Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#1 17-07-2019 16:17:46

nlancien
Membre
Distrib. : Debian Stable
Noyau : Linux 4.19.0-12-amd64
(G)UI : Openbox
Inscription : 17-07-2019

[Resolu] Soucis Buster avec Carte graphique Intel

Bonjour,

J'ai voulu passer mon portable sous Buster, et là, le serveur X plante.

dmesg : https://pastebin.com/KKHK62ZE
lspci : https://pastebin.com/UZ85BS9D
/var/log/Xorg.0.log : https://pastebin.com/5Gq81dzh

J'ai installé de chez non-free firmware-realtek, et firmaware-misc-non-free, sont installés aussi les paquets xserver-xorg-video-intel et intel-media-va-driver. Mais cela ne permet pas au serveur X de démarrer. L'installation est une installation de base via tasksel "Environnement de bureau LXDE"

Si quelqu'un a une idée, je lui en serai reconnaissant.

Merci d'avance

Dernière modification par nlancien (19-07-2019 12:59:28)

Hors ligne

#2 17-07-2019 16:26:09

Herve33
Membre
Lieu : Mérignac 33
Distrib. : Debian 10
Inscription : 21-09-2016

Re : [Resolu] Soucis Buster avec Carte graphique Intel


Acer Aspire 5733 - Debian 10

Hors ligne

#3 17-07-2019 16:42:44

nlancien
Membre
Distrib. : Debian Stable
Noyau : Linux 4.19.0-12-amd64
(G)UI : Openbox
Inscription : 17-07-2019

Re : [Resolu] Soucis Buster avec Carte graphique Intel

@Herve33 Merci

La doc renvoie vers des pages qui ne sont pas de première fraîcheur. Et je ne vois pas ma carte dans leur liste.
Ca marchait bien sous stretch.

Hors ligne

#4 17-07-2019 17:12:27

robert2a
Membre
Distrib. : debian 11
(G)UI : Mate
Inscription : 15-11-2014

Re : [Resolu] Soucis Buster avec Carte graphique Intel

Bonjour
j'ai trouvé ceci


[    40.145] (EE) modeset(0): failed to set mode: Invalid argument
[    40.160] (EE) Failed to open authorization file "/var/run/sddm/{4fac92c1-a96e-42c4-a4bc-8e988924f59c}": No such file or directory
 



sinon le début semble correct , tu utilise "modeset" (KMS du noyau), le paquet xsever-xorg-video-intel n'est pas utile.
pas trouvé de souci de DRM

je précise je connais pas ce matériel.
je dois m'absenter

si possible il vaut mieux utiliser les paquets de debian

tu a l'invite de connexion (ou ça plante avant ) ?

Hors ligne

#5 17-07-2019 17:17:06

nlancien
Membre
Distrib. : Debian Stable
Noyau : Linux 4.19.0-12-amd64
(G)UI : Openbox
Inscription : 17-07-2019

Re : [Resolu] Soucis Buster avec Carte graphique Intel

Ca plante avant l'authentification. J'ai le curseur sur un écran noir. Je dois récupérer la main avec Ctrl + Alt + F1.

J'ai testé en désactivant le service apparmor, mais cela n'a rien changé.

Merci smile

Hors ligne

#6 17-07-2019 17:52:55

robert2a
Membre
Distrib. : debian 11
(G)UI : Mate
Inscription : 15-11-2014

Re : [Resolu] Soucis Buster avec Carte graphique Intel

re,
commencer par les vérifications .
dans /etc/X11/ tu a un xorg.conf ?
dans /etc/X11/xorg.cond.d/  tu a quelque chose ?

tu peu poster ici le retour de lspci (avec les balises codes)


update-pciids
 




lspci
 



pour te dépanner provisoirement , tu peu essayer de mettre l'option "nomodeset"  avec la touche "e" pendant le menu de grub (juste avant "quiet"), la ligne doit commencer par linux et finit par quiet
ce qui donne "nomodeset quiet" avec de la chance tu sera en vesa sur le bureau. (cette modif disparaît au reboot , donc pas permanente )

le retour de la commande


journalctl -r -p err
 


pour avoir les erreurs en cour .

Dernière modification par robert2a (17-07-2019 18:03:37)

Hors ligne

#7 17-07-2019 17:57:39

nlancien
Membre
Distrib. : Debian Stable
Noyau : Linux 4.19.0-12-amd64
(G)UI : Openbox
Inscription : 17-07-2019

Re : [Resolu] Soucis Buster avec Carte graphique Intel

Je n'ai pas de xorg.conf, pas plus de répertoire xorg.conf.d

J'ai stoppé le service sddm; puis ai fait X -configure, puis testé par X -config /root/xorg.conf.new. Sans résultats.

Hors ligne

#8 17-07-2019 18:04:44

robert2a
Membre
Distrib. : debian 11
(G)UI : Mate
Inscription : 15-11-2014

Re : [Resolu] Soucis Buster avec Carte graphique Intel

tu sais ce que c'est se service "sddm" ?

=> https://forum.manjaro.org/t/lightdm-vs-sddm/34023

ce n'est pas l'équivalent de lightdm ?
le gestionnaire de connexion ?

=>  https://debian-facile.org/doc:environnements:kde:sddm

donc on a déjà une piste sur le problème.

il te semble possible de le remplacer par lightdm ? , avec ton bureau cela ne devrait pas poser problème.
mais bon je connais pas les choses installées  de ton bureau.
si c'est aussi casse pied que gdm3 sur gnome ............

sans le gestionnaire de connexion , pas de bureau , un startx en user doit pas donner un bon résultat , mais teste


startx
 

Dernière modification par robert2a (17-07-2019 18:17:31)

Hors ligne

#9 17-07-2019 18:22:37

nlancien
Membre
Distrib. : Debian Stable
Noyau : Linux 4.19.0-12-amd64
(G)UI : Openbox
Inscription : 17-07-2019

Re : [Resolu] Soucis Buster avec Carte graphique Intel

robert2a a écrit :

tu sais ce que c'est se service "sddm" ?


