texas Instruments OHCI Compliant IEEE 1394 Host Controller
Mass storage controller Texas Instruments PCIxx21 Integrated FlashMedia Controller
SD Host controller Texas Instruments PCI6411/6421/6611/6621/7411/7421/7611/7621 Secure Digital Controller

Dernière modification par fiche (24-07-2016 13:14:28)

Severian · 15-07-2016 17:57:54

bonsoir
si je comprends bien, ton portable se met en veille (ton écran) et pour le r'allumer tu dois passer par la console tty

que donne

dmesg -l err,crit

et

cat /var/log/Xorg.0.log

fiche · 15-07-2016 18:08:35

L'écran se met en veille (écran noir) et ne réagit plus (touche frappée, touchpad utilisé) alors qu'auparavant tout était normal.

Aucune réponse pour la commande : dmesg -l err,crit

Pour

cat /var/log/Xorg.0.log

[    35.222] 

X.Org X Server 1.18.3

Release Date: 2016-04-04

[    35.222] X Protocol Version 11, Revision 0

[    35.222] Build Operating System: Linux 3.16.0-4-amd64 i686 Debian

[    35.222] Current Operating System: Linux PC 4.6.0-1-686-pae #1 SMP Debian 4.6.3-1 (2016-07-04) i686

[    35.222] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.6.0-1-686-pae root=UUID=07a7ec10-a837-4e78-a070-1e2398390094 ro quiet

[    35.222] Build Date: 05 April 2016  07:01:49AM

[    35.222] xorg-server 2:1.18.3-1 (http://www.debian.org/support) 

[    35.222] Current version of pixman: 0.33.6

[    35.222]  Before reporting problems, check http://wiki.x.org

  to make sure that you have the latest version.

[    35.222] Markers: (--) probed, (**) from config file, (==) default setting,

  (++) from command line, (!!) notice, (II) informational,

  (WW) warning, (EE) error, (NI) not implemented, (??) unknown.

[    35.222] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jul 15 18:05:33 2016

[    35.787] (==) Using config directory: "/etc/X11/xorg.conf.d"

[    35.787] (==) Using system config directory "/usr/share/X11/xorg.conf.d"

[    36.136] (==) No Layout section.  Using the first Screen section.

[    36.136] (==) No screen section available. Using defaults.

[    36.136] (**) |-->Screen "Default Screen Section" (0)

[    36.136] (**) |   |-->Monitor "<default monitor>"

[    36.154] (==) No monitor specified for screen "Default Screen Section".

  Using a default monitor configuration.

[    36.154] (==) Automatically adding devices

[    36.154] (==) Automatically enabling devices

[    36.154] (==) Automatically adding GPU devices

[    36.154] (==) Max clients allowed: 256, resource mask: 0x1fffff

[    36.220] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.

[    36.220]  Entry deleted from font path.

[    36.296] (==) FontPath set to:

  /usr/share/fonts/X11/misc,

  /usr/share/fonts/X11/100dpi/:unscaled,

  /usr/share/fonts/X11/75dpi/:unscaled,

  /usr/share/fonts/X11/Type1,

  /usr/share/fonts/X11/100dpi,

  /usr/share/fonts/X11/75dpi,

  built-ins

[    36.296] (==) ModulePath set to "/usr/lib/xorg/modules"

[    36.296] (II) The server relies on udev to provide the list of input devices.

  If no devices become available, reconfigure udev or disable AutoAddDevices.

