logo Debian Debian Debian-France Debian-Facile Debian-fr.org Forum-Debian.fr Debian ? Communautés logo inclusivité

Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#1 02-11-2018 12:58:09

rpochet
Membre
Distrib. : Debian 11.7 Bullseye
Noyau : Linux 4.19.0-25-rt-amd64
Inscription : 02-11-2018

[Résolu] Plus de carte son dans Parametres > son

Bonjour,

Depuis quelques jours, je n'ai plus de son sur mon Intel NUC sous Debian GNU/Linux 9 (stretch) 64 bits. La carte son n'apparait plus dans les parametres son.

alsactl init



Found hardware: "HDA-Intel" "Realtek ALC283" "HDA:10ec0283,80862068,00100003 HDA:8086280b,80860101,00100000" "0x8086" "0x2068"
Hardware is initialized using a generic method



lspci -v


00:1f.3 Audio device: Intel Corporation Device 9d71 (rev 21) (prog-if 80)
  Subsystem: Intel Corporation Device 2068
  Flags: bus master, fast devsel, latency 32, IRQ 128
  Memory at dc240000 (64-bit, non-prefetchable) [size=16K]
  Memory at dc220000 (64-bit, non-prefetchable) [size=64K]
  Capabilities: <access denied>
  Kernel driver in use: snd_hda_intel
  Kernel modules: snd_hda_intel, snd_soc_skl
 



pulseaudio --start


E: [pulseaudio] main.c: Échec lors du démarrage du démon.



