Debian Bullseye Laptop Graphique Intel/NVidia Configuration Xorg.conf

Dji-pi-dji · 08-10-2021 21:05:18

Bonjour à Tous,

Suite à installation de Debian 11 sur un laptop avec deux cartes graphiques Intel et Nvidia, j ai installé le driver de la deuxième depuis le dépôt et tous c'est bien installé (enfin je crois) ...

Le problème que je rencontre est le suivant, lorsque je configure mon fichier xorg.conf je n'ai que l'affichage depuis mon port HDMI.

1) Cas de figure numéro 1 => fichier xorg.conf => juste l'écran déporté
2) Cas de figure numéro 2 => sans le fichier xorg.conf => juste l'écran du laptop

Donc à aucun moment je n'ai les deux écrans en même temps.

Je précise que mon souhait est d'activer par défaut le GPU Nvidia pour l'écran du laptop et si besoin pour l'écran déporté.

Par avance merci pour m'avoir lu et Merci pour ce que vous faites sur ce site !

Pour étoffer, je vous transmets quelques retour de commandes.

glxinfo | grep OpenGL
OpenGL vendor string: NVIDIA Corporation
OpenGL renderer string: GeForce RTX 2060/PCIe/SSE2
OpenGL core profile version string: 4.6.0 NVIDIA 460.91.03
OpenGL core profile shading language version string: 4.60 NVIDIA
OpenGL core profile context flags: (none)
OpenGL core profile profile mask: core profile
OpenGL core profile extensions:
OpenGL version string: 4.6.0 NVIDIA 460.91.03
OpenGL shading language version string: 4.60 NVIDIA
OpenGL context flags: (none)
OpenGL profile mask: (none)
OpenGL extensions:
OpenGL ES profile version string: OpenGL ES 3.2 NVIDIA 460.91.03
OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.20
OpenGL ES profile extensions:

xrandr --listproviders :

Providers: number : 2
Provider 0: id: 0x1b8 cap: 0x1, Source Output crtcs: 4 outputs: 6 associated providers: 0 name:NVIDIA-0
Provider 1: id: 0x202 cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 3 outputs: 1 associated providers: 0 name:modesetting

Dernière modification par Dji-pi-dji (08-10-2021 21:07:07)

anonyme · 08-10-2021 22:40:35

Bonsoir
faut pas acheter ce genre de matériel
il ne faut pas installer le driver nvidia si c'est un système "bumblebee
pour le xorg.conf , je n'ai pas le contenu , mais je suppose que tu a choisi comme driver "nvidia"
pour activer les deux sorties je sais pas faire sur ce genre de matériel
mais si je dois dépanner ce genre de portable , je commence par vérifier le fonctionnement du gpu intel , sont firmware nonfree et si les sorties interne et externe (deux écrans ) fonctionnent
pour les informations on voit une GTX2060M et un driver nvidia de Bullseye
si tu veut des réponses , un minimum donner le lspci

lspci

 

et les erreurs

journalctl -b -r -p err

 

et si tu peut renseigner ton profil (type de bureau etc ...........)

Dji-pi-dji · 09-10-2021 00:03:46

Bonsoir anonyme,

Merci pour ton retour, pour le bureau c'est gnome 3.38.5

Voici les retours de commandes ;

00:00.0 Host bridge: Intel Corporation 10th Gen Core Processor Host Bridge/DRAM Registers (rev 02)
00:01.0 PCI bridge: Intel Corporation 6th-10th Gen Core Processor PCIe Controller (x16) (rev 02)
00:02.0 VGA compatible controller: Intel Corporation CometLake-H GT2 [UHD Graphics] (rev 05)
00:04.0 Signal processing controller: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Thermal Subsystem (rev 02)
00:12.0 Signal processing controller: Intel Corporation Comet Lake PCH Thermal Controller
00:14.0 USB controller: Intel Corporation Comet Lake USB 3.1 xHCI Host Controller
00:14.2 RAM memory: Intel Corporation Comet Lake PCH Shared SRAM
00:14.3 Network controller: Intel Corporation Comet Lake PCH CNVi WiFi
00:15.0 Serial bus controller [0c80]: Intel Corporation Comet Lake PCH Serial IO I2C Controller #0
00:15.2 Serial bus controller [0c80]: Intel Corporation Comet Lake PCH Serial IO I2C Controller #2
00:16.0 Communication controller: Intel Corporation Comet Lake HECI Controller
00:1b.0 PCI bridge: Intel Corporation Comet Lake PCI Express Root Port #17 (rev f0)
00:1b.4 PCI bridge: Intel Corporation Comet Lake PCI Express Root Port #21 (rev f0)
00:1d.0 PCI bridge: Intel Corporation Comet Lake PCI Express Root Port #9 (rev f0)
00:1d.6 PCI bridge: Intel Corporation Device 06b6 (rev f0)
00:1d.7 PCI bridge: Intel Corporation Device 06b7 (rev f0)
00:1f.0 ISA bridge: Intel Corporation Comet Lake LPC Controller
00:1f.3 Audio device: Intel Corporation Comet Lake PCH cAVS
00:1f.4 SMBus: Intel Corporation Comet Lake PCH SMBus Controller
00:1f.5 Serial bus controller [0c80]: Intel Corporation Comet Lake PCH SPI Controller
01:00.0 VGA compatible controller: NVIDIA Corporation TU106M [GeForce RTX 2060 Mobile] (rev a1)
01:00.1 Audio device: NVIDIA Corporation TU106 High Definition Audio Controller (rev a1)
01:00.2 USB controller: NVIDIA Corporation TU106 USB 3.1 Host Controller (rev a1)
01:00.3 Serial bus controller [0c80]: NVIDIA Corporation TU106 USB Type-C UCSI Controller (rev a1)
02:00.0 PCI bridge: Intel Corporation JHL7540 Thunderbolt 3 Bridge [Titan Ridge 2C 2018] (rev 06)
03:00.0 PCI bridge: Intel Corporation JHL7540 Thunderbolt 3 Bridge [Titan Ridge 2C 2018] (rev 06)
03:01.0 PCI bridge: Intel Corporation JHL7540 Thunderbolt 3 Bridge [Titan Ridge 2C 2018] (rev 06)
03:02.0 PCI bridge: Intel Corporation JHL7540 Thunderbolt 3 Bridge [Titan Ridge 2C 2018] (rev 06)
04:00.0 System peripheral: Intel Corporation JHL7540 Thunderbolt 3 NHI [Titan Ridge 2C 2018] (rev 06)
3a:00.0 USB controller: Intel Corporation JHL7540 Thunderbolt 3 USB Controller [Titan Ridge 2C 2018] (rev 06)
3b:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd NVMe SSD Controller SM981/PM981/PM983
3c:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd NVMe SSD Controller SM981/PM981/PM983
3d:00.0 Ethernet controller: Intel Corporation Ethernet Controller I225-V (rev 01)
3e:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5260 PCI Express Card Reader (rev 01)

oct. 08 23:55:43 MSI-RR kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=23035 end=23036) time 246 us, min 2146, max 2159, scanline start 2140, end 2171
oct. 08 23:53:53 MSI-RR kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=16430 end=16431) time 230 us, min 2146, max 2159, scanline start 2132, end 2161
oct. 08 23:42:45 MSI-RR kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=8298 end=8299) time 205 us, min 2146, max 2159, scanline start 2137, end 2164
oct. 08 23:13:40 MSI-RR systemd[1469]: Failed to start Application launched by gnome-session-binary.
oct. 08 23:13:39 MSI-RR bluetoothd[824]: src/profile.c:ext_start_servers() RFCOMM server failed for Headset unit: rfcomm_bind: Address already in use (98)
oct. 08 23:13:39 MSI-RR bluetoothd[824]: src/profile.c:ext_start_servers() RFCOMM server failed for Headset Voice gateway: rfcomm_bind: Address already in use (98)
oct. 08 23:13:38 MSI-RR pipewire[1489]: Failed to receive portal pid: org.freedesktop.DBus.Error.NameHasNoOwner: Could not get PID of name 'org.freedesktop.portal.Desktop': no such name
oct. 08 23:13:38 MSI-RR gdm-password][1463]: gkr-pam: unable to locate daemon control file
oct. 08 23:13:34 MSI-RR bluetoothd[824]: Failed to set mode: Blocked through rfkill (0x12)
oct. 08 23:13:32 MSI-RR pipewire[989]: Failed to receive portal pid: org.freedesktop.DBus.Error.NameHasNoOwner: Could not get PID of name 'org.freedesktop.portal.Desktop': no such name
oct. 08 23:13:32 MSI-RR bluetoothd[824]: Failed to set mode: Blocked through rfkill (0x12)
oct. 08 23:13:32 MSI-RR bluetoothd[824]: sap-server: Operation not permitted (1)
oct. 08 23:13:32 MSI-RR bluetoothd[824]: profiles/sap/server.c:sap_server_register() Sap driver initialization failed.
oct. 08 23:13:31 MSI-RR kernel: firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware
oct. 08 23:13:31 MSI-RR kernel: iwlwifi 0000:00:14.3: firmware: failed to load iwl-debug-yoyo.bin (-2)
oct. 08 23:13:31 MSI-RR kernel:
oct. 08 23:13:31 MSI-RR kernel: ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20200925/psobject-220)
oct. 08 23:13:31 MSI-RR kernel: ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.RP17.PXSX.TBDU], AE_ALREADY_EXISTS (20200925/dswload2-326)

Aussi, je n'ai pas installé bumblebee sur cette install et optimus ne prend pas en charge cette carte graphique, j ai donc tenté avec X11 et le driver à disposition dans le dépot

Depuis le premier post de ce soir, j ai continué de tester plusieurs fichiers de conf xorg, mais toujours en vain ...

Encore merci pour ton aide !

anonyme · 09-10-2021 18:23:52

Bonjour

apt --reinstall install firmware-iwlwifi

 

ça doit résoudre ceci

oct. 08 23:13:31 MSI-RR kernel: iwlwifi 0000:00:14.3: firmware: failed to load iwl-debug-yoyo.bin (-2)

 

pour le gpu intel

apt --reinstall install firmware-misc-nonfree

 

je me pose la question si bookworm ne sera pas mieux (actuel testing)
je ne connais pas ce nouveau igpu intel
tu a deux carte "VGA" donc oui bumblebee par forcément nécessaire
ceci

oct. 08 23:55:43 MSI-RR kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=23035 end=23036) time 246 us, min 2146, max 2159, scanline start 2140, end 2171

oct. 08 23:53:53 MSI-RR kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=16430 end=16431) time 230 us, min 2146, max 2159, scanline start 2132, end 2161

oct. 08 23:42:45 MSI-RR kernel: i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=8298 end=8299) time 205 us, min 2146, max 2159, scanline start 2137, end 2164

un bug ou le firmware pas correct

il faut regarder le log de X pour comprendre ce qui cloche

en plus tu est sous gnome , donc soit wayland , soit X

le retour de : (je vois pas d'erreur de drm , cela risque d'être un bug )

dmesg | grep -i drm

 

pour le xorg.conf un peu tôt , si le matériel est mal reconnu

Dernière modification par anonyme (09-10-2021 18:39:32)

Dji-pi-dji · 09-10-2021 18:54:15

Bonjour anonyme !

Merci pour ton retour ! J'ai passé les deux commandes indiquées et c est OK plus de messages dans le boot.log ! Merci !

Je te donne le Xorg.0.log de ce jour, j ai continué de tester des versions du fichier de conf xorg.conf mais sans résultat, toujours 1 écran à la fois

En fin d'aprem j ai meme tenté un bumblebee-nvidia ... (le désespoir à priori)

Et le cpu c est : Intel(R) Core(TM) i7-10875H CPU @ 2.30GHz

C est bien X11 pour la gestion de l affichage

Le contenu des logs

root@MSI-RR:~# cat /var/log/Xorg.0.log

[     6.371] (--) Log file renamed from "/var/log/Xorg.pid-1060.log" to "/var/log/Xorg.0.log"

[     6.374] 

X.Org X Server 1.20.11

X Protocol Version 11, Revision 0

[     6.374] Build Operating System: linux Debian

[     6.374] Current Operating System: Linux MSI-RR 5.10.0-8-amd64 #1 SMP Debian 5.10.46-5 (2021-09-23) x86_64

[     6.374] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.10.0-8-amd64 root=/dev/mapper/LVM--MSI--RR-ROOT ro quiet

[     6.374] Build Date: 13 April 2021  04:07:31PM

[     6.374] xorg-server 2:1.20.11-1 ([url]https://www.debian.org/support[/url]) 

[     6.374] Current version of pixman: 0.40.0

[     6.374]  Before reporting problems, check [url]http://wiki.x.org[/url]

  to make sure that you have the latest version.