Très probablement le gestionnaire de connexion. pstree m'indique qu'il est le processus père de X. Pour faire :

X -configure


J'ai besoin de stopper X. Peut être pas la meilleure méthode, mais c'ets celle que j'ai trouvé.


nomodeset n'a aucun effet, enfin si, j'arrive sur tty6, tty7 n'existant pas.


lspci :


00:00.0 Host bridge: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series SoC Transaction Register (rev 21)
00:02.0 VGA compatible controller: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Integrated Graphics Controller (rev 21)
00:0b.0 Signal processing controller: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series Power Management Controller (rev 21)
00:13.0 SATA controller: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series SATA Controller (rev 21)
00:14.0 USB controller: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series USB xHCI Controller (rev 21)
00:1a.0 Encryption controller: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series Trusted Execution Engine (rev 21)
00:1b.0 Audio device: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series High Definition Audio Controller (rev 21)
00:1c.0 PCI bridge: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCI Express Port #1 (rev 21)
00:1f.0 ISA bridge: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCU (rev 21)
00:1f.3 SMBus: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx SMBus Controller (rev 21)
01:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8821AE 802.11ac PCIe Wireless Network Adapter
 



Sortie de journalctl :


-- Logs begin at Wed 2019-07-17 19:16:02 CEST, end at Wed 2019-07-17 19:17:01 CEST. --
juil. 17 19:16:26 debian kernel: print_req_error: I/O error, dev sda, sector 3719624
juil. 17 19:16:26 debian kernel: ata1.00: status: { DRDY }
juil. 17 19:16:26 debian kernel: ata1.00: cmd 60/c8:30:c8:c1:38/00:00:00:00:00/40 tag 6 ncq dma 102400 in
                                          res 50/00:c8:c8:c1:38/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
juil. 17 19:16:26 debian kernel: ata1.00: failed command: READ FPDMA QUEUED
juil. 17 19:16:26 debian kernel: ata1: SError: { UnrecovData PHYRdyChg CommWake 10B8B BadCRC }
juil. 17 19:16:26 debian kernel: ata1.00: irq_stat 0x08000000, interface fatal error
juil. 17 19:16:26 debian kernel: ata1.00: exception Emask 0x10 SAct 0x40 SErr 0x2d0100 action 0x6 frozen
juil. 17 19:16:14 debian connmand[469]: The name net.connman.vpn was not provided by any .service files
juil. 17 19:16:14 debian connmand[469]: __connman_inet_get_pnp_nameservers: Cannot read /proc/net/pnp Failed to open file “/proc/net/pnp”: No such file or directory
juil. 17 19:16:12 debian bluetoothd[458]: Failed to set mode: Blocked through rfkill (0x12)
juil. 17 19:16:12 debian bluetoothd[458]: sap-server: Operation not permitted (1)
juil. 17 19:16:12 debian bluetoothd[458]: Sap driver initialization failed.
juil. 17 19:16:07 debian kernel: firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware
juil. 17 19:16:07 debian kernel: bluetooth hci0: firmware: failed to load rtl_bt/rtl8821a_config.bin (-2)
juil. 17 19:16:06 debian kernel: kvm: disabled by bios
juil. 17 19:16:06 debian kernel: kvm: disabled by bios
 



L'erreur bluetooth, n'était pas pénalisante jusque là. Et kvm, ne virtualisant pas, je l'avais désactivé dans le bios

Merci smile

Hors ligne

#10 17-07-2019 18:30:21

robert2a
Membre
Distrib. : debian 11
(G)UI : Mate
Inscription : 15-11-2014

Re : [Resolu] Soucis Buster avec Carte graphique Intel

ceci faut que tu demande , des erreurs sur le bus ATA


juil. 17 19:16:26 debian kernel: print_req_error: I/O error, dev sda, sector 3719624
juil. 17 19:16:26 debian kernel: ata1.00: status: { DRDY }
juil. 17 19:16:26 debian kernel: ata1.00: cmd 60/c8:30:c8:c1:38/00:00:00:00:00/40 tag 6 ncq dma 102400 in
                                          res 50/00:c8:c8:c1:38/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
juil. 17 19:16:26 debian kernel: ata1.00: failed command: READ FPDMA QUEUED
juil. 17 19:16:26 debian kernel: ata1: SError: { UnrecovData PHYRdyChg CommWake 10B8B BadCRC }
juil. 17 19:16:26 debian kernel: ata1.00: irq_stat 0x08000000, interface fatal error
juil. 17 19:16:26 debian kernel: ata1.00: exception Emask 0x10 SAct 0x40 SErr 0x2d0100 action 0x6 frozen
 



tu a installé le firmware realtek ?


apt-get --reinstall install firmware-realtek
 



pour kvm , juste t'informe qu'il est désactivé dans le bios

tu arrive a ouvrir le bureau ? (ou pas )

le contenu du firmware =>  https://packages.debian.org/buster/firmware-realtek

je ne trouve pas  =>  rtl8821a_config.bin

je met ici ton log de X


[    38.857] (--) Log file renamed from "/var/log/Xorg.pid-630.log" to "/var/log/Xorg.0.log"
[    38.858]
X.Org X Server 1.20.4
X Protocol Version 11, Revision 0
[    38.858] Build Operating System: Linux 4.9.0-8-amd64 x86_64 Debian
[    38.858] Current Operating System: Linux debian 4.19.0-5-amd64 #1 SMP Debian 4.19.37-5 (2019-06-19) x86_64
[    38.858] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-5-amd64 root=UUID=782b8fe0-5ee5-45a7-bb56-cf3e916a91cc ro quiet
[    38.858] Build Date: 05 March 2019  08:11:12PM
[    38.858] xorg-server 2:1.20.4-1 (https://www.debian.org/support)
[    38.858] Current version of pixman: 0.36.0
[    38.858]    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[    38.858] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    38.858] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jul 17 16:53:31 2019
[    38.859] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    38.859] (==) No Layout section.  Using the first Screen section.
[    38.859] (==) No screen section available. Using defaults.
[    38.859] (**) |-->Screen "Default Screen Section" (0)
[    38.859] (**) |   |-->Monitor "<default monitor>"
[    38.860] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
[    38.860] (==) Automatically adding devices
[    38.860] (==) Automatically enabling devices
[    38.860] (==) Automatically adding GPU devices
[    38.860] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    38.860] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    38.860]    Entry deleted from font path.
[    38.860] (==) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/100dpi/:unscaled,
    /usr/share/fonts/X11/75dpi/:unscaled,
    /usr/share/fonts/X11/Type1,
    /usr/share/fonts/X11/100dpi,
    /usr/share/fonts/X11/75dpi,
    built-ins
[    38.860] (==) ModulePath set to "/usr/lib/xorg/modules"
[    38.860] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[    38.860] (II) Loader magic: 0x564fdedc6e20
[    38.860] (II) Module ABI versions:
[    38.860]    X.Org ANSI C Emulation: 0.4
[    38.860]    X.Org Video Driver: 24.0
[    38.860]    X.Org XInput driver : 24.1
[    38.860]    X.Org Server Extension : 10.0
[    38.864] (++) using VT number 7
 
