Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#1 31-07-2019 08:49:09

art_clld
Membre
Distrib. : Debian 10 Buster
Noyau : Linux 4.19.0-5-amd64
(G)UI : Gnome
Inscription : 31-07-2019

Touchpad inactif après sortie de veille

Bonjour à tous·tes

J'ai vu cette question posée de nombreuses autres fois, mais je n'ai pas trouvée de solution (peut être que j'ai mal cherché, ça ne sera pas la première fois...) : quand je rabat l'écran du pc, il se met en veille. En l'ouvrant, quel que soit le temps passé fermé et en veille, la session est ouverte (donc pas de demande de mdp, mais c'est un autre problème) et le touchpad ne fonctionne plus (ni pour déplacer la souris, ni pour cliquer).

La seule solution pour l'instant est de redémarrer le pc depuis le terminal pour le touchpad se réveille. Ce qui est tout de même assez fatiguant.
J'ai présumé que c'était un problème de pilote, mais j'ai beau réinstaller xserver-xorg-input-synaptics, rien n'y fait.

Si quelqu'un a une petite idée, ça serait fort arrangeant

Merci d'avance

Hors ligne

#2 31-07-2019 19:37:40

Croutons
Membre
Distrib. : Debian10 Buster
Noyau : Linux 4.19.0-9-amd64
(G)UI : Mate
Inscription : 16-12-2016

Re : Touchpad inactif après sortie de veille

Bonjour
et avec le paquet libinput c'est pas mieux?

apt show xserver-xorg-input-libinput


Package: xserver-xorg-input-libinput
Version: 0.28.2-2
Priority: optional
Section: x11
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Installed-Size: 141 kB
Provides: xorg-driver-input
Depends: libc6 (>= 2.7), libinput10 (>= 1.11.1), xorg-input-abi-24, xserver-xorg-core (>= 2:1.18.99.901)
Homepage: https://www.x.org
Download-Size: 61,5 kB
APT-Manual-Installed: no
APT-Sources: http://ftp.fr.debian.org/debian buster/main amd64 Packages
Description: serveur X pour X.Org — pilote d’entrées libinput
 Ce paquet fournit le pilote d’entrées pour les périphériques utilisant la
 bibliothèque libinput. Il peut manipuler les claviers, souris et pavés
 tactiles, et remplace les pilotes distincts -evdev et -synaptics.
 .
 Ce paquet est compilé à partir du module de pilote xf86-input-libinput d’X.Org.
 


-->les cahiers du debutant<--      WikiDF-->Découvrir les principales commandes Linux<--
L' expérience, c'est le nom que chacun donne à ses erreurs. Oscar Wilde

Hors ligne

#3 01-08-2019 09:40:10

art_clld
Membre
Distrib. : Debian 10 Buster
Noyau : Linux 4.19.0-5-amd64
(G)UI : Gnome
Inscription : 31-07-2019

Re : Touchpad inactif après sortie de veille

Merci pour la réponse !

La commande me rend ça :

 
arthur@arthur:~$ sudo apt show xserver-xorg-input-libinput
[sudo] Mot de passe de arthur : 
Package: xserver-xorg-input-libinput
Version: 0.28.2-2
Priority: optional
Section: x11
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Installed-Size: 141 kB
Provides: xorg-driver-input
Depends: libc6 (>= 2.7), libinput10 (>= 1.11.1), xorg-input-abi-24, xserver-xorg-core (>= 2:1.18.99.901)
Homepage: https://www.x.org
Download-Size: 61,5 kB
APT-Manual-Installed: yes
APT-Sources: http://deb.debian.org/debian buster/main amd64 Packages
Description: serveur X pour X.Org — pilote d’entrées libinput
 Ce paquet fournit le pilote d’entrées pour les périphériques utilisant la
 bibliothèque libinput. Il peut manipuler les claviers, souris et pavés
 tactiles, et remplace les pilotes distincts -evdev et -synaptics.
 .
 Ce paquet est compilé à partir du module de pilote xf86-input-libinput d’X.Org.

 



Le paquet est installé, mais comment être sûr que ça soit celui-ci qui est utilisé ?

Hors ligne

#4 01-08-2019 11:00:04

Croutons
Membre
Distrib. : Debian10 Buster
Noyau : Linux 4.19.0-9-amd64
(G)UI : Mate
Inscription : 16-12-2016

Re : Touchpad inactif après sortie de veille

non je disais que ce paquet remplace xserver-xorg-input-synaptics, cela coute rien d'essayer
tu purges synaptics et tu essaie libinput

apt purge xserver-xorg-input-synaptics



puis

apt install xserver-xorg-input-libinput

Dernière modification par Croutons (01-08-2019 11:05:59)


-->les cahiers du debutant<--      WikiDF-->Découvrir les principales commandes Linux<--
L' expérience, c'est le nom que chacun donne à ses erreurs. Oscar Wilde

Hors ligne

#5 01-08-2019 13:22:26

art_clld
Membre
Distrib. : Debian 10 Buster
Noyau : Linux 4.19.0-5-amd64
(G)UI : Gnome
Inscription : 31-07-2019

Re : Touchpad inactif après sortie de veille

Rien à faire, le problème persiste. Ce qui est étrange, c'est que debian ne se verrouille pas quand il se met en veille. Quand j'ouvre l'écran, debian est déjà ouvert sur le bureau (et le touchpad ne fonctionne pas...). Il y a un indice au démarrage avec des erreurs de ACPI qui apparaissent à l'écran à chaque fois.
Je ne sais pas si c'est lié, sans doute est-ce un autre topic, en tout cas c'est assez étrange

Hors ligne

#6 01-08-2019 13:57:31

nifseg
Membre
Lieu : Dans une forêt
Distrib. : Debian Stretch + Buster
Noyau : 4.9 amd64 i386 + 4.19 amd64 i386
(G)UI : Gnome/Mate/Cinnamon/KDE sous FreeBSD
Inscription : 15-12-2013

Re : Touchpad inactif après sortie de veille

Si tu veux voir les erreurs que te renvoi ton noyau suite au démarrage

dmesg



Et sinon jeter un oeil dans tes logs, dans /var/log


L'important n'est pas la chute mais l'atterrissage...
Chapardeur de chocolat DF!!!
Admin un jour, admin toujours...
Utilisateur de plusieurs OS de type Unix comme GNU/Linux, Système BSD (FreeBSD, OpenBSD, NetBSD), Système Solaris (OpenIndiana). I love Unix !!!

