Debian Debian-France Debian-Facile Debian-fr.org Forum-Debian.fr Debian ? Communautés

Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#1 29-11-2021 14:58:23

TyZef
Membre
Distrib. : dn sid
(G)UI : OpenBox
Inscription : 09-05-2013

HDA Intel PCH HDMI/DP

salut vous le peuple !!!

lorsque je démarre mon ordi portatif, j'ai le droit à ce jolie message d'erreur lors du démarrage :

[    4.781490] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC255: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    4.781560] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    4.781623] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    4.781668] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    4.781700] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    4.781743] snd_hda_codec_realtek hdaudioC0D0:      Headset Mic=0x19
[    4.781782] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[    4.873065] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[    4.873308] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
[    4.873488] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
[    4.873739] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
[    4.873947] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
[    4.874178] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21
[    4.874430] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input22
[    4.874821] input: HDA Intel PCH HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input23
[    4.876883] input: HDA Intel PCH HDMI/DP,pcm=12 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input24



puis le démarrage reste figé...

je dois appuyer sur extinction pour redémarrer...

j'ai recherché un peu en anglais, sans succès...

Dernière modification par TyZef (13-01-2022 08:46:50)


......###     #       #    #        #
..#            # #    #    #        #
.#   ###   #    # #    #        #
....###    #       #       ###   Linux

Hors ligne

#2 29-11-2021 16:06:29

raleur
Membre
Inscription : 03-10-2014

Re : HDA Intel PCH HDMI/DP

Ça ne ressemble pas à un message d'erreur.
C'est différent au redémarrage ?
Ça marchait avant (avant quoi) ?

Il vaut mieux montrer que raconter.

Hors ligne

#3 29-11-2021 16:50:49

TyZef
Membre
Distrib. : dn sid
(G)UI : OpenBox
Inscription : 09-05-2013

Re : HDA Intel PCH HDMI/DP

Merci raleur,

C'est à dire que ça arrive une fois de temps en temps...

Je démarre mon ordi portable, je passe le grub mais avant d'arriver à LightDM, le chargement stop message ci dessus, puis rien ne se passe... je ne peux que redémarrer...

Puis ça redémarre normalement

Dernière modification par TyZef (29-11-2021 16:51:31)


......###     #       #    #        #
..#            # #    #    #        #
.#   ###   #    # #    #        #
....###    #       #       ###   Linux

Hors ligne

#4 29-11-2021 20:13:47

raleur
Membre
Inscription : 03-10-2014

Re : HDA Intel PCH HDMI/DP

J'ai des messages similaires dans les logs du noyau sur une machine, ils sont de niveau "info" donc normaux (pas warning ni erreur). Ils ne devraient même pas être affichés, à moins que tu aies modifié les paramètres du noyau (voir dans /proc/cmdline) et dans ce cas ils devraient être affichés à chaque démarrage, pas seulement lors des blocages. En temps normal ils sont peut-être masqués par le lancement de l'interface graphique, ou bien ils passent trop vite pour que tu les voies.

As-tu essayer de redémarrer proprement avec Ctrl+Alt+Suppr ou avec les touches "magiques" Alt+ImpEc+r e i s u b ?

Il vaut mieux montrer que raconter.

Hors ligne

#5 29-11-2021 20:36:38

TyZef
Membre
Distrib. : dn sid
(G)UI : OpenBox
Inscription : 09-05-2013

Re : HDA Intel PCH HDMI/DP

Après, si ce n'est pas un bug, ça m'empêche quand même d'accéder au Login... et ça me force à redémarrer... enfin j'arrive quand même à basculer en TTY, voir même lancer Startx... mais bon c'est pas le but...

......###     #       #    #        #
..#            # #    #    #        #
.#   ###   #    # #    #        #
....###    #       #       ###   Linux

Hors ligne

#6 29-11-2021 20:40:43

TyZef
Membre
Distrib. : dn sid
(G)UI : OpenBox
Inscription : 09-05-2013

Re : HDA Intel PCH HDMI/DP

raleur a écrit :

à moins que tu aies modifié les paramètres du noyau (voir dans /proc/cmdline)


C'est la nakeDeb d'Arpinux ! Je sais pas si il a fait des choses de ce côté là

Merci pour ton attention raleur !


......###     #       #    #        #
..#            # #    #    #        #
.#   ###   #    # #    #        #
....###    #       #       ###   Linux

Hors ligne

#7 29-11-2021 20:59:12

raleur
Membre
Inscription : 03-10-2014

Re : HDA Intel PCH HDMI/DP

TyZef a écrit :

Après, si ce n'est pas un bug, ça m'empêche quand même d'accéder au Login... et ça me force à redémarrer... enfin j'arrive quand même à basculer en TTY, voir même lancer Startx


Je ne dis pas qu'il n'y a pas un bug, mais qu'il n'est pas lié aux messages affichés qui concernent le pilote audio.
Si tu peux basculer dans une console tty avec Ctrl+Alt+F<n>, le système n'est pas du tout bloqué. Je pense que c'est seulement le gestionnaire de connexion graphique qui se lance mal. As-tu parcouru toutes les consoles au moins de 1 à 8 pour voir s'il n'était pas dans l'une d'elles ? As-tu essayé de redémarrer le service correspondant ? As-tu regardé les logs (du système, de Xorg...) ?

TyZef a écrit :

C'est la nakeDeb d'Arpinux


Je ne connais pas. Ce serait plus clair si tu montrais le contenu de /proc/cmdline.
C'est basé sur systemd ou sysvinit ?

Dernière modification par raleur (29-11-2021 21:00:18)


Il vaut mieux montrer que raconter.

Hors ligne

#8 29-11-2021 21:12:54

robert2a
Membre
Distrib. : Buster 10 version 10.11
Noyau : kernel buster backports
(G)UI : Mate
Inscription : 15-11-2014

Re : HDA Intel PCH HDMI/DP

Bonsoir
des informations sur le matériel , cpu , chipset
matériel récent ?
un "lspci" et les erreurs quand ça démarre


journalctl -b -r -p err
 


tu a des firmwares nonfree  pour l'audio intel  selon la génération du matériel


Machines : kabylake I7 7700 , AMD 1700(X) ,AMD threadripper gen1 , AMD Raven R3 2200G , AMD FX(tm)-8320

Hors ligne

#9 24-12-2021 12:33:32

TyZef
Membre
Distrib. : dn sid
(G)UI : OpenBox
Inscription : 09-05-2013

Re : HDA Intel PCH HDMI/DP

Salut raleur et robert2a,

merci beaucoup pour vôtre attention \o/ !

lisez, cela fait à présent un bon moment maintenant que j'attend ce bug pour vous renvoyer le contenu de /proc/cmdline. ainsi que : journalctl -b -r -p err

mais voilà que ça ne bug plus..... bon tant mieux... mais j'aurais quand aimé en savoir plus avec vous !

donc je propose ce topic en stand-by.

merci encore pour vôtre attention.

......###     #       #    #        #
..#            # #    #    #        #
.#   ###   #    # #    #        #
....###    #       #       ###   Linux

Hors ligne

#10 13-01-2022 08:46:02

TyZef
Membre
Distrib. : dn sid
(G)UI : OpenBox
Inscription : 09-05-2013

Re : HDA Intel PCH HDMI/DP

Plop ici !

Je le tiens !!!

raleur :

As-tu essayer de redémarrer proprement avec As-tu essayer de redémarrer proprement avec Ctrl+Alt+Suppr ou avec les touches "magiques" Alt+ImpEc+r e i s u b ?



Ici j'ai fais un Ctrl+Alt+F2, Login puis un StartX et me voila à vous parler...

raleur

As-tu parcouru toutes les consoles au moins de 1 à 8 pour voir s'il n'était pas dans l'une d'elles ? As-tu essayé de redémarrer le service correspondant ? As-tu regardé les logs (du système, de Xorg...) ?



