Debian Debian-France Debian-Facile Debian-fr.org Debian-fr.xyz Debian ? Communautés

Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#51 29-03-2022 17:36:32

Debian Alain
Membre
Lieu : Bretagne
Distrib. : bookworm unstable sid / bullseye (stable)
Noyau : Linux sid 5.17.0-1-amd64
(G)UI : Gnome X.org (X11) / GDM3
Inscription : 11-03-2017
Site Web

Re : [abandonné] transferts de fichiers / impression impossibles

apt policy python3


python3:
  Installé : 3.10.4-1
  Candidat : 3.10.4-1
 Table de version :
 *** 3.10.4-1 500
        500 http://deb.debian.org/debian unstable/main amd64 Packages
        100 /var/lib/dpkg/status
     3.9.8-1 100
        100 http://deb.debian.org/debian testing/main amd64 Packages
 



sudo apt install --reinstall gnome


Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances... Fait
Lecture des informations d'état... Fait      
Certains paquets ne peuvent être installés. Ceci peut signifier
que vous avez demandé l'impossible, ou bien, si vous utilisez
la distribution unstable, que certains paquets n'ont pas encore
été créés ou ne sont pas sortis d'Incoming.
L'information suivante devrait vous aider à résoudre la situation :

Les paquets suivants contiennent des dépendances non satisfaites :
 python3-ldb : Dépend: python3 (< 3.10) mais 3.10.4-1 devra être installé
 rhythmbox-plugins : Dépend: python3 (< 3.10) mais 3.10.4-1 devra être installé
E: Impossible de corriger les problèmes, des paquets défectueux sont en mode « garder en l'état ».
 

Hors ligne

#52 29-03-2022 17:48:30

robert2a
Membre
Distrib. : Buster 10 version 10.11
Noyau : kernel buster backports
(G)UI : Mate
Inscription : 15-11-2014

Re : [abandonné] transferts de fichiers / impression impossibles

une simulation sur python3 depuis testing vers sid


apt -s --reinstall install python3
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances... Fait
Lecture des informations d'
état... Fait      
Les paquets suivants ont été installés automatiquement et ne sont plus nécessaires :
  gcc-11-base:i386 hplip-data libavahi-glib1 libimagequant0 libldb2 libopenaptx0 libraqm0 libsane-hpaio libsoup-3.0-0 libsoup-3.0-common libwbclient0 libxpresent1 linux-headers-5.16.0-1-common python3-pexpect
  python3-pil python3-ptyprocess python3-reportlab python3-reportlab-accel python3-talloc python3.9 python3.9-minimal
Veuillez utiliser « apt autoremove » pour les supprimer.
Les paquets supplémentaires suivants seront installés :
  libpython3-stdlib libpython3.10 libpython3.10-minimal libpython3.10-stdlib libreoffice libreoffice-base libreoffice-base-core libreoffice-base-drivers libreoffice-calc libreoffice-common libreoffice-core
  libreoffice-draw libreoffice-impress libreoffice-math libreoffice-writer libtalloc2 python3-minimal python3-talloc python3-uno python3.10 python3.10-minimal
Paquets suggérés :
  cups-bsd gpa imagemagick | graphicsmagick-imagemagick-compat libreoffice-gnome | libreoffice-plasma libreoffice-grammarcheck openclipart-libreoffice pstoedit unixodbc libofficebean-java
  libreoffice-report-builder libjtds-java libsqliteodbc | tdsodbc | odbc-mdbtools bluez libreoffice-java-common python3-doc python3-tk python3-venv python3.10-venv python3.10-doc
Paquets recommandés :
  libreoffice-nlpsolver libreoffice-report-builder libreoffice-script-provider-bsh libreoffice-script-provider-js libreoffice-wiki-publisher libreoffice-java-common libreoffice-sdbc-hsqldb
  libreoffice-sdbc-firebird
Les paquets suivants seront ENLEVÉS :
  gvfs-backends hplip libsmbclient mate-core mate-desktop-environment-core python3-ldb samba-libs vlc-plugin-samba
Les NOUVEAUX paquets suivants seront installés :
  libpython3.10 libpython3.10-minimal libpython3.10-stdlib python3.10 python3.10-minimal
Les paquets suivants seront mis à jour :
  libpython3-stdlib libreoffice libreoffice-base libreoffice-base-core libreoffice-base-drivers libreoffice-calc libreoffice-common libreoffice-core libreoffice-draw libreoffice-impress libreoffice-math
  libreoffice-writer libtalloc2 python3 python3-minimal python3-talloc python3-uno
17 mis à jour, 5 nouvellement installés, 8 à enlever et 113 non mis à jour.
 


Machines : kabylake I7 7700 , AMD 1700(X) ,AMD threadripper gen1 , AMD Raven R3 2200G , AMD FX(tm)-8320

Hors ligne

#53 29-03-2022 17:56:51

robert2a
Membre
Distrib. : Buster 10 version 10.11
Noyau : kernel buster backports
(G)UI : Mate
Inscription : 15-11-2014

Re : [abandonné] transferts de fichiers / impression impossibles

mise a jour de testing ce soir


Récupération des rapports de bogue… Fait
Analyse des informations Trouvé/Corrigé… Fait
bogues de gravité serious sur libpython3.10-stdlib (→ 3.10.4-1) <En attente de traitement>
 b1 - #999912 - libpython3.10-stdlib,python3-gdbm: both ship /usr/lib/python3.10/lib-dynload/_dbm.cpython-310-x86_64-linux-gnu.so
Résumé :
 libpython3.10-stdlib(1 bogue)
Êtes-vous certain(e) de vouloir installer/mettre à niveau les paquets ci-dessus ? [Y/n/?/...]
 


Machines : kabylake I7 7700 , AMD 1700(X) ,AMD threadripper gen1 , AMD Raven R3 2200G , AMD FX(tm)-8320

Hors ligne

#54 29-03-2022 17:59:51

Debian Alain
Membre
Lieu : Bretagne
Distrib. : bookworm unstable sid / bullseye (stable)
Noyau : Linux sid 5.17.0-1-amd64
(G)UI : Gnome X.org (X11) / GDM3
Inscription : 11-03-2017
Site Web

Re : [abandonné] transferts de fichiers / impression impossibles

j'ai dû installer python3-talloc en version testing

sudo aptitude install python3-talloc=2.3.3-2


Les NOUVEAUX paquets suivants vont être installés :    
  python3-talloc{b}
0 paquets mis à jour, 1 nouvellement installés, 0 à enlever et 3 non mis à jour.
Il est nécessaire de télécharger 17,1 ko d'archives. Après dépaquetage, 77,8 ko seront utilisés.
Les paquets suivants ont des dépendances non satisfaites :
 python3-talloc : Dépend: libtalloc2 (= 2.3.3-2) but 2.3.3-3+b1 is installed
Les actions suivantes permettront de résoudre ces dépendances :

     Conserver les paquets suivants dans leur version actuelle :
1)     python3-talloc [Non installé]                            



Accepter cette solution ? [Y/n/q/?] n
Les actions suivantes permettront de résoudre ces dépendances :

     Réinstaller à une version antérieure les paquets suivants :  
1)     libtalloc2 [2.3.3-3+b1 (now, unstable) -> 2.3.3-2 (testing)]



Accepter cette solution ? [Y/n/q/?] y
Les paquets suivants vont être RÉINSTALLÉS à une VERSION ANTÉRIEURE :
  libtalloc2
Les NOUVEAUX paquets suivants vont être installés :
  python3-talloc
0 paquets mis à jour, 1 nouvellement installés, 1 remis à une version antérieure, 0 à enlever et 3 non mis à jour.
Il est nécessaire de télécharger 45,8 ko d'archives. Après dépaquetage, 75,8 ko seront utilisés.
Voulez-vous continuer ? [Y/n/?]
Prendre :  1 http://deb.debian.org/debian testing/main amd64 libtalloc2 amd64 2.3.3-2 [28,7 kB]
Prendre :  2 http://deb.debian.org/debian testing/main amd64 python3-talloc amd64 2.3.3-2 [17,1 kB]
 45,8 ko téléchargés en 0s (433 ko/s)
Récupération des rapports de bogue… Fait
Analyse des informations Trouvé/Corrigé… Fait
dpkg: avertissement: dégradation (« downgrade ») de libtalloc2:amd64 depuis 2.3.3-3+b1 vers 2.3.3-2
(Lecture de la base de données... 490111 fichiers et répertoires déjà installés.)
Préparation du dépaquetage de .../libtalloc2_2.3.3-2_amd64.deb ...
Dépaquetage de libtalloc2:amd64 (2.3.3-2) sur (2.3.3-3+b1) ...
Sélection du paquet python3-talloc:amd64 précédemment désélectionné.
Préparation du dépaquetage de .../python3-talloc_2.3.3-2_amd64.deb ...
Dépaquetage de python3-talloc:amd64 (2.3.3-2) ...
Paramétrage de libtalloc2:amd64 (2.3.3-2) ...
Paramétrage de python3-talloc:amd64 (2.3.3-2) ...
Traitement des actions différées (« triggers ») pour libc-bin (2.33-7) ...
Scanning processes...                                                                                    
Scanning candidates...                                                                                    
Scanning processor microcode...                                                                          
Scanning linux images...                                                                                  

Running kernel seems to be up-to-date.

The processor microcode seems to be up-to-date.

Restarting services...
Service restarts being deferred:
 systemctl restart user@1000.service

No containers need to be restarted.

No user sessions are running outdated binaries.
                                                       
État actuel : 5 (+2) upgradable.
 



apt policy gnome gnome-core


gnome:
  Installé : (aucun)
  Candidat : 1:42+1
 Table de version :
     1:42+1 500
        100 http://deb.debian.org/debian testing/main amd64 Packages
        500 http://deb.debian.org/debian unstable/main amd64 Packages
gnome-core:
  Installé : (aucun)
  Candidat : 1:42+1
 Table de version :
     1:42+1 500
        100 http://deb.debian.org/debian testing/main amd64 Packages
        500 http://deb.debian.org/debian unstable/main amd64 Packages
 



sudo apt install --reinstall gnome


Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances... Fait
Lecture des informations d'état... Fait      
Les paquets supplémentaires suivants seront installés :
  gnome-control-center gnome-core gvfs-backends libsmbclient python3-ldb rhythmbox-plugins samba-libs
Paquets suggérés :
  empathy goobox | sound-juicer polari vinagre webext-ublock-origin firefox-esr-l10n-all
  | firefox-l10n-all libcanberra-gtk-module samba-common
Les NOUVEAUX paquets suivants seront installés :
  gnome gnome-control-center gnome-core gvfs-backends libsmbclient python3-ldb rhythmbox-plugins
  samba-libs
0 mis à jour, 8 nouvellement installés, 0 à enlever et 5 non mis à jour.
Il est nécessaire de prendre 7140 ko/9030 ko dans les archives.
Après cette opération, 35,5 Mo d'espace disque supplémentaires seront utilisés.
Souhaitez-vous continuer ? [O/n]
Réception de :1 http://deb.debian.org/debian testing/main amd64 samba-libs amd64 2:4.13.14+dfsg-1+b2 [5746 kB]
Réception de :2 http://deb.debian.org/debian testing/main amd64 libsmbclient amd64 2:4.13.14+dfsg-1+b2 [168 kB]
Réception de :3 http://deb.debian.org/debian testing/main amd64 gvfs-backends amd64 1.50.0-1 [380 kB]
Réception de :4 http://deb.debian.org/debian testing/main amd64 gnome-core amd64 1:42+1 [28,2 kB]
Réception de :5 http://deb.debian.org/debian testing/main amd64 rhythmbox-plugins amd64 3.4.4-5 [789 kB]
Réception de :6 http://deb.debian.org/debian testing/main amd64 gnome amd64 1:42+1 [28,0 kB]
7140 ko réceptionnés en 0s (22,6 Mo/s)
Récupération des rapports de bogue… Fait
Analyse des informations Trouvé/Corrigé… Fait
bogues de gravité grave sur gnome-control-center (→ 1:41.4-1) <Transférés>
 b1 - #913978 - is not accessible with Orca screenreader
Résumé :
 gnome-control-center(1 bogue)
Êtes-vous certain(e) de vouloir installer/mettre à niveau les paquets ci-dessus ? [Y/n/?/...]
Sélection du paquet python3-ldb précédemment désélectionné.
(Lecture de la base de données... 490117 fichiers et répertoires déjà installés.)
Préparation du dépaquetage de .../0-python3-ldb_2%3a2.2.3-2+b1_amd64.deb ...
Dépaquetage de python3-ldb (2:2.2.3-2+b1) ...
Sélection du paquet samba-libs:amd64 précédemment désélectionné.
Préparation du dépaquetage de .../1-samba-libs_2%3a4.13.14+dfsg-1+b2_amd64.deb ...
Dépaquetage de samba-libs:amd64 (2:4.13.14+dfsg-1+b2) ...
Sélection du paquet libsmbclient:amd64 précédemment désélectionné.
Préparation du dépaquetage de .../2-libsmbclient_2%3a4.13.14+dfsg-1+b2_amd64.deb ...
Dépaquetage de libsmbclient:amd64 (2:4.13.14+dfsg-1+b2) ...
Sélection du paquet gnome-control-center précédemment désélectionné.
Préparation du dépaquetage de .../3-gnome-control-center_1%3a41.4-1_amd64.deb ...
Dépaquetage de gnome-control-center (1:41.4-1) ...
Sélection du paquet gvfs-backends précédemment désélectionné.
Préparation du dépaquetage de .../4-gvfs-backends_1.50.0-1_amd64.deb ...
Dépaquetage de gvfs-backends (1.50.0-1) ...
Sélection du paquet gnome-core précédemment désélectionné.
Préparation du dépaquetage de .../5-gnome-core_1%3a42+1_amd64.deb ...
Dépaquetage de gnome-core (1:42+1) ...
Sélection du paquet rhythmbox-plugins précédemment désélectionné.
Préparation du dépaquetage de .../6-rhythmbox-plugins_3.4.4-5_amd64.deb ...
Dépaquetage de rhythmbox-plugins (3.4.4-5) ...
Sélection du paquet gnome précédemment désélectionné.
Préparation du dépaquetage de .../7-gnome_1%3a42+1_amd64.deb ...
Dépaquetage de gnome (1:42+1) ...
Paramétrage de rhythmbox-plugins (3.4.4-5) ...
Paramétrage de python3-ldb (2:2.2.3-2+b1) ...
Paramétrage de samba-libs:amd64 (2:4.13.14+dfsg-1+b2) ...
Paramétrage de libsmbclient:amd64 (2:4.13.14+dfsg-1+b2) ...
Paramétrage de gnome-control-center (1:41.4-1) ...
Paramétrage de gvfs-backends (1.50.0-1) ...
Traitement des actions différées (« triggers ») pour man-db (2.10.2-1) ...
Traitement des actions différées (« triggers ») pour mailcap (3.70+nmu1) ...
Traitement des actions différées (« triggers ») pour desktop-file-utils (0.26-1) ...
Traitement des actions différées (« triggers ») pour gnome-menus (3.36.0-1) ...
Traitement des actions différées (« triggers ») pour libglib2.0-0:i386 (2.72.0-1) ...
Traitement des actions différées (« triggers ») pour libglib2.0-0:amd64 (2.72.0-1) ...
Traitement des actions différées (« triggers ») pour libc-bin (2.33-7) ...
Paramétrage de gnome-core (1:42+1) ...
Paramétrage de gnome (1:42+1) ...
Scanning processes...                                                                                    
Scanning candidates...                                                                                    
Scanning processor microcode...                                                                          
Scanning linux images...                                                                                  

Running kernel seems to be up-to-date.

The processor microcode seems to be up-to-date.

Restarting services...
Service restarts being deferred:
 systemctl restart user@1000.service

No containers need to be restarted.

No user sessions are running outdated binaries.
 



sudo apt install --reinstall gnome-core


Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances... Fait
Lecture des informations d'état... Fait      
0 mis à jour, 0 nouvellement installés, 1 réinstallés, 0 à enlever et 5 non mis à jour.
Il est nécessaire de prendre 28,2 ko dans les archives.
Après cette opération, 0 o d'espace disque supplémentaires seront utilisés.
Réception de :1 http://deb.debian.org/debian testing/main amd64 gnome-core amd64 1:42+1 [28,2 kB]
28,2 ko réceptionnés en 0s (306 ko/s)  
(Lecture de la base de données... 490609 fichiers et répertoires déjà installés.)
Préparation du dépaquetage de .../gnome-core_1%3a42+1_amd64.deb ...
Dépaquetage de gnome-core (1:42+1) sur (1:42+1) ...
Paramétrage de gnome-core (1:42+1) ...
Scanning processes...                                                                                    
Scanning candidates...                                                                                    
Scanning processor microcode...                                                                          
Scanning linux images...                                                                                  

Running kernel seems to be up-to-date.

The processor microcode seems to be up-to-date.

Restarting services...
Service restarts being deferred:
 systemctl restart user@1000.service

No containers need to be restarted.