[     6.374] Markers: (--) probed, (**) from config file, (==) default setting,

  (++) from command line, (!!) notice, (II) informational,

  (WW) warning, (EE) error, (NI) not implemented, (??) unknown.

[     6.374] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Oct  9 18:46:33 2021

[     6.375] (==) Using system config directory "/usr/share/X11/xorg.conf.d"

[     6.375] (==) No Layout section.  Using the first Screen section.

[     6.375] (==) No screen section available. Using defaults.

[     6.375] (**) |-->Screen "Default Screen Section" (0)

[     6.375] (**) |   |-->Monitor "<default monitor>"

[     6.376] (==) No monitor specified for screen "Default Screen Section".

  Using a default monitor configuration.

[     6.376] (==) Automatically adding devices

[     6.376] (==) Automatically enabling devices

[     6.376] (==) Automatically adding GPU devices

[     6.376] (==) Max clients allowed: 256, resource mask: 0x1fffff

[     6.376] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/X11/cyrillic".

[     6.376]  Entry deleted from font path.

[     6.376]  (Run 'mkfontdir' on "/usr/share/fonts/X11/cyrillic").

[     6.377] (==) FontPath set to:

  /usr/share/fonts/X11/misc,

  /usr/share/fonts/X11/100dpi/:unscaled,

  /usr/share/fonts/X11/75dpi/:unscaled,

  /usr/share/fonts/X11/Type1,

  /usr/share/fonts/X11/100dpi,

  /usr/share/fonts/X11/75dpi,

  built-ins

[     6.377] (==) ModulePath set to "/usr/lib/xorg/modules"

[     6.377] (II) The server relies on udev to provide the list of input devices.

  If no devices become available, reconfigure udev or disable AutoAddDevices.

[     6.377] (II) Loader magic: 0x55f0da80ae40

[     6.377] (II) Module ABI versions:

[     6.377]  X.Org ANSI C Emulation: 0.4

[     6.377]  X.Org Video Driver: 24.1

[     6.377]  X.Org XInput driver : 24.1

[     6.377]  X.Org Server Extension : 10.0

[     6.377] (++) using VT number 1

[     6.379] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1

[     6.380] (II) xfree86: Adding drm device (/dev/dri/card1)

[     6.380] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 14 paused 0

[     6.380] (II) xfree86: Adding drm device (/dev/dri/card0)

[     6.381] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 15 paused 0

[     6.384] (--) PCI:*(0@0:2:0) 8086:9bc4:1462:12c6 rev 5, Mem @ 0xab000000/16777216, 0x40000000/268435456, I/O @ 0x00004000/64, BIOS @ 0x????????/131072

[     6.385] (--) PCI: (1@0:0:0) 10de:1f15:1462:12c6 rev 161, Mem @ 0xac000000/16777216, 0x80000000/268435456, 0x90000000/33554432, I/O @ 0x00003000/128, BIOS @ 0x????????/524288

[     6.385] (II) LoadModule: "glx"

[     6.385] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so

[     6.386] (II) Module glx: vendor="X.Org Foundation"

[     6.386]  compiled for 1.20.11, module version = 1.0.0

[     6.386]  ABI class: X.Org Server Extension, version 10.0

[     6.386] (II) Applying OutputClass "nvidia" to /dev/dri/card1

[     6.386]  loading driver: nvidia

[     6.491] (==) Matched nvidia as autoconfigured driver 0

[     6.491] (==) Matched nouveau as autoconfigured driver 1

[     6.491] (==) Matched nv as autoconfigured driver 2

[     6.491] (==) Matched modesetting as autoconfigured driver 3

[     6.491] (==) Matched fbdev as autoconfigured driver 4

[     6.491] (==) Matched vesa as autoconfigured driver 5

[     6.491] (==) Assigned the driver to the xf86ConfigLayout

[     6.491] (II) LoadModule: "nvidia"

[     6.492] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so

[     6.494] (II) Module nvidia: vendor="NVIDIA Corporation"

[     6.494]  compiled for 1.6.99.901, module version = 1.0.0

[     6.494]  Module class: X.Org Video Driver

[     6.494] (II) LoadModule: "nouveau"

[     6.495] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so

[     6.495] (II) Module nouveau: vendor="X.Org Foundation"

[     6.495]  compiled for 1.20.10, module version = 1.0.17

[     6.495]  Module class: X.Org Video Driver

[     6.495]  ABI class: X.Org Video Driver, version 24.1

[     6.495] (II) LoadModule: "nv"

[     6.496] (WW) Warning, couldn't open module nv

[     6.496] (EE) Failed to load module "nv" (module does not exist, 0)

[     6.496] (II) LoadModule: "modesetting"

[     6.496] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so

[     6.496] (II) Module modesetting: vendor="X.Org Foundation"

[     6.496]  compiled for 1.20.11, module version = 1.20.11

[     6.496]  Module class: X.Org Video Driver

[     6.496]  ABI class: X.Org Video Driver, version 24.1

[     6.496] (II) LoadModule: "fbdev"

[     6.496] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so

[     6.497] (II) Module fbdev: vendor="X.Org Foundation"

[     6.497]  compiled for 1.20.0, module version = 0.5.0

[     6.497]  Module class: X.Org Video Driver

[     6.497]  ABI class: X.Org Video Driver, version 24.0

[     6.497] (II) LoadModule: "vesa"

[     6.497] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so

[     6.497] (II) Module vesa: vendor="X.Org Foundation"

[     6.497]  compiled for 1.20.9, module version = 2.5.0

[     6.497]  Module class: X.Org Video Driver

[     6.497]  ABI class: X.Org Video Driver, version 24.1

[     6.497] (II) NVIDIA dlloader X Driver  460.91.03  Fri Jul  2 05:48:55 UTC 2021

[     6.497] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs

[     6.497] (II) NOUVEAU driver Date:   Sat Jan 23 12:24:42 2021 -0500

[     6.497] (II) NOUVEAU driver for NVIDIA chipset families :

[     6.497]  RIVA TNT            (NV04)

[     6.497]  RIVA TNT2           (NV05)

[     6.497]  GeForce 256         (NV10)

[     6.497]  GeForce 2           (NV11, NV15)

[     6.497]  GeForce 4MX         (NV17, NV18)

[     6.497]  GeForce 3           (NV20)

[     6.497]  GeForce 4Ti         (NV25, NV28)

[     6.498]  GeForce FX          (NV3x)

[     6.498]  GeForce 6           (NV4x)

[     6.498]  GeForce 7           (G7x)

[     6.498]  GeForce 8           (G8x)

[     6.498]  GeForce 9           (G9x)

[     6.498]  GeForce GTX 2xx/3xx (GT2xx)

[     6.498]  GeForce GTX 4xx/5xx (GFxxx)

[     6.498]  GeForce GTX 6xx/7xx (GKxxx)

[     6.498]  GeForce GTX 9xx     (GMxxx)

[     6.498]  GeForce GTX 10xx    (GPxxx)

[     6.498] (II) modesetting: Driver for Modesetting Kernel Drivers: kms

[     6.498] (II) FBDEV: driver for framebuffer: fbdev

[     6.498] (II) VESA: driver for VESA chipsets: vesa

[     6.498] (II) modeset(0): using drv /dev/dri/card0

[     6.498] (WW) Falling back to old probe method for fbdev

[     6.498] (II) Loading sub module "fbdevhw"

[     6.498] (II) LoadModule: "fbdevhw"

[     6.498] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so

[     6.498] (II) Module fbdevhw: vendor="X.Org Foundation"

[     6.498]  compiled for 1.20.11, module version = 0.0.2

[     6.498]  ABI class: X.Org Video Driver, version 24.1

[     6.499] (II) systemd-logind: releasing fd for 226:1

[     6.499] (II) Loading sub module "fb"

[     6.499] (II) LoadModule: "fb"

[     6.499] (II) Loading /usr/lib/xorg/modules/libfb.so

[     6.500] (II) Module fb: vendor="X.Org Foundation"

[     6.500]  compiled for 1.20.11, module version = 1.0.0

[     6.500]  ABI class: X.Org ANSI C Emulation, version 0.4

[     6.500] (II) Loading sub module "wfb"

[     6.500] (II) LoadModule: "wfb"

[     6.500] (II) Loading /usr/lib/xorg/modules/libwfb.so

[     6.501] (II) Module wfb: vendor="X.Org Foundation"

[     6.501]  compiled for 1.20.11, module version = 1.0.0

[     6.501]  ABI class: X.Org ANSI C Emulation, version 0.4

[     6.501] (II) Loading sub module "ramdac"

[     6.501] (II) LoadModule: "ramdac"

[     6.501] (II) Module "ramdac" already built-in

[     7.979] (II) modeset(0): Creating default Display subsection in Screen section

  "Default Screen Section" for depth/fbbpp 24/32

[     7.979] (==) modeset(0): Depth 24, (==) framebuffer bpp 32

[     7.979] (==) modeset(0): RGB weight 888

[     7.979] (==) modeset(0): Default visual is TrueColor

[     7.979] (II) Loading sub module "glamoregl"

[     7.979] (II) LoadModule: "glamoregl"

[     7.979] (II) Loading /usr/lib/xorg/modules/libglamoregl.so

[     7.985] (II) Module glamoregl: vendor="X.Org Foundation"

[     7.985]  compiled for 1.20.11, module version = 1.0.1

[     7.985]  ABI class: X.Org ANSI C Emulation, version 0.4

[     8.158] (II) modeset(0): glamor X acceleration enabled on Mesa Intel(R) UHD Graphics (CML GT2)

[     8.158] (II) modeset(0): glamor initialized

[     8.159] (II) modeset(0): Output eDP-1 has no monitor section

[     8.160] (II) modeset(0): EDID for output eDP-1

[     8.160] (II) modeset(0): Manufacturer: SHP  Model: 14a1  Serial#: 0

[     8.160] (II) modeset(0): Year: 2018  Week: 22

[     8.160] (II) modeset(0): EDID Version: 1.4

[     8.160] (II) modeset(0): Digital Display Input

[     8.160] (II) modeset(0): 8 bits per channel

[     8.160] (II) modeset(0): Digital interface is DisplayPort

[     8.160] (II) modeset(0): Max Image Size [cm]: horiz.: 34  vert.: 19

[     8.160] (II) modeset(0): Gamma: 2.20

[     8.160] (II) modeset(0): No DPMS capabilities specified

[     8.160] (II) modeset(0): Supported color encodings: RGB 4:4:4 

[     8.160] (II) modeset(0): Default color space is primary color space

[     8.160] (II) modeset(0): First detailed timing is preferred mode

[     8.160] (II) modeset(0): Preferred mode is native pixel format and refresh rate

[     8.160] (II) modeset(0): redX: 0.640 redY: 0.329   greenX: 0.210 greenY: 0.710

[     8.160] (II) modeset(0): blueX: 0.149 blueY: 0.060   whiteX: 0.312 whiteY: 0.328

[     8.160] (II) modeset(0): Manufacturer's mask: 0

[     8.160] (II) modeset(0): Supported detailed timing:

[     8.160] (II) modeset(0): clock: 533.3 MHz   Image Size:  344 x 194 mm

[     8.160] (II) modeset(0): h_active: 3840  h_sync: 3888  h_sync_end 3920 h_blank_end 4000 h_border: 0

[     8.160] (II) modeset(0): v_active: 2160  v_sync: 2163  v_sync_end 2168 v_blanking: 2222 v_border: 0

[     8.160] (II) modeset(0):  LQ156D1JW42

[     8.160] (II) modeset(0): EDID (in hex):

[     8.160] (II) modeset(0):   00ffffffffffff004d10a11400000000

[     8.160] (II) modeset(0):   161c0104a522137806df50a35435b526

[     8.160] (II) modeset(0):   0f505400000001010101010101010101

[     8.160] (II) modeset(0):   01010101010150d000a0f0703e803020

[     8.160] (II) modeset(0):   350058c2100000180000001000000000

[     8.160] (II) modeset(0):   00000000000000000000000000100000

[     8.160] (II) modeset(0):   000000000000000000000000000000fe

[     8.160] (II) modeset(0):   004c5131353644314a5734320a2000ca

[     8.161] (II) modeset(0): Printing probed modes for output eDP-1

[     8.161] (II) modeset(0): Modeline "3840x2160"x60.0  533.28  3840 3888 3920 4000  2160 2163 2168 2222 -hsync -vsync (133.3 kHz eP)