dmesg


[    0.000000] Linux version 4.9.0-8-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1) ) #1 SMP Debian 4.9.110-3+deb9u6 (2018-10-08)
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.9.0-8-amd64 root=/dev/mapper/pochet--nuc1--vg-root ro quiet
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
[    0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000070e05fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000070e06000-0x0000000070e06fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000070e07000-0x0000000070e07fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000070e08000-0x000000007a246fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007a247000-0x000000007a6d5fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007a6d6000-0x000000007a718fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007a719000-0x000000007ab35fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007ab36000-0x000000007af4dfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007af4e000-0x000000007affdfff] type 20
[    0.000000] BIOS-e820: [mem 0x000000007affe000-0x000000007affefff] usable
[    0.000000] BIOS-e820: [mem 0x000000007afff000-0x000000007fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000047effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.60 by American Megatrends
[    0.000000] efi:  ACPI 2.0=0x7a6e3000  ACPI=0x7a6e3000  SMBIOS=0x7aead000  SMBIOS 3.0=0x7aeac000  ESRT=0x7aea9518  MPS=0xfcb00  MEMATTR=0x7856d018
[    0.000000] SMBIOS 3.0.0 present.
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x47f000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0080000000 mask 7F80000000 uncachable
[    0.000000]   1 base 007C000000 mask 7FFC000000 uncachable
[    0.000000]   2 base 007B800000 mask 7FFF800000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: last_pfn = 0x7afff max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fcd10-0x000fcd1f] mapped at [ffff9a13c00fcd10]
[    0.000000] esrt: Reserving ESRT space from 0x000000007aea9518 to 0x000000007aea9550.
[    0.000000] Base memory trampoline at [ffff9a13c0096000] 96000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x2eab3a000, 0x2eab3afff] PGTABLE
[    0.000000] BRK [0x2eab3b000, 0x2eab3bfff] PGTABLE
[    0.000000] BRK [0x2eab3c000, 0x2eab3cfff] PGTABLE
[    0.000000] BRK [0x2eab3d000, 0x2eab3dfff] PGTABLE
[    0.000000] BRK [0x2eab3e000, 0x2eab3efff] PGTABLE
[    0.000000] BRK [0x2eab3f000, 0x2eab3ffff] PGTABLE
[    0.000000] BRK [0x2eab40000, 0x2eab40fff] PGTABLE
[    0.000000] BRK [0x2eab41000, 0x2eab41fff] PGTABLE
[    0.000000] BRK [0x2eab42000, 0x2eab42fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x35a8f000-0x36d3efff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x000000007A6E3000 000024 (v02 INTEL )
[    0.000000] ACPI: XSDT 0x000000007A6E30B8 0000EC (v01 INTEL  NUC7i7BN 0000003F AMI  00010013)
[    0.000000] ACPI: FACP 0x000000007A70D480 000114 (v06 INTEL  NUC7i7BN 0000003F AMI  00010013)
[    0.000000] ACPI: DSDT 0x000000007A6E3230 02A24B (v02 INTEL  NUC7i7BN 0000003F INTL 20160422)
[    0.000000] ACPI: FACS 0x000000007AB05F00 000040
[    0.000000] ACPI: APIC 0x000000007A70D598 000084 (v03 INTEL  NUC7i7BN 0000003F AMI  00010013)
[    0.000000] ACPI: FPDT 0x000000007A70D620 000044 (v01 INTEL  NUC7i7BN 0000003F AMI  00010013)
[    0.000000] ACPI: FIDT 0x000000007A70D668 00009C (v01 INTEL  NUC7i7BN 0000003F AMI  00010013)
[    0.000000] ACPI: MCFG 0x000000007A70D708 00003C (v01 INTEL  NUC7i7BN 0000003F MSFT 00000097)
[    0.000000] ACPI: SSDT 0x000000007A70D748 000359 (v01 INTEL  NUC7i7BN 0000003F INTL 20160422)
[    0.000000] ACPI: SSDT 0x000000007A70DAA8 003156 (v02 INTEL  NUC7i7BN 0000003F INTL 20160422)
[    0.000000] ACPI: HPET 0x000000007A710C00 000038 (v01 INTEL  NUC7i7BN 0000003F MSFT 0000005F)
[    0.000000] ACPI: SSDT 0x000000007A710C38 0009B2 (v02 INTEL  NUC7i7BN 0000003F INTL 20160422)
[    0.000000] ACPI: UEFI 0x000000007A7115F0 000042 (v01 INTEL  NUC7i7BN 0000003F      01000013)
[    0.000000] ACPI: SSDT 0x000000007A711638 000770 (v02 INTEL  NUC7i7BN 0000003F INTL 20160422)
[    0.000000] ACPI: SSDT 0x000000007A711DA8 0017AE (v02 INTEL  NUC7i7BN 0000003F INTL 20160422)
[    0.000000] ACPI: LPIT 0x000000007A713558 000094 (v01 INTEL  NUC7i7BN 0000003F MSFT 0000005F)
[    0.000000] ACPI: SSDT 0x000000007A7135F0 000141 (v02 INTEL  NUC7i7BN 0000003F INTL 20160422)
[    0.000000] ACPI: SSDT 0x000000007A713738 00029F (v02 INTEL  NUC7i7BN 0000003F INTL 20160422)
[    0.000000] ACPI: SSDT 0x000000007A7139D8 003002 (v02 INTEL  NUC7i7BN 0000003F INTL 20160422)
[    0.000000] ACPI: DBGP 0x000000007A7169E0 000034 (v01 INTEL  NUC7i7BN 0000003F MSFT 0000005F)
[    0.000000] ACPI: DBG2 0x000000007A716A18 000054 (v00 INTEL  NUC7i7BN 0000003F MSFT 0000005F)
[    0.000000] ACPI: SSDT 0x000000007A716A70 0012E6 (v02 INTEL  NUC7i7BN 0000003F INTL 20160422)
[    0.000000] ACPI: DMAR 0x000000007A717D58 0000A8 (v01 INTEL  NUC7i7BN 0000003F INTL 00000001)
[    0.000000] ACPI: NHLT 0x000000007A717E00 00002D (v00 INTEL  NUC7i7BN 0000003F      01000013)
[    0.000000] ACPI: BGRT 0x000000007A717E30 000038 (v01 INTEL  NUC7i7BN 0000003F AMI  00010013)
[    0.000000] ACPI: TPM2 0x000000007A717E68 000034 (v03 INTEL  NUC7i7BN 0000003F AMI  00000000)
[    0.000000] ACPI: SSDT 0x000000007A717EA0 0001C9 (v01 INTEL  NUC7i7BN 0000003F INTL 20160422)
[    0.000000] ACPI: WSMT 0x000000007A718070 000028 (v01 INTEL  NUC7i7BN 0000003F AMI  00010013)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000047effffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x47effb000-0x47effffff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000047effffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.000000]   node   0: [mem 0x0000000000059000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x0000000070e05fff]
[    0.000000]   node   0: [mem 0x0000000070e08000-0x000000007a246fff]
[    0.000000]   node   0: [mem 0x000000007affe000-0x000000007affefff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000047effffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000047effffff]
[    0.000000] On node 0 totalpages: 4166115
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 26 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 7754 pages used for memmap
[    0.000000]   DMA32 zone: 496198 pages, LIFO batch:31
[    0.000000]   Normal zone: 57280 pages used for memmap
[    0.000000]   Normal zone: 3665920 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x000000007c000000-0x000000007fffffff
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x70e06000-0x70e06fff]
[    0.000000] PM: Registered nosave memory: [mem 0x70e07000-0x70e07fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7a247000-0x7a6d5fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7a6d6000-0x7a718fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7a719000-0x7ab35fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7ab36000-0x7af4dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x7af4e000-0x7affdfff]
[    0.000000] PM: Registered nosave memory: [mem 0x7afff000-0x7fffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x80000000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 35 pages/cpu @ffff9a183ec00000 s105304 r8192 d29864 u524288
[    0.000000] pcpu-alloc: s105304 r8192 d29864 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 4100991
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.9.0-8-amd64 root=/dev/mapper/pochet--nuc1--vg-root ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 16195780K/16664460K available (6254K kernel code, 1159K rwdata, 2872K rodata, 1420K init, 688K bss, 468680K reserved, 0K cma-reserved)
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 64.
[    0.000000]  RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000] NR_IRQS:33024 nr_irqs:1024 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Detected 3500.000 MHz processor