No user sessions are running outdated binaries.
 



apt policy gnome gnome-core


gnome:
  Installé : 1:42+1
  Candidat : 1:42+1
 Table de version :
 *** 1:42+1 500
        100 http://deb.debian.org/debian testing/main amd64 Packages
        500 http://deb.debian.org/debian unstable/main amd64 Packages
        100 /var/lib/dpkg/status
gnome-core:
  Installé : 1:42+1
  Candidat : 1:42+1
 Table de version :
 *** 1:42+1 500
        100 http://deb.debian.org/debian testing/main amd64 Packages
        500 http://deb.debian.org/debian unstable/main amd64 Packages
        100 /var/lib/dpkg/status
 



apt list --upgradable


libpython3-stdlib/unstable 3.10.4-1 amd64 [pouvant être mis à jour depuis : 3.9.8-1]
libtalloc2/unstable 2.3.3-3+b1 amd64 [pouvant être mis à jour depuis : 2.3.3-2]
python3-minimal/unstable 3.10.4-1 amd64 [pouvant être mis à jour depuis : 3.9.8-1]
python3-talloc/unstable 2.3.3-3+b1 amd64 [pouvant être mis à jour depuis : 2.3.3-2]
python3/unstable 3.10.4-1 amd64 [pouvant être mis à jour depuis : 3.9.8-1]
 

Dernière modification par Debian Alain (29-03-2022 18:05:47)

Hors ligne

#55 29-03-2022 18:20:42

Debian Alain
Membre
Lieu : Bretagne
Distrib. : bookworm unstable sid / bullseye (stable)
Noyau : Linux sid 5.17.0-1-amd64
(G)UI : Gnome X.org (X11) / GDM3
Inscription : 11-03-2017
Site Web

Re : [abandonné] transferts de fichiers / impression impossibles

sudo -s apt --reinstall install gnome gnome-core cups-filters cups-filters-core-drivers printer-driver-hpijs gnome-desktop3-data libavahi-client3 libavahi-common-data libavahi-common3


Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances... Fait
Lecture des informations d'état... Fait      
0 mis à jour, 0 nouvellement installés, 12 réinstallés, 0 à enlever et 5 non mis à jour.
Il est nécessaire de prendre 1352 ko/2170 ko dans les archives.
Après cette opération, 0 o d'espace disque supplémentaires seront utilisés.
Souhaitez-vous continuer ? [O/n]
Réception de :1 http://deb.debian.org/debian testing/main amd64 gnome amd64 1:42+1 [28,0 kB]
Réception de :2 http://deb.debian.org/debian testing/main amd64 gnome-core amd64 1:42+1 [28,2 kB]
Réception de :3 http://deb.debian.org/debian testing/main amd64 gnome-desktop3-data all 42.0-1 [430 kB]
Réception de :4 http://deb.debian.org/debian testing/main amd64 libavahi-client3 amd64 0.8-5 [62,1 kB]
Réception de :5 http://deb.debian.org/debian testing/main i386 libavahi-client3 i386 0.8-5 [64,3 kB]
Réception de :6 http://deb.debian.org/debian testing/main amd64 libavahi-common-data amd64 0.8-5 [124 kB]
Réception de :7 http://deb.debian.org/debian testing/main i386 libavahi-common-data i386 0.8-5 [123 kB]
Réception de :8 http://deb.debian.org/debian testing/main amd64 libavahi-common3 amd64 0.8-5 [58,4 kB]
Réception de :9 http://deb.debian.org/debian testing/main i386 libavahi-common3 i386 0.8-5 [60,1 kB]
Réception de :10 http://deb.debian.org/debian testing/main amd64 printer-driver-hpijs amd64 3.21.12+dfsg0-1 [374 kB]
1352 ko réceptionnés en 0s (8022 ko/s)        
(Lecture de la base de données... 490609 fichiers et répertoires déjà installés.)
Préparation du dépaquetage de .../00-cups-filters-core-drivers_1.28.12-1+b1_amd64.deb ...
Dépaquetage de cups-filters-core-drivers (1.28.12-1+b1) sur (1.28.12-1+b1) ...
Préparation du dépaquetage de .../01-cups-filters_1.28.12-1+b1_amd64.deb ...
Dépaquetage de cups-filters (1.28.12-1+b1) sur (1.28.12-1+b1) ...
Préparation du dépaquetage de .../02-gnome_1%3a42+1_amd64.deb ...
Dépaquetage de gnome (1:42+1) sur (1:42+1) ...
Préparation du dépaquetage de .../03-gnome-core_1%3a42+1_amd64.deb ...
Dépaquetage de gnome-core (1:42+1) sur (1:42+1) ...
Préparation du dépaquetage de .../04-gnome-desktop3-data_42.0-1_all.deb ...
Dépaquetage de gnome-desktop3-data (42.0-1) sur (42.0-1) ...
Préparation du dépaquetage de .../05-libavahi-client3_0.8-5_amd64.deb ...
Dépaquetage de libavahi-client3:amd64 (0.8-5) sur (0.8-5) ...
Préparation du dépaquetage de .../06-libavahi-client3_0.8-5_i386.deb ...
Dépaquetage de libavahi-client3:i386 (0.8-5) sur (0.8-5) ...
Préparation du dépaquetage de .../07-libavahi-common-data_0.8-5_amd64.deb ...
Dépaquetage de libavahi-common-data:amd64 (0.8-5) sur (0.8-5) ...
Préparation du dépaquetage de .../08-libavahi-common-data_0.8-5_i386.deb ...
Dépaquetage de libavahi-common-data:i386 (0.8-5) sur (0.8-5) ...
Préparation du dépaquetage de .../09-libavahi-common3_0.8-5_amd64.deb ...
Dépaquetage de libavahi-common3:amd64 (0.8-5) sur (0.8-5) ...
Préparation du dépaquetage de .../10-libavahi-common3_0.8-5_i386.deb ...
Dépaquetage de libavahi-common3:i386 (0.8-5) sur (0.8-5) ...
Préparation du dépaquetage de .../11-printer-driver-hpijs_3.21.12+dfsg0-1_amd64.deb ...
Dépaquetage de printer-driver-hpijs (3.21.12+dfsg0-1) sur (3.21.12+dfsg0-1) ...
Paramétrage de gnome-core (1:42+1) ...
Paramétrage de gnome (1:42+1) ...
Paramétrage de printer-driver-hpijs (3.21.12+dfsg0-1) ...
Paramétrage de cups-filters-core-drivers (1.28.12-1+b1) ...
Paramétrage de gnome-desktop3-data (42.0-1) ...
Paramétrage de libavahi-common-data:amd64 (0.8-5) ...
Paramétrage de libavahi-common-data:i386 (0.8-5) ...
Paramétrage de cups-filters (1.28.12-1+b1) ...
Paramétrage de libavahi-common3:amd64 (0.8-5) ...
Paramétrage de libavahi-common3:i386 (0.8-5) ...
Paramétrage de libavahi-client3:amd64 (0.8-5) ...
Paramétrage de libavahi-client3:i386 (0.8-5) ...
Traitement des actions différées (« triggers ») pour libc-bin (2.33-7) ...
Traitement des actions différées (« triggers ») pour man-db (2.10.2-1) ...
Traitement des actions différées (« triggers ») pour cups (2.4.1op1-2) ...
Scanning processes...                                                                                                                                                
Scanning candidates...                                                                                                                                                
Scanning processor microcode...                                                                                                                                      
Scanning linux images...                                                                                                                                              

Running kernel seems to be up-to-date.

The processor microcode seems to be up-to-date.

Restarting services...
 systemctl restart avahi-daemon.service cups-browsed.service cups.service
Service restarts being deferred:
 systemctl restart user@1000.service

No containers need to be restarted.

No user sessions are running outdated binaries.
 

Hors ligne

#56 29-03-2022 18:23:42

Debian Alain
Membre
Lieu : Bretagne
Distrib. : bookworm unstable sid / bullseye (stable)
Noyau : Linux sid 5.17.0-1-amd64
(G)UI : Gnome X.org (X11) / GDM3
Inscription : 11-03-2017
Site Web

Re : [abandonné] transferts de fichiers / impression impossibles

apt policy gnome gnome-core cups-filters cups-filters-core-drivers printer-driver-hpijs gnome-desktop3-data libavahi-client3 libavahi-common-data libavahi-common3


gnome:
  Installé : 1:42+1
  Candidat : 1:42+1
 Table de version :
 *** 1:42+1 500
        100 http://deb.debian.org/debian testing/main amd64 Packages
        500 http://deb.debian.org/debian unstable/main amd64 Packages
        100 /var/lib/dpkg/status
gnome-core:
  Installé : 1:42+1
  Candidat : 1:42+1
 Table de version :
 *** 1:42+1 500
        100 http://deb.debian.org/debian testing/main amd64 Packages
        500 http://deb.debian.org/debian unstable/main amd64 Packages
        100 /var/lib/dpkg/status
cups-filters:
  Installé : 1.28.12-1+b1
  Candidat : 1.28.12-1+b1
 Table de version :
 *** 1.28.12-1+b1 500
        100 http://deb.debian.org/debian testing/main amd64 Packages
        500 http://deb.debian.org/debian unstable/main amd64 Packages
        100 /var/lib/dpkg/status
cups-filters-core-drivers:
  Installé : 1.28.12-1+b1
  Candidat : 1.28.12-1+b1
 Table de version :
 *** 1.28.12-1+b1 500
        100 http://deb.debian.org/debian testing/main amd64 Packages
        500 http://deb.debian.org/debian unstable/main amd64 Packages
        100 /var/lib/dpkg/status
printer-driver-hpijs:
  Installé : 3.21.12+dfsg0-1
  Candidat : 3.21.12+dfsg0-1
 Table de version :
 *** 3.21.12+dfsg0-1 500
        100 http://deb.debian.org/debian testing/main amd64 Packages
        500 http://deb.debian.org/debian unstable/main amd64 Packages
        100 /var/lib/dpkg/status
gnome-desktop3-data:
  Installé : 42.0-1
  Candidat : 42.0-1
 Table de version :
 *** 42.0-1 500
        100 http://deb.debian.org/debian testing/main amd64 Packages
        100 http://deb.debian.org/debian testing/main i386 Packages
        500 http://deb.debian.org/debian unstable/main amd64 Packages
        500 http://deb.debian.org/debian unstable/main i386 Packages
        100 /var/lib/dpkg/status
libavahi-client3:
  Installé : 0.8-5
  Candidat : 0.8-5
 Table de version :
 *** 0.8-5 500
        100 http://deb.debian.org/debian testing/main amd64 Packages
        500 http://deb.debian.org/debian unstable/main amd64 Packages
        100 /var/lib/dpkg/status
libavahi-common-data:
  Installé : 0.8-5
  Candidat : 0.8-5
 Table de version :
 *** 0.8-5 500
        100 http://deb.debian.org/debian testing/main amd64 Packages
        500 http://deb.debian.org/debian unstable/main amd64 Packages
        100 /var/lib/dpkg/status
libavahi-common3:
  Installé : 0.8-5
  Candidat : 0.8-5
 Table de version :
 *** 0.8-5 500
        100 http://deb.debian.org/debian testing/main amd64 Packages
        500 http://deb.debian.org/debian unstable/main amd64 Packages
        100 /var/lib/dpkg/status
 

Hors ligne

#57 29-03-2022 18:31:58

Debian Alain
Membre
Lieu : Bretagne
Distrib. : bookworm unstable sid / bullseye (stable)
Noyau : Linux sid 5.17.0-1-amd64
(G)UI : Gnome X.org (X11) / GDM3
Inscription : 11-03-2017
Site Web

Re : [abandonné] transferts de fichiers / impression impossibles

ibTcBrP.jpg

apt policy dpkg


dpkg:
  Installé : 1.21.6
  Candidat : 1.21.6
 Table de version :
 *** 1.21.6 500
        500 http://deb.debian.org/debian unstable/main amd64 Packages
        100 /var/lib/dpkg/status
     1.21.2 100
        100 http://deb.debian.org/debian testing/main amd64 Packages
 



trouvé ceci , mais , je sais pas ...

https://unix.stackexchange.com/question … -available

Dernière modification par Debian Alain (29-03-2022 19:03:18)

Hors ligne

#58 29-03-2022 19:17:25

ylag
Membre
Inscription : 16-03-2020

Re : [abandonné] transferts de fichiers / impression impossibles

Bonjour,

Sous toute réserve, n'étant pas spécialiste de la chose...
En lien avec la discussion que tu cites au #57, tu pourrais peut-être tenter de réinitialiser aux valeurs par défaut le contenu de ton fichier /etc/cups/cupsd.conf ?

cp -v /usr/share/cups/cupsd.conf.default /etc/cups/cupsd.conf


Si, bien sûr, le fichier /usr/share/cups/cupsd.conf.default existe bien chez-toi; c'est le cas pour moi sur ma Bullseye.

A+

Hors ligne

#59 29-03-2022 19:28:05

Debian Alain
Membre
Lieu : Bretagne
Distrib. : bookworm unstable sid / bullseye (stable)
Noyau : Linux sid 5.17.0-1-amd64
(G)UI : Gnome X.org (X11) / GDM3
Inscription : 11-03-2017
Site Web

Re : [abandonné] transferts de fichiers / impression impossibles

ls /usr/share/cups/


banners                  data      locale        profiles
braille                  doc-root  mime          snmp.conf.default
charsets                 drv       model         templates
cupsd.conf.default       examples  ppdc          test-drivers
cups-files.conf.default  ipptool   ppd-updaters  usb
 



ls /etc/cups/


classes.conf       cupsd.conf.O     printers.conf    snmp.conf
classes.conf.O     cups-files.conf  printers.conf.O  ssl
cups-browsed.conf  interfaces       raw.convs        subscriptions.conf
cupsd.conf         ppd              raw.types        subscriptions.conf.O
 



cat /etc/cups/cupsd.conf


#
# Configuration file for the CUPS scheduler.  See "man cupsd.conf" for a
# complete description of this file.
#

# Log general information in error_log - change "warn" to "debug"
# for troubleshooting...
LogLevel warn
PageLogFormat

# Specifies the maximum size of the log files before they are rotated.  The value "0" disables log rotation.
MaxLogSize 0

# Default error policy for printers
ErrorPolicy retry-job

# Only listen for connections from the local machine.
Listen localhost:631
Listen /run/cups/cups.sock

# Show shared printers on the local network.
Browsing Yes
BrowseLocalProtocols dnssd

# Default authentication type, when authentication is required...
DefaultAuthType Basic

# Web interface setting...
WebInterface Yes

# Timeout after cupsd exits if idle (applied only if cupsd runs on-demand - with -l)
IdleExitTimeout 60

# Restrict access to the server...
<Location />
  Order allow,deny
</Location>

# Restrict access to the admin pages...
<Location /admin>
  Order allow,deny
</Location>

# Restrict access to configuration files...
<Location /admin/conf>
  AuthType Default
  Require user @SYSTEM
  Order allow,deny
</Location>

# Restrict access to log files...
<Location /admin/log>
  AuthType Default
  Require user @SYSTEM
  Order allow,deny
</Location>

# Set the default printer/job policies...
<Policy default>
  # Job/subscription privacy...
  JobPrivateAccess default
  JobPrivateValues default
  SubscriptionPrivateAccess default
  SubscriptionPrivateValues default

  # Job-related operations must be done by the owner or an administrator...
  <Limit Create-Job Print-Job Print-URI Validate-Job>
    Order deny,allow
  </Limit>

  <Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job Cancel-My-Jobs Close-Job CUPS-Move-Job CUPS-Get-Document>
    Require user @OWNER @SYSTEM
    Order deny,allow
  </Limit>

  # All administration operations require an administrator to authenticate...
  <Limit CUPS-Add-Modify-Printer CUPS-Delete-Printer CUPS-Add-Modify-Class CUPS-Delete-Class CUPS-Set-Default CUPS-Get-Devices>
    AuthType Default
    Require user @SYSTEM
    Order deny,allow
  </Limit>

  # All printer operations require a printer operator to authenticate...
  <Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After Cancel-Jobs CUPS-Accept-Jobs CUPS-Reject-Jobs>
    AuthType Default
    Require user @SYSTEM
    Order deny,allow
  </Limit>

  # Only the owner or an administrator can cancel or authenticate a job...
  <Limit Cancel-Job CUPS-Authenticate-Job>
    Require user @OWNER @SYSTEM
    Order deny,allow
  </Limit>

  <Limit All>
    Order deny,allow
  </Limit>
</Policy>

# Set the authenticated printer/job policies...
<Policy authenticated>
  # Job/subscription privacy...
  JobPrivateAccess default
  JobPrivateValues default
  SubscriptionPrivateAccess default
  SubscriptionPrivateValues default

  # Job-related operations must be done by the owner or an administrator...
  <Limit Create-Job Print-Job Print-URI Validate-Job>
    AuthType Default
    Order deny,allow
  </Limit>

  <Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job Cancel-My-Jobs Close-Job CUPS-Move-Job CUPS-Get-Document>
    AuthType Default
    Require user @OWNER @SYSTEM
    Order deny,allow
  </Limit>

  # All administration operations require an administrator to authenticate...
  <Limit CUPS-Add-Modify-Printer CUPS-Delete-Printer CUPS-Add-Modify-Class CUPS-Delete-Class CUPS-Set-Default>
    AuthType Default
    Require user @SYSTEM
    Order deny,allow
  </Limit>