[    36.296] (II) Loader magic: 0x80333700

[    36.296] (II) Module ABI versions:

[    36.296]  X.Org ANSI C Emulation: 0.4

[    36.296]  X.Org Video Driver: 20.0

[    36.296]  X.Org XInput driver : 22.1

[    36.296]  X.Org Server Extension : 9.0

[    36.299] (++) using VT number 7

[    36.299] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration

[    36.301] (II) xfree86: Adding drm device (/dev/dri/card0)

[    36.307] (--) PCI:*(0:0:2:0) 8086:2592:1179:ff04 rev 3, Mem @ 0xb0080000/524288, 0xc0000000/268435456, 0xb0000000/262144, I/O @ 0x00001800/8, BIOS @ 0x????????/131072

[    36.307] (--) PCI: (0:0:2:1) 8086:2792:1179:ff04 rev 3, Mem @ 0x80000000/524288

[    36.353] (II) LoadModule: "glx"

[    36.425] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so

[    37.196] (II) Module glx: vendor="X.Org Foundation"

[    37.196]  compiled for 1.18.3, module version = 1.0.0

[    37.196]  ABI class: X.Org Server Extension, version 9.0

[    37.196] (==) AIGLX enabled

[    37.196] (==) Matched intel as autoconfigured driver 0

[    37.196] (==) Matched intel as autoconfigured driver 1

[    37.196] (==) Matched modesetting as autoconfigured driver 2

[    37.196] (==) Matched fbdev as autoconfigured driver 3

[    37.196] (==) Matched vesa as autoconfigured driver 4

[    37.196] (==) Assigned the driver to the xf86ConfigLayout

[    37.196] (II) LoadModule: "intel"

[    37.317] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so

[    37.430] (II) Module intel: vendor="X.Org Foundation"

[    37.430]  compiled for 1.18.3, module version = 2.99.917

[    37.430]  Module class: X.Org Video Driver

[    37.430]  ABI class: X.Org Video Driver, version 20.0

[    37.431] (II) LoadModule: "modesetting"

[    37.431] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so

[    37.505] (II) Module modesetting: vendor="X.Org Foundation"

[    37.505]  compiled for 1.18.3, module version = 1.18.3

[    37.505]  Module class: X.Org Video Driver

[    37.505]  ABI class: X.Org Video Driver, version 20.0

[    37.505] (II) LoadModule: "fbdev"

[    37.505] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so

[    37.525] (II) Module fbdev: vendor="X.Org Foundation"

[    37.525]  compiled for 1.18.0, module version = 0.4.4

[    37.525]  Module class: X.Org Video Driver

[    37.525]  ABI class: X.Org Video Driver, version 20.0

[    37.525] (II) LoadModule: "vesa"

[    37.525] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so

[    37.589] (II) Module vesa: vendor="X.Org Foundation"

[    37.589]  compiled for 1.18.0, module version = 2.3.4

[    37.589]  Module class: X.Org Video Driver

[    37.589]  ABI class: X.Org Video Driver, version 20.0

[    37.589] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:

  i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,

  915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,

  Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,

  GM45, 4 Series, G45/G43, Q45/Q43, G41, B43

[    37.590] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000

[    37.590] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100

[    37.590] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300

[    37.590] (II) modesetting: Driver for Modesetting Kernel Drivers: kms

[    37.590] (II) FBDEV: driver for framebuffer: fbdev

[    37.590] (II) VESA: driver for VESA chipsets: vesa

[    37.622] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20160229

[    37.622] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.917+git20160706-1 (Timo Aaltonen <tjaalton@debian.org>)

[    37.622] (II) intel(0): SNA compiled for use with valgrind

[    37.632] (WW) Falling back to old probe method for modesetting

[    37.632] (WW) Falling back to old probe method for fbdev

[    37.632] (II) Loading sub module "fbdevhw"

[    37.633] (II) LoadModule: "fbdevhw"

[    37.633] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so

[    37.734] (II) Module fbdevhw: vendor="X.Org Foundation"

[    37.734]  compiled for 1.18.3, module version = 0.0.2

[    37.734]  ABI class: X.Org Video Driver, version 20.0

[    37.734] (WW) Falling back to old probe method for vesa

[    37.753] (--) intel(0): Integrated Graphics Chipset: Intel(R) 915GM

[    37.753] (--) intel(0): CPU: x86, sse2; using a maximum of 1 threads

[    37.753] (II) intel(0): Creating default Display subsection in Screen section