[    0.000029] Calibrating delay loop (skipped), value calculated using timer frequency.. 7008.00 BogoMIPS (lpj=14016000)
[    0.000031] pid_max: default: 32768 minimum: 301
[    0.000043] ACPI: Core revision 20160831
[    0.027087] ACPI: 11 ACPI AML tables successfully acquired and loaded
[    0.027714] Security Framework initialized
[    0.027715] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.027718] AppArmor: AppArmor disabled by boot time parameter
[    0.028281] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.031711] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.033356] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.033365] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.033660] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.033661] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.033666] mce: CPU supports 9 MCE banks
[    0.033674] CPU0: Thermal monitoring enabled (TM1)
[    0.033688] process: using mwait in idle threads
[    0.033690] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.033691] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.033692] Spectre V2 : Mitigation: Full generic retpoline
[    0.033692] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.033693] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[    0.033693] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.033693] Speculative Store Bypass: Vulnerable
[    0.037291] Freeing SMP alternatives memory: 24K
[    0.041083] ftrace: allocating 25284 entries in 99 pages
[    0.059105] smpboot: Max logical packages: 2
[    0.059108] DMAR: Host address width 39
[    0.059109] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.059115] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
[    0.059116] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.059119] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[    0.059120] DMAR: RMRR base: 0x0000007a657000 end: 0x0000007a676fff
[    0.059121] DMAR: RMRR base: 0x0000007b800000 end: 0x0000007fffffff
[    0.059122] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.059123] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.059123] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.060609] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.060610] x2apic enabled
[    0.060621] Switched APIC routing to cluster x2apic.
[    0.064539] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.104232] TSC deadline timer enabled
[    0.104236] smpboot: CPU0: Intel(R) Core(TM) i7-7567U CPU @ 3.50GHz (family: 0x6, model: 0x8e, stepping: 0x9)
[    0.104239] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.104261] ... version:                4
[    0.104262] ... bit width:              48
[    0.104262] ... generic registers:      4
[    0.104262] ... value mask:             0000ffffffffffff
[    0.104263] ... max period:             00007fffffffffff
[    0.104263] ... fixed-purpose events:   3
[    0.104263] ... event mask:             000000070000000f
[    0.104725] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.104801] x86: Booting SMP configuration:
[    0.104801] .... node  #0, CPUs:      #1 #2 #3
[    0.112252] x86: Booted up 1 node, 4 CPUs
[    0.112254] smpboot: Total of 4 processors activated (28032.00 BogoMIPS)
[    0.115788] devtmpfs: initialized
[    0.115833] x86/mm: Memory block size: 128MB
[    0.118307] PM: Registering ACPI NVS region [mem 0x70e06000-0x70e06fff] (4096 bytes)
[    0.118308] PM: Registering ACPI NVS region [mem 0x7a719000-0x7ab35fff] (4313088 bytes)
[    0.118393] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.118399] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.118434] pinctrl core: initialized pinctrl subsystem
[    0.118513] NET: Registered protocol family 16
[    0.131465] cpuidle: using governor ladder
[    0.151502] cpuidle: using governor menu
[    0.151547] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.151547] ACPI: bus type PCI registered
[    0.151548] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.151597] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.151598] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.151607] PCI: Using configuration type 1 for base access
[    0.167629] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[    0.167629] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.167812] ACPI: Added _OSI(Module Device)
[    0.167812] ACPI: Added _OSI(Processor Device)
[    0.167813] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.167813] ACPI: Added _OSI(Processor Aggregator Device)
[    0.169742] ACPI Error: [_SB_.PCI0.RP05.PXSX] Namespace lookup failure, AE_NOT_FOUND (20160831/dswload2-191)
[    0.169748] ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20160831/psobject-238)
[    0.169750] ACPI Error: Method parse/execution failed [\_SB.PCI0.RP04.PXSX] (Node ffff9a182e1bdb90), AE_NOT_FOUND (20160831/psparse-543)
[    0.169977] ACPI Error: [_SB_.PCI0.RP09.PXSX] Namespace lookup failure, AE_NOT_FOUND (20160831/dswload2-191)
[    0.169980] ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20160831/psobject-238)
[    0.169982] ACPI Error: Method parse/execution failed [\_SB.PCI0.RP08.PXSX] (Node ffff9a182e1bbf50), AE_NOT_FOUND (20160831/psparse-543)
[    0.171053] ACPI: Executed 50 blocks of module-level executable AML code
[    0.180519] ACPI: Dynamic OEM Table Load:
[    0.180524] ACPI: SSDT 0xFFFF9A182BE8E000 0007BC (v02 PmRef  Cpu0Ist  00003000 INTL 20160422)
[    0.180687] ACPI: Executed 1 blocks of module-level executable AML code
[    0.180745] ACPI: \_PR_.PR00: _OSC native thermal LVT Acked
[    0.181708] ACPI: Dynamic OEM Table Load:
[    0.181711] ACPI: SSDT 0xFFFF9A182BCDEC00 0003FF (v02 PmRef  Cpu0Cst  00003001 INTL 20160422)
[    0.181864] ACPI: Executed 1 blocks of module-level executable AML code
[    0.182216] ACPI: Dynamic OEM Table Load:
[    0.182220] ACPI: SSDT 0xFFFF9A182BCDF000 000D14 (v02 PmRef  ApIst    00003000 INTL 20160422)
[    0.182766] ACPI: Executed 1 blocks of module-level executable AML code
[    0.182897] ACPI: Dynamic OEM Table Load:
[    0.182900] ACPI: SSDT 0xFFFF9A182BEAD000 00030A (v02 PmRef  ApCst    00003000 INTL 20160422)
[    0.183076] ACPI: Executed 1 blocks of module-level executable AML code
[    0.184262] ACPI : EC: EC started
[    0.184263] ACPI : EC: interrupt blocked
[    0.184279] ACPI: \_SB_.PCI0.LPCB.H_EC: Used as first EC
[    0.184281] ACPI: \_SB_.PCI0.LPCB.H_EC: GPE=0x14, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.184282] ACPI: \_SB_.PCI0.LPCB.H_EC: Used as boot DSDT EC to handle transactions
[    0.184282] ACPI: Interpreter enabled
[    0.184316] ACPI: (supports S0 S3 S4 S5)
[    0.184317] ACPI: Using IOAPIC for interrupt routing
[    0.184345] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.199860] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.199864] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.199983] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME AER]
[    0.200093] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability]
[    0.200094] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.200657] PCI host bridge to bus 0000:00
[    0.200659] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.200660] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.200660] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.200661] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window]
[    0.200662] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[    0.200663] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.200670] pci 0000:00:00.0: [8086:5904] type 00 class 0x060000
[    0.200928] pci 0000:00:02.0: [8086:5927] type 00 class 0x030000
[    0.200936] pci 0000:00:02.0: reg 0x10: [mem 0xdb000000-0xdbffffff 64bit]