  # All printer operations require a printer operator to authenticate...
  <Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After Cancel-Jobs CUPS-Accept-Jobs CUPS-Reject-Jobs>
    AuthType Default
    Require user @SYSTEM
    Order deny,allow
  </Limit>

  # Only the owner or an administrator can cancel or authenticate a job...
  <Limit Cancel-Job CUPS-Authenticate-Job>
    AuthType Default
    Require user @OWNER @SYSTEM
    Order deny,allow
  </Limit>

  <Limit All>
    Order deny,allow
  </Limit>
</Policy>

# Set the kerberized printer/job policies...
<Policy kerberos>
  # Job/subscription privacy...
  JobPrivateAccess default
  JobPrivateValues default
  SubscriptionPrivateAccess default
  SubscriptionPrivateValues default

  # Job-related operations must be done by the owner or an administrator...
  <Limit Create-Job Print-Job Print-URI Validate-Job>
    AuthType Negotiate
    Order deny,allow
  </Limit>

  <Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job Cancel-My-Jobs Close-Job CUPS-Move-Job CUPS-Get-Document>
    AuthType Negotiate
    Require user @OWNER @SYSTEM
    Order deny,allow
  </Limit>

  # All administration operations require an administrator to authenticate...
  <Limit CUPS-Add-Modify-Printer CUPS-Delete-Printer CUPS-Add-Modify-Class CUPS-Delete-Class CUPS-Set-Default>
    AuthType Default
    Require user @SYSTEM
    Order deny,allow
  </Limit>

  # All printer operations require a printer operator to authenticate...
  <Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After Cancel-Jobs CUPS-Accept-Jobs CUPS-Reject-Jobs>
    AuthType Default
    Require user @SYSTEM
    Order deny,allow
  </Limit>

  # Only the owner or an administrator can cancel or authenticate a job...
  <Limit Cancel-Job CUPS-Authenticate-Job>
    AuthType Negotiate
    Require user @OWNER @SYSTEM
    Order deny,allow
  </Limit>

  <Limit All>
    Order deny,allow
  </Limit>
</Policy>
 



cat /usr/share/cups/cupsd.conf.default


#
# Configuration file for the CUPS scheduler.  See "man cupsd.conf" for a
# complete description of this file.
#

# Log general information in error_log - change "warn" to "debug"
# for troubleshooting...
LogLevel warn
PageLogFormat

# Specifies the maximum size of the log files before they are rotated.  The value "0" disables log rotation.
MaxLogSize 0

# Default error policy for printers
ErrorPolicy retry-job

# Only listen for connections from the local machine.
Listen localhost:631
Listen /run/cups/cups.sock

# Show shared printers on the local network.
Browsing Yes
BrowseLocalProtocols dnssd

# Default authentication type, when authentication is required...
DefaultAuthType Basic

# Web interface setting...
WebInterface Yes

# Timeout after cupsd exits if idle (applied only if cupsd runs on-demand - with -l)
IdleExitTimeout 60

# Restrict access to the server...
<Location />
  Order allow,deny
</Location>

# Restrict access to the admin pages...
<Location /admin>
  Order allow,deny
</Location>

# Restrict access to configuration files...
<Location /admin/conf>
  AuthType Default
  Require user @SYSTEM
  Order allow,deny
</Location>

# Restrict access to log files...
<Location /admin/log>
  AuthType Default
  Require user @SYSTEM
  Order allow,deny
</Location>

# Set the default printer/job policies...
<Policy default>
  # Job/subscription privacy...
  JobPrivateAccess default
  JobPrivateValues default
  SubscriptionPrivateAccess default
  SubscriptionPrivateValues default

  # Job-related operations must be done by the owner or an administrator...
  <Limit Create-Job Print-Job Print-URI Validate-Job>
    Order deny,allow
  </Limit>

  <Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job Cancel-My-Jobs Close-Job CUPS-Move-Job CUPS-Get-Document>
    Require user @OWNER @SYSTEM
    Order deny,allow
  </Limit>

  # All administration operations require an administrator to authenticate...
  <Limit CUPS-Add-Modify-Printer CUPS-Delete-Printer CUPS-Add-Modify-Class CUPS-Delete-Class CUPS-Set-Default CUPS-Get-Devices>
    AuthType Default
    Require user @SYSTEM
    Order deny,allow
  </Limit>

  # All printer operations require a printer operator to authenticate...
  <Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After Cancel-Jobs CUPS-Accept-Jobs CUPS-Reject-Jobs>
    AuthType Default
    Require user @SYSTEM
    Order deny,allow
  </Limit>

  # Only the owner or an administrator can cancel or authenticate a job...
  <Limit Cancel-Job CUPS-Authenticate-Job>
    Require user @OWNER @SYSTEM
    Order deny,allow
  </Limit>

  <Limit All>
    Order deny,allow
  </Limit>
</Policy>

# Set the authenticated printer/job policies...
<Policy authenticated>
  # Job/subscription privacy...
  JobPrivateAccess default
  JobPrivateValues default
  SubscriptionPrivateAccess default
  SubscriptionPrivateValues default

  # Job-related operations must be done by the owner or an administrator...
  <Limit Create-Job Print-Job Print-URI Validate-Job>
    AuthType Default
    Order deny,allow
  </Limit>

  <Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job Cancel-My-Jobs Close-Job CUPS-Move-Job CUPS-Get-Document>
    AuthType Default
    Require user @OWNER @SYSTEM
    Order deny,allow
  </Limit>

  # All administration operations require an administrator to authenticate...
  <Limit CUPS-Add-Modify-Printer CUPS-Delete-Printer CUPS-Add-Modify-Class CUPS-Delete-Class CUPS-Set-Default>
    AuthType Default
    Require user @SYSTEM
    Order deny,allow
  </Limit>

  # All printer operations require a printer operator to authenticate...
  <Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After Cancel-Jobs CUPS-Accept-Jobs CUPS-Reject-Jobs>
    AuthType Default
    Require user @SYSTEM
    Order deny,allow
  </Limit>

  # Only the owner or an administrator can cancel or authenticate a job...
  <Limit Cancel-Job CUPS-Authenticate-Job>
    AuthType Default
    Require user @OWNER @SYSTEM
    Order deny,allow
  </Limit>

  <Limit All>
    Order deny,allow
  </Limit>
</Policy>

# Set the kerberized printer/job policies...
<Policy kerberos>
  # Job/subscription privacy...
  JobPrivateAccess default
  JobPrivateValues default
  SubscriptionPrivateAccess default
  SubscriptionPrivateValues default

  # Job-related operations must be done by the owner or an administrator...
  <Limit Create-Job Print-Job Print-URI Validate-Job>
    AuthType Negotiate
    Order deny,allow
  </Limit>

  <Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job Cancel-My-Jobs Close-Job CUPS-Move-Job CUPS-Get-Document>
    AuthType Negotiate
    Require user @OWNER @SYSTEM
    Order deny,allow
  </Limit>

  # All administration operations require an administrator to authenticate...
  <Limit CUPS-Add-Modify-Printer CUPS-Delete-Printer CUPS-Add-Modify-Class CUPS-Delete-Class CUPS-Set-Default>
    AuthType Default
    Require user @SYSTEM
    Order deny,allow
  </Limit>

  # All printer operations require a printer operator to authenticate...
  <Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After Cancel-Jobs CUPS-Accept-Jobs CUPS-Reject-Jobs>
    AuthType Default
    Require user @SYSTEM
    Order deny,allow
  </Limit>

  # Only the owner or an administrator can cancel or authenticate a job...
  <Limit Cancel-Job CUPS-Authenticate-Job>
    AuthType Negotiate
    Require user @OWNER @SYSTEM
    Order deny,allow
  </Limit>

  <Limit All>
    Order deny,allow
  </Limit>
</Policy>
 



avant de me décider , j'attends l'avis de robert2a .

merci ylag , c'est très gentil de ta part .

amicalement ,

alain .

coyotus.png

n.b.:   prVGP12.jpg

Dernière modification par Debian Alain (29-03-2022 19:49:43)

Hors ligne

#60 29-03-2022 20:52:07

Croutons
Membre
Distrib. : Debian10 Buster
Noyau : Linux 4.19.0-18-amd64
(G)UI : Mate
Inscription : 16-12-2016

Re : [abandonné] transferts de fichiers / impression impossibles

yasat --plugin cups.test


Found /etc/yasat/yasat.conf
  Using YASAT version                                              [ 848 ] 
  Using YASAT with UID=0                                           [ OK ]
  Using YASAT without SELinux                                      [ OK ]
  Detecting OS...                                                  [ DONE ]
    Debian Linux Linux 5.10.0-9-amd64
  Detecting TERM width...                                          [ 190 ] 
Color chart
 GREEN   is for good configuration or information
 RED     is for configuration that must be corrected
 ORANGE  is for optional configuration that can be done
 BLUE    is for information

At the end of the audit, the report will be available at /root/.yasat//yasat.report

=== Check CUPS ===
  /etc/cups/cupsd.conf                                             [ FOUND ] 
    Right of /etc/cups/cupsd.conf                                  [ OK ]
    Listen on localhost:631                                        [ OK ]
    Browsing                                                       [ on ]
    BrowseAllow                                                    [ NOTFOUND ]
  cups service                                                     [ ENABLED ] 
  Cups is started at boot                                          [ YES ] 
  Cups is installed by package                                     [ GOOD ]



je sais pas si sa peux t'apporter quelque chose je test ce paquet, pour l'instant j'ai des doutes sur sa véritable utilité big_smile

yasat --standard


la je digère pas lol

Description: outil simple et stupide d’audit
Le but d’YASAT (Yet Another Stupid Audit Tool) est d’être aussi simple que
possible avec des dépendances d’exécutables minimales (uniquement sed, grep et
cut). Son second but est de fournir pour chaque test un maximum
d'informations et de liens vers la documentation officielle. Il réalise
beaucoup de tests pour
des problèmes de configuration de sécurité et pour d’autres bonnes pratiques.
Il teste de nombreuses configurations de logiciels tels que : Apache, Bind DNS,
CUPS, PHP, configuration du noyau, MySQL, configuration du réseau, openvpn,
mise à jour de paquets, Samba, snmpd, Squid, syslog, Tomcat, comptes
d’utilisateurs, vsftpd, xinetd.

Dernière modification par Croutons (29-03-2022 20:56:13)


-->les cahiers du debutant<--      WikiDF-->Découvrir les principales commandes Linux<--
L' expérience, c'est le nom que chacun donne à ses erreurs. Oscar Wilde

Hors ligne

#61 29-03-2022 21:01:47

Debian Alain
Membre
Lieu : Bretagne
Distrib. : bookworm unstable sid / bullseye (stable)
Noyau : Linux sid 5.17.0-1-amd64
(G)UI : Gnome X.org (X11) / GDM3
Inscription : 11-03-2017
Site Web

Re : [abandonné] transferts de fichiers / impression impossibles

sudo yasat --plugin cups.test


Found /etc/yasat/yasat.conf
  Using YASAT version                                              [ 848 ] 
  Using YASAT with UID=0                                           [ OK ]
  Using YASAT without SELinux                                      [ OK ]
  Detecting OS...                                                  [ DONE ]
    Debian Linux Linux 5.16.0-5-amd64
  Detecting TERM width...                                          [ 80 ]
Color chart
 GREEN   is for good configuration or information
 RED     is for configuration that must be corrected
 ORANGE  is for optional configuration that can be done
 BLUE    is for information

At the end of the audit, the report will be available at /root/.yasat//yasat.report

=== Check CUPS ===
  /etc/cups/cupsd.conf                                             [ FOUND ] 
    Right of /etc/cups/cupsd.conf                                  [ 644 ]
      -> This file must be chmoded 640 or 600
    Listen on localhost:631                                        [ OK ]
    Browsing                                                       [ off ] 
    BrowseAllow                                                    [ NOTFOUND ]
  cups service                                                     [ ENABLED ] 
  Cups is started at boot                                          [ YES ] 
  Cups is installed by package                                     [ GOOD ]

 



tu en penses quoi , Croutons ?

Hors ligne

#62 29-03-2022 21:11:53

ubub
Membre
Distrib. : Debian
(G)UI : xfce
Inscription : 14-05-2019

Re : [abandonné] transferts de fichiers / impression impossibles

A log is  also  created  in
              ~/.yasat/yasat.result by default

Hors ligne

#63 29-03-2022 21:20:16

Debian Alain
Membre
Lieu : Bretagne
Distrib. : bookworm unstable sid / bullseye (stable)
Noyau : Linux sid 5.17.0-1-amd64
(G)UI : Gnome X.org (X11) / GDM3
Inscription : 11-03-2017
Site Web

Re : [abandonné] transferts de fichiers / impression impossibles

@ubub

j'ai beau regarder , je vois pas .

sudo yasat --standard


Found /etc/yasat/yasat.conf
  Using YASAT version                                              [ 848 ] 
  Using YASAT with UID=0                                           [ OK ]
  Using YASAT without SELinux                                      [ OK ]
  Detecting OS...                                                  [ DONE ]
    Debian Linux Linux 5.16.0-5-amd64
  Detecting TERM width...                                          [ 80 ]
Color chart
 GREEN   is for good configuration or information
 RED     is for configuration that must be corrected
 ORANGE  is for optional configuration that can be done
 BLUE    is for information

At the end of the audit, the report will be available at /root/.yasat//yasat.report

=== Check accounting and audit configuration ===
  /var/log/wtmp                                                    [ FOUND ] 
  /var/log/btmp                                                    [ FOUND ] 
  /var/log/faillog                                                 [ FOUND ] 
  /var/log/lastlog                                                 [ FOUND ] 
  accounting is not enabled                                        [ WARNING ]
    -> Enable the accounting with accton
  cracklib                                                         [ NOTFOUND ]
  /etc/shadow                                                      [ FOUND ] 
  Unknown password hash method for root                            [ $y ]
  Unknown password hash method for alain                           [ $y ]
  Unknown password hash method for systemd-coredump                [ !* ]
  default password encryption                                      [ sha512 ]
  audit is installed by package                                    [ GOOD ]
ERROR: unknown color red for Display()

Press ENTER to continue Ctrl/C to quit


 



le rapport se trouve dans /root/.yasat/yasat.report

Dernière modification par Debian Alain (29-03-2022 21:27:32)

Hors ligne

#64 29-03-2022 21:35:50

ubub
Membre
Distrib. : Debian
(G)UI : xfce
Inscription : 14-05-2019

Re : [abandonné] transferts de fichiers / impression impossibles

ca semble, j'avoue j'ai essayé j'ai rien pigé,
et j'ai retrouvé un fichier ~/.yasat/yasat.err vide ....
(j'ai pas fait en root, d'où ~ pour le chemin)

Hors ligne

#65 30-03-2022 01:39:24

robert2a
Membre
Distrib. : Buster 10 version 10.11
Noyau : kernel buster backports
(G)UI : Mate
Inscription : 15-11-2014

Re : [abandonné] transferts de fichiers / impression impossibles

je comprend pas que ce soit aussi compliquer de faire fonctionner une imprimante
pour le service cupsd tu a ceci


systemctl status cups.service
 


mais je pense que cups fonctionne bien , c'est au niveau de l' imprimante que ça bug
tu a le fichier par exemple  /etc/cups/printers.conf ou tu dois trouver ton imprimante HP

remarque:
tu devrais te concentrer sur le bureau (laisser tomber l'impression pour l'instant)
pour sid sur le raven pas de blocage avec "upgrade" ou "full-upgrade"
mais je suis a 500 sur sid et bookworm (pas de fichiers préférences )
donc sid a la priorité (version des paquets plus élevés ).
pas de paquets bloqués en version
après selon le retour de "apt-listbugs"  , attendre un peu parfois avant de lancer la mise a jours .
les correctifs rentre rapidement sur sid , tu la vue pour "dpkg"
de plus si tu attend un peu sur les mises a jours , tu aura plus de chance de voir un bug détecter et ou un correctif appliquer.

nota: dans mon "/home" j'ai des fichiers pour cups et autres en plus de /etc/cups
a mon avis cela peut être nettoyé . ( moi la plus part sont vide )

Dernière modification par robert2a (30-03-2022 03:35:41)


Machines : kabylake I7 7700 , AMD 1700(X) ,AMD threadripper gen1 , AMD Raven R3 2200G , AMD FX(tm)-8320

Hors ligne

#66 30-03-2022 09:44:27

Debian Alain
Membre
Lieu : Bretagne
Distrib. : bookworm unstable sid / bullseye (stable)
Noyau : Linux sid 5.17.0-1-amd64
(G)UI : Gnome X.org (X11) / GDM3
Inscription : 11-03-2017
Site Web

Re : [abandonné] transferts de fichiers / impression impossibles

robert2a  a écrit :

tu devrais te concentrer sur le bureau (laisser tomber l'impression pour l'instant)

oui , sans doute . mais connaissant gnome , ils ont sûrement livré un bureau brut donc pas  fini ou alors (et çà arrive très souvent) sans explications . ce qui fait que je suis perdu . çà s'est déjà produit . c'est rageant mais je peux rien y faire à part  changer de bureau ou attendre plus ample m.a.j.

pour l'impression , c'est très important pour moi . j'en ai un besoin vital . je peux pas laisser tomber .

que penses tu du conseil de ylag  , post #58 :  ?

cp -v /usr/share/cups/cupsd.conf.default /etc/cups/cupsd.conf



amicalement .

alain.

coyotus.png

n.b. : éteindre / allumer mon 2ème écran me renvoie toujours au login .
le bureau plante systématiquement .

