[Résolu] Problèmes post-installation

tlax38 · 30-04-2018 22:01:23

Salut à tous,
Comme dit dans mon sujet précédent, je suis donc revenu sous Deb Stretch. Install ok mais bien sûr si j'ouvre un topic c'est pas pour rien:

- pendant l'installation, j'ai eu un message me disant qu'un fichier de firmware était manquant. Je ne sais plus le nom. Je l'ai noté sur un papier volant qui est quelque part...

- j'ai voulu installer le pilote avec

apt-get install nvidia-detect

ça me renvoie ça:

Construction de l'arbre des dépendances       

Lecture des informations d'état... Fait

nvidia-detect is already the newest version (375.82-1~deb9u1).

0 mis à jour, 0 nouvellement installés, 0 à enlever et 3 non mis à jour.

Et avec je sais plus quelle commande, j'ai eu une réponse me disant que ma CGU n'était pas détectée.

- j'ai voulu installer Steam, ça s'est bien passé mais quand je le lance j'ai des messages d'erreur relatifs aux librairies 32 bits

Je pense qu'il est de bon ton de poster ceci:

root@CAMPECHE:/etc/apt# cat sources.list

# 

#deb cdrom:[Debian GNU/Linux 9.4.0 _Stretch_ - Official amd64 NETINST 20180310-11:21]/ stretch main

#deb cdrom:[Debian GNU/Linux 9.4.0 _Stretch_ - Official amd64 NETINST 20180310-11:21]/ stretch main

deb http://ftp.fr.debian.org/debian/ stretch main non-free contrib

deb-src http://ftp.fr.debian.org/debian/ stretch main non-free contrib

deb http://security.debian.org/debian-security stretch/updates main non-free contrib

deb-src http://security.debian.org/debian-security stretch/updates main non-free contrib

# stretch-updates, previously known as 'volatile'

deb http://ftp.fr.debian.org/debian/ stretch-updates main non-free contrib

deb-src http://ftp.fr.debian.org/debian/ stretch-updates main non-free contrib

et ça

root@CAMPECHE:/etc/apt# ls -l

total 28

drwxr-xr-x 2 root root 4096 avril 27 20:00 apt.conf.d

-rw-r--r-- 1 root root  104 avril 27 19:55 listchanges.conf

drwxr-xr-x 2 root root 4096 sept. 13  2017 preferences.d

-rw-r--r-- 1 root root  724 avril 30 22:07 sources.list

-rw-r--r-- 1 root root    0 avril 27 08:17 sources.list~

drwxr-xr-x 2 root root 4096 avril 30 19:44 sources.list.d

-rw-r--r-- 1 root root  674 avril 28 20:29 sources.list.save

drwxr-xr-x 2 root root 4096 avril 30 19:44 trusted.gpg.d

et pourquoi pas ça:

ls /etc/apt/sources.list.d/

steam.list

Dernière modification par tlax38 (06-05-2018 10:29:24)

root@rkn · 01-05-2018 17:03:47

salut.

il suffit de lire le journalctl pour chercher le problème.

Chez moi, après installation de nano pour remplacer vi/vim et installation de ccze pour sortie log en couleur, lorsque je lance ma commande:

journalctl | ccze -A

 

j'obtiens :

la couleur rouge signifiant une erreur (failed) je sais que chez moi, je ne suis pas capable de charger les drivers rtl8168g-2.fw ce qui empeche d'avoir mon interface enp0s0 en mode ipv6.

tlax38 · 01-05-2018 19:03:37

D'accord... comment fais-tu pour conserver le code couleur dans ton message sur ce forum?

Croutons · 02-05-2018 10:14:27

Salut
c'est une copie d'écran

tlax38 · 03-05-2018 22:01:33

root@CAMPECHE:/home/tlax38# journalctl | ccze -A

mai 03 22:58:36 CAMPECHE clipit[1118]: /build/glib2.0-B1uXKV/glib2.0-2.50.3/./gobject/gsignal.c:2523: signal 'child-added' is invalid for instance '0x558bd73b6710' of type 'GtkMenu' 

mai 03 22:58:54 CAMPECHE su[5509]: Successful su for root by tlax38 

mai 03 22:58:54 CAMPECHE su[5509]: + /dev/pts/0 tlax38:root 

mai 03 22:58:54 CAMPECHE su[5509]: pam_unix(su:session): session opened for user root by tlax38(uid=1000) 

mai 03 22:58:54 CAMPECHE systemd[1]: Starting Daily apt download activities... 

mai 03 22:58:54 CAMPECHE su[5509]: pam_systemd(su:session): Cannot create session: Already running in a session 

mai 03 22:58:55 CAMPECHE systemd[1]: Started Daily apt download activities. 

mai 03 22:58:55 CAMPECHE systemd[1]: apt-daily.timer: Adding 9h 37min 51.442696s random time. 

mai 03 22:58:55 CAMPECHE systemd[1]: apt-daily.timer: Adding 8h 7min 3.917550s random time.

Dernière modification par tlax38 (04-05-2018 13:07:11)

Blob · 04-05-2018 09:28:09

Salut,

Par soucis de confidentialité, tu devrais editer ton dernier post et supprimer toute les lignes commencant par tracker-extract. 'fin jdis ça, après, c'est toi qui vois.

Que retourne la commande lspci ?

lspci

Dernière modification par Blob (04-05-2018 09:31:28)

tlax38 · 04-05-2018 13:08:37

Blob a écrit :

Salut,

Par soucis de confidentialité, tu devrais editer ton dernier post et supprimer toute les lignes commencant par tracker-extract. 'fin jdis ça, après, c'est toi qui vois.

Que retourne la commande lspci ?
lspci

00.0 Host bridge: Intel Corporation Broadwell-U Host Bridge - DMI (rev 0a)                                                                                                                                      

01.0 PCI bridge: Intel Corporation Broadwell-U PCI Express x16 Controller (rev 0a)                                                                                                                              

02.0 VGA compatible controller: Intel Corporation HD Graphics 5600 (rev 0a)

03.0 Audio device: Intel Corporation Broadwell-U Audio Controller (rev 0a)

14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 05)

16.0 Communication controller: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 (rev 04)

1a.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 (rev 05)

1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 05)

1c.0 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #5 (rev d5)

1c.6 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #7 (rev d5)

1c.7 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #8 (rev d5)

1d.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 (rev 05)

1f.0 ISA bridge: Intel Corporation HM87 Express LPC Controller (rev 05)

1f.2 SATA controller: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] (rev 05)

1f.3 SMBus: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller (rev 05)

00.0 3D controller: NVIDIA Corporation GM107M [GeForce GTX 960M] (rev a2)

00.0 Network controller: Intel Corporation Wireless 3160 (rev 83)

00.0 Ethernet controller: Qualcomm Atheros Killer E220x Gigabit Ethernet Controller (rev 13)

A part ça, modification effectuée.