Hors ligne

#7 01-08-2019 18:07:49

art_clld
Membre
Distrib. : Debian 10 Buster
Noyau : Linux 4.19.0-5-amd64
(G)UI : Gnome
Inscription : 31-07-2019

Re : Touchpad inactif après sortie de veille

Le message d'erreur au démarrage :

[    0.665554] ACPI Error: Needed type [Reference], found [Integer] 00000000c2bc531f (20180810/exresop-69)
[    0.665648] ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20180810/dswexec-427)
[    0.665739] ACPI Error: Method parse/execution failed \_PR.CPU0._PDC, AE_AML_OPERAND_TYPE (20180810/psparse-516)



Et le retour complet de dmseg, si ça peut servir :

arthur@arthur:~$ sudo dmesg
[sudo] Mot de passe de arthur : 
[    0.000000] Linux version 4.19.0-5-amd64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Debian 4.19.37-5+deb10u1 (2019-07-19)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-5-amd64 root=UUID=4fc1d68a-e1d5-4277-a15e-70cb808c73b1 ro quiet
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ce233fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000ce234000-0x00000000dcd3efff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000dcd3f000-0x00000000dce7efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000dce7f000-0x00000000dcefefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000dceff000-0x00000000df9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe101000-0x00000000fe112fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021e5fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: LENOVO 20AMS1J100/20AMS1J100, BIOS GIET95WW (2.45 ) 02/19/2019
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2494.268 MHz processor
[    0.005400] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.005406] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.005425] last_pfn = 0x21e600 max_arch_pfn = 0x400000000
[    0.005435] MTRR default type: write-back
[    0.005437] MTRR fixed ranges enabled:
[    0.005440]   00000-9FFFF write-back
[    0.005443]   A0000-BFFFF uncachable
[    0.005445]   C0000-FFFFF write-protect
[    0.005447] MTRR variable ranges enabled:
[    0.005451]   0 base 00E0000000 mask 7FE0000000 uncachable
[    0.005454]   1 base 00DE000000 mask 7FFE000000 uncachable
[    0.005456]   2 base 00DD000000 mask 7FFF000000 uncachable
[    0.005458]   3 base 00DCF00000 mask 7FFFF00000 uncachable
[    0.005459]   4 disabled
[    0.005460]   5 disabled
[    0.005462]   6 disabled
[    0.005463]   7 disabled
[    0.005464]   8 disabled
[    0.005465]   9 disabled
[    0.007669] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.007949] last_pfn = 0xce234 max_arch_pfn = 0x400000000
[    0.008253] found SMP MP-table at [mem 0x000f0100-0x000f010f]
[    0.008402] Base memory trampoline at [(____ptrval____)] 97000 size 24576
[    0.008409] Using GB pages for direct mapping
[    0.008413] BRK [0xb9e01000, 0xb9e01fff] PGTABLE
[    0.008418] BRK [0xb9e02000, 0xb9e02fff] PGTABLE
[    0.008420] BRK [0xb9e03000, 0xb9e03fff] PGTABLE
[    0.008493] BRK [0xb9e04000, 0xb9e04fff] PGTABLE
[    0.008499] BRK [0xb9e05000, 0xb9e05fff] PGTABLE
[    0.009094] RAMDISK: [mem 0x33ba7000-0x35dcafff]
[    0.009103] ACPI: Early table checksum verification disabled
[    0.009220] ACPI: RSDP 0x00000000000F0120 000024 (v02 LENOVO)
[    0.009230] ACPI: XSDT 0x00000000DCEFE170 0000E4 (v01 LENOVO TP-GI    00002450 PTEC 00000002)
[    0.009244] ACPI: FACP 0x00000000DCEF8000 00010C (v05 LENOVO TP-GI    00002450 PTEC 00000002)
[    0.009258] ACPI: DSDT 0x00000000DCEE2000 010C3E (v01 LENOVO TP-GI    00002450 INTL 20120711)
[    0.009267] ACPI: FACS 0x00000000DCE6A000 000040
[    0.009274] ACPI: SLIC 0x00000000DCEFD000 000176 (v01 LENOVO TP-GI    00002450 PTEC 00000001)
[    0.009282] ACPI: DBGP 0x00000000DCEFB000 000034 (v01 LENOVO TP-GI    00002450 PTEC 00000002)
[    0.009290] ACPI: ECDT 0x00000000DCEFA000 000052 (v01 LENOVO TP-GI    00002450 PTEC 00000002)
[    0.009297] ACPI: HPET 0x00000000DCEF7000 000038 (v01 LENOVO TP-GI    00002450 PTEC 00000002)
[    0.009305] ACPI: APIC 0x00000000DCEF6000 000098 (v01 LENOVO TP-GI    00002450 PTEC 00000002)
[    0.009313] ACPI: MCFG 0x00000000DCEF5000 00003C (v01 LENOVO TP-GI    00002450 PTEC 00000002)
[    0.009321] ACPI: SSDT 0x00000000DCEF4000 000033 (v01 LENOVO TP-SSDT1 00000100 INTL 20120711)
[    0.009329] ACPI: SSDT 0x00000000DCEF3000 000486 (v01 LENOVO TP-SSDT2 00000200 INTL 20120711)
[    0.009336] ACPI: SSDT 0x00000000DCEE1000 0009CB (v01 LENOVO SataAhci 00001000 INTL 20120711)
[    0.009344] ACPI: SSDT 0x00000000DCEE0000 000152 (v01 LENOVO Rmv_Batt 00001000 INTL 20120711)
[    0.009352] ACPI: SSDT 0x00000000DCEDF000 0007F5 (v01 LENOVO Cpu0Ist  00003000 INTL 20120711)
[    0.009361] ACPI: SSDT 0x00000000DCEDE000 000AD8 (v01 LENOVO CpuPm    00003000 INTL 20120711)
[    0.009369] ACPI: SSDT 0x00000000DCEDC000 00125C (v01 LENOVO SaSsdt   00003000 INTL 20120711)
[    0.009377] ACPI: SSDT 0x00000000DCEDB000 000379 (v01 LENOVO CppcTabl 00001000 INTL 20120711)
[    0.009385] ACPI: PCCT 0x00000000DCEDA000 00006E (v05 LENOVO TP-GI    00002450 PTEC 00000002)
[    0.009393] ACPI: SSDT 0x00000000DCED9000 000AC4 (v01 LENOVO Cpc_Tabl 00001000 INTL 20120711)
[    0.009401] ACPI: TCPA 0x00000000DCED8000 000032 (v02 PTL    LENOVO   06040000 LNVO 00000001)
[    0.009409] ACPI: UEFI 0x00000000DCED7000 000042 (v01 LENOVO TP-GI    00002450 PTEC 00000002)
[    0.009417] ACPI: MSDM 0x00000000DCDD2000 000055 (v03 LENOVO TP-GI    00002450 PTEC 00000002)
[    0.009425] ACPI: ASF! 0x00000000DCEFC000 0000A5 (v32 LENOVO TP-GI    00002450 PTEC 00000002)
[    0.009433] ACPI: BATB 0x00000000DCED6000 000046 (v01 LENOVO TP-GI    00002450 PTEC 00000002)
[    0.009441] ACPI: FPDT 0x00000000DCED5000 000064 (v01 LENOVO TP-GI    00002450 PTEC 00000002)
[    0.009448] ACPI: UEFI 0x00000000DCED4000 0002F6 (v01 LENOVO TP-GI    00002450 PTEC 00000002)
[    0.009467] ACPI: Local APIC address 0xfee00000
[    0.009664] No NUMA configuration found
[    0.009666] Faking a node at [mem 0x0000000000000000-0x000000021e5fffff]
[    0.009675] NODE_DATA(0) allocated [mem 0x21e5f9000-0x21e5fdfff]
[    0.009743] Zone ranges:
[    0.009744]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.009748]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.009751]   Normal   [mem 0x0000000100000000-0x000000021e5fffff]
[    0.009754]   Device   empty
[    0.009756] Movable zone start for each node
[    0.009758] Early memory node ranges
[    0.009760]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.009762]   node   0: [mem 0x0000000000100000-0x00000000ce233fff]
[    0.009764]   node   0: [mem 0x0000000100000000-0x000000021e5fffff]
[    0.009772] Reserved but unavailable: 100 pages
[    0.009776] Initmem setup node 0 [mem 0x0000000000001000-0x000000021e5fffff]
[    0.009779] On node 0 totalpages: 2017232
[    0.009782]   DMA zone: 64 pages used for memmap
[    0.009783]   DMA zone: 21 pages reserved
[    0.009786]   DMA zone: 3996 pages, LIFO batch:0
[    0.010055]   DMA32 zone: 13129 pages used for memmap
[    0.010057]   DMA32 zone: 840244 pages, LIFO batch:63
[    0.067047]   Normal zone: 18328 pages used for memmap
[    0.067050]   Normal zone: 1172992 pages, LIFO batch:63
[    0.142652] Reserving Intel graphics memory at [mem 0xdda00000-0xdf9fffff]
[    0.142973] ACPI: PM-Timer IO Port: 0x1808
[    0.142977] ACPI: Local APIC address 0xfee00000
[    0.142992] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.142994] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.143010] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
[    0.143015] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.143018] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.143021] ACPI: IRQ0 used by override.
[    0.143024] ACPI: IRQ9 used by override.
[    0.143029] Using ACPI (MADT) for SMP configuration information
[    0.143033] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[    0.143042] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.143082] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.143086] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[    0.143088] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.143090] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.143093] PM: Registered nosave memory: [mem 0xce234000-0xdcd3efff]