[     8.161] (II) modeset(0): Modeline "3840x2160"x60.0  712.75  3840 4160 4576 5312  2160 2163 2168 2237 -hsync +vsync (134.2 kHz d)

[     8.161] (II) modeset(0): Modeline "3840x2160"x60.0  533.00  3840 3888 3920 4000  2160 2163 2168 2222 +hsync -vsync (133.2 kHz d)

[     8.161] (II) modeset(0): Modeline "3200x1800"x60.0  492.00  3200 3456 3800 4400  1800 1803 1808 1865 -hsync +vsync (111.8 kHz d)

[     8.161] (II) modeset(0): Modeline "3200x1800"x59.9  373.00  3200 3248 3280 3360  1800 1803 1808 1852 +hsync -vsync (111.0 kHz d)

[     8.161] (II) modeset(0): Modeline "2880x1620"x60.0  396.25  2880 3096 3408 3936  1620 1623 1628 1679 -hsync +vsync (100.7 kHz d)

[     8.161] (II) modeset(0): Modeline "2880x1620"x60.0  303.75  2880 2928 2960 3040  1620 1623 1628 1666 +hsync -vsync (99.9 kHz d)

[     8.161] (II) modeset(0): Modeline "2560x1600"x60.0  348.50  2560 2760 3032 3504  1600 1603 1609 1658 -hsync +vsync (99.5 kHz d)

[     8.161] (II) modeset(0): Modeline "2560x1600"x60.0  268.50  2560 2608 2640 2720  1600 1603 1609 1646 +hsync -vsync (98.7 kHz d)

[     8.161] (II) modeset(0): Modeline "2560x1440"x120.0  638.25  2560 2780 3064 3568  1440 1441 1444 1491 doublescan -hsync +vsync (178.9 kHz d)

[     8.161] (II) modeset(0): Modeline "2560x1440"x120.0  469.12  2560 2584 2600 2640  1440 1441 1444 1481 doublescan +hsync -vsync (177.7 kHz d)

[     8.161] (II) modeset(0): Modeline "2560x1440"x60.0  312.25  2560 2752 3024 3488  1440 1443 1448 1493 -hsync +vsync (89.5 kHz d)

[     8.161] (II) modeset(0): Modeline "2560x1440"x60.0  241.50  2560 2608 2640 2720  1440 1443 1448 1481 +hsync -vsync (88.8 kHz d)

[     8.161] (II) modeset(0): Modeline "2048x1536"x60.0  266.95  2048 2200 2424 2800  1536 1537 1540 1589 -hsync +vsync (95.3 kHz d)

[     8.161] (II) modeset(0): Modeline "1920x1440"x60.0  234.00  1920 2048 2256 2600  1440 1441 1444 1500 -hsync +vsync (90.0 kHz d)

[     8.161] (II) modeset(0): Modeline "1856x1392"x60.0  218.30  1856 1952 2176 2528  1392 1393 1396 1439 -hsync +vsync (86.4 kHz d)

[     8.161] (II) modeset(0): Modeline "1792x1344"x60.0  204.80  1792 1920 2120 2448  1344 1345 1348 1394 -hsync +vsync (83.7 kHz d)

[     8.161] (II) modeset(0): Modeline "2048x1152"x120.0  406.50  2048 2220 2444 2840  1152 1153 1156 1193 doublescan -hsync +vsync (143.1 kHz d)

[     8.161] (II) modeset(0): Modeline "2048x1152"x120.0  302.50  2048 2072 2088 2128  1152 1153 1156 1185 doublescan +hsync -vsync (142.2 kHz d)

[     8.161] (II) modeset(0): Modeline "2048x1152"x59.9  197.00  2048 2184 2400 2752  1152 1155 1160 1195 -hsync +vsync (71.6 kHz d)

[     8.161] (II) modeset(0): Modeline "2048x1152"x59.9  156.75  2048 2096 2128 2208  1152 1155 1160 1185 +hsync -vsync (71.0 kHz d)

[     8.161] (II) modeset(0): Modeline "1920x1200"x59.9  193.25  1920 2056 2256 2592  1200 1203 1209 1245 -hsync +vsync (74.6 kHz d)

[     8.161] (II) modeset(0): Modeline "1920x1200"x60.0  154.00  1920 1968 2000 2080  1200 1203 1209 1235 +hsync -vsync (74.0 kHz d)

[     8.161] (II) modeset(0): Modeline "1920x1080"x120.0  356.38  1920 2080 2288 2656  1080 1081 1084 1118 doublescan -hsync +vsync (134.2 kHz d)

[     8.161] (II) modeset(0): Modeline "1920x1080"x119.9  266.50  1920 1944 1960 2000  1080 1081 1084 1111 doublescan +hsync -vsync (133.2 kHz d)

[     8.161] (II) modeset(0): Modeline "1920x1080"x60.0  173.00  1920 2048 2248 2576  1080 1083 1088 1120 -hsync +vsync (67.2 kHz d)

[     8.161] (II) modeset(0): Modeline "1920x1080"x59.9  138.50  1920 1968 2000 2080  1080 1083 1088 1111 +hsync -vsync (66.6 kHz d)

[     8.161] (II) modeset(0): Modeline "1600x1200"x60.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz d)

[     8.161] (II) modeset(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz d)

[     8.161] (II) modeset(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz d)

[     8.161] (II) modeset(0): Modeline "1600x1024"x60.2  103.12  1600 1600 1656 1664  1024 1024 1029 1030 +hsync +vsync (62.0 kHz d)

[     8.161] (II) modeset(0): Modeline "1400x1050"x60.0  122.00  1400 1488 1640 1880  1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)

[     8.161] (II) modeset(0): Modeline "1600x900"x120.0  246.00  1600 1728 1900 2200  900 901 904 932 doublescan -hsync +vsync (111.8 kHz d)

[     8.161] (II) modeset(0): Modeline "1600x900"x119.9  186.50  1600 1624 1640 1680  900 901 904 926 doublescan +hsync -vsync (111.0 kHz d)

[     8.161] (II) modeset(0): Modeline "1600x900"x59.9  118.25  1600 1696 1856 2112  900 903 908 934 -hsync +vsync (56.0 kHz d)

[     8.161] (II) modeset(0): Modeline "1600x900"x59.8   97.50  1600 1648 1680 1760  900 903 908 926 +hsync -vsync (55.4 kHz d)

[     8.161] (II) modeset(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)

[     8.161] (II) modeset(0): Modeline "1440x900"x59.9  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz d)

[     8.161] (II) modeset(0): Modeline "1400x900"x60.0  103.50  1400 1480 1624 1848  900 903 913 934 -hsync +vsync (56.0 kHz d)

[     8.161] (II) modeset(0): Modeline "1400x900"x59.9   86.50  1400 1448 1480 1560  900 903 913 926 +hsync -vsync (55.4 kHz d)

[     8.161] (II) modeset(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz d)

[     8.161] (II) modeset(0): Modeline "1440x810"x120.0  198.12  1440 1548 1704 1968  810 811 814 839 doublescan -hsync +vsync (100.7 kHz d)

[     8.161] (II) modeset(0): Modeline "1440x810"x119.9  151.88  1440 1464 1480 1520  810 811 814 833 doublescan +hsync -vsync (99.9 kHz d)

[     8.161] (II) modeset(0): Modeline "1368x768"x59.9   85.25  1368 1440 1576 1784  768 771 781 798 -hsync +vsync (47.8 kHz d)

[     8.161] (II) modeset(0): Modeline "1368x768"x59.9   72.25  1368 1416 1448 1528  768 771 781 790 +hsync -vsync (47.3 kHz d)

[     8.161] (II) modeset(0): Modeline "1360x768"x59.8   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsync (47.7 kHz d)

[     8.161] (II) modeset(0): Modeline "1360x768"x60.0   72.00  1360 1408 1440 1520  768 771 781 790 +hsync -vsync (47.4 kHz d)

[     8.161] (II) modeset(0): Modeline "1280x800"x120.0  174.25  1280 1380 1516 1752  800 801 804 829 doublescan -hsync +vsync (99.5 kHz d)

[     8.161] (II) modeset(0): Modeline "1280x800"x119.9  134.25  1280 1304 1320 1360  800 801 804 823 doublescan +hsync -vsync (98.7 kHz d)

[     8.161] (II) modeset(0): Modeline "1280x800"x59.8   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz d)

[     8.161] (II) modeset(0): Modeline "1280x800"x59.9   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz d)

[     8.161] (II) modeset(0): Modeline "1152x864"x60.0   81.62  1152 1216 1336 1520  864 865 868 895 -hsync +vsync (53.7 kHz d)

[     8.161] (II) modeset(0): Modeline "1280x720"x120.0  156.12  1280 1376 1512 1744  720 721 724 746 doublescan -hsync +vsync (89.5 kHz d)

[     8.161] (II) modeset(0): Modeline "1280x720"x120.0  120.75  1280 1304 1320 1360  720 721 724 740 doublescan +hsync -vsync (88.8 kHz d)

[     8.161] (II) modeset(0): Modeline "1280x720"x59.9   74.50  1280 1344 1472 1664  720 723 728 748 -hsync +vsync (44.8 kHz d)

[     8.161] (II) modeset(0): Modeline "1280x720"x59.7   63.75  1280 1328 1360 1440  720 723 728 741 +hsync -vsync (44.3 kHz d)

[     8.161] (II) modeset(0): Modeline "1024x768"x120.1  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)

[     8.161] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)

[     8.161] (II) modeset(0): Modeline "960x720"x120.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)

[     8.161] (II) modeset(0): Modeline "928x696"x120.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)

[     8.161] (II) modeset(0): Modeline "896x672"x120.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)

[     8.161] (II) modeset(0): Modeline "1024x576"x119.9   98.50  1024 1092 1200 1376  576 577 580 597 doublescan -hsync +vsync (71.6 kHz d)

[     8.161] (II) modeset(0): Modeline "1024x576"x119.9   78.38  1024 1048 1064 1104  576 577 580 592 doublescan +hsync -vsync (71.0 kHz d)

[     8.161] (II) modeset(0): Modeline "1024x576"x59.9   46.50  1024 1064 1160 1296  576 579 584 599 -hsync +vsync (35.9 kHz d)

[     8.161] (II) modeset(0): Modeline "1024x576"x59.8   42.00  1024 1072 1104 1184  576 579 584 593 +hsync -vsync (35.5 kHz d)

[     8.161] (II) modeset(0): Modeline "960x600"x119.9   96.62  960 1028 1128 1296  600 601 604 622 doublescan -hsync +vsync (74.6 kHz d)

[     8.161] (II) modeset(0): Modeline "960x600"x120.0   77.00  960 984 1000 1040  600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)

[     8.161] (II) modeset(0): Modeline "960x540"x119.9   86.50  960 1024 1124 1288  540 541 544 560 doublescan -hsync +vsync (67.2 kHz d)

[     8.161] (II) modeset(0): Modeline "960x540"x120.0   69.25  960 984 1000 1040  540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)

[     8.161] (II) modeset(0): Modeline "960x540"x59.6   40.75  960 992 1088 1216  540 543 548 562 -hsync +vsync (33.5 kHz d)

[     8.161] (II) modeset(0): Modeline "960x540"x59.8   37.25  960 1008 1040 1120  540 543 548 556 +hsync -vsync (33.3 kHz d)

[     8.161] (II) modeset(0): Modeline "800x600"x120.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)

[     8.161] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)

[     8.161] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)

[     8.161] (II) modeset(0): Modeline "840x525"x120.0   73.12  840 892 980 1120  525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)

[     8.161] (II) modeset(0): Modeline "840x525"x119.8   59.50  840 864 880 920  525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)

[     8.161] (II) modeset(0): Modeline "864x486"x59.9   32.50  864 888 968 1072  486 489 494 506 -hsync +vsync (30.3 kHz d)

[     8.161] (II) modeset(0): Modeline "864x486"x59.6   30.50  864 912 944 1024  486 489 494 500 +hsync -vsync (29.8 kHz d)

[     8.161] (II) modeset(0): Modeline "800x512"x120.3   51.56  800 800 828 832  512 512 514 515 doublescan +hsync +vsync (62.0 kHz d)

[     8.161] (II) modeset(0): Modeline "700x525"x120.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)

[     8.161] (II) modeset(0): Modeline "800x450"x119.9   59.12  800 848 928 1056  450 451 454 467 doublescan -hsync +vsync (56.0 kHz d)

[     8.161] (II) modeset(0): Modeline "800x450"x119.6   48.75  800 824 840 880  450 451 454 463 doublescan +hsync -vsync (55.4 kHz d)