Dernière modification par Debian Alain (30-03-2022 10:58:15)

Hors ligne

#67 30-03-2022 13:05:38

robert2a
Membre
Distrib. : Buster 10 version 10.11
Noyau : kernel buster backports
(G)UI : Mate
Inscription : 15-11-2014

Re : [abandonné] transferts de fichiers / impression impossibles

pour le conseil au dessus , je pense que les deux fichiers sont identiques .
pour les écrans , allumer / brancher puis démarrer l'ordinateur que ce passe t'il ?
pour le bureau gnome tu a tord , c'est la priorité .

pour ton imprimante/scanner quelques liens pour te rafraîchir la mémoire .
=> https://wiki.debian.org/fr/SystemPrinting
=> https://wiki.debian.org/CUPSDriverlessP … ssPrinting
=> https://wiki.debian.org/CUPSAirPrint?ac … t=AirPrint

pour les paquets regarder ceci (moi je n'en ai pas besoin pour l'instant )


apt policy ipp-usb sane-airscan
ipp-usb:
  Installé : (aucun)
  Candidat : 0.9.19-2
 Table de version :
     0.9.19-2 500
        500 https://deb.debian.org/debian bookworm/main amd64 Packages
sane-airscan:
  Installé : (aucun)
  Candidat : 0.99.27-1
 Table de version :
     0.99.27-1 500
        500 https://deb.debian.org/debian bookworm/main amd64 Packages
 



quand a ceci a mon avis cela doit faire rire  tongue


pour l'impression , c'est très important pour moi . j'en ai un besoin vital . je peux pas laisser tomber .
 



quand on a besoin d'une machine sure et disponible , on utilise pas sid mais stable (actuellement bullseye ).

ps: j'ai actuellement jusqu'a 3 debian par machine (buster , bullseye , bookworm) , chacune sur un disque

et réparer testing ou sid , pas une galère , mais un plaisir  wink

si tu cherche tu va retrouver tes anciens fils pour cette imprimante sur le forum . (a l'époque bullseye en testing , mais bon moi la mémoire pas mon fort ).

quand a gnome , si sid te pose trop de problèmes , un retour a testing  le temps de remettre un peu d'ordre sur le bureau et revenir a sid quand ce sera plus calme .
enfin tu vois   wink


Machines : kabylake I7 7700 , AMD 1700(X) ,AMD threadripper gen1 , AMD Raven R3 2200G , AMD FX(tm)-8320

Hors ligne

#68 30-03-2022 13:18:52

robert2a
Membre
Distrib. : Buster 10 version 10.11
Noyau : kernel buster backports
(G)UI : Mate
Inscription : 15-11-2014

Re : [abandonné] transferts de fichiers / impression impossibles

ceci peut être aussi pour toi => https://packages.debian.org/sid/libsane-hpaio


apt policy libsane-hpaio
libsane-hpaio:
  Installé : 3.21.12+dfsg0-1
  Candidat : 3.21.12+dfsg0-1
 Table de version :
 *** 3.21.12+dfsg0-1 500
        500 https://deb.debian.org/debian bookworm/main amd64 Packages
        100 /var/lib/dpkg/status
 


tu en profite pour tester l'impression et la partie scanner
tu aura peut être besoin de cela  =>  installer les paquets hplip{-gui}

nota: j'ai pas le matériel pour tester avec toi , imprimante réseau HP 8210 et scanner usb Epson 1640SU

Dernière modification par robert2a (30-03-2022 13:22:15)


Machines : kabylake I7 7700 , AMD 1700(X) ,AMD threadripper gen1 , AMD Raven R3 2200G , AMD FX(tm)-8320

Hors ligne

#69 30-03-2022 13:49:48

Debian Alain
Membre
Lieu : Bretagne
Distrib. : bookworm unstable sid / bullseye (stable)
Noyau : Linux sid 5.17.0-1-amd64
(G)UI : Gnome X.org (X11) / GDM3
Inscription : 11-03-2017
Site Web

Re : [abandonné] transferts de fichiers / impression impossibles

robert2a  a écrit :

pour le conseil au dessus , je pense que les deux fichiers sont identiques .

la question , c'est : j'exécute la commande ? ou pas ?

robert2a  a écrit :

pour les écrans , allumer / brancher puis démarrer l'ordinateur que ce passe t'il ?

çà fait plusieurs fois que je te dis que çà fait redémarrer mon bureau . retour au login .

robert2a  a écrit :

pour le bureau gnome tu a tord , c'est la priorité .

je suis d'accord avec toi mais si la m.a.j. n'est pas fournie et que les paquets ne sont pas à jour , j'y peux quoi ?

robert2a  a écrit :

quand a ceci a mon avis cela doit faire rire  tongue

pour l'impression , c'est très important pour moi . j'en ai un besoin vital . je peux pas laisser tomber .

il me semble bien avoir précisé que j'avais un besoin urgent d'imprimer des documents médicaux , non ?

robert2a  a écrit :

quand on a besoin d'une machine sure et disponible , on utilise pas sid mais stable (actuellement bullseye ).

c'est ce que j'ai fait , dans l'urgence , j'ai utilisé ma stable . et j'ai pu m'en tirer comme çà .

)robert2a  a écrit :

quand a gnome , si sid te pose trop de problèmes , un retour a testing  le temps de remettre un peu d'ordre sur le bureau et revenir a sid quand ce sera plus calme .
enfin tu vois  .

je vais voir , oui , eventuellement .

apt policy ipp-usb sane-airscan libsane-hpaio


ipp-usb:
  Installé : 0.9.20-1
  Candidat : 0.9.20-1
 Table de version :
 *** 0.9.20-1 500
        500 http://deb.debian.org/debian unstable/main amd64 Packages
        100 /var/lib/dpkg/status
     0.9.19-2 100
        100 http://deb.debian.org/debian testing/main amd64 Packages
sane-airscan:
  Installé : 0.99.27-1
  Candidat : 0.99.27-1
 Table de version :
 *** 0.99.27-1 500
        100 http://deb.debian.org/debian testing/main amd64 Packages
        500 http://deb.debian.org/debian unstable/main amd64 Packages
        100 /var/lib/dpkg/status
libsane-hpaio:
  Installé : 3.21.12+dfsg0-1+b1
  Candidat : 3.21.12+dfsg0-1+b1
 Table de version :
 *** 3.21.12+dfsg0-1+b1 500
        500 http://deb.debian.org/debian unstable/main amd64 Packages
        100 /var/lib/dpkg/status
     3.21.12+dfsg0-1 100
        100 http://deb.debian.org/debian testing/main amd64 Packages
 

Dernière modification par Debian Alain (30-03-2022 13:58:46)

Hors ligne

#70 30-03-2022 14:23:23

robert2a
Membre
Distrib. : Buster 10 version 10.11
Noyau : kernel buster backports
(G)UI : Mate
Inscription : 15-11-2014

Re : [abandonné] transferts de fichiers / impression impossibles

a priori tu a tous les paquets installé , je sais pas, je connaît pas ce mode d'impression sans driver.
je suppose que le mode scanner ne fonctionne pas non plus

pour l'écran , il y a une nuance entre brancher le deuxième écran a chaud ( ordinateur allumer ) ou démarrer l'ordinateur avec les deux écrans allumer/brancher
la aussi ce problème est pas normal

Machines : kabylake I7 7700 , AMD 1700(X) ,AMD threadripper gen1 , AMD Raven R3 2200G , AMD FX(tm)-8320

Hors ligne

#71 30-03-2022 14:48:53

ubub
Membre
Distrib. : Debian
(G)UI : xfce
Inscription : 14-05-2019

Re : [abandonné] transferts de fichiers / impression impossibles

salut,
au fil de tes posts, j'ai pas vu si t'avais réinstallé gnome-control-center ou si ça avait échoué ...
https://packages.debian.org/sid/gnome-control-center
peut-être ca peut t'aider ...

Hors ligne

#72 30-03-2022 14:54:42

Debian Alain
Membre
Lieu : Bretagne
Distrib. : bookworm unstable sid / bullseye (stable)
Noyau : Linux sid 5.17.0-1-amd64
(G)UI : Gnome X.org (X11) / GDM3
Inscription : 11-03-2017
Site Web

Re : [abandonné] transferts de fichiers / impression impossibles

sudo journalctl -b -r -p err


mars 30 14:35:29 sid colord-sane[114281]: io/hpmud/musb.c 2101: Invalid usb_open: Permission denied
mars 30 14:35:29 sid colord-sane[114281]: io/hpmud/musb.c 2101: Invalid usb_open: Permission denied
mars 30 14:35:29 sid colord-sane[114281]: io/hpmud/musb.c 2101: Invalid usb_open: Permission denied
mars 30 14:35:29 sid colord-sane[114281]: io/hpmud/musb.c 2101: Invalid usb_open: Permission denied
mars 30 14:35:29 sid colord-sane[114281]: io/hpmud/musb.c 2101: Invalid usb_open: Permission denied
mars 30 14:35:29 sid colord-sane[114281]: io/hpmud/musb.c 2101: Invalid usb_open: Permission denied
mars 30 10:55:48 sid gdm-launch-environment][44536]: GLib-GObject: g_object_unref: assertion 'G_IS_OBJECT (object)' failed
mars 30 10:55:27 sid gnome-session-binary[44609]: GLib-GIO-CRITICAL: g_bus_get_sync: assertion 'error == NULL || *error == NULL' failed
mars 30 10:55:27 sid gnome-session-binary[44609]: GLib-GIO-CRITICAL: g_bus_get_sync: assertion 'error == NULL || *error == NULL' failed
mars 30 09:40:18 sid systemd[1]: Failed to start Refresh fwupd metadata and update motd.
mars 30 09:12:36 sid gdm-launch-environment][1156]: GLib-GObject: g_object_unref: assertion 'G_IS_OBJECT (object)' failed
mars 30 09:12:32 sid gdm-password][2186]: gkr-pam: unable to locate daemon control file
mars 30 09:12:14 sid gnome-session-binary[1245]: GLib-GIO-CRITICAL: g_bus_get_sync: assertion 'error == NULL || *error == NULL' failed
mars 30 09:12:14 sid gnome-session-binary[1245]: GLib-GIO-CRITICAL: g_bus_get_sync: assertion 'error == NULL || *error == NULL' failed
mars 30 09:12:14 sid smartd[958]: Device: /dev/nvme0, number of Error Log entries increased from 758 to 759
mars 30 09:12:12 sid kernel: i2c i2c-3: adapter quirk: no zero length (addr 0x001f, size 0, write)
mars 30 09:12:12 sid kernel: i2c i2c-3: adapter quirk: no zero length (addr 0x001e, size 0, write)
mars 30 09:12:12 sid kernel: i2c i2c-3: adapter quirk: no zero length (addr 0x001d, size 0, write)
mars 30 09:12:12 sid kernel: i2c i2c-3: adapter quirk: no zero length (addr 0x001c, size 0, write)
mars 30 09:12:12 sid kernel: i2c i2c-3: adapter quirk: no zero length (addr 0x001b, size 0, write)
mars 30 09:12:12 sid kernel: i2c i2c-3: adapter quirk: no zero length (addr 0x001a, size 0, write)
mars 30 09:12:12 sid kernel: i2c i2c-3: adapter quirk: no zero length (addr 0x0019, size 0, write)
mars 30 09:12:12 sid kernel: i2c i2c-3: adapter quirk: no zero length (addr 0x0018, size 0, write)
 



pour la première ligne :

io/hpmud/musb.c 2101: Invalid usb_open: Permission denied


trouvé ceci :
https://askubuntu.com/questions/1209481 … ion-denied

pour celle là :

kernel: i2c i2c-3: adapter quirk: no zero length (addr 0x001f, size 0, write)


trouvé ceci (mais rien compris) : https://stackoverflow.com/questions/125 … ero-length

@ ubub

apt policy gnome-control-center


gnome-control-center:
  Installé : 1:41.4-2
  Candidat : 1:41.4-2
 Table de version :
 *** 1:41.4-2 500
        500 http://deb.debian.org/debian unstable/main amd64 Packages
        100 /var/lib/dpkg/status
     1:41.4-1 100
        100 http://deb.debian.org/debian testing/main amd64 Packages
 

Dernière modification par Debian Alain (30-03-2022 14:56:33)

Hors ligne

#73 30-03-2022 15:22:34

ubub
Membre
Distrib. : Debian
(G)UI : xfce
Inscription : 14-05-2019

Re : [abandonné] transferts de fichiers / impression impossibles

Debian Alain a écrit :


pour celle là :
kernel: i2c i2c-3:


https://www.kernel.org/doc/html/v5.17/i … -i801.html
ca a l'air plus intérressant, ça renverrait sur une histoire de pilote (?)

Hors ligne

#74 30-03-2022 15:26:12

Debian Alain
Membre
Lieu : Bretagne
Distrib. : bookworm unstable sid / bullseye (stable)
Noyau : Linux sid 5.17.0-1-amd64
(G)UI : Gnome X.org (X11) / GDM3
Inscription : 11-03-2017
Site Web

Re : [abandonné] transferts de fichiers / impression impossibles

alain@sid:~/Documents$ cat Xorg-de-alain.log


[    21.170] (--) Log file renamed from "/home/alain/.local/share/xorg/Xorg.pid-2253.log" to "/home/alain/.local/share/xorg/Xorg.0.log"
[    21.171]
X.Org X Server 1.21.1.3
X Protocol Version 11, Revision 0
[    21.171] Current Operating System: Linux sid 5.16.0-5-amd64 #1 SMP PREEMPT Debian 5.16.14-1 (2022-03-15) x86_64
[    21.171] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.16.0-5-amd64 root=UUID=6a094235-a2d1-4e18-864d-a2a6234eb693 ro quiet
[    21.171] xorg-server 2:21.1.3-2+b1 (https://www.debian.org/support)
[    21.171] Current version of pixman: 0.40.0
[    21.171]  Before reporting problems, check http://wiki.x.org
  to make sure that you have the latest version.
[    21.171] Markers: (--) probed, (**) from config file, (==) default setting,
  (++) from command line, (!!) notice, (II) informational,
  (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    21.171] (==) Log file: "/home/alain/.local/share/xorg/Xorg.0.log", Time: Wed Mar 30 15:14:12 2022
[    21.171] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    21.172] (==) No Layout section.  Using the first Screen section.
[    21.172] (==) No screen section available. Using defaults.
[    21.172] (**) |-->Screen "Default Screen Section" (0)
[    21.172] (**) |   |-->Monitor "<default monitor>"
[    21.172] (==) No monitor specified for screen "Default Screen Section".
  Using a default monitor configuration.
[    21.172] (==) Automatically adding devices
[    21.172] (==) Automatically enabling devices
[    21.172] (==) Automatically adding GPU devices
[    21.172] (==) Automatically binding GPU devices
[    21.172] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    21.172] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    21.172]  Entry deleted from font path.
[    21.172] (==) FontPath set to:
  /usr/share/fonts/X11/misc,
  /usr/share/fonts/X11/100dpi/:unscaled,
  /usr/share/fonts/X11/75dpi/:unscaled,
  /usr/share/fonts/X11/Type1,
  /usr/share/fonts/X11/100dpi,
  /usr/share/fonts/X11/75dpi,
  built-ins
[    21.172] (==) ModulePath set to "/usr/lib/xorg/modules"
[    21.172] (II) The server relies on udev to provide the list of input devices.
  If no devices become available, reconfigure udev or disable AutoAddDevices.
[    21.172] (II) Loader magic: 0x562fdeb87f20
[    21.172] (II) Module ABI versions:
[    21.172]  X.Org ANSI C Emulation: 0.4
[    21.172]  X.Org Video Driver: 25.2
[    21.172]  X.Org XInput driver : 24.4
[    21.172]  X.Org Server Extension : 10.0
[    21.173] (++) using VT number 2

