Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#1 08-12-2018 17:37:55

Anonyme-11
Invité

[résolu]Fujitsu T730 avec carte sim et écran tactile

Concernant la 3G, la reponse se trouve ici arrow.gifarrow.gifarrow.gif https://framasphere.org/people/33bab840 … 0000053625 (Merci a deuchdeb et a Johan Ryberg)
Pour le tactile :

apt-get install xinput inputattach
inputattach --w8001 /dev/ttyS0 &


Merci a tous! smile

kernal_panic.gifkernal_panic.gifkernal_panic.gifDébut du sujet  kernal_panic.gifkernal_panic.gifkernal_panic.gif

Bonjour,
J'ai fait l'acquisition d'un ordinateur Fujitsu lifebook t series T730.
Une sorte de pc/tablette.
Il était vendu avec une version non enregistré de windows vista que j'ai naturellement dégagé pour installer Debian 9.

1 - Il dispose d'un lecteur de carte sim, j'aimerais savoir si quelqu'un connaît une solution afin de pouvoir l'exploiter et bénéficier du réseau 3G .
2 - Il dispose aussi d'un écran tactile "penabled wacom" dont j'ignore le fonctionnement.

Je ne suis pas super emballé par le tactile, mais j'avoue que la 3G m’intéresse.

Merci d'avance pour toute aide ou information.


418C43ZwFSL._SY355_.jpg


Pour la 3G :

Avant tout, quelques liens!
Visiblement le modem 3G de mon ordinateur : http://www.thinkwiki.org/wiki/Qualcomm_Gobi_2000
La notice : http://solutions.us.fujitsu.com/www/con … t_notices/
Le site de support : http://www.fujitsupc.com/www/content/pd … NZ0-00.pdf
Un lien anglais que je vais exploiter : https://bugs.launchpad.net/ubuntu/+bug/554099

lsusb


Bus 002 Device 005: ID 1690:0741 Askey Computer Corp. [hex]
Bus 002 Device 004: ID 04f2:b169 Chicony Electronics Co., Ltd
Bus 002 Device 003: ID 08ff:2550 AuthenTec, Inc. AES2550 Fingerprint Sensor
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 1199:9000 Sierra Wireless, Inc. Gobi 2000 Wireless Modem (QDL mode)
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub





Pour le tactile :

https://github.com/linuxwacom/input-wac … Device-IDs
Un tableau qui regroupe les periphériques wacom et la version de linux requise.
J'ai retenu cette ligne qui concerne le model le plus proche de mon pc :

ID     Model Number(s)     Model Name(s)     Note     Linux     input-wacom     libwacom
056a:010e                                   Fujitsu T732                       3.12      2.6.38               0.25



Ils parlent de "input-wacom" et "libwacom".
Apparement, je dispose des deux sur cet ordinateur.
Synaptic m'indique que les versions dont je disposent sont antérieurs a celles nécessaires.

Est ce qu'une migration vers buster réglerai ce problème?
visiblement buster supporte libwacom 0.32-1 contre 0.22-1 .

Est ce que cela signifie qu'en passant par buster je pourrais régler le problème?

Dernière modification par Anonyme-11 (13-04-2019 09:29:04)

#2 08-12-2018 18:32:44

deuchdeb
Moderato ma non troppo
Lieu : Ca bouge Ca bouge!!!
Distrib. : Debian 10 Buster KDE DFlinux et LinuxMintCinnamon
Noyau : Noyau stable
(G)UI : KDE Plasma 5.14, Xfce et Cinnamon
Inscription : 13-01-2010
Site Web

Re : [résolu]Fujitsu T730 avec carte sim et écran tactile

il y a un tuto pour ubuntu mais ça doit se transposer à Debian: https://securit.se/2012/03/guide-sa-har … ntu-12-04/

Une fleur, c'est magique non? smile
Association Debian Facile

Hors ligne

#3 08-12-2018 18:52:40

Anonyme-11
Invité

Re : [résolu]Fujitsu T730 avec carte sim et écran tactile

deuchdeb a écrit :

il y a un tuto pour ubuntu mais ça doit se transposer à Debian: https://securit.se/2012/03/guide-sa-har … ntu-12-04/



Chouette! merci :* je vais voir cela tout de suite!

#4 08-12-2018 20:25:14

Anonyme-11
Invité

Re : [résolu]Fujitsu T730 avec carte sim et écran tactile

Génial! ça marche a merveille une fois que c'est bien paramètre! big_smile
Plus qu'a voir pour les appels et sms si il y a moyen de faire quelque chose! tongue
Je vais chercher un peu.
Et j'ai plus de débit que sur ma ligne fixe! big_smile
Merci pour ton lien!
Je vais le traduire pour qu'il soit un peu plus accessible! tongue

Je suis toujours preneur si quelqu'un sait comment utiliser le tactile. smile

#5 07-04-2019 17:55:22

Anonyme-11
Invité

Re : [résolu]Fujitsu T730 avec carte sim et écran tactile

Bonjour,
je reviens a la charge car je n'ai toujours pas trouver de solution pour l’écran tactile.
Je sais que c'est un ecran wacom, mais cela ne m'a pas aidé.
sur synaptic, j'ai trouvé un pilote lié a xorg mais bien qu'il soit installé, je n'ai aucun résultat (xserver-xorg-input-wacom).
De plus, il semble plus lié aux tablettes graphiques.

lspci


00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02)
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02)
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
00:19.0 Ethernet controller: Intel Corporation 82577LM Gigabit Network Connection (rev 05)
00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 (rev 05)
00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05)
00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5)
00:1f.0 ISA bridge: Intel Corporation QM57 Chipset LPC Interface Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05)
00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05)
10:00.0 Network controller: Intel Corporation Centrino Advanced-N 6200 (rev 35)
48:03.0 CardBus bridge: O2 Micro, Inc. Cardbus bridge (rev 01)
48:03.2 SD Host controller: O2 Micro, Inc. Integrated MMC/SD Controller (rev 02)
48:03.3 Mass storage controller: O2 Micro, Inc. Integrated MS/xD Controller (rev 02)
48:03.4 FireWire (IEEE 1394): O2 Micro, Inc. Firewire (IEEE 1394) (rev 07)
ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02)
ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02)
ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02)
ff:02.1 Host bridge: Intel Corporation 1st Generation Core i3/5/7 Processor QPI Physical 0 (rev 02)
ff:02.2 Host bridge: Intel Corporation 1st Generation Core i3/5/7 Processor Reserved (rev 02)
ff:02.3 Host bridge: Intel Corporation 1st Generation Core i3/5/7 Processor Reserved (rev 02)
 