[    0.143095] PM: Registered nosave memory: [mem 0xdcd3f000-0xdce7efff]
[    0.143097] PM: Registered nosave memory: [mem 0xdce7f000-0xdcefefff]
[    0.143099] PM: Registered nosave memory: [mem 0xdceff000-0xdf9fffff]
[    0.143100] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
[    0.143102] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.143104] PM: Registered nosave memory: [mem 0xfc000000-0xfe100fff]
[    0.143105] PM: Registered nosave memory: [mem 0xfe101000-0xfe112fff]
[    0.143107] PM: Registered nosave memory: [mem 0xfe113000-0xfebfffff]
[    0.143109] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.143110] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff]
[    0.143111] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
[    0.143113] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff]
[    0.143114] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[    0.143116] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[    0.143117] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.143118] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.143120] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.143121] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
[    0.143123] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
[    0.143127] [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[    0.143129] Booting paravirtualized kernel on bare hardware
[    0.143135] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.436185] random: get_random_bytes called from start_kernel+0x93/0x52c with crng_init=0
[    0.436202] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[    0.436837] percpu: Embedded 44 pages/cpu s143256 r8192 d28776 u262144
[    0.436854] pcpu-alloc: s143256 r8192 d28776 u262144 alloc=1*2097152
[    0.436857] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[    0.436911] Built 1 zonelists, mobility grouping on.  Total pages: 1985690
[    0.436913] Policy zone: Normal
[    0.436916] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-5-amd64 root=UUID=4fc1d68a-e1d5-4277-a15e-70cb808c73b1 ro quiet
[    0.447838] Calgary: detecting Calgary via BIOS EBDA area
[    0.447841] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.497167] Memory: 7814756K/8068928K available (10252K kernel code, 1243K rwdata, 3184K rodata, 1580K init, 2296K bss, 254172K reserved, 0K cma-reserved)
[    0.497424] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.497437] Kernel/User page tables isolation: enabled
[    0.518852] ftrace: allocating 31827 entries in 125 pages
[    0.556178] rcu: Hierarchical RCU implementation.
[    0.556182] rcu:   RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[    0.556185] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.564335] NR_IRQS: 33024, nr_irqs: 760, preallocated irqs: 16
[    0.567461] Console: colour VGA+ 80x25
[    0.567471] console [tty0] enabled
[    0.567515] ACPI: Core revision 20180810
[    0.568043] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.568058] hpet clockevent registered
[    0.568065] APIC: Switch to symmetric I/O mode setup
[    0.568202] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.569175] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.588068] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x23f4134b7cb, max_idle_ns: 440795318877 ns
[    0.588099] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.53 BogoMIPS (lpj=9977072)
[    0.588105] pid_max: default: 32768 minimum: 301
[    0.588183] Security Framework initialized
[    0.588186] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.588231] AppArmor: AppArmor initialized
[    0.590940] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.592286] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.592351] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.592396] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.592909] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.592911] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.592921] mce: CPU supports 7 MCE banks
[    0.592941] CPU0: Thermal monitoring enabled (TM1)
[    0.592970] process: using mwait in idle threads
[    0.592977] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[    0.592978] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[    0.592982] Spectre V2 : Mitigation: Full generic retpoline
[    0.592983] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.592985] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.593001] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.593003] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[    0.593005] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.593083] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.603426] Freeing SMP alternatives memory: 24K
[    0.608216] TSC deadline timer enabled
[    0.608222] smpboot: CPU0: Intel(R) Core(TM) i5-4300U CPU @ 1.90GHz (family: 0x6, model: 0x45, stepping: 0x1)
[    0.608447] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.608586] ... version:                3
[    0.608588] ... bit width:              48
[    0.608589] ... generic registers:      4
[    0.608591] ... value mask:             0000ffffffffffff
[    0.608593] ... max period:             00007fffffffffff
[    0.608594] ... fixed-purpose events:   3
[    0.608595] ... event mask:             000000070000000f
[    0.608680] rcu: Hierarchical SRCU implementation.
[    0.609659] random: crng done (trusting CPU's manufacturer)
[    0.611162] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.611316] smp: Bringing up secondary CPUs ...
[    0.611492] x86: Booting SMP configuration:
[    0.611495] .... node  #0, CPUs:      #1
[    0.612459] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[    0.612459]  #2 #3
[    0.613320] smp: Brought up 1 node, 4 CPUs
[    0.613320] smpboot: Max logical packages: 2
[    0.613320] smpboot: Total of 4 processors activated (19954.14 BogoMIPS)
[    0.616609] devtmpfs: initialized
[    0.616609] x86/mm: Memory block size: 128MB
[    0.617800] PM: Registering ACPI NVS region [mem 0xdcd3f000-0xdce7efff] (1310720 bytes)
[    0.617800] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.617800] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.617800] pinctrl core: initialized pinctrl subsystem
[    0.617800] NET: Registered protocol family 16
[    0.617800] audit: initializing netlink subsys (disabled)
[    0.617800] audit: type=2000 audit(1564678872.048:1): state=initialized audit_enabled=0 res=1
[    0.617800] cpuidle: using governor ladder
[    0.617800] cpuidle: using governor menu
[    0.617800] Detected 1 PCC Subspaces
[    0.617800] Registering PCC driver as Mailbox controller
[    0.617800] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.617800] ACPI: bus type PCI registered
[    0.617800] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.620365] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.620392] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.620408] PCI: Using configuration type 1 for base access
[    0.620463] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.622102] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.622102] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.622102] ACPI: Added _OSI(Module Device)
[    0.622102] ACPI: Added _OSI(Processor Device)
[    0.622102] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.622102] ACPI: Added _OSI(Processor Aggregator Device)
[    0.622102] ACPI: Added _OSI(Linux-Dell-Video)
[    0.622102] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.622102] ACPI: EC: EC started
[    0.622102] ACPI: EC: interrupt blocked
[    0.622102] ACPI: \: Used as first EC
[    0.622102] ACPI: \: GPE=0x25, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.622102] ACPI: \: Used as boot ECDT EC to handle transactions
[    0.653575] ACPI: 10 ACPI AML tables successfully acquired and loaded
[    0.657092] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.665554] ACPI Error: Needed type [Reference], found [Integer] 00000000c2bc531f (20180810/exresop-69)
[    0.665648] ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20180810/dswexec-427)