[    21.174] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_32
[    21.174] (II) xfree86: Adding drm device (/dev/dri/card0)
[    21.174] (II) Platform probe for /sys/devices/pci0000:00/0000:00:03.1/0000:08:00.0/0000:09:00.0/0000:0a:00.0/drm/card0
[    21.174] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 14 paused 0
[    21.177] (--) PCI:*(10@0:0:0) 1002:73bf:1da2:e437 rev 195, Mem @ 0xd0000000/268435456, 0xe0000000/2097152, 0xfcc00000/1048576, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
[    21.177] (II) LoadModule: "glx"
[    21.177] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    21.178] (II) Module glx: vendor="X.Org Foundation"
[    21.178]  compiled for 1.21.1.3, module version = 1.0.0
[    21.178]  ABI class: X.Org Server Extension, version 10.0
[    21.178] (II) Applying OutputClass "AMDgpu" to /dev/dri/card0
[    21.178]  loading driver: amdgpu
[    21.178] (==) Matched amdgpu as autoconfigured driver 0
[    21.178] (==) Matched ati as autoconfigured driver 1
[    21.178] (==) Matched modesetting as autoconfigured driver 2
[    21.178] (==) Matched fbdev as autoconfigured driver 3
[    21.178] (==) Matched vesa as autoconfigured driver 4
[    21.178] (==) Assigned the driver to the xf86ConfigLayout
[    21.178] (II) LoadModule: "amdgpu"
[    21.179] (II) Loading /usr/lib/xorg/modules/drivers/amdgpu_drv.so
[    21.180] (II) Module amdgpu: vendor="X.Org Foundation"
[    21.180]  compiled for 1.21.1.3, module version = 22.0.0
[    21.180]  Module class: X.Org Video Driver
[    21.180]  ABI class: X.Org Video Driver, version 25.2
[    21.180] (II) LoadModule: "ati"
[    21.180] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[    21.181] (II) Module ati: vendor="X.Org Foundation"
[    21.181]  compiled for 1.21.1.3, module version = 19.1.0
[    21.181]  Module class: X.Org Video Driver
[    21.181]  ABI class: X.Org Video Driver, version 25.2
[    21.236] (II) LoadModule: "radeon"
[    21.236] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[    21.237] (II) Module radeon: vendor="X.Org Foundation"
[    21.237]  compiled for 1.21.1.3, module version = 19.1.0
[    21.237]  Module class: X.Org Video Driver
[    21.237]  ABI class: X.Org Video Driver, version 25.2
[    21.237] (II) LoadModule: "modesetting"
[    21.237] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    21.238] (II) Module modesetting: vendor="X.Org Foundation"
[    21.238]  compiled for 1.21.1.3, module version = 1.21.1
[    21.238]  Module class: X.Org Video Driver
[    21.238]  ABI class: X.Org Video Driver, version 25.2
[    21.238] (II) LoadModule: "fbdev"
[    21.238] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    21.238] (II) Module fbdev: vendor="X.Org Foundation"
[    21.238]  compiled for 1.21.1.3, module version = 0.5.0
[    21.238]  Module class: X.Org Video Driver
[    21.238]  ABI class: X.Org Video Driver, version 25.2
[    21.238] (II) LoadModule: "vesa"
[    21.238] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    21.238] (II) Module vesa: vendor="X.Org Foundation"
[    21.238]  compiled for 1.21.1.3, module version = 2.5.0
[    21.238]  Module class: X.Org Video Driver
[    21.238]  ABI class: X.Org Video Driver, version 25.2
[    21.238] (II) AMDGPU: Driver for AMD Radeon:
  All GPUs supported by the amdgpu kernel driver
[    21.238] (II) RADEON: Driver for ATI/AMD Radeon chipsets:
  ATI Radeon Mobility X600 (M24), ATI FireMV 2400,
  ATI Radeon Mobility X300 (M24), ATI FireGL M24 GL,
  ATI Radeon X600 (RV380), ATI FireGL V3200 (RV380),
  ATI Radeon IGP320 (A3), ATI Radeon IGP330/340/350 (A4),
  ATI Radeon 9500, ATI Radeon 9600TX, ATI FireGL Z1, ATI Radeon 9800SE,
  ATI Radeon 9800, ATI FireGL X2, ATI Radeon 9600, ATI Radeon 9600SE,
  ATI Radeon 9600XT, ATI FireGL T2, ATI Radeon 9650, ATI FireGL RV360,
  ATI Radeon 7000 IGP (A4+), ATI Radeon 8500 AIW,
  ATI Radeon IGP320M (U1), ATI Radeon IGP330M/340M/350M (U2),
  ATI Radeon Mobility 7000 IGP, ATI Radeon 9000/PRO, ATI Radeon 9000,
  ATI Radeon X800 (R420), ATI Radeon X800PRO (R420),
  ATI Radeon X800SE (R420), ATI FireGL X3 (R420),
  ATI Radeon Mobility 9800 (M18), ATI Radeon X800 SE (R420),
  ATI Radeon X800XT (R420), ATI Radeon X800 VE (R420),
  ATI Radeon X850 (R480), ATI Radeon X850 XT (R480),
  ATI Radeon X850 SE (R480), ATI Radeon X850 PRO (R480),
  ATI Radeon X850 XT PE (R480), ATI Radeon Mobility M7,
  ATI Mobility FireGL 7800 M7, ATI Radeon Mobility M6,
  ATI FireGL Mobility 9000 (M9), ATI Radeon Mobility 9000 (M9),
  ATI Radeon 9700 Pro, ATI Radeon 9700/9500Pro, ATI FireGL X1,
  ATI Radeon 9800PRO, ATI Radeon 9800XT,
  ATI Radeon Mobility 9600/9700 (M10/M11),
  ATI Radeon Mobility 9600 (M10), ATI Radeon Mobility 9600 (M11),
  ATI FireGL Mobility T2 (M10), ATI FireGL Mobility T2e (M11),
  ATI Radeon, ATI FireGL 8700/8800, ATI Radeon 8500, ATI Radeon 9100,
  ATI Radeon 7500, ATI Radeon VE/7000, ATI ES1000,
  ATI Radeon Mobility X300 (M22), ATI Radeon Mobility X600 SE (M24C),
  ATI FireGL M22 GL, ATI Radeon X800 (R423), ATI Radeon X800PRO (R423),
  ATI Radeon X800LE (R423), ATI Radeon X800SE (R423),
  ATI Radeon X800 XTP (R430), ATI Radeon X800 XL (R430),
  ATI Radeon X800 SE (R430), ATI Radeon X800 (R430),
  ATI FireGL V7100 (R423), ATI FireGL V5100 (R423),
  ATI FireGL unknown (R423), ATI Mobility FireGL V5000 (M26),
  ATI Mobility Radeon X700 XL (M26), ATI Mobility Radeon X700 (M26),
  ATI Radeon X550XTX, ATI Radeon 9100 IGP (A5),
  ATI Radeon Mobility 9100 IGP (U3), ATI Radeon XPRESS 200,
  ATI Radeon XPRESS 200M, ATI Radeon 9250, ATI Radeon 9200,
  ATI Radeon 9200SE, ATI FireMV 2200, ATI Radeon X300 (RV370),
  ATI Radeon X600 (RV370), ATI Radeon X550 (RV370),
  ATI FireGL V3100 (RV370), ATI FireMV 2200 PCIE (RV370),
  ATI Radeon Mobility 9200 (M9+), ATI Mobility Radeon X800 XT (M28),
  ATI Mobility FireGL V5100 (M28), ATI Mobility Radeon X800 (M28),
  ATI Radeon X850, ATI unknown Radeon / FireGL (R480),
  ATI Radeon X800XT (R423), ATI FireGL V5000 (RV410),
  ATI Radeon X700 XT (RV410), ATI Radeon X700 PRO (RV410),
  ATI Radeon X700 SE (RV410), ATI Radeon X700 (RV410),
  ATI Radeon X1800, ATI Mobility Radeon X1800 XT,
  ATI Mobility Radeon X1800, ATI Mobility FireGL V7200,
  ATI FireGL V7200, ATI FireGL V5300, ATI Mobility FireGL V7100,
  ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
  ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
  ATI Mobility Radeon X1400, ATI Radeon X1550 64-bit,
  ATI Mobility Radeon X1300, ATI Radeon X1300, ATI FireGL V3300,
  ATI FireGL V3350, ATI Mobility Radeon X1450,
  ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
  ATI FireMV 2250, ATI Radeon X1650, ATI Mobility FireGL V5200,
  ATI Mobility Radeon X1600, ATI Radeon X1300 XT/X1600 Pro,
  ATI FireGL V3400, ATI Mobility FireGL V5250,
  ATI Mobility Radeon X1700, ATI Mobility Radeon X1700 XT,
  ATI FireGL V5200, ATI Radeon X2300HD, ATI Mobility Radeon HD 2300,
  ATI Radeon X1950, ATI Radeon X1900, ATI AMD Stream Processor,
  ATI RV560, ATI Mobility Radeon X1900, ATI Radeon X1950 GT, ATI RV570,
  ATI FireGL V7400, ATI Radeon 9100 PRO IGP,
  ATI Radeon Mobility 9200 IGP, ATI Radeon X1200, ATI RS740,
  ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro,
  ATI Radeon HD 2900 GT, ATI FireGL V8650, ATI FireGL V8600,
  ATI FireGL V7600, ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
  ATI Radeon HD 4850 x2, ATI FirePro V8750 (FireGL),
  ATI FirePro V7760 (FireGL), ATI Mobility RADEON HD 4850,
  ATI Mobility RADEON HD 4850 X2, ATI FirePro RV770,
  AMD FireStream 9270, AMD FireStream 9250, ATI FirePro V8700 (FireGL),
  ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
  ATI FirePro M7750, ATI M98, ATI Mobility Radeon HD 4650,
  ATI Radeon RV730 (AGP), ATI Mobility Radeon HD 4670,
  ATI FirePro M5750, ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
  ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
  ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
  ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
  ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
  ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI RV610,
  ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro,
  ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI Radeon HD 2350,
  ATI Mobility Radeon HD 2400 XT, ATI Mobility Radeon HD 2400,
  ATI RADEON E2400, ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
  ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
  ATI Mobility Radeon HD 3850 X2, ATI Mobility Radeon HD 3870,
  ATI Mobility Radeon HD 3870 X2, ATI Radeon HD3870 X2,
  ATI FireGL V7700, ATI Radeon HD3690, AMD Firestream 9170,
  ATI Radeon HD 4550, ATI Radeon RV710, ATI Radeon HD 4350,
  ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
  ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
  ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
  ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
  ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
  ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
  ATI FireGL V3600, ATI Radeon HD 2600 LE,
  ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
  ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
  ATI Radeon HD 3450, ATI Radeon HD 3430, ATI FirePro V3700,
  ATI FireMV 2450, ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
  ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
  ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
  ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
  ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
  ATI Radeon HD 3300 Graphics, ATI Radeon 3000 Graphics, SUMO, SUMO2,
  ATI Radeon HD 4200, ATI Radeon 4100, ATI Mobility Radeon HD 4200,
  ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
  AMD Radeon HD 6310 Graphics, AMD Radeon HD 6250 Graphics,
  AMD Radeon HD 6300 Series Graphics,
  AMD Radeon HD 6200 Series Graphics, PALM, CYPRESS,
  ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
  AMD Firestream 9350, ATI Radeon HD 5800 Series,
  ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
  ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
  ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
  ATI Radeon HD 5670, ATI Radeon HD 5570, ATI Radeon HD 5500 Series,
  REDWOOD, ATI Mobility Radeon Graphics, CEDAR, ATI FirePro 2270,
  ATI Radeon HD 5450, CAYMAN, AMD Radeon HD 6900 Series,
  AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series, BARTS,
  AMD Radeon HD 6800 Series, AMD Radeon HD 6700 Series, TURKS, CAICOS,
  ARUBA, TAHITI, PITCAIRN, VERDE, OLAND, HAINAN, BONAIRE, KABINI,
  MULLINS, KAVERI, HAWAII
[    21.243] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    21.243] (II) FBDEV: driver for framebuffer: fbdev
[    21.243] (II) VESA: driver for VESA chipsets: vesa
[    21.243] xf86EnableIO: failed to enable I/O ports 0000-03ff (Operation not permitted)
[    21.246] (WW) Falling back to old probe method for modesetting
[    21.246] (WW) Falling back to old probe method for fbdev
[    21.246] (II) Loading sub module "fbdevhw"
[    21.246] (II) LoadModule: "fbdevhw"
[    21.246] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    21.246] (II) Module fbdevhw: vendor="X.Org Foundation"
[    21.246]  compiled for 1.21.1.3, module version = 0.0.2
[    21.246]  ABI class: X.Org Video Driver, version 25.2
[    21.246] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[    21.246] (II) AMDGPU(0): Creating default Display subsection in Screen section
  "Default Screen Section" for depth/fbbpp 24/32
[    21.246] (==) AMDGPU(0): Depth 24, (--) framebuffer bpp 32
[    21.246] (II) AMDGPU(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[    21.246] (==) AMDGPU(0): Default visual is TrueColor
[    21.246] (==) AMDGPU(0): RGB weight 888
[    21.246] (II) AMDGPU(0): Using 8 bits per RGB (8 bit DAC)
[    21.246] (--) AMDGPU(0): Chipset: "AMD Radeon RX 6800" (ChipID = 0x73bf)
[    21.246] (II) Loading sub module "fb"
[    21.246] (II) LoadModule: "fb"
[    21.246] (II) Module "fb" already built-in
[    21.246] (II) Loading sub module "dri2"
[    21.246] (II) LoadModule: "dri2"
[    21.246] (II) Module "dri2" already built-in
[    21.262] (II) Loading sub module "glamoregl"
[    21.262] (II) LoadModule: "glamoregl"
[    21.262] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[    21.264] (II) Module glamoregl: vendor="X.Org Foundation"
[    21.264]  compiled for 1.21.1.3, module version = 1.0.1
[    21.264]  ABI class: X.Org ANSI C Emulation, version 0.4
[    21.270] (II) AMDGPU(0): glamor X acceleration enabled on AMD Radeon RX 6800 (SIENNA_CICHLID, DRM 3.44.0, 5.16.0-5-amd64, LLVM 13.0.1)
[    21.270] (II) AMDGPU(0): glamor detected, initialising EGL layer.
[    21.270] (==) AMDGPU(0): TearFree property default: auto
[    21.270] (==) AMDGPU(0): VariableRefresh: disabled
[    21.270] (==) AMDGPU(0): AsyncFlipSecondaries: disabled
[    21.270] (II) AMDGPU(0): KMS Pageflipping: enabled
[    21.272] (II) AMDGPU(0): Output DisplayPort-0 has no monitor section
[    21.272] (II) AMDGPU(0): Output DisplayPort-1 has no monitor section
[    21.272] (II) AMDGPU(0): Output DisplayPort-2 has no monitor section
[    21.272] (II) AMDGPU(0): Output HDMI-A-0 has no monitor section
[    21.277] (II) AMDGPU(0): EDID for output DisplayPort-0
[    21.277] (II) AMDGPU(0): Manufacturer: SAM  Model: f35  Serial#: 1113217602
[    21.277] (II) AMDGPU(0): Year: 2019  Week: 44
[    21.277] (II) AMDGPU(0): EDID Version: 1.4
[    21.277] (II) AMDGPU(0): Digital Display Input
[    21.277] (II) AMDGPU(0): 10 bits per channel
[    21.277] (II) AMDGPU(0): Digital interface is DisplayPort
[    21.277] (II) AMDGPU(0): Max Image Size [cm]: horiz.: 70  vert.: 39
[    21.277] (II) AMDGPU(0): Gamma: 2.20
[    21.277] (II) AMDGPU(0): DPMS capabilities: Off
[    21.277] (II) AMDGPU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 YCrCb 4:2:2
[    21.278] (II) AMDGPU(0): First detailed timing is preferred mode
[    21.278] (II) AMDGPU(0): Preferred mode is native pixel format and refresh rate
[    21.278] (II) AMDGPU(0): Display is continuous-frequency
[    21.278] (II) AMDGPU(0): redX: 0.686 redY: 0.311   greenX: 0.261 greenY: 0.686
[    21.278] (II) AMDGPU(0): blueX: 0.150 blueY: 0.061   whiteX: 0.313 whiteY: 0.329
[    21.278] (II) AMDGPU(0): Supported established timings:
[    21.278] (II) AMDGPU(0): 720x400@70Hz
[    21.278] (II) AMDGPU(0): 640x480@60Hz
[    21.278] (II) AMDGPU(0): 640x480@67Hz
[    21.278] (II) AMDGPU(0): 640x480@72Hz
[    21.278] (II) AMDGPU(0): 640x480@75Hz
[    21.278] (II) AMDGPU(0): 800x600@56Hz
[    21.278] (II) AMDGPU(0): 800x600@60Hz
[    21.278] (II) AMDGPU(0): 800x600@72Hz
[    21.278] (II) AMDGPU(0): 800x600@75Hz
[    21.278] (II) AMDGPU(0): 832x624@75Hz
[    21.278] (II) AMDGPU(0): 1024x768@60Hz
[    21.278] (II) AMDGPU(0): 1024x768@70Hz
[    21.278] (II) AMDGPU(0): 1024x768@75Hz
[    21.278] (II) AMDGPU(0): 1280x1024@75Hz
[    21.278] (II) AMDGPU(0): 1152x864@75Hz
[    21.278] (II) AMDGPU(0): Manufacturer's mask: 0
[    21.278] (II) AMDGPU(0): Supported standard timings:
[    21.278] (II) AMDGPU(0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[    21.278] (II) AMDGPU(0): #1: hsize: 1280  vsize 800  refresh: 60  vid: 129
[    21.278] (II) AMDGPU(0): #2: hsize: 1280  vsize 720  refresh: 60  vid: 49281
[    21.278] (II) AMDGPU(0): #3: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    21.278] (II) AMDGPU(0): #4: hsize: 1600  vsize 900  refresh: 60  vid: 49321
[    21.278] (II) AMDGPU(0): #5: hsize: 1680  vsize 1050  refresh: 60  vid: 179
[    21.278] (II) AMDGPU(0): #6: hsize: 1440  vsize 900  refresh: 60  vid: 149
[    21.278] (II) AMDGPU(0): Supported detailed timing:
[    21.278] (II) AMDGPU(0): clock: 533.2 MHz   Image Size:  697 x 392 mm
[    21.278] (II) AMDGPU(0): h_active: 3840  h_sync: 3888  h_sync_end 3920 h_blank_end 4000 h_border: 0
[    21.278] (II) AMDGPU(0): v_active: 2160  v_sync: 2163  v_sync_end 2168 v_blanking: 2222 v_border: 0
[    21.278] (II) AMDGPU(0): Ranges: V min: 40 V max: 60 Hz, H min: 134 H max: 134 kHz, PixClock max 605 MHz
[    21.278] (II) AMDGPU(0): Monitor name: U32J59x
[    21.278] (II) AMDGPU(0): Serial No: H4ZMB00716
[    21.278] (II) AMDGPU(0): Supported detailed timing:
[    21.278] (II) AMDGPU(0): clock: 148.5 MHz   Image Size:  697 x 392 mm
[    21.278] (II) AMDGPU(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[    21.278] (II) AMDGPU(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[    21.278] (II) AMDGPU(0): Supported detailed timing:
[    21.278] (II) AMDGPU(0): clock: 241.5 MHz   Image Size:  697 x 392 mm
[    21.278] (II) AMDGPU(0): h_active: 2560  h_sync: 2608  h_sync_end 2640 h_blank_end 2720 h_border: 0
[    21.278] (II) AMDGPU(0): v_active: 1440  v_sync: 1443  v_sync_end 1448 v_blanking: 1481 v_border: 0
[    21.278] (II) AMDGPU(0): Supported detailed timing:
[    21.278] (II) AMDGPU(0): clock: 297.0 MHz   Image Size:  697 x 392 mm
[    21.278] (II) AMDGPU(0): h_active: 3840  h_sync: 4016  h_sync_end 4104 h_blank_end 4400 h_border: 0
[    21.278] (II) AMDGPU(0): v_active: 2160  v_sync: 2168  v_sync_end 2178 v_blanking: 2250 v_border: 0
[    21.278] (II) AMDGPU(0): Number of EDID sections to follow: 1
[    21.278] (II) AMDGPU(0): EDID (in hex):
[    21.278] (II) AMDGPU(0):  00ffffffffffff004c2d350f425a5a42
[    21.278] (II) AMDGPU(0):  2c1d0104b54627783baea5af4f42af26
[    21.278] (II) AMDGPU(0):  0f5054bfef80714f810081c08180a9c0
[    21.278] (II) AMDGPU(0):  b300950001014dd000a0f0703e803020
[    21.278] (II) AMDGPU(0):  3500b9882100001a000000fd00283c86
[    21.278] (II) AMDGPU(0):  863c010a202020202020000000fc0055
[    21.278] (II) AMDGPU(0):  33324a3539780a2020202020000000ff
[    21.278] (II) AMDGPU(0):  0048345a4d4230303731360a202001e2
[    21.278] (II) AMDGPU(0):  02030ff042105f230907078301000002
[    21.278] (II) AMDGPU(0):  3a801871382d40582c4500b988210000
[    21.278] (II) AMDGPU(0):  1e565e00a0a0a0295030203500b98821
[    21.278] (II) AMDGPU(0):  00001a04740030f2705a80b0588a00b9
[    21.278] (II) AMDGPU(0):  882100001e0000000000000000000000
[    21.278] (II) AMDGPU(0):  00000000000000000000000000000000
[    21.278] (II) AMDGPU(0):  00000000000000000000000000000000
[    21.278] (II) AMDGPU(0):  00000000000000000000000000000056
[    21.278] (II) AMDGPU(0): Printing probed modes for output DisplayPort-0
[    21.278] (II) AMDGPU(0): Modeline "3840x2160"x60.0  533.25  3840 3888 3920 4000  2160 2163 2168 2222 +hsync -vsync (133.3 kHz eP)
[    21.278] (II) AMDGPU(0): Modeline "3840x2160"x30.0  297.00  3840 4016 4104 4400  2160 2168 2178 2250 +hsync +vsync (67.5 kHz e)
[    21.278] (II) AMDGPU(0): Modeline "3840x2160"x30.0  296.70  3840 4016 4104 4400  2160 2168 2178 2250 +hsync +vsync (67.4 kHz e)
[    21.278] (II) AMDGPU(0): Modeline "2560x1440"x60.0  241.50  2560 2608 2640 2720  1440 1443 1448 1481 +hsync -vsync (88.8 kHz e)
[    21.278] (II) AMDGPU(0): Modeline "1920x1200"x60.0  533.25  1920 3888 3920 4000  1200 2163 2168 2222 +hsync -vsync (133.3 kHz e)
[    21.278] (II) AMDGPU(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[    21.278] (II) AMDGPU(0): Modeline "1920x1080"x59.9  148.35  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[    21.278] (II) AMDGPU(0): Modeline "1600x1200"x60.0  533.25  1600 3888 3920 4000  1200 2163 2168 2222 +hsync -vsync (133.3 kHz e)
[    21.278] (II) AMDGPU(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[    21.278] (II) AMDGPU(0): Modeline "1600x900"x60.0  108.00  1600 1624 1704 1800  900 901 904 1000 +hsync +vsync (60.0 kHz e)
[    21.278] (II) AMDGPU(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    21.278] (II) AMDGPU(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    21.278] (II) AMDGPU(0): Modeline "1440x900"x59.9  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz e)
[    21.278] (II) AMDGPU(0): Modeline "1280x800"x59.8   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz e)
[    21.278] (II) AMDGPU(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    21.278] (II) AMDGPU(0): Modeline "1280x720"x60.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[    21.278] (II) AMDGPU(0): Modeline "1280x720"x59.9   74.18  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[    21.278] (II) AMDGPU(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    21.278] (II) AMDGPU(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    21.278] (II) AMDGPU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    21.278] (II) AMDGPU(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    21.278] (II) AMDGPU(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    21.278] (II) AMDGPU(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    21.278] (II) AMDGPU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    21.278] (II) AMDGPU(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    21.278] (II) AMDGPU(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    21.278] (II) AMDGPU(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[    21.278] (II) AMDGPU(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    21.278] (II) AMDGPU(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    21.278] (II) AMDGPU(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    21.278] (II) AMDGPU(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    21.278] (II) AMDGPU(0): EDID for output DisplayPort-1
[    21.278] (II) AMDGPU(0): EDID for output DisplayPort-2
[    21.278] (II) AMDGPU(0): EDID for output HDMI-A-0
[    21.278] (II) AMDGPU(0): Output DisplayPort-0 connected
[    21.278] (II) AMDGPU(0): Output DisplayPort-1 disconnected
[    21.278] (II) AMDGPU(0): Output DisplayPort-2 disconnected
[    21.278] (II) AMDGPU(0): Output HDMI-A-0 disconnected
[    21.278] (II) AMDGPU(0): Using exact sizes for initial modes
[    21.278] (II) AMDGPU(0): Output DisplayPort-0 using initial mode 3840x2160 +0+0
[    21.278] (II) AMDGPU(0): mem size init: gart size :3fe3d3000 vram size: s:3f9766000 visible:df97000
[    21.278] (==) AMDGPU(0): DPI set to (96, 96)
[    21.278] (==) AMDGPU(0): Using gamma correction (1.0, 1.0, 1.0)
[    21.278] (II) Loading sub module "ramdac"
[    21.278] (II) LoadModule: "ramdac"
[    21.278] (II) Module "ramdac" already built-in
[    21.278] (II) UnloadModule: "radeon"
[    21.278] (II) Unloading radeon
[    21.278] (II) UnloadModule: "modesetting"
[    21.278] (II) Unloading modesetting
[    21.278] (II) UnloadModule: "fbdev"
[    21.278] (II) Unloading fbdev
[    21.278] (II) UnloadSubModule: "fbdevhw"
[    21.278] (II) Unloading fbdevhw
[    21.278] (II) UnloadModule: "vesa"
[    21.278] (II) Unloading vesa
[    21.279] (II) AMDGPU(0): [DRI2] Setup complete
[    21.279] (II) AMDGPU(0): [DRI2]   DRI driver: radeonsi
[    21.279] (II) AMDGPU(0): [DRI2]   VDPAU driver: radeonsi
[    21.285] (II) AMDGPU(0): Front buffer pitch: 15360 bytes
[    21.286] (II) AMDGPU(0): SYNC extension fences enabled
[    21.286] (II) AMDGPU(0): Present extension enabled
[    21.286] (==) AMDGPU(0): DRI3 enabled
[    21.286] (==) AMDGPU(0): Backing store enabled
[    21.286] (II) AMDGPU(0): Direct rendering enabled
[    21.292] (II) AMDGPU(0): Use GLAMOR acceleration.
[    21.292] (II) AMDGPU(0): Acceleration enabled
[    21.292] (==) AMDGPU(0): DPMS enabled
[    21.292] (==) AMDGPU(0): Silken mouse enabled
[    21.292] (II) AMDGPU(0): Set up textured video (glamor)
[    21.309] (II) Initializing extension Generic Event Extension
[    21.309] (II) Initializing extension SHAPE
[    21.310] (II) Initializing extension MIT-SHM
[    21.310] (II) Initializing extension XInputExtension
[    21.310] (II) Initializing extension XTEST
[    21.310] (II) Initializing extension BIG-REQUESTS
[    21.310] (II) Initializing extension SYNC
[    21.310] (II) Initializing extension XKEYBOARD
[    21.310] (II) Initializing extension XC-MISC
[    21.310] (II) Initializing extension SECURITY
[    21.310] (II) Initializing extension XFIXES
[    21.310] (II) Initializing extension RENDER
[    21.311] (II) Initializing extension RANDR
[    21.311] (II) Initializing extension COMPOSITE
[    21.311] (II) Initializing extension DAMAGE
[    21.311] (II) Initializing extension MIT-SCREEN-SAVER
[    21.311] (II) Initializing extension DOUBLE-BUFFER
[    21.311] (II) Initializing extension RECORD
[    21.311] (II) Initializing extension DPMS
[    21.311] (II) Initializing extension Present
[    21.311] (II) Initializing extension DRI3
[    21.311] (II) Initializing extension X-Resource
[    21.311] (II) Initializing extension XVideo
[    21.311] (II) Initializing extension XVideo-MotionCompensation
[    21.311] (II) Initializing extension SELinux
[    21.311] (II) SELinux: Disabled on system
[    21.311] (II) Initializing extension GLX
[    21.315] (II) AIGLX: Loaded and initialized radeonsi
[    21.315] (II) GLX: Initialized DRI2 GL provider for screen 0
[    21.315] (II) Initializing extension XFree86-VidModeExtension
[    21.315] (II) Initializing extension XFree86-DGA
[    21.315] (II) Initializing extension XFree86-DRI
[    21.315] (II) Initializing extension DRI2
[    21.315] (II) AMDGPU(0): Setting screen physical size to 1016 x 571
[    21.376] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    21.376] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    21.376] (II) LoadModule: "libinput"
[    21.376] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    21.378] (II) Module libinput: vendor="X.Org Foundation"
[    21.378]  compiled for 1.21.1.3, module version = 1.2.1
[    21.378]  Module class: X.Org XInput Driver
[    21.378]  ABI class: X.Org XInput driver, version 24.4
[    21.378] (II) Using input driver 'libinput' for 'Power Button'
[    21.378] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 28 paused 0
[    21.378] (**) Power Button: always reports core events
[    21.378] (**) Option "Device" "/dev/input/event1"
[    21.379] (II) event1  - Power Button: is tagged by udev as: Keyboard
[    21.379] (II) event1  - Power Button: device is a keyboard
[    21.379] (II) event1  - Power Button: device removed
[    21.379] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[    21.379] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    21.379] (**) Option "xkb_model" "pc105"
[    21.379] (**) Option "xkb_layout" "fr"
[    21.380] (**) Option "xkb_variant" "latin9"
[    21.391] (II) event1  - Power Button: is tagged by udev as: Keyboard
[    21.391] (II) event1  - Power Button: device is a keyboard
[    21.392] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    21.392] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    21.392] (II) Using input driver 'libinput' for 'Power Button'
[    21.392] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 31 paused 0
[    21.392] (**) Power Button: always reports core events
[    21.392] (**) Option "Device" "/dev/input/event0"
[    21.392] (II) event0  - Power Button: is tagged by udev as: Keyboard
[    21.392] (II) event0  - Power Button: device is a keyboard
[    21.392] (II) event0  - Power Button: device removed
[    21.392] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[    21.392] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    21.393] (**) Option "xkb_model" "pc105"
[    21.393] (**) Option "xkb_layout" "fr"
[    21.393] (**) Option "xkb_variant" "latin9"
[    21.393] (II) event0  - Power Button: is tagged by udev as: Keyboard
[    21.393] (II) event0  - Power Button: device is a keyboard
[    21.394] (II) config/udev: Adding input device Kingston HyperX Virtual Surround Sound Consumer Control (/dev/input/event2)
[    21.394] (**) Kingston HyperX Virtual Surround Sound Consumer Control: Applying InputClass "libinput keyboard catchall"
[    21.394] (II) Using input driver 'libinput' for 'Kingston HyperX Virtual Surround Sound Consumer Control'
[    21.396] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 32 paused 0
[    21.396] (**) Kingston HyperX Virtual Surround Sound Consumer Control: always reports core events
[    21.396] (**) Option "Device" "/dev/input/event2"
[    21.397] (II) event2  - Kingston HyperX Virtual Surround Sound Consumer Control: is tagged by udev as: Keyboard
[    21.397] (II) event2  - Kingston HyperX Virtual Surround Sound Consumer Control: device is a keyboard
[    21.397] (II) event2  - Kingston HyperX Virtual Surround Sound Consumer Control: device removed
[    21.397] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:05:00.1/usb1/1-6/1-6:1.3/0003:0951:16A4.0003/input/input2/event2"
[    21.397] (II) XINPUT: Adding extended input device "Kingston HyperX Virtual Surround Sound Consumer Control" (type: KEYBOARD, id 8)
[    21.397] (**) Option "xkb_model" "pc105"
[    21.397] (**) Option "xkb_layout" "fr"
[    21.397] (**) Option "xkb_variant" "latin9"
[    21.398] (II) event2  - Kingston HyperX Virtual Surround Sound Consumer Control: is tagged by udev as: Keyboard
[    21.398] (II) event2  - Kingston HyperX Virtual Surround Sound Consumer Control: device is a keyboard
[    21.399] (II) config/udev: Adding input device Kingston HyperX Virtual Surround Sound (/dev/input/event3)
[    21.399] (**) Kingston HyperX Virtual Surround Sound: Applying InputClass "libinput keyboard catchall"
[    21.399] (II) Using input driver 'libinput' for 'Kingston HyperX Virtual Surround Sound'
[    21.401] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 33 paused 0
[    21.401] (**) Kingston HyperX Virtual Surround Sound: always reports core events
[    21.401] (**) Option "Device" "/dev/input/event3"
[    21.401] (II) event3  - Kingston HyperX Virtual Surround Sound: is tagged by udev as: Keyboard
[    21.401] (II) event3  - Kingston HyperX Virtual Surround Sound: device is a keyboard
[    21.402] (II) event3  - Kingston HyperX Virtual Surround Sound: device removed
[    21.402] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:05:00.1/usb1/1-6/1-6:1.3/0003:0951:16A4.0003/input/input3/event3"
[    21.402] (II) XINPUT: Adding extended input device "Kingston HyperX Virtual Surround Sound" (type: KEYBOARD, id 9)
[    21.402] (**) Option "xkb_model" "pc105"
[    21.402] (**) Option "xkb_layout" "fr"
[    21.402] (**) Option "xkb_variant" "latin9"
[    21.402] (II) event3  - Kingston HyperX Virtual Surround Sound: is tagged by udev as: Keyboard
[    21.403] (II) event3  - Kingston HyperX Virtual Surround Sound: device is a keyboard
[    21.403] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event12)
[    21.403] (II) No input driver specified, ignoring this device.
[    21.403] (II) This device may have been added with another device file.
[    21.403] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=7 (/dev/input/event13)
[    21.403] (II) No input driver specified, ignoring this device.
[    21.403] (II) This device may have been added with another device file.
[    21.403] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=8 (/dev/input/event14)
[    21.403] (II) No input driver specified, ignoring this device.
[    21.403] (II) This device may have been added with another device file.
[    21.404] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=9 (/dev/input/event15)
[    21.404] (II) No input driver specified, ignoring this device.
[    21.404] (II) This device may have been added with another device file.
[    21.404] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=10 (/dev/input/event16)
[    21.404] (II) No input driver specified, ignoring this device.
[    21.404] (II) This device may have been added with another device file.
[    21.404] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=11 (/dev/input/event17)
[    21.404] (II) No input driver specified, ignoring this device.
[    21.404] (II) This device may have been added with another device file.
[    21.404] (II) config/udev: Adding input device HP Webcam HD 4310: HP Webcam HD (/dev/input/event18)
[    21.404] (**) HP Webcam HD 4310: HP Webcam HD: Applying InputClass "libinput keyboard catchall"
[    21.404] (II) Using input driver 'libinput' for 'HP Webcam HD 4310: HP Webcam HD'
[    21.408] (II) systemd-logind: got fd for /dev/input/event18 13:82 fd 34 paused 0
[    21.408] (**) HP Webcam HD 4310: HP Webcam HD: always reports core events
[    21.408] (**) Option "Device" "/dev/input/event18"
[    21.409] (II) event18 - HP Webcam HD 4310: HP Webcam HD: is tagged by udev as: Keyboard
[    21.409] (II) event18 - HP Webcam HD 4310: HP Webcam HD: device is a keyboard
[    21.409] (II) event18 - HP Webcam HD 4310: HP Webcam HD: device removed
[    21.409] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:0c:00.3/usb5/5-2/5-2:1.0/input/input18/event18"
[    21.409] (II) XINPUT: Adding extended input device "HP Webcam HD 4310: HP Webcam HD" (type: KEYBOARD, id 10)
[    21.409] (**) Option "xkb_model" "pc105"
[    21.409] (**) Option "xkb_layout" "fr"
[    21.409] (**) Option "xkb_variant" "latin9"
[    21.410] (II) event18 - HP Webcam HD 4310: HP Webcam HD: is tagged by udev as: Keyboard
[    21.410] (II) event18 - HP Webcam HD 4310: HP Webcam HD: device is a keyboard
[    21.410] (II) config/udev: Adding input device HD-Audio Generic Front Mic (/dev/input/event19)
[    21.410] (II) No input driver specified, ignoring this device.
[    21.410] (II) This device may have been added with another device file.
[    21.410] (II) config/udev: Adding input device HD-Audio Generic Rear Mic (/dev/input/event20)
[    21.410] (II) No input driver specified, ignoring this device.
[    21.410] (II) This device may have been added with another device file.
[    21.410] (II) config/udev: Adding input device HD-Audio Generic Line (/dev/input/event21)
[    21.410] (II) No input driver specified, ignoring this device.