èfpé · 04-05-2018 13:18:42

Salut tlax38,

S'agit-il toujours de la même machine (un portable semble-t-il) ? Certaines réponses t'ont déjà été apportées en mars.

lspci -k

00:00.0 Host bridge: Intel Corporation Broadwell-U Host Bridge - DMI (rev 0a)

        Subsystem: Micro-Star International Co., Ltd. [MSI] Broadwell-U Host Bridge - DMI

00:01.0 PCI bridge: Intel Corporation Broadwell-U PCI Express x16 Controller (rev 0a)

        Kernel driver in use: pcieport

        Kernel modules: shpchp

00:02.0 VGA compatible controller: Intel Corporation HD Graphics 5600 (rev 0a)

        Subsystem: Micro-Star International Co., Ltd. [MSI] HD Graphics 5600

        Kernel driver in use: i915

        Kernel modules: i915

00:03.0 Audio device: Intel Corporation Broadwell-U Audio Controller (rev 0a)

        Subsystem: Micro-Star International Co., Ltd. [MSI] Broadwell-U Audio Controller

        Kernel driver in use: snd_hda_intel

        Kernel modules: snd_hda_intel

00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 05)

        Subsystem: Micro-Star International Co., Ltd. [MSI] 8 Series/C220 Series Chipset Family USB xHCI

        Kernel driver in use: xhci_hcd

        Kernel modules: xhci_pci

00:16.0 Communication controller: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 (rev 04)

        Subsystem: Micro-Star International Co., Ltd. [MSI] 8 Series/C220 Series Chipset Family MEI Controller

        Kernel driver in use: mei_me

        Kernel modules: mei_me

00:1a.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 (rev 05)

        Subsystem: Micro-Star International Co., Ltd. [MSI] 8 Series/C220 Series Chipset Family USB EHCI

        Kernel driver in use: ehci-pci

        Kernel modules: ehci_pci

00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 05)

        Subsystem: Micro-Star International Co., Ltd. [MSI] 8 Series/C220 Series Chipset High Definition Audio Controller

        Kernel driver in use: snd_hda_intel

        Kernel modules: snd_hda_intel

00:1c.0 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #5 (rev d5)

        Kernel driver in use: pcieport

        Kernel modules: shpchp

00:1c.6 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #7 (rev d5)

        Kernel driver in use: pcieport

        Kernel modules: shpchp

00:1c.7 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #8 (rev d5)

        Kernel driver in use: pcieport

        Kernel modules: shpchp

00:1d.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 (rev 05)

        Subsystem: Micro-Star International Co., Ltd. [MSI] 8 Series/C220 Series Chipset Family USB EHCI

        Kernel driver in use: ehci-pci

        Kernel modules: ehci_pci

00:1f.0 ISA bridge: Intel Corporation HM87 Express LPC Controller (rev 05)

        Subsystem: Micro-Star International Co., Ltd. [MSI] HM87 Express LPC Controller

        Kernel driver in use: lpc_ich

        Kernel modules: lpc_ich

00:1f.2 SATA controller: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] (rev 05)

        Subsystem: Micro-Star International Co., Ltd. [MSI] 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode]

        Kernel driver in use: ahci

        Kernel modules: ahci

00:1f.3 SMBus: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller (rev 05)

        Subsystem: Micro-Star International Co., Ltd. [MSI] 8 Series/C220 Series Chipset Family SMBus Controller

        Kernel driver in use: i801_smbus

        Kernel modules: i2c_i801

01:00.0 3D controller: NVIDIA Corporation GM107M [GeForce GTX 960M] (rev a2)

        Subsystem: Micro-Star International Co., Ltd. [MSI] GM107M [GeForce GTX 960M]

        Kernel driver in use: nouveau

        Kernel modules: nouveau

03:00.0 Network controller: Intel Corporation Wireless 3160 (rev 83)

        Subsystem: Intel Corporation Dual Band Wireless AC 3160

        Kernel modules: iwlwifi

04:00.0 Ethernet controller: Qualcomm Atheros Killer E220x Gigabit Ethernet Controller (rev 13)

        Subsystem: Micro-Star International Co., Ltd. [MSI] Killer E220x Gigabit Ethernet Controller

        Kernel driver in use: alx

        Kernel modules: alx

Note : tant qu'à refaire, le retour de lspci -nnk sera plus intéressant que celui d'un simple lspci.

lspci -k | egrep -iA3 'vga|3d'

00:02.0 VGA compatible controller: Intel Corporation HD Graphics 5600 (rev 0a)

        Subsystem: Micro-Star International Co., Ltd. [MSI] HD Graphics 5600

        Kernel driver in use: i915

        Kernel modules: i915

01:00.0 3D controller: NVIDIA Corporation GM107M [GeForce GTX 960M] (rev a2)

        Subsystem: Micro-Star International Co., Ltd. [MSI] GM107M [GeForce GTX 960M]

        Kernel driver in use: nouveau

        Kernel modules: nouveau

On ne peut pas dire que les contrôleurs graphiques (GPU, pas CGU) ne sont pas détectés, que donnent :

cat /var/log/Xorg.0.log

nvidia-detect

Note : comme son nom l'indique nvidia-detect détecte, mais n'installe rien... c'est mieux, en l'occurrence.
Comme déjà indiqué par chalu, la prise en charge du 3D NVIDIA relève de Bumblebee/bumblebee-nvidia.

dmesg -t | grep firmware

iwlwifi 0000:03:00.0: firmware: failed to load iwlwifi-3160-17.ucode (-2)

iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-3160-17.ucode failed with error -2

bluetooth hci0: firmware: failed to load intel/ibt-hw-37.7.10-fw-1.0.1.2d.d.bseq (-2)

bluetooth hci0: Direct firmware load for intel/ibt-hw-37.7.10-fw-1.0.1.2d.d.bseq failed with error -2

Bluetooth: hci0 failed to open Intel firmware file: intel/ibt-hw-37.7.10-fw-1.0.1.2d.d.bseq(-2)

bluetooth hci0: firmware: failed to load intel/ibt-hw-37.7.bseq (-2)

bluetooth hci0: Direct firmware load for intel/ibt-hw-37.7.bseq failed with error -2

Comme déjà indiqué par chalu, il te faut installer le paquet firmware-iwlwifi (proprement... si possible) !

tlax38 · 04-05-2018 15:16:50

En effet il s'agit du même pc. Entre temps, j'ai été un peut sous Ubuntu mais j'en suis revenu.

root@CAMPECHE:/home/tlax38# lspci -k | egrep -iA3 'vga|3d'

00:02.0 VGA compatible controller: Intel Corporation HD Graphics 5600 (rev 0a)

        Subsystem: Micro-Star International Co., Ltd. [MSI] HD Graphics 5600

        Kernel driver in use: i915

        Kernel modules: i915

--

01:00.0 3D controller: NVIDIA Corporation GM107M [GeForce GTX 960M] (rev a2)