[    0.665739] ACPI Error: Method parse/execution failed \_PR.CPU0._PDC, AE_AML_OPERAND_TYPE (20180810/psparse-516)
[    0.666507] ACPI: Dynamic OEM Table Load:
[    0.666530] ACPI: SSDT 0xFFFF8E48D4DAA800 0005AA (v01 PmRef  ApIst    00003000 INTL 20120711)
[    0.667698] ACPI: Dynamic OEM Table Load:
[    0.667716] ACPI: SSDT 0xFFFF8E48D4DBA600 000119 (v01 PmRef  ApCst    00003000 INTL 20120711)
[    0.669671] ACPI: Interpreter enabled
[    0.669736] ACPI: (supports S0 S3 S4 S5)
[    0.669738] ACPI: Using IOAPIC for interrupt routing
[    0.669793] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.670394] ACPI: Enabled 6 GPEs in block 00 to 7F
[    0.677049] ACPI: Power Resource [PUBS] (on)
[    0.677366] acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1)
[    0.684451] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[    0.684636] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11)
[    0.684814] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11)
[    0.684990] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 9 10 11)
[    0.685164] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[    0.685302] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[    0.685478] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 *10 11)
[    0.685652] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 *6 7 9 10 11)
[    0.685875] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[    0.685883] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.686153] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug PCIeCapability LTR]
[    0.686270] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
[    0.686275] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[    0.686278] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
[    0.686281] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
[    0.686652] PCI host bridge to bus 0000:00
[    0.686657] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.686661] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.686664] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.686667] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfebfffff window]
[    0.686669] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff window]
[    0.686673] pci_bus 0000:00: root bus resource [bus 00-3f]
[    0.686690] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
[    0.686894] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
[    0.686924] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit]
[    0.686939] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.686950] pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
[    0.687135] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
[    0.687159] pci 0000:00:03.0: reg 0x10: [mem 0xf0630000-0xf0633fff 64bit]
[    0.687382] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
[    0.687415] pci 0000:00:14.0: reg 0x10: [mem 0xf0620000-0xf062ffff 64bit]
[    0.687512] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.687658] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
[    0.687694] pci 0000:00:16.0: reg 0x10: [mem 0xf0639000-0xf063901f 64bit]
[    0.687800] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.687928] pci 0000:00:16.3: [8086:9c3d] type 00 class 0x070002
[    0.687958] pci 0000:00:16.3: reg 0x10: [io  0x30b0-0x30b7]
[    0.687972] pci 0000:00:16.3: reg 0x14: [mem 0xf063f000-0xf063ffff]
[    0.688203] pci 0000:00:19.0: [8086:155a] type 00 class 0x020000
[    0.688233] pci 0000:00:19.0: reg 0x10: [mem 0xf0600000-0xf061ffff]
[    0.688246] pci 0000:00:19.0: reg 0x14: [mem 0xf063e000-0xf063efff]
[    0.688258] pci 0000:00:19.0: reg 0x18: [io  0x3080-0x309f]
[    0.688351] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.688492] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
[    0.688523] pci 0000:00:1b.0: reg 0x10: [mem 0xf0634000-0xf0637fff 64bit]
[    0.688632] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.688767] pci 0000:00:1c.0: [8086:9c1a] type 01 class 0x060400
[    0.688889] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.689138] pci 0000:00:1c.1: [8086:9c14] type 01 class 0x060400
[    0.689265] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.689509] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
[    0.689542] pci 0000:00:1d.0: reg 0x10: [mem 0xf063d000-0xf063d3ff]
[    0.689671] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.689817] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
[    0.690099] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
[    0.690127] pci 0000:00:1f.2: reg 0x10: [io  0x30a8-0x30af]
[    0.690139] pci 0000:00:1f.2: reg 0x14: [io  0x30bc-0x30bf]
[    0.690151] pci 0000:00:1f.2: reg 0x18: [io  0x30a0-0x30a7]
[    0.690163] pci 0000:00:1f.2: reg 0x1c: [io  0x30b8-0x30bb]
[    0.690175] pci 0000:00:1f.2: reg 0x20: [io  0x3060-0x307f]
[    0.690187] pci 0000:00:1f.2: reg 0x24: [mem 0xf063c000-0xf063c7ff]
[    0.690247] pci 0000:00:1f.2: PME# supported from D3hot
[    0.690375] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
[    0.690404] pci 0000:00:1f.3: reg 0x10: [mem 0xf0638000-0xf06380ff 64bit]
[    0.690436] pci 0000:00:1f.3: reg 0x20: [io  0xefa0-0xefbf]
[    0.690707] pci 0000:02:00.0: [10ec:5227] type 00 class 0xff0000
[    0.690803] pci 0000:02:00.0: reg 0x10: [mem 0xf0500000-0xf0500fff]
[    0.691313] pci 0000:02:00.0: supports D1 D2
[    0.691315] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.691614] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.691623] pci 0000:00:1c.0:   bridge window [mem 0xf0500000-0xf05fffff]
[    0.691910] pci 0000:03:00.0: [8086:08b2] type 00 class 0x028000
[    0.692310] pci 0000:03:00.0: reg 0x10: [mem 0xf0400000-0xf0401fff 64bit]
[    0.692741] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    0.693408] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.693417] pci 0000:00:1c.1:   bridge window [mem 0xf0400000-0xf04fffff]
[    0.695636] ACPI: EC: interrupt unblocked
[    0.695650] ACPI: EC: event unblocked
[    0.695661] ACPI: \_SB_.PCI0.LPC_.EC__: GPE=0x25, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.695665] ACPI: \_SB_.PCI0.LPC_.EC__: Used as boot DSDT EC to handle transactions and events
[    0.695803] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.695803] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.695803] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.695803] vgaarb: loaded
[    0.695803] pps_core: LinuxPPS API ver. 1 registered
[    0.695803] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.695803] PTP clock support registered
[    0.695803] EDAC MC: Ver: 3.0.0
[    0.696279] PCI: Using ACPI for IRQ routing
[    0.698362] PCI: pci_cache_line_size set to 64 bytes
[    0.698703] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
[    0.698706] e820: reserve RAM buffer [mem 0xce234000-0xcfffffff]
[    0.698709] e820: reserve RAM buffer [mem 0x21e600000-0x21fffffff]
[    0.698927] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.698927] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.701117] clocksource: Switched to clocksource tsc-early
[    0.723441] VFS: Disk quotas dquot_6.6.0
[    0.723479] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.723720] AppArmor: AppArmor Filesystem Enabled
[    0.723759] pnp: PnP ACPI init
[    0.724740] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.724746] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
[    0.724749] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
[    0.724752] system 00:00: [mem 0x000c8000-0x000cbfff] could not be reserved
[    0.724755] system 00:00: [mem 0x000cc000-0x000cffff] could not be reserved
[    0.724758] system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved
[    0.724761] system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved
[    0.724764] system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved
[    0.724767] system 00:00: [mem 0x000dc000-0x000dffff] has been reserved
[    0.724770] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[    0.724773] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[    0.724776] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[    0.724779] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[    0.724782] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[    0.724786] system 00:00: [mem 0x00100000-0xdf9fffff] could not be reserved