[    38.864] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    38.866] (II) xfree86: Adding drm device (/dev/dri/card0)
[    38.870] (--) PCI:*(0@0:2:0) 8086:22b1:1043:1c0d rev 33, Mem @ 0x80000000/16777216, 0x90000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[    38.871] (II) LoadModule: "glx"
[    38.871] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    38.873] (II) Module glx: vendor="X.Org Foundation"
[    38.873]    compiled for 1.20.4, module version = 1.0.0
[    38.874]    ABI class: X.Org Server Extension, version 10.0
[    38.874] (==) Matched modesetting as autoconfigured driver 0
[    38.874] (==) Matched fbdev as autoconfigured driver 1
[    38.874] (==) Matched vesa as autoconfigured driver 2
[    38.874] (==) Assigned the driver to the xf86ConfigLayout
[    38.874] (II) LoadModule: "modesetting"
[    38.874] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    38.874] (II) Module modesetting: vendor="X.Org Foundation"
[    38.874]    compiled for 1.20.4, module version = 1.20.4
[    38.874]    Module class: X.Org Video Driver
[    38.874]    ABI class: X.Org Video Driver, version 24.0
[    38.874] (II) LoadModule: "fbdev"
[    38.874] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    38.874] (II) Module fbdev: vendor="X.Org Foundation"
[    38.874]    compiled for 1.20.0, module version = 0.5.0
[    38.874]    Module class: X.Org Video Driver
[    38.874]    ABI class: X.Org Video Driver, version 24.0
[    38.875] (II) LoadModule: "vesa"
[    38.875] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    38.875] (II) Module vesa: vendor="X.Org Foundation"
[    38.875]    compiled for 1.20.1, module version = 2.4.0
[    38.875]    Module class: X.Org Video Driver
[    38.875]    ABI class: X.Org Video Driver, version 24.0
[    38.875] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    38.875] (II) FBDEV: driver for framebuffer: fbdev
[    38.875] (II) VESA: driver for VESA chipsets: vesa
[    38.887] (II) modeset(0): using drv /dev/dri/card0
[    38.887] (WW) Falling back to old probe method for fbdev
[    38.887] (II) Loading sub module "fbdevhw"
[    38.887] (II) LoadModule: "fbdevhw"
[    38.888] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    38.888] (II) Module fbdevhw: vendor="X.Org Foundation"
[    38.888]    compiled for 1.20.4, module version = 0.0.2
[    38.888]    ABI class: X.Org Video Driver, version 24.0
[    38.888] (II) modeset(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
[    38.888] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[    38.888] (==) modeset(0): RGB weight 888
[    38.888] (==) modeset(0): Default visual is TrueColor
[    38.888] (II) Loading sub module "glamoregl"
[    38.888] (II) LoadModule: "glamoregl"
[    38.889] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[    38.898] (II) Module glamoregl: vendor="X.Org Foundation"
[    38.899]    compiled for 1.20.4, module version = 1.0.1
[    38.899]    ABI class: X.Org ANSI C Emulation, version 0.4
[    38.934] (II) modeset(0): glamor X acceleration enabled on Mesa DRI Intel(R) HD Graphics 400 (Braswell)
[    38.934] (II) modeset(0): glamor initialized
[    38.935] (II) modeset(0): Output eDP-1 has no monitor section
[    39.014] (II) modeset(0): Output DP-1 has no monitor section
[    39.205] (II) modeset(0): Output HDMI-1 has no monitor section
[    39.206] (II) modeset(0): Output DP-2 has no monitor section
[    39.208] (II) modeset(0): Output HDMI-2 has no monitor section
[    39.210] (II) modeset(0): EDID for output eDP-1
[    39.210] (II) modeset(0): Manufacturer: BOE  Model: 66b  Serial#: 0
[    39.210] (II) modeset(0): Year: 2015  Week: 1
[    39.210] (II) modeset(0): EDID Version: 1.4
[    39.210] (II) modeset(0): Digital Display Input
[    39.210] (II) modeset(0): 6 bits per channel
[    39.210] (II) modeset(0): Digital interface is DisplayPort
[    39.210] (II) modeset(0): Max Image Size [cm]: horiz.: 26  vert.: 14
[    39.210] (II) modeset(0): Gamma: 2.20
[    39.210] (II) modeset(0): No DPMS capabilities specified
[    39.210] (II) modeset(0): Supported color encodings: RGB 4:4:4
[    39.210] (II) modeset(0): First detailed timing is preferred mode
[    39.210] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[    39.210] (II) modeset(0): redX: 0.579 redY: 0.356   greenX: 0.343 greenY: 0.579
[    39.210] (II) modeset(0): blueX: 0.161 blueY: 0.109   whiteX: 0.312 whiteY: 0.328
[    39.210] (II) modeset(0): Manufacturer's mask: 0
[    39.210] (II) modeset(0): Supported detailed timing:
[    39.210] (II) modeset(0): clock: 72.3 MHz   Image Size:  256 x 144 mm
[    39.210] (II) modeset(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1526 h_border: 0
[    39.210] (II) modeset(0): v_active: 768  v_sync: 771  v_sync_end 777 v_blanking: 790 v_border: 0
[    39.210] (II) modeset(0): Unknown vendor-specific block 0
[    39.210] (II) modeset(0):  BOE DT
[    39.210] (II) modeset(0):  NT116WHM-N23
[    39.210] (II) modeset(0): EDID (in hex):
[    39.210] (II) modeset(0):   00ffffffffffff0009e56b0600000000
[    39.210] (II) modeset(0):   01190104951a0e78025d40945b579429
[    39.210] (II) modeset(0):   1c505400000001010101010101010101
[    39.210] (II) modeset(0):   0101010101013e1c56a0500016303020
[    39.210] (II) modeset(0):   360000901000001a0000000000000000
[    39.210] (II) modeset(0):   0000000000000000001a000000fe0042
[    39.210] (II) modeset(0):   4f452044540a202020202020000000fe
[    39.210] (II) modeset(0):   004e5431313657484d2d4e32330a003d
[    39.211] (II) modeset(0): Printing probed modes for output eDP-1
[    39.211] (II) modeset(0): Modeline "1366x768"x60.0   72.30  1366 1414 1446 1526  768 771 777 790 +hsync -vsync (47.4 kHz eP)
[    39.211] (II) modeset(0): Modeline "1360x768"x59.8   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsync (47.7 kHz d)
[    39.211] (II) modeset(0): Modeline "1360x768"x60.0   72.00  1360 1408 1440 1520  768 771 781 790 +hsync -vsync (47.4 kHz d)
[    39.211] (II) modeset(0): Modeline "1280x720"x120.0  156.12  1280 1376 1512 1744  720 721 724 746 doublescan -hsync +vsync (89.5 kHz d)
[    39.211] (II) modeset(0): Modeline "1280x720"x120.0  120.75  1280 1304 1320 1360  720 721 724 740 doublescan +hsync -vsync (88.8 kHz d)
[    39.211] (II) modeset(0): Modeline "1280x720"x59.9   74.50  1280 1344 1472 1664  720 723 728 748 -hsync +vsync (44.8 kHz d)
[    39.211] (II) modeset(0): Modeline "1280x720"x59.7   63.75  1280 1328 1360 1440  720 723 728 741 +hsync -vsync (44.3 kHz d)
[    39.211] (II) modeset(0): Modeline "1024x768"x120.1  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[    39.211] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[    39.211] (II) modeset(0): Modeline "960x720"x120.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[    39.211] (II) modeset(0): Modeline "928x696"x120.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[    39.211] (II) modeset(0): Modeline "896x672"x120.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[    39.211] (II) modeset(0): Modeline "1024x576"x119.9   98.50  1024 1092 1200 1376  576 577 580 597 doublescan -hsync +vsync (71.6 kHz d)