dmesg


[    0.000000] Linux version 4.9.0-8-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1) ) #1 SMP Debian 4.9.144-3.1 (2019-02-19)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-8-amd64 root=UUID=ef5cbd69-09bc-4199-96a4-0ebe8a25d942 ro quiet
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009bbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009bc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ba962fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000ba963000-0x00000000bac45fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bac46000-0x00000000bb27bfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bb27c000-0x00000000bb281fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bb282000-0x00000000bb3e4fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bb3e5000-0x00000000bb40efff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bb40f000-0x00000000bb650fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bb651000-0x00000000bb652fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bb653000-0x00000000bb6d3fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bb6d4000-0x00000000bb70efff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bb70f000-0x00000000bb716fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bb717000-0x00000000bb71efff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bb71f000-0x00000000bb77efff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bb77f000-0x00000000bb79efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bb79f000-0x00000000bb7dffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bb7e0000-0x00000000bb7fefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bb7ff000-0x00000000bb7fffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bb800000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f2826000-0x00000000f2826fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feaff000-0x00000000feafffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000137ffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: FUJITSU LIFEBOOK T730/FJNB219, BIOS Version 1.06  06/07/2010
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x138000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-D3FFF write-through
[    0.000000]   D4000-DBFFF uncachable
[    0.000000]   DC000-FFFFF write-through
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 disabled
[    0.000000]   1 base 0FFE00000 mask FFFE00000 write-protect
[    0.000000]   2 base 000000000 mask F80000000 write-back
[    0.000000]   3 base 080000000 mask FC0000000 write-back
[    0.000000]   4 base 100000000 mask FC0000000 write-back
[    0.000000]   5 base 138000000 mask FF8000000 uncachable
[    0.000000]   6 base 0BC000000 mask FFC000000 uncachable
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: last_pfn = 0xbb800 max_arch_pfn = 0x400000000
[    0.000000] Base memory trampoline at [ffffa006c0095000] 95000 size 24576
[    0.000000] BRK [0x46734000, 0x46734fff] PGTABLE
[    0.000000] BRK [0x46735000, 0x46735fff] PGTABLE
[    0.000000] BRK [0x46736000, 0x46736fff] PGTABLE
[    0.000000] BRK [0x46737000, 0x46737fff] PGTABLE
[    0.000000] BRK [0x46738000, 0x46738fff] PGTABLE
[    0.000000] BRK [0x46739000, 0x46739fff] PGTABLE
[    0.000000] BRK [0x4673a000, 0x4673afff] PGTABLE
[    0.000000] BRK [0x4673b000, 0x4673bfff] PGTABLE
[    0.000000] BRK [0x4673c000, 0x4673cfff] PGTABLE
[    0.000000] RAMDISK: [mem 0x35b27000-0x36d8afff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F5A80 000024 (v02 FUJ   )
[    0.000000] ACPI: XSDT 0x00000000BB7F3665 00008C (v01 FSC    PC       01060000 FUJ  00000100)
[    0.000000] ACPI: FACP 0x00000000BB7E2000 0000F4 (v03 FSC    PC       01060000 FUJ  00000100)
[    0.000000] ACPI: DSDT 0x00000000BB7E3000 00ABB2 (v02 FUJ    FJNB219  01060000 FUJ  00000100)
[    0.000000] ACPI: FACS 0x00000000BB79BFC0 000040
[    0.000000] ACPI: FACS 0x00000000BB79BFC0 000040
[    0.000000] ACPI: SSDT 0x00000000BB7FE2DB 0000BA (v01 FUJ    FJNB219  01060000 FUJ  00000100)
[    0.000000] ACPI: SSDT 0x00000000BB7FE395 00008B (v01 FUJ    FJNB219  01060000 FUJ  00000100)
[    0.000000] ACPI: HPET 0x00000000BB7FE514 000038 (v01 FUJ    FJNB219  01060000 FUJ  00000100)
[    0.000000] ACPI: MCFG 0x00000000BB7FE54C 00003C (v01 FUJ    FJNB219  01060000 FUJ  00000100)
[    0.000000] ACPI: SSDT 0x00000000BB7FE588 00042F (v01 FUJ    FJNB219  01060000 FUJ  00000100)
[    0.000000] ACPI: SSDT 0x00000000BB7FE9B7 0002C3 (v01 FUJ    FJNB219  01060000 FUJ  00000100)
[    0.000000] ACPI: APIC 0x00000000BB7FEC7A 000084 (v01 FUJ    FJNB219  01060000 FUJ  00000100)
[    0.000000] ACPI: SPCR 0x00000000BB7FECFE 000050 (v01 FUJ    FJNB219  01060000 FUJ  00000100)
[    0.000000] ACPI: SLIC 0x00000000BB7FED4E 000176 (v01 FSC    PC       01060000 FUJ  00000100)
[    0.000000] ACPI: BOOT 0x00000000BB7FEEC4 000028 (v01 FUJ    FJNB219  01060000 FUJ  00000100)
[    0.000000] ACPI: ASF! 0x00000000BB7EE000 0000A0 (v16 FUJ    FJNB219  01060000 FUJ  00000100)
[    0.000000] ACPI: SSDT 0x00000000BB7E1000 000A50 (v01 PmRef  CpuPm    00003000 INTL 20060912)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x0000000137ffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x137ff8000-0x137ffcfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x0000000137ffffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009afff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000ba962fff]
[    0.000000]   node   0: [mem 0x00000000bac46000-0x00000000bb27bfff]
[    0.000000]   node   0: [mem 0x00000000bb282000-0x00000000bb3e4fff]
[    0.000000]   node   0: [mem 0x00000000bb40f000-0x00000000bb650fff]
[    0.000000]   node   0: [mem 0x00000000bb70f000-0x00000000bb716fff]
[    0.000000]   node   0: [mem 0x00000000bb71f000-0x00000000bb77efff]
[    0.000000]   node   0: [mem 0x00000000bb79f000-0x00000000bb7dffff]
[    0.000000]   node   0: [mem 0x00000000bb7ff000-0x00000000bb7fffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x0000000137ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000137ffffff]
[    0.000000] On node 0 totalpages: 996226
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3994 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 11920 pages used for memmap
[    0.000000]   DMA32 zone: 762856 pages, LIFO batch:31
[    0.000000]   Normal zone: 3584 pages used for memmap
[    0.000000]   Normal zone: 229376 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x00000000be000000-0x00000000bfffffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009b000-0x0009bfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dbfff]
[    0.000000] PM: Registered nosave memory: [mem 0x000dc000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xba963000-0xbac45fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbb27c000-0xbb281fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbb3e5000-0xbb40efff]
[    0.000000] PM: Registered nosave memory: [mem 0xbb651000-0xbb652fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbb653000-0xbb6d3fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbb6d4000-0xbb70efff]
[    0.000000] PM: Registered nosave memory: [mem 0xbb717000-0xbb71efff]
[    0.000000] PM: Registered nosave memory: [mem 0xbb77f000-0xbb79efff]
[    0.000000] PM: Registered nosave memory: [mem 0xbb7e0000-0xbb7fefff]
[    0.000000] PM: Registered nosave memory: [mem 0xbb800000-0xbfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf2825fff]
[    0.000000] PM: Registered nosave memory: [mem 0xf2826000-0xf2826fff]
[    0.000000] PM: Registered nosave memory: [mem 0xf2827000-0xfeafefff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeaff000-0xfeafffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed8ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 35 pages/cpu @ffffa007f7c00000 s105304 r8192 d29864 u524288
[    0.000000] pcpu-alloc: s105304 r8192 d29864 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 980637
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-8-amd64 root=UUID=ef5cbd69-09bc-4199-96a4-0ebe8a25d942 ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3820276K/3984904K available (6268K kernel code, 1161K rwdata, 2872K rodata, 1424K init, 656K bss, 164628K reserved, 0K cma-reserved)
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 64.
[    0.000000]  RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000] NR_IRQS:33024 nr_irqs:456 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2393.960 MHz processor
[    0.000030] Calibrating delay loop (skipped), value calculated using timer frequency.. 4787.92 BogoMIPS (lpj=9575840)
[    0.000032] pid_max: default: 32768 minimum: 301
[    0.000050] ACPI: Core revision 20160831
[    0.010913] ACPI: 6 ACPI AML tables successfully acquired and loaded
[    0.010966] Security Framework initialized
[    0.010968] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.010975] AppArmor: AppArmor disabled by boot time parameter
[    0.011228] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.012285] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.012744] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.012748] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.013070] mce: CPU supports 9 MCE banks