[    0.724790] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
[    0.724793] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
[    0.724805] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.725034] pnp 00:01: [Firmware Bug]: PNP resource [mem 0xfed10000-0xfed13fff] covers only part of 0000:00:00.0 Intel MCH; extending to [mem 0xfed10000-0xfed17fff]
[    0.725076] system 00:01: [io  0x1800-0x189f] has been reserved
[    0.725080] system 00:01: [io  0x0800-0x087f] has been reserved
[    0.725083] system 00:01: [io  0x0880-0x08ff] has been reserved
[    0.725086] system 00:01: [io  0x0900-0x097f] has been reserved
[    0.725089] system 00:01: [io  0x0980-0x09ff] has been reserved
[    0.725092] system 00:01: [io  0x0a00-0x0a7f] has been reserved
[    0.725095] system 00:01: [io  0x0a80-0x0aff] has been reserved
[    0.725098] system 00:01: [io  0x0b00-0x0b7f] has been reserved
[    0.725101] system 00:01: [io  0x0b80-0x0bff] has been reserved
[    0.725104] system 00:01: [io  0x15e0-0x15ef] has been reserved
[    0.725107] system 00:01: [io  0x1600-0x167f] has been reserved
[    0.725111] system 00:01: [io  0x1640-0x165f] has been reserved
[    0.725115] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.725119] system 00:01: [mem 0xfffff000-0xffffffff] has been reserved
[    0.725122] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.725126] system 00:01: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.725129] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.725132] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.725135] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
[    0.725144] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.725268] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.725315] pnp 00:03: Plug and Play ACPI device, IDs LEN0071 PNP0303 (active)
[    0.725355] pnp 00:04: Plug and Play ACPI device, IDs LEN0035 PNP0f13 (active)
[    0.725449] pnp 00:05: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
[    0.726475] pnp: PnP ACPI: found 6 devices
[    0.734034] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.734073] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.734082] pci 0000:00:1c.0:   bridge window [mem 0xf0500000-0xf05fffff]
[    0.734094] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.734101] pci 0000:00:1c.1:   bridge window [mem 0xf0400000-0xf04fffff]
[    0.734116] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.734119] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.734122] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.734125] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfebfffff window]
[    0.734128] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff window]
[    0.734131] pci_bus 0000:02: resource 1 [mem 0xf0500000-0xf05fffff]
[    0.734134] pci_bus 0000:03: resource 1 [mem 0xf0400000-0xf04fffff]
[    0.734359] NET: Registered protocol family 2
[    0.734690] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
[    0.734756] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.735012] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.735267] TCP: Hash tables configured (established 65536 bind 65536)
[    0.735348] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.735407] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.735550] NET: Registered protocol family 1
[    0.735560] NET: Registered protocol family 44
[    0.735583] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.736427] PCI: CLS 64 bytes, default 64
[    0.736520] Unpacking initramfs...
[    2.391161] Freeing initrd memory: 34960K
[    2.391189] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    2.391193] software IO TLB: mapped [mem 0xca234000-0xce234000] (64MB)
[    2.392860] Initialise system trusted keyrings
[    2.392877] Key type blacklist registered
[    2.392977] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[    2.396112] zbud: loaded
[    2.396822] pstore: using deflate compression
[    2.868552] Key type asymmetric registered
[    2.868556] Asymmetric key parser 'x509' registered
[    2.868591] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    2.868668] io scheduler noop registered
[    2.868671] io scheduler deadline registered
[    2.868753] io scheduler cfq registered (default)
[    2.868755] io scheduler mq-deadline registered
[    2.869587] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    2.869627] intel_idle: MWAIT substates: 0x11142120
[    2.869629] intel_idle: v0.4.1 model 0x45
[    2.870203] intel_idle: lapic_timer_reliable_states 0xffffffff
[    2.870937] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    2.892204] 0000:00:16.3: ttyS0 at I/O 0x30b0 (irq = 17, base_baud = 115200) is a 16550A
[    2.892717] Linux agpgart interface v0.103
[    2.892841] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    2.892842] AMD IOMMUv2 functionality not available on this system
[    2.893595] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    2.895174] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.895183] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.895517] mousedev: PS/2 mouse device common for all mice
[    2.895593] rtc_cmos 00:02: RTC can wake from S4
[    2.895846] rtc_cmos 00:02: registered as rtc0
[    2.895897] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    2.895924] intel_pstate: Intel P-state driver initializing
[    2.896261] ledtrig-cpu: registered to indicate activity on CPUs
[    2.896962] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    2.897499] NET: Registered protocol family 10
[    2.910175] Segment Routing with IPv6
[    2.910193] mip6: Mobile IPv6
[    2.910195] NET: Registered protocol family 17
[    2.910227] mpls_gso: MPLS GSO support
[    2.910439] microcode: sig=0x40651, pf=0x40, revision=0x24
[    2.910502] microcode: Microcode Update Driver: v2.2.
[    2.910511] sched_clock: Marking stable (2907242124, 3256783)->(2921271162, -10772255)
[    2.910650] registered taskstats version 1
[    2.910651] Loading compiled-in X.509 certificates
[    2.942350] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[    2.942366] Loaded X.509 cert 'Debian Secure Boot Signer: 00a7468def'
[    2.942382] zswap: loaded using pool lzo/zbud
[    2.942448] AppArmor: AppArmor sha1 policy hashing enabled
[    2.942860] rtc_cmos 00:02: setting system clock to 2019-08-01 17:01:15 UTC (1564678875)
[    3.123936] Freeing unused kernel image memory: 1580K
[    3.156156] Write protecting the kernel read-only data: 16384k
[    3.157962] Freeing unused kernel image memory: 2028K
[    3.158266] Freeing unused kernel image memory: 912K
[    3.173115] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    3.173116] x86/mm: Checking user space page tables
[    3.178625] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    3.178627] Run /init as init process
[    3.224362] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[    3.224381] ACPI: Lid Switch [LID]
[    3.224435] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[    3.224444] ACPI: Sleep Button [SLPB]
[    3.224515] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[    3.224522] ACPI: Power Button [PWRF]
[    3.232713] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[    3.232809] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[    3.247135] thermal LNXTHERM:00: registered as thermal_zone0
[    3.247138] ACPI: Thermal Zone [THM0] (42 C)
[    3.253791] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    3.253792] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    3.253950] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    3.257117] i801_smbus 0000:00:1f.3: SPD Write Disable is set
[    3.257145] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    3.268057] ACPI: bus type USB registered
[    3.268293] usbcore: registered new interface driver usbfs
[    3.268304] usbcore: registered new interface driver hub
[    3.268328] usbcore: registered new device driver usb
[    3.269929] SCSI subsystem initialized