[    39.211] (II) modeset(0): Modeline "1024x576"x119.9   78.38  1024 1048 1064 1104  576 577 580 592 doublescan +hsync -vsync (71.0 kHz d)
[    39.211] (II) modeset(0): Modeline "1024x576"x59.9   46.50  1024 1064 1160 1296  576 579 584 599 -hsync +vsync (35.9 kHz d)
[    39.211] (II) modeset(0): Modeline "1024x576"x59.8   42.00  1024 1072 1104 1184  576 579 584 593 +hsync -vsync (35.5 kHz d)
[    39.211] (II) modeset(0): Modeline "960x600"x119.9   96.62  960 1028 1128 1296  600 601 604 622 doublescan -hsync +vsync (74.6 kHz d)
[    39.212] (II) modeset(0): Modeline "960x600"x120.0   77.00  960 984 1000 1040  600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[    39.212] (II) modeset(0): Modeline "960x540"x119.9   86.50  960 1024 1124 1288  540 541 544 560 doublescan -hsync +vsync (67.2 kHz d)
[    39.212] (II) modeset(0): Modeline "960x540"x120.0   69.25  960 984 1000 1040  540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[    39.212] (II) modeset(0): Modeline "960x540"x59.6   40.75  960 992 1088 1216  540 543 548 562 -hsync +vsync (33.5 kHz d)
[    39.212] (II) modeset(0): Modeline "960x540"x59.8   37.25  960 1008 1040 1120  540 543 548 556 +hsync -vsync (33.3 kHz d)
[    39.212] (II) modeset(0): Modeline "800x600"x120.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[    39.212] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    39.212] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    39.212] (II) modeset(0): Modeline "840x525"x120.0   73.12  840 892 980 1120  525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[    39.212] (II) modeset(0): Modeline "840x525"x119.8   59.50  840 864 880 920  525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[    39.212] (II) modeset(0): Modeline "864x486"x59.9   32.50  864 888 968 1072  486 489 494 506 -hsync +vsync (30.3 kHz d)
[    39.212] (II) modeset(0): Modeline "864x486"x59.6   30.50  864 912 944 1024  486 489 494 500 +hsync -vsync (29.8 kHz d)
[    39.212] (II) modeset(0): Modeline "800x512"x120.3   51.56  800 800 828 832  512 512 514 515 doublescan +hsync +vsync (62.0 kHz d)
[    39.212] (II) modeset(0): Modeline "700x525"x120.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[    39.212] (II) modeset(0): Modeline "800x450"x119.9   59.12  800 848 928 1056  450 451 454 467 doublescan -hsync +vsync (56.0 kHz d)
[    39.212] (II) modeset(0): Modeline "800x450"x119.6   48.75  800 824 840 880  450 451 454 463 doublescan +hsync -vsync (55.4 kHz d)
[    39.212] (II) modeset(0): Modeline "640x512"x120.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[    39.212] (II) modeset(0): Modeline "720x450"x119.8   53.25  720 760 836 952  450 451 454 467 doublescan -hsync +vsync (55.9 kHz d)
[    39.212] (II) modeset(0): Modeline "700x450"x119.9   51.75  700 740 812 924  450 451 456 467 doublescan -hsync +vsync (56.0 kHz d)
[    39.212] (II) modeset(0): Modeline "700x450"x119.8   43.25  700 724 740 780  450 451 456 463 doublescan +hsync -vsync (55.4 kHz d)
[    39.212] (II) modeset(0): Modeline "640x480"x120.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[    39.212] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[    39.212] (II) modeset(0): Modeline "720x405"x59.5   22.50  720 744 808 896  405 408 413 422 -hsync +vsync (25.1 kHz d)
[    39.212] (II) modeset(0): Modeline "720x405"x59.0   21.75  720 768 800 880  405 408 413 419 +hsync -vsync (24.7 kHz d)
[    39.212] (II) modeset(0): Modeline "684x384"x119.8   42.62  684 720 788 892  384 385 390 399 doublescan -hsync +vsync (47.8 kHz d)
[    39.212] (II) modeset(0): Modeline "684x384"x119.7   36.12  684 708 724 764  384 385 390 395 doublescan +hsync -vsync (47.3 kHz d)
[    39.212] (II) modeset(0): Modeline "680x384"x119.6   42.38  680 716 784 888  384 385 390 399 doublescan -hsync +vsync (47.7 kHz d)
[    39.212] (II) modeset(0): Modeline "680x384"x119.9   36.00  680 704 720 760  384 385 390 395 doublescan +hsync -vsync (47.4 kHz d)
[    39.212] (II) modeset(0): Modeline "640x400"x119.8   41.75  640 676 740 840  400 401 404 415 doublescan -hsync +vsync (49.7 kHz d)
[    39.212] (II) modeset(0): Modeline "640x400"x120.0   35.50  640 664 680 720  400 401 404 411 doublescan +hsync -vsync (49.3 kHz d)
[    39.212] (II) modeset(0): Modeline "576x432"x120.1   40.81  576 608 668 760  432 432 434 447 doublescan -hsync +vsync (53.7 kHz d)
[    39.212] (II) modeset(0): Modeline "640x360"x119.7   37.25  640 672 736 832  360 361 364 374 doublescan -hsync +vsync (44.8 kHz d)
[    39.212] (II) modeset(0): Modeline "640x360"x119.7   31.88  640 664 680 720  360 361 364 370 doublescan +hsync -vsync (44.3 kHz d)
[    39.212] (II) modeset(0): Modeline "640x360"x59.8   18.00  640 664 720 800  360 363 368 376 -hsync +vsync (22.5 kHz d)
[    39.212] (II) modeset(0): Modeline "640x360"x59.3   17.75  640 688 720 800  360 363 368 374 +hsync -vsync (22.2 kHz d)
[    39.212] (II) modeset(0): Modeline "512x384"x120.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[    39.213] (II) modeset(0): Modeline "512x288"x120.0   23.25  512 532 580 648  288 289 292 299 doublescan -hsync +vsync (35.9 kHz d)
[    39.213] (II) modeset(0): Modeline "512x288"x119.8   21.00  512 536 552 592  288 289 292 296 doublescan +hsync -vsync (35.5 kHz d)
[    39.213] (II) modeset(0): Modeline "480x270"x119.3   20.38  480 496 544 608  270 271 274 281 doublescan -hsync +vsync (33.5 kHz d)
[    39.213] (II) modeset(0): Modeline "480x270"x119.6   18.62  480 504 520 560  270 271 274 278 doublescan +hsync -vsync (33.3 kHz d)
[    39.213] (II) modeset(0): Modeline "400x300"x120.6   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[    39.213] (II) modeset(0): Modeline "400x300"x112.7   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[    39.213] (II) modeset(0): Modeline "432x243"x119.8   16.25  432 444 484 536  243 244 247 253 doublescan -hsync +vsync (30.3 kHz d)
[    39.213] (II) modeset(0): Modeline "432x243"x119.1   15.25  432 456 472 512  243 244 247 250 doublescan +hsync -vsync (29.8 kHz d)
[    39.213] (II) modeset(0): Modeline "320x240"x120.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[    39.213] (II) modeset(0): Modeline "360x202"x119.0   11.25  360 372 404 448  202 204 206 211 doublescan -hsync +vsync (25.1 kHz d)
[    39.213] (II) modeset(0): Modeline "360x202"x118.3   10.88  360 384 400 440  202 204 206 209 doublescan +hsync -vsync (24.7 kHz d)
[    39.213] (II) modeset(0): Modeline "320x180"x119.7    9.00  320 332 360 400  180 181 184 188 doublescan -hsync +vsync (22.5 kHz d)
[    39.213] (II) modeset(0): Modeline "320x180"x118.6    8.88  320 344 360 400  180 181 184 187 doublescan +hsync -vsync (22.2 kHz d)
[    39.291] (II) modeset(0): EDID for output DP-1
[    39.485] (II) modeset(0): EDID for output HDMI-1
[    39.486] (II) modeset(0): EDID for output DP-2
[    39.488] (II) modeset(0): EDID for output HDMI-2
[    39.488] (II) modeset(0): Output eDP-1 connected
[    39.488] (II) modeset(0): Output DP-1 disconnected