[    0.013086] process: using mwait in idle threads
[    0.013090] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
[    0.013091] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.013093] Spectre V2 : Mitigation: Full generic retpoline
[    0.013094] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.013095] Speculative Store Bypass: Vulnerable
[    0.013507] Freeing SMP alternatives memory: 24K
[    0.024585] ftrace: allocating 25295 entries in 99 pages
[    0.051472] smpboot: Max logical packages: 2
[    0.051999] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.195783] smpboot: CPU0: Intel(R) Core(TM) i3 CPU       M 370  @ 2.40GHz (family: 0x6, model: 0x25, stepping: 0x5)
[    0.195788] Performance Events: PEBS fmt1+, Westmere events, 16-deep LBR, Intel PMU driver.
[    0.195807] core: CPUID marked event: 'bus cycles' unavailable
[    0.195815] ... version:                3
[    0.195815] ... bit width:              48
[    0.195816] ... generic registers:      4
[    0.195817] ... value mask:             0000ffffffffffff
[    0.195817] ... max period:             000000007fffffff
[    0.195818] ... fixed-purpose events:   3
[    0.195819] ... event mask:             000000070000000f
[    0.196549] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.196708] x86: Booting SMP configuration:
[    0.196709] .... node  #0, CPUs:      #1 #2 #3
[    0.203992] x86: Booted up 1 node, 4 CPUs
[    0.203996] smpboot: Total of 4 processors activated (19151.68 BogoMIPS)
[    0.206556] devtmpfs: initialized
[    0.206642] x86/mm: Memory block size: 128MB
[    0.209274] PM: Registering ACPI NVS region [mem 0xbb653000-0xbb6d3fff] (528384 bytes)
[    0.209296] PM: Registering ACPI NVS region [mem 0xbb77f000-0xbb79efff] (131072 bytes)
[    0.209363] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.209375] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.209429] pinctrl core: initialized pinctrl subsystem
[    0.209569] NET: Registered protocol family 16
[    0.219794] cpuidle: using governor ladder
[    0.235793] cpuidle: using governor menu
[    0.235839] Simple Boot Flag at 0x37 set to 0x1
[    0.235860] ACPI: bus type PCI registered
[    0.235863] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.235954] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.235957] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.235975] PCI: Using configuration type 1 for base access
[    0.236226] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.236226] mtrr: probably your BIOS does not setup all CPUs.
[    0.236227] mtrr: corrected configuration.
[    0.251997] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.252296] ACPI: Added _OSI(Module Device)
[    0.252297] ACPI: Added _OSI(Processor Device)
[    0.252298] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.252299] ACPI: Added _OSI(Processor Aggregator Device)
[    0.256264] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.256376] ACPI: Dynamic OEM Table Load:
[    0.256441] ACPI: SSDT 0xFFFFA007F2BE2800 0005AA (v02 FUJ    FJNB219  01060000 FUJ  00000100)
[    0.268229] ACPI: Dynamic OEM Table Load:
[    0.268235] ACPI: SSDT 0xFFFFA007F35B3000 0004B0 (v01 PmRef  Cpu0Ist  00003000 INTL 20060912)
[    0.268554] ACPI: Dynamic OEM Table Load:
[    0.268560] ACPI: SSDT 0xFFFFA007F2A80000 000834 (v01 PmRef  Cpu0Cst  00003001 INTL 20060912)
[    0.269380] ACPI: Dynamic OEM Table Load:
[    0.269385] ACPI: SSDT 0xFFFFA007F2B74000 000303 (v01 PmRef  ApIst    00003000 INTL 20060912)
[    0.269698] ACPI: Dynamic OEM Table Load:
[    0.269703] ACPI: SSDT 0xFFFFA007F2A35A00 000119 (v01 PmRef  ApCst    00003000 INTL 20060912)
[    0.270618] ACPI : EC: EC started
[    0.270619] ACPI : EC: interrupt blocked
[    0.270645] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
[    0.270647] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.270648] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions
[    0.270649] ACPI: Interpreter enabled
[    0.270676] ACPI: (supports S0 S3 S4 S5)
[    0.270677] ACPI: Using IOAPIC for interrupt routing
[    0.270707] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.275282] acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 1)
[    0.276197] acpi PNP0C15:00: ACPI dock station (docks/bays count: 2)
[    0.276875] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.276880] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.276885] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.277495] PCI host bridge to bus 0000:00
[    0.277498] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.277499] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.277501] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.277503] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.277504] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.277506] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfeafffff window]
[    0.277508] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.277517] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
[    0.277540] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
[    0.277645] pci 0000:00:02.0: [8086:0046] type 00 class 0x030000
[    0.277656] pci 0000:00:02.0: reg 0x10: [mem 0xf2000000-0xf23fffff 64bit]
[    0.277662] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.277666] pci 0000:00:02.0: reg 0x20: [io  0x1800-0x1807]
[    0.277815] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
[    0.277843] pci 0000:00:16.0: reg 0x10: [mem 0xf2827800-0xf282780f 64bit]
[    0.277937] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.278055] pci 0000:00:19.0: [8086:10ea] type 00 class 0x020000
[    0.278077] pci 0000:00:19.0: reg 0x10: [mem 0xf2800000-0xf281ffff]
[    0.278089] pci 0000:00:19.0: reg 0x14: [mem 0xf2825000-0xf2825fff]
[    0.278101] pci 0000:00:19.0: reg 0x18: [io  0x1840-0x185f]
[    0.278189] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.278270] pci 0000:00:19.0: System wakeup disabled by ACPI
[    0.278322] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[    0.278345] pci 0000:00:1a.0: reg 0x10: [mem 0xf2828000-0xf28283ff]
[    0.278453] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.278520] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.278573] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[    0.278598] pci 0000:00:1b.0: reg 0x10: [mem 0xf2820000-0xf2823fff 64bit]
[    0.278707] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.278783] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.278834] pci 0000:00:1c.0: [8086:3b4c] type 01 class 0x060400
[    0.278935] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.279008] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.279058] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
[    0.279160] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.279288] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[    0.279311] pci 0000:00:1d.0: reg 0x10: [mem 0xf2828400-0xf28287ff]
[    0.279415] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.279481] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.279530] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.279658] pci 0000:00:1e.0: System wakeup disabled by ACPI
[    0.279705] pci 0000:00:1f.0: [8086:3b07] type 00 class 0x060100
[    0.279919] pci 0000:00:1f.2: [8086:3b2f] type 00 class 0x010601
[    0.279942] pci 0000:00:1f.2: reg 0x10: [io  0x1888-0x188f]
[    0.279953] pci 0000:00:1f.2: reg 0x14: [io  0x183c-0x183f]
[    0.279963] pci 0000:00:1f.2: reg 0x18: [io  0x1880-0x1887]
[    0.279974] pci 0000:00:1f.2: reg 0x1c: [io  0x1838-0x183b]
[    0.279985] pci 0000:00:1f.2: reg 0x20: [io  0x1860-0x187f]
[    0.279996] pci 0000:00:1f.2: reg 0x24: [mem 0xf2827000-0xf28277ff]
[    0.280057] pci 0000:00:1f.2: PME# supported from D3hot
[    0.280170] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[    0.280192] pci 0000:00:1f.3: reg 0x10: [mem 0xf2828800-0xf28288ff 64bit]
[    0.280222] pci 0000:00:1f.3: reg 0x20: [io  0x18a0-0x18bf]
[    0.280358] pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000
[    0.280383] pci 0000:00:1f.6: reg 0x10: [mem 0xf2826000-0xf2826fff 64bit]
[    0.280650] acpiphp: Slot [1] registered
[    0.280656] pci 0000:00:1c.0: PCI bridge to [bus 08-0f]
[    0.280661] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.280666] pci 0000:00:1c.0:   bridge window [mem 0xf0000000-0xf1ffffff]
[    0.280836] pci 0000:10:00.0: [8086:422c] type 00 class 0x028000
[    0.280912] pci 0000:10:00.0: reg 0x10: [mem 0xf2400000-0xf2401fff 64bit]
[    0.281155] pci 0000:10:00.0: PME# supported from D0 D3hot D3cold
[    0.281421] pci 0000:00:1c.1: PCI bridge to [bus 10-17]
[    0.281428] pci 0000:00:1c.1:   bridge window [mem 0xf2400000-0xf24fffff]
[    0.281489] pci 0000:48:03.0: [1217:7135] type 02 class 0x060700
[    0.281512] pci 0000:48:03.0: reg 0x10: [mem 0x00000000-0x00000fff]
[    0.281549] pci 0000:48:03.0: supports D1 D2
[    0.281550] pci 0000:48:03.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.281607] pci 0000:48:03.2: [1217:7120] type 00 class 0x080501
[    0.281627] pci 0000:48:03.2: reg 0x10: [mem 0xf2500000-0xf25000ff]
[    0.281718] pci 0000:48:03.2: supports D1 D2