        Subsystem: Micro-Star International Co., Ltd. [MSI] GM107M [GeForce GTX 960M]

        Kernel driver in use: nouveau

        Kernel modules: nouveau

root@CAMPECHE:/home/tlax38# cat /var/log/Xorg.0.log

cat: /var/log/Xorg.0.log: Aucun fichier ou dossier de ce type

root@CAMPECHE:/home/tlax38# nvidia-detect

No NVIDIA GPU detected.

root@CAMPECHE:/home/tlax38# dmesg -t | grep firmware

iwlwifi 0000:03:00.0: firmware: failed to load iwlwifi-3160-17.ucode (-2)

iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-3160-17.ucode failed with error -2

bluetooth hci0: firmware: failed to load intel/ibt-hw-37.7.10-fw-1.0.1.2d.d.bseq (-2)

bluetooth hci0: Direct firmware load for intel/ibt-hw-37.7.10-fw-1.0.1.2d.d.bseq failed with error -2

Bluetooth: hci0 failed to open Intel firmware file: intel/ibt-hw-37.7.10-fw-1.0.1.2d.d.bseq(-2)

bluetooth hci0: firmware: failed to load intel/ibt-hw-37.7.bseq (-2)

bluetooth hci0: Direct firmware load for intel/ibt-hw-37.7.bseq failed with error -2

èfpé · 04-05-2018 15:32:42

Re-,

OK ; quel est l'environnement de bureau actif, GNOME ? dans ce cas le fichier journal du serveur X se trouve ailleurs :

cat /home/$USER/.local/share/xorg/Xorg.0.log

Confirmer qu'il s'agit d'un portable et en donner les références exactes et précises pourrait s'avérer utile,

dmesg -t | grep -i dmi:

Quant à l'installation de Steam il y a un paquet dans le dépôt stretch officiel, ainsi qu'un tuto dans le wiki.

tlax38 · 04-05-2018 15:39:57

cat: /home/root/.local/share/xorg/Xorg.0.log: Aucun fichier ou dossier de ce type

root@CAMPECHE:/home/tlax38# dmesg -t | grep -i dmi:

DMI: Micro-Star International Co., Ltd. GE72 2QC/MS-1792, BIOS E1792IMS.119 07/05/2016

C'est bien un laptop et je suis effectivement sous Gnome.

èfpé · 04-05-2018 15:58:42

Re-,

OK ; la commande cat machin n'a pas à être exécutée avec les privilèges du super-utilisateur... tu peux recommencer.

tlax38 · 04-05-2018 16:18:17

[    45.439] (--) Log file renamed from "/home/tlax38/.local/share/xorg/Xorg.pid-899.log" to "/home/tlax38/.local/share/xorg/Xorg.0.log"

[    45.440] 

X.Org X Server 1.19.2

Release Date: 2017-03-02

[    45.440] X Protocol Version 11, Revision 0

[    45.440] Build Operating System: Linux 4.9.0-4-amd64 x86_64 Debian

[    45.440] Current Operating System: Linux CAMPECHE 4.9.0-6-amd64 #1 SMP Debian 4.9.88-1 (2018-04-29) x86_64

[    45.440] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-6-amd64 root=UUID=6d79d8e4-bf94-47bc-adbf-5f0248582a1f ro quiet

[    45.440] Build Date: 16 October 2017  08:19:45AM

[    45.440] xorg-server 2:1.19.2-1+deb9u2 (https://www.debian.org/support) 

[    45.440] Current version of pixman: 0.34.0

[    45.440]    Before reporting problems, check http://wiki.x.org

        to make sure that you have the latest version.

[    45.440] Markers: (--) probed, (**) from config file, (==) default setting,

        (++) from command line, (!!) notice, (II) informational,

        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.

[    45.440] (==) Log file: "/home/tlax38/.local/share/xorg/Xorg.0.log", Time: Thu May  3 22:54:53 2018

[    45.478] (==) Using system config directory "/usr/share/X11/xorg.conf.d"

[    45.503] (==) No Layout section.  Using the first Screen section.

[    45.503] (==) No screen section available. Using defaults.

[    45.503] (**) |-->Screen "Default Screen Section" (0)

[    45.503] (**) |   |-->Monitor "<default monitor>"

[    45.504] (==) No monitor specified for screen "Default Screen Section".

        Using a default monitor configuration.

[    45.504] (==) Automatically adding devices

[    45.504] (==) Automatically enabling devices

[    45.504] (==) Automatically adding GPU devices

[    45.504] (==) Max clients allowed: 256, resource mask: 0x1fffff

[    45.504] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.

[    45.504]    Entry deleted from font path.

[    45.504] (==) FontPath set to:

        /usr/share/fonts/X11/misc,

        /usr/share/fonts/X11/100dpi/:unscaled,

        /usr/share/fonts/X11/75dpi/:unscaled,

        /usr/share/fonts/X11/Type1,

        /usr/share/fonts/X11/100dpi,

        /usr/share/fonts/X11/75dpi,

        built-ins

[    45.504] (==) ModulePath set to "/usr/lib/xorg/modules"

[    45.504] (II) The server relies on udev to provide the list of input devices.

        If no devices become available, reconfigure udev or disable AutoAddDevices.

[    45.504] (II) Loader magic: 0x561e3806ce00

[    45.504] (II) Module ABI versions:

[    45.504]    X.Org ANSI C Emulation: 0.4

[    45.504]    X.Org Video Driver: 23.0

[    45.504]    X.Org XInput driver : 24.1

[    45.504]    X.Org Server Extension : 10.0

[    45.505] (++) using VT number 2

[    45.506] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_32

[    45.507] (II) xfree86: Adding drm device (/dev/dri/card1)

[    45.507] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 12 paused 0

[    45.507] (II) xfree86: Adding drm device (/dev/dri/card0)

[    45.508] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 13 paused 0

[    45.509] (--) PCI:*(0:0:2:0) 8086:1612:1462:1139 rev 10, Mem @ 0xa1000000/16777216, 0xb0000000/268435456, I/O @ 0x00005000/64, BIOS @ 0x????????/131072

[    45.509] (--) PCI: (0:1:0:0) 10de:139b:1462:1139 rev 162, Mem @ 0xa2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00004000/128, BIOS @ 0x????????/524288

[    45.509] (II) LoadModule: "glx"

[    45.518] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so

[    45.536] (II) Module glx: vendor="X.Org Foundation"

[    45.536]    compiled for 1.19.2, module version = 1.0.0

[    45.536]    ABI class: X.Org Server Extension, version 10.0

[    45.536] (==) Matched nouveau as autoconfigured driver 0

[    45.536] (==) Matched nv as autoconfigured driver 1

[    45.536] (==) Matched modesetting as autoconfigured driver 2

[    45.536] (==) Matched fbdev as autoconfigured driver 3

[    45.536] (==) Matched vesa as autoconfigured driver 4

[    45.536] (==) Assigned the driver to the xf86ConfigLayout

[    45.536] (II) LoadModule: "nouveau"