dmesg

 $ sudo dmesg
[sudo] Mot de passe de tzf :
[    0.000000] microcode: microcode updated early to revision 0xa6, date = 2020-11-01
[    0.000000] Linux version 5.10.0-10-amd64 (debian-kernel@lists.debian.org) (gcc-10 (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Debian 5.10.84-1 (2021-12-08)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.10.0-10-amd64 root=UUID=3689a581-4108-4bf8-975b-dc3bd58ede22 ro
[    0.000000] x86/split lock detection: warning about user-space split_locks
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[5]:  832, xstate_sizes[5]:   64
[    0.000000] x86/fpu: xstate_offset[6]:  896, xstate_sizes[6]:  512
[    0.000000] x86/fpu: xstate_offset[7]: 1408, xstate_sizes[7]: 1024
[    0.000000] x86/fpu: xstate_offset[9]: 2432, xstate_sizes[9]:    8
[    0.000000] x86/fpu: Enabled xstate features 0x2e7, context size is 2440 bytes, using 'compacted' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000040767fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040768000-0x0000000041067fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000041068000-0x0000000042e7efff] usable
[    0.000000] BIOS-e820: [mem 0x0000000042e7f000-0x000000004324efff] type 20
[    0.000000] BIOS-e820: [mem 0x000000004324f000-0x00000000442befff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000442bf000-0x0000000044bcefff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000044bcf000-0x0000000044c4efff] ACPI data
[    0.000000] BIOS-e820: [mem 0x0000000044c4f000-0x0000000044c4ffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000044c50000-0x0000000048ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000049e00000-0x00000000cfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fc800000-0x00000000fe7fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed17fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feda0000-0x00000000feda1fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff600000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000002b07fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.70 by INSYDE Corp.
[    0.000000] efi: ACPI=0x44c4e000 ACPI 2.0=0x44c4e014 TPMFinalLog=0x44b81000 ESRT=0x432b4698 SMBIOS=0x432b1000 SMBIOS 3.0=0x432af000
[    0.000000] secureboot: Secure boot could not be determined (mode 0)
[    0.000000] SMBIOS 3.2.0 present.
[    0.000000] DMI: Acer Aspire A315-56/Sleepy_IL, BIOS V1.17 09/25/2020
[    0.000000] tsc: Detected 1200.000 MHz processor
[    0.000000] tsc: Detected 1190.400 MHz TSC
[    0.000005] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000007] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000012] last_pfn = 0x2b0800 max_arch_pfn = 0x400000000
[    0.000016] MTRR default type: write-back
[    0.000016] MTRR fixed ranges enabled:
[    0.000017]   00000-9FFFF write-back
[    0.000018]   A0000-BFFFF uncachable
[    0.000019]   C0000-FFFFF write-protect
[    0.000019] MTRR variable ranges enabled:
[    0.000020]   0 base 0080000000 mask 7F80000000 uncachable
[    0.000021]   1 base 0060000000 mask 7FE0000000 uncachable
[    0.000022]   2 base 0050000000 mask 7FF0000000 uncachable
[    0.000022]   3 base 004C000000 mask 7FFC000000 uncachable
[    0.000023]   4 base 004A000000 mask 7FFE000000 uncachable
[    0.000023]   5 base 2000000000 mask 6000000000 uncachable
[    0.000024]   6 base 1000000000 mask 7000000000 uncachable
[    0.000025]   7 base 0800000000 mask 7800000000 uncachable
[    0.000025]   8 base 0400000000 mask 7C00000000 uncachable
[    0.000026]   9 base 4000000000 mask 4000000000 uncachable
[    0.000510] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.001305] last_pfn = 0x44c50 max_arch_pfn = 0x400000000
[    0.007477] esrt: Reserving ESRT space from 0x00000000432b4698 to 0x00000000432b46d0.
[    0.007484] Using GB pages for direct mapping
[    0.007912] RAMDISK: [mem 0x32ac5000-0x35559fff]
[    0.007915] ACPI: Early table checksum verification disabled
[    0.007918] ACPI: RSDP 0x0000000044C4E014 000024 (v02 ACRSYS)
[    0.007921] ACPI: XSDT 0x0000000044BEC188 0000EC (v01 ACRSYS ACRPRDCT 00000002      01000013)
[    0.007925] ACPI: FACP 0x0000000044C2E000 00010C (v05 ACRSYS ACRPRDCT 00000002 1025 00040000)
[    0.007929] ACPI: DSDT 0x0000000044BEE000 03C6C9 (v02 ACRSYS ACRPRDCT 00000002 1025 00040000)
[    0.007932] ACPI: FACS 0x0000000044B61000 000040
[    0.007934] ACPI: UEFI 0x0000000044BCE000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.007936] ACPI: SSDT 0x0000000044C4B000 001B60 (v02 ACRSYS ACRPRDCT 00003000 1025 00040000)
[    0.007938] ACPI: SSDT 0x0000000044C4A000 000100 (v02 ACRSYS ACRPRDCT 00003000 1025 00040000)
[    0.007941] ACPI: SSDT 0x0000000044C46000 003389 (v02 ACRSYS ACRPRDCT 00003000 1025 00040000)
[    0.007943] ACPI: SSDT 0x0000000044C3F000 006AA1 (v02 ACRSYS ACRPRDCT 00001000 1025 00040000)
[    0.007945] ACPI: SSDT 0x0000000044C3E000 000781 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
[    0.007947] ACPI: TPM2 0x0000000044C3D000 000034 (v04 ACRSYS ACRPRDCT 00000002 1025 00040000)
[    0.007950] ACPI: LPIT 0x0000000044C3B000 000094 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
[    0.007952] ACPI: WSMT 0x0000000044C3A000 000028 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
[    0.007954] ACPI: SSDT 0x0000000044C39000 000B70 (v02 ACRSYS ACRPRDCT 00001000 1025 00040000)
[    0.007957] ACPI: DBGP 0x0000000044C38000 000034 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
[    0.007959] ACPI: DBG2 0x0000000044C37000 000054 (v00 ACRSYS ACRPRDCT 00000002 1025 00040000)
[    0.007961] ACPI: SSDT 0x0000000044C36000 0007EA (v02 ACRSYS ACRPRDCT 00001000 1025 00040000)
[    0.007963] ACPI: SSDT 0x0000000044C30000 005F61 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
[    0.007966] ACPI: NHLT 0x0000000044C2F000 00002D (v00 ACRSYS ACRPRDCT 00000002 1025 00040000)
[    0.007968] ACPI: HPET 0x0000000044C2D000 000038 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
[    0.007970] ACPI: APIC 0x0000000044C2C000 00012C (v03 ACRSYS ACRPRDCT 00000002 1025 00040000)
[    0.007973] ACPI: MCFG 0x0000000044C2B000 00003C (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
[    0.007975] ACPI: SSDT 0x0000000044BED000 000C9E (v02 ACRSYS ACRPRDCT 00000002 1025 00040000)
[    0.007977] ACPI: DMAR 0x0000000044C4D000 0000A8 (v02 ACRSYS ACRPRDCT 00000002 1025 00040000)
[    0.007979] ACPI: SSDT 0x0000000044BEB000 000164 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
[    0.007981] ACPI: SSDT 0x0000000044BEA000 000835 (v02 ACRSYS ACRPRDCT 00003000 1025 00040000)
[    0.007984] ACPI: FPDT 0x0000000044BE9000 000044 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
[    0.007986] ACPI: BGRT 0x0000000044BE8000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.007988] ACPI: Reserving FACP table memory at [mem 0x44c2e000-0x44c2e10b]
[    0.007989] ACPI: Reserving DSDT table memory at [mem 0x44bee000-0x44c2a6c8]
[    0.007990] ACPI: Reserving FACS table memory at [mem 0x44b61000-0x44b6103f]
[    0.007991] ACPI: Reserving UEFI table memory at [mem 0x44bce000-0x44bce235]
[    0.007992] ACPI: Reserving SSDT table memory at [mem 0x44c4b000-0x44c4cb5f]
[    0.007993] ACPI: Reserving SSDT table memory at [mem 0x44c4a000-0x44c4a0ff]
[    0.007993] ACPI: Reserving SSDT table memory at [mem 0x44c46000-0x44c49388]
[    0.007994] ACPI: Reserving SSDT table memory at [mem 0x44c3f000-0x44c45aa0]
[    0.007995] ACPI: Reserving SSDT table memory at [mem 0x44c3e000-0x44c3e780]
[    0.007996] ACPI: Reserving TPM2 table memory at [mem 0x44c3d000-0x44c3d033]
[    0.007996] ACPI: Reserving LPIT table memory at [mem 0x44c3b000-0x44c3b093]
[    0.007997] ACPI: Reserving WSMT table memory at [mem 0x44c3a000-0x44c3a027]
[    0.007998] ACPI: Reserving SSDT table memory at [mem 0x44c39000-0x44c39b6f]
[    0.007999] ACPI: Reserving DBGP table memory at [mem 0x44c38000-0x44c38033]
[    0.007999] ACPI: Reserving DBG2 table memory at [mem 0x44c37000-0x44c37053]
[    0.008000] ACPI: Reserving SSDT table memory at [mem 0x44c36000-0x44c367e9]
[    0.008001] ACPI: Reserving SSDT table memory at [mem 0x44c30000-0x44c35f60]
[    0.008002] ACPI: Reserving NHLT table memory at [mem 0x44c2f000-0x44c2f02c]
[    0.008002] ACPI: Reserving HPET table memory at [mem 0x44c2d000-0x44c2d037]
[    0.008003] ACPI: Reserving APIC table memory at [mem 0x44c2c000-0x44c2c12b]
[    0.008004] ACPI: Reserving MCFG table memory at [mem 0x44c2b000-0x44c2b03b]
[    0.008005] ACPI: Reserving SSDT table memory at [mem 0x44bed000-0x44bedc9d]
[    0.008006] ACPI: Reserving DMAR table memory at [mem 0x44c4d000-0x44c4d0a7]
[    0.008006] ACPI: Reserving SSDT table memory at [mem 0x44beb000-0x44beb163]
[    0.008007] ACPI: Reserving SSDT table memory at [mem 0x44bea000-0x44bea834]
[    0.008008] ACPI: Reserving FPDT table memory at [mem 0x44be9000-0x44be9043]
[    0.008009] ACPI: Reserving BGRT table memory at [mem 0x44be8000-0x44be8037]
[    0.008023] ACPI: Local APIC address 0xfee00000
[    0.008164] No NUMA configuration found
[    0.008165] Faking a node at [mem 0x0000000000000000-0x00000002b07fffff]
[    0.008172] NODE_DATA(0) allocated [mem 0x2b07d6000-0x2b07fffff]
[    0.008427] Zone ranges:
[    0.008428]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.008429]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.008430]   Normal   [mem 0x0000000100000000-0x00000002b07fffff]
[    0.008431]   Device   empty
[    0.008432] Movable zone start for each node
[    0.008435] Early memory node ranges
[    0.008436]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.008437]   node   0: [mem 0x0000000000100000-0x0000000040767fff]
[    0.008438]   node   0: [mem 0x0000000041068000-0x0000000042e7efff]
[    0.008439]   node   0: [mem 0x0000000044c4f000-0x0000000044c4ffff]
[    0.008439]   node   0: [mem 0x0000000100000000-0x00000002b07fffff]
[    0.008441] Initmem setup node 0 [mem 0x0000000000001000-0x00000002b07fffff]
[    0.008442] On node 0 totalpages: 2043166
[    0.008443]   DMA zone: 64 pages used for memmap
[    0.008443]   DMA zone: 22 pages reserved
[    0.008444]   DMA zone: 3998 pages, LIFO batch:0
[    0.008445]   DMA32 zone: 4182 pages used for memmap
[    0.008445]   DMA32 zone: 267648 pages, LIFO batch:63
[    0.008446]   Normal zone: 27680 pages used for memmap
[    0.008446]   Normal zone: 1771520 pages, LIFO batch:63
[    0.008448] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.008469] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.009985] On node 0, zone DMA32: 2304 pages in unavailable ranges
[    0.010044] On node 0, zone DMA32: 7632 pages in unavailable ranges
[    0.010325] On node 0, zone Normal: 13232 pages in unavailable ranges
[    0.010508] On node 0, zone Normal: 30720 pages in unavailable ranges
[    0.010530] Reserving Intel graphics memory at [mem 0x4b800000-0x4f7fffff]
[    0.010854] ACPI: PM-Timer IO Port: 0x1808
[    0.010856] ACPI: Local APIC address 0xfee00000
[    0.010861] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.010862] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.010863] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.010863] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.010864] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.010864] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.010865] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.010866] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.010866] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
[    0.010867] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
[    0.010868] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
[    0.010868] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
[    0.010869] ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
[    0.010869] ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
[    0.010870] ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
[    0.010871] ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
[    0.010905] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.010907] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.010908] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.010909] ACPI: IRQ0 used by override.
[    0.010910] ACPI: IRQ9 used by override.
[    0.010911] Using ACPI (MADT) for SMP configuration information
[    0.010912] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.010917] e820: update [mem 0x3cd2f000-0x3ce22fff] usable ==> reserved
[    0.010923] TSC deadline timer available
[    0.010924] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.010938] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.010940] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]
[    0.010941] PM: hibernation: Registered nosave memory: [mem 0x3cd2f000-0x3ce22fff]
[    0.010942] PM: hibernation: Registered nosave memory: [mem 0x40768000-0x41067fff]
[    0.010944] PM: hibernation: Registered nosave memory: [mem 0x42e7f000-0x4324efff]
[    0.010944] PM: hibernation: Registered nosave memory: [mem 0x4324f000-0x442befff]
[    0.010945] PM: hibernation: Registered nosave memory: [mem 0x442bf000-0x44bcefff]
[    0.010946] PM: hibernation: Registered nosave memory: [mem 0x44bcf000-0x44c4efff]
[    0.010947] PM: hibernation: Registered nosave memory: [mem 0x44c50000-0x48ffffff]
[    0.010948] PM: hibernation: Registered nosave memory: [mem 0x49000000-0x49dfffff]
[    0.010948] PM: hibernation: Registered nosave memory: [mem 0x49e00000-0xcfffffff]
[    0.010949] PM: hibernation: Registered nosave memory: [mem 0xd0000000-0xfc7fffff]
[    0.010950] PM: hibernation: Registered nosave memory: [mem 0xfc800000-0xfe7fffff]
[    0.010950] PM: hibernation: Registered nosave memory: [mem 0xfe800000-0xfecfffff]
[    0.010951] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.010952] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed0ffff]
[    0.010952] PM: hibernation: Registered nosave memory: [mem 0xfed10000-0xfed17fff]
[    0.010953] PM: hibernation: Registered nosave memory: [mem 0xfed18000-0xfed1ffff]
[    0.010953] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff]
[    0.010954] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed9ffff]
[    0.010955] PM: hibernation: Registered nosave memory: [mem 0xfeda0000-0xfeda1fff]
[    0.010955] PM: hibernation: Registered nosave memory: [mem 0xfeda2000-0xfedfffff]
[    0.010956] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.010957] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xff5fffff]
[    0.010957] PM: hibernation: Registered nosave memory: [mem 0xff600000-0xffffffff]
[    0.010959] [mem 0xd0000000-0xfc7fffff] available for PCI devices
[    0.010960] Booting paravirtualized kernel on bare hardware
[    0.010963] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.014600] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[    0.014754] percpu: Embedded 58 pages/cpu s200536 r8192 d28840 u262144
[    0.014759] pcpu-alloc: s200536 r8192 d28840 u262144 alloc=1*2097152
[    0.014760] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[    0.014782] Built 1 zonelists, mobility grouping on.  Total pages: 2011218
[    0.014783] Policy zone: Normal
[    0.014784] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.10.0-10-amd64 root=UUID=3689a581-4108-4bf8-975b-dc3bd58ede22 ro