  "Default Screen Section" for depth/fbbpp 24/32

[    37.753] (==) intel(0): Depth 24, (--) framebuffer bpp 32

[    37.753] (==) intel(0): RGB weight 888

[    37.753] (==) intel(0): Default visual is TrueColor

[    37.754] (II) intel(0): Output LVDS1 has no monitor section

[    37.755] (--) intel(0): Found backlight control interface acpi_video0 (type 'firmware') for output LVDS1

[    37.755] (II) intel(0): Enabled output LVDS1

[    37.755] (II) intel(0): Output VGA1 has no monitor section

[    37.755] (II) intel(0): Enabled output VGA1

[    37.755] (II) intel(0): Output TV1 has no monitor section

[    37.755] (II) intel(0): Enabled output TV1

[    37.755] (--) intel(0): Using a maximum size of 256x256 for hardware cursors

[    37.755] (II) intel(0): Output VIRTUAL1 has no monitor section

[    37.755] (II) intel(0): Enabled output VIRTUAL1

[    37.755] (--) intel(0): Output LVDS1 using initial mode 1280x800 on pipe 1

[    37.756] (==) intel(0): TearFree disabled

[    37.756] (==) intel(0): DPI set to (96, 96)

[    37.756] (II) Loading sub module "dri2"

[    37.756] (II) LoadModule: "dri2"

[    37.756] (II) Module "dri2" already built-in

[    37.756] (II) Loading sub module "present"

[    37.756] (II) LoadModule: "present"

[    37.756] (II) Module "present" already built-in

[    37.756] (II) UnloadModule: "modesetting"

[    37.756] (II) Unloading modesetting

[    37.757] (II) UnloadModule: "fbdev"

[    37.757] (II) Unloading fbdev

[    37.757] (II) UnloadSubModule: "fbdevhw"

[    37.757] (II) Unloading fbdevhw

[    37.757] (II) UnloadModule: "vesa"

[    37.757] (II) Unloading vesa

[    37.757] (==) Depth 24 pixmap format is 32 bpp

[    37.827] (II) intel(0): SNA initialized with Alviso (gen3) backend

[    37.827] (==) intel(0): Backing store enabled

[    37.827] (==) intel(0): Silken mouse enabled

[    37.828] (II) intel(0): HW Cursor enabled

[    37.829] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.

[    37.830] (==) intel(0): DPMS enabled

[    37.830] (==) intel(0): Display hotplug detection enabled

[    37.840] (II) intel(0): [DRI2] Setup complete

[    37.840] (II) intel(0): [DRI2]   DRI driver: i915

[    37.840] (II) intel(0): [DRI2]   VDPAU driver: va_gl

[    37.840] (II) intel(0): direct rendering: DRI2 enabled

[    37.840] (II) intel(0): hardware support for Present enabled

[    37.840] (--) RandR disabled

[    37.914] (II) SELinux: Disabled on system

[    38.372] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer

[    38.372] (II) AIGLX: enabled GLX_ARB_create_context

[    38.372] (II) AIGLX: enabled GLX_ARB_create_context_profile

[    38.372] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile

[    38.372] (II) AIGLX: enabled GLX_INTEL_swap_event

[    38.372] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control

[    38.372] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB

[    38.372] (II) AIGLX: enabled GLX_ARB_fbconfig_float

[    38.372] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float

[    38.373] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects

[    38.373] (II) AIGLX: Loaded and initialized i915

[    38.373] (II) GLX: Initialized DRI2 GL provider for screen 0

[    38.401] (II) intel(0): switch to mode 1280x800@60.0 on LVDS1 using pipe 1, position (0, 0), rotation normal, reflection none

[    38.401] (II) intel(0): Setting screen physical size to 338 x 211

[    40.145] (II) config/udev: Adding input device Power Button (/dev/input/event5)

[    40.145] (**) Power Button: Applying InputClass "evdev keyboard catchall"

[    40.145] (**) Power Button: Applying InputClass "libinput keyboard catchall"

[    40.145] (II) LoadModule: "libinput"