[    45.536] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so

[    45.542] (II) Module nouveau: vendor="X.Org Foundation"

[    45.542]    compiled for 1.19.3, module version = 1.0.13

[    45.542]    Module class: X.Org Video Driver

[    45.542]    ABI class: X.Org Video Driver, version 23.0

[    45.542] (II) LoadModule: "nv"

[    45.543] (WW) Warning, couldn't open module nv

[    45.543] (II) UnloadModule: "nv"

[    45.543] (II) Unloading nv

[    45.543] (EE) Failed to load module "nv" (module does not exist, 0)

[    45.543] (II) LoadModule: "modesetting"

[    45.543] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so

[    45.550] (II) Module modesetting: vendor="X.Org Foundation"

[    45.550]    compiled for 1.19.2, module version = 1.19.2

[    45.550]    Module class: X.Org Video Driver

[    45.550]    ABI class: X.Org Video Driver, version 23.0

[    45.550] (II) LoadModule: "fbdev"

[    45.550] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so

[    45.551] (II) Module fbdev: vendor="X.Org Foundation"

[    45.551]    compiled for 1.19.0, module version = 0.4.4

[    45.551]    Module class: X.Org Video Driver

[    45.551]    ABI class: X.Org Video Driver, version 23.0

[    45.551] (II) LoadModule: "vesa"

[    45.551] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so

[    45.552] (II) Module vesa: vendor="X.Org Foundation"

[    45.552]    compiled for 1.19.0, module version = 2.3.4

[    45.552]    Module class: X.Org Video Driver

[    45.552]    ABI class: X.Org Video Driver, version 23.0

[    45.552] (II) NOUVEAU driver Date:   Tue Sep 20 00:31:06 2016 -0400

[    45.552] (II) NOUVEAU driver for NVIDIA chipset families :

[    45.552]    RIVA TNT        (NV04)

[    45.552]    RIVA TNT2       (NV05)

[    45.552]    GeForce 256     (NV10)

[    45.552]    GeForce 2       (NV11, NV15)

[    45.552]    GeForce 4MX     (NV17, NV18)

[    45.552]    GeForce 3       (NV20)

[    45.552]    GeForce 4Ti     (NV25, NV28)

[    45.552]    GeForce FX      (NV3x)

[    45.552]    GeForce 6       (NV4x)

[    45.552]    GeForce 7       (G7x)

[    45.552]    GeForce 8       (G8x)

[    45.552]    GeForce GTX 200 (NVA0)

[    45.552]    GeForce GTX 400 (NVC0)

[    45.552] (II) modesetting: Driver for Modesetting Kernel Drivers: kms

[    45.552] (II) FBDEV: driver for framebuffer: fbdev

[    45.552] (II) VESA: driver for VESA chipsets: vesa

[    45.552] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)

[    45.552] (II) [drm] nouveau interface version: 1.3.1

[    45.552] (EE) Unknown chipset: NV117

[    45.552] (II) modeset(0): using drv /dev/dri/card0

[    45.552] (II) modeset(G0): using drv /dev/dri/card1

[    45.552] (WW) Falling back to old probe method for fbdev

[    45.552] (II) Loading sub module "fbdevhw"

[    45.552] (II) LoadModule: "fbdevhw"

[    45.552] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so

[    45.553] (II) Module fbdevhw: vendor="X.Org Foundation"

[    45.553]    compiled for 1.19.2, module version = 0.0.2

[    45.553]    ABI class: X.Org Video Driver, version 23.0

[    45.553] (WW) Falling back to old probe method for vesa

[    45.553] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support

[    45.553] (II) modeset(0): Creating default Display subsection in Screen section

        "Default Screen Section" for depth/fbbpp 24/32

[    45.553] (==) modeset(0): Depth 24, (==) framebuffer bpp 32

[    45.553] (==) modeset(0): RGB weight 888

[    45.553] (==) modeset(0): Default visual is TrueColor

[    45.553] (II) Loading sub module "glamoregl"

[    45.553] (II) LoadModule: "glamoregl"

[    45.553] (II) Loading /usr/lib/xorg/modules/libglamoregl.so

[    45.563] (II) Module glamoregl: vendor="X.Org Foundation"

[    45.563]    compiled for 1.19.2, module version = 1.0.0

[    45.563]    ABI class: X.Org ANSI C Emulation, version 0.4

[    45.563] (II) glamor: OpenGL accelerated X.org driver based.

[    45.569] (II) glamor: EGL version 1.4 (DRI2):

[    45.570] (II) modeset(0): glamor initialized

[    45.571] (II) modeset(0): Output eDP-1 has no monitor section

[    45.571] (II) modeset(0): Output DP-1 has no monitor section

[    45.573] (II) modeset(0): Output HDMI-1 has no monitor section

[    45.576] (II) modeset(0): Output HDMI-2 has no monitor section

[    45.577] (II) modeset(0): EDID for output eDP-1

[    45.577] (II) modeset(0): Manufacturer: CMN  Model: 1735  Serial#: 0

[    45.577] (II) modeset(0): Year: 2014  Week: 39

[    45.577] (II) modeset(0): EDID Version: 1.4

[    45.577] (II) modeset(0): Digital Display Input

[    45.577] (II) modeset(0): 6 bits per channel

[    45.577] (II) modeset(0): Digital interface is DisplayPort

[    45.577] (II) modeset(0): Max Image Size [cm]: horiz.: 38  vert.: 22

[    45.577] (II) modeset(0): Gamma: 2.20

[    45.577] (II) modeset(0): No DPMS capabilities specified

[    45.577] (II) modeset(0): Supported color encodings: RGB 4:4:4 

[    45.577] (II) modeset(0): First detailed timing is preferred mode

[    45.577] (II) modeset(0): Preferred mode is native pixel format and refresh rate

[    45.577] (II) modeset(0): redX: 0.640 redY: 0.333   greenX: 0.313 greenY: 0.613

[    45.577] (II) modeset(0): blueX: 0.154 blueY: 0.060   whiteX: 0.313 whiteY: 0.329

[    45.577] (II) modeset(0): Manufacturer's mask: 0

[    45.577] (II) modeset(0): Supported detailed timing:

[    45.577] (II) modeset(0): clock: 140.0 MHz   Image Size:  382 x 215 mm

[    45.577] (II) modeset(0): h_active: 1920  h_sync: 1968  h_sync_end 2000 h_blank_end 2102 h_border: 0

[    45.577] (II) modeset(0): v_active: 1080  v_sync: 1083  v_sync_end 1088 v_blanking: 1110 v_border: 0

[    45.577] (II) modeset(0):  N173HGE-E11

[    45.577] (II) modeset(0):  CMN

[    45.577] (II) modeset(0):  N173HGE-E11

[    45.577] (II) modeset(0): EDID (in hex):