[    39.488] (II) modeset(0): Output HDMI-1 disconnected
[    39.488] (II) modeset(0): Output DP-2 disconnected
[    39.488] (II) modeset(0): Output HDMI-2 disconnected
[    39.488] (II) modeset(0): Using exact sizes for initial modes
[    39.488] (II) modeset(0): Output eDP-1 using initial mode 1366x768 +0+0
[    39.488] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[    39.488] (==) modeset(0): DPI set to (96, 96)
[    39.488] (II) Loading sub module "fb"
[    39.488] (II) LoadModule: "fb"
[    39.488] (II) Loading /usr/lib/xorg/modules/libfb.so
[    39.489] (II) Module fb: vendor="X.Org Foundation"
[    39.489]    compiled for 1.20.4, module version = 1.0.0
[    39.489]    ABI class: X.Org ANSI C Emulation, version 0.4
[    39.489] (II) UnloadModule: "fbdev"
[    39.489] (II) Unloading fbdev
[    39.489] (II) UnloadSubModule: "fbdevhw"
[    39.489] (II) Unloading fbdevhw
[    39.489] (II) UnloadModule: "vesa"
[    39.489] (II) Unloading vesa
[    39.496] (==) modeset(0): Backing store enabled
[    39.496] (==) modeset(0): Silken mouse enabled
[    39.552] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[    39.553] (==) modeset(0): DPMS enabled
[    39.556] (II) modeset(0): [DRI2] Setup complete
[    39.557] (II) modeset(0): [DRI2]   DRI driver: i965
[    39.557] (II) modeset(0): [DRI2]   VDPAU driver: i965
[    39.557] (II) Initializing extension Generic Event Extension
[    39.558] (II) Initializing extension SHAPE
[    39.560] (II) Initializing extension MIT-SHM
[    39.561] (II) Initializing extension XInputExtension
[    39.562] (II) Initializing extension XTEST
[    39.562] (II) Initializing extension BIG-REQUESTS
[    39.563] (II) Initializing extension SYNC
[    39.563] (II) Initializing extension XKEYBOARD
[    39.563] (II) Initializing extension XC-MISC
[    39.564] (II) Initializing extension SECURITY
[    39.564] (II) Initializing extension XFIXES
[    39.564] (II) Initializing extension RENDER
[    39.565] (II) Initializing extension RANDR
[    39.565] (II) Initializing extension COMPOSITE
[    39.566] (II) Initializing extension DAMAGE
[    39.566] (II) Initializing extension MIT-SCREEN-SAVER
[    39.566] (II) Initializing extension DOUBLE-BUFFER
[    39.567] (II) Initializing extension RECORD
[    39.567] (II) Initializing extension DPMS
[    39.567] (II) Initializing extension Present
[    39.568] (II) Initializing extension DRI3
[    39.568] (II) Initializing extension X-Resource
[    39.568] (II) Initializing extension XVideo
[    39.569] (II) Initializing extension XVideo-MotionCompensation
[    39.569] (II) Initializing extension SELinux
[    39.569] (II) SELinux: Disabled on system
[    39.569] (II) Initializing extension GLX
[    39.580] (II) AIGLX: Loaded and initialized i965
[    39.580] (II) GLX: Initialized DRI2 GL provider for screen 0
[    39.580] (II) Initializing extension XFree86-VidModeExtension
[    39.580] (II) Initializing extension XFree86-DGA
[    39.581] (II) Initializing extension XFree86-DRI
[    39.581] (II) Initializing extension DRI2
[    39.587] (II) modeset(0): Damage tracking initialized
[    39.587] (II) modeset(0): Setting screen physical size to 361 x 203
[    39.706] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    39.706] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    39.706] (II) LoadModule: "libinput"
[    39.706] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    39.715] (II) Module libinput: vendor="X.Org Foundation"
[    39.715]    compiled for 1.20.4, module version = 0.28.2
[    39.715]    Module class: X.Org XInput Driver
[    39.715]    ABI class: X.Org XInput driver, version 24.1
[    39.715] (II) Using input driver 'libinput' for 'Power Button'
[    39.715] (**) Power Button: always reports core events
[    39.715] (**) Option "Device" "/dev/input/event3"
[    39.716] (**) Option "_source" "server/udev"
[    39.719] (II) event3  - Power Button: is tagged by udev as: Keyboard
[    39.720] (II) event3  - Power Button: device is a keyboard
[    39.720] (II) event3  - Power Button: device removed
[    39.738] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[    39.738] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    39.738] (**) Option "xkb_model" "pc105"
[    39.738] (**) Option "xkb_layout" "fr"
[    39.738] (**) Option "xkb_variant" "latin9"
[    39.806] (II) event3  - Power Button: is tagged by udev as: Keyboard
[    39.806] (II) event3  - Power Button: device is a keyboard
[    39.808] (II) config/udev: Adding input device Asus Wireless Radio Control (/dev/input/event5)
[    39.808] (**) Asus Wireless Radio Control: Applying InputClass "libinput keyboard catchall"
[    39.808] (II) Using input driver 'libinput' for 'Asus Wireless Radio Control'
[    39.808] (**) Asus Wireless Radio Control: always reports core events
[    39.808] (**) Option "Device" "/dev/input/event5"
[    39.808] (**) Option "_source" "server/udev"
[    39.810] (II) event5  - Asus Wireless Radio Control: is tagged by udev as: Keyboard
[    39.810] (II) event5  - Asus Wireless Radio Control: device is a keyboard
[    39.810] (II) event5  - Asus Wireless Radio Control: device removed
[    39.846] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/ATK4002:00/input/input5/event5"
[    39.846] (II) XINPUT: Adding extended input device "Asus Wireless Radio Control" (type: KEYBOARD, id 7)
[    39.846] (**) Option "xkb_model" "pc105"
[    39.846] (**) Option "xkb_layout" "fr"
[    39.846] (**) Option "xkb_variant" "latin9"
[    39.856] (II) event5  - Asus Wireless Radio Control: is tagged by udev as: Keyboard
[    39.856] (II) event5  - Asus Wireless Radio Control: device is a keyboard
[    39.858] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[    39.859] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    39.859] (II) Using input driver 'libinput' for 'Video Bus'
[    39.859] (**) Video Bus: always reports core events
[    39.859] (**) Option "Device" "/dev/input/event4"
[    39.859] (**) Option "_source" "server/udev"
[    39.861] (II) event4  - Video Bus: is tagged by udev as: Keyboard
[    39.861] (II) event4  - Video Bus: device is a keyboard
[    39.861] (II) event4  - Video Bus: device removed
[    39.890] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4/event4"
[    39.890] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[    39.890] (**) Option "xkb_model" "pc105"
[    39.890] (**) Option "xkb_layout" "fr"
[    39.890] (**) Option "xkb_variant" "latin9"
[    39.901] (II) event4  - Video Bus: is tagged by udev as: Keyboard
[    39.901] (II) event4  - Video Bus: device is a keyboard
[    39.903] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[    39.903] (II) No input driver specified, ignoring this device.
[    39.903] (II) This device may have been added with another device file.
[    39.904] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[    39.904] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[    39.904] (II) Using input driver 'libinput' for 'Sleep Button'
[    39.904] (**) Sleep Button: always reports core events