[    0.281719] pci 0000:48:03.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.281774] pci 0000:48:03.3: [1217:7130] type 00 class 0x018000
[    0.281793] pci 0000:48:03.3: reg 0x10: [mem 0xf2501000-0xf2501fff]
[    0.281884] pci 0000:48:03.3: supports D1 D2
[    0.281886] pci 0000:48:03.3: PME# supported from D0 D1 D2 D3hot D3cold
[    0.281940] pci 0000:48:03.4: [1217:00f7] type 00 class 0x0c0010
[    0.281959] pci 0000:48:03.4: reg 0x10: [mem 0xf2502000-0xf2502fff]
[    0.281970] pci 0000:48:03.4: reg 0x14: [mem 0xf2500800-0xf2500fff]
[    0.282050] pci 0000:48:03.4: supports D1 D2
[    0.282052] pci 0000:48:03.4: PME# supported from D0 D1 D2 D3hot D3cold
[    0.282139] pci 0000:00:1e.0: PCI bridge to [bus 48-49] (subtractive decode)
[    0.282147] pci 0000:00:1e.0:   bridge window [mem 0xf2500000-0xf25fffff]
[    0.282154] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.282156] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.282158] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.282159] pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[    0.282161] pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[    0.282162] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xfeafffff window] (subtractive decode)
[    0.282210] pci_bus 0000:49: busn_res: [bus 49] end can not be updated to 4c
[    0.282216] pci 0000:00:1e.0: bridge has subordinate 49 but max busn 4c
[    0.282648] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    0.282709] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.282770] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.282831] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.282893] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[    0.282953] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.283012] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.283072] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.283248] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
[    0.283252] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.283256] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.283347] PCI host bridge to bus 0000:ff
[    0.283349] pci_bus 0000:ff: root bus resource [bus ff]
[    0.283355] pci 0000:ff:00.0: [8086:2c62] type 00 class 0x060000
[    0.283411] pci 0000:ff:00.1: [8086:2d01] type 00 class 0x060000
[    0.283475] pci 0000:ff:02.0: [8086:2d10] type 00 class 0x060000
[    0.283527] pci 0000:ff:02.1: [8086:2d11] type 00 class 0x060000
[    0.283578] pci 0000:ff:02.2: [8086:2d12] type 00 class 0x060000
[    0.283629] pci 0000:ff:02.3: [8086:2d13] type 00 class 0x060000
[    0.284070] ACPI: Enabled 8 GPEs in block 00 to 3F
[    0.284115] ACPI : EC: interrupt unblocked
[    0.284123] ACPI : EC: event unblocked
[    0.284130] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.284131] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
[    0.284254] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.284255] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.284259] vgaarb: loaded
[    0.284260] vgaarb: bridge control possible 0000:00:02.0
[    0.284355] PCI: Using ACPI for IRQ routing
[    0.294470] PCI: pci_cache_line_size set to 64 bytes
[    0.294579] e820: reserve RAM buffer [mem 0x0009bc00-0x0009ffff]
[    0.294580] e820: reserve RAM buffer [mem 0xba963000-0xbbffffff]
[    0.294583] e820: reserve RAM buffer [mem 0xbb27c000-0xbbffffff]
[    0.294584] e820: reserve RAM buffer [mem 0xbb3e5000-0xbbffffff]
[    0.294586] e820: reserve RAM buffer [mem 0xbb651000-0xbbffffff]
[    0.294588] e820: reserve RAM buffer [mem 0xbb717000-0xbbffffff]
[    0.294590] e820: reserve RAM buffer [mem 0xbb77f000-0xbbffffff]
[    0.294591] e820: reserve RAM buffer [mem 0xbb7e0000-0xbbffffff]
[    0.294592] e820: reserve RAM buffer [mem 0xbb800000-0xbbffffff]
[    0.294782] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.294788] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.296814] clocksource: Switched to clocksource hpet
[    0.304881] VFS: Disk quotas dquot_6.6.0
[    0.304920] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.305035] pnp: PnP ACPI init
[    0.305215] system 00:00: [io  0x0400-0x047f] has been reserved
[    0.305217] system 00:00: [io  0x0480-0x048f] has been reserved
[    0.305219] system 00:00: [io  0x04d0-0x04d1] has been reserved
[    0.305221] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.305223] system 00:00: [io  0x0500-0x050f] has been reserved
[    0.305225] system 00:00: [io  0x0600-0x0603] has been reserved
[    0.305227] system 00:00: [io  0x0800-0x080f] has been reserved
[    0.305229] system 00:00: [io  0x0f40-0x0f41] has been reserved
[    0.305232] system 00:00: [io  0x1100-0x111f] has been reserved
[    0.305234] system 00:00: [io  0x1180-0x11ff] has been reserved
[    0.305236] system 00:00: [io  0x1640-0x164f] has been reserved
[    0.305238] system 00:00: [io  0xf800-0xf87f] has been reserved
[    0.305239] system 00:00: [io  0xf880-0xf8ff] has been reserved
[    0.305241] system 00:00: [io  0xfc00-0xfc7f] has been reserved
[    0.305243] system 00:00: [io  0xfc80-0xfcff] has been reserved
[    0.305245] system 00:00: [io  0xfd00-0xfd6f] has been reserved
[    0.305250] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.305570] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.305573] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
[    0.305575] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.305577] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.305579] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[    0.305581] system 00:01: [mem 0x00000000-0x00000fff] could not be reserved
[    0.305583] system 00:01: [mem 0xfeaff000-0xfeafffff] has been reserved
[    0.305585] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.305587] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.305589] system 00:01: [mem 0xff000000-0xffffffff] has been reserved
[    0.305591] system 00:01: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.305593] system 00:01: [mem 0xfef00000-0xfeffffff] has been reserved
[    0.305595] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.305720] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.305771] pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.305837] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.305973] system 00:05: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.305977] system 00:05: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.306141] pnp 00:06: Plug and Play ACPI device, IDs FUJ02e7 (active)
[    0.306358] pnp: PnP ACPI: found 7 devices
[    0.313177] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.313198] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 08-0f] add_size 200000 add_align 100000
[    0.313210] pci 0000:00:1c.1: bridge window [io  0x1000-0x0fff] to [bus 10-17] add_size 1000
[    0.313213] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 10-17] add_size 200000 add_align 100000
[    0.313231] pci 0000:48:03.0: res[13]=[io  0x0100-0x00ff] res_to_dev_res add_size 100 min_align 100
[    0.313233] pci 0000:48:03.0: res[14]=[io  0x0100-0x00ff] res_to_dev_res add_size 100 min_align 100
[    0.313236] pci 0000:00:1e.0: bridge window [io  0x1000-0x0fff] to [bus 48-49] add_size 1000
[    0.313244] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.313246] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.313248] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.313250] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.313252] pci 0000:00:1c.1: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.313254] pci 0000:00:1c.1: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.313256] pci 0000:00:1e.0: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.313258] pci 0000:00:1e.0: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.313266] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0000000-0xc01fffff 64bit pref]
[    0.313270] pci 0000:00:1c.1: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref]
[    0.313273] pci 0000:00:1c.1: BAR 13: assigned [io  0x3000-0x3fff]
[    0.313276] pci 0000:00:1e.0: BAR 13: assigned [io  0x4000-0x4fff]
[    0.313279] pci 0000:00:1c.0: PCI bridge to [bus 08-0f]
[    0.313282] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.313289] pci 0000:00:1c.0:   bridge window [mem 0xf0000000-0xf1ffffff]
[    0.313293] pci 0000:00:1c.0:   bridge window [mem 0xc0000000-0xc01fffff 64bit pref]
[    0.313300] pci 0000:00:1c.1: PCI bridge to [bus 10-17]
[    0.313304] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    0.313309] pci 0000:00:1c.1:   bridge window [mem 0xf2400000-0xf24fffff]
[    0.313314] pci 0000:00:1c.1:   bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
[    0.313324] pci 0000:48:03.0: res[15]=[mem 0x04000000-0x03ffffff pref] res_to_dev_res add_size 4000000 min_align 4000000
[    0.313326] pci 0000:48:03.0: res[15]=[mem 0x04000000-0x07ffffff pref] res_to_dev_res add_size 4000000 min_align 4000000
[    0.313328] pci 0000:48:03.0: res[16]=[mem 0x04000000-0x03ffffff] res_to_dev_res add_size 4000000 min_align 4000000
[    0.313330] pci 0000:48:03.0: res[16]=[mem 0x04000000-0x07ffffff] res_to_dev_res add_size 4000000 min_align 4000000