[    45.577] (II) modeset(0):   00ffffffffffff000dae351700000000

[    45.577] (II) modeset(0):   271801049526167802d495a355509d27

[    45.577] (II) modeset(0):   0f505400000001010101010101010101

[    45.577] (II) modeset(0):   010101010101b03680b670381e403020

[    45.577] (II) modeset(0):   35007ed710000018000000fe004e3137

[    45.577] (II) modeset(0):   334847452d4531310a20000000fe0043

[    45.577] (II) modeset(0):   4d4e0a202020202020202020000000fe

[    45.577] (II) modeset(0):   004e3137334847452d4531310a20009c

[    45.577] (II) modeset(0): Printing probed modes for output eDP-1

[    45.577] (II) modeset(0): Modeline "1920x1080"x60.0  140.00  1920 1968 2000 2102  1080 1083 1088 1110 -hsync -vsync (66.6 kHz eP)

[    45.577] (II) modeset(0): Modeline "1920x1080"x59.9  138.50  1920 1968 2000 2080  1080 1083 1088 1111 +hsync -vsync (66.6 kHz d)

[    45.577] (II) modeset(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz d)

[    45.577] (II) modeset(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz d)

[    45.577] (II) modeset(0): Modeline "1600x1024"x60.2  103.12  1600 1600 1656 1664  1024 1024 1029 1030 +hsync +vsync (62.0 kHz d)

[    45.577] (II) modeset(0): Modeline "1400x1050"x60.0  122.00  1400 1488 1640 1880  1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)

[    45.577] (II) modeset(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)

[    45.577] (II) modeset(0): Modeline "1440x900"x59.9  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz d)

[    45.577] (II) modeset(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz d)

[    45.577] (II) modeset(0): Modeline "1360x768"x59.8   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsync (47.7 kHz d)

[    45.577] (II) modeset(0): Modeline "1360x768"x60.0   72.00  1360 1408 1440 1520  768 771 781 790 +hsync -vsync (47.4 kHz d)

[    45.577] (II) modeset(0): Modeline "1152x864"x60.0   81.62  1152 1216 1336 1520  864 865 868 895 -hsync +vsync (53.7 kHz d)

[    45.577] (II) modeset(0): Modeline "1024x768"x120.1  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)

[    45.577] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)

[    45.577] (II) modeset(0): Modeline "960x720"x120.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)

[    45.577] (II) modeset(0): Modeline "928x696"x120.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)

[    45.577] (II) modeset(0): Modeline "896x672"x120.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)

[    45.577] (II) modeset(0): Modeline "960x600"x120.0   77.00  960 984 1000 1040  600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)

[    45.577] (II) modeset(0): Modeline "960x540"x120.0   69.25  960 984 1000 1040  540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)

[    45.577] (II) modeset(0): Modeline "800x600"x120.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)

[    45.577] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)

[    45.577] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)

[    45.577] (II) modeset(0): Modeline "840x525"x120.0   73.12  840 892 980 1120  525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)

[    45.577] (II) modeset(0): Modeline "840x525"x119.8   59.50  840 864 880 920  525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)

[    45.577] (II) modeset(0): Modeline "800x512"x120.3   51.56  800 800 828 832  512 512 514 515 doublescan +hsync +vsync (62.0 kHz d)

[    45.577] (II) modeset(0): Modeline "700x525"x120.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)

[    45.577] (II) modeset(0): Modeline "640x512"x120.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)

[    45.577] (II) modeset(0): Modeline "720x450"x119.8   53.25  720 760 836 952  450 451 454 467 doublescan -hsync +vsync (55.9 kHz d)

[    45.577] (II) modeset(0): Modeline "640x480"x120.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)

[    45.577] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)

[    45.577] (II) modeset(0): Modeline "680x384"x119.6   42.38  680 716 784 888  384 385 390 399 doublescan -hsync +vsync (47.7 kHz d)

[    45.577] (II) modeset(0): Modeline "680x384"x119.9   36.00  680 704 720 760  384 385 390 395 doublescan +hsync -vsync (47.4 kHz d)

[    45.578] (II) modeset(0): Modeline "576x432"x120.1   40.81  576 608 668 760  432 432 434 447 doublescan -hsync +vsync (53.7 kHz d)

[    45.578] (II) modeset(0): Modeline "512x384"x120.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)

[    45.578] (II) modeset(0): Modeline "400x300"x120.6   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)

[    45.578] (II) modeset(0): Modeline "400x300"x112.7   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)

[    45.578] (II) modeset(0): Modeline "320x240"x120.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)

[    45.578] (II) modeset(0): EDID for output DP-1

[    45.579] (II) modeset(0): EDID for output HDMI-1

[    45.582] (II) modeset(0): EDID for output HDMI-2

[    45.582] (II) modeset(0): Output eDP-1 connected

[    45.582] (II) modeset(0): Output DP-1 disconnected

[    45.582] (II) modeset(0): Output HDMI-1 disconnected

[    45.582] (II) modeset(0): Output HDMI-2 disconnected

[    45.582] (II) modeset(0): Using exact sizes for initial modes

[    45.582] (II) modeset(0): Output eDP-1 using initial mode 1920x1080 +0+0

[    45.582] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)

[    45.582] (==) modeset(0): DPI set to (96, 96)

[    45.582] (II) Loading sub module "fb"

[    45.582] (II) LoadModule: "fb"

[    45.582] (II) Loading /usr/lib/xorg/modules/libfb.so

[    45.584] (II) Module fb: vendor="X.Org Foundation"

[    45.584]    compiled for 1.19.2, module version = 1.0.0

[    45.584]    ABI class: X.Org ANSI C Emulation, version 0.4

[    45.599] (==) modeset(G0): Depth 24, (==) framebuffer bpp 32

[    45.599] (==) modeset(G0): RGB weight 888

[    45.599] (==) modeset(G0): Default visual is TrueColor

[    45.599] (II) Loading sub module "glamoregl"

[    45.599] (II) LoadModule: "glamoregl"

[    45.599] (II) Loading /usr/lib/xorg/modules/libglamoregl.so

[    45.599] (II) Module glamoregl: vendor="X.Org Foundation"

[    45.599]    compiled for 1.19.2, module version = 1.0.0

[    45.599]    ABI class: X.Org ANSI C Emulation, version 0.4

[    45.599] (II) glamor: OpenGL accelerated X.org driver based.