[    0.015067] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.015203] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.015258] mem auto-init: stack:off, heap alloc:on, heap free:off
[    0.021526] Memory: 1036336K/8172664K available (12295K kernel code, 2545K rwdata, 7564K rodata, 2408K init, 3684K bss, 361772K reserved, 0K cma-reserved)
[    0.021532] random: get_random_u64 called from __kmem_cache_create+0x2a/0x4d0 with crng_init=0
[    0.021607] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.021616] ftrace: allocating 36444 entries in 143 pages
[    0.031160] ftrace: allocated 143 pages with 5 groups
[    0.031245] rcu: Hierarchical RCU implementation.
[    0.031246] rcu:   RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[    0.031247]  Rude variant of Tasks RCU enabled.
[    0.031248]  Tracing variant of Tasks RCU enabled.
[    0.031249] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.031250] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.033874] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16
[    0.034254] random: crng done (trusting CPU's manufacturer)
[    0.034271] Console: colour dummy device 80x25
[    0.034430] printk: console [tty0] enabled
[    0.034441] ACPI: Core revision 20200925
[    0.034632] hpet: HPET dysfunctional in PC10. Force disabled.
[    0.034634] APIC: Switch to symmetric I/O mode setup
[    0.034637] DMAR: Host address width 39
[    0.034638] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.034643] DMAR: dmar0: reg_base_addr fed90000 ver 4:0 cap 1c0000c40660462 ecap 49e2ff0505e
[    0.034645] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.034650] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[    0.034653] DMAR: RMRR base: 0x00000044143000 end: 0x00000044162fff
[    0.034655] DMAR: RMRR base: 0x0000004b000000 end: 0x0000004f7fffff
[    0.034657] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.034658] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.034660] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[    0.034660] DMAR-IR: Use '
intremap=no_x2apic_optout' to override the BIOS setting.
[    0.036274] DMAR-IR: Enabled IRQ remapping in xapic mode
[    0.036276] x2apic: IRQ remapping doesn'
t support X2APIC mode
[    0.040709] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1128af0325d, max_idle_ns: 440795261011 ns
[    0.040715] Calibrating delay loop (skipped), value calculated using timer frequency.. 2380.80 BogoMIPS (lpj=4761600)
[    0.040718] pid_max: default: 32768 minimum: 301
[    0.043187] LSM: Security Framework initializing
[    0.043199] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.043219] AppArmor: AppArmor initialized
[    0.043221] TOMOYO Linux initialized
[    0.043238] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.043247] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.043435] x86/cpu: User Mode Instruction Prevention (UMIP) activated
[    0.043461] mce: CPU0: Thermal monitoring enabled (TM1)
[    0.043499] process: using mwait in idle threads
[    0.043501] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.043502] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.043507] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.043509] Spectre V2 : Mitigation: Enhanced IBRS
[    0.043510] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.043512] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.043514] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.043647] Freeing SMP alternatives memory: 32K
[    0.044712] smpboot: CPU0: Intel(R) Core(TM) i5-1035G1 CPU @ 1.00GHz (family: 0x6, model: 0x7e, stepping: 0x5)
[    0.044712] Performance Events: PEBS fmt4+-baseline,  AnyThread deprecated, Icelake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.044712] ... version:                5
[    0.044712] ... bit width:              48
[    0.044712] ... generic registers:      8
[    0.044712] ... value mask:             0000ffffffffffff
[    0.044712] ... max period:             00007fffffffffff
[    0.044712] ... fixed-purpose events:   4
[    0.044712] ... event mask:             0001000f000000ff
[    0.044712] rcu: Hierarchical SRCU implementation.
[    0.044712] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.044712] smp: Bringing up secondary CPUs ...
[    0.044712] x86: Booting SMP configuration:
[    0.044712] .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
[    0.049254] smp: Brought up 1 node, 8 CPUs
[    0.049254] smpboot: Max logical packages: 1
[    0.049254] smpboot: Total of 8 processors activated (19046.40 BogoMIPS)
[    0.062260] node 0 deferred pages initialised in 8ms
[    0.063070] devtmpfs: initialized
[    0.063070] x86/mm: Memory block size: 128MB
[    0.063070] PM: Registering ACPI NVS region [mem 0x442bf000-0x44bcefff] (9502720 bytes)
[    0.063070] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.063070] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.063070] pinctrl core: initialized pinctrl subsystem
[    0.063070] NET: Registered protocol family 16
[    0.063070] audit: initializing netlink subsys (disabled)
[    0.064735] audit: type=2000 audit(1642052840.024:1): state=initialized audit_enabled=0 res=1
[    0.064783] thermal_sys: Registered thermal governor 'fair_share'
[    0.064784] thermal_sys: Registered thermal governor 'bang_bang'
[    0.064786] thermal_sys: Registered thermal governor 'step_wise'
[    0.064788] thermal_sys: Registered thermal governor 'user_space'
[    0.064789] thermal_sys: Registered thermal governor 'power_allocator'
[    0.064807] cpuidle: using governor ladder
[    0.064807] cpuidle: using governor menu
[    0.064807] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.064807] ACPI: bus type PCI registered
[    0.064807] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.064809] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000)
[    0.064814] PCI: MMCONFIG at [mem 0xc0000000-0xcfffffff] reserved in E820
[    0.064831] PCI: Using configuration type 1 for base access
[    0.065145] ENERGY_PERF_BIAS: Set to '
normal', was 'performance'
[    0.065373] Kprobes globally optimized
[    0.065381] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.065381] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.189116] ACPI: Added _OSI(Module Device)
[    0.189116] ACPI: Added _OSI(Processor Device)
[    0.189116] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.189116] ACPI: Added _OSI(Processor Aggregator Device)
[    0.189116] ACPI: Added _OSI(Linux-Dell-Video)
[    0.189116] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.189116] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.235249] ACPI: 12 ACPI AML tables successfully acquired and loaded
[    0.242617] ACPI: Dynamic OEM Table Load:
[    0.242630] ACPI: SSDT 0xFFFF948B00F18E00 0000F4 (v02 PmRef  Cpu0Psd  00003000 INTL 20160422)
[    0.243740] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked
[    0.245265] ACPI: Dynamic OEM Table Load:
[    0.245273] ACPI: SSDT 0xFFFF948B00F16400 000386 (v02 PmRef  Cpu0Cst  00003001 INTL 20160422)
[    0.246556] ACPI: Dynamic OEM Table Load:
[    0.246562] ACPI: SSDT 0xFFFF948B00F10000 000371 (v02 PmRef  Cpu0Ist  00003000 INTL 20160422)
[    0.247629] ACPI: Dynamic OEM Table Load:
[    0.247633] ACPI: SSDT 0xFFFF948CA5949C00 00012C (v02 PmRef  Cpu0Hwp  00003000 INTL 20160422)
[    0.248496] ACPI: Dynamic OEM Table Load:
[    0.248501] ACPI: SSDT 0xFFFF948B00BE9000 000724 (v02 PmRef  HwpLvt   00003000 INTL 20160422)
[    0.249782] ACPI: Dynamic OEM Table Load:
[    0.249789] ACPI: SSDT 0xFFFF948B00BEF800 0005FC (v02 PmRef  ApIst    00003000 INTL 20160422)
[    0.251032] ACPI: Dynamic OEM Table Load:
[    0.251053] ACPI: SSDT 0xFFFF948B00F11400 000317 (v02 PmRef  ApHwp    00003000 INTL 20160422)
[    0.252079] ACPI: Dynamic OEM Table Load:
[    0.252084] ACPI: SSDT 0xFFFF948B00F0E000 000AB0 (v02 PmRef  ApPsd    00003000 INTL 20160422)
[    0.253494] ACPI: Dynamic OEM Table Load:
[    0.253501] ACPI: SSDT 0xFFFF948B00F14800 00030A (v02 PmRef  ApCst    00003000 INTL 20160422)
[    0.258011] ACPI: EC: EC started
[    0.258013] ACPI: EC: interrupt blocked
[    0.258364] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.258367] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions
[    0.258368] ACPI: Interpreter enabled
[    0.258418] ACPI: (supports S0 S3 S4 S5)
[    0.258420] ACPI: Using IOAPIC for interrupt routing
[    0.258477] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.259816] ACPI: Enabled 7 GPEs in block 00 to 7F
[    0.268689] ACPI: Power Resource [DRST] (on)
[    0.272381] ACPI: Power Resource [V0PR] (on)
[    0.272495] ACPI: Power Resource [V1PR] (on)
[    0.272601] ACPI: Power Resource [V2PR] (on)
[    0.276811] ACPI: Power Resource [WRST] (on)
[    0.276965] acpi ABCD0000:00: ACPI dock station (docks/bays count: 1)
[    0.280535] ACPI: Power Resource [TBT0] (on)
[    0.280551] ACPI: Power Resource [TBT1] (on)
[    0.285211] ACPI: Power Resource [FN00] (off)
[    0.285275] ACPI: Power Resource [FN01] (off)
[    0.285354] ACPI: Power Resource [FN02] (off)
[    0.285410] ACPI: Power Resource [FN03] (off)
[    0.285467] ACPI: Power Resource [FN04] (off)
[    0.286056] ACPI: Power Resource [PIN] (off)
[    0.286536] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.286542] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.286788] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME AER]
[    0.287004] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability LTR]
[    0.287005] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.289993] PCI host bridge to bus 0000:00
[    0.289997] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.289999] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.290001] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.290003] pci_bus 0000:00: root bus resource [mem 0x4f800000-0xbfffffff window]
[    0.290005] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x7fffffffff window]
[    0.290007] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.290034] pci 0000:00:00.0: [8086:8a12] type 00 class 0x060000
[    0.291440] pci 0000:00:02.0: [8086:8a56] type 00 class 0x030000
[    0.291452] pci 0000:00:02.0: reg 0x10: [mem 0x6000000000-0x6000ffffff 64bit]
[    0.291459] pci 0000:00:02.0: reg 0x18: [mem 0x4000000000-0x400fffffff 64bit pref]
[    0.291464] pci 0000:00:02.0: reg 0x20: [io  0x4000-0x403f]
[    0.291482] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.291484] pci 0000:00:02.0: DMAR: Skip IOMMU disabling for graphics
[    0.292510] pci 0000:00:14.0: [8086:34ed] type 00 class 0x0c0330
[    0.292531] pci 0000:00:14.0: reg 0x10: [mem 0x4fc00000-0x4fc0ffff 64bit]
[    0.292612] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.293812] pci 0000:00:14.2: [8086:34ef] type 00 class 0x050000
[    0.293872] pci 0000:00:14.2: reg 0x10: [mem 0x6001104000-0x6001105fff 64bit]
[    0.293891] pci 0000:00:14.2: reg 0x18: [mem 0x600110a000-0x600110afff 64bit]
[    0.295201] pci 0000:00:15.0: [8086:34e8] type 00 class 0x0c8000
[    0.295312] pci 0000:00:15.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[    0.296440] pci 0000:00:15.1: [8086:34e9] type 00 class 0x0c8000
[    0.296499] pci 0000:00:15.1: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[    0.297859] pci 0000:00:16.0: [8086:34e0] type 00 class 0x078000
[    0.297887] pci 0000:00:16.0: reg 0x10: [mem 0x6001107000-0x6001107fff 64bit]
[    0.297989] pci 0000:00:16.0: PME# supported from D3hot
[    0.299280] pci 0000:00:17.0: [8086:34d3] type 00 class 0x010601
[    0.299298] pci 0000:00:17.0: reg 0x10: [mem 0x4fc10000-0x4fc11fff]
[    0.299308] pci 0000:00:17.0: reg 0x14: [mem 0x4fc14000-0x4fc140ff]
[    0.299318] pci 0000:00:17.0: reg 0x18: [io  0x4080-0x4087]
[    0.299328] pci 0000:00:17.0: reg 0x1c: [io  0x4088-0x408b]
[    0.299337] pci 0000:00:17.0: reg 0x20: [io  0x4060-0x407f]
[    0.299347] pci 0000:00:17.0: reg 0x24: [mem 0x4fc13000-0x4fc137ff]
[    0.299400] pci 0000:00:17.0: PME# supported from D3hot
[    0.300418] pci 0000:00:1d.0: [8086:34b0] type 01 class 0x060400
[    0.300522] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.300555] pci 0000:00:1d.0: PTM enabled (root), 4ns granularity
[    0.301708] pci 0000:00:1d.1: [8086:34b1] type 01 class 0x060400
[    0.301825] pci 0000:00:1d.1: PME# supported from D0 D3hot D3cold
[    0.301862] pci 0000:00:1d.1: PTM enabled (root), 4ns granularity
[    0.303121] pci 0000:00:1d.4: [8086:34b4] type 01 class 0x060400
[    0.303249] pci 0000:00:1d.4: PME# supported from D0 D3hot D3cold
[    0.303285] pci 0000:00:1d.4: PTM enabled (root), 4ns granularity
[    0.304309] pci 0000:00:1f.0: [8086:3482] type 00 class 0x060100
[    0.305468] pci 0000:00:1f.3: [8086:34c8] type 00 class 0x040380
[    0.305529] pci 0000:00:1f.3: reg 0x10: [mem 0x6001100000-0x6001103fff 64bit]
[    0.305630] pci 0000:00:1f.3: reg 0x20: [mem 0x6001000000-0x60010fffff 64bit]
[    0.305797] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.307111] pci 0000:00:1f.4: [8086:34a3] type 00 class 0x0c0500
[    0.307148] pci 0000:00:1f.4: reg 0x10: [mem 0x6001106000-0x60011060ff 64bit]
[    0.307189] pci 0000:00:1f.4: reg 0x20: [io  0x4040-0x405f]
[    0.308163] pci 0000:00:1f.5: [8086:34a4] type 00 class 0x0c8000
[    0.308184] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
[    0.309191] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[    0.309237] pci 0000:01:00.0: reg 0x10: [io  0x3000-0x30ff]
[    0.309271] pci 0000:01:00.0: reg 0x18: [mem 0x4fb04000-0x4fb04fff 64bit]
[    0.309292] pci 0000:01:00.0: reg 0x20: [mem 0x4fb00000-0x4fb03fff 64bit]
[    0.309452] pci 0000:01:00.0: supports D1 D2
[    0.309454] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.309610] pci 0000:00:1d.0: PCI bridge to [bus 01]
[    0.309614] pci 0000:00:1d.0:   bridge window [io  0x3000-0x3fff]
[    0.309618] pci 0000:00:1d.0:   bridge window [mem 0x4fb00000-0x4fbfffff]
[    0.309929] pci 0000:02:00.0: [168c:0042] type 00 class 0x028000
[    0.310134] pci 0000:02:00.0: reg 0x10: [mem 0x4f800000-0x4f9fffff 64bit]
[    0.311323] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.312054] pci 0000:00:1d.1: PCI bridge to [bus 02]
[    0.312060] pci 0000:00:1d.1:   bridge window [mem 0x4f800000-0x4f9fffff]
[    0.312133] pci 0000:03:00.0: [126f:2263] type 00 class 0x010802
[    0.312161] pci 0000:03:00.0: reg 0x10: [mem 0x4fa00000-0x4fa03fff 64bit]
[    0.312405] pci 0000:00:1d.4: PCI bridge to [bus 03]
[    0.312410] pci 0000:00:1d.4:   bridge window [mem 0x4fa00000-0x4fafffff]
[    0.314925] ACPI: EC: interrupt unblocked
[    0.314927] ACPI: EC: event unblocked
[    0.314947] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.314948] ACPI: EC: GPE=0x6e
[    0.314950] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC initialization complete
[    0.314951] ACPI: \_SB_.PCI0.LPCB.EC0_: EC: Used to handle transactions and events
[    0.315026] iommu: Default domain type: Translated
[    0.316752] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.316752] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.316752] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.316752] vgaarb: loaded