[     8.161] (II) modeset(0): Modeline "640x512"x120.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)

[     8.161] (II) modeset(0): Modeline "720x450"x119.8   53.25  720 760 836 952  450 451 454 467 doublescan -hsync +vsync (55.9 kHz d)

[     8.161] (II) modeset(0): Modeline "700x450"x119.9   51.75  700 740 812 924  450 451 456 467 doublescan -hsync +vsync (56.0 kHz d)

[     8.161] (II) modeset(0): Modeline "700x450"x119.8   43.25  700 724 740 780  450 451 456 463 doublescan +hsync -vsync (55.4 kHz d)

[     8.161] (II) modeset(0): Modeline "640x480"x120.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)

[     8.161] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)

[     8.161] (II) modeset(0): Modeline "720x405"x59.5   22.50  720 744 808 896  405 408 413 422 -hsync +vsync (25.1 kHz d)

[     8.161] (II) modeset(0): Modeline "720x405"x59.0   21.75  720 768 800 880  405 408 413 419 +hsync -vsync (24.7 kHz d)

[     8.161] (II) modeset(0): Modeline "684x384"x119.8   42.62  684 720 788 892  384 385 390 399 doublescan -hsync +vsync (47.8 kHz d)

[     8.161] (II) modeset(0): Modeline "684x384"x119.7   36.12  684 708 724 764  384 385 390 395 doublescan +hsync -vsync (47.3 kHz d)

[     8.162] (II) modeset(0): Modeline "680x384"x119.6   42.38  680 716 784 888  384 385 390 399 doublescan -hsync +vsync (47.7 kHz d)

[     8.162] (II) modeset(0): Modeline "680x384"x119.9   36.00  680 704 720 760  384 385 390 395 doublescan +hsync -vsync (47.4 kHz d)

[     8.162] (II) modeset(0): Modeline "640x400"x119.8   41.75  640 676 740 840  400 401 404 415 doublescan -hsync +vsync (49.7 kHz d)

[     8.162] (II) modeset(0): Modeline "640x400"x120.0   35.50  640 664 680 720  400 401 404 411 doublescan +hsync -vsync (49.3 kHz d)

[     8.162] (II) modeset(0): Modeline "576x432"x120.1   40.81  576 608 668 760  432 432 434 447 doublescan -hsync +vsync (53.7 kHz d)

[     8.162] (II) modeset(0): Modeline "640x360"x119.7   37.25  640 672 736 832  360 361 364 374 doublescan -hsync +vsync (44.8 kHz d)

[     8.162] (II) modeset(0): Modeline "640x360"x119.7   31.88  640 664 680 720  360 361 364 370 doublescan +hsync -vsync (44.3 kHz d)

[     8.162] (II) modeset(0): Modeline "640x360"x59.8   18.00  640 664 720 800  360 363 368 376 -hsync +vsync (22.5 kHz d)

[     8.162] (II) modeset(0): Modeline "640x360"x59.3   17.75  640 688 720 800  360 363 368 374 +hsync -vsync (22.2 kHz d)

[     8.162] (II) modeset(0): Modeline "512x384"x120.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)

[     8.162] (II) modeset(0): Modeline "512x288"x120.0   23.25  512 532 580 648  288 289 292 299 doublescan -hsync +vsync (35.9 kHz d)

[     8.162] (II) modeset(0): Modeline "512x288"x119.8   21.00  512 536 552 592  288 289 292 296 doublescan +hsync -vsync (35.5 kHz d)

[     8.162] (II) modeset(0): Modeline "480x270"x119.3   20.38  480 496 544 608  270 271 274 281 doublescan -hsync +vsync (33.5 kHz d)

[     8.162] (II) modeset(0): Modeline "480x270"x119.6   18.62  480 504 520 560  270 271 274 278 doublescan +hsync -vsync (33.3 kHz d)

[     8.162] (II) modeset(0): Modeline "400x300"x120.6   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)

[     8.162] (II) modeset(0): Modeline "400x300"x112.7   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)

[     8.162] (II) modeset(0): Modeline "432x243"x119.8   16.25  432 444 484 536  243 244 247 253 doublescan -hsync +vsync (30.3 kHz d)

[     8.162] (II) modeset(0): Modeline "432x243"x119.1   15.25  432 456 472 512  243 244 247 250 doublescan +hsync -vsync (29.8 kHz d)

[     8.162] (II) modeset(0): Modeline "320x240"x120.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)

[     8.162] (II) modeset(0): Modeline "360x202"x119.0   11.25  360 372 404 448  202 204 206 211 doublescan -hsync +vsync (25.1 kHz d)

[     8.162] (II) modeset(0): Modeline "360x202"x118.3   10.88  360 384 400 440  202 204 206 209 doublescan +hsync -vsync (24.7 kHz d)

[     8.162] (II) modeset(0): Modeline "320x180"x119.7    9.00  320 332 360 400  180 181 184 188 doublescan -hsync +vsync (22.5 kHz d)

[     8.162] (II) modeset(0): Modeline "320x180"x118.6    8.88  320 344 360 400  180 181 184 187 doublescan +hsync -vsync (22.2 kHz d)

[     8.162] (II) modeset(0): Output eDP-1 connected

[     8.162] (II) modeset(0): Using exact sizes for initial modes

[     8.162] (II) modeset(0): Output eDP-1 using initial mode 3840x2160 +0+0

[     8.162] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)

[     8.162] (==) modeset(0): DPI set to (96, 96)

[     8.162] (II) Loading sub module "fb"

[     8.162] (II) LoadModule: "fb"

[     8.162] (II) Loading /usr/lib/xorg/modules/libfb.so

[     8.162] (II) Module fb: vendor="X.Org Foundation"

[     8.162]  compiled for 1.20.11, module version = 1.0.0

[     8.162]  ABI class: X.Org ANSI C Emulation, version 0.4

[     8.162] (==) NVIDIA(G0): Depth 24, (==) framebuffer bpp 32

[     8.162] (==) NVIDIA(G0): RGB weight 888

[     8.162] (==) NVIDIA(G0): Default visual is TrueColor

[     8.162] (==) NVIDIA(G0): Using gamma correction (1.0, 1.0, 1.0)

[     8.162] (**) NVIDIA(G0): Enabling 2D acceleration

[     8.162] (II) Loading sub module "glxserver_nvidia"

[     8.162] (II) LoadModule: "glxserver_nvidia"

[     8.162] (II) Loading /usr/lib/xorg/modules/extensions/libglxserver_nvidia.so

[     8.178] (II) Module glxserver_nvidia: vendor="NVIDIA Corporation"

[     8.178]  compiled for 1.6.99.901, module version = 1.0.0

[     8.178]  Module class: X.Org Server Extension

[     8.178] (II) NVIDIA GLX Module  460.91.03  Fri Jul  2 05:46:33 UTC 2021

[     8.178] (II) NVIDIA: The X server supports PRIME Render Offload.

[     8.204] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0

[     8.204] (--) NVIDIA(0):     DFP-0

[     8.204] (--) NVIDIA(0):     DFP-1

[     8.204] (--) NVIDIA(0):     DFP-2

[     8.204] (--) NVIDIA(0):     DFP-3

[     8.204] (--) NVIDIA(0):     DFP-4

[     8.204] (--) NVIDIA(0):     DFP-5

[     8.205] (II) NVIDIA(G0): NVIDIA GPU GeForce RTX 2060 (TU106-A) at PCI:1:0:0 (GPU-0)

[     8.205] (--) NVIDIA(G0): Memory: 6291456 kBytes

[     8.205] (--) NVIDIA(G0): VideoBIOS: 90.06.59.00.77

[     8.205] (II) NVIDIA(G0): Detected PCI Express Link width: 16X

[     8.205] (--) NVIDIA(GPU-0): DFP-0: disconnected

[     8.205] (--) NVIDIA(GPU-0): DFP-0: Internal DisplayPort

[     8.205] (--) NVIDIA(GPU-0): DFP-0: 2660.0 MHz maximum pixel clock

[     8.205] (--) NVIDIA(GPU-0): 

[     8.205] (--) NVIDIA(GPU-0): DFP-1: disconnected

[     8.205] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS

[     8.205] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock

[     8.205] (--) NVIDIA(GPU-0): 

[     8.205] (--) NVIDIA(GPU-0): DFP-2: disconnected

[     8.205] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort

[     8.205] (--) NVIDIA(GPU-0): DFP-2: 2660.0 MHz maximum pixel clock

[     8.205] (--) NVIDIA(GPU-0): 

[     8.205] (--) NVIDIA(GPU-0): DFP-3: disconnected

[     8.205] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS

[     8.205] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock

[     8.205] (--) NVIDIA(GPU-0): 

[     8.205] (--) NVIDIA(GPU-0): DFP-4: disconnected

[     8.205] (--) NVIDIA(GPU-0): DFP-4: Internal TMDS

[     8.205] (--) NVIDIA(GPU-0): DFP-4: 165.0 MHz maximum pixel clock

[     8.205] (--) NVIDIA(GPU-0): 

[     8.205] (--) NVIDIA(GPU-0): DFP-5: disconnected

[     8.205] (--) NVIDIA(GPU-0): DFP-5: Internal DisplayPort

[     8.205] (--) NVIDIA(GPU-0): DFP-5: 2660.0 MHz maximum pixel clock

[     8.205] (--) NVIDIA(GPU-0): 

[     8.206] (II) NVIDIA(G0): Validated MetaModes:

[     8.206] (II) NVIDIA(G0):     "NULL"

[     8.206] (II) NVIDIA(G0): Virtual screen size determined to be 640 x 480

[     8.206] (WW) NVIDIA(G0): Unable to get display device for DPI computation.

[     8.206] (==) NVIDIA(G0): DPI set to (75, 75); computed from built-in default

[     8.206] (II) UnloadModule: "nouveau"

[     8.206] (II) Unloading nouveau

[     8.206] (II) UnloadModule: "fbdev"

[     8.206] (II) Unloading fbdev

[     8.206] (II) UnloadSubModule: "fbdevhw"

[     8.206] (II) Unloading fbdevhw

[     8.206] (II) UnloadModule: "vesa"

[     8.206] (II) Unloading vesa

[     8.236] (==) modeset(0): Backing store enabled

[     8.236] (==) modeset(0): Silken mouse enabled

[     8.311] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.

[     8.311] (==) modeset(0): DPMS enabled

[     8.311] (II) modeset(0): [DRI2] Setup complete

[     8.311] (II) modeset(0): [DRI2]   DRI driver: iris

[     8.311] (II) modeset(0): [DRI2]   VDPAU driver: va_gl

[     8.312] (II) NVIDIA: Using 24576.00 MB of virtual memory for indirect memory

[     8.312] (II) NVIDIA:     access.

[     8.330] (II) NVIDIA(G0): ACPI: failed to connect to the ACPI event daemon; the daemon

[     8.330] (II) NVIDIA(G0):     may not be running or the "AcpidSocketPath" X

[     8.330] (II) NVIDIA(G0):     configuration option may not be set correctly.  When the

[     8.331] (II) NVIDIA(G0):     ACPI event daemon is available, the NVIDIA X driver will

[     8.331] (II) NVIDIA(G0):     try to use it to receive ACPI event notifications.  For

[     8.331] (II) NVIDIA(G0):     details, please see the "ConnectToAcpid" and

[     8.331] (II) NVIDIA(G0):     "AcpidSocketPath" X configuration options in Appendix B: X

[     8.331] (II) NVIDIA(G0):     Config Options in the README.