[    3.284870] cryptd: max_cpu_qlen set to 1000
[    3.291241] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.292243] ehci-pci: EHCI PCI platform driver
[    3.292397] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    3.292403] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    3.292415] ehci-pci 0000:00:1d.0: debug port 2
[    3.296311] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    3.299079] AVX2 version of gcm_enc/dec engaged.
[    3.299080] AES CTR mode by8 optimization enabled
[    3.303559] libata version 3.00 loaded.
[    3.304579] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf063d000
[    3.312910] ahci 0000:00:1f.2: version 3.0
[    3.320090] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    3.320163] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[    3.320165] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.320166] usb usb1: Product: EHCI Host Controller
[    3.320168] usb usb1: Manufacturer: Linux 4.19.0-5-amd64 ehci_hcd
[    3.320169] usb usb1: SerialNumber: 0000:00:1d.0
[    3.320446] hub 1-0:1.0: USB hub found
[    3.320454] hub 1-0:1.0: 3 ports detected
[    3.320656] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    3.320664] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    3.321708] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x000000000004b810
[    3.321712] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    3.321881] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[    3.321883] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.321884] usb usb2: Product: xHCI Host Controller
[    3.321885] usb usb2: Manufacturer: Linux 4.19.0-5-amd64 xhci-hcd
[    3.321887] usb usb2: SerialNumber: 0000:00:14.0
[    3.322011] hub 2-0:1.0: USB hub found
[    3.322023] hub 2-0:1.0: 9 ports detected
[    3.323338] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x1 impl SATA mode
[    3.323340] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
[    3.323855] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    3.323859] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    3.323863] xhci_hcd 0000:00:14.0: Host supports USB 3.0  SuperSpeed
[    3.323910] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
[    3.323912] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.323914] usb usb3: Product: xHCI Host Controller
[    3.323915] usb usb3: Manufacturer: Linux 4.19.0-5-amd64 xhci-hcd
[    3.323916] usb usb3: SerialNumber: 0000:00:14.0
[    3.324060] hub 3-0:1.0: USB hub found
[    3.324069] hub 3-0:1.0: 4 ports detected
[    3.324261] scsi host0: ahci
[    3.326358] scsi host1: ahci
[    3.326686] scsi host2: ahci
[    3.326762] ata1: SATA max UDMA/133 abar m2048@0xf063c000 port 0xf063c100 irq 42
[    3.326763] ata2: DUMMY
[    3.326764] ata3: DUMMY
[    3.380304] [drm] Replacing VGA console driver
[    3.381433] Console: switching to colour dummy device 80x25
[    3.381948] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    3.381949] [drm] Driver supports precise vblank timestamp query.
[    3.381968] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    3.420081] tsc: Refined TSC clocksource calibration: 2494.226 MHz
[    3.420087] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f3eb3743e, max_idle_ns: 440795257847 ns
[    3.420096] clocksource: Switched to clocksource tsc
[    3.471719] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[    3.550346] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 28:d2:44:f3:f6:7a
[    3.550347] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[    3.550387] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: 1000FF-0FF
[    3.551221] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[    3.566449] [drm] Initialized i915 1.6.0 20180719 for 0000:00:02.0 on minor 0
[    3.566806] ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
[    3.567130] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[    3.638936] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    3.640953] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[    3.640955] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    3.640957] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    3.641007] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[    3.641206] ata1.00: ATA-8: LITEONIT LCS-128M6S, DC72205, max UDMA/133
[    3.641207] ata1.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 32), AA
[    3.641504] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[    3.641506] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    3.641507] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    3.641552] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[    3.641703] ata1.00: configured for UDMA/133
[    3.641827] scsi 0:0:0:0: Direct-Access     ATA      LITEONIT LCS-128 205  PQ: 0 ANSI: 5
[    3.660105] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    3.664093] usb 2-7: new full-speed USB device number 2 using xhci_hcd
[    3.762000] fbcon: inteldrmfb (fb0) is primary device
[    3.766047] psmouse serio1: synaptics: queried max coordinates: x [..5710], y [..4696]
[    3.796817] psmouse serio1: synaptics: queried min coordinates: x [1232..], y [1156..]
[    3.796823] psmouse serio1: synaptics: Trying to set up SMBus access
[    3.813590] usb 2-7: New USB device found, idVendor=8087, idProduct=07dc, bcdDevice= 0.01
[    3.813593] usb 2-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.816547] usb 1-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.04
[    3.816550] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.816955] hub 1-1:1.0: USB hub found
[    3.817001] hub 1-1:1.0: 8 ports detected
[    3.940183] usb 2-8: new high-speed USB device number 3 using xhci_hcd
[    4.159266] usb 2-8: New USB device found, idVendor=04ca, idProduct=7035, bcdDevice=10.04
[    4.159270] usb 2-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.159273] usb 2-8: Product: Integrated Camera
[    4.159275] usb 2-8: Manufacturer: J31E8T1R9
[    4.872294] Console: switching to colour frame buffer device 170x48
[    4.893534] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    4.927695] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[    4.927704] sd 0:0:0:0: [sda] Write Protect is off
[    4.927705] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.927715] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.931435]  sda: sda1 sda2 < sda5 >
[    4.931830] sd 0:0:0:0: [sda] Attached SCSI disk
[    5.106346] PM: Image not found (code -22)
[    5.319527] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    5.442446] systemd[1]: Inserted module 'autofs4'
[    5.458096] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    5.476292] systemd[1]: Detected architecture x86-64.
[    5.480268] systemd[1]: Set hostname to <arthur>.
[    5.589104] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    5.589181] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    5.589273] systemd[1]: Listening on udev Control Socket.
[    5.589391] systemd[1]: Listening on Journal Socket.
[    5.591109] systemd[1]: Starting Load Kernel Modules...
[    5.591317] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    5.591441] systemd[1]: Listening on Journal Socket (/dev/log).
[    5.607326] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    5.612691] lp: driver loaded but no devices found
[    5.617648] ppdev: user-space parallel port driver
[    5.766075] systemd-journald[275]: Received request to flush runtime journal from PID 1
[    5.814877] ACPI: AC Adapter [AC] (off-line)
[    5.815484] battery: ACPI: Battery Slot [BAT0] (battery absent)
[    5.841898] battery: ACPI: Battery Slot [BAT1] (battery present)
[    5.883440] iTCO_vendor_support: vendor-support=0
[    5.887851] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    5.887907] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860)
[    5.888500] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    5.889336] Non-volatile memory driver v1.3
[    5.891867] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    5.898559] audit: type=1400 audit(1564678878.449:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="system_tor" pid=354 comm="apparmor_parser"
