Debian Debian-France Debian-Facile Debian-fr.org Debian-fr.xyz Debian ? Communautés

Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#1 30-05-2021 11:08:29

Maknho
Membre
Distrib. : Debian GNU/Linux 10.4
Noyau : Linux 4.19.0-9-amd64
(G)UI : Xfce
Inscription : 01-06-2020

[RESOLU] [DD : Erreur entrée/sortie] : suite à interruption rsync

Bonjour à tous,

1) Contexte :

il y a quelques jours, j'ai partitionné un nouveau DD pour mon NAS afin d'avoir de l'espace pour mieux tester rsync.

J'ai formaté et monté deux partitions (/dev/sdd1 et /dev/sdd2), que j'ai chiffré.

Je lance alors un job rsync sur /dev/sdd1 ; que j'interromps quelques heures après, brusquement, en éteignant (avec le bouton on/off) le NAS (qui me sert de serveur de sauvegarde essentiellement).

Je commence alors à avoir des problèmes d'entrée/sortie quand je tente d'accéder à /dev/sdd1.

2) Etat des lieux :

2.1) Smartctl :

J'ai fait 2 tests smartctl (un court et un long) qui ne donne rien apparemment :

- sortie de : smartctl -l selftest  /dev/sdd                                                sad 1 21-05-30 - 10:48:33


smartctl 6.6 2017-11-05 r4594 [aarch64-linux-5.10.35-rockchip64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF READ SMART DATA SECTION ===
SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed without error       00%        41         -
# 2  Short offline       Completed without error       00%        30         -

2.2) Essai d'écriture de zéro sur toute la partition problématique (/dev/sdd1, qui fait 2To) :

# dd if=/dev/zero of=/dev/sdd1                                                       21-05-30 - 10:25:57
dd: écriture vers '/dev/sdd1': Erreur d'entrée/sortie
21082193+0 enregistrements lus
21082192+0 enregistrements écrits
10794082304 octets (11 GB, 10 GiB) copiés, 1349.78 s, 8.0 MB/s

2.3) La seconde partition du disque (/dev/sdd2 ; qui fait 4To) est parfaitement fonctionnelle et accessible.


3) Questions :

3.1) Est-ce que le point 2.3) peut faire penser que la partition /dev/sdd1 est récupérable ?

3.2) Avez-vous en tête des tests que je devrais effectuer avant de renvoyer le DD au constructeur ?

D'avance merci beaucoup

Dernière modification par Maknho (30-05-2021 21:16:08)

Hors ligne

#2 30-05-2021 11:19:11

raleur
Membre
Inscription : 03-10-2014

Re : [RESOLU] [DD : Erreur entrée/sortie] : suite à interruption rsync

Il serait intéressant de voir la sortie complète de "smartctl -a /dev/sdd" avec les attributs et les logs, ainsi que les messages du noyau après une erreur d'entrée-sortie. C'est peut-être un secteur défectueux causé par l'extinction brutale pendant une écriture.

Dernière modification par raleur (30-05-2021 11:20:57)


Il vaut mieux montrer que raconter.

Hors ligne

#3 30-05-2021 11:25:36

Maknho
Membre
Distrib. : Debian GNU/Linux 10.4
Noyau : Linux 4.19.0-9-amd64
(G)UI : Xfce
Inscription : 01-06-2020

Re : [RESOLU] [DD : Erreur entrée/sortie] : suite à interruption rsync

Bonjour raleur,

je te remercie de me répondre. Tu remarqueras qu'en ce moment de mauvaises manips me font faire plein de bêtises smile

1) Sortie complète de "smartctl -a /dev/sdd" :

smartctl 6.6 2017-11-05 r4594 [aarch64-linux-5.10.35-rockchip64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     WDC WD6003FFBX-68MU3N0
Serial Number:    V9HXEXHL
LU WWN Device Id: 5 000cca 0bddb0625
Firmware Version: 83.00A83
User Capacity:    6,001,175,126,016 bytes [6.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Form Factor:      3.5 inches
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ACS-2, ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.2, 6.0 Gb/s (current: 1.5 Gb/s)
Local Time is:    Sun May 30 11:22:37 2021 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x80) Offline data collection activity
                                        was never started.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                (   87) seconds.
Offline data collection
capabilities:                    (0x5b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        ( 636) minutes.
SCT capabilities:              (0x003d) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0004   132   132   054    Old_age   Offline      -       96
  3 Spin_Up_Time            0x0007   253   253   024    Pre-fail  Always       -       53 (Average 54)
  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       244
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000a   100   100   067    Old_age   Always       -       0
  8 Seek_Time_Performance   0x0004   128   128   020    Old_age   Offline      -       18
  9 Power_On_Hours          0x0012   100   100   000    Old_age   Always       -       43
10 Spin_Retry_Count        0x0012   100   100   060    Old_age   Always       -       0
12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       243
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       264
193 Load_Cycle_Count        0x0012   100   100   000    Old_age   Always       -       264
194 Temperature_Celsius     0x0002   162   162   000    Old_age   Always       -       37 (Min/Max 25/41)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       0

SMART Error Log Version: 1
ATA Error Count: 1
        CR = Command Register [HEX]
        FR = Features Register [HEX]
        SC = Sector Count Register [HEX]
        SN = Sector Number Register [HEX]
        CL = Cylinder Low Register [HEX]
        CH = Cylinder High Register [HEX]
        DH = Device/Head Register [HEX]
        DC = Device Command Register [HEX]
        ER = Error register [HEX]
        ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 1 occurred at disk power-on lifetime: 30 hours (1 days + 6 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  10 53 00 00 00 00 00

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  e0 00 00 00 00 00 a0 08      00:00:33.956  STANDBY IMMEDIATE
  ea 00 00 00 00 00 a0 08      00:00:33.327  FLUSH CACHE EXT
  ea 00 00 00 00 00 a0 08      00:00:30.150  FLUSH CACHE EXT
  61 08 28 00 28 89 40 08      00:00:30.150  WRITE FPDMA QUEUED
  ea 00 00 00 00 00 a0 08      00:00:30.128  FLUSH CACHE EXT

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed without error       00%        41         -
# 2  Short offline       Completed without error       00%        30         -

SMART Selective self-test log data structure revision number 1
SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.


Je ne vois pas grand chose raleur. Que regardes-tu spécifiquement ?

[EDIT] : je vois ça :

Error 1 occurred at disk power-on lifetime: 30 hours (1 days + 6 hours)
  When the command that caused the error occurred, the device was active or idle.



2) Obtenir les messages du noyau après une erreur d'entrée-sortie.

Comment j'obtiens ça raleur ?

Dernière modification par Maknho (30-05-2021 11:32:06)

Hors ligne

#4 30-05-2021 12:11:34

raleur
Membre
Inscription : 03-10-2014

Re : [RESOLU] [DD : Erreur entrée/sortie] : suite à interruption rsync

Maknho a écrit :

Que regardes-tu spécifiquement ?


Certains attributs indiquant des secteurs défectueux (il n'y en a aucun), les logs d'erreur.

Maknho a écrit :

Error 1 occurred at disk power-on lifetime: 30 hours (1 days + 6 hours)


C'était il y a "longtemps" (à 30 heures de fonctionnement, alors que le disque a actuellement 43 heures). Apparemment ce disque est neuf.

Maknho a écrit :

Comment j'obtiens ça raleur ?


Avec dmesg. On peut n'afficher que les N dernières lignes avec "| tail -n N", il faut remonter assez haut pour ne pas couper des messages utiles mais pas trop haut pour ne pas s'encombrer de messages inutiles.


Il vaut mieux montrer que raconter.

Hors ligne

#5 30-05-2021 15:18:41

Maknho
Membre
Distrib. : Debian GNU/Linux 10.4
Noyau : Linux 4.19.0-9-amd64
(G)UI : Xfce
Inscription : 01-06-2020

Re : [RESOLU] [DD : Erreur entrée/sortie] : suite à interruption rsync

1)

C'était il y a "longtemps" (à 30 heures de fonctionnement, alors que le disque a actuellement 43 heures). Apparemment ce disque est neuf.



Si c'était la veille cela correspond avec l'arrêt "sauvage" pendant rsync.