[    0.200941] pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref]
[    0.200945] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.201072] pci 0000:00:08.0: [8086:1911] type 00 class 0x088000
[    0.201082] pci 0000:00:08.0: reg 0x10: [mem 0xdc24f000-0xdc24ffff 64bit]
[    0.201216] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
[    0.201232] pci 0000:00:14.0: reg 0x10: [mem 0xdc230000-0xdc23ffff 64bit]
[    0.201293] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.201429] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.201459] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
[    0.201475] pci 0000:00:14.2: reg 0x10: [mem 0xdc24e000-0xdc24efff 64bit]
[    0.201626] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
[    0.201646] pci 0000:00:16.0: reg 0x10: [mem 0xdc24d000-0xdc24dfff 64bit]
[    0.201716] pci 0000:00:16.0: PME# supported from D3hot
[    0.201866] pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601
[    0.201880] pci 0000:00:17.0: reg 0x10: [mem 0xdc248000-0xdc249fff]
[    0.201886] pci 0000:00:17.0: reg 0x14: [mem 0xdc24c000-0xdc24c0ff]
[    0.201893] pci 0000:00:17.0: reg 0x18: [io  0xf090-0xf097]
[    0.201900] pci 0000:00:17.0: reg 0x1c: [io  0xf080-0xf083]
[    0.201907] pci 0000:00:17.0: reg 0x20: [io  0xf060-0xf07f]
[    0.201914] pci 0000:00:17.0: reg 0x24: [mem 0xdc24b000-0xdc24b7ff]
[    0.201951] pci 0000:00:17.0: PME# supported from D3hot
[    0.202072] pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400
[    0.202132] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.202242] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.202281] pci 0000:00:1c.5: [8086:9d15] type 01 class 0x060400
[    0.202335] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.202442] pci 0000:00:1c.5: System wakeup disabled by ACPI
[    0.202470] pci 0000:00:1c.7: [8086:9d17] type 01 class 0x060400
[    0.202524] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[    0.202630] pci 0000:00:1c.7: System wakeup disabled by ACPI
[    0.202668] pci 0000:00:1f.0: [8086:9d4e] type 00 class 0x060100
[    0.202868] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
[    0.202879] pci 0000:00:1f.2: reg 0x10: [mem 0xdc244000-0xdc247fff]
[    0.203031] pci 0000:00:1f.3: [8086:9d71] type 00 class 0x040380
[    0.203054] pci 0000:00:1f.3: reg 0x10: [mem 0xdc240000-0xdc243fff 64bit]
[    0.203085] pci 0000:00:1f.3: reg 0x20: [mem 0xdc220000-0xdc22ffff 64bit]
[    0.203132] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.203292] pci 0000:00:1f.3: System wakeup disabled by ACPI
[    0.203324] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
[    0.203370] pci 0000:00:1f.4: reg 0x10: [mem 0xdc24a000-0xdc24a0ff 64bit]
[    0.203439] pci 0000:00:1f.4: reg 0x20: [io  0xf040-0xf05f]
[    0.203618] pci 0000:00:1f.6: [8086:15d8] type 00 class 0x020000
[    0.203636] pci 0000:00:1f.6: reg 0x10: [mem 0xdc200000-0xdc21ffff]
[    0.203725] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[    0.203813] pci 0000:00:1f.6: System wakeup disabled by ACPI
[    0.203875] pci 0000:00:1c.0: PCI bridge to [bus 01-39]
[    0.203879] pci 0000:00:1c.0:   bridge window [mem 0xc4000000-0xda0fffff]
[    0.203883] pci 0000:00:1c.0:   bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[    0.204212] pci 0000:3a:00.0: [8086:24fd] type 00 class 0x028000
[    0.204289] pci 0000:3a:00.0: reg 0x10: [mem 0xdc100000-0xdc101fff 64bit]
[    0.204588] pci 0000:3a:00.0: PME# supported from D0 D3hot D3cold
[    0.204746] pci 0000:3a:00.0: System wakeup disabled by ACPI
[    0.216940] pci 0000:00:1c.5: PCI bridge to [bus 3a]
[    0.216943] pci 0000:00:1c.5:   bridge window [mem 0xdc100000-0xdc1fffff]
[    0.217042] pci 0000:3b:00.0: [10ec:5229] type 00 class 0xff0000
[    0.217061] pci 0000:3b:00.0: reg 0x10: [mem 0xdc000000-0xdc000fff]
[    0.217168] pci 0000:3b:00.0: supports D1 D2
[    0.217169] pci 0000:3b:00.0: PME# supported from D1 D2 D3hot
[    0.217213] pci 0000:3b:00.0: System wakeup disabled by ACPI
[    0.228453] pci 0000:00:1c.7: PCI bridge to [bus 3b]
[    0.228457] pci 0000:00:1c.7:   bridge window [mem 0xdc000000-0xdc0fffff]
[    0.229479] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.229519] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.229557] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.229595] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.229634] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.229672] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.229710] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.229747] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.230062] ACPI: Enabled 5 GPEs in block 00 to 7F
[    0.230106] ACPI : EC: interrupt unblocked
[    0.230117] ACPI : EC: event unblocked
[    0.230127] ACPI: \_SB_.PCI0.LPCB.H_EC: GPE=0x14, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.230128] ACPI: \_SB_.PCI0.LPCB.H_EC: Used as boot DSDT EC to handle transactions and events
[    0.230190] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.230191] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.230193] vgaarb: loaded
[    0.230193] vgaarb: bridge control possible 0000:00:02.0
[    0.230218] Registered efivars operations
[    0.249567] PCI: Using ACPI for IRQ routing
[    0.272972] PCI: pci_cache_line_size set to 64 bytes
[    0.273504] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.273504] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.273505] e820: reserve RAM buffer [mem 0x70e06000-0x73ffffff]
[    0.273506] e820: reserve RAM buffer [mem 0x7a247000-0x7bffffff]
[    0.273507] e820: reserve RAM buffer [mem 0x7afff000-0x7bffffff]
[    0.273507] e820: reserve RAM buffer [mem 0x47f000000-0x47fffffff]
[    0.273639] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.273643] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    0.275681] clocksource: Switched to clocksource hpet
[    0.280556] VFS: Disk quotas dquot_6.6.0
[    0.280576] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.280631] pnp: PnP ACPI init
[    0.280913] system 00:00: [io  0x0a00-0x0a1f] has been reserved
[    0.280914] system 00:00: [io  0x0a20-0x0a2f] has been reserved
[    0.280915] system 00:00: [io  0x0a30-0x0a3f] has been reserved
[    0.280916] system 00:00: [io  0x0a40-0x0a4f] has been reserved
[    0.280917] system 00:00: [io  0x0a50-0x0a5f] has been reserved
[    0.280918] system 00:00: [io  0x0a60-0x0a6f] has been reserved
[    0.280920] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.281100] pnp 00:01: [dma 0 disabled]
[    0.281127] pnp 00:01: Plug and Play ACPI device, IDs ITE8708 (active)
[    0.281229] system 00:02: [io  0x0680-0x069f] has been reserved
[    0.281230] system 00:02: [io  0xffff] has been reserved
[    0.281231] system 00:02: [io  0xffff] has been reserved
[    0.281232] system 00:02: [io  0xffff] has been reserved
[    0.281233] system 00:02: [io  0x1800-0x18fe] has been reserved
[    0.281234] system 00:02: [io  0x164e-0x164f] has been reserved
[    0.281235] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.281310] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.281336] system 00:04: [io  0x1854-0x1857] has been reserved
[    0.281338] system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.281514] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.281515] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.281516] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.281517] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[    0.281518] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.281519] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.281520] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.281522] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[    0.281523] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.281524] system 00:05: [mem 0xdffe0000-0xdfffffff] has been reserved