[    5.899427] audit: type=1400 audit(1564678878.449:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=352 comm="apparmor_parser"
[    5.899431] audit: type=1400 audit(1564678878.449:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=352 comm="apparmor_parser"
[    5.899433] audit: type=1400 audit(1564678878.449:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=352 comm="apparmor_parser"
[    5.901474] tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78)
[    5.903145] thinkpad_acpi: ThinkPad ACPI Extras v0.26
[    5.903147] thinkpad_acpi: http://ibm-acpi.sf.net/
[    5.903148] thinkpad_acpi: ThinkPad BIOS GIET95WW (2.45 ), EC unknown
[    5.903149] thinkpad_acpi: Lenovo ThinkPad X240, model 20AMS1J100
[    5.906948] input: PC Speaker as /devices/platform/pcspkr/input/input7
[    5.918768] audit: type=1400 audit(1564678878.469:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=353 comm="apparmor_parser"
[    5.919955] audit: type=1400 audit(1564678878.469:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=351 comm="apparmor_parser"
[    5.919959] audit: type=1400 audit(1564678878.469:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=351 comm="apparmor_parser"
[    5.919962] audit: type=1400 audit(1564678878.469:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=351 comm="apparmor_parser"
[    5.928326] thinkpad_acpi: radio switch found; radios are enabled
[    5.928345] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[    5.928345] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[    5.930914] rmi4_smbus 0-002c: registering SMbus-connected sensor
[    5.931886] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[    5.931887] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    5.931887] RAPL PMU: hw unit of domain package 2^-14 Joules
[    5.931888] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    5.931888] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    5.944114] audit: type=1400 audit(1564678878.497:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=370 comm="apparmor_parser"
[    5.951026] audit: type=1400 audit(1564678878.501:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=369 comm="apparmor_parser"
[    5.964383] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[    5.973939] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[    5.983922] rmi4_f01 rmi4-00.fn01: found RMI device, manufacturer: Synaptics, product: TM2749-001, fw id: 0
[    6.046187] input: Synaptics TM2749-001 as /devices/rmi4-00/input/input9
[    6.051785] media: Linux media interface: v0.10
[    6.061635] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    6.073556] thinkpad_acpi: battery 2 registered (start 0, stop 100)
[    6.073563] battery: new extension: ThinkPad Battery Extension
[    6.073622] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input8
[    6.096955] serio: RMI4 PS/2 pass-through port at rmi4-00.fn03
[    6.130379] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
[    6.130440] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
[    6.130496] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
[    6.130556] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14
[    6.130610] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15
[    6.165881] Intel(R) Wireless WiFi driver for Linux
[    6.165883] Copyright(c) 2003- 2015 Intel Corporation
[    6.167083] videodev: Linux video capture interface: v2.00
[    6.170624] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3232: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    6.170626] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    6.170628] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=2 (0x16/0x15/0x0/0x0/0x0)
[    6.170630] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[    6.170631] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[    6.170633] snd_hda_codec_realtek hdaudioC1D0:      Dock Mic=0x19
[    6.170635] snd_hda_codec_realtek hdaudioC1D0:      Mic=0x1a
[    6.170637] snd_hda_codec_realtek hdaudioC1D0:      Internal Mic=0x12
[    6.223016] iwlwifi 0000:03:00.0: firmware: direct-loading firmware iwlwifi-7260-17.ucode
[    6.223393] iwlwifi 0000:03:00.0: loaded firmware version 17.3216344376.0 op_mode iwlmvm
[    6.228696] Bluetooth: Core ver 2.22
[    6.228710] NET: Registered protocol family 31
[    6.228711] Bluetooth: HCI device and connection manager initialized
[    6.228714] Bluetooth: HCI socket layer initialized
[    6.228717] Bluetooth: L2CAP socket layer initialized
[    6.228722] Bluetooth: SCO socket layer initialized
[    6.259278] uvcvideo: Found UVC 1.00 device Integrated Camera (04ca:7035)
[    6.292615] usbcore: registered new interface driver btusb
[    6.298537] uvcvideo 2-8:1.0: Entity type for entity Extension 4 was not initialized!
[    6.298539] uvcvideo 2-8:1.0: Entity type for entity Extension 3 was not initialized!
[    6.298541] uvcvideo 2-8:1.0: Entity type for entity Processing 2 was not initialized!
[    6.298543] uvcvideo 2-8:1.0: Entity type for entity Camera 1 was not initialized!
[    6.298819] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.0/input/input17
[    6.300580] usbcore: registered new interface driver uvcvideo
[    6.300581] USB Video Class driver (1.1.1)
[    6.328532] Bluetooth: hci0: read Intel version: 370710018002030d00
[    6.328962] bluetooth hci0: firmware: direct-loading firmware intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[    6.328965] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[    6.345270] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16
[    6.347182] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input18
[    6.347249] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input19
[    6.347308] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input20
[    6.347364] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input21
[    6.349569] intel_rapl: Found RAPL domain package
[    6.349570] intel_rapl: Found RAPL domain core
[    6.349571] intel_rapl: Found RAPL domain uncore
[    6.349572] intel_rapl: Found RAPL domain dram
[    6.383423] Adding 8068092k swap on /dev/sda5.  Priority:-2 extents:1 across:8068092k SSFS
[    6.394756] usb 2-7: USB disconnect, device number 2
[    6.464135] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[    6.480632] iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless N 7260, REV=0x144
[    6.503583] iwlwifi 0000:03:00.0: base HW address: 28:b2:bd:9d:f4:b3
[    6.514405] input: TPPS/2 IBM TrackPoint as /devices/rmi4-00/rmi4-00.fn03/serio2/input/input10
[    6.546088] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    6.546090] Bluetooth: BNEP filters: protocol multicast
[    6.546093] Bluetooth: BNEP socket layer initialized
[    6.701218] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[    6.703596] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
[    6.776093] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[    6.988219] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[    6.995199] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[    7.229093] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[    7.530189] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[    7.612582] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[    8.314999] fuse init (API version 7.27)
[    8.408090] Bluetooth: hci0: command 0xfc8e tx timeout
[   10.991510] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   14.458916] wlp3s0: authenticate with 00:19:70:8d:39:9d
[   14.464017] wlp3s0: send auth to 00:19:70:8d:39:9d (try 1/3)
[   14.467277] wlp3s0: authenticated
[   14.468092] wlp3s0: associate with 00:19:70:8d:39:9d (try 1/3)
[   14.472208] wlp3s0: RX AssocResp from 00:19:70:8d:39:9d (capab=0x431 status=0 aid=2)
[   14.473832] wlp3s0: associated
[   14.515640] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[   16.408201] Bluetooth: hci0: sending Intel patch command (0xfc8e) failed (-110)
[   16.408255] Bluetooth: hci0: sending frame failed (-19)
[   18.424201] Bluetooth: hci0: Exiting manufacturer mode failed (-110)
[   18.424205] Bluetooth: hci0: command 0xfc11 tx timeout
[   84.583637] rfkill: input handler disabled
 