[    40.157] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so

[    40.258] (II) Module libinput: vendor="X.Org Foundation"

[    40.258]  compiled for 1.18.3, module version = 0.19.0

[    40.258]  Module class: X.Org XInput Driver

[    40.258]  ABI class: X.Org XInput driver, version 22.1

[    40.258] (II) Using input driver 'libinput' for 'Power Button'

[    40.258] (**) Power Button: always reports core events

[    40.258] (**) Option "Device" "/dev/input/event5"

[    40.259] (**) Option "_source" "server/udev"

[    40.259] (II) input device 'Power Button', /dev/input/event5 is tagged by udev as: Keyboard

[    40.259] (II) input device 'Power Button', /dev/input/event5 is a keyboard

[    40.259] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input12/event5"

[    40.259] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)

[    40.259] (**) Option "xkb_model" "pc105"

[    40.259] (**) Option "xkb_layout" "fr"

[    40.259] (**) Option "xkb_variant" "latin9"

[    40.413] (II) input device 'Power Button', /dev/input/event5 is tagged by udev as: Keyboard

[    40.413] (II) input device 'Power Button', /dev/input/event5 is a keyboard

[    40.414] (II) config/udev: Adding input device Video Bus (/dev/input/event2)

[    40.414] (**) Video Bus: Applying InputClass "evdev keyboard catchall"

[    40.414] (**) Video Bus: Applying InputClass "libinput keyboard catchall"

[    40.414] (II) Using input driver 'libinput' for 'Video Bus'

[    40.414] (**) Video Bus: always reports core events

[    40.414] (**) Option "Device" "/dev/input/event2"

[    40.414] (**) Option "_source" "server/udev"

[    40.415] (II) input device 'Video Bus', /dev/input/event2 is tagged by udev as: Keyboard

[    40.415] (II) input device 'Video Bus', /dev/input/event2 is a keyboard

[    40.415] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input9/event2"

[    40.415] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)

[    40.415] (**) Option "xkb_model" "pc105"

[    40.415] (**) Option "xkb_layout" "fr"

[    40.415] (**) Option "xkb_variant" "latin9"

[    40.420] (II) input device 'Video Bus', /dev/input/event2 is tagged by udev as: Keyboard

[    40.420] (II) input device 'Video Bus', /dev/input/event2 is a keyboard

[    40.420] (II) config/udev: Adding input device Power Button (/dev/input/event4)

[    40.420] (**) Power Button: Applying InputClass "evdev keyboard catchall"

[    40.420] (**) Power Button: Applying InputClass "libinput keyboard catchall"

[    40.420] (II) Using input driver 'libinput' for 'Power Button'

[    40.420] (**) Power Button: always reports core events

[    40.420] (**) Option "Device" "/dev/input/event4"

[    40.420] (**) Option "_source" "server/udev"

[    40.421] (II) input device 'Power Button', /dev/input/event4 is tagged by udev as: Keyboard

[    40.421] (II) input device 'Power Button', /dev/input/event4 is a keyboard

[    40.421] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input11/event4"

[    40.421] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)

[    40.421] (**) Option "xkb_model" "pc105"

[    40.421] (**) Option "xkb_layout" "fr"

[    40.421] (**) Option "xkb_variant" "latin9"

[    40.422] (II) input device 'Power Button', /dev/input/event4 is tagged by udev as: Keyboard

[    40.422] (II) input device 'Power Button', /dev/input/event4 is a keyboard

[    40.422] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)

[    40.422] (II) No input driver specified, ignoring this device.

[    40.422] (II) This device may have been added with another device file.