[    39.904] (**) Option "Device" "/dev/input/event2"
[    39.904] (**) Option "_source" "server/udev"
[    39.906] (II) event2  - Sleep Button: is tagged by udev as: Keyboard
[    39.906] (II) event2  - Sleep Button: device is a keyboard
[    39.906] (II) event2  - Sleep Button: device removed
[    39.922] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event2"
[    39.922] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[    39.922] (**) Option "xkb_model" "pc105"
[    39.922] (**) Option "xkb_layout" "fr"
[    39.922] (**) Option "xkb_variant" "latin9"
[    39.926] (II) event2  - Sleep Button: is tagged by udev as: Keyboard
[    39.926] (II) event2  - Sleep Button: device is a keyboard
[    39.930] (II) config/udev: Adding input device USB2.0 VGA UVC WebCam: USB2.0 V (/dev/input/event12)
[    39.931] (**) USB2.0 VGA UVC WebCam: USB2.0 V: Applying InputClass "libinput keyboard catchall"
[    39.931] (II) Using input driver 'libinput' for 'USB2.0 VGA UVC WebCam: USB2.0 V'
[    39.931] (**) USB2.0 VGA UVC WebCam: USB2.0 V: always reports core events
[    39.931] (**) Option "Device" "/dev/input/event12"
[    39.931] (**) Option "_source" "server/udev"
[    39.935] (II) event12 - USB2.0 VGA UVC WebCam: USB2.0 V: is tagged by udev as: Keyboard
[    39.935] (II) event12 - USB2.0 VGA UVC WebCam: USB2.0 V: device is a keyboard
[    39.935] (II) event12 - USB2.0 VGA UVC WebCam: USB2.0 V: device removed
[    39.966] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input12/event12"
[    39.966] (II) XINPUT: Adding extended input device "USB2.0 VGA UVC WebCam: USB2.0 V" (type: KEYBOARD, id 10)
[    39.966] (**) Option "xkb_model" "pc105"
[    39.966] (**) Option "xkb_layout" "fr"
[    39.966] (**) Option "xkb_variant" "latin9"
[    39.978] (II) event12 - USB2.0 VGA UVC WebCam: USB2.0 V: is tagged by udev as: Keyboard
[    39.978] (II) event12 - USB2.0 VGA UVC WebCam: USB2.0 V: device is a keyboard
[    39.979] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event10)
[    39.979] (II) No input driver specified, ignoring this device.
[    39.979] (II) This device may have been added with another device file.
[    39.980] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event11)
[    39.980] (II) No input driver specified, ignoring this device.
[    39.980] (II) This device may have been added with another device file.
[    39.981] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event9)
[    39.981] (II) No input driver specified, ignoring this device.
[    39.981] (II) This device may have been added with another device file.
[    39.982] (II) config/udev: Adding input device Elan Touchpad (/dev/input/event7)
[    39.982] (**) Elan Touchpad: Applying InputClass "libinput touchpad catchall"
[    39.982] (II) Using input driver 'libinput' for 'Elan Touchpad'
[    39.982] (**) Elan Touchpad: always reports core events
[    39.982] (**) Option "Device" "/dev/input/event7"
[    39.982] (**) Option "_source" "server/udev"
[    39.985] (II) event7  - Elan Touchpad: is tagged by udev as: Touchpad
[    39.988] (II) event7  - Elan Touchpad: device is a touchpad
[    39.988] (II) event7  - Elan Touchpad: device removed
[    40.021] (**) Option "config_info" "udev:/sys/devices/pci0000:00/808622C1:03/i2c-0/i2c-ELAN1000:00/input/input7/event7"
[    40.021] (II) XINPUT: Adding extended input device "Elan Touchpad" (type: TOUCHPAD, id 11)
[    40.031] (**) Option "AccelerationScheme" "none"
[    40.031] (**) Elan Touchpad: (accel) selected scheme none/0
[    40.031] (**) Elan Touchpad: (accel) acceleration factor: 2.000
[    40.031] (**) Elan Touchpad: (accel) acceleration threshold: 4
[    40.033] (II) event7  - Elan Touchpad: is tagged by udev as: Touchpad
[    40.036] (II) event7  - Elan Touchpad: device is a touchpad
[    40.038] (II) config/udev: Adding input device Elan Touchpad (/dev/input/mouse0)
[    40.038] (II) No input driver specified, ignoring this device.
[    40.038] (II) This device may have been added with another device file.
[    40.039] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event8)
[    40.039] (**) Asus WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[    40.039] (II) Using input driver 'libinput' for 'Asus WMI hotkeys'
[    40.039] (**) Asus WMI hotkeys: always reports core events
[    40.039] (**) Option "Device" "/dev/input/event8"
[    40.039] (**) Option "_source" "server/udev"
[    40.041] (II) event8  - Asus WMI hotkeys: is tagged by udev as: Keyboard
[    40.042] (II) event8  - Asus WMI hotkeys: device is a keyboard
[    40.042] (II) event8  - Asus WMI hotkeys: device removed
[    40.082] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input8/event8"
[    40.082] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 12)
[    40.082] (**) Option "xkb_model" "pc105"
[    40.082] (**) Option "xkb_layout" "fr"
[    40.082] (**) Option "xkb_variant" "latin9"
[    40.090] (II) event8  - Asus WMI hotkeys: is tagged by udev as: Keyboard
[    40.090] (II) event8  - Asus WMI hotkeys: device is a keyboard
[    40.092] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    40.092] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[    40.092] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[    40.092] (**) AT Translated Set 2 keyboard: always reports core events
[    40.092] (**) Option "Device" "/dev/input/event0"
[    40.092] (**) Option "_source" "server/udev"
[    40.095] (II) event0  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[    40.095] (II) event0  - AT Translated Set 2 keyboard: device is a keyboard
[    40.097] (II) event0  - AT Translated Set 2 keyboard: device removed
[    40.118] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    40.118] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[    40.118] (**) Option "xkb_model" "pc105"
[    40.118] (**) Option "xkb_layout" "fr"
[    40.118] (**) Option "xkb_variant" "latin9"
[    40.129] (II) event0  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[    40.129] (II) event0  - AT Translated Set 2 keyboard: device is a keyboard
[    40.132] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[    40.132] (II) No input driver specified, ignoring this device.
[    40.132] (II) This device may have been added with another device file.
[    40.145] (EE) modeset(0): failed to set mode: Invalid argument
[    40.160] (EE) Failed to open authorization file "/var/run/sddm/{4fac92c1-a96e-42c4-a4bc-8e988924f59c}": No such file or directory
[    43.928] (II) event3  - Power Button: device removed
[    43.942] (II) event5  - Asus Wireless Radio Control: device removed
[    43.974] (II) event4  - Video Bus: device removed
[    44.006] (II) event2  - Sleep Button: device removed
[    44.022] (II) event12 - USB2.0 VGA UVC WebCam: USB2.0 V: device removed
[    44.054] (II) event7  - Elan Touchpad: device removed
[    44.088] (II) event8  - Asus WMI hotkeys: device removed
[    44.119] (II) event0  - AT Translated Set 2 keyboard: device removed
[    44.134] (II) AIGLX: Suspending AIGLX clients for VT switch
 