[    0.281525] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.281555] system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved
[    0.281556] system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved
[    0.281557] system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved
[    0.281558] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    0.281559] system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved
[    0.281560] system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved
[    0.281561] system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved
[    0.281562] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.281781] system 00:07: [io  0xff00-0xfffe] has been reserved
[    0.281783] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.282643] system 00:08: [mem 0xfe029000-0xfe029fff] has been reserved
[    0.282644] system 00:08: [mem 0xfe028000-0xfe028fff] has been reserved
[    0.282645] system 00:08: [mem 0xfdaf0000-0xfdafffff] has been reserved
[    0.282646] system 00:08: [mem 0xfdae0000-0xfdaeffff] has been reserved
[    0.282647] system 00:08: [mem 0xfdac0000-0xfdacffff] has been reserved
[    0.282649] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.283300] pnp: PnP ACPI: found 9 devices
[    0.289969] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.289978] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 01-39] add_size 1000
[    0.289990] pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.289991] pci 0000:00:1c.0: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.289993] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
[    0.289994] pci 0000:00:1c.0: PCI bridge to [bus 01-39]
[    0.289996] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.289999] pci 0000:00:1c.0:   bridge window [mem 0xc4000000-0xda0fffff]
[    0.290002] pci 0000:00:1c.0:   bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[    0.290005] pci 0000:00:1c.5: PCI bridge to [bus 3a]
[    0.290008] pci 0000:00:1c.5:   bridge window [mem 0xdc100000-0xdc1fffff]
[    0.290013] pci 0000:00:1c.7: PCI bridge to [bus 3b]
[    0.290016] pci 0000:00:1c.7:   bridge window [mem 0xdc000000-0xdc0fffff]
[    0.290021] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.290022] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.290023] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.290024] pci_bus 0000:00: resource 7 [mem 0x80000000-0xdfffffff window]
[    0.290025] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
[    0.290025] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    0.290026] pci_bus 0000:01: resource 1 [mem 0xc4000000-0xda0fffff]
[    0.290027] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xc1ffffff 64bit pref]
[    0.290028] pci_bus 0000:3a: resource 1 [mem 0xdc100000-0xdc1fffff]
[    0.290029] pci_bus 0000:3b: resource 1 [mem 0xdc000000-0xdc0fffff]
[    0.290164] NET: Registered protocol family 2
[    0.290316] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.290520] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.290745] TCP: Hash tables configured (established 131072 bind 65536)
[    0.290767] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.290824] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.290904] NET: Registered protocol family 1
[    0.290914] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.291360] PCI: CLS 64 bytes, default 64
[    0.291388] Unpacking initramfs...
[    0.525243] Freeing initrd memory: 19136K
[    0.525296] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.525320] software IO TLB [mem 0x71bcf000-0x75bcf000] (64MB) mapped at [ffff9a1431bcf000-ffff9a1435bcefff]
[    0.525596] audit: initializing netlink subsys (disabled)
[    0.525612] audit: type=2000 audit(1541152266.520:1): initialized
[    0.525994] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[    0.526063] zbud: loaded
[    0.527126] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.527177] io scheduler noop registered
[    0.527177] io scheduler deadline registered
[    0.527188] io scheduler cfq registered (default)
[    0.527614] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.527617] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.527626] efifb: probing for efifb
[    0.527635] efifb: framebuffer at 0x90000000, using 8128k, total 8128k
[    0.527636] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[    0.527636] efifb: scrolling: redraw
[    0.527637] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.530444] Console: switching to colour frame buffer device 240x67
[    0.533166] fb0: EFI VGA frame buffer device
[    0.533171] intel_idle: MWAIT substates: 0x11142120
[    0.533171] intel_idle: v0.4.1 model 0x8E
[    0.533321] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.533425] GHES: HEST is not enabled!
[    0.533481] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.533921] Linux agpgart interface v0.103
[    0.533974] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    0.533974] AMD IOMMUv2 functionality not available on this system
[    0.534216] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    1.539750] tsc: Refined TSC clocksource calibration: 3504.011 MHz
[    1.539756] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x32821e21aef, max_idle_ns: 440795263631 ns
[    1.616123] i8042: No controller found
[    1.616247] mousedev: PS/2 mouse device common for all mice
[    1.616270] rtc_cmos 00:03: RTC can wake from S4
[    1.616675] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    1.616758] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.616763] intel_pstate: Intel P-state driver initializing
[    1.617060] intel_pstate: HWP enabled
[    1.617157] ledtrig-cpu: registered to indicate activity on CPUs
[    1.617539] NET: Registered protocol family 10
[    1.617751] mip6: Mobile IPv6
[    1.617752] NET: Registered protocol family 17
[    1.617754] mpls_gso: MPLS GSO support
[    1.617932] microcode: sig=0x806e9, pf=0x40, revision=0x84
[    1.618005] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.618087] registered taskstats version 1
[    1.618094] zswap: loaded using pool lzo/zbud
[    1.618221] ima: No TPM chip found, activating TPM-bypass!
[    1.618221] ima: Allocated hash algorithm: sha256
[    1.619154] rtc_cmos 00:03: setting system clock to 2018-11-02 09:51:08 UTC (1541152268)
[    1.619188] PM: Hibernation image not present or could not be loaded.
[    1.784644] Freeing unused kernel memory: 1420K
[    1.784644] Write protecting the kernel read-only data: 12288k
[    1.785596] Freeing unused kernel memory: 1920K
[    1.786931] Freeing unused kernel memory: 1224K
[    1.789474] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.797661] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.797704] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.797710] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.821378] thermal LNXTHERM:00: registered as thermal_zone0
[    1.821379] ACPI: Thermal Zone [TZ0] (-263 C)
[    1.831619] ACPI: bus type USB registered
[    1.831645] usbcore: registered new interface driver usbfs
[    1.831656] usbcore: registered new interface driver hub
[    1.831677] usbcore: registered new device driver usb
[    1.831768] SCSI subsystem initialized
[    1.832114] rtsx_pci 0000:3b:00.0: enabling device (0000 -> 0002)
[    1.832317] rtsx_pci 0000:3b:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 122
[    1.832913] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.832917] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    1.833992] pps_core: LinuxPPS API ver. 1 registered
[    1.833993] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.834042] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