Hors ligne

#8 04-09-2019 18:53:29

metaphys
Membre
Inscription : 04-09-2019

Re : Touchpad inactif après sortie de veille

Salut,
Même problème chez moi. La solution pour éviter de redémarrer c'est:

 


sudo rmmod psmouse && sudo modprobe psmouse



Maintenant il faudrait voir comment modifier la sortie de vieille de systemd pour ajouter cette commande à la fin...

Hors ligne

#9 04-09-2019 19:04:20

metaphys
Membre
Inscription : 04-09-2019

Re : Touchpad inactif après sortie de veille

pour avoir systemd qui recharge le module psmouse en sortie de veille:

sudo echo '#!/bin/bash
if [ "${1}" == "pre" ]; then
    rmmod psmouse
elif [ "${1}" == "post" ]; then
    modprobe psmouse
fi'
> /lib/systemd/system-sleep/psmouse
sudo chmod +x /lib/systemd/system-sleep/psmouse
 

Hors ligne

#10 05-09-2019 11:48:11

art_clld
Membre
Distrib. : Debian 10 Buster
Noyau : Linux 4.19.0-5-amd64
(G)UI : Gnome
Inscription : 31-07-2019

Re : Touchpad inactif après sortie de veille

Merci pour la réponse.
Je copie-colle ça directement en une seule fois dans un terminal ?

Hors ligne

#11 30-09-2019 07:54:31

totocov
Membre
Distrib. : Debian 10 Buster
Noyau : Linux 4.19.0-6-amd64
(G)UI : Xfce4.12
Inscription : 29-04-2017

Re : Touchpad inactif après sortie de veille

Bonjour à tous,
j'ai le même souci mais j'ai remarqué une chose étonnante : à la sortie de veille, j'ai lightdm qui me demande mon mot de passe pour retourner dans ma session et à ce moment là, le touchpad marche (donc après la sortie de veille). C'est au retour à ma session (xfce4) que le touchpad ne fonctionne plus.
Activer ou désactiver le module psmouse ne change rien.

Hors ligne

#12 30-09-2019 08:20:19

smolski
quasi...modo
Lieu : AIN
Distrib. : backports (buster) 10
Noyau : Linux 4.19.0-8-amd64
(G)UI : gnome
Inscription : 21-10-2008

Re : Touchpad inactif après sortie de veille

Salut totocov et bienvenue sur df !

Il faut que chacun ouvre son post car des problèmes similaires répondent rarement aux mêmes résolutions.
Voir le choco df ci-dessous :

Voir le tuto : On ne bernacle pas le post d'autrui. Plop !

"Théo et Adama te rappellent pourquoi Zyed et Bouna couraient…"
"L'utopie ne signifie pas l'irréalisable, mais l'irréalisée." - T Monod (source :  La zone de Siné)
"Je peux rire de tout mais pas avec n'importe qui." - P Desproges
"saque eud dun" (patois chtimi : fonce dedans)

Hors ligne

#13 30-09-2019 09:31:47

art_clld
Membre
Distrib. : Debian 10 Buster
Noyau : Linux 4.19.0-5-amd64
(G)UI : Gnome
Inscription : 31-07-2019

Re : Touchpad inactif après sortie de veille

Bonjour totocov,
Mon problème est que lightdm ne se lance pas à la sortie de veille. Debian se réveille directement sur le bureau, sans demande de mot de passe (alors que je lui demande, dans les paramètres, de se verrouiller lors de la veille).
C'est un autre problème, mais j'ai l'impression que c'est lié...

Hors ligne

#14 30-09-2019 10:05:19

totocov
Membre
Distrib. : Debian 10 Buster
Noyau : Linux 4.19.0-6-amd64
(G)UI : Xfce4.12
Inscription : 29-04-2017

Re : Touchpad inactif après sortie de veille

Désolé Smolski, je me suis mal exprimé, c'était plus un message pour savoir si les symptômes étaient les mêmes pas pour ouvrir un nouveau post.

Hors ligne

Pied de page des forums