2) Sortie : dmesg
[...]
[ 2174.748143] buffer_io_error: 998 callbacks suppressed
[ 2174.748146] Buffer I/O error on dev sdd1, logical block 3863801, lost async page write
[ 2174.748167] Buffer I/O error on dev sdd1, logical block 3863802, lost async page write
[ 2174.748172] Buffer I/O error on dev sdd1, logical block 3863803, lost async page write
[ 2174.748178] Buffer I/O error on dev sdd1, logical block 3863804, lost async page write
[ 2174.748184] Buffer I/O error on dev sdd1, logical block 3863805, lost async page write
[ 2174.748189] Buffer I/O error on dev sdd1, logical block 3863806, lost async page write
[ 2174.748195] Buffer I/O error on dev sdd1, logical block 3863807, lost async page write
[ 2174.748201] Buffer I/O error on dev sdd1, logical block 3863808, lost async page write
[ 2174.748207] Buffer I/O error on dev sdd1, logical block 3863809, lost async page write
[ 2174.748212] Buffer I/O error on dev sdd1, logical block 3863810, lost async page write
[ 2174.748603] sd 3:0:0:0: [sdd] tag#1 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 cmd_age=74s
[ 2174.748608] sd 3:0:0:0: [sdd] tag#1 Sense Key : 0x5 [current]
[ 2174.748612] sd 3:0:0:0: [sdd] tag#1 ASC=0x21 ASCQ=0x4
[ 2174.748617] sd 3:0:0:0: [sdd] tag#1 CDB: opcode=0x8a 8a 00 00 00 00 00 01 d7 b5 08 00 00 05 40 00 00
[ 2174.748622] blk_update_request: I/O error, dev sdd, sector 30913800 op 0x1:(WRITE) flags 0x104000 phys_seg 168 prio class 0
[ 2174.749049] sd 3:0:0:0: [sdd] tag#2 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 cmd_age=74s
[ 2174.749054] sd 3:0:0:0: [sdd] tag#2 Sense Key : 0x5 [current]
[ 2174.749058] sd 3:0:0:0: [sdd] tag#2 ASC=0x21 ASCQ=0x4
[ 2174.749062] sd 3:0:0:0: [sdd] tag#2 CDB: opcode=0x8a 8a 00 00 00 00 00 01 d7 bf 88 00 00 05 40 00 00
[ 2174.749068] blk_update_request: I/O error, dev sdd, sector 30916488 op 0x1:(WRITE) flags 0x104000 phys_seg 168 prio class 0
[ 2174.749478] sd 3:0:0:0: [sdd] tag#3 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 cmd_age=74s
[ 2174.749483] sd 3:0:0:0: [sdd] tag#3 Sense Key : 0x5 [current]
[ 2174.749487] sd 3:0:0:0: [sdd] tag#3 ASC=0x21 ASCQ=0x4
[ 2174.749491] sd 3:0:0:0: [sdd] tag#3 CDB: opcode=0x8a 8a 00 00 00 00 00 01 d7 c4 c8 00 00 05 40 00 00
[ 2174.749496] blk_update_request: I/O error, dev sdd, sector 30917832 op 0x1:(WRITE) flags 0x104000 phys_seg 168 prio class 0
[ 2174.749898] sd 3:0:0:0: [sdd] tag#4 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 cmd_age=74s
[ 2174.749903] sd 3:0:0:0: [sdd] tag#4 Sense Key : 0x5 [current]
[ 2174.749907] sd 3:0:0:0: [sdd] tag#4 ASC=0x21 ASCQ=0x4
[ 2174.749912] sd 3:0:0:0: [sdd] tag#4 CDB: opcode=0x8a 8a 00 00 00 00 00 01 d7 ca 08 00 00 05 40 00 00
[ 2174.749916] blk_update_request: I/O error, dev sdd, sector 30919176 op 0x1:(WRITE) flags 0x104000 phys_seg 168 prio class 0
[ 2174.750297] sd 3:0:0:0: [sdd] tag#5 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 cmd_age=74s
[ 2174.750302] sd 3:0:0:0: [sdd] tag#5 Sense Key : 0x5 [current]
[ 2174.750306] sd 3:0:0:0: [sdd] tag#5 ASC=0x21 ASCQ=0x4
[ 2174.750310] sd 3:0:0:0: [sdd] tag#5 CDB: opcode=0x88 88 00 00 00 00 00 01 e7 96 90 00 00 00 08 00 00
[ 2174.750315] blk_update_request: I/O error, dev sdd, sector 31954576 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 2174.750382] sd 3:0:0:0: [sdd] tag#7 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 cmd_age=74s
[ 2174.750388] sd 3:0:0:0: [sdd] tag#7 Sense Key : 0x5 [current]
[ 2174.750392] sd 3:0:0:0: [sdd] tag#7 ASC=0x21 ASCQ=0x4
[ 2174.750396] sd 3:0:0:0: [sdd] tag#7 CDB: opcode=0x8a 8a 00 00 00 00 00 01 d7 cf 48 00 00 05 40 00 00
[ 2174.750401] blk_update_request: I/O error, dev sdd, sector 30920520 op 0x1:(WRITE) flags 0x104000 phys_seg 168 prio class 0
[ 2174.750828] sd 3:0:0:0: [sdd] tag#9 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 cmd_age=74s
[ 2174.750835] sd 3:0:0:0: [sdd] tag#9 Sense Key : 0x5 [current]
[ 2174.750840] sd 3:0:0:0: [sdd] tag#9 ASC=0x21 ASCQ=0x4
[ 2174.750845] sd 3:0:0:0: [sdd] tag#9 CDB: opcode=0x8a 8a 00 00 00 00 00 01 d7 d9 c8 00 00 05 40 00 00
[ 2174.750851] blk_update_request: I/O error, dev sdd, sector 30923208 op 0x1:(WRITE) flags 0x104000 phys_seg 168 prio class 0
[ 2174.751282] sd 3:0:0:0: [sdd] tag#10 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 cmd_age=74s
[ 2174.751288] sd 3:0:0:0: [sdd] tag#10 Sense Key : 0x5 [current]
[ 2174.751292] sd 3:0:0:0: [sdd] tag#10 ASC=0x21 ASCQ=0x4
[ 2174.751297] sd 3:0:0:0: [sdd] tag#10 CDB: opcode=0x8a 8a 00 00 00 00 00 01 d7 df 08 00 00 05 40 00 00
[ 2174.751301] blk_update_request: I/O error, dev sdd, sector 30924552 op 0x1:(WRITE) flags 0x104000 phys_seg 168 prio class 0
[ 2174.751701] sd 3:0:0:0: [sdd] tag#11 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 cmd_age=74s
[ 2174.751706] sd 3:0:0:0: [sdd] tag#11 Sense Key : 0x5 [current]
[ 2174.751709] sd 3:0:0:0: [sdd] tag#11 ASC=0x21 ASCQ=0x4
[ 2174.751714] sd 3:0:0:0: [sdd] tag#11 CDB: opcode=0x8a 8a 00 00 00 00 00 01 d7 e9 88 00 00 05 40 00 00
[ 2174.751718] blk_update_request: I/O error, dev sdd, sector 30927240 op 0x1:(WRITE) flags 0x104000 phys_seg 168 prio class 0
[ 2174.759411] ata4: EH complete
[11144.206383] ata4: softreset failed (device not ready)
[11145.082451] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[11145.101650] ata4.00: configured for UDMA/33
[14592.051992] ata4: softreset failed (device not ready)
[14593.643971] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[14593.951501] ata4.00: configured for UDMA/33

Hors ligne

#6 30-05-2021 15:33:38

Maknho
Membre
Distrib. : Debian GNU/Linux 10.4
Noyau : Linux 4.19.0-9-amd64
(G)UI : Xfce
Inscription : 01-06-2020