[    0.316776] EDAC MC: Ver: 3.0.0
[    0.316966] Registered efivars operations
[    0.316966] NetLabel: Initializing
[    0.316966] NetLabel:  domain hash size = 128
[    0.316966] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.316966] NetLabel:  unlabeled traffic allowed by default
[    0.316966] PCI: Using ACPI for IRQ routing
[    0.343545] PCI: pci_cache_line_size set to 64 bytes
[    0.343672] pci 0000:00:1f.5: can'
t claim BAR 0 [mem 0xfe010000-0xfe010fff]: no compatible bridge window
[    0.343813] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.343814] e820: reserve RAM buffer [mem 0x3cd2f000-0x3fffffff]
[    0.343814] e820: reserve RAM buffer [mem 0x40768000-0x43ffffff]
[    0.343815] e820: reserve RAM buffer [mem 0x42e7f000-0x43ffffff]
[    0.343815] e820: reserve RAM buffer [mem 0x44c50000-0x47ffffff]
[    0.343816] e820: reserve RAM buffer [mem 0x2b0800000-0x2b3ffffff]
[    0.344664] clocksource: Switched to clocksource tsc-early
[    0.347436] VFS: Disk quotas dquot_6.6.0
[    0.347449] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.347528] AppArmor: AppArmor Filesystem Enabled
[    0.347543] pnp: PnP ACPI init
[    0.347723] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.347725] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.347726] system 00:00: [io  0xfd60-0xfd63] has been reserved
[    0.347730] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.347761] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.347824] system 00:02: [io  0x1854-0x1857] has been reserved
[    0.347826] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.347846] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.348403] system 00:04: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.348405] system 00:04: [mem 0xfeda0000-0xfeda0fff] has been reserved
[    0.348406] system 00:04: [mem 0xfeda1000-0xfeda1fff] has been reserved
[    0.348407] system 00:04: [mem 0xc0000000-0xcfffffff] has been reserved
[    0.348409] system 00:04: [mem 0xfed20000-0xfed7ffff] could not be reserved
[    0.348410] system 00:04: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.348412] system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.348414] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.348841] system 00:05: [io  0x1800-0x18fe] could not be reserved
[    0.348843] system 00:05: [mem 0xfd000000-0xfd68ffff] has been reserved
[    0.348845] system 00:05: [mem 0xfd6b0000-0xfd6cffff] has been reserved
[    0.348846] system 00:05: [mem 0xfd6f0000-0xfdffffff] has been reserved
[    0.348848] system 00:05: [mem 0xfe000000-0xfe01ffff] has been reserved
[    0.348849] system 00:05: [mem 0xfe200000-0xfe7fffff] has been reserved
[    0.348850] system 00:05: [mem 0xfe0b0000-0xfe0b0fff] has been reserved
[    0.348852] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
[    0.348854] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.349053] system 00:06: [io  0x2000-0x20fe] has been reserved
[    0.349055] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.349193] system 00:07: [mem 0xfe038000-0xfe038fff] has been reserved
[    0.349195] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.349339] pnp: PnP ACPI: found 8 devices
[    0.354791] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.354828] NET: Registered protocol family 2
[    0.354908] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.355516] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    0.355554] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.355698] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    0.355762] TCP: Hash tables configured (established 65536 bind 65536)
[    0.355800] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.355820] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.355978] NET: Registered protocol family 1
[    0.355984] NET: Registered protocol family 44
[    0.355996] pci 0000:00:15.0: BAR 0: assigned [mem 0x4010000000-0x4010000fff 64bit]
[    0.356048] pci 0000:00:15.1: BAR 0: assigned [mem 0x4010001000-0x4010001fff 64bit]
[    0.356097] pci 0000:00:1f.5: BAR 0: no space for [mem size 0x00001000]
[    0.356100] pci 0000:00:1f.5: BAR 0: trying firmware assignment [mem 0xfe010000-0xfe010fff]
[    0.356102] pci 0000:00:1f.5: BAR 0: [mem 0xfe010000-0xfe010fff] conflicts with Reserved [mem 0xfc800000-0xfe7fffff]
[    0.356104] pci 0000:00:1f.5: BAR 0: failed to assign [mem size 0x00001000]
[    0.356107] pci 0000:00:1d.0: PCI bridge to [bus 01]
[    0.356111] pci 0000:00:1d.0:   bridge window [io  0x3000-0x3fff]
[    0.356117] pci 0000:00:1d.0:   bridge window [mem 0x4fb00000-0x4fbfffff]
[    0.356125] pci 0000:00:1d.1: PCI bridge to [bus 02]
[    0.356130] pci 0000:00:1d.1:   bridge window [mem 0x4f800000-0x4f9fffff]
[    0.356158] pci 0000:00:1d.4: PCI bridge to [bus 03]
[    0.356163] pci 0000:00:1d.4:   bridge window [mem 0x4fa00000-0x4fafffff]
[    0.356171] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc
[    0.356173] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.356174] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.356176] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.356178] pci_bus 0000:00: resource 7 [mem 0x4f800000-0xbfffffff window]
[    0.356179] pci_bus 0000:00: resource 8 [mem 0x4000000000-0x7fffffffff window]
[    0.356181] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    0.356182] pci_bus 0000:01: resource 1 [mem 0x4fb00000-0x4fbfffff]
[    0.356184] pci_bus 0000:02: resource 1 [mem 0x4f800000-0x4f9fffff]
[    0.356186] pci_bus 0000:03: resource 1 [mem 0x4fa00000-0x4fafffff]
[    0.356325] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.358280] PCI: CLS 64 bytes, default 64
[    0.358320] Trying to unpack rootfs image as initramfs...
[    0.854407] Freeing initrd memory: 43604K
[    0.854489] DMAR: No ATSR found
[    0.854519] DMAR: dmar0: Using Queued invalidation
[    0.854522] DMAR: dmar1: Using Queued invalidation
[    0.854801] pci 0000:00:00.0: Adding to iommu group 0
[    0.854808] pci 0000:00:02.0: Adding to iommu group 1
[    0.854818] pci 0000:00:14.0: Adding to iommu group 2
[    0.854823] pci 0000:00:14.2: Adding to iommu group 2
[    0.854833] pci 0000:00:15.0: Adding to iommu group 3
[    0.854838] pci 0000:00:15.1: Adding to iommu group 3
[    0.854845] pci 0000:00:16.0: Adding to iommu group 4
[    0.854862] pci 0000:00:17.0: Adding to iommu group 5
[    0.854875] pci 0000:00:1d.0: Adding to iommu group 6
[    0.854882] pci 0000:00:1d.1: Adding to iommu group 7
[    0.854890] pci 0000:00:1d.4: Adding to iommu group 8
[    0.854903] pci 0000:00:1f.0: Adding to iommu group 9
[    0.854910] pci 0000:00:1f.3: Adding to iommu group 9
[    0.854925] pci 0000:00:1f.4: Adding to iommu group 9
[    0.854931] pci 0000:00:1f.5: Adding to iommu group 9
[    0.854940] pci 0000:01:00.0: Adding to iommu group 10
[    0.854948] pci 0000:02:00.0: Adding to iommu group 11
[    0.854956] pci 0000:03:00.0: Adding to iommu group 12
[    0.856553] DMAR: Intel(R) Virtualization Technology for Directed I/O
[    0.856555] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.856557] software IO TLB: mapped [mem 0x0000000038b07000-0x000000003cb07000] (64MB)
[    0.856665] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1128af0325d, max_idle_ns: 440795261011 ns
[    0.856741] clocksource: Switched to clocksource tsc
[    0.857276] Initialise system trusted keyrings
[    0.857287] Key type blacklist registered
[    0.857369] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[    0.858297] zbud: loaded
[    0.858458] integrity: Platform Keyring initialized
[    0.858460] Key type asymmetric registered
[    0.858462] Asymmetric key parser 'x509' registered
[    0.858468] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    0.858497] io scheduler mq-deadline registered
[    0.861434] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.861445] efifb: probing for efifb
[    0.861454] efifb: framebuffer at 0x4000000000, using 8128k, total 8128k
[    0.861455] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[    0.861457] efifb: scrolling: redraw
[    0.861458] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.864396] Console: switching to colour frame buffer device 240x67
[    0.867251] fb0: EFI VGA frame buffer device
[    0.867267] intel_idle: MWAIT substates: 0x11121020
[    0.867413] Monitor-Mwait will be used to enter C-1 state
[    0.867416] Monitor-Mwait will be used to enter C-2 state
[    0.867417] Monitor-Mwait will be used to enter C-3 state
[    0.867419] ACPI: \_SB_.PR00: Found 3 idle states
[    0.867433] intel_idle: v0.5.1 model 0x7E
[    0.867965] intel_idle: Local APIC timer is reliable in all C-states
[    0.870124] thermal LNXTHERM:00: registered as thermal_zone0
[    0.870142] ACPI: Thermal Zone [TZ00] (28 C)
[    0.870326] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.870866] hpet_acpi_add: no address or irqs in _CRS
[    0.870902] Linux agpgart interface v0.103
[    0.870935] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug.
[    0.871636] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    0.871654] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.872208] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.872293] mousedev: PS/2 mouse device common for all mice
[    0.872355] rtc_cmos 00:01: RTC can wake from S4
[    0.872963] rtc_cmos 00:01: registered as rtc0
[    0.873167] rtc_cmos 00:01: setting system clock to 2022-01-13T05:47:21 UTC (1642052841)
[    0.873194] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram
[    0.873214] intel_pstate: Intel P-state driver initializing
[    0.873965] intel_pstate: HWP enabled
[    0.874320] ledtrig-cpu: registered to indicate activity on CPUs
[    0.874578] NET: Registered protocol family 10
[    0.881155] Segment Routing with IPv6
[    0.881193] mip6: Mobile IPv6
[    0.881206] NET: Registered protocol family 17
[    0.881430] mpls_gso: MPLS GSO support
[    0.882473] microcode: sig=0x706e5, pf=0x80, revision=0xa6
[    0.882671] microcode: Microcode Update Driver: v2.2.
[    0.882676] IPI shorthand broadcast: enabled
[    0.882713] sched_clock: Marking stable (875848516, 6547353)->(894856054, -12460185)
[    0.882851] registered taskstats version 1
[    0.882865] Loading compiled-in X.509 certificates
[    0.883097] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.910131] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[    0.910170] Loaded X.509 cert 'Debian Secure Boot Signer 2021 - linux: 4b6ef5abca669825178e052c84667ccbc0531f8c'
[    0.910241] zswap: loaded using pool lzo/zbud
[    0.910868] Key type ._fscrypt registered
[    0.910881] Key type .fscrypt registered
[    0.910892] Key type fscrypt-provisioning registered
[    0.910936] AppArmor: AppArmor sha1 policy hashing enabled
[    0.916429] Freeing unused kernel image (initmem) memory: 2408K
[    0.932914] Write protecting the kernel read-only data: 22528k
[    0.933759] Freeing unused kernel image (text/rodata gap) memory: 2040K
[    0.934050] Freeing unused kernel image (rodata/data gap) memory: 628K
[    0.945362] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.946291] Run /init as init process
[    0.947161]   with arguments:
[    0.947161]     /init
[    0.947180]   with environment:
[    0.947180]     HOME=/
[    0.947180]     TERM=linux
[    0.947181]     BOOT_IMAGE=/boot/vmlinuz-5.10.0-10-amd64
[    1.038312] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[    1.039468] battery: ACPI: Battery Slot [BAT1] (battery present)
[    1.040223] acpi PNP0C14:03: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[    1.048551] hid: raw HID events driver (C) Jiri Kosina
[    1.054114] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[    1.056601] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[    1.061006] SCSI subsystem initialized
[    1.061880] i2c i2c-0: 2/2 memory slots populated (from DMI)
[    1.066303] cryptd: max_cpu_qlen set to 1000
[    1.068753] intel-lpss 0000:00:15.0: enabling device (0004 -> 0006)
[    1.069174] idma64 idma64.0: Found Intel integrated DMA 64-bit
[    1.079376] libata version 3.00 loaded.
[    1.082331] r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.087399] ahci 0000:00:17.0: version 3.0
[    1.087697] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    1.089123] ahci 0000:00:17.0: flags: 64bit ncq sntf pm clo only pio slum part deso sadm sds apst
[    1.091136] ACPI: bus type USB registered
[    1.093634] usbcore: registered new interface driver usbfs
[    1.096137] usbcore: registered new interface driver hub
[    1.096203] AVX2 version of gcm_enc/dec engaged.
[    1.097781] usbcore: registered new device driver usb
[    1.099584] AES CTR mode by8 optimization enabled
[    1.100750] intel-lpss 0000:00:15.1: enabling device (0004 -> 0006)
[    1.105160] idma64 idma64.1: Found Intel integrated DMA 64-bit
[    1.105192] libphy: r8169: probed
[    1.105481] scsi host0: ahci
[    1.110013] scsi host1: ahci
[    1.111562] r8169 0000:01:00.0 eth0: RTL8168h/8111h, 08:97:98:87:f7:86, XID 541, IRQ 126
[    1.112959] ata1: SATA max UDMA/133 abar m2048@0x4fc13000 port 0x4fc13100 irq 125
[    1.114322] i2c_hid i2c-ELAN0504:01: supply vdd not found, using dummy regulator
[    1.114353] i2c_hid i2c-ELAN0504:01: supply vddl not found, using dummy regulator
[    1.115490] r8169 0000:01:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[    1.117081] ata2: SATA max UDMA/133 abar m2048@0x4fc13000 port 0x4fc13180 irq 125
[    1.124300] nvme nvme0: pci function 0000:03:00.0
[    1.129021] r8169 0000:01:00.0 enp1s0: renamed from eth0
[    1.132399] nvme nvme0: missing or invalid SUBNQN field.
[    1.132534] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.135612] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    1.138874] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x110 quirks 0x0000000000009810
[    1.140014] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.141323] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[    1.142364] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.143323] usb usb1: Product: xHCI Host Controller
[    1.144303] usb usb1: Manufacturer: Linux 5.10.0-10-amd64 xhci-hcd
[    1.145569] usb usb1: SerialNumber: 0000:00:14.0
[    1.146772] hub 1-0:1.0: USB hub found
[    1.147810] hub 1-0:1.0: 12 ports detected
[    1.149358] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.150400] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.151386] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
[    1.152385] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
[    1.152443] nvme nvme0: allocated 64 MiB host memory buffer.
[    1.153575] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.153576] usb usb2: Product: xHCI Host Controller
[    1.153577] usb usb2: Manufacturer: Linux 5.10.0-10-amd64 xhci-hcd
[    1.153577] usb usb2: SerialNumber: 0000:00:14.0
[    1.153781] hub 2-0:1.0: USB hub found
[    1.161049] hub 2-0:1.0: 6 ports detected
[    1.162118] usb: port power management may be unreliable
[    1.171911] nvme nvme0: 8/0/0 default/read/poll queues
[    1.178244]  nvme0n1: p1 p2 p3