[    1.834047] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.834153] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.834155] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.834156] usb usb1: Product: xHCI Host Controller
[    1.834156] PTP clock support registered
[    1.834157] usb usb1: Manufacturer: Linux 4.9.0-8-amd64 xhci-hcd
[    1.834161] usb usb1: SerialNumber: 0000:00:14.0
[    1.834301] hub 1-0:1.0: USB hub found
[    1.834319] hub 1-0:1.0: 12 ports detected
[    1.835047] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    1.835048] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    1.835189] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.835192] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.835222] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    1.835223] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.835224] usb usb2: Product: xHCI Host Controller
[    1.835225] usb usb2: Manufacturer: Linux 4.9.0-8-amd64 xhci-hcd
[    1.835226] usb usb2: SerialNumber: 0000:00:14.0
[    1.835310] hub 2-0:1.0: USB hub found
[    1.835320] hub 2-0:1.0: 6 ports detected
[    1.835751] usb: port power management may be unreliable
[    1.835813] libata version 3.00 loaded.
[    1.836240] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    1.837691] AVX2 version of gcm_enc/dec engaged.
[    1.837692] AES CTR mode by8 optimization enabled
[    2.117668] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
[    2.159949] usb 1-3: new full-speed USB device number 2 using xhci_hcd
[    2.205346] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 94:c6:91:1b:b1:93
[    2.205349] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
[    2.205437] e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF
[    2.205488] ahci 0000:00:17.0: version 3.0
[    2.205894] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x5 impl SATA mode
[    2.205899] ahci 0000:00:17.0: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
[    2.206786] scsi host0: ahci
[    2.206870] e1000e 0000:00:1f.6 eno1: renamed from eth0
[    2.207057] scsi host1: ahci
[    2.207249] scsi host2: ahci
[    2.207340] ata1: SATA max UDMA/133 abar m2048@0xdc24b000 port 0xdc24b100 irq 125
[    2.207341] ata2: DUMMY
[    2.207347] ata3: SATA max UDMA/133 abar m2048@0xdc24b000 port 0xdc24b200 irq 125
[    2.207616] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[    2.207662] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[    2.303133] usb 1-3: New USB device found, idVendor=062a, idProduct=4101
[    2.303136] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.303138] usb 1-3: Product: 2.4G Keyboard Mouse
[    2.303139] usb 1-3: Manufacturer: MOSART Semi.
[    2.306532] hidraw: raw HID events driver (C) Jiri Kosina
[    2.310175] usbcore: registered new interface driver usbhid
[    2.310176] usbhid: USB HID core driver
[    2.311481] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:062A:4101.0001/input/input0
[    2.368182] hid-generic 0003:062A:4101.0001: input,hidraw0: USB HID v1.10 Keyboard [MOSART Semi. 2.4G Keyboard Mouse] on usb-0000:00:14.0-3/input0
[    2.368546] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:062A:4101.0002/input/input1
[    2.423931] usb 1-4: new full-speed USB device number 3 using xhci_hcd
[    2.428213] hid-generic 0003:062A:4101.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [MOSART Semi. 2.4G Keyboard Mouse] on usb-0000:00:14.0-3/input1
[    2.521664] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.521698] ata1: SATA link down (SStatus 4 SControl 300)
[    2.522605] ata3.00: supports DRM functions and may not be fully accessible
[    2.522655] ata3.00: ATA-10: CT500MX500SSD4, M3CR020, max UDMA/133
[    2.522658] ata3.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    2.523230] ata3.00: supports DRM functions and may not be fully accessible
[    2.523619] ata3.00: configured for UDMA/133
[    2.524315] scsi 2:0:0:0: Direct-Access     ATA      CT500MX500SSD4   020  PQ: 0 ANSI: 5
[    2.564118] clocksource: Switched to clocksource tsc
[    2.566586] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    2.566590] sd 2:0:0:0: [sda] 4096-byte physical blocks
[    2.566711] sd 2:0:0:0: [sda] Write Protect is off
[    2.566715] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.566752] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.568287]  sda: sda1 sda2 sda3
[    2.568795] sd 2:0:0:0: [sda] Attached SCSI disk
[    2.570829] usb 1-4: New USB device found, idVendor=0403, idProduct=6001
[    2.570832] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.570834] usb 1-4: Product: TTL232R-3V3
[    2.570835] usb 1-4: Manufacturer: FTDI
[    2.570837] usb 1-4: SerialNumber: FTF95OL4
[    2.594624] device-mapper: uevent: version 1.0.3
[    2.594685] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[    2.614721] random: fast init done
[    2.678540] PM: Starting manual resume from disk
[    2.678543] PM: Hibernation image partition 254:2 present
[    2.678544] PM: Looking for hibernation image.
[    2.678632] PM: Image not found (code -22)
[    2.678633] PM: Hibernation image not present or could not be loaded.
[    2.691699] usb 1-8: new full-speed USB device number 4 using xhci_hcd
[    2.761467] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[    2.832658] usb 1-8: New USB device found, idVendor=8087, idProduct=0a2b
[    2.832661] usb 1-8: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.875396] ip_tables: (C) 2000-2006 Netfilter Core Team
[    2.933260] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    2.933355] systemd[1]: Detected architecture x86-64.
[    2.933485] systemd[1]: Set hostname to <pochet-nuc1>.
[    2.991636] systemd[1]: Listening on LVM2 poll daemon socket.
[    2.991698] systemd[1]: Listening on Journal Socket.
[    2.991716] systemd[1]: Listening on LVM2 metadata daemon socket.
[    2.991755] systemd[1]: Listening on Journal Audit Socket.
[    2.991776] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    2.991799] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    2.991816] systemd[1]: Listening on udev Kernel Socket.
[    3.009971] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[    3.026482] lp: driver loaded but no devices found
[    3.029593] ppdev: user-space parallel port driver
[    3.106816] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    3.106820] ACPI: Sleep Button [SLPB]
[    3.135902] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[    3.135904] ACPI: Power Button [PWRB]
[    3.135958] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[    3.135959] ACPI: Power Button [PWRF]
[    3.166061] ite_cir: Auto-detected model: ITE8708 CIR transceiver
[    3.166062] ite_cir: Using model: ITE8708 CIR transceiver
[    3.166062] ite_cir: TX-capable: 1
[    3.166063] ite_cir: Sample period (ns): 8680
[    3.166063] ite_cir: TX carrier frequency (Hz): 38000
[    3.166064] ite_cir: TX duty cycle (%): 33
[    3.166064] ite_cir: RX low carrier frequency (Hz): 0
[    3.166065] ite_cir: RX high carrier frequency (Hz): 0
[    3.166328] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    3.167582] sd 2:0:0:0: Attached scsi generic sg0 type 0
[    3.171680] [drm] Initialized
[    3.171786] wmi: Mapper loaded
[    3.172678] mei_me 0000:00:16.0: enabling device (0004 -> 0006)
[    3.174728] Bluetooth: Core ver 2.22
[    3.174735] usbcore: registered new interface driver usbserial
[    3.174738] NET: Registered protocol family 31
[    3.174738] Bluetooth: HCI device and connection manager initialized
[    3.174741] Bluetooth: HCI socket layer initialized
[    3.174742] usbcore: registered new interface driver usbserial_generic
[    3.174743] Bluetooth: L2CAP socket layer initialized