Re : [RESOLU] [DD : Erreur entrée/sortie] : suite à interruption rsync

Ou sortie dmesg | grep sdd -h

[ 2174.748114] sd 3:0:0:0: [sdd] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 cmd_age=74s
[ 2174.748121] sd 3:0:0:0: [sdd] tag#0 Sense Key : 0x5 [current]
[ 2174.748125] sd 3:0:0:0: [sdd] tag#0 ASC=0x21 ASCQ=0x4
[ 2174.748131] sd 3:0:0:0: [sdd] tag#0 CDB: opcode=0x8a 8a 00 00 00 00 00 01 d7 af c8 00 00 05 40 00 00
[ 2174.748137] blk_update_request: I/O error, dev sdd, sector 30912456 op 0x1:(WRITE) flags 0x104000 phys_seg 168 prio class 0
[ 2174.748146] Buffer I/O error on dev sdd1, logical block 3863801, lost async page write
[ 2174.748167] Buffer I/O error on dev sdd1, logical block 3863802, lost async page write
[ 2174.748172] Buffer I/O error on dev sdd1, logical block 3863803, lost async page write
[ 2174.748178] Buffer I/O error on dev sdd1, logical block 3863804, lost async page write
[ 2174.748184] Buffer I/O error on dev sdd1, logical block 3863805, lost async page write
[ 2174.748189] Buffer I/O error on dev sdd1, logical block 3863806, lost async page write
[ 2174.748195] Buffer I/O error on dev sdd1, logical block 3863807, lost async page write
[ 2174.748201] Buffer I/O error on dev sdd1, logical block 3863808, lost async page write
[ 2174.748207] Buffer I/O error on dev sdd1, logical block 3863809, lost async page write
[ 2174.748212] Buffer I/O error on dev sdd1, logical block 3863810, lost async page write
[ 2174.748603] sd 3:0:0:0: [sdd] tag#1 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 cmd_age=74s
[ 2174.748608] sd 3:0:0:0: [sdd] tag#1 Sense Key : 0x5 [current]
[ 2174.748612] sd 3:0:0:0: [sdd] tag#1 ASC=0x21 ASCQ=0x4
[ 2174.748617] sd 3:0:0:0: [sdd] tag#1 CDB: opcode=0x8a 8a 00 00 00 00 00 01 d7 b5 08 00 00 05 40 00 00
[ 2174.748622] blk_update_request: I/O error, dev sdd, sector 30913800 op 0x1:(WRITE) flags 0x104000 phys_seg 168 prio class 0
[ 2174.749049] sd 3:0:0:0: [sdd] tag#2 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 cmd_age=74s
[ 2174.749054] sd 3:0:0:0: [sdd] tag#2 Sense Key : 0x5 [current]
[ 2174.749058] sd 3:0:0:0: [sdd] tag#2 ASC=0x21 ASCQ=0x4
[ 2174.749062] sd 3:0:0:0: [sdd] tag#2 CDB: opcode=0x8a 8a 00 00 00 00 00 01 d7 bf 88 00 00 05 40 00 00
[ 2174.749068] blk_update_request: I/O error, dev sdd, sector 30916488 op 0x1:(WRITE) flags 0x104000 phys_seg 168 prio class 0
[ 2174.749478] sd 3:0:0:0: [sdd] tag#3 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 cmd_age=74s
[ 2174.749483] sd 3:0:0:0: [sdd] tag#3 Sense Key : 0x5 [current]
[ 2174.749487] sd 3:0:0:0: [sdd] tag#3 ASC=0x21 ASCQ=0x4
[ 2174.749491] sd 3:0:0:0: [sdd] tag#3 CDB: opcode=0x8a 8a 00 00 00 00 00 01 d7 c4 c8 00 00 05 40 00 00
[ 2174.749496] blk_update_request: I/O error, dev sdd, sector 30917832 op 0x1:(WRITE) flags 0x104000 phys_seg 168 prio class 0
[ 2174.749898] sd 3:0:0:0: [sdd] tag#4 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 cmd_age=74s
[ 2174.749903] sd 3:0:0:0: [sdd] tag#4 Sense Key : 0x5 [current]
[ 2174.749907] sd 3:0:0:0: [sdd] tag#4 ASC=0x21 ASCQ=0x4
[ 2174.749912] sd 3:0:0:0: [sdd] tag#4 CDB: opcode=0x8a 8a 00 00 00 00 00 01 d7 ca 08 00 00 05 40 00 00
[ 2174.749916] blk_update_request: I/O error, dev sdd, sector 30919176 op 0x1:(WRITE) flags 0x104000 phys_seg 168 prio class 0
[ 2174.750297] sd 3:0:0:0: [sdd] tag#5 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 cmd_age=74s
[ 2174.750302] sd 3:0:0:0: [sdd] tag#5 Sense Key : 0x5 [current]
[ 2174.750306] sd 3:0:0:0: [sdd] tag#5 ASC=0x21 ASCQ=0x4
[ 2174.750310] sd 3:0:0:0: [sdd] tag#5 CDB: opcode=0x88 88 00 00 00 00 00 01 e7 96 90 00 00 00 08 00 00
[ 2174.750315] blk_update_request: I/O error, dev sdd, sector 31954576 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 2174.750382] sd 3:0:0:0: [sdd] tag#7 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 cmd_age=74s
[ 2174.750388] sd 3:0:0:0: [sdd] tag#7 Sense Key : 0x5 [current]
[ 2174.750392] sd 3:0:0:0: [sdd] tag#7 ASC=0x21 ASCQ=0x4
[ 2174.750396] sd 3:0:0:0: [sdd] tag#7 CDB: opcode=0x8a 8a 00 00 00 00 00 01 d7 cf 48 00 00 05 40 00 00
[ 2174.750401] blk_update_request: I/O error, dev sdd, sector 30920520 op 0x1:(WRITE) flags 0x104000 phys_seg 168 prio class 0
[ 2174.750828] sd 3:0:0:0: [sdd] tag#9 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 cmd_age=74s
[ 2174.750835] sd 3:0:0:0: [sdd] tag#9 Sense Key : 0x5 [current]
[ 2174.750840] sd 3:0:0:0: [sdd] tag#9 ASC=0x21 ASCQ=0x4
[ 2174.750845] sd 3:0:0:0: [sdd] tag#9 CDB: opcode=0x8a 8a 00 00 00 00 00 01 d7 d9 c8 00 00 05 40 00 00
[ 2174.750851] blk_update_request: I/O error, dev sdd, sector 30923208 op 0x1:(WRITE) flags 0x104000 phys_seg 168 prio class 0
[ 2174.751282] sd 3:0:0:0: [sdd] tag#10 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 cmd_age=74s
[ 2174.751288] sd 3:0:0:0: [sdd] tag#10 Sense Key : 0x5 [current]
[ 2174.751292] sd 3:0:0:0: [sdd] tag#10 ASC=0x21 ASCQ=0x4
[ 2174.751297] sd 3:0:0:0: [sdd] tag#10 CDB: opcode=0x8a 8a 00 00 00 00 00 01 d7 df 08 00 00 05 40 00 00
[ 2174.751301] blk_update_request: I/O error, dev sdd, sector 30924552 op 0x1:(WRITE) flags 0x104000 phys_seg 168 prio class 0
[ 2174.751701] sd 3:0:0:0: [sdd] tag#11 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 cmd_age=74s
[ 2174.751706] sd 3:0:0:0: [sdd] tag#11 Sense Key : 0x5 [current]
[ 2174.751709] sd 3:0:0:0: [sdd] tag#11 ASC=0x21 ASCQ=0x4
[ 2174.751714] sd 3:0:0:0: [sdd] tag#11 CDB: opcode=0x8a 8a 00 00 00 00 00 01 d7 e9 88 00 00 05 40 00 00
[ 2174.751718] blk_update_request: I/O error, dev sdd, sector 30927240 op 0x1:(WRITE) flags 0x104000 phys_seg 168 prio class 0
[15829.620337] sd 3:0:0:0: [sdd] tag#19 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 cmd_age=22s
[15829.620362] sd 3:0:0:0: [sdd] tag#19 Sense Key : 0x5 [current]
[15829.620382] sd 3:0:0:0: [sdd] tag#19 ASC=0x21 ASCQ=0x4
[15829.620404] sd 3:0:0:0: [sdd] tag#19 CDB: opcode=0x88 88 00 00 00 00 00 00 00 18 00 00 00 00 08 00 00
[15829.620432] blk_update_request: I/O error, dev sdd, sector 6144 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[15875.591657] sd 3:0:0:0: [sdd] tag#21 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 cmd_age=10s
[15875.591682] sd 3:0:0:0: [sdd] tag#21 Sense Key : 0x5 [current]
[15875.591703] sd 3:0:0:0: [sdd] tag#21 ASC=0x21 ASCQ=0x4
[15875.591725] sd 3:0:0:0: [sdd] tag#21 CDB: opcode=0x88 88 00 00 00 00 00 00 00 08 18 00 00 00 08 00 00
[15875.591748] blk_update_request: I/O error, dev sdd, sector 2072 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0

Hors ligne

#7 30-05-2021 15:35:39

Maknho
Membre
Distrib. : Debian GNU/Linux 10.4
Noyau : Linux 4.19.0-9-amd64
(G)UI : Xfce
Inscription : 01-06-2020