[    21.410] (II) This device may have been added with another device file.
[    21.411] (II) config/udev: Adding input device HD-Audio Generic Line Out Front (/dev/input/event22)
[    21.411] (II) No input driver specified, ignoring this device.
[    21.411] (II) This device may have been added with another device file.
[    21.411] (II) config/udev: Adding input device HD-Audio Generic Line Out Surround (/dev/input/event23)
[    21.411] (II) No input driver specified, ignoring this device.
[    21.411] (II) This device may have been added with another device file.
[    21.411] (II) config/udev: Adding input device HD-Audio Generic Line Out CLFE (/dev/input/event24)
[    21.411] (II) No input driver specified, ignoring this device.
[    21.411] (II) This device may have been added with another device file.
[    21.411] (II) config/udev: Adding input device HD-Audio Generic Front Headphone (/dev/input/event25)
[    21.411] (II) No input driver specified, ignoring this device.
[    21.411] (II) This device may have been added with another device file.
[    21.411] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event11)
[    21.411] (**) Eee PC WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[    21.411] (II) Using input driver 'libinput' for 'Eee PC WMI hotkeys'
[    21.412] (II) systemd-logind: got fd for /dev/input/event11 13:75 fd 35 paused 0
[    21.412] (**) Eee PC WMI hotkeys: always reports core events
[    21.412] (**) Option "Device" "/dev/input/event11"
[    21.412] (II) event11 - Eee PC WMI hotkeys: is tagged by udev as: Keyboard
[    21.412] (II) event11 - Eee PC WMI hotkeys: device is a keyboard
[    21.412] (II) event11 - Eee PC WMI hotkeys: device removed
[    21.412] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input11/event11"
[    21.412] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 11)
[    21.412] (**) Option "xkb_model" "pc105"
[    21.412] (**) Option "xkb_layout" "fr"
[    21.412] (**) Option "xkb_variant" "latin9"
[    21.413] (II) event11 - Eee PC WMI hotkeys: is tagged by udev as: Keyboard
[    21.413] (II) event11 - Eee PC WMI hotkeys: device is a keyboard
[    21.413] (II) config/udev: Adding input device PC Speaker (/dev/input/event10)
[    21.413] (II) No input driver specified, ignoring this device.
[    21.413] (II) This device may have been added with another device file.
[    21.413] (II) config/udev: Adding input device ckb1: Corsair Gaming K55 RGB Keyboard vKB (/dev/input/event4)
[    21.413] (**) ckb1: Corsair Gaming K55 RGB Keyboard vKB: Applying InputClass "libinput keyboard catchall"
[    21.413] (II) Using input driver 'libinput' for 'ckb1: Corsair Gaming K55 RGB Keyboard vKB'
[    21.414] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 36 paused 0
[    21.414] (**) ckb1: Corsair Gaming K55 RGB Keyboard vKB: always reports core events
[    21.414] (**) Option "Device" "/dev/input/event4"
[    21.414] (II) event4  - ckb1: Corsair Gaming K55 RGB Keyboard vKB: is tagged by udev as: Keyboard
[    21.414] (II) event4  - ckb1: Corsair Gaming K55 RGB Keyboard vKB: device is a keyboard
[    21.414] (II) event4  - ckb1: Corsair Gaming K55 RGB Keyboard vKB: device removed
[    21.414] (**) Option "config_info" "udev:/sys/devices/virtual/input/input26/event4"
[    21.414] (II) XINPUT: Adding extended input device "ckb1: Corsair Gaming K55 RGB Keyboard vKB" (type: KEYBOARD, id 12)
[    21.414] (**) Option "xkb_model" "pc105"
[    21.414] (**) Option "xkb_layout" "fr"
[    21.414] (**) Option "xkb_variant" "latin9"
[    21.414] (II) event4  - ckb1: Corsair Gaming K55 RGB Keyboard vKB: is tagged by udev as: Keyboard
[    21.414] (II) event4  - ckb1: Corsair Gaming K55 RGB Keyboard vKB: device is a keyboard
[    21.415] (II) config/udev: Adding input device ckb1: Corsair Gaming K55 RGB Keyboard vM (/dev/input/event5)
[    21.415] (**) ckb1: Corsair Gaming K55 RGB Keyboard vM: Applying InputClass "libinput pointer catchall"
[    21.415] (II) Using input driver 'libinput' for 'ckb1: Corsair Gaming K55 RGB Keyboard vM'
[    21.415] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 37 paused 0
[    21.415] (**) ckb1: Corsair Gaming K55 RGB Keyboard vM: always reports core events
[    21.415] (**) Option "Device" "/dev/input/event5"
[    21.415] (II) event5  - ckb1: Corsair Gaming K55 RGB Keyboard vM: is tagged by udev as: Mouse
[    21.415] (II) event5  - ckb1: Corsair Gaming K55 RGB Keyboard vM: device is a pointer
[    21.415] (II) event5  - ckb1: Corsair Gaming K55 RGB Keyboard vM: device removed
[    21.416] (**) Option "config_info" "udev:/sys/devices/virtual/input/input27/event5"
[    21.416] (II) XINPUT: Adding extended input device "ckb1: Corsair Gaming K55 RGB Keyboard vM" (type: MOUSE, id 13)
[    21.416] (**) Option "AccelerationScheme" "none"
[    21.416] (**) ckb1: Corsair Gaming K55 RGB Keyboard vM: (accel) selected scheme none/0
[    21.416] (**) ckb1: Corsair Gaming K55 RGB Keyboard vM: (accel) acceleration factor: 2.000
[    21.416] (**) ckb1: Corsair Gaming K55 RGB Keyboard vM: (accel) acceleration threshold: 4
[    21.416] (II) event5  - ckb1: Corsair Gaming K55 RGB Keyboard vM: is tagged by udev as: Mouse
[    21.416] (II) event5  - ckb1: Corsair Gaming K55 RGB Keyboard vM: device is a pointer
[    21.416] (II) config/udev: Adding input device ckb1: Corsair Gaming K55 RGB Keyboard vM (/dev/input/mouse0)
[    21.416] (II) No input driver specified, ignoring this device.
[    21.416] (II) This device may have been added with another device file.
[    21.416] (II) config/udev: Adding input device ckb2: Corsair Gaming M65 Pro RGB Mouse vKB (/dev/input/event6)
[    21.416] (**) ckb2: Corsair Gaming M65 Pro RGB Mouse vKB: Applying InputClass "libinput keyboard catchall"
[    21.416] (II) Using input driver 'libinput' for 'ckb2: Corsair Gaming M65 Pro RGB Mouse vKB'
[    21.417] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 38 paused 0
[    21.417] (**) ckb2: Corsair Gaming M65 Pro RGB Mouse vKB: always reports core events
[    21.417] (**) Option "Device" "/dev/input/event6"
[    21.417] (II) event6  - ckb2: Corsair Gaming M65 Pro RGB Mouse vKB: is tagged by udev as: Keyboard
[    21.417] (II) event6  - ckb2: Corsair Gaming M65 Pro RGB Mouse vKB: device is a keyboard
[    21.417] (II) event6  - ckb2: Corsair Gaming M65 Pro RGB Mouse vKB: device removed
[    21.417] (**) Option "config_info" "udev:/sys/devices/virtual/input/input28/event6"
[    21.417] (II) XINPUT: Adding extended input device "ckb2: Corsair Gaming M65 Pro RGB Mouse vKB" (type: KEYBOARD, id 14)
[    21.417] (**) Option "xkb_model" "pc105"
[    21.417] (**) Option "xkb_layout" "fr"
[    21.417] (**) Option "xkb_variant" "latin9"
[    21.417] (II) event6  - ckb2: Corsair Gaming M65 Pro RGB Mouse vKB: is tagged by udev as: Keyboard
[    21.418] (II) event6  - ckb2: Corsair Gaming M65 Pro RGB Mouse vKB: device is a keyboard
[    21.418] (II) config/udev: Adding input device ckb2: Corsair Gaming M65 Pro RGB Mouse vM (/dev/input/event7)
[    21.418] (**) ckb2: Corsair Gaming M65 Pro RGB Mouse vM: Applying InputClass "libinput pointer catchall"
[    21.418] (II) Using input driver 'libinput' for 'ckb2: Corsair Gaming M65 Pro RGB Mouse vM'
[    21.418] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 39 paused 0
[    21.418] (**) ckb2: Corsair Gaming M65 Pro RGB Mouse vM: always reports core events
[    21.418] (**) Option "Device" "/dev/input/event7"
[    21.418] (II) event7  - ckb2: Corsair Gaming M65 Pro RGB Mouse vM: is tagged by udev as: Mouse
[    21.418] (II) event7  - ckb2: Corsair Gaming M65 Pro RGB Mouse vM: device is a pointer
[    21.419] (II) event7  - ckb2: Corsair Gaming M65 Pro RGB Mouse vM: device removed
[    21.419] (**) Option "config_info" "udev:/sys/devices/virtual/input/input29/event7"
[    21.419] (II) XINPUT: Adding extended input device "ckb2: Corsair Gaming M65 Pro RGB Mouse vM" (type: MOUSE, id 15)
[    21.419] (**) Option "AccelerationScheme" "none"
[    21.419] (**) ckb2: Corsair Gaming M65 Pro RGB Mouse vM: (accel) selected scheme none/0
[    21.419] (**) ckb2: Corsair Gaming M65 Pro RGB Mouse vM: (accel) acceleration factor: 2.000
[    21.419] (**) ckb2: Corsair Gaming M65 Pro RGB Mouse vM: (accel) acceleration threshold: 4
[    21.419] (II) event7  - ckb2: Corsair Gaming M65 Pro RGB Mouse vM: is tagged by udev as: Mouse
[    21.419] (II) event7  - ckb2: Corsair Gaming M65 Pro RGB Mouse vM: device is a pointer
[    21.419] (II) config/udev: Adding input device ckb2: Corsair Gaming M65 Pro RGB Mouse vM (/dev/input/mouse1)
[    21.419] (II) No input driver specified, ignoring this device.
[    21.419] (II) This device may have been added with another device file.
[    21.745] (II) AMDGPU(0): EDID vendor "SAM", prod id 3893
[    21.745] (II) AMDGPU(0): Using EDID range info for horizontal sync
[    21.745] (II) AMDGPU(0): Using EDID range info for vertical refresh
[    21.745] (II) AMDGPU(0): Printing DDC gathered Modelines:
[    21.745] (II) AMDGPU(0): Modeline "3840x2160"x0.0  533.25  3840 3888 3920 4000  2160 2163 2168 2222 +hsync -vsync (133.3 kHz eP)
[    21.745] (II) AMDGPU(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[    21.745] (II) AMDGPU(0): Modeline "2560x1440"x0.0  241.50  2560 2608 2640 2720  1440 1443 1448 1481 +hsync -vsync (88.8 kHz e)
[    21.745] (II) AMDGPU(0): Modeline "3840x2160"x0.0  297.00  3840 4016 4104 4400  2160 2168 2178 2250 +hsync +vsync (67.5 kHz e)
[    21.745] (II) AMDGPU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    21.745] (II) AMDGPU(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    21.745] (II) AMDGPU(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    21.745] (II) AMDGPU(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[    21.745] (II) AMDGPU(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    21.745] (II) AMDGPU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    21.745] (II) AMDGPU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    21.745] (II) AMDGPU(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    21.745] (II) AMDGPU(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    21.745] (II) AMDGPU(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    21.745] (II) AMDGPU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    21.745] (II) AMDGPU(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    21.745] (II) AMDGPU(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    21.745] (II) AMDGPU(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    21.745] (II) AMDGPU(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    21.745] (II) AMDGPU(0): Modeline "1280x800"x0.0   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz e)
[    21.745] (II) AMDGPU(0): Modeline "(null)"x59.9   74.50  1280 1344 1472 1664  720 723 728 748 -hsync +vsync (44.8 kHz e)
[    21.745] (II) AMDGPU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    21.745] (II) AMDGPU(0): Modeline "(null)"x59.9  118.25  1600 1696 1856 2112  900 903 908 934 -hsync +vsync (56.0 kHz e)
[    21.745] (II) AMDGPU(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[    21.745] (II) AMDGPU(0): Modeline "1440x900"x0.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz e)
[    22.895] (II) AMDGPU(0): EDID vendor "SAM", prod id 3893
[    22.895] (II) AMDGPU(0): Using hsync ranges from config file
[    22.895] (II) AMDGPU(0): Using vrefresh ranges from config file
[    22.895] (II) AMDGPU(0): Printing DDC gathered Modelines:
[    22.895] (II) AMDGPU(0): Modeline "3840x2160"x0.0  533.25  3840 3888 3920 4000  2160 2163 2168 2222 +hsync -vsync (133.3 kHz eP)
[    22.895] (II) AMDGPU(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[    22.895] (II) AMDGPU(0): Modeline "2560x1440"x0.0  241.50  2560 2608 2640 2720  1440 1443 1448 1481 +hsync -vsync (88.8 kHz e)
[    22.895] (II) AMDGPU(0): Modeline "3840x2160"x0.0  297.00  3840 4016 4104 4400  2160 2168 2178 2250 +hsync +vsync (67.5 kHz e)
[    22.895] (II) AMDGPU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    22.895] (II) AMDGPU(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    22.895] (II) AMDGPU(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    22.895] (II) AMDGPU(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[    22.895] (II) AMDGPU(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    22.895] (II) AMDGPU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    22.895] (II) AMDGPU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    22.895] (II) AMDGPU(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    22.895] (II) AMDGPU(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    22.895] (II) AMDGPU(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    22.895] (II) AMDGPU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    22.895] (II) AMDGPU(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    22.895] (II) AMDGPU(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    22.895] (II) AMDGPU(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    22.895] (II) AMDGPU(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    22.895] (II) AMDGPU(0): Modeline "1280x800"x0.0   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz e)
[    22.895] (II) AMDGPU(0): Modeline "(null)"x59.9   74.50  1280 1344 1472 1664  720 723 728 748 -hsync +vsync (44.8 kHz e)
[    22.895] (II) AMDGPU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    22.895] (II) AMDGPU(0): Modeline "(null)"x59.9  118.25  1600 1696 1856 2112  900 903 908 934 -hsync +vsync (56.0 kHz e)
[    22.895] (II) AMDGPU(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[    22.895] (II) AMDGPU(0): Modeline "1440x900"x0.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz e)
[    23.507] (II) AMDGPU(0): EDID vendor "SAM", prod id 3893
[    23.507] (II) AMDGPU(0): Using hsync ranges from config file
[    23.507] (II) AMDGPU(0): Using vrefresh ranges from config file
[    23.507] (II) AMDGPU(0): Printing DDC gathered Modelines:
[    23.507] (II) AMDGPU(0): Modeline "3840x2160"x0.0  533.25  3840 3888 3920 4000  2160 2163 2168 2222 +hsync -vsync (133.3 kHz eP)
[    23.507] (II) AMDGPU(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[    23.507] (II) AMDGPU(0): Modeline "2560x1440"x0.0  241.50  2560 2608 2640 2720  1440 1443 1448 1481 +hsync -vsync (88.8 kHz e)
[    23.507] (II) AMDGPU(0): Modeline "3840x2160"x0.0  297.00  3840 4016 4104 4400  2160 2168 2178 2250 +hsync +vsync (67.5 kHz e)
[    23.507] (II) AMDGPU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    23.507] (II) AMDGPU(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    23.507] (II) AMDGPU(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    23.507] (II) AMDGPU(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[    23.507] (II) AMDGPU(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    23.507] (II) AMDGPU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    23.507] (II) AMDGPU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    23.507] (II) AMDGPU(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    23.507] (II) AMDGPU(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    23.507] (II) AMDGPU(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    23.507] (II) AMDGPU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    23.507] (II) AMDGPU(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    23.507] (II) AMDGPU(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    23.507] (II) AMDGPU(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    23.507] (II) AMDGPU(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    23.507] (II) AMDGPU(0): Modeline "1280x800"x0.0   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz e)
[    23.507] (II) AMDGPU(0): Modeline "(null)"x59.9   74.50  1280 1344 1472 1664  720 723 728 748 -hsync +vsync (44.8 kHz e)
[    23.507] (II) AMDGPU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    23.507] (II) AMDGPU(0): Modeline "(null)"x59.9  118.25  1600 1696 1856 2112  900 903 908 934 -hsync +vsync (56.0 kHz e)
[    23.507] (II) AMDGPU(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[    23.507] (II) AMDGPU(0): Modeline "1440x900"x0.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz e)
[    66.165] (II) AMDGPU(0): EDID vendor "SAM", prod id 3893
[    66.165] (II) AMDGPU(0): Using hsync ranges from config file
[    66.165] (II) AMDGPU(0): Using vrefresh ranges from config file
[    66.165] (II) AMDGPU(0): Printing DDC gathered Modelines:
[    66.165] (II) AMDGPU(0): Modeline "3840x2160"x0.0  533.25  3840 3888 3920 4000  2160 2163 2168 2222 +hsync -vsync (133.3 kHz eP)
[    66.165] (II) AMDGPU(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[    66.165] (II) AMDGPU(0): Modeline "2560x1440"x0.0  241.50  2560 2608 2640 2720  1440 1443 1448 1481 +hsync -vsync (88.8 kHz e)