[    0.313332] pci 0000:48:03.0: res[13]=[io  0x0100-0x00ff] res_to_dev_res add_size 100 min_align 100
[    0.313334] pci 0000:48:03.0: res[13]=[io  0x0100-0x01ff] res_to_dev_res add_size 100 min_align 100
[    0.313336] pci 0000:48:03.0: res[14]=[io  0x0100-0x00ff] res_to_dev_res add_size 100 min_align 100
[    0.313337] pci 0000:48:03.0: res[14]=[io  0x0100-0x01ff] res_to_dev_res add_size 100 min_align 100
[    0.313341] pci 0000:48:03.0: BAR 0: assigned [mem 0xc4000000-0xc4000fff]
[    0.313347] pci 0000:48:03.0: BAR 15: assigned [mem 0xc8000000-0xcbffffff pref]
[    0.313350] pci 0000:48:03.0: BAR 16: assigned [mem 0xcc000000-0xcfffffff]
[    0.313352] pci 0000:48:03.0: BAR 13: assigned [io  0x4000-0x40ff]
[    0.313353] pci 0000:48:03.0: BAR 14: assigned [io  0x4400-0x44ff]
[    0.313356] pci 0000:48:03.0: CardBus bridge to [bus 49]
[    0.313357] pci 0000:48:03.0:   bridge window [io  0x4000-0x40ff]
[    0.313362] pci 0000:48:03.0:   bridge window [io  0x4400-0x44ff]
[    0.313366] pci 0000:48:03.0:   bridge window [mem 0xc8000000-0xcbffffff pref]
[    0.313371] pci 0000:48:03.0:   bridge window [mem 0xcc000000-0xcfffffff]
[    0.313375] pci 0000:00:1e.0: PCI bridge to [bus 48-49]
[    0.313378] pci 0000:00:1e.0:   bridge window [io  0x4000-0x4fff]
[    0.313385] pci 0000:00:1e.0:   bridge window [mem 0xf2500000-0xf25fffff]
[    0.313396] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.313398] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.313399] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.313401] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff window]
[    0.313402] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff window]
[    0.313404] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xfeafffff window]
[    0.313406] pci_bus 0000:08: resource 0 [io  0x2000-0x2fff]
[    0.313407] pci_bus 0000:08: resource 1 [mem 0xf0000000-0xf1ffffff]
[    0.313409] pci_bus 0000:08: resource 2 [mem 0xc0000000-0xc01fffff 64bit pref]
[    0.313411] pci_bus 0000:10: resource 0 [io  0x3000-0x3fff]
[    0.313412] pci_bus 0000:10: resource 1 [mem 0xf2400000-0xf24fffff]
[    0.313413] pci_bus 0000:10: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
[    0.313415] pci_bus 0000:48: resource 0 [io  0x4000-0x4fff]
[    0.313417] pci_bus 0000:48: resource 1 [mem 0xf2500000-0xf25fffff]
[    0.313418] pci_bus 0000:48: resource 4 [io  0x0000-0x0cf7 window]
[    0.313420] pci_bus 0000:48: resource 5 [io  0x0d00-0xffff window]
[    0.313421] pci_bus 0000:48: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.313423] pci_bus 0000:48: resource 7 [mem 0x000d4000-0x000d7fff window]
[    0.313424] pci_bus 0000:48: resource 8 [mem 0x000d8000-0x000dbfff window]
[    0.313426] pci_bus 0000:48: resource 9 [mem 0xc0000000-0xfeafffff window]
[    0.313428] pci_bus 0000:49: resource 0 [io  0x4000-0x40ff]
[    0.313429] pci_bus 0000:49: resource 1 [io  0x4400-0x44ff]
[    0.313431] pci_bus 0000:49: resource 2 [mem 0xc8000000-0xcbffffff pref]
[    0.313432] pci_bus 0000:49: resource 3 [mem 0xcc000000-0xcfffffff]
[    0.313543] NET: Registered protocol family 2
[    0.313751] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.313835] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.313943] TCP: Hash tables configured (established 32768 bind 32768)
[    0.313976] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.313992] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.314059] NET: Registered protocol family 1
[    0.314081] pci 0000:00:02.0: BIOS left Intel GPU interrupts enabled; disabling
[    0.314088] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.314689] PCI: CLS 64 bytes, default 64
[    0.314749] Unpacking initramfs...
[    0.684016] Freeing initrd memory: 18832K
[    0.684067] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.684070] software IO TLB [mem 0xb6963000-0xba963000] (64MB) mapped at [ffffa00776963000-ffffa0077a962fff]
[    0.684560] audit: initializing netlink subsys (disabled)
[    0.684587] audit: type=2000 audit(1554654912.568:1): initialized
[    0.685099] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[    0.685163] zbud: loaded
[    0.686236] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.686280] io scheduler noop registered
[    0.686281] io scheduler deadline registered
[    0.686296] io scheduler cfq registered (default)
[    0.686810] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.686815] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.686836] intel_idle: MWAIT substates: 0x1120
[    0.686837] intel_idle: v0.4.1 model 0x25
[    0.687000] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.687160] GHES: HEST is not enabled!
[    0.687234] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.708031] 00:06: ttyS0 at I/O 0x220 (irq = 4, base_baud = 115200) is a 16550A
[    0.709441] Linux agpgart interface v0.103
[    0.709836] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    0.709837] AMD IOMMUv2 functionality not available on this system
[    0.710892] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.713337] i8042: Detected active multiplexing controller, rev 1.1
[    0.714800] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.714811] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    0.714895] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    0.714967] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    0.715038] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    0.715459] mousedev: PS/2 mouse device common for all mice
[    0.715549] rtc_cmos 00:04: RTC can wake from S4
[    0.715803] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    0.715841] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.716051] ledtrig-cpu: registered to indicate activity on CPUs
[    0.717083] NET: Registered protocol family 10
[    0.717609] mip6: Mobile IPv6
[    0.717613] NET: Registered protocol family 17
[    0.717619] mpls_gso: MPLS GSO support
[    0.718193] microcode: sig=0x20655, pf=0x10, revision=0x2
[    0.718349] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.718819] registered taskstats version 1
[    0.718861] zswap: loaded using pool lzo/zbud
[    0.719083] ima: No TPM chip found, activating TPM-bypass!
[    0.719085] ima: Allocated hash algorithm: sha256
[    0.719451] rtc_cmos 00:04: setting system clock to 2019-04-07 16:35:13 UTC (1554654913)
[    0.719548] PM: Hibernation image not present or could not be loaded.
[    0.720468] Freeing unused kernel memory: 1424K
[    0.720469] Write protecting the kernel read-only data: 12288k
[    0.721113] Freeing unused kernel memory: 1908K
[    0.724074] Freeing unused kernel memory: 1224K
[    0.729884] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.746135] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.761384] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    0.761510] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    0.761525] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    0.799317] pps_core: LinuxPPS API ver. 1 registered
[    0.799320] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.799624] PTP clock support registered
[    0.802189] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    0.802191] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    0.802342] ACPI: bus type USB registered
[    0.802377] usbcore: registered new interface driver usbfs
[    0.802394] usbcore: registered new interface driver hub
[    0.802438] usbcore: registered new device driver usb
[    0.802874] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    0.803447] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.803704] ehci-pci: EHCI PCI platform driver
[    0.805057] sdhci: Secure Digital Host Controller Interface driver
[    0.805058] sdhci: Copyright(c) Pierre Ossman
[    0.805694] sdhci-pci 0000:48:03.2: SDHCI controller found [1217:7120] (rev 2)
[    0.806983] SCSI subsystem initialized
[    0.807746] mmc0: SDHCI controller on PCI [0000:48:03.2] using DMA
[    0.816899] libata version 3.00 loaded.
[    0.876901] firewire_ohci 0000:48:03.4: added OHCI v1.10 device as card 0, 8 IR + 8 IT contexts, quirks 0x10
[    0.985431] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 8c:73:6e:99:8f:ec
[    0.985436] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[    0.985501] e1000e 0000:00:19.0 eth0: MAC: 9, PHY: 10, PBA No: FFFFFF-0FF
[    0.986091] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.986100] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.986119] ehci-pci 0000:00:1a.0: debug port 2
[    0.990145] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.990162] ehci-pci 0000:00:1a.0: irq 22, io mem 0xf2828000
[    0.990677] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[    1.008910] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.009658] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.009663] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.009667] usb usb1: Product: EHCI Host Controller
[    1.009670] usb usb1: Manufacturer: Linux 4.9.0-8-amd64 ehci_hcd
[    1.009674] usb usb1: SerialNumber: 0000:00:1a.0
[    1.010015] hub 1-0:1.0: USB hub found
[    1.010023] hub 1-0:1.0: 3 ports detected