[     8.350] (II) NVIDIA(G0): Setting mode "NULL"

[     8.366] (==) NVIDIA(G0): Disabling shared memory pixmaps

[     8.366] (==) NVIDIA(G0): Backing store enabled

[     8.366] (==) NVIDIA(G0): Silken mouse enabled

[     8.366] (==) NVIDIA(G0): DPMS enabled

[     8.366] (II) Loading sub module "dri2"

[     8.366] (II) LoadModule: "dri2"

[     8.366] (II) Module "dri2" already built-in

[     8.366] (II) NVIDIA(G0): [DRI2] Setup complete

[     8.366] (II) NVIDIA(G0): [DRI2]   VDPAU driver: nvidia

[     8.366] (II) Initializing extension Generic Event Extension

[     8.366] (II) Initializing extension SHAPE

[     8.367] (II) Initializing extension MIT-SHM

[     8.367] (II) Initializing extension XInputExtension

[     8.367] (II) Initializing extension XTEST

[     8.367] (II) Initializing extension BIG-REQUESTS

[     8.367] (II) Initializing extension SYNC

[     8.367] (II) Initializing extension XKEYBOARD

[     8.368] (II) Initializing extension XC-MISC

[     8.368] (II) Initializing extension SECURITY

[     8.368] (II) Initializing extension XFIXES

[     8.368] (II) Initializing extension RENDER

[     8.368] (II) Initializing extension RANDR

[     8.368] (II) Initializing extension COMPOSITE

[     8.368] (II) Initializing extension DAMAGE

[     8.368] (II) Initializing extension MIT-SCREEN-SAVER

[     8.368] (II) Initializing extension DOUBLE-BUFFER

[     8.369] (II) Initializing extension RECORD

[     8.369] (II) Initializing extension DPMS

[     8.369] (II) Initializing extension Present

[     8.369] (II) Initializing extension DRI3

[     8.369] (II) Initializing extension X-Resource

[     8.369] (II) Initializing extension XVideo

[     8.369] (II) Initializing extension XVideo-MotionCompensation

[     8.369] (II) Initializing extension SELinux

[     8.369] (II) SELinux: Disabled on system

[     8.369] (II) Initializing extension GLX

[     8.369] (II) Initializing extension GLX

[     8.369] (II) Indirect GLX disabled.

[     8.375] (II) AIGLX: Loaded and initialized iris

[     8.375] (II) GLX: Initialized DRI2 GL provider for screen 0

[     8.375] (II) Initializing extension XFree86-VidModeExtension

[     8.375] (II) Initializing extension XFree86-DGA

[     8.375] (II) Initializing extension XFree86-DRI

[     8.375] (II) Initializing extension DRI2

[     8.376] (II) Initializing extension NV-GLX

[     8.376] (II) Initializing extension NV-CONTROL

[     8.377] (II) modeset(0): Damage tracking initialized

[     8.377] (II) modeset(0): Setting screen physical size to 1016 x 571

[     8.412] (II) config/udev: Adding input device Power Button (/dev/input/event9)

[     8.412] (**) Power Button: Applying InputClass "libinput keyboard catchall"

[     8.412] (II) LoadModule: "libinput"

[     8.412] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so

[     8.415] (II) Module libinput: vendor="X.Org Foundation"

[     8.415]  compiled for 1.20.8, module version = 0.30.0

[     8.415]  Module class: X.Org XInput Driver

[     8.415]  ABI class: X.Org XInput driver, version 24.1

[     8.415] (II) Using input driver 'libinput' for 'Power Button'

[     8.415] (II) systemd-logind: got fd for /dev/input/event9 13:73 fd 45 paused 0

[     8.415] (**) Power Button: always reports core events

[     8.415] (**) Option "Device" "/dev/input/event9"

[     8.415] (**) Option "_source" "server/udev"

[     8.418] (II) event9  - Power Button: is tagged by udev as: Keyboard

[     8.418] (II) event9  - Power Button: device is a keyboard

[     8.419] (II) event9  - Power Button: device removed

[     8.419] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input12/event9"

[     8.419] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)

[     8.419] (**) Option "xkb_model" "pc105"

[     8.419] (**) Option "xkb_layout" "fr"

[     8.419] (**) Option "xkb_variant" "latin9"

[     8.435] (II) event9  - Power Button: is tagged by udev as: Keyboard

[     8.435] (II) event9  - Power Button: device is a keyboard

[     8.436] (II) config/udev: Adding input device Video Bus (/dev/input/event1)

[     8.436] (**) Video Bus: Applying InputClass "libinput keyboard catchall"

[     8.436] (II) Using input driver 'libinput' for 'Video Bus'

[     8.437] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 48 paused 0

[     8.437] (**) Video Bus: always reports core events

[     8.437] (**) Option "Device" "/dev/input/event1"

[     8.437] (**) Option "_source" "server/udev"

[     8.438] (II) event1  - Video Bus: is tagged by udev as: Keyboard

[     8.438] (II) event1  - Video Bus: device is a keyboard

[     8.438] (II) event1  - Video Bus: device removed

[     8.438] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3/event1"

[     8.439] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)

[     8.439] (**) Option "xkb_model" "pc105"

[     8.439] (**) Option "xkb_layout" "fr"

[     8.439] (**) Option "xkb_variant" "latin9"

[     8.440] (II) event1  - Video Bus: is tagged by udev as: Keyboard

[     8.440] (II) event1  - Video Bus: device is a keyboard

[     8.440] (II) config/udev: Adding input device Video Bus (/dev/input/event2)

[     8.440] (**) Video Bus: Applying InputClass "libinput keyboard catchall"

[     8.440] (II) Using input driver 'libinput' for 'Video Bus'

[     8.442] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 49 paused 0

[     8.442] (**) Video Bus: always reports core events

[     8.442] (**) Option "Device" "/dev/input/event2"

[     8.442] (**) Option "_source" "server/udev"

[     8.443] (II) event2  - Video Bus: is tagged by udev as: Keyboard

[     8.443] (II) event2  - Video Bus: device is a keyboard

[     8.443] (II) event2  - Video Bus: device removed

[     8.443] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:13/LNXVIDEO:01/input/input4/event2"

[     8.443] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)

[     8.443] (**) Option "xkb_model" "pc105"

[     8.443] (**) Option "xkb_layout" "fr"

[     8.443] (**) Option "xkb_variant" "latin9"

[     8.445] (II) event2  - Video Bus: is tagged by udev as: Keyboard

[     8.445] (II) event2  - Video Bus: device is a keyboard

[     8.445] (II) config/udev: Adding input device Lid Switch (/dev/input/event6)

[     8.445] (II) No input driver specified, ignoring this device.

[     8.445] (II) This device may have been added with another device file.

[     8.446] (II) config/udev: Adding input device Power Button (/dev/input/event8)

[     8.446] (**) Power Button: Applying InputClass "libinput keyboard catchall"

[     8.446] (II) Using input driver 'libinput' for 'Power Button'

[     8.446] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 50 paused 0

[     8.446] (**) Power Button: always reports core events

[     8.446] (**) Option "Device" "/dev/input/event8"

[     8.446] (**) Option "_source" "server/udev"

[     8.447] (II) event8  - Power Button: is tagged by udev as: Keyboard

[     8.448] (II) event8  - Power Button: device is a keyboard

[     8.448] (II) event8  - Power Button: device removed

[     8.448] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input11/event8"

[     8.448] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)

[     8.448] (**) Option "xkb_model" "pc105"

[     8.448] (**) Option "xkb_layout" "fr"

[     8.448] (**) Option "xkb_variant" "latin9"

[     8.449] (II) event8  - Power Button: is tagged by udev as: Keyboard

[     8.449] (II) event8  - Power Button: device is a keyboard

[     8.449] (II) config/udev: Adding input device Sleep Button (/dev/input/event7)

[     8.449] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"

[     8.450] (II) Using input driver 'libinput' for 'Sleep Button'

[     8.450] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 51 paused 0

[     8.450] (**) Sleep Button: always reports core events

[     8.450] (**) Option "Device" "/dev/input/event7"

[     8.450] (**) Option "_source" "server/udev"

[     8.451] (II) event7  - Sleep Button: is tagged by udev as: Keyboard

[     8.451] (II) event7  - Sleep Button: device is a keyboard

[     8.451] (II) event7  - Sleep Button: device removed

[     8.452] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input10/event7"

[     8.452] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)

[     8.452] (**) Option "xkb_model" "pc105"

[     8.452] (**) Option "xkb_layout" "fr"

[     8.452] (**) Option "xkb_variant" "latin9"

[     8.453] (II) event7  - Sleep Button: is tagged by udev as: Keyboard

[     8.453] (II) event7  - Sleep Button: device is a keyboard

[     8.453] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event13)

[     8.453] (II) No input driver specified, ignoring this device.

[     8.453] (II) This device may have been added with another device file.

[     8.453] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event14)

[     8.454] (II) No input driver specified, ignoring this device.

[     8.454] (II) This device may have been added with another device file.

[     8.454] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event15)

[     8.454] (II) No input driver specified, ignoring this device.

[     8.454] (II) This device may have been added with another device file.

[     8.454] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event16)

[     8.454] (II) No input driver specified, ignoring this device.

[     8.454] (II) This device may have been added with another device file.

[     8.454] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=10 (/dev/input/event17)

[     8.454] (II) No input driver specified, ignoring this device.

[     8.454] (II) This device may have been added with another device file.

[     8.455] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=11 (/dev/input/event18)

[     8.455] (II) No input driver specified, ignoring this device.

[     8.455] (II) This device may have been added with another device file.

[     8.455] (II) config/udev: Adding input device PixArt HP USB Optical Mouse (/dev/input/event5)

[     8.455] (**) PixArt HP USB Optical Mouse: Applying InputClass "libinput pointer catchall"

[     8.455] (II) Using input driver 'libinput' for 'PixArt HP USB Optical Mouse'

[     8.456] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 52 paused 0

[     8.456] (**) PixArt HP USB Optical Mouse: always reports core events

[     8.456] (**) Option "Device" "/dev/input/event5"

[     8.456] (**) Option "_source" "server/udev"

[     8.458] (II) event5  - PixArt HP USB Optical Mouse: is tagged by udev as: Mouse

[     8.458] (II) event5  - PixArt HP USB Optical Mouse: device is a pointer

[     8.458] (II) event5  - PixArt HP USB Optical Mouse: device removed

[     8.458] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:03F0:094A.0002/input/input8/event5"

[     8.458] (II) XINPUT: Adding extended input device "PixArt HP USB Optical Mouse" (type: MOUSE, id 11)

[     8.458] (**) Option "AccelerationScheme" "none"

[     8.458] (**) PixArt HP USB Optical Mouse: (accel) selected scheme none/0

[     8.458] (**) PixArt HP USB Optical Mouse: (accel) acceleration factor: 2.000

[     8.458] (**) PixArt HP USB Optical Mouse: (accel) acceleration threshold: 4

[     8.459] (II) event5  - PixArt HP USB Optical Mouse: is tagged by udev as: Mouse

[     8.460] (II) event5  - PixArt HP USB Optical Mouse: device is a pointer

[     8.460] (II) config/udev: Adding input device PixArt HP USB Optical Mouse (/dev/input/mouse2)

[     8.460] (II) No input driver specified, ignoring this device.

[     8.460] (II) This device may have been added with another device file.

[     8.461] (II) config/udev: Adding input device CUST0001:00 06CB:CDAA Mouse (/dev/input/event11)

[     8.461] (**) CUST0001:00 06CB:CDAA Mouse: Applying InputClass "libinput pointer catchall"

[     8.461] (II) Using input driver 'libinput' for 'CUST0001:00 06CB:CDAA Mouse'

[     8.461] (II) systemd-logind: got fd for /dev/input/event11 13:75 fd 53 paused 0

[     8.461] (**) CUST0001:00 06CB:CDAA Mouse: always reports core events

[     8.461] (**) Option "Device" "/dev/input/event11"

[     8.461] (**) Option "_source" "server/udev"

[     8.463] (II) event11 - CUST0001:00 06CB:CDAA Mouse: is tagged by udev as: Mouse Pointingstick

[     8.463] (II) event11 - CUST0001:00 06CB:CDAA Mouse: device is a pointer

[     8.464] (II) event11 - CUST0001:00 06CB:CDAA Mouse: device removed

[     8.464] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.2/i2c_designware.1/i2c-2/i2c-CUST0001:00/0018:06CB:CDAA.0001/input/input16/event11"

[     8.464] (II) XINPUT: Adding extended input device "CUST0001:00 06CB:CDAA Mouse" (type: MOUSE, id 12)

[     8.464] (**) Option "AccelerationScheme" "none"

[     8.464] (**) CUST0001:00 06CB:CDAA Mouse: (accel) selected scheme none/0

[     8.464] (**) CUST0001:00 06CB:CDAA Mouse: (accel) acceleration factor: 2.000

[     8.464] (**) CUST0001:00 06CB:CDAA Mouse: (accel) acceleration threshold: 4

[     8.465] (II) event11 - CUST0001:00 06CB:CDAA Mouse: is tagged by udev as: Mouse Pointingstick

[     8.465] (II) event11 - CUST0001:00 06CB:CDAA Mouse: device is a pointer

[     8.466] (II) config/udev: Adding input device CUST0001:00 06CB:CDAA Mouse (/dev/input/mouse0)

[     8.466] (II) No input driver specified, ignoring this device.

[     8.466] (II) This device may have been added with another device file.