[    1.199042] input: ELAN0504:01 04F3:312A Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-ELAN0504:01/0018:04F3:312A.0001/input/input1
[    1.200174] input: ELAN0504:01 04F3:312A Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-ELAN0504:01/0018:04F3:312A.0001/input/input3
[    1.201439] hid-generic 0018:04F3:312A.0001: input,hidraw0: I2C HID v1.00 Mouse [ELAN0504:01 04F3:312A] on i2c-ELAN0504:01
[    1.408818] usb 1-7: new high-speed USB device number 2 using xhci_hcd
[    1.440814] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.442435] ata2: SATA link down (SStatus 4 SControl 300)
[    1.495102] ata1.00: ATA-8: ST9250410ASG, 0004SDM1, max UDMA/133
[    1.496765] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 32)
[    1.501306] ata1.00: configured for UDMA/133
[    1.506538] scsi 0:0:0:0: Direct-Access     ATA      ST9250410ASG     SDM1 PQ: 0 ANSI: 5
[    1.514991] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[    1.516522] sd 0:0:0:0: [sda] Write Protect is off
[    1.518550] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.518569] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.578795] usb 1-7: New USB device found, idVendor=04f2, idProduct=b5e0, bcdDevice=14.10
[    1.580387] usb 1-7: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    1.582428] usb 1-7: Product: VGA WebCam
[    1.583985] usb 1-7: Manufacturer: Chicony Electronics Co.,Ltd.
[    1.585864] usb 1-7: SerialNumber: 0x0001
[    1.607014]  sda: sda1
[    1.620962] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.716787] usb 1-10: new full-speed USB device number 3 using xhci_hcd
[    1.866885] usb 1-10: New USB device found, idVendor=04ca, idProduct=3015, bcdDevice= 0.01
[    1.868425] usb 1-10: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.944568] PM: Image not found (code -22)
[    2.035538] EXT4-fs (nvme0n1p2): mounted filesystem with ordered data mode. Opts: (null)
[    2.079156] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[    2.115189] systemd[1]: Inserted module '
autofs4'
[    2.218830] systemd[1]: systemd 247.3-6 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
[    2.241038] systemd[1]: Detected architecture x86-64.
[    2.250457] systemd[1]: Set hostname to <belem>.
[    2.318764] systemd[1]: Queued start job for default target Graphical Interface.
[    2.320352] systemd[1]: Created slice system-getty.slice.
[    2.322991] systemd[1]: Created slice system-modprobe.slice.
[    2.325065] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    2.327263] systemd[1]: Created slice User and Session Slice.
[    2.329322] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    2.331409] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    2.333628] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    2.335710] systemd[1]: Reached target Local Encrypted Volumes.
[    2.337899] systemd[1]: Reached target User and Group Name Lookups.
[    2.339961] systemd[1]: Reached target Paths.
[    2.342384] systemd[1]: Reached target Remote File Systems.
[    2.344417] systemd[1]: Reached target Slices.
[    2.346989] systemd[1]: Listening on Syslog Socket.
[    2.349022] systemd[1]: Listening on fsck to fsckd communication Socket.
[    2.351151] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    2.353257] systemd[1]: Listening on Journal Audit Socket.
[    2.355395] systemd[1]: Listening on Journal Socket (/dev/log).
[    2.357504] systemd[1]: Listening on Journal Socket.
[    2.360168] systemd[1]: Listening on udev Control Socket.
[    2.362508] systemd[1]: Listening on udev Kernel Socket.
[    2.364913] systemd[1]: Mounting Huge Pages File System...
[    2.367656] systemd[1]: Mounting POSIX Message Queue File System...
[    2.370555] systemd[1]: Mounting Kernel Debug File System...
[    2.373327] systemd[1]: Mounting Kernel Trace File System...
[    2.376223] systemd[1]: Starting Set the console keyboard layout...
[    2.379365] systemd[1]: Starting Create list of static device nodes for the current kernel...
[    2.382481] systemd[1]: Starting Load Kernel Module configfs...
[    2.385353] systemd[1]: Starting Load Kernel Module drm...
[    2.388525] systemd[1]: Starting Load Kernel Module fuse...
[    2.392020] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[    2.393337] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[    2.395741] systemd[1]: Starting Journal Service...
[    2.398634] fuse: init (API version 7.32)
[    2.399553] systemd[1]: Starting Load Kernel Modules...
[    2.405148] systemd[1]: Starting Remount Root and Kernel File Systems...
[    2.408841] systemd[1]: Starting Coldplug All udev Devices...
[    2.411795] EXT4-fs (nvme0n1p2): re-mounted. Opts: errors=remount-ro
[    2.416199] systemd[1]: Mounted Huge Pages File System.
[    2.420534] systemd[1]: Mounted POSIX Message Queue File System.
[    2.424612] systemd[1]: Mounted Kernel Debug File System.
[    2.427301] systemd[1]: Mounted Kernel Trace File System.
[    2.429709] systemd[1]: Finished Set the console keyboard layout.
[    2.432122] systemd[1]: Finished Create list of static device nodes for the current kernel.
[    2.434886] systemd[1]: modprobe@configfs.service: Succeeded.
[    2.436068] systemd[1]: Finished Load Kernel Module configfs.
[    2.438621] systemd[1]: modprobe@drm.service: Succeeded.
[    2.439780] systemd[1]: Finished Load Kernel Module drm.
[    2.442210] systemd[1]: modprobe@fuse.service: Succeeded.
[    2.443339] systemd[1]: Finished Load Kernel Module fuse.
[    2.445915] systemd[1]: Finished Load Kernel Modules.
[    2.448233] systemd[1]: Finished Remount Root and Kernel File Systems.
[    2.451844] systemd[1]: Mounting FUSE Control File System...
[    2.455033] systemd[1]: Mounting Kernel Configuration File System...
[    2.457825] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[    2.458987] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[    2.460686] systemd[1]: Starting Load/Save Random Seed...
[    2.464345] systemd[1]: Starting Apply Kernel Variables...
[    2.469680] systemd[1]: Starting Create System Users...
[    2.473559] systemd[1]: Started Journal Service.
[    2.488778] systemd-journald[318]: Received client request to flush runtime journal.
[    2.564950] input: Acer Wireless Radio Control as /devices/LNXSYSTM:00/10251229:00/input/input4
[    2.567383] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1c/PNP0C0D:00/input/input5
[    2.569980] ACPI: Lid Switch [LID0]
[    2.572592] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6
[    2.575538] ACPI: Sleep Button [SLPB]
[    2.577335] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input7
[    2.580665] intel_pmc_core INT33A1:00:  initialized
[    2.600779] ACPI: Power Button [PWRB]
[    2.602442] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8
[    2.604157] ACPI: Power Button [PWRF]
[    2.610658] ACPI: AC Adapter [ACAD] (off-line)
[    2.662171] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.712803] Adding 1000444k swap on /dev/nvme0n1p3.  Priority:-2 extents:1 across:1000444k SSFS
[    2.733509] input: PC Speaker as /devices/platform/pcspkr/input/input9
[    2.743302] iTCO_vendor_support: vendor-support=0
[    2.743850] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[    2.748878] acer_wmi: Acer Laptop ACPI-WMI Extras
[    2.751825] acer_wmi: Function bitmap for Communication Button: 0x801
[    2.769879] input: Acer WMI hotkeys as /devices/virtual/input/input10
[    2.791976] input: ELAN0504:01 04F3:312A Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-ELAN0504:01/0018:04F3:312A.0001/input/input11
[    2.793911] input: ELAN0504:01 04F3:312A Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-ELAN0504:01/0018:04F3:312A.0001/input/input13
[    2.795394] hid-multitouch 0018:04F3:312A.0001: input,hidraw0: I2C HID v1.00 Mouse [ELAN0504:01 04F3:312A] on i2c-ELAN0504:01
[    2.840257] pstore: Using crash dump compression: deflate
[    2.841750] pstore: Registered efi as persistent store backend
[    2.905013] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    2.907998] iTCO_wdt: Found a Intel PCH TCO device (Version=6, TCOBASE=0x0400)
[    2.912816] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    2.981700] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    2.982053] cfg80211: Loaded X.509 cert '
benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf'
[    2.982384] cfg80211: Loaded X.509 cert '
romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
[    2.982706] cfg80211: Loaded X.509 cert '
sforshee: 00b28ddf47aef9cea7'
[    2.983824] platform regulatory.0: firmware: direct-loading firmware regulatory.db
[    2.983954] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s
[    2.988458] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer
[    2.988459] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    2.988460] RAPL PMU: hw unit of domain package 2^-14 Joules
[    2.988461] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    3.149924] i915 0000:00:02.0: [drm] VT-d active for gfx access
[    3.151632] checking generic (4000000000 7f0000) vs hw (6000000000 1000000)
[    3.151634] checking generic (4000000000 7f0000) vs hw (4000000000 10000000)
[    3.151636] fb0: switching to inteldrmfb from EFI VGA
[    3.154063] Console: switching to colour dummy device 80x25
[    3.154362] i915 0000:00:02.0: vgaarb: deactivate vga console
[    3.212880] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    3.213923] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915])
[    3.215256] i915 0000:00:02.0: firmware: direct-loading firmware i915/icl_dmc_ver1_09.bin
[    3.215704] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/icl_dmc_ver1_09.bin (v1.9)
[    3.364437] zram: Added device: zram0
[    3.437354] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380
[    3.437433] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[    3.441752] zram0: detected capacity change from 0 to 268435456
[    3.474007] ath10k_pci 0000:02:00.0: enabling device (0000 -> 0002)
[    3.475718] ath10k_pci 0000:02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[    3.494206] r8169 0000:01:00.0: firmware: direct-loading firmware rtl_nic/rtl8168h-2.fw
[    3.520818] Generic FE-GE Realtek PHY r8169-0-100:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-0-100:00, irq=IGNORE)
[    3.611712] Adding 262140k swap on /dev/zram0.  Priority:100 extents:1 across:262140k SSFS
[    3.721197] r8169 0000:01:00.0 enp1s0: Link is Down
[    3.745244] ath10k_pci 0000:02:00.0: firmware: failed to load ath10k/pre-cal-pci-0000:02:00.0.bin (-2)
[    3.745253] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware
[    3.745273] ath10k_pci 0000:02:00.0: firmware: failed to load ath10k/cal-pci-0000:02:00.0.bin (-2)
[    3.746575] ath10k_pci 0000:02:00.0: firmware: direct-loading firmware ath10k/QCA9377/hw1.0/firmware-6.bin
[    3.746588] ath10k_pci 0000:02:00.0: qca9377 hw1.1 target 0x05020001 chip_id 0x003821ff sub 11ad:08a6
[    3.746593] ath10k_pci 0000:02:00.0: kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0
[    3.747767] ath10k_pci 0000:02:00.0: firmware ver WLAN.TF.2.1-00021-QCARMSWP-1 api 6 features wowlan,ignore-otp crc32 42e41877
[    3.802321] mc: Linux media interface: v0.10
[    3.809453] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[    3.811457] ath10k_pci 0000:02:00.0: firmware: direct-loading firmware ath10k/QCA9377/hw1.0/board-2.bin
[    3.811753] ath10k_pci 0000:02:00.0: board_file api 2 bmi_id N/A crc32 8aedfa4a
[    3.814877] videodev: Linux video capture interface: v2.00
[    3.906295] ath10k_pci 0000:02:00.0: htt-ver 3.56 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
[    3.945494] uvcvideo: Found UVC 1.00 device VGA WebCam (04f2:b5e0)
[    3.948377] input: VGA WebCam: VGA WebCam as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/input/input14
[    3.948501] usbcore: registered new interface driver uvcvideo
[    3.948506] USB Video Class driver (1.1.1)
[    3.969234] intel_rapl_common: Found RAPL domain package
[    3.969246] intel_rapl_common: Found RAPL domain core
[    3.969251] intel_rapl_common: Found RAPL domain uncore
[    3.971059] Bluetooth: Core ver 2.22
[    3.971100] NET: Registered protocol family 31
[    3.971105] Bluetooth: HCI device and connection manager initialized
[    3.971113] Bluetooth: HCI socket layer initialized
[    3.971119] Bluetooth: L2CAP socket layer initialized
[    3.971128] Bluetooth: SCO socket layer initialized
[    3.982792] usbcore: registered new interface driver btusb
[    3.997347] bluetooth hci0: firmware: direct-loading firmware qca/rampatch_usb_00000302.bin
[    3.997358] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[    3.997362] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[    3.999404] ath: EEPROM regdomain: 0x69
[    3.999405] ath: EEPROM indicates we should expect a direct regpair map
[    3.999407] ath: Country alpha2 being used: 00
[    3.999408] ath: Regpair used: 0x69
[    4.085064] bluetooth hci0: firmware: direct-loading firmware qca/nvm_usb_00000302.bin
[    4.085078] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[    4.436934] wlan0: authenticate with d0:16:b4:06:52:9b
[    4.479035] [drm] Initialized i915 1.6.0 20200917 for 0000:00:02.0 on minor 0
[    4.482832] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    4.483184] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input15
[    4.483510] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    4.484440] fbcon: i915drmfb (fb0) is primary device
[    4.494922] Console: switching to colour frame buffer device 240x67
[    4.517778] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[    4.532139] wlan0: send auth to d0:16:b4:06:52:9b (try 1/3)
[    4.533896] wlan0: authenticated
[    4.536749] wlan0: associate with d0:16:b4:06:52:9b (try 1/3)
[    4.540788] wlan0: RX AssocResp from d0:16:b4:06:52:9b (capab=0x1411 status=0 aid=2)
[    4.543192] wlan0: associated
[    4.672789] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[    4.705737] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC255: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    4.705800] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    4.705837] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    4.705871] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    4.705900] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    4.705940] snd_hda_codec_realtek hdaudioC0D0:      Headset Mic=0x19
[    4.705983] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[    4.772374] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[    4.772474] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
[    4.772543] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
[    4.772621] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
[    4.772677] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
[    4.773046] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21
[    4.773182] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input22
[    4.773297] input: HDA Intel PCH HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input23
[    4.773433] input: HDA Intel PCH HDMI/DP,pcm=12 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input24