le serveur X fini l'init de ton gpu , ça plante après


[    39.580] (II) AIGLX: Loaded and initialized i965
[    39.580] (II) GLX: Initialized DRI2 GL provider for screen 0
[    39.580] (II) Initializing extension XFree86-VidModeExtension
[    39.580] (II) Initializing extension XFree86-DGA
[    39.581] (II) Initializing extension XFree86-DRI
[    39.581] (II) Initializing extension DRI2
[    39.587] (II) modeset(0): Damage tracking initialized
[    39.587] (II) modeset(0): Setting screen physical size to 361 x 203
 

Dernière modification par robert2a (17-07-2019 18:49:53)

Hors ligne

#11 17-07-2019 19:00:25

nlancien
Membre
Distrib. : Debian Stable
Noyau : Linux 4.19.0-12-amd64
(G)UI : Openbox
Inscription : 17-07-2019

Re : [Resolu] Soucis Buster avec Carte graphique Intel

Je n'ai aucun accès au bureau, ni a une quelconque interface graphique.

pour kvm, c'est normal.

Je ne pige pas les erreurs ata1. Se pourrait il que cela soit l'UEFI qui mette le souk?

Je viens de re-installer le firmware-reatek. Mais des erreurs ata1 apparaissent encore.

Dernière modification par nlancien (17-07-2019 19:09:14)

Hors ligne

#12 17-07-2019 19:14:42

scorpio810
Membre
Lieu : 81
Distrib. : Debian SID
Noyau : Latest
(G)UI : KDE
Inscription : 22-06-2017
Site Web

Re : [Resolu] Soucis Buster avec Carte graphique Intel


debian Kernel:  4.14.0-trunk-amd64 x86_64 Desktop: KDE Plasma 5.10.5
AMD Ryzen 7 1700X Eight-Core  Advanced Micro Devices [AMD/ATI] Lexa PRO [Radeon RX 550]  Display Server: x11 (X.Org 1.19.5 ) drivers: ati,amdgpu (unloaded: modesetting,fbdev,vesa,radeon)  OpenGL: renderer: Radeon RX 550 Series (POLARIS12 / DRM 3.19.0 / 4.14.0-trunk-amd64, LLVM 5.0.0)
version: 4.5 Mesa 17.3.0-rc5