Re : [RESOLU] [DD : Erreur entrée/sortie] : suite à interruption rsync

ou encore sortie dmesg -T


[Sun May 30 11:34:54 2021] ata4: hard resetting link
[Sun May 30 11:35:04 2021] ata4: softreset failed (device not ready)
[Sun May 30 11:35:04 2021] ata4: hard resetting link
[Sun May 30 11:35:04 2021] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Sun May 30 11:35:04 2021] ata4.00: configured for UDMA/33
[Sun May 30 11:35:04 2021] ata4: EH complete
[Sun May 30 11:35:05 2021] ata4.00: exception Emask 0x10 SAct 0xffbfffff SErr 0x9b0000 action 0xe frozen
[Sun May 30 11:35:05 2021] ata4.00: irq_stat 0x00400000, PHY RDY changed
[Sun May 30 11:35:05 2021] ata4: SError: { PHYRdyChg PHYInt 10B8B Dispar LinkSeq }
[Sun May 30 11:35:05 2021] ata4.00: failed command: WRITE FPDMA QUEUED
[Sun May 30 11:35:05 2021] ata4.00: cmd 61/40:00:08:a0:d7/05:00:01:00:00/40 tag 0 ncq dma 688128 out
                                    res 40/00:00:88:63:d9/00:00:01:00:00/40 Emask 0x10 (ATA bus error)
[Sun May 30 11:35:05 2021] ata4.00: status: { DRDY }
[Sun May 30 11:35:05 2021] ata4.00: failed command: WRITE FPDMA QUEUED
[Sun May 30 11:35:05 2021] ata4.00: cmd 61/40:08:08:5d:d8/05:00:01:00:00/40 tag 1 ncq dma 688128 out
                                    res 40/00:00:88:63:d9/00:00:01:00:00/40 Emask 0x10 (ATA bus error)
[Sun May 30 11:35:05 2021] ata4.00: status: { DRDY }
[Sun May 30 11:35:05 2021] ata4.00: failed command: WRITE FPDMA QUEUED
[Sun May 30 11:35:05 2021] ata4.00: cmd 61/40:10:48:62:d8/05:00:01:00:00/40 tag 2 ncq dma 688128 out
                                    res 40/00:00:88:63:d9/00:00:01:00:00/40 Emask 0x10 (ATA bus error)
[Sun May 30 11:35:05 2021] ata4.00: status: { DRDY }
[Sun May 30 11:35:05 2021] ata4.00: failed command: WRITE FPDMA QUEUED
[Sun May 30 11:35:05 2021] ata4.00: cmd 61/40:18:88:67:d8/05:00:01:00:00/40 tag 3 ncq dma 688128 out
                                    res 40/00:00:88:63:d9/00:00:01:00:00/40 Emask 0x10 (ATA bus error)
[Sun May 30 11:35:05 2021] ata4.00: status: { DRDY }
[Sun May 30 11:35:05 2021] ata4.00: failed command: WRITE FPDMA QUEUED
[Sun May 30 11:35:05 2021] ata4.00: cmd 61/40:20:c8:6c:d8/05:00:01:00:00/40 tag 4 ncq dma 688128 out
                                    res 40/00:00:88:63:d9/00:00:01:00:00/40 Emask 0x10 (ATA bus error)
[Sun May 30 11:35:05 2021] ata4.00: status: { DRDY }
[Sun May 30 11:35:05 2021] ata4.00: failed command: WRITE FPDMA QUEUED
[Sun May 30 11:35:05 2021] ata4.00: cmd 61/40:28:c8:af:d7/05:00:01:00:00/40 tag 5 ncq dma 688128 out
                                    res 40/00:00:88:63:d9/00:00:01:00:00/40 Emask 0x10 (ATA bus error)
[Sun May 30 11:35:05 2021] ata4.00: status: { DRDY }
[Sun May 30 11:35:05 2021] ata4.00: failed command: WRITE FPDMA QUEUED
[Sun May 30 11:35:05 2021] ata4.00: cmd 61/40:30:08:b5:d7/05:00:01:00:00/40 tag 6 ncq dma 688128 out
                                    res 40/00:00:88:63:d9/00:00:01:00:00/40 Emask 0x10 (ATA bus error)
[Sun May 30 11:35:05 2021] ata4.00: status: { DRDY }
[Sun May 30 11:35:05 2021] ata4.00: failed command: WRITE FPDMA QUEUED
[Sun May 30 11:35:05 2021] ata4.00: cmd 61/40:38:88:bf:d7/05:00:01:00:00/40 tag 7 ncq dma 688128 out
                                    res 40/00:00:88:63:d9/00:00:01:00:00/40 Emask 0x10 (ATA bus error)
[Sun May 30 11:35:05 2021] ata4.00: status: { DRDY }
[Sun May 30 11:35:05 2021] ata4.00: failed command: WRITE FPDMA QUEUED
[Sun May 30 11:35:05 2021] ata4.00: cmd 61/40:40:c8:c4:d7/05:00:01:00:00/40 tag 8 ncq dma 688128 out
                                    res 40/00:00:88:63:d9/00:00:01:00:00/40 Emask 0x10 (ATA bus error)
[Sun May 30 11:35:05 2021] ata4.00: status: { DRDY }
[Sun May 30 11:35:05 2021] ata4.00: failed command: WRITE FPDMA QUEUED
[Sun May 30 11:35:05 2021] ata4.00: cmd 61/40:48:08:ca:d7/05:00:01:00:00/40 tag 9 ncq dma 688128 out
                                    res 40/00:00:88:63:d9/00:00:01:00:00/40 Emask 0x10 (ATA bus error)
[Sun May 30 11:35:05 2021] ata4.00: status: { DRDY }
[Sun May 30 11:35:05 2021] ata4.00: failed command: READ FPDMA QUEUED
[Sun May 30 11:35:05 2021] ata4.00: cmd 60/08:50:90:96:e7/00:00:01:00:00/40 tag 10 ncq dma 4096 in
                                    res 40/00:00:88:63:d9/00:00:01:00:00/40 Emask 0x10 (ATA bus error)
[Sun May 30 11:35:05 2021] ata4.00: status: { DRDY }
[Sun May 30 11:35:05 2021] ata4.00: failed command: WRITE FPDMA QUEUED
[Sun May 30 11:35:05 2021] ata4.00: cmd 61/40:58:08:6e:d9/05:00:01:00:00/40 tag 11 ncq dma 688128 out
                                    res 40/00:00:88:63:d9/00:00:01:00:00/40 Emask 0x10 (ATA bus error)
[Sun May 30 11:35:05 2021] ata4.00: status: { DRDY }
[Sun May 30 11:35:05 2021] ata4.00: failed command: WRITE FPDMA QUEUED
[Sun May 30 11:35:05 2021] ata4.00: cmd 61/40:60:48:cf:d7/05:00:01:00:00/40 tag 12 ncq dma 688128 out
                                    res 40/00:00:88:63:d9/00:00:01:00:00/40 Emask 0x10 (ATA bus error)
[Sun May 30 11:35:05 2021] ata4.00: status: { DRDY }
[Sun May 30 11:35:05 2021] ata4.00: failed command: WRITE FPDMA QUEUED
[Sun May 30 11:35:05 2021] ata4.00: cmd 61/40:68:c8:57:d8/05:00:01:00:00/40 tag 13 ncq dma 688128 out
                                    res 40/00:00:88:63:d9/00:00:01:00:00/40 Emask 0x10 (ATA bus error)
[Sun May 30 11:35:05 2021] ata4.00: status: { DRDY }
[Sun May 30 11:35:05 2021] ata4.00: failed command: WRITE FPDMA QUEUED
[Sun May 30 11:35:05 2021] ata4.00: cmd 61/40:70:c8:d9:d7/05:00:01:00:00/40 tag 14 ncq dma 688128 out
                                    res 40/00:00:88:63:d9/00:00:01:00:00/40 Emask 0x10 (ATA bus error)
[Sun May 30 11:35:05 2021] ata4.00: status: { DRDY }
[Sun May 30 11:35:05 2021] ata4.00: failed command: WRITE FPDMA QUEUED
[Sun May 30 11:35:05 2021] ata4.00: cmd 61/40:78:08:df:d7/05:00:01:00:00/40 tag 15 ncq dma 688128 out
                                    res 40/00:00:88:63:d9/00:00:01:00:00/40 Emask 0x10 (ATA bus error)
[Sun May 30 11:35:05 2021] ata4.00: status: { DRDY }
[Sun May 30 11:35:05 2021] ata4.00: failed command: WRITE FPDMA QUEUED
[Sun May 30 11:35:05 2021] ata4.00: cmd 61/40:80:88:e9:d7/05:00:01:00:00/40 tag 16 ncq dma 688128 out
                                    res 40/00:00:88:63:d9/00:00:01:00:00/40 Emask 0x10 (ATA bus error)
[Sun May 30 11:35:05 2021] ata4.00: status: { DRDY }
[Sun May 30 11:35:05 2021] ata4.00: failed command: WRITE FPDMA QUEUED
[Sun May 30 11:35:05 2021] ata4.00: cmd 61/40:88:c8:ee:d7/05:00:01:00:00/40 tag 17 ncq dma 688128 out
                                    res 40/00:00:88:63:d9/00:00:01:00:00/40 Emask 0x10 (ATA bus error)
[Sun May 30 11:35:05 2021] ata4.00: status: { DRDY }
[Sun May 30 11:35:05 2021] ata4.00: failed command: WRITE FPDMA QUEUED
[Sun May 30 11:35:05 2021] ata4.00: cmd 61/40:90:08:72:d8/05:00:01:00:00/40 tag 18 ncq dma 688128 out
                                    res 40/00:00:88:63:d9/00:00:01:00:00/40 Emask 0x10 (ATA bus error)
[Sun May 30 11:35:05 2021] ata4.00: status: { DRDY }
[Sun May 30 11:35:05 2021] ata4.00: failed command: WRITE FPDMA QUEUED
[Sun May 30 11:35:05 2021] ata4.00: cmd 61/40:98:08:59:d9/05:00:01:00:00/40 tag 19 ncq dma 688128 out
                                    res 40/00:00:88:63:d9/00:00:01:00:00/40 Emask 0x10 (ATA bus error)
[Sun May 30 11:35:05 2021] ata4.00: status: { DRDY }
[Sun May 30 11:35:05 2021] ata4.00: failed command: WRITE FPDMA QUEUED
[Sun May 30 11:35:05 2021] ata4.00: cmd 61/40:a0:c8:42:d8/05:00:01:00:00/40 tag 20 ncq dma 688128 out
                                    res 40/00:00:88:63:d9/00:00:01:00:00/40 Emask 0x10 (ATA bus error)
[Sun May 30 11:35:05 2021] ata4.00: status: { DRDY }
[Sun May 30 11:35:05 2021] ata4.00: failed command: WRITE FPDMA QUEUED
[Sun May 30 11:35:05 2021] ata4.00: cmd 61/40:a8:08:48:d8/05:00:01:00:00/40 tag 21 ncq dma 688128 out
                                    res 40/00:00:88:63:d9/00:00:01:00:00/40 Emask 0x10 (ATA bus error)
[Sun May 30 11:35:05 2021] ata4.00: status: { DRDY }
[Sun May 30 11:35:05 2021] ata4.00: failed command: WRITE FPDMA QUEUED
[Sun May 30 11:35:05 2021] ata4.00: cmd 61/40:b8:88:13:d8/05:00:01:00:00/40 tag 23 ncq dma 688128 out
                                    res 40/00:00:88:63:d9/00:00:01:00:00/40 Emask 0x10 (ATA bus error)
[Sun May 30 11:35:05 2021] ata4.00: status: { DRDY }
[Sun May 30 11:35:05 2021] ata4.00: failed command: WRITE FPDMA QUEUED
[Sun May 30 11:35:05 2021] ata4.00: cmd 61/40:c0:c8:18:d8/05:00:01:00:00/40 tag 24 ncq dma 688128 out
                                    res 40/00:00:88:63:d9/00:00:01:00:00/40 Emask 0x10 (ATA bus error)
[Sun May 30 11:35:05 2021] ata4.00: status: { DRDY }
[Sun May 30 11:35:05 2021] ata4.00: failed command: WRITE FPDMA QUEUED
[Sun May 30 11:35:05 2021] ata4.00: cmd 61/40:c8:48:77:d8/05:00:01:00:00/40 tag 25 ncq dma 688128 out
                                    res 40/00:00:88:63:d9/00:00:01:00:00/40 Emask 0x10 (ATA bus error)