[    1.010414] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.010419] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.010433] ehci-pci 0000:00:1d.0: debug port 2
[    1.014455] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.014462] ehci-pci 0000:00:1d.0: irq 22, io mem 0xf2828400
[    1.028882] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.028999] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.029004] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.029008] usb usb2: Product: EHCI Host Controller
[    1.029012] usb usb2: Manufacturer: Linux 4.9.0-8-amd64 ehci_hcd
[    1.029015] usb usb2: SerialNumber: 0000:00:1d.0
[    1.029333] hub 2-0:1.0: USB hub found
[    1.029348] hub 2-0:1.0: 3 ports detected
[    1.030269] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    1.031249] ahci 0000:00:1f.2: version 3.0
[    1.031493] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    1.031544] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x13 impl SATA mode
[    1.031548] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
[    1.054590] scsi host0: ahci
[    1.054868] scsi host1: ahci
[    1.055125] scsi host2: ahci
[    1.055320] scsi host3: ahci
[    1.055476] scsi host4: ahci
[    1.055630] scsi host5: ahci
[    1.055718] ata1: SATA max UDMA/133 abar m2048@0xf2827000 port 0xf2827100 irq 25
[    1.055721] ata2: SATA max UDMA/133 abar m2048@0xf2827000 port 0xf2827180 irq 25
[    1.055722] ata3: DUMMY
[    1.055723] ata4: DUMMY
[    1.055727] ata5: SATA max UDMA/133 abar m2048@0xf2827000 port 0xf2827300 irq 25
[    1.055728] ata6: DUMMY
[    1.336919] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.356949] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.372678] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.373641] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    1.373644] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    1.374132] ata1.00: ATA-8: Hitachi HTS545032B9A300, PB3OC61J, max UDMA/133
[    1.374137] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.375256] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    1.375259] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    1.375784] ata1.00: configured for UDMA/133
[    1.376324] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54503 C61J PQ: 0 ANSI: 5
[    1.389216] firewire_core 0000:48:03.4: created device fw0: GUID 00000e10100f789c, S400
[    1.485275] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[    1.485278] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.485631] hub 1-1:1.0: USB hub found
[    1.486088] hub 1-1:1.0: 6 ports detected
[    1.505618] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[    1.505622] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.506058] hub 2-1:1.0: USB hub found
[    1.506762] hub 2-1:1.0: 8 ports detected
[    1.708928] tsc: Refined TSC clocksource calibration: 2394.000 MHz
[    1.708934] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x22821391a86, max_idle_ns: 440795325644 ns
[    1.720875] ata2: SATA link down (SStatus 0 SControl 300)
[    1.772931] usb 1-1.5: new high-speed USB device number 3 using ehci-pci
[    1.787932] random: fast init done
[    1.796924] usb 2-1.1: new full-speed USB device number 3 using ehci-pci
[    1.885767] usb 1-1.5: New USB device found, idVendor=1199, idProduct=9001
[    1.885772] usb 1-1.5: New USB device strings: Mfr=3, Product=2, SerialNumber=0
[    1.885776] usb 1-1.5: Product: Sierra Wireless Gobi 2000
[    1.885780] usb 1-1.5: Manufacturer: Sierra Wireless Inc
[    1.907668] usb 2-1.1: New USB device found, idVendor=08ff, idProduct=2550
[    1.907673] usb 2-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.907677] usb 2-1.1: Product: Fingerprint Sensor
[    1.984910] usb 2-1.3: new high-speed USB device number 4 using ehci-pci
[    2.036674] ata5: SATA link down (SStatus 0 SControl 300)
[    2.039701] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    2.039814] sd 0:0:0:0: [sda] Write Protect is off
[    2.039817] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.039841] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.064544]  sda: sda1 sda2
[    2.064984] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.157058] usb 2-1.3: New USB device found, idVendor=04f2, idProduct=b169
[    2.157064] usb 2-1.3: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[    2.157068] usb 2-1.3: Product: CNF8248
[    2.157071] usb 2-1.3: Manufacturer: Chicony Electronics Co., Ltd.
[    2.190205] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input8
[    2.236955] usb 2-1.4: new full-speed USB device number 5 using ehci-pci
[    2.436197] usb 2-1.4: New USB device found, idVendor=1690, idProduct=0741
[    2.436203] usb 2-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.452092] PM: Starting manual resume from disk
[    2.452099] PM: Hibernation image partition 8:1 present
[    2.452101] PM: Looking for hibernation image.
[    2.452376] PM: Image not found (code -22)
[    2.452378] PM: Hibernation image not present or could not be loaded.
[    2.733082] clocksource: Switched to clocksource tsc
[    2.775794] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    4.299842] ip_tables: (C) 2000-2006 Netfilter Core Team
[    4.448535] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    4.448756] systemd[1]: Detected architecture x86-64.
[    4.479078] systemd[1]: Set hostname to <FUJITSUI3>.
[    4.849431] random: crng init done
[    4.849434] random: 7 urandom warning(s) missed due to ratelimiting
[    5.989494] systemd[1]: Created slice User and Session Slice.
[    5.989647] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    5.989724] systemd[1]: Listening on Syslog Socket.
[    5.990085] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    5.990175] systemd[1]: Listening on fsck to fsckd communication Socket.
[    5.990212] systemd[1]: Reached target Remote File Systems.
[    5.990401] systemd[1]: Listening on Journal Audit Socket.
[    6.722616] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[    7.303466] systemd-journald[203]: Received request to flush runtime journal from PID 1
[    9.868174] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input9
[    9.868198] ACPI: Lid Switch [LID]
[    9.868249] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input10
[    9.868252] ACPI: Power Button [PWRB]
[    9.868293] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input11
[    9.868295] ACPI: Sleep Button [SLPB]
[    9.868337] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input12
[    9.868338] ACPI: Power Button [PWRF]
[    9.914123] [drm] Initialized
[   10.010288] ACPI: Battery Slot [CMB1] (battery present)
[   10.017644] ACPI: Battery Slot [CMB2] (battery present)
[   10.034593] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   10.104080] fujitsu_tablet: Fujitsu Siemens P/T Series
[   10.104180] input: Fujitsu FUJ02BF as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:08/FUJ02BF:00/input/input13
[   10.122549] ACPI: AC Adapter [AC] (off-line)
[   10.158364] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\_SB.PCI0.LPCB.PMIO) (20160831/utaddress-247)
[   10.158370] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.158373] ACPI Warning: SystemIO range 0x00000000000011B0-0x00000000000011BF conflicts with OpRegion 0x0000000000001180-0x00000000000011BB (\_SB.PCI0.LPCB.OGIO) (20160831/utaddress-247)
[   10.158377] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.158378] ACPI Warning: SystemIO range 0x0000000000001180-0x00000000000011AF conflicts with OpRegion 0x0000000000001180-0x00000000000011BB (\_SB.PCI0.LPCB.OGIO) (20160831/utaddress-247)
[   10.158381] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.158409] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   10.276153] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
[   10.276383] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled until i915 loads
[   10.276500] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[   10.298286] input: Fujitsu FUJ02B1 as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:08/FUJ02B1:00/input/input14
[   10.298294] fujitsu_laptop: ACPI: Fujitsu FUJ02B1 [FJEX] (on)
[   10.299019] input: Fujitsu FUJ02E3 as /devices/LNXSYSTM:00/LNXSYBUS:00/FUJ02E3:00/input/input15
[   10.299023] fujitsu_laptop: ACPI: Fujitsu FUJ02E3 [FEXT] (on)
[   10.299482] fujitsu_laptop: BTNI: [0xf0001]
[   10.299777] fujitsu_laptop: driver 0.6.0 successfully loaded
[   10.348512] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   10.441293] input: PC Speaker as /devices/platform/pcspkr/input/input16
[   10.937987] pci 0000:00:00.0: Intel HD Graphics Chipset
[   10.938018] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[   10.938542] pci 0000:00:00.0: detected 32768K stolen memory
[   10.938602] [drm] Memory usable by graphics device = 2048M
[   10.938606] [drm] Replacing VGA console driver
[   10.939398] Console: switching to colour dummy device 80x25
[   10.947213] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   10.947214] [drm] Driver supports precise vblank timestamp query.
[   10.949380] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   10.963800] iTCO_vendor_support: vendor-support=0