[     8.467] (II) config/udev: Adding input device CUST0001:00 06CB:CDAA Touchpad (/dev/input/event12)

[     8.467] (**) CUST0001:00 06CB:CDAA Touchpad: Applying InputClass "libinput touchpad catchall"

[     8.467] (II) Using input driver 'libinput' for 'CUST0001:00 06CB:CDAA Touchpad'

[     8.467] (II) systemd-logind: got fd for /dev/input/event12 13:76 fd 54 paused 0

[     8.467] (**) CUST0001:00 06CB:CDAA Touchpad: always reports core events

[     8.467] (**) Option "Device" "/dev/input/event12"

[     8.467] (**) Option "_source" "server/udev"

[     8.469] (II) event12 - CUST0001:00 06CB:CDAA Touchpad: is tagged by udev as: Touchpad

[     8.471] (II) event12 - CUST0001:00 06CB:CDAA Touchpad: device is a touchpad

[     8.471] (II) event12 - CUST0001:00 06CB:CDAA Touchpad: device removed

[     8.471] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.2/i2c_designware.1/i2c-2/i2c-CUST0001:00/0018:06CB:CDAA.0001/input/input17/event12"

[     8.471] (II) XINPUT: Adding extended input device "CUST0001:00 06CB:CDAA Touchpad" (type: TOUCHPAD, id 13)

[     8.473] (**) Option "AccelerationScheme" "none"

[     8.473] (**) CUST0001:00 06CB:CDAA Touchpad: (accel) selected scheme none/0

[     8.473] (**) CUST0001:00 06CB:CDAA Touchpad: (accel) acceleration factor: 2.000

[     8.473] (**) CUST0001:00 06CB:CDAA Touchpad: (accel) acceleration threshold: 4

[     8.475] (II) event12 - CUST0001:00 06CB:CDAA Touchpad: is tagged by udev as: Touchpad

[     8.476] (II) event12 - CUST0001:00 06CB:CDAA Touchpad: device is a touchpad

[     8.477] (II) config/udev: Adding input device CUST0001:00 06CB:CDAA Touchpad (/dev/input/mouse1)

[     8.477] (II) No input driver specified, ignoring this device.

[     8.477] (II) This device may have been added with another device file.

[     8.477] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event19)

[     8.477] (II) No input driver specified, ignoring this device.

[     8.477] (II) This device may have been added with another device file.

[     8.478] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event20)

[     8.478] (II) No input driver specified, ignoring this device.

[     8.478] (II) This device may have been added with another device file.

[     8.478] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event21)

[     8.478] (II) No input driver specified, ignoring this device.

[     8.478] (II) This device may have been added with another device file.

[     8.478] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event22)

[     8.478] (II) No input driver specified, ignoring this device.

[     8.478] (II) This device may have been added with another device file.

[     8.479] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event23)

[     8.479] (II) No input driver specified, ignoring this device.

[     8.479] (II) This device may have been added with another device file.

[     8.479] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event24)

[     8.479] (II) No input driver specified, ignoring this device.

[     8.479] (II) This device may have been added with another device file.

[     8.479] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=10 (/dev/input/event25)

[     8.479] (II) No input driver specified, ignoring this device.

[     8.479] (II) This device may have been added with another device file.

[     8.480] (II) config/udev: Adding input device gpio-keys (/dev/input/event3)

[     8.480] (II) No input driver specified, ignoring this device.

[     8.480] (II) This device may have been added with another device file.

[     8.480] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)

[     8.480] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"

[     8.480] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'

[     8.481] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 55 paused 0

[     8.481] (**) AT Translated Set 2 keyboard: always reports core events

[     8.481] (**) Option "Device" "/dev/input/event0"

[     8.481] (**) Option "_source" "server/udev"

[     8.482] (II) event0  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard

[     8.482] (II) event0  - AT Translated Set 2 keyboard: device is a keyboard

[     8.482] (II) event0  - AT Translated Set 2 keyboard: device removed

[     8.482] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"

[     8.482] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)

[     8.482] (**) Option "xkb_model" "pc105"

[     8.482] (**) Option "xkb_layout" "fr"

[     8.482] (**) Option "xkb_variant" "latin9"

[     8.483] (II) event0  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard

[     8.483] (II) event0  - AT Translated Set 2 keyboard: device is a keyboard

[     8.484] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/event26)

[     8.484] (**) PS/2 Generic Mouse: Applying InputClass "libinput pointer catchall"

[     8.484] (II) Using input driver 'libinput' for 'PS/2 Generic Mouse'

[     8.485] (II) systemd-logind: got fd for /dev/input/event26 13:90 fd 56 paused 0

[     8.485] (**) PS/2 Generic Mouse: always reports core events

[     8.485] (**) Option "Device" "/dev/input/event26"

[     8.485] (**) Option "_source" "server/udev"

[     8.486] (II) event26 - PS/2 Generic Mouse: is tagged by udev as: Mouse

[     8.486] (II) event26 - PS/2 Generic Mouse: device is a pointer

[     8.486] (II) event26 - PS/2 Generic Mouse: device removed

[     8.486] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input2/event26"

[     8.486] (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE, id 15)

[     8.486] (**) Option "AccelerationScheme" "none"

[     8.486] (**) PS/2 Generic Mouse: (accel) selected scheme none/0

[     8.486] (**) PS/2 Generic Mouse: (accel) acceleration factor: 2.000

[     8.486] (**) PS/2 Generic Mouse: (accel) acceleration threshold: 4

[     8.487] (II) event26 - PS/2 Generic Mouse: is tagged by udev as: Mouse

[     8.487] (II) event26 - PS/2 Generic Mouse: device is a pointer

[     8.487] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/mouse3)

[     8.487] (II) No input driver specified, ignoring this device.

[     8.487] (II) This device may have been added with another device file.

[     8.488] (II) config/udev: Adding input device PC Speaker (/dev/input/event10)

[     8.488] (II) No input driver specified, ignoring this device.

[     8.488] (II) This device may have been added with another device file.

[     8.488] (II) config/udev: Adding input device MSI WMI hotkeys (/dev/input/event4)

[     8.488] (**) MSI WMI hotkeys: Applying InputClass "libinput keyboard catchall"

[     8.488] (II) Using input driver 'libinput' for 'MSI WMI hotkeys'

[     8.489] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 57 paused 0

[     8.489] (**) MSI WMI hotkeys: always reports core events

[     8.489] (**) Option "Device" "/dev/input/event4"

[     8.489] (**) Option "_source" "server/udev"

[     8.489] (II) event4  - MSI WMI hotkeys: is tagged by udev as: Keyboard

[     8.489] (II) event4  - MSI WMI hotkeys: device is a keyboard

[     8.490] (II) event4  - MSI WMI hotkeys: device removed

[     8.490] (**) Option "config_info" "udev:/sys/devices/virtual/input/input14/event4"

[     8.490] (II) XINPUT: Adding extended input device "MSI WMI hotkeys" (type: KEYBOARD, id 16)

[     8.490] (**) Option "xkb_model" "pc105"

[     8.490] (**) Option "xkb_layout" "fr"

[     8.490] (**) Option "xkb_variant" "latin9"

[     8.491] (II) event4  - MSI WMI hotkeys: is tagged by udev as: Keyboard

[     8.491] (II) event4  - MSI WMI hotkeys: device is a keyboard

[     8.545] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/mouse3)

[     8.545] (II) No input driver specified, ignoring this device.

[     8.545] (II) This device may have been added with another device file.

[     8.545] (II) config/udev: removing device PS/2 Generic Mouse

[     8.545] (**) Option "fd" "56"

[     8.545] (II) event26 - PS/2 Generic Mouse: device removed

[     8.545] (II) UnloadModule: "libinput"

[     8.545] (II) systemd-logind: releasing fd for 13:90

[     8.623] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/event26)

[     8.623] (**) PS/2 Generic Mouse: Applying InputClass "libinput pointer catchall"

[     8.623] (II) Using input driver 'libinput' for 'PS/2 Generic Mouse'

[     8.624] (II) systemd-logind: got fd for /dev/input/event26 13:90 fd 61 paused 0

[     8.624] (**) PS/2 Generic Mouse: always reports core events

[     8.624] (**) Option "Device" "/dev/input/event26"

[     8.624] (**) Option "_source" "server/udev"

[     8.627] (II) event26 - PS/2 Generic Mouse: is tagged by udev as: Mouse

[     8.627] (II) event26 - PS/2 Generic Mouse: device is a pointer

[     8.628] (II) event26 - PS/2 Generic Mouse: device removed

[     8.628] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input2/event26"

[     8.628] (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE, id 15)

[     8.629] (**) Option "AccelerationScheme" "none"

[     8.629] (**) PS/2 Generic Mouse: (accel) selected scheme none/0

[     8.629] (**) PS/2 Generic Mouse: (accel) acceleration factor: 2.000

[     8.629] (**) PS/2 Generic Mouse: (accel) acceleration threshold: 4

[     8.631] (II) event26 - PS/2 Generic Mouse: is tagged by udev as: Mouse

[     8.632] (II) event26 - PS/2 Generic Mouse: device is a pointer

[     8.937] (II) modeset(0): EDID vendor "SHP", prod id 5281

[     8.937] (II) modeset(0): Printing DDC gathered Modelines:

[     8.937] (II) modeset(0): Modeline "3840x2160"x0.0  533.28  3840 3888 3920 4000  2160 2163 2168 2222 -hsync -vsync (133.3 kHz eP)

[    15.259] (**) Option "fd" "45"

[    15.259] (II) event9  - Power Button: device removed

[    15.259] (**) Option "fd" "48"

[    15.259] (II) event1  - Video Bus: device removed

[    15.259] (**) Option "fd" "49"

[    15.259] (II) event2  - Video Bus: device removed

[    15.259] (**) Option "fd" "50"

[    15.259] (II) event8  - Power Button: device removed

[    15.260] (**) Option "fd" "51"

[    15.260] (II) event7  - Sleep Button: device removed

[    15.260] (**) Option "fd" "52"

[    15.260] (II) event5  - PixArt HP USB Optical Mouse: device removed

[    15.260] (**) Option "fd" "53"

[    15.260] (II) event11 - CUST0001:00 06CB:CDAA Mouse: device removed

[    15.260] (**) Option "fd" "54"

[    15.260] (II) event12 - CUST0001:00 06CB:CDAA Touchpad: device removed

[    15.260] (**) Option "fd" "55"

[    15.260] (II) event0  - AT Translated Set 2 keyboard: device removed

[    15.260] (**) Option "fd" "57"

[    15.260] (II) event4  - MSI WMI hotkeys: device removed

[    15.260] (**) Option "fd" "61"

[    15.260] (II) event26 - PS/2 Generic Mouse: device removed

[    15.260] (II) AIGLX: Suspending AIGLX clients for VT switch

[    15.293] (EE) modeset(0): failed to set mode: Permission denied

[    15.293] (II) systemd-logind: got pause for 13:69

[    15.293] (II) systemd-logind: got pause for 13:90

[    15.293] (II) systemd-logind: got pause for 13:64

[    15.293] (II) systemd-logind: got pause for 13:68

[    15.293] (II) systemd-logind: got pause for 13:71

[    15.293] (II) systemd-logind: got pause for 13:66

[    15.293] (II) systemd-logind: got pause for 13:72

[    15.293] (II) systemd-logind: got pause for 13:75

[    15.293] (II) systemd-logind: got pause for 13:65

[    15.293] (II) systemd-logind: got pause for 13:76

[    15.293] (II) systemd-logind: got pause for 13:73

[    15.293] (II) systemd-logind: got pause for 226:0

[    18.521] (II) UnloadModule: "libinput"

[    18.521] (II) systemd-logind: releasing fd for 13:90

[    18.563] (II) UnloadModule: "libinput"

[    18.563] (II) systemd-logind: releasing fd for 13:68

[    18.623] (II) UnloadModule: "libinput"

[    18.623] (II) systemd-logind: releasing fd for 13:64

[    18.679] (II) UnloadModule: "libinput"

[    18.679] (II) systemd-logind: releasing fd for 13:76

[    18.735] (II) UnloadModule: "libinput"

[    18.735] (II) systemd-logind: releasing fd for 13:75

[    18.759] (II) UnloadModule: "libinput"

[    18.759] (II) systemd-logind: releasing fd for 13:69

[    18.795] (II) UnloadModule: "libinput"

[    18.795] (II) systemd-logind: releasing fd for 13:71

[    18.831] (II) UnloadModule: "libinput"

[    18.831] (II) systemd-logind: releasing fd for 13:72

[    18.878] (II) UnloadModule: "libinput"

[    18.878] (II) systemd-logind: releasing fd for 13:66

[    18.918] (II) UnloadModule: "libinput"

[    18.918] (II) systemd-logind: releasing fd for 13:65

[    18.951] (II) UnloadModule: "libinput"

[    18.951] (II) systemd-logind: releasing fd for 13:73

[    19.005] (WW) NVIDIA(G0): Failed to set the display configuration

[    19.005] (WW) NVIDIA(G0):  - Setting a mode on head 0 failed: Insufficient permissions

[    19.005] (WW) NVIDIA(G0):  - Setting a mode on head 1 failed: Insufficient permissions

[    19.005] (WW) NVIDIA(G0):  - Setting a mode on head 2 failed: Insufficient permissions

[    19.006] (WW) NVIDIA(G0):  - Setting a mode on head 3 failed: Insufficient permissions

[    19.011] (II) NVIDIA(GPU-0): Deleting GPU-0

[    19.013] (II) Server terminated successfully (0). Closing log file.