[    45.766] (II) glamor: EGL version 1.4 (DRI2):

[    45.832] (II) modeset(G0): glamor initialized

[    45.832] (==) modeset(G0): Using gamma correction (1.0, 1.0, 1.0)

[    45.832] (==) modeset(G0): DPI set to (96, 96)

[    45.832] (II) Loading sub module "fb"

[    45.832] (II) LoadModule: "fb"

[    45.832] (II) Loading /usr/lib/xorg/modules/libfb.so

[    45.832] (II) Module fb: vendor="X.Org Foundation"

[    45.832]    compiled for 1.19.2, module version = 1.0.0

[    45.832]    ABI class: X.Org ANSI C Emulation, version 0.4

[    45.832] (II) UnloadModule: "fbdev"

[    45.832] (II) Unloading fbdev

[    45.832] (II) UnloadSubModule: "fbdevhw"

[    45.832] (II) Unloading fbdevhw

[    45.832] (II) UnloadModule: "vesa"

[    45.832] (II) Unloading vesa

[    45.832] (==) Depth 24 pixmap format is 32 bpp

[    45.892] (==) modeset(G0): Backing store enabled

[    45.892] (==) modeset(G0): Silken mouse enabled

[    45.892] (II) modeset(G0): RandR 1.2 enabled, ignore the following RandR disabled message.

[    45.893] (==) modeset(G0): DPMS enabled

[    45.893] (II) modeset(G0): [DRI2] Setup complete

[    45.893] (II) modeset(G0): [DRI2]   DRI driver: nouveau

[    45.893] (II) modeset(G0): [DRI2]   VDPAU driver: nouveau

[    45.948] (==) modeset(0): Backing store enabled

[    45.948] (==) modeset(0): Silken mouse enabled

[    45.948] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.

[    45.948] (==) modeset(0): DPMS enabled

[    45.948] (II) modeset(0): [DRI2] Setup complete

[    45.948] (II) modeset(0): [DRI2]   DRI driver: i965

[    45.948] (II) modeset(0): [DRI2]   VDPAU driver: i965

[    45.948] (--) RandR disabled

[    45.951] (II) SELinux: Disabled on system

[    45.955] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer

[    45.955] (II) AIGLX: enabled GLX_ARB_create_context

[    45.955] (II) AIGLX: enabled GLX_ARB_create_context_profile

[    45.955] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile

[    45.955] (II) AIGLX: enabled GLX_INTEL_swap_event

[    45.955] (II) AIGLX: enabled GLX_SGI_swap_control

[    45.955] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB

[    45.955] (II) AIGLX: enabled GLX_ARB_fbconfig_float

[    45.955] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float

[    45.955] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects

[    45.955] (II) AIGLX: enabled GLX_ARB_create_context_robustness

[    45.955] (II) AIGLX: Loaded and initialized i965

[    45.955] (II) GLX: Initialized DRI2 GL provider for screen 0

[    45.956] (II) modeset(G0): Damage tracking initialized

[    45.957] (II) modeset(0): Damage tracking initialized

[    45.957] (II) modeset(0): Setting screen physical size to 508 x 285

[    45.984] (II) config/udev: Adding input device Power Button (/dev/input/event6)

[    45.984] (**) Power Button: Applying InputClass "libinput keyboard catchall"

[    45.984] (II) LoadModule: "libinput"

[    45.985] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so

[    45.992] (II) Module libinput: vendor="X.Org Foundation"

[    45.992]    compiled for 1.19.0, module version = 0.23.0

[    45.992]    Module class: X.Org XInput Driver

[    45.992]    ABI class: X.Org XInput driver, version 24.1

[    45.992] (II) Using input driver 'libinput' for 'Power Button'

[    45.992] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 26 paused 0

[    45.992] (**) Power Button: always reports core events

[    45.992] (**) Option "Device" "/dev/input/event6"

[    45.992] (**) Option "_source" "server/udev"

[    45.993] (II) input device 'Power Button', /dev/input/event6 is tagged by udev as: Keyboard

[    45.993] (II) input device 'Power Button', /dev/input/event6 is a keyboard

[    45.993] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event6"

[    45.993] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)

[    45.993] (**) Option "xkb_model" "pc105"

[    45.993] (**) Option "xkb_layout" "fr"

[    45.993] (**) Option "xkb_variant" "latin9"

[    46.003] (II) input device 'Power Button', /dev/input/event6 is tagged by udev as: Keyboard

[    46.004] (II) input device 'Power Button', /dev/input/event6 is a keyboard

[    46.004] (II) config/udev: Adding input device Video Bus (/dev/input/event12)

[    46.004] (**) Video Bus: Applying InputClass "libinput keyboard catchall"

[    46.004] (II) Using input driver 'libinput' for 'Video Bus'

[    46.004] (II) systemd-logind: got fd for /dev/input/event12 13:76 fd 29 paused 0

[    46.004] (**) Video Bus: always reports core events

[    46.004] (**) Option "Device" "/dev/input/event12"

[    46.004] (**) Option "_source" "server/udev"

[    46.005] (II) input device 'Video Bus', /dev/input/event12 is tagged by udev as: Keyboard

[    46.005] (II) input device 'Video Bus', /dev/input/event12 is a keyboard

[    46.005] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input13/event12"

[    46.005] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)

[    46.005] (**) Option "xkb_model" "pc105"

[    46.005] (**) Option "xkb_layout" "fr"

[    46.005] (**) Option "xkb_variant" "latin9"

[    46.005] (II) input device 'Video Bus', /dev/input/event12 is tagged by udev as: Keyboard

[    46.005] (II) input device 'Video Bus', /dev/input/event12 is a keyboard

[    46.005] (II) config/udev: Adding input device Video Bus (/dev/input/event13)

[    46.005] (**) Video Bus: Applying InputClass "libinput keyboard catchall"

[    46.005] (II) Using input driver 'libinput' for 'Video Bus'

[    46.006] (II) systemd-logind: got fd for /dev/input/event13 13:77 fd 30 paused 0

[    46.006] (**) Video Bus: always reports core events

[    46.006] (**) Option "Device" "/dev/input/event13"

[    46.006] (**) Option "_source" "server/udev"

[    46.006] (II) input device 'Video Bus', /dev/input/event13 is tagged by udev as: Keyboard

[    46.006] (II) input device 'Video Bus', /dev/input/event13 is a keyboard

[    46.006] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:12/LNXVIDEO:01/input/input14/event13"

[    46.006] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)

[    46.006] (**) Option "xkb_model" "pc105"

[    46.006] (**) Option "xkb_layout" "fr"

[    46.006] (**) Option "xkb_variant" "latin9"

[    46.006] (II) input device 'Video Bus', /dev/input/event13 is tagged by udev as: Keyboard

[    46.006] (II) input device 'Video Bus', /dev/input/event13 is a keyboard

[    46.006] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)

[    46.006] (II) No input driver specified, ignoring this device.

[    46.006] (II) This device may have been added with another device file.