.xsession-errors

Xsession: X session started for tzf at mer. 12 janv. 2022 07:21:56 CET
WARNING: tempfile is deprecated; consider using mktemp instead.
dbus-update-activation-environment: setting DBUS_SESSION_BUS_ADDRESS=unix:path=/run/user/1000/bus
dbus-update-activation-environment: setting DISPLAY=:0
dbus-update-activation-environment: setting XAUTHORITY=/home/tzf/.Xauthority
localuser:tzf being added to access control list
dbus-update-activation-environment: setting QT_ACCESSIBILITY=1
dbus-update-activation-environment: setting USER=tzf
dbus-update-activation-environment: setting XDG_SESSION_TYPE=x11
dbus-update-activation-environment: setting HOME=/home/tzf
dbus-update-activation-environment: setting DESKTOP_SESSION=lightdm-xsession
dbus-update-activation-environment: setting XDG_SEAT_PATH=/org/freedesktop/DisplayManager/Seat0
dbus-update-activation-environment: setting DBUS_SESSION_BUS_ADDRESS=unix:path=/run/user/1000/bus
dbus-update-activation-environment: setting LOGNAME=tzf
dbus-update-activation-environment: setting XDG_SESSION_CLASS=user
dbus-update-activation-environment: setting PATH=/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games
dbus-update-activation-environment: setting GDM_LANG=fr_FR.utf8
dbus-update-activation-environment: setting XDG_SESSION_PATH=/org/freedesktop/DisplayManager/Session0
dbus-update-activation-environment: setting XDG_RUNTIME_DIR=/run/user/1000
dbus-update-activation-environment: setting DISPLAY=:0
dbus-update-activation-environment: setting LANG=fr_FR.UTF-8
dbus-update-activation-environment: setting XDG_SESSION_DESKTOP=lightdm-xsession
dbus-update-activation-environment: setting XAUTHORITY=/home/tzf/.Xauthority
dbus-update-activation-environment: setting XDG_GREETER_DATA_DIR=/var/lib/lightdm/data/tzf
dbus-update-activation-environment: setting SHELL=/bin/bash
dbus-update-activation-environment: setting GDMSESSION=lightdm-xsession
dbus-update-activation-environment: setting QT_ACCESSIBILITY=1
dbus-update-activation-environment: setting GPG_AGENT_INFO=/run/user/1000/gnupg/S.gpg-agent:0:1
dbus-update-activation-environment: setting PWD=/home/tzf

Hello! I'll be your friendly XDG Autostarter today.
Here's what's on the menu:

 Appetizers

 * $XDG_CONFIG_HOME:      
 * $XDG_CONFIG_DIRS:      
 * $FBXDG_DE:            
 * $FBXDG_EXEC:          

 Entrées

 * Desktop Environment:    FLUXBOX
 * Global XDG Directory:  /etc/xdg
 * Local XDG Directory:   ~/.config
 * Current exec Model:    0

 - Chef Tagliamonte
       & The Fluxbox Crew

Now Serving: User folders update
  Hidden:  
     +-> (To be clear, I'm going to continue parsing)
Now Serving: AT-SPI D-Bus Bus
  Hidden:  
     +-> (To be clear, I'm going to continue parsing)
Now Serving: Power Manager
  Hidden:  
     +-> (To be clear, I'm going to continue parsing)
Now Serving: User folders update
  Hidden:  
     +-> (To be clear, I'm going to continue parsing)
Now Serving: Secret Storage Service
  Attrinf:  We're not in the OnlyShowIn. We must not execute.
  Attrinf:  GNOME;Unity;MATE;
  Hidden:  true
     +-> (To be clear, I'm stopping here)
Now Serving: gnome-disk-utility notification plugin for GNOME Settings Daemon
  Attrinf:  We're not in the OnlyShowIn. We must not execute.
  Attrinf:  GNOME;
  Hidden:  true
     +-> (To be clear, I'm stopping here)
Now Serving: Certificate and Key Storage
  Attrinf:  We're not in the OnlyShowIn. We must not execute.
  Attrinf:  GNOME;Unity;MATE;
  Hidden:  true
     +-> (To be clear, I'm stopping here)
Now Serving: PolicyKit Authentication Agent
  Attrinf:  We're not in the OnlyShowIn. We must not execute.
  Attrinf:  XFCE;Unity;X-Cinnamon;
  Hidden:  true
     +-> (To be clear, I'm stopping here)
Now Serving: SSH Key Agent
  Attrinf:  We're not in the OnlyShowIn. We must not execute.
  Attrinf:  GNOME;Unity;MATE;
  Hidden:  true
     +-> (To be clear, I'm stopping here)
Now Serving: PulseAudio Sound System
  Hidden:  
     +-> (To be clear, I'm going to continue parsing)
Now Serving: nakedSpace
  Hidden:  false
     +-> (To be clear, I'm going to continue parsing)

Finished parsing all files.

  Handling stub for: at-spi-dbus-bus.desktop
  Handling stub for: gnome-keyring-pkcs11.desktop
  Handling stub for: gnome-keyring-secrets.desktop
  Handling stub for: gnome-keyring-ssh.desktop
  Handling stub for: nakedspace.desktop
  Handling stub for: org.gnome.SettingsDaemon.DiskUtilityNotify.desktop
  Handling stub for: polkit-gnome-authentication-agent-1.desktop
  Handling stub for: pulseaudio.desktop
  Handling stub for: user-dirs-update-gtk.desktop
  Handling stub for: xdg-user-dirs.desktop
  Handling stub for: xfce4-power-manager.desktop
Raccourcis d'application inconnu = dimension

** (xfce4-power-manager:1280): WARNING **: 07:21:56.598: Failed to get name owner: GDBus.Error:org.freedesktop.DBus.Error.NameHasNoOwner: Could not get owner of name 'org.freedesktop.PowerManagement': no such name


** (xfce4-power-manager:1280): WARNING **: 07:21:56.598: Failed to get name owner: GDBus.Error:org.freedesktop.DBus.Error.NameHasNoOwner: Could not get owner of name 'org.xfce.PowerManager': no such name


(xfce4-power-manager:1280): xfce4-power-manager-WARNING **: 07:21:56.599: Unable to connect to session manager : Impossible de se connecter au gestionnaire de session : SESSION_MANAGER environment variable not defined
dbus-daemon[1313]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=1000 pid=1283 comm="/usr/lib/policykit-1-gnome/polkit-gnome-authentica")
dbus-daemon[1313]: Successfully activated service 'org.a11y.atspi.Registry'
SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry

(xfce4-power-manager:1280): GLib-GObject-WARNING **: 07:21:56.732: ../../../gobject/gsignal.c:2614: signal 'Changed' is invalid for instance '0x56280b2f7870' of type 'GDBusProxy'

(xfce4-power-manager:1280): xfce4-power-manager-WARNING **: 07:21:56.787: could not map keysym 1008ffa8 to keycode


** (xfce4-power-manager:1280): WARNING **: 07:21:56.800: No outputs have backlight property
xfce4-power-manager-Message: 07:21:56.825: Set kernel brightness switch to 0