Et le retour de dmesg | grep -i drm

root@MSI-RR:~# dmesg | grep -i drm

[    1.931161] i915 0000:00:02.0: [drm] VT-d active for gfx access

[    1.931164] fb0: switching to inteldrmfb from EFI VGA

[    1.933151] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)

[    1.939017] i915 0000:00:02.0: [drm] Panel advertises DPCD backlight support, but VBT disagrees. If your backlight controls don't work try booting with i915.enable_dpcd_backlight=1. If your machine needs this, please file a _new_ bug report on drm/i915, see https://gitlab.freedesktop.org/drm/intel/-/wikis/How-to-file-i915-bugs for details.

[    1.946352] [drm] Initialized i915 1.6.0 20200917 for 0000:00:02.0 on minor 0

[    1.954173] fbcon: i915drmfb (fb0) is primary device

[    3.108107] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device

[    4.621373] systemd[1]: Starting Load Kernel Module drm...

[    4.625488] systemd[1]: modprobe@drm.service: Succeeded.

[    4.625577] systemd[1]: Finished Load Kernel Module drm.

[    4.743854] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver

[    4.743856] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 1

Encore merci !!!

Dernière modification par Dji-pi-dji (09-10-2021 19:37:13)

Tawal · 09-10-2021 19:17:08

Hello,

Utilises les balises du forum pour poster correctement ce genre de message.
Sélectionne tout ton Xorg.log et clique sur "Autre code", ça va poser les balises [ code ] et [ / code ] autour et ce sera bien plus lisible pour tout le monde

anonyme · 09-10-2021 20:50:11

re,
actuellement tu est sur l'écran du portable

[     8.377] (II) modeset(0): Setting screen physical size to 1016 x 571

 

tu utilise le driver du noyau "modeset" pour ton gpu intel
et tout paraît correct
maintenant il te faut un switch entre intel et nvidia
et trouver une astuce pour utiliser les deux écrans sur intel ou nvidia
tu peu remettre le retour des erreurs
ps: pénible ces portables

nota: un petit souci ici

[    1.939017] i915 0000:00:02.0: [drm] Panel advertises DPCD backlight support, 

but VBT disagrees. If your backlight controls don't work try booting with i915.enable_dpcd_backlight=1. 

If your machine needs this, please file a _new_ bug report on drm/i915, 

see https://gitlab.freedesktop.org/drm/intel/-/wikis/How-to-file-i915-bugs for details.

remarque: idem pour le driver nvidia il fonctionne parfaitement

ici je comprend pas

[     6.376] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/X11/cyrillic".

 

essaie de faire un

apt --reinstall install xfonts-cyrillic

 

ps: tu peu vérifier si le dossier existe avec l'explorateur => /usr/share/fonts/X11/cyrillic
je vais regarder pour les écrans , les sorties

Dernière modification par anonyme (09-10-2021 21:05:05)

anonyme · 09-10-2021 21:07:59

déjà tu peu faire ces commandes (du paquet "mesa-utils" a installer )
a faire en user

glxinfo-B

 

et

xrandr

 

alors pour l igpu intel
sortie interne "eDP-1"

[     7.979] (II) modeset(0): Creating default Display subsection in Screen section

  "Default Screen Section" for depth/fbbpp 24/32

  [     8.159] (II) modeset(0): Output eDP-1 has no monitor section

[     8.160] (II) modeset(0): EDID for output eDP-1

[     8.160] (II) modeset(0): Manufacturer: SHP  Model: 14a1  Serial#: 0

[     8.160] (II) modeset(0): Year: 2018  Week: 22

[     8.160] (II) modeset(0): EDID Version: 1.4

[     8.160] (II) modeset(0): Digital Display Input

[     8.160] (II) modeset(0): 8 bits per channel

[     8.160] (II) modeset(0): Digital interface is DisplayPort

[     8.162] (II) modeset(0): Output eDP-1 using initial mode 3840x2160 +0+0

pour nvidia un écran virtuel , il ne détecte rien

[     8.205] (II) NVIDIA(G0): NVIDIA GPU GeForce RTX 2060 (TU106-A) at PCI:1:0:0 (GPU-0)

[     8.205] (--) NVIDIA(G0): Memory: 6291456 kBytes

[     8.205] (--) NVIDIA(G0): VideoBIOS: 90.06.59.00.77

[     8.205] (II) NVIDIA(G0): Detected PCI Express Link width: 16X

[     8.205] (--) NVIDIA(GPU-0): DFP-0: disconnected

[     8.205] (--) NVIDIA(GPU-0): DFP-0: Internal DisplayPort

[     8.205] (--) NVIDIA(GPU-0): DFP-0: 2660.0 MHz maximum pixel clock

[     8.205] (--) NVIDIA(GPU-0):

[     8.205] (--) NVIDIA(GPU-0): DFP-1: disconnected

[     8.205] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS

[     8.205] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock

[     8.205] (--) NVIDIA(GPU-0):

[     8.205] (--) NVIDIA(GPU-0): DFP-2: disconnected

[     8.205] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort

[     8.205] (--) NVIDIA(GPU-0): DFP-2: 2660.0 MHz maximum pixel clock

[     8.205] (--) NVIDIA(GPU-0):

[     8.205] (--) NVIDIA(GPU-0): DFP-3: disconnected

[     8.205] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS

[     8.205] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock

[     8.205] (--) NVIDIA(GPU-0):

[     8.205] (--) NVIDIA(GPU-0): DFP-4: disconnected

[     8.205] (--) NVIDIA(GPU-0): DFP-4: Internal TMDS

[     8.205] (--) NVIDIA(GPU-0): DFP-4: 165.0 MHz maximum pixel clock

[     8.205] (--) NVIDIA(GPU-0):

[     8.205] (--) NVIDIA(GPU-0): DFP-5: disconnected

[     8.205] (--) NVIDIA(GPU-0): DFP-5: Internal DisplayPort

[     8.205] (--) NVIDIA(GPU-0): DFP-5: 2660.0 MHz maximum pixel clock

[     8.205] (--) NVIDIA(GPU-0):

[     8.206] (II) NVIDIA(G0): Validated MetaModes:

[     8.206] (II) NVIDIA(G0):     "NULL"

[     8.206] (II) NVIDIA(G0): Virtual screen size determined to be 640 x 480

je sais pas si tu a fait les commandes avec les deux écrans branchés et allumés ? (donc portable et écran externe )
tu vois que de DFP-0 a DFP-5 rien de connecté

Dernière modification par anonyme (09-10-2021 21:21:16)

Dji-pi-dji · 09-10-2021 21:09:33

Re,

Oui entre temps je suis repassé sur l écran du portable pour continuer de chercher une configuration du xorg.conf, mais je suis de nouveau sur le HDMI
Par contre, la résolution que j utilise est en 3840x2160 donc je ne comprends pas d ou sort cette valeur ? ...

dmesg | grep -i drm

    1.899526] i915 0000:00:02.0: [drm] VT-d active for gfx access

[    1.899529] fb0: switching to inteldrmfb from EFI VGA

[    1.901595] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)

[    1.907662] i915 0000:00:02.0: [drm] Panel advertises DPCD backlight support, but VBT disagrees. If your backlight controls don't work try booting with i915.enable_dpcd_backlight=1. If your machine needs this, please file a _new_ bug report on drm/i915, see https://gitlab.freedesktop.org/drm/intel/-/wikis/How-to-file-i915-bugs for details.

[    1.910015] [drm] Initialized i915 1.6.0 20200917 for 0000:00:02.0 on minor 0

[    1.917724] fbcon: i915drmfb (fb0) is primary device

[    3.054307] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device

[    4.598743] systemd[1]: Starting Load Kernel Module drm...

[    4.603448] systemd[1]: modprobe@drm.service: Succeeded.

[    4.603530] systemd[1]: Finished Load Kernel Module drm.

[    4.719432] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver

[    4.719434] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 1

glxinfo-B

bash: glxinfo-B : commande introuvable

root@MSI-RR:~# glxinfo -B

name of display: :1

display: :1  screen: 0

direct rendering: Yes

Memory info (GL_NVX_gpu_memory_info):

    Dedicated video memory: 6144 MB

    Total available memory: 6144 MB

    Currently available dedicated video memory: 5548 MB

OpenGL vendor string: NVIDIA Corporation

OpenGL renderer string: GeForce RTX 2060/PCIe/SSE2

OpenGL core profile version string: 4.6.0 NVIDIA 460.91.03

OpenGL core profile shading language version string: 4.60 NVIDIA

OpenGL core profile context flags: (none)

OpenGL core profile profile mask: core profile

OpenGL version string: 4.6.0 NVIDIA 460.91.03

OpenGL shading language version string: 4.60 NVIDIA

OpenGL context flags: (none)

OpenGL profile mask: (none)

OpenGL ES profile version string: OpenGL ES 3.2 NVIDIA 460.91.03

OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.20

xrandr

Screen 0: minimum 8 x 8, current 2560 x 1440, maximum 32767 x 32767

DP-0 disconnected (normal left inverted right x axis y axis)

DP-1 disconnected (normal left inverted right x axis y axis)

DP-2 disconnected (normal left inverted right x axis y axis)

DP-3 disconnected (normal left inverted right x axis y axis)

HDMI-0 connected primary 2560x1440+0+0 (normal left inverted right x axis y axis) 597mm x 336mm

   2560x1440     59.95*+

   1920x1080     60.00    59.94    50.00  

   1680x1050     59.95  

   1440x900      59.89  

   1440x576      50.00  

   1440x480      59.94  

   1280x1024     75.02    60.02  

   1280x960      60.00  

   1280x720      60.00    59.94    50.00  

   1152x864      75.00  

   1024x768      75.03    70.07    60.00  

   800x600       75.00    72.19    60.32    56.25  

   720x576       50.00  

   720x480       59.94  

   640x480       75.00    72.81    59.94    59.93  

DP-4 disconnected (normal left inverted right x axis y axis)

Pour le dossier cyrillic c est OK, oui il n était pas présent

Est-ce que tu souhaite que je te renvoie les commandes en étant sur Intel ?
Ça pourrait être intéressant ?

Merci pour ton aide !

Dernière modification par Dji-pi-dji (09-10-2021 21:19:23)

anonyme · 09-10-2021 21:33:29

on va essayer d'utiliser ceci ( ça risque de pas résoudre les deux écrans mais te permettra de switcher d un gpu a l'autre )

For systems that have both an integrated GPU and a dedicated GPU, this

package by default will force the integrated GPU to be used to save power.

You can launch individual apps using the dedicated GPU by running them

with the environment variable DRI_PRIME=1. Or you can right-click on the

app (while it's not running) in GNOME Shell's Activities Overview

and choose the "Launch using Dedicated Graphics Card" option.

If this default behavior is not appropriate, uninstall this package or

set xdg.force_integrated=0 as a kernel command-line option in your

bootloader.

donc DRI_PRIME=1 pour nvidia
par defaut il force DRI_PRIME=0 pour intel

apt install switcheroo-control

 

anonyme · 09-10-2021 21:38:58

pour l'instant on se concentre sur intel et écran HDMI branché et allumé
je veut pas entendre parler de xorg.conf , tu les efface ou tu les déplace dans tes documents (avec un mv par exemple en root)
avec xrandr tu a la définition native et le nom de l'écran (je sais pas lequel est correct xrandr ou le log de X )
pour nvidia on voit HDMI-0
et display: :1 , pour le nom (display1)
pour intel ou nvidia ,l'écran interne display0 , l'écran externe display1
quand tu aura installé le switch il faudra le tester soit avec xrandr soit avec glxinfo -B

Dernière modification par anonyme (09-10-2021 21:45:48)

anonyme · 09-10-2021 21:47:56

Est-ce que tu souhaite que je te renvoie les commandes en étant sur Intel ?