[   10.971981] [drm] RC6 disabled, disabling runtime PM support
[   10.988068] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   10.989309] acpi device:03: registered as cooling_device4
[   10.989385] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input17
[   10.989501] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
[   10.994494] fbcon: inteldrmfb (fb0) is primary device
[   11.246782] snd_hda_codec_realtek hdaudioC0D0: ALC269: SKU not ready 0x90970130
[   11.247308] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269: line_outs=1 (0x1a/0x0/0x0/0x0/0x0) type:line
[   11.247310] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=1 (0x14/0x0/0x0/0x0/0x0)
[   11.247312] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[   11.247313] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   11.247314] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   11.247317] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[   11.247318] snd_hda_codec_realtek hdaudioC0D0:      Dock Mic=0x1b
[   11.247320] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[   11.292781] yenta_cardbus 0000:48:03.0: CardBus bridge found [10cf:14d6]
[   11.292802] yenta_cardbus 0000:48:03.0: O2: enabling read prefetch/write burst. If you experience problems or performance issues, use the yenta_socket parameter 'o2_speedup=off'
[   11.453294] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   11.453363] iTCO_wdt: Found a QM57 TCO device (Version=2, TCOBASE=0x0460)
[   11.453500] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   11.570208] Bluetooth: Core ver 2.22
[   11.570224] NET: Registered protocol family 31
[   11.570224] Bluetooth: HCI device and connection manager initialized
[   11.570228] Bluetooth: HCI socket layer initialized
[   11.570231] Bluetooth: L2CAP socket layer initialized
[   11.570240] Bluetooth: SCO socket layer initialized
[   11.906262] usbcore: registered new interface driver btusb
[   11.924694] Intel(R) Wireless WiFi driver for Linux
[   11.924695] Copyright(c) 2003- 2015 Intel Corporation
[   11.924953] iwlwifi 0000:10:00.0: can't disable ASPM; OS doesn't have ASPM control
[   11.988412] iwlwifi 0000:10:00.0: firmware: direct-loading firmware iwlwifi-6000-4.ucode
[   11.988548] iwlwifi 0000:10:00.0: loaded firmware version 9.221.4.1 build 25532 op_mode iwldvm
[   12.172582] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   12.172597] Console: switching to colour frame buffer device 160x50
[   12.175390] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[   12.176151] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
[   12.176228] input: HDA Intel MID Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
[   12.176298] input: HDA Intel MID Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21
[   12.176368] input: HDA Intel MID Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input22
[   12.176437] input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input23
[   12.191572] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   12.217332] iwlwifi 0000:10:00.0: CONFIG_IWLWIFI_DEBUG disabled
[   12.217335] iwlwifi 0000:10:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[   12.217337] iwlwifi 0000:10:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[   12.217339] iwlwifi 0000:10:00.0: Detected Intel(R) Centrino(R) Advanced-N 6200 AGN, REV=0x74
[   12.219433] iwlwifi 0000:10:00.0: L1 Enabled - LTR Disabled
[   12.346009] yenta_cardbus 0000:48:03.0: ISA IRQ mask 0x0c98, PCI irq 16
[   12.346013] yenta_cardbus 0000:48:03.0: Socket status: 30000006
[   12.346020] yenta_cardbus 0000:48:03.0: pcmcia: parent PCI bridge window: [io  0x4000-0x4fff]
[   12.346022] yenta_cardbus 0000:48:03.0: pcmcia: parent PCI bridge window: [mem 0xf2500000-0xf25fffff]
[   12.346025] pcmcia_socket pcmcia_socket0: cs: memory probe 0xf2500000-0xf25fffff:
[   12.346029]  excluding 0xf2500000-0xf250ffff
[   12.453157] kvm: disabled by bios
[   12.640867] usbcore: registered new interface driver usbserial
[   12.640884] usbcore: registered new interface driver usbserial_generic
[   12.640899] usbserial: USB Serial support registered for generic
[   12.660295] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[   12.725277] media: Linux media interface: v0.10
[   12.740325] usbcore: registered new interface driver qcserial
[   12.740338] usbserial: USB Serial support registered for Qualcomm USB modem
[   12.741291] qcserial 1-1.5:1.1: Qualcomm USB modem converter detected
[   12.741388] usb 1-1.5: Qualcomm USB modem converter now attached to ttyUSB0
[   12.743030] qcserial 1-1.5:1.2: Qualcomm USB modem converter detected
[   12.743113] usb 1-1.5: Qualcomm USB modem converter now attached to ttyUSB1
[   12.743805] qcserial 1-1.5:1.3: Qualcomm USB modem converter detected
[   12.743880] usb 1-1.5: Qualcomm USB modem converter now attached to ttyUSB2
[   12.897774] Linux video capture interface: v2.00
[   12.906199] usbcore: registered new interface driver cdc_wdm
[   12.969649] qmi_wwan 1-1.5:1.0: cdc-wdm0: USB WDM device
[   12.969836] qmi_wwan 1-1.5:1.0 wwan0: register 'qmi_wwan' at usb-0000:00:1a.0-1.5, WWAN/QMI device, 06:1b:84:8e:14:1f
[   12.969887] usbcore: registered new interface driver qmi_wwan
[   13.631251] uvcvideo: Found UVC 1.00 device CNF8248 (04f2:b169)
[   13.652132] uvcvideo 2-1.3:1.0: Entity type for entity Extension 5 was not initialized!
[   13.652136] uvcvideo 2-1.3:1.0: Entity type for entity Extension 4 was not initialized!
[   13.652139] uvcvideo 2-1.3:1.0: Entity type for entity Processing 3 was not initialized!
[   13.652141] uvcvideo 2-1.3:1.0: Entity type for entity Camera 1 was not initialized!
[   13.652254] input: CNF8248 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input24
[   13.652331] usbcore: registered new interface driver uvcvideo
[   13.652332] USB Video Class driver (1.1.1)
[   14.023659] Adding 3905532k swap on /dev/sda1.  Priority:-1 extents:1 across:3905532k FS
[   15.389521] qmi_wwan 1-1.5:1.0 wwp0s26u1u5: renamed from wwan0
[   15.540650] iwlwifi 0000:10:00.0 wlp16s0: renamed from wlan0
[   15.581302] intel ips 0000:00:1f.6: i915 driver attached, reenabling gpu turbo
[   16.150484] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[   16.150490]  excluding 0xc0000-0xd3fff 0xdc000-0xfffff
[   16.150512] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[   16.150518]  excluding 0xa0000000-0xa0ffffff
[   16.150534] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[   16.150539]  excluding 0x60000000-0x60ffffff
[   18.407294] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   18.407295] Bluetooth: BNEP filters: protocol multicast
[   18.407300] Bluetooth: BNEP socket layer initialized
[   21.097831] Bluetooth: RFCOMM TTY layer initialized
[   21.097842] Bluetooth: RFCOMM socket layer initialized
[   21.097852] Bluetooth: RFCOMM ver 1.11
[   23.785799] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[   24.001620] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[   24.049755] IPv6: ADDRCONF(NETDEV_UP): wlp16s0: link is not ready
[   24.051948] iwlwifi 0000:10:00.0: L1 Enabled - LTR Disabled
[   24.058537] iwlwifi 0000:10:00.0: L1 Enabled - LTR Disabled
[   24.058632] iwlwifi 0000:10:00.0: Radio type=0x1-0x3-0x1
[   24.280924] iwlwifi 0000:10:00.0: L1 Enabled - LTR Disabled
[   24.287503] iwlwifi 0000:10:00.0: L1 Enabled - LTR Disabled
[   24.287593] iwlwifi 0000:10:00.0: Radio type=0x1-0x3-0x1
[   24.371491] IPv6: ADDRCONF(NETDEV_UP): wlp16s0: link is not ready
[   24.379764] iwlwifi 0000:10:00.0: L1 Enabled - LTR Disabled
[   24.386323] iwlwifi 0000:10:00.0: L1 Enabled - LTR Disabled
[   24.386413] iwlwifi 0000:10:00.0: Radio type=0x1-0x3-0x1
[   24.609180] iwlwifi 0000:10:00.0: L1 Enabled - LTR Disabled
[   24.615761] iwlwifi 0000:10:00.0: L1 Enabled - LTR Disabled
[   24.615857] iwlwifi 0000:10:00.0: Radio type=0x1-0x3-0x1
[   24.699152] IPv6: ADDRCONF(NETDEV_UP): wlp16s0: link is not ready
[   25.373635] IPv6: ADDRCONF(NETDEV_UP): wlp16s0: link is not ready
[   28.555931] iwlwifi 0000:10:00.0: L1 Enabled - LTR Disabled
[   28.562502] iwlwifi 0000:10:00.0: L1 Enabled - LTR Disabled
[   28.562595] iwlwifi 0000:10:00.0: Radio type=0x1-0x3-0x1
[   28.785200] iwlwifi 0000:10:00.0: L1 Enabled - LTR Disabled
[   28.791825] iwlwifi 0000:10:00.0: L1 Enabled - LTR Disabled
[   28.791920] iwlwifi 0000:10:00.0: Radio type=0x1-0x3-0x1
[   28.875121] IPv6: ADDRCONF(NETDEV_UP): wlp16s0: link is not ready
[   28.933600] wlp16s0: authenticate with 0c:80:63:b0:4c:4c
[   28.964861] wlp16s0: send auth to 0c:80:63:b0:4c:4c (try 1/3)
[   28.966664] wlp16s0: authenticated
[   28.969350] wlp16s0: associate with 0c:80:63:b0:4c:4c (try 1/3)
[   28.979912] wlp16s0: RX AssocResp from 0c:80:63:b0:4c:4c (capab=0x411 status=0 aid=1)
[   28.992664] wlp16s0: associated
[   29.397161] IPv6: ADDRCONF(NETDEV_CHANGE): wlp16s0: link becomes ready
[   79.018990] fuse init (API version 7.26)
[  858.214681] perf: interrupt took too long (2501 > 2500), lowering kernel.perf_event_max_sample_rate to 79750
[  975.962996] [drm:ironlake_irq_handler [i915]] *ERROR* CPU pipe A FIFO underrun
[  975.963039] [drm:ironlake_irq_handler [i915]] *ERROR* PCH transcoder A FIFO underrun
 