[Sun May 30 11:35:05 2021] ata4.00: status: { DRDY }
[Sun May 30 11:35:05 2021] ata4.00: failed command: WRITE FPDMA QUEUED
[Sun May 30 11:35:05 2021] ata4.00: cmd 61/40:d0:88:7c:d8/05:00:01:00:00/40 tag 26 ncq dma 688128 out
                                    res 40/00:00:88:63:d9/00:00:01:00:00/40 Emask 0x10 (ATA bus error)
[Sun May 30 11:35:05 2021] ata4.00: status: { DRDY }
[Sun May 30 11:35:05 2021] ata4.00: failed command: WRITE FPDMA QUEUED
[Sun May 30 11:35:05 2021] ata4.00: cmd 61/40:d8:48:5e:d9/05:00:01:00:00/40 tag 27 ncq dma 688128 out
                                    res 40/00:00:88:63:d9/00:00:01:00:00/40 Emask 0x10 (ATA bus error)
[Sun May 30 11:35:05 2021] ata4.00: status: { DRDY }
[Sun May 30 11:35:05 2021] ata4.00: failed command: WRITE FPDMA QUEUED
[Sun May 30 11:35:05 2021] ata4.00: cmd 61/40:e0:88:63:d9/05:00:01:00:00/40 tag 28 ncq dma 688128 out
                                    res 40/00:00:88:63:d9/00:00:01:00:00/40 Emask 0x10 (ATA bus error)
[Sun May 30 11:35:05 2021] ata4.00: status: { DRDY }
[Sun May 30 11:35:05 2021] ata4.00: failed command: WRITE FPDMA QUEUED
[Sun May 30 11:35:05 2021] ata4.00: cmd 61/40:e8:c8:68:d9/05:00:01:00:00/40 tag 29 ncq dma 688128 out
                                    res 40/00:00:88:63:d9/00:00:01:00:00/40 Emask 0x10 (ATA bus error)
[Sun May 30 11:35:05 2021] ata4.00: status: { DRDY }
[Sun May 30 11:35:05 2021] ata4.00: failed command: WRITE FPDMA QUEUED
[Sun May 30 11:35:05 2021] ata4.00: cmd 61/40:f0:c8:9a:d7/05:00:01:00:00/40 tag 30 ncq dma 688128 out
                                    res 40/00:00:88:63:d9/00:00:01:00:00/40 Emask 0x10 (ATA bus error)
[Sun May 30 11:35:05 2021] ata4.00: status: { DRDY }
[Sun May 30 11:35:05 2021] ata4.00: failed command: WRITE FPDMA QUEUED
[Sun May 30 11:35:05 2021] ata4.00: cmd 61/40:f8:48:ba:d7/05:00:01:00:00/40 tag 31 ncq dma 688128 out
                                    res 40/00:00:88:63:d9/00:00:01:00:00/40 Emask 0x10 (ATA bus error)
[Sun May 30 11:35:05 2021] ata4.00: status: { DRDY }
[Sun May 30 11:35:05 2021] ata4: hard resetting link
[Sun May 30 11:35:15 2021] ata4: softreset failed (device not ready)
[Sun May 30 11:35:15 2021] ata4: hard resetting link
[Sun May 30 11:35:18 2021] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Sun May 30 11:35:18 2021] ata4.00: configured for UDMA/33
[Sun May 30 11:35:18 2021] ata4: EH complete
[Sun May 30 11:35:18 2021] ata4.00: exception Emask 0x10 SAct 0xf7ffffff SErr 0x9b0000 action 0xe frozen
[Sun May 30 11:35:18 2021] ata4.00: irq_stat 0x00400000, PHY RDY changed
[Sun May 30 11:35:18 2021] ata4: SError: { PHYRdyChg PHYInt 10B8B Dispar LinkSeq }
[Sun May 30 11:35:18 2021] ata4.00: failed command: WRITE FPDMA QUEUED
[Sun May 30 11:35:18 2021] ata4.00: cmd 61/40:00:c8:af:d7/05:00:01:00:00/40 tag 0 ncq dma 688128 out
                                    res 40/00:00:c8:7d:d9/00:00:01:00:00/40 Emask 0x10 (ATA bus error)
[Sun May 30 11:35:18 2021] ata4.00: status: { DRDY }
[Sun May 30 11:35:18 2021] ata4.00: failed command: WRITE FPDMA QUEUED
[Sun May 30 11:35:18 2021] ata4.00: cmd 61/40:08:08:b5:d7/05:00:01:00:00/40 tag 1 ncq dma 688128 out
                                    res 40/00:00:c8:7d:d9/00:00:01:00:00/40 Emask 0x10 (ATA bus error)
[Sun May 30 11:35:18 2021] ata4.00: status: { DRDY }
[Sun May 30 11:35:18 2021] ata4.00: failed command: WRITE FPDMA QUEUED
[Sun May 30 11:35:18 2021] ata4.00: cmd 61/40:10:88:bf:d7/05:00:01:00:00/40 tag 2 ncq dma 688128 out
                                    res 40/00:00:c8:7d:d9/00:00:01:00:00/40 Emask 0x10 (ATA bus error)
[Sun May 30 11:35:18 2021] ata4.00: status: { DRDY }
[Sun May 30 11:35:18 2021] ata4.00: failed command: WRITE FPDMA QUEUED
[Sun May 30 11:35:18 2021] ata4.00: cmd 61/40:18:c8:c4:d7/05:00:01:00:00/40 tag 3 ncq dma 688128 out
                                    res 40/00:00:c8:7d:d9/00:00:01:00:00/40 Emask 0x10 (ATA bus error)
[Sun May 30 11:35:18 2021] ata4.00: status: { DRDY }
[Sun May 30 11:35:18 2021] ata4.00: failed command: WRITE FPDMA QUEUED
[Sun May 30 11:35:18 2021] ata4.00: cmd 61/40:20:08:ca:d7/05:00:01:00:00/40 tag 4 ncq dma 688128 out
                                    res 40/00:00:c8:7d:d9/00:00:01:00:00/40 Emask 0x10 (ATA bus error)
[Sun May 30 11:35:18 2021] ata4.00: status: { DRDY }
[Sun May 30 11:35:18 2021] ata4.00: failed command: READ FPDMA QUEUED
[Sun May 30 11:35:18 2021] ata4.00: cmd 60/08:28:90:96:e7/00:00:01:00:00/40 tag 5 ncq dma 4096 in
                                    res 40/00:00:c8:7d:d9/00:00:01:00:00/40 Emask 0x10 (ATA bus error)
[Sun May 30 11:35:18 2021] ata4.00: status: { DRDY }
[Sun May 30 11:35:18 2021] ata4.00: failed command: WRITE FPDMA QUEUED
[Sun May 30 11:35:18 2021] ata4.00: cmd 61/40:30:08:6e:d9/05:00:01:00:00/40 tag 6 ncq dma 688128 out
                                    res 40/00:00:c8:7d:d9/00:00:01:00:00/40 Emask 0x10 (ATA bus error)
[Sun May 30 11:35:18 2021] ata4.00: status: { DRDY }
[Sun May 30 11:35:18 2021] ata4.00: failed command: WRITE FPDMA QUEUED
[Sun May 30 11:35:18 2021] ata4.00: cmd 61/40:38:48:cf:d7/05:00:01:00:00/40 tag 7 ncq dma 688128 out
                                    res 40/00:00:c8:7d:d9/00:00:01:00:00/40 Emask 0x10 (ATA bus error)
[Sun May 30 11:35:18 2021] ata4.00: status: { DRDY }
[Sun May 30 11:35:18 2021] ata4.00: failed command: WRITE FPDMA QUEUED
[Sun May 30 11:35:18 2021] ata4.00: cmd 61/40:40:c8:57:d8/05:00:01:00:00/40 tag 8 ncq dma 688128 out
                                    res 40/00:00:c8:7d:d9/00:00:01:00:00/40 Emask 0x10 (ATA bus error)
[Sun May 30 11:35:18 2021] ata4.00: status: { DRDY }
[Sun May 30 11:35:18 2021] ata4.00: failed command: WRITE FPDMA QUEUED
[Sun May 30 11:35:18 2021] ata4.00: cmd 61/40:48:c8:d9:d7/05:00:01:00:00/40 tag 9 ncq dma 688128 out
                                    res 40/00:00:c8:7d:d9/00:00:01:00:00/40 Emask 0x10 (ATA bus error)
[Sun May 30 11:35:18 2021] ata4.00: status: { DRDY }
[Sun May 30 11:35:18 2021] ata4.00: failed command: WRITE FPDMA QUEUED
[Sun May 30 11:35:18 2021] ata4.00: cmd 61/40:50:08:df:d7/05:00:01:00:00/40 tag 10 ncq dma 688128 out
                                    res 40/00:00:c8:7d:d9/00:00:01:00:00/40 Emask 0x10 (ATA bus error)
[Sun May 30 11:35:18 2021] ata4.00: status: { DRDY }
[Sun May 30 11:35:18 2021] ata4.00: failed command: WRITE FPDMA QUEUED
[Sun May 30 11:35:18 2021] ata4.00: cmd 61/40:58:88:e9:d7/05:00:01:00:00/40 tag 11 ncq dma 688128 out
                                    res 40/00:00:c8:7d:d9/00:00:01:00:00/40 Emask 0x10 (ATA bus error)
[Sun May 30 11:35:18 2021] ata4.00: status: { DRDY }
[Sun May 30 11:35:18 2021] ata4.00: failed command: WRITE FPDMA QUEUED
[Sun May 30 11:35:18 2021] ata4.00: cmd 61/40:60:c8:ee:d7/05:00:01:00:00/40 tag 12 ncq dma 688128 out
                                    res 40/00:00:c8:7d:d9/00:00:01:00:00/40 Emask 0x10 (ATA bus error)
[Sun May 30 11:35:18 2021] ata4.00: status: { DRDY }
[Sun May 30 11:35:18 2021] ata4.00: failed command: WRITE FPDMA QUEUED
[Sun May 30 11:35:18 2021] ata4.00: cmd 61/40:68:08:72:d8/05:00:01:00:00/40 tag 13 ncq dma 688128 out
                                    res 40/00:00:c8:7d:d9/00:00:01:00:00/40 Emask 0x10 (ATA bus error)
[Sun May 30 11:35:18 2021] ata4.00: status: { DRDY }
[Sun May 30 11:35:18 2021] ata4.00: failed command: WRITE FPDMA QUEUED
[Sun May 30 11:35:18 2021] ata4.00: cmd 61/40:70:08:59:d9/05:00:01:00:00/40 tag 14 ncq dma 688128 out
                                    res 40/00:00:c8:7d:d9/00:00:01:00:00/40 Emask 0x10 (ATA bus error)
[Sun May 30 11:35:18 2021] ata4.00: status: { DRDY }
[Sun May 30 11:35:18 2021] ata4.00: failed command: WRITE FPDMA QUEUED
[Sun May 30 11:35:18 2021] ata4.00: cmd 61/40:78:c8:42:d8/05:00:01:00:00/40 tag 15 ncq dma 688128 out
                                    res 40/00:00:c8:7d:d9/00:00:01:00:00/40 Emask 0x10 (ATA bus error)
[Sun May 30 11:35:18 2021] ata4.00: status: { DRDY }
[Sun May 30 11:35:18 2021] ata4.00: failed command: WRITE FPDMA QUEUED
[Sun May 30 11:35:18 2021] ata4.00: cmd 61/40:80:08:48:d8/05:00:01:00:00/40 tag 16 ncq dma 688128 out
                                    res 40/00:00:c8:7d:d9/00:00:01:00:00/40 Emask 0x10 (ATA bus error)
[Sun May 30 11:35:18 2021] ata4.00: status: { DRDY }
[Sun May 30 11:35:18 2021] ata4.00: failed command: WRITE FPDMA QUEUED
[Sun May 30 11:35:18 2021] ata4.00: cmd 61/40:88:88:13:d8/05:00:01:00:00/40 tag 17 ncq dma 688128 out
                                    res 40/00:00:c8:7d:d9/00:00:01:00:00/40 Emask 0x10 (ATA bus error)
[Sun May 30 11:35:18 2021] ata4.00: status: { DRDY }
[Sun May 30 11:35:18 2021] ata4.00: failed command: WRITE FPDMA QUEUED
[Sun May 30 11:35:18 2021] ata4.00: cmd 61/40:90:c8:18:d8/05:00:01:00:00/40 tag 18 ncq dma 688128 out
                                    res 40/00:00:c8:7d:d9/00:00:01:00:00/40 Emask 0x10 (ATA bus error)