Hors ligne

#13 17-07-2019 21:36:39

nlancien
Membre
Distrib. : Debian Stable
Noyau : Linux 4.19.0-12-amd64
(G)UI : Openbox
Inscription : 17-07-2019

Re : [Resolu] Soucis Buster avec Carte graphique Intel

J'ai retenté une installation "par defaut", là il m'installe lightdm. Même erreurcrash.gif

Hors ligne

#14 18-07-2019 16:12:12

robert2a
Membre
Distrib. : debian 11
(G)UI : Mate
Inscription : 15-11-2014

Re : [Resolu] Soucis Buster avec Carte graphique Intel

Bonjour
tu a refait une installation de debian ?
ton système est correct , il faut juste trouver le bug du bureau
a partir d une console pure (ctrl+alt+f2 (ou f3))
tu ouvre une console root
et tu regarde l'état de sddm ou lightdm


service sddm status
 


ou


service lighdm status
 


pour arreter le gestionnaire de connexion


service lightdm stop
 


et tu confirme avec le status , par exemple pour moi avec gdm3 (gnome)


service gdm3 status
● gdm.service - GNOME Display Manager
   Loaded: loaded (/lib/systemd/system/gdm.service; static; vendor preset: enabled)
   Active: inactive (dead) since Thu 2019-07-18 16:39:20 CEST; 8min ago
  Process: 682 ExecStartPre=/usr/share/gdm/generate-config (code=exited, status=0/SUCCESS)
  Process: 687 ExecStart=/usr/sbin/gdm3 (code=exited, status=0/SUCCESS)
 Main PID: 687 (code=exited, status=0/SUCCESS)

juil. 18 16:37:48 raven2200g systemd[1]: Starting GNOME Display Manager...
juil. 18 16:37:48 raven2200g systemd[1]: Started GNOME Display Manager.
juil. 18 16:37:48 raven2200g gdm-launch-environment][733]: pam_unix(gdm-launch-environment:session): session opened for user Debian-gdm by (uid=0)
juil. 18 16:38:13 raven2200g gdm3[687]: Child process -964 was already dead.
juil. 18 16:39:20 raven2200g systemd[1]: Stopping GNOME Display Manager...
juil. 18 16:39:20 raven2200g systemd[1]: gdm.service: Succeeded.
juil. 18 16:39:20 raven2200g systemd[1]: Stopped GNOME Display Manager.
 



tu vois que le display manager est "stopped"  ( arrêt )

tu ouvre une autre console pure , par exemple f3 ou f4  (ctrl + alt +f3)
ouvre une session user + mdp
et lance cette commande


startx
 



moi j'ouvre le bureau "gnome sous X" (par defaut j'ai fxce4 mais comme j'utilise pas le gestionnaire il ne prend pas mon choix en compte)
toi tu a qu'un bureau il doit t' ouvrir LXDE

deux cas , soit ça échoue , soit le bureau s'ouvre.
le contenu du log de X sera intéressant .

il faut bien sur un système sain avec les firmwares installés.
premier cas c'est le serveur X qui plante
deuxième cas c'est le gestionnaire de connexion

si j'ai bien compris tu a refais une installation de buster + LXDE , c'est pas la peine de recommencer , si le système est correct , seul le bureau pose problème.

ps: LXDE a son propre gestionnaire de connexion  , le paquet LXDM il me semble

remarque :
ton /home est neuf , propre , ou séparé
sinon un bureau lxde a installer par exemple


apt-get install lxde lxdm
 



pour purger les gestionnaires


apt-get remove --purge lightdm sddm
 



avec le risque de passer des paquets en "autoremove" ou casser le bureau
pour l'instant je ne comprend pas d ou vient ce souci , et a priori la machine a fonctionné sous strech

si on reprend ton #1 et que le log de X semble correct
le messge


[    40.145] (EE) modeset(0): failed to set mode: Invalid argument
[    40.160] (EE) Failed to open authorization file "/var/run/sddm/{4fac92c1-a96e-42c4-a4bc-8e988924f59c}": No such file or directory
 



ceci ne parle pas trop tongue =>   failed to set mode: Invalid argument
ce qui provoque le bug du gestionnaire de connexion (deuxième ligne)

j'ai trouvé quelque chose qui ressemble a ton problème  =>  https://bugzilla.redhat.com/show_bug.cgi?id=1662548
machine intel et noyau 4.19

et ici =>  https://bugzilla.redhat.com/show_bug.cgi?id=1662057
avec un message a la fin


It has been fixed (workarounded?) by Driver "intel" from Bug 1630367 Comment 18.
There is also Bug 1697591 for it.
 



en fonction des résultats des commandes ci dessus , on peu tester ceci =>  https://bugzilla.redhat.com/show_bug.cgi?id=1630367#c18


Create the file "/etc/X11/xorg.conf.d/20-intel.conf" with these contents, log out and log in again (or reboot):

Section "Device"
  Identifier "Intel Graphics"
  Driver "intel"
EndSection
 



créer le fichier 20-intel.conf
si le dossier n'existe pas


mkdir /etc/X11/xorg.conf.d
 


créer le fichier


nano /etc/X11/xorg.conf.d/20-intel.conf
 



copier coller ce contenu et enregistrer avec nano


Section "Device"
  Identifier "Intel Graphics"
  Driver "intel"
EndSection
 


et un reboot


reboot
 



si un barbu passe par la et a une idée  roll
je te laisse lire tout ça et répondre

Dernière modification par robert2a (18-07-2019 17:03:08)

Hors ligne

#15 19-07-2019 06:37:56

nlancien
Membre
Distrib. : Debian Stable
Noyau : Linux 4.19.0-12-amd64
(G)UI : Openbox
Inscription : 17-07-2019

Re : [Resolu] Soucis Buster avec Carte graphique Intel

@robert2a

Mille merci ca fonctionne !

merci.gif

Hors ligne

#16 19-07-2019 09:33:05

robert2a
Membre
Distrib. : debian 11
(G)UI : Mate
Inscription : 15-11-2014

Re : [Resolu] Soucis Buster avec Carte graphique Intel

Bonjour
tu précise pas mais je suppose que c'est la création du fichier 20-intel.conf qui a résolu ce bug  ?
je pense que c'est le nouveau noyau (4.19) qui a provoqué ce souci

Hors ligne

#17 19-07-2019 13:00:13

nlancien
Membre
Distrib. : Debian Stable
Noyau : Linux 4.19.0-12-amd64
(G)UI : Openbox
Inscription : 17-07-2019

Re : [Resolu] Soucis Buster avec Carte graphique Intel

Oui j'ai créé le fichier 20-intel.conf, et reboot.

Hors ligne

Pied de page des forums