[    46.007] (II) config/udev: Adding input device Power Button (/dev/input/event5)

[    46.007] (**) Power Button: Applying InputClass "libinput keyboard catchall"

[    46.007] (II) Using input driver 'libinput' for 'Power Button'

[    46.007] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 31 paused 0

[    46.007] (**) Power Button: always reports core events

[    46.007] (**) Option "Device" "/dev/input/event5"

[    46.007] (**) Option "_source" "server/udev"

[    46.007] (II) input device 'Power Button', /dev/input/event5 is tagged by udev as: Keyboard

[    46.007] (II) input device 'Power Button', /dev/input/event5 is a keyboard

[    46.007] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6/event5"

[    46.007] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)

[    46.007] (**) Option "xkb_model" "pc105"

[    46.007] (**) Option "xkb_layout" "fr"

[    46.007] (**) Option "xkb_variant" "latin9"

[    46.007] (II) input device 'Power Button', /dev/input/event5 is tagged by udev as: Keyboard

[    46.007] (II) input device 'Power Button', /dev/input/event5 is a keyboard

[    46.008] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)

[    46.008] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"

[    46.008] (II) Using input driver 'libinput' for 'Sleep Button'

[    46.008] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 32 paused 0

[    46.008] (**) Sleep Button: always reports core events

[    46.008] (**) Option "Device" "/dev/input/event4"

[    46.008] (**) Option "_source" "server/udev"

[    46.008] (II) input device 'Sleep Button', /dev/input/event4 is tagged by udev as: Keyboard

[    46.008] (II) input device 'Sleep Button', /dev/input/event4 is a keyboard

[    46.008] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5/event4"

[    46.008] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)

[    46.008] (**) Option "xkb_model" "pc105"

[    46.008] (**) Option "xkb_layout" "fr"

[    46.008] (**) Option "xkb_variant" "latin9"

[    46.008] (II) input device 'Sleep Button', /dev/input/event4 is tagged by udev as: Keyboard

[    46.008] (II) input device 'Sleep Button', /dev/input/event4 is a keyboard

[    46.009] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event14)

[    46.009] (II) No input driver specified, ignoring this device.

[    46.009] (II) This device may have been added with another device file.

[    46.009] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event15)

[    46.009] (II) No input driver specified, ignoring this device.

[    46.009] (II) This device may have been added with another device file.

[    46.009] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event16)

[    46.009] (II) No input driver specified, ignoring this device.

[    46.009] (II) This device may have been added with another device file.

[    46.010] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event1)

[    46.010] (**) USB Optical Mouse: Applying InputClass "libinput pointer catchall"

[    46.010] (II) Using input driver 'libinput' for 'USB Optical Mouse'

[    46.068] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 33 paused 0

[    46.068] (**) USB Optical Mouse: always reports core events

[    46.068] (**) Option "Device" "/dev/input/event1"

[    46.068] (**) Option "_source" "server/udev"

[    46.068] (II) input device 'USB Optical Mouse', /dev/input/event1 is tagged by udev as: Mouse

[    46.068] (II) input device 'USB Optical Mouse', /dev/input/event1 is a pointer caps

[    46.068] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.0/0003:1BCF:0007.0001/input/input3/event1"

[    46.068] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 11)

[    46.068] (**) Option "AccelerationScheme" "none"

[    46.068] (**) USB Optical Mouse: (accel) selected scheme none/0

[    46.068] (**) USB Optical Mouse: (accel) acceleration factor: 2.000

[    46.068] (**) USB Optical Mouse: (accel) acceleration threshold: 4

[    46.069] (II) input device 'USB Optical Mouse', /dev/input/event1 is tagged by udev as: Mouse

[    46.069] (II) input device 'USB Optical Mouse', /dev/input/event1 is a pointer caps

[    46.069] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse0)

[    46.069] (II) No input driver specified, ignoring this device.

[    46.069] (II) This device may have been added with another device file.

[    46.069] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event9)

[    46.069] (II) No input driver specified, ignoring this device.

[    46.069] (II) This device may have been added with another device file.

[    46.069] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event10)

[    46.069] (II) No input driver specified, ignoring this device.

[    46.069] (II) This device may have been added with another device file.

[    46.070] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)

[    46.070] (II) No input driver specified, ignoring this device.

[    46.070] (II) This device may have been added with another device file.

[    46.070] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)

[    46.070] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"

[    46.070] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'

[    46.070] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 34 paused 0

[    46.070] (**) AT Translated Set 2 keyboard: always reports core events

[    46.070] (**) Option "Device" "/dev/input/event0"

[    46.070] (**) Option "_source" "server/udev"

[    46.070] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard

[    46.070] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard

[    46.070] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"

[    46.070] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)

[    46.071] (**) Option "xkb_model" "pc105"

[    46.071] (**) Option "xkb_layout" "fr"

[    46.071] (**) Option "xkb_variant" "latin9"

[    46.071] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard

[    46.071] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard

[    46.071] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event2)

[    46.071] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"

[    46.071] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad'

[    46.071] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 35 paused 0

[    46.071] (**) SynPS/2 Synaptics TouchPad: always reports core events

[    46.071] (**) Option "Device" "/dev/input/event2"

[    46.071] (**) Option "_source" "server/udev"

[    46.072] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event2 is tagged by udev as: Touchpad

[    46.072] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event2 is a touchpad

[    46.072] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input2/event2"

[    46.072] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)

[    46.072] (**) Option "AccelerationScheme" "none"

[    46.072] (**) SynPS/2 Synaptics TouchPad: (accel) selected scheme none/0

[    46.072] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000

[    46.072] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4

[    46.072] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event2 is tagged by udev as: Touchpad

[    46.072] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event2 is a touchpad

[    46.072] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)

[    46.072] (II) No input driver specified, ignoring this device.

[    46.072] (II) This device may have been added with another device file.

[    46.072] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)

[    46.072] (II) No input driver specified, ignoring this device.

[    46.072] (II) This device may have been added with another device file.

[    46.073] (II) config/udev: Adding input device MSI WMI hotkeys (/dev/input/event11)

[    46.073] (**) MSI WMI hotkeys: Applying InputClass "libinput keyboard catchall"

[    46.073] (II) Using input driver 'libinput' for 'MSI WMI hotkeys'

[    46.073] (II) systemd-logind: got fd for /dev/input/event11 13:75 fd 36 paused 0

[    46.073] (**) MSI WMI hotkeys: always reports core events

[    46.073] (**) Option "Device" "/dev/input/event11"

[    46.073] (**) Option "_source" "server/udev"

[    46.073] (II) input device 'MSI WMI hotkeys', /dev/input/event11 is tagged by udev as: Keyboard

[    46.073] (II) input device 'MSI WMI hotkeys', /dev/input/event11 is a keyboard

[    46.073] (**) Option "config_info" "udev:/sys/devices/virtual/input/input12/event11"

[    46.073] (II) XINPUT: Adding extended input device "MSI WMI hotkeys" (type: KEYBOARD, id 14)

[    46.073] (**) Option "xkb_model" "pc105"

[    46.073] (**) Option "xkb_layout" "fr"

[    46.073] (**) Option "xkb_variant" "latin9"

[    46.073] (II) input device 'MSI WMI hotkeys', /dev/input/event11 is tagged by udev as: Keyboard