(xfce4-power-manager:1280): xfce4-power-manager-WARNING **: 07:21:56.829: Failed to get keyboard max brightness level : GDBus.Error:org.freedesktop.DBus.Error.UnknownMethod: No such interface “org.freedesktop.UPower.KbdBacklight” on object at path /org/freedesktop/UPower/KbdBacklight
rm: impossible de supprimer '/home/tzf/.fluxbox/automenu/*': Aucun fichier ou dossier de ce type
find: ‘/usr/local/share/applications’: Aucun fichier ou dossier de ce type
vim.desktop
arandr.desktop
org.pwmt.zathura-pdf-poppler.desktop
ranger.desktop
org.gnome.FileRoller.desktop
conky.desktop
htop.desktop
display-im6.q16.desktop
torbrowser-settings.desktop
rxvt-unicode.desktop
screentemp.desktop
nakedwalls.desktop
gnome-disk-image-mounter.desktop
xfce4-power-manager-settings.desktop
connman-gtk.desktop
sxiv.desktop
i3.desktop
torbrowser.desktop
eyecandy.desktop
gnome-disk-image-writer.desktop
nakedbrowser.desktop
debian-uxterm.desktop
pavucontrol.desktop
nakedlocate.desktop
picom.desktop
org.gnome.DiskUtility.desktop
pacman.desktop
lightdm-gtk-greeter-settings.desktop
notification-daemon.desktop
mpv.desktop
org.pwmt.zathura.desktop
org.keepassxc.KeePassXC.desktop
pcmanfm-desktop-pref.desktop
bashmount.desktop
firefox-esr.desktop
nakedconky.desktop
veracrypt.desktop
lxappearance.desktop
lftp.desktop
geany.desktop
flobopuyo.desktop
debian-xterm.desktop
dotcleaner.desktop
gcr-viewer.desktop
pcmanfm.desktop
gparted.desktop
nakedquit.desktop
feh.desktop
python3.9.desktop
nakedhelp.desktop
gcr-prompter.desktop
menu generated
add the following line to your ~/.fluxbox/menu file :
[include] (~/.fluxbox/automenu/auto.menu)
conky: desktop window (7a3) is root window
conky: window type - override
conky: drawing to created window (0x1600002)
conky: drawing to double buffer
conky: forked to background, pid is 2152

** Message: 07:22:14.376: x-terminal-emulator has very limited support, consider choosing another terminal

(pcmanfm:2175): Gdk-WARNING **: 07:22:14.451: gdk_window_set_icon_list: icons too large
mpv --player-operation-mode=pseudo-gui -- 'file:///home/tzf/Vid%C3%A9os/La_Tech_avec_Bertrand/Les_bases_de_l-informatique/Les%20BASES%20de%20Linux%20%20-%20tuto%20d%C3%A9butant%20en%20fran%C3%A7ais%20%5B%20pr%C3%A9sentation%20avec%20Ubuntu%20%5D%20%5BdCL3IwQaNN8%5D.webm'
mpv --player-operation-mode=pseudo-gui -- 'file:///home/tzf/Vid%C3%A9os/La_Tech_avec_Bertrand/Les_bases_de_l-informatique/%5Btuto%20fr%5D%20le%20Terminal%20sur%20Linux%20et%20Mac%20OS%20X%20%20-%20comment%20utiliser%20la%20ligne%20de%20commande%20(console)%20%5BwFugsuE7s3Y%5D.webm'
mpv --player-operation-mode=pseudo-gui -- 'file:///home/tzf/Vid%C3%A9os/La_Tech_avec_Bertrand/Graphisme/%5B%20TUTO%20%5D%20Blender%20%20-%20les%20BASES%20!%20Tutoriel%20pour%20d%C3%A9butant%20en%203D%20sur%20Blender%20%5BN0fA3X2nDWk%5D.webm'
mpv --player-operation-mode=pseudo-gui -- 'file:///home/tzf/Vid%C3%A9os/La_Tech_avec_Bertrand/Graphisme/%5B%20TUTO%20MATERIEL%20%5D%20Tablette%20graphique%20%20-%20comment%20l'\''utiliser%20%20(photoshop,%20powerpoint,%20word)%20_%20D%C3%A9butant%20%5BrRjvlvuAHfI%5D.webm'
conky: received SIGHUP, SIGINT, or SIGTERM to terminate. bye!
X connection to :0 broken (explicit kill or server shutdown).
conky: X Error: Display 562d7813aef0

Xsession: X session started for tzf at jeu. 13 janv. 2022 06:47:59 CET
WARNING: tempfile is deprecated; consider using mktemp instead.
dbus-update-activation-environment: setting DBUS_SESSION_BUS_ADDRESS=unix:path=/run/user/1000/bus
dbus-update-activation-environment: setting DISPLAY=:0
dbus-update-activation-environment: setting XAUTHORITY=/home/tzf/.Xauthority
localuser:tzf being added to access control list
dbus-update-activation-environment: setting QT_ACCESSIBILITY=1
dbus-update-activation-environment: setting MAIL=/var/mail/tzf
dbus-update-activation-environment: setting USER=tzf
dbus-update-activation-environment: setting XDG_SESSION_TYPE=tty
dbus-update-activation-environment: setting SHLVL=1
dbus-update-activation-environment: setting BROWSER=w3m
dbus-update-activation-environment: setting MOTD_SHOWN=pam
dbus-update-activation-environment: setting HOME=/home/tzf
dbus-update-activation-environment: setting HUSHLOGIN=FALSE
dbus-update-activation-environment: setting PAGER=most
dbus-update-activation-environment: setting ENV=/home/tzf/.bashrc
dbus-update-activation-environment: setting DBUS_SESSION_BUS_ADDRESS=unix:path=/run/user/1000/bus
dbus-update-activation-environment: setting LOGNAME=tzf
dbus-update-activation-environment: setting JOURNAL_STREAM=8:20515
dbus-update-activation-environment: setting _=/bin/startx
dbus-update-activation-environment: setting XDG_SESSION_CLASS=user
dbus-update-activation-environment: setting TERM=linux
dbus-update-activation-environment: setting WINDOWPATH=1
dbus-update-activation-environment: setting PATH=/home/tzf/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin:/usr/games
dbus-update-activation-environment: setting INVOCATION_ID=c2ef021ee9b24c19b279f0eef35621bd
dbus-update-activation-environment: setting XDG_RUNTIME_DIR=/run/user/1000
dbus-update-activation-environment: setting DISPLAY=:0
dbus-update-activation-environment: setting LANG=fr_FR.UTF-8
dbus-update-activation-environment: setting LS_COLORS=no=00:rs=0:fi=00:di=01;34:ln=36:mh=04;36:pi=04;01;36:so=04;33:do=04;01;36:bd=01;33:cd=33:or=31:mi=01;37;41:ex=01;36:su=01;04;37:sg=01;04;37:ca=01;37:tw=01;37;44:ow=01;04;34:st=04;37;44:*.7z=01;32:*.ace=01;32:*.alz=01;32:*.arc=01;32:*.arj=01;32:*.bz=01;32:*.bz2=01;32:*.cab=01;32:*.cpio=01;32:*.deb=01;32:*.dz=01;32:*.ear=01;32:*.gz=01;32:*.jar=01;32:*.lha=01;32:*.lrz=01;32:*.lz=01;32:*.lz4=01;32:*.lzh=01;32:*.lzma=01;32:*.lzo=01;32:*.rar=01;32:*.rpm=01;32:*.rz=01;32:*.sar=01;32:*.t7z=01;32:*.tar=01;32:*.taz=01;32:*.tbz=01;32:*.tbz2=01;32:*.tgz=01;32:*.tlz=01;32:*.txz=01;32:*.tz=01;32:*.tzo=01;32:*.tzst=01;32:*.war=01;32:*.xz=01;32:*.z=01;32:*.Z=01;32:*.zip=01;32:*.zoo=01;32:*.zst=01;32:*.aac=32:*.au=32:*.flac=32:*.m4a=32:*.mid=32:*.midi=32:*.mka=32:*.mp3=32:*.mpa=32:*.mpeg=32:*.mpg=32:*.ogg=32:*.opus=32:*.ra=32:*.wav=32:*.3des=01;35:*.aes=01;35:*.gpg=01;35:*.pgp=01;35:*.doc=32:*.docx=32:*.dot=32:*.odg=32:*.odp=32:*.ods=32:*.odt=32:*.otg=32:*.otp=32:*.ots=32:*.ott=32:*.pdf=32:*.ppt=32:*.pptx=32:*.xls=32:*.xlsx=32:*.app=01;36:*.bat=01;36:*.btm=01;36:*.cmd=01;36:*.com=01;36:*.exe=01;36:*.reg=01;36:*~=02;37:*.bak=02;37:*.BAK=02;37:*.log=02;37:*.log=02;37:*.old=02;37:*.OLD=02;37:*.orig=02;37:*.ORIG=02;37:*.swo=02;37:*.swp=02;37:*.bmp=32:*.cgm=32:*.dl=32:*.dvi=32:*.emf=32:*.eps=32:*.gif=32:*.jpeg=32:*.jpg=32:*.JPG=32:*.mng=32:*.pbm=32:*.pcx=32:*.pgm=32:*.png=32:*.PNG=32:*.ppm=32:*.pps=32:*.ppsx=32:*.ps=32:*.svg=32:*.svgz=32:*.tga=32:*.tif=32:*.tiff=32:*.xbm=32:*.xcf=32:*.xpm=32:*.xwd=32:*.xwd=32:*.yuv=32:*.anx=32:*.asf=32:*.avi=32:*.axv=32:*.flc=32:*.fli=32:*.flv=32:*.gl=32:*.m2v=32:*.m4v=32:*.mkv=32:*.mov=32:*.MOV=32:*.mp4=32:*.mpeg=32:*.mpg=32:*.nuv=32:*.ogm=32:*.ogv=32:*.ogx=32:*.qt=32:*.rm=32:*.rmvb=32:*.swf=32:*.vob=32:*.webm=32:*.wmv=32:
dbus-update-activation-environment: setting XAUTHORITY=/home/tzf/.Xauthority
dbus-update-activation-environment: setting SHELL=/bin/bash
dbus-update-activation-environment: setting QT_ACCESSIBILITY=1
dbus-update-activation-environment: setting GPG_AGENT_INFO=/run/user/1000/gnupg/S.gpg-agent:0:1
dbus-update-activation-environment: setting PWD=/home/tzf
dbus-update-activation-environment: setting EDITOR=nano

Hello! I'll be your friendly XDG Autostarter today.
Here's what's on the menu:

 Appetizers

 * $XDG_CONFIG_HOME:      
 * $XDG_CONFIG_DIRS:      
 * $FBXDG_DE:            
 * $FBXDG_EXEC:          

 Entrées

 * Desktop Environment:    FLUXBOX
 * Global XDG Directory:  /etc/xdg
 * Local XDG Directory:   ~/.config
 * Current exec Model:    0

 - Chef Tagliamonte
       & The Fluxbox Crew

Now Serving: User folders update
  Hidden:  
     +-> (To be clear, I'm going to continue parsing)
Now Serving: AT-SPI D-Bus Bus
  Hidden:  
     +-> (To be clear, I'm going to continue parsing)
Now Serving: Power Manager
  Hidden:  
     +-> (To be clear, I'm going to continue parsing)
Now Serving: User folders update
  Hidden:  
     +-> (To be clear, I'm going to continue parsing)
Now Serving: Secret Storage Service
  Attrinf:  We're not in the OnlyShowIn. We must not execute.
  Attrinf:  GNOME;Unity;MATE;
  Hidden:  true
     +-> (To be clear, I'm stopping here)
Now Serving: gnome-disk-utility notification plugin for GNOME Settings Daemon
  Attrinf:  We're not in the OnlyShowIn. We must not execute.
  Attrinf:  GNOME;
  Hidden:  true
     +-> (To be clear, I'm stopping here)
Now Serving: Certificate and Key Storage
  Attrinf:  We're not in the OnlyShowIn. We must not execute.
  Attrinf:  GNOME;Unity;MATE;
  Hidden:  true
     +-> (To be clear, I'm stopping here)
Now Serving: PolicyKit Authentication Agent
  Attrinf:  We're not in the OnlyShowIn. We must not execute.
  Attrinf:  XFCE;Unity;X-Cinnamon;
  Hidden:  true
     +-> (To be clear, I'm stopping here)
Now Serving: SSH Key Agent
  Attrinf:  We're not in the OnlyShowIn. We must not execute.
  Attrinf:  GNOME;Unity;MATE;
  Hidden:  true
     +-> (To be clear, I'm stopping here)
Now Serving: PulseAudio Sound System
  Hidden:  
     +-> (To be clear, I'm going to continue parsing)
Now Serving: nakedSpace
  Hidden:  false
     +-> (To be clear, I'm going to continue parsing)

Finished parsing all files.