[    3.174747] Bluetooth: SCO socket layer initialized
[    3.174748] usbserial: USB Serial support registered for generic
[    3.177688] usbcore: registered new interface driver ftdi_sio
[    3.177697] usbserial: USB Serial support registered for FTDI USB Serial Device
[    3.177723] ftdi_sio 1-4:1.0: FTDI USB Serial Device converter detected
[    3.177742] usb 1-4: Detected FT232RL
[    3.177869] usb 1-4: FTDI USB Serial Device converter now attached to ttyUSB0
[    3.182518] iTCO_vendor_support: vendor-support=0
[    3.184230] input: PC Speaker as /devices/platform/pcspkr/input/input6
[    3.184878] EFI Variables Facility v0.08 2004-May-17
[    3.185915] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    3.186109] iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[    3.189430] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    3.193185] Intel(R) Wireless WiFi driver for Linux
[    3.193186] Copyright(c) 2003- 2015 Intel Corporation
[    3.193521] iwlwifi 0000:3a:00.0: enabling device (0000 -> 0002)
[    3.197198] usbcore: registered new interface driver btusb
[    3.200339] Registered IR keymap rc-rc6-mce
[    3.200570] input: ITE8708 CIR transceiver as /devices/virtual/rc/rc0/input5
[    3.200866] rc rc0: ITE8708 CIR transceiver as /devices/virtual/rc/rc0
[    3.201427] iwlwifi 0000:3a:00.0: firmware: failed to load iwlwifi-8265-26.ucode (-2)
[    3.201458] iwlwifi 0000:3a:00.0: Direct firmware load for iwlwifi-8265-26.ucode failed with error -2
[    3.201467] iwlwifi 0000:3a:00.0: firmware: failed to load iwlwifi-8265-25.ucode (-2)
[    3.201655] iwlwifi 0000:3a:00.0: Direct firmware load for iwlwifi-8265-25.ucode failed with error -2
[    3.201661] iwlwifi 0000:3a:00.0: firmware: failed to load iwlwifi-8265-24.ucode (-2)
[    3.201686] iwlwifi 0000:3a:00.0: Direct firmware load for iwlwifi-8265-24.ucode failed with error -2
[    3.201693] iwlwifi 0000:3a:00.0: firmware: failed to load iwlwifi-8265-23.ucode (-2)
[    3.201878] iwlwifi 0000:3a:00.0: Direct firmware load for iwlwifi-8265-23.ucode failed with error -2
[    3.201885] iwlwifi 0000:3a:00.0: firmware: failed to load iwlwifi-8265-22.ucode (-2)
[    3.202073] iwlwifi 0000:3a:00.0: Direct firmware load for iwlwifi-8265-22.ucode failed with error -2
[    3.204677] Bluetooth: hci0: Bootloader revision 0.0 build 26 week 38 2015
[    3.205684] Bluetooth: hci0: Device revision is 16
[    3.205685] Bluetooth: hci0: Secure boot is enabled
[    3.205685] Bluetooth: hci0: OTP lock is enabled
[    3.205686] Bluetooth: hci0: API lock is enabled
[    3.205686] Bluetooth: hci0: Debug lock is disabled
[    3.205687] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[    3.205700] bluetooth hci0: firmware: failed to load intel/ibt-12-16.sfi (-2)
[    3.205729] bluetooth hci0: Direct firmware load for intel/ibt-12-16.sfi failed with error -2
[    3.205731] Bluetooth: hci0: Failed to load Intel firmware file (-2)
[    3.207380] lirc_dev: IR Remote Control driver registered, major 245
[    3.208038] IR LIRC bridge handler initialized
[    3.209797] rc rc0: lirc_dev: driver ir-lirc-codec (ite-cir) registered at minor = 0
[    3.213199] IR RC6 protocol handler initialized
[    3.214859] [drm] Found 64MB of eDRAM
[    3.215369] [drm] Memory usable by graphics device = 4096M
[    3.215375] checking generic (90000000 7f0000) vs hw (90000000 10000000)
[    3.215375] fb: switching to inteldrmfb from EFI VGA
[    3.215565] Console: switching to colour dummy device 80x25
[    3.216116] [drm] Replacing VGA console driver
[    3.223965] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    3.223966] [drm] Driver supports precise vblank timestamp query.
[    3.231297] i915 0000:00:02.0: firmware: failed to load i915/kbl_dmc_ver1_01.bin (-2)
[    3.231302] i915 0000:00:02.0: Direct firmware load for i915/kbl_dmc_ver1_01.bin failed with error -2
[    3.231304] i915 0000:00:02.0: Failed to load DMC firmware [https://01.org/linuxgraphics/intel-linux-graphics-firmwares], disabling runtime power management.
[    3.232558] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    3.239728] ite_cir: driver has been successfully loaded
[    3.241830] intel_rapl: Found RAPL domain package
[    3.241831] intel_rapl: Found RAPL domain core
[    3.241832] intel_rapl: Found RAPL domain uncore
[    3.241834] intel_rapl: Found RAPL domain dram
[    3.243007] pstore: using zlib compression
[    3.243020] pstore: Registered efi as persistent store backend
[    3.285637] Adding 16662524k swap on /dev/mapper/pochet--nuc1--vg-swap_1.  Priority:-1 extents:1 across:16662524k SSFS
[    3.321467] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem
[    3.326383] EXT4-fs (sda2): mounted filesystem without journal. Opts: (null)
[    3.328226] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
[    3.336785] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[    3.343732] systemd-journald[250]: Received request to flush runtime journal from PID 1
[    3.374570] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
[    3.503469] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    3.503470] Bluetooth: BNEP filters: protocol multicast
[    3.503473] Bluetooth: BNEP socket layer initialized
[    3.517113] [drm] failed to retrieve link info, disabling eDP
[    3.518068] [drm] GuC firmware load skipped
[    3.820218] random: crng init done
[    3.820221] random: 7 urandom warning(s) missed due to ratelimiting
[    3.827777] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    3.828550] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[    3.832492] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    3.832504] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
[    3.890802] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[    4.089144] fbcon: inteldrmfb (fb0) is primary device
[    4.099985] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[    4.451278] Console: switching to colour frame buffer device 240x67
[    4.471128] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    4.509866] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC283: line_outs=1 (0x21/0x0/0x0/0x0/0x0) type:hp
[    4.509867] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    4.509868] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    4.509868] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    4.509869] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    4.509870] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x12
[    4.560339] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
[    4.560928] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
[    4.561198] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
[    4.561249] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
[    4.836062] [drm] RC6 on
[    7.030120] e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[    7.030172] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
[   12.511513] aufs: loading out-of-tree module taints kernel.
[   12.513711] aufs 4.9-20161219
[   12.780492] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[   12.781068] Bridge firewalling registered
[   12.785272] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[   12.866316] Initializing XFRM netlink socket
[   12.876034] Netfilter messages via NETLINK v0.30.
[   12.877085] ctnetlink v0.93: registering with nfnetlink.
[   12.913731] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
[   24.519436] vboxdrv: Found 4 processor cores
[   24.536158] vboxdrv: TSC mode is Invariant, tentative frequency 3503971372 Hz
[   24.536158] vboxdrv: Successfully loaded version 5.2.12 (interface 0x00290001)
[   24.744211] VBoxNetFlt: Successfully started.
[   24.747739] VBoxNetAdp: Successfully started.
[   24.751492] VBoxPciLinuxInit
[   24.753708] vboxpci: IOMMU not found (not registered)
 