[    40.423] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)

[    40.423] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"

[    40.423] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"

[    40.423] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'

[    40.423] (**) AT Translated Set 2 keyboard: always reports core events

[    40.423] (**) Option "Device" "/dev/input/event0"

[    40.423] (**) Option "_source" "server/udev"

[    40.428] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard

[    40.428] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard

[    40.428] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"

[    40.428] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)

[    40.428] (**) Option "xkb_model" "pc105"

[    40.428] (**) Option "xkb_layout" "fr"

[    40.428] (**) Option "xkb_variant" "latin9"

[    40.429] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard

[    40.429] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard

[    40.430] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/event1)

[    40.430] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "evdev touchpad catchall"

[    40.430] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "libinput touchpad catchall"

[    40.430] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "touchpad catchall"

[    40.430] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "Default clickpad buttons"

[    40.430] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "touchpad catchall"

[    40.430] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "Default clickpad buttons"

[    40.430] (II) LoadModule: "synaptics"

[    40.430] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so

[    40.453] (II) Module synaptics: vendor="X.Org Foundation"

[    40.453]  compiled for 1.18.3, module version = 1.8.3

[    40.453]  Module class: X.Org XInput Driver

[    40.453]  ABI class: X.Org XInput driver, version 22.1

[    40.453] (II) Using input driver 'synaptics' for 'AlpsPS/2 ALPS GlidePoint'

[    40.453] (**) AlpsPS/2 ALPS GlidePoint: always reports core events

[    40.453] (**) Option "Device" "/dev/input/event1"

[    40.453] (--) synaptics: AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 1023 (res 0)

[    40.453] (--) synaptics: AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 767 (res 0)

[    40.453] (--) synaptics: AlpsPS/2 ALPS GlidePoint: pressure range 0 - 127

[    40.453] (II) synaptics: AlpsPS/2 ALPS GlidePoint: device does not report finger width.

[    40.453] (--) synaptics: AlpsPS/2 ALPS GlidePoint: buttons: left right middle

[    40.453] (--) synaptics: AlpsPS/2 ALPS GlidePoint: Vendor 0x2 Product 0x8

[    40.453] (--) synaptics: AlpsPS/2 ALPS GlidePoint: invalid finger width range.  defaulting to 0 - 15

[    40.453] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found

[    40.453] (**) AlpsPS/2 ALPS GlidePoint: always reports core events

[    40.453] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input8/event1"

[    40.453] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD, id 10)

[    40.454] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) MinSpeed is now constant deceleration 2.5

[    40.454] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) MaxSpeed is now 1.75

[    40.454] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) AccelFactor is now 0.156

[    40.454] (**) AlpsPS/2 ALPS GlidePoint: (accel) keeping acceleration scheme 1

[    40.454] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration profile 1

[    40.454] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration factor: 2.000

[    40.454] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration threshold: 4

[    40.454] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found

[    40.455] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/mouse0)

[    40.455] (**) AlpsPS/2 ALPS GlidePoint: Ignoring device from InputClass "touchpad ignore duplicates"

[    40.455] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)

[    40.455] (II) No input driver specified, ignoring this device.

[    40.455] (II) This device may have been added with another device file.

[    40.486] (II) intel(0): EDID vendor "CPT", prod id 5041

[    40.486] (II) intel(0): Printing DDC gathered Modelines:

[    40.486] (II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 801 804 813 -hsync -vsync (48.9 kHz eP)

Edit à toto :
Mis la commande cat en balise Commande user et le retour séparé en balises code.

Severian · 15-07-2016 19:40:53

je pensais à un plantage du serveur xorg, visiblement ce n'est pas ça, du coup je ne vois pas désolé

fiche · 24-07-2016 13:13:54

Bonjour,

En l'absence de piste, je clos ce sujet.
Peut-être que tout rentrera dans l'ordre après une mise à jour de Debian Stetch... Il faut l'espérer !

Debian-facile

#1 15-07-2016 17:37:55

[Clos] Sortie de veille impossible Debian testing

#2 15-07-2016 17:57:54

Re : [Clos] Sortie de veille impossible Debian testing

#3 15-07-2016 18:08:35

Re : [Clos] Sortie de veille impossible Debian testing

#4 15-07-2016 19:40:53

Re : [Clos] Sortie de veille impossible Debian testing

#5 24-07-2016 13:13:54

Re : [Clos] Sortie de veille impossible Debian testing

Pied de page des forums