[Sun May 30 11:35:18 2021] ata4.00: status: { DRDY }
[Sun May 30 11:35:18 2021] ata4.00: failed command: WRITE FPDMA QUEUED
[Sun May 30 11:35:18 2021] ata4.00: cmd 61/40:98:48:77:d8/05:00:01:00:00/40 tag 19 ncq dma 688128 out
                                    res 40/00:00:c8:7d:d9/00:00:01:00:00/40 Emask 0x10 (ATA bus error)
[Sun May 30 11:35:18 2021] ata4.00: status: { DRDY }
[Sun May 30 11:35:18 2021] ata4.00: failed command: WRITE FPDMA QUEUED
[Sun May 30 11:35:18 2021] ata4.00: cmd 61/40:a0:88:7c:d8/05:00:01:00:00/40 tag 20 ncq dma 688128 out
                                    res 40/00:00:c8:7d:d9/00:00:01:00:00/40 Emask 0x10 (ATA bus error)
[Sun May 30 11:35:18 2021] ata4.00: status: { DRDY }
[Sun May 30 11:35:18 2021] ata4.00: failed command: WRITE FPDMA QUEUED
[Sun May 30 11:35:18 2021] ata4.00: cmd 61/40:a8:48:5e:d9/05:00:01:00:00/40 tag 21 ncq dma 688128 out
                                    res 40/00:00:c8:7d:d9/00:00:01:00:00/40 Emask 0x10 (ATA bus error)
[Sun May 30 11:35:18 2021] ata4.00: status: { DRDY }
[Sun May 30 11:35:18 2021] ata4.00: failed command: WRITE FPDMA QUEUED
[Sun May 30 11:35:18 2021] ata4.00: cmd 61/40:b0:88:63:d9/05:00:01:00:00/40 tag 22 ncq dma 688128 out
                                    res 40/00:00:c8:7d:d9/00:00:01:00:00/40 Emask 0x10 (ATA bus error)
[Sun May 30 11:35:18 2021] ata4.00: status: { DRDY }
[Sun May 30 11:35:18 2021] ata4.00: failed command: WRITE FPDMA QUEUED
[Sun May 30 11:35:18 2021] ata4.00: cmd 61/40:b8:c8:68:d9/05:00:01:00:00/40 tag 23 ncq dma 688128 out
                                    res 40/00:00:c8:7d:d9/00:00:01:00:00/40 Emask 0x10 (ATA bus error)
[Sun May 30 11:35:18 2021] ata4.00: status: { DRDY }
[Sun May 30 11:35:18 2021] ata4.00: failed command: WRITE FPDMA QUEUED
[Sun May 30 11:35:18 2021] ata4.00: cmd 61/40:c0:48:ba:d7/05:00:01:00:00/40 tag 24 ncq dma 688128 out
                                    res 40/00:00:c8:7d:d9/00:00:01:00:00/40 Emask 0x10 (ATA bus error)
[Sun May 30 11:35:18 2021] ata4.00: status: { DRDY }
[Sun May 30 11:35:18 2021] ata4.00: failed command: WRITE FPDMA QUEUED
[Sun May 30 11:35:18 2021] ata4.00: cmd 61/40:c8:88:78:d9/05:00:01:00:00/40 tag 25 ncq dma 688128 out
                                    res 40/00:00:c8:7d:d9/00:00:01:00:00/40 Emask 0x10 (ATA bus error)
[Sun May 30 11:35:18 2021] ata4.00: status: { DRDY }
[Sun May 30 11:35:18 2021] ata4.00: failed command: WRITE FPDMA QUEUED
[Sun May 30 11:35:18 2021] ata4.00: cmd 61/40:d0:c8:7d:d9/05:00:01:00:00/40 tag 26 ncq dma 688128 out
                                    res 40/00:00:c8:7d:d9/00:00:01:00:00/40 Emask 0x10 (ATA bus error)
[Sun May 30 11:35:18 2021] ata4.00: status: { DRDY }
[Sun May 30 11:35:18 2021] ata4.00: failed command: WRITE FPDMA QUEUED
[Sun May 30 11:35:18 2021] ata4.00: cmd 61/40:e0:48:62:d8/05:00:01:00:00/40 tag 28 ncq dma 688128 out
                                    res 40/00:00:c8:7d:d9/00:00:01:00:00/40 Emask 0x10 (ATA bus error)
[Sun May 30 11:35:18 2021] ata4.00: status: { DRDY }
[Sun May 30 11:35:18 2021] ata4.00: failed command: WRITE FPDMA QUEUED
[Sun May 30 11:35:18 2021] ata4.00: cmd 61/40:e8:88:67:d8/05:00:01:00:00/40 tag 29 ncq dma 688128 out
                                    res 40/00:00:c8:7d:d9/00:00:01:00:00/40 Emask 0x10 (ATA bus error)
[Sun May 30 11:35:18 2021] ata4.00: status: { DRDY }
[Sun May 30 11:35:18 2021] ata4.00: failed command: WRITE FPDMA QUEUED
[Sun May 30 11:35:18 2021] ata4.00: cmd 61/40:f0:c8:6c:d8/05:00:01:00:00/40 tag 30 ncq dma 688128 out
                                    res 40/00:00:c8:7d:d9/00:00:01:00:00/40 Emask 0x10 (ATA bus error)
[Sun May 30 11:35:18 2021] ata4.00: status: { DRDY }
[Sun May 30 11:35:18 2021] ata4.00: failed command: WRITE FPDMA QUEUED
[Sun May 30 11:35:18 2021] ata4.00: cmd 61/40:f8:c8:9a:d7/05:00:01:00:00/40 tag 31 ncq dma 688128 out
                                    res 40/00:00:c8:7d:d9/00:00:01:00:00/40 Emask 0x10 (ATA bus error)
[Sun May 30 11:35:18 2021] ata4.00: status: { DRDY }
[Sun May 30 11:35:18 2021] ata4: hard resetting link
[Sun May 30 11:35:28 2021] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Sun May 30 11:35:28 2021] ata4.00: configured for UDMA/33
[Sun May 30 11:35:28 2021] sd 3:0:0:0: [sdd] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 cmd_age=74s
[Sun May 30 11:35:28 2021] sd 3:0:0:0: [sdd] tag#0 Sense Key : 0x5 [current]
[Sun May 30 11:35:28 2021] sd 3:0:0:0: [sdd] tag#0 ASC=0x21 ASCQ=0x4
[Sun May 30 11:35:28 2021] sd 3:0:0:0: [sdd] tag#0 CDB: opcode=0x8a 8a 00 00 00 00 00 01 d7 af c8 00 00 05 40 00 00
[Sun May 30 11:35:28 2021] blk_update_request: I/O error, dev sdd, sector 30912456 op 0x1:(WRITE) flags 0x104000 phys_seg 168 prio class 0
[Sun May 30 11:35:28 2021] buffer_io_error: 998 callbacks suppressed
[Sun May 30 11:35:28 2021] Buffer I/O error on dev sdd1, logical block 3863801, lost async page write
[Sun May 30 11:35:28 2021] Buffer I/O error on dev sdd1, logical block 3863802, lost async page write
[Sun May 30 11:35:28 2021] Buffer I/O error on dev sdd1, logical block 3863803, lost async page write
[Sun May 30 11:35:28 2021] Buffer I/O error on dev sdd1, logical block 3863804, lost async page write
[Sun May 30 11:35:28 2021] Buffer I/O error on dev sdd1, logical block 3863805, lost async page write
[Sun May 30 11:35:28 2021] Buffer I/O error on dev sdd1, logical block 3863806, lost async page write
[Sun May 30 11:35:28 2021] Buffer I/O error on dev sdd1, logical block 3863807, lost async page write
[Sun May 30 11:35:28 2021] Buffer I/O error on dev sdd1, logical block 3863808, lost async page write
[Sun May 30 11:35:28 2021] Buffer I/O error on dev sdd1, logical block 3863809, lost async page write
[Sun May 30 11:35:28 2021] Buffer I/O error on dev sdd1, logical block 3863810, lost async page write
[Sun May 30 11:35:28 2021] sd 3:0:0:0: [sdd] tag#1 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 cmd_age=74s
[Sun May 30 11:35:28 2021] sd 3:0:0:0: [sdd] tag#1 Sense Key : 0x5 [current]
[Sun May 30 11:35:28 2021] sd 3:0:0:0: [sdd] tag#1 ASC=0x21 ASCQ=0x4
[Sun May 30 11:35:28 2021] sd 3:0:0:0: [sdd] tag#1 CDB: opcode=0x8a 8a 00 00 00 00 00 01 d7 b5 08 00 00 05 40 00 00
[Sun May 30 11:35:28 2021] blk_update_request: I/O error, dev sdd, sector 30913800 op 0x1:(WRITE) flags 0x104000 phys_seg 168 prio class 0
[Sun May 30 11:35:28 2021] sd 3:0:0:0: [sdd] tag#2 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 cmd_age=74s
[Sun May 30 11:35:28 2021] sd 3:0:0:0: [sdd] tag#2 Sense Key : 0x5 [current]
[Sun May 30 11:35:28 2021] sd 3:0:0:0: [sdd] tag#2 ASC=0x21 ASCQ=0x4
[Sun May 30 11:35:28 2021] sd 3:0:0:0: [sdd] tag#2 CDB: opcode=0x8a 8a 00 00 00 00 00 01 d7 bf 88 00 00 05 40 00 00
[Sun May 30 11:35:28 2021] blk_update_request: I/O error, dev sdd, sector 30916488 op 0x1:(WRITE) flags 0x104000 phys_seg 168 prio class 0
[Sun May 30 11:35:28 2021] sd 3:0:0:0: [sdd] tag#3 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 cmd_age=74s
[Sun May 30 11:35:28 2021] sd 3:0:0:0: [sdd] tag#3 Sense Key : 0x5 [current]
[Sun May 30 11:35:28 2021] sd 3:0:0:0: [sdd] tag#3 ASC=0x21 ASCQ=0x4
[Sun May 30 11:35:28 2021] sd 3:0:0:0: [sdd] tag#3 CDB: opcode=0x8a 8a 00 00 00 00 00 01 d7 c4 c8 00 00 05 40 00 00
[Sun May 30 11:35:28 2021] blk_update_request: I/O error, dev sdd, sector 30917832 op 0x1:(WRITE) flags 0x104000 phys_seg 168 prio class 0
[Sun May 30 11:35:28 2021] sd 3:0:0:0: [sdd] tag#4 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 cmd_age=74s
[Sun May 30 11:35:28 2021] sd 3:0:0:0: [sdd] tag#4 Sense Key : 0x5 [current]
[Sun May 30 11:35:28 2021] sd 3:0:0:0: [sdd] tag#4 ASC=0x21 ASCQ=0x4
[Sun May 30 11:35:28 2021] sd 3:0:0:0: [sdd] tag#4 CDB: opcode=0x8a 8a 00 00 00 00 00 01 d7 ca 08 00 00 05 40 00 00
[Sun May 30 11:35:28 2021] blk_update_request: I/O error, dev sdd, sector 30919176 op 0x1:(WRITE) flags 0x104000 phys_seg 168 prio class 0
[Sun May 30 11:35:28 2021] sd 3:0:0:0: [sdd] tag#5 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 cmd_age=74s
[Sun May 30 11:35:28 2021] sd 3:0:0:0: [sdd] tag#5 Sense Key : 0x5 [current]
[Sun May 30 11:35:28 2021] sd 3:0:0:0: [sdd] tag#5 ASC=0x21 ASCQ=0x4
[Sun May 30 11:35:28 2021] sd 3:0:0:0: [sdd] tag#5 CDB: opcode=0x88 88 00 00 00 00 00 01 e7 96 90 00 00 00 08 00 00
[Sun May 30 11:35:28 2021] blk_update_request: I/O error, dev sdd, sector 31954576 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[Sun May 30 11:35:28 2021] sd 3:0:0:0: [sdd] tag#7 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 cmd_age=74s
[Sun May 30 11:35:28 2021] sd 3:0:0:0: [sdd] tag#7 Sense Key : 0x5 [current]
[Sun May 30 11:35:28 2021] sd 3:0:0:0: [sdd] tag#7 ASC=0x21 ASCQ=0x4
[Sun May 30 11:35:28 2021] sd 3:0:0:0: [sdd] tag#7 CDB: opcode=0x8a 8a 00 00 00 00 00 01 d7 cf 48 00 00 05 40 00 00