alsa-info
http://www.alsa-project.org/db/?f=d99e5 … a6753af5b7

Auriez-vous une piste?

Cordialement,

Dernière modification par rpochet (04-11-2018 11:07:37)

Hors ligne

#2 02-11-2018 14:02:34

empanada
Membre
Distrib. : Debian 11 (Bullseye)
Noyau : 5.10.0-13-amd64
(G)UI : LXDE
Inscription : 19-09-2018

Re : [Résolu] Plus de carte son dans Parametres > son

rpochet a écrit :

00:1f.3 Audio device: Intel Corporation Device 9d71 (rev 21) (prog-if 80)
  Subsystem: Intel Corporation Device 2068
  Flags: bus master, fast devsel, latency 32, IRQ 128
  Memory at dc240000 (64-bit, non-prefetchable) [size=16K]
  Memory at dc220000 (64-bit, non-prefetchable) [size=64K]
  Capabilities: <access denied>
  Kernel driver in use: snd_hda_intel
  Kernel modules: snd_hda_intel, snd_soc_skl



Par l'instant non, mais mieux faire le lspci -v comme root. Comme utilisateur

Capabilities: <access denied>


"blues are the roots and the other musics are the fruits" . Willie Dixon

Hors ligne

#3 03-11-2018 08:26:17

rpochet
Membre
Distrib. : Debian 11.7 Bullseye
Noyau : Linux 4.19.0-25-rt-amd64
Inscription : 02-11-2018

Re : [Résolu] Plus de carte son dans Parametres > son

Bonjour,

Voici le résultat de la commande en root:

lspci -v



00:1f.3 Audio device: Intel Corporation Device 9d71 (rev 21) (prog-if 80)
  Subsystem: Intel Corporation Device 2068
  Flags: bus master, fast devsel, latency 32, IRQ 128
  Memory at dc240000 (64-bit, non-prefetchable) [size=16K]
  Memory at dc220000 (64-bit, non-prefetchable) [size=64K]
  Capabilities: [50] Power Management version 3
  Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
  Kernel driver in use: snd_hda_intel
  Kernel modules: snd_hda_intel, snd_soc_skl
 

Hors ligne

#4 03-11-2018 15:20:52

empanada
Membre
Distrib. : Debian 11 (Bullseye)
Noyau : 5.10.0-13-amd64
(G)UI : LXDE
Inscription : 19-09-2018

Re : [Résolu] Plus de carte son dans Parametres > son

Dans l'info que t'as mis, je ne vois pas de problèmes sauf le 

$ pulseaudio --start
E: [pulseaudio] main.c: Échec lors du démarrage du démon.



T'as plusieurs utilisateurs? Le son à disparu pour tous eux?
T'as essayé une seule sortie audio où toutes (haut-parleurs intégrés(s'il y en a), jack, HDMI...)

Je suppose que t'as vérifié si c'est un problème exclusive de pulseaudio ou de les pilotes, par exemple en spécifiant aux logiciels(smplayer, vlc...) la sortie alsa au lieu de pulseaudio.
Sinon, essayer.
Essayer aussi

aplay nom_fichier

.
Peut-être vérifier qu'il n'y a pas quelque mute caché... Dans l'info alsa j'ai vu tout normale, mais "graphique" on voit mieux.

En faisant des recherches avec "Intel nuc" etc/ou le modèle de carte son, le plus souvent rencontré sont des problèmes lors de la mise à jour du noyau...mais ça n'est pas la seule cause d'échec de le serveur pulseadio. Quad même, le problème a put coïncider avec une mise à jour(soit du noyau ou non)? Si oui, as-tu des autres noyaux pour essayer avec? (sinon tu peut installer le noyau sur stretch-backports).

Désolé de ne pas te donner des pistes plus concrets...ça fait longtemps que le support audio c'est très bon. Il fait 10 années ou plus faire fonctionner l'audio pourrait être un vrai cauchemar...mais ces problèmes maintenant sont de plus en plus rares.

Salut

Dernière modification par empanada (03-11-2018 15:23:15)


"blues are the roots and the other musics are the fruits" . Willie Dixon

Hors ligne

#5 04-11-2018 10:29:02

rpochet
Membre
Distrib. : Debian 11.7 Bullseye
Noyau : Linux 4.19.0-25-rt-amd64
Inscription : 02-11-2018

Re : [Résolu] Plus de carte son dans Parametres > son

Bonjour,

La commande suivante indiauqit un mauvais device (hw:1,0 au lieu de hw:0,0, je n'ai qu'une carte son).

pulseaudio



E: [pulseaudio] module.c: Failed to load module "module-alsa-source" (argument: "device=hw:1,0"): initialization failed.
E: [pulseaudio] main.c: Module load failed.
E: [pulseaudio] main.c: Échec lors de l'initialisation du démon
 



J'ai donc changer cette valeur dans le fichier /etc/pulse/default.pa, mais même erreur.

load-module module-alsa-source device=hw:0,0
 



En cherchant plus, j'ai trouve le cas d'un fichier /etc/pulse/default.pa sans load-module module-alsa-source, j'ai donc supprimer cette ligne et magie, la carte apparaît et le son fonctionne.
file-R437b0adf0401b6a36ad57d4eeaf34398

Sachant que la carte fonctionnait avant,je suppose qu'une mise a jour doit être la cause du problème.

Merci pour votre aide,

A bientot,

Romuald

Dernière modification par rpochet (04-11-2018 10:31:31)

Hors ligne

#6 04-11-2018 11:02:40

empanada
Membre
Distrib. : Debian 11 (Bullseye)
Noyau : 5.10.0-13-amd64
(G)UI : LXDE
Inscription : 19-09-2018

Re : [Résolu] Plus de carte son dans Parametres > son

rpochet a écrit :

En cherchant plus, j'ai trouve le cas d'un fichier /etc/pulse/default.pa sans load-module module-alsa-source, j'ai donc supprimer cette ligne et magie, la carte apparaît et le son fonctionne.


C'est dit dans le propre fichier:

### Load audio drivers statically
### (it's probably better to not load these drivers manually, but instead
### use module-udev-detect -- see below -- for doing this automatically)
#load-module module-alsa-sink
#load-module module-alsa-source device=hw:1,0
#load-module module-oss device="/dev/dsp" sink_name=output source_name=input
#load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input
#load-module module-null-sink
#load-module module-pipe-sink



(it's probably better to not load these drivers manually, but instead use module-udev-detect -- see below -- for doing this automatically)

Il manque à signaler le problème [RÉSOLU] : https://debian-facile.org/atelier:resolu

Salut


"blues are the roots and the other musics are the fruits" . Willie Dixon

Hors ligne

Pied de page des forums