[    66.165] (II) AMDGPU(0): Modeline "3840x2160"x0.0  297.00  3840 4016 4104 4400  2160 2168 2178 2250 +hsync +vsync (67.5 kHz e)
[    66.165] (II) AMDGPU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    66.165] (II) AMDGPU(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    66.165] (II) AMDGPU(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    66.165] (II) AMDGPU(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[    66.165] (II) AMDGPU(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    66.165] (II) AMDGPU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    66.165] (II) AMDGPU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    66.165] (II) AMDGPU(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    66.165] (II) AMDGPU(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    66.165] (II) AMDGPU(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    66.165] (II) AMDGPU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    66.165] (II) AMDGPU(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    66.165] (II) AMDGPU(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    66.165] (II) AMDGPU(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    66.165] (II) AMDGPU(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    66.165] (II) AMDGPU(0): Modeline "1280x800"x0.0   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz e)
[    66.165] (II) AMDGPU(0): Modeline "(null)"x59.9   74.50  1280 1344 1472 1664  720 723 728 748 -hsync +vsync (44.8 kHz e)
[    66.165] (II) AMDGPU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    66.165] (II) AMDGPU(0): Modeline "(null)"x59.9  118.25  1600 1696 1856 2112  900 903 908 934 -hsync +vsync (56.0 kHz e)
[    66.165] (II) AMDGPU(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[    66.165] (II) AMDGPU(0): Modeline "1440x900"x0.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz e)
[    66.171] (II) AMDGPU(0): Allocate new frame buffer 7680x2160
[    66.171] (II) AMDGPU(0):  => pitch 30720 bytes
[    66.382] (**) Option "fd" "28"
[    66.382] (II) event1  - Power Button: device removed
[    66.383] (**) Option "fd" "31"
[    66.383] (II) event0  - Power Button: device removed
[    66.383] (**) Option "fd" "32"
[    66.383] (II) event2  - Kingston HyperX Virtual Surround Sound Consumer Control: device removed
[    66.383] (**) Option "fd" "33"
[    66.383] (II) event3  - Kingston HyperX Virtual Surround Sound: device removed
[    66.383] (**) Option "fd" "34"
[    66.383] (II) event18 - HP Webcam HD 4310: HP Webcam HD: device removed
[    66.383] (**) Option "fd" "35"
[    66.383] (II) event11 - Eee PC WMI hotkeys: device removed
[    66.383] (**) Option "fd" "36"
[    66.383] (II) event4  - ckb1: Corsair Gaming K55 RGB Keyboard vKB: device removed
[    66.383] (**) Option "fd" "37"
[    66.383] (II) event5  - ckb1: Corsair Gaming K55 RGB Keyboard vM: device removed
[    66.383] (**) Option "fd" "38"
[    66.383] (II) event6  - ckb2: Corsair Gaming M65 Pro RGB Mouse vKB: device removed
[    66.383] (**) Option "fd" "39"
[    66.383] (II) event7  - ckb2: Corsair Gaming M65 Pro RGB Mouse vM: device removed
[    66.384] (II) AIGLX: Suspending AIGLX clients for VT switch
[    66.412] (II) systemd-logind: got pause for 13:71
[    66.412] (II) systemd-logind: got pause for 13:75
[    66.412] (II) systemd-logind: got pause for 13:69
[    66.412] (II) systemd-logind: got pause for 13:67
[    66.412] (II) systemd-logind: got pause for 13:65
[    66.412] (II) systemd-logind: got pause for 13:82
[    66.412] (II) systemd-logind: got pause for 13:64
[    66.412] (II) systemd-logind: got pause for 13:70
[    66.412] (II) systemd-logind: got pause for 13:68
[    66.412] (II) systemd-logind: got pause for 13:66
[    85.976] (II) systemd-logind: got resume for 13:71
[    86.012] (II) systemd-logind: got resume for 13:75
[    86.039] (II) systemd-logind: got resume for 13:69
[    86.075] (II) systemd-logind: got resume for 13:67
[    86.107] (II) systemd-logind: got resume for 13:65
[    86.128] (II) systemd-logind: got resume for 13:82
[    86.128] (II) systemd-logind: got resume for 226:0
[    86.128] (II) AIGLX: Resuming AIGLX clients after VT switch
[    86.172] (II) AMDGPU(0): EDID vendor "SAM", prod id 3893
[    86.172] (II) AMDGPU(0): Using hsync ranges from config file
[    86.172] (II) AMDGPU(0): Using vrefresh ranges from config file
[    86.172] (II) AMDGPU(0): Printing DDC gathered Modelines:
[    86.172] (II) AMDGPU(0): Modeline "3840x2160"x0.0  533.25  3840 3888 3920 4000  2160 2163 2168 2222 +hsync -vsync (133.3 kHz eP)
[    86.172] (II) AMDGPU(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[    86.172] (II) AMDGPU(0): Modeline "2560x1440"x0.0  241.50  2560 2608 2640 2720  1440 1443 1448 1481 +hsync -vsync (88.8 kHz e)
[    86.172] (II) AMDGPU(0): Modeline "3840x2160"x0.0  297.00  3840 4016 4104 4400  2160 2168 2178 2250 +hsync +vsync (67.5 kHz e)
[    86.172] (II) AMDGPU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    86.172] (II) AMDGPU(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    86.172] (II) AMDGPU(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    86.172] (II) AMDGPU(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[    86.173] (II) AMDGPU(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    86.173] (II) AMDGPU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    86.173] (II) AMDGPU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    86.173] (II) AMDGPU(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    86.173] (II) AMDGPU(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    86.173] (II) AMDGPU(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    86.173] (II) AMDGPU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    86.173] (II) AMDGPU(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    86.173] (II) AMDGPU(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    86.173] (II) AMDGPU(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    86.173] (II) AMDGPU(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    86.173] (II) AMDGPU(0): Modeline "1280x800"x0.0   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz e)
[    86.173] (II) AMDGPU(0): Modeline "(null)"x59.9   74.50  1280 1344 1472 1664  720 723 728 748 -hsync +vsync (44.8 kHz e)
[    86.173] (II) AMDGPU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    86.173] (II) AMDGPU(0): Modeline "(null)"x59.9  118.25  1600 1696 1856 2112  900 903 908 934 -hsync +vsync (56.0 kHz e)
[    86.173] (II) AMDGPU(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[    86.173] (II) AMDGPU(0): Modeline "1440x900"x0.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz e)
[    86.188] (II) event1  - Power Button: is tagged by udev as: Keyboard
[    86.189] (II) event1  - Power Button: device is a keyboard
[    86.190] (II) event3  - Kingston HyperX Virtual Surround Sound: is tagged by udev as: Keyboard
[    86.191] (II) event3  - Kingston HyperX Virtual Surround Sound: device is a keyboard
[    86.192] (II) event18 - HP Webcam HD 4310: HP Webcam HD: is tagged by udev as: Keyboard
[    86.192] (II) event18 - HP Webcam HD 4310: HP Webcam HD: device is a keyboard
[    86.193] (II) event11 - Eee PC WMI hotkeys: is tagged by udev as: Keyboard
[    86.193] (II) event11 - Eee PC WMI hotkeys: device is a keyboard
[    86.194] (II) event5  - ckb1: Corsair Gaming K55 RGB Keyboard vM: is tagged by udev as: Mouse
[    86.194] (II) event5  - ckb1: Corsair Gaming K55 RGB Keyboard vM: device is a pointer
[    86.195] (II) event7  - ckb2: Corsair Gaming M65 Pro RGB Mouse vM: is tagged by udev as: Mouse
[    86.195] (II) event7  - ckb2: Corsair Gaming M65 Pro RGB Mouse vM: device is a pointer
[    86.196] (II) systemd-logind: got resume for 13:64
[    86.196] (II) event0  - Power Button: is tagged by udev as: Keyboard
[    86.196] (II) event0  - Power Button: device is a keyboard
[    86.197] (II) systemd-logind: got resume for 13:70
[    86.197] (II) event6  - ckb2: Corsair Gaming M65 Pro RGB Mouse vKB: is tagged by udev as: Keyboard
[    86.197] (II) event6  - ckb2: Corsair Gaming M65 Pro RGB Mouse vKB: device is a keyboard
[    86.198] (II) systemd-logind: got resume for 13:68
[    86.198] (II) event4  - ckb1: Corsair Gaming K55 RGB Keyboard vKB: is tagged by udev as: Keyboard
[    86.198] (II) event4  - ckb1: Corsair Gaming K55 RGB Keyboard vKB: device is a keyboard
[    86.209] (II) systemd-logind: got resume for 13:66
[    86.211] (II) event2  - Kingston HyperX Virtual Surround Sound Consumer Control: is tagged by udev as: Keyboard
[    86.211] (II) event2  - Kingston HyperX Virtual Surround Sound Consumer Control: device is a keyboard
[    86.322] (II) AMDGPU(0): EDID vendor "SAM", prod id 3893
[    86.322] (II) AMDGPU(0): Using hsync ranges from config file
[    86.322] (II) AMDGPU(0): Using vrefresh ranges from config file
[    86.322] (II) AMDGPU(0): Printing DDC gathered Modelines:
[    86.322] (II) AMDGPU(0): Modeline "3840x2160"x0.0  533.25  3840 3888 3920 4000  2160 2163 2168 2222 +hsync -vsync (133.3 kHz eP)
[    86.322] (II) AMDGPU(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[    86.322] (II) AMDGPU(0): Modeline "2560x1440"x0.0  241.50  2560 2608 2640 2720  1440 1443 1448 1481 +hsync -vsync (88.8 kHz e)
[    86.322] (II) AMDGPU(0): Modeline "3840x2160"x0.0  297.00  3840 4016 4104 4400  2160 2168 2178 2250 +hsync +vsync (67.5 kHz e)
[    86.322] (II) AMDGPU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    86.322] (II) AMDGPU(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    86.322] (II) AMDGPU(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    86.322] (II) AMDGPU(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[    86.322] (II) AMDGPU(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    86.322] (II) AMDGPU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    86.322] (II) AMDGPU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    86.322] (II) AMDGPU(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    86.322] (II) AMDGPU(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    86.322] (II) AMDGPU(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    86.322] (II) AMDGPU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    86.322] (II) AMDGPU(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    86.322] (II) AMDGPU(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    86.322] (II) AMDGPU(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    86.322] (II) AMDGPU(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    86.322] (II) AMDGPU(0): Modeline "1280x800"x0.0   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz e)
[    86.322] (II) AMDGPU(0): Modeline "(null)"x59.9   74.50  1280 1344 1472 1664  720 723 728 748 -hsync +vsync (44.8 kHz e)
[    86.322] (II) AMDGPU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    86.322] (II) AMDGPU(0): Modeline "(null)"x59.9  118.25  1600 1696 1856 2112  900 903 908 934 -hsync +vsync (56.0 kHz e)
[    86.322] (II) AMDGPU(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[    86.322] (II) AMDGPU(0): Modeline "1440x900"x0.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz e)
[    87.625] (II) AMDGPU(0): EDID vendor "SAM", prod id 3893
[    87.625] (II) AMDGPU(0): Using hsync ranges from config file
[    87.625] (II) AMDGPU(0): Using vrefresh ranges from config file
[    87.625] (II) AMDGPU(0): Printing DDC gathered Modelines:
[    87.625] (II) AMDGPU(0): Modeline "3840x2160"x0.0  533.25  3840 3888 3920 4000  2160 2163 2168 2222 +hsync -vsync (133.3 kHz eP)
[    87.625] (II) AMDGPU(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[    87.625] (II) AMDGPU(0): Modeline "2560x1440"x0.0  241.50  2560 2608 2640 2720  1440 1443 1448 1481 +hsync -vsync (88.8 kHz e)
[    87.625] (II) AMDGPU(0): Modeline "3840x2160"x0.0  297.00  3840 4016 4104 4400  2160 2168 2178 2250 +hsync +vsync (67.5 kHz e)
[    87.625] (II) AMDGPU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    87.625] (II) AMDGPU(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    87.625] (II) AMDGPU(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    87.625] (II) AMDGPU(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[    87.625] (II) AMDGPU(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    87.625] (II) AMDGPU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    87.625] (II) AMDGPU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    87.625] (II) AMDGPU(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    87.625] (II) AMDGPU(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    87.625] (II) AMDGPU(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    87.625] (II) AMDGPU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    87.625] (II) AMDGPU(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    87.625] (II) AMDGPU(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    87.625] (II) AMDGPU(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    87.625] (II) AMDGPU(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    87.625] (II) AMDGPU(0): Modeline "1280x800"x0.0   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz e)
[    87.625] (II) AMDGPU(0): Modeline "(null)"x59.9   74.50  1280 1344 1472 1664  720 723 728 748 -hsync +vsync (44.8 kHz e)
[    87.625] (II) AMDGPU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    87.625] (II) AMDGPU(0): Modeline "(null)"x59.9  118.25  1600 1696 1856 2112  900 903 908 934 -hsync +vsync (56.0 kHz e)
[    87.625] (II) AMDGPU(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[    87.625] (II) AMDGPU(0): Modeline "1440x900"x0.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz e)
[    87.657] (II) AMDGPU(0): EDID vendor "SAM", prod id 3893
[    87.657] (II) AMDGPU(0): Using hsync ranges from config file
[    87.657] (II) AMDGPU(0): Using vrefresh ranges from config file
[    87.657] (II) AMDGPU(0): Printing DDC gathered Modelines:
[    87.657] (II) AMDGPU(0): Modeline "3840x2160"x0.0  533.25  3840 3888 3920 4000  2160 2163 2168 2222 +hsync -vsync (133.3 kHz eP)
[    87.657] (II) AMDGPU(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[    87.657] (II) AMDGPU(0): Modeline "2560x1440"x0.0  241.50  2560 2608 2640 2720  1440 1443 1448 1481 +hsync -vsync (88.8 kHz e)
[    87.657] (II) AMDGPU(0): Modeline "3840x2160"x0.0  297.00  3840 4016 4104 4400  2160 2168 2178 2250 +hsync +vsync (67.5 kHz e)
[    87.657] (II) AMDGPU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    87.657] (II) AMDGPU(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    87.657] (II) AMDGPU(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    87.657] (II) AMDGPU(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[    87.657] (II) AMDGPU(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    87.657] (II) AMDGPU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    87.657] (II) AMDGPU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    87.657] (II) AMDGPU(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    87.657] (II) AMDGPU(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    87.657] (II) AMDGPU(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    87.657] (II) AMDGPU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    87.657] (II) AMDGPU(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    87.657] (II) AMDGPU(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    87.657] (II) AMDGPU(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    87.657] (II) AMDGPU(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    87.657] (II) AMDGPU(0): Modeline "1280x800"x0.0   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz e)
[    87.657] (II) AMDGPU(0): Modeline "(null)"x59.9   74.50  1280 1344 1472 1664  720 723 728 748 -hsync +vsync (44.8 kHz e)
[    87.657] (II) AMDGPU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    87.657] (II) AMDGPU(0): Modeline "(null)"x59.9  118.25  1600 1696 1856 2112  900 903 908 934 -hsync +vsync (56.0 kHz e)
[    87.657] (II) AMDGPU(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[    87.657] (II) AMDGPU(0): Modeline "1440x900"x0.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz e)
[   230.435] (EE) event4  - ckb1: Corsair Gaming K55 RGB Keyboard vKB: client bug: event processing lagging behind by 31ms, your system is too slow

 

Hors ligne

#75 30-03-2022 16:22:54

Debian Alain
Membre
Lieu : Bretagne
Distrib. : bookworm unstable sid / bullseye (stable)
Noyau : Linux sid 5.17.0-1-amd64
(G)UI : Gnome X.org (X11) / GDM3
Inscription : 11-03-2017
Site Web

Re : [abandonné] transferts de fichiers / impression impossibles

j' ai installé mate-core .

je verrai çà plus tard .
sans doute demain ou peut être ce soir .

Hors ligne

Pied de page des forums