[Sun May 30 11:35:28 2021] blk_update_request: I/O error, dev sdd, sector 30920520 op 0x1:(WRITE) flags 0x104000 phys_seg 168 prio class 0
[Sun May 30 11:35:28 2021] sd 3:0:0:0: [sdd] tag#9 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 cmd_age=74s
[Sun May 30 11:35:28 2021] sd 3:0:0:0: [sdd] tag#9 Sense Key : 0x5 [current]
[Sun May 30 11:35:28 2021] sd 3:0:0:0: [sdd] tag#9 ASC=0x21 ASCQ=0x4
[Sun May 30 11:35:28 2021] sd 3:0:0:0: [sdd] tag#9 CDB: opcode=0x8a 8a 00 00 00 00 00 01 d7 d9 c8 00 00 05 40 00 00
[Sun May 30 11:35:28 2021] blk_update_request: I/O error, dev sdd, sector 30923208 op 0x1:(WRITE) flags 0x104000 phys_seg 168 prio class 0
[Sun May 30 11:35:28 2021] sd 3:0:0:0: [sdd] tag#10 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 cmd_age=74s
[Sun May 30 11:35:28 2021] sd 3:0:0:0: [sdd] tag#10 Sense Key : 0x5 [current]
[Sun May 30 11:35:28 2021] sd 3:0:0:0: [sdd] tag#10 ASC=0x21 ASCQ=0x4
[Sun May 30 11:35:28 2021] sd 3:0:0:0: [sdd] tag#10 CDB: opcode=0x8a 8a 00 00 00 00 00 01 d7 df 08 00 00 05 40 00 00
[Sun May 30 11:35:28 2021] blk_update_request: I/O error, dev sdd, sector 30924552 op 0x1:(WRITE) flags 0x104000 phys_seg 168 prio class 0
[Sun May 30 11:35:28 2021] sd 3:0:0:0: [sdd] tag#11 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 cmd_age=74s
[Sun May 30 11:35:28 2021] sd 3:0:0:0: [sdd] tag#11 Sense Key : 0x5 [current]
[Sun May 30 11:35:28 2021] sd 3:0:0:0: [sdd] tag#11 ASC=0x21 ASCQ=0x4
[Sun May 30 11:35:28 2021] sd 3:0:0:0: [sdd] tag#11 CDB: opcode=0x8a 8a 00 00 00 00 00 01 d7 e9 88 00 00 05 40 00 00
[Sun May 30 11:35:28 2021] blk_update_request: I/O error, dev sdd, sector 30927240 op 0x1:(WRITE) flags 0x104000 phys_seg 168 prio class 0
[Sun May 30 11:35:28 2021] ata4: EH complete
[Sun May 30 14:04:58 2021] ata4: softreset failed (device not ready)
[Sun May 30 14:04:59 2021] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Sun May 30 14:04:59 2021] ata4.00: configured for UDMA/33
[Sun May 30 15:02:26 2021] ata4: softreset failed (device not ready)
[Sun May 30 15:02:27 2021] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Sun May 30 15:02:27 2021] ata4.00: configured for UDMA/33
[Sun May 30 15:22:40 2021] ata4: softreset failed (device not ready)
[Sun May 30 15:22:40 2021] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Sun May 30 15:22:40 2021] ata4.00: configured for UDMA/33
[Sun May 30 15:22:41 2021] ata4.00: exception Emask 0x10 SAct 0x80000 SErr 0x9b0000 action 0xe frozen
[Sun May 30 15:22:41 2021] ata4.00: irq_stat 0x00400000, PHY RDY changed
[Sun May 30 15:22:41 2021] ata4: SError: { PHYRdyChg PHYInt 10B8B Dispar LinkSeq }
[Sun May 30 15:22:41 2021] ata4.00: failed command: READ FPDMA QUEUED
[Sun May 30 15:22:41 2021] ata4.00: cmd 60/08:98:00:18:00/00:00:00:00:00/40 tag 19 ncq dma 4096 in
                                    res 40/00:00:00:18:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[Sun May 30 15:22:41 2021] ata4.00: status: { DRDY }
[Sun May 30 15:22:41 2021] ata4: hard resetting link
[Sun May 30 15:22:50 2021] ata4: SATA link down (SStatus 0 SControl 310)
[Sun May 30 15:22:51 2021] ata4: hard resetting link
[Sun May 30 15:23:01 2021] ata4: softreset failed (device not ready)
[Sun May 30 15:23:01 2021] ata4: hard resetting link
[Sun May 30 15:23:03 2021] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Sun May 30 15:23:03 2021] ata4.00: configured for UDMA/33
[Sun May 30 15:23:03 2021] scsi_io_completion_action: 5 callbacks suppressed
[Sun May 30 15:23:03 2021] sd 3:0:0:0: [sdd] tag#19 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 cmd_age=22s
[Sun May 30 15:23:03 2021] sd 3:0:0:0: [sdd] tag#19 Sense Key : 0x5 [current]
[Sun May 30 15:23:03 2021] sd 3:0:0:0: [sdd] tag#19 ASC=0x21 ASCQ=0x4
[Sun May 30 15:23:03 2021] sd 3:0:0:0: [sdd] tag#19 CDB: opcode=0x88 88 00 00 00 00 00 00 00 18 00 00 00 00 08 00 00
[Sun May 30 15:23:03 2021] print_req_error: 5 callbacks suppressed
[Sun May 30 15:23:03 2021] blk_update_request: I/O error, dev sdd, sector 6144 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[Sun May 30 15:23:03 2021] ata4: EH complete
[Sun May 30 15:23:03 2021] ata4.00: exception Emask 0x10 SAct 0x200000 SErr 0x9b0000 action 0xe frozen
[Sun May 30 15:23:03 2021] ata4.00: irq_stat 0x00400000, PHY RDY changed
[Sun May 30 15:23:03 2021] ata4: SError: { PHYRdyChg PHYInt 10B8B Dispar LinkSeq }
[Sun May 30 15:23:03 2021] ata4.00: failed command: READ FPDMA QUEUED
[Sun May 30 15:23:03 2021] ata4.00: cmd 60/08:a8:00:18:00/00:00:00:00:00/40 tag 21 ncq dma 4096 in
                                    res 40/00:00:00:18:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[Sun May 30 15:23:03 2021] ata4.00: status: { DRDY }
[Sun May 30 15:23:03 2021] ata4: hard resetting link
[Sun May 30 15:23:13 2021] ata4: softreset failed (device not ready)
[Sun May 30 15:23:13 2021] ata4: hard resetting link
[Sun May 30 15:23:15 2021] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Sun May 30 15:23:15 2021] ata4.00: configured for UDMA/33
[Sun May 30 15:23:15 2021] ata4: EH complete
[Sun May 30 15:23:25 2021] ata4: softreset failed (device not ready)
[Sun May 30 15:23:27 2021] ata4: SATA link down (SStatus 0 SControl 310)
[Sun May 30 15:23:37 2021] ata4: softreset failed (device not ready)
[Sun May 30 15:23:38 2021] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Sun May 30 15:23:38 2021] ata4.00: configured for UDMA/33
[Sun May 30 15:23:38 2021] ata4.00: exception Emask 0x10 SAct 0x200000 SErr 0x9b0000 action 0xe frozen
[Sun May 30 15:23:38 2021] ata4.00: irq_stat 0x00400000, PHY RDY changed
[Sun May 30 15:23:38 2021] ata4: SError: { PHYRdyChg PHYInt 10B8B Dispar LinkSeq }
[Sun May 30 15:23:38 2021] ata4.00: failed command: READ FPDMA QUEUED
[Sun May 30 15:23:38 2021] ata4.00: cmd 60/08:a8:18:08:00/00:00:00:00:00/40 tag 21 ncq dma 4096 in
                                    res 40/00:00:18:08:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[Sun May 30 15:23:38 2021] ata4.00: status: { DRDY }
[Sun May 30 15:23:38 2021] ata4: hard resetting link
[Sun May 30 15:23:48 2021] ata4: softreset failed (device not ready)
[Sun May 30 15:23:48 2021] ata4: hard resetting link
[Sun May 30 15:23:49 2021] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Sun May 30 15:23:49 2021] ata4.00: configured for UDMA/33
[Sun May 30 15:23:49 2021] sd 3:0:0:0: [sdd] tag#21 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 cmd_age=10s
[Sun May 30 15:23:49 2021] sd 3:0:0:0: [sdd] tag#21 Sense Key : 0x5 [current]
[Sun May 30 15:23:49 2021] sd 3:0:0:0: [sdd] tag#21 ASC=0x21 ASCQ=0x4
[Sun May 30 15:23:49 2021] sd 3:0:0:0: [sdd] tag#21 CDB: opcode=0x88 88 00 00 00 00 00 00 00 08 18 00 00 00 08 00 00
[Sun May 30 15:23:49 2021] blk_update_request: I/O error, dev sdd, sector 2072 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[Sun May 30 15:23:49 2021] ata4: EH complete
[Sun May 30 15:23:49 2021] ata4.00: exception Emask 0x10 SAct 0x8 SErr 0x9b0000 action 0xe frozen
[Sun May 30 15:23:49 2021] ata4.00: irq_stat 0x00400000, PHY RDY changed
[Sun May 30 15:23:49 2021] ata4: SError: { PHYRdyChg PHYInt 10B8B Dispar LinkSeq }
[Sun May 30 15:23:49 2021] ata4.00: failed command: READ FPDMA QUEUED
[Sun May 30 15:23:49 2021] ata4.00: cmd 60/08:18:18:08:00/00:00:00:00:00/40 tag 3 ncq dma 4096 in
                                    res 40/00:00:18:08:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[Sun May 30 15:23:49 2021] ata4.00: status: { DRDY }
[Sun May 30 15:23:49 2021] ata4: hard resetting link
[Sun May 30 15:23:59 2021] ata4: softreset failed (device not ready)
[Sun May 30 15:23:59 2021] ata4: hard resetting link
[Sun May 30 15:24:02 2021] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Sun May 30 15:24:02 2021] ata4.00: configured for UDMA/33
[Sun May 30 15:24:02 2021] ata4: EH complete
[Sun May 30 15:24:02 2021] ata4.00: exception Emask 0x10 SAct 0x400000 SErr 0x9b0000 action 0xe frozen
[Sun May 30 15:24:02 2021] ata4.00: irq_stat 0x00400000, PHY RDY changed
[Sun May 30 15:24:02 2021] ata4: SError: { PHYRdyChg PHYInt 10B8B Dispar LinkSeq }
[Sun May 30 15:24:02 2021] ata4.00: failed command: READ FPDMA QUEUED
[Sun May 30 15:24:02 2021] ata4.00: cmd 60/08:b0:18:08:00/00:00:00:00:00/40 tag 22 ncq dma 4096 in
                                    res 40/00:00:18:08:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[Sun May 30 15:24:02 2021] ata4.00: status: { DRDY }
[Sun May 30 15:24:02 2021] ata4: hard resetting link
[Sun May 30 15:24:12 2021] ata4: softreset failed (device not ready)
[Sun May 30 15:24:12 2021] ata4: hard resetting link
[Sun May 30 15:24:13 2021] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Sun May 30 15:24:14 2021] ata4.00: configured for UDMA/33
[Sun May 30 15:24:14 2021] ata4: EH complete
[Sun May 30 15:24:24 2021] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Sun May 30 15:24:24 2021] ata4.00: configured for UDMA/33