Bien que ce ne soit pas vital (l'ordinateur fonctionne bien sans ça), je trouve cela un peu dommage de ne pas pouvoir utiliser cet écran.

Dernière modification par Anonyme-11 (07-04-2019 17:57:48)

#6 08-04-2019 22:00:42

èfpé
Membre
Inscription : 10-07-2016

Re : [résolu]Fujitsu T730 avec carte sim et écran tactile

Bonsoir,

Renart_frambivore a écrit :


dmesg | grep input:

[    0.746135] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    2.190205] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input8
[    9.868174] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input9
[    9.868249] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input10
[    9.868293] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input11
[    9.868337] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input12
[   10.104180] input: Fujitsu FUJ02BF as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:08/FUJ02BF:00/input/input13
[   10.298286] input: Fujitsu FUJ02B1 as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:08/FUJ02B1:00/input/input14
[   10.299019] input: Fujitsu FUJ02E3 as /devices/LNXSYSTM:00/LNXSYBUS:00/FUJ02E3:00/input/input15
[   10.441293] input: PC Speaker as /devices/platform/pcspkr/input/input16
[   10.989385] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input17
[   12.175390] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[   12.176151] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
[   12.176228] input: HDA Intel MID Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
[   12.176298] input: HDA Intel MID Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21
[   12.176368] input: HDA Intel MID Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input22
[   12.176437] input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input23
[   13.652254] input: CNF8248 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input24
 


Par ordre d'apparition... un clavier, un pavé tactile, une webcam, mais point d'écran tactile (digitizer).

S'agissant d'un périphérique d'entrée il est également pertinent de regarder le journal du serveur X.

apt-get install inputattach xinput


xinput --list

et

#hors gnome ou kde
cat /var/log/Xorg.0.log

ou

#sous gnome ou kde
cat ~/.local/share/xorg/Xorg.0.log


Le pilote Windows fourni par Fujitsu nous balade un peu (ACPI ? USB ?), en fait le machin est UART.

[    0.687234] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.708031] 00:06: ttyS0 at I/O 0x220 (irq = 4, base_baud = 115200) is a 16550A


Selon cette source, il s'agit d'une régression, installer le noyau rétroporté n'apporterait rien a priori.

ls -l /dev/ttyS*

lsmod


inputattach --w8001 /dev/ttyS0


Si le bazar tombe en marche (module wacom_w8001 chargé ?), il faudra automatiser ça, et calibrer ?

Dernière modification par èfpé (14-06-2019 22:00:42)

Hors ligne

#7 10-04-2019 14:51:04

d33p
Membre
Lieu : Cantal
Distrib. : Debian buster 64bits
Noyau : Linux 4.19.0-8-amd64
(G)UI : GNOME, branches stables
Inscription : 01-12-2015

Re : [résolu]Fujitsu T730 avec carte sim et écran tactile

hello,

et si tu essayes avec un live buster ou fedora, tu pourrais voir si les noyaux plus récents apportent quelque chose en plus?
car bricoler tout à la mano, c'est bien sur le moment, mais ça veut dire aussi beaucoup de maintenance lors des futures mises à jour.

non?

JC

science sans conscience n'est que ruine de l'âme...

Hors ligne

#8 10-04-2019 15:51:06

robert2a
Membre
Distrib. : debian 11
(G)UI : Mate
Inscription : 15-11-2014

Re : [résolu]Fujitsu T730 avec carte sim et écran tactile

Bonjour

a supprimer

Dernière modification par robert2a (10-04-2019 17:50:49)

En ligne

#9 10-04-2019 16:58:03

robert2a
Membre
Distrib. : debian 11
(G)UI : Mate
Inscription : 15-11-2014

Re : [résolu]Fujitsu T730 avec carte sim et écran tactile

solution donné par éfpè  roll
moi j'ai trouvé ceci (un lien sur le Fujitsu T730 )


su -
inputattach --w8001 /dev/ttyS0 &
 



la dernière ligne de son #6

je suis aller voir la description des deux fichiers Xinput et Inputattach  que je connais pas


Xinput est un outil pour configurer l’environnement d'exécution et pour tester
 les périphériques XInput.

******************************************************

Inputattach connecte les périphériques série d’entrée d’autrefois au
sous-système d’entrée : claviers, souris, manettes, écrans tactiles…

Entre autres choses, cela permet l’accès aux anciennes souris à travers le
multiplexeur /dev/input/mice.

Les appareils pris en charge comprennent :
 — les claviers à liaison série dont Newton d’Apple, LK201 et LK401 de
   DEC, celui de Stowaway, les type 4 et 5 de Sun, ceux PS/2 standard avec
   un adaptateur série ;
 — les souris à liaison série utilisant les protocoles de Genius,
   Logitech, Microsoft ou Mouse Systems ;
 — les écrans tactiles à liaison série incluant ceux fabriqués par 3M,
   ELO, Fujitsu, Penmount, Touchright, Touchwindow ;
 — les manettes à liaison série incluant I-Force, SpaceBall, SpaceOrb,
   Gravis Stinger, WingMan Warrior ;
 — le Twiddler d’Handykey utilisé comme manette ou clavier accord.
 



ps: sur le PI3 , le tactile 7 pouces , une embrouille du même genre , c'est pas de l'USB

Dernière modification par robert2a (10-04-2019 18:12:00)

En ligne

#10 13-04-2019 09:08:38

Anonyme-11
Invité

Re : [résolu]Fujitsu T730 avec carte sim et écran tactile

Bonjour!
Je viens d'installer xinput et inputattach et en effectuant la commande de robert2a, j'ai instantanément le tactile qui fonctionne! big_smile
je met en résolu.
Merci beaucoup! smile

#11 13-04-2019 10:22:12

robert2a
Membre
Distrib. : debian 11
(G)UI : Mate
Inscription : 15-11-2014

Re : [résolu]Fujitsu T730 avec carte sim et écran tactile

Bonjour
c'est èfpé qui a trouvé la solution , pas moi tongue
je n'ai fait qu'une recherche inutile puisque tout est dans son #6  ,  wink

En ligne

#12 13-04-2019 10:27:44

Anonyme-11
Invité

Re : [résolu]Fujitsu T730 avec carte sim et écran tactile

ah oui, en effet! smile
merci a tous en tout cas!
je n'aurai jamais réussi sans aide!

#13 14-04-2019 14:47:31

Anonyme-11
Invité

Re : [résolu]Fujitsu T730 avec carte sim et écran tactile

Salut!
Juste un petit message pour dire que je dois répéter l’opération a chaque démarrage.
Je pensais mettre  la ligne dans un script bash et faire exécuter celui-ci au démarrage par cron.
Mais comme la commande doit être effectué en root, ça ne marchera pas (sauf erreur de ma part).
Je fais quelques recherches si ça se trouve il y a un post pour les taches planifiées sur le forum.
bonne journées tout le monde.

#14 14-04-2019 15:16:36

robert2a
Membre
Distrib. : debian 11
(G)UI : Mate
Inscription : 15-11-2014

Re : [résolu]Fujitsu T730 avec carte sim et écran tactile

tu peu le faire en root a partir du système , si éfpè passe par la il va te dire comment faire .

En ligne

#15 12-08-2019 13:09:53

Anonyme-11
Invité

Re : [résolu]Fujitsu T730 avec carte sim et écran tactile

Bonjour,
juste pour clôturer le sujet, j'ai enfin réussi a ce que la commande s'effectue au démarrage.
grâce à ce lien : https://www.jbnet.fr/systeme/linux/debi … chine.html


/etc/init.d/tactile

#!/bin/bash

### BEGIN INIT INFO
# Provides:          tactile
# Required-Start:    $local_fs $network
# Required-Stop:     $local_fs
# Default-Start:     2 3 4 5
# Default-Stop:      0 1 6
# Short-Description: Démarre le tactile
# Description:       Démarre le tactile
### END INIT INFO

inputattach --w8001 /dev/ttyS0 &
 



chmod 700 /etc/init.d/tactile



update-rc.d tactile defaults

Dernière modification par Anonyme-11 (12-08-2019 13:11:57)

Pied de page des forums