 

oui si tu installe le paquet tu sera sur intel par défaut (voir le #10)
ps: il faudra redémarrer la machine

Dernière modification par anonyme (09-10-2021 21:50:01)

Dji-pi-dji · 09-10-2021 21:49:17

C'est good le paquet était déjà installé, par contre

Question bête ...

La modif je la fais ou ? (désolé ...)

anonyme · 09-10-2021 21:52:05

ok teste les commandes DRI_PRIME=1 ou 0 (en user)
quelle modif ?

a l'installation il a détecter que tu a deux gpu , pas pensé

Dernière modification par anonyme (09-10-2021 21:53:15)

Dji-pi-dji · 09-10-2021 21:55:31

De retour sur Intel, sans la conf X

Le retour des commandes :

dmesg | grep -i drm

[    1.944290] i915 0000:00:02.0: [drm] VT-d active for gfx access

[    1.944295] fb0: switching to inteldrmfb from EFI VGA

[    1.947558] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)

[    1.953562] i915 0000:00:02.0: [drm] Panel advertises DPCD backlight support, but VBT disagrees. If your backlight controls don't work try booting with i915.enable_dpcd_backlight=1. If your machine needs this, please file a _new_ bug report on drm/i915, see https://gitlab.freedesktop.org/drm/intel/-/wikis/How-to-file-i915-bugs for details.

[    1.974114] [drm] Initialized i915 1.6.0 20200917 for 0000:00:02.0 on minor 0

[    1.984583] fbcon: i915drmfb (fb0) is primary device

[    3.149092] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device

[    4.714511] systemd[1]: Starting Load Kernel Module drm...

[    4.721614] systemd[1]: modprobe@drm.service: Succeeded.

[    4.721764] systemd[1]: Finished Load Kernel Module drm.

[    4.865556] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver

[    4.865558] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 1

glxinfo -B

name of display: :1

display: :1  screen: 0

direct rendering: Yes

Extended renderer info (GLX_MESA_query_renderer):

    Vendor: Intel (0x8086)

    Device: Mesa Intel(R) UHD Graphics (CML GT2) (0x9bc4)

    Version: 20.3.5

    Accelerated: yes

    Video memory: 3072MB

    Unified memory: yes

    Preferred profile: core (0x1)

    Max core profile version: 4.6

    Max compat profile version: 4.6

    Max GLES1 profile version: 1.1

    Max GLES[23] profile version: 3.2

OpenGL vendor string: Intel

OpenGL renderer string: Mesa Intel(R) UHD Graphics (CML GT2)

OpenGL core profile version string: 4.6 (Core Profile) Mesa 20.3.5

OpenGL core profile shading language version string: 4.60

OpenGL core profile context flags: (none)

OpenGL core profile profile mask: core profile

OpenGL version string: 4.6 (Compatibility Profile) Mesa 20.3.5

OpenGL shading language version string: 4.60

OpenGL context flags: (none)

OpenGL profile mask: compatibility profile

OpenGL ES profile version string: OpenGL ES 3.2 Mesa 20.3.5

OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.20

xrandr

Screen 0: minimum 320 x 200, current 3840 x 2160, maximum 16384 x 16384

eDP-1 connected primary 3840x2160+0+0 (normal left inverted right x axis y axis) 344mm x 194mm

   3840x2160     60.00*+  59.98    59.97  

   3200x1800     59.96    59.94  

   2880x1620     59.96    59.97  

   2560x1600     59.99    59.97  

   2560x1440     59.99    59.99    59.96    59.95  

   2048x1536     60.00  

   1920x1440     60.00  

   1856x1392     60.01  

   1792x1344     60.01  

   2048x1152     59.99    59.98    59.90    59.91  

   1920x1200     59.88    59.95  

   1920x1080     60.01    59.97    59.96    59.93  

   1600x1200     60.00  

   1680x1050     59.95    59.88  

   1600x1024     60.17  

   1400x1050     59.98  

   1600x900      59.99    59.94    59.95    59.82  

   1280x1024     60.02  

   1440x900      59.89  

   1400x900      59.96    59.88  

   1280x960      60.00  

   1440x810      60.00    59.97  

   1368x768      59.88    59.85  

   1360x768      59.80    59.96  

   1280x800      59.99    59.97    59.81    59.91  

   1152x864      60.00  

   1280x720      60.00    59.99    59.86    59.74  

   1024x768      60.04    60.00  

   960x720       60.00  

   928x696       60.05  

   896x672       60.01  

   1024x576      59.95    59.96    59.90    59.82  

   960x600       59.93    60.00  

   960x540       59.96    59.99    59.63    59.82  

   800x600       60.00    60.32    56.25  

   840x525       60.01    59.88  

   864x486       59.92    59.57  

   800x512       60.17  

   700x525       59.98  

   800x450       59.95    59.82  

   640x512       60.02  

   720x450       59.89  

   700x450       59.96    59.88  

   640x480       60.00    59.94  

   720x405       59.51    58.99  

   684x384       59.88    59.85  

   680x384       59.80    59.96  

   640x400       59.88    59.98  

   576x432       60.06  

   640x360       59.86    59.83    59.84    59.32  

   512x384       60.00  

   512x288       60.00    59.92  

   480x270       59.63    59.82  

   400x300       60.32    56.34  

   432x243       59.92    59.57  

   320x240       60.05  

   360x202       59.51    59.13  

   320x180       59.84    59.32

anonyme · 09-10-2021 21:59:40

la traduction

Pour les systèmes qui ont à la fois un GPU intégré et un GPU dédié, ce

package par défaut forcera l'utilisation du GPU intégré pour économiser de l'énergie.

Vous pouvez lancer des applications individuelles à l'aide du GPU dédié en les exécutant

avec la variable d'environnement DRI_PRIME=1. Ou vous pouvez faire un clic droit sur le

app (lorsqu'elle n'est pas en cours d'exécution) dans la vue d'ensemble des activités de GNOME Shell

et choisissez l'option "Lancer à l'aide d'une carte graphique dédiée".

Si ce comportement par défaut n'est pas approprié, désinstallez ce package ou

définissez xdg.force_integrated=0 comme option de ligne de commande du noyau dans votre

chargeur de démarrage.

anonyme · 09-10-2021 22:01:22

si tu fais un DRI-PRIME=1 xrandr par exemple

ps: tu est en 4K sur l'écran interne ?

Dernière modification par anonyme (09-10-2021 22:02:16)

Dji-pi-dji · 09-10-2021 22:02:14

Oui c est ok ca fonctionne, il y a bien l'option en faisant clic droit

Non, ce st juste du HD

Dernière modification par Dji-pi-dji (09-10-2021 22:04:05)

anonyme · 09-10-2021 22:03:39

pour les écrans ça donne quoi ?

ps: le #16 est important pour toi (il y a une option dans le noyau aussi)
la machine est propre reste plus que ce souci du double écran

Dernière modification par anonyme (09-10-2021 22:10:28)

Dji-pi-dji · 09-10-2021 22:07:23

Pour les écrans ça ne change rien, j ai bien les appli qui se lancent avec les commandes mais c est tout

anonyme · 09-10-2021 22:12:31

c'est null ce truc , tu n'a qu une sortie d'écran physique sur le portable ?

avec 1 tu est sur l'externe , avec 0 tu est sur l'interne ?

je vais te laisser pas encore manger , on en reparlera

Dernière modification par anonyme (09-10-2021 22:21:42)

Dji-pi-dji · 09-10-2021 22:15:51

Oui je n ai qu une sortie ... ne m en parle pas

Autre chose, du fait d avoir retiré la conf x, lorsque je saisie les commandes DRI_PRIME=0 ou 1 il ne bascule pas sur la carte nvidia (je faisais un watch sur le nvidia-smi en // et il ne bougeait pas

)

anonyme · 09-10-2021 22:20:25

si physiquement les sorties sont attacher a un gpu je vois pas trop comment changer le comportement
quand tout est propre il faut redémarrer la machine pour le swith fonctionne peut être (sans xorg.conf)

je te laisse bonne fin de soirée , vais manger

Dernière modification par anonyme (09-10-2021 22:22:54)

Dji-pi-dji · 09-10-2021 22:24:54

Même après le reboot en 0 ou 1 idem ...

Bon app' et encore merci pour ton aide !

anonyme · 10-10-2021 12:09:46

Bonjour
si tu veut avoir la carte nvidia en permanence tu peut modifier la ligne ci dessous

nano /etc/default/grub

 

tu ajoute ceci "xdg.force_integrated=1"
ce qui donne

# If you change this file, run 'update-grub' afterwards to update

# /boot/grub/grub.cfg.

# For full documentation of the options in this file, see:

#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0

GRUB_TIMEOUT=5

GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`

GRUB_CMDLINE_LINUX_DEFAULT="xdg.force_integrated=1 quiet"

GRUB_CMDLINE_LINUX=""

tu enregistre
puis un update-grub et reboot

update-grub

 

et tu vois si correct
ps:la démarche pour le retirer c'est l'inverse (enlever l'option et update-grub)
nota: pour nvidia tu a un utilitaire graphique (du paquet nvidia-settings" ) pour créer en autre un xorg.conf dans /etc/X11/xorg.conf

Debian-facile

#1 08-10-2021 21:05:18

Debian Bullseye Laptop Graphique Intel/NVidia Configuration Xorg.conf

#2 08-10-2021 22:40:35

Re : Debian Bullseye Laptop Graphique Intel/NVidia Configuration Xorg.conf

#3 09-10-2021 00:03:46

Re : Debian Bullseye Laptop Graphique Intel/NVidia Configuration Xorg.conf

#4 09-10-2021 18:23:52

Re : Debian Bullseye Laptop Graphique Intel/NVidia Configuration Xorg.conf

#5 09-10-2021 18:54:15

Re : Debian Bullseye Laptop Graphique Intel/NVidia Configuration Xorg.conf

#6 09-10-2021 19:17:08

Re : Debian Bullseye Laptop Graphique Intel/NVidia Configuration Xorg.conf

#7 09-10-2021 20:50:11

Re : Debian Bullseye Laptop Graphique Intel/NVidia Configuration Xorg.conf

#8 09-10-2021 21:07:59

Re : Debian Bullseye Laptop Graphique Intel/NVidia Configuration Xorg.conf

#9 09-10-2021 21:09:33

Re : Debian Bullseye Laptop Graphique Intel/NVidia Configuration Xorg.conf

#10 09-10-2021 21:33:29

Re : Debian Bullseye Laptop Graphique Intel/NVidia Configuration Xorg.conf

#11 09-10-2021 21:38:58

Re : Debian Bullseye Laptop Graphique Intel/NVidia Configuration Xorg.conf

#12 09-10-2021 21:47:56

Re : Debian Bullseye Laptop Graphique Intel/NVidia Configuration Xorg.conf

#13 09-10-2021 21:49:17

Re : Debian Bullseye Laptop Graphique Intel/NVidia Configuration Xorg.conf

#14 09-10-2021 21:52:05

Re : Debian Bullseye Laptop Graphique Intel/NVidia Configuration Xorg.conf

#15 09-10-2021 21:55:31

Re : Debian Bullseye Laptop Graphique Intel/NVidia Configuration Xorg.conf

#16 09-10-2021 21:59:40

Re : Debian Bullseye Laptop Graphique Intel/NVidia Configuration Xorg.conf

#17 09-10-2021 22:01:22

Re : Debian Bullseye Laptop Graphique Intel/NVidia Configuration Xorg.conf

#18 09-10-2021 22:02:14

Re : Debian Bullseye Laptop Graphique Intel/NVidia Configuration Xorg.conf

#19 09-10-2021 22:03:39

Re : Debian Bullseye Laptop Graphique Intel/NVidia Configuration Xorg.conf

#20 09-10-2021 22:07:23

Re : Debian Bullseye Laptop Graphique Intel/NVidia Configuration Xorg.conf

#21 09-10-2021 22:12:31

Re : Debian Bullseye Laptop Graphique Intel/NVidia Configuration Xorg.conf

#22 09-10-2021 22:15:51

Re : Debian Bullseye Laptop Graphique Intel/NVidia Configuration Xorg.conf

#23 09-10-2021 22:20:25

Re : Debian Bullseye Laptop Graphique Intel/NVidia Configuration Xorg.conf

#24 09-10-2021 22:24:54

Re : Debian Bullseye Laptop Graphique Intel/NVidia Configuration Xorg.conf

#25 10-10-2021 12:09:46

Re : Debian Bullseye Laptop Graphique Intel/NVidia Configuration Xorg.conf

Pied de page des forums