Hors ligne

#8 30-05-2021 15:57:07

raleur
Membre
Inscription : 03-10-2014

Re : [RESOLU] [DD : Erreur entrée/sortie] : suite à interruption rsync

Je ne connais pas cette erreur. Ça ne ressemble pas à des secteurs défectueux.
Et pendant ce temps la partition 2 reste accessible ?

Il vaut mieux montrer que raconter.

Hors ligne

#9 30-05-2021 16:05:25

Maknho
Membre
Distrib. : Debian GNU/Linux 10.4
Noyau : Linux 4.19.0-9-amd64
(G)UI : Xfce
Inscription : 01-06-2020

Re : [RESOLU] [DD : Erreur entrée/sortie] : suite à interruption rsync

Et pendant ce temps la partition 2 reste accessible ?



Oui j'y accède sans problème ; je peux créer des répertoires, les supprimer ...

Je ne connais pas cette erreur. Ça ne ressemble pas à des secteurs défectueux.



[ 2174.750851] blk_update_request: I/O error, dev sdd, sector 30923208 op 0x1:(WRITE) flags 0x104000 phys_seg 168 prio class 0
[ 2174.751282] sd 3:0:0:0: [sdd] tag#10 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 cmd_age=74s
[ 2174.751288] sd 3:0:0:0: [sdd] tag#10 Sense Key : 0x5 [current]
[ 2174.751292] sd 3:0:0:0: [sdd] tag#10 ASC=0x21 ASCQ=0x4
[ 2174.751297] sd 3:0:0:0: [sdd] tag#10 CDB: opcode=0x8a 8a 00 00 00 00 00 01 d7 df 08 00 00 05 40 00 00

C'est ce type d'erreur qui ne parait pas être des secteurs défectueux ?:|

[EDIT] : au début je pensais que c'était un problème de connectivité de mon disque mais après 2/3 fois que je le réinsérai proprement et en constatant que l'autre partition reste accessible je ne sais que penser....:/

Dernière modification par Maknho (30-05-2021 16:09:05)

Hors ligne

#10 30-05-2021 16:17:31

raleur
Membre
Inscription : 03-10-2014

Re : [RESOLU] [DD : Erreur entrée/sortie] : suite à interruption rsync

Oui. Je n'avais pas vu ton avant-dernier messages où on voit des "ATA bus error", donc des erreurs de liaison SATA, en plus des échecs de réinitialisation. C'est pourquoi je suis d'autant plus surpris que l'autre partition soit accessible. Tu as essayé de démonter et remonter la partition 2 pour éliminer tout effet du cache, lu des données écrites avant le démontage ?

Il vaut mieux montrer que raconter.

Hors ligne

#11 30-05-2021 16:29:04

Maknho
Membre
Distrib. : Debian GNU/Linux 10.4
Noyau : Linux 4.19.0-9-amd64
(G)UI : Xfce
Inscription : 01-06-2020

Re : [RESOLU] [DD : Erreur entrée/sortie] : suite à interruption rsync

Tu as essayé de démonter et remonter la partition 2 pour éliminer tout effet du cache, lu des données écrites avant le démontage ?



Et bien j'ai éteint et redémarré, puis fait un cryptsetup luksOpen /dev/sdd2 synchro_5To_serveur

Ce qui devrait avoir éliminé tout effet du cache non ?

[EDIT] : je corrige : la partition 2 est indiquée comme protégé en écriture au bout de 5 minutes d'écriture de fichiers divers.

[EDIT] : c'est donc un problème de connectivité ?

Dernière modification par Maknho (30-05-2021 16:34:36)

Hors ligne

#12 30-05-2021 16:50:41

raleur
Membre
Inscription : 03-10-2014

Re : [RESOLU] [DD : Erreur entrée/sortie] : suite à interruption rsync

C'est ce que je craignais. Quand le problème se produit, il affecte tout le disque.
Ça peut provenir de beaucoup de choses : le disque, le câble, les connecteurs, le port de la carte mère, l'alimentation, une incompatibilité entre le disque et le contrôleur ou le pilote SATA du noyau... Pour déterminer l'élément en cause, il faudrait tester le disque dans une autre machine puis faire des tests croisés en changeant un élément à la fois.

Il vaut mieux montrer que raconter.

Hors ligne

#13 30-05-2021 21:09:56

Maknho
Membre
Distrib. : Debian GNU/Linux 10.4
Noyau : Linux 4.19.0-9-amd64
(G)UI : Xfce
Inscription : 01-06-2020

Re : [RESOLU] [DD : Erreur entrée/sortie] : suite à interruption rsync

Hello raleur,

j'ai vérifié côté connexion (qui était le plus probable vu que j'ai monté moi-même le NAS smile) et c'était effectivement un problème de connexions.

Je te remercie beaucoup raleur pour m'avoir forcé à vérifier de ce côté la.

Il semble que ça soit bon maintenant côté disque et , sauf erreur, je n'ai pas vu dans les sorties (cf supra) de secteurs endommagés ?

Hors ligne

#14 31-05-2021 20:21:15

raleur
Membre
Inscription : 03-10-2014

Re : [RESOLU] [DD : Erreur entrée/sortie] : suite à interruption rsync

Non, moi non plus.

Il vaut mieux montrer que raconter.

Hors ligne

#15 05-06-2021 08:44:31

Maknho
Membre
Distrib. : Debian GNU/Linux 10.4
Noyau : Linux 4.19.0-9-amd64
(G)UI : Xfce
Inscription : 01-06-2020

Re : [RESOLU] [DD : Erreur entrée/sortie] : suite à interruption rsync

Merci beaucoup raleur.

Bon WE

Hors ligne

Pied de page des forums