  Handling stub for: at-spi-dbus-bus.desktop
  Handling stub for: gnome-keyring-pkcs11.desktop
  Handling stub for: gnome-keyring-secrets.desktop
  Handling stub for: gnome-keyring-ssh.desktop
  Handling stub for: nakedspace.desktop
  Handling stub for: org.gnome.SettingsDaemon.DiskUtilityNotify.desktop
  Handling stub for: polkit-gnome-authentication-agent-1.desktop
  Handling stub for: pulseaudio.desktop
  Handling stub for: user-dirs-update-gtk.desktop
  Handling stub for: xdg-user-dirs.desktop
  Handling stub for: xfce4-power-manager.desktop
Raccourcis d'application inconnu = dimension

** (xfce4-power-manager:1252): WARNING **: 06:47:59.675: Failed to get name owner: GDBus.Error:org.freedesktop.DBus.Error.NameHasNoOwner: Could not get owner of name 'org.freedesktop.PowerManagement': no such name


** (xfce4-power-manager:1252): WARNING **: 06:47:59.675: Failed to get name owner: GDBus.Error:org.freedesktop.DBus.Error.NameHasNoOwner: Could not get owner of name 'org.xfce.PowerManager': no such name


(xfce4-power-manager:1252): xfce4-power-manager-WARNING **: 06:47:59.676: Unable to connect to session manager : Impossible de se connecter au gestionnaire de session : SESSION_MANAGER environment variable not defined
dbus-daemon[1289]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=1000 pid=1257 comm="/usr/lib/policykit-1-gnome/polkit-gnome-authentica")
dbus-daemon[1289]: Successfully activated service 'org.a11y.atspi.Registry'
SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry

(xfce4-power-manager:1252): GLib-GObject-WARNING **: 06:47:59.813: ../../../gobject/gsignal.c:2614: signal 'Changed' is invalid for instance '0x5558aa88a070' of type 'GDBusProxy'

(xfce4-power-manager:1252): xfce4-power-manager-WARNING **: 06:47:59.906: could not map keysym 1008ffa8 to keycode


** (xfce4-power-manager:1252): WARNING **: 06:47:59.920: No outputs have backlight property

(xfce4-power-manager:1252): xfce4-power-manager-WARNING **: 06:47:59.927: It seems the kernel brightness switch handling value was not restored properly on exit last time, xfce4-power-manager will try to restore it this time.
xfce4-power-manager-Message: 06:47:59.956: Set kernel brightness switch to 0

(xfce4-power-manager:1252): xfce4-power-manager-WARNING **: 06:47:59.963: Failed to get keyboard max brightness level : GDBus.Error:org.freedesktop.DBus.Error.UnknownMethod: No such interface “org.freedesktop.UPower.KbdBacklight” on object at path /org/freedesktop/UPower/KbdBacklight
rm: impossible de supprimer '/home/tzf/.fluxbox/automenu/*': Aucun fichier ou dossier de ce type
find: ‘/usr/local/share/applications’: Aucun fichier ou dossier de ce type
vim.desktop
arandr.desktop
org.pwmt.zathura-pdf-poppler.desktop
ranger.desktop
org.gnome.FileRoller.desktop
conky.desktop
htop.desktop
display-im6.q16.desktop
torbrowser-settings.desktop
rxvt-unicode.desktop
screentemp.desktop
nakedwalls.desktop
gnome-disk-image-mounter.desktop
xfce4-power-manager-settings.desktop
connman-gtk.desktop
sxiv.desktop
i3.desktop
torbrowser.desktop
eyecandy.desktop
gnome-disk-image-writer.desktop
nakedbrowser.desktop
debian-uxterm.desktop
pavucontrol.desktop
nakedlocate.desktop
picom.desktop
org.gnome.DiskUtility.desktop
pacman.desktop
lightdm-gtk-greeter-settings.desktop
notification-daemon.desktop
mpv.desktop
org.pwmt.zathura.desktop
org.keepassxc.KeePassXC.desktop
pcmanfm-desktop-pref.desktop
bashmount.desktop
firefox-esr.desktop
nakedconky.desktop
veracrypt.desktop
lxappearance.desktop
lftp.desktop
geany.desktop
flobopuyo.desktop
debian-xterm.desktop
dotcleaner.desktop
gcr-viewer.desktop
pcmanfm.desktop
gparted.desktop
nakedquit.desktop
feh.desktop
python3.9.desktop
nakedhelp.desktop
gcr-prompter.desktop
menu generated
add the following line to your ~/.fluxbox/menu file :
[include] (~/.fluxbox/automenu/auto.menu)
conky: desktop window (7a3) is root window
conky: window type - override
conky: drawing to created window (0x1a00002)
conky: drawing to double buffer
conky: forked to background, pid is 2141

** Message: 07:08:32.592: x-terminal-emulator has very limited support, consider choosing another terminal

(pcmanfm:2800): Gdk-WARNING **: 07:08:32.683: gdk_window_set_icon_list: icons too large
geany '/home/tzf/.xsession-errors'
 



raleur

Je ne connais pas. Ce serait plus clair si tu montrais le contenu de /proc/cmdline.

C'est basé sur systemd ou sysvinit ?


BOOT_IMAGE=/boot/vmlinuz-5.10.0-10-amd64 root=UUID=3689a581-4108-4bf8-975b-dc3bd58ede22 ro
 



nakeDeb est une simple Debian et donc c'est probablement systemD.

 $ pidof systemd && echo "systemd" || echo "other"
1118
systemd



robert2a



 $ sudo journalctl -b -r -p err
-- Journal begins at Mon 2021-12-20 18:51:23 CET, ends at Thu 2022-01-13 07:36:21 CET. --
janv. 13 06:47:25 belem systemd[1]: Failed to start Light Display Manager.
janv. 13 06:47:24 belem systemd-udevd[363]: wlan0: Failed to rename network interface 3 from 'wlan0' to 'wlp2s0': Device or resource busy
janv. 13 06:47:24 belem kernel: ath10k_pci 0000:02:00.0: firmware: failed to load ath10k/cal-pci-0000:02:00.0.bin (-2)
janv. 13 06:47:24 belem kernel: firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware
janv. 13 06:47:24 belem kernel: ath10k_pci 0000:02:00.0: firmware: failed to load ath10k/pre-cal-pci-0000:02:00.0.bin (-2)
janv. 13 06:47:24 belem connmand[552]: __connman_inet_get_pnp_nameservers: Cannot read /proc/net/pnp Failed to open file “/proc/net/pnp”: No such file or directory
 



voilà je crois avoir fais le tour...


......###     #       #    #        #
..#            # #    #    #        #
.#   ###   #    # #    #        #
....###    #       #       ###   Linux

Hors ligne

#11 13-01-2022 11:51:13

robert2a
Membre
Distrib. : Buster 10 version 10.11
Noyau : kernel buster backports
(G)UI : Mate
Inscription : 15-11-2014

Re : HDA Intel PCH HDMI/DP

Bonjour
tu a un souci ici


janv. 13 06:47:25 belem systemd[1]: Failed to start Light Display Manager
 


le service lightdm


systemctl status lightdm.service
 



ps: tu a les commandes "status" , start" , "restart" et "stop"  disponible

et le firmware pour ath10k_pci (le wifi je suppose ) , que tu peu installer


janv. 13 06:47:24 belem kernel: ath10k_pci 0000:02:00.0: firmware: failed to load ath10k/cal-pci-0000:02:00.0.bin (-2)
 


tu peu vérifier si installé (ici version de bookworm)


apt policy firmware-atheros
firmware-atheros:
  Installé : (aucun)
  Candidat : 20210818-1
 Table de version :
     20210818-1 500
        500 https://deb.debian.org/debian bookworm/non-free amd64 Packages
 

Dernière modification par robert2a (13-01-2022 11:57:22)


Machines : kabylake I7 7700 , AMD 1700(X) ,AMD threadripper gen1 , AMD Raven R3 2200G , AMD FX(tm)-8320

Hors ligne

#12 14-01-2022 07:09:29

TyZef
Membre
Distrib. : dn sid
(G)UI : OpenBox
Inscription : 09-05-2013

Re : HDA Intel PCH HDMI/DP

Bonjour robert2a,

merci pour ton attention,


 $ sudo systemctl status lightdm.service
[sudo] Mot de passe de tzf :
● lightdm.service - Light Display Manager
     Loaded: loaded (/lib/systemd/system/lightdm.service; enabled; vendor prese>
     Active: active (running) since Fri 2022-01-14 05:46:11 CET; 11min ago
       Docs: man:lightdm(1)
   Main PID: 924 (lightdm)
      Tasks: 13 (limit: 9236)
     Memory: 165.1M
        CPU: 15.382s
     CGroup: /system.slice/lightdm.service
             ├─924 /usr/sbin/lightdm
             └─945 /usr/lib/xorg/Xorg :0 -seat seat0 -auth /var/run/lightdm/roo>

janv. 14 05:46:11 belem systemd[1]: Starting Light Display Manager...
janv. 14 05:46:11 belem systemd[1]: Started Light Display Manager.
janv. 14 05:46:11 belem lightdm[1080]: pam_unix(lightdm-greeter:session): sessi>
janv. 14 05:46:24 belem lightdm[1165]: gkr-pam: unable to locate daemon control>
janv. 14 05:46:24 belem lightdm[1165]: gkr-pam: stashed password to try later i>
janv. 14 05:46:24 belem lightdm[1165]: pam_unix(lightdm:session): session opene>
janv. 14 05:46:24 belem lightdm[1165]: gkr-pam: gnome-keyring-daemon started pr>
lines 1-19/19 (END)...skipping...
● lightdm.service - Light Display Manager
     Loaded: loaded (/lib/systemd/system/lightdm.service; enabled; vendor preset: enabled)
     Active: active (running) since Fri 2022-01-14 05:46:11 CET; 11min ago
       Docs: man:lightdm(1)
   Main PID: 924 (lightdm)
      Tasks: 13 (limit: 9236)
     Memory: 165.1M
        CPU: 15.382s
     CGroup: /system.slice/lightdm.service
             ├─924 /usr/sbin/lightdm
             └─945 /usr/lib/xorg/Xorg :0 -seat seat0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch

janv. 14 05:46:11 belem systemd[1]: Starting Light Display Manager...
janv. 14 05:46:11 belem systemd[1]: Started Light Display Manager.
janv. 14 05:46:11 belem lightdm[1080]: pam_unix(lightdm-greeter:session): session opened for user lightdm(uid=107) by (uid=0)
janv. 14 05:46:24 belem lightdm[1165]: gkr-pam: unable to locate daemon control file
janv. 14 05:46:24 belem lightdm[1165]: gkr-pam: stashed password to try later in open session
janv. 14 05:46:24 belem lightdm[1165]: pam_unix(lightdm:session): session opened for user tzf(uid=1000) by (uid=0)
janv. 14 05:46:24 belem lightdm[1165]: gkr-pam: gnome-keyring-daemon started properly and unlocked keyring


''janv. 14 05:46:24 belem lightdm[1165]: gkr-pam: unable to locate daemon control file'' est en rouge...

puis :

 $ apt policy firmware-atheros
firmware-atheros:
  Installé : 20210315-3
  Candidat : 20210315-3
 Table de version :
 *** 20210315-3 500
        500 http://deb.debian.org/debian bullseye/non-free amd64 Packages
        100 /var/lib/dpkg/status
 

Dernière modification par TyZef (14-01-2022 07:10:34)


......###     #       #    #        #
..#            # #    #    #        #
.#   ###   #    # #    #        #
....###    #       #       ###   Linux

Hors ligne

#13 14-01-2022 09:01:22

robert2a
Membre
Distrib. : Buster 10 version 10.11
Noyau : kernel buster backports
(G)UI : Mate
Inscription : 15-11-2014

Re : HDA Intel PCH HDMI/DP

Bonjour
pour lightdm le retour est correct  ( un souci de démarrage aléatoire ? )
pour le firmware peut être la version de bullseye qui n'est pas suffisante pour ce matériel ?
mettre le retour de lspci


lspci
 


quand cela bug si tu a pas la main (obliger de redémarrer la machine avec le bouton d'alimentation).
ça va être dur de trouver la cause
surveille les messages d'erreurs avec  "journalctl -b -r -p err"
la commande avec l'option "-b" donne uniquement les erreurs depuis le dernier démarrage
sans l'option "-b" donne le retour de tout le journal  (dans /var/log/journal).
ps: pour figer le système c'est sérieux mais aléatoire si j'ai bien compris . (pas a chaque démarrage ).
le retour de lsusb aussi


lsusb
 

Dernière modification par robert2a (14-01-2022 09:11:20)


Machines : kabylake I7 7700 , AMD 1700(X) ,AMD threadripper gen1 , AMD Raven R3 2200G , AMD FX(tm)-8320

Hors ligne

Pied de page des forums