[    46.074] (II) input device 'MSI WMI hotkeys', /dev/input/event11 is a keyboard

[    47.944] (II) modeset(0): EDID vendor "CMN", prod id 5941

[    47.944] (II) modeset(0): Printing DDC gathered Modelines:

[    47.944] (II) modeset(0): Modeline "1920x1080"x0.0  140.00  1920 1968 2000 2102  1080 1083 1088 1110 -hsync -vsync (66.6 kHz eP)

[    51.774] (II) modeset(0): EDID vendor "CMN", prod id 5941

[    51.774] (II) modeset(0): Printing DDC gathered Modelines:

[    51.774] (II) modeset(0): Modeline "1920x1080"x0.0  140.00  1920 1968 2000 2102  1080 1083 1088 1110 -hsync -vsync (66.6 kHz eP)

[   516.268] (II) modeset(0): EDID vendor "CMN", prod id 5941

[   516.268] (II) modeset(0): Printing DDC gathered Modelines:

[   516.268] (II) modeset(0): Modeline "1920x1080"x0.0  140.00  1920 1968 2000 2102  1080 1083 1088 1110 -hsync -vsync (66.6 kHz eP)

[ 34010.674] (II) Axis 0 value 1259 is outside expected range [1260, 5917]

See https://wayland.freedesktop.org/libinput/doc/1.6.3//absolute_coordinate_ranges.html for details

[ 38274.862] (II) Axis 0x1 value 1231 is outside expected range [1238, 4969]

See https://wayland.freedesktop.org/libinput/doc/1.6.3//absolute_coordinate_ranges.html for details

[ 62605.179] (II) modeset(0): EDID vendor "CMN", prod id 5941

[ 62605.192] (II) modeset(0): Printing DDC gathered Modelines:

[ 62605.192] (II) modeset(0): Modeline "1920x1080"x0.0  140.00  1920 1968 2000 2102  1080 1083 1088 1110 -hsync -vsync (66.6 kHz eP)

Pour le firmware: en fait, comme c'est le pilote du wifi, je ne vais pas l'installer pour l'instant parce que j'ai débranché accidentellement les 2 petits câbles de la carte wifi et je n'ai jamais réussi à les remettre. Donc elle est de tout façon désactivée.

Sinon, j'installe de ce pas Bumblebee.

Dernière modification par tlax38 (04-05-2018 16:37:41)

tlax38 · 04-05-2018 19:39:40

Bon, je viens de suivre la procédure pour l'installation de Bumblebee; après avoir installé le pilote privatif, j'ai redémarré mon laptop comme c'était conseillé mais je n'y arrive plus: j'arrive jusqu'au Grub, je peux aller sur ma partition windows mais si je choisis Debian, le lancement s'arrête après Bluetooth.

èfpé · 04-05-2018 22:08:42

Re-,

Zut, alors si tu as effectivement suivi le tuto du wiki tu as installé Bumblebee via le paquet bumblebee-nvidia, oui/non ?
Le paquet bumblebee-nvidia dépend du paquet nvidia-driver version 375.82, qui prend en charge le GPU GTX 960M !

As-tu au moins accès à la console ? (Quant aux câbles déconnectés de la carte Wi-Fi, il s'agit des câbles d'antenne.)

tlax38 · 04-05-2018 23:49:47

èfpé a écrit :

Re-,

Zut, alors si tu as effectivement suivi le tuto du wiki tu as installé Bumblebee via le paquet bumblebee-nvidia, oui/non ?
Le paquet bumblebee-nvidia dépend du paquet nvidia-driver version 375.82, qui prend en charge le GPU GTX 960M !

As-tu au moins accès à la console ? (Quant aux câbles déconnectés de la carte Wi-Fi, il s'agit des câbles d'antenne.)

Pas d'accès console (à moins qu'il y en ai un par le grub, genre "options avancées de Debian").

La dernière instruction que j'ai suivie était:

Bumblebee avec 'nvidia'

⇒ Pour installer Bumblebee et gérer le pilote privatif nvidia :

apt install nvidia-kernel-dkms nvidia-xconfig nvidia-settings nvidia-vdpau-driver vdpau-va-driver mesa-utils bumblebee-nvidia primus xserver-xorg-video-nvidia linux-headers-$(uname -r)

èfpé · 05-05-2018 15:04:42

Re-,

Oui, tu peux effectivement tenter le recovery mode (mode de dépannage) et désinstaller l'usine à problèmes NVIDIA :

apt-get remove --purge *nvidia*

Il sera toujours temps de peaufiner (autoremove) et de faire un bon coup d'ménage (Steam) par la suite.

Dernière modification par èfpé (05-05-2018 16:04:42)

tlax38 · 06-05-2018 08:32:01

Bon je suis allé au Premier Samedi (qui tombait vraiment bien) et on m'a aidé à réparer le problème. Je vous écris donc à nouveau depuis ma partie linux; j'ai désinstallé le pilote propriétaire et mis le pilote libre.

chalu · 06-05-2018 10:06:15

\o/

Il ne reste plus qu'à mettre résolu dans le titre de ce fil
Voir le tuto : C'est résolu ! Bravo mais il faut l'indiquer dans l'titre.

Debian-facile

#1 30-04-2018 22:01:23

[Résolu] Problèmes post-installation

#2 01-05-2018 17:03:47

Re : [Résolu] Problèmes post-installation

#3 01-05-2018 19:03:37

Re : [Résolu] Problèmes post-installation

#4 02-05-2018 10:14:27

Re : [Résolu] Problèmes post-installation

#5 03-05-2018 22:01:33

Re : [Résolu] Problèmes post-installation

#6 04-05-2018 09:28:09

Re : [Résolu] Problèmes post-installation

#7 04-05-2018 13:08:37

Re : [Résolu] Problèmes post-installation

#8 04-05-2018 13:18:42

Re : [Résolu] Problèmes post-installation

#9 04-05-2018 15:16:50

Re : [Résolu] Problèmes post-installation

#10 04-05-2018 15:32:42

Re : [Résolu] Problèmes post-installation

#11 04-05-2018 15:39:57

Re : [Résolu] Problèmes post-installation

#12 04-05-2018 15:58:42

Re : [Résolu] Problèmes post-installation

#13 04-05-2018 16:18:17

Re : [Résolu] Problèmes post-installation

#14 04-05-2018 19:39:40

Re : [Résolu] Problèmes post-installation

#15 04-05-2018 22:08:42

Re : [Résolu] Problèmes post-installation

#16 04-05-2018 23:49:47

Re : [Résolu] Problèmes post-installation

#17 05-05-2018 15:04:42

Re : [Résolu] Problèmes post-installation

#18 06-05-2018 08:32:01

Re : [Résolu] Problèmes post-installation

#19 06-05-2018 10:06:15

Re : [Résolu] Problèmes post-installation

Pied de page des forums